diff options
Diffstat (limited to 'os/hal/ports/STM32/STM32F0xx/adc_lld.h')
| -rw-r--r-- | os/hal/ports/STM32/STM32F0xx/adc_lld.h | 329 |
1 files changed, 329 insertions, 0 deletions
diff --git a/os/hal/ports/STM32/STM32F0xx/adc_lld.h b/os/hal/ports/STM32/STM32F0xx/adc_lld.h new file mode 100644 index 000000000..bddb6453a --- /dev/null +++ b/os/hal/ports/STM32/STM32F0xx/adc_lld.h @@ -0,0 +1,329 @@ +/*
+ ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+/**
+ * @file STM32F0xx/adc_lld.h
+ * @brief STM32F0xx ADC subsystem low level driver header.
+ *
+ * @addtogroup ADC
+ * @{
+ */
+
+#ifndef _ADC_LLD_H_
+#define _ADC_LLD_H_
+
+#if HAL_USE_ADC || defined(__DOXYGEN__)
+
+/*===========================================================================*/
+/* Driver constants. */
+/*===========================================================================*/
+
+/**
+ * @name Sampling rates
+ * @{
+ */
+#define ADC_SMPR_SMP_1P5 0 /**< @brief 14 cycles conversion time */
+#define ADC_SMPR_SMP_7P5 1 /**< @brief 21 cycles conversion time. */
+#define ADC_SMPR_SMP_13P5 2 /**< @brief 28 cycles conversion time. */
+#define ADC_SMPR_SMP_28P5 3 /**< @brief 41 cycles conversion time. */
+#define ADC_SMPR_SMP_41P5 4 /**< @brief 54 cycles conversion time. */
+#define ADC_SMPR_SMP_55P5 5 /**< @brief 68 cycles conversion time. */
+#define ADC_SMPR_SMP_71P5 6 /**< @brief 84 cycles conversion time. */
+#define ADC_SMPR_SMP_239P5 7 /**< @brief 252 cycles conversion time. */
+/** @} */
+
+/**
+ * @name Resolution
+ * @{
+ */
+#define ADC_CFGR1_RES_12BIT (0 << 3)
+#define ADC_CFGR1_RES_10BIT (1 << 3)
+#define ADC_CFGR1_RES_8BIT (2 << 3)
+#define ADC_CFGR1_RES_6BIT (3 << 3)
+/** @} */
+
+/**
+ * @name Threashold register initializer
+ * @{
+ */
+#define ADC_TR(low, high) (((uint32_t)(high) << 16) | (uint32_t)(low))
+/** @} */
+
+/*===========================================================================*/
+/* Driver pre-compile time settings. */
+/*===========================================================================*/
+
+/**
+ * @name Configuration options
+ * @{
+ */
+/**
+ * @brief ADC1 driver enable switch.
+ * @details If set to @p TRUE the support for ADC1 is included.
+ * @note The default is @p FALSE.
+ */
+#if !defined(STM32_ADC_USE_ADC1) || defined(__DOXYGEN__)
+#define STM32_ADC_USE_ADC1 FALSE
+#endif
+
+/**
+ * @brief ADC1 DMA priority (0..3|lowest..highest).
+ */
+#if !defined(STM32_ADC_ADC1_DMA_PRIORITY) || defined(__DOXYGEN__)
+#define STM32_ADC_ADC1_DMA_PRIORITY 2
+#endif
+
+/**
+ * @brief ADC interrupt priority level setting.
+ */
+#if !defined(STM32_ADC_IRQ_PRIORITY) || defined(__DOXYGEN__)
+#define STM32_ADC_IRQ_PRIORITY 2
+#endif
+
+/**
+ * @brief ADC1 DMA interrupt priority level setting.
+ */
+#if !defined(STM32_ADC_ADC1_DMA_IRQ_PRIORITY) || defined(__DOXYGEN__)
+#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 2
+#endif
+
+/** @} */
+
+/*===========================================================================*/
+/* Derived constants and error checks. */
+/*===========================================================================*/
+
+#if STM32_ADC_USE_ADC1 && !STM32_HAS_ADC1
+#error "ADC1 not present in the selected device"
+#endif
+
+#if !STM32_ADC_USE_ADC1
+#error "ADC driver activated but no ADC peripheral assigned"
+#endif
+
+#if STM32_ADC_USE_ADC1 && \
+ !CORTEX_IS_VALID_KERNEL_PRIORITY(STM32_ADC_IRQ_PRIORITY)
+#error "Invalid IRQ priority assigned to ADC1"
+#endif
+
+#if STM32_ADC_USE_ADC1 && \
+ !CORTEX_IS_VALID_KERNEL_PRIORITY(STM32_ADC_ADC1_DMA_IRQ_PRIORITY)
+#error "Invalid IRQ priority assigned to ADC1 DMA"
+#endif
+
+#if STM32_ADC_USE_ADC1 && \
+ !STM32_DMA_IS_VALID_PRIORITY(STM32_ADC_ADC1_DMA_PRIORITY)
+#error "Invalid DMA priority assigned to ADC1"
+#endif
+
+#if !defined(STM32_DMA_REQUIRED)
+#define STM32_DMA_REQUIRED
+#endif
+
+/*===========================================================================*/
+/* Driver data structures and types. */
+/*===========================================================================*/
+
+/**
+ * @brief ADC sample data type.
+ */
+typedef uint16_t adcsample_t;
+
+/**
+ * @brief Channels number in a conversion group.
+ */
+typedef uint16_t adc_channels_num_t;
+
+/**
+ * @brief Possible ADC failure causes.
+ * @note Error codes are architecture dependent and should not relied
+ * upon.
+ */
+typedef enum {
+ ADC_ERR_DMAFAILURE = 0, /**< DMA operations failure. */
+ ADC_ERR_OVERFLOW = 1, /**< ADC overflow condition. */
+ ADC_ERR_AWD = 2 /**< Analog watchdog triggered. */
+} adcerror_t;
+
+/**
+ * @brief Type of a structure representing an ADC driver.
+ */
+typedef struct ADCDriver ADCDriver;
+
+/**
+ * @brief ADC notification callback type.
+ *
+ * @param[in] adcp pointer to the @p ADCDriver object triggering the
+ * callback
+ * @param[in] buffer pointer to the most recent samples data
+ * @param[in] n number of buffer rows available starting from @p buffer
+ */
+typedef void (*adccallback_t)(ADCDriver *adcp, adcsample_t *buffer, size_t n);
+
+/**
+ * @brief ADC error callback type.
+ *
+ * @param[in] adcp pointer to the @p ADCDriver object triggering the
+ * callback
+ * @param[in] err ADC error code
+ */
+typedef void (*adcerrorcallback_t)(ADCDriver *adcp, adcerror_t err);
+
+/**
+ * @brief Conversion group configuration structure.
+ * @details This implementation-dependent structure describes a conversion
+ * operation.
+ * @note The use of this configuration structure requires knowledge of
+ * STM32 ADC cell registers interface, please refer to the STM32
+ * reference manual for details.
+ */
+typedef struct {
+ /**
+ * @brief Enables the circular buffer mode for the group.
+ */
+ bool circular;
+ /**
+ * @brief Number of the analog channels belonging to the conversion group.
+ */
+ adc_channels_num_t num_channels;
+ /**
+ * @brief Callback function associated to the group or @p NULL.
+ */
+ adccallback_t end_cb;
+ /**
+ * @brief Error callback or @p NULL.
+ */
+ adcerrorcallback_t error_cb;
+ /* End of the mandatory fields.*/
+ /**
+ * @brief ADC CFGR1 register initialization data.
+ */
+ uint32_t cfgr1;
+ /**
+ * @brief ADC TR register initialization data.
+ */
+ uint32_t tr;
+ /**
+ * @brief ADC SMPR register initialization data.
+ */
+ uint32_t smpr;
+ /**
+ * @brief ADC CHSELR register initialization data.
+ * @details The number of bits at logic level one in this register must
+ * be equal to the number in the @p num_channels field.
+ */
+ uint32_t chselr;
+} ADCConversionGroup;
+
+/**
+ * @brief Driver configuration structure.
+ * @note It could be empty on some architectures.
+ */
+typedef struct {
+ uint32_t dummy;
+} ADCConfig;
+
+/**
+ * @brief Structure representing an ADC driver.
+ */
+struct ADCDriver {
+ /**
+ * @brief Driver state.
+ */
+ adcstate_t state;
+ /**
+ * @brief Current configuration data.
+ */
+ const ADCConfig *config;
+ /**
+ * @brief Current samples buffer pointer or @p NULL.
+ */
+ adcsample_t *samples;
+ /**
+ * @brief Current samples buffer depth or @p 0.
+ */
+ size_t depth;
+ /**
+ * @brief Current conversion group pointer or @p NULL.
+ */
+ const ADCConversionGroup *grpp;
+#if ADC_USE_WAIT || defined(__DOXYGEN__)
+ /**
+ * @brief Waiting thread.
+ */
+ thread_reference_t thread;
+#endif
+#if ADC_USE_MUTUAL_EXCLUSION || defined(__DOXYGEN__)
+ /**
+ * @brief Mutex protecting the peripheral.
+ */
+ mutex_t mutex;
+#endif /* ADC_USE_MUTUAL_EXCLUSION */
+#if defined(ADC_DRIVER_EXT_FIELDS)
+ ADC_DRIVER_EXT_FIELDS
+#endif
+ /* End of the mandatory fields.*/
+ /**
+ * @brief Pointer to the ADCx registers block.
+ */
+ ADC_TypeDef *adc;
+ /**
+ * @brief Pointer to associated DMA channel.
+ */
+ const stm32_dma_stream_t *dmastp;
+ /**
+ * @brief DMA mode bit mask.
+ */
+ uint32_t dmamode;
+};
+
+/*===========================================================================*/
+/* Driver macros. */
+/*===========================================================================*/
+
+/**
+ * @brief Changes the value of the ADC CCR register.
+ * @details Use this function in order to enable or disable the internal
+ * analog sources. See the documentation in the STM32F0xx Reference
+ * Manual.
+ */
+#define adcSTM32SetCCR(ccr) (ADC->CCR = (ccr))
+
+/*===========================================================================*/
+/* External declarations. */
+/*===========================================================================*/
+
+#if STM32_ADC_USE_ADC1 && !defined(__DOXYGEN__)
+extern ADCDriver ADCD1;
+#endif
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+ void adc_lld_init(void);
+ void adc_lld_start(ADCDriver *adcp);
+ void adc_lld_stop(ADCDriver *adcp);
+ void adc_lld_start_conversion(ADCDriver *adcp);
+ void adc_lld_stop_conversion(ADCDriver *adcp);
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* HAL_USE_ADC */
+
+#endif /* _ADC_LLD_H_ */
+
+/** @} */
|