diff options
Diffstat (limited to 'os/hal/ports/STM32/LLD/TIMv1/hal_pwm_lld.h')
-rw-r--r-- | os/hal/ports/STM32/LLD/TIMv1/hal_pwm_lld.h | 550 |
1 files changed, 550 insertions, 0 deletions
diff --git a/os/hal/ports/STM32/LLD/TIMv1/hal_pwm_lld.h b/os/hal/ports/STM32/LLD/TIMv1/hal_pwm_lld.h new file mode 100644 index 000000000..981312f38 --- /dev/null +++ b/os/hal/ports/STM32/LLD/TIMv1/hal_pwm_lld.h @@ -0,0 +1,550 @@ +/*
+ ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+/**
+ * @file STM32/pwm_lld.h
+ * @brief STM32 PWM subsystem low level driver header.
+ *
+ * @addtogroup PWM
+ * @{
+ */
+
+#ifndef _PWM_LLD_H_
+#define _PWM_LLD_H_
+
+#if HAL_USE_PWM || defined(__DOXYGEN__)
+
+#include "stm32_tim.h"
+
+/*===========================================================================*/
+/* Driver constants. */
+/*===========================================================================*/
+
+/**
+ * @brief Number of PWM channels per PWM driver.
+ */
+#define PWM_CHANNELS STM32_TIM_MAX_CHANNELS
+
+/**
+ * @name STM32-specific PWM complementary output mode macros
+ * @{
+ */
+/**
+ * @brief Complementary output modes mask.
+ * @note This is an STM32-specific setting.
+ */
+#define PWM_COMPLEMENTARY_OUTPUT_MASK 0xF0
+
+/**
+ * @brief Complementary output not driven.
+ * @note This is an STM32-specific setting.
+ */
+#define PWM_COMPLEMENTARY_OUTPUT_DISABLED 0x00
+
+/**
+ * @brief Complementary output, active is logic level one.
+ * @note This is an STM32-specific setting.
+ * @note This setting is only available if the configuration option
+ * @p STM32_PWM_USE_ADVANCED is set to TRUE and only for advanced
+ * timers TIM1 and TIM8.
+ */
+#define PWM_COMPLEMENTARY_OUTPUT_ACTIVE_HIGH 0x10
+
+/**
+ * @brief Complementary output, active is logic level zero.
+ * @note This is an STM32-specific setting.
+ * @note This setting is only available if the configuration option
+ * @p STM32_PWM_USE_ADVANCED is set to TRUE and only for advanced
+ * timers TIM1 and TIM8.
+ */
+#define PWM_COMPLEMENTARY_OUTPUT_ACTIVE_LOW 0x20
+/** @} */
+
+/*===========================================================================*/
+/* Driver pre-compile time settings. */
+/*===========================================================================*/
+
+/**
+ * @name Configuration options
+ * @{
+ */
+/**
+ * @brief If advanced timer features switch.
+ * @details If set to @p TRUE the advanced features for TIM1 and TIM8 are
+ * enabled.
+ * @note The default is @p TRUE.
+ */
+#if !defined(STM32_PWM_USE_ADVANCED) || defined(__DOXYGEN__)
+#define STM32_PWM_USE_ADVANCED FALSE
+#endif
+
+/**
+ * @brief PWMD1 driver enable switch.
+ * @details If set to @p TRUE the support for PWMD1 is included.
+ * @note The default is @p TRUE.
+ */
+#if !defined(STM32_PWM_USE_TIM1) || defined(__DOXYGEN__)
+#define STM32_PWM_USE_TIM1 FALSE
+#endif
+
+/**
+ * @brief PWMD2 driver enable switch.
+ * @details If set to @p TRUE the support for PWMD2 is included.
+ * @note The default is @p TRUE.
+ */
+#if !defined(STM32_PWM_USE_TIM2) || defined(__DOXYGEN__)
+#define STM32_PWM_USE_TIM2 FALSE
+#endif
+
+/**
+ * @brief PWMD3 driver enable switch.
+ * @details If set to @p TRUE the support for PWMD3 is included.
+ * @note The default is @p TRUE.
+ */
+#if !defined(STM32_PWM_USE_TIM3) || defined(__DOXYGEN__)
+#define STM32_PWM_USE_TIM3 FALSE
+#endif
+
+/**
+ * @brief PWMD4 driver enable switch.
+ * @details If set to @p TRUE the support for PWMD4 is included.
+ * @note The default is @p TRUE.
+ */
+#if !defined(STM32_PWM_USE_TIM4) || defined(__DOXYGEN__)
+#define STM32_PWM_USE_TIM4 FALSE
+#endif
+
+/**
+ * @brief PWMD5 driver enable switch.
+ * @details If set to @p TRUE the support for PWMD5 is included.
+ * @note The default is @p TRUE.
+ */
+#if !defined(STM32_PWM_USE_TIM5) || defined(__DOXYGEN__)
+#define STM32_PWM_USE_TIM5 FALSE
+#endif
+
+/**
+ * @brief PWMD8 driver enable switch.
+ * @details If set to @p TRUE the support for PWMD8 is included.
+ * @note The default is @p TRUE.
+ */
+#if !defined(STM32_PWM_USE_TIM8) || defined(__DOXYGEN__)
+#define STM32_PWM_USE_TIM8 FALSE
+#endif
+
+/**
+ * @brief PWMD9 driver enable switch.
+ * @details If set to @p TRUE the support for PWMD9 is included.
+ * @note The default is @p TRUE.
+ */
+#if !defined(STM32_PWM_USE_TIM9) || defined(__DOXYGEN__)
+#define STM32_PWM_USE_TIM9 FALSE
+#endif
+
+/**
+ * @brief PWMD1 interrupt priority level setting.
+ */
+#if !defined(STM32_PWM_TIM1_IRQ_PRIORITY) || defined(__DOXYGEN__)
+#define STM32_PWM_TIM1_IRQ_PRIORITY 7
+#endif
+
+/**
+ * @brief PWMD2 interrupt priority level setting.
+ */
+#if !defined(STM32_PWM_TIM2_IRQ_PRIORITY) || defined(__DOXYGEN__)
+#define STM32_PWM_TIM2_IRQ_PRIORITY 7
+#endif
+
+/**
+ * @brief PWMD3 interrupt priority level setting.
+ */
+#if !defined(STM32_PWM_TIM3_IRQ_PRIORITY) || defined(__DOXYGEN__)
+#define STM32_PWM_TIM3_IRQ_PRIORITY 7
+#endif
+
+/**
+ * @brief PWMD4 interrupt priority level setting.
+ */
+#if !defined(STM32_PWM_TIM4_IRQ_PRIORITY) || defined(__DOXYGEN__)
+#define STM32_PWM_TIM4_IRQ_PRIORITY 7
+#endif
+
+/**
+ * @brief PWMD5 interrupt priority level setting.
+ */
+#if !defined(STM32_PWM_TIM5_IRQ_PRIORITY) || defined(__DOXYGEN__)
+#define STM32_PWM_TIM5_IRQ_PRIORITY 7
+#endif
+
+/**
+ * @brief PWMD8 interrupt priority level setting.
+ */
+#if !defined(STM32_PWM_TIM8_IRQ_PRIORITY) || defined(__DOXYGEN__)
+#define STM32_PWM_TIM8_IRQ_PRIORITY 7
+#endif
+/** @} */
+
+/**
+ * @brief PWMD9 interrupt priority level setting.
+ */
+#if !defined(STM32_PWM_TIM9_IRQ_PRIORITY) || defined(__DOXYGEN__)
+#define STM32_PWM_TIM9_IRQ_PRIORITY 7
+#endif
+/** @} */
+
+/*===========================================================================*/
+/* Configuration checks. */
+/*===========================================================================*/
+
+#if STM32_PWM_USE_TIM1 && !STM32_HAS_TIM1
+#error "TIM1 not present in the selected device"
+#endif
+
+#if STM32_PWM_USE_TIM2 && !STM32_HAS_TIM2
+#error "TIM2 not present in the selected device"
+#endif
+
+#if STM32_PWM_USE_TIM3 && !STM32_HAS_TIM3
+#error "TIM3 not present in the selected device"
+#endif
+
+#if STM32_PWM_USE_TIM4 && !STM32_HAS_TIM4
+#error "TIM4 not present in the selected device"
+#endif
+
+#if STM32_PWM_USE_TIM5 && !STM32_HAS_TIM5
+#error "TIM5 not present in the selected device"
+#endif
+
+#if STM32_PWM_USE_TIM8 && !STM32_HAS_TIM8
+#error "TIM8 not present in the selected device"
+#endif
+
+#if STM32_PWM_USE_TIM9 && !STM32_HAS_TIM9
+#error "TIM9 not present in the selected device"
+#endif
+
+#if !STM32_PWM_USE_TIM1 && !STM32_PWM_USE_TIM2 && \
+ !STM32_PWM_USE_TIM3 && !STM32_PWM_USE_TIM4 && \
+ !STM32_PWM_USE_TIM5 && !STM32_PWM_USE_TIM8 && \
+ !STM32_PWM_USE_TIM9
+#error "PWM driver activated but no TIM peripheral assigned"
+#endif
+
+#if STM32_PWM_USE_ADVANCED && !STM32_PWM_USE_TIM1 && !STM32_PWM_USE_TIM8
+#error "advanced mode selected but no advanced timer assigned"
+#endif
+
+/* Checks on allocation of TIMx units.*/
+#if STM32_PWM_USE_TIM1
+#if defined(STM32_TIM1_IS_USED)
+#error "PWMD1 requires TIM1 but the timer is already used"
+#else
+#define STM32_TIM1_IS_USED
+#endif
+#endif
+
+#if STM32_PWM_USE_TIM2
+#if defined(STM32_TIM2_IS_USED)
+#error "PWMD2 requires TIM2 but the timer is already used"
+#else
+#define STM32_TIM2_IS_USED
+#endif
+#endif
+
+#if STM32_PWM_USE_TIM3
+#if defined(STM32_TIM3_IS_USED)
+#error "PWMD3 requires TIM3 but the timer is already used"
+#else
+#define STM32_TIM3_IS_USED
+#endif
+#endif
+
+#if STM32_PWM_USE_TIM4
+#if defined(STM32_TIM4_IS_USED)
+#error "PWMD4 requires TIM4 but the timer is already used"
+#else
+#define STM32_TIM4_IS_USED
+#endif
+#endif
+
+#if STM32_PWM_USE_TIM5
+#if defined(STM32_TIM5_IS_USED)
+#error "PWMD5 requires TIM5 but the timer is already used"
+#else
+#define STM32_TIM5_IS_USED
+#endif
+#endif
+
+#if STM32_PWM_USE_TIM8
+#if defined(STM32_TIM8_IS_USED)
+#error "PWMD8 requires TIM8 but the timer is already used"
+#else
+#define STM32_TIM8_IS_USED
+#endif
+#endif
+
+#if STM32_PWM_USE_TIM9
+#if defined(STM32_TIM9_IS_USED)
+#error "PWMD9 requires TIM9 but the timer is already used"
+#else
+#define STM32_TIM9_IS_USED
+#endif
+#endif
+
+/* IRQ priority checks.*/
+#if STM32_PWM_USE_TIM1 && !defined(STM32_TIM1_SUPPRESS_ISR) && \
+ !OSAL_IRQ_IS_VALID_PRIORITY(STM32_PWM_TIM1_IRQ_PRIORITY)
+#error "Invalid IRQ priority assigned to TIM1"
+#endif
+
+#if STM32_PWM_USE_TIM2 && !defined(STM32_TIM2_SUPPRESS_ISR) && \
+ !OSAL_IRQ_IS_VALID_PRIORITY(STM32_PWM_TIM2_IRQ_PRIORITY)
+#error "Invalid IRQ priority assigned to TIM2"
+#endif
+
+#if STM32_PWM_USE_TIM3 && !defined(STM32_TIM3_SUPPRESS_ISR) && \
+ !OSAL_IRQ_IS_VALID_PRIORITY(STM32_PWM_TIM3_IRQ_PRIORITY)
+#error "Invalid IRQ priority assigned to TIM3"
+#endif
+
+#if STM32_PWM_USE_TIM4 && !defined(STM32_TIM4_SUPPRESS_ISR) && \
+ !OSAL_IRQ_IS_VALID_PRIORITY(STM32_PWM_TIM4_IRQ_PRIORITY)
+#error "Invalid IRQ priority assigned to TIM4"
+#endif
+
+#if STM32_PWM_USE_TIM5 && !defined(STM32_TIM5_SUPPRESS_ISR) && \
+ !OSAL_IRQ_IS_VALID_PRIORITY(STM32_PWM_TIM5_IRQ_PRIORITY)
+#error "Invalid IRQ priority assigned to TIM5"
+#endif
+
+#if STM32_PWM_USE_TIM8 && !defined(STM32_TIM8_SUPPRESS_ISR) && \
+ !OSAL_IRQ_IS_VALID_PRIORITY(STM32_PWM_TIM8_IRQ_PRIORITY)
+#error "Invalid IRQ priority assigned to TIM8"
+#endif
+
+#if STM32_PWM_USE_TIM9 && !defined(STM32_TIM9_SUPPRESS_ISR) && \
+ !OSAL_IRQ_IS_VALID_PRIORITY(STM32_PWM_TIM9_IRQ_PRIORITY)
+#error "Invalid IRQ priority assigned to TIM9"
+#endif
+
+/*===========================================================================*/
+/* Driver data structures and types. */
+/*===========================================================================*/
+
+/**
+ * @brief Type of a PWM mode.
+ */
+typedef uint32_t pwmmode_t;
+
+/**
+ * @brief Type of a PWM channel.
+ */
+typedef uint8_t pwmchannel_t;
+
+/**
+ * @brief Type of a channels mask.
+ */
+typedef uint32_t pwmchnmsk_t;
+
+/**
+ * @brief Type of a PWM counter.
+ */
+typedef uint32_t pwmcnt_t;
+
+/**
+ * @brief Type of a PWM driver channel configuration structure.
+ */
+typedef struct {
+ /**
+ * @brief Channel active logic level.
+ */
+ pwmmode_t mode;
+ /**
+ * @brief Channel callback pointer.
+ * @note This callback is invoked on the channel compare event. If set to
+ * @p NULL then the callback is disabled.
+ */
+ pwmcallback_t callback;
+ /* End of the mandatory fields.*/
+} PWMChannelConfig;
+
+/**
+ * @brief Type of a PWM driver configuration structure.
+ */
+typedef struct {
+ /**
+ * @brief Timer clock in Hz.
+ * @note The low level can use assertions in order to catch invalid
+ * frequency specifications.
+ */
+ uint32_t frequency;
+ /**
+ * @brief PWM period in ticks.
+ * @note The low level can use assertions in order to catch invalid
+ * period specifications.
+ */
+ pwmcnt_t period;
+ /**
+ * @brief Periodic callback pointer.
+ * @note This callback is invoked on PWM counter reset. If set to
+ * @p NULL then the callback is disabled.
+ */
+ pwmcallback_t callback;
+ /**
+ * @brief Channels configurations.
+ */
+ PWMChannelConfig channels[PWM_CHANNELS];
+ /* End of the mandatory fields.*/
+ /**
+ * @brief TIM CR2 register initialization data.
+ * @note The value of this field should normally be equal to zero.
+ */
+ uint32_t cr2;
+#if STM32_PWM_USE_ADVANCED || defined(__DOXYGEN__)
+ /**
+ * @brief TIM BDTR (break & dead-time) register initialization data.
+ * @note The value of this field should normally be equal to zero.
+ */ \
+ uint32_t bdtr;
+#endif
+ /**
+ * @brief TIM DIER register initialization data.
+ * @note The value of this field should normally be equal to zero.
+ * @note Only the DMA-related bits can be specified in this field.
+ */
+ uint32_t dier;
+} PWMConfig;
+
+/**
+ * @brief Structure representing a PWM driver.
+ */
+struct PWMDriver {
+ /**
+ * @brief Driver state.
+ */
+ pwmstate_t state;
+ /**
+ * @brief Current driver configuration data.
+ */
+ const PWMConfig *config;
+ /**
+ * @brief Current PWM period in ticks.
+ */
+ pwmcnt_t period;
+ /**
+ * @brief Mask of the enabled channels.
+ */
+ pwmchnmsk_t enabled;
+ /**
+ * @brief Number of channels in this instance.
+ */
+ pwmchannel_t channels;
+#if defined(PWM_DRIVER_EXT_FIELDS)
+ PWM_DRIVER_EXT_FIELDS
+#endif
+ /* End of the mandatory fields.*/
+ /**
+ * @brief Timer base clock.
+ */
+ uint32_t clock;
+ /**
+ * @brief Pointer to the TIMx registers block.
+ */
+ stm32_tim_t *tim;
+};
+
+/*===========================================================================*/
+/* Driver macros. */
+/*===========================================================================*/
+
+/**
+ * @brief Changes the period the PWM peripheral.
+ * @details This function changes the period of a PWM unit that has already
+ * been activated using @p pwmStart().
+ * @pre The PWM unit must have been activated using @p pwmStart().
+ * @post The PWM unit period is changed to the new value.
+ * @note The function has effect at the next cycle start.
+ * @note If a period is specified that is shorter than the pulse width
+ * programmed in one of the channels then the behavior is not
+ * guaranteed.
+ *
+ * @param[in] pwmp pointer to a @p PWMDriver object
+ * @param[in] period new cycle time in ticks
+ *
+ * @notapi
+ */
+#define pwm_lld_change_period(pwmp, period) \
+ ((pwmp)->tim->ARR = ((period) - 1))
+
+/*===========================================================================*/
+/* External declarations. */
+/*===========================================================================*/
+
+#if STM32_PWM_USE_TIM1 && !defined(__DOXYGEN__)
+extern PWMDriver PWMD1;
+#endif
+
+#if STM32_PWM_USE_TIM2 && !defined(__DOXYGEN__)
+extern PWMDriver PWMD2;
+#endif
+
+#if STM32_PWM_USE_TIM3 && !defined(__DOXYGEN__)
+extern PWMDriver PWMD3;
+#endif
+
+#if STM32_PWM_USE_TIM4 && !defined(__DOXYGEN__)
+extern PWMDriver PWMD4;
+#endif
+
+#if STM32_PWM_USE_TIM5 && !defined(__DOXYGEN__)
+extern PWMDriver PWMD5;
+#endif
+
+#if STM32_PWM_USE_TIM8 && !defined(__DOXYGEN__)
+extern PWMDriver PWMD8;
+#endif
+
+#if STM32_PWM_USE_TIM9 && !defined(__DOXYGEN__)
+extern PWMDriver PWMD9;
+#endif
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+ void pwm_lld_init(void);
+ void pwm_lld_start(PWMDriver *pwmp);
+ void pwm_lld_stop(PWMDriver *pwmp);
+ void pwm_lld_enable_channel(PWMDriver *pwmp,
+ pwmchannel_t channel,
+ pwmcnt_t width);
+ void pwm_lld_disable_channel(PWMDriver *pwmp, pwmchannel_t channel);
+ void pwm_lld_enable_periodic_notification(PWMDriver *pwmp);
+ void pwm_lld_disable_periodic_notification(PWMDriver *pwmp);
+ void pwm_lld_enable_channel_notification(PWMDriver *pwmp,
+ pwmchannel_t channel);
+ void pwm_lld_disable_channel_notification(PWMDriver *pwmp,
+ pwmchannel_t channel);
+ void pwm_lld_serve_interrupt(PWMDriver *pwmp);
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* HAL_USE_PWM */
+
+#endif /* _PWM_LLD_H_ */
+
+/** @} */
|