diff options
Diffstat (limited to 'os/hal/ports/STM32/LLD/SPIv3')
| -rw-r--r-- | os/hal/ports/STM32/LLD/SPIv3/driver.mk | 13 | ||||
| -rw-r--r-- | os/hal/ports/STM32/LLD/SPIv3/hal_i2s_lld.c | 577 | ||||
| -rw-r--r-- | os/hal/ports/STM32/LLD/SPIv3/hal_i2s_lld.h | 432 | ||||
| -rw-r--r-- | os/hal/ports/STM32/LLD/SPIv3/hal_spi_lld.c | 670 | ||||
| -rw-r--r-- | os/hal/ports/STM32/LLD/SPIv3/hal_spi_lld.h | 567 |
5 files changed, 2259 insertions, 0 deletions
diff --git a/os/hal/ports/STM32/LLD/SPIv3/driver.mk b/os/hal/ports/STM32/LLD/SPIv3/driver.mk new file mode 100644 index 000000000..f8779c133 --- /dev/null +++ b/os/hal/ports/STM32/LLD/SPIv3/driver.mk @@ -0,0 +1,13 @@ +ifeq ($(USE_SMART_BUILD),yes)
+ifneq ($(findstring HAL_USE_I2S TRUE,$(HALCONF)),)
+PLATFORMSRC += $(CHIBIOS)/os/hal/ports/STM32/LLD/SPIv3/hal_i2s_lld.c
+endif
+ifneq ($(findstring HAL_USE_SPI TRUE,$(HALCONF)),)
+PLATFORMSRC += $(CHIBIOS)/os/hal/ports/STM32/LLD/SPIv3/hal_spi_lld.c
+endif
+else
+PLATFORMSRC += $(CHIBIOS)/os/hal/ports/STM32/LLD/SPIv3/hal_i2s_lld.c
+PLATFORMSRC += $(CHIBIOS)/os/hal/ports/STM32/LLD/SPIv3/hal_spi_lld.c
+endif
+
+PLATFORMINC += $(CHIBIOS)/os/hal/ports/STM32/LLD/SPIv3
diff --git a/os/hal/ports/STM32/LLD/SPIv3/hal_i2s_lld.c b/os/hal/ports/STM32/LLD/SPIv3/hal_i2s_lld.c new file mode 100644 index 000000000..33fe22ca5 --- /dev/null +++ b/os/hal/ports/STM32/LLD/SPIv3/hal_i2s_lld.c @@ -0,0 +1,577 @@ +/*
+ ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+/**
+ * @file SPIv2/hal_i2s_lld.c
+ * @brief STM32 I2S subsystem low level driver source.
+ *
+ * @addtogroup I2S
+ * @{
+ */
+
+#include "hal.h"
+
+#if HAL_USE_I2S || defined(__DOXYGEN__)
+
+/*===========================================================================*/
+/* Driver local definitions. */
+/*===========================================================================*/
+
+#define I2S1_RX_DMA_CHANNEL \
+ STM32_DMA_GETCHANNEL(STM32_I2S_SPI1_RX_DMA_STREAM, \
+ STM32_SPI1_RX_DMA_CHN)
+
+#define I2S1_TX_DMA_CHANNEL \
+ STM32_DMA_GETCHANNEL(STM32_I2S_SPI1_TX_DMA_STREAM, \
+ STM32_SPI1_TX_DMA_CHN)
+
+#define I2S2_RX_DMA_CHANNEL \
+ STM32_DMA_GETCHANNEL(STM32_I2S_SPI2_RX_DMA_STREAM, \
+ STM32_SPI2_RX_DMA_CHN)
+
+#define I2S2_TX_DMA_CHANNEL \
+ STM32_DMA_GETCHANNEL(STM32_I2S_SPI2_TX_DMA_STREAM, \
+ STM32_SPI2_TX_DMA_CHN)
+
+#define I2S3_RX_DMA_CHANNEL \
+ STM32_DMA_GETCHANNEL(STM32_I2S_SPI3_RX_DMA_STREAM, \
+ STM32_SPI3_RX_DMA_CHN)
+
+#define I2S3_TX_DMA_CHANNEL \
+ STM32_DMA_GETCHANNEL(STM32_I2S_SPI3_TX_DMA_STREAM, \
+ STM32_SPI3_TX_DMA_CHN)
+
+/*
+ * Static I2S settings for I2S1.
+ */
+#if !STM32_I2S_IS_MASTER(STM32_I2S_SPI1_MODE)
+#if STM32_I2S_TX_ENABLED(STM32_I2S_SPI1_MODE)
+#define STM32_I2S1_CFGR_CFG 0
+#endif
+#if STM32_I2S_RX_ENABLED(STM32_I2S_SPI1_MODE)
+#define STM32_I2S1_CFGR_CFG SPI_I2SCFGR_I2SCFG_0
+#endif
+#else /* !STM32_I2S_IS_MASTER(STM32_I2S_SPI1_MODE) */
+#if STM32_I2S_TX_ENABLED(STM32_I2S_SPI1_MODE)
+#define STM32_I2S1_CFGR_CFG SPI_I2SCFGR_I2SCFG_1
+#endif
+#if STM32_I2S_RX_ENABLED(STM32_I2S_SPI1_MODE)
+#define STM32_I2S1_CFGR_CFG (SPI_I2SCFGR_I2SCFG_1 | \
+ SPI_I2SCFGR_I2SCFG_0)
+#endif
+#endif /* !STM32_I2S_IS_MASTER(STM32_I2S_SPI1_MODE) */
+
+/*
+ * Static I2S settings for I2S2.
+ */
+#if !STM32_I2S_IS_MASTER(STM32_I2S_SPI2_MODE)
+#if STM32_I2S_TX_ENABLED(STM32_I2S_SPI2_MODE)
+#define STM32_I2S2_CFGR_CFG 0
+#endif
+#if STM32_I2S_RX_ENABLED(STM32_I2S_SPI2_MODE)
+#define STM32_I2S2_CFGR_CFG SPI_I2SCFGR_I2SCFG_0
+#endif
+#else /* !STM32_I2S_IS_MASTER(STM32_I2S_SPI2_MODE) */
+#if STM32_I2S_TX_ENABLED(STM32_I2S_SPI2_MODE)
+#define STM32_I2S2_CFGR_CFG SPI_I2SCFGR_I2SCFG_1
+#endif
+#if STM32_I2S_RX_ENABLED(STM32_I2S_SPI2_MODE)
+#define STM32_I2S2_CFGR_CFG (SPI_I2SCFGR_I2SCFG_1 | \
+ SPI_I2SCFGR_I2SCFG_0)
+#endif
+#endif /* !STM32_I2S_IS_MASTER(STM32_I2S_SPI2_MODE) */
+
+/*
+ * Static I2S settings for I2S3.
+ */
+#if !STM32_I2S_IS_MASTER(STM32_I2S_SPI3_MODE)
+#if STM32_I2S_TX_ENABLED(STM32_I2S_SPI3_MODE)
+#define STM32_I2S3_CFGR_CFG 0
+#endif
+#if STM32_I2S_RX_ENABLED(STM32_I2S_SPI3_MODE)
+#define STM32_I2S3_CFGR_CFG SPI_I2SCFGR_I2SCFG_0
+#endif
+#else /* !STM32_I2S_IS_MASTER(STM32_I2S_SPI3_MODE) */
+#if STM32_I2S_TX_ENABLED(STM32_I2S_SPI3_MODE)
+#define STM32_I2S3_CFGR_CFG SPI_I2SCFGR_I2SCFG_1
+#endif
+#if STM32_I2S_RX_ENABLED(STM32_I2S_SPI3_MODE)
+#define STM32_I2S3_CFGR_CFG (SPI_I2SCFGR_I2SCFG_1 | \
+ SPI_I2SCFGR_I2SCFG_0)
+#endif
+#endif /* !STM32_I2S_IS_MASTER(STM32_I2S_SPI3_MODE) */
+
+/*===========================================================================*/
+/* Driver exported variables. */
+/*===========================================================================*/
+
+/** @brief I2S1 driver identifier.*/
+#if STM32_I2S_USE_SPI1 || defined(__DOXYGEN__)
+I2SDriver I2SD1;
+#endif
+
+/** @brief I2S2 driver identifier.*/
+#if STM32_I2S_USE_SPI2 || defined(__DOXYGEN__)
+I2SDriver I2SD2;
+#endif
+
+/** @brief I2S3 driver identifier.*/
+#if STM32_I2S_USE_SPI3 || defined(__DOXYGEN__)
+I2SDriver I2SD3;
+#endif
+
+/*===========================================================================*/
+/* Driver local variables and types. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver local functions. */
+/*===========================================================================*/
+
+#if STM32_I2S_RX_ENABLED(STM32_I2S_SPI1_MODE) || \
+ STM32_I2S_RX_ENABLED(STM32_I2S_SPI2_MODE) || \
+ STM32_I2S_RX_ENABLED(STM32_I2S_SPI3_MODE) || defined(__DOXYGEN__)
+/**
+ * @brief Shared end-of-rx service routine.
+ *
+ * @param[in] i2sp pointer to the @p I2SDriver object
+ * @param[in] flags pre-shifted content of the ISR register
+ */
+static void i2s_lld_serve_rx_interrupt(I2SDriver *i2sp, uint32_t flags) {
+
+ (void)i2sp;
+
+ /* DMA errors handling.*/
+#if defined(STM32_I2S_DMA_ERROR_HOOK)
+ if ((flags & (STM32_DMA_ISR_TEIF | STM32_DMA_ISR_DMEIF)) != 0) {
+ STM32_I2S_DMA_ERROR_HOOK(i2sp);
+ }
+#endif
+
+ /* Callbacks handling, note it is portable code defined in the high
+ level driver.*/
+ if ((flags & STM32_DMA_ISR_TCIF) != 0) {
+ /* Transfer complete processing.*/
+ _i2s_isr_full_code(i2sp);
+ }
+ else if ((flags & STM32_DMA_ISR_HTIF) != 0) {
+ /* Half transfer processing.*/
+ _i2s_isr_half_code(i2sp);
+ }
+}
+#endif
+
+#if STM32_I2S_TX_ENABLED(STM32_I2S_SPI1_MODE) || \
+ STM32_I2S_TX_ENABLED(STM32_I2S_SPI2_MODE) || \
+ STM32_I2S_TX_ENABLED(STM32_I2S_SPI3_MODE) || defined(__DOXYGEN__)
+/**
+ * @brief Shared end-of-tx service routine.
+ *
+ * @param[in] i2sp pointer to the @p I2SDriver object
+ * @param[in] flags pre-shifted content of the ISR register
+ */
+static void i2s_lld_serve_tx_interrupt(I2SDriver *i2sp, uint32_t flags) {
+
+ (void)i2sp;
+
+ /* DMA errors handling.*/
+#if defined(STM32_I2S_DMA_ERROR_HOOK)
+ if ((flags & (STM32_DMA_ISR_TEIF | STM32_DMA_ISR_DMEIF)) != 0) {
+ STM32_I2S_DMA_ERROR_HOOK(i2sp);
+ }
+#endif
+
+ /* Callbacks handling, note it is portable code defined in the high
+ level driver.*/
+ if ((flags & STM32_DMA_ISR_TCIF) != 0) {
+ /* Transfer complete processing.*/
+ _i2s_isr_full_code(i2sp);
+ }
+ else if ((flags & STM32_DMA_ISR_HTIF) != 0) {
+ /* Half transfer processing.*/
+ _i2s_isr_half_code(i2sp);
+ }
+}
+#endif
+
+/*===========================================================================*/
+/* Driver interrupt handlers. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver exported functions. */
+/*===========================================================================*/
+
+/**
+ * @brief Low level I2S driver initialization.
+ *
+ * @notapi
+ */
+void i2s_lld_init(void) {
+
+#if STM32_I2S_USE_SPI1
+ i2sObjectInit(&I2SD1);
+ I2SD1.spi = SPI1;
+ I2SD1.cfg = STM32_I2S1_CFGR_CFG;
+#if STM32_I2S_RX_ENABLED(STM32_I2S_SPI1_MODE)
+ I2SD1.dmarx = STM32_DMA_STREAM(STM32_I2S_SPI1_RX_DMA_STREAM);
+ I2SD1.rxdmamode = STM32_DMA_CR_CHSEL(I2S1_RX_DMA_CHANNEL) |
+ STM32_DMA_CR_PL(STM32_I2S_SPI1_DMA_PRIORITY) |
+ STM32_DMA_CR_PSIZE_HWORD |
+ STM32_DMA_CR_MSIZE_HWORD |
+ STM32_DMA_CR_DIR_P2M |
+ STM32_DMA_CR_MINC |
+ STM32_DMA_CR_CIRC |
+ STM32_DMA_CR_HTIE |
+ STM32_DMA_CR_TCIE |
+ STM32_DMA_CR_DMEIE |
+ STM32_DMA_CR_TEIE;
+#else
+ I2SD1.dmarx = NULL;
+ I2SD1.rxdmamode = 0;
+#endif
+#if STM32_I2S_TX_ENABLED(STM32_I2S_SPI1_MODE)
+ I2SD1.dmatx = STM32_DMA_STREAM(STM32_I2S_SPI1_TX_DMA_STREAM);
+ I2SD1.txdmamode = STM32_DMA_CR_CHSEL(I2S1_TX_DMA_CHANNEL) |
+ STM32_DMA_CR_PL(STM32_I2S_SPI1_DMA_PRIORITY) |
+ STM32_DMA_CR_PSIZE_HWORD |
+ STM32_DMA_CR_MSIZE_HWORD |
+ STM32_DMA_CR_DIR_M2P |
+ STM32_DMA_CR_MINC |
+ STM32_DMA_CR_CIRC |
+ STM32_DMA_CR_HTIE |
+ STM32_DMA_CR_TCIE |
+ STM32_DMA_CR_DMEIE |
+ STM32_DMA_CR_TEIE;
+#else
+ I2SD1.dmatx = NULL;
+ I2SD1.txdmamode = 0;
+#endif
+#endif
+
+#if STM32_I2S_USE_SPI2
+ i2sObjectInit(&I2SD2);
+ I2SD2.spi = SPI2;
+ I2SD2.cfg = STM32_I2S2_CFGR_CFG;
+#if STM32_I2S_RX_ENABLED(STM32_I2S_SPI2_MODE)
+ I2SD2.dmarx = STM32_DMA_STREAM(STM32_I2S_SPI2_RX_DMA_STREAM);
+ I2SD2.rxdmamode = STM32_DMA_CR_CHSEL(I2S2_RX_DMA_CHANNEL) |
+ STM32_DMA_CR_PL(STM32_I2S_SPI2_DMA_PRIORITY) |
+ STM32_DMA_CR_PSIZE_HWORD |
+ STM32_DMA_CR_MSIZE_HWORD |
+ STM32_DMA_CR_DIR_P2M |
+ STM32_DMA_CR_MINC |
+ STM32_DMA_CR_CIRC |
+ STM32_DMA_CR_HTIE |
+ STM32_DMA_CR_TCIE |
+ STM32_DMA_CR_DMEIE |
+ STM32_DMA_CR_TEIE;
+#else
+ I2SD2.dmarx = NULL;
+ I2SD2.rxdmamode = 0;
+#endif
+#if STM32_I2S_TX_ENABLED(STM32_I2S_SPI2_MODE)
+ I2SD2.dmatx = STM32_DMA_STREAM(STM32_I2S_SPI2_TX_DMA_STREAM);
+ I2SD2.txdmamode = STM32_DMA_CR_CHSEL(I2S2_TX_DMA_CHANNEL) |
+ STM32_DMA_CR_PL(STM32_I2S_SPI2_DMA_PRIORITY) |
+ STM32_DMA_CR_PSIZE_HWORD |
+ STM32_DMA_CR_MSIZE_HWORD |
+ STM32_DMA_CR_DIR_M2P |
+ STM32_DMA_CR_MINC |
+ STM32_DMA_CR_CIRC |
+ STM32_DMA_CR_HTIE |
+ STM32_DMA_CR_TCIE |
+ STM32_DMA_CR_DMEIE |
+ STM32_DMA_CR_TEIE;
+#else
+ I2SD2.dmatx = NULL;
+ I2SD2.txdmamode = 0;
+#endif
+#endif
+
+#if STM32_I2S_USE_SPI3
+ i2sObjectInit(&I2SD3);
+ I2SD3.spi = SPI3;
+ I2SD3.cfg = STM32_I2S3_CFGR_CFG;
+#if STM32_I2S_RX_ENABLED(STM32_I2S_SPI3_MODE)
+ I2SD3.dmarx = STM32_DMA_STREAM(STM32_I2S_SPI3_RX_DMA_STREAM);
+ I2SD3.rxdmamode = STM32_DMA_CR_CHSEL(I2S3_RX_DMA_CHANNEL) |
+ STM32_DMA_CR_PL(STM32_I2S_SPI3_DMA_PRIORITY) |
+ STM32_DMA_CR_PSIZE_HWORD |
+ STM32_DMA_CR_MSIZE_HWORD |
+ STM32_DMA_CR_DIR_P2M |
+ STM32_DMA_CR_MINC |
+ STM32_DMA_CR_CIRC |
+ STM32_DMA_CR_HTIE |
+ STM32_DMA_CR_TCIE |
+ STM32_DMA_CR_DMEIE |
+ STM32_DMA_CR_TEIE;
+#else
+ I2SD3.dmarx = NULL;
+ I2SD3.rxdmamode = 0;
+#endif
+#if STM32_I2S_TX_ENABLED(STM32_I2S_SPI3_MODE)
+ I2SD3.dmatx = STM32_DMA_STREAM(STM32_I2S_SPI3_TX_DMA_STREAM);
+ I2SD3.txdmamode = STM32_DMA_CR_CHSEL(I2S3_TX_DMA_CHANNEL) |
+ STM32_DMA_CR_PL(STM32_I2S_SPI3_DMA_PRIORITY) |
+ STM32_DMA_CR_PSIZE_HWORD |
+ STM32_DMA_CR_MSIZE_HWORD |
+ STM32_DMA_CR_DIR_M2P |
+ STM32_DMA_CR_MINC |
+ STM32_DMA_CR_CIRC |
+ STM32_DMA_CR_HTIE |
+ STM32_DMA_CR_TCIE |
+ STM32_DMA_CR_DMEIE |
+ STM32_DMA_CR_TEIE;
+#else
+ I2SD3.dmatx = NULL;
+ I2SD3.txdmamode = 0;
+#endif
+#endif
+}
+
+/**
+ * @brief Configures and activates the I2S peripheral.
+ *
+ * @param[in] i2sp pointer to the @p I2SDriver object
+ *
+ * @notapi
+ */
+void i2s_lld_start(I2SDriver *i2sp) {
+
+ /* If in stopped state then enables the SPI and DMA clocks.*/
+ if (i2sp->state == I2S_STOP) {
+
+#if STM32_I2S_USE_SPI1
+ if (&I2SD1 == i2sp) {
+ bool b;
+
+ /* Enabling I2S unit clock.*/
+ rccEnableSPI1(FALSE);
+
+#if STM32_I2S_RX_ENABLED(STM32_I2S_SPI1_MODE)
+ b = dmaStreamAllocate(i2sp->dmarx,
+ STM32_I2S_SPI1_IRQ_PRIORITY,
+ (stm32_dmaisr_t)i2s_lld_serve_rx_interrupt,
+ (void *)i2sp);
+ osalDbgAssert(!b, "stream already allocated");
+
+ /* CRs settings are done here because those never changes until
+ the driver is stopped.*/
+ i2sp->spi->CR1 = 0;
+ i2sp->spi->CR2 = SPI_CR2_RXDMAEN;
+#endif
+#if STM32_I2S_TX_ENABLED(STM32_I2S_SPI1_MODE)
+ b = dmaStreamAllocate(i2sp->dmatx,
+ STM32_I2S_SPI1_IRQ_PRIORITY,
+ (stm32_dmaisr_t)i2s_lld_serve_tx_interrupt,
+ (void *)i2sp);
+ osalDbgAssert(!b, "stream already allocated");
+
+ /* CRs settings are done here because those never changes until
+ the driver is stopped.*/
+ i2sp->spi->CR1 = 0;
+ i2sp->spi->CR2 = SPI_CR2_TXDMAEN;
+#endif
+ }
+#endif
+
+#if STM32_I2S_USE_SPI2
+ if (&I2SD2 == i2sp) {
+ bool b;
+
+ /* Enabling I2S unit clock.*/
+ rccEnableSPI2(FALSE);
+
+#if STM32_I2S_RX_ENABLED(STM32_I2S_SPI2_MODE)
+ b = dmaStreamAllocate(i2sp->dmarx,
+ STM32_I2S_SPI2_IRQ_PRIORITY,
+ (stm32_dmaisr_t)i2s_lld_serve_rx_interrupt,
+ (void *)i2sp);
+ osalDbgAssert(!b, "stream already allocated");
+
+ /* CRs settings are done here because those never changes until
+ the driver is stopped.*/
+ i2sp->spi->CR1 = 0;
+ i2sp->spi->CR2 = SPI_CR2_RXDMAEN;
+#endif
+#if STM32_I2S_TX_ENABLED(STM32_I2S_SPI2_MODE)
+ b = dmaStreamAllocate(i2sp->dmatx,
+ STM32_I2S_SPI2_IRQ_PRIORITY,
+ (stm32_dmaisr_t)i2s_lld_serve_tx_interrupt,
+ (void *)i2sp);
+ osalDbgAssert(!b, "stream already allocated");
+
+ /* CRs settings are done here because those never changes until
+ the driver is stopped.*/
+ i2sp->spi->CR1 = 0;
+ i2sp->spi->CR2 = SPI_CR2_TXDMAEN;
+#endif
+ }
+#endif
+
+#if STM32_I2S_USE_SPI3
+ if (&I2SD3 == i2sp) {
+ bool b;
+
+ /* Enabling I2S unit clock.*/
+ rccEnableSPI3(FALSE);
+
+#if STM32_I2S_RX_ENABLED(STM32_I2S_SPI3_MODE)
+ b = dmaStreamAllocate(i2sp->dmarx,
+ STM32_I2S_SPI3_IRQ_PRIORITY,
+ (stm32_dmaisr_t)i2s_lld_serve_rx_interrupt,
+ (void *)i2sp);
+ osalDbgAssert(!b, "stream already allocated");
+
+ /* CRs settings are done here because those never changes until
+ the driver is stopped.*/
+ i2sp->spi->CR1 = 0;
+ i2sp->spi->CR2 = SPI_CR2_RXDMAEN;
+#endif
+#if STM32_I2S_TX_ENABLED(STM32_I2S_SPI3_MODE)
+ b = dmaStreamAllocate(i2sp->dmatx,
+ STM32_I2S_SPI3_IRQ_PRIORITY,
+ (stm32_dmaisr_t)i2s_lld_serve_tx_interrupt,
+ (void *)i2sp);
+ osalDbgAssert(!b, "stream already allocated");
+
+ /* CRs settings are done here because those never changes until
+ the driver is stopped.*/
+ i2sp->spi->CR1 = 0;
+ i2sp->spi->CR2 = SPI_CR2_TXDMAEN;
+#endif
+ }
+#endif
+ }
+
+ /* I2S (re)configuration.*/
+ i2sp->spi->I2SPR = i2sp->config->i2spr;
+ i2sp->spi->I2SCFGR = i2sp->config->i2scfgr | i2sp->cfg | SPI_I2SCFGR_I2SMOD;
+}
+
+/**
+ * @brief Deactivates the I2S peripheral.
+ *
+ * @param[in] i2sp pointer to the @p I2SDriver object
+ *
+ * @notapi
+ */
+void i2s_lld_stop(I2SDriver *i2sp) {
+
+ /* If in ready state then disables the SPI clock.*/
+ if (i2sp->state == I2S_READY) {
+
+ /* SPI disable.*/
+ i2sp->spi->CR2 = 0;
+ if (NULL != i2sp->dmarx)
+ dmaStreamRelease(i2sp->dmarx);
+ if (NULL != i2sp->dmatx)
+ dmaStreamRelease(i2sp->dmatx);
+
+#if STM32_I2S_USE_SPI1
+ if (&I2SD1 == i2sp)
+ rccDisableSPI1(FALSE);
+#endif
+
+#if STM32_I2S_USE_SPI2
+ if (&I2SD2 == i2sp)
+ rccDisableSPI2(FALSE);
+#endif
+
+#if STM32_I2S_USE_SPI3
+ if (&I2SD3 == i2sp)
+ rccDisableSPI3(FALSE);
+#endif
+ }
+}
+
+/**
+ * @brief Starts a I2S data exchange.
+ *
+ * @param[in] i2sp pointer to the @p I2SDriver object
+ *
+ * @notapi
+ */
+void i2s_lld_start_exchange(I2SDriver *i2sp) {
+ size_t size = i2sp->config->size;
+
+ /* In 32 bit modes the DMA has to perform double operations because fetches
+ are always performed using 16 bit accesses.
+ DATLEN CHLEN SIZE
+ 00 (16) 0 (16) 16
+ 00 (16) 1 (32) 16
+ 01 (24) X 32
+ 10 (32) X 32
+ 11 (NA) X NA
+ */
+ if ((i2sp->config->i2scfgr & SPI_I2SCFGR_DATLEN) != 0)
+ size *= 2;
+
+ /* RX DMA setup.*/
+ if (NULL != i2sp->dmarx) {
+ dmaStreamSetMode(i2sp->dmarx, i2sp->rxdmamode);
+ dmaStreamSetPeripheral(i2sp->dmarx, &i2sp->spi->DR);
+ dmaStreamSetMemory0(i2sp->dmarx, i2sp->config->rx_buffer);
+ dmaStreamSetTransactionSize(i2sp->dmarx, size);
+ dmaStreamEnable(i2sp->dmarx);
+ }
+
+ /* TX DMA setup.*/
+ if (NULL != i2sp->dmatx) {
+ dmaStreamSetMode(i2sp->dmatx, i2sp->txdmamode);
+ dmaStreamSetPeripheral(i2sp->dmatx, &i2sp->spi->DR);
+ dmaStreamSetMemory0(i2sp->dmatx, i2sp->config->tx_buffer);
+ dmaStreamSetTransactionSize(i2sp->dmatx, size);
+ dmaStreamEnable(i2sp->dmatx);
+ }
+
+ /* Starting transfer.*/
+ i2sp->spi->I2SCFGR |= SPI_I2SCFGR_I2SE;
+}
+
+/**
+ * @brief Stops the ongoing data exchange.
+ * @details The ongoing data exchange, if any, is stopped, if the driver
+ * was not active the function does nothing.
+ *
+ * @param[in] i2sp pointer to the @p I2SDriver object
+ *
+ * @notapi
+ */
+void i2s_lld_stop_exchange(I2SDriver *i2sp) {
+
+ /* Stop TX DMA, if enabled.*/
+ if (NULL != i2sp->dmatx) {
+ dmaStreamDisable(i2sp->dmatx);
+
+ /* From the RM: To switch off the I2S, by clearing I2SE, it is mandatory
+ to wait for TXE = 1 and BSY = 0.*/
+ while ((i2sp->spi->SR & (SPI_SR_TXE | SPI_SR_BSY)) != SPI_SR_TXE)
+ ;
+ }
+
+ /* Stop SPI/I2S peripheral.*/
+ i2sp->spi->I2SCFGR &= ~SPI_I2SCFGR_I2SE;
+
+ /* Stop RX DMA, if enabled.*/
+ if (NULL != i2sp->dmarx)
+ dmaStreamDisable(i2sp->dmarx);
+}
+
+#endif /* HAL_USE_I2S */
+
+/** @} */
diff --git a/os/hal/ports/STM32/LLD/SPIv3/hal_i2s_lld.h b/os/hal/ports/STM32/LLD/SPIv3/hal_i2s_lld.h new file mode 100644 index 000000000..cd23c8470 --- /dev/null +++ b/os/hal/ports/STM32/LLD/SPIv3/hal_i2s_lld.h @@ -0,0 +1,432 @@ +/*
+ ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+/**
+ * @file SPIv2/hal_i2s_lld.h
+ * @brief STM32 I2S subsystem low level driver header.
+ *
+ * @addtogroup I2S
+ * @{
+ */
+
+#ifndef HAL_I2S_LLD_H
+#define HAL_I2S_LLD_H
+
+#if HAL_USE_I2S || defined(__DOXYGEN__)
+
+/*===========================================================================*/
+/* Driver constants. */
+/*===========================================================================*/
+
+/**
+ * @name Static I2S modes
+ * @{
+ */
+#define STM32_I2S_MODE_SLAVE 0
+#define STM32_I2S_MODE_MASTER 1
+#define STM32_I2S_MODE_RX 2
+#define STM32_I2S_MODE_TX 4
+#define STM32_I2S_MODE_RXTX (STM32_I2S_MODE_RX | \
+ STM32_I2S_MODE_TX)
+/** @} */
+
+/**
+ * @name Mode checks
+ * @{
+ */
+#define STM32_I2S_IS_MASTER(mode) ((mode) & STM32_I2S_MODE_MASTER)
+#define STM32_I2S_RX_ENABLED(mode) ((mode) & STM32_I2S_MODE_RX)
+#define STM32_I2S_TX_ENABLED(mode) ((mode) & STM32_I2S_MODE_TX)
+/** @} */
+
+/*===========================================================================*/
+/* Driver pre-compile time settings. */
+/*===========================================================================*/
+
+/**
+ * @name Configuration options
+ * @{
+ */
+/**
+ * @brief I2S1 driver enable switch.
+ * @details If set to @p TRUE the support for I2S1 is included.
+ * @note The default is @p TRUE.
+ */
+#if !defined(STM32_I2S_USE_SPI1) || defined(__DOXYGEN__)
+#define STM32_I2S_USE_SPI1 FALSE
+#endif
+
+/**
+ * @brief I2S2 driver enable switch.
+ * @details If set to @p TRUE the support for I2S2 is included.
+ * @note The default is @p TRUE.
+ */
+#if !defined(STM32_I2S_USE_SPI2) || defined(__DOXYGEN__)
+#define STM32_I2S_USE_SPI2 FALSE
+#endif
+
+/**
+ * @brief I2S3 driver enable switch.
+ * @details If set to @p TRUE the support for I2S3 is included.
+ * @note The default is @p TRUE.
+ */
+#if !defined(STM32_I2S_USE_SPI3) || defined(__DOXYGEN__)
+#define STM32_I2S_USE_SPI3 FALSE
+#endif
+
+/**
+ * @brief I2S1 mode.
+ */
+#if !defined(STM32_I2S_SPI1_MODE) || defined(__DOXYGEN__)
+#define STM32_I2S_SPI1_MODE (STM32_I2S_MODE_MASTER | \
+ STM32_I2S_MODE_RX)
+#endif
+
+/**
+ * @brief I2S2 mode.
+ */
+#if !defined(STM32_I2S_SPI2_MODE) || defined(__DOXYGEN__)
+#define STM32_I2S_SPI2_MODE (STM32_I2S_MODE_MASTER | \
+ STM32_I2S_MODE_RX)
+#endif
+
+/**
+ * @brief I2S3 mode.
+ */
+#if !defined(STM32_I2S_SPI3_MODE) || defined(__DOXYGEN__)
+#define STM32_I2S_SPI3_MODE (STM32_I2S_MODE_MASTER | \
+ STM32_I2S_MODE_RX)
+#endif
+
+/**
+ * @brief I2S1 interrupt priority level setting.
+ */
+#if !defined(STM32_I2S_SPI1_IRQ_PRIORITY) || defined(__DOXYGEN__)
+#define STM32_I2S_SPI1_IRQ_PRIORITY 10
+#endif
+
+/**
+ * @brief I2S2 interrupt priority level setting.
+ */
+#if !defined(STM32_I2S_SPI2_IRQ_PRIORITY) || defined(__DOXYGEN__)
+#define STM32_I2S_SPI2_IRQ_PRIORITY 10
+#endif
+
+/**
+ * @brief I2S3 interrupt priority level setting.
+ */
+#if !defined(STM32_I2S_SPI3_IRQ_PRIORITY) || defined(__DOXYGEN__)
+#define STM32_I2S_SPI3_IRQ_PRIORITY 10
+#endif
+
+/**
+ * @brief I2S1 DMA priority (0..3|lowest..highest).
+ */
+#if !defined(STM32_I2S_SPI1_DMA_PRIORITY) || defined(__DOXYGEN__)
+#define STM32_I2S_SPI1_DMA_PRIORITY 1
+#endif
+
+/**
+ * @brief I2S2 DMA priority (0..3|lowest..highest).
+ */
+#if !defined(STM32_I2S_SPI2_DMA_PRIORITY) || defined(__DOXYGEN__)
+#define STM32_I2S_SPI2_DMA_PRIORITY 1
+#endif
+
+/**
+ * @brief I2S3 DMA priority (0..3|lowest..highest).
+ */
+#if !defined(STM32_I2S_SPI3_DMA_PRIORITY) || defined(__DOXYGEN__)
+#define STM32_I2S_SPI3_DMA_PRIORITY 1
+#endif
+
+/**
+ * @brief I2S DMA error hook.
+ */
+#if !defined(STM32_I2S_DMA_ERROR_HOOK) || defined(__DOXYGEN__)
+#define STM32_I2S_DMA_ERROR_HOOK(i2sp) osalSysHalt("DMA failure")
+#endif
+/** @} */
+
+/*===========================================================================*/
+/* Derived constants and error checks. */
+/*===========================================================================*/
+
+#if STM32_I2S_USE_SPI1 && !STM32_SPI1_SUPPORTS_I2S
+#error "SPI1 does not support I2S mode"
+#endif
+
+#if STM32_I2S_USE_SPI2 && !STM32_SPI2_SUPPORTS_I2S
+#error "SPI2 does not support I2S mode"
+#endif
+
+#if STM32_I2S_USE_SPI3 && !STM32_SPI3_SUPPORTS_I2S
+#error "SPI3 does not support I2S mode"
+#endif
+
+#if STM32_I2S_RX_ENABLED(STM32_I2S_SPI1_MODE) && \
+ STM32_I2S_TX_ENABLED(STM32_I2S_SPI1_MODE)
+#error "I2S1 RX and TX mode not supported in this driver implementation"
+#endif
+
+#if STM32_I2S_RX_ENABLED(STM32_I2S_SPI2_MODE) && \
+ STM32_I2S_TX_ENABLED(STM32_I2S_SPI2_MODE)
+#error "I2S2 RX and TX mode not supported in this driver implementation"
+#endif
+
+#if STM32_I2S_RX_ENABLED(STM32_I2S_SPI3_MODE) && \
+ STM32_I2S_TX_ENABLED(STM32_I2S_SPI3_MODE)
+#error "I2S3 RX and TX mode not supported in this driver implementation"
+#endif
+
+#if STM32_I2S_USE_SPI1 && !STM32_HAS_SPI1
+#error "SPI1 not present in the selected device"
+#endif
+
+#if STM32_I2S_USE_SPI2 && !STM32_HAS_SPI2
+#error "SPI2 not present in the selected device"
+#endif
+
+#if STM32_I2S_USE_SPI3 && !STM32_HAS_SPI3
+#error "SPI3 not present in the selected device"
+#endif
+
+#if !STM32_I2S_USE_SPI1 && !STM32_I2S_USE_SPI2 && !STM32_I2S_USE_SPI3
+#error "I2S driver activated but no SPI peripheral assigned"
+#endif
+
+#if STM32_I2S_USE_SPI1 && \
+ !OSAL_IRQ_IS_VALID_PRIORITY(STM32_I2S_SPI1_IRQ_PRIORITY)
+#error "Invalid IRQ priority assigned to SPI1"
+#endif
+
+#if STM32_I2S_USE_SPI2 && \
+ !OSAL_IRQ_IS_VALID_PRIORITY(STM32_I2S_SPI2_IRQ_PRIORITY)
+#error "Invalid IRQ priority assigned to SPI2"
+#endif
+
+#if STM32_I2S_USE_SPI3 && \
+ !OSAL_IRQ_IS_VALID_PRIORITY(STM32_I2S_SPI3_IRQ_PRIORITY)
+#error "Invalid IRQ priority assigned to SPI3"
+#endif
+
+#if STM32_I2S_USE_SPI1 && \
+ !STM32_DMA_IS_VALID_PRIORITY(STM32_I2S_SPI1_DMA_PRIORITY)
+#error "Invalid DMA priority assigned to SPI1"
+#endif
+
+#if STM32_I2S_USE_SPI2 && \
+ !STM32_DMA_IS_VALID_PRIORITY(STM32_I2S_SPI2_DMA_PRIORITY)
+#error "Invalid DMA priority assigned to SPI2"
+#endif
+
+#if STM32_I2S_USE_SPI3 && \
+ !STM32_DMA_IS_VALID_PRIORITY(STM32_I2S_SPI3_DMA_PRIORITY)
+#error "Invalid DMA priority assigned to SPI3"
+#endif
+
+/* The following checks are only required when there is a DMA able to
+ reassign streams to different channels.*/
+#if STM32_ADVANCED_DMA
+/* Check on the presence of the DMA streams settings in mcuconf.h.*/
+#if STM32_I2S_USE_SPI1 && (!defined(STM32_I2S_SPI1_RX_DMA_STREAM) || \
+ !defined(STM32_I2S_SPI1_TX_DMA_STREAM))
+#error "SPI1 DMA streams not defined"
+#endif
+
+#if STM32_I2S_USE_SPI2 && (!defined(STM32_I2S_SPI2_RX_DMA_STREAM) || \
+ !defined(STM32_I2S_SPI2_TX_DMA_STREAM))
+#error "SPI2 DMA streams not defined"
+#endif
+
+#if STM32_I2S_USE_SPI3 && (!defined(STM32_I2S_SPI3_RX_DMA_STREAM) || \
+ !defined(STM32_I2S_SPI3_TX_DMA_STREAM))
+#error "SPI3 DMA streams not defined"
+#endif
+
+/* Check on the validity of the assigned DMA channels.*/
+#if STM32_I2S_USE_SPI1 && \
+ !STM32_DMA_IS_VALID_ID(STM32_I2S_SPI1_RX_DMA_STREAM, STM32_SPI1_RX_DMA_MSK)
+#error "invalid DMA stream associated to SPI1 RX"
+#endif
+
+#if STM32_I2S_USE_SPI1 && \
+ !STM32_DMA_IS_VALID_ID(STM32_I2S_SPI1_TX_DMA_STREAM, STM32_SPI1_TX_DMA_MSK)
+#error "invalid DMA stream associated to SPI1 TX"
+#endif
+
+#if STM32_I2S_USE_SPI2 && \
+ !STM32_DMA_IS_VALID_ID(STM32_I2S_SPI2_RX_DMA_STREAM, STM32_SPI2_RX_DMA_MSK)
+#error "invalid DMA stream associated to SPI2 RX"
+#endif
+
+#if STM32_I2S_USE_SPI2 && \
+ !STM32_DMA_IS_VALID_ID(STM32_I2S_SPI2_TX_DMA_STREAM, STM32_SPI2_TX_DMA_MSK)
+#error "invalid DMA stream associated to SPI2 TX"
+#endif
+
+#if STM32_I2S_USE_SPI3 && \
+ !STM32_DMA_IS_VALID_ID(STM32_I2S_SPI3_RX_DMA_STREAM, STM32_SPI3_RX_DMA_MSK)
+#error "invalid DMA stream associated to SPI3 RX"
+#endif
+
+#if STM32_I2S_USE_SPI3 && \
+ !STM32_DMA_IS_VALID_ID(STM32_I2S_SPI3_TX_DMA_STREAM, STM32_SPI3_TX_DMA_MSK)
+#error "invalid DMA stream associated to SPI3 TX"
+#endif
+#endif /* STM32_ADVANCED_DMA */
+
+#if !defined(STM32_DMA_REQUIRED)
+#define STM32_DMA_REQUIRED
+#endif
+
+/*===========================================================================*/
+/* Driver data structures and types. */
+/*===========================================================================*/
+
+/**
+ * @brief Type of a structure representing an I2S driver.
+ */
+typedef struct I2SDriver I2SDriver;
+
+/**
+ * @brief I2S notification callback type.
+ *
+ * @param[in] i2sp pointer to the @p I2SDriver object
+ * @param[in] offset offset in buffers of the data to read/write
+ * @param[in] n number of samples to read/write
+ */
+typedef void (*i2scallback_t)(I2SDriver *i2sp, size_t offset, size_t n);
+
+/**
+ * @brief Driver configuration structure.
+ * @note It could be empty on some architectures.
+ */
+typedef struct {
+ /**
+ * @brief Transmission buffer pointer.
+ * @note Can be @p NULL if TX is not required.
+ */
+ const void *tx_buffer;
+ /**
+ * @brief Receive buffer pointer.
+ * @note Can be @p NULL if RX is not required.
+ */
+ void *rx_buffer;
+ /**
+ * @brief TX and RX buffers size as number of samples.
+ */
+ size_t size;
+ /**
+ * @brief Callback function called during streaming.
+ */
+ i2scallback_t end_cb;
+ /* End of the mandatory fields.*/
+ /**
+ * @brief Configuration of the I2SCFGR register.
+ * @details See the STM32 reference manual, this register is used for
+ * the I2S configuration, the following bits must not be
+ * specified because handled directly by the driver:
+ * - I2SMOD
+ * - I2SE
+ * - I2SCFG
+ * .
+ */
+ int16_t i2scfgr;
+ /**
+ * @brief Configuration of the I2SPR register.
+ * @details See the STM32 reference manual, this register is used for
+ * the I2S clock setup.
+ */
+ int16_t i2spr;
+} I2SConfig;
+
+/**
+ * @brief Structure representing an I2S driver.
+ */
+struct I2SDriver {
+ /**
+ * @brief Driver state.
+ */
+ i2sstate_t state;
+ /**
+ * @brief Current configuration data.
+ */
+ const I2SConfig *config;
+ /* End of the mandatory fields.*/
+ /**
+ * @brief Pointer to the SPIx registers block.
+ */
+ SPI_TypeDef *spi;
+ /**
+ * @brief Calculated part of the I2SCFGR register.
+ */
+ uint16_t cfg;
+ /**
+ * @brief Receive DMA stream or @p NULL.
+ */
+ const stm32_dma_stream_t *dmarx;
+ /**
+ * @brief Transmit DMA stream or @p NULL.
+ */
+ const stm32_dma_stream_t *dmatx;
+ /**
+ * @brief RX DMA mode bit mask.
+ */
+ uint32_t rxdmamode;
+ /**
+ * @brief TX DMA mode bit mask.
+ */
+ uint32_t txdmamode;
+};
+
+/*===========================================================================*/
+/* Driver macros. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* External declarations. */
+/*===========================================================================*/
+
+#if STM32_I2S_USE_SPI1 && !defined(__DOXYGEN__)
+extern I2SDriver I2SD1;
+#endif
+
+#if STM32_I2S_USE_SPI2 && !defined(__DOXYGEN__)
+extern I2SDriver I2SD2;
+#endif
+
+#if STM32_I2S_USE_SPI3 && !defined(__DOXYGEN__)
+extern I2SDriver I2SD3;
+#endif
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+ void i2s_lld_init(void);
+ void i2s_lld_start(I2SDriver *i2sp);
+ void i2s_lld_stop(I2SDriver *i2sp);
+ void i2s_lld_start_exchange(I2SDriver *i2sp);
+ void i2s_lld_stop_exchange(I2SDriver *i2sp);
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* HAL_USE_I2S */
+
+#endif /* HAL_I2S_LLD_H */
+
+/** @} */
diff --git a/os/hal/ports/STM32/LLD/SPIv3/hal_spi_lld.c b/os/hal/ports/STM32/LLD/SPIv3/hal_spi_lld.c new file mode 100644 index 000000000..14311260d --- /dev/null +++ b/os/hal/ports/STM32/LLD/SPIv3/hal_spi_lld.c @@ -0,0 +1,670 @@ +/*
+ ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+/**
+ * @file SPIv2/hal_spi_lld.c
+ * @brief STM32 SPI subsystem low level driver source.
+ *
+ * @addtogroup SPI
+ * @{
+ */
+
+#include "hal.h"
+
+#if HAL_USE_SPI || defined(__DOXYGEN__)
+
+/*===========================================================================*/
+/* Driver local definitions. */
+/*===========================================================================*/
+
+#define SPI1_RX_DMA_CHANNEL \
+ STM32_DMA_GETCHANNEL(STM32_SPI_SPI1_RX_DMA_STREAM, \
+ STM32_SPI1_RX_DMA_CHN)
+
+#define SPI1_TX_DMA_CHANNEL \
+ STM32_DMA_GETCHANNEL(STM32_SPI_SPI1_TX_DMA_STREAM, \
+ STM32_SPI1_TX_DMA_CHN)
+
+#define SPI2_RX_DMA_CHANNEL \
+ STM32_DMA_GETCHANNEL(STM32_SPI_SPI2_RX_DMA_STREAM, \
+ STM32_SPI2_RX_DMA_CHN)
+
+#define SPI2_TX_DMA_CHANNEL \
+ STM32_DMA_GETCHANNEL(STM32_SPI_SPI2_TX_DMA_STREAM, \
+ STM32_SPI2_TX_DMA_CHN)
+
+#define SPI3_RX_DMA_CHANNEL \
+ STM32_DMA_GETCHANNEL(STM32_SPI_SPI3_RX_DMA_STREAM, \
+ STM32_SPI3_RX_DMA_CHN)
+
+#define SPI3_TX_DMA_CHANNEL \
+ STM32_DMA_GETCHANNEL(STM32_SPI_SPI3_TX_DMA_STREAM, \
+ STM32_SPI3_TX_DMA_CHN)
+
+#define SPI4_RX_DMA_CHANNEL \
+ STM32_DMA_GETCHANNEL(STM32_SPI_SPI4_RX_DMA_STREAM, \
+ STM32_SPI4_RX_DMA_CHN)
+
+#define SPI4_TX_DMA_CHANNEL \
+ STM32_DMA_GETCHANNEL(STM32_SPI_SPI4_TX_DMA_STREAM, \
+ STM32_SPI4_TX_DMA_CHN)
+
+#define SPI5_RX_DMA_CHANNEL \
+ STM32_DMA_GETCHANNEL(STM32_SPI_SPI5_RX_DMA_STREAM, \
+ STM32_SPI5_RX_DMA_CHN)
+
+#define SPI5_TX_DMA_CHANNEL \
+ STM32_DMA_GETCHANNEL(STM32_SPI_SPI5_TX_DMA_STREAM, \
+ STM32_SPI5_TX_DMA_CHN)
+
+#define SPI6_RX_DMA_CHANNEL \
+ STM32_DMA_GETCHANNEL(STM32_SPI_SPI6_RX_DMA_STREAM, \
+ STM32_SPI6_RX_DMA_CHN)
+
+#define SPI6_TX_DMA_CHANNEL \
+ STM32_DMA_GETCHANNEL(STM32_SPI_SPI6_TX_DMA_STREAM, \
+ STM32_SPI6_TX_DMA_CHN)
+
+/*===========================================================================*/
+/* Driver exported variables. */
+/*===========================================================================*/
+
+/** @brief SPI1 driver identifier.*/
+#if STM32_SPI_USE_SPI1 || defined(__DOXYGEN__)
+SPIDriver SPID1;
+#endif
+
+/** @brief SPI2 driver identifier.*/
+#if STM32_SPI_USE_SPI2 || defined(__DOXYGEN__)
+SPIDriver SPID2;
+#endif
+
+/** @brief SPI3 driver identifier.*/
+#if STM32_SPI_USE_SPI3 || defined(__DOXYGEN__)
+SPIDriver SPID3;
+#endif
+
+/** @brief SPI4 driver identifier.*/
+#if STM32_SPI_USE_SPI4 || defined(__DOXYGEN__)
+SPIDriver SPID4;
+#endif
+
+/** @brief SPI5 driver identifier.*/
+#if STM32_SPI_USE_SPI5 || defined(__DOXYGEN__)
+SPIDriver SPID5;
+#endif
+
+/** @brief SPI6 driver identifier.*/
+#if STM32_SPI_USE_SPI6 || defined(__DOXYGEN__)
+SPIDriver SPID6;
+#endif
+
+/*===========================================================================*/
+/* Driver local variables and types. */
+/*===========================================================================*/
+
+static const uint16_t dummytx = 0xFFFFU;
+static uint16_t dummyrx;
+
+/*===========================================================================*/
+/* Driver local functions. */
+/*===========================================================================*/
+
+/**
+ * @brief Shared end-of-rx service routine.
+ *
+ * @param[in] spip pointer to the @p SPIDriver object
+ * @param[in] flags pre-shifted content of the ISR register
+ */
+static void spi_lld_serve_rx_interrupt(SPIDriver *spip, uint32_t flags) {
+
+ /* DMA errors handling.*/
+#if defined(STM32_SPI_DMA_ERROR_HOOK)
+ if ((flags & (STM32_DMA_ISR_TEIF | STM32_DMA_ISR_DMEIF)) != 0) {
+ STM32_SPI_DMA_ERROR_HOOK(spip);
+ }
+#else
+ (void)flags;
+#endif
+
+ /* Stop everything.*/
+ dmaStreamDisable(spip->dmatx);
+ dmaStreamDisable(spip->dmarx);
+
+ /* Portable SPI ISR code defined in the high level driver, note, it is
+ a macro.*/
+ _spi_isr_code(spip);
+}
+
+/**
+ * @brief Shared end-of-tx service routine.
+ *
+ * @param[in] spip pointer to the @p SPIDriver object
+ * @param[in] flags pre-shifted content of the ISR register
+ */
+static void spi_lld_serve_tx_interrupt(SPIDriver *spip, uint32_t flags) {
+
+ /* DMA errors handling.*/
+#if defined(STM32_SPI_DMA_ERROR_HOOK)
+ (void)spip;
+ if ((flags & (STM32_DMA_ISR_TEIF | STM32_DMA_ISR_DMEIF)) != 0) {
+ STM32_SPI_DMA_ERROR_HOOK(spip);
+ }
+#else
+ (void)spip;
+ (void)flags;
+#endif
+}
+
+/*===========================================================================*/
+/* Driver interrupt handlers. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver exported functions. */
+/*===========================================================================*/
+
+/**
+ * @brief Low level SPI driver initialization.
+ *
+ * @notapi
+ */
+void spi_lld_init(void) {
+
+#if STM32_SPI_USE_SPI1
+ spiObjectInit(&SPID1);
+ SPID1.spi = SPI1;
+ SPID1.dmarx = STM32_DMA_STREAM(STM32_SPI_SPI1_RX_DMA_STREAM);
+ SPID1.dmatx = STM32_DMA_STREAM(STM32_SPI_SPI1_TX_DMA_STREAM);
+ SPID1.rxdmamode = STM32_DMA_CR_CHSEL(SPI1_RX_DMA_CHANNEL) |
+ STM32_DMA_CR_PL(STM32_SPI_SPI1_DMA_PRIORITY) |
+ STM32_DMA_CR_DIR_P2M |
+ STM32_DMA_CR_TCIE |
+ STM32_DMA_CR_DMEIE |
+ STM32_DMA_CR_TEIE;
+ SPID1.txdmamode = STM32_DMA_CR_CHSEL(SPI1_TX_DMA_CHANNEL) |
+ STM32_DMA_CR_PL(STM32_SPI_SPI1_DMA_PRIORITY) |
+ STM32_DMA_CR_DIR_M2P |
+ STM32_DMA_CR_DMEIE |
+ STM32_DMA_CR_TEIE;
+#endif
+
+#if STM32_SPI_USE_SPI2
+ spiObjectInit(&SPID2);
+ SPID2.spi = SPI2;
+ SPID2.dmarx = STM32_DMA_STREAM(STM32_SPI_SPI2_RX_DMA_STREAM);
+ SPID2.dmatx = STM32_DMA_STREAM(STM32_SPI_SPI2_TX_DMA_STREAM);
+ SPID2.rxdmamode = STM32_DMA_CR_CHSEL(SPI2_RX_DMA_CHANNEL) |
+ STM32_DMA_CR_PL(STM32_SPI_SPI2_DMA_PRIORITY) |
+ STM32_DMA_CR_DIR_P2M |
+ STM32_DMA_CR_TCIE |
+ STM32_DMA_CR_DMEIE |
+ STM32_DMA_CR_TEIE;
+ SPID2.txdmamode = STM32_DMA_CR_CHSEL(SPI2_TX_DMA_CHANNEL) |
+ STM32_DMA_CR_PL(STM32_SPI_SPI2_DMA_PRIORITY) |
+ STM32_DMA_CR_DIR_M2P |
+ STM32_DMA_CR_DMEIE |
+ STM32_DMA_CR_TEIE;
+#endif
+
+#if STM32_SPI_USE_SPI3
+ spiObjectInit(&SPID3);
+ SPID3.spi = SPI3;
+ SPID3.dmarx = STM32_DMA_STREAM(STM32_SPI_SPI3_RX_DMA_STREAM);
+ SPID3.dmatx = STM32_DMA_STREAM(STM32_SPI_SPI3_TX_DMA_STREAM);
+ SPID3.rxdmamode = STM32_DMA_CR_CHSEL(SPI3_RX_DMA_CHANNEL) |
+ STM32_DMA_CR_PL(STM32_SPI_SPI3_DMA_PRIORITY) |
+ STM32_DMA_CR_DIR_P2M |
+ STM32_DMA_CR_TCIE |
+ STM32_DMA_CR_DMEIE |
+ STM32_DMA_CR_TEIE;
+ SPID3.txdmamode = STM32_DMA_CR_CHSEL(SPI3_TX_DMA_CHANNEL) |
+ STM32_DMA_CR_PL(STM32_SPI_SPI3_DMA_PRIORITY) |
+ STM32_DMA_CR_DIR_M2P |
+ STM32_DMA_CR_DMEIE |
+ STM32_DMA_CR_TEIE;
+#endif
+
+#if STM32_SPI_USE_SPI4
+ spiObjectInit(&SPID4);
+ SPID4.spi = SPI4;
+ SPID4.dmarx = STM32_DMA_STREAM(STM32_SPI_SPI4_RX_DMA_STREAM);
+ SPID4.dmatx = STM32_DMA_STREAM(STM32_SPI_SPI4_TX_DMA_STREAM);
+ SPID4.rxdmamode = STM32_DMA_CR_CHSEL(SPI4_RX_DMA_CHANNEL) |
+ STM32_DMA_CR_PL(STM32_SPI_SPI4_DMA_PRIORITY) |
+ STM32_DMA_CR_DIR_P2M |
+ STM32_DMA_CR_TCIE |
+ STM32_DMA_CR_DMEIE |
+ STM32_DMA_CR_TEIE;
+ SPID4.txdmamode = STM32_DMA_CR_CHSEL(SPI4_TX_DMA_CHANNEL) |
+ STM32_DMA_CR_PL(STM32_SPI_SPI4_DMA_PRIORITY) |
+ STM32_DMA_CR_DIR_M2P |
+ STM32_DMA_CR_DMEIE |
+ STM32_DMA_CR_TEIE;
+#endif
+
+#if STM32_SPI_USE_SPI5
+ spiObjectInit(&SPID5);
+ SPID5.spi = SPI5;
+ SPID5.dmarx = STM32_DMA_STREAM(STM32_SPI_SPI5_RX_DMA_STREAM);
+ SPID5.dmatx = STM32_DMA_STREAM(STM32_SPI_SPI5_TX_DMA_STREAM);
+ SPID5.rxdmamode = STM32_DMA_CR_CHSEL(SPI5_RX_DMA_CHANNEL) |
+ STM32_DMA_CR_PL(STM32_SPI_SPI5_DMA_PRIORITY) |
+ STM32_DMA_CR_DIR_P2M |
+ STM32_DMA_CR_TCIE |
+ STM32_DMA_CR_DMEIE |
+ STM32_DMA_CR_TEIE;
+ SPID5.txdmamode = STM32_DMA_CR_CHSEL(SPI5_TX_DMA_CHANNEL) |
+ STM32_DMA_CR_PL(STM32_SPI_SPI5_DMA_PRIORITY) |
+ STM32_DMA_CR_DIR_M2P |
+ STM32_DMA_CR_DMEIE |
+ STM32_DMA_CR_TEIE;
+#endif
+
+#if STM32_SPI_USE_SPI6
+ spiObjectInit(&SPID6);
+ SPID6.spi = SPI6;
+ SPID6.dmarx = STM32_DMA_STREAM(STM32_SPI_SPI6_RX_DMA_STREAM);
+ SPID6.dmatx = STM32_DMA_STREAM(STM32_SPI_SPI6_TX_DMA_STREAM);
+ SPID6.rxdmamode = STM32_DMA_CR_CHSEL(SPI6_RX_DMA_CHANNEL) |
+ STM32_DMA_CR_PL(STM32_SPI_SPI6_DMA_PRIORITY) |
+ STM32_DMA_CR_DIR_P2M |
+ STM32_DMA_CR_TCIE |
+ STM32_DMA_CR_DMEIE |
+ STM32_DMA_CR_TEIE;
+ SPID6.txdmamode = STM32_DMA_CR_CHSEL(SPI6_TX_DMA_CHANNEL) |
+ STM32_DMA_CR_PL(STM32_SPI_SPI6_DMA_PRIORITY) |
+ STM32_DMA_CR_DIR_M2P |
+ STM32_DMA_CR_DMEIE |
+ STM32_DMA_CR_TEIE;
+#endif
+}
+
+/**
+ * @brief Configures and activates the SPI peripheral.
+ *
+ * @param[in] spip pointer to the @p SPIDriver object
+ *
+ * @notapi
+ */
+void spi_lld_start(SPIDriver *spip) {
+ uint32_t ds;
+
+ /* If in stopped state then enables the SPI and DMA clocks.*/
+ if (spip->state == SPI_STOP) {
+#if STM32_SPI_USE_SPI1
+ if (&SPID1 == spip) {
+ bool b;
+ b = dmaStreamAllocate(spip->dmarx,
+ STM32_SPI_SPI1_IRQ_PRIORITY,
+ (stm32_dmaisr_t)spi_lld_serve_rx_interrupt,
+ (void *)spip);
+ osalDbgAssert(!b, "stream already allocated");
+ b = dmaStreamAllocate(spip->dmatx,
+ STM32_SPI_SPI1_IRQ_PRIORITY,
+ (stm32_dmaisr_t)spi_lld_serve_tx_interrupt,
+ (void *)spip);
+ osalDbgAssert(!b, "stream already allocated");
+ rccEnableSPI1(FALSE);
+ }
+#endif
+#if STM32_SPI_USE_SPI2
+ if (&SPID2 == spip) {
+ bool b;
+ b = dmaStreamAllocate(spip->dmarx,
+ STM32_SPI_SPI2_IRQ_PRIORITY,
+ (stm32_dmaisr_t)spi_lld_serve_rx_interrupt,
+ (void *)spip);
+ osalDbgAssert(!b, "stream already allocated");
+ b = dmaStreamAllocate(spip->dmatx,
+ STM32_SPI_SPI2_IRQ_PRIORITY,
+ (stm32_dmaisr_t)spi_lld_serve_tx_interrupt,
+ (void *)spip);
+ osalDbgAssert(!b, "stream already allocated");
+ rccEnableSPI2(FALSE);
+ }
+#endif
+#if STM32_SPI_USE_SPI3
+ if (&SPID3 == spip) {
+ bool b;
+ b = dmaStreamAllocate(spip->dmarx,
+ STM32_SPI_SPI3_IRQ_PRIORITY,
+ (stm32_dmaisr_t)spi_lld_serve_rx_interrupt,
+ (void *)spip);
+ osalDbgAssert(!b, "stream already allocated");
+ b = dmaStreamAllocate(spip->dmatx,
+ STM32_SPI_SPI3_IRQ_PRIORITY,
+ (stm32_dmaisr_t)spi_lld_serve_tx_interrupt,
+ (void *)spip);
+ osalDbgAssert(!b, "stream already allocated");
+ rccEnableSPI3(FALSE);
+ }
+#endif
+#if STM32_SPI_USE_SPI4
+ if (&SPID4 == spip) {
+ bool b;
+ b = dmaStreamAllocate(spip->dmarx,
+ STM32_SPI_SPI4_IRQ_PRIORITY,
+ (stm32_dmaisr_t)spi_lld_serve_rx_interrupt,
+ (void *)spip);
+ osalDbgAssert(!b, "stream already allocated");
+ b = dmaStreamAllocate(spip->dmatx,
+ STM32_SPI_SPI4_IRQ_PRIORITY,
+ (stm32_dmaisr_t)spi_lld_serve_tx_interrupt,
+ (void *)spip);
+ osalDbgAssert(!b, "stream already allocated");
+ rccEnableSPI4(FALSE);
+ }
+#endif
+#if STM32_SPI_USE_SPI5
+ if (&SPID5 == spip) {
+ bool b;
+ b = dmaStreamAllocate(spip->dmarx,
+ STM32_SPI_SPI5_IRQ_PRIORITY,
+ (stm32_dmaisr_t)spi_lld_serve_rx_interrupt,
+ (void *)spip);
+ osalDbgAssert(!b, "stream already allocated");
+ b = dmaStreamAllocate(spip->dmatx,
+ STM32_SPI_SPI5_IRQ_PRIORITY,
+ (stm32_dmaisr_t)spi_lld_serve_tx_interrupt,
+ (void *)spip);
+ osalDbgAssert(!b, "stream already allocated");
+ rccEnableSPI5(FALSE);
+ }
+#endif
+#if STM32_SPI_USE_SPI6
+ if (&SPID6 == spip) {
+ bool b;
+ b = dmaStreamAllocate(spip->dmarx,
+ STM32_SPI_SPI6_IRQ_PRIORITY,
+ (stm32_dmaisr_t)spi_lld_serve_rx_interrupt,
+ (void *)spip);
+ osalDbgAssert(!b, "stream already allocated");
+ b = dmaStreamAllocate(spip->dmatx,
+ STM32_SPI_SPI6_IRQ_PRIORITY,
+ (stm32_dmaisr_t)spi_lld_serve_tx_interrupt,
+ (void *)spip);
+ osalDbgAssert(!b, "stream already allocated");
+ rccEnableSPI6(FALSE);
+ }
+#endif
+
+#if 0
+ /* DMA setup.*/
+ dmaStreamSetPeripheral(spip->dmarx, &spip->spi->DR);
+ dmaStreamSetPeripheral(spip->dmatx, &spip->spi->DR);
+#endif
+ }
+
+#if 0
+ /* Configuration-specific DMA setup.*/
+ ds = spip->config->cr2 & SPI_CR2_DS;
+ if (!ds || (ds <= (SPI_CR2_DS_2 | SPI_CR2_DS_1 | SPI_CR2_DS_0))) {
+ /* Frame width is 8 bits or smaller.*/
+ spip->rxdmamode = (spip->rxdmamode & ~STM32_DMA_CR_SIZE_MASK) |
+ STM32_DMA_CR_PSIZE_BYTE | STM32_DMA_CR_MSIZE_BYTE;
+ spip->txdmamode = (spip->txdmamode & ~STM32_DMA_CR_SIZE_MASK) |
+ STM32_DMA_CR_PSIZE_BYTE | STM32_DMA_CR_MSIZE_BYTE;
+ }
+ else {
+ /* Frame width is larger than 8 bits.*/
+ spip->rxdmamode = (spip->rxdmamode & ~STM32_DMA_CR_SIZE_MASK) |
+ STM32_DMA_CR_PSIZE_HWORD | STM32_DMA_CR_MSIZE_HWORD;
+ spip->txdmamode = (spip->txdmamode & ~STM32_DMA_CR_SIZE_MASK) |
+ STM32_DMA_CR_PSIZE_HWORD | STM32_DMA_CR_MSIZE_HWORD;
+ }
+
+ /* SPI setup and enable.*/
+ spip->spi->CR1 &= ~SPI_CR1_SPE;
+ spip->spi->CR1 = spip->config->cr1 | SPI_CR1_MSTR;
+ spip->spi->CR2 = spip->config->cr2 | SPI_CR2_FRXTH | SPI_CR2_SSOE |
+ SPI_CR2_RXDMAEN | SPI_CR2_TXDMAEN;
+#endif
+ spip->spi->CR1 |= SPI_CR1_SPE;
+}
+
+/**
+ * @brief Deactivates the SPI peripheral.
+ *
+ * @param[in] spip pointer to the @p SPIDriver object
+ *
+ * @notapi
+ */
+void spi_lld_stop(SPIDriver *spip) {
+
+ /* If in ready state then disables the SPI clock.*/
+ if (spip->state == SPI_READY) {
+
+ /* SPI disable.*/
+ spip->spi->CR1 &= ~SPI_CR1_SPE;
+ spip->spi->CR1 = 0;
+ spip->spi->CR2 = 0;
+ dmaStreamRelease(spip->dmarx);
+ dmaStreamRelease(spip->dmatx);
+
+#if STM32_SPI_USE_SPI1
+ if (&SPID1 == spip)
+ rccDisableSPI1();
+#endif
+#if STM32_SPI_USE_SPI2
+ if (&SPID2 == spip)
+ rccDisableSPI2();
+#endif
+#if STM32_SPI_USE_SPI3
+ if (&SPID3 == spip)
+ rccDisableSPI3();
+#endif
+#if STM32_SPI_USE_SPI4
+ if (&SPID4 == spip)
+ rccDisableSPI4();
+#endif
+#if STM32_SPI_USE_SPI5
+ if (&SPID5 == spip)
+ rccDisableSPI5();
+#endif
+#if STM32_SPI_USE_SPI6
+ if (&SPID6 == spip)
+ rccDisableSPI6();
+#endif
+ }
+}
+
+#if (SPI_SELECT_MODE == SPI_SELECT_MODE_LLD) || defined(__DOXYGEN__)
+/**
+ * @brief Asserts the slave select signal and prepares for transfers.
+ *
+ * @param[in] spip pointer to the @p SPIDriver object
+ *
+ * @notapi
+ */
+void spi_lld_select(SPIDriver *spip) {
+
+ /* No implementation on STM32.*/
+}
+
+/**
+ * @brief Deasserts the slave select signal.
+ * @details The previously selected peripheral is unselected.
+ *
+ * @param[in] spip pointer to the @p SPIDriver object
+ *
+ * @notapi
+ */
+void spi_lld_unselect(SPIDriver *spip) {
+
+ /* No implementation on STM32.*/
+}
+#endif
+
+/**
+ * @brief Ignores data on the SPI bus.
+ * @details This asynchronous function starts the transmission of a series of
+ * idle words on the SPI bus and ignores the received data.
+ * @post At the end of the operation the configured callback is invoked.
+ *
+ * @param[in] spip pointer to the @p SPIDriver object
+ * @param[in] n number of words to be ignored
+ *
+ * @notapi
+ */
+void spi_lld_ignore(SPIDriver *spip, size_t n) {
+
+ osalDbgAssert(n < 65536, "unsupported DMA transfer size");
+
+ dmaStreamSetMemory0(spip->dmarx, &dummyrx);
+ dmaStreamSetTransactionSize(spip->dmarx, n);
+ dmaStreamSetMode(spip->dmarx, spip->rxdmamode);
+
+ dmaStreamSetMemory0(spip->dmatx, &dummytx);
+ dmaStreamSetTransactionSize(spip->dmatx, n);
+ dmaStreamSetMode(spip->dmatx, spip->txdmamode);
+
+ dmaStreamEnable(spip->dmarx);
+ dmaStreamEnable(spip->dmatx);
+}
+
+/**
+ * @brief Exchanges data on the SPI bus.
+ * @details This asynchronous function starts a simultaneous transmit/receive
+ * operation.
+ * @post At the end of the operation the configured callback is invoked.
+ * @note The buffers are organized as uint8_t arrays for data sizes below or
+ * equal to 8 bits else it is organized as uint16_t arrays.
+ *
+ * @param[in] spip pointer to the @p SPIDriver object
+ * @param[in] n number of words to be exchanged
+ * @param[in] txbuf the pointer to the transmit buffer
+ * @param[out] rxbuf the pointer to the receive buffer
+ *
+ * @notapi
+ */
+void spi_lld_exchange(SPIDriver *spip, size_t n,
+ const void *txbuf, void *rxbuf) {
+
+ osalDbgAssert(n < 65536, "unsupported DMA transfer size");
+
+ dmaStreamSetMemory0(spip->dmarx, rxbuf);
+ dmaStreamSetTransactionSize(spip->dmarx, n);
+ dmaStreamSetMode(spip->dmarx, spip->rxdmamode | STM32_DMA_CR_MINC);
+
+ dmaStreamSetMemory0(spip->dmatx, txbuf);
+ dmaStreamSetTransactionSize(spip->dmatx, n);
+ dmaStreamSetMode(spip->dmatx, spip->txdmamode | STM32_DMA_CR_MINC);
+
+ dmaStreamEnable(spip->dmarx);
+ dmaStreamEnable(spip->dmatx);
+}
+
+/**
+ * @brief Sends data over the SPI bus.
+ * @details This asynchronous function starts a transmit operation.
+ * @post At the end of the operation the configured callback is invoked.
+ * @note The buffers are organized as uint8_t arrays for data sizes below or
+ * equal to 8 bits else it is organized as uint16_t arrays.
+ *
+ * @param[in] spip pointer to the @p SPIDriver object
+ * @param[in] n number of words to send
+ * @param[in] txbuf the pointer to the transmit buffer
+ *
+ * @notapi
+ */
+void spi_lld_send(SPIDriver *spip, size_t n, const void *txbuf) {
+
+ osalDbgAssert(n < 65536, "unsupported DMA transfer size");
+
+ dmaStreamSetMemory0(spip->dmarx, &dummyrx);
+ dmaStreamSetTransactionSize(spip->dmarx, n);
+ dmaStreamSetMode(spip->dmarx, spip->rxdmamode);
+
+ dmaStreamSetMemory0(spip->dmatx, txbuf);
+ dmaStreamSetTransactionSize(spip->dmatx, n);
+ dmaStreamSetMode(spip->dmatx, spip->txdmamode | STM32_DMA_CR_MINC);
+
+ dmaStreamEnable(spip->dmarx);
+ dmaStreamEnable(spip->dmatx);
+}
+
+/**
+ * @brief Receives data from the SPI bus.
+ * @details This asynchronous function starts a receive operation.
+ * @post At the end of the operation the configured callback is invoked.
+ * @note The buffers are organized as uint8_t arrays for data sizes below or
+ * equal to 8 bits else it is organized as uint16_t arrays.
+ *
+ * @param[in] spip pointer to the @p SPIDriver object
+ * @param[in] n number of words to receive
+ * @param[out] rxbuf the pointer to the receive buffer
+ *
+ * @notapi
+ */
+void spi_lld_receive(SPIDriver *spip, size_t n, void *rxbuf) {
+
+ osalDbgAssert(n < 65536, "unsupported DMA transfer size");
+
+ dmaStreamSetMemory0(spip->dmarx, rxbuf);
+ dmaStreamSetTransactionSize(spip->dmarx, n);
+ dmaStreamSetMode(spip->dmarx, spip->rxdmamode | STM32_DMA_CR_MINC);
+
+ dmaStreamSetMemory0(spip->dmatx, &dummytx);
+ dmaStreamSetTransactionSize(spip->dmatx, n);
+ dmaStreamSetMode(spip->dmatx, spip->txdmamode);
+
+ dmaStreamEnable(spip->dmarx);
+ dmaStreamEnable(spip->dmatx);
+}
+
+/**
+ * @brief Exchanges one frame using a polled wait.
+ * @details This synchronous function exchanges one frame using a polled
+ * synchronization method. This function is useful when exchanging
+ * small amount of data on high speed channels, usually in this
+ * situation is much more efficient just wait for completion using
+ * polling than suspending the thread waiting for an interrupt.
+ *
+ * @param[in] spip pointer to the @p SPIDriver object
+ * @param[in] frame the data frame to send over the SPI bus
+ * @return The received data frame from the SPI bus.
+ */
+uint16_t spi_lld_polled_exchange(SPIDriver *spip, uint16_t frame) {
+#if 0
+ /*
+ * Data register must be accessed with the appropriate data size.
+ * Byte size access (uint8_t *) for transactions that are <= 8-bit.
+ * Halfword size access (uint16_t) for transactions that are <= 8-bit.
+ */
+ if ((spip->config->cr2 & SPI_CR2_DS) <= (SPI_CR2_DS_2 |
+ SPI_CR2_DS_1 |
+ SPI_CR2_DS_0)) {
+ volatile uint8_t *spidr = (volatile uint8_t *)&spip->spi->DR;
+ *spidr = (uint8_t)frame;
+ while ((spip->spi->SR & SPI_SR_RXNE) == 0)
+ ;
+ return (uint16_t)*spidr;
+ }
+ else {
+ spip->spi->DR = frame;
+ while ((spip->spi->SR & SPI_SR_RXNE) == 0)
+ ;
+ return spip->spi->DR;
+ }
+#else
+ return 0;
+#endif
+}
+
+#endif /* HAL_USE_SPI */
+
+/** @} */
diff --git a/os/hal/ports/STM32/LLD/SPIv3/hal_spi_lld.h b/os/hal/ports/STM32/LLD/SPIv3/hal_spi_lld.h new file mode 100644 index 000000000..99587c8fe --- /dev/null +++ b/os/hal/ports/STM32/LLD/SPIv3/hal_spi_lld.h @@ -0,0 +1,567 @@ +/*
+ ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+/**
+ * @file SPIv2/hal_spi_lld.h
+ * @brief STM32 SPI subsystem low level driver header.
+ *
+ * @addtogroup SPI
+ * @{
+ */
+
+#ifndef HAL_SPI_LLD_H
+#define HAL_SPI_LLD_H
+
+#if HAL_USE_SPI || defined(__DOXYGEN__)
+
+/*===========================================================================*/
+/* Driver constants. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver pre-compile time settings. */
+/*===========================================================================*/
+
+/**
+ * @name Configuration options
+ * @{
+ */
+/**
+ * @brief SPI1 driver enable switch.
+ * @details If set to @p TRUE the support for SPI1 is included.
+ * @note The default is @p FALSE.
+ */
+#if !defined(STM32_SPI_USE_SPI1) || defined(__DOXYGEN__)
+#define STM32_SPI_USE_SPI1 FALSE
+#endif
+
+/**
+ * @brief SPI2 driver enable switch.
+ * @details If set to @p TRUE the support for SPI2 is included.
+ * @note The default is @p FALSE.
+ */
+#if !defined(STM32_SPI_USE_SPI2) || defined(__DOXYGEN__)
+#define STM32_SPI_USE_SPI2 FALSE
+#endif
+
+/**
+ * @brief SPI3 driver enable switch.
+ * @details If set to @p TRUE the support for SPI3 is included.
+ * @note The default is @p FALSE.
+ */
+#if !defined(STM32_SPI_USE_SPI3) || defined(__DOXYGEN__)
+#define STM32_SPI_USE_SPI3 FALSE
+#endif
+
+/**
+ * @brief SPI4 driver enable switch.
+ * @details If set to @p TRUE the support for SPI4 is included.
+ * @note The default is @p FALSE.
+ */
+#if !defined(STM32_SPI_USE_SPI4) || defined(__DOXYGEN__)
+#define STM32_SPI_USE_SPI4 FALSE
+#endif
+
+/**
+ * @brief SPI5 driver enable switch.
+ * @details If set to @p TRUE the support for SPI5 is included.
+ * @note The default is @p FALSE.
+ */
+#if !defined(STM32_SPI_USE_SPI5) || defined(__DOXYGEN__)
+#define STM32_SPI_USE_SPI5 FALSE
+#endif
+
+/**
+ * @brief SPI6 driver enable switch.
+ * @details If set to @p TRUE the support for SPI6 is included.
+ * @note The default is @p FALSE.
+ */
+#if !defined(STM32_SPI_USE_SPI6) || defined(__DOXYGEN__)
+#define STM32_SPI_USE_SPI6 FALSE
+#endif
+
+/**
+ * @brief SPI1 interrupt priority level setting.
+ */
+#if !defined(STM32_SPI_SPI1_IRQ_PRIORITY) || defined(__DOXYGEN__)
+#define STM32_SPI_SPI1_IRQ_PRIORITY 10
+#endif
+
+/**
+ * @brief SPI2 interrupt priority level setting.
+ */
+#if !defined(STM32_SPI_SPI2_IRQ_PRIORITY) || defined(__DOXYGEN__)
+#define STM32_SPI_SPI2_IRQ_PRIORITY 10
+#endif
+
+/**
+ * @brief SPI3 interrupt priority level setting.
+ */
+#if !defined(STM32_SPI_SPI3_IRQ_PRIORITY) || defined(__DOXYGEN__)
+#define STM32_SPI_SPI3_IRQ_PRIORITY 10
+#endif
+
+/**
+ * @brief SPI4 interrupt priority level setting.
+ */
+#if !defined(STM32_SPI_SPI4_IRQ_PRIORITY) || defined(__DOXYGEN__)
+#define STM32_SPI_SPI4_IRQ_PRIORITY 10
+#endif
+
+/**
+ * @brief SPI5 interrupt priority level setting.
+ */
+#if !defined(STM32_SPI_SPI5_IRQ_PRIORITY) || defined(__DOXYGEN__)
+#define STM32_SPI_SPI5_IRQ_PRIORITY 10
+#endif
+
+/**
+ * @brief SPI6 interrupt priority level setting.
+ */
+#if !defined(STM32_SPI_SPI6_IRQ_PRIORITY) || defined(__DOXYGEN__)
+#define STM32_SPI_SPI6_IRQ_PRIORITY 10
+#endif
+
+/**
+ * @brief SPI1 DMA priority (0..3|lowest..highest).
+ * @note The priority level is used for both the TX and RX DMA streams but
+ * because of the streams ordering the RX stream has always priority
+ * over the TX stream.
+ */
+#if !defined(STM32_SPI_SPI1_DMA_PRIORITY) || defined(__DOXYGEN__)
+#define STM32_SPI_SPI1_DMA_PRIORITY 1
+#endif
+
+/**
+ * @brief SPI2 DMA priority (0..3|lowest..highest).
+ * @note The priority level is used for both the TX and RX DMA streams but
+ * because of the streams ordering the RX stream has always priority
+ * over the TX stream.
+ */
+#if !defined(STM32_SPI_SPI2_DMA_PRIORITY) || defined(__DOXYGEN__)
+#define STM32_SPI_SPI2_DMA_PRIORITY 1
+#endif
+
+/**
+ * @brief SPI3 DMA priority (0..3|lowest..highest).
+ * @note The priority level is used for both the TX and RX DMA streams but
+ * because of the streams ordering the RX stream has always priority
+ * over the TX stream.
+ */
+#if !defined(STM32_SPI_SPI3_DMA_PRIORITY) || defined(__DOXYGEN__)
+#define STM32_SPI_SPI3_DMA_PRIORITY 1
+#endif
+
+/**
+ * @brief SPI4 DMA priority (0..3|lowest..highest).
+ * @note The priority level is used for both the TX and RX DMA streams but
+ * because of the streams ordering the RX stream has always priority
+ * over the TX stream.
+ */
+#if !defined(STM32_SPI_SPI4_DMA_PRIORITY) || defined(__DOXYGEN__)
+#define STM32_SPI_SPI4_DMA_PRIORITY 1
+#endif
+
+/**
+ * @brief SPI5 DMA priority (0..3|lowest..highest).
+ * @note The priority level is used for both the TX and RX DMA streams but
+ * because of the streams ordering the RX stream has always priority
+ * over the TX stream.
+ */
+#if !defined(STM32_SPI_SPI5_DMA_PRIORITY) || defined(__DOXYGEN__)
+#define STM32_SPI_SPI5_DMA_PRIORITY 1
+#endif
+
+/**
+ * @brief SPI6 DMA priority (0..3|lowest..highest).
+ * @note The priority level is used for both the TX and RX DMA streams but
+ * because of the streams ordering the RX stream has always priority
+ * over the TX stream.
+ */
+#if !defined(STM32_SPI_SPI6_DMA_PRIORITY) || defined(__DOXYGEN__)
+#define STM32_SPI_SPI6_DMA_PRIORITY 1
+#endif
+
+/**
+ * @brief SPI DMA error hook.
+ */
+#if !defined(STM32_SPI_DMA_ERROR_HOOK) || defined(__DOXYGEN__)
+#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure")
+#endif
+/** @} */
+
+/*===========================================================================*/
+/* Derived constants and error checks. */
+/*===========================================================================*/
+
+#if STM32_SPI_USE_SPI1 && !STM32_HAS_SPI1
+#error "SPI1 not present in the selected device"
+#endif
+
+#if STM32_SPI_USE_SPI2 && !STM32_HAS_SPI2
+#error "SPI2 not present in the selected device"
+#endif
+
+#if STM32_SPI_USE_SPI3 && !STM32_HAS_SPI3
+#error "SPI3 not present in the selected device"
+#endif
+
+#if STM32_SPI_USE_SPI4 && !STM32_HAS_SPI4
+#error "SPI4 not present in the selected device"
+#endif
+
+#if STM32_SPI_USE_SPI5 && !STM32_HAS_SPI5
+#error "SPI5 not present in the selected device"
+#endif
+
+#if STM32_SPI_USE_SPI6 && !STM32_HAS_SPI6
+#error "SPI6 not present in the selected device"
+#endif
+
+#if !STM32_SPI_USE_SPI1 && !STM32_SPI_USE_SPI2 && !STM32_SPI_USE_SPI3 && \
+ !STM32_SPI_USE_SPI4 && !STM32_SPI_USE_SPI5 && !STM32_SPI_USE_SPI6
+#error "SPI driver activated but no SPI peripheral assigned"
+#endif
+
+#if STM32_SPI_USE_SPI1 && \
+ !OSAL_IRQ_IS_VALID_PRIORITY(STM32_SPI_SPI1_IRQ_PRIORITY)
+#error "Invalid IRQ priority assigned to SPI1"
+#endif
+
+#if STM32_SPI_USE_SPI2 && \
+ !OSAL_IRQ_IS_VALID_PRIORITY(STM32_SPI_SPI2_IRQ_PRIORITY)
+#error "Invalid IRQ priority assigned to SPI2"
+#endif
+
+#if STM32_SPI_USE_SPI3 && \
+ !OSAL_IRQ_IS_VALID_PRIORITY(STM32_SPI_SPI3_IRQ_PRIORITY)
+#error "Invalid IRQ priority assigned to SPI3"
+#endif
+
+#if STM32_SPI_USE_SPI4 && \
+ !OSAL_IRQ_IS_VALID_PRIORITY(STM32_SPI_SPI4_IRQ_PRIORITY)
+#error "Invalid IRQ priority assigned to SPI4"
+#endif
+
+#if STM32_SPI_USE_SPI5 && \
+ !OSAL_IRQ_IS_VALID_PRIORITY(STM32_SPI_SPI5_IRQ_PRIORITY)
+#error "Invalid IRQ priority assigned to SPI5"
+#endif
+
+#if STM32_SPI_USE_SPI6 && \
+ !OSAL_IRQ_IS_VALID_PRIORITY(STM32_SPI_SPI6_IRQ_PRIORITY)
+#error "Invalid IRQ priority assigned to SPI6"
+#endif
+
+#if STM32_SPI_USE_SPI1 && \
+ !STM32_DMA_IS_VALID_PRIORITY(STM32_SPI_SPI1_DMA_PRIORITY)
+#error "Invalid DMA priority assigned to SPI1"
+#endif
+
+#if STM32_SPI_USE_SPI2 && \
+ !STM32_DMA_IS_VALID_PRIORITY(STM32_SPI_SPI2_DMA_PRIORITY)
+#error "Invalid DMA priority assigned to SPI2"
+#endif
+
+#if STM32_SPI_USE_SPI3 && \
+ !STM32_DMA_IS_VALID_PRIORITY(STM32_SPI_SPI3_DMA_PRIORITY)
+#error "Invalid DMA priority assigned to SPI3"
+#endif
+
+#if STM32_SPI_USE_SPI4 && \
+ !STM32_DMA_IS_VALID_PRIORITY(STM32_SPI_SPI4_DMA_PRIORITY)
+#error "Invalid DMA priority assigned to SPI4"
+#endif
+
+#if STM32_SPI_USE_SPI5 && \
+ !STM32_DMA_IS_VALID_PRIORITY(STM32_SPI_SPI5_DMA_PRIORITY)
+#error "Invalid DMA priority assigned to SPI5"
+#endif
+
+#if STM32_SPI_USE_SPI6 && \
+ !STM32_DMA_IS_VALID_PRIORITY(STM32_SPI_SPI6_DMA_PRIORITY)
+#error "Invalid DMA priority assigned to SPI6"
+#endif
+
+/* The following checks are only required when there is a DMA able to
+ reassign streams to different channels.*/
+#if STM32_ADVANCED_DMA
+/* Check on the presence of the DMA streams settings in mcuconf.h.*/
+#if STM32_SPI_USE_SPI1 && (!defined(STM32_SPI_SPI1_RX_DMA_STREAM) || \
+ !defined(STM32_SPI_SPI1_TX_DMA_STREAM))
+#error "SPI1 DMA streams not defined"
+#endif
+
+#if STM32_SPI_USE_SPI2 && (!defined(STM32_SPI_SPI2_RX_DMA_STREAM) || \
+ !defined(STM32_SPI_SPI2_TX_DMA_STREAM))
+#error "SPI2 DMA streams not defined"
+#endif
+
+#if STM32_SPI_USE_SPI3 && (!defined(STM32_SPI_SPI3_RX_DMA_STREAM) || \
+ !defined(STM32_SPI_SPI3_TX_DMA_STREAM))
+#error "SPI3 DMA streams not defined"
+#endif
+
+#if STM32_SPI_USE_SPI4 && (!defined(STM32_SPI_SPI4_RX_DMA_STREAM) || \
+ !defined(STM32_SPI_SPI4_TX_DMA_STREAM))
+#error "SPI4 DMA streams not defined"
+#endif
+
+#if STM32_SPI_USE_SPI5 && (!defined(STM32_SPI_SPI5_RX_DMA_STREAM) || \
+ !defined(STM32_SPI_SPI5_TX_DMA_STREAM))
+#error "SPI5 DMA streams not defined"
+#endif
+
+#if STM32_SPI_USE_SPI6 && (!defined(STM32_SPI_SPI6_RX_DMA_STREAM) || \
+ !defined(STM32_SPI_SPI6_TX_DMA_STREAM))
+#error "SPI6 DMA streams not defined"
+#endif
+
+/* Check on the validity of the assigned DMA channels.*/
+#if STM32_SPI_USE_SPI1 && \
+ !STM32_DMA_IS_VALID_ID(STM32_SPI_SPI1_RX_DMA_STREAM, STM32_SPI1_RX_DMA_MSK)
+#error "invalid DMA stream associated to SPI1 RX"
+#endif
+
+#if STM32_SPI_USE_SPI1 && \
+ !STM32_DMA_IS_VALID_ID(STM32_SPI_SPI1_TX_DMA_STREAM, STM32_SPI1_TX_DMA_MSK)
+#error "invalid DMA stream associated to SPI1 TX"
+#endif
+
+#if STM32_SPI_USE_SPI2 && \
+ !STM32_DMA_IS_VALID_ID(STM32_SPI_SPI2_RX_DMA_STREAM, STM32_SPI2_RX_DMA_MSK)
+#error "invalid DMA stream associated to SPI2 RX"
+#endif
+
+#if STM32_SPI_USE_SPI2 && \
+ !STM32_DMA_IS_VALID_ID(STM32_SPI_SPI2_TX_DMA_STREAM, STM32_SPI2_TX_DMA_MSK)
+#error "invalid DMA stream associated to SPI2 TX"
+#endif
+
+#if STM32_SPI_USE_SPI3 && \
+ !STM32_DMA_IS_VALID_ID(STM32_SPI_SPI3_RX_DMA_STREAM, STM32_SPI3_RX_DMA_MSK)
+#error "invalid DMA stream associated to SPI3 RX"
+#endif
+
+#if STM32_SPI_USE_SPI3 && \
+ !STM32_DMA_IS_VALID_ID(STM32_SPI_SPI3_TX_DMA_STREAM, STM32_SPI3_TX_DMA_MSK)
+#error "invalid DMA stream associated to SPI3 TX"
+#endif
+
+#if STM32_SPI_USE_SPI4 && \
+ !STM32_DMA_IS_VALID_ID(STM32_SPI_SPI4_RX_DMA_STREAM, STM32_SPI4_RX_DMA_MSK)
+#error "invalid DMA stream associated to SPI4 RX"
+#endif
+
+#if STM32_SPI_USE_SPI4 && \
+ !STM32_DMA_IS_VALID_ID(STM32_SPI_SPI4_TX_DMA_STREAM, STM32_SPI4_TX_DMA_MSK)
+#error "invalid DMA stream associated to SPI4 TX"
+#endif
+
+#if STM32_SPI_USE_SPI5 && \
+ !STM32_DMA_IS_VALID_ID(STM32_SPI_SPI5_RX_DMA_STREAM, STM32_SPI5_RX_DMA_MSK)
+#error "invalid DMA stream associated to SPI5 RX"
+#endif
+
+#if STM32_SPI_USE_SPI5 && \
+ !STM32_DMA_IS_VALID_ID(STM32_SPI_SPI5_TX_DMA_STREAM, STM32_SPI5_TX_DMA_MSK)
+#error "invalid DMA stream associated to SPI5 TX"
+#endif
+
+#if STM32_SPI_USE_SPI6 && \
+ !STM32_DMA_IS_VALID_ID(STM32_SPI_SPI6_RX_DMA_STREAM, STM32_SPI6_RX_DMA_MSK)
+#error "invalid DMA stream associated to SPI6 RX"
+#endif
+
+#if STM32_SPI_USE_SPI6 && \
+ !STM32_DMA_IS_VALID_ID(STM32_SPI_SPI6_TX_DMA_STREAM, STM32_SPI6_TX_DMA_MSK)
+#error "invalid DMA stream associated to SPI6 TX"
+#endif
+#endif /* STM32_ADVANCED_DMA */
+
+#if !defined(STM32_DMA_REQUIRED)
+#define STM32_DMA_REQUIRED
+#endif
+
+#if SPI_SELECT_MODE == SPI_SELECT_MODE_LLD
+#error "SPI_SELECT_MODE_LLD not supported by this driver"
+#endif
+
+/*===========================================================================*/
+/* Driver data structures and types. */
+/*===========================================================================*/
+
+/**
+ * @brief Type of a structure representing an SPI driver.
+ */
+typedef struct SPIDriver SPIDriver;
+
+/**
+ * @brief SPI notification callback type.
+ *
+ * @param[in] spip pointer to the @p SPIDriver object triggering the
+ * callback
+ */
+typedef void (*spicallback_t)(SPIDriver *spip);
+
+/**
+ * @brief Driver configuration structure.
+ */
+typedef struct {
+ /**
+ * @brief Operation complete callback or @p NULL.
+ */
+ spicallback_t end_cb;
+#if (SPI_SELECT_MODE == SPI_SELECT_MODE_LINE) || defined(__DOXYGEN__)
+ /**
+ * @brief The chip select line.
+ */
+ ioportid_t ssline;
+#endif
+#if (SPI_SELECT_MODE == SPI_SELECT_MODE_PORT) || defined(__DOXYGEN__)
+ /**
+ * @brief The chip select port.
+ */
+ ioportid_t ssport;
+ /**
+ * @brief The chip select port mask.
+ */
+ uint8fast_t ssmask;
+#endif
+#if (SPI_SELECT_MODE == SPI_SELECT_MODE_PAD) || defined(__DOXYGEN__)
+ /**
+ * @brief The chip select port.
+ */
+ ioportid_t ssport;
+ /**
+ * @brief The chip select pad number.
+ */
+ uint_fast8_t sspad;
+#endif
+ /* End of the mandatory fields.*/
+ /**
+ * @brief SPI CR1 register initialization data.
+ */
+ uint16_t cr1;
+ /**
+ * @brief SPI CR2 register initialization data.
+ */
+ uint16_t cr2;
+} SPIConfig;
+
+/**
+ * @brief Structure representing an SPI driver.
+ */
+struct SPIDriver {
+ /**
+ * @brief Driver state.
+ */
+ spistate_t state;
+ /**
+ * @brief Current configuration data.
+ */
+ const SPIConfig *config;
+#if SPI_USE_WAIT || defined(__DOXYGEN__)
+ /**
+ * @brief Waiting thread.
+ */
+ thread_reference_t thread;
+#endif /* SPI_USE_WAIT */
+#if SPI_USE_MUTUAL_EXCLUSION || defined(__DOXYGEN__)
+ /**
+ * @brief Mutex protecting the peripheral.
+ */
+ mutex_t mutex;
+#endif /* SPI_USE_MUTUAL_EXCLUSION */
+#if defined(SPI_DRIVER_EXT_FIELDS)
+ SPI_DRIVER_EXT_FIELDS
+#endif
+ /* End of the mandatory fields.*/
+ /**
+ * @brief Pointer to the SPIx registers block.
+ */
+ SPI_TypeDef *spi;
+ /**
+ * @brief Receive DMA stream.
+ */
+ const stm32_dma_stream_t *dmarx;
+ /**
+ * @brief Transmit DMA stream.
+ */
+ const stm32_dma_stream_t *dmatx;
+ /**
+ * @brief RX DMA mode bit mask.
+ */
+ uint32_t rxdmamode;
+ /**
+ * @brief TX DMA mode bit mask.
+ */
+ uint32_t txdmamode;
+};
+
+/*===========================================================================*/
+/* Driver macros. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* External declarations. */
+/*===========================================================================*/
+
+#if STM32_SPI_USE_SPI1 && !defined(__DOXYGEN__)
+extern SPIDriver SPID1;
+#endif
+
+#if STM32_SPI_USE_SPI2 && !defined(__DOXYGEN__)
+extern SPIDriver SPID2;
+#endif
+
+#if STM32_SPI_USE_SPI3 && !defined(__DOXYGEN__)
+extern SPIDriver SPID3;
+#endif
+
+#if STM32_SPI_USE_SPI4 && !defined(__DOXYGEN__)
+extern SPIDriver SPID4;
+#endif
+
+#if STM32_SPI_USE_SPI5 && !defined(__DOXYGEN__)
+extern SPIDriver SPID5;
+#endif
+
+#if STM32_SPI_USE_SPI6 && !defined(__DOXYGEN__)
+extern SPIDriver SPID6;
+#endif
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+ void spi_lld_init(void);
+ void spi_lld_start(SPIDriver *spip);
+ void spi_lld_stop(SPIDriver *spip);
+ void spi_lld_ignore(SPIDriver *spip, size_t n);
+ void spi_lld_exchange(SPIDriver *spip, size_t n,
+ const void *txbuf, void *rxbuf);
+ void spi_lld_send(SPIDriver *spip, size_t n, const void *txbuf);
+ void spi_lld_receive(SPIDriver *spip, size_t n, void *rxbuf);
+ uint16_t spi_lld_polled_exchange(SPIDriver *spip, uint16_t frame);
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* HAL_USE_SPI */
+
+#endif /* HAL_SPI_LLD_H */
+
+/** @} */
|