diff options
Diffstat (limited to 'os/hal/ports/LPC/LPC214x/serial_lld.c')
| -rw-r--r-- | os/hal/ports/LPC/LPC214x/serial_lld.c | 346 |
1 files changed, 346 insertions, 0 deletions
diff --git a/os/hal/ports/LPC/LPC214x/serial_lld.c b/os/hal/ports/LPC/LPC214x/serial_lld.c new file mode 100644 index 000000000..ed5ba96d8 --- /dev/null +++ b/os/hal/ports/LPC/LPC214x/serial_lld.c @@ -0,0 +1,346 @@ +/*
+ ChibiOS - Copyright (C) 2006-2014 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+/**
+ * @file LPC214x/serial_lld.c
+ * @brief LPC214x low level serial driver code.
+ *
+ * @addtogroup SERIAL
+ * @{
+ */
+
+#include "hal.h"
+
+#if HAL_USE_SERIAL || defined(__DOXYGEN__)
+
+/*===========================================================================*/
+/* Driver exported variables. */
+/*===========================================================================*/
+
+#if USE_LPC214x_UART0 || defined(__DOXYGEN__)
+/** @brief UART0 serial driver identifier.*/
+SerialDriver SD1;
+#endif
+
+#if USE_LPC214x_UART1 || defined(__DOXYGEN__)
+/** @brief UART1 serial driver identifier.*/
+SerialDriver SD2;
+#endif
+
+/*===========================================================================*/
+/* Driver local variables and types. */
+/*===========================================================================*/
+
+/** @brief Driver default configuration.*/
+static const SerialConfig default_config = {
+ SERIAL_DEFAULT_BITRATE,
+ LCR_WL8 | LCR_STOP1 | LCR_NOPARITY,
+ FCR_TRIGGER0
+};
+
+/*===========================================================================*/
+/* Driver local functions. */
+/*===========================================================================*/
+
+/**
+ * @brief UART initialization.
+ *
+ * @param[in] sdp communication channel associated to the UART
+ * @param[in] config the architecture-dependent serial driver configuration
+ */
+static void uart_init(SerialDriver *sdp, const SerialConfig *config) {
+ UART *u = sdp->uart;
+
+ uint32_t div = PCLK / (config->sc_speed << 4);
+ u->UART_LCR = config->sc_lcr | LCR_DLAB;
+ u->UART_DLL = div;
+ u->UART_DLM = div >> 8;
+ u->UART_LCR = config->sc_lcr;
+ u->UART_FCR = FCR_ENABLE | FCR_RXRESET | FCR_TXRESET | config->sc_fcr;
+ u->UART_ACR = 0;
+ u->UART_FDR = 0x10;
+ u->UART_TER = TER_ENABLE;
+ u->UART_IER = IER_RBR | IER_STATUS;
+}
+
+/**
+ * @brief UART de-initialization.
+ *
+ * @param[in] u pointer to an UART I/O block
+ */
+static void uart_deinit(UART *u) {
+
+ u->UART_LCR = LCR_DLAB;
+ u->UART_DLL = 1;
+ u->UART_DLM = 0;
+ u->UART_LCR = 0;
+ u->UART_FDR = 0x10;
+ u->UART_IER = 0;
+ u->UART_FCR = FCR_RXRESET | FCR_TXRESET;
+ u->UART_ACR = 0;
+ u->UART_TER = TER_ENABLE;
+}
+
+/**
+ * @brief Error handling routine.
+ *
+ * @param[in] sdp communication channel associated to the UART
+ * @param[in] err UART LSR register value
+ */
+static void set_error(SerialDriver *sdp, IOREG32 err) {
+ eventflags_t sts = 0;
+
+ if (err & LSR_OVERRUN)
+ sts |= SD_OVERRUN_ERROR;
+ if (err & LSR_PARITY)
+ sts |= SD_PARITY_ERROR;
+ if (err & LSR_FRAMING)
+ sts |= SD_FRAMING_ERROR;
+ if (err & LSR_BREAK)
+ sts |= SD_BREAK_DETECTED;
+ chSysLockFromISR();
+ chnAddFlagsI(sdp, sts);
+ chSysUnlockFromISR();
+}
+
+#if defined(__GNUC__)
+__attribute__((noinline))
+#endif
+/**
+ * @brief Common IRQ handler.
+ * @note Tries hard to clear all the pending interrupt sources, we dont want
+ * to go through the whole ISR and have another interrupt soon after.
+ *
+ * @param[in] sdp communication channel associated to the UART
+ */
+static void serve_interrupt(SerialDriver *sdp) {
+ UART *u = sdp->uart;
+
+ while (TRUE) {
+ switch (u->UART_IIR & IIR_SRC_MASK) {
+ case IIR_SRC_NONE:
+ return;
+ case IIR_SRC_ERROR:
+ set_error(sdp, u->UART_LSR);
+ break;
+ case IIR_SRC_TIMEOUT:
+ case IIR_SRC_RX:
+ chSysLockFromISR();
+ if (chIQIsEmptyI(&sdp->iqueue))
+ chnAddFlagsI(sdp, CHN_INPUT_AVAILABLE);
+ chSysUnlockFromISR();
+ while (u->UART_LSR & LSR_RBR_FULL) {
+ chSysLockFromISR();
+ if (chIQPutI(&sdp->iqueue, u->UART_RBR) < Q_OK)
+ chnAddFlagsI(sdp, SD_OVERRUN_ERROR);
+ chSysUnlockFromISR();
+ }
+ break;
+ case IIR_SRC_TX:
+ {
+ int i = LPC214x_UART_FIFO_PRELOAD;
+ do {
+ msg_t b;
+
+ chSysLockFromISR();
+ b = chOQGetI(&sdp->oqueue);
+ chSysUnlockFromISR();
+ if (b < Q_OK) {
+ u->UART_IER &= ~IER_THRE;
+ chSysLockFromISR();
+ chnAddFlagsI(sdp, CHN_OUTPUT_EMPTY);
+ chSysUnlockFromISR();
+ break;
+ }
+ u->UART_THR = b;
+ } while (--i);
+ }
+ break;
+ default:
+ (void) u->UART_THR;
+ (void) u->UART_RBR;
+ }
+ }
+}
+
+/**
+ * @brief Attempts a TX FIFO preload.
+ */
+static void preload(SerialDriver *sdp) {
+ UART *u = sdp->uart;
+
+ if (u->UART_LSR & LSR_THRE) {
+ int i = LPC214x_UART_FIFO_PRELOAD;
+ do {
+ msg_t b = chOQGetI(&sdp->oqueue);
+ if (b < Q_OK) {
+ chnAddFlagsI(sdp, CHN_OUTPUT_EMPTY);
+ return;
+ }
+ u->UART_THR = b;
+ } while (--i);
+ }
+ u->UART_IER |= IER_THRE;
+}
+
+/**
+ * @brief Driver SD1 output notification.
+ */
+#if USE_LPC214x_UART0 || defined(__DOXYGEN__)
+static void notify1(io_queue_t *qp) {
+
+ (void)qp;
+ preload(&SD1);
+}
+#endif
+
+/**
+ * @brief Driver SD2 output notification.
+ */
+#if USE_LPC214x_UART1 || defined(__DOXYGEN__)
+static void notify2(io_queue_t *qp) {
+
+ (void)qp;
+ preload(&SD2);
+}
+#endif
+
+/*===========================================================================*/
+/* Driver interrupt handlers. */
+/*===========================================================================*/
+
+/**
+ * @brief UART0 IRQ handler.
+ *
+ * @isr
+ */
+#if USE_LPC214x_UART0 || defined(__DOXYGEN__)
+CH_IRQ_HANDLER(UART0IrqHandler) {
+
+ CH_IRQ_PROLOGUE();
+
+ serve_interrupt(&SD1);
+ VICVectAddr = 0;
+
+ CH_IRQ_EPILOGUE();
+}
+#endif
+
+/**
+ * @brief UART1 IRQ handler.
+ *
+ * @isr
+ */
+#if USE_LPC214x_UART1 || defined(__DOXYGEN__)
+CH_IRQ_HANDLER(UART1IrqHandler) {
+
+ CH_IRQ_PROLOGUE();
+
+ serve_interrupt(&SD2);
+ VICVectAddr = 0;
+
+ CH_IRQ_EPILOGUE();
+}
+#endif
+
+/*===========================================================================*/
+/* Driver exported functions. */
+/*===========================================================================*/
+
+/**
+ * @brief Low level serial driver initialization.
+ *
+ * @notapi
+ */
+void sd_lld_init(void) {
+
+#if USE_LPC214x_UART0
+ sdObjectInit(&SD1, NULL, notify1);
+ SD1.uart = U0Base;
+ SetVICVector(UART0IrqHandler, LPC214x_UART0_PRIORITY, SOURCE_UART0);
+#endif
+#if USE_LPC214x_UART1
+ sdObjectInit(&SD2, NULL, notify2);
+ SD2.uart = U1Base;
+ SetVICVector(UART1IrqHandler, LPC214x_UART1_PRIORITY, SOURCE_UART1);
+#endif
+}
+
+/**
+ * @brief Low level serial driver configuration and (re)start.
+ *
+ * @param[in] sdp pointer to a @p SerialDriver object
+ * @param[in] config the architecture-dependent serial driver configuration.
+ * If this parameter is set to @p NULL then a default
+ * configuration is used.
+ *
+ * @notapi
+ */
+void sd_lld_start(SerialDriver *sdp, const SerialConfig *config) {
+
+ if (config == NULL)
+ config = &default_config;
+
+ if (sdp->state == SD_STOP) {
+#if USE_LPC214x_UART0
+ if (&SD1 == sdp) {
+ PCONP = (PCONP & PCALL) | PCUART0;
+ VICIntEnable = INTMASK(SOURCE_UART0);
+ }
+#endif
+#if USE_LPC214x_UART1
+ if (&SD2 == sdp) {
+ PCONP = (PCONP & PCALL) | PCUART1;
+ VICIntEnable = INTMASK(SOURCE_UART1);
+ }
+#endif
+ }
+ uart_init(sdp, config);
+}
+
+/**
+ * @brief Low level serial driver stop.
+ * @details De-initializes the UART, stops the associated clock, resets the
+ * interrupt vector.
+ *
+ * @param[in] sdp pointer to a @p SerialDriver object
+ *
+ * @notapi
+ */
+void sd_lld_stop(SerialDriver *sdp) {
+
+ if (sdp->state == SD_READY) {
+ uart_deinit(sdp->uart);
+#if USE_LPC214x_UART0
+ if (&SD1 == sdp) {
+ PCONP = (PCONP & PCALL) & ~PCUART0;
+ VICIntEnClear = INTMASK(SOURCE_UART0);
+ return;
+ }
+#endif
+#if USE_LPC214x_UART1
+ if (&SD2 == sdp) {
+ PCONP = (PCONP & PCALL) & ~PCUART1;
+ VICIntEnClear = INTMASK(SOURCE_UART1);
+ return;
+ }
+#endif
+ }
+}
+
+#endif /* HAL_USE_SERIAL */
+
+/** @} */
|