diff options
Diffstat (limited to 'os/hal/platforms')
64 files changed, 34563 insertions, 0 deletions
diff --git a/os/hal/platforms/STM32/GPIOv1/pal_lld.c b/os/hal/platforms/STM32/GPIOv1/pal_lld.c new file mode 100644 index 000000000..31eec7883 --- /dev/null +++ b/os/hal/platforms/STM32/GPIOv1/pal_lld.c @@ -0,0 +1,184 @@ +/*
+ ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+/**
+ * @file STM32/GPIOv1/pal_lld.c
+ * @brief STM32F1xx GPIO low level driver code.
+ *
+ * @addtogroup PAL
+ * @{
+ */
+
+#include "ch.h"
+#include "hal.h"
+
+#if HAL_USE_PAL || defined(__DOXYGEN__)
+
+/*===========================================================================*/
+/* Driver local definitions. */
+/*===========================================================================*/
+
+#if STM32_HAS_GPIOG
+#define APB2_EN_MASK (RCC_APB2ENR_IOPAEN | RCC_APB2ENR_IOPBEN | \
+ RCC_APB2ENR_IOPCEN | RCC_APB2ENR_IOPDEN | \
+ RCC_APB2ENR_IOPEEN | RCC_APB2ENR_IOPFEN | \
+ RCC_APB2ENR_IOPGEN | RCC_APB2ENR_AFIOEN)
+#elif STM32_HAS_GPIOE
+#define APB2_EN_MASK (RCC_APB2ENR_IOPAEN | RCC_APB2ENR_IOPBEN | \
+ RCC_APB2ENR_IOPCEN | RCC_APB2ENR_IOPDEN | \
+ RCC_APB2ENR_IOPEEN | RCC_APB2ENR_AFIOEN)
+#else
+#define APB2_EN_MASK (RCC_APB2ENR_IOPAEN | RCC_APB2ENR_IOPBEN | \
+ RCC_APB2ENR_IOPCEN | RCC_APB2ENR_IOPDEN | \
+ RCC_APB2ENR_AFIOEN)
+#endif
+
+/*===========================================================================*/
+/* Driver exported variables. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver local variables and types. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver local functions. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver interrupt handlers. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver exported functions. */
+/*===========================================================================*/
+
+/**
+ * @brief STM32 I/O ports configuration.
+ * @details Ports A-D(E, F, G) clocks enabled, AFIO clock enabled.
+ *
+ * @param[in] config the STM32 ports configuration
+ *
+ * @notapi
+ */
+void _pal_lld_init(const PALConfig *config) {
+
+ /*
+ * Enables the GPIO related clocks.
+ */
+ rccEnableAPB2(APB2_EN_MASK, FALSE);
+
+ /*
+ * Initial GPIO setup.
+ */
+ GPIOA->ODR = config->PAData.odr;
+ GPIOA->CRH = config->PAData.crh;
+ GPIOA->CRL = config->PAData.crl;
+ GPIOB->ODR = config->PBData.odr;
+ GPIOB->CRH = config->PBData.crh;
+ GPIOB->CRL = config->PBData.crl;
+ GPIOC->ODR = config->PCData.odr;
+ GPIOC->CRH = config->PCData.crh;
+ GPIOC->CRL = config->PCData.crl;
+ GPIOD->ODR = config->PDData.odr;
+ GPIOD->CRH = config->PDData.crh;
+ GPIOD->CRL = config->PDData.crl;
+#if STM32_HAS_GPIOE || defined(__DOXYGEN__)
+ GPIOE->ODR = config->PEData.odr;
+ GPIOE->CRH = config->PEData.crh;
+ GPIOE->CRL = config->PEData.crl;
+#if STM32_HAS_GPIOF || defined(__DOXYGEN__)
+ GPIOF->ODR = config->PFData.odr;
+ GPIOF->CRH = config->PFData.crh;
+ GPIOF->CRL = config->PFData.crl;
+#if STM32_HAS_GPIOG || defined(__DOXYGEN__)
+ GPIOG->ODR = config->PGData.odr;
+ GPIOG->CRH = config->PGData.crh;
+ GPIOG->CRL = config->PGData.crl;
+#endif
+#endif
+#endif
+}
+
+/**
+ * @brief Pads mode setup.
+ * @details This function programs a pads group belonging to the same port
+ * with the specified mode.
+ * @note @p PAL_MODE_UNCONNECTED is implemented as push pull output at 2MHz.
+ * @note Writing on pads programmed as pull-up or pull-down has the side
+ * effect to modify the resistor setting because the output latched
+ * data is used for the resistor selection.
+ *
+ * @param[in] port the port identifier
+ * @param[in] mask the group mask
+ * @param[in] mode the mode
+ *
+ * @notapi
+ */
+void _pal_lld_setgroupmode(ioportid_t port,
+ ioportmask_t mask,
+ iomode_t mode) {
+ static const uint8_t cfgtab[] = {
+ 4, /* PAL_MODE_RESET, implemented as input.*/
+ 2, /* PAL_MODE_UNCONNECTED, implemented as push pull output 2MHz.*/
+ 4, /* PAL_MODE_INPUT */
+ 8, /* PAL_MODE_INPUT_PULLUP */
+ 8, /* PAL_MODE_INPUT_PULLDOWN */
+ 0, /* PAL_MODE_INPUT_ANALOG */
+ 3, /* PAL_MODE_OUTPUT_PUSHPULL, 50MHz.*/
+ 7, /* PAL_MODE_OUTPUT_OPENDRAIN, 50MHz.*/
+ 8, /* Reserved.*/
+ 8, /* Reserved.*/
+ 8, /* Reserved.*/
+ 8, /* Reserved.*/
+ 8, /* Reserved.*/
+ 8, /* Reserved.*/
+ 8, /* Reserved.*/
+ 8, /* Reserved.*/
+ 0xB, /* PAL_MODE_STM32_ALTERNATE_PUSHPULL, 50MHz.*/
+ 0xF, /* PAL_MODE_STM32_ALTERNATE_OPENDRAIN, 50MHz.*/
+ };
+ uint32_t mh, ml, crh, crl, cfg;
+ unsigned i;
+
+ if (mode == PAL_MODE_INPUT_PULLUP)
+ port->BSRR = mask;
+ else if (mode == PAL_MODE_INPUT_PULLDOWN)
+ port->BRR = mask;
+ cfg = cfgtab[mode];
+ mh = ml = crh = crl = 0;
+ for (i = 0; i < 8; i++) {
+ ml <<= 4;
+ mh <<= 4;
+ crl <<= 4;
+ crh <<= 4;
+ if ((mask & 0x0080) == 0)
+ ml |= 0xf;
+ else
+ crl |= cfg;
+ if ((mask & 0x8000) == 0)
+ mh |= 0xf;
+ else
+ crh |= cfg;
+ mask <<= 1;
+ }
+ port->CRH = (port->CRH & mh) | crh;
+ port->CRL = (port->CRL & ml) | crl;
+}
+
+#endif /* HAL_USE_PAL */
+
+/** @} */
diff --git a/os/hal/platforms/STM32/GPIOv1/pal_lld.h b/os/hal/platforms/STM32/GPIOv1/pal_lld.h new file mode 100644 index 000000000..56255ed1a --- /dev/null +++ b/os/hal/platforms/STM32/GPIOv1/pal_lld.h @@ -0,0 +1,334 @@ +/*
+ ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+/**
+ * @file STM32/GPIOv1/pal_lld.h
+ * @brief STM32F1xx GPIO low level driver header.
+ *
+ * @addtogroup PAL
+ * @{
+ */
+
+#ifndef _PAL_LLD_H_
+#define _PAL_LLD_H_
+
+#if HAL_USE_PAL || defined(__DOXYGEN__)
+
+/*===========================================================================*/
+/* Unsupported modes and specific modes */
+/*===========================================================================*/
+
+/**
+ * @name STM32-specific I/O mode flags
+ * @{
+ */
+/**
+ * @brief STM32 specific alternate push-pull output mode.
+ */
+#define PAL_MODE_STM32_ALTERNATE_PUSHPULL 16
+
+/**
+ * @brief STM32 specific alternate open-drain output mode.
+ */
+#define PAL_MODE_STM32_ALTERNATE_OPENDRAIN 17
+/** @} */
+
+/*===========================================================================*/
+/* I/O Ports Types and constants. */
+/*===========================================================================*/
+
+/**
+ * @brief GPIO port setup info.
+ */
+typedef struct {
+ /** Initial value for ODR register.*/
+ uint32_t odr;
+ /** Initial value for CRL register.*/
+ uint32_t crl;
+ /** Initial value for CRH register.*/
+ uint32_t crh;
+} stm32_gpio_setup_t;
+
+/**
+ * @brief STM32 GPIO static initializer.
+ * @details An instance of this structure must be passed to @p palInit() at
+ * system startup time in order to initialize the digital I/O
+ * subsystem. This represents only the initial setup, specific pads
+ * or whole ports can be reprogrammed at later time.
+ */
+typedef struct {
+ /** @brief Port A setup data.*/
+ stm32_gpio_setup_t PAData;
+ /** @brief Port B setup data.*/
+ stm32_gpio_setup_t PBData;
+ /** @brief Port C setup data.*/
+ stm32_gpio_setup_t PCData;
+ /** @brief Port D setup data.*/
+ stm32_gpio_setup_t PDData;
+#if STM32_HAS_GPIOE || defined(__DOXYGEN__)
+ /** @brief Port E setup data.*/
+ stm32_gpio_setup_t PEData;
+#if STM32_HAS_GPIOF || defined(__DOXYGEN__)
+ /** @brief Port F setup data.*/
+ stm32_gpio_setup_t PFData;
+#if STM32_HAS_GPIOG || defined(__DOXYGEN__)
+ /** @brief Port G setup data.*/
+ stm32_gpio_setup_t PGData;
+#endif
+#endif
+#endif
+} PALConfig;
+
+/**
+ * @brief Width, in bits, of an I/O port.
+ */
+#define PAL_IOPORTS_WIDTH 16
+
+/**
+ * @brief Whole port mask.
+ * @details This macro specifies all the valid bits into a port.
+ */
+#define PAL_WHOLE_PORT ((ioportmask_t)0xFFFF)
+
+/**
+ * @brief Digital I/O port sized unsigned type.
+ */
+typedef uint32_t ioportmask_t;
+
+/**
+ * @brief Digital I/O modes.
+ */
+typedef uint32_t iomode_t;
+
+/**
+ * @brief Port Identifier.
+ * @details This type can be a scalar or some kind of pointer, do not make
+ * any assumption about it, use the provided macros when populating
+ * variables of this type.
+ */
+typedef GPIO_TypeDef * ioportid_t;
+
+/*===========================================================================*/
+/* I/O Ports Identifiers. */
+/* The low level driver wraps the definitions already present in the STM32 */
+/* firmware library. */
+/*===========================================================================*/
+
+/**
+ * @brief GPIO port A identifier.
+ */
+#if STM32_HAS_GPIOA || defined(__DOXYGEN__)
+#define IOPORT1 GPIOA
+#endif
+
+/**
+ * @brief GPIO port B identifier.
+ */
+#if STM32_HAS_GPIOB || defined(__DOXYGEN__)
+#define IOPORT2 GPIOB
+#endif
+
+/**
+ * @brief GPIO port C identifier.
+ */
+#if STM32_HAS_GPIOC || defined(__DOXYGEN__)
+#define IOPORT3 GPIOC
+#endif
+
+/**
+ * @brief GPIO port D identifier.
+ */
+#if STM32_HAS_GPIOD || defined(__DOXYGEN__)
+#define IOPORT4 GPIOD
+#endif
+
+/**
+ * @brief GPIO port E identifier.
+ */
+#if STM32_HAS_GPIOE || defined(__DOXYGEN__)
+#define IOPORT5 GPIOE
+#endif
+
+/**
+ * @brief GPIO port F identifier.
+ */
+#if STM32_HAS_GPIOF || defined(__DOXYGEN__)
+#define IOPORT6 GPIOF
+#endif
+
+/**
+ * @brief GPIO port G identifier.
+ */
+#if STM32_HAS_GPIOG || defined(__DOXYGEN__)
+#define IOPORT7 GPIOG
+#endif
+
+/*===========================================================================*/
+/* Implementation, some of the following macros could be implemented as */
+/* functions, if so please put them in pal_lld.c. */
+/*===========================================================================*/
+
+/**
+ * @brief GPIO ports subsystem initialization.
+ *
+ * @notapi
+ */
+#define pal_lld_init(config) _pal_lld_init(config)
+
+/**
+ * @brief Reads an I/O port.
+ * @details This function is implemented by reading the GPIO IDR register, the
+ * implementation has no side effects.
+ * @note This function is not meant to be invoked directly by the application
+ * code.
+ *
+ * @param[in] port port identifier
+ * @return The port bits.
+ *
+ * @notapi
+ */
+#define pal_lld_readport(port) ((port)->IDR)
+
+/**
+ * @brief Reads the output latch.
+ * @details This function is implemented by reading the GPIO ODR register, the
+ * implementation has no side effects.
+ * @note This function is not meant to be invoked directly by the application
+ * code.
+ *
+ * @param[in] port port identifier
+ * @return The latched logical states.
+ *
+ * @notapi
+ */
+#define pal_lld_readlatch(port) ((port)->ODR)
+
+/**
+ * @brief Writes on a I/O port.
+ * @details This function is implemented by writing the GPIO ODR register, the
+ * implementation has no side effects.
+ * @note Writing on pads programmed as pull-up or pull-down has the side
+ * effect to modify the resistor setting because the output latched
+ * data is used for the resistor selection.
+ *
+ * @param[in] port port identifier
+ * @param[in] bits bits to be written on the specified port
+ *
+ * @notapi
+ */
+#define pal_lld_writeport(port, bits) ((port)->ODR = (bits))
+
+/**
+ * @brief Sets a bits mask on a I/O port.
+ * @details This function is implemented by writing the GPIO BSRR register, the
+ * implementation has no side effects.
+ * @note Writing on pads programmed as pull-up or pull-down has the side
+ * effect to modify the resistor setting because the output latched
+ * data is used for the resistor selection.
+ *
+ * @param[in] port port identifier
+ * @param[in] bits bits to be ORed on the specified port
+ *
+ * @notapi
+ */
+#define pal_lld_setport(port, bits) ((port)->BSRR = (bits))
+
+/**
+ * @brief Clears a bits mask on a I/O port.
+ * @details This function is implemented by writing the GPIO BRR register, the
+ * implementation has no side effects.
+ * @note Writing on pads programmed as pull-up or pull-down has the side
+ * effect to modify the resistor setting because the output latched
+ * data is used for the resistor selection.
+ *
+ * @param[in] port port identifier
+ * @param[in] bits bits to be cleared on the specified port
+ *
+ * @notapi
+ */
+#define pal_lld_clearport(port, bits) ((port)->BRR = (bits))
+
+/**
+ * @brief Writes a group of bits.
+ * @details This function is implemented by writing the GPIO BSRR register, the
+ * implementation has no side effects.
+ * @note Writing on pads programmed as pull-up or pull-down has the side
+ * effect to modify the resistor setting because the output latched
+ * data is used for the resistor selection.
+ *
+ * @param[in] port port identifier
+ * @param[in] mask group mask
+ * @param[in] offset the group bit offset within the port
+ * @param[in] bits bits to be written. Values exceeding the group
+ * width are masked.
+ *
+ * @notapi
+ */
+#define pal_lld_writegroup(port, mask, offset, bits) \
+ ((port)->BSRR = ((~(bits) & (mask)) << (16 + (offset))) | \
+ (((bits) & (mask)) << (offset)))
+
+/**
+ * @brief Pads group mode setup.
+ * @details This function programs a pads group belonging to the same port
+ * with the specified mode.
+ * @note Writing on pads programmed as pull-up or pull-down has the side
+ * effect to modify the resistor setting because the output latched
+ * data is used for the resistor selection.
+ *
+ * @param[in] port port identifier
+ * @param[in] mask group mask
+ * @param[in] offset group bit offset within the port
+ * @param[in] mode group mode
+ *
+ * @notapi
+ */
+#define pal_lld_setgroupmode(port, mask, offset, mode) \
+ _pal_lld_setgroupmode(port, mask << offset, mode)
+
+/**
+ * @brief Writes a logical state on an output pad.
+ * @note Writing on pads programmed as pull-up or pull-down has the side
+ * effect to modify the resistor setting because the output latched
+ * data is used for the resistor selection.
+ *
+ * @param[in] port port identifier
+ * @param[in] pad pad number within the port
+ * @param[in] bit logical value, the value must be @p PAL_LOW or
+ * @p PAL_HIGH
+ *
+ * @notapi
+ */
+#define pal_lld_writepad(port, pad, bit) pal_lld_writegroup(port, 1, pad, bit)
+
+extern const PALConfig pal_default_config;
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+ void _pal_lld_init(const PALConfig *config);
+ void _pal_lld_setgroupmode(ioportid_t port,
+ ioportmask_t mask,
+ iomode_t mode);
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* HAL_USE_PAL */
+
+#endif /* _PAL_LLD_H_ */
+
+/** @} */
diff --git a/os/hal/platforms/STM32/GPIOv2/pal_lld.c b/os/hal/platforms/STM32/GPIOv2/pal_lld.c new file mode 100644 index 000000000..a082842bc --- /dev/null +++ b/os/hal/platforms/STM32/GPIOv2/pal_lld.c @@ -0,0 +1,238 @@ +/*
+ ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+/**
+ * @file STM32/GPIOv2/pal_lld.c
+ * @brief STM32L1xx/STM32F2xx/STM32F4xx GPIO low level driver code.
+ *
+ * @addtogroup PAL
+ * @{
+ */
+
+#include "ch.h"
+#include "hal.h"
+
+#if HAL_USE_PAL || defined(__DOXYGEN__)
+
+/*===========================================================================*/
+/* Driver local definitions. */
+/*===========================================================================*/
+
+#if defined(STM32L1XX_MD)
+#define AHB_EN_MASK (RCC_AHBENR_GPIOAEN | RCC_AHBENR_GPIOBEN | \
+ RCC_AHBENR_GPIOCEN | RCC_AHBENR_GPIODEN | \
+ RCC_AHBENR_GPIOEEN | RCC_AHBENR_GPIOHEN)
+#define AHB_LPEN_MASK AHB_EN_MASK
+#elif defined(STM32F0XX)
+#define AHB_EN_MASK (RCC_AHBENR_GPIOAEN | RCC_AHBENR_GPIOBEN | \
+ RCC_AHBENR_GPIOCEN | RCC_AHBENR_GPIODEN | \
+ RCC_AHBENR_GPIOFEN)
+#elif defined(STM32F2XX)
+#define AHB1_EN_MASK (RCC_AHB1ENR_GPIOAEN | RCC_AHB1ENR_GPIOBEN | \
+ RCC_AHB1ENR_GPIOCEN | RCC_AHB1ENR_GPIODEN | \
+ RCC_AHB1ENR_GPIOEEN | RCC_AHB1ENR_GPIOFEN | \
+ RCC_AHB1ENR_GPIOGEN | RCC_AHB1ENR_GPIOHEN | \
+ RCC_AHB1ENR_GPIOIEN)
+#define AHB1_LPEN_MASK AHB1_EN_MASK
+#elif defined(STM32F30X) || defined(STM32F37X)
+#define AHB_EN_MASK (RCC_AHBENR_GPIOAEN | RCC_AHBENR_GPIOBEN | \
+ RCC_AHBENR_GPIOCEN | RCC_AHBENR_GPIODEN | \
+ RCC_AHBENR_GPIOEEN | RCC_AHBENR_GPIOFEN)
+#elif defined(STM32F4XX)
+#define AHB1_EN_MASK (RCC_AHB1ENR_GPIOAEN | RCC_AHB1ENR_GPIOBEN | \
+ RCC_AHB1ENR_GPIOCEN | RCC_AHB1ENR_GPIODEN | \
+ RCC_AHB1ENR_GPIOEEN | RCC_AHB1ENR_GPIOFEN | \
+ RCC_AHB1ENR_GPIOGEN | RCC_AHB1ENR_GPIOHEN | \
+ RCC_AHB1ENR_GPIOIEN)
+#define AHB1_LPEN_MASK AHB1_EN_MASK
+#else
+#error "missing or unsupported platform for GPIOv2 PAL driver"
+#endif
+
+/*===========================================================================*/
+/* Driver exported variables. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver local variables and types. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver local functions. */
+/*===========================================================================*/
+
+static void initgpio(GPIO_TypeDef *gpiop, const stm32_gpio_setup_t *config) {
+
+ gpiop->OTYPER = config->otyper;
+ gpiop->OSPEEDR = config->ospeedr;
+ gpiop->PUPDR = config->pupdr;
+ gpiop->ODR = config->odr;
+ gpiop->AFRL = config->afrl;
+ gpiop->AFRH = config->afrh;
+ gpiop->MODER = config->moder;
+}
+
+/*===========================================================================*/
+/* Driver interrupt handlers. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver exported functions. */
+/*===========================================================================*/
+
+/**
+ * @brief STM32 I/O ports configuration.
+ * @details Ports A-D(E, F, G, H) clocks enabled.
+ *
+ * @param[in] config the STM32 ports configuration
+ *
+ * @notapi
+ */
+void _pal_lld_init(const PALConfig *config) {
+
+ /*
+ * Enables the GPIO related clocks.
+ */
+#if defined(STM32L1XX_MD)
+ rccEnableAHB(AHB_EN_MASK, TRUE);
+ RCC->AHBLPENR |= AHB_LPEN_MASK;
+#elif defined(STM32F0XX)
+ rccEnableAHB(AHB_EN_MASK, TRUE);
+#elif defined(STM32F30X) || defined(STM32F37X)
+ rccEnableAHB(AHB_EN_MASK, TRUE);
+#elif defined(STM32F2XX) || defined(STM32F4XX)
+ RCC->AHB1ENR |= AHB1_EN_MASK;
+ RCC->AHB1LPENR |= AHB1_LPEN_MASK;
+#endif
+
+ /*
+ * Initial GPIO setup.
+ */
+ initgpio(GPIOA, &config->PAData);
+ initgpio(GPIOB, &config->PBData);
+ initgpio(GPIOC, &config->PCData);
+ initgpio(GPIOD, &config->PDData);
+#if STM32_HAS_GPIOE
+ initgpio(GPIOE, &config->PEData);
+#endif
+#if STM32_HAS_GPIOF
+ initgpio(GPIOF, &config->PFData);
+#endif
+#if STM32_HAS_GPIOG
+ initgpio(GPIOG, &config->PGData);
+#endif
+#if STM32_HAS_GPIOH
+ initgpio(GPIOH, &config->PHData);
+#endif
+#if STM32_HAS_GPIOI
+ initgpio(GPIOI, &config->PIData);
+#endif
+}
+
+/**
+ * @brief Pads mode setup.
+ * @details This function programs a pads group belonging to the same port
+ * with the specified mode.
+ * @note @p PAL_MODE_UNCONNECTED is implemented as push pull at minimum
+ * speed.
+ *
+ * @param[in] port the port identifier
+ * @param[in] mask the group mask
+ * @param[in] mode the mode
+ *
+ * @notapi
+ */
+#if 1
+void _pal_lld_setgroupmode(ioportid_t port,
+ ioportmask_t mask,
+ iomode_t mode) {
+
+ uint32_t moder = (mode & PAL_STM32_MODE_MASK) >> 0;
+ uint32_t otyper = (mode & PAL_STM32_OTYPE_MASK) >> 2;
+ uint32_t ospeedr = (mode & PAL_STM32_OSPEED_MASK) >> 3;
+ uint32_t pupdr = (mode & PAL_STM32_PUDR_MASK) >> 5;
+ uint32_t altr = (mode & PAL_STM32_ALTERNATE_MASK) >> 7;
+ uint32_t bit = 0;
+ while (TRUE) {
+ if ((mask & 1) != 0) {
+ uint32_t altrmask, m1, m2, m4;
+
+ altrmask = altr << ((bit & 7) * 4);
+ m4 = 15 << ((bit & 7) * 4);
+ if (bit < 8)
+ port->AFRL = (port->AFRL & ~m4) | altrmask;
+ else
+ port->AFRH = (port->AFRH & ~m4) | altrmask;
+ m1 = 1 << bit;
+ port->OTYPER = (port->OTYPER & ~m1) | otyper;
+ m2 = 3 << (bit * 2);
+ port->OSPEEDR = (port->OSPEEDR & ~m2) | ospeedr;
+ port->PUPDR = (port->PUPDR & ~m2) | pupdr;
+ port->MODER = (port->MODER & ~m2) | moder;
+ }
+ mask >>= 1;
+ if (!mask)
+ return;
+ otyper <<= 1;
+ ospeedr <<= 2;
+ pupdr <<= 2;
+ moder <<= 2;
+ bit++;
+ }
+}
+#else
+void _pal_lld_setgroupmode(ioportid_t port,
+ ioportmask_t mask,
+ iomode_t mode) {
+ uint32_t afrm, moderm, pupdrm, otyperm, ospeedrm;
+ uint32_t m1 = (uint32_t)mask;
+ uint32_t m2 = 0;
+ uint32_t m4l = 0;
+ uint32_t m4h = 0;
+ uint32_t bit = 0;
+ do {
+ if ((mask & 1) != 0) {
+ m2 |= 3 << bit;
+ if (bit < 16)
+ m4l |= 15 << ((bit & 14) * 2);
+ else
+ m4h |= 15 << ((bit & 14) * 2);
+ }
+ bit += 2;
+ mask >>= 1;
+ } while (mask);
+
+ afrm = ((mode & PAL_STM32_ALTERNATE_MASK) >> 7) * 0x1111;
+ port->AFRL = (port->AFRL & ~m4l) | (afrm & m4l);
+ port->AFRH = (port->AFRH & ~m4h) | (afrm & m4h);
+
+ ospeedrm = ((mode & PAL_STM32_OSPEED_MASK) >> 3) * 0x5555;
+ port->OSPEEDR = (port->OSPEEDR & ~m2) | (ospeedrm & m2);
+
+ otyperm = ((mode & PAL_STM32_OTYPE_MASK) >> 2) * 0xffff;
+ port->OTYPER = (port->OTYPER & ~m1) | (otyperm & m1);
+
+ pupdrm = ((mode & PAL_STM32_PUDR_MASK) >> 5) * 0x5555;
+ port->PUPDR = (port->PUPDR & ~m2) | (pupdrm & m2);
+
+ moderm = ((mode & PAL_STM32_MODE_MASK) >> 0) * 0x5555;
+ port->MODER = (port->MODER & ~m2) | (moderm & m2);
+}
+#endif
+
+#endif /* HAL_USE_PAL */
+
+/** @} */
diff --git a/os/hal/platforms/STM32/GPIOv2/pal_lld.h b/os/hal/platforms/STM32/GPIOv2/pal_lld.h new file mode 100644 index 000000000..82b04c7f4 --- /dev/null +++ b/os/hal/platforms/STM32/GPIOv2/pal_lld.h @@ -0,0 +1,453 @@ +/*
+ ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+/**
+ * @file STM32/GPIOv2/pal_lld.h
+ * @brief STM32L1xx/STM32F2xx/STM32F4xx GPIO low level driver header.
+ *
+ * @addtogroup PAL
+ * @{
+ */
+
+#ifndef _PAL_LLD_H_
+#define _PAL_LLD_H_
+
+#if HAL_USE_PAL || defined(__DOXYGEN__)
+
+/*===========================================================================*/
+/* Unsupported modes and specific modes */
+/*===========================================================================*/
+
+#undef PAL_MODE_RESET
+#undef PAL_MODE_UNCONNECTED
+#undef PAL_MODE_INPUT
+#undef PAL_MODE_INPUT_PULLUP
+#undef PAL_MODE_INPUT_PULLDOWN
+#undef PAL_MODE_INPUT_ANALOG
+#undef PAL_MODE_OUTPUT_PUSHPULL
+#undef PAL_MODE_OUTPUT_OPENDRAIN
+
+/**
+ * @name STM32-specific I/O mode flags
+ * @{
+ */
+#define PAL_STM32_MODE_MASK (3 << 0)
+#define PAL_STM32_MODE_INPUT (0 << 0)
+#define PAL_STM32_MODE_OUTPUT (1 << 0)
+#define PAL_STM32_MODE_ALTERNATE (2 << 0)
+#define PAL_STM32_MODE_ANALOG (3 << 0)
+
+#define PAL_STM32_OTYPE_MASK (1 << 2)
+#define PAL_STM32_OTYPE_PUSHPULL (0 << 2)
+#define PAL_STM32_OTYPE_OPENDRAIN (1 << 2)
+
+#define PAL_STM32_OSPEED_MASK (3 << 3)
+#define PAL_STM32_OSPEED_LOWEST (0 << 3)
+#if defined(STM32F0XX) || defined(STM32F30X) || defined(STM32F37X)
+#define PAL_STM32_OSPEED_MID (1 << 3)
+#else
+#define PAL_STM32_OSPEED_MID1 (1 << 3)
+#define PAL_STM32_OSPEED_MID2 (2 << 3)
+#endif
+#define PAL_STM32_OSPEED_HIGHEST (3 << 3)
+
+#define PAL_STM32_PUDR_MASK (3 << 5)
+#define PAL_STM32_PUDR_FLOATING (0 << 5)
+#define PAL_STM32_PUDR_PULLUP (1 << 5)
+#define PAL_STM32_PUDR_PULLDOWN (2 << 5)
+
+#define PAL_STM32_ALTERNATE_MASK (15 << 7)
+#define PAL_STM32_ALTERNATE(n) ((n) << 7)
+
+/**
+ * @brief Alternate function.
+ *
+ * @param[in] n alternate function selector
+ */
+#define PAL_MODE_ALTERNATE(n) (PAL_STM32_MODE_ALTERNATE | \
+ PAL_STM32_ALTERNATE(n))
+/** @} */
+
+/**
+ * @name Standard I/O mode flags
+ * @{
+ */
+/**
+ * @brief This mode is implemented as input.
+ */
+#define PAL_MODE_RESET PAL_STM32_MODE_INPUT
+
+/**
+ * @brief This mode is implemented as input with pull-up.
+ */
+#define PAL_MODE_UNCONNECTED PAL_MODE_INPUT_PULLUP
+
+/**
+ * @brief Regular input high-Z pad.
+ */
+#define PAL_MODE_INPUT PAL_STM32_MODE_INPUT
+
+/**
+ * @brief Input pad with weak pull up resistor.
+ */
+#define PAL_MODE_INPUT_PULLUP (PAL_STM32_MODE_INPUT | \
+ PAL_STM32_PUDR_PULLUP)
+
+/**
+ * @brief Input pad with weak pull down resistor.
+ */
+#define PAL_MODE_INPUT_PULLDOWN (PAL_STM32_MODE_INPUT | \
+ PAL_STM32_PUDR_PULLDOWN)
+
+/**
+ * @brief Analog input mode.
+ */
+#define PAL_MODE_INPUT_ANALOG PAL_STM32_MODE_ANALOG
+
+/**
+ * @brief Push-pull output pad.
+ */
+#define PAL_MODE_OUTPUT_PUSHPULL (PAL_STM32_MODE_OUTPUT | \
+ PAL_STM32_OTYPE_PUSHPULL)
+
+/**
+ * @brief Open-drain output pad.
+ */
+#define PAL_MODE_OUTPUT_OPENDRAIN (PAL_STM32_MODE_OUTPUT | \
+ PAL_STM32_OTYPE_OPENDRAIN)
+/** @} */
+
+/*===========================================================================*/
+/* I/O Ports Types and constants. */
+/*===========================================================================*/
+
+/**
+ * @brief STM32 GPIO registers block.
+ */
+typedef struct {
+
+ volatile uint32_t MODER;
+ volatile uint32_t OTYPER;
+ volatile uint32_t OSPEEDR;
+ volatile uint32_t PUPDR;
+ volatile uint32_t IDR;
+ volatile uint32_t ODR;
+ volatile union {
+ uint32_t W;
+ struct {
+ uint16_t set;
+ uint16_t clear;
+ } H;
+ } BSRR;
+ volatile uint32_t LCKR;
+ volatile uint32_t AFRL;
+ volatile uint32_t AFRH;
+} GPIO_TypeDef;
+
+/**
+ * @brief GPIO port setup info.
+ */
+typedef struct {
+ /** Initial value for MODER register.*/
+ uint32_t moder;
+ /** Initial value for OTYPER register.*/
+ uint32_t otyper;
+ /** Initial value for OSPEEDR register.*/
+ uint32_t ospeedr;
+ /** Initial value for PUPDR register.*/
+ uint32_t pupdr;
+ /** Initial value for ODR register.*/
+ uint32_t odr;
+ /** Initial value for AFRL register.*/
+ uint32_t afrl;
+ /** Initial value for AFRH register.*/
+ uint32_t afrh;
+} stm32_gpio_setup_t;
+
+/**
+ * @brief STM32 GPIO static initializer.
+ * @details An instance of this structure must be passed to @p palInit() at
+ * system startup time in order to initialize the digital I/O
+ * subsystem. This represents only the initial setup, specific pads
+ * or whole ports can be reprogrammed at later time.
+ */
+typedef struct {
+ /** @brief Port A setup data.*/
+ stm32_gpio_setup_t PAData;
+ /** @brief Port B setup data.*/
+ stm32_gpio_setup_t PBData;
+ /** @brief Port C setup data.*/
+ stm32_gpio_setup_t PCData;
+ /** @brief Port D setup data.*/
+ stm32_gpio_setup_t PDData;
+#if STM32_HAS_GPIOE
+ /** @brief Port E setup data.*/
+ stm32_gpio_setup_t PEData;
+#endif
+#if STM32_HAS_GPIOF
+ /** @brief Port F setup data.*/
+ stm32_gpio_setup_t PFData;
+#endif
+#if STM32_HAS_GPIOG
+ /** @brief Port G setup data.*/
+ stm32_gpio_setup_t PGData;
+#endif
+#if STM32_HAS_GPIOH
+ /** @brief Port H setup data.*/
+ stm32_gpio_setup_t PHData;
+#endif
+#if STM32_HAS_GPIOI
+ /** @brief Port I setup data.*/
+ stm32_gpio_setup_t PIData;
+#endif
+} PALConfig;
+
+/**
+ * @brief Width, in bits, of an I/O port.
+ */
+#define PAL_IOPORTS_WIDTH 16
+
+/**
+ * @brief Whole port mask.
+ * @details This macro specifies all the valid bits into a port.
+ */
+#define PAL_WHOLE_PORT ((ioportmask_t)0xFFFF)
+
+/**
+ * @brief Digital I/O port sized unsigned type.
+ */
+typedef uint32_t ioportmask_t;
+
+/**
+ * @brief Digital I/O modes.
+ */
+typedef uint32_t iomode_t;
+
+/**
+ * @brief Port Identifier.
+ * @details This type can be a scalar or some kind of pointer, do not make
+ * any assumption about it, use the provided macros when populating
+ * variables of this type.
+ */
+typedef GPIO_TypeDef * ioportid_t;
+
+/*===========================================================================*/
+/* I/O Ports Identifiers. */
+/* The low level driver wraps the definitions already present in the STM32 */
+/* firmware library. */
+/*===========================================================================*/
+
+/**
+ * @brief GPIO port A identifier.
+ */
+#if STM32_HAS_GPIOA || defined(__DOXYGEN__)
+#define IOPORT1 GPIOA
+#endif
+
+/**
+ * @brief GPIO port B identifier.
+ */
+#if STM32_HAS_GPIOB || defined(__DOXYGEN__)
+#define IOPORT2 GPIOB
+#endif
+
+/**
+ * @brief GPIO port C identifier.
+ */
+#if STM32_HAS_GPIOC || defined(__DOXYGEN__)
+#define IOPORT3 GPIOC
+#endif
+
+/**
+ * @brief GPIO port D identifier.
+ */
+#if STM32_HAS_GPIOD || defined(__DOXYGEN__)
+#define IOPORT4 GPIOD
+#endif
+
+/**
+ * @brief GPIO port E identifier.
+ */
+#if STM32_HAS_GPIOE || defined(__DOXYGEN__)
+#define IOPORT5 GPIOE
+#endif
+
+/**
+ * @brief GPIO port F identifier.
+ */
+#if STM32_HAS_GPIOF || defined(__DOXYGEN__)
+#define IOPORT6 GPIOF
+#endif
+
+/**
+ * @brief GPIO port G identifier.
+ */
+#if STM32_HAS_GPIOG || defined(__DOXYGEN__)
+#define IOPORT7 GPIOG
+#endif
+
+/**
+ * @brief GPIO port H identifier.
+ */
+#if STM32_HAS_GPIOH || defined(__DOXYGEN__)
+#define IOPORT8 GPIOH
+#endif
+
+/**
+ * @brief GPIO port I identifier.
+ */
+#if STM32_HAS_GPIOI || defined(__DOXYGEN__)
+#define IOPORT9 GPIOI
+#endif
+
+/*===========================================================================*/
+/* Implementation, some of the following macros could be implemented as */
+/* functions, if so please put them in pal_lld.c. */
+/*===========================================================================*/
+
+/**
+ * @brief GPIO ports subsystem initialization.
+ *
+ * @notapi
+ */
+#define pal_lld_init(config) _pal_lld_init(config)
+
+/**
+ * @brief Reads an I/O port.
+ * @details This function is implemented by reading the GPIO IDR register, the
+ * implementation has no side effects.
+ * @note This function is not meant to be invoked directly by the application
+ * code.
+ *
+ * @param[in] port port identifier
+ * @return The port bits.
+ *
+ * @notapi
+ */
+#define pal_lld_readport(port) ((port)->IDR)
+
+/**
+ * @brief Reads the output latch.
+ * @details This function is implemented by reading the GPIO ODR register, the
+ * implementation has no side effects.
+ * @note This function is not meant to be invoked directly by the application
+ * code.
+ *
+ * @param[in] port port identifier
+ * @return The latched logical states.
+ *
+ * @notapi
+ */
+#define pal_lld_readlatch(port) ((port)->ODR)
+
+/**
+ * @brief Writes on a I/O port.
+ * @details This function is implemented by writing the GPIO ODR register, the
+ * implementation has no side effects.
+ *
+ * @param[in] port port identifier
+ * @param[in] bits bits to be written on the specified port
+ *
+ * @notapi
+ */
+#define pal_lld_writeport(port, bits) ((port)->ODR = (bits))
+
+/**
+ * @brief Sets a bits mask on a I/O port.
+ * @details This function is implemented by writing the GPIO BSRR register, the
+ * implementation has no side effects.
+ *
+ * @param[in] port port identifier
+ * @param[in] bits bits to be ORed on the specified port
+ *
+ * @notapi
+ */
+#define pal_lld_setport(port, bits) ((port)->BSRR.H.set = (uint16_t)(bits))
+
+/**
+ * @brief Clears a bits mask on a I/O port.
+ * @details This function is implemented by writing the GPIO BSRR register, the
+ * implementation has no side effects.
+ *
+ * @param[in] port port identifier
+ * @param[in] bits bits to be cleared on the specified port
+ *
+ * @notapi
+ */
+#define pal_lld_clearport(port, bits) ((port)->BSRR.H.clear = (uint16_t)(bits))
+
+/**
+ * @brief Writes a group of bits.
+ * @details This function is implemented by writing the GPIO BSRR register, the
+ * implementation has no side effects.
+ *
+ * @param[in] port port identifier
+ * @param[in] mask group mask
+ * @param[in] offset the group bit offset within the port
+ * @param[in] bits bits to be written. Values exceeding the group
+ * width are masked.
+ *
+ * @notapi
+ */
+#define pal_lld_writegroup(port, mask, offset, bits) \
+ ((port)->BSRR.W = ((~(bits) & (mask)) << (16 + (offset))) | \
+ (((bits) & (mask)) << (offset)))
+
+/**
+ * @brief Pads group mode setup.
+ * @details This function programs a pads group belonging to the same port
+ * with the specified mode.
+ *
+ * @param[in] port port identifier
+ * @param[in] mask group mask
+ * @param[in] offset group bit offset within the port
+ * @param[in] mode group mode
+ *
+ * @notapi
+ */
+#define pal_lld_setgroupmode(port, mask, offset, mode) \
+ _pal_lld_setgroupmode(port, mask << offset, mode)
+
+/**
+ * @brief Writes a logical state on an output pad.
+ *
+ * @param[in] port port identifier
+ * @param[in] pad pad number within the port
+ * @param[in] bit logical value, the value must be @p PAL_LOW or
+ * @p PAL_HIGH
+ *
+ * @notapi
+ */
+#define pal_lld_writepad(port, pad, bit) pal_lld_writegroup(port, 1, pad, bit)
+
+extern const PALConfig pal_default_config;
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+ void _pal_lld_init(const PALConfig *config);
+ void _pal_lld_setgroupmode(ioportid_t port,
+ ioportmask_t mask,
+ iomode_t mode);
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* HAL_USE_PAL */
+
+#endif /* _PAL_LLD_H_ */
+
+/** @} */
diff --git a/os/hal/platforms/STM32/I2Cv1/i2c_lld.c b/os/hal/platforms/STM32/I2Cv1/i2c_lld.c new file mode 100644 index 000000000..ba5d0a140 --- /dev/null +++ b/os/hal/platforms/STM32/I2Cv1/i2c_lld.c @@ -0,0 +1,902 @@ +/*
+ ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+/*
+ Concepts and parts of this file have been contributed by Uladzimir Pylinsky
+ aka barthess.
+ */
+
+/**
+ * @file STM32/I2Cv1/i2c_lld.c
+ * @brief STM32 I2C subsystem low level driver source.
+ *
+ * @addtogroup I2C
+ * @{
+ */
+
+#include "ch.h"
+#include "hal.h"
+
+#if HAL_USE_I2C || defined(__DOXYGEN__)
+
+/*===========================================================================*/
+/* Driver local definitions. */
+/*===========================================================================*/
+
+#define I2C1_RX_DMA_CHANNEL \
+ STM32_DMA_GETCHANNEL(STM32_I2C_I2C1_RX_DMA_STREAM, \
+ STM32_I2C1_RX_DMA_CHN)
+
+#define I2C1_TX_DMA_CHANNEL \
+ STM32_DMA_GETCHANNEL(STM32_I2C_I2C1_TX_DMA_STREAM, \
+ STM32_I2C1_TX_DMA_CHN)
+
+#define I2C2_RX_DMA_CHANNEL \
+ STM32_DMA_GETCHANNEL(STM32_I2C_I2C2_RX_DMA_STREAM, \
+ STM32_I2C2_RX_DMA_CHN)
+
+#define I2C2_TX_DMA_CHANNEL \
+ STM32_DMA_GETCHANNEL(STM32_I2C_I2C2_TX_DMA_STREAM, \
+ STM32_I2C2_TX_DMA_CHN)
+
+#define I2C3_RX_DMA_CHANNEL \
+ STM32_DMA_GETCHANNEL(STM32_I2C_I2C3_RX_DMA_STREAM, \
+ STM32_I2C3_RX_DMA_CHN)
+
+#define I2C3_TX_DMA_CHANNEL \
+ STM32_DMA_GETCHANNEL(STM32_I2C_I2C3_TX_DMA_STREAM, \
+ STM32_I2C3_TX_DMA_CHN)
+
+/*===========================================================================*/
+/* Driver constants. */
+/*===========================================================================*/
+
+#define I2C_EV5_MASTER_MODE_SELECT \
+ ((uint32_t)(((I2C_SR2_MSL | I2C_SR2_BUSY) << 16) | I2C_SR1_SB))
+
+#define I2C_EV6_MASTER_TRA_MODE_SELECTED \
+ ((uint32_t)(((I2C_SR2_MSL | I2C_SR2_BUSY | I2C_SR2_TRA) << 16) | \
+ I2C_SR1_ADDR | I2C_SR1_TXE))
+
+#define I2C_EV6_MASTER_REC_MODE_SELECTED \
+ ((uint32_t)(((I2C_SR2_MSL | I2C_SR2_BUSY)<< 16) | I2C_SR1_ADDR))
+
+#define I2C_EV8_2_MASTER_BYTE_TRANSMITTED \
+ ((uint32_t)(((I2C_SR2_MSL | I2C_SR2_BUSY | I2C_SR2_TRA) << 16) | \
+ I2C_SR1_BTF | I2C_SR1_TXE))
+
+#define I2C_EV_MASK 0x00FFFFFF
+
+#define I2C_ERROR_MASK \
+ ((uint16_t)(I2C_SR1_BERR | I2C_SR1_ARLO | I2C_SR1_AF | I2C_SR1_OVR | \
+ I2C_SR1_PECERR | I2C_SR1_TIMEOUT | I2C_SR1_SMBALERT))
+
+/*===========================================================================*/
+/* Driver exported variables. */
+/*===========================================================================*/
+
+/** @brief I2C1 driver identifier.*/
+#if STM32_I2C_USE_I2C1 || defined(__DOXYGEN__)
+I2CDriver I2CD1;
+#endif
+
+/** @brief I2C2 driver identifier.*/
+#if STM32_I2C_USE_I2C2 || defined(__DOXYGEN__)
+I2CDriver I2CD2;
+#endif
+
+/** @brief I2C3 driver identifier.*/
+#if STM32_I2C_USE_I2C3 || defined(__DOXYGEN__)
+I2CDriver I2CD3;
+#endif
+
+/*===========================================================================*/
+/* Driver local variables and types. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver local functions. */
+/*===========================================================================*/
+
+/**
+ * @brief Wakes up the waiting thread.
+ *
+ * @param[in] i2cp pointer to the @p I2CDriver object
+ * @param[in] msg wakeup message
+ *
+ * @notapi
+ */
+#define wakeup_isr(i2cp, msg) { \
+ chSysLockFromIsr(); \
+ if ((i2cp)->thread != NULL) { \
+ Thread *tp = (i2cp)->thread; \
+ (i2cp)->thread = NULL; \
+ tp->p_u.rdymsg = (msg); \
+ chSchReadyI(tp); \
+ } \
+ chSysUnlockFromIsr(); \
+}
+
+/**
+ * @brief Aborts an I2C transaction.
+ *
+ * @param[in] i2cp pointer to the @p I2CDriver object
+ *
+ * @notapi
+ */
+static void i2c_lld_abort_operation(I2CDriver *i2cp) {
+ I2C_TypeDef *dp = i2cp->i2c;
+
+ /* Stops the I2C peripheral.*/
+ dp->CR1 = I2C_CR1_SWRST;
+ dp->CR1 = 0;
+ dp->CR2 = 0;
+ dp->SR1 = 0;
+
+ /* Stops the associated DMA streams.*/
+ dmaStreamDisable(i2cp->dmatx);
+ dmaStreamDisable(i2cp->dmarx);
+}
+
+/**
+ * @brief Handling of stalled I2C transactions.
+ *
+ * @param[in] i2cp pointer to the @p I2CDriver object
+ *
+ * @notapi
+ */
+static void i2c_lld_safety_timeout(void *p) {
+ I2CDriver *i2cp = (I2CDriver *)p;
+
+ chSysLockFromIsr();
+ if (i2cp->thread) {
+ Thread *tp = i2cp->thread;
+ i2c_lld_abort_operation(i2cp);
+ i2cp->thread = NULL;
+ tp->p_u.rdymsg = RDY_TIMEOUT;
+ chSchReadyI(tp);
+ }
+ chSysUnlockFromIsr();
+}
+
+/**
+ * @brief Set clock speed.
+ *
+ * @param[in] i2cp pointer to the @p I2CDriver object
+ *
+ * @notapi
+ */
+static void i2c_lld_set_clock(I2CDriver *i2cp) {
+ I2C_TypeDef *dp = i2cp->i2c;
+ uint16_t regCCR, clock_div;
+ int32_t clock_speed = i2cp->config->clock_speed;
+ i2cdutycycle_t duty = i2cp->config->duty_cycle;
+
+ chDbgCheck((i2cp != NULL) && (clock_speed > 0) && (clock_speed <= 4000000),
+ "i2c_lld_set_clock");
+
+ /* CR2 Configuration.*/
+ dp->CR2 &= (uint16_t)~I2C_CR2_FREQ;
+ dp->CR2 |= (uint16_t)I2C_CLK_FREQ;
+
+ /* CCR Configuration.*/
+ regCCR = 0;
+ clock_div = I2C_CCR_CCR;
+
+ if (clock_speed <= 100000) {
+ /* Configure clock_div in standard mode.*/
+ chDbgAssert(duty == STD_DUTY_CYCLE,
+ "i2c_lld_set_clock(), #1",
+ "Invalid standard mode duty cycle");
+
+ /* Standard mode clock_div calculate: Tlow/Thigh = 1/1.*/
+ chDbgAssert((STM32_PCLK1 % (clock_speed * 2)) == 0,
+ "i2c_lld_set_clock(), #2",
+ "PCLK1 must be divided without remainder");
+ clock_div = (uint16_t)(STM32_PCLK1 / (clock_speed * 2));
+
+ chDbgAssert(clock_div >= 0x04,
+ "i2c_lld_set_clock(), #3",
+ "Clock divider less then 0x04 not allowed");
+ regCCR |= (clock_div & I2C_CCR_CCR);
+
+ /* Sets the Maximum Rise Time for standard mode.*/
+ dp->TRISE = I2C_CLK_FREQ + 1;
+ }
+ else if (clock_speed <= 400000) {
+ /* Configure clock_div in fast mode.*/
+ chDbgAssert((duty == FAST_DUTY_CYCLE_2) || (duty == FAST_DUTY_CYCLE_16_9),
+ "i2c_lld_set_clock(), #4",
+ "Invalid fast mode duty cycle");
+
+ if (duty == FAST_DUTY_CYCLE_2) {
+ /* Fast mode clock_div calculate: Tlow/Thigh = 2/1.*/
+ chDbgAssert((STM32_PCLK1 % (clock_speed * 3)) == 0,
+ "i2c_lld_set_clock(), #5",
+ "PCLK1 must be divided without remainder");
+ clock_div = (uint16_t)(STM32_PCLK1 / (clock_speed * 3));
+ }
+ else if (duty == FAST_DUTY_CYCLE_16_9) {
+ /* Fast mode clock_div calculate: Tlow/Thigh = 16/9.*/
+ chDbgAssert((STM32_PCLK1 % (clock_speed * 25)) == 0,
+ "i2c_lld_set_clock(), #6",
+ "PCLK1 must be divided without remainder");
+ clock_div = (uint16_t)(STM32_PCLK1 / (clock_speed * 25));
+ regCCR |= I2C_CCR_DUTY;
+ }
+
+ chDbgAssert(clock_div >= 0x01,
+ "i2c_lld_set_clock(), #7",
+ "Clock divider less then 0x04 not allowed");
+ regCCR |= (I2C_CCR_FS | (clock_div & I2C_CCR_CCR));
+
+ /* Sets the Maximum Rise Time for fast mode.*/
+ dp->TRISE = (I2C_CLK_FREQ * 300 / 1000) + 1;
+ }
+
+ chDbgAssert((clock_div <= I2C_CCR_CCR),
+ "i2c_lld_set_clock(), #8", "the selected clock is too low");
+
+ dp->CCR = regCCR;
+}
+
+/**
+ * @brief Set operation mode of I2C hardware.
+ *
+ * @param[in] i2cp pointer to the @p I2CDriver object
+ *
+ * @notapi
+ */
+static void i2c_lld_set_opmode(I2CDriver *i2cp) {
+ I2C_TypeDef *dp = i2cp->i2c;
+ i2copmode_t opmode = i2cp->config->op_mode;
+ uint16_t regCR1;
+
+ regCR1 = dp->CR1;
+ switch (opmode) {
+ case OPMODE_I2C:
+ regCR1 &= (uint16_t)~(I2C_CR1_SMBUS|I2C_CR1_SMBTYPE);
+ break;
+ case OPMODE_SMBUS_DEVICE:
+ regCR1 |= I2C_CR1_SMBUS;
+ regCR1 &= (uint16_t)~(I2C_CR1_SMBTYPE);
+ break;
+ case OPMODE_SMBUS_HOST:
+ regCR1 |= (I2C_CR1_SMBUS|I2C_CR1_SMBTYPE);
+ break;
+ }
+ dp->CR1 = regCR1;
+}
+
+/**
+ * @brief I2C shared ISR code.
+ *
+ * @param[in] i2cp pointer to the @p I2CDriver object
+ *
+ * @notapi
+ */
+static void i2c_lld_serve_event_interrupt(I2CDriver *i2cp) {
+ I2C_TypeDef *dp = i2cp->i2c;
+ uint32_t regSR2 = dp->SR2;
+ uint32_t event = dp->SR1;
+
+ /* Interrupts are disabled just before dmaStreamEnable() because there
+ is no need of interrupts until next transaction begin. All the work is
+ done by the DMA.*/
+ switch (I2C_EV_MASK & (event | (regSR2 << 16))) {
+ case I2C_EV5_MASTER_MODE_SELECT:
+ dp->DR = i2cp->addr;
+ break;
+ case I2C_EV6_MASTER_REC_MODE_SELECTED:
+ dp->CR2 &= ~I2C_CR2_ITEVTEN;
+ dmaStreamEnable(i2cp->dmarx);
+ dp->CR2 |= I2C_CR2_LAST; /* Needed in receiver mode. */
+ if (dmaStreamGetTransactionSize(i2cp->dmarx) < 2)
+ dp->CR1 &= ~I2C_CR1_ACK;
+ break;
+ case I2C_EV6_MASTER_TRA_MODE_SELECTED:
+ dp->CR2 &= ~I2C_CR2_ITEVTEN;
+ dmaStreamEnable(i2cp->dmatx);
+ break;
+ case I2C_EV8_2_MASTER_BYTE_TRANSMITTED:
+ /* Catches BTF event after the end of transmission.*/
+ if (dmaStreamGetTransactionSize(i2cp->dmarx) > 0) {
+ /* Starts "read after write" operation, LSB = 1 -> receive.*/
+ i2cp->addr |= 0x01;
+ dp->CR1 |= I2C_CR1_START | I2C_CR1_ACK;
+ return;
+ }
+ dp->CR2 &= ~I2C_CR2_ITEVTEN;
+ dp->CR1 |= I2C_CR1_STOP;
+ wakeup_isr(i2cp, RDY_OK);
+ break;
+ default:
+ break;
+ }
+ /* Clear ADDR flag. */
+ if (event & (I2C_SR1_ADDR | I2C_SR1_ADD10))
+ (void)dp->SR2;
+}
+
+/**
+ * @brief DMA RX end IRQ handler.
+ *
+ * @param[in] i2cp pointer to the @p I2CDriver object
+ * @param[in] flags pre-shifted content of the ISR register
+ *
+ * @notapi
+ */
+static void i2c_lld_serve_rx_end_irq(I2CDriver *i2cp, uint32_t flags) {
+ I2C_TypeDef *dp = i2cp->i2c;
+
+ /* DMA errors handling.*/
+#if defined(STM32_I2C_DMA_ERROR_HOOK)
+ if ((flags & (STM32_DMA_ISR_TEIF | STM32_DMA_ISR_DMEIF)) != 0) {
+ STM32_I2C_DMA_ERROR_HOOK(i2cp);
+ }
+#else
+ (void)flags;
+#endif
+
+ dmaStreamDisable(i2cp->dmarx);
+
+ dp->CR2 &= ~I2C_CR2_LAST;
+ dp->CR1 &= ~I2C_CR1_ACK;
+ dp->CR1 |= I2C_CR1_STOP;
+ wakeup_isr(i2cp, RDY_OK);
+}
+
+/**
+ * @brief DMA TX end IRQ handler.
+ *
+ * @param[in] i2cp pointer to the @p I2CDriver object
+ *
+ * @notapi
+ */
+static void i2c_lld_serve_tx_end_irq(I2CDriver *i2cp, uint32_t flags) {
+ I2C_TypeDef *dp = i2cp->i2c;
+
+ /* DMA errors handling.*/
+#if defined(STM32_I2C_DMA_ERROR_HOOK)
+ if ((flags & (STM32_DMA_ISR_TEIF | STM32_DMA_ISR_DMEIF)) != 0) {
+ STM32_I2C_DMA_ERROR_HOOK(i2cp);
+ }
+#else
+ (void)flags;
+#endif
+
+ dmaStreamDisable(i2cp->dmatx);
+ /* Enables interrupts to catch BTF event meaning transmission part complete.
+ Interrupt handler will decide to generate STOP or to begin receiving part
+ of R/W transaction itself.*/
+ dp->CR2 |= I2C_CR2_ITEVTEN;
+}
+
+/**
+ * @brief I2C error handler.
+ *
+ * @param[in] i2cp pointer to the @p I2CDriver object
+ * @param[in] sr content of the SR1 register to be decoded
+ *
+ * @notapi
+ */
+static void i2c_lld_serve_error_interrupt(I2CDriver *i2cp, uint16_t sr) {
+
+ /* Clears interrupt flags just to be safe.*/
+ dmaStreamDisable(i2cp->dmatx);
+ dmaStreamDisable(i2cp->dmarx);
+
+ i2cp->errors = I2CD_NO_ERROR;
+
+ if (sr & I2C_SR1_BERR) /* Bus error. */
+ i2cp->errors |= I2CD_BUS_ERROR;
+
+ if (sr & I2C_SR1_ARLO) /* Arbitration lost. */
+ i2cp->errors |= I2CD_ARBITRATION_LOST;
+
+ if (sr & I2C_SR1_AF) { /* Acknowledge fail. */
+ i2cp->i2c->CR2 &= ~I2C_CR2_ITEVTEN;
+ i2cp->i2c->CR1 |= I2C_CR1_STOP; /* Setting stop bit. */
+ i2cp->errors |= I2CD_ACK_FAILURE;
+ }
+
+ if (sr & I2C_SR1_OVR) /* Overrun. */
+ i2cp->errors |= I2CD_OVERRUN;
+
+ if (sr & I2C_SR1_TIMEOUT) /* SMBus Timeout. */
+ i2cp->errors |= I2CD_TIMEOUT;
+
+ if (sr & I2C_SR1_PECERR) /* PEC error. */
+ i2cp->errors |= I2CD_PEC_ERROR;
+
+ if (sr & I2C_SR1_SMBALERT) /* SMBus alert. */
+ i2cp->errors |= I2CD_SMB_ALERT;
+
+ /* If some error has been identified then sends wakes the waiting thread.*/
+ if (i2cp->errors != I2CD_NO_ERROR)
+ wakeup_isr(i2cp, RDY_RESET);
+}
+
+/*===========================================================================*/
+/* Driver interrupt handlers. */
+/*===========================================================================*/
+
+#if STM32_I2C_USE_I2C1 || defined(__DOXYGEN__)
+/**
+ * @brief I2C1 event interrupt handler.
+ *
+ * @notapi
+ */
+CH_IRQ_HANDLER(I2C1_EV_IRQHandler) {
+
+ CH_IRQ_PROLOGUE();
+
+ i2c_lld_serve_event_interrupt(&I2CD1);
+
+ CH_IRQ_EPILOGUE();
+}
+
+/**
+ * @brief I2C1 error interrupt handler.
+ */
+CH_IRQ_HANDLER(I2C1_ER_IRQHandler) {
+ uint16_t sr = I2CD1.i2c->SR1;
+
+ CH_IRQ_PROLOGUE();
+
+ I2CD1.i2c->SR1 = ~(sr & I2C_ERROR_MASK);
+ i2c_lld_serve_error_interrupt(&I2CD1, sr);
+
+ CH_IRQ_EPILOGUE();
+}
+#endif /* STM32_I2C_USE_I2C1 */
+
+#if STM32_I2C_USE_I2C2 || defined(__DOXYGEN__)
+/**
+ * @brief I2C2 event interrupt handler.
+ *
+ * @notapi
+ */
+CH_IRQ_HANDLER(I2C2_EV_IRQHandler) {
+
+ CH_IRQ_PROLOGUE();
+
+ i2c_lld_serve_event_interrupt(&I2CD2);
+
+ CH_IRQ_EPILOGUE();
+}
+
+/**
+ * @brief I2C2 error interrupt handler.
+ *
+ * @notapi
+ */
+CH_IRQ_HANDLER(I2C2_ER_IRQHandler) {
+ uint16_t sr = I2CD2.i2c->SR1;
+
+ CH_IRQ_PROLOGUE();
+
+ I2CD2.i2c->SR1 = ~(sr & I2C_ERROR_MASK);
+ i2c_lld_serve_error_interrupt(&I2CD2, sr);
+
+ CH_IRQ_EPILOGUE();
+}
+#endif /* STM32_I2C_USE_I2C2 */
+
+#if STM32_I2C_USE_I2C3 || defined(__DOXYGEN__)
+/**
+ * @brief I2C3 event interrupt handler.
+ *
+ * @notapi
+ */
+CH_IRQ_HANDLER(I2C3_EV_IRQHandler) {
+
+ CH_IRQ_PROLOGUE();
+
+ i2c_lld_serve_event_interrupt(&I2CD3);
+
+ CH_IRQ_EPILOGUE();
+}
+
+/**
+ * @brief I2C3 error interrupt handler.
+ *
+ * @notapi
+ */
+CH_IRQ_HANDLER(I2C3_ER_IRQHandler) {
+ uint16_t sr = I2CD3.i2c->SR1;
+
+ CH_IRQ_PROLOGUE();
+
+ I2CD3.i2c->SR1 = ~(sr & I2C_ERROR_MASK);
+ i2c_lld_serve_error_interrupt(&I2CD3, sr);
+
+ CH_IRQ_EPILOGUE();
+}
+#endif /* STM32_I2C_USE_I2C3 */
+
+/*===========================================================================*/
+/* Driver exported functions. */
+/*===========================================================================*/
+
+/**
+ * @brief Low level I2C driver initialization.
+ *
+ * @notapi
+ */
+void i2c_lld_init(void) {
+
+#if STM32_I2C_USE_I2C1
+ i2cObjectInit(&I2CD1);
+ I2CD1.thread = NULL;
+ I2CD1.i2c = I2C1;
+ I2CD1.dmarx = STM32_DMA_STREAM(STM32_I2C_I2C1_RX_DMA_STREAM);
+ I2CD1.dmatx = STM32_DMA_STREAM(STM32_I2C_I2C1_TX_DMA_STREAM);
+#endif /* STM32_I2C_USE_I2C1 */
+
+#if STM32_I2C_USE_I2C2
+ i2cObjectInit(&I2CD2);
+ I2CD2.thread = NULL;
+ I2CD2.i2c = I2C2;
+ I2CD2.dmarx = STM32_DMA_STREAM(STM32_I2C_I2C2_RX_DMA_STREAM);
+ I2CD2.dmatx = STM32_DMA_STREAM(STM32_I2C_I2C2_TX_DMA_STREAM);
+#endif /* STM32_I2C_USE_I2C2 */
+
+#if STM32_I2C_USE_I2C3
+ i2cObjectInit(&I2CD3);
+ I2CD3.thread = NULL;
+ I2CD3.i2c = I2C3;
+ I2CD3.dmarx = STM32_DMA_STREAM(STM32_I2C_I2C3_RX_DMA_STREAM);
+ I2CD3.dmatx = STM32_DMA_STREAM(STM32_I2C_I2C3_TX_DMA_STREAM);
+#endif /* STM32_I2C_USE_I2C3 */
+}
+
+/**
+ * @brief Configures and activates the I2C peripheral.
+ *
+ * @param[in] i2cp pointer to the @p I2CDriver object
+ *
+ * @notapi
+ */
+void i2c_lld_start(I2CDriver *i2cp) {
+ I2C_TypeDef *dp = i2cp->i2c;
+
+ i2cp->txdmamode = STM32_DMA_CR_PSIZE_BYTE | STM32_DMA_CR_MSIZE_BYTE |
+ STM32_DMA_CR_MINC | STM32_DMA_CR_DMEIE |
+ STM32_DMA_CR_TEIE | STM32_DMA_CR_TCIE |
+ STM32_DMA_CR_DIR_M2P;
+ i2cp->rxdmamode = STM32_DMA_CR_PSIZE_BYTE | STM32_DMA_CR_MSIZE_BYTE |
+ STM32_DMA_CR_MINC | STM32_DMA_CR_DMEIE |
+ STM32_DMA_CR_TEIE | STM32_DMA_CR_TCIE |
+ STM32_DMA_CR_DIR_P2M;
+
+ /* If in stopped state then enables the I2C and DMA clocks.*/
+ if (i2cp->state == I2C_STOP) {
+
+#if STM32_I2C_USE_I2C1
+ if (&I2CD1 == i2cp) {
+ bool_t b;
+
+ rccResetI2C1();
+ b = dmaStreamAllocate(i2cp->dmarx,
+ STM32_I2C_I2C1_IRQ_PRIORITY,
+ (stm32_dmaisr_t)i2c_lld_serve_rx_end_irq,
+ (void *)i2cp);
+ chDbgAssert(!b, "i2c_lld_start(), #1", "stream already allocated");
+ b = dmaStreamAllocate(i2cp->dmatx,
+ STM32_I2C_I2C1_IRQ_PRIORITY,
+ (stm32_dmaisr_t)i2c_lld_serve_tx_end_irq,
+ (void *)i2cp);
+ chDbgAssert(!b, "i2c_lld_start(), #2", "stream already allocated");
+ rccEnableI2C1(FALSE);
+ nvicEnableVector(I2C1_EV_IRQn,
+ CORTEX_PRIORITY_MASK(STM32_I2C_I2C1_IRQ_PRIORITY));
+ nvicEnableVector(I2C1_ER_IRQn,
+ CORTEX_PRIORITY_MASK(STM32_I2C_I2C1_IRQ_PRIORITY));
+
+ i2cp->rxdmamode |= STM32_DMA_CR_CHSEL(I2C1_RX_DMA_CHANNEL) |
+ STM32_DMA_CR_PL(STM32_I2C_I2C1_DMA_PRIORITY);
+ i2cp->txdmamode |= STM32_DMA_CR_CHSEL(I2C1_TX_DMA_CHANNEL) |
+ STM32_DMA_CR_PL(STM32_I2C_I2C1_DMA_PRIORITY);
+ }
+#endif /* STM32_I2C_USE_I2C1 */
+
+#if STM32_I2C_USE_I2C2
+ if (&I2CD2 == i2cp) {
+ bool_t b;
+
+ rccResetI2C2();
+ b = dmaStreamAllocate(i2cp->dmarx,
+ STM32_I2C_I2C2_IRQ_PRIORITY,
+ (stm32_dmaisr_t)i2c_lld_serve_rx_end_irq,
+ (void *)i2cp);
+ chDbgAssert(!b, "i2c_lld_start(), #3", "stream already allocated");
+ b = dmaStreamAllocate(i2cp->dmatx,
+ STM32_I2C_I2C2_IRQ_PRIORITY,
+ (stm32_dmaisr_t)i2c_lld_serve_tx_end_irq,
+ (void *)i2cp);
+ chDbgAssert(!b, "i2c_lld_start(), #4", "stream already allocated");
+ rccEnableI2C2(FALSE);
+ nvicEnableVector(I2C2_EV_IRQn,
+ CORTEX_PRIORITY_MASK(STM32_I2C_I2C2_IRQ_PRIORITY));
+ nvicEnableVector(I2C2_ER_IRQn,
+ CORTEX_PRIORITY_MASK(STM32_I2C_I2C2_IRQ_PRIORITY));
+
+ i2cp->rxdmamode |= STM32_DMA_CR_CHSEL(I2C2_RX_DMA_CHANNEL) |
+ STM32_DMA_CR_PL(STM32_I2C_I2C2_DMA_PRIORITY);
+ i2cp->txdmamode |= STM32_DMA_CR_CHSEL(I2C2_TX_DMA_CHANNEL) |
+ STM32_DMA_CR_PL(STM32_I2C_I2C2_DMA_PRIORITY);
+ }
+#endif /* STM32_I2C_USE_I2C2 */
+
+#if STM32_I2C_USE_I2C3
+ if (&I2CD3 == i2cp) {
+ bool_t b;
+
+ rccResetI2C3();
+ b = dmaStreamAllocate(i2cp->dmarx,
+ STM32_I2C_I2C3_IRQ_PRIORITY,
+ (stm32_dmaisr_t)i2c_lld_serve_rx_end_irq,
+ (void *)i2cp);
+ chDbgAssert(!b, "i2c_lld_start(), #5", "stream already allocated");
+ b = dmaStreamAllocate(i2cp->dmatx,
+ STM32_I2C_I2C3_IRQ_PRIORITY,
+ (stm32_dmaisr_t)i2c_lld_serve_tx_end_irq,
+ (void *)i2cp);
+ chDbgAssert(!b, "i2c_lld_start(), #6", "stream already allocated");
+ rccEnableI2C3(FALSE);
+ nvicEnableVector(I2C3_EV_IRQn,
+ CORTEX_PRIORITY_MASK(STM32_I2C_I2C3_IRQ_PRIORITY));
+ nvicEnableVector(I2C3_ER_IRQn,
+ CORTEX_PRIORITY_MASK(STM32_I2C_I2C3_IRQ_PRIORITY));
+
+ i2cp->rxdmamode |= STM32_DMA_CR_CHSEL(I2C3_RX_DMA_CHANNEL) |
+ STM32_DMA_CR_PL(STM32_I2C_I2C3_DMA_PRIORITY);
+ i2cp->txdmamode |= STM32_DMA_CR_CHSEL(I2C3_TX_DMA_CHANNEL) |
+ STM32_DMA_CR_PL(STM32_I2C_I2C3_DMA_PRIORITY);
+ }
+#endif /* STM32_I2C_USE_I2C3 */
+ }
+
+ /* I2C registers pointed by the DMA.*/
+ dmaStreamSetPeripheral(i2cp->dmarx, &dp->DR);
+ dmaStreamSetPeripheral(i2cp->dmatx, &dp->DR);
+
+ /* Reset i2c peripheral.*/
+ dp->CR1 = I2C_CR1_SWRST;
+ dp->CR1 = 0;
+ dp->CR2 = I2C_CR2_ITERREN | I2C_CR2_DMAEN;
+
+ /* Setup I2C parameters.*/
+ i2c_lld_set_clock(i2cp);
+ i2c_lld_set_opmode(i2cp);
+
+ /* Ready to go.*/
+ dp->CR1 |= I2C_CR1_PE;
+}
+
+/**
+ * @brief Deactivates the I2C peripheral.
+ *
+ * @param[in] i2cp pointer to the @p I2CDriver object
+ *
+ * @notapi
+ */
+void i2c_lld_stop(I2CDriver *i2cp) {
+
+ /* If not in stopped state then disables the I2C clock.*/
+ if (i2cp->state != I2C_STOP) {
+
+ /* I2C disable.*/
+ i2c_lld_abort_operation(i2cp);
+ dmaStreamRelease(i2cp->dmatx);
+ dmaStreamRelease(i2cp->dmarx);
+
+#if STM32_I2C_USE_I2C1
+ if (&I2CD1 == i2cp) {
+ nvicDisableVector(I2C1_EV_IRQn);
+ nvicDisableVector(I2C1_ER_IRQn);
+ rccDisableI2C1(FALSE);
+ }
+#endif
+
+#if STM32_I2C_USE_I2C2
+ if (&I2CD2 == i2cp) {
+ nvicDisableVector(I2C2_EV_IRQn);
+ nvicDisableVector(I2C2_ER_IRQn);
+ rccDisableI2C2(FALSE);
+ }
+#endif
+
+#if STM32_I2C_USE_I2C3
+ if (&I2CD3 == i2cp) {
+ nvicDisableVector(I2C3_EV_IRQn);
+ nvicDisableVector(I2C3_ER_IRQn);
+ rccDisableI2C3(FALSE);
+ }
+#endif
+ }
+}
+
+/**
+ * @brief Receives data via the I2C bus as master.
+ * @details Number of receiving bytes must be more than 1 on STM32F1x. This is
+ * hardware restriction.
+ *
+ * @param[in] i2cp pointer to the @p I2CDriver object
+ * @param[in] addr slave device address
+ * @param[out] rxbuf pointer to the receive buffer
+ * @param[in] rxbytes number of bytes to be received
+ * @param[in] timeout the number of ticks before the operation timeouts,
+ * the following special values are allowed:
+ * - @a TIME_INFINITE no timeout.
+ * .
+ * @return The operation status.
+ * @retval RDY_OK if the function succeeded.
+ * @retval RDY_RESET if one or more I2C errors occurred, the errors can
+ * be retrieved using @p i2cGetErrors().
+ * @retval RDY_TIMEOUT if a timeout occurred before operation end. <b>After a
+ * timeout the driver must be stopped and restarted
+ * because the bus is in an uncertain state</b>.
+ *
+ * @notapi
+ */
+msg_t i2c_lld_master_receive_timeout(I2CDriver *i2cp, i2caddr_t addr,
+ uint8_t *rxbuf, size_t rxbytes,
+ systime_t timeout) {
+ I2C_TypeDef *dp = i2cp->i2c;
+ VirtualTimer vt;
+
+#if defined(STM32F1XX_I2C)
+ chDbgCheck((rxbytes > 1), "i2c_lld_master_receive_timeout");
+#endif
+
+ /* Global timeout for the whole operation.*/
+ if (timeout != TIME_INFINITE)
+ chVTSetI(&vt, timeout, i2c_lld_safety_timeout, (void *)i2cp);
+
+ /* Releases the lock from high level driver.*/
+ chSysUnlock();
+
+ /* Initializes driver fields, LSB = 1 -> receive.*/
+ i2cp->addr = (addr << 1) | 0x01;
+ i2cp->errors = 0;
+
+ /* RX DMA setup.*/
+ dmaStreamSetMode(i2cp->dmarx, i2cp->rxdmamode);
+ dmaStreamSetMemory0(i2cp->dmarx, rxbuf);
+ dmaStreamSetTransactionSize(i2cp->dmarx, rxbytes);
+
+ /* Waits until BUSY flag is reset and the STOP from the previous operation
+ is completed, alternatively for a timeout condition.*/
+ while ((dp->SR2 & I2C_SR2_BUSY) || (dp->CR1 & I2C_CR1_STOP)) {
+ chSysLock();
+ if ((timeout != TIME_INFINITE) && !chVTIsArmedI(&vt))
+ return RDY_TIMEOUT;
+ chSysUnlock();
+ }
+
+ /* This lock will be released in high level driver.*/
+ chSysLock();
+
+ /* Atomic check on the timer in order to make sure that a timeout didn't
+ happen outside the critical zone.*/
+ if ((timeout != TIME_INFINITE) && !chVTIsArmedI(&vt))
+ return RDY_TIMEOUT;
+
+ /* Starts the operation.*/
+ dp->CR2 |= I2C_CR2_ITEVTEN;
+ dp->CR1 |= I2C_CR1_START | I2C_CR1_ACK;
+
+ /* Waits for the operation completion or a timeout.*/
+ i2cp->thread = chThdSelf();
+ chSchGoSleepS(THD_STATE_SUSPENDED);
+ if ((timeout != TIME_INFINITE) && chVTIsArmedI(&vt))
+ chVTResetI(&vt);
+
+ return chThdSelf()->p_u.rdymsg;
+}
+
+/**
+ * @brief Transmits data via the I2C bus as master.
+ * @details Number of receiving bytes must be 0 or more than 1 on STM32F1x.
+ * This is hardware restriction.
+ *
+ * @param[in] i2cp pointer to the @p I2CDriver object
+ * @param[in] addr slave device address
+ * @param[in] txbuf pointer to the transmit buffer
+ * @param[in] txbytes number of bytes to be transmitted
+ * @param[out] rxbuf pointer to the receive buffer
+ * @param[in] rxbytes number of bytes to be received
+ * @param[in] timeout the number of ticks before the operation timeouts,
+ * the following special values are allowed:
+ * - @a TIME_INFINITE no timeout.
+ * .
+ * @return The operation status.
+ * @retval RDY_OK if the function succeeded.
+ * @retval RDY_RESET if one or more I2C errors occurred, the errors can
+ * be retrieved using @p i2cGetErrors().
+ * @retval RDY_TIMEOUT if a timeout occurred before operation end. <b>After a
+ * timeout the driver must be stopped and restarted
+ * because the bus is in an uncertain state</b>.
+ *
+ * @notapi
+ */
+msg_t i2c_lld_master_transmit_timeout(I2CDriver *i2cp, i2caddr_t addr,
+ const uint8_t *txbuf, size_t txbytes,
+ uint8_t *rxbuf, size_t rxbytes,
+ systime_t timeout) {
+ I2C_TypeDef *dp = i2cp->i2c;
+ VirtualTimer vt;
+
+#if defined(STM32F1XX_I2C)
+ chDbgCheck(((rxbytes == 0) || ((rxbytes > 1) && (rxbuf != NULL))),
+ "i2c_lld_master_transmit_timeout");
+#endif
+
+ /* Global timeout for the whole operation.*/
+ if (timeout != TIME_INFINITE)
+ chVTSetI(&vt, timeout, i2c_lld_safety_timeout, (void *)i2cp);
+
+ /* Releases the lock from high level driver.*/
+ chSysUnlock();
+
+ /* Initializes driver fields, LSB = 0 -> write.*/
+ i2cp->addr = addr << 1;
+ i2cp->errors = 0;
+
+ /* TX DMA setup.*/
+ dmaStreamSetMode(i2cp->dmatx, i2cp->txdmamode);
+ dmaStreamSetMemory0(i2cp->dmatx, txbuf);
+ dmaStreamSetTransactionSize(i2cp->dmatx, txbytes);
+
+ /* RX DMA setup.*/
+ dmaStreamSetMode(i2cp->dmarx, i2cp->rxdmamode);
+ dmaStreamSetMemory0(i2cp->dmarx, rxbuf);
+ dmaStreamSetTransactionSize(i2cp->dmarx, rxbytes);
+
+ /* Waits until BUSY flag is reset and the STOP from the previous operation
+ is completed, alternatively for a timeout condition.*/
+ while ((dp->SR2 & I2C_SR2_BUSY) || (dp->CR1 & I2C_CR1_STOP)) {
+ chSysLock();
+ if ((timeout != TIME_INFINITE) && !chVTIsArmedI(&vt))
+ return RDY_TIMEOUT;
+ chSysUnlock();
+ }
+
+ /* This lock will be released in high level driver.*/
+ chSysLock();
+
+ /* Atomic check on the timer in order to make sure that a timeout didn't
+ happen outside the critical zone.*/
+ if ((timeout != TIME_INFINITE) && !chVTIsArmedI(&vt))
+ return RDY_TIMEOUT;
+
+ /* Starts the operation.*/
+ dp->CR2 |= I2C_CR2_ITEVTEN;
+ dp->CR1 |= I2C_CR1_START;
+
+ /* Waits for the operation completion or a timeout.*/
+ i2cp->thread = chThdSelf();
+ chSchGoSleepS(THD_STATE_SUSPENDED);
+ if ((timeout != TIME_INFINITE) && chVTIsArmedI(&vt))
+ chVTResetI(&vt);
+
+ return chThdSelf()->p_u.rdymsg;
+}
+
+#endif /* HAL_USE_I2C */
+
+/** @} */
diff --git a/os/hal/platforms/STM32/I2Cv1/i2c_lld.h b/os/hal/platforms/STM32/I2Cv1/i2c_lld.h new file mode 100644 index 000000000..dcadb3278 --- /dev/null +++ b/os/hal/platforms/STM32/I2Cv1/i2c_lld.h @@ -0,0 +1,463 @@ +/*
+ ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+/*
+ Concepts and parts of this file have been contributed by Uladzimir Pylinsky
+ aka barthess.
+ */
+
+/**
+ * @file STM32/I2Cv1/i2c_lld.h
+ * @brief STM32 I2C subsystem low level driver header.
+ *
+ * @addtogroup I2C
+ * @{
+ */
+
+#ifndef _I2C_LLD_H_
+#define _I2C_LLD_H_
+
+#if HAL_USE_I2C || defined(__DOXYGEN__)
+
+/*===========================================================================*/
+/* Driver constants. */
+/*===========================================================================*/
+
+/**
+ * @brief Peripheral clock frequency.
+ */
+#define I2C_CLK_FREQ ((STM32_PCLK1) / 1000000)
+
+/*===========================================================================*/
+/* Driver pre-compile time settings. */
+/*===========================================================================*/
+
+/**
+ * @name Configuration options
+ * @{
+ */
+/**
+ * @brief I2C1 driver enable switch.
+ * @details If set to @p TRUE the support for I2C1 is included.
+ * @note The default is @p FALSE.
+ */
+#if !defined(STM32_I2C_USE_I2C1) || defined(__DOXYGEN__)
+#define STM32_I2C_USE_I2C1 FALSE
+#endif
+
+/**
+ * @brief I2C2 driver enable switch.
+ * @details If set to @p TRUE the support for I2C2 is included.
+ * @note The default is @p FALSE.
+ */
+#if !defined(STM32_I2C_USE_I2C2) || defined(__DOXYGEN__)
+#define STM32_I2C_USE_I2C2 FALSE
+#endif
+
+/**
+ * @brief I2C3 driver enable switch.
+ * @details If set to @p TRUE the support for I2C3 is included.
+ * @note The default is @p FALSE.
+ */
+#if !defined(STM32_I2C_USE_I2C3) || defined(__DOXYGEN__)
+#define STM32_I2C_USE_I2C3 FALSE
+#endif
+
+/**
+ * @brief I2C1 interrupt priority level setting.
+ */
+#if !defined(STM32_I2C_I2C1_IRQ_PRIORITY) || defined(__DOXYGEN__)
+#define STM32_I2C_I2C1_IRQ_PRIORITY 10
+#endif
+
+/**
+ * @brief I2C2 interrupt priority level setting.
+ */
+#if !defined(STM32_I2C_I2C2_IRQ_PRIORITY) || defined(__DOXYGEN__)
+#define STM32_I2C_I2C2_IRQ_PRIORITY 10
+#endif
+
+/**
+ * @brief I2C3 interrupt priority level setting.
+ */
+#if !defined(STM32_I2C_I2C3_IRQ_PRIORITY) || defined(__DOXYGEN__)
+#define STM32_I2C_I2C3_IRQ_PRIORITY 10
+#endif
+
+/**
+* @brief I2C1 DMA priority (0..3|lowest..highest).
+* @note The priority level is used for both the TX and RX DMA streams but
+* because of the streams ordering the RX stream has always priority
+* over the TX stream.
+*/
+#if !defined(STM32_I2C_I2C1_DMA_PRIORITY) || defined(__DOXYGEN__)
+#define STM32_I2C_I2C1_DMA_PRIORITY 1
+#endif
+
+/**
+* @brief I2C2 DMA priority (0..3|lowest..highest).
+* @note The priority level is used for both the TX and RX DMA streams but
+* because of the streams ordering the RX stream has always priority
+* over the TX stream.
+*/
+#if !defined(STM32_I2C_I2C2_DMA_PRIORITY) || defined(__DOXYGEN__)
+#define STM32_I2C_I2C2_DMA_PRIORITY 1
+#endif
+
+/**
+* @brief I2C3 DMA priority (0..3|lowest..highest).
+* @note The priority level is used for both the TX and RX DMA streams but
+* because of the streams ordering the RX stream has always priority
+* over the TX stream.
+*/
+#if !defined(STM32_I2C_I2C3_DMA_PRIORITY) || defined(__DOXYGEN__)
+#define STM32_I2C_I2C3_DMA_PRIORITY 1
+#endif
+
+/**
+ * @brief I2C DMA error hook.
+ * @note The default action for DMA errors is a system halt because DMA
+ * error can only happen because programming errors.
+ */
+#if !defined(STM32_I2C_DMA_ERROR_HOOK) || defined(__DOXYGEN__)
+#define STM32_I2C_DMA_ERROR_HOOK(i2cp) chSysHalt()
+#endif
+
+#if STM32_ADVANCED_DMA || defined(__DOXYGEN__)
+
+/**
+ * @brief DMA stream used for I2C1 RX operations.
+ * @note This option is only available on platforms with enhanced DMA.
+ */
+#if !defined(STM32_I2C_I2C1_RX_DMA_STREAM) || defined(__DOXYGEN__)
+#define STM32_I2C_I2C1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0)
+#endif
+
+/**
+ * @brief DMA stream used for I2C1 TX operations.
+ * @note This option is only available on platforms with enhanced DMA.
+ */
+#if !defined(STM32_I2C_I2C1_TX_DMA_STREAM) || defined(__DOXYGEN__)
+#define STM32_I2C_I2C1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6)
+#endif
+
+/**
+ * @brief DMA stream used for I2C2 RX operations.
+ * @note This option is only available on platforms with enhanced DMA.
+ */
+#if !defined(STM32_I2C_I2C2_RX_DMA_STREAM) || defined(__DOXYGEN__)
+#define STM32_I2C_I2C2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2)
+#endif
+
+/**
+ * @brief DMA stream used for I2C2 TX operations.
+ * @note This option is only available on platforms with enhanced DMA.
+ */
+#if !defined(STM32_I2C_I2C2_TX_DMA_STREAM) || defined(__DOXYGEN__)
+#define STM32_I2C_I2C2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7)
+#endif
+
+/**
+ * @brief DMA stream used for I2C3 RX operations.
+ * @note This option is only available on platforms with enhanced DMA.
+ */
+#if !defined(STM32_I2C_I2C3_RX_DMA_STREAM) || defined(__DOXYGEN__)
+#define STM32_I2C_I2C3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2)
+#endif
+
+/**
+ * @brief DMA stream used for I2C3 TX operations.
+ * @note This option is only available on platforms with enhanced DMA.
+ */
+#if !defined(STM32_I2C_I2C3_TX_DMA_STREAM) || defined(__DOXYGEN__)
+#define STM32_I2C_I2C3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4)
+#endif
+
+#else /* !STM32_ADVANCED_DMA */
+
+/* Fixed streams for platforms using the old DMA peripheral, the values are
+ valid for both STM32F1xx and STM32L1xx.*/
+#define STM32_I2C_I2C1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7)
+#define STM32_I2C_I2C1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6)
+#define STM32_I2C_I2C2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5)
+#define STM32_I2C_I2C2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4)
+
+#endif /* !STM32_ADVANCED_DMA*/
+
+/* Flag for the whole STM32F1XX family. */
+#if defined(STM32F10X_LD_VL) || defined(STM32F10X_MD_VL) || \
+ defined(STM32F10X_LD) || defined(STM32F10X_MD) || \
+ defined(STM32F10X_HD) || defined(STM32F10X_XL) || \
+ defined(STM32F10X_CL)
+#define STM32F1XX_I2C
+#endif
+/** @} */
+
+/*===========================================================================*/
+/* Derived constants and error checks. */
+/*===========================================================================*/
+
+/** @brief error checks */
+#if STM32_I2C_USE_I2C1 && !STM32_HAS_I2C1
+#error "I2C1 not present in the selected device"
+#endif
+
+#if STM32_I2C_USE_I2C2 && !STM32_HAS_I2C2
+#error "I2C2 not present in the selected device"
+#endif
+
+#if STM32_I2C_USE_I2C3 && !STM32_HAS_I2C3
+#error "I2C3 not present in the selected device"
+#endif
+
+#if !STM32_I2C_USE_I2C1 && !STM32_I2C_USE_I2C2 && \
+ !STM32_I2C_USE_I2C3
+#error "I2C driver activated but no I2C peripheral assigned"
+#endif
+
+#if STM32_I2C_USE_I2C1 && \
+ !STM32_DMA_IS_VALID_ID(STM32_I2C_I2C1_RX_DMA_STREAM, \
+ STM32_I2C1_RX_DMA_MSK)
+#error "invalid DMA stream associated to I2C1 RX"
+#endif
+
+#if STM32_I2C_USE_I2C1 && \
+ !STM32_DMA_IS_VALID_ID(STM32_I2C_I2C1_TX_DMA_STREAM, \
+ STM32_I2C1_TX_DMA_MSK)
+#error "invalid DMA stream associated to I2C1 TX"
+#endif
+
+#if STM32_I2C_USE_I2C2 && \
+ !STM32_DMA_IS_VALID_ID(STM32_I2C_I2C2_RX_DMA_STREAM, \
+ STM32_I2C2_RX_DMA_MSK)
+#error "invalid DMA stream associated to I2C2 RX"
+#endif
+
+#if STM32_I2C_USE_I2C2 && \
+ !STM32_DMA_IS_VALID_ID(STM32_I2C_I2C2_TX_DMA_STREAM, \
+ STM32_I2C2_TX_DMA_MSK)
+#error "invalid DMA stream associated to I2C2 TX"
+#endif
+
+#if STM32_I2C_USE_I2C3 && \
+ !STM32_DMA_IS_VALID_ID(STM32_I2C_I2C3_RX_DMA_STREAM, \
+ STM32_I2C3_RX_DMA_MSK)
+#error "invalid DMA stream associated to I2C3 RX"
+#endif
+
+#if STM32_I2C_USE_I2C3 && \
+ !STM32_DMA_IS_VALID_ID(STM32_I2C_I2C3_TX_DMA_STREAM, \
+ STM32_I2C3_TX_DMA_MSK)
+#error "invalid DMA stream associated to I2C3 TX"
+#endif
+
+#if !defined(STM32_DMA_REQUIRED)
+#define STM32_DMA_REQUIRED
+#endif
+
+/* Check clock range. */
+#if defined(STM32F4XX)
+#if !(I2C_CLK_FREQ >= 2) && (I2C_CLK_FREQ <= 42)
+#error "I2C peripheral clock frequency out of range."
+#endif
+
+#elif defined(STM32L1XX_MD)
+#if !(I2C_CLK_FREQ >= 2) && (I2C_CLK_FREQ <= 32)
+#error "I2C peripheral clock frequency out of range."
+#endif
+
+#elif defined(STM32F2XX)
+#if !(I2C_CLK_FREQ >= 2) && (I2C_CLK_FREQ <= 30)
+#error "I2C peripheral clock frequency out of range."
+#endif
+
+#elif defined(STM32F10X_LD_VL) || defined(STM32F10X_MD_VL) || \
+ defined(STM32F10X_HD_VL)
+#if !(I2C_CLK_FREQ >= 2) && (I2C_CLK_FREQ <= 24)
+#error "I2C peripheral clock frequency out of range."
+#endif
+
+#elif defined(STM32F10X_LD) || defined(STM32F10X_MD) || \
+ defined(STM32F10X_HD) || defined(STM32F10X_XL) || \
+ defined(STM32F10X_CL)
+#if !(I2C_CLK_FREQ >= 2) && (I2C_CLK_FREQ <= 36)
+#error "I2C peripheral clock frequency out of range."
+#endif
+#else
+#error "unspecified, unsupported or invalid STM32 platform"
+#endif
+
+/*===========================================================================*/
+/* Driver data structures and types. */
+/*===========================================================================*/
+
+/**
+ * @brief Type representing I2C address.
+ */
+typedef uint16_t i2caddr_t;
+
+/**
+ * @brief I2C Driver condition flags type.
+ */
+typedef uint32_t i2cflags_t;
+
+/**
+ * @brief Supported modes for the I2C bus.
+ */
+typedef enum {
+ OPMODE_I2C = 1,
+ OPMODE_SMBUS_DEVICE = 2,
+ OPMODE_SMBUS_HOST = 3,
+} i2copmode_t;
+
+/**
+ * @brief Supported duty cycle modes for the I2C bus.
+ */
+typedef enum {
+ STD_DUTY_CYCLE = 1,
+ FAST_DUTY_CYCLE_2 = 2,
+ FAST_DUTY_CYCLE_16_9 = 3,
+} i2cdutycycle_t;
+
+/**
+ * @brief Driver configuration structure.
+ */
+typedef struct {
+ i2copmode_t op_mode; /**< @brief Specifies the I2C mode. */
+ uint32_t clock_speed; /**< @brief Specifies the clock frequency.
+ @note Must be set to a value lower
+ than 400kHz. */
+ i2cdutycycle_t duty_cycle; /**< @brief Specifies the I2C fast mode
+ duty cycle. */
+} I2CConfig;
+
+/**
+ * @brief Type of a structure representing an I2C driver.
+ */
+typedef struct I2CDriver I2CDriver;
+
+/**
+ * @brief Structure representing an I2C driver.
+ */
+struct I2CDriver {
+ /**
+ * @brief Driver state.
+ */
+ i2cstate_t state;
+ /**
+ * @brief Current configuration data.
+ */
+ const I2CConfig *config;
+ /**
+ * @brief Error flags.
+ */
+ i2cflags_t errors;
+#if I2C_USE_MUTUAL_EXCLUSION || defined(__DOXYGEN__)
+#if CH_USE_MUTEXES || defined(__DOXYGEN__)
+ /**
+ * @brief Mutex protecting the bus.
+ */
+ Mutex mutex;
+#elif CH_USE_SEMAPHORES
+ Semaphore semaphore;
+#endif
+#endif /* I2C_USE_MUTUAL_EXCLUSION */
+#if defined(I2C_DRIVER_EXT_FIELDS)
+ I2C_DRIVER_EXT_FIELDS
+#endif
+ /* End of the mandatory fields.*/
+ /**
+ * @brief Thread waiting for I/O completion.
+ */
+ Thread *thread;
+ /**
+ * @brief Current slave address without R/W bit.
+ */
+ i2caddr_t addr;
+ /**
+ * @brief RX DMA mode bit mask.
+ */
+ uint32_t rxdmamode;
+ /**
+ * @brief TX DMA mode bit mask.
+ */
+ uint32_t txdmamode;
+ /**
+ * @brief Receive DMA channel.
+ */
+ const stm32_dma_stream_t *dmarx;
+ /**
+ * @brief Transmit DMA channel.
+ */
+ const stm32_dma_stream_t *dmatx;
+ /**
+ * @brief Pointer to the I2Cx registers block.
+ */
+ I2C_TypeDef *i2c;
+};
+
+/*===========================================================================*/
+/* Driver macros. */
+/*===========================================================================*/
+
+/**
+ * @brief Get errors from I2C driver.
+ *
+ * @param[in] i2cp pointer to the @p I2CDriver object
+ *
+ * @notapi
+ */
+#define i2c_lld_get_errors(i2cp) ((i2cp)->errors)
+
+/*===========================================================================*/
+/* External declarations. */
+/*===========================================================================*/
+
+#if !defined(__DOXYGEN__)
+#if STM32_I2C_USE_I2C1
+extern I2CDriver I2CD1;
+#endif
+
+#if STM32_I2C_USE_I2C2
+extern I2CDriver I2CD2;
+#endif
+
+#if STM32_I2C_USE_I2C3
+extern I2CDriver I2CD3;
+#endif
+#endif /* !defined(__DOXYGEN__) */
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+ void i2c_lld_init(void);
+ void i2c_lld_start(I2CDriver *i2cp);
+ void i2c_lld_stop(I2CDriver *i2cp);
+ msg_t i2c_lld_master_transmit_timeout(I2CDriver *i2cp, i2caddr_t addr,
+ const uint8_t *txbuf, size_t txbytes,
+ uint8_t *rxbuf, size_t rxbytes,
+ systime_t timeout);
+ msg_t i2c_lld_master_receive_timeout(I2CDriver *i2cp, i2caddr_t addr,
+ uint8_t *rxbuf, size_t rxbytes,
+ systime_t timeout);
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* HAL_USE_I2C */
+
+#endif /* _I2C_LLD_H_ */
+
+/** @} */
diff --git a/os/hal/platforms/STM32/I2Cv2/i2c_lld.c b/os/hal/platforms/STM32/I2Cv2/i2c_lld.c new file mode 100644 index 000000000..1050dc08f --- /dev/null +++ b/os/hal/platforms/STM32/I2Cv2/i2c_lld.c @@ -0,0 +1,789 @@ +/*
+ ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+/*
+ Concepts and parts of this file have been contributed by Uladzimir Pylinsky
+ aka barthess.
+ */
+
+/**
+ * @file STM32/I2Cv2/i2c_lld.c
+ * @brief STM32 I2C subsystem low level driver source.
+ *
+ * @addtogroup I2C
+ * @{
+ */
+
+#include "ch.h"
+#include "hal.h"
+
+#if HAL_USE_I2C || defined(__DOXYGEN__)
+
+/*===========================================================================*/
+/* Driver local definitions. */
+/*===========================================================================*/
+
+#define DMAMODE_COMMON \
+ (STM32_DMA_CR_PSIZE_BYTE | STM32_DMA_CR_MSIZE_BYTE | \
+ STM32_DMA_CR_MINC | STM32_DMA_CR_DMEIE | \
+ STM32_DMA_CR_TEIE | STM32_DMA_CR_TCIE)
+
+#define I2C1_RX_DMA_CHANNEL \
+ STM32_DMA_GETCHANNEL(STM32_I2C_I2C1_RX_DMA_STREAM, \
+ STM32_I2C1_RX_DMA_CHN)
+
+#define I2C1_TX_DMA_CHANNEL \
+ STM32_DMA_GETCHANNEL(STM32_I2C_I2C1_TX_DMA_STREAM, \
+ STM32_I2C1_TX_DMA_CHN)
+
+#define I2C2_RX_DMA_CHANNEL \
+ STM32_DMA_GETCHANNEL(STM32_I2C_I2C2_RX_DMA_STREAM, \
+ STM32_I2C2_RX_DMA_CHN)
+
+#define I2C2_TX_DMA_CHANNEL \
+ STM32_DMA_GETCHANNEL(STM32_I2C_I2C2_TX_DMA_STREAM, \
+ STM32_I2C2_TX_DMA_CHN)
+
+/*===========================================================================*/
+/* Driver constants. */
+/*===========================================================================*/
+
+#define I2C_MASTER_TC \
+ ((uint32_t)(I2C_ISR_BUSY | I2C_ISR_TC))
+
+#define I2C_ERROR_MASK \
+ ((uint32_t)(I2C_ISR_BERR | I2C_ISR_ARLO | I2C_ISR_OVR | I2C_ISR_PECERR | \
+ I2C_ISR_TIMEOUT | I2C_ISR_ALERT))
+
+#define I2C_INT_MASK \
+ ((uint32_t)(I2C_ISR_TCR | I2C_ISR_TC | I2C_ISR_STOPF | I2C_ISR_NACKF | \
+ I2C_ISR_ADDR | I2C_ISR_RXNE | I2C_ISR_TXIS))
+
+/*===========================================================================*/
+/* Driver exported variables. */
+/*===========================================================================*/
+
+/** @brief I2C1 driver identifier.*/
+#if STM32_I2C_USE_I2C1 || defined(__DOXYGEN__)
+I2CDriver I2CD1;
+#endif
+
+/** @brief I2C2 driver identifier.*/
+#if STM32_I2C_USE_I2C2 || defined(__DOXYGEN__)
+I2CDriver I2CD2;
+#endif
+
+/*===========================================================================*/
+/* Driver local variables. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver local functions. */
+/*===========================================================================*/
+
+/**
+ * @brief Wakes up the waiting thread.
+ *
+ * @param[in] i2cp pointer to the @p I2CDriver object
+ * @param[in] msg wakeup message
+ *
+ * @notapi
+ */
+#define wakeup_isr(i2cp, msg) { \
+ chSysLockFromIsr(); \
+ if ((i2cp)->thread != NULL) { \
+ Thread *tp = (i2cp)->thread; \
+ (i2cp)->thread = NULL; \
+ tp->p_u.rdymsg = (msg); \
+ chSchReadyI(tp); \
+ } \
+ chSysUnlockFromIsr(); \
+}
+
+/**
+ * @brief Aborts an I2C transaction.
+ *
+ * @param[in] i2cp pointer to the @p I2CDriver object
+ *
+ * @notapi
+ */
+static void i2c_lld_abort_operation(I2CDriver *i2cp) {
+ I2C_TypeDef *dp = i2cp->i2c;
+
+ if (dp->CR1 & I2C_CR1_PE) {
+ /* Stops the I2C peripheral.*/
+ dp->CR1 &= ~I2C_CR1_PE;
+ while (dp->CR1 & I2C_CR1_PE)
+ dp->CR1 &= ~I2C_CR1_PE;
+ dp->CR1 |= I2C_CR1_PE;
+ }
+
+ /* Stops the associated DMA streams.*/
+ dmaStreamDisable(i2cp->dmatx);
+ dmaStreamDisable(i2cp->dmarx);
+}
+
+/**
+ * @brief Handling of stalled I2C transactions.
+ *
+ * @param[in] i2cp pointer to the @p I2CDriver object
+ *
+ * @notapi
+ */
+static void i2c_lld_safety_timeout(void *p) {
+ I2CDriver *i2cp = (I2CDriver *)p;
+
+ chSysLockFromIsr();
+ if (i2cp->thread) {
+ Thread *tp = i2cp->thread;
+ i2c_lld_abort_operation(i2cp);
+ i2cp->thread = NULL;
+ tp->p_u.rdymsg = RDY_TIMEOUT;
+ chSchReadyI(tp);
+ }
+ chSysUnlockFromIsr();
+}
+
+/**
+ * @brief I2C shared ISR code.
+ *
+ * @param[in] i2cp pointer to the @p I2CDriver object
+ * @param[in] isr content of the ISR register to be decoded
+ *
+ * @notapi
+ */
+static void i2c_lld_serve_interrupt(I2CDriver *i2cp, uint32_t isr) {
+ I2C_TypeDef *dp = i2cp->i2c;
+
+ if ((isr & I2C_ISR_TC) && (i2cp->state == I2C_ACTIVE_TX)) {
+ size_t rxbytes;
+
+ /* Make sure no more 'Transfer complete' interrupts.*/
+ dp->CR1 &= ~I2C_CR1_TCIE;
+
+ rxbytes = dmaStreamGetTransactionSize(i2cp->dmarx);
+ if (rxbytes > 0) {
+ i2cp->state = I2C_ACTIVE_RX;
+
+ /* Enable RX DMA */
+ dmaStreamEnable(i2cp->dmarx);
+
+ dp->CR2 &= ~I2C_CR2_NBYTES;
+ dp->CR2 |= rxbytes << 16;
+
+ /* Starts the read operation.*/
+ dp->CR2 |= I2C_CR2_RD_WRN;
+ dp->CR2 |= I2C_CR2_START;
+ }
+ else {
+ /* Nothing to receive - send STOP immediately.*/
+ dp->CR2 |= I2C_CR2_STOP;
+ }
+ }
+ if (isr & I2C_ISR_NACKF) {
+ /* Starts a STOP sequence immediately on error.*/
+ dp->CR2 |= I2C_CR2_STOP;
+
+ i2cp->errors |= I2CD_ACK_FAILURE;
+ }
+ if (isr & I2C_ISR_STOPF) {
+ /* Stops the associated DMA streams.*/
+ dmaStreamDisable(i2cp->dmatx);
+ dmaStreamDisable(i2cp->dmarx);
+
+ if (i2cp->errors) {
+ wakeup_isr(i2cp, RDY_RESET);
+ }
+ else {
+ wakeup_isr(i2cp, RDY_OK);
+ }
+ }
+}
+
+/**
+ * @brief DMA RX end IRQ handler.
+ *
+ * @param[in] i2cp pointer to the @p I2CDriver object
+ * @param[in] flags pre-shifted content of the ISR register
+ *
+ * @notapi
+ */
+static void i2c_lld_serve_rx_end_irq(I2CDriver *i2cp, uint32_t flags) {
+ I2C_TypeDef *dp = i2cp->i2c;
+
+ /* DMA errors handling.*/
+#if defined(STM32_I2C_DMA_ERROR_HOOK)
+ if ((flags & (STM32_DMA_ISR_TEIF | STM32_DMA_ISR_DMEIF)) != 0) {
+ STM32_I2C_DMA_ERROR_HOOK(i2cp);
+ }
+#else
+ (void)flags;
+#endif
+
+ dmaStreamDisable(i2cp->dmarx);
+ dp->CR2 |= I2C_CR2_STOP;
+ wakeup_isr(i2cp, RDY_OK);
+}
+
+/**
+ * @brief DMA TX end IRQ handler.
+ *
+ * @param[in] i2cp pointer to the @p I2CDriver object
+ *
+ * @notapi
+ */
+static void i2c_lld_serve_tx_end_irq(I2CDriver *i2cp, uint32_t flags) {
+
+ /* DMA errors handling.*/
+#if defined(STM32_I2C_DMA_ERROR_HOOK)
+ if ((flags & (STM32_DMA_ISR_TEIF | STM32_DMA_ISR_DMEIF)) != 0) {
+ STM32_I2C_DMA_ERROR_HOOK(i2cp);
+ }
+#else
+ (void)flags;
+#endif
+
+ dmaStreamDisable(i2cp->dmatx);
+}
+
+/**
+ * @brief I2C error handler.
+ *
+ * @param[in] i2cp pointer to the @p I2CDriver object
+ * @param[in] isr content of the ISR register to be decoded
+ *
+ * @notapi
+ */
+static void i2c_lld_serve_error_interrupt(I2CDriver *i2cp, uint32_t isr) {
+
+ /* Clears interrupt flags just to be safe.*/
+ dmaStreamDisable(i2cp->dmatx);
+ dmaStreamDisable(i2cp->dmarx);
+
+ if (isr & I2C_ISR_BERR)
+ i2cp->errors |= I2CD_BUS_ERROR;
+
+ if (isr & I2C_ISR_ARLO)
+ i2cp->errors |= I2CD_ARBITRATION_LOST;
+
+ if (isr & I2C_ISR_OVR)
+ i2cp->errors |= I2CD_OVERRUN;
+
+ if (isr & I2C_ISR_TIMEOUT)
+ i2cp->errors |= I2CD_TIMEOUT;
+
+ /* If some error has been identified then sends wakes the waiting thread.*/
+ if (i2cp->errors != I2CD_NO_ERROR)
+ wakeup_isr(i2cp, RDY_RESET);
+}
+
+/*===========================================================================*/
+/* Driver interrupt handlers. */
+/*===========================================================================*/
+
+#if STM32_I2C_USE_I2C1 || defined(__DOXYGEN__)
+#if defined(STM32_I2C1_GLOBAL_HANDLER) || defined(__DOXYGEN__)
+/**
+ * @brief I2C1 event interrupt handler.
+ *
+ * @notapi
+ */
+CH_IRQ_HANDLER(STM32_I2C1_GLOBAL_HANDLER) {
+ uint32_t isr = I2CD1.i2c->ISR;
+
+ CH_IRQ_PROLOGUE();
+
+ /* Clearing IRQ bits.*/
+ I2CD1.i2c->ICR = isr;
+
+ if (isr & I2C_ERROR_MASK)
+ i2c_lld_serve_error_interrupt(&I2CD1, isr);
+ else if (isr & I2C_INT_MASK)
+ i2c_lld_serve_interrupt(&I2CD1, isr);
+
+ CH_IRQ_EPILOGUE();
+}
+
+#elif defined(STM32_I2C1_EVENT_HANDLER) && defined(STM32_I2C1_ERROR_HANDLER)
+CH_IRQ_HANDLER(STM32_I2C1_EVENT_HANDLER) {
+ uint32_t isr = I2CD1.i2c->ISR;
+
+ CH_IRQ_PROLOGUE();
+
+ /* Clearing IRQ bits.*/
+ I2CD1.i2c->ICR = isr & I2C_INT_MASK;
+
+ i2c_lld_serve_interrupt(&I2CD1, isr);
+
+ CH_IRQ_EPILOGUE();
+}
+
+CH_IRQ_HANDLER(STM32_I2C1_ERROR_HANDLER) {
+ uint32_t isr = I2CD1.i2c->ISR;
+
+ CH_IRQ_PROLOGUE();
+
+ /* Clearing IRQ bits.*/
+ I2CD1.i2c->ICR = isr & I2C_ERROR_MASK;
+
+ i2c_lld_serve_error_interrupt(&I2CD1, isr);
+
+ CH_IRQ_EPILOGUE();
+}
+
+#else
+#error "I2C1 interrupt handlers not defined"
+#endif
+#endif /* STM32_I2C_USE_I2C1 */
+
+#if STM32_I2C_USE_I2C2 || defined(__DOXYGEN__)
+#if defined(STM32_I2C2_GLOBAL_HANDLER) || defined(__DOXYGEN__)
+/**
+ * @brief I2C2 event interrupt handler.
+ *
+ * @notapi
+ */
+CH_IRQ_HANDLER(STM32_I2C2_GLOBAL_HANDLER) {
+ uint32_t isr = I2CD2.i2c->ISR;
+
+ CH_IRQ_PROLOGUE();
+
+ /* Clearing IRQ bits.*/
+ I2CD2.i2c->ICR = isr;
+
+ if (isr & I2C_ERROR_MASK)
+ i2c_lld_serve_error_interrupt(&I2CD2, isr);
+ else if (isr & I2C_INT_MASK)
+ i2c_lld_serve_interrupt(&I2CD2, isr);
+
+ CH_IRQ_EPILOGUE();
+}
+
+#elif defined(STM32_I2C2_EVENT_HANDLER) && defined(STM32_I2C2_ERROR_HANDLER)
+CH_IRQ_HANDLER(STM32_I2C2_EVENT_HANDLER) {
+ uint32_t isr = I2CD2.i2c->ISR;
+
+ CH_IRQ_PROLOGUE();
+
+ /* Clearing IRQ bits.*/
+ I2CD2.i2c->ICR = isr & I2C_INT_MASK;
+
+ i2c_lld_serve_interrupt(&I2CD2, isr);
+
+ CH_IRQ_EPILOGUE();
+}
+
+CH_IRQ_HANDLER(STM32_I2C2_ERROR_HANDLER) {
+ uint32_t isr = I2CD2.i2c->ISR;
+
+ CH_IRQ_PROLOGUE();
+
+ /* Clearing IRQ bits.*/
+ I2CD2.i2c->ICR = isr & I2C_ERROR_MASK;
+
+ i2c_lld_serve_error_interrupt(&I2CD2, isr);
+
+ CH_IRQ_EPILOGUE();
+}
+
+#else
+#error "I2C2 interrupt handlers not defined"
+#endif
+#endif /* STM32_I2C_USE_I2C2 */
+
+/*===========================================================================*/
+/* Driver exported functions. */
+/*===========================================================================*/
+
+/**
+ * @brief Low level I2C driver initialization.
+ *
+ * @notapi
+ */
+void i2c_lld_init(void) {
+
+#if STM32_I2C_USE_I2C1
+ i2cObjectInit(&I2CD1);
+ I2CD1.thread = NULL;
+ I2CD1.i2c = I2C1;
+ I2CD1.dmarx = STM32_DMA_STREAM(STM32_I2C_I2C1_RX_DMA_STREAM);
+ I2CD1.dmatx = STM32_DMA_STREAM(STM32_I2C_I2C1_TX_DMA_STREAM);
+#endif /* STM32_I2C_USE_I2C1 */
+
+#if STM32_I2C_USE_I2C2
+ i2cObjectInit(&I2CD2);
+ I2CD2.thread = NULL;
+ I2CD2.i2c = I2C2;
+ I2CD2.dmarx = STM32_DMA_STREAM(STM32_I2C_I2C2_RX_DMA_STREAM);
+ I2CD2.dmatx = STM32_DMA_STREAM(STM32_I2C_I2C2_TX_DMA_STREAM);
+#endif /* STM32_I2C_USE_I2C2 */
+}
+
+/**
+ * @brief Configures and activates the I2C peripheral.
+ *
+ * @param[in] i2cp pointer to the @p I2CDriver object
+ *
+ * @notapi
+ */
+void i2c_lld_start(I2CDriver *i2cp) {
+ I2C_TypeDef *dp = i2cp->i2c;
+
+ i2cp->txdmamode = DMAMODE_COMMON | STM32_DMA_CR_DIR_M2P;
+ i2cp->rxdmamode = DMAMODE_COMMON | STM32_DMA_CR_DIR_P2M;
+
+ /* Make sure I2C peripheral is disabled */
+ dp->CR1 &= ~I2C_CR1_PE;
+
+ /* If in stopped state then enables the I2C and DMA clocks.*/
+ if (i2cp->state == I2C_STOP) {
+
+#if STM32_I2C_USE_I2C1
+ if (&I2CD1 == i2cp) {
+ bool_t b;
+
+ rccResetI2C1();
+ b = dmaStreamAllocate(i2cp->dmarx,
+ STM32_I2C_I2C1_IRQ_PRIORITY,
+ (stm32_dmaisr_t)i2c_lld_serve_rx_end_irq,
+ (void *)i2cp);
+ chDbgAssert(!b, "i2c_lld_start(), #1", "stream already allocated");
+ b = dmaStreamAllocate(i2cp->dmatx,
+ STM32_I2C_I2C1_IRQ_PRIORITY,
+ (stm32_dmaisr_t)i2c_lld_serve_tx_end_irq,
+ (void *)i2cp);
+ chDbgAssert(!b, "i2c_lld_start(), #2", "stream already allocated");
+ rccEnableI2C1(FALSE);
+
+#if defined(STM32_I2C1_GLOBAL_NUMBER) || defined(__DOXYGEN__)
+ nvicEnableVector(STM32_I2C1_GLOBAL_NUMBER,
+ CORTEX_PRIORITY_MASK(STM32_I2C_I2C1_IRQ_PRIORITY));
+#elif defined(STM32_I2C1_EVENT_NUMBER) && defined(STM32_I2C1_ERROR_NUMBER)
+ nvicEnableVector(STM32_I2C1_EVENT_NUMBER,
+ CORTEX_PRIORITY_MASK(STM32_I2C_I2C1_IRQ_PRIORITY));
+ nvicEnableVector(STM32_I2C1_ERROR_NUMBER,
+ CORTEX_PRIORITY_MASK(STM32_I2C_I2C1_IRQ_PRIORITY));
+#else
+#error "I2C1 interrupt numbers not defined"
+#endif
+
+ i2cp->rxdmamode |= STM32_DMA_CR_CHSEL(I2C1_RX_DMA_CHANNEL) |
+ STM32_DMA_CR_PL(STM32_I2C_I2C1_DMA_PRIORITY);
+ i2cp->txdmamode |= STM32_DMA_CR_CHSEL(I2C1_TX_DMA_CHANNEL) |
+ STM32_DMA_CR_PL(STM32_I2C_I2C1_DMA_PRIORITY);
+ }
+#endif /* STM32_I2C_USE_I2C1 */
+
+#if STM32_I2C_USE_I2C2
+ if (&I2CD2 == i2cp) {
+ bool_t b;
+
+ rccResetI2C2();
+ b = dmaStreamAllocate(i2cp->dmarx,
+ STM32_I2C_I2C2_IRQ_PRIORITY,
+ (stm32_dmaisr_t)i2c_lld_serve_rx_end_irq,
+ (void *)i2cp);
+ chDbgAssert(!b, "i2c_lld_start(), #3", "stream already allocated");
+ b = dmaStreamAllocate(i2cp->dmatx,
+ STM32_I2C_I2C2_IRQ_PRIORITY,
+ (stm32_dmaisr_t)i2c_lld_serve_tx_end_irq,
+ (void *)i2cp);
+ chDbgAssert(!b, "i2c_lld_start(), #4", "stream already allocated");
+ rccEnableI2C2(FALSE);
+
+#if defined(STM32_I2C2_GLOBAL_NUMBER) || defined(__DOXYGEN__)
+ nvicEnableVector(STM32_I2C2_GLOBAL_NUMBER,
+ CORTEX_PRIORITY_MASK(STM32_I2C_I2C2_IRQ_PRIORITY));
+#elif defined(STM32_I2C2_EVENT_NUMBER) && defined(STM32_I2C2_ERROR_NUMBER)
+ nvicEnableVector(STM32_I2C2_EVENT_NUMBER,
+ CORTEX_PRIORITY_MASK(STM32_I2C_I2C2_IRQ_PRIORITY));
+ nvicEnableVector(STM32_I2C2_ERROR_NUMBER,
+ CORTEX_PRIORITY_MASK(STM32_I2C_I2C2_IRQ_PRIORITY));
+#else
+#error "I2C2 interrupt numbers not defined"
+#endif
+
+ i2cp->rxdmamode |= STM32_DMA_CR_CHSEL(I2C2_RX_DMA_CHANNEL) |
+ STM32_DMA_CR_PL(STM32_I2C_I2C2_DMA_PRIORITY);
+ i2cp->txdmamode |= STM32_DMA_CR_CHSEL(I2C2_TX_DMA_CHANNEL) |
+ STM32_DMA_CR_PL(STM32_I2C_I2C2_DMA_PRIORITY);
+ }
+#endif /* STM32_I2C_USE_I2C2 */
+ }
+
+ /* I2C registers pointed by the DMA.*/
+ dmaStreamSetPeripheral(i2cp->dmarx, &dp->RXDR);
+ dmaStreamSetPeripheral(i2cp->dmatx, &dp->TXDR);
+
+ /* Reset i2c peripheral, the TCIE bit will be handled separately.*/
+ dp->CR1 = i2cp->config->cr1 | I2C_CR1_ERRIE | I2C_CR1_STOPIE |
+ I2C_CR1_NACKIE | I2C_CR1_TXDMAEN | I2C_CR1_RXDMAEN;
+
+ /* Set slave address field (master mode) */
+ dp->CR2 = (i2cp->config->cr2 & ~I2C_CR2_SADD);
+
+ /* Setup I2C parameters.*/
+ dp->TIMINGR = i2cp->config->timingr;
+
+ /* Ready to go.*/
+ dp->CR1 |= I2C_CR1_PE;
+}
+
+/**
+ * @brief Deactivates the I2C peripheral.
+ *
+ * @param[in] i2cp pointer to the @p I2CDriver object
+ *
+ * @notapi
+ */
+void i2c_lld_stop(I2CDriver *i2cp) {
+
+ /* If not in stopped state then disables the I2C clock.*/
+ if (i2cp->state != I2C_STOP) {
+
+ /* I2C disable.*/
+ i2c_lld_abort_operation(i2cp);
+ dmaStreamRelease(i2cp->dmatx);
+ dmaStreamRelease(i2cp->dmarx);
+
+#if STM32_I2C_USE_I2C1
+ if (&I2CD1 == i2cp) {
+#if defined(STM32_I2C1_GLOBAL_NUMBER) || defined(__DOXYGEN__)
+ nvicDisableVector(STM32_I2C1_GLOBAL_NUMBER);
+#elif defined(STM32_I2C1_EVENT_NUMBER) && defined(STM32_I2C1_ERROR_NUMBER)
+ nvicDisableVector(STM32_I2C1_EVENT_NUMBER);
+ nvicDisableVector(STM32_I2C1_ERROR_NUMBER);
+#else
+#error "I2C1 interrupt numbers not defined"
+#endif
+
+ rccDisableI2C1(FALSE);
+ }
+#endif
+
+#if STM32_I2C_USE_I2C2
+ if (&I2CD2 == i2cp) {
+#if defined(STM32_I2C2_GLOBAL_NUMBER) || defined(__DOXYGEN__)
+ nvicDisableVector(STM32_I2C2_GLOBAL_NUMBER);
+#elif defined(STM32_I2C2_EVENT_NUMBER) && defined(STM32_I2C2_ERROR_NUMBER)
+ nvicDisableVector(STM32_I2C2_EVENT_NUMBER);
+ nvicDisableVector(STM32_I2C2_ERROR_NUMBER);
+#else
+#error "I2C2 interrupt numbers not defined"
+#endif
+
+ rccDisableI2C2(FALSE);
+ }
+#endif
+ }
+}
+
+/**
+ * @brief Receives data via the I2C bus as master.
+ * @details Number of receiving bytes must be more than 1 on STM32F1x. This is
+ * hardware restriction.
+ *
+ * @param[in] i2cp pointer to the @p I2CDriver object
+ * @param[in] addr slave device address
+ * @param[out] rxbuf pointer to the receive buffer
+ * @param[in] rxbytes number of bytes to be received
+ * @param[in] timeout the number of ticks before the operation timeouts,
+ * the following special values are allowed:
+ * - @a TIME_INFINITE no timeout.
+ * .
+ * @return The operation status.
+ * @retval RDY_OK if the function succeeded.
+ * @retval RDY_RESET if one or more I2C errors occurred, the errors can
+ * be retrieved using @p i2cGetErrors().
+ * @retval RDY_TIMEOUT if a timeout occurred before operation end. <b>After a
+ * timeout the driver must be stopped and restarted
+ * because the bus is in an uncertain state</b>.
+ *
+ * @notapi
+ */
+msg_t i2c_lld_master_receive_timeout(I2CDriver *i2cp, i2caddr_t addr,
+ uint8_t *rxbuf, size_t rxbytes,
+ systime_t timeout) {
+ I2C_TypeDef *dp = i2cp->i2c;
+ VirtualTimer vt;
+ uint32_t addr_cr2 = addr & I2C_CR2_SADD;
+
+ chDbgCheck((rxbytes > 0), "i2c_lld_master_receive_timeout");
+
+ /* Resetting error flags for this transfer.*/
+ i2cp->errors = I2CD_NO_ERROR;
+
+ /* Global timeout for the whole operation.*/
+ if (timeout != TIME_INFINITE)
+ chVTSetI(&vt, timeout, i2c_lld_safety_timeout, (void *)i2cp);
+
+ /* Releases the lock from high level driver.*/
+ chSysUnlock();
+
+ /* Waits until BUSY flag is reset and the STOP from the previous operation
+ is completed, alternatively for a timeout condition.*/
+ while (dp->ISR & I2C_ISR_BUSY) {
+ chSysLock();
+ if ((timeout != TIME_INFINITE) && !chVTIsArmedI(&vt))
+ return RDY_TIMEOUT;
+ chSysUnlock();
+ }
+
+ /* This lock will be released in high level driver.*/
+ chSysLock();
+
+ /* Adjust slave address (master mode) for 7-bit address mode */
+ if ((i2cp->config->cr2 & I2C_CR2_ADD10) == 0)
+ addr_cr2 = (addr_cr2 & 0x7f) << 1;
+
+ /* Set slave address field (master mode) */
+ dp->CR2 &= ~(I2C_CR2_SADD | I2C_CR2_NBYTES);
+ dp->CR2 |= (rxbytes << 16) | addr_cr2;
+
+ /* Initializes driver fields */
+ i2cp->errors = 0;
+
+ /* RX DMA setup.*/
+ dmaStreamSetMode(i2cp->dmarx, i2cp->rxdmamode);
+ dmaStreamSetMemory0(i2cp->dmarx, rxbuf);
+ dmaStreamSetTransactionSize(i2cp->dmarx, rxbytes);
+
+ /* Enable RX DMA */
+ dmaStreamEnable(i2cp->dmarx);
+
+ /* Atomic check on the timer in order to make sure that a timeout didn't
+ happen outside the critical zone.*/
+ if ((timeout != TIME_INFINITE) && !chVTIsArmedI(&vt))
+ return RDY_TIMEOUT;
+
+ /* Starts the operation.*/
+ dp->CR2 |= I2C_CR2_RD_WRN;
+ dp->CR2 |= I2C_CR2_START;
+
+ /* Waits for the operation completion or a timeout.*/
+ i2cp->thread = chThdSelf();
+ chSchGoSleepS(THD_STATE_SUSPENDED);
+ if ((timeout != TIME_INFINITE) && chVTIsArmedI(&vt))
+ chVTResetI(&vt);
+
+ return chThdSelf()->p_u.rdymsg;
+}
+
+/**
+ * @brief Transmits data via the I2C bus as master.
+ * @details Number of receiving bytes must be 0 or more than 1 on STM32F1x.
+ * This is hardware restriction.
+ *
+ * @param[in] i2cp pointer to the @p I2CDriver object
+ * @param[in] addr slave device address
+ * @param[in] txbuf pointer to the transmit buffer
+ * @param[in] txbytes number of bytes to be transmitted
+ * @param[out] rxbuf pointer to the receive buffer
+ * @param[in] rxbytes number of bytes to be received
+ * @param[in] timeout the number of ticks before the operation timeouts,
+ * the following special values are allowed:
+ * - @a TIME_INFINITE no timeout.
+ * .
+ * @return The operation status.
+ * @retval RDY_OK if the function succeeded.
+ * @retval RDY_RESET if one or more I2C errors occurred, the errors can
+ * be retrieved using @p i2cGetErrors().
+ * @retval RDY_TIMEOUT if a timeout occurred before operation end. <b>After a
+ * timeout the driver must be stopped and restarted
+ * because the bus is in an uncertain state</b>.
+ *
+ * @notapi
+ */
+msg_t i2c_lld_master_transmit_timeout(I2CDriver *i2cp, i2caddr_t addr,
+ const uint8_t *txbuf, size_t txbytes,
+ uint8_t *rxbuf, size_t rxbytes,
+ systime_t timeout) {
+ I2C_TypeDef *dp = i2cp->i2c;
+ VirtualTimer vt;
+ uint32_t addr_cr2 = addr & I2C_CR2_SADD;
+
+ chDbgCheck(((rxbytes == 0) || ((rxbytes > 0) && (rxbuf != NULL))),
+ "i2c_lld_master_transmit_timeout");
+
+ /* Resetting error flags for this transfer.*/
+ i2cp->errors = I2CD_NO_ERROR;
+
+ /* Global timeout for the whole operation.*/
+ if (timeout != TIME_INFINITE)
+ chVTSetI(&vt, timeout, i2c_lld_safety_timeout, (void *)i2cp);
+
+ /* Releases the lock from high level driver.*/
+ chSysUnlock();
+
+ /* Waits until BUSY flag is reset and the STOP from the previous operation
+ is completed, alternatively for a timeout condition.*/
+ while (dp->ISR & I2C_ISR_BUSY) {
+ chSysLock();
+ if ((timeout != TIME_INFINITE) && !chVTIsArmedI(&vt))
+ return RDY_TIMEOUT;
+ chSysUnlock();
+ }
+
+ /* This lock will be released in high level driver.*/
+ chSysLock();
+
+ /* Adjust slave address (master mode) for 7-bit address mode */
+ if ((i2cp->config->cr2 & I2C_CR2_ADD10) == 0)
+ addr_cr2 = (addr_cr2 & 0x7f) << 1;
+
+ /* Set slave address field (master mode) */
+ dp->CR2 &= ~(I2C_CR2_SADD | I2C_CR2_NBYTES);
+ dp->CR2 |= (txbytes << 16) | addr_cr2;
+
+ /* Initializes driver fields */
+ i2cp->errors = 0;
+
+ /* TX DMA setup.*/
+ dmaStreamSetMode(i2cp->dmatx, i2cp->txdmamode);
+ dmaStreamSetMemory0(i2cp->dmatx, txbuf);
+ dmaStreamSetTransactionSize(i2cp->dmatx, txbytes);
+
+ /* RX DMA setup.*/
+ dmaStreamSetMode(i2cp->dmarx, i2cp->rxdmamode);
+ dmaStreamSetMemory0(i2cp->dmarx, rxbuf);
+ dmaStreamSetTransactionSize(i2cp->dmarx, rxbytes);
+
+ /* Enable TX DMA */
+ dmaStreamEnable(i2cp->dmatx);
+
+ /* Atomic check on the timer in order to make sure that a timeout didn't
+ happen outside the critical zone.*/
+ if ((timeout != TIME_INFINITE) && !chVTIsArmedI(&vt))
+ return RDY_TIMEOUT;
+
+ /* Transmission complete interrupt enabled.*/
+ dp->CR1 |= I2C_CR1_TCIE;
+
+ /* Starts the operation as the very last thing.*/
+ dp->CR2 &= ~I2C_CR2_RD_WRN;
+ dp->CR2 |= I2C_CR2_START;
+
+ /* Waits for the operation completion or a timeout.*/
+ i2cp->thread = chThdSelf();
+ chSchGoSleepS(THD_STATE_SUSPENDED);
+ if ((timeout != TIME_INFINITE) && chVTIsArmedI(&vt))
+ chVTResetI(&vt);
+
+ return chThdSelf()->p_u.rdymsg;
+}
+
+#endif /* HAL_USE_I2C */
+
+/** @} */
diff --git a/os/hal/platforms/STM32/I2Cv2/i2c_lld.h b/os/hal/platforms/STM32/I2Cv2/i2c_lld.h new file mode 100644 index 000000000..810c7be84 --- /dev/null +++ b/os/hal/platforms/STM32/I2Cv2/i2c_lld.h @@ -0,0 +1,338 @@ +/*
+ ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+/*
+ Concepts and parts of this file have been contributed by Uladzimir Pylinsky
+ aka barthess.
+ */
+
+/**
+ * @file STM32/I2Cv2/i2c_lld.h
+ * @brief STM32 I2C subsystem low level driver header.
+ *
+ * @addtogroup I2C
+ * @{
+ */
+
+#ifndef _I2C_LLD_H_
+#define _I2C_LLD_H_
+
+#if HAL_USE_I2C || defined(__DOXYGEN__)
+
+/*===========================================================================*/
+/* Driver constants. */
+/*===========================================================================*/
+
+/**
+ * @name TIMINGR register definitions
+ * @{
+ */
+#define STM32_TIMINGR_PRESC_MASK (15U << 28)
+#define STM32_TIMINGR_PRESC(n) ((n) << 28)
+#define STM32_TIMINGR_SCLDEL_MASK (15U << 20)
+#define STM32_TIMINGR_SCLDEL(n) ((n) << 20)
+#define STM32_TIMINGR_SDADEL_MASK (15U << 16)
+#define STM32_TIMINGR_SDADEL(n) ((n) << 16)
+#define STM32_TIMINGR_SCLH_MASK (255U << 8)
+#define STM32_TIMINGR_SCLH(n) ((n) << 8)
+#define STM32_TIMINGR_SCLL_MASK (255U << 0)
+#define STM32_TIMINGR_SCLL(n) ((n) << 0)
+/** @} */
+
+/*===========================================================================*/
+/* Driver pre-compile time settings. */
+/*===========================================================================*/
+
+/**
+ * @name Configuration options
+ * @{
+ */
+/**
+ * @brief I2C1 driver enable switch.
+ * @details If set to @p TRUE the support for I2C1 is included.
+ * @note The default is @p FALSE.
+ */
+#if !defined(STM32_I2C_USE_I2C1) || defined(__DOXYGEN__)
+#define STM32_I2C_USE_I2C1 FALSE
+#endif
+
+/**
+ * @brief I2C2 driver enable switch.
+ * @details If set to @p TRUE the support for I2C2 is included.
+ * @note The default is @p FALSE.
+ */
+#if !defined(STM32_I2C_USE_I2C2) || defined(__DOXYGEN__)
+#define STM32_I2C_USE_I2C2 FALSE
+#endif
+
+/**
+ * @brief I2C1 interrupt priority level setting.
+ */
+#if !defined(STM32_I2C_I2C1_IRQ_PRIORITY) || defined(__DOXYGEN__)
+#define STM32_I2C_I2C1_IRQ_PRIORITY 10
+#endif
+
+/**
+ * @brief I2C2 interrupt priority level setting.
+ */
+#if !defined(STM32_I2C_I2C2_IRQ_PRIORITY) || defined(__DOXYGEN__)
+#define STM32_I2C_I2C2_IRQ_PRIORITY 10
+#endif
+
+/**
+ * @brief I2C1 DMA priority (0..3|lowest..highest).
+ * @note The priority level is used for both the TX and RX DMA streams but
+ * because of the streams ordering the RX stream has always priority
+ * over the TX stream.
+ */
+#if !defined(STM32_I2C_I2C1_DMA_PRIORITY) || defined(__DOXYGEN__)
+#define STM32_I2C_I2C1_DMA_PRIORITY 1
+#endif
+
+/**
+ * @brief I2C2 DMA priority (0..3|lowest..highest).
+ * @note The priority level is used for both the TX and RX DMA streams but
+ * because of the streams ordering the RX stream has always priority
+ * over the TX stream.
+ */
+#if !defined(STM32_I2C_I2C2_DMA_PRIORITY) || defined(__DOXYGEN__)
+#define STM32_I2C_I2C2_DMA_PRIORITY 1
+#endif
+
+/**
+ * @brief I2C DMA error hook.
+ * @note The default action for DMA errors is a system halt because DMA
+ * error can only happen because programming errors.
+ */
+#if !defined(STM32_I2C_DMA_ERROR_HOOK) || defined(__DOXYGEN__)
+#define STM32_I2C_DMA_ERROR_HOOK(i2cp) chSysHalt()
+#endif
+/** @} */
+
+/*===========================================================================*/
+/* Derived constants and error checks. */
+/*===========================================================================*/
+
+/* Streams for the DMA peripheral.*/
+#if defined(STM32F0XX)
+#define STM32_I2C_I2C1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3)
+#define STM32_I2C_I2C1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2)
+#define STM32_I2C_I2C2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5)
+#define STM32_I2C_I2C2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4)
+
+#elif defined(STM32F30X) || defined(STM32F37X)
+#define STM32_I2C_I2C1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7)
+#define STM32_I2C_I2C1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6)
+#define STM32_I2C_I2C2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5)
+#define STM32_I2C_I2C2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4)
+
+#else
+#error "device unsupported by I2Cv2 driver"
+#endif
+
+/** @brief error checks */
+#if STM32_I2C_USE_I2C1 && !STM32_HAS_I2C1
+#error "I2C1 not present in the selected device"
+#endif
+
+#if STM32_I2C_USE_I2C2 && !STM32_HAS_I2C2
+#error "I2C2 not present in the selected device"
+#endif
+
+#if !STM32_I2C_USE_I2C1 && !STM32_I2C_USE_I2C2
+#error "I2C driver activated but no I2C peripheral assigned"
+#endif
+
+#if STM32_I2C_USE_I2C1 && \
+ !STM32_DMA_IS_VALID_ID(STM32_I2C_I2C1_RX_DMA_STREAM, \
+ STM32_I2C1_RX_DMA_MSK)
+#error "invalid DMA stream associated to I2C1 RX"
+#endif
+
+#if STM32_I2C_USE_I2C1 && \
+ !STM32_DMA_IS_VALID_ID(STM32_I2C_I2C1_TX_DMA_STREAM, \
+ STM32_I2C1_TX_DMA_MSK)
+#error "invalid DMA stream associated to I2C1 TX"
+#endif
+
+#if STM32_I2C_USE_I2C2 && \
+ !STM32_DMA_IS_VALID_ID(STM32_I2C_I2C2_RX_DMA_STREAM, \
+ STM32_I2C2_RX_DMA_MSK)
+#error "invalid DMA stream associated to I2C2 RX"
+#endif
+
+#if STM32_I2C_USE_I2C2 && \
+ !STM32_DMA_IS_VALID_ID(STM32_I2C_I2C2_TX_DMA_STREAM, \
+ STM32_I2C2_TX_DMA_MSK)
+#error "invalid DMA stream associated to I2C2 TX"
+#endif
+
+#if !defined(STM32_DMA_REQUIRED)
+#define STM32_DMA_REQUIRED
+#endif
+
+/* Check clock range. */
+
+/*===========================================================================*/
+/* Driver data structures and types. */
+/*===========================================================================*/
+
+/**
+ * @brief Type representing I2C address.
+ */
+typedef uint16_t i2caddr_t;
+
+/**
+ * @brief I2C Driver condition flags type.
+ */
+typedef uint32_t i2cflags_t;
+
+/**
+ * @brief Driver configuration structure.
+ */
+typedef struct {
+ /**
+ * @brief TIMINGR register initialization.
+ * @note Refer to the STM32 reference manual, the values are affected
+ * by the system clock settings in mcuconf.h.
+ */
+ uint32_t timingr;
+ /**
+ * @brief CR1 register initialization.
+ * @note Leave to zero unless you know what you are doing.
+ */
+ uint32_t cr1;
+ /**
+ * @brief CR2 register initialization.
+ * @note Only the ADD10 bit can eventually be specified here.
+ */
+ uint32_t cr2;
+} I2CConfig;
+
+/**
+ * @brief Type of a structure representing an I2C driver.
+ */
+typedef struct I2CDriver I2CDriver;
+
+/**
+ * @brief Structure representing an I2C driver.
+ */
+struct I2CDriver{
+ /**
+ * @brief Driver state.
+ */
+ i2cstate_t state;
+ /**
+ * @brief Current configuration data.
+ */
+ const I2CConfig *config;
+ /**
+ * @brief Error flags.
+ */
+ i2cflags_t errors;
+#if I2C_USE_MUTUAL_EXCLUSION || defined(__DOXYGEN__)
+#if CH_USE_MUTEXES || defined(__DOXYGEN__)
+ /**
+ * @brief Mutex protecting the bus.
+ */
+ Mutex mutex;
+#elif CH_USE_SEMAPHORES
+ Semaphore semaphore;
+#endif
+#endif /* I2C_USE_MUTUAL_EXCLUSION */
+#if defined(I2C_DRIVER_EXT_FIELDS)
+ I2C_DRIVER_EXT_FIELDS
+#endif
+ /* End of the mandatory fields.*/
+ /**
+ * @brief Thread waiting for I/O completion.
+ */
+ Thread *thread;
+ /**
+ * @brief Current slave address without R/W bit.
+ */
+ i2caddr_t addr;
+ /**
+ * @brief RX DMA mode bit mask.
+ */
+ uint32_t rxdmamode;
+ /**
+ * @brief TX DMA mode bit mask.
+ */
+ uint32_t txdmamode;
+ /**
+ * @brief Receive DMA channel.
+ */
+ const stm32_dma_stream_t *dmarx;
+ /**
+ * @brief Transmit DMA channel.
+ */
+ const stm32_dma_stream_t *dmatx;
+ /**
+ * @brief Pointer to the I2Cx registers block.
+ */
+ I2C_TypeDef *i2c;
+};
+
+/*===========================================================================*/
+/* Driver macros. */
+/*===========================================================================*/
+
+/**
+ * @brief Get errors from I2C driver.
+ *
+ * @param[in] i2cp pointer to the @p I2CDriver object
+ *
+ * @notapi
+ */
+#define i2c_lld_get_errors(i2cp) ((i2cp)->errors)
+
+/*===========================================================================*/
+/* External declarations. */
+/*===========================================================================*/
+
+#if !defined(__DOXYGEN__)
+#if STM32_I2C_USE_I2C1
+extern I2CDriver I2CD1;
+#endif
+
+#if STM32_I2C_USE_I2C2
+extern I2CDriver I2CD2;
+#endif
+
+#endif /* !defined(__DOXYGEN__) */
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+ void i2c_lld_init(void);
+ void i2c_lld_start(I2CDriver *i2cp);
+ void i2c_lld_stop(I2CDriver *i2cp);
+ msg_t i2c_lld_master_transmit_timeout(I2CDriver *i2cp, i2caddr_t addr,
+ const uint8_t *txbuf, size_t txbytes,
+ uint8_t *rxbuf, size_t rxbytes,
+ systime_t timeout);
+ msg_t i2c_lld_master_receive_timeout(I2CDriver *i2cp, i2caddr_t addr,
+ uint8_t *rxbuf, size_t rxbytes,
+ systime_t timeout);
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* HAL_USE_I2C */
+
+#endif /* _I2C_LLD_H_ */
+
+/** @} */
diff --git a/os/hal/platforms/STM32/OTGv1/stm32_otg.h b/os/hal/platforms/STM32/OTGv1/stm32_otg.h new file mode 100644 index 000000000..a78ba57e4 --- /dev/null +++ b/os/hal/platforms/STM32/OTGv1/stm32_otg.h @@ -0,0 +1,916 @@ +/*
+ ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+/**
+ * @file stm32_otg.h
+ * @brief STM32 OTG registers layout header.
+ *
+ * @addtogroup USB
+ * @{
+ */
+
+#ifndef _STM32_OTG_H_
+#define _STM32_OTG_H_
+
+/**
+ * @brief Number of the implemented endpoints in OTG_FS.
+ * @details This value does not include the endpoint 0 that is always present.
+ */
+#define STM32_OTG1_ENDOPOINTS_NUMBER 3
+
+/**
+ * @brief Number of the implemented endpoints in OTG_HS.
+ * @details This value does not include the endpoint 0 that is always present.
+ */
+#define STM32_OTG2_ENDOPOINTS_NUMBER 5
+
+/**
+ * @brief OTG_FS FIFO memory size in words.
+ */
+#define STM32_OTG1_FIFO_MEM_SIZE 384
+
+/**
+ * @brief OTG_HS FIFO memory size in words.
+ */
+#define STM32_OTG2_FIFO_MEM_SIZE 1024
+
+/**
+ * @brief Host channel registers group.
+ */
+typedef struct {
+ volatile uint32_t HCCHAR; /**< @brief Host channel characteristics
+ register. */
+ volatile uint32_t resvd8;
+ volatile uint32_t HCINT; /**< @brief Host channel interrupt register.*/
+ volatile uint32_t HCINTMSK; /**< @brief Host channel interrupt mask
+ register. */
+ volatile uint32_t HCTSIZ; /**< @brief Host channel transfer size
+ register. */
+ volatile uint32_t resvd14;
+ volatile uint32_t resvd18;
+ volatile uint32_t resvd1c;
+} stm32_otg_host_chn_t;
+
+/**
+ * @brief Device input endpoint registers group.
+ */
+typedef struct {
+ volatile uint32_t DIEPCTL; /**< @brief Device control IN endpoint
+ control register. */
+ volatile uint32_t resvd4;
+ volatile uint32_t DIEPINT; /**< @brief Device IN endpoint interrupt
+ register. */
+ volatile uint32_t resvdC;
+ volatile uint32_t DIEPTSIZ; /**< @brief Device IN endpoint transfer size
+ register. */
+ volatile uint32_t resvd14;
+ volatile uint32_t DTXFSTS; /**< @brief Device IN endpoint transmit FIFO
+ status register. */
+ volatile uint32_t resvd1C;
+} stm32_otg_in_ep_t;
+
+/**
+ * @brief Device output endpoint registers group.
+ */
+typedef struct {
+ volatile uint32_t DOEPCTL; /**< @brief Device control OUT endpoint
+ control register. */
+ volatile uint32_t resvd4;
+ volatile uint32_t DOEPINT; /**< @brief Device OUT endpoint interrupt
+ register. */
+ volatile uint32_t resvdC;
+ volatile uint32_t DOEPTSIZ; /**< @brief Device OUT endpoint transfer
+ size register. */
+ volatile uint32_t resvd14;
+ volatile uint32_t resvd18;
+ volatile uint32_t resvd1C;
+} stm32_otg_out_ep_t;
+
+/**
+ * @brief USB registers memory map.
+ */
+typedef struct {
+ volatile uint32_t GOTGCTL; /**< @brief OTG control and status register.*/
+ volatile uint32_t GOTGINT; /**< @brief OTG interrupt register. */
+ volatile uint32_t GAHBCFG; /**< @brief AHB configuration register. */
+ volatile uint32_t GUSBCFG; /**< @brief USB configuration register. */
+ volatile uint32_t GRSTCTL; /**< @brief Reset register size. */
+ volatile uint32_t GINTSTS; /**< @brief Interrupt register. */
+ volatile uint32_t GINTMSK; /**< @brief Interrupt mask register. */
+ volatile uint32_t GRXSTSR; /**< @brief Receive status debug read
+ register. */
+ volatile uint32_t GRXSTSP; /**< @brief Receive status read/pop
+ register. */
+ volatile uint32_t GRXFSIZ; /**< @brief Receive FIFO size register. */
+ volatile uint32_t DIEPTXF0; /**< @brief Endpoint 0 transmit FIFO size
+ register. */
+ volatile uint32_t HNPTXSTS; /**< @brief Non-periodic transmit FIFO/queue
+ status register. */
+ volatile uint32_t resvd30;
+ volatile uint32_t resvd34;
+ volatile uint32_t GCCFG; /**< @brief General core configuration. */
+ volatile uint32_t CID; /**< @brief Core ID register. */
+ volatile uint32_t resvd58[48];
+ volatile uint32_t HPTXFSIZ; /**< @brief Host periodic transmit FIFO size
+ register. */
+ volatile uint32_t DIEPTXF[15];/**< @brief Device IN endpoint transmit FIFO
+ size registers. */
+ volatile uint32_t resvd140[176];
+ volatile uint32_t HCFG; /**< @brief Host configuration register. */
+ volatile uint32_t HFIR; /**< @brief Host frame interval register. */
+ volatile uint32_t HFNUM; /**< @brief Host frame number/frame time
+ Remaining register. */
+ volatile uint32_t resvd40C;
+ volatile uint32_t HPTXSTS; /**< @brief Host periodic transmit FIFO/queue
+ status register. */
+ volatile uint32_t HAINT; /**< @brief Host all channels interrupt
+ register. */
+ volatile uint32_t HAINTMSK; /**< @brief Host all channels interrupt mask
+ register. */
+ volatile uint32_t resvd41C[9];
+ volatile uint32_t HPRT; /**< @brief Host port control and status
+ register. */
+ volatile uint32_t resvd444[47];
+ stm32_otg_host_chn_t hc[16]; /**< @brief Host channels array. */
+ volatile uint32_t resvd700[64];
+ volatile uint32_t DCFG; /**< @brief Device configuration register. */
+ volatile uint32_t DCTL; /**< @brief Device control register. */
+ volatile uint32_t DSTS; /**< @brief Device status register. */
+ volatile uint32_t resvd80C;
+ volatile uint32_t DIEPMSK; /**< @brief Device IN endpoint common
+ interrupt mask register. */
+ volatile uint32_t DOEPMSK; /**< @brief Device OUT endpoint common
+ interrupt mask register. */
+ volatile uint32_t DAINT; /**< @brief Device all endpoints interrupt
+ register. */
+ volatile uint32_t DAINTMSK; /**< @brief Device all endpoints interrupt
+ mask register. */
+ volatile uint32_t resvd820;
+ volatile uint32_t resvd824;
+ volatile uint32_t DVBUSDIS; /**< @brief Device VBUS discharge time
+ register. */
+ volatile uint32_t DVBUSPULSE; /**< @brief Device VBUS pulsing time
+ register. */
+ volatile uint32_t resvd830;
+ volatile uint32_t DIEPEMPMSK; /**< @brief Device IN endpoint FIFO empty
+ interrupt mask register. */
+ volatile uint32_t resvd838;
+ volatile uint32_t resvd83C;
+ volatile uint32_t resvd840[16];
+ volatile uint32_t resvd880[16];
+ volatile uint32_t resvd8C0[16];
+ stm32_otg_in_ep_t ie[16]; /**< @brief Input endpoints. */
+ stm32_otg_out_ep_t oe[16]; /**< @brief Output endpoints. */
+ volatile uint32_t resvdD00[64];
+ volatile uint32_t PCGCCTL; /**< @brief Power and clock gating control
+ register. */
+ volatile uint32_t resvdE04[127];
+ volatile uint32_t FIFO[16][1024];
+} stm32_otg_t;
+
+/**
+ * @name GOTGCTL register bit definitions
+ * @{
+ */
+#define GOTGCTL_BSVLD (1U<<19) /**< B-Session Valid. */
+#define GOTGCTL_ASVLD (1U<<18) /**< A-Session Valid. */
+#define GOTGCTL_DBCT (1U<<17) /**< Long/Short debounce time. */
+#define GOTGCTL_CIDSTS (1U<<16) /**< Connector ID status. */
+#define GOTGCTL_DHNPEN (1U<<11) /**< Device HNP enabled. */
+#define GOTGCTL_HSHNPEN (1U<<10) /**< Host Set HNP enable. */
+#define GOTGCTL_HNPRQ (1U<<9) /**< HNP request. */
+#define GOTGCTL_HNGSCS (1U<<8) /**< Host negotiation success. */
+#define GOTGCTL_SRQ (1U<<1) /**< Session request. */
+#define GOTGCTL_SRQSCS (1U<<0) /**< Session request success. */
+/** @} */
+
+/**
+ * @name GOTGINT register bit definitions
+ * @{
+ */
+#define GOTGINT_DBCDNE (1U<<19) /**< Debounce done. */
+#define GOTGINT_ADTOCHG (1U<<18) /**< A-Device timeout change. */
+#define GOTGINT_HNGDET (1U<<17) /**< Host negotiation detected. */
+#define GOTGINT_HNSSCHG (1U<<9) /**< Host negotiation success
+ status change. */
+#define GOTGINT_SRSSCHG (1U<<8) /**< Session request success
+ status change. */
+#define GOTGINT_SEDET (1U<<2) /**< Session end detected. */
+/** @} */
+
+/**
+ * @name GAHBCFG register bit definitions
+ * @{
+ */
+#define GAHBCFG_PTXFELVL (1U<<8) /**< Periodic TxFIFO empty
+ level. */
+#define GAHBCFG_TXFELVL (1U<<7) /**< Non-periodic TxFIFO empty
+ level. */
+#define GAHBCFG_DMAEN (1U<<5) /**< DMA enable (HS only). */
+#define GAHBCFG_HBSTLEN_MASK (15U<<1) /**< Burst length/type mask (HS
+ only). */
+#define GAHBCFG_HBSTLEN(n) ((n)<<1) /**< Burst length/type (HS
+ only). */
+#define GAHBCFG_GINTMSK (1U<<0) /**< Global interrupt mask. */
+/** @} */
+
+/**
+ * @name GUSBCFG register bit definitions
+ * @{
+ */
+#define GUSBCFG_CTXPKT (1U<<31) /**< Corrupt Tx packet. */
+#define GUSBCFG_FDMOD (1U<<30) /**< Force Device Mode. */
+#define GUSBCFG_FHMOD (1U<<29) /**< Force Host Mode. */
+#define GUSBCFG_TRDT_MASK (15U<<10) /**< USB Turnaround time field
+ mask. */
+#define GUSBCFG_TRDT(n) ((n)<<10) /**< USB Turnaround time field
+ value. */
+#define GUSBCFG_HNPCAP (1U<<9) /**< HNP-Capable. */
+#define GUSBCFG_SRPCAP (1U<<8) /**< SRP-Capable. */
+#define GUSBCFG_PHYSEL (1U<<6) /**< USB 2.0 High-Speed PHY or
+ USB 1.1 Full-Speed serial
+ transceiver Select. */
+#define GUSBCFG_TOCAL_MASK (7U<<0) /**< HS/FS timeout calibration
+ field mask. */
+#define GUSBCFG_TOCAL(n) ((n)<<0) /**< HS/FS timeout calibration
+ field value. */
+/** @} */
+
+/**
+ * @name GRSTCTL register bit definitions
+ * @{
+ */
+#define GRSTCTL_AHBIDL (1U<<31) /**< AHB Master Idle. */
+#define GRSTCTL_TXFNUM_MASK (31U<<6) /**< TxFIFO number field mask. */
+#define GRSTCTL_TXFNUM(n) ((n)<<6) /**< TxFIFO number field value. */
+#define GRSTCTL_TXFFLSH (1U<<5) /**< TxFIFO flush. */
+#define GRSTCTL_RXFFLSH (1U<<4) /**< RxFIFO flush. */
+#define GRSTCTL_FCRST (1U<<2) /**< Host frame counter reset. */
+#define GRSTCTL_HSRST (1U<<1) /**< HClk soft reset. */
+#define GRSTCTL_CSRST (1U<<0) /**< Core soft reset. */
+/** @} */
+
+/**
+ * @name GINTSTS register bit definitions
+ * @{
+ */
+#define GINTSTS_WKUPINT (1U<<31) /**< Resume/Remote wakeup
+ detected interrupt. */
+#define GINTSTS_SRQINT (1U<<30) /**< Session request/New session
+ detected interrupt. */
+#define GINTSTS_DISCINT (1U<<29) /**< Disconnect detected
+ interrupt. */
+#define GINTSTS_CIDSCHG (1U<<28) /**< Connector ID status change.*/
+#define GINTSTS_PTXFE (1U<<26) /**< Periodic TxFIFO empty. */
+#define GINTSTS_HCINT (1U<<25) /**< Host channels interrupt. */
+#define GINTSTS_HPRTINT (1U<<24) /**< Host port interrupt. */
+#define GINTSTS_IPXFR (1U<<21) /**< Incomplete periodic
+ transfer. */
+#define GINTSTS_IISOOXFR (1U<<21) /**< Incomplete isochronous OUT
+ transfer. */
+#define GINTSTS_IISOIXFR (1U<<20) /**< Incomplete isochronous IN
+ transfer. */
+#define GINTSTS_OEPINT (1U<<19) /**< OUT endpoints interrupt. */
+#define GINTSTS_IEPINT (1U<<18) /**< IN endpoints interrupt. */
+#define GINTSTS_EOPF (1U<<15) /**< End of periodic frame
+ interrupt. */
+#define GINTSTS_ISOODRP (1U<<14) /**< Isochronous OUT packet
+ dropped interrupt. */
+#define GINTSTS_ENUMDNE (1U<<13) /**< Enumeration done. */
+#define GINTSTS_USBRST (1U<<12) /**< USB reset. */
+#define GINTSTS_USBSUSP (1U<<11) /**< USB suspend. */
+#define GINTSTS_ESUSP (1U<<10) /**< Early suspend. */
+#define GINTSTS_GONAKEFF (1U<<7) /**< Global OUT NAK effective. */
+#define GINTSTS_GINAKEFF (1U<<6) /**< Global IN non-periodic NAK
+ effective. */
+#define GINTSTS_NPTXFE (1U<<5) /**< Non-periodic TxFIFO empty. */
+#define GINTSTS_RXFLVL (1U<<4) /**< RxFIFO non-empty. */
+#define GINTSTS_SOF (1U<<3) /**< Start of frame. */
+#define GINTSTS_OTGINT (1U<<2) /**< OTG interrupt. */
+#define GINTSTS_MMIS (1U<<1) /**< Mode Mismatch interrupt. */
+#define GINTSTS_CMOD (1U<<0) /**< Current mode of operation. */
+/** @} */
+
+/**
+ * @name GINTMSK register bit definitions
+ * @{
+ */
+#define GINTMSK_WKUM (1U<<31) /**< Resume/remote wakeup
+ detected interrupt mask. */
+#define GINTMSK_SRQM (1U<<30) /**< Session request/New session
+ detected interrupt mask. */
+#define GINTMSK_DISCM (1U<<29) /**< Disconnect detected
+ interrupt mask. */
+#define GINTMSK_CIDSCHGM (1U<<28) /**< Connector ID status change
+ mask. */
+#define GINTMSK_PTXFEM (1U<<26) /**< Periodic TxFIFO empty mask.*/
+#define GINTMSK_HCM (1U<<25) /**< Host channels interrupt
+ mask. */
+#define GINTMSK_HPRTM (1U<<24) /**< Host port interrupt mask. */
+#define GINTMSK_IPXFRM (1U<<21) /**< Incomplete periodic
+ transfer mask. */
+#define GINTMSK_IISOOXFRM (1U<<21) /**< Incomplete isochronous OUT
+ transfer mask. */
+#define GINTMSK_IISOIXFRM (1U<<20) /**< Incomplete isochronous IN
+ transfer mask. */
+#define GINTMSK_OEPM (1U<<19) /**< OUT endpoints interrupt
+ mask. */
+#define GINTMSK_IEPM (1U<<18) /**< IN endpoints interrupt
+ mask. */
+#define GINTMSK_EOPFM (1U<<15) /**< End of periodic frame
+ interrupt mask. */
+#define GINTMSK_ISOODRPM (1U<<14) /**< Isochronous OUT packet
+ dropped interrupt mask. */
+#define GINTMSK_ENUMDNEM (1U<<13) /**< Enumeration done mask. */
+#define GINTMSK_USBRSTM (1U<<12) /**< USB reset mask. */
+#define GINTMSK_USBSUSPM (1U<<11) /**< USB suspend mask. */
+#define GINTMSK_ESUSPM (1U<<10) /**< Early suspend mask. */
+#define GINTMSK_GONAKEFFM (1U<<7) /**< Global OUT NAK effective
+ mask. */
+#define GINTMSK_GINAKEFFM (1U<<6) /**< Global non-periodic IN NAK
+ effective mask. */
+#define GINTMSK_NPTXFEM (1U<<5) /**< Non-periodic TxFIFO empty
+ mask. */
+#define GINTMSK_RXFLVLM (1U<<4) /**< Receive FIFO non-empty
+ mask. */
+#define GINTMSK_SOFM (1U<<3) /**< Start of (micro)frame mask.*/
+#define GINTMSK_OTGM (1U<<2) /**< OTG interrupt mask. */
+#define GINTMSK_MMISM (1U<<1) /**< Mode Mismatch interrupt
+ mask. */
+/** @} */
+
+/**
+ * @name GRXSTSR register bit definitions
+ * @{
+ */
+#define GRXSTSR_PKTSTS_MASK (15U<<17) /**< Packet status mask. */
+#define GRXSTSR_PKTSTS(n) ((n)<<17) /**< Packet status value. */
+#define GRXSTSR_OUT_GLOBAL_NAK GRXSTSR_PKTSTS(1)
+#define GRXSTSR_OUT_DATA GRXSTSR_PKTSTS(2)
+#define GRXSTSR_OUT_COMP GRXSTSR_PKTSTS(3)
+#define GRXSTSR_SETUP_COMP GRXSTSR_PKTSTS(4)
+#define GRXSTSR_SETUP_DATA GRXSTSR_PKTSTS(6)
+#define GRXSTSR_DPID_MASK (3U<<15) /**< Data PID mask. */
+#define GRXSTSR_DPID(n) ((n)<<15) /**< Data PID value. */
+#define GRXSTSR_BCNT_MASK (0x7FF<<4) /**< Byte count mask. */
+#define GRXSTSR_BCNT(n) ((n)<<4) /**< Byte count value. */
+#define GRXSTSR_CHNUM_MASK (15U<<0) /**< Channel number mask. */
+#define GRXSTSR_CHNUM(n) ((n)<<0) /**< Channel number value. */
+#define GRXSTSR_EPNUM_MASK (15U<<0) /**< Endpoint number mask. */
+#define GRXSTSR_EPNUM(n) ((n)<<0) /**< Endpoint number value. */
+/** @} */
+
+/**
+ * @name GRXSTSP register bit definitions
+ * @{
+ */
+#define GRXSTSP_PKTSTS_MASK (15<<17) /**< Packet status mask. */
+#define GRXSTSP_PKTSTS(n) ((n)<<17) /**< Packet status value. */
+#define GRXSTSP_OUT_GLOBAL_NAK GRXSTSP_PKTSTS(1)
+#define GRXSTSP_OUT_DATA GRXSTSP_PKTSTS(2)
+#define GRXSTSP_OUT_COMP GRXSTSP_PKTSTS(3)
+#define GRXSTSP_SETUP_COMP GRXSTSP_PKTSTS(4)
+#define GRXSTSP_SETUP_DATA GRXSTSP_PKTSTS(6)
+#define GRXSTSP_DPID_MASK (3U<<15) /**< Data PID mask. */
+#define GRXSTSP_DPID(n) ((n)<<15) /**< Data PID value. */
+#define GRXSTSP_BCNT_MASK (0x7FF<<4) /**< Byte count mask. */
+#define GRXSTSP_BCNT_OFF 4 /**< Byte count offset. */
+#define GRXSTSP_BCNT(n) ((n)<<4) /**< Byte count value. */
+#define GRXSTSP_CHNUM_MASK (15U<<0) /**< Channel number mask. */
+#define GRXSTSP_CHNUM(n) ((n)<<0) /**< Channel number value. */
+#define GRXSTSP_EPNUM_MASK (15U<<0) /**< Endpoint number mask. */
+#define GRXSTSP_EPNUM_OFF 0 /**< Endpoint number offset. */
+#define GRXSTSP_EPNUM(n) ((n)<<0) /**< Endpoint number value. */
+/** @} */
+
+/**
+ * @name GRXFSIZ register bit definitions
+ * @{
+ */
+#define GRXFSIZ_RXFD_MASK (0xFFFF<<0) /**< RxFIFO depth mask. */
+#define GRXFSIZ_RXFD(n) ((n)<<0) /**< RxFIFO depth value. */
+/** @} */
+
+/**
+ * @name DIEPTXFx register bit definitions
+ * @{
+ */
+#define DIEPTXF_INEPTXFD_MASK (0xFFFFU<<16)/**< IN endpoint TxFIFO depth
+ mask. */
+#define DIEPTXF_INEPTXFD(n) ((n)<<16) /**< IN endpoint TxFIFO depth
+ value. */
+#define DIEPTXF_INEPTXSA_MASK (0xFFFF<<0) /**< IN endpoint FIFOx transmit
+ RAM start address mask. */
+#define DIEPTXF_INEPTXSA(n) ((n)<<0) /**< IN endpoint FIFOx transmit
+ RAM start address value. */
+/** @} */
+
+/**
+ * @name GCCFG register bit definitions
+ * @{
+ */
+#define GCCFG_NOVBUSSENS (1U<<21) /**< VBUS sensing disable. */
+#define GCCFG_SOFOUTEN (1U<<20) /**< SOF output enable. */
+#define GCCFG_VBUSBSEN (1U<<19) /**< Enable the VBUS sensing "B"
+ device. */
+#define GCCFG_VBUSASEN (1U<<18) /**< Enable the VBUS sensing "A"
+ device. */
+#define GCCFG_PWRDWN (1U<<16) /**< Power down. */
+/** @} */
+
+/**
+ * @name HPTXFSIZ register bit definitions
+ * @{
+ */
+#define HPTXFSIZ_PTXFD_MASK (0xFFFFU<<16)/**< Host periodic TxFIFO
+ depth mask. */
+#define HPTXFSIZ_PTXFD(n) ((n)<<16) /**< Host periodic TxFIFO
+ depth value. */
+#define HPTXFSIZ_PTXSA_MASK (0xFFFFU<<0)/**< Host periodic TxFIFO
+ Start address mask. */
+#define HPTXFSIZ_PTXSA(n) ((n)<<0) /**< Host periodic TxFIFO
+ start address value. */
+/** @} */
+
+/**
+ * @name HCFG register bit definitions
+ * @{
+ */
+#define HCFG_FSLSS (1U<<2) /**< FS- and LS-only support. */
+#define HCFG_FSLSPCS_MASK (3U<<0) /**< FS/LS PHY clock select
+ mask. */
+#define HCFG_FSLSPCS_48 (1U<<0) /**< PHY clock is running at
+ 48 MHz. */
+#define HCFG_FSLSPCS_6 (2U<<0) /**< PHY clock is running at
+ 6 MHz. */
+/** @} */
+
+/**
+ * @name HFIR register bit definitions
+ * @{
+ */
+#define HFIR_FRIVL_MASK (0xFFFFU<<0)/**< Frame interval mask. */
+#define HFIR_FRIVL(n) ((n)<<0) /**< Frame interval value. */
+/** @} */
+
+/**
+ * @name HFNUM register bit definitions
+ * @{
+ */
+#define HFNUM_FTREM_MASK (0xFFFFU<<16)/**< Frame time Remaining mask.*/
+#define HFNUM_FTREM(n) ((n)<<16) /**< Frame time Remaining value.*/
+#define HFNUM_FRNUM_MASK (0xFFFFU<<0)/**< Frame number mask. */
+#define HFNUM_FRNUM(n) ((n)<<0) /**< Frame number value. */
+/** @} */
+
+/**
+ * @name HPTXSTS register bit definitions
+ * @{
+ */
+#define HPTXSTS_PTXQTOP_MASK (0xFFU<<24) /**< Top of the periodic
+ transmit request queue
+ mask. */
+#define HPTXSTS_PTXQTOP(n) ((n)<<24) /**< Top of the periodic
+ transmit request queue
+ value. */
+#define HPTXSTS_PTXQSAV_MASK (0xFF<<16) /**< Periodic transmit request
+ queue Space Available
+ mask. */
+#define HPTXSTS_PTXQSAV(n) ((n)<<16) /**< Periodic transmit request
+ queue Space Available
+ value. */
+#define HPTXSTS_PTXFSAVL_MASK (0xFFFF<<0) /**< Periodic transmit Data
+ FIFO Space Available
+ mask. */
+#define HPTXSTS_PTXFSAVL(n) ((n)<<0) /**< Periodic transmit Data
+ FIFO Space Available
+ value. */
+/** @} */
+
+/**
+ * @name HAINT register bit definitions
+ * @{
+ */
+#define HAINT_HAINT_MASK (0xFFFFU<<0)/**< Channel interrupts mask. */
+#define HAINT_HAINT(n) ((n)<<0) /**< Channel interrupts value. */
+/** @} */
+
+/**
+ * @name HAINTMSK register bit definitions
+ * @{
+ */
+#define HAINTMSK_HAINTM_MASK (0xFFFFU<<0)/**< Channel interrupt mask
+ mask. */
+#define HAINTMSK_HAINTM(n) ((n)<<0) /**< Channel interrupt mask
+ value. */
+/** @} */
+
+/**
+ * @name HPRT register bit definitions
+ * @{
+ */
+#define HPRT_PSPD_MASK (3U<<17) /**< Port speed mask. */
+#define HPRT_PSPD_FS (1U<<17) /**< Full speed value. */
+#define HPRT_PSPD_LS (2U<<17) /**< Low speed value. */
+#define HPRT_PTCTL_MASK (15<<13) /**< Port Test control mask. */
+#define HPRT_PTCTL(n) ((n)<<13) /**< Port Test control value. */
+#define HPRT_PPWR (1U<<12) /**< Port power. */
+#define HPRT_PLSTS_MASK (3U<<11) /**< Port Line status mask. */
+#define HPRT_PLSTS_DM (1U<<11) /**< Logic level of D-. */
+#define HPRT_PLSTS_DP (1U<<10) /**< Logic level of D+. */
+#define HPRT_PRST (1U<<8) /**< Port reset. */
+#define HPRT_PSUSP (1U<<7) /**< Port suspend. */
+#define HPRT_PRES (1U<<6) /**< Port Resume. */
+#define HPRT_POCCHNG (1U<<5) /**< Port overcurrent change. */
+#define HPRT_POCA (1U<<4) /**< Port overcurrent active. */
+#define HPRT_PENCHNG (1U<<3) /**< Port enable/disable change.*/
+#define HPRT_PENA (1U<<2) /**< Port enable. */
+#define HPRT_PCDET (1U<<1) /**< Port Connect detected. */
+#define HPRT_PCSTS (1U<<0) /**< Port connect status. */
+/** @} */
+
+/**
+ * @name HCCHAR register bit definitions
+ * @{
+ */
+#define HCCHAR_CHENA (1U<<31) /**< Channel enable. */
+#define HCCHAR_CHDIS (1U<<30) /**< Channel Disable. */
+#define HCCHAR_ODDFRM (1U<<29) /**< Odd frame. */
+#define HCCHAR_DAD_MASK (0x7FU<<22) /**< Device Address mask. */
+#define HCCHAR_DAD(n) ((n)<<22) /**< Device Address value. */
+#define HCCHAR_MCNT_MASK (3U<<20) /**< Multicount mask. */
+#define HCCHAR_MCNT(n) ((n)<<20) /**< Multicount value. */
+#define HCCHAR_EPTYP_MASK (3U<<18) /**< Endpoint type mask. */
+#define HCCHAR_EPTYP(n) ((n)<<18) /**< Endpoint type value. */
+#define HCCHAR_EPTYP_CTL (0U<<18) /**< Control endpoint value. */
+#define HCCHAR_EPTYP_ISO (1U<<18) /**< Isochronous endpoint value.*/
+#define HCCHAR_EPTYP_BULK (2U<<18) /**< Bulk endpoint value. */
+#define HCCHAR_EPTYP_INTR (3U<<18) /**< Interrupt endpoint value. */
+#define HCCHAR_LSDEV (1U<<17) /**< Low-Speed device. */
+#define HCCHAR_EPDIR (1U<<15) /**< Endpoint direction. */
+#define HCCHAR_EPNUM_MASK (15U<<11) /**< Endpoint number mask. */
+#define HCCHAR_EPNUM(n) ((n)<<11) /**< Endpoint number value. */
+#define HCCHAR_MPS_MASK (11U<<0) /**< Maximum packet size mask. */
+#define HCCHAR_MPS(n) (11U<<0) /**< Maximum packet size value. */
+/** @} */
+
+/**
+ * @name HCINT register bit definitions
+ * @{
+ */
+#define HCINT_DTERR (1U<<10) /**< Data toggle error. */
+#define HCINT_FRMOR (1U<<9) /**< Frame overrun. */
+#define HCINT_BBERR (1U<<8) /**< Babble error. */
+#define HCINT_TRERR (1U<<7) /**< Transaction Error. */
+#define HCINT_ACK (1U<<5) /**< ACK response
+ received/transmitted
+ interrupt. */
+#define HCINT_NAK (1U<<4) /**< NAK response received
+ interrupt. */
+#define HCINT_STALL (1U<<3) /**< STALL response received
+ interrupt. */
+#define HCINT_CHH (1U<<1) /**< Channel halted. */
+#define HCINT_XFRC (1U<<0) /**< Transfer completed. */
+/** @} */
+
+/**
+ * @name HCINTMSK register bit definitions
+ * @{
+ */
+#define HCINTMSK_DTERRM (1U<<10) /**< Data toggle error mask. */
+#define HCINTMSK_FRMORM (1U<<9) /**< Frame overrun mask. */
+#define HCINTMSK_BBERRM (1U<<8) /**< Babble error mask. */
+#define HCINTMSK_TRERRM (1U<<7) /**< Transaction error mask. */
+#define HCINTMSK_NYET (1U<<6) /**< NYET response received
+ interrupt mask. */
+#define HCINTMSK_ACKM (1U<<5) /**< ACK Response
+ received/transmitted
+ interrupt mask. */
+#define HCINTMSK_NAKM (1U<<4) /**< NAK response received
+ interrupt mask. */
+#define HCINTMSK_STALLM (1U<<3) /**< STALL response received
+ interrupt mask. */
+#define HCINTMSK_CHHM (1U<<1) /**< Channel halted mask. */
+#define HCINTMSK_XFRCM (1U<<0) /**< Transfer completed mask. */
+/** @} */
+
+/**
+ * @name HCTSIZ register bit definitions
+ * @{
+ */
+#define HCTSIZ_DPID_MASK (3U<<29) /**< PID mask. */
+#define HCTSIZ_DPID_DATA0 (0U<<29) /**< DATA0. */
+#define HCTSIZ_DPID_DATA2 (1U<<29) /**< DATA2. */
+#define HCTSIZ_DPID_DATA1 (2U<<29) /**< DATA1. */
+#define HCTSIZ_DPID_MDATA (3U<<29) /**< MDATA. */
+#define HCTSIZ_PKTCNT_MASK (0x3FFU<<19)/**< Packet count mask. */
+#define HCTSIZ_PKTCNT(n) ((n)<<19) /**< Packet count value. */
+#define HCTSIZ_XFRSIZ_MASK (0x7FFFF<<0)/**< Transfer size mask. */
+#define HCTSIZ_XFRSIZ(n) ((n)<<0) /**< Transfer size value. */
+/** @} */
+
+/**
+ * @name DCFG register bit definitions
+ * @{
+ */
+#define DCFG_PFIVL_MASK (3U<<11) /**< Periodic frame interval
+ mask. */
+#define DCFG_PFIVL(n) ((n)<<11) /**< Periodic frame interval
+ value. */
+#define DCFG_DAD_MASK (0x7FU<<4) /**< Device address mask. */
+#define DCFG_DAD(n) ((n)<<4) /**< Device address value. */
+#define DCFG_NZLSOHSK (1U<<2) /**< Non-Zero-Length status
+ OUT handshake. */
+#define DCFG_DSPD_MASK (3U<<0) /**< Device speed mask. */
+#define DCFG_DSPD_HS (0U<<0) /**< High speed (USB 2.0). */
+#define DCFG_DSPD_HS_FS (1U<<0) /**< High speed (USB 2.0) in FS
+ mode. */
+#define DCFG_DSPD_FS11 (3U<<0) /**< Full speed (USB 1.1
+ transceiver clock is 48
+ MHz). */
+/** @} */
+
+/**
+ * @name DCTL register bit definitions
+ * @{
+ */
+#define DCTL_POPRGDNE (1U<<11) /**< Power-on programming done. */
+#define DCTL_CGONAK (1U<<10) /**< Clear global OUT NAK. */
+#define DCTL_SGONAK (1U<<9) /**< Set global OUT NAK. */
+#define DCTL_CGINAK (1U<<8) /**< Clear global non-periodic
+ IN NAK. */
+#define DCTL_SGINAK (1U<<7) /**< Set global non-periodic
+ IN NAK. */
+#define DCTL_TCTL_MASK (7U<<4) /**< Test control mask. */
+#define DCTL_TCTL(n) ((n)<<4 /**< Test control value. */
+#define DCTL_GONSTS (1U<<3) /**< Global OUT NAK status. */
+#define DCTL_GINSTS (1U<<2) /**< Global non-periodic IN
+ NAK status. */
+#define DCTL_SDIS (1U<<1) /**< Soft disconnect. */
+#define DCTL_RWUSIG (1U<<0) /**< Remote wakeup signaling. */
+/** @} */
+
+/**
+ * @name DSTS register bit definitions
+ * @{
+ */
+#define DSTS_FNSOF_MASK (0x3FFU<<8) /**< Frame number of the received
+ SOF mask. */
+#define DSTS_FNSOF(n) ((n)<<8) /**< Frame number of the received
+ SOF value. */
+#define DSTS_EERR (1U<<3) /**< Erratic error. */
+#define DSTS_ENUMSPD_MASK (3U<<1) /**< Enumerated speed mask. */
+#define DSTS_ENUMSPD_FS_48 (3U<<1) /**< Full speed (PHY clock is
+ running at 48 MHz). */
+#define DSTS_SUSPSTS (1U<<0) /**< Suspend status. */
+/** @} */
+
+/**
+ * @name DIEPMSK register bit definitions
+ * @{
+ */
+#define DIEPMSK_TXFEM (1U<<6) /**< Transmit FIFO empty mask. */
+#define DIEPMSK_INEPNEM (1U<<6) /**< IN endpoint NAK effective
+ mask. */
+#define DIEPMSK_ITTXFEMSK (1U<<4) /**< IN token received when
+ TxFIFO empty mask. */
+#define DIEPMSK_TOCM (1U<<3) /**< Timeout condition mask. */
+#define DIEPMSK_EPDM (1U<<1) /**< Endpoint disabled
+ interrupt mask. */
+#define DIEPMSK_XFRCM (1U<<0) /**< Transfer completed
+ interrupt mask. */
+/** @} */
+
+/**
+ * @name DOEPMSK register bit definitions
+ * @{
+ */
+#define DOEPMSK_OTEPDM (1U<<4) /**< OUT token received when
+ endpoint disabled mask. */
+#define DOEPMSK_STUPM (1U<<3) /**< SETUP phase done mask. */
+#define DOEPMSK_EPDM (1U<<1) /**< Endpoint disabled
+ interrupt mask. */
+#define DOEPMSK_XFRCM (1U<<0) /**< Transfer completed
+ interrupt mask. */
+/** @} */
+
+/**
+ * @name DAINT register bit definitions
+ * @{
+ */
+#define DAINT_OEPINT_MASK (0xFFFFU<<16)/**< OUT endpoint interrupt
+ bits mask. */
+#define DAINT_OEPINT(n) ((n)<<16) /**< OUT endpoint interrupt
+ bits value. */
+#define DAINT_IEPINT_MASK (0xFFFFU<<0)/**< IN endpoint interrupt
+ bits mask. */
+#define DAINT_IEPINT(n) ((n)<<0) /**< IN endpoint interrupt
+ bits value. */
+/** @} */
+
+/**
+ * @name DAINTMSK register bit definitions
+ * @{
+ */
+#define DAINTMSK_OEPM_MASK (0xFFFFU<<16)/**< OUT EP interrupt mask
+ bits mask. */
+#define DAINTMSK_OEPM(n) (1U<<(16+(n)))/**< OUT EP interrupt mask
+ bits value. */
+#define DAINTMSK_IEPM_MASK (0xFFFFU<<0)/**< IN EP interrupt mask
+ bits mask. */
+#define DAINTMSK_IEPM(n) (1U<<(n)) /**< IN EP interrupt mask
+ bits value. */
+/** @} */
+
+/**
+ * @name DVBUSDIS register bit definitions
+ * @{
+ */
+#define DVBUSDIS_VBUSDT_MASK (0xFFFFU<<0)/**< Device VBUS discharge
+ time mask. */
+#define DVBUSDIS_VBUSDT(n) ((n)<<0) /**< Device VBUS discharge
+ time value. */
+/** @} */
+
+/**
+ * @name DVBUSPULSE register bit definitions
+ * @{
+ */
+#define DVBUSPULSE_DVBUSP_MASK (0xFFFU<<0) /**< Device VBUSpulsing time
+ mask. */
+#define DVBUSPULSE_DVBUSP(n) ((n)<<0) /**< Device VBUS pulsing time
+ value. */
+/** @} */
+
+/**
+ * @name DIEPEMPMSK register bit definitions
+ * @{
+ */
+#define DIEPEMPMSK_INEPTXFEM(n) (1U<<(n)) /**< IN EP Tx FIFO empty
+ interrupt mask bit. */
+/** @} */
+
+/**
+ * @name DIEPCTL register bit definitions
+ * @{
+ */
+#define DIEPCTL_EPENA (1U<<31) /**< Endpoint enable. */
+#define DIEPCTL_EPDIS (1U<<30) /**< Endpoint disable. */
+#define DIEPCTL_SD1PID (1U<<29) /**< Set DATA1 PID. */
+#define DIEPCTL_SODDFRM (1U<<29) /**< Set odd frame. */
+#define DIEPCTL_SD0PID (1U<<28) /**< Set DATA0 PID. */
+#define DIEPCTL_SEVNFRM (1U<<28) /**< Set even frame. */
+#define DIEPCTL_SNAK (1U<<27) /**< Set NAK. */
+#define DIEPCTL_CNAK (1U<<26) /**< Clear NAK. */
+#define DIEPCTL_TXFNUM_MASK (15U<<22) /**< TxFIFO number mask. */
+#define DIEPCTL_TXFNUM(n) ((n)<<22) /**< TxFIFO number value. */
+#define DIEPCTL_STALL (1U<<21) /**< STALL handshake. */
+#define DIEPCTL_SNPM (1U<<20) /**< Snoop mode. */
+#define DIEPCTL_EPTYP_MASK (3<<18) /**< Endpoint type mask. */
+#define DIEPCTL_EPTYP_CTRL (0U<<18) /**< Control. */
+#define DIEPCTL_EPTYP_ISO (1U<<18) /**< Isochronous. */
+#define DIEPCTL_EPTYP_BULK (2U<<18) /**< Bulk. */
+#define DIEPCTL_EPTYP_INTR (3U<<18) /**< Interrupt. */
+#define DIEPCTL_NAKSTS (1U<<17) /**< NAK status. */
+#define DIEPCTL_EONUM (1U<<16) /**< Even/odd frame. */
+#define DIEPCTL_DPID (1U<<16) /**< Endpoint data PID. */
+#define DIEPCTL_USBAEP (1U<<15) /**< USB active endpoint. */
+#define DIEPCTL_MPSIZ_MASK (0x3FFU<<0) /**< Maximum Packet size mask. */
+#define DIEPCTL_MPSIZ(n) ((n)<<0) /**< Maximum Packet size value. */
+/** @} */
+
+/**
+ * @name DIEPINT register bit definitions
+ * @{
+ */
+#define DIEPINT_TXFE (1U<<7) /**< Transmit FIFO empty. */
+#define DIEPINT_INEPNE (1U<<6) /**< IN endpoint NAK effective. */
+#define DIEPINT_ITTXFE (1U<<4) /**< IN Token received when
+ TxFIFO is empty. */
+#define DIEPINT_TOC (1U<<3) /**< Timeout condition. */
+#define DIEPINT_EPDISD (1U<<1) /**< Endpoint disabled
+ interrupt. */
+#define DIEPINT_XFRC (1U<<0) /**< Transfer completed. */
+/** @} */
+
+/**
+ * @name DIEPTSIZ register bit definitions
+ * @{
+ */
+#define DIEPTSIZ_MCNT_MASK (3U<<29) /**< Multi count mask. */
+#define DIEPTSIZ_MCNT(n) ((n)<<29) /**< Multi count value. */
+#define DIEPTSIZ_PKTCNT_MASK (0x3FF<<19) /**< Packet count mask. */
+#define DIEPTSIZ_PKTCNT(n) ((n)<<19) /**< Packet count value. */
+#define DIEPTSIZ_XFRSIZ_MASK (0x7FFFFU<<0)/**< Transfer size mask. */
+#define DIEPTSIZ_XFRSIZ(n) ((n)<<0) /**< Transfer size value. */
+/** @} */
+
+/**
+ * @name DTXFSTS register bit definitions.
+ * @{
+ */
+#define DTXFSTS_INEPTFSAV_MASK (0xFFFF<<0) /**< IN endpoint TxFIFO space
+ available. */
+/** @} */
+
+/**
+ * @name DOEPCTL register bit definitions.
+ * @{
+ */
+#define DOEPCTL_EPENA (1U<<31) /**< Endpoint enable. */
+#define DOEPCTL_EPDIS (1U<<30) /**< Endpoint disable. */
+#define DOEPCTL_SD1PID (1U<<29) /**< Set DATA1 PID. */
+#define DOEPCTL_SODDFRM (1U<<29) /**< Set odd frame. */
+#define DOEPCTL_SD0PID (1U<<28) /**< Set DATA0 PID. */
+#define DOEPCTL_SEVNFRM (1U<<28) /**< Set even frame. */
+#define DOEPCTL_SNAK (1U<<27) /**< Set NAK. */
+#define DOEPCTL_CNAK (1U<<26) /**< Clear NAK. */
+#define DOEPCTL_STALL (1U<<21) /**< STALL handshake. */
+#define DOEPCTL_SNPM (1U<<20) /**< Snoop mode. */
+#define DOEPCTL_EPTYP_MASK (3U<<18) /**< Endpoint type mask. */
+#define DOEPCTL_EPTYP_CTRL (0U<<18) /**< Control. */
+#define DOEPCTL_EPTYP_ISO (1U<<18) /**< Isochronous. */
+#define DOEPCTL_EPTYP_BULK (2U<<18) /**< Bulk. */
+#define DOEPCTL_EPTYP_INTR (3U<<18) /**< Interrupt. */
+#define DOEPCTL_NAKSTS (1U<<17) /**< NAK status. */
+#define DOEPCTL_EONUM (1U<<16) /**< Even/odd frame. */
+#define DOEPCTL_DPID (1U<<16) /**< Endpoint data PID. */
+#define DOEPCTL_USBAEP (1U<<15) /**< USB active endpoint. */
+#define DOEPCTL_MPSIZ_MASK (0x3FFU<<0) /**< Maximum Packet size mask. */
+#define DOEPCTL_MPSIZ(n) ((n)<<0) /**< Maximum Packet size value. */
+/** @} */
+
+/**
+ * @name DOEPINT register bit definitions
+ * @{
+ */
+#define DOEPINT_B2BSTUP (1U<<6) /**< Back-to-back SETUP packets
+ received. */
+#define DOEPINT_OTEPDIS (1U<<4) /**< OUT token received when
+ endpoint disabled. */
+#define DOEPINT_STUP (1U<<3) /**< SETUP phase done. */
+#define DOEPINT_EPDISD (1U<<1) /**< Endpoint disabled
+ interrupt. */
+#define DOEPINT_XFRC (1U<<0) /**< Transfer completed
+ interrupt. */
+/** @} */
+
+/**
+ * @name DOEPTSIZ register bit definitions
+ * @{
+ */
+#define DOEPTSIZ_RXDPID_MASK (3U<<29) /**< Received data PID mask. */
+#define DOEPTSIZ_RXDPID(n) ((n)<<29) /**< Received data PID value. */
+#define DOEPTSIZ_STUPCNT_MASK (3U<<29) /**< SETUP packet count mask. */
+#define DOEPTSIZ_STUPCNT(n) ((n)<<29) /**< SETUP packet count value. */
+#define DOEPTSIZ_PKTCNT_MASK (0x3FFU<<19)/**< Packet count mask. */
+#define DOEPTSIZ_PKTCNT(n) ((n)<<19) /**< Packet count value. */
+#define DOEPTSIZ_XFRSIZ_MASK (0x7FFFFU<<0)/**< Transfer size mask. */
+#define DOEPTSIZ_XFRSIZ(n) ((n)<<0) /**< Transfer size value. */
+/** @} */
+
+/**
+ * @name PCGCCTL register bit definitions
+ * @{
+ */
+#define PCGCCTL_PHYSUSP (1U<<4) /**< PHY Suspended. */
+#define PCGCCTL_GATEHCLK (1U<<1) /**< Gate HCLK. */
+#define PCGCCTL_STPPCLK (1U<<0) /**< Stop PCLK. */
+/** @} */
+
+/**
+ * @brief OTG_FS registers block memory address.
+ */
+#define OTG_FS_ADDR 0x50000000
+
+/**
+ * @brief OTG_HS registers block memory address.
+ */
+#define OTG_HS_ADDR 0x40040000
+
+/**
+ * @brief Accesses to the OTG_FS registers block.
+ */
+#define OTG_FS ((stm32_otg_t *)OTG_FS_ADDR)
+
+/**
+ * @brief Accesses to the OTG_HS registers block.
+ */
+#define OTG_HS ((stm32_otg_t *)OTG_HS_ADDR)
+
+#endif /* _STM32_OTG_H_ */
+
+/** @} */
diff --git a/os/hal/platforms/STM32/OTGv1/usb_lld.c b/os/hal/platforms/STM32/OTGv1/usb_lld.c new file mode 100644 index 000000000..f6287a49c --- /dev/null +++ b/os/hal/platforms/STM32/OTGv1/usb_lld.c @@ -0,0 +1,1300 @@ +/*
+ ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+/**
+ * @file STM32/OTGv1/usb_lld.c
+ * @brief STM32 USB subsystem low level driver source.
+ *
+ * @addtogroup USB
+ * @{
+ */
+
+#include <string.h>
+
+#include "ch.h"
+#include "hal.h"
+
+#if HAL_USE_USB || defined(__DOXYGEN__)
+
+/*===========================================================================*/
+/* Driver local definitions. */
+/*===========================================================================*/
+
+#define TRDT_VALUE 5
+
+/*===========================================================================*/
+/* Driver exported variables. */
+/*===========================================================================*/
+
+/** @brief OTG_FS driver identifier.*/
+#if STM32_USB_USE_OTG1 || defined(__DOXYGEN__)
+USBDriver USBD1;
+#endif
+
+/** @brief OTG_HS driver identifier.*/
+#if STM32_USB_USE_OTG2 || defined(__DOXYGEN__)
+USBDriver USBD2;
+#endif
+
+/*===========================================================================*/
+/* Driver local variables and types. */
+/*===========================================================================*/
+
+/**
+ * @brief EP0 state.
+ * @note It is an union because IN and OUT endpoints are never used at the
+ * same time for EP0.
+ */
+static union {
+ /**
+ * @brief IN EP0 state.
+ */
+ USBInEndpointState in;
+ /**
+ * @brief OUT EP0 state.
+ */
+ USBOutEndpointState out;
+} ep0_state;
+
+/**
+ * @brief Buffer for the EP0 setup packets.
+ */
+static uint8_t ep0setup_buffer[8];
+
+/**
+ * @brief EP0 initialization structure.
+ */
+static const USBEndpointConfig ep0config = {
+ USB_EP_MODE_TYPE_CTRL,
+ _usb_ep0setup,
+ _usb_ep0in,
+ _usb_ep0out,
+ 0x40,
+ 0x40,
+ &ep0_state.in,
+ &ep0_state.out,
+ 1,
+ ep0setup_buffer
+};
+
+#if STM32_USB_USE_OTG1
+static const stm32_otg_params_t fsparams = {
+ STM32_USB_OTG1_RX_FIFO_SIZE / 4,
+ STM32_OTG1_FIFO_MEM_SIZE,
+ STM32_OTG1_ENDOPOINTS_NUMBER
+};
+#endif
+
+#if STM32_USB_USE_OTG2
+static const stm32_otg_params_t hsparams = {
+ STM32_USB_OTG2_RX_FIFO_SIZE / 4,
+ STM32_OTG2_FIFO_MEM_SIZE,
+ STM32_OTG2_ENDOPOINTS_NUMBER
+};
+#endif
+
+/*===========================================================================*/
+/* Driver local functions. */
+/*===========================================================================*/
+
+/**
+ * @brief Wakes up the pump thread.
+ *
+ * @param[in] usbp pointer to the @p USBDriver object
+ *
+ * @notapi
+ */
+static void usb_lld_wakeup_pump(USBDriver *usbp) {
+
+ if (usbp->thd_wait != NULL) {
+ chThdResumeI(usbp->thd_wait);
+ usbp->thd_wait = NULL;
+ }
+}
+
+static void otg_core_reset(USBDriver *usbp) {
+ stm32_otg_t *otgp = usbp->otg;
+
+ /* Core reset and delay of at least 3 PHY cycles.*/
+ otgp->GRSTCTL = GRSTCTL_CSRST;
+ while ((otgp->GRSTCTL & GRSTCTL_CSRST) != 0)
+ ;
+ halPolledDelay(12);
+ /* Wait AHB idle condition.*/
+ while ((otgp->GRSTCTL & GRSTCTL_AHBIDL) == 0)
+ ;
+}
+
+static void otg_disable_ep(USBDriver *usbp) {
+ stm32_otg_t *otgp = usbp->otg;
+ unsigned i;
+
+ for (i = 0; i <= usbp->otgparams->num_endpoints; i++) {
+ /* Disable only if enabled because this sentence in the manual:
+ "The application must set this bit only if Endpoint Enable is
+ already set for this endpoint".*/
+ if ((otgp->ie[i].DIEPCTL & DIEPCTL_EPENA) != 0) {
+ otgp->ie[i].DIEPCTL = DIEPCTL_EPDIS;
+ /* Wait for endpoint disable.*/
+ while (!(otgp->ie[i].DIEPINT & DIEPINT_EPDISD))
+ ;
+ }
+ else
+ otgp->ie[i].DIEPCTL = 0;
+ otgp->ie[i].DIEPTSIZ = 0;
+ otgp->ie[i].DIEPINT = 0xFFFFFFFF;
+ /* Disable only if enabled because this sentence in the manual:
+ "The application must set this bit only if Endpoint Enable is
+ already set for this endpoint".
+ Note that the attempt to disable the OUT EP0 is ignored by the
+ hardware but the code is simpler this way.*/
+ if ((otgp->oe[i].DOEPCTL & DOEPCTL_EPENA) != 0) {
+ otgp->oe[i].DOEPCTL = DOEPCTL_EPDIS;
+ /* Wait for endpoint disable.*/
+ while (!(otgp->oe[i].DOEPINT & DOEPINT_OTEPDIS))
+ ;
+ }
+ else
+ otgp->oe[i].DOEPCTL = 0;
+ otgp->oe[i].DOEPTSIZ = 0;
+ otgp->oe[i].DOEPINT = 0xFFFFFFFF;
+ }
+ otgp->DAINTMSK = DAINTMSK_OEPM(0) | DAINTMSK_IEPM(0);
+}
+
+static void otg_rxfifo_flush(USBDriver *usbp) {
+ stm32_otg_t *otgp = usbp->otg;
+
+ otgp->GRSTCTL = GRSTCTL_RXFFLSH;
+ while ((otgp->GRSTCTL & GRSTCTL_RXFFLSH) != 0)
+ ;
+ /* Wait for 3 PHY Clocks.*/
+ halPolledDelay(12);
+}
+
+static void otg_txfifo_flush(USBDriver *usbp, uint32_t fifo) {
+ stm32_otg_t *otgp = usbp->otg;
+
+ otgp->GRSTCTL = GRSTCTL_TXFNUM(fifo) | GRSTCTL_TXFFLSH;
+ while ((otgp->GRSTCTL & GRSTCTL_TXFFLSH) != 0)
+ ;
+ /* Wait for 3 PHY Clocks.*/
+ halPolledDelay(12);
+}
+
+/**
+ * @brief Resets the FIFO RAM memory allocator.
+ *
+ * @param[in] usbp pointer to the @p USBDriver object
+ *
+ * @notapi
+ */
+static void otg_ram_reset(USBDriver *usbp) {
+
+ usbp->pmnext = usbp->otgparams->rx_fifo_size;
+}
+
+/**
+ * @brief Allocates a block from the FIFO RAM memory.
+ *
+ * @param[in] usbp pointer to the @p USBDriver object
+ * @param[in] size size of the packet buffer to allocate in words
+ *
+ * @notapi
+ */
+static uint32_t otg_ram_alloc(USBDriver *usbp, size_t size) {
+ uint32_t next;
+
+ next = usbp->pmnext;
+ usbp->pmnext += size;
+ chDbgAssert(usbp->pmnext <= usbp->otgparams->otg_ram_size,
+ "otg_fifo_alloc(), #1", "OTG FIFO memory overflow");
+ return next;
+}
+
+/**
+ * @brief Pushes a series of words into a FIFO.
+ *
+ * @param[in] fifop pointer to the FIFO register
+ * @param[in] buf pointer to the words buffer, not necessarily word
+ * aligned
+ * @param[in] n number of words to push
+ *
+ * @return A pointer after the last word pushed.
+ *
+ * @notapi
+ */
+static uint8_t *otg_do_push(volatile uint32_t *fifop, uint8_t *buf, size_t n) {
+
+ while (n > 0) {
+ /* Note, this line relies on the Cortex-M3/M4 ability to perform
+ unaligned word accesses and on the LSB-first memory organization.*/
+ *fifop = *((uint32_t *)buf);
+ buf += 4;
+ n--;
+ }
+ return buf;
+}
+
+/**
+ * @brief Writes to a TX FIFO.
+ *
+ * @param[in] fifop pointer to the FIFO register
+ * @param[in] buf buffer where to copy the endpoint data
+ * @param[in] n maximum number of bytes to copy
+ *
+ * @notapi
+ */
+static void otg_fifo_write_from_buffer(volatile uint32_t *fifop,
+ const uint8_t *buf,
+ size_t n) {
+
+ otg_do_push(fifop, (uint8_t *)buf, (n + 3) / 4);
+}
+
+/**
+ * @brief Writes to a TX FIFO fetching data from a queue.
+ *
+ * @param[in] fifop pointer to the FIFO register
+ * @param[in] oqp pointer to an @p OutputQueue object
+ * @param[in] n maximum number of bytes to copy
+ *
+ * @notapi
+ */
+static void otg_fifo_write_from_queue(volatile uint32_t *fifop,
+ OutputQueue *oqp,
+ size_t n) {
+ size_t ntogo;
+
+ ntogo = n;
+ while (ntogo > 0) {
+ uint32_t w, i;
+ size_t nw = ntogo / 4;
+
+ if (nw > 0) {
+ size_t streak;
+ uint32_t nw2end = (oqp->q_top - oqp->q_rdptr) / 4;
+
+ ntogo -= (streak = nw <= nw2end ? nw : nw2end) * 4;
+ oqp->q_rdptr = otg_do_push(fifop, oqp->q_rdptr, streak);
+ if (oqp->q_rdptr >= oqp->q_top) {
+ oqp->q_rdptr = oqp->q_buffer;
+ continue;
+ }
+ }
+
+ /* If this condition is not satisfied then there is a word lying across
+ queue circular buffer boundary or there are some remaining bytes.*/
+ if (ntogo <= 0)
+ break;
+
+ /* One byte at time.*/
+ w = 0;
+ i = 0;
+ while ((ntogo > 0) && (i < 4)) {
+ w |= (uint32_t)*oqp->q_rdptr++ << (i * 8);
+ if (oqp->q_rdptr >= oqp->q_top)
+ oqp->q_rdptr = oqp->q_buffer;
+ ntogo--;
+ i++;
+ }
+ *fifop = w;
+ }
+
+ /* Updating queue.*/
+ chSysLock();
+ oqp->q_counter += n;
+ while (notempty(&oqp->q_waiting))
+ chSchReadyI(fifo_remove(&oqp->q_waiting))->p_u.rdymsg = Q_OK;
+ chSchRescheduleS();
+ chSysUnlock();
+}
+
+/**
+ * @brief Pops a series of words from a FIFO.
+ *
+ * @param[in] fifop pointer to the FIFO register
+ * @param[in] buf pointer to the words buffer, not necessarily word
+ * aligned
+ * @param[in] n number of words to push
+ *
+ * @return A pointer after the last word pushed.
+ *
+ * @notapi
+ */
+static uint8_t *otg_do_pop(volatile uint32_t *fifop, uint8_t *buf, size_t n) {
+
+ while (n > 0) {
+ uint32_t w = *fifop;
+ /* Note, this line relies on the Cortex-M3/M4 ability to perform
+ unaligned word accesses and on the LSB-first memory organization.*/
+ *((uint32_t *)buf) = w;
+ buf += 4;
+ n--;
+ }
+ return buf;
+}
+
+/**
+ * @brief Reads a packet from the RXFIFO.
+ *
+ * @param[in] fifop pointer to the FIFO register
+ * @param[out] buf buffer where to copy the endpoint data
+ * @param[in] n number of bytes to pull from the FIFO
+ * @param[in] max number of bytes to copy into the buffer
+ *
+ * @notapi
+ */
+static void otg_fifo_read_to_buffer(volatile uint32_t *fifop,
+ uint8_t *buf,
+ size_t n,
+ size_t max) {
+
+ n = (n + 3) / 4;
+ max = (max + 3) / 4;
+ while (n) {
+ uint32_t w = *fifop;
+ if (max) {
+ /* Note, this line relies on the Cortex-M3/M4 ability to perform
+ unaligned word accesses and on the LSB-first memory organization.*/
+ *((uint32_t *)buf) = w;
+ buf += 4;
+ max--;
+ }
+ n--;
+ }
+}
+
+/**
+ * @brief Reads a packet from the RXFIFO.
+ *
+ * @param[in] fifop pointer to the FIFO register
+ * @param[in] iqp pointer to an @p InputQueue object
+ * @param[in] n number of bytes to pull from the FIFO
+ *
+ * @notapi
+ */
+static void otg_fifo_read_to_queue(volatile uint32_t *fifop,
+ InputQueue *iqp,
+ size_t n) {
+ size_t ntogo;
+
+ ntogo = n;
+ while (ntogo > 0) {
+ uint32_t w, i;
+ size_t nw = ntogo / 4;
+
+ if (nw > 0) {
+ size_t streak;
+ uint32_t nw2end = (iqp->q_wrptr - iqp->q_wrptr) / 4;
+
+ ntogo -= (streak = nw <= nw2end ? nw : nw2end) * 4;
+ iqp->q_wrptr = otg_do_pop(fifop, iqp->q_wrptr, streak);
+ if (iqp->q_wrptr >= iqp->q_top) {
+ iqp->q_wrptr = iqp->q_buffer;
+ continue;
+ }
+ }
+
+ /* If this condition is not satisfied then there is a word lying across
+ queue circular buffer boundary or there are some remaining bytes.*/
+ if (ntogo <= 0)
+ break;
+
+ /* One byte at time.*/
+ w = *fifop;
+ i = 0;
+ while ((ntogo > 0) && (i < 4)) {
+ *iqp->q_wrptr++ = (uint8_t)(w >> (i * 8));
+ if (iqp->q_wrptr >= iqp->q_top)
+ iqp->q_wrptr = iqp->q_buffer;
+ ntogo--;
+ i++;
+ }
+ }
+
+ /* Updating queue.*/
+ chSysLock();
+ iqp->q_counter += n;
+ while (notempty(&iqp->q_waiting))
+ chSchReadyI(fifo_remove(&iqp->q_waiting))->p_u.rdymsg = Q_OK;
+ chSchRescheduleS();
+ chSysUnlock();
+}
+
+/**
+ * @brief Incoming packets handler.
+ *
+ * @param[in] usbp pointer to the @p USBDriver object
+ *
+ * @notapi
+ */
+static void otg_rxfifo_handler(USBDriver *usbp) {
+ uint32_t sts, cnt, ep;
+
+ sts = usbp->otg->GRXSTSP;
+ switch (sts & GRXSTSP_PKTSTS_MASK) {
+ case GRXSTSP_SETUP_COMP:
+ break;
+ case GRXSTSP_SETUP_DATA:
+ cnt = (sts & GRXSTSP_BCNT_MASK) >> GRXSTSP_BCNT_OFF;
+ ep = (sts & GRXSTSP_EPNUM_MASK) >> GRXSTSP_EPNUM_OFF;
+ otg_fifo_read_to_buffer(usbp->otg->FIFO[0], usbp->epc[ep]->setup_buf,
+ cnt, 8);
+ break;
+ case GRXSTSP_OUT_DATA:
+ cnt = (sts & GRXSTSP_BCNT_MASK) >> GRXSTSP_BCNT_OFF;
+ ep = (sts & GRXSTSP_EPNUM_MASK) >> GRXSTSP_EPNUM_OFF;
+ if (usbp->epc[ep]->out_state->rxqueued) {
+ /* Queue associated.*/
+ otg_fifo_read_to_queue(usbp->otg->FIFO[0],
+ usbp->epc[ep]->out_state->mode.queue.rxqueue,
+ cnt);
+ }
+ else {
+ otg_fifo_read_to_buffer(usbp->otg->FIFO[0],
+ usbp->epc[ep]->out_state->mode.linear.rxbuf,
+ cnt,
+ usbp->epc[ep]->out_state->rxsize -
+ usbp->epc[ep]->out_state->rxcnt);
+ usbp->epc[ep]->out_state->mode.linear.rxbuf += cnt;
+ }
+ usbp->epc[ep]->out_state->rxcnt += cnt;
+ break;
+ case GRXSTSP_OUT_GLOBAL_NAK:
+ case GRXSTSP_OUT_COMP:
+ default:
+ ;
+ }
+}
+
+/**
+ * @brief Outgoing packets handler.
+ *
+ * @param[in] usbp pointer to the @p USBDriver object
+ * @param[in] ep endpoint number
+ *
+ * @notapi
+ */
+static bool_t otg_txfifo_handler(USBDriver *usbp, usbep_t ep) {
+
+ /* The TXFIFO is filled until there is space and data to be transmitted.*/
+ while (TRUE) {
+ uint32_t n;
+
+ /* Transaction end condition.*/
+ if (usbp->epc[ep]->in_state->txcnt >= usbp->epc[ep]->in_state->txsize)
+ return TRUE;
+
+ /* Number of bytes remaining in current transaction.*/
+ n = usbp->epc[ep]->in_state->txsize - usbp->epc[ep]->in_state->txcnt;
+ if (n > usbp->epc[ep]->in_maxsize)
+ n = usbp->epc[ep]->in_maxsize;
+
+ /* Checks if in the TXFIFO there is enough space to accommodate the
+ next packet.*/
+ if (((usbp->otg->ie[ep].DTXFSTS & DTXFSTS_INEPTFSAV_MASK) * 4) < n)
+ return FALSE;
+
+#if STM32_USB_OTGFIFO_FILL_BASEPRI
+ __set_BASEPRI(CORTEX_PRIORITY_MASK(STM32_USB_OTGFIFO_FILL_BASEPRI));
+#endif
+ /* Handles the two cases: linear buffer or queue.*/
+ if (usbp->epc[ep]->in_state->txqueued) {
+ /* Queue associated.*/
+ otg_fifo_write_from_queue(usbp->otg->FIFO[ep],
+ usbp->epc[ep]->in_state->mode.queue.txqueue,
+ n);
+ }
+ else {
+ /* Linear buffer associated.*/
+ otg_fifo_write_from_buffer(usbp->otg->FIFO[ep],
+ usbp->epc[ep]->in_state->mode.linear.txbuf,
+ n);
+ usbp->epc[ep]->in_state->mode.linear.txbuf += n;
+ }
+ usbp->epc[ep]->in_state->txcnt += n;
+ }
+#if STM32_USB_OTGFIFO_FILL_BASEPRI
+ __set_BASEPRI(0);
+#endif
+}
+
+/**
+ * @brief Generic endpoint IN handler.
+ *
+ * @param[in] usbp pointer to the @p USBDriver object
+ * @param[in] ep endpoint number
+ *
+ * @notapi
+ */
+static void otg_epin_handler(USBDriver *usbp, usbep_t ep) {
+ stm32_otg_t *otgp = usbp->otg;
+ uint32_t epint = otgp->ie[ep].DIEPINT;
+
+ otgp->ie[ep].DIEPINT = 0xFFFFFFFF;
+
+ if (epint & DIEPINT_TOC) {
+ /* Timeouts not handled yet, not sure how to handle.*/
+ }
+ if ((epint & DIEPINT_XFRC) && (otgp->DIEPMSK & DIEPMSK_XFRCM)) {
+ /* Transmit transfer complete.*/
+ _usb_isr_invoke_in_cb(usbp, ep);
+ }
+ if ((epint & DIEPINT_TXFE) &&
+ (otgp->DIEPEMPMSK & DIEPEMPMSK_INEPTXFEM(ep))) {
+ /* The thread is made ready, it will be scheduled on ISR exit.*/
+ chSysLockFromIsr();
+ usbp->txpending |= (1 << ep);
+ otgp->DIEPEMPMSK &= ~(1 << ep);
+ usb_lld_wakeup_pump(usbp);
+ chSysUnlockFromIsr();
+ }
+}
+
+/**
+ * @brief Generic endpoint OUT handler.
+ *
+ * @param[in] usbp pointer to the @p USBDriver object
+ * @param[in] ep endpoint number
+ *
+ * @notapi
+ */
+static void otg_epout_handler(USBDriver *usbp, usbep_t ep) {
+ stm32_otg_t *otgp = usbp->otg;
+ uint32_t epint = otgp->oe[ep].DOEPINT;
+
+ /* Resets all EP IRQ sources.*/
+ otgp->oe[ep].DOEPINT = 0xFFFFFFFF;
+
+ if ((epint & DOEPINT_STUP) && (otgp->DOEPMSK & DOEPMSK_STUPM)) {
+ /* Setup packets handling, setup packets are handled using a
+ specific callback.*/
+ _usb_isr_invoke_setup_cb(usbp, ep);
+
+ }
+ if ((epint & DOEPINT_XFRC) && (otgp->DOEPMSK & DOEPMSK_XFRCM)) {
+ /* Receive transfer complete.*/
+ _usb_isr_invoke_out_cb(usbp, ep);
+ }
+}
+
+/**
+ * @brief OTG shared ISR.
+ *
+ * @param[in] usbp pointer to the @p USBDriver object
+ *
+ * @notapi
+ */
+static void usb_lld_serve_interrupt(USBDriver *usbp) {
+ stm32_otg_t *otgp = usbp->otg;
+ uint32_t sts, src;
+
+ sts = otgp->GINTSTS & otgp->GINTMSK;
+ otgp->GINTSTS = sts;
+
+ /* Reset interrupt handling.*/
+ if (sts & GINTSTS_USBRST) {
+ _usb_reset(usbp);
+ _usb_isr_invoke_event_cb(usbp, USB_EVENT_RESET);
+ }
+
+ /* Enumeration done.*/
+ if (sts & GINTSTS_ENUMDNE) {
+ (void)otgp->DSTS;
+ }
+
+ /* SOF interrupt handling.*/
+ if (sts & GINTSTS_SOF) {
+ _usb_isr_invoke_sof_cb(usbp);
+ }
+
+ /* RX FIFO not empty handling.*/
+ if (sts & GINTSTS_RXFLVL) {
+ /* The interrupt is masked while the thread has control or it would
+ be triggered again.*/
+ chSysLockFromIsr();
+ otgp->GINTMSK &= ~GINTMSK_RXFLVLM;
+ usb_lld_wakeup_pump(usbp);
+ chSysUnlockFromIsr();
+ }
+
+ /* IN/OUT endpoints event handling.*/
+ src = otgp->DAINT;
+ if (sts & GINTSTS_IEPINT) {
+ if (src & (1 << 0))
+ otg_epin_handler(usbp, 0);
+ if (src & (1 << 1))
+ otg_epin_handler(usbp, 1);
+ if (src & (1 << 2))
+ otg_epin_handler(usbp, 2);
+ if (src & (1 << 3))
+ otg_epin_handler(usbp, 3);
+#if STM32_USB_USE_OTG2
+ if (src & (1 << 4))
+ otg_epin_handler(usbp, 4);
+ if (src & (1 << 5))
+ otg_epin_handler(usbp, 5);
+#endif
+ }
+ if (sts & GINTSTS_OEPINT) {
+ if (src & (1 << 16))
+ otg_epout_handler(usbp, 0);
+ if (src & (1 << 17))
+ otg_epout_handler(usbp, 1);
+ if (src & (1 << 18))
+ otg_epout_handler(usbp, 2);
+ if (src & (1 << 19))
+ otg_epout_handler(usbp, 3);
+#if STM32_USB_USE_OTG2
+ if (src & (1 << 20))
+ otg_epout_handler(usbp, 4);
+ if (src & (1 << 21))
+ otg_epout_handler(usbp, 5);
+#endif
+ }
+}
+
+/*===========================================================================*/
+/* Driver interrupt handlers and threads. */
+/*===========================================================================*/
+
+static msg_t usb_lld_pump(void *p) {
+ USBDriver *usbp = (USBDriver *)p;
+ stm32_otg_t *otgp = usbp->otg;
+
+ chRegSetThreadName("usb_lld_pump");
+ chSysLock();
+ while (TRUE) {
+ usbep_t ep;
+ uint32_t epmask;
+
+ /* Nothing to do, going to sleep.*/
+ if ((usbp->state == USB_STOP) ||
+ ((usbp->txpending == 0) && !(otgp->GINTSTS & GINTSTS_RXFLVL))) {
+ otgp->GINTMSK |= GINTMSK_RXFLVLM;
+ usbp->thd_wait = chThdSelf();
+ chSchGoSleepS(THD_STATE_SUSPENDED);
+ }
+ chSysUnlock();
+
+ /* Checks if there are TXFIFOs to be filled.*/
+ for (ep = 0; ep <= usbp->otgparams->num_endpoints; ep++) {
+
+ /* Empties the RX FIFO.*/
+ while (otgp->GINTSTS & GINTSTS_RXFLVL) {
+ otg_rxfifo_handler(usbp);
+ }
+
+ epmask = (1 << ep);
+ if (usbp->txpending & epmask) {
+ bool_t done;
+
+ chSysLock();
+ /* USB interrupts are globally *suspended* because the peripheral
+ does not allow any interference during the TX FIFO filling
+ operation.
+ Synopsys document: DesignWare Cores USB 2.0 Hi-Speed On-The-Go (OTG)
+ "The application has to finish writing one complete packet before
+ switching to a different channel/endpoint FIFO. Violating this
+ rule results in an error.".*/
+ otgp->GAHBCFG &= ~GAHBCFG_GINTMSK;
+ usbp->txpending &= ~epmask;
+ chSysUnlock();
+
+ done = otg_txfifo_handler(usbp, ep);
+
+ chSysLock();
+ otgp->GAHBCFG |= GAHBCFG_GINTMSK;
+ if (!done)
+ otgp->DIEPEMPMSK |= epmask;
+ chSysUnlock();
+ }
+ }
+ chSysLock();
+ }
+ chSysUnlock();
+ return 0;
+}
+
+#if STM32_USB_USE_OTG1 || defined(__DOXYGEN__)
+#if !defined(STM32_OTG1_HANDLER)
+#error "STM32_OTG1_HANDLER not defined"
+#endif
+/**
+ * @brief OTG1 interrupt handler.
+ *
+ * @isr
+ */
+CH_IRQ_HANDLER(STM32_OTG1_HANDLER) {
+
+ CH_IRQ_PROLOGUE();
+
+ usb_lld_serve_interrupt(&USBD1);
+
+ CH_IRQ_EPILOGUE();
+}
+#endif
+
+#if STM32_USB_USE_OTG2 || defined(__DOXYGEN__)
+#if !defined(STM32_OTG2_HANDLER)
+#error "STM32_OTG2_HANDLER not defined"
+#endif
+/**
+ * @brief OTG2 interrupt handler.
+ *
+ * @isr
+ */
+CH_IRQ_HANDLER(STM32_OTG2_HANDLER) {
+
+ CH_IRQ_PROLOGUE();
+
+ usb_lld_serve_interrupt(&USBD2);
+
+ CH_IRQ_EPILOGUE();
+}
+#endif
+
+/*===========================================================================*/
+/* Driver exported functions. */
+/*===========================================================================*/
+
+/**
+ * @brief Low level USB driver initialization.
+ *
+ * @notapi
+ */
+void usb_lld_init(void) {
+
+ /* Driver initialization.*/
+#if STM32_USB_USE_OTG1
+ usbObjectInit(&USBD1);
+ USBD1.thd_ptr = NULL;
+ USBD1.thd_wait = NULL;
+ USBD1.otg = OTG_FS;
+ USBD1.otgparams = &fsparams;
+
+ /* Filling the thread working area here because the function
+ @p chThdCreateI() does not do it.*/
+#if CH_DBG_FILL_THREADS
+ {
+ void *wsp = USBD1.wa_pump;
+ _thread_memfill((uint8_t *)wsp,
+ (uint8_t *)wsp + sizeof(Thread),
+ CH_THREAD_FILL_VALUE);
+ _thread_memfill((uint8_t *)wsp + sizeof(Thread),
+ (uint8_t *)wsp + sizeof(USBD1.wa_pump) - sizeof(Thread),
+ CH_STACK_FILL_VALUE);
+ }
+#endif
+#endif
+
+#if STM32_USB_USE_OTG2
+ usbObjectInit(&USBD2);
+ USBD2.thd_ptr = NULL;
+ USBD2.thd_wait = NULL;
+ USBD2.otg = OTG_HS;
+ USBD2.otgparams = &hsparams;
+
+ /* Filling the thread working area here because the function
+ @p chThdCreateI() does not do it.*/
+#if CH_DBG_FILL_THREADS
+ {
+ void *wsp = USBD2.wa_pump;
+ _thread_memfill((uint8_t *)wsp,
+ (uint8_t *)wsp + sizeof(Thread),
+ CH_THREAD_FILL_VALUE);
+ _thread_memfill((uint8_t *)wsp + sizeof(Thread),
+ (uint8_t *)wsp + sizeof(USBD2.wa_pump) - sizeof(Thread),
+ CH_STACK_FILL_VALUE);
+ }
+#endif
+#endif
+}
+
+/**
+ * @brief Configures and activates the USB peripheral.
+ * @note Starting the OTG cell can be a slow operation carried out with
+ * interrupts disabled, perform it before starting time-critical
+ * operations.
+ *
+ * @param[in] usbp pointer to the @p USBDriver object
+ *
+ * @notapi
+ */
+void usb_lld_start(USBDriver *usbp) {
+ stm32_otg_t *otgp = usbp->otg;
+
+ if (usbp->state == USB_STOP) {
+ /* Clock activation.*/
+#if STM32_USB_USE_OTG1
+ if (&USBD1 == usbp) {
+ /* OTG FS clock enable and reset.*/
+ rccEnableOTG_FS(FALSE);
+ rccResetOTG_FS();
+
+ /* Enables IRQ vector.*/
+ nvicEnableVector(STM32_OTG1_NUMBER,
+ CORTEX_PRIORITY_MASK(STM32_USB_OTG1_IRQ_PRIORITY));
+ }
+#endif
+#if STM32_USB_USE_OTG2
+ if (&USBD2 == usbp) {
+ /* OTG HS clock enable and reset.*/
+ rccEnableOTG_HS(FALSE);
+ rccResetOTG_HS();
+
+ /* Enables IRQ vector.*/
+ nvicEnableVector(STM32_OTG2_NUMBER,
+ CORTEX_PRIORITY_MASK(STM32_USB_OTG2_IRQ_PRIORITY));
+ }
+#endif
+
+ /* Creates the data pump threads in a suspended state. Note, it is
+ created only once, the first time @p usbStart() is invoked.*/
+ usbp->txpending = 0;
+ if (usbp->thd_ptr == NULL)
+ usbp->thd_ptr = usbp->thd_wait = chThdCreateI(usbp->wa_pump,
+ sizeof usbp->wa_pump,
+ STM32_USB_OTG_THREAD_PRIO,
+ usb_lld_pump,
+ usbp);
+
+ /* - Forced device mode.
+ - USB turn-around time = TRDT_VALUE.
+ - Full Speed 1.1 PHY.*/
+ otgp->GUSBCFG = GUSBCFG_FDMOD | GUSBCFG_TRDT(TRDT_VALUE) | GUSBCFG_PHYSEL;
+
+ /* 48MHz 1.1 PHY.*/
+ otgp->DCFG = 0x02200000 | DCFG_DSPD_FS11;
+
+ /* PHY enabled.*/
+ otgp->PCGCCTL = 0;
+
+ /* Internal FS PHY activation.*/
+ otgp->GCCFG = GCCFG_VBUSASEN | GCCFG_VBUSBSEN | GCCFG_PWRDWN;
+
+ /* Soft core reset.*/
+ otg_core_reset(usbp);
+
+ /* Interrupts on TXFIFOs half empty.*/
+ otgp->GAHBCFG = 0;
+
+ /* Endpoints re-initialization.*/
+ otg_disable_ep(usbp);
+
+ /* Clear all pending Device Interrupts, only the USB Reset interrupt
+ is required initially.*/
+ otgp->DIEPMSK = 0;
+ otgp->DOEPMSK = 0;
+ otgp->DAINTMSK = 0;
+ if (usbp->config->sof_cb == NULL)
+ otgp->GINTMSK = GINTMSK_ENUMDNEM | GINTMSK_USBRSTM /*| GINTMSK_USBSUSPM |
+ GINTMSK_ESUSPM |*/;
+ else
+ otgp->GINTMSK = GINTMSK_ENUMDNEM | GINTMSK_USBRSTM /*| GINTMSK_USBSUSPM |
+ GINTMSK_ESUSPM */ | GINTMSK_SOFM;
+ otgp->GINTSTS = 0xFFFFFFFF; /* Clears all pending IRQs, if any. */
+
+ /* Global interrupts enable.*/
+ otgp->GAHBCFG |= GAHBCFG_GINTMSK;
+ }
+}
+
+/**
+ * @brief Deactivates the USB peripheral.
+ *
+ * @param[in] usbp pointer to the @p USBDriver object
+ *
+ * @notapi
+ */
+void usb_lld_stop(USBDriver *usbp) {
+ stm32_otg_t *otgp = usbp->otg;
+
+ /* If in ready state then disables the USB clock.*/
+ if (usbp->state != USB_STOP) {
+
+ /* Disabling all endpoints in case the driver has been stopped while
+ active.*/
+ otg_disable_ep(usbp);
+
+ usbp->txpending = 0;
+
+ otgp->DAINTMSK = 0;
+ otgp->GAHBCFG = 0;
+ otgp->GCCFG = 0;
+
+#if STM32_USB_USE_USB1
+ if (&USBD1 == usbp) {
+ nvicDisableVector(STM32_OTG1_NUMBER);
+ rccDisableOTG1(FALSE);
+ }
+#endif
+
+#if STM32_USB_USE_USB2
+ if (&USBD2 == usbp) {
+ nvicDisableVector(STM32_OTG2_NUMBER);
+ rccDisableOTG2(FALSE);
+ }
+#endif
+ }
+}
+
+/**
+ * @brief USB low level reset routine.
+ *
+ * @param[in] usbp pointer to the @p USBDriver object
+ *
+ * @notapi
+ */
+void usb_lld_reset(USBDriver *usbp) {
+ unsigned i;
+ stm32_otg_t *otgp = usbp->otg;
+
+ /* Flush the Tx FIFO.*/
+ otg_txfifo_flush(usbp, 0);
+
+ /* All endpoints in NAK mode, interrupts cleared.*/
+ for (i = 0; i <= usbp->otgparams->num_endpoints; i++) {
+ otgp->ie[i].DIEPCTL = DIEPCTL_SNAK;
+ otgp->oe[i].DOEPCTL = DOEPCTL_SNAK;
+ otgp->ie[i].DIEPINT = 0xFF;
+ otgp->oe[i].DOEPINT = 0xFF;
+ }
+
+ /* Endpoint interrupts all disabled and cleared.*/
+ otgp->DAINT = 0xFFFFFFFF;
+ otgp->DAINTMSK = DAINTMSK_OEPM(0) | DAINTMSK_IEPM(0);
+
+ /* Resets the FIFO memory allocator.*/
+ otg_ram_reset(usbp);
+
+ /* Receive FIFO size initialization, the address is always zero.*/
+ otgp->GRXFSIZ = usbp->otgparams->rx_fifo_size;
+ otg_rxfifo_flush(usbp);
+
+ /* Resets the device address to zero.*/
+ otgp->DCFG = (otgp->DCFG & ~DCFG_DAD_MASK) | DCFG_DAD(0);
+
+ /* Enables also EP-related interrupt sources.*/
+ otgp->GINTMSK |= GINTMSK_RXFLVLM | GINTMSK_OEPM | GINTMSK_IEPM;
+ otgp->DIEPMSK = DIEPMSK_TOCM | DIEPMSK_XFRCM;
+ otgp->DOEPMSK = DOEPMSK_STUPM | DOEPMSK_XFRCM;
+
+ /* EP0 initialization, it is a special case.*/
+ usbp->epc[0] = &ep0config;
+ otgp->oe[0].DOEPTSIZ = 0;
+ otgp->oe[0].DOEPCTL = DOEPCTL_SD0PID | DOEPCTL_USBAEP | DOEPCTL_EPTYP_CTRL |
+ DOEPCTL_MPSIZ(ep0config.out_maxsize);
+ otgp->ie[0].DIEPTSIZ = 0;
+ otgp->ie[0].DIEPCTL = DIEPCTL_SD0PID | DIEPCTL_USBAEP | DIEPCTL_EPTYP_CTRL |
+ DIEPCTL_TXFNUM(0) | DIEPCTL_MPSIZ(ep0config.in_maxsize);
+ otgp->DIEPTXF0 = DIEPTXF_INEPTXFD(ep0config.in_maxsize / 4) |
+ DIEPTXF_INEPTXSA(otg_ram_alloc(usbp,
+ ep0config.in_maxsize / 4));
+}
+
+/**
+ * @brief Sets the USB address.
+ *
+ * @param[in] usbp pointer to the @p USBDriver object
+ *
+ * @notapi
+ */
+void usb_lld_set_address(USBDriver *usbp) {
+ stm32_otg_t *otgp = usbp->otg;
+
+ otgp->DCFG = (otgp->DCFG & ~DCFG_DAD_MASK) | DCFG_DAD(usbp->address);
+}
+
+/**
+ * @brief Enables an endpoint.
+ *
+ * @param[in] usbp pointer to the @p USBDriver object
+ * @param[in] ep endpoint number
+ *
+ * @notapi
+ */
+void usb_lld_init_endpoint(USBDriver *usbp, usbep_t ep) {
+ uint32_t ctl, fsize;
+ stm32_otg_t *otgp = usbp->otg;
+
+ /* IN and OUT common parameters.*/
+ switch (usbp->epc[ep]->ep_mode & USB_EP_MODE_TYPE) {
+ case USB_EP_MODE_TYPE_CTRL:
+ ctl = DIEPCTL_SD0PID | DIEPCTL_USBAEP | DIEPCTL_EPTYP_CTRL;
+ break;
+ case USB_EP_MODE_TYPE_ISOC:
+ ctl = DIEPCTL_SD0PID | DIEPCTL_USBAEP | DIEPCTL_EPTYP_ISO;
+ break;
+ case USB_EP_MODE_TYPE_BULK:
+ ctl = DIEPCTL_SD0PID | DIEPCTL_USBAEP | DIEPCTL_EPTYP_BULK;
+ break;
+ case USB_EP_MODE_TYPE_INTR:
+ ctl = DIEPCTL_SD0PID | DIEPCTL_USBAEP | DIEPCTL_EPTYP_INTR;
+ break;
+ default:
+ return;
+ }
+
+ /* OUT endpoint activation or deactivation.*/
+ otgp->oe[ep].DOEPTSIZ = 0;
+ if (usbp->epc[ep]->out_cb != NULL) {
+ otgp->oe[ep].DOEPCTL = ctl | DOEPCTL_MPSIZ(usbp->epc[ep]->out_maxsize);
+ otgp->DAINTMSK |= DAINTMSK_OEPM(ep);
+ }
+ else {
+ otgp->oe[ep].DOEPCTL &= ~DOEPCTL_USBAEP;
+ otgp->DAINTMSK &= ~DAINTMSK_OEPM(ep);
+ }
+
+ /* IN endpoint activation or deactivation.*/
+ otgp->ie[ep].DIEPTSIZ = 0;
+ if (usbp->epc[ep]->in_cb != NULL) {
+ /* FIFO allocation for the IN endpoint.*/
+ fsize = usbp->epc[ep]->in_maxsize / 4;
+ if (usbp->epc[ep]->in_multiplier > 1)
+ fsize *= usbp->epc[ep]->in_multiplier;
+ otgp->DIEPTXF[ep - 1] = DIEPTXF_INEPTXFD(fsize) |
+ DIEPTXF_INEPTXSA(otg_ram_alloc(usbp, fsize));
+ otg_txfifo_flush(usbp, ep);
+
+ otgp->ie[ep].DIEPCTL = ctl |
+ DIEPCTL_TXFNUM(ep) |
+ DIEPCTL_MPSIZ(usbp->epc[ep]->in_maxsize);
+ otgp->DAINTMSK |= DAINTMSK_IEPM(ep);
+ }
+ else {
+ otgp->DIEPTXF[ep - 1] = 0x02000400; /* Reset value.*/
+ otg_txfifo_flush(usbp, ep);
+ otgp->ie[ep].DIEPCTL &= ~DIEPCTL_USBAEP;
+ otgp->DAINTMSK &= ~DAINTMSK_IEPM(ep);
+ }
+}
+
+/**
+ * @brief Disables all the active endpoints except the endpoint zero.
+ *
+ * @param[in] usbp pointer to the @p USBDriver object
+ *
+ * @notapi
+ */
+void usb_lld_disable_endpoints(USBDriver *usbp) {
+
+ /* Resets the FIFO memory allocator.*/
+ otg_ram_reset(usbp);
+
+ /* Disabling all endpoints.*/
+ otg_disable_ep(usbp);
+}
+
+/**
+ * @brief Returns the status of an OUT endpoint.
+ *
+ * @param[in] usbp pointer to the @p USBDriver object
+ * @param[in] ep endpoint number
+ * @return The endpoint status.
+ * @retval EP_STATUS_DISABLED The endpoint is not active.
+ * @retval EP_STATUS_STALLED The endpoint is stalled.
+ * @retval EP_STATUS_ACTIVE The endpoint is active.
+ *
+ * @notapi
+ */
+usbepstatus_t usb_lld_get_status_out(USBDriver *usbp, usbep_t ep) {
+ uint32_t ctl;
+
+ (void)usbp;
+
+ ctl = usbp->otg->oe[ep].DOEPCTL;
+ if (!(ctl & DOEPCTL_USBAEP))
+ return EP_STATUS_DISABLED;
+ if (ctl & DOEPCTL_STALL)
+ return EP_STATUS_STALLED;
+ return EP_STATUS_ACTIVE;
+}
+
+/**
+ * @brief Returns the status of an IN endpoint.
+ *
+ * @param[in] usbp pointer to the @p USBDriver object
+ * @param[in] ep endpoint number
+ * @return The endpoint status.
+ * @retval EP_STATUS_DISABLED The endpoint is not active.
+ * @retval EP_STATUS_STALLED The endpoint is stalled.
+ * @retval EP_STATUS_ACTIVE The endpoint is active.
+ *
+ * @notapi
+ */
+usbepstatus_t usb_lld_get_status_in(USBDriver *usbp, usbep_t ep) {
+ uint32_t ctl;
+
+ (void)usbp;
+
+ ctl = usbp->otg->ie[ep].DIEPCTL;
+ if (!(ctl & DIEPCTL_USBAEP))
+ return EP_STATUS_DISABLED;
+ if (ctl & DIEPCTL_STALL)
+ return EP_STATUS_STALLED;
+ return EP_STATUS_ACTIVE;
+}
+
+/**
+ * @brief Reads a setup packet from the dedicated packet buffer.
+ * @details This function must be invoked in the context of the @p setup_cb
+ * callback in order to read the received setup packet.
+ * @pre In order to use this function the endpoint must have been
+ * initialized as a control endpoint.
+ * @post The endpoint is ready to accept another packet.
+ *
+ * @param[in] usbp pointer to the @p USBDriver object
+ * @param[in] ep endpoint number
+ * @param[out] buf buffer where to copy the packet data
+ *
+ * @notapi
+ */
+void usb_lld_read_setup(USBDriver *usbp, usbep_t ep, uint8_t *buf) {
+
+ memcpy(buf, usbp->epc[ep]->setup_buf, 8);
+}
+
+/**
+ * @brief Prepares for a receive operation.
+ *
+ * @param[in] usbp pointer to the @p USBDriver object
+ * @param[in] ep endpoint number
+ *
+ * @notapi
+ */
+void usb_lld_prepare_receive(USBDriver *usbp, usbep_t ep) {
+ uint32_t pcnt;
+ USBOutEndpointState *osp = usbp->epc[ep]->out_state;
+
+ /* Transfer initialization.*/
+ pcnt = (osp->rxsize + usbp->epc[ep]->out_maxsize - 1) /
+ usbp->epc[ep]->out_maxsize;
+ usbp->otg->oe[ep].DOEPTSIZ = DOEPTSIZ_STUPCNT(3) | DOEPTSIZ_PKTCNT(pcnt) |
+ DOEPTSIZ_XFRSIZ(usbp->epc[ep]->out_maxsize);
+
+}
+
+/**
+ * @brief Prepares for a transmit operation.
+ *
+ * @param[in] usbp pointer to the @p USBDriver object
+ * @param[in] ep endpoint number
+ *
+ * @notapi
+ */
+void usb_lld_prepare_transmit(USBDriver *usbp, usbep_t ep) {
+ USBInEndpointState *isp = usbp->epc[ep]->in_state;
+
+ /* Transfer initialization.*/
+ if (isp->txsize == 0) {
+ /* Special case, sending zero size packet.*/
+ usbp->otg->ie[ep].DIEPTSIZ = DIEPTSIZ_PKTCNT(1) | DIEPTSIZ_XFRSIZ(0);
+ }
+ else {
+ /* Normal case.*/
+ uint32_t pcnt = (isp->txsize + usbp->epc[ep]->in_maxsize - 1) /
+ usbp->epc[ep]->in_maxsize;
+ usbp->otg->ie[ep].DIEPTSIZ = DIEPTSIZ_PKTCNT(pcnt) |
+ DIEPTSIZ_XFRSIZ(usbp->epc[ep]->in_state->txsize);
+ }
+
+}
+
+/**
+ * @brief Starts a receive operation on an OUT endpoint.
+ *
+ * @param[in] usbp pointer to the @p USBDriver object
+ * @param[in] ep endpoint number
+ *
+ * @notapi
+ */
+void usb_lld_start_out(USBDriver *usbp, usbep_t ep) {
+
+ usbp->otg->oe[ep].DOEPCTL |= DOEPCTL_CNAK;
+}
+
+/**
+ * @brief Starts a transmit operation on an IN endpoint.
+ *
+ * @param[in] usbp pointer to the @p USBDriver object
+ * @param[in] ep endpoint number
+ *
+ * @notapi
+ */
+void usb_lld_start_in(USBDriver *usbp, usbep_t ep) {
+
+ usbp->otg->ie[ep].DIEPCTL |= DIEPCTL_EPENA | DIEPCTL_CNAK;
+ usbp->otg->DIEPEMPMSK |= DIEPEMPMSK_INEPTXFEM(ep);
+}
+
+/**
+ * @brief Brings an OUT endpoint in the stalled state.
+ *
+ * @param[in] usbp pointer to the @p USBDriver object
+ * @param[in] ep endpoint number
+ *
+ * @notapi
+ */
+void usb_lld_stall_out(USBDriver *usbp, usbep_t ep) {
+
+ usbp->otg->oe[ep].DOEPCTL |= DOEPCTL_STALL;
+}
+
+/**
+ * @brief Brings an IN endpoint in the stalled state.
+ *
+ * @param[in] usbp pointer to the @p USBDriver object
+ * @param[in] ep endpoint number
+ *
+ * @notapi
+ */
+void usb_lld_stall_in(USBDriver *usbp, usbep_t ep) {
+
+ usbp->otg->ie[ep].DIEPCTL |= DIEPCTL_STALL;
+}
+
+/**
+ * @brief Brings an OUT endpoint in the active state.
+ *
+ * @param[in] usbp pointer to the @p USBDriver object
+ * @param[in] ep endpoint number
+ *
+ * @notapi
+ */
+void usb_lld_clear_out(USBDriver *usbp, usbep_t ep) {
+
+ usbp->otg->oe[ep].DOEPCTL &= ~DOEPCTL_STALL;
+}
+
+/**
+ * @brief Brings an IN endpoint in the active state.
+ *
+ * @param[in] usbp pointer to the @p USBDriver object
+ * @param[in] ep endpoint number
+ *
+ * @notapi
+ */
+void usb_lld_clear_in(USBDriver *usbp, usbep_t ep) {
+
+ usbp->otg->ie[ep].DIEPCTL &= ~DIEPCTL_STALL;
+}
+
+#endif /* HAL_USE_USB */
+
+/** @} */
diff --git a/os/hal/platforms/STM32/OTGv1/usb_lld.h b/os/hal/platforms/STM32/OTGv1/usb_lld.h new file mode 100644 index 000000000..570309750 --- /dev/null +++ b/os/hal/platforms/STM32/OTGv1/usb_lld.h @@ -0,0 +1,534 @@ +/*
+ ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+/**
+ * @file STM32/OTGv1/usb_lld.h
+ * @brief STM32 USB subsystem low level driver header.
+ *
+ * @addtogroup USB
+ * @{
+ */
+
+#ifndef _USB_LLD_H_
+#define _USB_LLD_H_
+
+#if HAL_USE_USB || defined(__DOXYGEN__)
+
+#include "stm32_otg.h"
+
+/*===========================================================================*/
+/* Driver constants. */
+/*===========================================================================*/
+
+/**
+ * @brief Maximum endpoint address.
+ */
+#if !STM32_USB_USE_OTG2 || defined(__DOXYGEN__)
+#define USB_MAX_ENDPOINTS 3
+#else
+#define USB_MAX_ENDPOINTS 5
+#endif
+
+/**
+ * @brief The address can be changed immediately upon packet reception.
+ */
+#define USB_SET_ADDRESS_MODE USB_EARLY_SET_ADDRESS
+
+/*===========================================================================*/
+/* Driver pre-compile time settings. */
+/*===========================================================================*/
+
+/**
+ * @brief OTG1 driver enable switch.
+ * @details If set to @p TRUE the support for OTG_FS is included.
+ * @note The default is @p TRUE.
+ */
+#if !defined(STM32_USB_USE_OTG1) || defined(__DOXYGEN__)
+#define STM32_USB_USE_OTG1 FALSE
+#endif
+
+/**
+ * @brief OTG2 driver enable switch.
+ * @details If set to @p TRUE the support for OTG_HS is included.
+ * @note The default is @p TRUE.
+ */
+#if !defined(STM32_USB_USE_OTG2) || defined(__DOXYGEN__)
+#define STM32_USB_USE_OTG2 FALSE
+#endif
+
+/**
+ * @brief OTG1 interrupt priority level setting.
+ */
+#if !defined(STM32_USB_OTG1_IRQ_PRIORITY) || defined(__DOXYGEN__)
+#define STM32_USB_OTG1_IRQ_PRIORITY 14
+#endif
+
+/**
+ * @brief OTG2 interrupt priority level setting.
+ */
+#if !defined(STM32_USB_OTG2_IRQ_PRIORITY) || defined(__DOXYGEN__)
+#define STM32_USB_OTG2_IRQ_PRIORITY 14
+#endif
+
+/**
+ * @brief OTG1 RX shared FIFO size.
+ * @note Must be a multiple of 4.
+ */
+#if !defined(STM32_USB_OTG1_RX_FIFO_SIZE) || defined(__DOXYGEN__)
+#define STM32_USB_OTG1_RX_FIFO_SIZE 512
+#endif
+
+/**
+ * @brief OTG2 RX shared FIFO size.
+ * @note Must be a multiple of 4.
+ */
+#if !defined(STM32_USB_OTG2_RX_FIFO_SIZE) || defined(__DOXYGEN__)
+#define STM32_USB_OTG2_RX_FIFO_SIZE 1024
+#endif
+
+/**
+ * @brief Dedicated data pump threads priority.
+ */
+#if !defined(STM32_USB_OTG_THREAD_PRIO) || defined(__DOXYGEN__)
+#define STM32_USB_OTG_THREAD_PRIO LOWPRIO
+#endif
+
+/**
+ * @brief Dedicated data pump threads stack size.
+ */
+#if !defined(STM32_USB_OTG_THREAD_STACK_SIZE) || defined(__DOXYGEN__)
+#define STM32_USB_OTG_THREAD_STACK_SIZE 128
+#endif
+
+/**
+ * @brief Exception priority level during TXFIFOs operations.
+ * @note Because an undocumented silicon behavior the operation of
+ * copying a packet into a TXFIFO must not be interrupted by
+ * any other operation on the OTG peripheral.
+ * This parameter represents the priority mask during copy
+ * operations. The default value only allows to call USB
+ * functions from callbacks invoked from USB ISR handlers.
+ * If you need to invoke USB functions from other handlers
+ * then raise this priority mast to the same level of the
+ * handler you need to use.
+ * @note The value zero means disabled, when disabled calling USB
+ * functions is only safe from thread level or from USB
+ * callbacks.
+ */
+#if !defined(STM32_USB_OTGFIFO_FILL_BASEPRI) || defined(__DOXYGEN__)
+#define STM32_USB_OTGFIFO_FILL_BASEPRI 0
+#endif
+
+/*===========================================================================*/
+/* Derived constants and error checks. */
+/*===========================================================================*/
+
+#if STM32_USB_USE_OTG1 && !STM32_HAS_OTG1
+#error "OTG1 not present in the selected device"
+#endif
+
+#if STM32_USB_USE_OTG2 && !STM32_HAS_OTG2
+#error "OTG2 not present in the selected device"
+#endif
+
+#if !STM32_USB_USE_OTG1 && !STM32_USB_USE_OTG2
+#error "USB driver activated but no USB peripheral assigned"
+#endif
+
+#if STM32_USB_USE_OTG1 && \
+ !CORTEX_IS_VALID_KERNEL_PRIORITY(STM32_USB_OTG1_IRQ_PRIORITY)
+#error "Invalid IRQ priority assigned to OTG1"
+#endif
+
+#if STM32_USB_USE_OTG2 && \
+ !CORTEX_IS_VALID_KERNEL_PRIORITY(STM32_USB_OTG2_IRQ_PRIORITY)
+#error "Invalid IRQ priority assigned to OTG2"
+#endif
+
+#if (STM32_USB_OTG1_RX_FIFO_SIZE & 3) != 0
+#error "OTG1 RX FIFO size must be a multiple of 4"
+#endif
+
+#if (STM32_USB_OTG2_RX_FIFO_SIZE & 3) != 0
+#error "OTG2 RX FIFO size must be a multiple of 4"
+#endif
+
+#if defined(STM32F4XX) || defined(STM32F2XX)
+#define STM32_USBCLK STM32_PLL48CLK
+#elif defined(STM32F10X_CL)
+#define STM32_USBCLK STM32_OTGFSCLK
+#else
+#error "unsupported STM32 platform for OTG functionality"
+#endif
+
+#if STM32_USBCLK != 48000000
+#error "the USB OTG driver requires a 48MHz clock"
+#endif
+
+/*===========================================================================*/
+/* Driver data structures and types. */
+/*===========================================================================*/
+
+/**
+ * @brief Peripheral-specific parameters block.
+ */
+typedef struct {
+ uint32_t rx_fifo_size;
+ uint32_t otg_ram_size;
+ uint32_t num_endpoints;
+} stm32_otg_params_t;
+
+/**
+ * @brief Type of an IN endpoint state structure.
+ */
+typedef struct {
+ /**
+ * @brief Buffer mode, queue or linear.
+ */
+ bool_t txqueued;
+ /**
+ * @brief Requested transmit transfer size.
+ */
+ size_t txsize;
+ /**
+ * @brief Transmitted bytes so far.
+ */
+ size_t txcnt;
+ union {
+ struct {
+ /**
+ * @brief Pointer to the transmission linear buffer.
+ */
+ const uint8_t *txbuf;
+ } linear;
+ struct {
+ /**
+ * @brief Pointer to the output queue.
+ */
+ OutputQueue *txqueue;
+ } queue;
+ } mode;
+} USBInEndpointState;
+
+/**
+ * @brief Type of an OUT endpoint state structure.
+ */
+typedef struct {
+ /**
+ * @brief Buffer mode, queue or linear.
+ */
+ bool_t rxqueued;
+ /**
+ * @brief Requested receive transfer size.
+ */
+ size_t rxsize;
+ /**
+ * @brief Received bytes so far.
+ */
+ size_t rxcnt;
+ union {
+ struct {
+ /**
+ * @brief Pointer to the receive linear buffer.
+ */
+ uint8_t *rxbuf;
+ } linear;
+ struct {
+ /**
+ * @brief Pointer to the input queue.
+ */
+ InputQueue *rxqueue;
+ } queue;
+ } mode;
+} USBOutEndpointState;
+
+/**
+ * @brief Type of an USB endpoint configuration structure.
+ * @note Platform specific restrictions may apply to endpoints.
+ */
+typedef struct {
+ /**
+ * @brief Type and mode of the endpoint.
+ */
+ uint32_t ep_mode;
+ /**
+ * @brief Setup packet notification callback.
+ * @details This callback is invoked when a setup packet has been
+ * received.
+ * @post The application must immediately call @p usbReadPacket() in
+ * order to access the received packet.
+ * @note This field is only valid for @p USB_EP_MODE_TYPE_CTRL
+ * endpoints, it should be set to @p NULL for other endpoint
+ * types.
+ */
+ usbepcallback_t setup_cb;
+ /**
+ * @brief IN endpoint notification callback.
+ * @details This field must be set to @p NULL if the IN endpoint is not
+ * used.
+ */
+ usbepcallback_t in_cb;
+ /**
+ * @brief OUT endpoint notification callback.
+ * @details This field must be set to @p NULL if the OUT endpoint is not
+ * used.
+ */
+ usbepcallback_t out_cb;
+ /**
+ * @brief IN endpoint maximum packet size.
+ * @details This field must be set to zero if the IN endpoint is not
+ * used.
+ */
+ uint16_t in_maxsize;
+ /**
+ * @brief OUT endpoint maximum packet size.
+ * @details This field must be set to zero if the OUT endpoint is not
+ * used.
+ */
+ uint16_t out_maxsize;
+ /**
+ * @brief @p USBEndpointState associated to the IN endpoint.
+ * @details This structure maintains the state of the IN endpoint.
+ */
+ USBInEndpointState *in_state;
+ /**
+ * @brief @p USBEndpointState associated to the OUT endpoint.
+ * @details This structure maintains the state of the OUT endpoint.
+ */
+ USBOutEndpointState *out_state;
+ /* End of the mandatory fields.*/
+ /**
+ * @brief Determines the space allocated for the TXFIFO as multiples of
+ * the packet size (@p in_maxsize). Note that zero is interpreted
+ * as one for simplicity and robustness.
+ */
+ uint16_t in_multiplier;
+ /**
+ * @brief Pointer to a buffer for setup packets.
+ * @details Setup packets require a dedicated 8-bytes buffer, set this
+ * field to @p NULL for non-control endpoints.
+ */
+ uint8_t *setup_buf;
+} USBEndpointConfig;
+
+/**
+ * @brief Type of an USB driver configuration structure.
+ */
+typedef struct {
+ /**
+ * @brief USB events callback.
+ * @details This callback is invoked when an USB driver event is registered.
+ */
+ usbeventcb_t event_cb;
+ /**
+ * @brief Device GET_DESCRIPTOR request callback.
+ * @note This callback is mandatory and cannot be set to @p NULL.
+ */
+ usbgetdescriptor_t get_descriptor_cb;
+ /**
+ * @brief Requests hook callback.
+ * @details This hook allows to be notified of standard requests or to
+ * handle non standard requests.
+ */
+ usbreqhandler_t requests_hook_cb;
+ /**
+ * @brief Start Of Frame callback.
+ */
+ usbcallback_t sof_cb;
+ /* End of the mandatory fields.*/
+} USBConfig;
+
+/**
+ * @brief Structure representing an USB driver.
+ */
+struct USBDriver {
+ /**
+ * @brief Driver state.
+ */
+ usbstate_t state;
+ /**
+ * @brief Current configuration data.
+ */
+ const USBConfig *config;
+ /**
+ * @brief Bit map of the transmitting IN endpoints.
+ */
+ uint16_t transmitting;
+ /**
+ * @brief Bit map of the receiving OUT endpoints.
+ */
+ uint16_t receiving;
+ /**
+ * @brief Active endpoints configurations.
+ */
+ const USBEndpointConfig *epc[USB_MAX_ENDPOINTS + 1];
+ /**
+ * @brief Fields available to user, it can be used to associate an
+ * application-defined handler to an IN endpoint.
+ * @note The base index is one, the endpoint zero does not have a
+ * reserved element in this array.
+ */
+ void *in_params[USB_MAX_ENDPOINTS];
+ /**
+ * @brief Fields available to user, it can be used to associate an
+ * application-defined handler to an OUT endpoint.
+ * @note The base index is one, the endpoint zero does not have a
+ * reserved element in this array.
+ */
+ void *out_params[USB_MAX_ENDPOINTS];
+ /**
+ * @brief Endpoint 0 state.
+ */
+ usbep0state_t ep0state;
+ /**
+ * @brief Next position in the buffer to be transferred through endpoint 0.
+ */
+ uint8_t *ep0next;
+ /**
+ * @brief Number of bytes yet to be transferred through endpoint 0.
+ */
+ size_t ep0n;
+ /**
+ * @brief Endpoint 0 end transaction callback.
+ */
+ usbcallback_t ep0endcb;
+ /**
+ * @brief Setup packet buffer.
+ */
+ uint8_t setup[8];
+ /**
+ * @brief Current USB device status.
+ */
+ uint16_t status;
+ /**
+ * @brief Assigned USB address.
+ */
+ uint8_t address;
+ /**
+ * @brief Current USB device configuration.
+ */
+ uint8_t configuration;
+#if defined(USB_DRIVER_EXT_FIELDS)
+ USB_DRIVER_EXT_FIELDS
+#endif
+ /* End of the mandatory fields.*/
+ /**
+ * @brief Pointer to the OTG peripheral associated to this driver.
+ */
+ stm32_otg_t *otg;
+ /**
+ * @brief Peripheral-specific parameters.
+ */
+ const stm32_otg_params_t *otgparams;
+ /**
+ * @brief Pointer to the next address in the packet memory.
+ */
+ uint32_t pmnext;
+ /**
+ * @brief Mask of TXFIFOs to be filled by the pump thread.
+ */
+ uint32_t txpending;
+ /**
+ * @brief Pointer to the thread.
+ */
+ Thread *thd_ptr;
+ /**
+ * @brief Pointer to the thread when it is sleeping or @p NULL.
+ */
+ Thread *thd_wait;
+ /**
+ * @brief Working area for the dedicated data pump thread;
+ */
+ WORKING_AREA(wa_pump, STM32_USB_OTG_THREAD_STACK_SIZE);
+};
+
+/*===========================================================================*/
+/* Driver macros. */
+/*===========================================================================*/
+
+/**
+ * @brief Returns the exact size of a receive transaction.
+ * @details The received size can be different from the size specified in
+ * @p usbStartReceiveI() because the last packet could have a size
+ * different from the expected one.
+ * @pre The OUT endpoint must have been configured in transaction mode
+ * in order to use this function.
+ *
+ * @param[in] usbp pointer to the @p USBDriver object
+ * @param[in] ep endpoint number
+ * @return Received data size.
+ *
+ * @notapi
+ */
+#define usb_lld_get_transaction_size(usbp, ep) \
+ ((usbp)->epc[ep]->out_state->rxcnt)
+
+/**
+ * @brief Connects the USB device.
+ *
+ * @api
+ */
+#define usb_lld_connect_bus(usbp) ((usbp)->otg->GCCFG |= GCCFG_VBUSBSEN)
+
+/**
+ * @brief Disconnect the USB device.
+ *
+ * @api
+ */
+#define usb_lld_disconnect_bus(usbp) ((usbp)->otg->GCCFG &= ~GCCFG_VBUSBSEN)
+
+/*===========================================================================*/
+/* External declarations. */
+/*===========================================================================*/
+
+#if STM32_USB_USE_OTG1 && !defined(__DOXYGEN__)
+extern USBDriver USBD1;
+#endif
+
+#if STM32_USB_USE_OTG2 && !defined(__DOXYGEN__)
+extern USBDriver USBD2;
+#endif
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+ void usb_lld_init(void);
+ void usb_lld_start(USBDriver *usbp);
+ void usb_lld_stop(USBDriver *usbp);
+ void usb_lld_reset(USBDriver *usbp);
+ void usb_lld_set_address(USBDriver *usbp);
+ void usb_lld_init_endpoint(USBDriver *usbp, usbep_t ep);
+ void usb_lld_disable_endpoints(USBDriver *usbp);
+ usbepstatus_t usb_lld_get_status_in(USBDriver *usbp, usbep_t ep);
+ usbepstatus_t usb_lld_get_status_out(USBDriver *usbp, usbep_t ep);
+ void usb_lld_read_setup(USBDriver *usbp, usbep_t ep, uint8_t *buf);
+ void usb_lld_prepare_receive(USBDriver *usbp, usbep_t ep);
+ void usb_lld_prepare_transmit(USBDriver *usbp, usbep_t ep);
+ void usb_lld_start_out(USBDriver *usbp, usbep_t ep);
+ void usb_lld_start_in(USBDriver *usbp, usbep_t ep);
+ void usb_lld_stall_out(USBDriver *usbp, usbep_t ep);
+ void usb_lld_stall_in(USBDriver *usbp, usbep_t ep);
+ void usb_lld_clear_out(USBDriver *usbp, usbep_t ep);
+ void usb_lld_clear_in(USBDriver *usbp, usbep_t ep);
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* HAL_USE_USB */
+
+#endif /* _USB_LLD_H_ */
+
+/** @} */
diff --git a/os/hal/platforms/STM32/RTCv1/rtc_lld.c b/os/hal/platforms/STM32/RTCv1/rtc_lld.c new file mode 100644 index 000000000..108d94fb6 --- /dev/null +++ b/os/hal/platforms/STM32/RTCv1/rtc_lld.c @@ -0,0 +1,329 @@ +/*
+ ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+/*
+ Concepts and parts of this file have been contributed by Uladzimir Pylinsky
+ aka barthess.
+ */
+
+/**
+ * @file STM32/RTCv1/rtc_lld.c
+ * @brief STM32 RTC subsystem low level driver header.
+ *
+ * @addtogroup RTC
+ * @{
+ */
+
+#include "ch.h"
+#include "hal.h"
+
+#if HAL_USE_RTC || defined(__DOXYGEN__)
+
+/*===========================================================================*/
+/* Driver local definitions. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver exported variables. */
+/*===========================================================================*/
+
+/**
+ * @brief RTC driver identifier.
+ */
+RTCDriver RTCD1;
+
+/*===========================================================================*/
+/* Driver local variables and types. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver local functions. */
+/*===========================================================================*/
+
+/**
+ * @brief Wait for synchronization of RTC registers with APB1 bus.
+ * @details This function must be invoked before trying to read RTC registers
+ * in the backup domain: DIV, CNT, ALR. CR registers can always
+ * be read.
+ *
+ * @notapi
+ */
+#define rtc_lld_apb1_sync() {while ((RTC->CRL & RTC_CRL_RSF) == 0);}
+
+/**
+ * @brief Wait for for previous write operation complete.
+ * @details This function must be invoked before writing to any RTC registers
+ *
+ * @notapi
+ */
+#define rtc_lld_wait_write() {while ((RTC->CRL & RTC_CRL_RTOFF) == 0);}
+
+/**
+ * @brief Acquires write access to RTC registers.
+ * @details Before writing to the backup domain RTC registers the previous
+ * write operation must be completed. Use this function before
+ * writing to PRL, CNT, ALR registers.
+ *
+ * @notapi
+ */
+#define rtc_lld_acquire() {rtc_lld_wait_write(); RTC->CRL |= RTC_CRL_CNF;}
+
+/**
+ * @brief Releases write access to RTC registers.
+ *
+ * @notapi
+ */
+#define rtc_lld_release() {RTC->CRL &= ~RTC_CRL_CNF;}
+
+/*===========================================================================*/
+/* Driver interrupt handlers. */
+/*===========================================================================*/
+
+/**
+ * @brief RTC interrupt handler.
+ *
+ * @isr
+ */
+CH_IRQ_HANDLER(RTC_IRQHandler) {
+ uint16_t flags;
+
+ CH_IRQ_PROLOGUE();
+
+ /* This wait works only when AHB1 bus was previously powered off by any
+ reason (standby, reset, etc). In other cases it does nothing.*/
+ rtc_lld_apb1_sync();
+
+ /* Mask of all enabled and pending sources.*/
+ flags = RTC->CRH & RTC->CRL;
+ RTC->CRL &= ~(RTC_CRL_SECF | RTC_CRL_ALRF | RTC_CRL_OWF);
+
+ if (flags & RTC_CRL_SECF)
+ RTCD1.callback(&RTCD1, RTC_EVENT_SECOND);
+
+ if (flags & RTC_CRL_ALRF)
+ RTCD1.callback(&RTCD1, RTC_EVENT_ALARM);
+
+ if (flags & RTC_CRL_OWF)
+ RTCD1.callback(&RTCD1, RTC_EVENT_OVERFLOW);
+
+ CH_IRQ_EPILOGUE();
+}
+
+/*===========================================================================*/
+/* Driver exported functions. */
+/*===========================================================================*/
+
+/**
+ * @brief Load value of RTCCLK to prescaler registers.
+ * @note The pre-scaler must not be set on every reset as RTC clock
+ * counts are lost when it is set.
+ * @note This function designed to be called from
+ * hal_lld_backup_domain_init(). Because there is only place
+ * where possible to detect BKP domain reset event reliably.
+ *
+ * @notapi
+ */
+void rtc_lld_set_prescaler(void){
+ rtc_lld_acquire();
+ RTC->PRLH = (uint16_t)((STM32_RTCCLK - 1) >> 16) & 0x000F;
+ RTC->PRLL = (uint16_t)(((STM32_RTCCLK - 1)) & 0xFFFF);
+ rtc_lld_release();
+}
+
+/**
+ * @brief Initialize RTC.
+ *
+ * @notapi
+ */
+void rtc_lld_init(void){
+
+ /* RSF bit must be cleared by software after an APB1 reset or an APB1 clock
+ stop. Otherwise its value will not be actual. */
+ RTC->CRL &= ~RTC_CRL_RSF;
+
+ /* Required because access to PRL.*/
+ rtc_lld_apb1_sync();
+
+ /* All interrupts initially disabled.*/
+ rtc_lld_wait_write();
+ RTC->CRH = 0;
+
+ /* Callback initially disabled.*/
+ RTCD1.callback = NULL;
+
+ /* IRQ vector permanently assigned to this driver.*/
+ nvicEnableVector(RTC_IRQn, CORTEX_PRIORITY_MASK(STM32_RTC_IRQ_PRIORITY));
+}
+
+/**
+ * @brief Set current time.
+ * @note Fractional part will be silently ignored. There is no possibility
+ * to change it on STM32F1xx platform.
+ *
+ * @param[in] rtcp pointer to RTC driver structure
+ * @param[in] timespec pointer to a @p RTCTime structure
+ *
+ * @notapi
+ */
+void rtc_lld_set_time(RTCDriver *rtcp, const RTCTime *timespec) {
+
+ (void)rtcp;
+
+ rtc_lld_acquire();
+ RTC->CNTH = (uint16_t)(timespec->tv_sec >> 16);
+ RTC->CNTL = (uint16_t)(timespec->tv_sec & 0xFFFF);
+ rtc_lld_release();
+}
+
+/**
+ * @brief Get current time.
+ *
+ * @param[in] rtcp pointer to RTC driver structure
+ * @param[in] timespec pointer to a @p RTCTime structure
+ *
+ * @notapi
+ */
+void rtc_lld_get_time(RTCDriver *rtcp, RTCTime *timespec) {
+ (void)rtcp;
+
+ uint32_t time_frac;
+
+ /* Required because access to CNT and DIV.*/
+ rtc_lld_apb1_sync();
+
+ /* Loops until two consecutive read returning the same value.*/
+ do {
+ timespec->tv_sec = ((uint32_t)(RTC->CNTH) << 16) + RTC->CNTL;
+ time_frac = (((uint32_t)RTC->DIVH) << 16) + (uint32_t)RTC->DIVL;
+ } while ((timespec->tv_sec) != (((uint32_t)(RTC->CNTH) << 16) + RTC->CNTL));
+
+ timespec->tv_msec = (uint16_t)(((STM32_RTCCLK - 1 - time_frac) * 1000) /
+ STM32_RTCCLK);
+}
+
+/**
+ * @brief Set alarm time.
+ *
+ * @note Default value after BKP domain reset is 0xFFFFFFFF
+ *
+ * @param[in] rtcp pointer to RTC driver structure
+ * @param[in] alarm alarm identifier
+ * @param[in] alarmspec pointer to a @p RTCAlarm structure
+ *
+ * @notapi
+ */
+void rtc_lld_set_alarm(RTCDriver *rtcp,
+ rtcalarm_t alarm,
+ const RTCAlarm *alarmspec) {
+
+ (void)rtcp;
+ (void)alarm;
+
+ rtc_lld_acquire();
+ if (alarmspec != NULL) {
+ RTC->ALRH = (uint16_t)(alarmspec->tv_sec >> 16);
+ RTC->ALRL = (uint16_t)(alarmspec->tv_sec & 0xFFFF);
+ }
+ else {
+ RTC->ALRH = 0;
+ RTC->ALRL = 0;
+ }
+ rtc_lld_release();
+}
+
+/**
+ * @brief Get current alarm.
+ * @note If an alarm has not been set then the returned alarm specification
+ * is not meaningful.
+ *
+ * @note Default value after BKP domain reset is 0xFFFFFFFF.
+ *
+ * @param[in] rtcp pointer to RTC driver structure
+ * @param[in] alarm alarm identifier
+ * @param[out] alarmspec pointer to a @p RTCAlarm structure
+ *
+ * @notapi
+ */
+void rtc_lld_get_alarm(RTCDriver *rtcp,
+ rtcalarm_t alarm,
+ RTCAlarm *alarmspec) {
+
+ (void)rtcp;
+ (void)alarm;
+
+ /* Required because access to ALR.*/
+ rtc_lld_apb1_sync();
+
+ alarmspec->tv_sec = ((RTC->ALRH << 16) + RTC->ALRL);
+}
+
+/**
+ * @brief Enables or disables RTC callbacks.
+ * @details This function enables or disables callbacks, use a @p NULL pointer
+ * in order to disable a callback.
+ *
+ * @param[in] rtcp pointer to RTC driver structure
+ * @param[in] callback callback function pointer or @p NULL
+ *
+ * @notapi
+ */
+void rtc_lld_set_callback(RTCDriver *rtcp, rtccb_t callback) {
+
+ if (callback != NULL) {
+
+ /* IRQ sources enabled only after setting up the callback.*/
+ rtcp->callback = callback;
+
+ rtc_lld_wait_write();
+ RTC->CRL &= ~(RTC_CRL_OWF | RTC_CRL_ALRF | RTC_CRL_SECF);
+ RTC->CRH = RTC_CRH_OWIE | RTC_CRH_ALRIE | RTC_CRH_SECIE;
+ }
+ else {
+ rtc_lld_wait_write();
+ RTC->CRH = 0;
+
+ /* Callback set to NULL only after disabling the IRQ sources.*/
+ rtcp->callback = NULL;
+ }
+}
+
+#include "chrtclib.h"
+
+/**
+ * @brief Get current time in format suitable for usage in FatFS.
+ *
+ * @param[in] rtcp pointer to RTC driver structure
+ * @return FAT time value.
+ *
+ * @api
+ */
+uint32_t rtc_lld_get_time_fat(RTCDriver *rtcp) {
+ uint32_t fattime;
+ struct tm timp;
+
+ rtcGetTimeTm(rtcp, &timp);
+
+ fattime = (timp.tm_sec) >> 1;
+ fattime |= (timp.tm_min) << 5;
+ fattime |= (timp.tm_hour) << 11;
+ fattime |= (timp.tm_mday) << 16;
+ fattime |= (timp.tm_mon + 1) << 21;
+ fattime |= (timp.tm_year - 80) << 25;
+
+ return fattime;
+}
+#endif /* HAL_USE_RTC */
+
+/** @} */
diff --git a/os/hal/platforms/STM32/RTCv1/rtc_lld.h b/os/hal/platforms/STM32/RTCv1/rtc_lld.h new file mode 100644 index 000000000..62b74cc46 --- /dev/null +++ b/os/hal/platforms/STM32/RTCv1/rtc_lld.h @@ -0,0 +1,187 @@ +/*
+ ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+/*
+ Concepts and parts of this file have been contributed by Uladzimir Pylinsky
+ aka barthess.
+ */
+
+/**
+ * @file STM32/RTCv1/rtc_lld.h
+ * @brief STM32F1xx RTC subsystem low level driver header.
+ *
+ * @addtogroup RTC
+ * @{
+ */
+
+#ifndef _RTC_LLD_H_
+#define _RTC_LLD_H_
+
+#if HAL_USE_RTC || defined(__DOXYGEN__)
+
+/*===========================================================================*/
+/* Driver constants. */
+/*===========================================================================*/
+
+/**
+ * @brief This RTC implementation supports callbacks.
+ */
+#define RTC_SUPPORTS_CALLBACKS TRUE
+
+/**
+ * @brief One alarm comparator available.
+ */
+#define RTC_ALARMS 1
+
+/*===========================================================================*/
+/* Driver pre-compile time settings. */
+/*===========================================================================*/
+
+/**
+ * @name Configuration options
+ * @{
+ */
+/*
+ * RTC driver system settings.
+ */
+#define STM32_RTC_IRQ_PRIORITY 15
+/** @} */
+
+/*===========================================================================*/
+/* Derived constants and error checks. */
+/*===========================================================================*/
+
+#if HAL_USE_RTC && !STM32_HAS_RTC
+#error "RTC not present in the selected device"
+#endif
+
+#if STM32_RTCCLK == 0
+#error "RTC clock not enabled"
+#endif
+
+/*===========================================================================*/
+/* Driver data structures and types. */
+/*===========================================================================*/
+
+/**
+ * @brief Type of a structure representing an RTC alarm time stamp.
+ */
+typedef struct RTCAlarm RTCAlarm;
+
+/**
+ * @brief Type of a structure representing an RTC callbacks config.
+ */
+typedef struct RTCCallbackConfig RTCCallbackConfig;
+
+/**
+ * @brief Type of an RTC alarm.
+ * @details Meaningful on platforms with more than 1 alarm comparator.
+ */
+typedef uint32_t rtcalarm_t;
+
+/**
+ * @brief Type of an RTC event.
+ */
+typedef enum {
+ RTC_EVENT_SECOND = 0, /** Triggered every second. */
+ RTC_EVENT_ALARM = 1, /** Triggered on alarm. */
+ RTC_EVENT_OVERFLOW = 2 /** Triggered on counter overflow. */
+} rtcevent_t;
+
+/**
+ * @brief Type of a generic RTC callback.
+ */
+typedef void (*rtccb_t)(RTCDriver *rtcp, rtcevent_t event);
+
+/**
+ * @brief Structure representing an RTC callbacks config.
+ */
+struct RTCCallbackConfig{
+ /**
+ * @brief Generic RTC callback pointer.
+ */
+ rtccb_t callback;
+};
+
+/**
+ * @brief Structure representing an RTC time stamp.
+ */
+struct RTCTime {
+ /**
+ * @brief Seconds since UNIX epoch.
+ */
+ uint32_t tv_sec;
+ /**
+ * @brief Fractional part.
+ */
+ uint32_t tv_msec;
+};
+
+/**
+ * @brief Structure representing an RTC alarm time stamp.
+ */
+struct RTCAlarm {
+ /**
+ * @brief Seconds since UNIX epoch.
+ */
+ uint32_t tv_sec;
+};
+
+/**
+ * @brief Structure representing an RTC driver.
+ */
+struct RTCDriver{
+ /**
+ * @brief Callback pointer.
+ */
+ rtccb_t callback;
+};
+
+/*===========================================================================*/
+/* Driver macros. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* External declarations. */
+/*===========================================================================*/
+
+#if !defined(__DOXYGEN__)
+extern RTCDriver RTCD1;
+#endif
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+ void rtc_lld_set_prescaler(void);
+ void rtc_lld_init(void);
+ void rtc_lld_set_time(RTCDriver *rtcp, const RTCTime *timespec);
+ void rtc_lld_get_time(RTCDriver *rtcp, RTCTime *timespec);
+ void rtc_lld_set_alarm(RTCDriver *rtcp,
+ rtcalarm_t alarm,
+ const RTCAlarm *alarmspec);
+ void rtc_lld_get_alarm(RTCDriver *rtcp,
+ rtcalarm_t alarm,
+ RTCAlarm *alarmspec);
+ void rtc_lld_set_callback(RTCDriver *rtcp, rtccb_t callback);
+ uint32_t rtc_lld_get_time_fat(RTCDriver *rtcp);
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* HAL_USE_RTC */
+
+#endif /* _RTC_LLD_H_ */
+
+/** @} */
diff --git a/os/hal/platforms/STM32/RTCv2/rtc_lld.c b/os/hal/platforms/STM32/RTCv2/rtc_lld.c new file mode 100644 index 000000000..17ae46ccf --- /dev/null +++ b/os/hal/platforms/STM32/RTCv2/rtc_lld.c @@ -0,0 +1,322 @@ +/*
+ ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+/*
+ Concepts and parts of this file have been contributed by Uladzimir Pylinsky
+ aka barthess.
+ */
+
+/**
+ * @file STM32/RTCv2/rtc_lld.c
+ * @brief STM32L1xx/STM32F2xx/STM32F4xx RTC low level driver.
+ *
+ * @addtogroup RTC
+ * @{
+ */
+
+#include "ch.h"
+#include "hal.h"
+
+#if HAL_USE_RTC || defined(__DOXYGEN__)
+
+/*===========================================================================*/
+/* Driver local definitions. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver exported variables. */
+/*===========================================================================*/
+
+/**
+ * @brief RTC driver identifier.
+ */
+RTCDriver RTCD1;
+
+/*===========================================================================*/
+/* Driver local variables and types. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver local functions. */
+/*===========================================================================*/
+/**
+ * @brief Wait for synchronization of RTC registers with APB1 bus.
+ * @details This function must be invoked before trying to read RTC registers.
+ *
+ * @notapi
+ */
+#define rtc_lld_apb1_sync() {while ((RTCD1.id_rtc->ISR & RTC_ISR_RSF) == 0);}
+
+/**
+ * @brief Beginning of configuration procedure.
+ *
+ * @notapi
+ */
+#define rtc_lld_enter_init() { \
+ RTCD1.id_rtc->ISR |= RTC_ISR_INIT; \
+ while ((RTCD1.id_rtc->ISR & RTC_ISR_INITF) == 0) \
+ ; \
+}
+
+/**
+ * @brief Finalizing of configuration procedure.
+ *
+ * @notapi
+ */
+#define rtc_lld_exit_init() {RTCD1.id_rtc->ISR &= ~RTC_ISR_INIT;}
+
+/*===========================================================================*/
+/* Driver interrupt handlers. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver exported functions. */
+/*===========================================================================*/
+
+/**
+ * @brief Enable access to registers.
+ *
+ * @api
+ */
+void rtc_lld_init(void){
+ RTCD1.id_rtc = RTC;
+
+ /* Asynchronous part of preloader. Set it to maximum value. */
+ uint32_t prediv_a = 0x7F;
+
+ /* Disable write protection. */
+ RTCD1.id_rtc->WPR = 0xCA;
+ RTCD1.id_rtc->WPR = 0x53;
+
+ /* If calendar not init yet. */
+ if (!(RTC->ISR & RTC_ISR_INITS)){
+ rtc_lld_enter_init();
+
+ /* Prescaler register must be written in two SEPARATE writes. */
+ prediv_a = (prediv_a << 16) |
+ (((STM32_RTCCLK / (prediv_a + 1)) - 1) & 0x7FFF);
+ RTCD1.id_rtc->PRER = prediv_a;
+ RTCD1.id_rtc->PRER = prediv_a;
+ rtc_lld_exit_init();
+ }
+}
+
+/**
+ * @brief Set current time.
+ * @note Fractional part will be silently ignored. There is no possibility
+ * to set it on STM32 platform.
+ *
+ * @param[in] rtcp pointer to RTC driver structure
+ * @param[in] timespec pointer to a @p RTCTime structure
+ *
+ * @api
+ */
+void rtc_lld_set_time(RTCDriver *rtcp, const RTCTime *timespec) {
+ (void)rtcp;
+
+ rtc_lld_enter_init();
+ if (timespec->h12)
+ RTCD1.id_rtc->CR |= RTC_CR_FMT;
+ else
+ RTCD1.id_rtc->CR &= ~RTC_CR_FMT;
+ RTCD1.id_rtc->TR = timespec->tv_time;
+ RTCD1.id_rtc->DR = timespec->tv_date;
+ rtc_lld_exit_init();
+}
+
+/**
+ * @brief Get current time.
+ *
+ * @param[in] rtcp pointer to RTC driver structure
+ * @param[out] timespec pointer to a @p RTCTime structure
+ *
+ * @api
+ */
+void rtc_lld_get_time(RTCDriver *rtcp, RTCTime *timespec) {
+ (void)rtcp;
+
+ rtc_lld_apb1_sync();
+
+#if STM32_RTC_HAS_SUBSECONDS
+ timespec->tv_msec =
+ (1000 * ((RTCD1.id_rtc->PRER & 0x7FFF) - RTCD1.id_rtc->SSR)) /
+ ((RTCD1.id_rtc->PRER & 0x7FFF) + 1);
+#endif /* STM32_RTC_HAS_SUBSECONDS */
+ timespec->tv_time = RTCD1.id_rtc->TR;
+ timespec->tv_date = RTCD1.id_rtc->DR;
+}
+
+/**
+ * @brief Set alarm time.
+ *
+ * @note Default value after BKP domain reset for both comparators is 0.
+ * @note Function does not performs any checks of alarm time validity.
+ *
+ * @param[in] rtcp Pointer to RTC driver structure.
+ * @param[in] alarm Alarm identifier. Can be 1 or 2.
+ * @param[in] alarmspec Pointer to a @p RTCAlarm structure.
+ *
+ * @api
+ */
+void rtc_lld_set_alarm(RTCDriver *rtcp,
+ rtcalarm_t alarm,
+ const RTCAlarm *alarmspec) {
+ if (alarm == 1){
+ if (alarmspec != NULL){
+ rtcp->id_rtc->CR &= ~RTC_CR_ALRAE;
+ while(!(rtcp->id_rtc->ISR & RTC_ISR_ALRAWF))
+ ;
+ rtcp->id_rtc->ALRMAR = alarmspec->tv_datetime;
+ rtcp->id_rtc->CR |= RTC_CR_ALRAE;
+ rtcp->id_rtc->CR |= RTC_CR_ALRAIE;
+ }
+ else {
+ rtcp->id_rtc->CR &= ~RTC_CR_ALRAIE;
+ rtcp->id_rtc->CR &= ~RTC_CR_ALRAE;
+ }
+ }
+ else{
+ if (alarmspec != NULL){
+ rtcp->id_rtc->CR &= ~RTC_CR_ALRBE;
+ while(!(rtcp->id_rtc->ISR & RTC_ISR_ALRBWF))
+ ;
+ rtcp->id_rtc->ALRMBR = alarmspec->tv_datetime;
+ rtcp->id_rtc->CR |= RTC_CR_ALRBE;
+ rtcp->id_rtc->CR |= RTC_CR_ALRBIE;
+ }
+ else {
+ rtcp->id_rtc->CR &= ~RTC_CR_ALRBIE;
+ rtcp->id_rtc->CR &= ~RTC_CR_ALRBE;
+ }
+ }
+}
+
+/**
+ * @brief Get alarm time.
+ *
+ * @param[in] rtcp pointer to RTC driver structure
+ * @param[in] alarm alarm identifier
+ * @param[out] alarmspec pointer to a @p RTCAlarm structure
+ *
+ * @api
+ */
+void rtc_lld_get_alarm(RTCDriver *rtcp,
+ rtcalarm_t alarm,
+ RTCAlarm *alarmspec) {
+ if (alarm == 1)
+ alarmspec->tv_datetime = rtcp->id_rtc->ALRMAR;
+ else
+ alarmspec->tv_datetime = rtcp->id_rtc->ALRMBR;
+}
+
+/**
+ * @brief Sets time of periodic wakeup.
+ *
+ * @note Default value after BKP domain reset is 0x0000FFFF
+ *
+ * @param[in] rtcp pointer to RTC driver structure
+ * @param[in] wakeupspec pointer to a @p RTCWakeup structure
+ *
+ * @api
+ */
+void rtcSetPeriodicWakeup_v2(RTCDriver *rtcp, RTCWakeup *wakeupspec){
+ chDbgCheck((wakeupspec->wakeup != 0x30000),
+ "rtc_lld_set_periodic_wakeup, forbidden combination");
+
+ if (wakeupspec != NULL){
+ rtcp->id_rtc->CR &= ~RTC_CR_WUTE;
+ while(!(rtcp->id_rtc->ISR & RTC_ISR_WUTWF))
+ ;
+ rtcp->id_rtc->WUTR = wakeupspec->wakeup & 0xFFFF;
+ rtcp->id_rtc->CR = (wakeupspec->wakeup >> 16) & 0x7;
+ rtcp->id_rtc->CR |= RTC_CR_WUTIE;
+ rtcp->id_rtc->CR |= RTC_CR_WUTE;
+ }
+ else {
+ rtcp->id_rtc->CR &= ~RTC_CR_WUTIE;
+ rtcp->id_rtc->CR &= ~RTC_CR_WUTE;
+ }
+}
+
+/**
+ * @brief Gets time of periodic wakeup.
+ *
+ * @note Default value after BKP domain reset is 0x0000FFFF
+ *
+ * @param[in] rtcp pointer to RTC driver structure
+ * @param[out] wakeupspec pointer to a @p RTCWakeup structure
+ *
+ * @api
+ */
+void rtcGetPeriodicWakeup_v2(RTCDriver *rtcp, RTCWakeup *wakeupspec){
+ wakeupspec->wakeup = 0;
+ wakeupspec->wakeup |= rtcp->id_rtc->WUTR;
+ wakeupspec->wakeup |= (((uint32_t)rtcp->id_rtc->CR) & 0x7) << 16;
+}
+
+/**
+ * @brief Get current time in format suitable for usage in FatFS.
+ *
+ * @param[in] rtcp pointer to RTC driver structure
+ * @return FAT time value.
+ *
+ * @api
+ */
+uint32_t rtc_lld_get_time_fat(RTCDriver *rtcp) {
+ uint32_t fattime;
+ RTCTime timespec;
+ uint32_t tv_time;
+ uint32_t tv_date;
+ uint32_t v;
+
+ chSysLock();
+ rtcGetTimeI(rtcp, ×pec);
+ chSysUnlock();
+
+ tv_time = timespec.tv_time;
+ tv_date = timespec.tv_date;
+
+ v = (tv_time & RTC_TR_SU) >> RTC_TR_SU_OFFSET;
+ v += ((tv_time & RTC_TR_ST) >> RTC_TR_ST_OFFSET) * 10;
+ fattime = v >> 1;
+
+ v = (tv_time & RTC_TR_MNU) >> RTC_TR_MNU_OFFSET;
+ v += ((tv_time & RTC_TR_MNT) >> RTC_TR_MNT_OFFSET) * 10;
+ fattime |= v << 5;
+
+ v = (tv_time & RTC_TR_HU) >> RTC_TR_HU_OFFSET;
+ v += ((tv_time & RTC_TR_HT) >> RTC_TR_HT_OFFSET) * 10;
+ v += 12 * ((tv_time & RTC_TR_PM) >> RTC_TR_PM_OFFSET);
+ fattime |= v << 11;
+
+ v = (tv_date & RTC_DR_DU) >> RTC_DR_DU_OFFSET;
+ v += ((tv_date & RTC_DR_DT) >> RTC_DR_DT_OFFSET) * 10;
+ fattime |= v << 16;
+
+ v = (tv_date & RTC_DR_MU) >> RTC_DR_MU_OFFSET;
+ v += ((tv_date & RTC_DR_MT) >> RTC_DR_MT_OFFSET) * 10;
+ fattime |= v << 21;
+
+ v = (tv_date & RTC_DR_YU) >> RTC_DR_YU_OFFSET;
+ v += ((tv_date & RTC_DR_YT) >> RTC_DR_YT_OFFSET) * 10;
+ v += 2000 - 1900 - 80;
+ fattime |= v << 25;
+
+ return fattime;
+}
+
+#endif /* HAL_USE_RTC */
+
+/** @} */
diff --git a/os/hal/platforms/STM32/RTCv2/rtc_lld.h b/os/hal/platforms/STM32/RTCv2/rtc_lld.h new file mode 100644 index 000000000..8e0ce8dd0 --- /dev/null +++ b/os/hal/platforms/STM32/RTCv2/rtc_lld.h @@ -0,0 +1,206 @@ +/*
+ ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+/*
+ Concepts and parts of this file have been contributed by Uladzimir Pylinsky
+ aka barthess.
+ */
+
+/**
+ * @file STM32/RTCv2/rtc_lld.h
+ * @brief STM32L1xx/STM32F2xx/STM32F4xx RTC low level driver header.
+ *
+ * @addtogroup RTC
+ * @{
+ */
+
+#ifndef _RTC_LLD_H_
+#define _RTC_LLD_H_
+
+#if HAL_USE_RTC || defined(__DOXYGEN__)
+
+/*===========================================================================*/
+/* Driver constants. */
+/*===========================================================================*/
+
+/**
+ * @brief Two alarm comparators available on STM32F4x.
+ */
+#define RTC_ALARMS 2
+
+/**
+ * @brief Data offsets in RTC date and time registers.
+ */
+#define RTC_TR_PM_OFFSET 22
+#define RTC_TR_HT_OFFSET 20
+#define RTC_TR_HU_OFFSET 16
+#define RTC_TR_MNT_OFFSET 12
+#define RTC_TR_MNU_OFFSET 8
+#define RTC_TR_ST_OFFSET 4
+#define RTC_TR_SU_OFFSET 0
+
+#define RTC_DR_YT_OFFSET 20
+#define RTC_DR_YU_OFFSET 16
+#define RTC_DR_WDU_OFFSET 13
+#define RTC_DR_MT_OFFSET 12
+#define RTC_DR_MU_OFFSET 8
+#define RTC_DR_DT_OFFSET 4
+#define RTC_DR_DU_OFFSET 0
+
+/*===========================================================================*/
+/* Driver pre-compile time settings. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Derived constants and error checks. */
+/*===========================================================================*/
+
+#if HAL_USE_RTC && !STM32_HAS_RTC
+#error "RTC not present in the selected device"
+#endif
+
+#if !(STM32_RTCSEL == STM32_RTCSEL_LSE) && \
+ !(STM32_RTCSEL == STM32_RTCSEL_LSI) && \
+ !(STM32_RTCSEL == STM32_RTCSEL_HSEDIV)
+#error "invalid source selected for RTC clock"
+#endif
+
+#if !defined(RTC_USE_INTERRUPTS) || defined(__DOXYGEN__)
+#define RTC_USE_INTERRUPTS FALSE
+#endif
+
+#if STM32_PCLK1 < (STM32_RTCCLK * 7)
+#error "STM32_PCLK1 frequency is too low to handle RTC without ugly workaround"
+#endif
+
+/*===========================================================================*/
+/* Driver data structures and types. */
+/*===========================================================================*/
+
+/**
+ * @brief Type of a structure representing an RTC alarm time stamp.
+ */
+typedef struct RTCAlarm RTCAlarm;
+
+/**
+ * @brief Type of a structure representing an RTC wakeup period.
+ */
+typedef struct RTCWakeup RTCWakeup;
+
+/**
+ * @brief Type of a structure representing an RTC callbacks config.
+ */
+typedef struct RTCCallbackConfig RTCCallbackConfig;
+
+/**
+ * @brief Type of an RTC alarm.
+ * @details Meaningful on platforms with more than 1 alarm comparator.
+ */
+typedef uint32_t rtcalarm_t;
+
+/**
+ * @brief Structure representing an RTC time stamp.
+ */
+struct RTCTime {
+ /**
+ * @brief RTC date register in STM32 BCD format.
+ */
+ uint32_t tv_date;
+ /**
+ * @brief RTC time register in STM32 BCD format.
+ */
+ uint32_t tv_time;
+ /**
+ * @brief Set this to TRUE to use 12 hour notation.
+ */
+ bool_t h12;
+ /**
+ * @brief Fractional part of time.
+ */
+#if STM32_RTC_HAS_SUBSECONDS
+ uint32_t tv_msec;
+#endif
+};
+
+/**
+ * @brief Structure representing an RTC alarm time stamp.
+ */
+struct RTCAlarm {
+ /**
+ * @brief Date and time of alarm in STM32 BCD.
+ */
+ uint32_t tv_datetime;
+};
+
+/**
+ * @brief Structure representing an RTC periodic wakeup period.
+ */
+struct RTCWakeup {
+ /**
+ * @brief RTC WUTR register.
+ * @details Bits [15:0] contain value of WUTR register
+ * Bits [18:16] contain value of WUCKSEL bits in CR register
+ *
+ * @note ((WUTR == 0) || (WUCKSEL == 3)) is forbidden combination.
+ */
+ uint32_t wakeup;
+};
+
+/**
+ * @brief Structure representing an RTC driver.
+ */
+struct RTCDriver{
+ /**
+ * @brief Pointer to the RTC registers block.
+ */
+ RTC_TypeDef *id_rtc;
+};
+
+/*===========================================================================*/
+/* Driver macros. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* External declarations. */
+/*===========================================================================*/
+
+#if !defined(__DOXYGEN__)
+extern RTCDriver RTCD1;
+#endif
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+ void rtc_lld_init(void);
+ void rtc_lld_set_time(RTCDriver *rtcp, const RTCTime *timespec);
+ void rtc_lld_get_time(RTCDriver *rtcp, RTCTime *timespec);
+ void rtc_lld_set_alarm(RTCDriver *rtcp,
+ rtcalarm_t alarm,
+ const RTCAlarm *alarmspec);
+ void rtc_lld_get_alarm(RTCDriver *rtcp,
+ rtcalarm_t alarm,
+ RTCAlarm *alarmspec);
+ void rtcSetPeriodicWakeup_v2(RTCDriver *rtcp, RTCWakeup *wakeupspec);
+ void rtcGetPeriodicWakeup_v2(RTCDriver *rtcp, RTCWakeup *wakeupspec);
+ uint32_t rtc_lld_get_time_fat(RTCDriver *rtcp);
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* HAL_USE_RTC */
+
+#endif /* _RTC_LLD_H_ */
+
+/** @} */
diff --git a/os/hal/platforms/STM32/SPIv1/spi_lld.c b/os/hal/platforms/STM32/SPIv1/spi_lld.c new file mode 100644 index 000000000..dad91c6a8 --- /dev/null +++ b/os/hal/platforms/STM32/SPIv1/spi_lld.c @@ -0,0 +1,483 @@ +/*
+ ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+/**
+ * @file STM32/SPIv1/spi_lld.c
+ * @brief STM32 SPI subsystem low level driver source.
+ *
+ * @addtogroup SPI
+ * @{
+ */
+
+#include "ch.h"
+#include "hal.h"
+
+#if HAL_USE_SPI || defined(__DOXYGEN__)
+
+/*===========================================================================*/
+/* Driver local definitions. */
+/*===========================================================================*/
+
+#define SPI1_RX_DMA_CHANNEL \
+ STM32_DMA_GETCHANNEL(STM32_SPI_SPI1_RX_DMA_STREAM, \
+ STM32_SPI1_RX_DMA_CHN)
+
+#define SPI1_TX_DMA_CHANNEL \
+ STM32_DMA_GETCHANNEL(STM32_SPI_SPI1_TX_DMA_STREAM, \
+ STM32_SPI1_TX_DMA_CHN)
+
+#define SPI2_RX_DMA_CHANNEL \
+ STM32_DMA_GETCHANNEL(STM32_SPI_SPI2_RX_DMA_STREAM, \
+ STM32_SPI2_RX_DMA_CHN)
+
+#define SPI2_TX_DMA_CHANNEL \
+ STM32_DMA_GETCHANNEL(STM32_SPI_SPI2_TX_DMA_STREAM, \
+ STM32_SPI2_TX_DMA_CHN)
+
+#define SPI3_RX_DMA_CHANNEL \
+ STM32_DMA_GETCHANNEL(STM32_SPI_SPI3_RX_DMA_STREAM, \
+ STM32_SPI3_RX_DMA_CHN)
+
+#define SPI3_TX_DMA_CHANNEL \
+ STM32_DMA_GETCHANNEL(STM32_SPI_SPI3_TX_DMA_STREAM, \
+ STM32_SPI3_TX_DMA_CHN)
+
+/*===========================================================================*/
+/* Driver exported variables. */
+/*===========================================================================*/
+
+/** @brief SPI1 driver identifier.*/
+#if STM32_SPI_USE_SPI1 || defined(__DOXYGEN__)
+SPIDriver SPID1;
+#endif
+
+/** @brief SPI2 driver identifier.*/
+#if STM32_SPI_USE_SPI2 || defined(__DOXYGEN__)
+SPIDriver SPID2;
+#endif
+
+/** @brief SPI3 driver identifier.*/
+#if STM32_SPI_USE_SPI3 || defined(__DOXYGEN__)
+SPIDriver SPID3;
+#endif
+
+/*===========================================================================*/
+/* Driver local variables and types. */
+/*===========================================================================*/
+
+static uint16_t dummytx;
+static uint16_t dummyrx;
+
+/*===========================================================================*/
+/* Driver local functions. */
+/*===========================================================================*/
+
+/**
+ * @brief Shared end-of-rx service routine.
+ *
+ * @param[in] spip pointer to the @p SPIDriver object
+ * @param[in] flags pre-shifted content of the ISR register
+ */
+static void spi_lld_serve_rx_interrupt(SPIDriver *spip, uint32_t flags) {
+
+ /* DMA errors handling.*/
+#if defined(STM32_SPI_DMA_ERROR_HOOK)
+ if ((flags & (STM32_DMA_ISR_TEIF | STM32_DMA_ISR_DMEIF)) != 0) {
+ STM32_SPI_DMA_ERROR_HOOK(spip);
+ }
+#else
+ (void)flags;
+#endif
+
+ /* Stop everything.*/
+ dmaStreamDisable(spip->dmatx);
+ dmaStreamDisable(spip->dmarx);
+
+ /* Portable SPI ISR code defined in the high level driver, note, it is
+ a macro.*/
+ _spi_isr_code(spip);
+}
+
+/**
+ * @brief Shared end-of-tx service routine.
+ *
+ * @param[in] spip pointer to the @p SPIDriver object
+ * @param[in] flags pre-shifted content of the ISR register
+ */
+static void spi_lld_serve_tx_interrupt(SPIDriver *spip, uint32_t flags) {
+
+ /* DMA errors handling.*/
+#if defined(STM32_SPI_DMA_ERROR_HOOK)
+ (void)spip;
+ if ((flags & (STM32_DMA_ISR_TEIF | STM32_DMA_ISR_DMEIF)) != 0) {
+ STM32_SPI_DMA_ERROR_HOOK(spip);
+ }
+#else
+ (void)spip;
+ (void)flags;
+#endif
+}
+
+/*===========================================================================*/
+/* Driver interrupt handlers. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver exported functions. */
+/*===========================================================================*/
+
+/**
+ * @brief Low level SPI driver initialization.
+ *
+ * @notapi
+ */
+void spi_lld_init(void) {
+
+ dummytx = 0xFFFF;
+
+#if STM32_SPI_USE_SPI1
+ spiObjectInit(&SPID1);
+ SPID1.spi = SPI1;
+ SPID1.dmarx = STM32_DMA_STREAM(STM32_SPI_SPI1_RX_DMA_STREAM);
+ SPID1.dmatx = STM32_DMA_STREAM(STM32_SPI_SPI1_TX_DMA_STREAM);
+ SPID1.rxdmamode = STM32_DMA_CR_CHSEL(SPI1_RX_DMA_CHANNEL) |
+ STM32_DMA_CR_PL(STM32_SPI_SPI1_DMA_PRIORITY) |
+ STM32_DMA_CR_DIR_P2M |
+ STM32_DMA_CR_TCIE |
+ STM32_DMA_CR_DMEIE |
+ STM32_DMA_CR_TEIE;
+ SPID1.txdmamode = STM32_DMA_CR_CHSEL(SPI1_TX_DMA_CHANNEL) |
+ STM32_DMA_CR_PL(STM32_SPI_SPI1_DMA_PRIORITY) |
+ STM32_DMA_CR_DIR_M2P |
+ STM32_DMA_CR_DMEIE |
+ STM32_DMA_CR_TEIE;
+#endif
+
+#if STM32_SPI_USE_SPI2
+ spiObjectInit(&SPID2);
+ SPID2.spi = SPI2;
+ SPID2.dmarx = STM32_DMA_STREAM(STM32_SPI_SPI2_RX_DMA_STREAM);
+ SPID2.dmatx = STM32_DMA_STREAM(STM32_SPI_SPI2_TX_DMA_STREAM);
+ SPID2.rxdmamode = STM32_DMA_CR_CHSEL(SPI2_RX_DMA_CHANNEL) |
+ STM32_DMA_CR_PL(STM32_SPI_SPI2_DMA_PRIORITY) |
+ STM32_DMA_CR_DIR_P2M |
+ STM32_DMA_CR_TCIE |
+ STM32_DMA_CR_DMEIE |
+ STM32_DMA_CR_TEIE;
+ SPID2.txdmamode = STM32_DMA_CR_CHSEL(SPI2_TX_DMA_CHANNEL) |
+ STM32_DMA_CR_PL(STM32_SPI_SPI2_DMA_PRIORITY) |
+ STM32_DMA_CR_DIR_M2P |
+ STM32_DMA_CR_DMEIE |
+ STM32_DMA_CR_TEIE;
+#endif
+
+#if STM32_SPI_USE_SPI3
+ spiObjectInit(&SPID3);
+ SPID3.spi = SPI3;
+ SPID3.dmarx = STM32_DMA_STREAM(STM32_SPI_SPI3_RX_DMA_STREAM);
+ SPID3.dmatx = STM32_DMA_STREAM(STM32_SPI_SPI3_TX_DMA_STREAM);
+ SPID3.rxdmamode = STM32_DMA_CR_CHSEL(SPI3_RX_DMA_CHANNEL) |
+ STM32_DMA_CR_PL(STM32_SPI_SPI3_DMA_PRIORITY) |
+ STM32_DMA_CR_DIR_P2M |
+ STM32_DMA_CR_TCIE |
+ STM32_DMA_CR_DMEIE |
+ STM32_DMA_CR_TEIE;
+ SPID3.txdmamode = STM32_DMA_CR_CHSEL(SPI3_TX_DMA_CHANNEL) |
+ STM32_DMA_CR_PL(STM32_SPI_SPI3_DMA_PRIORITY) |
+ STM32_DMA_CR_DIR_M2P |
+ STM32_DMA_CR_DMEIE |
+ STM32_DMA_CR_TEIE;
+#endif
+}
+
+/**
+ * @brief Configures and activates the SPI peripheral.
+ *
+ * @param[in] spip pointer to the @p SPIDriver object
+ *
+ * @notapi
+ */
+void spi_lld_start(SPIDriver *spip) {
+
+ /* If in stopped state then enables the SPI and DMA clocks.*/
+ if (spip->state == SPI_STOP) {
+#if STM32_SPI_USE_SPI1
+ if (&SPID1 == spip) {
+ bool_t b;
+ b = dmaStreamAllocate(spip->dmarx,
+ STM32_SPI_SPI1_IRQ_PRIORITY,
+ (stm32_dmaisr_t)spi_lld_serve_rx_interrupt,
+ (void *)spip);
+ chDbgAssert(!b, "spi_lld_start(), #1", "stream already allocated");
+ b = dmaStreamAllocate(spip->dmatx,
+ STM32_SPI_SPI1_IRQ_PRIORITY,
+ (stm32_dmaisr_t)spi_lld_serve_tx_interrupt,
+ (void *)spip);
+ chDbgAssert(!b, "spi_lld_start(), #2", "stream already allocated");
+ rccEnableSPI1(FALSE);
+ }
+#endif
+#if STM32_SPI_USE_SPI2
+ if (&SPID2 == spip) {
+ bool_t b;
+ b = dmaStreamAllocate(spip->dmarx,
+ STM32_SPI_SPI2_IRQ_PRIORITY,
+ (stm32_dmaisr_t)spi_lld_serve_rx_interrupt,
+ (void *)spip);
+ chDbgAssert(!b, "spi_lld_start(), #3", "stream already allocated");
+ b = dmaStreamAllocate(spip->dmatx,
+ STM32_SPI_SPI2_IRQ_PRIORITY,
+ (stm32_dmaisr_t)spi_lld_serve_tx_interrupt,
+ (void *)spip);
+ chDbgAssert(!b, "spi_lld_start(), #4", "stream already allocated");
+ rccEnableSPI2(FALSE);
+ }
+#endif
+#if STM32_SPI_USE_SPI3
+ if (&SPID3 == spip) {
+ bool_t b;
+ b = dmaStreamAllocate(spip->dmarx,
+ STM32_SPI_SPI3_IRQ_PRIORITY,
+ (stm32_dmaisr_t)spi_lld_serve_rx_interrupt,
+ (void *)spip);
+ chDbgAssert(!b, "spi_lld_start(), #5", "stream already allocated");
+ b = dmaStreamAllocate(spip->dmatx,
+ STM32_SPI_SPI3_IRQ_PRIORITY,
+ (stm32_dmaisr_t)spi_lld_serve_tx_interrupt,
+ (void *)spip);
+ chDbgAssert(!b, "spi_lld_start(), #6", "stream already allocated");
+ rccEnableSPI3(FALSE);
+ }
+#endif
+
+ /* DMA setup.*/
+ dmaStreamSetPeripheral(spip->dmarx, &spip->spi->DR);
+ dmaStreamSetPeripheral(spip->dmatx, &spip->spi->DR);
+ }
+
+ /* Configuration-specific DMA setup.*/
+ if ((spip->config->cr1 & SPI_CR1_DFF) == 0) {
+ /* Frame width is 8 bits or smaller.*/
+ spip->rxdmamode = (spip->rxdmamode & ~STM32_DMA_CR_SIZE_MASK) |
+ STM32_DMA_CR_PSIZE_BYTE | STM32_DMA_CR_MSIZE_BYTE;
+ spip->txdmamode = (spip->txdmamode & ~STM32_DMA_CR_SIZE_MASK) |
+ STM32_DMA_CR_PSIZE_BYTE | STM32_DMA_CR_MSIZE_BYTE;
+ }
+ else {
+ /* Frame width is larger than 8 bits.*/
+ spip->rxdmamode = (spip->rxdmamode & ~STM32_DMA_CR_SIZE_MASK) |
+ STM32_DMA_CR_PSIZE_HWORD | STM32_DMA_CR_MSIZE_HWORD;
+ spip->txdmamode = (spip->txdmamode & ~STM32_DMA_CR_SIZE_MASK) |
+ STM32_DMA_CR_PSIZE_HWORD | STM32_DMA_CR_MSIZE_HWORD;
+ }
+ /* SPI setup and enable.*/
+ spip->spi->CR1 = 0;
+ spip->spi->CR1 = spip->config->cr1 | SPI_CR1_MSTR | SPI_CR1_SSM |
+ SPI_CR1_SSI;
+ spip->spi->CR2 = SPI_CR2_SSOE | SPI_CR2_RXDMAEN | SPI_CR2_TXDMAEN;
+ spip->spi->CR1 |= SPI_CR1_SPE;
+}
+
+/**
+ * @brief Deactivates the SPI peripheral.
+ *
+ * @param[in] spip pointer to the @p SPIDriver object
+ *
+ * @notapi
+ */
+void spi_lld_stop(SPIDriver *spip) {
+
+ /* If in ready state then disables the SPI clock.*/
+ if (spip->state == SPI_READY) {
+
+ /* SPI disable.*/
+ spip->spi->CR1 = 0;
+ spip->spi->CR2 = 0;
+ dmaStreamRelease(spip->dmarx);
+ dmaStreamRelease(spip->dmatx);
+
+#if STM32_SPI_USE_SPI1
+ if (&SPID1 == spip)
+ rccDisableSPI1(FALSE);
+#endif
+#if STM32_SPI_USE_SPI2
+ if (&SPID2 == spip)
+ rccDisableSPI2(FALSE);
+#endif
+#if STM32_SPI_USE_SPI3
+ if (&SPID3 == spip)
+ rccDisableSPI3(FALSE);
+#endif
+ }
+}
+
+/**
+ * @brief Asserts the slave select signal and prepares for transfers.
+ *
+ * @param[in] spip pointer to the @p SPIDriver object
+ *
+ * @notapi
+ */
+void spi_lld_select(SPIDriver *spip) {
+
+ palClearPad(spip->config->ssport, spip->config->sspad);
+}
+
+/**
+ * @brief Deasserts the slave select signal.
+ * @details The previously selected peripheral is unselected.
+ *
+ * @param[in] spip pointer to the @p SPIDriver object
+ *
+ * @notapi
+ */
+void spi_lld_unselect(SPIDriver *spip) {
+
+ palSetPad(spip->config->ssport, spip->config->sspad);
+}
+
+/**
+ * @brief Ignores data on the SPI bus.
+ * @details This asynchronous function starts the transmission of a series of
+ * idle words on the SPI bus and ignores the received data.
+ * @post At the end of the operation the configured callback is invoked.
+ *
+ * @param[in] spip pointer to the @p SPIDriver object
+ * @param[in] n number of words to be ignored
+ *
+ * @notapi
+ */
+void spi_lld_ignore(SPIDriver *spip, size_t n) {
+
+ dmaStreamSetMemory0(spip->dmarx, &dummyrx);
+ dmaStreamSetTransactionSize(spip->dmarx, n);
+ dmaStreamSetMode(spip->dmarx, spip->rxdmamode);
+
+ dmaStreamSetMemory0(spip->dmatx, &dummytx);
+ dmaStreamSetTransactionSize(spip->dmatx, n);
+ dmaStreamSetMode(spip->dmatx, spip->txdmamode);
+
+ dmaStreamEnable(spip->dmarx);
+ dmaStreamEnable(spip->dmatx);
+}
+
+/**
+ * @brief Exchanges data on the SPI bus.
+ * @details This asynchronous function starts a simultaneous transmit/receive
+ * operation.
+ * @post At the end of the operation the configured callback is invoked.
+ * @note The buffers are organized as uint8_t arrays for data sizes below or
+ * equal to 8 bits else it is organized as uint16_t arrays.
+ *
+ * @param[in] spip pointer to the @p SPIDriver object
+ * @param[in] n number of words to be exchanged
+ * @param[in] txbuf the pointer to the transmit buffer
+ * @param[out] rxbuf the pointer to the receive buffer
+ *
+ * @notapi
+ */
+void spi_lld_exchange(SPIDriver *spip, size_t n,
+ const void *txbuf, void *rxbuf) {
+
+ dmaStreamSetMemory0(spip->dmarx, rxbuf);
+ dmaStreamSetTransactionSize(spip->dmarx, n);
+ dmaStreamSetMode(spip->dmarx, spip->rxdmamode| STM32_DMA_CR_MINC);
+
+ dmaStreamSetMemory0(spip->dmatx, txbuf);
+ dmaStreamSetTransactionSize(spip->dmatx, n);
+ dmaStreamSetMode(spip->dmatx, spip->txdmamode | STM32_DMA_CR_MINC);
+
+ dmaStreamEnable(spip->dmarx);
+ dmaStreamEnable(spip->dmatx);
+}
+
+/**
+ * @brief Sends data over the SPI bus.
+ * @details This asynchronous function starts a transmit operation.
+ * @post At the end of the operation the configured callback is invoked.
+ * @note The buffers are organized as uint8_t arrays for data sizes below or
+ * equal to 8 bits else it is organized as uint16_t arrays.
+ *
+ * @param[in] spip pointer to the @p SPIDriver object
+ * @param[in] n number of words to send
+ * @param[in] txbuf the pointer to the transmit buffer
+ *
+ * @notapi
+ */
+void spi_lld_send(SPIDriver *spip, size_t n, const void *txbuf) {
+
+ dmaStreamSetMemory0(spip->dmarx, &dummyrx);
+ dmaStreamSetTransactionSize(spip->dmarx, n);
+ dmaStreamSetMode(spip->dmarx, spip->rxdmamode);
+
+ dmaStreamSetMemory0(spip->dmatx, txbuf);
+ dmaStreamSetTransactionSize(spip->dmatx, n);
+ dmaStreamSetMode(spip->dmatx, spip->txdmamode | STM32_DMA_CR_MINC);
+
+ dmaStreamEnable(spip->dmarx);
+ dmaStreamEnable(spip->dmatx);
+}
+
+/**
+ * @brief Receives data from the SPI bus.
+ * @details This asynchronous function starts a receive operation.
+ * @post At the end of the operation the configured callback is invoked.
+ * @note The buffers are organized as uint8_t arrays for data sizes below or
+ * equal to 8 bits else it is organized as uint16_t arrays.
+ *
+ * @param[in] spip pointer to the @p SPIDriver object
+ * @param[in] n number of words to receive
+ * @param[out] rxbuf the pointer to the receive buffer
+ *
+ * @notapi
+ */
+void spi_lld_receive(SPIDriver *spip, size_t n, void *rxbuf) {
+
+ dmaStreamSetMemory0(spip->dmarx, rxbuf);
+ dmaStreamSetTransactionSize(spip->dmarx, n);
+ dmaStreamSetMode(spip->dmarx, spip->rxdmamode | STM32_DMA_CR_MINC);
+
+ dmaStreamSetMemory0(spip->dmatx, &dummytx);
+ dmaStreamSetTransactionSize(spip->dmatx, n);
+ dmaStreamSetMode(spip->dmatx, spip->txdmamode);
+
+ dmaStreamEnable(spip->dmarx);
+ dmaStreamEnable(spip->dmatx);
+}
+
+/**
+ * @brief Exchanges one frame using a polled wait.
+ * @details This synchronous function exchanges one frame using a polled
+ * synchronization method. This function is useful when exchanging
+ * small amount of data on high speed channels, usually in this
+ * situation is much more efficient just wait for completion using
+ * polling than suspending the thread waiting for an interrupt.
+ *
+ * @param[in] spip pointer to the @p SPIDriver object
+ * @param[in] frame the data frame to send over the SPI bus
+ * @return The received data frame from the SPI bus.
+ */
+uint16_t spi_lld_polled_exchange(SPIDriver *spip, uint16_t frame) {
+
+ spip->spi->DR = frame;
+ while ((spip->spi->SR & SPI_SR_RXNE) == 0)
+ ;
+ return spip->spi->DR;
+}
+
+#endif /* HAL_USE_SPI */
+
+/** @} */
diff --git a/os/hal/platforms/STM32/SPIv1/spi_lld.h b/os/hal/platforms/STM32/SPIv1/spi_lld.h new file mode 100644 index 000000000..fe37c8f66 --- /dev/null +++ b/os/hal/platforms/STM32/SPIv1/spi_lld.h @@ -0,0 +1,411 @@ +/*
+ ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+/**
+ * @file STM32/SPIv1/spi_lld.h
+ * @brief STM32 SPI subsystem low level driver header.
+ *
+ * @addtogroup SPI
+ * @{
+ */
+
+#ifndef _SPI_LLD_H_
+#define _SPI_LLD_H_
+
+#if HAL_USE_SPI || defined(__DOXYGEN__)
+
+/*===========================================================================*/
+/* Driver constants. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver pre-compile time settings. */
+/*===========================================================================*/
+
+/**
+ * @name Configuration options
+ * @{
+ */
+/**
+ * @brief SPI1 driver enable switch.
+ * @details If set to @p TRUE the support for SPI1 is included.
+ * @note The default is @p TRUE.
+ */
+#if !defined(STM32_SPI_USE_SPI1) || defined(__DOXYGEN__)
+#define STM32_SPI_USE_SPI1 FALSE
+#endif
+
+/**
+ * @brief SPI2 driver enable switch.
+ * @details If set to @p TRUE the support for SPI2 is included.
+ * @note The default is @p TRUE.
+ */
+#if !defined(STM32_SPI_USE_SPI2) || defined(__DOXYGEN__)
+#define STM32_SPI_USE_SPI2 FALSE
+#endif
+
+/**
+ * @brief SPI3 driver enable switch.
+ * @details If set to @p TRUE the support for SPI3 is included.
+ * @note The default is @p TRUE.
+ */
+#if !defined(STM32_SPI_USE_SPI3) || defined(__DOXYGEN__)
+#define STM32_SPI_USE_SPI3 FALSE
+#endif
+
+/**
+ * @brief SPI1 interrupt priority level setting.
+ */
+#if !defined(STM32_SPI_SPI1_IRQ_PRIORITY) || defined(__DOXYGEN__)
+#define STM32_SPI_SPI1_IRQ_PRIORITY 10
+#endif
+
+/**
+ * @brief SPI2 interrupt priority level setting.
+ */
+#if !defined(STM32_SPI_SPI2_IRQ_PRIORITY) || defined(__DOXYGEN__)
+#define STM32_SPI_SPI2_IRQ_PRIORITY 10
+#endif
+
+/**
+ * @brief SPI3 interrupt priority level setting.
+ */
+#if !defined(STM32_SPI_SPI3_IRQ_PRIORITY) || defined(__DOXYGEN__)
+#define STM32_SPI_SPI3_IRQ_PRIORITY 10
+#endif
+
+/**
+ * @brief SPI1 DMA priority (0..3|lowest..highest).
+ * @note The priority level is used for both the TX and RX DMA streams but
+ * because of the streams ordering the RX stream has always priority
+ * over the TX stream.
+ */
+#if !defined(STM32_SPI_SPI1_DMA_PRIORITY) || defined(__DOXYGEN__)
+#define STM32_SPI_SPI1_DMA_PRIORITY 1
+#endif
+
+/**
+ * @brief SPI2 DMA priority (0..3|lowest..highest).
+ * @note The priority level is used for both the TX and RX DMA streams but
+ * because of the streams ordering the RX stream has always priority
+ * over the TX stream.
+ */
+#if !defined(STM32_SPI_SPI2_DMA_PRIORITY) || defined(__DOXYGEN__)
+#define STM32_SPI_SPI2_DMA_PRIORITY 1
+#endif
+
+/**
+ * @brief SPI3 DMA priority (0..3|lowest..highest).
+ * @note The priority level is used for both the TX and RX DMA streams but
+ * because of the streams ordering the RX stream has always priority
+ * over the TX stream.
+ */
+#if !defined(STM32_SPI_SPI3_DMA_PRIORITY) || defined(__DOXYGEN__)
+#define STM32_SPI_SPI3_DMA_PRIORITY 1
+#endif
+
+/**
+ * @brief SPI DMA error hook.
+ */
+#if !defined(STM32_SPI_DMA_ERROR_HOOK) || defined(__DOXYGEN__)
+#define STM32_SPI_DMA_ERROR_HOOK(spip) chSysHalt()
+#endif
+
+#if STM32_ADVANCED_DMA || defined(__DOXYGEN__)
+
+/**
+ * @brief DMA stream used for SPI1 RX operations.
+ * @note This option is only available on platforms with enhanced DMA.
+ */
+#if !defined(STM32_SPI_SPI1_RX_DMA_STREAM) || defined(__DOXYGEN__)
+#define STM32_SPI_SPI1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 0)
+#endif
+
+/**
+ * @brief DMA stream used for SPI1 TX operations.
+ * @note This option is only available on platforms with enhanced DMA.
+ */
+#if !defined(STM32_SPI_SPI1_TX_DMA_STREAM) || defined(__DOXYGEN__)
+#define STM32_SPI_SPI1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 3)
+#endif
+
+/**
+ * @brief DMA stream used for SPI2 RX operations.
+ * @note This option is only available on platforms with enhanced DMA.
+ */
+#if !defined(STM32_SPI_SPI2_RX_DMA_STREAM) || defined(__DOXYGEN__)
+#define STM32_SPI_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3)
+#endif
+
+/**
+ * @brief DMA stream used for SPI2 TX operations.
+ * @note This option is only available on platforms with enhanced DMA.
+ */
+#if !defined(STM32_SPI_SPI2_TX_DMA_STREAM) || defined(__DOXYGEN__)
+#define STM32_SPI_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4)
+#endif
+
+/**
+ * @brief DMA stream used for SPI3 RX operations.
+ * @note This option is only available on platforms with enhanced DMA.
+ */
+#if !defined(STM32_SPI_SPI3_RX_DMA_STREAM) || defined(__DOXYGEN__)
+#define STM32_SPI_SPI3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0)
+#endif
+
+/**
+ * @brief DMA stream used for SPI3 TX operations.
+ * @note This option is only available on platforms with enhanced DMA.
+ */
+#if !defined(STM32_SPI_SPI3_TX_DMA_STREAM) || defined(__DOXYGEN__)
+#define STM32_SPI_SPI3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7)
+#endif
+
+#else /* !STM32_ADVANCED_DMA */
+
+/* Fixed streams for platforms using the old DMA peripheral, the values are
+ valid for both STM32F1xx and STM32L1xx.*/
+#define STM32_SPI_SPI1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2)
+#define STM32_SPI_SPI1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3)
+#define STM32_SPI_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4)
+#define STM32_SPI_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5)
+#define STM32_SPI_SPI3_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 1)
+#define STM32_SPI_SPI3_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 2)
+
+#endif /* !STM32_ADVANCED_DMA*/
+/** @} */
+
+/*===========================================================================*/
+/* Derived constants and error checks. */
+/*===========================================================================*/
+
+#if STM32_SPI_USE_SPI1 && !STM32_HAS_SPI1
+#error "SPI1 not present in the selected device"
+#endif
+
+#if STM32_SPI_USE_SPI2 && !STM32_HAS_SPI2
+#error "SPI2 not present in the selected device"
+#endif
+
+#if STM32_SPI_USE_SPI3 && !STM32_HAS_SPI3
+#error "SPI3 not present in the selected device"
+#endif
+
+#if !STM32_SPI_USE_SPI1 && !STM32_SPI_USE_SPI2 && !STM32_SPI_USE_SPI3
+#error "SPI driver activated but no SPI peripheral assigned"
+#endif
+
+#if STM32_SPI_USE_SPI1 && \
+ !CORTEX_IS_VALID_KERNEL_PRIORITY(STM32_SPI_SPI1_IRQ_PRIORITY)
+#error "Invalid IRQ priority assigned to SPI1"
+#endif
+
+#if STM32_SPI_USE_SPI2 && \
+ !CORTEX_IS_VALID_KERNEL_PRIORITY(STM32_SPI_SPI2_IRQ_PRIORITY)
+#error "Invalid IRQ priority assigned to SPI2"
+#endif
+
+#if STM32_SPI_USE_SPI3 && \
+ !CORTEX_IS_VALID_KERNEL_PRIORITY(STM32_SPI_SPI3_IRQ_PRIORITY)
+#error "Invalid IRQ priority assigned to SPI3"
+#endif
+
+#if STM32_SPI_USE_SPI1 && \
+ !STM32_DMA_IS_VALID_PRIORITY(STM32_SPI_SPI1_DMA_PRIORITY)
+#error "Invalid DMA priority assigned to SPI1"
+#endif
+
+#if STM32_SPI_USE_SPI2 && \
+ !STM32_DMA_IS_VALID_PRIORITY(STM32_SPI_SPI2_DMA_PRIORITY)
+#error "Invalid DMA priority assigned to SPI2"
+#endif
+
+#if STM32_SPI_USE_SPI3 && \
+ !STM32_DMA_IS_VALID_PRIORITY(STM32_SPI_SPI3_DMA_PRIORITY)
+#error "Invalid DMA priority assigned to SPI3"
+#endif
+
+#if STM32_SPI_USE_SPI1 && \
+ !STM32_DMA_IS_VALID_ID(STM32_SPI_SPI1_RX_DMA_STREAM, STM32_SPI1_RX_DMA_MSK)
+#error "invalid DMA stream associated to SPI1 RX"
+#endif
+
+#if STM32_SPI_USE_SPI1 && \
+ !STM32_DMA_IS_VALID_ID(STM32_SPI_SPI1_TX_DMA_STREAM, STM32_SPI1_TX_DMA_MSK)
+#error "invalid DMA stream associated to SPI1 TX"
+#endif
+
+#if STM32_SPI_USE_SPI2 && \
+ !STM32_DMA_IS_VALID_ID(STM32_SPI_SPI2_RX_DMA_STREAM, STM32_SPI2_RX_DMA_MSK)
+#error "invalid DMA stream associated to SPI2 RX"
+#endif
+
+#if STM32_SPI_USE_SPI2 && \
+ !STM32_DMA_IS_VALID_ID(STM32_SPI_SPI2_TX_DMA_STREAM, STM32_SPI2_TX_DMA_MSK)
+#error "invalid DMA stream associated to SPI2 TX"
+#endif
+
+#if STM32_SPI_USE_SPI3 && \
+ !STM32_DMA_IS_VALID_ID(STM32_SPI_SPI3_RX_DMA_STREAM, STM32_SPI3_RX_DMA_MSK)
+#error "invalid DMA stream associated to SPI3 RX"
+#endif
+
+#if STM32_SPI_USE_SPI3 && \
+ !STM32_DMA_IS_VALID_ID(STM32_SPI_SPI3_TX_DMA_STREAM, STM32_SPI3_TX_DMA_MSK)
+#error "invalid DMA stream associated to SPI3 TX"
+#endif
+
+#if !defined(STM32_DMA_REQUIRED)
+#define STM32_DMA_REQUIRED
+#endif
+
+/*===========================================================================*/
+/* Driver data structures and types. */
+/*===========================================================================*/
+
+/**
+ * @brief Type of a structure representing an SPI driver.
+ */
+typedef struct SPIDriver SPIDriver;
+
+/**
+ * @brief SPI notification callback type.
+ *
+ * @param[in] spip pointer to the @p SPIDriver object triggering the
+ * callback
+ */
+typedef void (*spicallback_t)(SPIDriver *spip);
+
+/**
+ * @brief Driver configuration structure.
+ */
+typedef struct {
+ /**
+ * @brief Operation complete callback or @p NULL.
+ */
+ spicallback_t end_cb;
+ /* End of the mandatory fields.*/
+ /**
+ * @brief The chip select line port.
+ */
+ ioportid_t ssport;
+ /**
+ * @brief The chip select line pad number.
+ */
+ uint16_t sspad;
+ /**
+ * @brief SPI initialization data.
+ */
+ uint16_t cr1;
+} SPIConfig;
+
+/**
+ * @brief Structure representing a SPI driver.
+ */
+struct SPIDriver{
+ /**
+ * @brief Driver state.
+ */
+ spistate_t state;
+ /**
+ * @brief Current configuration data.
+ */
+ const SPIConfig *config;
+#if SPI_USE_WAIT || defined(__DOXYGEN__)
+ /**
+ * @brief Waiting thread.
+ */
+ Thread *thread;
+#endif /* SPI_USE_WAIT */
+#if SPI_USE_MUTUAL_EXCLUSION || defined(__DOXYGEN__)
+#if CH_USE_MUTEXES || defined(__DOXYGEN__)
+ /**
+ * @brief Mutex protecting the bus.
+ */
+ Mutex mutex;
+#elif CH_USE_SEMAPHORES
+ Semaphore semaphore;
+#endif
+#endif /* SPI_USE_MUTUAL_EXCLUSION */
+#if defined(SPI_DRIVER_EXT_FIELDS)
+ SPI_DRIVER_EXT_FIELDS
+#endif
+ /* End of the mandatory fields.*/
+ /**
+ * @brief Pointer to the SPIx registers block.
+ */
+ SPI_TypeDef *spi;
+ /**
+ * @brief Receive DMA stream.
+ */
+ const stm32_dma_stream_t *dmarx;
+ /**
+ * @brief Transmit DMA stream.
+ */
+ const stm32_dma_stream_t *dmatx;
+ /**
+ * @brief RX DMA mode bit mask.
+ */
+ uint32_t rxdmamode;
+ /**
+ * @brief TX DMA mode bit mask.
+ */
+ uint32_t txdmamode;
+};
+
+/*===========================================================================*/
+/* Driver macros. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* External declarations. */
+/*===========================================================================*/
+
+#if STM32_SPI_USE_SPI1 && !defined(__DOXYGEN__)
+extern SPIDriver SPID1;
+#endif
+
+#if STM32_SPI_USE_SPI2 && !defined(__DOXYGEN__)
+extern SPIDriver SPID2;
+#endif
+
+#if STM32_SPI_USE_SPI3 && !defined(__DOXYGEN__)
+extern SPIDriver SPID3;
+#endif
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+ void spi_lld_init(void);
+ void spi_lld_start(SPIDriver *spip);
+ void spi_lld_stop(SPIDriver *spip);
+ void spi_lld_select(SPIDriver *spip);
+ void spi_lld_unselect(SPIDriver *spip);
+ void spi_lld_ignore(SPIDriver *spip, size_t n);
+ void spi_lld_exchange(SPIDriver *spip, size_t n,
+ const void *txbuf, void *rxbuf);
+ void spi_lld_send(SPIDriver *spip, size_t n, const void *txbuf);
+ void spi_lld_receive(SPIDriver *spip, size_t n, void *rxbuf);
+ uint16_t spi_lld_polled_exchange(SPIDriver *spip, uint16_t frame);
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* HAL_USE_SPI */
+
+#endif /* _SPI_LLD_H_ */
+
+/** @} */
diff --git a/os/hal/platforms/STM32/SPIv2/spi_lld.c b/os/hal/platforms/STM32/SPIv2/spi_lld.c new file mode 100644 index 000000000..712d824f6 --- /dev/null +++ b/os/hal/platforms/STM32/SPIv2/spi_lld.c @@ -0,0 +1,501 @@ +/*
+ ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+/**
+ * @file STM32/SPIv2/spi_lld.c
+ * @brief STM32 SPI subsystem low level driver source.
+ *
+ * @addtogroup SPI
+ * @{
+ */
+
+#include "hal.h"
+
+#if HAL_USE_SPI || defined(__DOXYGEN__)
+
+/*===========================================================================*/
+/* Driver local definitions. */
+/*===========================================================================*/
+
+#define SPI1_RX_DMA_CHANNEL \
+ STM32_DMA_GETCHANNEL(STM32_SPI_SPI1_RX_DMA_STREAM, \
+ STM32_SPI1_RX_DMA_CHN)
+
+#define SPI1_TX_DMA_CHANNEL \
+ STM32_DMA_GETCHANNEL(STM32_SPI_SPI1_TX_DMA_STREAM, \
+ STM32_SPI1_TX_DMA_CHN)
+
+#define SPI2_RX_DMA_CHANNEL \
+ STM32_DMA_GETCHANNEL(STM32_SPI_SPI2_RX_DMA_STREAM, \
+ STM32_SPI2_RX_DMA_CHN)
+
+#define SPI2_TX_DMA_CHANNEL \
+ STM32_DMA_GETCHANNEL(STM32_SPI_SPI2_TX_DMA_STREAM, \
+ STM32_SPI2_TX_DMA_CHN)
+
+#define SPI3_RX_DMA_CHANNEL \
+ STM32_DMA_GETCHANNEL(STM32_SPI_SPI3_RX_DMA_STREAM, \
+ STM32_SPI3_RX_DMA_CHN)
+
+#define SPI3_TX_DMA_CHANNEL \
+ STM32_DMA_GETCHANNEL(STM32_SPI_SPI3_TX_DMA_STREAM, \
+ STM32_SPI3_TX_DMA_CHN)
+
+/*===========================================================================*/
+/* Driver exported variables. */
+/*===========================================================================*/
+
+/** @brief SPI1 driver identifier.*/
+#if STM32_SPI_USE_SPI1 || defined(__DOXYGEN__)
+SPIDriver SPID1;
+#endif
+
+/** @brief SPI2 driver identifier.*/
+#if STM32_SPI_USE_SPI2 || defined(__DOXYGEN__)
+SPIDriver SPID2;
+#endif
+
+/** @brief SPI3 driver identifier.*/
+#if STM32_SPI_USE_SPI3 || defined(__DOXYGEN__)
+SPIDriver SPID3;
+#endif
+
+/*===========================================================================*/
+/* Driver local variables and types. */
+/*===========================================================================*/
+
+static uint16_t dummytx;
+static uint16_t dummyrx;
+
+/*===========================================================================*/
+/* Driver local functions. */
+/*===========================================================================*/
+
+/**
+ * @brief Shared end-of-rx service routine.
+ *
+ * @param[in] spip pointer to the @p SPIDriver object
+ * @param[in] flags pre-shifted content of the ISR register
+ */
+static void spi_lld_serve_rx_interrupt(SPIDriver *spip, uint32_t flags) {
+
+ /* DMA errors handling.*/
+#if defined(STM32_SPI_DMA_ERROR_HOOK)
+ if ((flags & (STM32_DMA_ISR_TEIF | STM32_DMA_ISR_DMEIF)) != 0) {
+ STM32_SPI_DMA_ERROR_HOOK(spip);
+ }
+#else
+ (void)flags;
+#endif
+
+ /* Stop everything.*/
+ dmaStreamDisable(spip->dmatx);
+ dmaStreamDisable(spip->dmarx);
+
+ /* Portable SPI ISR code defined in the high level driver, note, it is
+ a macro.*/
+ _spi_isr_code(spip);
+}
+
+/**
+ * @brief Shared end-of-tx service routine.
+ *
+ * @param[in] spip pointer to the @p SPIDriver object
+ * @param[in] flags pre-shifted content of the ISR register
+ */
+static void spi_lld_serve_tx_interrupt(SPIDriver *spip, uint32_t flags) {
+
+ /* DMA errors handling.*/
+#if defined(STM32_SPI_DMA_ERROR_HOOK)
+ (void)spip;
+ if ((flags & (STM32_DMA_ISR_TEIF | STM32_DMA_ISR_DMEIF)) != 0) {
+ STM32_SPI_DMA_ERROR_HOOK(spip);
+ }
+#else
+ (void)spip;
+ (void)flags;
+#endif
+}
+
+/*===========================================================================*/
+/* Driver interrupt handlers. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver exported functions. */
+/*===========================================================================*/
+
+/**
+ * @brief Low level SPI driver initialization.
+ *
+ * @notapi
+ */
+void spi_lld_init(void) {
+
+ dummytx = 0xFFFF;
+
+#if STM32_SPI_USE_SPI1
+ spiObjectInit(&SPID1);
+ SPID1.spi = SPI1;
+ SPID1.dmarx = STM32_DMA_STREAM(STM32_SPI_SPI1_RX_DMA_STREAM);
+ SPID1.dmatx = STM32_DMA_STREAM(STM32_SPI_SPI1_TX_DMA_STREAM);
+ SPID1.rxdmamode = STM32_DMA_CR_CHSEL(SPI1_RX_DMA_CHANNEL) |
+ STM32_DMA_CR_PL(STM32_SPI_SPI1_DMA_PRIORITY) |
+ STM32_DMA_CR_DIR_P2M |
+ STM32_DMA_CR_TCIE |
+ STM32_DMA_CR_DMEIE |
+ STM32_DMA_CR_TEIE;
+ SPID1.txdmamode = STM32_DMA_CR_CHSEL(SPI1_TX_DMA_CHANNEL) |
+ STM32_DMA_CR_PL(STM32_SPI_SPI1_DMA_PRIORITY) |
+ STM32_DMA_CR_DIR_M2P |
+ STM32_DMA_CR_DMEIE |
+ STM32_DMA_CR_TEIE;
+#endif
+
+#if STM32_SPI_USE_SPI2
+ spiObjectInit(&SPID2);
+ SPID2.spi = SPI2;
+ SPID2.dmarx = STM32_DMA_STREAM(STM32_SPI_SPI2_RX_DMA_STREAM);
+ SPID2.dmatx = STM32_DMA_STREAM(STM32_SPI_SPI2_TX_DMA_STREAM);
+ SPID2.rxdmamode = STM32_DMA_CR_CHSEL(SPI2_RX_DMA_CHANNEL) |
+ STM32_DMA_CR_PL(STM32_SPI_SPI2_DMA_PRIORITY) |
+ STM32_DMA_CR_DIR_P2M |
+ STM32_DMA_CR_TCIE |
+ STM32_DMA_CR_DMEIE |
+ STM32_DMA_CR_TEIE;
+ SPID2.txdmamode = STM32_DMA_CR_CHSEL(SPI2_TX_DMA_CHANNEL) |
+ STM32_DMA_CR_PL(STM32_SPI_SPI2_DMA_PRIORITY) |
+ STM32_DMA_CR_DIR_M2P |
+ STM32_DMA_CR_DMEIE |
+ STM32_DMA_CR_TEIE;
+#endif
+
+#if STM32_SPI_USE_SPI3
+ spiObjectInit(&SPID3);
+ SPID3.spi = SPI3;
+ SPID3.dmarx = STM32_DMA_STREAM(STM32_SPI_SPI3_RX_DMA_STREAM);
+ SPID3.dmatx = STM32_DMA_STREAM(STM32_SPI_SPI3_TX_DMA_STREAM);
+ SPID3.rxdmamode = STM32_DMA_CR_CHSEL(SPI3_RX_DMA_CHANNEL) |
+ STM32_DMA_CR_PL(STM32_SPI_SPI3_DMA_PRIORITY) |
+ STM32_DMA_CR_DIR_P2M |
+ STM32_DMA_CR_TCIE |
+ STM32_DMA_CR_DMEIE |
+ STM32_DMA_CR_TEIE;
+ SPID3.txdmamode = STM32_DMA_CR_CHSEL(SPI3_TX_DMA_CHANNEL) |
+ STM32_DMA_CR_PL(STM32_SPI_SPI3_DMA_PRIORITY) |
+ STM32_DMA_CR_DIR_M2P |
+ STM32_DMA_CR_DMEIE |
+ STM32_DMA_CR_TEIE;
+#endif
+}
+
+/**
+ * @brief Configures and activates the SPI peripheral.
+ *
+ * @param[in] spip pointer to the @p SPIDriver object
+ *
+ * @notapi
+ */
+void spi_lld_start(SPIDriver *spip) {
+ uint32_t ds;
+
+ /* If in stopped state then enables the SPI and DMA clocks.*/
+ if (spip->state == SPI_STOP) {
+#if STM32_SPI_USE_SPI1
+ if (&SPID1 == spip) {
+ bool_t b;
+ b = dmaStreamAllocate(spip->dmarx,
+ STM32_SPI_SPI1_IRQ_PRIORITY,
+ (stm32_dmaisr_t)spi_lld_serve_rx_interrupt,
+ (void *)spip);
+ osalDbgAssert(!b, "spi_lld_start(), #1", "stream already allocated");
+ b = dmaStreamAllocate(spip->dmatx,
+ STM32_SPI_SPI1_IRQ_PRIORITY,
+ (stm32_dmaisr_t)spi_lld_serve_tx_interrupt,
+ (void *)spip);
+ osalDbgAssert(!b, "spi_lld_start(), #2", "stream already allocated");
+ rccEnableSPI1(FALSE);
+ }
+#endif
+#if STM32_SPI_USE_SPI2
+ if (&SPID2 == spip) {
+ bool_t b;
+ b = dmaStreamAllocate(spip->dmarx,
+ STM32_SPI_SPI2_IRQ_PRIORITY,
+ (stm32_dmaisr_t)spi_lld_serve_rx_interrupt,
+ (void *)spip);
+ osalDbgAssert(!b, "spi_lld_start(), #3", "stream already allocated");
+ b = dmaStreamAllocate(spip->dmatx,
+ STM32_SPI_SPI2_IRQ_PRIORITY,
+ (stm32_dmaisr_t)spi_lld_serve_tx_interrupt,
+ (void *)spip);
+ osalDbgAssert(!b, "spi_lld_start(), #4", "stream already allocated");
+ rccEnableSPI2(FALSE);
+ }
+#endif
+#if STM32_SPI_USE_SPI3
+ if (&SPID3 == spip) {
+ bool_t b;
+ b = dmaStreamAllocate(spip->dmarx,
+ STM32_SPI_SPI3_IRQ_PRIORITY,
+ (stm32_dmaisr_t)spi_lld_serve_rx_interrupt,
+ (void *)spip);
+ osalDbgAssert(!b, "spi_lld_start(), #5", "stream already allocated");
+ b = dmaStreamAllocate(spip->dmatx,
+ STM32_SPI_SPI3_IRQ_PRIORITY,
+ (stm32_dmaisr_t)spi_lld_serve_tx_interrupt,
+ (void *)spip);
+ osalDbgAssert(!b, "spi_lld_start(), #6", "stream already allocated");
+ rccEnableSPI3(FALSE);
+ }
+#endif
+
+ /* DMA setup.*/
+ dmaStreamSetPeripheral(spip->dmarx, &spip->spi->DR);
+ dmaStreamSetPeripheral(spip->dmatx, &spip->spi->DR);
+ }
+
+ /* Configuration-specific DMA setup.*/
+ ds = spip->config->cr2 & SPI_CR2_DS;
+ if (!ds || (ds <= (SPI_CR2_DS_2 | SPI_CR2_DS_1 | SPI_CR2_DS_0))) {
+ /* Frame width is 8 bits or smaller.*/
+ spip->rxdmamode = (spip->rxdmamode & ~STM32_DMA_CR_SIZE_MASK) |
+ STM32_DMA_CR_PSIZE_BYTE | STM32_DMA_CR_MSIZE_BYTE;
+ spip->txdmamode = (spip->txdmamode & ~STM32_DMA_CR_SIZE_MASK) |
+ STM32_DMA_CR_PSIZE_BYTE | STM32_DMA_CR_MSIZE_BYTE;
+ }
+ else {
+ /* Frame width is larger than 8 bits.*/
+ spip->rxdmamode = (spip->rxdmamode & ~STM32_DMA_CR_SIZE_MASK) |
+ STM32_DMA_CR_PSIZE_HWORD | STM32_DMA_CR_MSIZE_HWORD;
+ spip->txdmamode = (spip->txdmamode & ~STM32_DMA_CR_SIZE_MASK) |
+ STM32_DMA_CR_PSIZE_HWORD | STM32_DMA_CR_MSIZE_HWORD;
+ }
+ /* SPI setup and enable.*/
+ spip->spi->CR1 = 0;
+ spip->spi->CR1 = spip->config->cr1 | SPI_CR1_MSTR | SPI_CR1_SSM |
+ SPI_CR1_SSI;
+ spip->spi->CR2 = spip->config->cr2 | SPI_CR2_FRXTH | SPI_CR2_SSOE |
+ SPI_CR2_RXDMAEN | SPI_CR2_TXDMAEN;
+ spip->spi->CR1 |= SPI_CR1_SPE;
+}
+
+/**
+ * @brief Deactivates the SPI peripheral.
+ *
+ * @param[in] spip pointer to the @p SPIDriver object
+ *
+ * @notapi
+ */
+void spi_lld_stop(SPIDriver *spip) {
+
+ /* If in ready state then disables the SPI clock.*/
+ if (spip->state == SPI_READY) {
+
+ /* SPI disable.*/
+ spip->spi->CR1 = 0;
+ spip->spi->CR2 = 0;
+ dmaStreamRelease(spip->dmarx);
+ dmaStreamRelease(spip->dmatx);
+
+#if STM32_SPI_USE_SPI1
+ if (&SPID1 == spip)
+ rccDisableSPI1(FALSE);
+#endif
+#if STM32_SPI_USE_SPI2
+ if (&SPID2 == spip)
+ rccDisableSPI2(FALSE);
+#endif
+#if STM32_SPI_USE_SPI3
+ if (&SPID3 == spip)
+ rccDisableSPI3(FALSE);
+#endif
+ }
+}
+
+/**
+ * @brief Asserts the slave select signal and prepares for transfers.
+ *
+ * @param[in] spip pointer to the @p SPIDriver object
+ *
+ * @notapi
+ */
+void spi_lld_select(SPIDriver *spip) {
+
+ palClearPad(spip->config->ssport, spip->config->sspad);
+}
+
+/**
+ * @brief Deasserts the slave select signal.
+ * @details The previously selected peripheral is unselected.
+ *
+ * @param[in] spip pointer to the @p SPIDriver object
+ *
+ * @notapi
+ */
+void spi_lld_unselect(SPIDriver *spip) {
+
+ palSetPad(spip->config->ssport, spip->config->sspad);
+}
+
+/**
+ * @brief Ignores data on the SPI bus.
+ * @details This asynchronous function starts the transmission of a series of
+ * idle words on the SPI bus and ignores the received data.
+ * @post At the end of the operation the configured callback is invoked.
+ *
+ * @param[in] spip pointer to the @p SPIDriver object
+ * @param[in] n number of words to be ignored
+ *
+ * @notapi
+ */
+void spi_lld_ignore(SPIDriver *spip, size_t n) {
+
+ dmaStreamSetMemory0(spip->dmarx, &dummyrx);
+ dmaStreamSetTransactionSize(spip->dmarx, n);
+ dmaStreamSetMode(spip->dmarx, spip->rxdmamode);
+
+ dmaStreamSetMemory0(spip->dmatx, &dummytx);
+ dmaStreamSetTransactionSize(spip->dmatx, n);
+ dmaStreamSetMode(spip->dmatx, spip->txdmamode);
+
+ dmaStreamEnable(spip->dmarx);
+ dmaStreamEnable(spip->dmatx);
+}
+
+/**
+ * @brief Exchanges data on the SPI bus.
+ * @details This asynchronous function starts a simultaneous transmit/receive
+ * operation.
+ * @post At the end of the operation the configured callback is invoked.
+ * @note The buffers are organized as uint8_t arrays for data sizes below or
+ * equal to 8 bits else it is organized as uint16_t arrays.
+ *
+ * @param[in] spip pointer to the @p SPIDriver object
+ * @param[in] n number of words to be exchanged
+ * @param[in] txbuf the pointer to the transmit buffer
+ * @param[out] rxbuf the pointer to the receive buffer
+ *
+ * @notapi
+ */
+void spi_lld_exchange(SPIDriver *spip, size_t n,
+ const void *txbuf, void *rxbuf) {
+
+ dmaStreamSetMemory0(spip->dmarx, rxbuf);
+ dmaStreamSetTransactionSize(spip->dmarx, n);
+ dmaStreamSetMode(spip->dmarx, spip->rxdmamode| STM32_DMA_CR_MINC);
+
+ dmaStreamSetMemory0(spip->dmatx, txbuf);
+ dmaStreamSetTransactionSize(spip->dmatx, n);
+ dmaStreamSetMode(spip->dmatx, spip->txdmamode | STM32_DMA_CR_MINC);
+
+ dmaStreamEnable(spip->dmarx);
+ dmaStreamEnable(spip->dmatx);
+}
+
+/**
+ * @brief Sends data over the SPI bus.
+ * @details This asynchronous function starts a transmit operation.
+ * @post At the end of the operation the configured callback is invoked.
+ * @note The buffers are organized as uint8_t arrays for data sizes below or
+ * equal to 8 bits else it is organized as uint16_t arrays.
+ *
+ * @param[in] spip pointer to the @p SPIDriver object
+ * @param[in] n number of words to send
+ * @param[in] txbuf the pointer to the transmit buffer
+ *
+ * @notapi
+ */
+void spi_lld_send(SPIDriver *spip, size_t n, const void *txbuf) {
+
+ dmaStreamSetMemory0(spip->dmarx, &dummyrx);
+ dmaStreamSetTransactionSize(spip->dmarx, n);
+ dmaStreamSetMode(spip->dmarx, spip->rxdmamode);
+
+ dmaStreamSetMemory0(spip->dmatx, txbuf);
+ dmaStreamSetTransactionSize(spip->dmatx, n);
+ dmaStreamSetMode(spip->dmatx, spip->txdmamode | STM32_DMA_CR_MINC);
+
+ dmaStreamEnable(spip->dmarx);
+ dmaStreamEnable(spip->dmatx);
+}
+
+/**
+ * @brief Receives data from the SPI bus.
+ * @details This asynchronous function starts a receive operation.
+ * @post At the end of the operation the configured callback is invoked.
+ * @note The buffers are organized as uint8_t arrays for data sizes below or
+ * equal to 8 bits else it is organized as uint16_t arrays.
+ *
+ * @param[in] spip pointer to the @p SPIDriver object
+ * @param[in] n number of words to receive
+ * @param[out] rxbuf the pointer to the receive buffer
+ *
+ * @notapi
+ */
+void spi_lld_receive(SPIDriver *spip, size_t n, void *rxbuf) {
+
+ dmaStreamSetMemory0(spip->dmarx, rxbuf);
+ dmaStreamSetTransactionSize(spip->dmarx, n);
+ dmaStreamSetMode(spip->dmarx, spip->rxdmamode | STM32_DMA_CR_MINC);
+
+ dmaStreamSetMemory0(spip->dmatx, &dummytx);
+ dmaStreamSetTransactionSize(spip->dmatx, n);
+ dmaStreamSetMode(spip->dmatx, spip->txdmamode);
+
+ dmaStreamEnable(spip->dmarx);
+ dmaStreamEnable(spip->dmatx);
+}
+
+/**
+ * @brief Exchanges one frame using a polled wait.
+ * @details This synchronous function exchanges one frame using a polled
+ * synchronization method. This function is useful when exchanging
+ * small amount of data on high speed channels, usually in this
+ * situation is much more efficient just wait for completion using
+ * polling than suspending the thread waiting for an interrupt.
+ *
+ * @param[in] spip pointer to the @p SPIDriver object
+ * @param[in] frame the data frame to send over the SPI bus
+ * @return The received data frame from the SPI bus.
+ */
+uint16_t spi_lld_polled_exchange(SPIDriver *spip, uint16_t frame) {
+
+ /*
+ * Data register must be accessed with the appropriate data size.
+ * Byte size access (uint8_t *) for transactions that are <= 8-bit.
+ * Halfword size access (uint16_t) for transactions that are <= 8-bit.
+ */
+ if ((spip->config->cr2 & SPI_CR2_DS) <= (SPI_CR2_DS_2 |
+ SPI_CR2_DS_1 |
+ SPI_CR2_DS_0)) {
+ volatile uint8_t *spidr = (volatile uint8_t *)&spip->spi->DR;
+ *spidr = (uint8_t)frame;
+ while ((spip->spi->SR & SPI_SR_RXNE) == 0)
+ ;
+ return (uint16_t)*spidr;
+ }
+ else {
+ spip->spi->DR = frame;
+ while ((spip->spi->SR & SPI_SR_RXNE) == 0)
+ ;
+ return spip->spi->DR;
+ }
+}
+
+#endif /* HAL_USE_SPI */
+
+/** @} */
diff --git a/os/hal/platforms/STM32/SPIv2/spi_lld.h b/os/hal/platforms/STM32/SPIv2/spi_lld.h new file mode 100644 index 000000000..fc2b39fa5 --- /dev/null +++ b/os/hal/platforms/STM32/SPIv2/spi_lld.h @@ -0,0 +1,420 @@ +/*
+ ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+/**
+ * @file STM32/SPIv2/spi_lld.h
+ * @brief STM32 SPI subsystem low level driver header.
+ *
+ * @addtogroup SPI
+ * @{
+ */
+
+#ifndef _SPI_LLD_H_
+#define _SPI_LLD_H_
+
+#if HAL_USE_SPI || defined(__DOXYGEN__)
+
+/*===========================================================================*/
+/* Driver constants. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver pre-compile time settings. */
+/*===========================================================================*/
+
+/**
+ * @name Configuration options
+ * @{
+ */
+/**
+ * @brief SPI1 driver enable switch.
+ * @details If set to @p TRUE the support for SPI1 is included.
+ * @note The default is @p TRUE.
+ */
+#if !defined(STM32_SPI_USE_SPI1) || defined(__DOXYGEN__)
+#define STM32_SPI_USE_SPI1 FALSE
+#endif
+
+/**
+ * @brief SPI2 driver enable switch.
+ * @details If set to @p TRUE the support for SPI2 is included.
+ * @note The default is @p TRUE.
+ */
+#if !defined(STM32_SPI_USE_SPI2) || defined(__DOXYGEN__)
+#define STM32_SPI_USE_SPI2 FALSE
+#endif
+
+/**
+ * @brief SPI3 driver enable switch.
+ * @details If set to @p TRUE the support for SPI3 is included.
+ * @note The default is @p TRUE.
+ */
+#if !defined(STM32_SPI_USE_SPI3) || defined(__DOXYGEN__)
+#define STM32_SPI_USE_SPI3 FALSE
+#endif
+
+/**
+ * @brief SPI1 interrupt priority level setting.
+ */
+#if !defined(STM32_SPI_SPI1_IRQ_PRIORITY) || defined(__DOXYGEN__)
+#define STM32_SPI_SPI1_IRQ_PRIORITY 10
+#endif
+
+/**
+ * @brief SPI2 interrupt priority level setting.
+ */
+#if !defined(STM32_SPI_SPI2_IRQ_PRIORITY) || defined(__DOXYGEN__)
+#define STM32_SPI_SPI2_IRQ_PRIORITY 10
+#endif
+
+/**
+ * @brief SPI3 interrupt priority level setting.
+ */
+#if !defined(STM32_SPI_SPI3_IRQ_PRIORITY) || defined(__DOXYGEN__)
+#define STM32_SPI_SPI3_IRQ_PRIORITY 10
+#endif
+
+/**
+ * @brief SPI1 DMA priority (0..3|lowest..highest).
+ * @note The priority level is used for both the TX and RX DMA streams but
+ * because of the streams ordering the RX stream has always priority
+ * over the TX stream.
+ */
+#if !defined(STM32_SPI_SPI1_DMA_PRIORITY) || defined(__DOXYGEN__)
+#define STM32_SPI_SPI1_DMA_PRIORITY 1
+#endif
+
+/**
+ * @brief SPI2 DMA priority (0..3|lowest..highest).
+ * @note The priority level is used for both the TX and RX DMA streams but
+ * because of the streams ordering the RX stream has always priority
+ * over the TX stream.
+ */
+#if !defined(STM32_SPI_SPI2_DMA_PRIORITY) || defined(__DOXYGEN__)
+#define STM32_SPI_SPI2_DMA_PRIORITY 1
+#endif
+
+/**
+ * @brief SPI3 DMA priority (0..3|lowest..highest).
+ * @note The priority level is used for both the TX and RX DMA streams but
+ * because of the streams ordering the RX stream has always priority
+ * over the TX stream.
+ */
+#if !defined(STM32_SPI_SPI3_DMA_PRIORITY) || defined(__DOXYGEN__)
+#define STM32_SPI_SPI3_DMA_PRIORITY 1
+#endif
+
+/**
+ * @brief SPI DMA error hook.
+ */
+#if !defined(STM32_SPI_DMA_ERROR_HOOK) || defined(__DOXYGEN__)
+#define STM32_SPI_DMA_ERROR_HOOK(spip) chSysHalt()
+#endif
+
+#if STM32_ADVANCED_DMA || defined(__DOXYGEN__)
+
+/**
+ * @brief DMA stream used for SPI1 RX operations.
+ * @note This option is only available on platforms with enhanced DMA.
+ */
+#if !defined(STM32_SPI_SPI1_RX_DMA_STREAM) || defined(__DOXYGEN__)
+#define STM32_SPI_SPI1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 0)
+#endif
+
+/**
+ * @brief DMA stream used for SPI1 TX operations.
+ * @note This option is only available on platforms with enhanced DMA.
+ */
+#if !defined(STM32_SPI_SPI1_TX_DMA_STREAM) || defined(__DOXYGEN__)
+#define STM32_SPI_SPI1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 3)
+#endif
+
+/**
+ * @brief DMA stream used for SPI2 RX operations.
+ * @note This option is only available on platforms with enhanced DMA.
+ */
+#if !defined(STM32_SPI_SPI2_RX_DMA_STREAM) || defined(__DOXYGEN__)
+#define STM32_SPI_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3)
+#endif
+
+/**
+ * @brief DMA stream used for SPI2 TX operations.
+ * @note This option is only available on platforms with enhanced DMA.
+ */
+#if !defined(STM32_SPI_SPI2_TX_DMA_STREAM) || defined(__DOXYGEN__)
+#define STM32_SPI_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4)
+#endif
+
+/**
+ * @brief DMA stream used for SPI3 RX operations.
+ * @note This option is only available on platforms with enhanced DMA.
+ */
+#if !defined(STM32_SPI_SPI3_RX_DMA_STREAM) || defined(__DOXYGEN__)
+#define STM32_SPI_SPI3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0)
+#endif
+
+/**
+ * @brief DMA stream used for SPI3 TX operations.
+ * @note This option is only available on platforms with enhanced DMA.
+ */
+#if !defined(STM32_SPI_SPI3_TX_DMA_STREAM) || defined(__DOXYGEN__)
+#define STM32_SPI_SPI3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7)
+#endif
+
+#else /* !STM32_ADVANCED_DMA */
+
+#if defined(STM32F0XX)
+/* Fixed values for STM32F0xx devices.*/
+#define STM32_SPI_SPI1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2)
+#define STM32_SPI_SPI1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3)
+#define STM32_SPI_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4)
+#define STM32_SPI_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5)
+#endif /* defined(STM32F0XX) */
+
+#if defined(STM32F30X) || defined(STM32F37X)
+/* Fixed values for STM32F3xx devices.*/
+#define STM32_SPI_SPI1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2)
+#define STM32_SPI_SPI1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3)
+#define STM32_SPI_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4)
+#define STM32_SPI_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5)
+#define STM32_SPI_SPI3_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 1)
+#define STM32_SPI_SPI3_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 2)
+#endif /* defined(STM32F30X) */
+
+#endif /* !STM32_ADVANCED_DMA*/
+/** @} */
+
+/*===========================================================================*/
+/* Derived constants and error checks. */
+/*===========================================================================*/
+
+#if STM32_SPI_USE_SPI1 && !STM32_HAS_SPI1
+#error "SPI1 not present in the selected device"
+#endif
+
+#if STM32_SPI_USE_SPI2 && !STM32_HAS_SPI2
+#error "SPI2 not present in the selected device"
+#endif
+
+#if STM32_SPI_USE_SPI3 && !STM32_HAS_SPI3
+#error "SPI3 not present in the selected device"
+#endif
+
+#if !STM32_SPI_USE_SPI1 && !STM32_SPI_USE_SPI2 && !STM32_SPI_USE_SPI3
+#error "SPI driver activated but no SPI peripheral assigned"
+#endif
+
+#if STM32_SPI_USE_SPI1 && \
+ !CORTEX_IS_VALID_KERNEL_PRIORITY(STM32_SPI_SPI1_IRQ_PRIORITY)
+#error "Invalid IRQ priority assigned to SPI1"
+#endif
+
+#if STM32_SPI_USE_SPI2 && \
+ !CORTEX_IS_VALID_KERNEL_PRIORITY(STM32_SPI_SPI2_IRQ_PRIORITY)
+#error "Invalid IRQ priority assigned to SPI2"
+#endif
+
+#if STM32_SPI_USE_SPI3 && \
+ !CORTEX_IS_VALID_KERNEL_PRIORITY(STM32_SPI_SPI3_IRQ_PRIORITY)
+#error "Invalid IRQ priority assigned to SPI3"
+#endif
+
+#if STM32_SPI_USE_SPI1 && \
+ !STM32_DMA_IS_VALID_PRIORITY(STM32_SPI_SPI1_DMA_PRIORITY)
+#error "Invalid DMA priority assigned to SPI1"
+#endif
+
+#if STM32_SPI_USE_SPI2 && \
+ !STM32_DMA_IS_VALID_PRIORITY(STM32_SPI_SPI2_DMA_PRIORITY)
+#error "Invalid DMA priority assigned to SPI2"
+#endif
+
+#if STM32_SPI_USE_SPI3 && \
+ !STM32_DMA_IS_VALID_PRIORITY(STM32_SPI_SPI3_DMA_PRIORITY)
+#error "Invalid DMA priority assigned to SPI3"
+#endif
+
+#if STM32_SPI_USE_SPI1 && \
+ !STM32_DMA_IS_VALID_ID(STM32_SPI_SPI1_RX_DMA_STREAM, STM32_SPI1_RX_DMA_MSK)
+#error "invalid DMA stream associated to SPI1 RX"
+#endif
+
+#if STM32_SPI_USE_SPI1 && \
+ !STM32_DMA_IS_VALID_ID(STM32_SPI_SPI1_TX_DMA_STREAM, STM32_SPI1_TX_DMA_MSK)
+#error "invalid DMA stream associated to SPI1 TX"
+#endif
+
+#if STM32_SPI_USE_SPI2 && \
+ !STM32_DMA_IS_VALID_ID(STM32_SPI_SPI2_RX_DMA_STREAM, STM32_SPI2_RX_DMA_MSK)
+#error "invalid DMA stream associated to SPI2 RX"
+#endif
+
+#if STM32_SPI_USE_SPI2 && \
+ !STM32_DMA_IS_VALID_ID(STM32_SPI_SPI2_TX_DMA_STREAM, STM32_SPI2_TX_DMA_MSK)
+#error "invalid DMA stream associated to SPI2 TX"
+#endif
+
+#if STM32_SPI_USE_SPI3 && \
+ !STM32_DMA_IS_VALID_ID(STM32_SPI_SPI3_RX_DMA_STREAM, STM32_SPI3_RX_DMA_MSK)
+#error "invalid DMA stream associated to SPI3 RX"
+#endif
+
+#if STM32_SPI_USE_SPI3 && \
+ !STM32_DMA_IS_VALID_ID(STM32_SPI_SPI3_TX_DMA_STREAM, STM32_SPI3_TX_DMA_MSK)
+#error "invalid DMA stream associated to SPI3 TX"
+#endif
+
+#if !defined(STM32_DMA_REQUIRED)
+#define STM32_DMA_REQUIRED
+#endif
+
+/*===========================================================================*/
+/* Driver data structures and types. */
+/*===========================================================================*/
+
+/**
+ * @brief Type of a structure representing an SPI driver.
+ */
+typedef struct SPIDriver SPIDriver;
+
+/**
+ * @brief SPI notification callback type.
+ *
+ * @param[in] spip pointer to the @p SPIDriver object triggering the
+ * callback
+ */
+typedef void (*spicallback_t)(SPIDriver *spip);
+
+/**
+ * @brief Driver configuration structure.
+ */
+typedef struct {
+ /**
+ * @brief Operation complete callback or @p NULL.
+ */
+ spicallback_t end_cb;
+ /* End of the mandatory fields.*/
+ /**
+ * @brief The chip select line port.
+ */
+ ioportid_t ssport;
+ /**
+ * @brief The chip select line pad number.
+ */
+ uint16_t sspad;
+ /**
+ * @brief SPI CR1 register initialization data.
+ */
+ uint16_t cr1;
+ /**
+ * @brief SPI CR2 register initialization data.
+ */
+ uint16_t cr2;
+} SPIConfig;
+
+/**
+ * @brief Structure representing a SPI driver.
+ */
+struct SPIDriver{
+ /**
+ * @brief Driver state.
+ */
+ spistate_t state;
+ /**
+ * @brief Current configuration data.
+ */
+ const SPIConfig *config;
+#if SPI_USE_WAIT || defined(__DOXYGEN__)
+ /**
+ * @brief Waiting thread.
+ */
+ thread_reference_t thread;
+#endif /* SPI_USE_WAIT */
+#if SPI_USE_MUTUAL_EXCLUSION || defined(__DOXYGEN__)
+ /**
+ * @brief Mutex protecting the peripheral.
+ */
+ mutex_t mutex;
+#endif /* SPI_USE_MUTUAL_EXCLUSION */
+#if defined(SPI_DRIVER_EXT_FIELDS)
+ SPI_DRIVER_EXT_FIELDS
+#endif
+ /* End of the mandatory fields.*/
+ /**
+ * @brief Pointer to the SPIx registers block.
+ */
+ SPI_TypeDef *spi;
+ /**
+ * @brief Receive DMA stream.
+ */
+ const stm32_dma_stream_t *dmarx;
+ /**
+ * @brief Transmit DMA stream.
+ */
+ const stm32_dma_stream_t *dmatx;
+ /**
+ * @brief RX DMA mode bit mask.
+ */
+ uint32_t rxdmamode;
+ /**
+ * @brief TX DMA mode bit mask.
+ */
+ uint32_t txdmamode;
+};
+
+/*===========================================================================*/
+/* Driver macros. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* External declarations. */
+/*===========================================================================*/
+
+#if STM32_SPI_USE_SPI1 && !defined(__DOXYGEN__)
+extern SPIDriver SPID1;
+#endif
+
+#if STM32_SPI_USE_SPI2 && !defined(__DOXYGEN__)
+extern SPIDriver SPID2;
+#endif
+
+#if STM32_SPI_USE_SPI3 && !defined(__DOXYGEN__)
+extern SPIDriver SPID3;
+#endif
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+ void spi_lld_init(void);
+ void spi_lld_start(SPIDriver *spip);
+ void spi_lld_stop(SPIDriver *spip);
+ void spi_lld_select(SPIDriver *spip);
+ void spi_lld_unselect(SPIDriver *spip);
+ void spi_lld_ignore(SPIDriver *spip, size_t n);
+ void spi_lld_exchange(SPIDriver *spip, size_t n,
+ const void *txbuf, void *rxbuf);
+ void spi_lld_send(SPIDriver *spip, size_t n, const void *txbuf);
+ void spi_lld_receive(SPIDriver *spip, size_t n, void *rxbuf);
+ uint16_t spi_lld_polled_exchange(SPIDriver *spip, uint16_t frame);
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* HAL_USE_SPI */
+
+#endif /* _SPI_LLD_H_ */
+
+/** @} */
diff --git a/os/hal/platforms/STM32/USARTv1/serial_lld.c b/os/hal/platforms/STM32/USARTv1/serial_lld.c new file mode 100644 index 000000000..a8333bf77 --- /dev/null +++ b/os/hal/platforms/STM32/USARTv1/serial_lld.c @@ -0,0 +1,531 @@ +/*
+ ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+/**
+ * @file STM32/USARTv1/serial_lld.c
+ * @brief STM32 low level serial driver code.
+ *
+ * @addtogroup SERIAL
+ * @{
+ */
+
+#include "ch.h"
+#include "hal.h"
+
+#if HAL_USE_SERIAL || defined(__DOXYGEN__)
+
+/*===========================================================================*/
+/* Driver local definitions. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver exported variables. */
+/*===========================================================================*/
+
+/** @brief USART1 serial driver identifier.*/
+#if STM32_SERIAL_USE_USART1 || defined(__DOXYGEN__)
+SerialDriver SD1;
+#endif
+
+/** @brief USART2 serial driver identifier.*/
+#if STM32_SERIAL_USE_USART2 || defined(__DOXYGEN__)
+SerialDriver SD2;
+#endif
+
+/** @brief USART3 serial driver identifier.*/
+#if STM32_SERIAL_USE_USART3 || defined(__DOXYGEN__)
+SerialDriver SD3;
+#endif
+
+/** @brief UART4 serial driver identifier.*/
+#if STM32_SERIAL_USE_UART4 || defined(__DOXYGEN__)
+SerialDriver SD4;
+#endif
+
+/** @brief UART5 serial driver identifier.*/
+#if STM32_SERIAL_USE_UART5 || defined(__DOXYGEN__)
+SerialDriver SD5;
+#endif
+
+/** @brief USART6 serial driver identifier.*/
+#if STM32_SERIAL_USE_USART6 || defined(__DOXYGEN__)
+SerialDriver SD6;
+#endif
+
+/*===========================================================================*/
+/* Driver local variables and types. */
+/*===========================================================================*/
+
+/** @brief Driver default configuration.*/
+static const SerialConfig default_config =
+{
+ SERIAL_DEFAULT_BITRATE,
+ 0,
+ USART_CR2_STOP1_BITS | USART_CR2_LINEN,
+ 0
+};
+
+/*===========================================================================*/
+/* Driver local functions. */
+/*===========================================================================*/
+
+/**
+ * @brief USART initialization.
+ * @details This function must be invoked with interrupts disabled.
+ *
+ * @param[in] sdp pointer to a @p SerialDriver object
+ * @param[in] config the architecture-dependent serial driver configuration
+ */
+static void usart_init(SerialDriver *sdp, const SerialConfig *config) {
+ USART_TypeDef *u = sdp->usart;
+
+ /* Baud rate setting.*/
+#if STM32_HAS_USART6
+ if ((sdp->usart == USART1) || (sdp->usart == USART6))
+#else
+ if (sdp->usart == USART1)
+#endif
+ u->BRR = STM32_PCLK2 / config->speed;
+ else
+ u->BRR = STM32_PCLK1 / config->speed;
+
+ /* Note that some bits are enforced.*/
+ u->CR2 = config->cr2 | USART_CR2_LBDIE;
+ u->CR3 = config->cr3 | USART_CR3_EIE;
+ u->CR1 = config->cr1 | USART_CR1_UE | USART_CR1_PEIE |
+ USART_CR1_RXNEIE | USART_CR1_TE |
+ USART_CR1_RE;
+ u->SR = 0;
+ (void)u->SR; /* SR reset step 1.*/
+ (void)u->DR; /* SR reset step 2.*/
+}
+
+/**
+ * @brief USART de-initialization.
+ * @details This function must be invoked with interrupts disabled.
+ *
+ * @param[in] u pointer to an USART I/O block
+ */
+static void usart_deinit(USART_TypeDef *u) {
+
+ u->CR1 = 0;
+ u->CR2 = 0;
+ u->CR3 = 0;
+}
+
+/**
+ * @brief Error handling routine.
+ *
+ * @param[in] sdp pointer to a @p SerialDriver object
+ * @param[in] sr USART SR register value
+ */
+static void set_error(SerialDriver *sdp, uint16_t sr) {
+ flagsmask_t sts = 0;
+
+ if (sr & USART_SR_ORE)
+ sts |= SD_OVERRUN_ERROR;
+ if (sr & USART_SR_PE)
+ sts |= SD_PARITY_ERROR;
+ if (sr & USART_SR_FE)
+ sts |= SD_FRAMING_ERROR;
+ if (sr & USART_SR_NE)
+ sts |= SD_NOISE_ERROR;
+ chSysLockFromIsr();
+ chnAddFlagsI(sdp, sts);
+ chSysUnlockFromIsr();
+}
+
+/**
+ * @brief Common IRQ handler.
+ *
+ * @param[in] sdp communication channel associated to the USART
+ */
+static void serve_interrupt(SerialDriver *sdp) {
+ USART_TypeDef *u = sdp->usart;
+ uint16_t cr1 = u->CR1;
+ uint16_t sr = u->SR; /* SR reset step 1.*/
+ uint16_t dr = u->DR; /* SR reset step 2.*/
+
+ /* Error condition detection.*/
+ if (sr & (USART_SR_ORE | USART_SR_NE | USART_SR_FE | USART_SR_PE))
+ set_error(sdp, sr);
+ /* Special case, LIN break detection.*/
+ if (sr & USART_SR_LBD) {
+ chSysLockFromIsr();
+ chnAddFlagsI(sdp, SD_BREAK_DETECTED);
+ chSysUnlockFromIsr();
+ u->SR &= ~USART_SR_LBD;
+ }
+ /* Data available.*/
+ if (sr & USART_SR_RXNE) {
+ chSysLockFromIsr();
+ sdIncomingDataI(sdp, (uint8_t)dr);
+ chSysUnlockFromIsr();
+ }
+ /* Transmission buffer empty.*/
+ if ((cr1 & USART_CR1_TXEIE) && (sr & USART_SR_TXE)) {
+ msg_t b;
+ chSysLockFromIsr();
+ b = chOQGetI(&sdp->oqueue);
+ if (b < Q_OK) {
+ chnAddFlagsI(sdp, CHN_OUTPUT_EMPTY);
+ u->CR1 = (cr1 & ~USART_CR1_TXEIE) | USART_CR1_TCIE;
+ }
+ else
+ u->DR = b;
+ chSysUnlockFromIsr();
+ }
+ /* Physical transmission end.*/
+ if (sr & USART_SR_TC) {
+ chSysLockFromIsr();
+ chnAddFlagsI(sdp, CHN_TRANSMISSION_END);
+ chSysUnlockFromIsr();
+ u->CR1 = cr1 & ~USART_CR1_TCIE;
+ u->SR &= ~USART_SR_TC;
+ }
+}
+
+#if STM32_SERIAL_USE_USART1 || defined(__DOXYGEN__)
+static void notify1(GenericQueue *qp) {
+
+ (void)qp;
+ USART1->CR1 |= USART_CR1_TXEIE;
+}
+#endif
+
+#if STM32_SERIAL_USE_USART2 || defined(__DOXYGEN__)
+static void notify2(GenericQueue *qp) {
+
+ (void)qp;
+ USART2->CR1 |= USART_CR1_TXEIE;
+}
+#endif
+
+#if STM32_SERIAL_USE_USART3 || defined(__DOXYGEN__)
+static void notify3(GenericQueue *qp) {
+
+ (void)qp;
+ USART3->CR1 |= USART_CR1_TXEIE;
+}
+#endif
+
+#if STM32_SERIAL_USE_UART4 || defined(__DOXYGEN__)
+static void notify4(GenericQueue *qp) {
+
+ (void)qp;
+ UART4->CR1 |= USART_CR1_TXEIE;
+}
+#endif
+
+#if STM32_SERIAL_USE_UART5 || defined(__DOXYGEN__)
+static void notify5(GenericQueue *qp) {
+
+ (void)qp;
+ UART5->CR1 |= USART_CR1_TXEIE;
+}
+#endif
+
+#if STM32_SERIAL_USE_USART6 || defined(__DOXYGEN__)
+static void notify6(GenericQueue *qp) {
+
+ (void)qp;
+ USART6->CR1 |= USART_CR1_TXEIE;
+}
+#endif
+
+/*===========================================================================*/
+/* Driver interrupt handlers. */
+/*===========================================================================*/
+
+#if STM32_SERIAL_USE_USART1 || defined(__DOXYGEN__)
+#if !defined(STM32_USART1_HANDLER)
+#error "STM32_USART1_HANDLER not defined"
+#endif
+/**
+ * @brief USART1 interrupt handler.
+ *
+ * @isr
+ */
+CH_IRQ_HANDLER(STM32_USART1_HANDLER) {
+
+ CH_IRQ_PROLOGUE();
+
+ serve_interrupt(&SD1);
+
+ CH_IRQ_EPILOGUE();
+}
+#endif
+
+#if STM32_SERIAL_USE_USART2 || defined(__DOXYGEN__)
+#if !defined(STM32_USART2_HANDLER)
+#error "STM32_USART2_HANDLER not defined"
+#endif
+/**
+ * @brief USART2 interrupt handler.
+ *
+ * @isr
+ */
+CH_IRQ_HANDLER(STM32_USART2_HANDLER) {
+
+ CH_IRQ_PROLOGUE();
+
+ serve_interrupt(&SD2);
+
+ CH_IRQ_EPILOGUE();
+}
+#endif
+
+#if STM32_SERIAL_USE_USART3 || defined(__DOXYGEN__)
+#if !defined(STM32_USART3_HANDLER)
+#error "STM32_USART3_HANDLER not defined"
+#endif
+/**
+ * @brief USART3 interrupt handler.
+ *
+ * @isr
+ */
+CH_IRQ_HANDLER(STM32_USART3_HANDLER) {
+
+ CH_IRQ_PROLOGUE();
+
+ serve_interrupt(&SD3);
+
+ CH_IRQ_EPILOGUE();
+}
+#endif
+
+#if STM32_SERIAL_USE_UART4 || defined(__DOXYGEN__)
+#if !defined(STM32_UART4_HANDLER)
+#error "STM32_UART4_HANDLER not defined"
+#endif
+/**
+ * @brief UART4 interrupt handler.
+ *
+ * @isr
+ */
+CH_IRQ_HANDLER(STM32_UART4_HANDLER) {
+
+ CH_IRQ_PROLOGUE();
+
+ serve_interrupt(&SD4);
+
+ CH_IRQ_EPILOGUE();
+}
+#endif
+
+#if STM32_SERIAL_USE_UART5 || defined(__DOXYGEN__)
+#if !defined(STM32_UART5_HANDLER)
+#error "STM32_UART5_HANDLER not defined"
+#endif
+/**
+ * @brief UART5 interrupt handler.
+ *
+ * @isr
+ */
+CH_IRQ_HANDLER(STM32_UART5_HANDLER) {
+
+ CH_IRQ_PROLOGUE();
+
+ serve_interrupt(&SD5);
+
+ CH_IRQ_EPILOGUE();
+}
+#endif
+
+#if STM32_SERIAL_USE_USART6 || defined(__DOXYGEN__)
+#if !defined(STM32_USART6_HANDLER)
+#error "STM32_USART6_HANDLER not defined"
+#endif
+/**
+ * @brief USART1 interrupt handler.
+ *
+ * @isr
+ */
+CH_IRQ_HANDLER(STM32_USART6_HANDLER) {
+
+ CH_IRQ_PROLOGUE();
+
+ serve_interrupt(&SD6);
+
+ CH_IRQ_EPILOGUE();
+}
+#endif
+
+/*===========================================================================*/
+/* Driver exported functions. */
+/*===========================================================================*/
+
+/**
+ * @brief Low level serial driver initialization.
+ *
+ * @notapi
+ */
+void sd_lld_init(void) {
+
+#if STM32_SERIAL_USE_USART1
+ sdObjectInit(&SD1, NULL, notify1);
+ SD1.usart = USART1;
+#endif
+
+#if STM32_SERIAL_USE_USART2
+ sdObjectInit(&SD2, NULL, notify2);
+ SD2.usart = USART2;
+#endif
+
+#if STM32_SERIAL_USE_USART3
+ sdObjectInit(&SD3, NULL, notify3);
+ SD3.usart = USART3;
+#endif
+
+#if STM32_SERIAL_USE_UART4
+ sdObjectInit(&SD4, NULL, notify4);
+ SD4.usart = UART4;
+#endif
+
+#if STM32_SERIAL_USE_UART5
+ sdObjectInit(&SD5, NULL, notify5);
+ SD5.usart = UART5;
+#endif
+
+#if STM32_SERIAL_USE_USART6
+ sdObjectInit(&SD6, NULL, notify6);
+ SD6.usart = USART6;
+#endif
+}
+
+/**
+ * @brief Low level serial driver configuration and (re)start.
+ *
+ * @param[in] sdp pointer to a @p SerialDriver object
+ * @param[in] config the architecture-dependent serial driver configuration.
+ * If this parameter is set to @p NULL then a default
+ * configuration is used.
+ *
+ * @notapi
+ */
+void sd_lld_start(SerialDriver *sdp, const SerialConfig *config) {
+
+ if (config == NULL)
+ config = &default_config;
+
+ if (sdp->state == SD_STOP) {
+#if STM32_SERIAL_USE_USART1
+ if (&SD1 == sdp) {
+ rccEnableUSART1(FALSE);
+ nvicEnableVector(STM32_USART1_NUMBER,
+ CORTEX_PRIORITY_MASK(STM32_SERIAL_USART1_PRIORITY));
+ }
+#endif
+#if STM32_SERIAL_USE_USART2
+ if (&SD2 == sdp) {
+ rccEnableUSART2(FALSE);
+ nvicEnableVector(STM32_USART2_NUMBER,
+ CORTEX_PRIORITY_MASK(STM32_SERIAL_USART2_PRIORITY));
+ }
+#endif
+#if STM32_SERIAL_USE_USART3
+ if (&SD3 == sdp) {
+ rccEnableUSART3(FALSE);
+ nvicEnableVector(STM32_USART3_NUMBER,
+ CORTEX_PRIORITY_MASK(STM32_SERIAL_USART3_PRIORITY));
+ }
+#endif
+#if STM32_SERIAL_USE_UART4
+ if (&SD4 == sdp) {
+ rccEnableUART4(FALSE);
+ nvicEnableVector(STM32_UART4_NUMBER,
+ CORTEX_PRIORITY_MASK(STM32_SERIAL_UART4_PRIORITY));
+ }
+#endif
+#if STM32_SERIAL_USE_UART5
+ if (&SD5 == sdp) {
+ rccEnableUART5(FALSE);
+ nvicEnableVector(STM32_UART5_NUMBER,
+ CORTEX_PRIORITY_MASK(STM32_SERIAL_UART5_PRIORITY));
+ }
+#endif
+#if STM32_SERIAL_USE_USART6
+ if (&SD6 == sdp) {
+ rccEnableUSART6(FALSE);
+ nvicEnableVector(STM32_USART6_NUMBER,
+ CORTEX_PRIORITY_MASK(STM32_SERIAL_USART6_PRIORITY));
+ }
+#endif
+ }
+ usart_init(sdp, config);
+}
+
+/**
+ * @brief Low level serial driver stop.
+ * @details De-initializes the USART, stops the associated clock, resets the
+ * interrupt vector.
+ *
+ * @param[in] sdp pointer to a @p SerialDriver object
+ *
+ * @notapi
+ */
+void sd_lld_stop(SerialDriver *sdp) {
+
+ if (sdp->state == SD_READY) {
+ usart_deinit(sdp->usart);
+#if STM32_SERIAL_USE_USART1
+ if (&SD1 == sdp) {
+ rccDisableUSART1(FALSE);
+ nvicDisableVector(STM32_USART1_NUMBER);
+ return;
+ }
+#endif
+#if STM32_SERIAL_USE_USART2
+ if (&SD2 == sdp) {
+ rccDisableUSART2(FALSE);
+ nvicDisableVector(STM32_USART2_NUMBER);
+ return;
+ }
+#endif
+#if STM32_SERIAL_USE_USART3
+ if (&SD3 == sdp) {
+ rccDisableUSART3(FALSE);
+ nvicDisableVector(STM32_USART3_NUMBER);
+ return;
+ }
+#endif
+#if STM32_SERIAL_USE_UART4
+ if (&SD4 == sdp) {
+ rccDisableUART4(FALSE);
+ nvicDisableVector(STM32_UART4_NUMBER);
+ return;
+ }
+#endif
+#if STM32_SERIAL_USE_UART5
+ if (&SD5 == sdp) {
+ rccDisableUART5(FALSE);
+ nvicDisableVector(STM32_UART5_NUMBER);
+ return;
+ }
+#endif
+#if STM32_SERIAL_USE_USART6
+ if (&SD6 == sdp) {
+ rccDisableUSART6(FALSE);
+ nvicDisableVector(STM32_USART6_NUMBER);
+ return;
+ }
+#endif
+ }
+}
+
+#endif /* HAL_USE_SERIAL */
+
+/** @} */
diff --git a/os/hal/platforms/STM32/USARTv1/serial_lld.h b/os/hal/platforms/STM32/USARTv1/serial_lld.h new file mode 100644 index 000000000..7242537d7 --- /dev/null +++ b/os/hal/platforms/STM32/USARTv1/serial_lld.h @@ -0,0 +1,303 @@ +/*
+ ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+/**
+ * @file STM32/USARTv1/serial_lld.h
+ * @brief STM32 low level serial driver header.
+ *
+ * @addtogroup SERIAL
+ * @{
+ */
+
+#ifndef _SERIAL_LLD_H_
+#define _SERIAL_LLD_H_
+
+#if HAL_USE_SERIAL || defined(__DOXYGEN__)
+
+/*===========================================================================*/
+/* Driver constants. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver pre-compile time settings. */
+/*===========================================================================*/
+
+/**
+ * @name Configuration options
+ * @{
+ */
+/**
+ * @brief USART1 driver enable switch.
+ * @details If set to @p TRUE the support for USART1 is included.
+ * @note The default is @p TRUE.
+ */
+#if !defined(STM32_SERIAL_USE_USART1) || defined(__DOXYGEN__)
+#define STM32_SERIAL_USE_USART1 FALSE
+#endif
+
+/**
+ * @brief USART2 driver enable switch.
+ * @details If set to @p TRUE the support for USART2 is included.
+ * @note The default is @p TRUE.
+ */
+#if !defined(STM32_SERIAL_USE_USART2) || defined(__DOXYGEN__)
+#define STM32_SERIAL_USE_USART2 FALSE
+#endif
+
+/**
+ * @brief USART3 driver enable switch.
+ * @details If set to @p TRUE the support for USART3 is included.
+ * @note The default is @p TRUE.
+ */
+#if !defined(STM32_SERIAL_USE_USART3) || defined(__DOXYGEN__)
+#define STM32_SERIAL_USE_USART3 FALSE
+#endif
+
+/**
+ * @brief UART4 driver enable switch.
+ * @details If set to @p TRUE the support for UART4 is included.
+ * @note The default is @p TRUE.
+ */
+#if !defined(STM32_SERIAL_USE_UART4) || defined(__DOXYGEN__)
+#define STM32_SERIAL_USE_UART4 FALSE
+#endif
+
+/**
+ * @brief UART5 driver enable switch.
+ * @details If set to @p TRUE the support for UART5 is included.
+ * @note The default is @p TRUE.
+ */
+#if !defined(STM32_SERIAL_USE_UART5) || defined(__DOXYGEN__)
+#define STM32_SERIAL_USE_UART5 FALSE
+#endif
+
+/**
+ * @brief USART6 driver enable switch.
+ * @details If set to @p TRUE the support for USART6 is included.
+ * @note The default is @p TRUE.
+ */
+#if !defined(STM32_SERIAL_USE_USART6) || defined(__DOXYGEN__)
+#define STM32_SERIAL_USE_USART6 FALSE
+#endif
+
+/**
+ * @brief USART1 interrupt priority level setting.
+ */
+#if !defined(STM32_SERIAL_USART1_PRIORITY) || defined(__DOXYGEN__)
+#define STM32_SERIAL_USART1_PRIORITY 12
+#endif
+
+/**
+ * @brief USART2 interrupt priority level setting.
+ */
+#if !defined(STM32_SERIAL_USART2_PRIORITY) || defined(__DOXYGEN__)
+#define STM32_SERIAL_USART2_PRIORITY 12
+#endif
+
+/**
+ * @brief USART3 interrupt priority level setting.
+ */
+#if !defined(STM32_SERIAL_USART3_PRIORITY) || defined(__DOXYGEN__)
+#define STM32_SERIAL_USART3_PRIORITY 12
+#endif
+
+/**
+ * @brief UART4 interrupt priority level setting.
+ */
+#if !defined(STM32_SERIAL_UART4_PRIORITY) || defined(__DOXYGEN__)
+#define STM32_SERIAL_UART4_PRIORITY 12
+#endif
+
+/**
+ * @brief UART5 interrupt priority level setting.
+ */
+#if !defined(STM32_SERIAL_UART5_PRIORITY) || defined(__DOXYGEN__)
+#define STM32_SERIAL_UART5_PRIORITY 12
+#endif
+
+/**
+ * @brief USART6 interrupt priority level setting.
+ */
+#if !defined(STM32_SERIAL_USART6_PRIORITY) || defined(__DOXYGEN__)
+#define STM32_SERIAL_USART6_PRIORITY 12
+#endif
+/** @} */
+
+/*===========================================================================*/
+/* Derived constants and error checks. */
+/*===========================================================================*/
+
+#if STM32_SERIAL_USE_USART1 && !STM32_HAS_USART1
+#error "USART1 not present in the selected device"
+#endif
+
+#if STM32_SERIAL_USE_USART2 && !STM32_HAS_USART2
+#error "USART2 not present in the selected device"
+#endif
+
+#if STM32_SERIAL_USE_USART3 && !STM32_HAS_USART3
+#error "USART3 not present in the selected device"
+#endif
+
+#if STM32_SERIAL_USE_UART4 && !STM32_HAS_UART4
+#error "UART4 not present in the selected device"
+#endif
+
+#if STM32_SERIAL_USE_UART5 && !STM32_HAS_UART5
+#error "UART5 not present in the selected device"
+#endif
+
+#if STM32_SERIAL_USE_USART6 && !STM32_HAS_USART6
+#error "USART6 not present in the selected device"
+#endif
+
+#if !STM32_SERIAL_USE_USART1 && !STM32_SERIAL_USE_USART2 && \
+ !STM32_SERIAL_USE_USART3 && !STM32_SERIAL_USE_UART4 && \
+ !STM32_SERIAL_USE_UART5 && !STM32_SERIAL_USE_USART6
+#error "SERIAL driver activated but no USART/UART peripheral assigned"
+#endif
+
+#if STM32_SERIAL_USE_USART1 && \
+ !CORTEX_IS_VALID_KERNEL_PRIORITY(STM32_SERIAL_USART1_PRIORITY)
+#error "Invalid IRQ priority assigned to USART1"
+#endif
+
+#if STM32_SERIAL_USE_USART2 && \
+ !CORTEX_IS_VALID_KERNEL_PRIORITY(STM32_SERIAL_USART2_PRIORITY)
+#error "Invalid IRQ priority assigned to USART2"
+#endif
+
+#if STM32_SERIAL_USE_USART3 && \
+ !CORTEX_IS_VALID_KERNEL_PRIORITY(STM32_SERIAL_USART3_PRIORITY)
+#error "Invalid IRQ priority assigned to USART3"
+#endif
+
+#if STM32_SERIAL_USE_UART4 && \
+ !CORTEX_IS_VALID_KERNEL_PRIORITY(STM32_SERIAL_UART4_PRIORITY)
+#error "Invalid IRQ priority assigned to UART4"
+#endif
+
+#if STM32_SERIAL_USE_UART5 && \
+ !CORTEX_IS_VALID_KERNEL_PRIORITY(STM32_SERIAL_UART5_PRIORITY)
+#error "Invalid IRQ priority assigned to UART5"
+#endif
+
+#if STM32_SERIAL_USE_USART6 && \
+ !CORTEX_IS_VALID_KERNEL_PRIORITY(STM32_SERIAL_USART6_PRIORITY)
+#error "Invalid IRQ priority assigned to USART6"
+#endif
+
+/*===========================================================================*/
+/* Driver data structures and types. */
+/*===========================================================================*/
+
+/**
+ * @brief STM32 Serial Driver configuration structure.
+ * @details An instance of this structure must be passed to @p sdStart()
+ * in order to configure and start a serial driver operations.
+ * @note This structure content is architecture dependent, each driver
+ * implementation defines its own version and the custom static
+ * initializers.
+ */
+typedef struct {
+ /**
+ * @brief Bit rate.
+ */
+ uint32_t speed;
+ /* End of the mandatory fields.*/
+ /**
+ * @brief Initialization value for the CR1 register.
+ */
+ uint16_t cr1;
+ /**
+ * @brief Initialization value for the CR2 register.
+ */
+ uint16_t cr2;
+ /**
+ * @brief Initialization value for the CR3 register.
+ */
+ uint16_t cr3;
+} SerialConfig;
+
+/**
+ * @brief @p SerialDriver specific data.
+ */
+#define _serial_driver_data \
+ _base_asynchronous_channel_data \
+ /* Driver state.*/ \
+ sdstate_t state; \
+ /* Input queue.*/ \
+ InputQueue iqueue; \
+ /* Output queue.*/ \
+ OutputQueue oqueue; \
+ /* Input circular buffer.*/ \
+ uint8_t ib[SERIAL_BUFFERS_SIZE]; \
+ /* Output circular buffer.*/ \
+ uint8_t ob[SERIAL_BUFFERS_SIZE]; \
+ /* End of the mandatory fields.*/ \
+ /* Pointer to the USART registers block.*/ \
+ USART_TypeDef *usart;
+
+/*===========================================================================*/
+/* Driver macros. */
+/*===========================================================================*/
+
+/*
+ * Extra USARTs definitions here (missing from the ST header file).
+ */
+#define USART_CR2_STOP1_BITS (0 << 12) /**< @brief CR2 1 stop bit value.*/
+#define USART_CR2_STOP0P5_BITS (1 << 12) /**< @brief CR2 0.5 stop bit value.*/
+#define USART_CR2_STOP2_BITS (2 << 12) /**< @brief CR2 2 stop bit value.*/
+#define USART_CR2_STOP1P5_BITS (3 << 12) /**< @brief CR2 1.5 stop bit value.*/
+
+/*===========================================================================*/
+/* External declarations. */
+/*===========================================================================*/
+
+#if STM32_SERIAL_USE_USART1 && !defined(__DOXYGEN__)
+extern SerialDriver SD1;
+#endif
+#if STM32_SERIAL_USE_USART2 && !defined(__DOXYGEN__)
+extern SerialDriver SD2;
+#endif
+#if STM32_SERIAL_USE_USART3 && !defined(__DOXYGEN__)
+extern SerialDriver SD3;
+#endif
+#if STM32_SERIAL_USE_UART4 && !defined(__DOXYGEN__)
+extern SerialDriver SD4;
+#endif
+#if STM32_SERIAL_USE_UART5 && !defined(__DOXYGEN__)
+extern SerialDriver SD5;
+#endif
+#if STM32_SERIAL_USE_USART6 && !defined(__DOXYGEN__)
+extern SerialDriver SD6;
+#endif
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+ void sd_lld_init(void);
+ void sd_lld_start(SerialDriver *sdp, const SerialConfig *config);
+ void sd_lld_stop(SerialDriver *sdp);
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* HAL_USE_SERIAL */
+
+#endif /* _SERIAL_LLD_H_ */
+
+/** @} */
diff --git a/os/hal/platforms/STM32/USARTv1/uart_lld.c b/os/hal/platforms/STM32/USARTv1/uart_lld.c new file mode 100644 index 000000000..cad1cf084 --- /dev/null +++ b/os/hal/platforms/STM32/USARTv1/uart_lld.c @@ -0,0 +1,838 @@ +/*
+ ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+/**
+ * @file STM32/USARTv1/uart_lld.c
+ * @brief STM32 low level UART driver code.
+ *
+ * @addtogroup UART
+ * @{
+ */
+
+#include "ch.h"
+#include "hal.h"
+
+#if HAL_USE_UART || defined(__DOXYGEN__)
+
+/*===========================================================================*/
+/* Driver local definitions. */
+/*===========================================================================*/
+
+#define USART1_RX_DMA_CHANNEL \
+ STM32_DMA_GETCHANNEL(STM32_UART_USART1_RX_DMA_STREAM, \
+ STM32_USART1_RX_DMA_CHN)
+
+#define USART1_TX_DMA_CHANNEL \
+ STM32_DMA_GETCHANNEL(STM32_UART_USART1_TX_DMA_STREAM, \
+ STM32_USART1_TX_DMA_CHN)
+
+#define USART2_RX_DMA_CHANNEL \
+ STM32_DMA_GETCHANNEL(STM32_UART_USART2_RX_DMA_STREAM, \
+ STM32_USART2_RX_DMA_CHN)
+
+#define USART2_TX_DMA_CHANNEL \
+ STM32_DMA_GETCHANNEL(STM32_UART_USART2_TX_DMA_STREAM, \
+ STM32_USART2_TX_DMA_CHN)
+
+#define USART3_RX_DMA_CHANNEL \
+ STM32_DMA_GETCHANNEL(STM32_UART_USART3_RX_DMA_STREAM, \
+ STM32_USART3_RX_DMA_CHN)
+
+#define USART3_TX_DMA_CHANNEL \
+ STM32_DMA_GETCHANNEL(STM32_UART_USART3_TX_DMA_STREAM, \
+ STM32_USART3_TX_DMA_CHN)
+
+#define UART4_RX_DMA_CHANNEL \
+ STM32_DMA_GETCHANNEL(STM32_UART_UART4_RX_DMA_STREAM, \
+ STM32_UART4_RX_DMA_CHN)
+
+#define UART4_TX_DMA_CHANNEL \
+ STM32_DMA_GETCHANNEL(STM32_UART_UART4_TX_DMA_STREAM, \
+ STM32_UART4_TX_DMA_CHN)
+
+#define UART5_RX_DMA_CHANNEL \
+ STM32_DMA_GETCHANNEL(STM32_UART_UART5_RX_DMA_STREAM, \
+ STM32_UART5_RX_DMA_CHN)
+
+#define UART5_TX_DMA_CHANNEL \
+ STM32_DMA_GETCHANNEL(STM32_UART_UART5_TX_DMA_STREAM, \
+ STM32_UART5_TX_DMA_CHN)
+
+#define USART6_RX_DMA_CHANNEL \
+ STM32_DMA_GETCHANNEL(STM32_UART_USART6_RX_DMA_STREAM, \
+ STM32_USART6_RX_DMA_CHN)
+
+#define USART6_TX_DMA_CHANNEL \
+ STM32_DMA_GETCHANNEL(STM32_UART_USART6_TX_DMA_STREAM, \
+ STM32_USART6_TX_DMA_CHN)
+
+#if (STM32_UART_USE_UART4 || STM32_UART_USE_UART5)
+ #define STM32_UART45_CR2_CHECK_MASK (USART_CR2_STOP_0 | USART_CR2_CLKEN | \
+ USART_CR2_CPOL | USART_CR2_CPHA | USART_CR2_LBCL)
+
+ #define STM32_UART45_CR3_CHECK_MASK (USART_CR3_CTSIE | USART_CR3_CTSE | \
+ USART_CR3_RTSE | USART_CR3_SCEN | USART_CR3_NACK)
+#endif
+
+/*===========================================================================*/
+/* Driver exported variables. */
+/*===========================================================================*/
+
+/** @brief USART1 UART driver identifier.*/
+#if STM32_UART_USE_USART1 || defined(__DOXYGEN__)
+UARTDriver UARTD1;
+#endif
+
+/** @brief USART2 UART driver identifier.*/
+#if STM32_UART_USE_USART2 || defined(__DOXYGEN__)
+UARTDriver UARTD2;
+#endif
+
+/** @brief USART3 UART driver identifier.*/
+#if STM32_UART_USE_USART3 || defined(__DOXYGEN__)
+UARTDriver UARTD3;
+#endif
+
+/** @brief UART4 UART driver identifier.*/
+#if STM32_UART_USE_UART4 || defined(__DOXYGEN__)
+UARTDriver UARTD4;
+#endif
+
+/** @brief UART5 UART driver identifier.*/
+#if STM32_UART_USE_UART5 || defined(__DOXYGEN__)
+UARTDriver UARTD5;
+#endif
+
+/** @brief USART6 UART driver identifier.*/
+#if STM32_UART_USE_USART6 || defined(__DOXYGEN__)
+UARTDriver UARTD6;
+#endif
+
+/*===========================================================================*/
+/* Driver local variables and types. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver local functions. */
+/*===========================================================================*/
+
+/**
+ * @brief Status bits translation.
+ *
+ * @param[in] sr USART SR register value
+ *
+ * @return The error flags.
+ */
+static uartflags_t translate_errors(uint16_t sr) {
+ uartflags_t sts = 0;
+
+ if (sr & USART_SR_ORE)
+ sts |= UART_OVERRUN_ERROR;
+ if (sr & USART_SR_PE)
+ sts |= UART_PARITY_ERROR;
+ if (sr & USART_SR_FE)
+ sts |= UART_FRAMING_ERROR;
+ if (sr & USART_SR_NE)
+ sts |= UART_NOISE_ERROR;
+ if (sr & USART_SR_LBD)
+ sts |= UART_BREAK_DETECTED;
+ return sts;
+}
+
+/**
+ * @brief Puts the receiver in the UART_RX_IDLE state.
+ *
+ * @param[in] uartp pointer to the @p UARTDriver object
+ */
+static void set_rx_idle_loop(UARTDriver *uartp) {
+ uint32_t mode;
+
+ /* RX DMA channel preparation, if the char callback is defined then the
+ TCIE interrupt is enabled too.*/
+ if (uartp->config->rxchar_cb == NULL)
+ mode = STM32_DMA_CR_DIR_P2M | STM32_DMA_CR_CIRC;
+ else
+ mode = STM32_DMA_CR_DIR_P2M | STM32_DMA_CR_CIRC | STM32_DMA_CR_TCIE;
+ dmaStreamSetMemory0(uartp->dmarx, &uartp->rxbuf);
+ dmaStreamSetTransactionSize(uartp->dmarx, 1);
+ dmaStreamSetMode(uartp->dmarx, uartp->dmamode | mode);
+ dmaStreamEnable(uartp->dmarx);
+}
+
+/**
+ * @brief USART de-initialization.
+ * @details This function must be invoked with interrupts disabled.
+ *
+ * @param[in] uartp pointer to the @p UARTDriver object
+ */
+static void usart_stop(UARTDriver *uartp) {
+
+ /* Stops RX and TX DMA channels.*/
+ dmaStreamDisable(uartp->dmarx);
+ dmaStreamDisable(uartp->dmatx);
+
+ /* Stops USART operations.*/
+ uartp->usart->CR1 = 0;
+ uartp->usart->CR2 = 0;
+ uartp->usart->CR3 = 0;
+}
+
+/**
+ * @brief USART initialization.
+ * @details This function must be invoked with interrupts disabled.
+ *
+ * @param[in] uartp pointer to the @p UARTDriver object
+ */
+static void usart_start(UARTDriver *uartp) {
+ uint16_t cr1;
+ USART_TypeDef *u = uartp->usart;
+
+ /* Defensive programming, starting from a clean state.*/
+ usart_stop(uartp);
+
+ /* Baud rate setting.*/
+#if STM32_HAS_USART6
+ if ((uartp->usart == USART1) || (uartp->usart == USART6))
+#else
+ if (uartp->usart == USART1)
+#endif
+ u->BRR = STM32_PCLK2 / uartp->config->speed;
+ else
+ u->BRR = STM32_PCLK1 / uartp->config->speed;
+
+ /* Resetting eventual pending status flags.*/
+ (void)u->SR; /* SR reset step 1.*/
+ (void)u->DR; /* SR reset step 2.*/
+ u->SR = 0;
+
+ /* Note that some bits are enforced because required for correct driver
+ operations.*/
+ u->CR2 = uartp->config->cr2 | USART_CR2_LBDIE;
+ u->CR3 = uartp->config->cr3 | USART_CR3_DMAT | USART_CR3_DMAR |
+ USART_CR3_EIE;
+ if (uartp->config->txend2_cb == NULL)
+ cr1 = USART_CR1_UE | USART_CR1_PEIE | USART_CR1_TE | USART_CR1_RE;
+ else
+ cr1 = USART_CR1_UE | USART_CR1_PEIE | USART_CR1_TE | USART_CR1_RE |
+ USART_CR1_TCIE;
+ u->CR1 = uartp->config->cr1 | cr1;
+
+ /* Starting the receiver idle loop.*/
+ set_rx_idle_loop(uartp);
+}
+
+/**
+ * @brief RX DMA common service routine.
+ *
+ * @param[in] uartp pointer to the @p UARTDriver object
+ * @param[in] flags pre-shifted content of the ISR register
+ */
+static void uart_lld_serve_rx_end_irq(UARTDriver *uartp, uint32_t flags) {
+
+ /* DMA errors handling.*/
+#if defined(STM32_UART_DMA_ERROR_HOOK)
+ if ((flags & (STM32_DMA_ISR_TEIF | STM32_DMA_ISR_DMEIF)) != 0) {
+ STM32_UART_DMA_ERROR_HOOK(uartp);
+ }
+#else
+ (void)flags;
+#endif
+
+ if (uartp->rxstate == UART_RX_IDLE) {
+ /* Receiver in idle state, a callback is generated, if enabled, for each
+ received character and then the driver stays in the same state.*/
+ if (uartp->config->rxchar_cb != NULL)
+ uartp->config->rxchar_cb(uartp, uartp->rxbuf);
+ }
+ else {
+ /* Receiver in active state, a callback is generated, if enabled, after
+ a completed transfer.*/
+ dmaStreamDisable(uartp->dmarx);
+ uartp->rxstate = UART_RX_COMPLETE;
+ if (uartp->config->rxend_cb != NULL)
+ uartp->config->rxend_cb(uartp);
+
+ /* If the callback didn't explicitly change state then the receiver
+ automatically returns to the idle state.*/
+ if (uartp->rxstate == UART_RX_COMPLETE) {
+ uartp->rxstate = UART_RX_IDLE;
+ set_rx_idle_loop(uartp);
+ }
+ }
+}
+
+/**
+ * @brief TX DMA common service routine.
+ *
+ * @param[in] uartp pointer to the @p UARTDriver object
+ * @param[in] flags pre-shifted content of the ISR register
+ */
+static void uart_lld_serve_tx_end_irq(UARTDriver *uartp, uint32_t flags) {
+
+ /* DMA errors handling.*/
+#if defined(STM32_UART_DMA_ERROR_HOOK)
+ if ((flags & (STM32_DMA_ISR_TEIF | STM32_DMA_ISR_DMEIF)) != 0) {
+ STM32_UART_DMA_ERROR_HOOK(uartp);
+ }
+#else
+ (void)flags;
+#endif
+
+ dmaStreamDisable(uartp->dmatx);
+
+ /* A callback is generated, if enabled, after a completed transfer.*/
+ uartp->txstate = UART_TX_COMPLETE;
+ if (uartp->config->txend1_cb != NULL)
+ uartp->config->txend1_cb(uartp);
+
+ /* If the callback didn't explicitly change state then the transmitter
+ automatically returns to the idle state.*/
+ if (uartp->txstate == UART_TX_COMPLETE)
+ uartp->txstate = UART_TX_IDLE;
+}
+
+/**
+ * @brief USART common service routine.
+ *
+ * @param[in] uartp pointer to the @p UARTDriver object
+ */
+static void serve_usart_irq(UARTDriver *uartp) {
+ uint16_t sr;
+ USART_TypeDef *u = uartp->usart;
+
+ sr = u->SR; /* SR reset step 1.*/
+ (void)u->DR; /* SR reset step 2.*/
+ if (sr & (USART_SR_LBD | USART_SR_ORE | USART_SR_NE |
+ USART_SR_FE | USART_SR_PE)) {
+ u->SR = ~USART_SR_LBD;
+ if (uartp->config->rxerr_cb != NULL)
+ uartp->config->rxerr_cb(uartp, translate_errors(sr));
+ }
+ if (sr & USART_SR_TC) {
+ u->SR = ~USART_SR_TC;
+
+ /* End of transmission, a callback is generated.*/
+ if (uartp->config->txend2_cb != NULL)
+ uartp->config->txend2_cb(uartp);
+ }
+}
+
+/*===========================================================================*/
+/* Driver interrupt handlers. */
+/*===========================================================================*/
+
+#if STM32_UART_USE_USART1 || defined(__DOXYGEN__)
+#if !defined(STM32_USART1_HANDLER)
+#error "STM32_USART1_HANDLER not defined"
+#endif
+/**
+ * @brief USART1 IRQ handler.
+ *
+ * @isr
+ */
+CH_IRQ_HANDLER(STM32_USART1_HANDLER) {
+
+ CH_IRQ_PROLOGUE();
+
+ serve_usart_irq(&UARTD1);
+
+ CH_IRQ_EPILOGUE();
+}
+#endif /* STM32_UART_USE_USART1 */
+
+#if STM32_UART_USE_USART2 || defined(__DOXYGEN__)
+#if !defined(STM32_USART2_HANDLER)
+#error "STM32_USART2_HANDLER not defined"
+#endif
+/**
+ * @brief USART2 IRQ handler.
+ *
+ * @isr
+ */
+CH_IRQ_HANDLER(STM32_USART2_HANDLER) {
+
+ CH_IRQ_PROLOGUE();
+
+ serve_usart_irq(&UARTD2);
+
+ CH_IRQ_EPILOGUE();
+}
+#endif /* STM32_UART_USE_USART2 */
+
+#if STM32_UART_USE_USART3 || defined(__DOXYGEN__)
+#if !defined(STM32_USART3_HANDLER)
+#error "STM32_USART3_HANDLER not defined"
+#endif
+/**
+ * @brief USART3 IRQ handler.
+ *
+ * @isr
+ */
+CH_IRQ_HANDLER(STM32_USART3_HANDLER) {
+
+ CH_IRQ_PROLOGUE();
+
+ serve_usart_irq(&UARTD3);
+
+ CH_IRQ_EPILOGUE();
+}
+#endif /* STM32_UART_USE_USART3 */
+
+#if STM32_UART_USE_UART4 || defined(__DOXYGEN__)
+#if !defined(STM32_UART4_HANDLER)
+#error "STM32_UART4_HANDLER not defined"
+#endif
+/**
+ * @brief UART4 IRQ handler.
+ *
+ * @isr
+ */
+CH_IRQ_HANDLER(STM32_UART4_HANDLER) {
+
+ CH_IRQ_PROLOGUE();
+
+ serve_usart_irq(&UARTD4);
+
+ CH_IRQ_EPILOGUE();
+}
+#endif /* STM32_UART_USE_UART4 */
+
+#if STM32_UART_USE_UART5 || defined(__DOXYGEN__)
+#if !defined(STM32_UART5_HANDLER)
+#error "STM32_UART5_HANDLER not defined"
+#endif
+/**
+ * @brief UART5 IRQ handler.
+ *
+ * @isr
+ */
+CH_IRQ_HANDLER(STM32_UART5_HANDLER) {
+
+ CH_IRQ_PROLOGUE();
+
+ serve_usart_irq(&UARTD5);
+
+ CH_IRQ_EPILOGUE();
+}
+#endif /* STM32_UART_USE_UART5 */
+
+#if STM32_UART_USE_USART6 || defined(__DOXYGEN__)
+#if !defined(STM32_USART6_HANDLER)
+#error "STM32_USART6_HANDLER not defined"
+#endif
+/**
+ * @brief USART6 IRQ handler.
+ *
+ * @isr
+ */
+CH_IRQ_HANDLER(STM32_USART6_HANDLER) {
+
+ CH_IRQ_PROLOGUE();
+
+ serve_usart_irq(&UARTD6);
+
+ CH_IRQ_EPILOGUE();
+}
+#endif /* STM32_UART_USE_USART6 */
+
+/*===========================================================================*/
+/* Driver exported functions. */
+/*===========================================================================*/
+
+/**
+ * @brief Low level UART driver initialization.
+ *
+ * @notapi
+ */
+void uart_lld_init(void) {
+
+#if STM32_UART_USE_USART1
+ uartObjectInit(&UARTD1);
+ UARTD1.usart = USART1;
+ UARTD1.dmamode = STM32_DMA_CR_DMEIE | STM32_DMA_CR_TEIE;
+ UARTD1.dmarx = STM32_DMA_STREAM(STM32_UART_USART1_RX_DMA_STREAM);
+ UARTD1.dmatx = STM32_DMA_STREAM(STM32_UART_USART1_TX_DMA_STREAM);
+#endif
+
+#if STM32_UART_USE_USART2
+ uartObjectInit(&UARTD2);
+ UARTD2.usart = USART2;
+ UARTD2.dmamode = STM32_DMA_CR_DMEIE | STM32_DMA_CR_TEIE;
+ UARTD2.dmarx = STM32_DMA_STREAM(STM32_UART_USART2_RX_DMA_STREAM);
+ UARTD2.dmatx = STM32_DMA_STREAM(STM32_UART_USART2_TX_DMA_STREAM);
+#endif
+
+#if STM32_UART_USE_USART3
+ uartObjectInit(&UARTD3);
+ UARTD3.usart = USART3;
+ UARTD3.dmamode = STM32_DMA_CR_DMEIE | STM32_DMA_CR_TEIE;
+ UARTD3.dmarx = STM32_DMA_STREAM(STM32_UART_USART3_RX_DMA_STREAM);
+ UARTD3.dmatx = STM32_DMA_STREAM(STM32_UART_USART3_TX_DMA_STREAM);
+#endif
+
+#if STM32_UART_USE_UART4
+ uartObjectInit(&UARTD4);
+ UARTD4.usart = UART4;
+ UARTD4.dmamode = STM32_DMA_CR_DMEIE | STM32_DMA_CR_TEIE;
+ UARTD4.dmarx = STM32_DMA_STREAM(STM32_UART_UART4_RX_DMA_STREAM);
+ UARTD4.dmatx = STM32_DMA_STREAM(STM32_UART_UART4_TX_DMA_STREAM);
+#endif
+
+#if STM32_UART_USE_UART5
+ uartObjectInit(&UARTD5);
+ UARTD5.usart = UART5;
+ UARTD5.dmamode = STM32_DMA_CR_DMEIE | STM32_DMA_CR_TEIE;
+ UARTD5.dmarx = STM32_DMA_STREAM(STM32_UART_UART5_RX_DMA_STREAM);
+ UARTD5.dmatx = STM32_DMA_STREAM(STM32_UART_UART5_TX_DMA_STREAM);
+#endif
+
+#if STM32_UART_USE_USART6
+ uartObjectInit(&UARTD6);
+ UARTD6.usart = USART6;
+ UARTD6.dmarx = STM32_DMA_STREAM(STM32_UART_USART6_RX_DMA_STREAM);
+ UARTD6.dmatx = STM32_DMA_STREAM(STM32_UART_USART6_TX_DMA_STREAM);
+#endif
+}
+
+/**
+ * @brief Check CR2 and CR3 values for compatibility with UART4, UART5.
+ *
+ * @param[in] uartp pointer to the @p UARTDriver object
+ *
+ * @notapi
+ */
+#if (STM32_UART_USE_UART4 || STM32_UART_USE_UART5)
+static void uart_check_config(const UARTDriver *uartp) {
+
+ uint16_t cr;
+
+ cr = uartp->config->cr2;
+ chDbgCheck((cr & STM32_UART45_CR2_CHECK_MASK) == 0,
+ "Some flags from CR2 unavailable for this UART");
+
+ cr = uartp->config->cr3;
+ chDbgCheck((cr & STM32_UART45_CR3_CHECK_MASK) == 0,
+ "Some flags from CR3 unavailable for this UART");
+}
+#endif /* (STM32_UART_USE_UART4 || STM32_UART_USE_UART5) */
+
+/**
+ * @brief Configures and activates the UART peripheral.
+ *
+ * @param[in] uartp pointer to the @p UARTDriver object
+ *
+ * @notapi
+ */
+void uart_lld_start(UARTDriver *uartp) {
+
+#if STM32_UART_USE_UART4
+ if (uartp == &UARTD4)
+ uart_check_config(uartp);
+#elif STM32_UART_USE_UART5
+ else if (uartp == &UARTD5)
+ uart_check_config(uartp);
+#endif
+
+ if (uartp->state == UART_STOP) {
+#if STM32_UART_USE_USART1
+ if (&UARTD1 == uartp) {
+ bool_t b;
+ b = dmaStreamAllocate(uartp->dmarx,
+ STM32_UART_USART1_IRQ_PRIORITY,
+ (stm32_dmaisr_t)uart_lld_serve_rx_end_irq,
+ (void *)uartp);
+ chDbgAssert(!b, "uart_lld_start(), #1", "stream already allocated");
+ b = dmaStreamAllocate(uartp->dmatx,
+ STM32_UART_USART1_IRQ_PRIORITY,
+ (stm32_dmaisr_t)uart_lld_serve_tx_end_irq,
+ (void *)uartp);
+ chDbgAssert(!b, "uart_lld_start(), #2", "stream already allocated");
+ rccEnableUSART1(FALSE);
+ nvicEnableVector(STM32_USART1_NUMBER,
+ CORTEX_PRIORITY_MASK(STM32_UART_USART1_IRQ_PRIORITY));
+ uartp->dmamode |= STM32_DMA_CR_CHSEL(USART1_RX_DMA_CHANNEL) |
+ STM32_DMA_CR_PL(STM32_UART_USART1_DMA_PRIORITY);
+ }
+#endif
+
+#if STM32_UART_USE_USART2
+ if (&UARTD2 == uartp) {
+ bool_t b;
+ b = dmaStreamAllocate(uartp->dmarx,
+ STM32_UART_USART2_IRQ_PRIORITY,
+ (stm32_dmaisr_t)uart_lld_serve_rx_end_irq,
+ (void *)uartp);
+ chDbgAssert(!b, "uart_lld_start(), #3", "stream already allocated");
+ b = dmaStreamAllocate(uartp->dmatx,
+ STM32_UART_USART2_IRQ_PRIORITY,
+ (stm32_dmaisr_t)uart_lld_serve_tx_end_irq,
+ (void *)uartp);
+ chDbgAssert(!b, "uart_lld_start(), #4", "stream already allocated");
+ rccEnableUSART2(FALSE);
+ nvicEnableVector(STM32_USART2_NUMBER,
+ CORTEX_PRIORITY_MASK(STM32_UART_USART2_IRQ_PRIORITY));
+ uartp->dmamode |= STM32_DMA_CR_CHSEL(USART2_RX_DMA_CHANNEL) |
+ STM32_DMA_CR_PL(STM32_UART_USART2_DMA_PRIORITY);
+ }
+#endif
+
+#if STM32_UART_USE_USART3
+ if (&UARTD3 == uartp) {
+ bool_t b;
+ b = dmaStreamAllocate(uartp->dmarx,
+ STM32_UART_USART3_IRQ_PRIORITY,
+ (stm32_dmaisr_t)uart_lld_serve_rx_end_irq,
+ (void *)uartp);
+ chDbgAssert(!b, "uart_lld_start(), #5", "stream already allocated");
+ b = dmaStreamAllocate(uartp->dmatx,
+ STM32_UART_USART3_IRQ_PRIORITY,
+ (stm32_dmaisr_t)uart_lld_serve_tx_end_irq,
+ (void *)uartp);
+ chDbgAssert(!b, "uart_lld_start(), #6", "stream already allocated");
+ rccEnableUSART3(FALSE);
+ nvicEnableVector(STM32_USART3_NUMBER,
+ CORTEX_PRIORITY_MASK(STM32_UART_USART3_IRQ_PRIORITY));
+ uartp->dmamode |= STM32_DMA_CR_CHSEL(USART3_RX_DMA_CHANNEL) |
+ STM32_DMA_CR_PL(STM32_UART_USART3_DMA_PRIORITY);
+ }
+#endif
+
+#if STM32_UART_USE_UART4
+ if (&UARTD4 == uartp) {
+ bool_t b;
+ b = dmaStreamAllocate(uartp->dmarx,
+ STM32_UART_UART4_IRQ_PRIORITY,
+ (stm32_dmaisr_t)uart_lld_serve_rx_end_irq,
+ (void *)uartp);
+ chDbgAssert(!b, "uart_lld_start(), #7", "stream already allocated");
+ b = dmaStreamAllocate(uartp->dmatx,
+ STM32_UART_UART4_IRQ_PRIORITY,
+ (stm32_dmaisr_t)uart_lld_serve_tx_end_irq,
+ (void *)uartp);
+ chDbgAssert(!b, "uart_lld_start(), #8", "stream already allocated");
+ rccEnableUART4(FALSE);
+ nvicEnableVector(STM32_UART4_NUMBER,
+ CORTEX_PRIORITY_MASK(STM32_UART_UART4_IRQ_PRIORITY));
+ uartp->dmamode |= STM32_DMA_CR_CHSEL(UART4_RX_DMA_CHANNEL) |
+ STM32_DMA_CR_PL(STM32_UART_UART4_DMA_PRIORITY);
+ }
+#endif
+
+#if STM32_UART_USE_UART5
+ if (&UARTD5 == uartp) {
+ bool_t b;
+ b = dmaStreamAllocate(uartp->dmarx,
+ STM32_UART_UART5_IRQ_PRIORITY,
+ (stm32_dmaisr_t)uart_lld_serve_rx_end_irq,
+ (void *)uartp);
+ chDbgAssert(!b, "uart_lld_start(), #9", "stream already allocated");
+ b = dmaStreamAllocate(uartp->dmatx,
+ STM32_UART_UART5_IRQ_PRIORITY,
+ (stm32_dmaisr_t)uart_lld_serve_tx_end_irq,
+ (void *)uartp);
+ chDbgAssert(!b, "uart_lld_start(), #10", "stream already allocated");
+ rccEnableUART5(FALSE);
+ nvicEnableVector(STM32_UART5_NUMBER,
+ CORTEX_PRIORITY_MASK(STM32_UART_UART5_IRQ_PRIORITY));
+ uartp->dmamode |= STM32_DMA_CR_CHSEL(UART5_RX_DMA_CHANNEL) |
+ STM32_DMA_CR_PL(STM32_UART_UART5_DMA_PRIORITY);
+ }
+#endif
+
+#if STM32_UART_USE_USART6
+ if (&UARTD6 == uartp) {
+ bool_t b;
+ b = dmaStreamAllocate(uartp->dmarx,
+ STM32_UART_USART6_IRQ_PRIORITY,
+ (stm32_dmaisr_t)uart_lld_serve_rx_end_irq,
+ (void *)uartp);
+ chDbgAssert(!b, "uart_lld_start(), #11", "stream already allocated");
+ b = dmaStreamAllocate(uartp->dmatx,
+ STM32_UART_USART6_IRQ_PRIORITY,
+ (stm32_dmaisr_t)uart_lld_serve_tx_end_irq,
+ (void *)uartp);
+ chDbgAssert(!b, "uart_lld_start(), #12", "stream already allocated");
+ rccEnableUSART6(FALSE);
+ nvicEnableVector(STM32_USART6_NUMBER,
+ CORTEX_PRIORITY_MASK(STM32_UART_USART6_IRQ_PRIORITY));
+ uartp->dmamode |= STM32_DMA_CR_CHSEL(USART6_RX_DMA_CHANNEL) |
+ STM32_DMA_CR_PL(STM32_UART_USART6_DMA_PRIORITY);
+ }
+#endif
+
+ /* Static DMA setup, the transfer size depends on the USART settings,
+ it is 16 bits if M=1 and PCE=0 else it is 8 bits.*/
+ if ((uartp->config->cr1 & (USART_CR1_M | USART_CR1_PCE)) == USART_CR1_M)
+ uartp->dmamode |= STM32_DMA_CR_PSIZE_HWORD | STM32_DMA_CR_MSIZE_HWORD;
+ dmaStreamSetPeripheral(uartp->dmarx, &uartp->usart->DR);
+ dmaStreamSetPeripheral(uartp->dmatx, &uartp->usart->DR);
+ uartp->rxbuf = 0;
+ }
+
+ uartp->rxstate = UART_RX_IDLE;
+ uartp->txstate = UART_TX_IDLE;
+ usart_start(uartp);
+}
+
+/**
+ * @brief Deactivates the UART peripheral.
+ *
+ * @param[in] uartp pointer to the @p UARTDriver object
+ *
+ * @notapi
+ */
+void uart_lld_stop(UARTDriver *uartp) {
+
+ if (uartp->state == UART_READY) {
+ usart_stop(uartp);
+ dmaStreamRelease(uartp->dmarx);
+ dmaStreamRelease(uartp->dmatx);
+
+#if STM32_UART_USE_USART1
+ if (&UARTD1 == uartp) {
+ nvicDisableVector(STM32_USART1_NUMBER);
+ rccDisableUSART1(FALSE);
+ return;
+ }
+#endif
+
+#if STM32_UART_USE_USART2
+ if (&UARTD2 == uartp) {
+ nvicDisableVector(STM32_USART2_NUMBER);
+ rccDisableUSART2(FALSE);
+ return;
+ }
+#endif
+
+#if STM32_UART_USE_USART3
+ if (&UARTD3 == uartp) {
+ nvicDisableVector(STM32_USART3_NUMBER);
+ rccDisableUSART3(FALSE);
+ return;
+ }
+#endif
+
+#if STM32_UART_USE_UART4
+ if (&UARTD4 == uartp) {
+ nvicDisableVector(STM32_UART4_NUMBER);
+ rccDisableUART4(FALSE);
+ return;
+ }
+#endif
+
+#if STM32_UART_USE_UART5
+ if (&UARTD5 == uartp) {
+ nvicDisableVector(STM32_UART5_NUMBER);
+ rccDisableUART5(FALSE);
+ return;
+ }
+#endif
+
+#if STM32_UART_USE_USART6
+ if (&UARTD6 == uartp) {
+ nvicDisableVector(STM32_USART6_NUMBER);
+ rccDisableUSART6(FALSE);
+ return;
+ }
+#endif
+ }
+}
+
+/**
+ * @brief Starts a transmission on the UART peripheral.
+ * @note The buffers are organized as uint8_t arrays for data sizes below
+ * or equal to 8 bits else it is organized as uint16_t arrays.
+ *
+ * @param[in] uartp pointer to the @p UARTDriver object
+ * @param[in] n number of data frames to send
+ * @param[in] txbuf the pointer to the transmit buffer
+ *
+ * @notapi
+ */
+void uart_lld_start_send(UARTDriver *uartp, size_t n, const void *txbuf) {
+
+ /* TX DMA channel preparation and start.*/
+ dmaStreamSetMemory0(uartp->dmatx, txbuf);
+ dmaStreamSetTransactionSize(uartp->dmatx, n);
+ dmaStreamSetMode(uartp->dmatx, uartp->dmamode | STM32_DMA_CR_DIR_M2P |
+ STM32_DMA_CR_MINC | STM32_DMA_CR_TCIE);
+ dmaStreamEnable(uartp->dmatx);
+}
+
+/**
+ * @brief Stops any ongoing transmission.
+ * @note Stopping a transmission also suppresses the transmission callbacks.
+ *
+ * @param[in] uartp pointer to the @p UARTDriver object
+ *
+ * @return The number of data frames not transmitted by the
+ * stopped transmit operation.
+ *
+ * @notapi
+ */
+size_t uart_lld_stop_send(UARTDriver *uartp) {
+
+ dmaStreamDisable(uartp->dmatx);
+ return dmaStreamGetTransactionSize(uartp->dmatx);
+}
+
+/**
+ * @brief Starts a receive operation on the UART peripheral.
+ * @note The buffers are organized as uint8_t arrays for data sizes below
+ * or equal to 8 bits else it is organized as uint16_t arrays.
+ *
+ * @param[in] uartp pointer to the @p UARTDriver object
+ * @param[in] n number of data frames to send
+ * @param[out] rxbuf the pointer to the receive buffer
+ *
+ * @notapi
+ */
+void uart_lld_start_receive(UARTDriver *uartp, size_t n, void *rxbuf) {
+
+ /* Stopping previous activity (idle state).*/
+ dmaStreamDisable(uartp->dmarx);
+
+ /* RX DMA channel preparation and start.*/
+ dmaStreamSetMemory0(uartp->dmarx, rxbuf);
+ dmaStreamSetTransactionSize(uartp->dmarx, n);
+ dmaStreamSetMode(uartp->dmarx, uartp->dmamode | STM32_DMA_CR_DIR_P2M |
+ STM32_DMA_CR_MINC | STM32_DMA_CR_TCIE);
+ dmaStreamEnable(uartp->dmarx);
+}
+
+/**
+ * @brief Stops any ongoing receive operation.
+ * @note Stopping a receive operation also suppresses the receive callbacks.
+ *
+ * @param[in] uartp pointer to the @p UARTDriver object
+ *
+ * @return The number of data frames not received by the
+ * stopped receive operation.
+ *
+ * @notapi
+ */
+size_t uart_lld_stop_receive(UARTDriver *uartp) {
+ size_t n;
+
+ dmaStreamDisable(uartp->dmarx);
+ n = dmaStreamGetTransactionSize(uartp->dmarx);
+ set_rx_idle_loop(uartp);
+ return n;
+}
+
+#endif /* HAL_USE_UART */
+
+/** @} */
diff --git a/os/hal/platforms/STM32/USARTv1/uart_lld.h b/os/hal/platforms/STM32/USARTv1/uart_lld.h new file mode 100644 index 000000000..ba8f00f1e --- /dev/null +++ b/os/hal/platforms/STM32/USARTv1/uart_lld.h @@ -0,0 +1,680 @@ +/*
+ ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+/**
+ * @file STM32/USARTv1/uart_lld.h
+ * @brief STM32 low level UART driver header.
+ *
+ * @addtogroup UART
+ * @{
+ */
+
+#ifndef _UART_LLD_H_
+#define _UART_LLD_H_
+
+#if HAL_USE_UART || defined(__DOXYGEN__)
+
+/*===========================================================================*/
+/* Driver constants. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver pre-compile time settings. */
+/*===========================================================================*/
+
+/**
+ * @name Configuration options
+ * @{
+ */
+/**
+ * @brief UART driver on USART1 enable switch.
+ * @details If set to @p TRUE the support for USART1 is included.
+ * @note The default is @p FALSE.
+ */
+#if !defined(STM32_UART_USE_USART1) || defined(__DOXYGEN__)
+#define STM32_UART_USE_USART1 FALSE
+#endif
+
+/**
+ * @brief UART driver on USART2 enable switch.
+ * @details If set to @p TRUE the support for USART2 is included.
+ * @note The default is @p FALSE.
+ */
+#if !defined(STM32_UART_USE_USART2) || defined(__DOXYGEN__)
+#define STM32_UART_USE_USART2 FALSE
+#endif
+
+/**
+ * @brief UART driver on USART3 enable switch.
+ * @details If set to @p TRUE the support for USART3 is included.
+ * @note The default is @p FALSE.
+ */
+#if !defined(STM32_UART_USE_USART3) || defined(__DOXYGEN__)
+#define STM32_UART_USE_USART3 FALSE
+#endif
+
+/**
+ * @brief UART driver on UART4 enable switch.
+ * @details If set to @p TRUE the support for UART4 is included.
+ * @note The default is @p FALSE.
+ */
+#if !defined(STM32_UART_USE_UART4) || defined(__DOXYGEN__)
+#define STM32_UART_USE_UART4 FALSE
+#endif
+
+/**
+ * @brief UART driver on UART5 enable switch.
+ * @details If set to @p TRUE the support for UART5 is included.
+ * @note The default is @p FALSE.
+ */
+#if !defined(STM32_UART_USE_UART4) || defined(__DOXYGEN__)
+#define STM32_UART_USE_UART5 FALSE
+#endif
+
+/**
+ * @brief UART driver on USART6 enable switch.
+ * @details If set to @p TRUE the support for USART6 is included.
+ * @note The default is @p FALSE.
+ */
+#if !defined(STM32_UART_USE_USART6) || defined(__DOXYGEN__)
+#define STM32_UART_USE_USART6 FALSE
+#endif
+
+/**
+ * @brief USART1 interrupt priority level setting.
+ */
+#if !defined(STM32_UART_USART1_IRQ_PRIORITY) || defined(__DOXYGEN__)
+#define STM32_UART_USART1_IRQ_PRIORITY 12
+#endif
+
+/**
+ * @brief USART2 interrupt priority level setting.
+ */
+#if !defined(STM32_UART_USART2_IRQ_PRIORITY) || defined(__DOXYGEN__)
+#define STM32_UART_USART2_IRQ_PRIORITY 12
+#endif
+
+/**
+ * @brief USART3 interrupt priority level setting.
+ */
+#if !defined(STM32_UART_USART3_IRQ_PRIORITY) || defined(__DOXYGEN__)
+#define STM32_UART_USART3_IRQ_PRIORITY 12
+#endif
+
+/**
+ * @brief UART4 interrupt priority level setting.
+ */
+#if !defined(STM32_UART_UART4_IRQ_PRIORITY) || defined(__DOXYGEN__)
+#define STM32_UART_UART4_IRQ_PRIORITY 12
+#endif
+
+/**
+ * @brief UART5 interrupt priority level setting.
+ */
+#if !defined(STM32_UART_UART5_IRQ_PRIORITY) || defined(__DOXYGEN__)
+#define STM32_UART_UART5_IRQ_PRIORITY 12
+#endif
+
+/**
+ * @brief USART6 interrupt priority level setting.
+ */
+#if !defined(STM32_UART_USART6_IRQ_PRIORITY) || defined(__DOXYGEN__)
+#define STM32_UART_USART6_IRQ_PRIORITY 12
+#endif
+
+/**
+ * @brief USART1 DMA priority (0..3|lowest..highest).
+ * @note The priority level is used for both the TX and RX DMA channels but
+ * because of the channels ordering the RX channel has always priority
+ * over the TX channel.
+ */
+#if !defined(STM32_UART_USART1_DMA_PRIORITY) || defined(__DOXYGEN__)
+#define STM32_UART_USART1_DMA_PRIORITY 0
+#endif
+
+/**
+ * @brief USART2 DMA priority (0..3|lowest..highest).
+ * @note The priority level is used for both the TX and RX DMA channels but
+ * because of the channels ordering the RX channel has always priority
+ * over the TX channel.
+ */
+#if !defined(STM32_UART_USART2_DMA_PRIORITY) || defined(__DOXYGEN__)
+#define STM32_UART_USART2_DMA_PRIORITY 0
+#endif
+
+/**
+ * @brief USART3 DMA priority (0..3|lowest..highest).
+ * @note The priority level is used for both the TX and RX DMA channels but
+ * because of the channels ordering the RX channel has always priority
+ * over the TX channel.
+ */
+#if !defined(STM32_UART_USART3_DMA_PRIORITY) || defined(__DOXYGEN__)
+#define STM32_UART_USART3_DMA_PRIORITY 0
+#endif
+
+/**
+ * @brief UART4 DMA priority (0..3|lowest..highest).
+ * @note The priority level is used for both the TX and RX DMA channels but
+ * because of the channels ordering the RX channel has always priority
+ * over the TX channel.
+ */
+#if !defined(STM32_UART_UART4_DMA_PRIORITY) || defined(__DOXYGEN__)
+#define STM32_UART_UART4_DMA_PRIORITY 0
+#endif
+
+/**
+ * @brief UART5 DMA priority (0..3|lowest..highest).
+ * @note The priority level is used for both the TX and RX DMA channels but
+ * because of the channels ordering the RX channel has always priority
+ * over the TX channel.
+ */
+#if !defined(STM32_UART_UART5_DMA_PRIORITY) || defined(__DOXYGEN__)
+#define STM32_UART_UART5_DMA_PRIORITY 0
+#endif
+
+/**
+ * @brief USART6 DMA priority (0..3|lowest..highest).
+ * @note The priority level is used for both the TX and RX DMA channels but
+ * because of the channels ordering the RX channel has always priority
+ * over the TX channel.
+ */
+#if !defined(STM32_UART_USART6_DMA_PRIORITY) || defined(__DOXYGEN__)
+#define STM32_UART_USART6_DMA_PRIORITY 0
+#endif
+
+/**
+ * @brief USART DMA error hook.
+ * @note The default action for DMA errors is a system halt because DMA
+ * error can only happen because programming errors.
+ */
+#if !defined(STM32_UART_DMA_ERROR_HOOK) || defined(__DOXYGEN__)
+#define STM32_UART_DMA_ERROR_HOOK(uartp) chSysHalt()
+#endif
+
+#if STM32_ADVANCED_DMA || defined(__DOXYGEN__)
+
+/**
+ * @brief DMA stream used for USART1 RX operations.
+ * @note This option is only available on platforms with enhanced DMA.
+ */
+#if !defined(STM32_UART_USART1_RX_DMA_STREAM) || defined(__DOXYGEN__)
+#define STM32_UART_USART1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 5)
+#endif
+
+/**
+ * @brief DMA stream used for USART1 TX operations.
+ * @note This option is only available on platforms with enhanced DMA.
+ */
+#if !defined(STM32_UART_USART1_TX_DMA_STREAM) || defined(__DOXYGEN__)
+#define STM32_UART_USART1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7)
+#endif
+
+/**
+ * @brief DMA stream used for USART2 RX operations.
+ * @note This option is only available on platforms with enhanced DMA.
+ */
+#if !defined(STM32_UART_USART2_RX_DMA_STREAM) || defined(__DOXYGEN__)
+#define STM32_UART_USART2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5)
+#endif
+
+/**
+ * @brief DMA stream used for USART2 TX operations.
+ * @note This option is only available on platforms with enhanced DMA.
+ */
+#if !defined(STM32_UART_USART2_TX_DMA_STREAM) || defined(__DOXYGEN__)
+#define STM32_UART_USART2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6)
+#endif
+
+/**
+ * @brief DMA stream used for USART3 RX operations.
+ * @note This option is only available on platforms with enhanced DMA.
+ */
+#if !defined(STM32_UART_USART3_RX_DMA_STREAM) || defined(__DOXYGEN__)
+#define STM32_UART_USART3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 1)
+#endif
+
+/**
+ * @brief DMA stream used for USART3 TX operations.
+ * @note This option is only available on platforms with enhanced DMA.
+ */
+#if !defined(STM32_UART_USART3_TX_DMA_STREAM) || defined(__DOXYGEN__)
+#define STM32_UART_USART3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3)
+#endif
+
+/**
+ * @brief DMA stream used for UART4 RX operations.
+ * @note This option is only available on platforms with enhanced DMA.
+ */
+#if !defined(STM32_UART_UART4_RX_DMA_STREAM) || defined(__DOXYGEN__)
+#define STM32_UART_UART4_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2)
+#endif
+
+/**
+ * @brief DMA stream used for UART4 TX operations.
+ * @note This option is only available on platforms with enhanced DMA.
+ */
+#if !defined(STM32_UART_UART4_TX_DMA_STREAM) || defined(__DOXYGEN__)
+#define STM32_UART_UART4_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4)
+#endif
+
+/**
+ * @brief DMA stream used for UART5 RX operations.
+ * @note This option is only available on platforms with enhanced DMA.
+ */
+#if !defined(STM32_UART_UART5_RX_DMA_STREAM) || defined(__DOXYGEN__)
+#define STM32_UART_UART5_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0)
+#endif
+
+/**
+ * @brief DMA stream used for UART5 TX operations.
+ * @note This option is only available on platforms with enhanced DMA.
+ */
+#if !defined(STM32_UART_UART5_TX_DMA_STREAM) || defined(__DOXYGEN__)
+#define STM32_UART_UART5_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7)
+#endif
+
+/**
+ * @brief DMA stream used for USART6 RX operations.
+ * @note This option is only available on platforms with enhanced DMA.
+ */
+#if !defined(STM32_UART_USART6_RX_DMA_STREAM) || defined(__DOXYGEN__)
+#define STM32_UART_USART6_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 2)
+#endif
+
+/**
+ * @brief DMA stream used for USART6 TX operations.
+ * @note This option is only available on platforms with enhanced DMA.
+ */
+#if !defined(STM32_UART_USART6_TX_DMA_STREAM) || defined(__DOXYGEN__)
+#define STM32_UART_USART6_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7)
+#endif
+
+#else /* !STM32_ADVANCED_DMA */
+
+/* Fixed streams for platforms using the old DMA peripheral, the values are
+ valid for both STM32F1xx and STM32L1xx.*/
+#define STM32_UART_USART1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5)
+#define STM32_UART_USART1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4)
+#define STM32_UART_USART2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6)
+#define STM32_UART_USART2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7)
+#define STM32_UART_USART3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3)
+#define STM32_UART_USART3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2)
+#define STM32_UART_UART4_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 3)
+#define STM32_UART_UART4_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 5)
+
+#endif /* !STM32_ADVANCED_DMA*/
+/** @} */
+
+/*===========================================================================*/
+/* Derived constants and error checks. */
+/*===========================================================================*/
+
+#if STM32_UART_USE_USART1 && !STM32_HAS_USART1
+#error "USART1 not present in the selected device"
+#endif
+
+#if STM32_UART_USE_USART2 && !STM32_HAS_USART2
+#error "USART2 not present in the selected device"
+#endif
+
+#if STM32_UART_USE_USART3 && !STM32_HAS_USART3
+#error "USART3 not present in the selected device"
+#endif
+
+#if STM32_UART_USE_UART4
+ #if !STM32_HAS_UART4
+ #error "UART4 not present in the selected device"
+ #endif
+
+ #if !defined(STM32F4XX) || !defined(STM32F4XX)
+ #error "UART4 DMA access not supported in this platform"
+ #endif
+#endif
+
+#if STM32_UART_USE_UART5
+ #if !STM32_HAS_UART5
+ #error "UART5 not present in the selected device"
+ #endif
+
+ #if !defined(STM32F4XX) || !defined(STM32F4XX)
+ #error "UART5 DMA access not supported in this platform"
+ #endif
+#endif
+
+#if STM32_UART_USE_USART6 && !STM32_HAS_USART6
+#error "USART6 not present in the selected device"
+#endif
+
+#if !STM32_UART_USE_USART1 && !STM32_UART_USE_USART2 && \
+ !STM32_UART_USE_USART3 && !STM32_UART_USE_UART4 && \
+ !STM32_UART_USE_UART5 && !STM32_UART_USE_USART6
+#error "UART driver activated but no USART/UART peripheral assigned"
+#endif
+
+#if STM32_UART_USE_USART1 && \
+ !CORTEX_IS_VALID_KERNEL_PRIORITY(STM32_UART_USART1_IRQ_PRIORITY)
+#error "Invalid IRQ priority assigned to USART1"
+#endif
+
+#if STM32_UART_USE_USART2 && \
+ !CORTEX_IS_VALID_KERNEL_PRIORITY(STM32_UART_USART2_IRQ_PRIORITY)
+#error "Invalid IRQ priority assigned to USART2"
+#endif
+
+#if STM32_UART_USE_USART3 && \
+ !CORTEX_IS_VALID_KERNEL_PRIORITY(STM32_UART_USART3_IRQ_PRIORITY)
+#error "Invalid IRQ priority assigned to USART3"
+#endif
+
+#if STM32_UART_USE_UART4 && \
+ !CORTEX_IS_VALID_KERNEL_PRIORITY(STM32_UART_UART4_IRQ_PRIORITY)
+#error "Invalid IRQ priority assigned to UART4"
+#endif
+
+#if STM32_UART_USE_UART5 && \
+ !CORTEX_IS_VALID_KERNEL_PRIORITY(STM32_UART_UART5_IRQ_PRIORITY)
+#error "Invalid IRQ priority assigned to UART5"
+#endif
+
+#if STM32_UART_USE_USART6 && \
+ !CORTEX_IS_VALID_KERNEL_PRIORITY(STM32_UART_USART6_IRQ_PRIORITY)
+#error "Invalid IRQ priority assigned to USART6"
+#endif
+
+#if STM32_UART_USE_USART1 && \
+ !STM32_DMA_IS_VALID_PRIORITY(STM32_UART_USART1_DMA_PRIORITY)
+#error "Invalid DMA priority assigned to USART1"
+#endif
+
+#if STM32_UART_USE_USART2 && \
+ !STM32_DMA_IS_VALID_PRIORITY(STM32_UART_USART2_DMA_PRIORITY)
+#error "Invalid DMA priority assigned to USART2"
+#endif
+
+#if STM32_UART_USE_USART3 && \
+ !STM32_DMA_IS_VALID_PRIORITY(STM32_UART_USART3_DMA_PRIORITY)
+#error "Invalid DMA priority assigned to USART3"
+#endif
+
+#if STM32_UART_USE_UART4 && \
+ !STM32_DMA_IS_VALID_PRIORITY(STM32_UART_UART4_DMA_PRIORITY)
+#error "Invalid DMA priority assigned to UART4"
+#endif
+
+#if STM32_UART_USE_UART5 && \
+ !STM32_DMA_IS_VALID_PRIORITY(STM32_UART_UART5_DMA_PRIORITY)
+#error "Invalid DMA priority assigned to UART5"
+#endif
+
+#if STM32_UART_USE_USART6 && \
+ !STM32_DMA_IS_VALID_PRIORITY(STM32_UART_USART6_DMA_PRIORITY)
+#error "Invalid DMA priority assigned to USART6"
+#endif
+
+#if STM32_UART_USE_USART1 && \
+ !STM32_DMA_IS_VALID_ID(STM32_UART_USART1_RX_DMA_STREAM, \
+ STM32_USART1_RX_DMA_MSK)
+#error "invalid DMA stream associated to USART1 RX"
+#endif
+
+#if STM32_UART_USE_USART1 && \
+ !STM32_DMA_IS_VALID_ID(STM32_UART_USART1_TX_DMA_STREAM, \
+ STM32_USART1_TX_DMA_MSK)
+#error "invalid DMA stream associated to USART1 TX"
+#endif
+
+#if STM32_UART_USE_USART2 && \
+ !STM32_DMA_IS_VALID_ID(STM32_UART_USART2_RX_DMA_STREAM, \
+ STM32_USART2_RX_DMA_MSK)
+#error "invalid DMA stream associated to USART2 RX"
+#endif
+
+#if STM32_UART_USE_USART2 && \
+ !STM32_DMA_IS_VALID_ID(STM32_UART_USART2_TX_DMA_STREAM, \
+ STM32_USART2_TX_DMA_MSK)
+#error "invalid DMA stream associated to USART2 TX"
+#endif
+
+#if STM32_UART_USE_USART3 && \
+ !STM32_DMA_IS_VALID_ID(STM32_UART_USART3_RX_DMA_STREAM, \
+ STM32_USART3_RX_DMA_MSK)
+#error "invalid DMA stream associated to USART3 RX"
+#endif
+
+#if STM32_UART_USE_USART3 && \
+ !STM32_DMA_IS_VALID_ID(STM32_UART_USART3_TX_DMA_STREAM, \
+ STM32_USART3_TX_DMA_MSK)
+#error "invalid DMA stream associated to USART3 TX"
+#endif
+
+#if STM32_UART_USE_UART4 && \
+ !STM32_DMA_IS_VALID_ID(STM32_UART_UART4_RX_DMA_STREAM, \
+ STM32_UART4_RX_DMA_MSK)
+#error "invalid DMA stream associated to UART4 RX"
+#endif
+
+#if STM32_UART_USE_UART4 && \
+ !STM32_DMA_IS_VALID_ID(STM32_UART_UART4_TX_DMA_STREAM, \
+ STM32_UART4_TX_DMA_MSK)
+#error "invalid DMA stream associated to UART4 TX"
+#endif
+
+#if STM32_UART_USE_UART5 && \
+ !STM32_DMA_IS_VALID_ID(STM32_UART_UART5_RX_DMA_STREAM, \
+ STM32_UART5_RX_DMA_MSK)
+#error "invalid DMA stream associated to UART5 RX"
+#endif
+
+#if STM32_UART_USE_UART5 && \
+ !STM32_DMA_IS_VALID_ID(STM32_UART_UART5_TX_DMA_STREAM, \
+ STM32_UART5_TX_DMA_MSK)
+#error "invalid DMA stream associated to UART5 TX"
+#endif
+
+#if STM32_UART_USE_USART6 && \
+ !STM32_DMA_IS_VALID_ID(STM32_UART_USART6_RX_DMA_STREAM, \
+ STM32_USART6_RX_DMA_MSK)
+#error "invalid DMA stream associated to USART6 RX"
+#endif
+
+#if STM32_UART_USE_USART6 && \
+ !STM32_DMA_IS_VALID_ID(STM32_UART_USART6_TX_DMA_STREAM, \
+ STM32_USART6_TX_DMA_MSK)
+#error "invalid DMA stream associated to USART6 TX"
+#endif
+
+#if !defined(STM32_DMA_REQUIRED)
+#define STM32_DMA_REQUIRED
+#endif
+
+/*===========================================================================*/
+/* Driver data structures and types. */
+/*===========================================================================*/
+
+/**
+ * @brief UART driver condition flags type.
+ */
+typedef uint32_t uartflags_t;
+
+/**
+ * @brief Structure representing an UART driver.
+ */
+typedef struct UARTDriver UARTDriver;
+
+/**
+ * @brief Generic UART notification callback type.
+ *
+ * @param[in] uartp pointer to the @p UARTDriver object
+ */
+typedef void (*uartcb_t)(UARTDriver *uartp);
+
+/**
+ * @brief Character received UART notification callback type.
+ *
+ * @param[in] uartp pointer to the @p UARTDriver object
+ * @param[in] c received character
+ */
+typedef void (*uartccb_t)(UARTDriver *uartp, uint16_t c);
+
+/**
+ * @brief Receive error UART notification callback type.
+ *
+ * @param[in] uartp pointer to the @p UARTDriver object
+ * @param[in] e receive error mask
+ */
+typedef void (*uartecb_t)(UARTDriver *uartp, uartflags_t e);
+
+/**
+ * @brief Driver configuration structure.
+ * @note It could be empty on some architectures.
+ */
+typedef struct {
+ /**
+ * @brief End of transmission buffer callback.
+ */
+ uartcb_t txend1_cb;
+ /**
+ * @brief Physical end of transmission callback.
+ */
+ uartcb_t txend2_cb;
+ /**
+ * @brief Receive buffer filled callback.
+ */
+ uartcb_t rxend_cb;
+ /**
+ * @brief Character received while out if the @p UART_RECEIVE state.
+ */
+ uartccb_t rxchar_cb;
+ /**
+ * @brief Receive error callback.
+ */
+ uartecb_t rxerr_cb;
+ /* End of the mandatory fields.*/
+ /**
+ * @brief Bit rate.
+ */
+ uint32_t speed;
+ /**
+ * @brief Initialization value for the CR1 register.
+ */
+ uint16_t cr1;
+ /**
+ * @brief Initialization value for the CR2 register.
+ */
+ uint16_t cr2;
+ /**
+ * @brief Initialization value for the CR3 register.
+ */
+ uint16_t cr3;
+} UARTConfig;
+
+/**
+ * @brief Structure representing an UART driver.
+ */
+struct UARTDriver {
+ /**
+ * @brief Driver state.
+ */
+ uartstate_t state;
+ /**
+ * @brief Transmitter state.
+ */
+ uarttxstate_t txstate;
+ /**
+ * @brief Receiver state.
+ */
+ uartrxstate_t rxstate;
+ /**
+ * @brief Current configuration data.
+ */
+ const UARTConfig *config;
+#if defined(UART_DRIVER_EXT_FIELDS)
+ UART_DRIVER_EXT_FIELDS
+#endif
+ /* End of the mandatory fields.*/
+ /**
+ * @brief Pointer to the USART registers block.
+ */
+ USART_TypeDef *usart;
+ /**
+ * @brief DMA mode bit mask.
+ */
+ uint32_t dmamode;
+ /**
+ * @brief Receive DMA channel.
+ */
+ const stm32_dma_stream_t *dmarx;
+ /**
+ * @brief Transmit DMA channel.
+ */
+ const stm32_dma_stream_t *dmatx;
+ /**
+ * @brief Default receive buffer while into @p UART_RX_IDLE state.
+ */
+ volatile uint16_t rxbuf;
+};
+
+/*===========================================================================*/
+/* Driver macros. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* External declarations. */
+/*===========================================================================*/
+
+#if STM32_UART_USE_USART1 && !defined(__DOXYGEN__)
+extern UARTDriver UARTD1;
+#endif
+
+#if STM32_UART_USE_USART2 && !defined(__DOXYGEN__)
+extern UARTDriver UARTD2;
+#endif
+
+#if STM32_UART_USE_USART3 && !defined(__DOXYGEN__)
+extern UARTDriver UARTD3;
+#endif
+
+#if STM32_UART_USE_UART4 && !defined(__DOXYGEN__)
+extern UARTDriver UARTD4;
+#endif
+
+#if STM32_UART_USE_UART5 && !defined(__DOXYGEN__)
+extern UARTDriver UARTD5;
+#endif
+
+#if STM32_UART_USE_USART6 && !defined(__DOXYGEN__)
+extern UARTDriver UARTD6;
+#endif
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+ void uart_lld_init(void);
+ void uart_lld_start(UARTDriver *uartp);
+ void uart_lld_stop(UARTDriver *uartp);
+ void uart_lld_start_send(UARTDriver *uartp, size_t n, const void *txbuf);
+ size_t uart_lld_stop_send(UARTDriver *uartp);
+ void uart_lld_start_receive(UARTDriver *uartp, size_t n, void *rxbuf);
+ size_t uart_lld_stop_receive(UARTDriver *uartp);
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* HAL_USE_UART */
+
+#endif /* _UART_LLD_H_ */
+
+/** @} */
diff --git a/os/hal/platforms/STM32/USARTv2/serial_lld.c b/os/hal/platforms/STM32/USARTv2/serial_lld.c new file mode 100644 index 000000000..9e640c86e --- /dev/null +++ b/os/hal/platforms/STM32/USARTv2/serial_lld.c @@ -0,0 +1,522 @@ +/*
+ ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+/**
+ * @file STM32/USARTv2/serial_lld.c
+ * @brief STM32 low level serial driver code.
+ *
+ * @addtogroup SERIAL
+ * @{
+ */
+
+#include "hal.h"
+
+#if HAL_USE_SERIAL || defined(__DOXYGEN__)
+
+/*===========================================================================*/
+/* Driver local definitions. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver exported variables. */
+/*===========================================================================*/
+
+/** @brief USART1 serial driver identifier.*/
+#if STM32_SERIAL_USE_USART1 || defined(__DOXYGEN__)
+SerialDriver SD1;
+#endif
+
+/** @brief USART2 serial driver identifier.*/
+#if STM32_SERIAL_USE_USART2 || defined(__DOXYGEN__)
+SerialDriver SD2;
+#endif
+
+/** @brief USART3 serial driver identifier.*/
+#if STM32_SERIAL_USE_USART3 || defined(__DOXYGEN__)
+SerialDriver SD3;
+#endif
+
+/** @brief UART4 serial driver identifier.*/
+#if STM32_SERIAL_USE_UART4 || defined(__DOXYGEN__)
+SerialDriver SD4;
+#endif
+
+/** @brief UART5 serial driver identifier.*/
+#if STM32_SERIAL_USE_UART5 || defined(__DOXYGEN__)
+SerialDriver SD5;
+#endif
+
+/** @brief USART6 serial driver identifier.*/
+#if STM32_SERIAL_USE_USART6 || defined(__DOXYGEN__)
+SerialDriver SD6;
+#endif
+
+/*===========================================================================*/
+/* Driver local variables and types. */
+/*===========================================================================*/
+
+/** @brief Driver default configuration.*/
+static const SerialConfig default_config =
+{
+ SERIAL_DEFAULT_BITRATE,
+ 0,
+ USART_CR2_STOP1_BITS | USART_CR2_LINEN,
+ 0
+};
+
+/*===========================================================================*/
+/* Driver local functions. */
+/*===========================================================================*/
+
+/**
+ * @brief USART initialization.
+ * @details This function must be invoked with interrupts disabled.
+ *
+ * @param[in] sdp pointer to a @p SerialDriver object
+ * @param[in] config the architecture-dependent serial driver configuration
+ */
+static void usart_init(SerialDriver *sdp, const SerialConfig *config) {
+ USART_TypeDef *u = sdp->usart;
+
+ /* Baud rate setting.*/
+ u->BRR = (uint16_t)(sdp->clock / config->speed);
+
+ /* Note that some bits are enforced.*/
+ u->CR2 = config->cr2 | USART_CR2_LBDIE;
+ u->CR3 = config->cr3 | USART_CR3_EIE;
+ u->CR1 = config->cr1 | USART_CR1_UE | USART_CR1_PEIE |
+ USART_CR1_RXNEIE | USART_CR1_TE |
+ USART_CR1_RE;
+ u->ICR = 0xFFFFFFFF;
+}
+
+/**
+ * @brief USART de-initialization.
+ * @details This function must be invoked with interrupts disabled.
+ *
+ * @param[in] u pointer to an USART I/O block
+ */
+static void usart_deinit(USART_TypeDef *u) {
+
+ u->CR1 = 0;
+ u->CR2 = 0;
+ u->CR3 = 0;
+}
+
+/**
+ * @brief Error handling routine.
+ *
+ * @param[in] sdp pointer to a @p SerialDriver object
+ * @param[in] isr USART ISR register value
+ */
+static void set_error(SerialDriver *sdp, uint32_t isr) {
+ eventflags_t sts = 0;
+
+ if (isr & USART_ISR_ORE)
+ sts |= SD_OVERRUN_ERROR;
+ if (isr & USART_ISR_PE)
+ sts |= SD_PARITY_ERROR;
+ if (isr & USART_ISR_FE)
+ sts |= SD_FRAMING_ERROR;
+ if (isr & USART_ISR_NE)
+ sts |= SD_NOISE_ERROR;
+ osalSysLockFromISR();
+ chnAddFlagsI(sdp, sts);
+ osalSysUnlockFromISR();
+}
+
+/**
+ * @brief Common IRQ handler.
+ *
+ * @param[in] sdp communication channel associated to the USART
+ */
+static void serve_interrupt(SerialDriver *sdp) {
+ USART_TypeDef *u = sdp->usart;
+ uint32_t cr1 = u->CR1;
+ uint32_t isr;
+
+ /* Reading and clearing status.*/
+ isr = u->ISR;
+ u->ICR = isr;
+
+ /* Error condition detection.*/
+ if (isr & (USART_ISR_ORE | USART_ISR_NE | USART_ISR_FE | USART_ISR_PE))
+ set_error(sdp, isr);
+ /* Special case, LIN break detection.*/
+ if (isr & USART_ISR_LBD) {
+ osalSysLockFromISR();
+ chnAddFlagsI(sdp, SD_BREAK_DETECTED);
+ osalSysUnlockFromISR();
+ }
+ /* Data available.*/
+ if (isr & USART_ISR_RXNE) {
+ osalSysLockFromISR();
+ sdIncomingDataI(sdp, (uint8_t)u->RDR);
+ osalSysUnlockFromISR();
+ }
+ /* Transmission buffer empty.*/
+ if ((cr1 & USART_CR1_TXEIE) && (isr & USART_ISR_TXE)) {
+ msg_t b;
+ osalSysLockFromISR();
+ b = oqGetI(&sdp->oqueue);
+ if (b < Q_OK) {
+ chnAddFlagsI(sdp, CHN_OUTPUT_EMPTY);
+ u->CR1 = (cr1 & ~USART_CR1_TXEIE) | USART_CR1_TCIE;
+ }
+ else
+ u->TDR = b;
+ osalSysUnlockFromISR();
+ }
+ /* Physical transmission end.*/
+ if (isr & USART_ISR_TC) {
+ osalSysLockFromISR();
+ chnAddFlagsI(sdp, CHN_TRANSMISSION_END);
+ osalSysUnlockFromISR();
+ u->CR1 = cr1 & ~USART_CR1_TCIE;
+ }
+}
+
+#if STM32_SERIAL_USE_USART1 || defined(__DOXYGEN__)
+static void notify1(GenericQueue *qp) {
+
+ (void)qp;
+ USART1->CR1 |= USART_CR1_TXEIE;
+}
+#endif
+
+#if STM32_SERIAL_USE_USART2 || defined(__DOXYGEN__)
+static void notify2(GenericQueue *qp) {
+
+ (void)qp;
+ USART2->CR1 |= USART_CR1_TXEIE;
+}
+#endif
+
+#if STM32_SERIAL_USE_USART3 || defined(__DOXYGEN__)
+static void notify3(GenericQueue *qp) {
+
+ (void)qp;
+ USART3->CR1 |= USART_CR1_TXEIE;
+}
+#endif
+
+#if STM32_SERIAL_USE_UART4 || defined(__DOXYGEN__)
+static void notify4(GenericQueue *qp) {
+
+ (void)qp;
+ UART4->CR1 |= USART_CR1_TXEIE;
+}
+#endif
+
+#if STM32_SERIAL_USE_UART5 || defined(__DOXYGEN__)
+static void notify5(GenericQueue *qp) {
+
+ (void)qp;
+ UART5->CR1 |= USART_CR1_TXEIE;
+}
+#endif
+
+#if STM32_SERIAL_USE_USART6 || defined(__DOXYGEN__)
+static void notify6(GenericQueue *qp) {
+
+ (void)qp;
+ USART6->CR1 |= USART_CR1_TXEIE;
+}
+#endif
+
+/*===========================================================================*/
+/* Driver interrupt handlers. */
+/*===========================================================================*/
+
+#if STM32_SERIAL_USE_USART1 || defined(__DOXYGEN__)
+#if !defined(STM32_USART1_HANDLER)
+#error "STM32_USART1_HANDLER not defined"
+#endif
+/**
+ * @brief USART1 interrupt handler.
+ *
+ * @isr
+ */
+OSAL_IRQ_HANDLER(STM32_USART1_HANDLER) {
+
+ OSAL_IRQ_PROLOGUE();
+
+ serve_interrupt(&SD1);
+
+ OSAL_IRQ_EPILOGUE();
+}
+#endif
+
+#if STM32_SERIAL_USE_USART2 || defined(__DOXYGEN__)
+#if !defined(STM32_USART2_HANDLER)
+#error "STM32_USART2_HANDLER not defined"
+#endif
+/**
+ * @brief USART2 interrupt handler.
+ *
+ * @isr
+ */
+OSAL_IRQ_HANDLER(STM32_USART2_HANDLER) {
+
+ OSAL_IRQ_PROLOGUE();
+
+ serve_interrupt(&SD2);
+
+ OSAL_IRQ_EPILOGUE();
+}
+#endif
+
+#if STM32_SERIAL_USE_USART3 || defined(__DOXYGEN__)
+#if !defined(STM32_USART3_HANDLER)
+#error "STM32_USART3_HANDLER not defined"
+#endif
+/**
+ * @brief USART3 interrupt handler.
+ *
+ * @isr
+ */
+OSAL_IRQ_HANDLER(STM32_USART3_HANDLER) {
+
+ OSAL_IRQ_PROLOGUE();
+
+ serve_interrupt(&SD3);
+
+ OSAL_IRQ_EPILOGUE();
+}
+#endif
+
+#if STM32_SERIAL_USE_UART4 || defined(__DOXYGEN__)
+#if !defined(STM32_UART4_HANDLER)
+#error "STM32_UART4_HANDLER not defined"
+#endif
+/**
+ * @brief UART4 interrupt handler.
+ *
+ * @isr
+ */
+OSAL_IRQ_HANDLER(STM32_UART4_HANDLER) {
+
+ OSAL_IRQ_PROLOGUE();
+
+ serve_interrupt(&SD4);
+
+ OSAL_IRQ_EPILOGUE();
+}
+#endif
+
+#if STM32_SERIAL_USE_UART5 || defined(__DOXYGEN__)
+#if !defined(STM32_UART5_HANDLER)
+#error "STM32_UART5_HANDLER not defined"
+#endif
+/**
+ * @brief UART5 interrupt handler.
+ *
+ * @isr
+ */
+OSAL_IRQ_HANDLER(STM32_UART5_HANDLER) {
+
+ OSAL_IRQ_PROLOGUE();
+
+ serve_interrupt(&SD5);
+
+ OSAL_IRQ_EPILOGUE();
+}
+#endif
+
+#if STM32_SERIAL_USE_USART6 || defined(__DOXYGEN__)
+#if !defined(STM32_USART6_HANDLER)
+#error "STM32_USART6_HANDLER not defined"
+#endif
+/**
+ * @brief USART1 interrupt handler.
+ *
+ * @isr
+ */
+OSAL_IRQ_HANDLER(STM32_USART6_HANDLER) {
+
+ OSAL_IRQ_PROLOGUE();
+
+ serve_interrupt(&SD6);
+
+ OSAL_IRQ_EPILOGUE();
+}
+#endif
+
+/*===========================================================================*/
+/* Driver exported functions. */
+/*===========================================================================*/
+
+/**
+ * @brief Low level serial driver initialization.
+ *
+ * @notapi
+ */
+void sd_lld_init(void) {
+
+#if STM32_SERIAL_USE_USART1
+ sdObjectInit(&SD1, NULL, notify1);
+ SD1.usart = USART1;
+ SD1.clock = STM32_USART1CLK;
+#endif
+
+#if STM32_SERIAL_USE_USART2
+ sdObjectInit(&SD2, NULL, notify2);
+ SD2.usart = USART2;
+ SD2.clock = STM32_USART2CLK;
+#endif
+
+#if STM32_SERIAL_USE_USART3
+ sdObjectInit(&SD3, NULL, notify3);
+ SD3.usart = USART3;
+ SD3.clock = STM32_USART3CLK;
+#endif
+
+#if STM32_SERIAL_USE_UART4
+ sdObjectInit(&SD4, NULL, notify4);
+ SD4.usart = UART4;
+ SD4.clock = STM32_UART4CLK;
+#endif
+
+#if STM32_SERIAL_USE_UART5
+ sdObjectInit(&SD5, NULL, notify5);
+ SD5.usart = UART5;
+ SD5.clock = STM32_UART5CLK;
+#endif
+
+#if STM32_SERIAL_USE_USART6
+ sdObjectInit(&SD6, NULL, notify6);
+ SD6.usart = USART6;
+ SD6.clock = STM32_USART6CLK;
+#endif
+}
+
+/**
+ * @brief Low level serial driver configuration and (re)start.
+ *
+ * @param[in] sdp pointer to a @p SerialDriver object
+ * @param[in] config the architecture-dependent serial driver configuration.
+ * If this parameter is set to @p NULL then a default
+ * configuration is used.
+ *
+ * @notapi
+ */
+void sd_lld_start(SerialDriver *sdp, const SerialConfig *config) {
+
+ if (config == NULL)
+ config = &default_config;
+
+ if (sdp->state == SD_STOP) {
+#if STM32_SERIAL_USE_USART1
+ if (&SD1 == sdp) {
+ rccEnableUSART1(FALSE);
+ nvicEnableVector(STM32_USART1_NUMBER, STM32_SERIAL_USART1_PRIORITY);
+ }
+#endif
+#if STM32_SERIAL_USE_USART2
+ if (&SD2 == sdp) {
+ rccEnableUSART2(FALSE);
+ nvicEnableVector(STM32_USART2_NUMBER, STM32_SERIAL_USART2_PRIORITY);
+ }
+#endif
+#if STM32_SERIAL_USE_USART3
+ if (&SD3 == sdp) {
+ rccEnableUSART3(FALSE);
+ nvicEnableVector(STM32_USART3_NUMBER, STM32_SERIAL_USART3_PRIORITY);
+ }
+#endif
+#if STM32_SERIAL_USE_UART4
+ if (&SD4 == sdp) {
+ rccEnableUART4(FALSE);
+ nvicEnableVector(STM32_UART4_NUMBER, STM32_SERIAL_UART4_PRIORITY);
+ }
+#endif
+#if STM32_SERIAL_USE_UART5
+ if (&SD5 == sdp) {
+ rccEnableUART5(FALSE);
+ nvicEnableVector(STM32_UART5_NUMBER, STM32_SERIAL_UART5_PRIORITY);
+ }
+#endif
+#if STM32_SERIAL_USE_USART6
+ if (&SD6 == sdp) {
+ rccEnableUSART6(FALSE);
+ nvicEnableVector(STM32_USART6_NUMBER, STM32_SERIAL_USART6_PRIORITY);
+ }
+#endif
+ }
+ usart_init(sdp, config);
+}
+
+/**
+ * @brief Low level serial driver stop.
+ * @details De-initializes the USART, stops the associated clock, resets the
+ * interrupt vector.
+ *
+ * @param[in] sdp pointer to a @p SerialDriver object
+ *
+ * @notapi
+ */
+void sd_lld_stop(SerialDriver *sdp) {
+
+ if (sdp->state == SD_READY) {
+ usart_deinit(sdp->usart);
+#if STM32_SERIAL_USE_USART1
+ if (&SD1 == sdp) {
+ rccDisableUSART1(FALSE);
+ nvicDisableVector(STM32_USART1_NUMBER);
+ return;
+ }
+#endif
+#if STM32_SERIAL_USE_USART2
+ if (&SD2 == sdp) {
+ rccDisableUSART2(FALSE);
+ nvicDisableVector(STM32_USART2_NUMBER);
+ return;
+ }
+#endif
+#if STM32_SERIAL_USE_USART3
+ if (&SD3 == sdp) {
+ rccDisableUSART3(FALSE);
+ nvicDisableVector(STM32_USART3_NUMBER);
+ return;
+ }
+#endif
+#if STM32_SERIAL_USE_UART4
+ if (&SD4 == sdp) {
+ rccDisableUART4(FALSE);
+ nvicDisableVector(STM32_UART4_NUMBER);
+ return;
+ }
+#endif
+#if STM32_SERIAL_USE_UART5
+ if (&SD5 == sdp) {
+ rccDisableUART5(FALSE);
+ nvicDisableVector(STM32_UART5_NUMBER);
+ return;
+ }
+#endif
+#if STM32_SERIAL_USE_USART6
+ if (&SD6 == sdp) {
+ rccDisableUSART6(FALSE);
+ nvicDisableVector(STM32_USART6_NUMBER);
+ return;
+ }
+#endif
+ }
+}
+
+#endif /* HAL_USE_SERIAL */
+
+/** @} */
diff --git a/os/hal/platforms/STM32/USARTv2/serial_lld.h b/os/hal/platforms/STM32/USARTv2/serial_lld.h new file mode 100644 index 000000000..743cb0b50 --- /dev/null +++ b/os/hal/platforms/STM32/USARTv2/serial_lld.h @@ -0,0 +1,305 @@ +/*
+ ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+/**
+ * @file STM32/USARTv2/serial_lld.h
+ * @brief STM32 low level serial driver header.
+ *
+ * @addtogroup SERIAL
+ * @{
+ */
+
+#ifndef _SERIAL_LLD_H_
+#define _SERIAL_LLD_H_
+
+#if HAL_USE_SERIAL || defined(__DOXYGEN__)
+
+/*===========================================================================*/
+/* Driver constants. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver pre-compile time settings. */
+/*===========================================================================*/
+
+/**
+ * @name Configuration options
+ * @{
+ */
+/**
+ * @brief USART1 driver enable switch.
+ * @details If set to @p TRUE the support for USART1 is included.
+ * @note The default is @p TRUE.
+ */
+#if !defined(STM32_SERIAL_USE_USART1) || defined(__DOXYGEN__)
+#define STM32_SERIAL_USE_USART1 FALSE
+#endif
+
+/**
+ * @brief USART2 driver enable switch.
+ * @details If set to @p TRUE the support for USART2 is included.
+ * @note The default is @p TRUE.
+ */
+#if !defined(STM32_SERIAL_USE_USART2) || defined(__DOXYGEN__)
+#define STM32_SERIAL_USE_USART2 FALSE
+#endif
+
+/**
+ * @brief USART3 driver enable switch.
+ * @details If set to @p TRUE the support for USART3 is included.
+ * @note The default is @p TRUE.
+ */
+#if !defined(STM32_SERIAL_USE_USART3) || defined(__DOXYGEN__)
+#define STM32_SERIAL_USE_USART3 FALSE
+#endif
+
+/**
+ * @brief UART4 driver enable switch.
+ * @details If set to @p TRUE the support for UART4 is included.
+ * @note The default is @p TRUE.
+ */
+#if !defined(STM32_SERIAL_USE_UART4) || defined(__DOXYGEN__)
+#define STM32_SERIAL_USE_UART4 FALSE
+#endif
+
+/**
+ * @brief UART5 driver enable switch.
+ * @details If set to @p TRUE the support for UART5 is included.
+ * @note The default is @p TRUE.
+ */
+#if !defined(STM32_SERIAL_USE_UART5) || defined(__DOXYGEN__)
+#define STM32_SERIAL_USE_UART5 FALSE
+#endif
+
+/**
+ * @brief USART6 driver enable switch.
+ * @details If set to @p TRUE the support for USART6 is included.
+ * @note The default is @p TRUE.
+ */
+#if !defined(STM32_SERIAL_USE_USART6) || defined(__DOXYGEN__)
+#define STM32_SERIAL_USE_USART6 FALSE
+#endif
+
+/**
+ * @brief USART1 interrupt priority level setting.
+ */
+#if !defined(STM32_SERIAL_USART1_PRIORITY) || defined(__DOXYGEN__)
+#define STM32_SERIAL_USART1_PRIORITY 12
+#endif
+
+/**
+ * @brief USART2 interrupt priority level setting.
+ */
+#if !defined(STM32_SERIAL_USART2_PRIORITY) || defined(__DOXYGEN__)
+#define STM32_SERIAL_USART2_PRIORITY 12
+#endif
+
+/**
+ * @brief USART3 interrupt priority level setting.
+ */
+#if !defined(STM32_SERIAL_USART3_PRIORITY) || defined(__DOXYGEN__)
+#define STM32_SERIAL_USART3_PRIORITY 12
+#endif
+
+/**
+ * @brief UART4 interrupt priority level setting.
+ */
+#if !defined(STM32_SERIAL_UART4_PRIORITY) || defined(__DOXYGEN__)
+#define STM32_SERIAL_UART4_PRIORITY 12
+#endif
+
+/**
+ * @brief UART5 interrupt priority level setting.
+ */
+#if !defined(STM32_SERIAL_UART5_PRIORITY) || defined(__DOXYGEN__)
+#define STM32_SERIAL_UART5_PRIORITY 12
+#endif
+
+/**
+ * @brief USART6 interrupt priority level setting.
+ */
+#if !defined(STM32_SERIAL_USART6_PRIORITY) || defined(__DOXYGEN__)
+#define STM32_SERIAL_USART6_PRIORITY 12
+#endif
+/** @} */
+
+/*===========================================================================*/
+/* Derived constants and error checks. */
+/*===========================================================================*/
+
+#if STM32_SERIAL_USE_USART1 && !STM32_HAS_USART1
+#error "USART1 not present in the selected device"
+#endif
+
+#if STM32_SERIAL_USE_USART2 && !STM32_HAS_USART2
+#error "USART2 not present in the selected device"
+#endif
+
+#if STM32_SERIAL_USE_USART3 && !STM32_HAS_USART3
+#error "USART3 not present in the selected device"
+#endif
+
+#if STM32_SERIAL_USE_UART4 && !STM32_HAS_UART4
+#error "UART4 not present in the selected device"
+#endif
+
+#if STM32_SERIAL_USE_UART5 && !STM32_HAS_UART5
+#error "UART5 not present in the selected device"
+#endif
+
+#if STM32_SERIAL_USE_USART6 && !STM32_HAS_USART6
+#error "USART6 not present in the selected device"
+#endif
+
+#if !STM32_SERIAL_USE_USART1 && !STM32_SERIAL_USE_USART2 && \
+ !STM32_SERIAL_USE_USART3 && !STM32_SERIAL_USE_UART4 && \
+ !STM32_SERIAL_USE_UART5 && !STM32_SERIAL_USE_USART6
+#error "SERIAL driver activated but no USART/UART peripheral assigned"
+#endif
+
+#if STM32_SERIAL_USE_USART1 && \
+ !CORTEX_IS_VALID_KERNEL_PRIORITY(STM32_SERIAL_USART1_PRIORITY)
+#error "Invalid IRQ priority assigned to USART1"
+#endif
+
+#if STM32_SERIAL_USE_USART2 && \
+ !CORTEX_IS_VALID_KERNEL_PRIORITY(STM32_SERIAL_USART2_PRIORITY)
+#error "Invalid IRQ priority assigned to USART2"
+#endif
+
+#if STM32_SERIAL_USE_USART3 && \
+ !CORTEX_IS_VALID_KERNEL_PRIORITY(STM32_SERIAL_USART3_PRIORITY)
+#error "Invalid IRQ priority assigned to USART3"
+#endif
+
+#if STM32_SERIAL_USE_UART4 && \
+ !CORTEX_IS_VALID_KERNEL_PRIORITY(STM32_SERIAL_UART4_PRIORITY)
+#error "Invalid IRQ priority assigned to UART4"
+#endif
+
+#if STM32_SERIAL_USE_UART5 && \
+ !CORTEX_IS_VALID_KERNEL_PRIORITY(STM32_SERIAL_UART5_PRIORITY)
+#error "Invalid IRQ priority assigned to UART5"
+#endif
+
+#if STM32_SERIAL_USE_USART6 && \
+ !CORTEX_IS_VALID_KERNEL_PRIORITY(STM32_SERIAL_USART6_PRIORITY)
+#error "Invalid IRQ priority assigned to USART6"
+#endif
+
+/*===========================================================================*/
+/* Driver data structures and types. */
+/*===========================================================================*/
+
+/**
+ * @brief STM32 Serial Driver configuration structure.
+ * @details An instance of this structure must be passed to @p sdStart()
+ * in order to configure and start a serial driver operations.
+ * @note This structure content is architecture dependent, each driver
+ * implementation defines its own version and the custom static
+ * initializers.
+ */
+typedef struct {
+ /**
+ * @brief Bit rate.
+ */
+ uint32_t speed;
+ /* End of the mandatory fields.*/
+ /**
+ * @brief Initialization value for the CR1 register.
+ */
+ uint32_t cr1;
+ /**
+ * @brief Initialization value for the CR2 register.
+ */
+ uint32_t cr2;
+ /**
+ * @brief Initialization value for the CR3 register.
+ */
+ uint32_t cr3;
+} SerialConfig;
+
+/**
+ * @brief @p SerialDriver specific data.
+ */
+#define _serial_driver_data \
+ _base_asynchronous_channel_data \
+ /* Driver state.*/ \
+ sdstate_t state; \
+ /* Input queue.*/ \
+ InputQueue iqueue; \
+ /* Output queue.*/ \
+ OutputQueue oqueue; \
+ /* Input circular buffer.*/ \
+ uint8_t ib[SERIAL_BUFFERS_SIZE]; \
+ /* Output circular buffer.*/ \
+ uint8_t ob[SERIAL_BUFFERS_SIZE]; \
+ /* End of the mandatory fields.*/ \
+ /* Pointer to the USART registers block.*/ \
+ USART_TypeDef *usart; \
+ /* Clock frequency for the associated USART/UART.*/ \
+ uint32_t clock;
+
+/*===========================================================================*/
+/* Driver macros. */
+/*===========================================================================*/
+
+/*
+ * Extra USARTs definitions here (missing from the ST header file).
+ */
+#define USART_CR2_STOP1_BITS (0 << 12) /**< @brief CR2 1 stop bit value.*/
+#define USART_CR2_STOP0P5_BITS (1 << 12) /**< @brief CR2 0.5 stop bit value.*/
+#define USART_CR2_STOP2_BITS (2 << 12) /**< @brief CR2 2 stop bit value.*/
+#define USART_CR2_STOP1P5_BITS (3 << 12) /**< @brief CR2 1.5 stop bit value.*/
+
+/*===========================================================================*/
+/* External declarations. */
+/*===========================================================================*/
+
+#if STM32_SERIAL_USE_USART1 && !defined(__DOXYGEN__)
+extern SerialDriver SD1;
+#endif
+#if STM32_SERIAL_USE_USART2 && !defined(__DOXYGEN__)
+extern SerialDriver SD2;
+#endif
+#if STM32_SERIAL_USE_USART3 && !defined(__DOXYGEN__)
+extern SerialDriver SD3;
+#endif
+#if STM32_SERIAL_USE_UART4 && !defined(__DOXYGEN__)
+extern SerialDriver SD4;
+#endif
+#if STM32_SERIAL_USE_UART5 && !defined(__DOXYGEN__)
+extern SerialDriver SD5;
+#endif
+#if STM32_SERIAL_USE_USART6 && !defined(__DOXYGEN__)
+extern SerialDriver SD6;
+#endif
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+ void sd_lld_init(void);
+ void sd_lld_start(SerialDriver *sdp, const SerialConfig *config);
+ void sd_lld_stop(SerialDriver *sdp);
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* HAL_USE_SERIAL */
+
+#endif /* _SERIAL_LLD_H_ */
+
+/** @} */
diff --git a/os/hal/platforms/STM32/USARTv2/uart_lld.c b/os/hal/platforms/STM32/USARTv2/uart_lld.c new file mode 100644 index 000000000..740c2fd98 --- /dev/null +++ b/os/hal/platforms/STM32/USARTv2/uart_lld.c @@ -0,0 +1,594 @@ +/*
+ ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+/**
+ * @file STM32/USARTv2/uart_lld.c
+ * @brief STM32 low level UART driver code.
+ *
+ * @addtogroup UART
+ * @{
+ */
+
+#include "ch.h"
+#include "hal.h"
+
+#if HAL_USE_UART || defined(__DOXYGEN__)
+
+/*===========================================================================*/
+/* Driver local definitions. */
+/*===========================================================================*/
+
+#define USART1_RX_DMA_CHANNEL \
+ STM32_DMA_GETCHANNEL(STM32_UART_USART1_RX_DMA_STREAM, \
+ STM32_USART1_RX_DMA_CHN)
+
+#define USART1_TX_DMA_CHANNEL \
+ STM32_DMA_GETCHANNEL(STM32_UART_USART1_TX_DMA_STREAM, \
+ STM32_USART1_TX_DMA_CHN)
+
+#define USART2_RX_DMA_CHANNEL \
+ STM32_DMA_GETCHANNEL(STM32_UART_USART2_RX_DMA_STREAM, \
+ STM32_USART2_RX_DMA_CHN)
+
+#define USART2_TX_DMA_CHANNEL \
+ STM32_DMA_GETCHANNEL(STM32_UART_USART2_TX_DMA_STREAM, \
+ STM32_USART2_TX_DMA_CHN)
+
+#define USART3_RX_DMA_CHANNEL \
+ STM32_DMA_GETCHANNEL(STM32_UART_USART3_RX_DMA_STREAM, \
+ STM32_USART3_RX_DMA_CHN)
+
+#define USART3_TX_DMA_CHANNEL \
+ STM32_DMA_GETCHANNEL(STM32_UART_USART3_TX_DMA_STREAM, \
+ STM32_USART3_TX_DMA_CHN)
+
+/*===========================================================================*/
+/* Driver exported variables. */
+/*===========================================================================*/
+
+/** @brief USART1 UART driver identifier.*/
+#if STM32_UART_USE_USART1 || defined(__DOXYGEN__)
+UARTDriver UARTD1;
+#endif
+
+/** @brief USART2 UART driver identifier.*/
+#if STM32_UART_USE_USART2 || defined(__DOXYGEN__)
+UARTDriver UARTD2;
+#endif
+
+/** @brief USART3 UART driver identifier.*/
+#if STM32_UART_USE_USART3 || defined(__DOXYGEN__)
+UARTDriver UARTD3;
+#endif
+
+/*===========================================================================*/
+/* Driver local variables and types. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver local functions. */
+/*===========================================================================*/
+
+/**
+ * @brief Status bits translation.
+ *
+ * @param[in] sr USART SR register value
+ *
+ * @return The error flags.
+ */
+static uartflags_t translate_errors(uint32_t isr) {
+ uartflags_t sts = 0;
+
+ if (isr & USART_ISR_ORE)
+ sts |= UART_OVERRUN_ERROR;
+ if (isr & USART_ISR_PE)
+ sts |= UART_PARITY_ERROR;
+ if (isr & USART_ISR_FE)
+ sts |= UART_FRAMING_ERROR;
+ if (isr & USART_ISR_NE)
+ sts |= UART_NOISE_ERROR;
+ if (isr & USART_ISR_LBD)
+ sts |= UART_BREAK_DETECTED;
+ return sts;
+}
+
+/**
+ * @brief Puts the receiver in the UART_RX_IDLE state.
+ *
+ * @param[in] uartp pointer to the @p UARTDriver object
+ */
+static void set_rx_idle_loop(UARTDriver *uartp) {
+ uint32_t mode;
+
+ /* RX DMA channel preparation, if the char callback is defined then the
+ TCIE interrupt is enabled too.*/
+ if (uartp->config->rxchar_cb == NULL)
+ mode = STM32_DMA_CR_DIR_P2M | STM32_DMA_CR_CIRC;
+ else
+ mode = STM32_DMA_CR_DIR_P2M | STM32_DMA_CR_CIRC | STM32_DMA_CR_TCIE;
+ dmaStreamSetMemory0(uartp->dmarx, &uartp->rxbuf);
+ dmaStreamSetTransactionSize(uartp->dmarx, 1);
+ dmaStreamSetMode(uartp->dmarx, uartp->dmamode | mode);
+ dmaStreamEnable(uartp->dmarx);
+}
+
+/**
+ * @brief USART de-initialization.
+ * @details This function must be invoked with interrupts disabled.
+ *
+ * @param[in] uartp pointer to the @p UARTDriver object
+ */
+static void usart_stop(UARTDriver *uartp) {
+
+ /* Stops RX and TX DMA channels.*/
+ dmaStreamDisable(uartp->dmarx);
+ dmaStreamDisable(uartp->dmatx);
+
+ /* Stops USART operations.*/
+ uartp->usart->CR1 = 0;
+ uartp->usart->CR2 = 0;
+ uartp->usart->CR3 = 0;
+}
+
+/**
+ * @brief USART initialization.
+ * @details This function must be invoked with interrupts disabled.
+ *
+ * @param[in] uartp pointer to the @p UARTDriver object
+ */
+static void usart_start(UARTDriver *uartp) {
+ uint32_t cr1;
+ USART_TypeDef *u = uartp->usart;
+
+ /* Defensive programming, starting from a clean state.*/
+ usart_stop(uartp);
+
+ /* Baud rate setting.*/
+#if defined(STM32F0XX)
+ if (uartp->usart == USART1)
+ u->BRR = STM32_USART1CLK / uartp->config->speed;
+ else
+ u->BRR = STM32_PCLK / uartp->config->speed;
+#else /* !defined(STM32F0XX) */
+ if (uartp->usart == USART1)
+ u->BRR = STM32_PCLK2 / uartp->config->speed;
+ else
+ u->BRR = STM32_PCLK1 / uartp->config->speed;
+#endif /* !defined(STM32F0XX) */
+
+ /* Resetting eventual pending status flags.*/
+ u->ICR = 0xFFFFFFFF;
+
+ /* Note that some bits are enforced because required for correct driver
+ operations.*/
+ u->CR2 = uartp->config->cr2 | USART_CR2_LBDIE;
+ u->CR3 = uartp->config->cr3 | USART_CR3_DMAT | USART_CR3_DMAR |
+ USART_CR3_EIE;
+ if (uartp->config->txend2_cb == NULL)
+ cr1 = USART_CR1_UE | USART_CR1_PEIE | USART_CR1_TE | USART_CR1_RE;
+ else
+ cr1 = USART_CR1_UE | USART_CR1_PEIE | USART_CR1_TE | USART_CR1_RE |
+ USART_CR1_TCIE;
+ u->CR1 = uartp->config->cr1 | cr1;
+
+ /* Starting the receiver idle loop.*/
+ set_rx_idle_loop(uartp);
+}
+
+/**
+ * @brief RX DMA common service routine.
+ *
+ * @param[in] uartp pointer to the @p UARTDriver object
+ * @param[in] flags pre-shifted content of the ISR register
+ */
+static void uart_lld_serve_rx_end_irq(UARTDriver *uartp, uint32_t flags) {
+
+ /* DMA errors handling.*/
+#if defined(STM32_UART_DMA_ERROR_HOOK)
+ if ((flags & (STM32_DMA_ISR_TEIF | STM32_DMA_ISR_DMEIF)) != 0) {
+ STM32_UART_DMA_ERROR_HOOK(uartp);
+ }
+#else
+ (void)flags;
+#endif
+
+ if (uartp->rxstate == UART_RX_IDLE) {
+ /* Receiver in idle state, a callback is generated, if enabled, for each
+ received character and then the driver stays in the same state.*/
+ if (uartp->config->rxchar_cb != NULL)
+ uartp->config->rxchar_cb(uartp, uartp->rxbuf);
+ }
+ else {
+ /* Receiver in active state, a callback is generated, if enabled, after
+ a completed transfer.*/
+ dmaStreamDisable(uartp->dmarx);
+ uartp->rxstate = UART_RX_COMPLETE;
+ if (uartp->config->rxend_cb != NULL)
+ uartp->config->rxend_cb(uartp);
+
+ /* If the callback didn't explicitly change state then the receiver
+ automatically returns to the idle state.*/
+ if (uartp->rxstate == UART_RX_COMPLETE) {
+ uartp->rxstate = UART_RX_IDLE;
+ set_rx_idle_loop(uartp);
+ }
+ }
+}
+
+/**
+ * @brief TX DMA common service routine.
+ *
+ * @param[in] uartp pointer to the @p UARTDriver object
+ * @param[in] flags pre-shifted content of the ISR register
+ */
+static void uart_lld_serve_tx_end_irq(UARTDriver *uartp, uint32_t flags) {
+
+ /* DMA errors handling.*/
+#if defined(STM32_UART_DMA_ERROR_HOOK)
+ if ((flags & (STM32_DMA_ISR_TEIF | STM32_DMA_ISR_DMEIF)) != 0) {
+ STM32_UART_DMA_ERROR_HOOK(uartp);
+ }
+#else
+ (void)flags;
+#endif
+
+ dmaStreamDisable(uartp->dmatx);
+
+ /* A callback is generated, if enabled, after a completed transfer.*/
+ uartp->txstate = UART_TX_COMPLETE;
+ if (uartp->config->txend1_cb != NULL)
+ uartp->config->txend1_cb(uartp);
+
+ /* If the callback didn't explicitly change state then the transmitter
+ automatically returns to the idle state.*/
+ if (uartp->txstate == UART_TX_COMPLETE)
+ uartp->txstate = UART_TX_IDLE;
+}
+
+/**
+ * @brief USART common service routine.
+ *
+ * @param[in] uartp pointer to the @p UARTDriver object
+ */
+static void serve_usart_irq(UARTDriver *uartp) {
+ uint32_t isr;
+ USART_TypeDef *u = uartp->usart;
+
+ /* Reading and clearing status.*/
+ isr = u->ISR;
+ u->ICR = isr;
+
+ if (isr & (USART_ISR_LBD | USART_ISR_ORE | USART_ISR_NE |
+ USART_ISR_FE | USART_ISR_PE)) {
+ if (uartp->config->rxerr_cb != NULL)
+ uartp->config->rxerr_cb(uartp, translate_errors(isr));
+ }
+ if (isr & USART_ISR_TC) {
+ /* End of transmission, a callback is generated.*/
+ if (uartp->config->txend2_cb != NULL)
+ uartp->config->txend2_cb(uartp);
+ }
+}
+
+/*===========================================================================*/
+/* Driver interrupt handlers. */
+/*===========================================================================*/
+
+#if STM32_UART_USE_USART1 || defined(__DOXYGEN__)
+#if !defined(STM32_USART1_HANDLER)
+#error "STM32_USART1_HANDLER not defined"
+#endif
+/**
+ * @brief USART1 IRQ handler.
+ *
+ * @isr
+ */
+CH_IRQ_HANDLER(STM32_USART1_HANDLER) {
+
+ CH_IRQ_PROLOGUE();
+
+ serve_usart_irq(&UARTD1);
+
+ CH_IRQ_EPILOGUE();
+}
+#endif /* STM32_UART_USE_USART1 */
+
+#if STM32_UART_USE_USART2 || defined(__DOXYGEN__)
+#if !defined(STM32_USART2_HANDLER)
+#error "STM32_USART2_HANDLER not defined"
+#endif
+/**
+ * @brief USART2 IRQ handler.
+ *
+ * @isr
+ */
+CH_IRQ_HANDLER(STM32_USART2_HANDLER) {
+
+ CH_IRQ_PROLOGUE();
+
+ serve_usart_irq(&UARTD2);
+
+ CH_IRQ_EPILOGUE();
+}
+#endif /* STM32_UART_USE_USART2 */
+
+#if STM32_UART_USE_USART3 || defined(__DOXYGEN__)
+#if !defined(STM32_USART3_HANDLER)
+#error "STM32_USART3_HANDLER not defined"
+#endif
+/**
+ * @brief USART3 IRQ handler.
+ *
+ * @isr
+ */
+CH_IRQ_HANDLER(STM32_USART3_HANDLER) {
+
+ CH_IRQ_PROLOGUE();
+
+ serve_usart_irq(&UARTD3);
+
+ CH_IRQ_EPILOGUE();
+}
+#endif /* STM32_UART_USE_USART3 */
+
+/*===========================================================================*/
+/* Driver exported functions. */
+/*===========================================================================*/
+
+/**
+ * @brief Low level UART driver initialization.
+ *
+ * @notapi
+ */
+void uart_lld_init(void) {
+
+#if STM32_UART_USE_USART1
+ uartObjectInit(&UARTD1);
+ UARTD1.usart = USART1;
+ UARTD1.dmamode = STM32_DMA_CR_DMEIE | STM32_DMA_CR_TEIE;
+ UARTD1.dmarx = STM32_DMA_STREAM(STM32_UART_USART1_RX_DMA_STREAM);
+ UARTD1.dmatx = STM32_DMA_STREAM(STM32_UART_USART1_TX_DMA_STREAM);
+#endif
+
+#if STM32_UART_USE_USART2
+ uartObjectInit(&UARTD2);
+ UARTD2.usart = USART2;
+ UARTD2.dmamode = STM32_DMA_CR_DMEIE | STM32_DMA_CR_TEIE;
+ UARTD2.dmarx = STM32_DMA_STREAM(STM32_UART_USART2_RX_DMA_STREAM);
+ UARTD2.dmatx = STM32_DMA_STREAM(STM32_UART_USART2_TX_DMA_STREAM);
+#endif
+
+#if STM32_UART_USE_USART3
+ uartObjectInit(&UARTD3);
+ UARTD3.usart = USART3;
+ UARTD3.dmamode = STM32_DMA_CR_DMEIE | STM32_DMA_CR_TEIE;
+ UARTD3.dmarx = STM32_DMA_STREAM(STM32_UART_USART3_RX_DMA_STREAM);
+ UARTD3.dmatx = STM32_DMA_STREAM(STM32_UART_USART3_TX_DMA_STREAM);
+#endif
+}
+
+/**
+ * @brief Configures and activates the UART peripheral.
+ *
+ * @param[in] uartp pointer to the @p UARTDriver object
+ *
+ * @notapi
+ */
+void uart_lld_start(UARTDriver *uartp) {
+
+ if (uartp->state == UART_STOP) {
+#if STM32_UART_USE_USART1
+ if (&UARTD1 == uartp) {
+ bool_t b;
+ b = dmaStreamAllocate(uartp->dmarx,
+ STM32_UART_USART1_IRQ_PRIORITY,
+ (stm32_dmaisr_t)uart_lld_serve_rx_end_irq,
+ (void *)uartp);
+ chDbgAssert(!b, "uart_lld_start(), #1", "stream already allocated");
+ b = dmaStreamAllocate(uartp->dmatx,
+ STM32_UART_USART1_IRQ_PRIORITY,
+ (stm32_dmaisr_t)uart_lld_serve_tx_end_irq,
+ (void *)uartp);
+ chDbgAssert(!b, "uart_lld_start(), #2", "stream already allocated");
+ rccEnableUSART1(FALSE);
+ nvicEnableVector(STM32_USART1_NUMBER,
+ CORTEX_PRIORITY_MASK(STM32_UART_USART1_IRQ_PRIORITY));
+ uartp->dmamode |= STM32_DMA_CR_CHSEL(USART1_RX_DMA_CHANNEL) |
+ STM32_DMA_CR_PL(STM32_UART_USART1_DMA_PRIORITY);
+ }
+#endif
+
+#if STM32_UART_USE_USART2
+ if (&UARTD2 == uartp) {
+ bool_t b;
+ b = dmaStreamAllocate(uartp->dmarx,
+ STM32_UART_USART2_IRQ_PRIORITY,
+ (stm32_dmaisr_t)uart_lld_serve_rx_end_irq,
+ (void *)uartp);
+ chDbgAssert(!b, "uart_lld_start(), #3", "stream already allocated");
+ b = dmaStreamAllocate(uartp->dmatx,
+ STM32_UART_USART2_IRQ_PRIORITY,
+ (stm32_dmaisr_t)uart_lld_serve_tx_end_irq,
+ (void *)uartp);
+ chDbgAssert(!b, "uart_lld_start(), #4", "stream already allocated");
+ rccEnableUSART2(FALSE);
+ nvicEnableVector(STM32_USART2_NUMBER,
+ CORTEX_PRIORITY_MASK(STM32_UART_USART2_IRQ_PRIORITY));
+ uartp->dmamode |= STM32_DMA_CR_CHSEL(USART2_RX_DMA_CHANNEL) |
+ STM32_DMA_CR_PL(STM32_UART_USART2_DMA_PRIORITY);
+ }
+#endif
+
+#if STM32_UART_USE_USART3
+ if (&UARTD3 == uartp) {
+ bool_t b;
+ b = dmaStreamAllocate(uartp->dmarx,
+ STM32_UART_USART3_IRQ_PRIORITY,
+ (stm32_dmaisr_t)uart_lld_serve_rx_end_irq,
+ (void *)uartp);
+ chDbgAssert(!b, "uart_lld_start(), #5", "stream already allocated");
+ b = dmaStreamAllocate(uartp->dmatx,
+ STM32_UART_USART3_IRQ_PRIORITY,
+ (stm32_dmaisr_t)uart_lld_serve_tx_end_irq,
+ (void *)uartp);
+ chDbgAssert(!b, "uart_lld_start(), #6", "stream already allocated");
+ rccEnableUSART3(FALSE);
+ nvicEnableVector(STM32_USART3_NUMBER,
+ CORTEX_PRIORITY_MASK(STM32_UART_USART3_IRQ_PRIORITY));
+ uartp->dmamode |= STM32_DMA_CR_CHSEL(USART3_RX_DMA_CHANNEL) |
+ STM32_DMA_CR_PL(STM32_UART_USART3_DMA_PRIORITY);
+ }
+#endif
+
+ /* Static DMA setup, the transfer size depends on the USART settings,
+ it is 16 bits if M=1 and PCE=0 else it is 8 bits.*/
+ if ((uartp->config->cr1 & (USART_CR1_M | USART_CR1_PCE)) == USART_CR1_M)
+ uartp->dmamode |= STM32_DMA_CR_PSIZE_HWORD | STM32_DMA_CR_MSIZE_HWORD;
+ dmaStreamSetPeripheral(uartp->dmarx, &uartp->usart->RDR);
+ dmaStreamSetPeripheral(uartp->dmatx, &uartp->usart->TDR);
+ uartp->rxbuf = 0;
+ }
+
+ uartp->rxstate = UART_RX_IDLE;
+ uartp->txstate = UART_TX_IDLE;
+ usart_start(uartp);
+}
+
+/**
+ * @brief Deactivates the UART peripheral.
+ *
+ * @param[in] uartp pointer to the @p UARTDriver object
+ *
+ * @notapi
+ */
+void uart_lld_stop(UARTDriver *uartp) {
+
+ if (uartp->state == UART_READY) {
+ usart_stop(uartp);
+ dmaStreamRelease(uartp->dmarx);
+ dmaStreamRelease(uartp->dmatx);
+
+#if STM32_UART_USE_USART1
+ if (&UARTD1 == uartp) {
+ nvicDisableVector(STM32_USART1_NUMBER);
+ rccDisableUSART1(FALSE);
+ return;
+ }
+#endif
+
+#if STM32_UART_USE_USART2
+ if (&UARTD2 == uartp) {
+ nvicDisableVector(STM32_USART2_NUMBER);
+ rccDisableUSART2(FALSE);
+ return;
+ }
+#endif
+
+#if STM32_UART_USE_USART3
+ if (&UARTD3 == uartp) {
+ nvicDisableVector(STM32_USART3_NUMBER);
+ rccDisableUSART3(FALSE);
+ return;
+ }
+#endif
+ }
+}
+
+/**
+ * @brief Starts a transmission on the UART peripheral.
+ * @note The buffers are organized as uint8_t arrays for data sizes below
+ * or equal to 8 bits else it is organized as uint16_t arrays.
+ *
+ * @param[in] uartp pointer to the @p UARTDriver object
+ * @param[in] n number of data frames to send
+ * @param[in] txbuf the pointer to the transmit buffer
+ *
+ * @notapi
+ */
+void uart_lld_start_send(UARTDriver *uartp, size_t n, const void *txbuf) {
+
+ /* TX DMA channel preparation and start.*/
+ dmaStreamSetMemory0(uartp->dmatx, txbuf);
+ dmaStreamSetTransactionSize(uartp->dmatx, n);
+ dmaStreamSetMode(uartp->dmatx, uartp->dmamode | STM32_DMA_CR_DIR_M2P |
+ STM32_DMA_CR_MINC | STM32_DMA_CR_TCIE);
+ dmaStreamEnable(uartp->dmatx);
+}
+
+/**
+ * @brief Stops any ongoing transmission.
+ * @note Stopping a transmission also suppresses the transmission callbacks.
+ *
+ * @param[in] uartp pointer to the @p UARTDriver object
+ *
+ * @return The number of data frames not transmitted by the
+ * stopped transmit operation.
+ *
+ * @notapi
+ */
+size_t uart_lld_stop_send(UARTDriver *uartp) {
+
+ dmaStreamDisable(uartp->dmatx);
+ return dmaStreamGetTransactionSize(uartp->dmatx);
+}
+
+/**
+ * @brief Starts a receive operation on the UART peripheral.
+ * @note The buffers are organized as uint8_t arrays for data sizes below
+ * or equal to 8 bits else it is organized as uint16_t arrays.
+ *
+ * @param[in] uartp pointer to the @p UARTDriver object
+ * @param[in] n number of data frames to send
+ * @param[out] rxbuf the pointer to the receive buffer
+ *
+ * @notapi
+ */
+void uart_lld_start_receive(UARTDriver *uartp, size_t n, void *rxbuf) {
+
+ /* Stopping previous activity (idle state).*/
+ dmaStreamDisable(uartp->dmarx);
+
+ /* RX DMA channel preparation and start.*/
+ dmaStreamSetMemory0(uartp->dmarx, rxbuf);
+ dmaStreamSetTransactionSize(uartp->dmarx, n);
+ dmaStreamSetMode(uartp->dmarx, uartp->dmamode | STM32_DMA_CR_DIR_P2M |
+ STM32_DMA_CR_MINC | STM32_DMA_CR_TCIE);
+ dmaStreamEnable(uartp->dmarx);
+}
+
+/**
+ * @brief Stops any ongoing receive operation.
+ * @note Stopping a receive operation also suppresses the receive callbacks.
+ *
+ * @param[in] uartp pointer to the @p UARTDriver object
+ *
+ * @return The number of data frames not received by the
+ * stopped receive operation.
+ *
+ * @notapi
+ */
+size_t uart_lld_stop_receive(UARTDriver *uartp) {
+ size_t n;
+
+ dmaStreamDisable(uartp->dmarx);
+ n = dmaStreamGetTransactionSize(uartp->dmarx);
+ set_rx_idle_loop(uartp);
+ return n;
+}
+
+#endif /* HAL_USE_UART */
+
+/** @} */
diff --git a/os/hal/platforms/STM32/USARTv2/uart_lld.h b/os/hal/platforms/STM32/USARTv2/uart_lld.h new file mode 100644 index 000000000..6d44af0ba --- /dev/null +++ b/os/hal/platforms/STM32/USARTv2/uart_lld.h @@ -0,0 +1,458 @@ +/*
+ ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+/**
+ * @file STM32/USARTv2/uart_lld.h
+ * @brief STM32 low level UART driver header.
+ *
+ * @addtogroup UART
+ * @{
+ */
+
+#ifndef _UART_LLD_H_
+#define _UART_LLD_H_
+
+#if HAL_USE_UART || defined(__DOXYGEN__)
+
+/*===========================================================================*/
+/* Driver constants. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver pre-compile time settings. */
+/*===========================================================================*/
+
+/**
+ * @name Configuration options
+ * @{
+ */
+/**
+ * @brief UART driver on USART1 enable switch.
+ * @details If set to @p TRUE the support for USART1 is included.
+ * @note The default is @p FALSE.
+ */
+#if !defined(STM32_UART_USE_USART1) || defined(__DOXYGEN__)
+#define STM32_UART_USE_USART1 FALSE
+#endif
+
+/**
+ * @brief UART driver on USART2 enable switch.
+ * @details If set to @p TRUE the support for USART2 is included.
+ * @note The default is @p FALSE.
+ */
+#if !defined(STM32_UART_USE_USART2) || defined(__DOXYGEN__)
+#define STM32_UART_USE_USART2 FALSE
+#endif
+
+/**
+ * @brief UART driver on USART3 enable switch.
+ * @details If set to @p TRUE the support for USART3 is included.
+ * @note The default is @p FALSE.
+ */
+#if !defined(STM32_UART_USE_USART3) || defined(__DOXYGEN__)
+#define STM32_UART_USE_USART3 FALSE
+#endif
+
+/**
+ * @brief USART1 interrupt priority level setting.
+ */
+#if !defined(STM32_UART_USART1_IRQ_PRIORITY) || defined(__DOXYGEN__)
+#define STM32_UART_USART1_IRQ_PRIORITY 12
+#endif
+
+/**
+ * @brief USART2 interrupt priority level setting.
+ */
+#if !defined(STM32_UART_USART2_IRQ_PRIORITY) || defined(__DOXYGEN__)
+#define STM32_UART_USART2_IRQ_PRIORITY 12
+#endif
+
+/**
+ * @brief USART3 interrupt priority level setting.
+ */
+#if !defined(STM32_UART_USART3_IRQ_PRIORITY) || defined(__DOXYGEN__)
+#define STM32_UART_USART3_IRQ_PRIORITY 12
+#endif
+
+/**
+ * @brief USART1 DMA priority (0..3|lowest..highest).
+ * @note The priority level is used for both the TX and RX DMA channels but
+ * because of the channels ordering the RX channel has always priority
+ * over the TX channel.
+ */
+#if !defined(STM32_UART_USART1_DMA_PRIORITY) || defined(__DOXYGEN__)
+#define STM32_UART_USART1_DMA_PRIORITY 0
+#endif
+
+/**
+ * @brief USART2 DMA priority (0..3|lowest..highest).
+ * @note The priority level is used for both the TX and RX DMA channels but
+ * because of the channels ordering the RX channel has always priority
+ * over the TX channel.
+ */
+#if !defined(STM32_UART_USART2_DMA_PRIORITY) || defined(__DOXYGEN__)
+#define STM32_UART_USART2_DMA_PRIORITY 0
+#endif
+
+/**
+ * @brief USART3 DMA priority (0..3|lowest..highest).
+ * @note The priority level is used for both the TX and RX DMA channels but
+ * because of the channels ordering the RX channel has always priority
+ * over the TX channel.
+ */
+#if !defined(STM32_UART_USART3_DMA_PRIORITY) || defined(__DOXYGEN__)
+#define STM32_UART_USART3_DMA_PRIORITY 0
+#endif
+
+/**
+ * @brief USART1 DMA error hook.
+ * @note The default action for DMA errors is a system halt because DMA
+ * error can only happen because programming errors.
+ */
+#if !defined(STM32_UART_DMA_ERROR_HOOK) || defined(__DOXYGEN__)
+#define STM32_UART_DMA_ERROR_HOOK(uartp) chSysHalt()
+#endif
+
+#if STM32_ADVANCED_DMA || defined(__DOXYGEN__)
+
+/**
+ * @brief DMA stream used for USART1 RX operations.
+ * @note This option is only available on platforms with enhanced DMA.
+ */
+#if !defined(STM32_UART_USART1_RX_DMA_STREAM) || defined(__DOXYGEN__)
+#define STM32_UART_USART1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 5)
+#endif
+
+/**
+ * @brief DMA stream used for USART1 TX operations.
+ * @note This option is only available on platforms with enhanced DMA.
+ */
+#if !defined(STM32_UART_USART1_TX_DMA_STREAM) || defined(__DOXYGEN__)
+#define STM32_UART_USART1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7)
+#endif
+
+/**
+ * @brief DMA stream used for USART2 RX operations.
+ * @note This option is only available on platforms with enhanced DMA.
+ */
+#if !defined(STM32_UART_USART2_RX_DMA_STREAM) || defined(__DOXYGEN__)
+#define STM32_UART_USART2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5)
+#endif
+
+/**
+ * @brief DMA stream used for USART2 TX operations.
+ * @note This option is only available on platforms with enhanced DMA.
+ */
+#if !defined(STM32_UART_USART2_TX_DMA_STREAM) || defined(__DOXYGEN__)
+#define STM32_UART_USART2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6)
+#endif
+
+/**
+ * @brief DMA stream used for USART3 RX operations.
+ * @note This option is only available on platforms with enhanced DMA.
+ */
+#if !defined(STM32_UART_USART3_RX_DMA_STREAM) || defined(__DOXYGEN__)
+#define STM32_UART_USART3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 1)
+#endif
+
+/**
+ * @brief DMA stream used for USART3 TX operations.
+ * @note This option is only available on platforms with enhanced DMA.
+ */
+#if !defined(STM32_UART_USART3_TX_DMA_STREAM) || defined(__DOXYGEN__)
+#define STM32_UART_USART3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3)
+#endif
+
+#else /* !STM32_ADVANCED_DMA*/
+
+#if defined(STM32F0XX)
+/* Fixed values for STM32F0xx devices.*/
+#define STM32_UART_USART1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3)
+#define STM32_UART_USART1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2)
+#define STM32_UART_USART2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5)
+#define STM32_UART_USART2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4)
+#endif /* defined(STM32F0XX) */
+
+#if defined(STM32F30X)|| defined(STM32F37X)
+/* Fixed values for STM32F3xx devices.*/
+#define STM32_UART_USART1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5)
+#define STM32_UART_USART1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4)
+#define STM32_UART_USART2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6)
+#define STM32_UART_USART2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7)
+#define STM32_UART_USART3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3)
+#define STM32_UART_USART3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2)
+#endif /* defined(STM32F30X) */
+
+#endif /* !STM32_ADVANCED_DMA*/
+/** @} */
+
+/*===========================================================================*/
+/* Derived constants and error checks. */
+/*===========================================================================*/
+
+#if STM32_UART_USE_USART1 && !STM32_HAS_USART1
+#error "USART1 not present in the selected device"
+#endif
+
+#if STM32_UART_USE_USART2 && !STM32_HAS_USART2
+#error "USART2 not present in the selected device"
+#endif
+
+#if STM32_UART_USE_USART3 && !STM32_HAS_USART3
+#error "USART3 not present in the selected device"
+#endif
+
+#if !STM32_UART_USE_USART1 && !STM32_UART_USE_USART2 && \
+ !STM32_UART_USE_USART3
+#error "UART driver activated but no USART/UART peripheral assigned"
+#endif
+
+#if STM32_UART_USE_USART1 && \
+ !CORTEX_IS_VALID_KERNEL_PRIORITY(STM32_UART_USART1_IRQ_PRIORITY)
+#error "Invalid IRQ priority assigned to USART1"
+#endif
+
+#if STM32_UART_USE_USART2 && \
+ !CORTEX_IS_VALID_KERNEL_PRIORITY(STM32_UART_USART2_IRQ_PRIORITY)
+#error "Invalid IRQ priority assigned to USART2"
+#endif
+
+#if STM32_UART_USE_USART3 && \
+ !CORTEX_IS_VALID_KERNEL_PRIORITY(STM32_UART_USART3_IRQ_PRIORITY)
+#error "Invalid IRQ priority assigned to USART3"
+#endif
+
+#if STM32_UART_USE_USART1 && \
+ !STM32_DMA_IS_VALID_PRIORITY(STM32_UART_USART1_DMA_PRIORITY)
+#error "Invalid DMA priority assigned to USART1"
+#endif
+
+#if STM32_UART_USE_USART2 && \
+ !STM32_DMA_IS_VALID_PRIORITY(STM32_UART_USART2_DMA_PRIORITY)
+#error "Invalid DMA priority assigned to USART2"
+#endif
+
+#if STM32_UART_USE_USART3 && \
+ !STM32_DMA_IS_VALID_PRIORITY(STM32_UART_USART3_DMA_PRIORITY)
+#error "Invalid DMA priority assigned to USART3"
+#endif
+
+#if STM32_UART_USE_USART1 && \
+ !STM32_DMA_IS_VALID_ID(STM32_UART_USART1_RX_DMA_STREAM, \
+ STM32_USART1_RX_DMA_MSK)
+#error "invalid DMA stream associated to USART1 RX"
+#endif
+
+#if STM32_UART_USE_USART1 && \
+ !STM32_DMA_IS_VALID_ID(STM32_UART_USART1_TX_DMA_STREAM, \
+ STM32_USART1_TX_DMA_MSK)
+#error "invalid DMA stream associated to USART1 TX"
+#endif
+
+#if STM32_UART_USE_USART2 && \
+ !STM32_DMA_IS_VALID_ID(STM32_UART_USART2_RX_DMA_STREAM, \
+ STM32_USART2_RX_DMA_MSK)
+#error "invalid DMA stream associated to USART2 RX"
+#endif
+
+#if STM32_UART_USE_USART2 && \
+ !STM32_DMA_IS_VALID_ID(STM32_UART_USART2_TX_DMA_STREAM, \
+ STM32_USART2_TX_DMA_MSK)
+#error "invalid DMA stream associated to USART2 TX"
+#endif
+
+#if STM32_UART_USE_USART3 && \
+ !STM32_DMA_IS_VALID_ID(STM32_UART_USART3_RX_DMA_STREAM, \
+ STM32_USART3_RX_DMA_MSK)
+#error "invalid DMA stream associated to USART3 RX"
+#endif
+
+#if STM32_UART_USE_USART3 && \
+ !STM32_DMA_IS_VALID_ID(STM32_UART_USART3_TX_DMA_STREAM, \
+ STM32_USART3_TX_DMA_MSK)
+#error "invalid DMA stream associated to USART3 TX"
+#endif
+
+#if !defined(STM32_DMA_REQUIRED)
+#define STM32_DMA_REQUIRED
+#endif
+
+/*===========================================================================*/
+/* Driver data structures and types. */
+/*===========================================================================*/
+
+/**
+ * @brief UART driver condition flags type.
+ */
+typedef uint32_t uartflags_t;
+
+/**
+ * @brief Structure representing an UART driver.
+ */
+typedef struct UARTDriver UARTDriver;
+
+/**
+ * @brief Generic UART notification callback type.
+ *
+ * @param[in] uartp pointer to the @p UARTDriver object
+ */
+typedef void (*uartcb_t)(UARTDriver *uartp);
+
+/**
+ * @brief Character received UART notification callback type.
+ *
+ * @param[in] uartp pointer to the @p UARTDriver object
+ * @param[in] c received character
+ */
+typedef void (*uartccb_t)(UARTDriver *uartp, uint16_t c);
+
+/**
+ * @brief Receive error UART notification callback type.
+ *
+ * @param[in] uartp pointer to the @p UARTDriver object
+ * @param[in] e receive error mask
+ */
+typedef void (*uartecb_t)(UARTDriver *uartp, uartflags_t e);
+
+/**
+ * @brief Driver configuration structure.
+ * @note It could be empty on some architectures.
+ */
+typedef struct {
+ /**
+ * @brief End of transmission buffer callback.
+ */
+ uartcb_t txend1_cb;
+ /**
+ * @brief Physical end of transmission callback.
+ */
+ uartcb_t txend2_cb;
+ /**
+ * @brief Receive buffer filled callback.
+ */
+ uartcb_t rxend_cb;
+ /**
+ * @brief Character received while out if the @p UART_RECEIVE state.
+ */
+ uartccb_t rxchar_cb;
+ /**
+ * @brief Receive error callback.
+ */
+ uartecb_t rxerr_cb;
+ /* End of the mandatory fields.*/
+ /**
+ * @brief Bit rate.
+ */
+ uint32_t speed;
+ /**
+ * @brief Initialization value for the CR1 register.
+ */
+ uint32_t cr1;
+ /**
+ * @brief Initialization value for the CR2 register.
+ */
+ uint32_t cr2;
+ /**
+ * @brief Initialization value for the CR3 register.
+ */
+ uint32_t cr3;
+} UARTConfig;
+
+/**
+ * @brief Structure representing an UART driver.
+ */
+struct UARTDriver {
+ /**
+ * @brief Driver state.
+ */
+ uartstate_t state;
+ /**
+ * @brief Transmitter state.
+ */
+ uarttxstate_t txstate;
+ /**
+ * @brief Receiver state.
+ */
+ uartrxstate_t rxstate;
+ /**
+ * @brief Current configuration data.
+ */
+ const UARTConfig *config;
+#if defined(UART_DRIVER_EXT_FIELDS)
+ UART_DRIVER_EXT_FIELDS
+#endif
+ /* End of the mandatory fields.*/
+ /**
+ * @brief Pointer to the USART registers block.
+ */
+ USART_TypeDef *usart;
+ /**
+ * @brief DMA mode bit mask.
+ */
+ uint32_t dmamode;
+ /**
+ * @brief Receive DMA channel.
+ */
+ const stm32_dma_stream_t *dmarx;
+ /**
+ * @brief Transmit DMA channel.
+ */
+ const stm32_dma_stream_t *dmatx;
+ /**
+ * @brief Default receive buffer while into @p UART_RX_IDLE state.
+ */
+ volatile uint16_t rxbuf;
+};
+
+/*===========================================================================*/
+/* Driver macros. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* External declarations. */
+/*===========================================================================*/
+
+#if STM32_UART_USE_USART1 && !defined(__DOXYGEN__)
+extern UARTDriver UARTD1;
+#endif
+
+#if STM32_UART_USE_USART2 && !defined(__DOXYGEN__)
+extern UARTDriver UARTD2;
+#endif
+
+#if STM32_UART_USE_USART3 && !defined(__DOXYGEN__)
+extern UARTDriver UARTD3;
+#endif
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+ void uart_lld_init(void);
+ void uart_lld_start(UARTDriver *uartp);
+ void uart_lld_stop(UARTDriver *uartp);
+ void uart_lld_start_send(UARTDriver *uartp, size_t n, const void *txbuf);
+ size_t uart_lld_stop_send(UARTDriver *uartp);
+ void uart_lld_start_receive(UARTDriver *uartp, size_t n, void *rxbuf);
+ size_t uart_lld_stop_receive(UARTDriver *uartp);
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* HAL_USE_UART */
+
+#endif /* _UART_LLD_H_ */
+
+/** @} */
diff --git a/os/hal/platforms/STM32/USBv1/stm32_usb.h b/os/hal/platforms/STM32/USBv1/stm32_usb.h new file mode 100644 index 000000000..83f349e42 --- /dev/null +++ b/os/hal/platforms/STM32/USBv1/stm32_usb.h @@ -0,0 +1,243 @@ +/*
+ ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+/**
+ * @file stm32_usb.h
+ * @brief STM32 USB registers layout header.
+ * @note This file requires definitions from the ST STM32 header files
+ * stm32f10x.h or stm32l1xx.h.
+ *
+ * @addtogroup USB
+ * @{
+ */
+
+#ifndef _STM32_USB_H_
+#define _STM32_USB_H_
+
+/**
+ * @brief Number of the available endpoints.
+ * @details This value does not include the endpoint 0 which is always present.
+ */
+#define USB_ENDOPOINTS_NUMBER 7
+
+/**
+ * @brief USB registers block.
+ */
+typedef struct {
+ /**
+ * @brief Endpoint registers.
+ */
+ volatile uint32_t EPR[USB_ENDOPOINTS_NUMBER + 1];
+ /*
+ * @brief Reserved space.
+ */
+ volatile uint32_t _r20[8];
+ /*
+ * @brief Control Register.
+ */
+ volatile uint32_t CNTR;
+ /*
+ * @brief Interrupt Status Register.
+ */
+ volatile uint32_t ISTR;
+ /*
+ * @brief Frame Number Register.
+ */
+ volatile uint32_t FNR;
+ /*
+ * @brief Device Address Register.
+ */
+ volatile uint32_t DADDR;
+ /*
+ * @brief Buffer Table Address.
+ */
+ volatile uint32_t BTABLE;
+} stm32_usb_t;
+
+/**
+ * @brief USB descriptor registers block.
+ */
+typedef struct {
+ /**
+ * @brief TX buffer offset register.
+ */
+ volatile uint32_t TXADDR0;
+ /**
+ * @brief TX counter register 0.
+ */
+ volatile uint16_t TXCOUNT0;
+ /**
+ * @brief TX counter register 1.
+ */
+ volatile uint16_t TXCOUNT1;
+ /**
+ * @brief RX buffer offset register.
+ */
+ volatile uint32_t RXADDR0;
+ /**
+ * @brief RX counter register 0.
+ */
+ volatile uint16_t RXCOUNT0;
+ /**
+ * @brief RX counter register 1.
+ */
+ volatile uint16_t RXCOUNT1;
+} stm32_usb_descriptor_t;
+
+/**
+ * @name Register aliases
+ * @{
+ */
+#define RXADDR1 TXADDR0
+#define TXADDR1 RXADDR0
+/** @} */
+
+/**
+ * @brief USB registers block numeric address.
+ */
+#define STM32_USB_BASE (APB1PERIPH_BASE + 0x5C00)
+
+/**
+ * @brief USB RAM numeric address.
+ */
+#define STM32_USBRAM_BASE (APB1PERIPH_BASE + 0x6000)
+
+/**
+ * @brief Pointer to the USB registers block.
+ */
+#define STM32_USB ((stm32_usb_t *)STM32_USB_BASE)
+
+/**
+ * @brief Pointer to the USB RAM.
+ */
+#define STM32_USBRAM ((uint32_t *)STM32_USBRAM_BASE)
+
+/**
+ * @brief Size of the dedicated packet memory.
+ */
+#define USB_PMA_SIZE 512
+
+/**
+ * @brief Mask of all the toggling bits in the EPR register.
+ */
+#define EPR_TOGGLE_MASK (EPR_STAT_TX_MASK | EPR_DTOG_TX | \
+ EPR_STAT_RX_MASK | EPR_DTOG_RX | \
+ EPR_SETUP)
+
+#define EPR_EA_MASK 0x000F
+#define EPR_STAT_TX_MASK 0x0030
+#define EPR_STAT_TX_DIS 0x0000
+#define EPR_STAT_TX_STALL 0x0010
+#define EPR_STAT_TX_NAK 0x0020
+#define EPR_STAT_TX_VALID 0x0030
+#define EPR_DTOG_TX 0x0040
+#define EPR_SWBUF_RX EPR_DTOG_TX
+#define EPR_CTR_TX 0x0080
+#define EPR_EP_KIND 0x0100
+#define EPR_EP_DBL_BUF EPR_EP_KIND
+#define EPR_EP_STATUS_OUT EPR_EP_KIND
+#define EPR_EP_TYPE_MASK 0x0600
+#define EPR_EP_TYPE_BULK 0x0000
+#define EPR_EP_TYPE_CONTROL 0x0200
+#define EPR_EP_TYPE_ISO 0x0400
+#define EPR_EP_TYPE_INTERRUPT 0x0600
+#define EPR_SETUP 0x0800
+#define EPR_STAT_RX_MASK 0x3000
+#define EPR_STAT_RX_DIS 0x0000
+#define EPR_STAT_RX_STALL 0x1000
+#define EPR_STAT_RX_NAK 0x2000
+#define EPR_STAT_RX_VALID 0x3000
+#define EPR_DTOG_RX 0x4000
+#define EPR_SWBUF_TX EPR_DTOG_RX
+#define EPR_CTR_RX 0x8000
+
+#define CNTR_FRES 0x0001
+#define CNTR_PDWN 0x0002
+#define CNTR_LP_MODE 0x0004
+#define CNTR_FSUSP 0x0008
+#define CNTR_RESUME 0x0010
+#define CNTR_ESOFM 0x0100
+#define CNTR_SOFM 0x0200
+#define CNTR_RESETM 0x0400
+#define CNTR_SUSPM 0x0800
+#define CNTR_WKUPM 0x1000
+#define CNTR_ERRM 0x2000
+#define CNTR_PMAOVRM 0x4000
+#define CNTR_CTRM 0x8000
+
+#define ISTR_EP_ID_MASK 0x000F
+#define ISTR_DIR 0x0010
+#define ISTR_ESOF 0x0100
+#define ISTR_SOF 0x0200
+#define ISTR_RESET 0x0400
+#define ISTR_SUSP 0x0800
+#define ISTR_WKUP 0x1000
+#define ISTR_ERR 0x2000
+#define ISTR_PMAOVR 0x4000
+#define ISTR_CTR 0x8000
+
+#define FNR_FN_MASK 0x07FF
+#define FNR_LSOF 0x1800
+#define FNR_LCK 0x2000
+#define FNR_RXDM 0x4000
+#define FNR_RXDP 0x8000
+
+#define DADDR_ADD_MASK 0x007F
+#define DADDR_EF 0x0080
+
+#define RXCOUNT_COUNT_MASK 0x03FF
+#define TXCOUNT_COUNT_MASK 0x03FF
+
+#define EPR_SET(ep, epr) \
+ STM32_USB->EPR[ep] = (epr) & ~EPR_TOGGLE_MASK
+
+#define EPR_TOGGLE(ep, epr) \
+ STM32_USB->EPR[ep] = (STM32_USB->EPR[ep] ^ ((epr) & EPR_TOGGLE_MASK))
+
+#define EPR_SET_STAT_RX(ep, epr) \
+ STM32_USB->EPR[ep] = (STM32_USB->EPR[ep] & \
+ ~(EPR_TOGGLE_MASK & ~EPR_STAT_RX_MASK)) ^ \
+ (epr)
+
+#define EPR_SET_STAT_TX(ep, epr) \
+ STM32_USB->EPR[ep] = (STM32_USB->EPR[ep] & \
+ ~(EPR_TOGGLE_MASK & ~EPR_STAT_TX_MASK)) ^ \
+ (epr)
+
+#define EPR_CLEAR_CTR_RX(ep) \
+ STM32_USB->EPR[ep] &= ~EPR_CTR_RX & ~EPR_TOGGLE_MASK
+
+#define EPR_CLEAR_CTR_TX(ep) \
+ STM32_USB->EPR[ep] &= ~EPR_CTR_TX & ~EPR_TOGGLE_MASK
+
+/**
+ * @brief Returns an endpoint descriptor pointer.
+ */
+#define USB_GET_DESCRIPTOR(ep) \
+ ((stm32_usb_descriptor_t *)((uint32_t)STM32_USBRAM_BASE + \
+ (uint32_t)STM32_USB->BTABLE * 2 + \
+ (uint32_t)(ep) * \
+ sizeof(stm32_usb_descriptor_t)))
+
+/**
+ * @brief Converts from a PMA address to a physical address.
+ */
+#define USB_ADDR2PTR(addr) \
+ ((uint32_t *)((addr) * 2 + STM32_USBRAM_BASE))
+
+#endif /* _STM32_USB_H_ */
+
+/** @} */
diff --git a/os/hal/platforms/STM32/USBv1/usb_lld.c b/os/hal/platforms/STM32/USBv1/usb_lld.c new file mode 100644 index 000000000..22af59866 --- /dev/null +++ b/os/hal/platforms/STM32/USBv1/usb_lld.c @@ -0,0 +1,830 @@ +/*
+ ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+/**
+ * @file STM32/USBv1/usb_lld.c
+ * @brief STM32 USB subsystem low level driver source.
+ *
+ * @addtogroup USB
+ * @{
+ */
+
+#include <string.h>
+
+#include "ch.h"
+#include "hal.h"
+
+#if HAL_USE_USB || defined(__DOXYGEN__)
+
+/*===========================================================================*/
+/* Driver local definitions. */
+/*===========================================================================*/
+
+#define BTABLE_ADDR 0x0000
+
+/*===========================================================================*/
+/* Driver exported variables. */
+/*===========================================================================*/
+
+/** @brief USB1 driver identifier.*/
+#if STM32_USB_USE_USB1 || defined(__DOXYGEN__)
+USBDriver USBD1;
+#endif
+
+/*===========================================================================*/
+/* Driver local variables and types. */
+/*===========================================================================*/
+
+/**
+ * @brief EP0 state.
+ * @note It is an union because IN and OUT endpoints are never used at the
+ * same time for EP0.
+ */
+static union {
+ /**
+ * @brief IN EP0 state.
+ */
+ USBInEndpointState in;
+ /**
+ * @brief OUT EP0 state.
+ */
+ USBOutEndpointState out;
+} ep0_state;
+
+/**
+ * @brief Buffer for the EP0 setup packets.
+ */
+static uint8_t ep0setup_buffer[8];
+
+/**
+ * @brief EP0 initialization structure.
+ */
+static const USBEndpointConfig ep0config = {
+ USB_EP_MODE_TYPE_CTRL,
+ _usb_ep0setup,
+ _usb_ep0in,
+ _usb_ep0out,
+ 0x40,
+ 0x40,
+ &ep0_state.in,
+ &ep0_state.out,
+ 1,
+ ep0setup_buffer
+};
+
+/*===========================================================================*/
+/* Driver local functions. */
+/*===========================================================================*/
+
+/**
+ * @brief Resets the packet memory allocator.
+ *
+ * @param[in] usbp pointer to the @p USBDriver object
+ */
+static void usb_pm_reset(USBDriver *usbp) {
+
+ /* The first 64 bytes are reserved for the descriptors table. The effective
+ available RAM for endpoint buffers is just 448 bytes.*/
+ usbp->pmnext = 64;
+}
+
+/**
+ * @brief Resets the packet memory allocator.
+ *
+ * @param[in] usbp pointer to the @p USBDriver object
+ * @param[in] size size of the packet buffer to allocate
+ */
+static uint32_t usb_pm_alloc(USBDriver *usbp, size_t size) {
+ uint32_t next;
+
+ next = usbp->pmnext;
+ usbp->pmnext += size;
+ chDbgAssert(usbp->pmnext <= USB_PMA_SIZE, "usb_pm_alloc(), #1", "PMA overflow");
+ return next;
+}
+
+/**
+ * @brief Reads from a dedicated packet buffer.
+ *
+ * @param[in] udp pointer to a @p stm32_usb_descriptor_t
+ * @param[out] buf buffer where to copy the packet data
+ * @param[in] n maximum number of bytes to copy. This value must
+ * not exceed the maximum packet size for this endpoint.
+ *
+ * @notapi
+ */
+static void usb_packet_read_to_buffer(stm32_usb_descriptor_t *udp,
+ uint8_t *buf, size_t n) {
+ uint32_t *pmap= USB_ADDR2PTR(udp->RXADDR0);
+
+ n = (n + 1) / 2;
+ while (n > 0) {
+ /* Note, this line relies on the Cortex-M3/M4 ability to perform
+ unaligned word accesses.*/
+ *(uint16_t *)buf = (uint16_t)*pmap++;
+ buf += 2;
+ n--;
+ }
+}
+
+/**
+ * @brief Reads from a dedicated packet buffer.
+ *
+ * @param[in] udp pointer to a @p stm32_usb_descriptor_t
+ * @param[in] iqp pointer to an @p InputQueue object
+ * @param[in] n maximum number of bytes to copy. This value must
+ * not exceed the maximum packet size for this endpoint.
+ *
+ * @notapi
+ */
+static void usb_packet_read_to_queue(stm32_usb_descriptor_t *udp,
+ InputQueue *iqp, size_t n) {
+ size_t nhw;
+ uint32_t *pmap= USB_ADDR2PTR(udp->RXADDR0);
+
+ nhw = n / 2;
+ while (nhw > 0) {
+ uint32_t w;
+
+ w = *pmap++;
+ *iqp->q_wrptr++ = (uint8_t)w;
+ if (iqp->q_wrptr >= iqp->q_top)
+ iqp->q_wrptr = iqp->q_buffer;
+ *iqp->q_wrptr++ = (uint8_t)(w >> 8);
+ if (iqp->q_wrptr >= iqp->q_top)
+ iqp->q_wrptr = iqp->q_buffer;
+ nhw--;
+ }
+ /* Last byte for odd numbers.*/
+ if ((n & 1) != 0) {
+ *iqp->q_wrptr++ = (uint8_t)*pmap;
+ if (iqp->q_wrptr >= iqp->q_top)
+ iqp->q_wrptr = iqp->q_buffer;
+ }
+
+ /* Updating queue.*/
+ chSysLockFromIsr();
+ iqp->q_counter += n;
+ while (notempty(&iqp->q_waiting))
+ chSchReadyI(fifo_remove(&iqp->q_waiting))->p_u.rdymsg = Q_OK;
+ chSysUnlockFromIsr();
+}
+
+/**
+ * @brief Writes to a dedicated packet buffer.
+ *
+ * @param[in] udp pointer to a @p stm32_usb_descriptor_t
+ * @param[in] buf buffer where to fetch the packet data
+ * @param[in] n maximum number of bytes to copy. This value must
+ * not exceed the maximum packet size for this endpoint.
+ *
+ * @notapi
+ */
+static void usb_packet_write_from_buffer(stm32_usb_descriptor_t *udp,
+ const uint8_t *buf,
+ size_t n) {
+ uint32_t *pmap = USB_ADDR2PTR(udp->TXADDR0);
+
+ udp->TXCOUNT0 = (uint16_t)n;
+ n = (n + 1) / 2;
+ while (n > 0) {
+ /* Note, this line relies on the Cortex-M3/M4 ability to perform
+ unaligned word accesses.*/
+ *pmap++ = *(uint16_t *)buf;
+ buf += 2;
+ n--;
+ }
+}
+
+/**
+ * @brief Writes to a dedicated packet buffer.
+ *
+ * @param[in] udp pointer to a @p stm32_usb_descriptor_t
+ * @param[in] buf buffer where to fetch the packet data
+ * @param[in] n maximum number of bytes to copy. This value must
+ * not exceed the maximum packet size for this endpoint.
+ *
+ * @notapi
+ */
+static void usb_packet_write_from_queue(stm32_usb_descriptor_t *udp,
+ OutputQueue *oqp, size_t n) {
+ size_t nhw;
+ uint32_t *pmap = USB_ADDR2PTR(udp->TXADDR0);
+
+ udp->TXCOUNT0 = (uint16_t)n;
+ nhw = n / 2;
+ while (nhw > 0) {
+ uint32_t w;
+
+ w = (uint32_t)*oqp->q_rdptr++;
+ if (oqp->q_rdptr >= oqp->q_top)
+ oqp->q_rdptr = oqp->q_buffer;
+ w |= (uint32_t)*oqp->q_rdptr++ << 8;
+ if (oqp->q_rdptr >= oqp->q_top)
+ oqp->q_rdptr = oqp->q_buffer;
+ *pmap++ = w;
+ nhw--;
+ }
+
+ /* Last byte for odd numbers.*/
+ if ((n & 1) != 0) {
+ *pmap = (uint32_t)*oqp->q_rdptr++;
+ if (oqp->q_rdptr >= oqp->q_top)
+ oqp->q_rdptr = oqp->q_buffer;
+ }
+
+ /* Updating queue. Note, the lock is done in this unusual way because this
+ function can be called from both ISR and thread context so the kind
+ of lock function to be invoked cannot be decided beforehand.*/
+ port_lock();
+ dbg_enter_lock();
+
+ oqp->q_counter += n;
+ while (notempty(&oqp->q_waiting))
+ chSchReadyI(fifo_remove(&oqp->q_waiting))->p_u.rdymsg = Q_OK;
+
+ dbg_leave_lock();
+ port_unlock();
+}
+
+/*===========================================================================*/
+/* Driver interrupt handlers. */
+/*===========================================================================*/
+
+#if STM32_USB_USE_USB1 || defined(__DOXYGEN__)
+#if !defined(STM32_USB1_HP_HANDLER)
+#error "STM32_USB1_HP_HANDLER not defined"
+#endif
+/**
+ * @brief USB high priority interrupt handler.
+ *
+ * @isr
+ */
+CH_IRQ_HANDLER(STM32_USB1_HP_HANDLER) {
+
+ CH_IRQ_PROLOGUE();
+
+ CH_IRQ_EPILOGUE();
+}
+
+#if !defined(STM32_USB1_LP_HANDLER)
+#error "STM32_USB1_LP_HANDLER not defined"
+#endif
+/**
+ * @brief USB low priority interrupt handler.
+ *
+ * @isr
+ */
+CH_IRQ_HANDLER(STM32_USB1_LP_HANDLER) {
+ uint32_t istr;
+ USBDriver *usbp = &USBD1;
+
+ CH_IRQ_PROLOGUE();
+
+ istr = STM32_USB->ISTR;
+
+ /* USB bus reset condition handling.*/
+ if (istr & ISTR_RESET) {
+ _usb_reset(usbp);
+ _usb_isr_invoke_event_cb(usbp, USB_EVENT_RESET);
+ STM32_USB->ISTR = ~ISTR_RESET;
+ }
+
+ /* USB bus SUSPEND condition handling.*/
+ if (istr & ISTR_SUSP) {
+ STM32_USB->CNTR |= CNTR_FSUSP;
+ _usb_isr_invoke_event_cb(usbp, USB_EVENT_SUSPEND);
+#if STM32_USB_LOW_POWER_ON_SUSPEND
+ STM32_USB->CNTR |= CNTR_LP_MODE;
+#endif
+ STM32_USB->ISTR = ~ISTR_SUSP;
+ }
+
+ /* USB bus WAKEUP condition handling.*/
+ if (istr & ISTR_WKUP) {
+ uint32_t fnr = STM32_USB->FNR;
+ if (!(fnr & FNR_RXDP)) {
+ STM32_USB->CNTR &= ~CNTR_FSUSP;
+ _usb_isr_invoke_event_cb(usbp, USB_EVENT_WAKEUP);
+ }
+#if STM32_USB_LOW_POWER_ON_SUSPEND
+ else {
+ /* Just noise, going back in SUSPEND mode, reference manual 22.4.5,
+ table 169.*/
+ STM32_USB->CNTR |= CNTR_LP_MODE;
+ }
+#endif
+ STM32_USB->ISTR = ~ISTR_WKUP;
+ }
+
+ /* SOF handling.*/
+ if (istr & ISTR_SOF) {
+ _usb_isr_invoke_sof_cb(usbp);
+ STM32_USB->ISTR = ~ISTR_SOF;
+ }
+
+ /* Endpoint events handling.*/
+ while (istr & ISTR_CTR) {
+ size_t n;
+ uint32_t ep;
+ uint32_t epr = STM32_USB->EPR[ep = istr & ISTR_EP_ID_MASK];
+ const USBEndpointConfig *epcp = usbp->epc[ep];
+
+ if (epr & EPR_CTR_TX) {
+ size_t transmitted;
+ /* IN endpoint, transmission.*/
+ EPR_CLEAR_CTR_TX(ep);
+
+ transmitted = (size_t)USB_GET_DESCRIPTOR(ep)->TXCOUNT0;
+ epcp->in_state->txcnt += transmitted;
+ n = epcp->in_state->txsize - epcp->in_state->txcnt;
+ if (n > 0) {
+ /* Transfer not completed, there are more packets to send.*/
+ if (n > epcp->in_maxsize)
+ n = epcp->in_maxsize;
+
+ if (epcp->in_state->txqueued)
+ usb_packet_write_from_queue(USB_GET_DESCRIPTOR(ep),
+ epcp->in_state->mode.queue.txqueue,
+ n);
+ else {
+ epcp->in_state->mode.linear.txbuf += transmitted;
+ usb_packet_write_from_buffer(USB_GET_DESCRIPTOR(ep),
+ epcp->in_state->mode.linear.txbuf,
+ n);
+ }
+ chSysLockFromIsr();
+ usb_lld_start_in(usbp, ep);
+ chSysUnlockFromIsr();
+ }
+ else {
+ /* Transfer completed, invokes the callback.*/
+ _usb_isr_invoke_in_cb(usbp, ep);
+ }
+ }
+ if (epr & EPR_CTR_RX) {
+ EPR_CLEAR_CTR_RX(ep);
+ /* OUT endpoint, receive.*/
+ if (epr & EPR_SETUP) {
+ /* Setup packets handling, setup packets are handled using a
+ specific callback.*/
+ _usb_isr_invoke_setup_cb(usbp, ep);
+ }
+ else {
+ stm32_usb_descriptor_t *udp = USB_GET_DESCRIPTOR(ep);
+ n = (size_t)udp->RXCOUNT0 & RXCOUNT_COUNT_MASK;
+
+ /* Reads the packet into the defined buffer.*/
+ if (epcp->out_state->rxqueued)
+ usb_packet_read_to_queue(udp,
+ epcp->out_state->mode.queue.rxqueue,
+ n);
+ else {
+ usb_packet_read_to_buffer(udp,
+ epcp->out_state->mode.linear.rxbuf,
+ n);
+ epcp->out_state->mode.linear.rxbuf += n;
+ }
+ /* Transaction data updated.*/
+ epcp->out_state->rxcnt += n;
+ epcp->out_state->rxsize -= n;
+ epcp->out_state->rxpkts -= 1;
+
+ /* The transaction is completed if the specified number of packets
+ has been received or the current packet is a short packet.*/
+ if ((n < epcp->out_maxsize) || (epcp->out_state->rxpkts == 0)) {
+ /* Transfer complete, invokes the callback.*/
+ _usb_isr_invoke_out_cb(usbp, ep);
+ }
+ else {
+ /* Transfer not complete, there are more packets to receive.*/
+ EPR_SET_STAT_RX(ep, EPR_STAT_RX_VALID);
+ }
+ }
+ }
+ istr = STM32_USB->ISTR;
+ }
+
+ CH_IRQ_EPILOGUE();
+}
+#endif
+
+/*===========================================================================*/
+/* Driver exported functions. */
+/*===========================================================================*/
+
+/**
+ * @brief Low level USB driver initialization.
+ *
+ * @notapi
+ */
+void usb_lld_init(void) {
+
+ /* Driver initialization.*/
+ usbObjectInit(&USBD1);
+}
+
+/**
+ * @brief Configures and activates the USB peripheral.
+ *
+ * @param[in] usbp pointer to the @p USBDriver object
+ *
+ * @notapi
+ */
+void usb_lld_start(USBDriver *usbp) {
+
+ if (usbp->state == USB_STOP) {
+ /* Clock activation.*/
+#if STM32_USB_USE_USB1
+ if (&USBD1 == usbp) {
+ /* USB clock enabled.*/
+ rccEnableUSB(FALSE);
+ /* Powers up the transceiver while holding the USB in reset state.*/
+ STM32_USB->CNTR = CNTR_FRES;
+ /* Enabling the USB IRQ vectors, this also gives enough time to allow
+ the transceiver power up (1uS).*/
+ nvicEnableVector(STM32_USB1_HP_NUMBER,
+ CORTEX_PRIORITY_MASK(STM32_USB_USB1_HP_IRQ_PRIORITY));
+ nvicEnableVector(STM32_USB1_LP_NUMBER,
+ CORTEX_PRIORITY_MASK(STM32_USB_USB1_LP_IRQ_PRIORITY));
+ /* Releases the USB reset.*/
+ STM32_USB->CNTR = 0;
+ }
+#endif
+ /* Reset procedure enforced on driver start.*/
+ _usb_reset(usbp);
+ }
+ /* Configuration.*/
+}
+
+/**
+ * @brief Deactivates the USB peripheral.
+ *
+ * @param[in] usbp pointer to the @p USBDriver object
+ *
+ * @notapi
+ */
+void usb_lld_stop(USBDriver *usbp) {
+
+ /* If in ready state then disables the USB clock.*/
+ if (usbp->state == USB_STOP) {
+#if STM32_USB_USE_USB1
+ if (&USBD1 == usbp) {
+ nvicDisableVector(STM32_USB1_HP_NUMBER);
+ nvicDisableVector(STM32_USB1_LP_NUMBER);
+ STM32_USB->CNTR = CNTR_PDWN | CNTR_FRES;
+ rccDisableUSB(FALSE);
+ }
+#endif
+ }
+}
+
+/**
+ * @brief USB low level reset routine.
+ *
+ * @param[in] usbp pointer to the @p USBDriver object
+ *
+ * @notapi
+ */
+void usb_lld_reset(USBDriver *usbp) {
+ uint32_t cntr;
+
+ /* Post reset initialization.*/
+ STM32_USB->BTABLE = 0;
+ STM32_USB->ISTR = 0;
+ STM32_USB->DADDR = DADDR_EF;
+ cntr = /*CNTR_ESOFM | */ CNTR_RESETM | CNTR_SUSPM |
+ CNTR_WKUPM | /*CNTR_ERRM | CNTR_PMAOVRM |*/ CNTR_CTRM;
+ /* The SOF interrupt is only enabled if a callback is defined for
+ this service because it is an high rate source.*/
+ if (usbp->config->sof_cb != NULL)
+ cntr |= CNTR_SOFM;
+ STM32_USB->CNTR = cntr;
+
+ /* Resets the packet memory allocator.*/
+ usb_pm_reset(usbp);
+
+ /* EP0 initialization.*/
+ usbp->epc[0] = &ep0config;
+ usb_lld_init_endpoint(usbp, 0);
+}
+
+/**
+ * @brief Sets the USB address.
+ *
+ * @param[in] usbp pointer to the @p USBDriver object
+ *
+ * @notapi
+ */
+void usb_lld_set_address(USBDriver *usbp) {
+
+ STM32_USB->DADDR = (uint32_t)(usbp->address) | DADDR_EF;
+}
+
+/**
+ * @brief Enables an endpoint.
+ *
+ * @param[in] usbp pointer to the @p USBDriver object
+ * @param[in] ep endpoint number
+ *
+ * @notapi
+ */
+void usb_lld_init_endpoint(USBDriver *usbp, usbep_t ep) {
+ uint16_t nblocks, epr;
+ stm32_usb_descriptor_t *dp;
+ const USBEndpointConfig *epcp = usbp->epc[ep];
+
+ /* Setting the endpoint type.*/
+ switch (epcp->ep_mode & USB_EP_MODE_TYPE) {
+ case USB_EP_MODE_TYPE_ISOC:
+ epr = EPR_EP_TYPE_ISO;
+ break;
+ case USB_EP_MODE_TYPE_BULK:
+ epr = EPR_EP_TYPE_BULK;
+ break;
+ case USB_EP_MODE_TYPE_INTR:
+ epr = EPR_EP_TYPE_INTERRUPT;
+ break;
+ default:
+ epr = EPR_EP_TYPE_CONTROL;
+ }
+
+ /* IN endpoint initially in NAK mode.*/
+ if (epcp->in_cb != NULL)
+ epr |= EPR_STAT_TX_NAK;
+
+ /* OUT endpoint initially in NAK mode.*/
+ if (epcp->out_cb != NULL)
+ epr |= EPR_STAT_RX_NAK;
+
+ /* EPxR register setup.*/
+ EPR_SET(ep, epr | ep);
+ EPR_TOGGLE(ep, epr);
+
+ /* Endpoint size and address initialization.*/
+ if (epcp->out_maxsize > 62)
+ nblocks = (((((epcp->out_maxsize - 1) | 0x1f) + 1) / 32) << 10) |
+ 0x8000;
+ else
+ nblocks = ((((epcp->out_maxsize - 1) | 1) + 1) / 2) << 10;
+ dp = USB_GET_DESCRIPTOR(ep);
+ dp->TXCOUNT0 = 0;
+ dp->RXCOUNT0 = nblocks;
+ dp->TXADDR0 = usb_pm_alloc(usbp, epcp->in_maxsize);
+ dp->RXADDR0 = usb_pm_alloc(usbp, epcp->out_maxsize);
+}
+
+/**
+ * @brief Disables all the active endpoints except the endpoint zero.
+ *
+ * @param[in] usbp pointer to the @p USBDriver object
+ *
+ * @notapi
+ */
+void usb_lld_disable_endpoints(USBDriver *usbp) {
+ unsigned i;
+
+ /* Resets the packet memory allocator.*/
+ usb_pm_reset(usbp);
+
+ /* Disabling all endpoints.*/
+ for (i = 1; i <= USB_ENDOPOINTS_NUMBER; i++) {
+ EPR_TOGGLE(i, 0);
+ EPR_SET(i, 0);
+ }
+}
+
+/**
+ * @brief Returns the status of an OUT endpoint.
+ *
+ * @param[in] usbp pointer to the @p USBDriver object
+ * @param[in] ep endpoint number
+ * @return The endpoint status.
+ * @retval EP_STATUS_DISABLED The endpoint is not active.
+ * @retval EP_STATUS_STALLED The endpoint is stalled.
+ * @retval EP_STATUS_ACTIVE The endpoint is active.
+ *
+ * @notapi
+ */
+usbepstatus_t usb_lld_get_status_out(USBDriver *usbp, usbep_t ep) {
+
+ (void)usbp;
+ switch (STM32_USB->EPR[ep] & EPR_STAT_RX_MASK) {
+ case EPR_STAT_RX_DIS:
+ return EP_STATUS_DISABLED;
+ case EPR_STAT_RX_STALL:
+ return EP_STATUS_STALLED;
+ default:
+ return EP_STATUS_ACTIVE;
+ }
+}
+
+/**
+ * @brief Returns the status of an IN endpoint.
+ *
+ * @param[in] usbp pointer to the @p USBDriver object
+ * @param[in] ep endpoint number
+ * @return The endpoint status.
+ * @retval EP_STATUS_DISABLED The endpoint is not active.
+ * @retval EP_STATUS_STALLED The endpoint is stalled.
+ * @retval EP_STATUS_ACTIVE The endpoint is active.
+ *
+ * @notapi
+ */
+usbepstatus_t usb_lld_get_status_in(USBDriver *usbp, usbep_t ep) {
+
+ (void)usbp;
+ switch (STM32_USB->EPR[ep] & EPR_STAT_TX_MASK) {
+ case EPR_STAT_TX_DIS:
+ return EP_STATUS_DISABLED;
+ case EPR_STAT_TX_STALL:
+ return EP_STATUS_STALLED;
+ default:
+ return EP_STATUS_ACTIVE;
+ }
+}
+
+/**
+ * @brief Reads a setup packet from the dedicated packet buffer.
+ * @details This function must be invoked in the context of the @p setup_cb
+ * callback in order to read the received setup packet.
+ * @pre In order to use this function the endpoint must have been
+ * initialized as a control endpoint.
+ * @post The endpoint is ready to accept another packet.
+ *
+ * @param[in] usbp pointer to the @p USBDriver object
+ * @param[in] ep endpoint number
+ * @param[out] buf buffer where to copy the packet data
+ *
+ * @notapi
+ */
+void usb_lld_read_setup(USBDriver *usbp, usbep_t ep, uint8_t *buf) {
+ uint32_t *pmap;
+ stm32_usb_descriptor_t *udp;
+ uint32_t n;
+
+ (void)usbp;
+ udp = USB_GET_DESCRIPTOR(ep);
+ pmap = USB_ADDR2PTR(udp->RXADDR0);
+ for (n = 0; n < 4; n++) {
+ *(uint16_t *)buf = (uint16_t)*pmap++;
+ buf += 2;
+ }
+}
+
+/**
+ * @brief Prepares for a receive operation.
+ *
+ * @param[in] usbp pointer to the @p USBDriver object
+ * @param[in] ep endpoint number
+ *
+ * @notapi
+ */
+void usb_lld_prepare_receive(USBDriver *usbp, usbep_t ep) {
+ USBOutEndpointState *osp = usbp->epc[ep]->out_state;
+
+ /* Transfer initialization.*/
+ if (osp->rxsize == 0) /* Special case for zero sized packets.*/
+ osp->rxpkts = 1;
+ else
+ osp->rxpkts = (uint16_t)((osp->rxsize + usbp->epc[ep]->out_maxsize - 1) /
+ usbp->epc[ep]->out_maxsize);
+}
+
+/**
+ * @brief Prepares for a transmit operation.
+ *
+ * @param[in] usbp pointer to the @p USBDriver object
+ * @param[in] ep endpoint number
+ *
+ * @notapi
+ */
+void usb_lld_prepare_transmit(USBDriver *usbp, usbep_t ep) {
+ size_t n;
+ USBInEndpointState *isp = usbp->epc[ep]->in_state;
+
+ /* Transfer initialization.*/
+ n = isp->txsize;
+ if (n > (size_t)usbp->epc[ep]->in_maxsize)
+ n = (size_t)usbp->epc[ep]->in_maxsize;
+
+ if (isp->txqueued)
+ usb_packet_write_from_queue(USB_GET_DESCRIPTOR(ep),
+ isp->mode.queue.txqueue, n);
+ else
+ usb_packet_write_from_buffer(USB_GET_DESCRIPTOR(ep),
+ isp->mode.linear.txbuf, n);
+}
+
+/**
+ * @brief Starts a receive operation on an OUT endpoint.
+ *
+ * @param[in] usbp pointer to the @p USBDriver object
+ * @param[in] ep endpoint number
+ *
+ * @notapi
+ */
+void usb_lld_start_out(USBDriver *usbp, usbep_t ep) {
+
+ (void)usbp;
+
+ EPR_SET_STAT_RX(ep, EPR_STAT_RX_VALID);
+}
+
+/**
+ * @brief Starts a transmit operation on an IN endpoint.
+ *
+ * @param[in] usbp pointer to the @p USBDriver object
+ * @param[in] ep endpoint number
+ *
+ * @notapi
+ */
+void usb_lld_start_in(USBDriver *usbp, usbep_t ep) {
+
+ (void)usbp;
+
+ EPR_SET_STAT_TX(ep, EPR_STAT_TX_VALID);
+}
+
+/**
+ * @brief Brings an OUT endpoint in the stalled state.
+ *
+ * @param[in] usbp pointer to the @p USBDriver object
+ * @param[in] ep endpoint number
+ *
+ * @notapi
+ */
+void usb_lld_stall_out(USBDriver *usbp, usbep_t ep) {
+
+ (void)usbp;
+
+ EPR_SET_STAT_RX(ep, EPR_STAT_RX_STALL);
+}
+
+/**
+ * @brief Brings an IN endpoint in the stalled state.
+ *
+ * @param[in] usbp pointer to the @p USBDriver object
+ * @param[in] ep endpoint number
+ *
+ * @notapi
+ */
+void usb_lld_stall_in(USBDriver *usbp, usbep_t ep) {
+
+ (void)usbp;
+
+ EPR_SET_STAT_TX(ep, EPR_STAT_TX_STALL);
+}
+
+/**
+ * @brief Brings an OUT endpoint in the active state.
+ *
+ * @param[in] usbp pointer to the @p USBDriver object
+ * @param[in] ep endpoint number
+ *
+ * @notapi
+ */
+void usb_lld_clear_out(USBDriver *usbp, usbep_t ep) {
+
+ (void)usbp;
+
+ /* Makes sure to not put to NAK an endpoint that is already
+ transferring.*/
+ if ((STM32_USB->EPR[ep] & EPR_STAT_RX_MASK) != EPR_STAT_RX_VALID)
+ EPR_SET_STAT_TX(ep, EPR_STAT_RX_NAK);
+}
+
+/**
+ * @brief Brings an IN endpoint in the active state.
+ *
+ * @param[in] usbp pointer to the @p USBDriver object
+ * @param[in] ep endpoint number
+ *
+ * @notapi
+ */
+void usb_lld_clear_in(USBDriver *usbp, usbep_t ep) {
+
+ (void)usbp;
+
+ /* Makes sure to not put to NAK an endpoint that is already
+ transferring.*/
+ if ((STM32_USB->EPR[ep] & EPR_STAT_TX_MASK) != EPR_STAT_TX_VALID)
+ EPR_SET_STAT_TX(ep, EPR_STAT_TX_NAK);
+}
+
+#endif /* HAL_USE_USB */
+
+/** @} */
diff --git a/os/hal/platforms/STM32/USBv1/usb_lld.h b/os/hal/platforms/STM32/USBv1/usb_lld.h new file mode 100644 index 000000000..a0092a334 --- /dev/null +++ b/os/hal/platforms/STM32/USBv1/usb_lld.h @@ -0,0 +1,437 @@ +/*
+ ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+/**
+ * @file STM32/USBv1/usb_lld.h
+ * @brief STM32 USB subsystem low level driver header.
+ *
+ * @addtogroup USB
+ * @{
+ */
+
+#ifndef _USB_LLD_H_
+#define _USB_LLD_H_
+
+#if HAL_USE_USB || defined(__DOXYGEN__)
+
+#include "stm32_usb.h"
+
+/*===========================================================================*/
+/* Driver constants. */
+/*===========================================================================*/
+
+/**
+ * @brief Maximum endpoint address.
+ */
+#define USB_MAX_ENDPOINTS USB_ENDOPOINTS_NUMBER
+
+/**
+ * @brief This device requires the address change after the status packet.
+ */
+#define USB_SET_ADDRESS_MODE USB_LATE_SET_ADDRESS
+
+/*===========================================================================*/
+/* Driver pre-compile time settings. */
+/*===========================================================================*/
+
+/**
+ * @brief USB1 driver enable switch.
+ * @details If set to @p TRUE the support for USB1 is included.
+ * @note The default is @p TRUE.
+ */
+#if !defined(STM32_USB_USE_USB1) || defined(__DOXYGEN__)
+#define STM32_USB_USE_USB1 FALSE
+#endif
+
+/**
+ * @brief Enables the USB device low power mode on suspend.
+ */
+#if !defined(STM32_USB_LOW_POWER_ON_SUSPEND) || defined(__DOXYGEN__)
+#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE
+#endif
+
+/**
+ * @brief USB1 interrupt priority level setting.
+ */
+#if !defined(STM32_USB_USB1_HP_IRQ_PRIORITY) || defined(__DOXYGEN__)
+#define STM32_USB_USB1_HP_IRQ_PRIORITY 13
+#endif
+
+/**
+ * @brief USB1 interrupt priority level setting.
+ */
+#if !defined(STM32_USB_USB1_LP_IRQ_PRIORITY) || defined(__DOXYGEN__)
+#define STM32_USB_USB1_LP_IRQ_PRIORITY 14
+#endif
+
+/*===========================================================================*/
+/* Derived constants and error checks. */
+/*===========================================================================*/
+
+#if STM32_USB_USE_USB1 && !STM32_HAS_USB
+#error "USB not present in the selected device"
+#endif
+
+#if !STM32_USB_USE_USB1
+#error "USB driver activated but no USB peripheral assigned"
+#endif
+
+#if STM32_USB_USE_USB1 && \
+ !CORTEX_IS_VALID_KERNEL_PRIORITY(STM32_USB_USB1_HP_IRQ_PRIORITY)
+#error "Invalid IRQ priority assigned to USB HP"
+#endif
+
+#if STM32_USB_USE_USB1 && \
+ !CORTEX_IS_VALID_KERNEL_PRIORITY(STM32_USB_USB1_LP_IRQ_PRIORITY)
+#error "Invalid IRQ priority assigned to USB LP"
+#endif
+
+#if STM32_USBCLK != 48000000
+#error "the USB driver requires a 48MHz clock"
+#endif
+
+/*===========================================================================*/
+/* Driver data structures and types. */
+/*===========================================================================*/
+
+/**
+ * @brief Type of an IN endpoint state structure.
+ */
+typedef struct {
+ /**
+ * @brief Buffer mode, queue or linear.
+ */
+ bool_t txqueued;
+ /**
+ * @brief Requested transmit transfer size.
+ */
+ size_t txsize;
+ /**
+ * @brief Transmitted bytes so far.
+ */
+ size_t txcnt;
+ union {
+ struct {
+ /**
+ * @brief Pointer to the transmission linear buffer.
+ */
+ const uint8_t *txbuf;
+ } linear;
+ struct {
+ /**
+ * @brief Pointer to the output queue.
+ */
+ OutputQueue *txqueue;
+ } queue;
+ /* End of the mandatory fields.*/
+ } mode;
+} USBInEndpointState;
+
+/**
+ * @brief Type of an OUT endpoint state structure.
+ */
+typedef struct {
+ /**
+ * @brief Buffer mode, queue or linear.
+ */
+ bool_t rxqueued;
+ /**
+ * @brief Requested receive transfer size.
+ */
+ size_t rxsize;
+ /**
+ * @brief Received bytes so far.
+ */
+ size_t rxcnt;
+ union {
+ struct {
+ /**
+ * @brief Pointer to the receive linear buffer.
+ */
+ uint8_t *rxbuf;
+ } linear;
+ struct {
+ /**
+ * @brief Pointer to the input queue.
+ */
+ InputQueue *rxqueue;
+ } queue;
+ } mode;
+ /* End of the mandatory fields.*/
+ /**
+ * @brief Number of packets to receive.
+ */
+ uint16_t rxpkts;
+} USBOutEndpointState;
+
+/**
+ * @brief Type of an USB endpoint configuration structure.
+ * @note Platform specific restrictions may apply to endpoints.
+ */
+typedef struct {
+ /**
+ * @brief Type and mode of the endpoint.
+ */
+ uint32_t ep_mode;
+ /**
+ * @brief Setup packet notification callback.
+ * @details This callback is invoked when a setup packet has been
+ * received.
+ * @post The application must immediately call @p usbReadPacket() in
+ * order to access the received packet.
+ * @note This field is only valid for @p USB_EP_MODE_TYPE_CTRL
+ * endpoints, it should be set to @p NULL for other endpoint
+ * types.
+ */
+ usbepcallback_t setup_cb;
+ /**
+ * @brief IN endpoint notification callback.
+ * @details This field must be set to @p NULL if the IN endpoint is not
+ * used.
+ */
+ usbepcallback_t in_cb;
+ /**
+ * @brief OUT endpoint notification callback.
+ * @details This field must be set to @p NULL if the OUT endpoint is not
+ * used.
+ */
+ usbepcallback_t out_cb;
+ /**
+ * @brief IN endpoint maximum packet size.
+ * @details This field must be set to zero if the IN endpoint is not
+ * used.
+ */
+ uint16_t in_maxsize;
+ /**
+ * @brief OUT endpoint maximum packet size.
+ * @details This field must be set to zero if the OUT endpoint is not
+ * used.
+ */
+ uint16_t out_maxsize;
+ /**
+ * @brief @p USBEndpointState associated to the IN endpoint.
+ * @details This structure maintains the state of the IN endpoint.
+ */
+ USBInEndpointState *in_state;
+ /**
+ * @brief @p USBEndpointState associated to the OUT endpoint.
+ * @details This structure maintains the state of the OUT endpoint.
+ */
+ USBOutEndpointState *out_state;
+ /* End of the mandatory fields.*/
+ /**
+ * @brief Reserved field, not currently used.
+ * @note Initialize this field to 1 in order to be forward compatible.
+ */
+ uint16_t ep_buffers;
+ /**
+ * @brief Pointer to a buffer for setup packets.
+ * @details Setup packets require a dedicated 8-bytes buffer, set this
+ * field to @p NULL for non-control endpoints.
+ */
+ uint8_t *setup_buf;
+} USBEndpointConfig;
+
+/**
+ * @brief Type of an USB driver configuration structure.
+ */
+typedef struct {
+ /**
+ * @brief USB events callback.
+ * @details This callback is invoked when an USB driver event is registered.
+ */
+ usbeventcb_t event_cb;
+ /**
+ * @brief Device GET_DESCRIPTOR request callback.
+ * @note This callback is mandatory and cannot be set to @p NULL.
+ */
+ usbgetdescriptor_t get_descriptor_cb;
+ /**
+ * @brief Requests hook callback.
+ * @details This hook allows to be notified of standard requests or to
+ * handle non standard requests.
+ */
+ usbreqhandler_t requests_hook_cb;
+ /**
+ * @brief Start Of Frame callback.
+ */
+ usbcallback_t sof_cb;
+ /* End of the mandatory fields.*/
+} USBConfig;
+
+/**
+ * @brief Structure representing an USB driver.
+ */
+struct USBDriver {
+ /**
+ * @brief Driver state.
+ */
+ usbstate_t state;
+ /**
+ * @brief Current configuration data.
+ */
+ const USBConfig *config;
+ /**
+ * @brief Bit map of the transmitting IN endpoints.
+ */
+ uint16_t transmitting;
+ /**
+ * @brief Bit map of the receiving OUT endpoints.
+ */
+ uint16_t receiving;
+ /**
+ * @brief Active endpoints configurations.
+ */
+ const USBEndpointConfig *epc[USB_MAX_ENDPOINTS + 1];
+ /**
+ * @brief Fields available to user, it can be used to associate an
+ * application-defined handler to an IN endpoint.
+ * @note The base index is one, the endpoint zero does not have a
+ * reserved element in this array.
+ */
+ void *in_params[USB_MAX_ENDPOINTS];
+ /**
+ * @brief Fields available to user, it can be used to associate an
+ * application-defined handler to an OUT endpoint.
+ * @note The base index is one, the endpoint zero does not have a
+ * reserved element in this array.
+ */
+ void *out_params[USB_MAX_ENDPOINTS];
+ /**
+ * @brief Endpoint 0 state.
+ */
+ usbep0state_t ep0state;
+ /**
+ * @brief Next position in the buffer to be transferred through endpoint 0.
+ */
+ uint8_t *ep0next;
+ /**
+ * @brief Number of bytes yet to be transferred through endpoint 0.
+ */
+ size_t ep0n;
+ /**
+ * @brief Endpoint 0 end transaction callback.
+ */
+ usbcallback_t ep0endcb;
+ /**
+ * @brief Setup packet buffer.
+ */
+ uint8_t setup[8];
+ /**
+ * @brief Current USB device status.
+ */
+ uint16_t status;
+ /**
+ * @brief Assigned USB address.
+ */
+ uint8_t address;
+ /**
+ * @brief Current USB device configuration.
+ */
+ uint8_t configuration;
+#if defined(USB_DRIVER_EXT_FIELDS)
+ USB_DRIVER_EXT_FIELDS
+#endif
+ /* End of the mandatory fields.*/
+ /**
+ * @brief Pointer to the next address in the packet memory.
+ */
+ uint32_t pmnext;
+};
+
+/*===========================================================================*/
+/* Driver macros. */
+/*===========================================================================*/
+
+/**
+ * @brief Returns the current frame number.
+ *
+ * @param[in] usbp pointer to the @p USBDriver object
+ * @return The current frame number.
+ *
+ * @notapi
+ */
+#define usb_lld_get_frame_number(usbp) (STM32_USB->FNR & FNR_FN_MASK)
+
+/**
+ * @brief Returns the exact size of a receive transaction.
+ * @details The received size can be different from the size specified in
+ * @p usbStartReceiveI() because the last packet could have a size
+ * different from the expected one.
+ * @pre The OUT endpoint must have been configured in transaction mode
+ * in order to use this function.
+ *
+ * @param[in] usbp pointer to the @p USBDriver object
+ * @param[in] ep endpoint number
+ * @return Received data size.
+ *
+ * @notapi
+ */
+#define usb_lld_get_transaction_size(usbp, ep) \
+ ((usbp)->epc[ep]->out_state->rxcnt)
+
+/**
+ * @brief Returns the exact size of a received packet.
+ * @pre The OUT endpoint must have been configured in packet mode
+ * in order to use this function.
+ *
+ * @param[in] usbp pointer to the @p USBDriver object
+ * @param[in] ep endpoint number
+ * @return Received data size.
+ *
+ * @notapi
+ */
+#define usb_lld_get_packet_size(usbp, ep) \
+ ((size_t)USB_GET_DESCRIPTOR(ep)->RXCOUNT & RXCOUNT_COUNT_MASK)
+
+/*===========================================================================*/
+/* External declarations. */
+/*===========================================================================*/
+
+#if STM32_USB_USE_USB1 && !defined(__DOXYGEN__)
+extern USBDriver USBD1;
+#endif
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+ void usb_lld_init(void);
+ void usb_lld_start(USBDriver *usbp);
+ void usb_lld_stop(USBDriver *usbp);
+ void usb_lld_reset(USBDriver *usbp);
+ void usb_lld_set_address(USBDriver *usbp);
+ void usb_lld_init_endpoint(USBDriver *usbp, usbep_t ep);
+ void usb_lld_disable_endpoints(USBDriver *usbp);
+ usbepstatus_t usb_lld_get_status_in(USBDriver *usbp, usbep_t ep);
+ usbepstatus_t usb_lld_get_status_out(USBDriver *usbp, usbep_t ep);
+ void usb_lld_read_setup(USBDriver *usbp, usbep_t ep, uint8_t *buf);
+ void usb_lld_prepare_receive(USBDriver *usbp, usbep_t ep);
+ void usb_lld_prepare_transmit(USBDriver *usbp, usbep_t ep);
+ void usb_lld_start_out(USBDriver *usbp, usbep_t ep);
+ void usb_lld_start_in(USBDriver *usbp, usbep_t ep);
+ void usb_lld_stall_out(USBDriver *usbp, usbep_t ep);
+ void usb_lld_stall_in(USBDriver *usbp, usbep_t ep);
+ void usb_lld_clear_out(USBDriver *usbp, usbep_t ep);
+ void usb_lld_clear_in(USBDriver *usbp, usbep_t ep);
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* HAL_USE_USB */
+
+#endif /* _USB_LLD_H_ */
+
+/** @} */
diff --git a/os/hal/platforms/STM32/can_lld.c b/os/hal/platforms/STM32/can_lld.c new file mode 100644 index 000000000..2febf5bc9 --- /dev/null +++ b/os/hal/platforms/STM32/can_lld.c @@ -0,0 +1,706 @@ +/*
+ ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+/**
+ * @file STM32/can_lld.c
+ * @brief STM32 CAN subsystem low level driver source.
+ *
+ * @addtogroup CAN
+ * @{
+ */
+
+#include "hal.h"
+
+#if HAL_USE_CAN || defined(__DOXYGEN__)
+
+/*===========================================================================*/
+/* Driver local definitions. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver exported variables. */
+/*===========================================================================*/
+
+/** @brief CAN1 driver identifier.*/
+#if STM32_CAN_USE_CAN1 || defined(__DOXYGEN__)
+CANDriver CAND1;
+#endif
+
+/** @brief CAN2 driver identifier.*/
+#if STM32_CAN_USE_CAN2 || defined(__DOXYGEN__)
+CANDriver CAND2;
+#endif
+
+/*===========================================================================*/
+/* Driver local variables and types. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver local functions. */
+/*===========================================================================*/
+
+/**
+ * @brief Programs the filters.
+ *
+ * @param[in] can2sb number of the first filter assigned to CAN2
+ * @param[in] num number of entries in the filters array, if zero then
+ * a default filter is programmed
+ * @param[in] cfp pointer to the filters array, can be @p NULL if
+ * (num == 0)
+ *
+ * @notapi
+ */
+static void can_lld_set_filters(uint32_t can2sb,
+ uint32_t num,
+ const CANFilter *cfp) {
+
+ /* Temporarily enabling CAN1 clock.*/
+ rccEnableCAN1(FALSE);
+
+ /* Filters initialization.*/
+ CAN1->FMR = (CAN1->FMR & 0xFFFF0000) | (can2sb << 8) | CAN_FMR_FINIT;
+ if (num > 0) {
+ uint32_t i, fmask;
+
+ /* All filters cleared.*/
+ CAN1->FA1R = 0;
+ CAN1->FM1R = 0;
+ CAN1->FS1R = 0;
+ CAN1->FFA1R = 0;
+ for (i = 0; i < STM32_CAN_MAX_FILTERS; i++) {
+ CAN1->sFilterRegister[i].FR1 = 0;
+ CAN1->sFilterRegister[i].FR2 = 0;
+ }
+
+ /* Scanning the filters array.*/
+ for (i = 0; i < num; i++) {
+ fmask = 1 << cfp->filter;
+ if (cfp->mode)
+ CAN1->FM1R |= fmask;
+ if (cfp->scale)
+ CAN1->FS1R |= fmask;
+ if (cfp->assignment)
+ CAN1->FFA1R |= fmask;
+ CAN1->sFilterRegister[cfp->filter].FR1 = cfp->register1;
+ CAN1->sFilterRegister[cfp->filter].FR2 = cfp->register2;
+ CAN1->FA1R |= fmask;
+ cfp++;
+ }
+ }
+ else {
+ /* Setting up a single default filter that enables everything for both
+ CANs.*/
+ CAN1->sFilterRegister[0].FR1 = 0;
+ CAN1->sFilterRegister[0].FR2 = 0;
+ CAN1->sFilterRegister[can2sb].FR1 = 0;
+ CAN1->sFilterRegister[can2sb].FR2 = 0;
+ CAN1->FM1R = 0;
+ CAN1->FFA1R = 0;
+ CAN1->FS1R = 1 | (1 << can2sb);
+ CAN1->FA1R = 1 | (1 << can2sb);
+ }
+ CAN1->FMR &= ~CAN_FMR_FINIT;
+
+ /* Clock disabled, it will be enabled again in can_lld_start().*/
+ rccDisableCAN1(FALSE);
+}
+
+/**
+ * @brief Common TX ISR handler.
+ *
+ * @param[in] canp pointer to the @p CANDriver object
+ *
+ * @notapi
+ */
+static void can_lld_tx_handler(CANDriver *canp) {
+
+ /* No more events until a message is transmitted.*/
+ canp->can->TSR = CAN_TSR_RQCP0 | CAN_TSR_RQCP1 | CAN_TSR_RQCP2;
+ osalSysLockFromISR();
+ osalQueueWakeupAllI(&canp->txqueue, MSG_OK);
+ osalEventBroadcastFlagsI(&canp->txempty_event, CAN_MAILBOX_TO_MASK(1));
+ osalSysUnlockFromISR();
+}
+
+/**
+ * @brief Common RX0 ISR handler.
+ *
+ * @param[in] canp pointer to the @p CANDriver object
+ *
+ * @notapi
+ */
+static void can_lld_rx0_handler(CANDriver *canp) {
+ uint32_t rf0r;
+
+ rf0r = canp->can->RF0R;
+ if ((rf0r & CAN_RF0R_FMP0) > 0) {
+ /* No more receive events until the queue 0 has been emptied.*/
+ canp->can->IER &= ~CAN_IER_FMPIE0;
+ osalSysLockFromISR();
+ osalQueueWakeupAllI(&canp->rxqueue, MSG_OK);
+ osalEventBroadcastFlagsI(&canp->rxfull_event, CAN_MAILBOX_TO_MASK(1));
+ osalSysUnlockFromISR();
+ }
+ if ((rf0r & CAN_RF0R_FOVR0) > 0) {
+ /* Overflow events handling.*/
+ canp->can->RF0R = CAN_RF0R_FOVR0;
+ osalSysLockFromISR();
+ osalEventBroadcastFlagsI(&canp->error_event, CAN_OVERFLOW_ERROR);
+ osalSysUnlockFromISR();
+ }
+}
+
+/**
+ * @brief Common RX1 ISR handler.
+ *
+ * @param[in] canp pointer to the @p CANDriver object
+ *
+ * @notapi
+ */
+static void can_lld_rx1_handler(CANDriver *canp) {
+ uint32_t rf1r;
+
+ rf1r = canp->can->RF1R;
+ if ((rf1r & CAN_RF1R_FMP1) > 0) {
+ /* No more receive events until the queue 0 has been emptied.*/
+ canp->can->IER &= ~CAN_IER_FMPIE1;
+ osalSysLockFromISR();
+ osalQueueWakeupAllI(&canp->rxqueue, MSG_OK);
+ osalEventBroadcastFlagsI(&canp->rxfull_event, CAN_MAILBOX_TO_MASK(2));
+ osalSysUnlockFromISR();
+ }
+ if ((rf1r & CAN_RF1R_FOVR1) > 0) {
+ /* Overflow events handling.*/
+ canp->can->RF1R = CAN_RF1R_FOVR1;
+ osalSysLockFromISR();
+ osalEventBroadcastFlagsI(&canp->error_event, CAN_OVERFLOW_ERROR);
+ osalSysUnlockFromISR();
+ }
+}
+
+/**
+ * @brief Common SCE ISR handler.
+ *
+ * @param[in] canp pointer to the @p CANDriver object
+ *
+ * @notapi
+ */
+static void can_lld_sce_handler(CANDriver *canp) {
+ uint32_t msr;
+
+ msr = canp->can->MSR;
+ canp->can->MSR = CAN_MSR_ERRI | CAN_MSR_WKUI | CAN_MSR_SLAKI;
+ /* Wakeup event.*/
+#if CAN_USE_SLEEP_MODE
+ if (msr & CAN_MSR_WKUI) {
+ canp->state = CAN_READY;
+ canp->can->MCR &= ~CAN_MCR_SLEEP;
+ osalSysLockFromISR();
+ osalEventBroadcastFlagsI(&canp->wakeup_event, 0);
+ osalSysUnlockFromISR();
+ }
+#endif /* CAN_USE_SLEEP_MODE */
+ /* Error event.*/
+ if (msr & CAN_MSR_ERRI) {
+ eventflags_t flags;
+ uint32_t esr = canp->can->ESR;
+
+ canp->can->ESR &= ~CAN_ESR_LEC;
+ flags = (eventflags_t)(esr & 7);
+ if ((esr & CAN_ESR_LEC) > 0)
+ flags |= CAN_FRAMING_ERROR;
+
+ osalSysLockFromISR();
+ /* The content of the ESR register is copied unchanged in the upper
+ half word of the listener flags mask.*/
+ osalEventBroadcastFlagsI(&canp->error_event, flags | (eventflags_t)(esr << 16));
+ osalSysUnlockFromISR();
+ }
+}
+
+/*===========================================================================*/
+/* Driver interrupt handlers. */
+/*===========================================================================*/
+
+#if STM32_CAN_USE_CAN1 || defined(__DOXYGEN__)
+/**
+ * @brief CAN1 TX interrupt handler.
+ *
+ * @isr
+ */
+OSAL_IRQ_HANDLER(STM32_CAN1_TX_HANDLER) {
+
+ OSAL_IRQ_PROLOGUE();
+
+ can_lld_tx_handler(&CAND1);
+
+ OSAL_IRQ_EPILOGUE();
+}
+
+/*
+ * @brief CAN1 RX0 interrupt handler.
+ *
+ * @isr
+ */
+OSAL_IRQ_HANDLER(STM32_CAN1_RX0_HANDLER) {
+
+ OSAL_IRQ_PROLOGUE();
+
+ can_lld_rx0_handler(&CAND1);
+
+ OSAL_IRQ_EPILOGUE();
+}
+
+/**
+ * @brief CAN1 RX1 interrupt handler.
+ *
+ * @isr
+ */
+OSAL_IRQ_HANDLER(STM32_CAN1_RX1_HANDLER) {
+
+ OSAL_IRQ_PROLOGUE();
+
+ can_lld_rx1_handler(&CAND1);
+
+ OSAL_IRQ_EPILOGUE();
+}
+
+/**
+ * @brief CAN1 SCE interrupt handler.
+ *
+ * @isr
+ */
+OSAL_IRQ_HANDLER(STM32_CAN1_SCE_HANDLER) {
+
+ OSAL_IRQ_PROLOGUE();
+
+ can_lld_sce_handler(&CAND1);
+
+ OSAL_IRQ_EPILOGUE();
+}
+#endif /* STM32_CAN_USE_CAN1 */
+
+#if STM32_CAN_USE_CAN2 || defined(__DOXYGEN__)
+/**
+ * @brief CAN2 TX interrupt handler.
+ *
+ * @isr
+ */
+OSAL_IRQ_HANDLER(STM32_CAN2_TX_HANDLER) {
+
+ OSAL_IRQ_PROLOGUE();
+
+ can_lld_tx_handler(&CAND2);
+
+ OSAL_IRQ_EPILOGUE();
+}
+
+/*
+ * @brief CAN2 RX0 interrupt handler.
+ *
+ * @isr
+ */
+OSAL_IRQ_HANDLER(STM32_CAN2_RX0_HANDLER) {
+
+ OSAL_IRQ_PROLOGUE();
+
+ can_lld_rx0_handler(&CAND2);
+
+ OSAL_IRQ_EPILOGUE();
+}
+
+/**
+ * @brief CAN2 RX1 interrupt handler.
+ *
+ * @isr
+ */
+OSAL_IRQ_HANDLER(STM32_CAN2_RX1_HANDLER) {
+
+ OSAL_IRQ_PROLOGUE();
+
+ can_lld_rx1_handler(&CAND2);
+
+ OSAL_IRQ_EPILOGUE();
+}
+
+/**
+ * @brief CAN2 SCE interrupt handler.
+ *
+ * @isr
+ */
+OSAL_IRQ_HANDLER(STM32_CAN2_SCE_HANDLER) {
+
+ OSAL_IRQ_PROLOGUE();
+
+ can_lld_sce_handler(&CAND2);
+
+ OSAL_IRQ_EPILOGUE();
+}
+#endif /* STM32_CAN_USE_CAN2 */
+
+/*===========================================================================*/
+/* Driver exported functions. */
+/*===========================================================================*/
+
+/**
+ * @brief Low level CAN driver initialization.
+ *
+ * @notapi
+ */
+void can_lld_init(void) {
+
+#if STM32_CAN_USE_CAN1
+ /* Driver initialization.*/
+ canObjectInit(&CAND1);
+ CAND1.can = CAN1;
+#endif
+#if STM32_CAN_USE_CAN2
+ /* Driver initialization.*/
+ canObjectInit(&CAND2);
+ CAND2.can = CAN2;
+#endif
+
+ /* Filters initialization.*/
+#if STM32_HAS_CAN2
+ can_lld_set_filters(STM32_CAN_MAX_FILTERS / 2, 0, NULL);
+#else
+ can_lld_set_filters(STM32_CAN_MAX_FILTERS, 0, NULL);
+#endif
+
+}
+
+/**
+ * @brief Configures and activates the CAN peripheral.
+ *
+ * @param[in] canp pointer to the @p CANDriver object
+ *
+ * @notapi
+ */
+void can_lld_start(CANDriver *canp) {
+
+ /* Clock activation.*/
+#if STM32_CAN_USE_CAN1
+ if (&CAND1 == canp) {
+ nvicEnableVector(STM32_CAN1_TX_NUMBER, STM32_CAN_CAN1_IRQ_PRIORITY);
+ nvicEnableVector(STM32_CAN1_RX0_NUMBER, STM32_CAN_CAN1_IRQ_PRIORITY);
+ nvicEnableVector(STM32_CAN1_RX1_NUMBER, STM32_CAN_CAN1_IRQ_PRIORITY);
+ nvicEnableVector(STM32_CAN1_SCE_NUMBER, STM32_CAN_CAN1_IRQ_PRIORITY);
+ rccEnableCAN1(FALSE);
+ }
+#endif
+#if STM32_CAN_USE_CAN2
+ if (&CAND2 == canp) {
+
+ osalDbgAssert(CAND1.state != CAN_STOP,
+ "can_lld_start(), #1", "CAN1 must be started");
+
+ nvicEnableVector(STM32_CAN2_TX_NUMBER, STM32_CAN_CAN2_IRQ_PRIORITY);
+ nvicEnableVector(STM32_CAN2_RX0_NUMBER, STM32_CAN_CAN2_IRQ_PRIORITY);
+ nvicEnableVector(STM32_CAN2_RX1_NUMBER, STM32_CAN_CAN2_IRQ_PRIORITY);
+ nvicEnableVector(STM32_CAN2_SCE_NUMBER, STM32_CAN_CAN2_IRQ_PRIORITY);
+ rccEnableCAN2(FALSE);
+ }
+#endif
+
+ /* Entering initialization mode. */
+ canp->state = CAN_STARTING;
+ canp->can->MCR = CAN_MCR_INRQ;
+ while ((canp->can->MSR & CAN_MSR_INAK) == 0)
+ osalThreadSleepS(1);
+ /* BTR initialization.*/
+ canp->can->BTR = canp->config->btr;
+ /* MCR initialization.*/
+ canp->can->MCR = canp->config->mcr;
+
+ /* Interrupt sources initialization.*/
+ canp->can->IER = CAN_IER_TMEIE | CAN_IER_FMPIE0 | CAN_IER_FMPIE1 |
+ CAN_IER_WKUIE | CAN_IER_ERRIE | CAN_IER_LECIE |
+ CAN_IER_BOFIE | CAN_IER_EPVIE | CAN_IER_EWGIE |
+ CAN_IER_FOVIE0 | CAN_IER_FOVIE1;
+}
+
+/**
+ * @brief Deactivates the CAN peripheral.
+ *
+ * @param[in] canp pointer to the @p CANDriver object
+ *
+ * @notapi
+ */
+void can_lld_stop(CANDriver *canp) {
+
+ /* If in ready state then disables the CAN peripheral.*/
+ if (canp->state == CAN_READY) {
+#if STM32_CAN_USE_CAN1
+ if (&CAND1 == canp) {
+
+#if STM32_CAN_USE_CAN2
+ osalDbgAssert(CAND2.state == CAN_STOP,
+ "can_lld_stop(), #1", "CAN2 must be stopped");
+#endif
+
+ CAN1->MCR = 0x00010002; /* Register reset value. */
+ CAN1->IER = 0x00000000; /* All sources disabled. */
+ nvicDisableVector(STM32_CAN1_TX_NUMBER);
+ nvicDisableVector(STM32_CAN1_RX0_NUMBER);
+ nvicDisableVector(STM32_CAN1_RX1_NUMBER);
+ nvicDisableVector(STM32_CAN1_SCE_NUMBER);
+ rccDisableCAN1(FALSE);
+ }
+#endif
+#if STM32_CAN_USE_CAN2
+ if (&CAND2 == canp) {
+ CAN2->MCR = 0x00010002; /* Register reset value. */
+ CAN2->IER = 0x00000000; /* All sources disabled. */
+ nvicDisableVector(STM32_CAN2_TX_NUMBER);
+ nvicDisableVector(STM32_CAN2_RX0_NUMBER);
+ nvicDisableVector(STM32_CAN2_RX1_NUMBER);
+ nvicDisableVector(STM32_CAN2_SCE_NUMBER);
+ rccDisableCAN2(FALSE);
+ }
+#endif
+ }
+}
+
+/**
+ * @brief Determines whether a frame can be transmitted.
+ *
+ * @param[in] canp pointer to the @p CANDriver object
+ * @param[in] mailbox mailbox number, @p CAN_ANY_MAILBOX for any mailbox
+ *
+ * @return The queue space availability.
+ * @retval FALSE no space in the transmit queue.
+ * @retval TRUE transmit slot available.
+ *
+ * @notapi
+ */
+bool_t can_lld_is_tx_empty(CANDriver *canp, canmbx_t mailbox) {
+
+ switch (mailbox) {
+ case CAN_ANY_MAILBOX:
+ return (canp->can->TSR & CAN_TSR_TME) != 0;
+ case 1:
+ return (canp->can->TSR & CAN_TSR_TME0) != 0;
+ case 2:
+ return (canp->can->TSR & CAN_TSR_TME1) != 0;
+ case 3:
+ return (canp->can->TSR & CAN_TSR_TME2) != 0;
+ default:
+ return FALSE;
+ }
+}
+
+/**
+ * @brief Inserts a frame into the transmit queue.
+ *
+ * @param[in] canp pointer to the @p CANDriver object
+ * @param[in] ctfp pointer to the CAN frame to be transmitted
+ * @param[in] mailbox mailbox number, @p CAN_ANY_MAILBOX for any mailbox
+ *
+ * @notapi
+ */
+void can_lld_transmit(CANDriver *canp,
+ canmbx_t mailbox,
+ const CANTxFrame *ctfp) {
+ uint32_t tir;
+ CAN_TxMailBox_TypeDef *tmbp;
+
+ /* Pointer to a free transmission mailbox.*/
+ switch (mailbox) {
+ case CAN_ANY_MAILBOX:
+ tmbp = &canp->can->sTxMailBox[(canp->can->TSR & CAN_TSR_CODE) >> 24];
+ break;
+ case 1:
+ tmbp = &canp->can->sTxMailBox[0];
+ break;
+ case 2:
+ tmbp = &canp->can->sTxMailBox[1];
+ break;
+ case 3:
+ tmbp = &canp->can->sTxMailBox[2];
+ break;
+ default:
+ return;
+ }
+
+ /* Preparing the message.*/
+ if (ctfp->IDE)
+ tir = ((uint32_t)ctfp->EID << 3) | ((uint32_t)ctfp->RTR << 1) |
+ CAN_TI0R_IDE;
+ else
+ tir = ((uint32_t)ctfp->SID << 21) | ((uint32_t)ctfp->RTR << 1);
+ tmbp->TDTR = ctfp->DLC;
+ tmbp->TDLR = ctfp->data32[0];
+ tmbp->TDHR = ctfp->data32[1];
+ tmbp->TIR = tir | CAN_TI0R_TXRQ;
+}
+
+/**
+ * @brief Determines whether a frame has been received.
+ *
+ * @param[in] canp pointer to the @p CANDriver object
+ * @param[in] mailbox mailbox number, @p CAN_ANY_MAILBOX for any mailbox
+ *
+ * @return The queue space availability.
+ * @retval FALSE no space in the transmit queue.
+ * @retval TRUE transmit slot available.
+ *
+ * @notapi
+ */
+bool_t can_lld_is_rx_nonempty(CANDriver *canp, canmbx_t mailbox) {
+
+ switch (mailbox) {
+ case CAN_ANY_MAILBOX:
+ return ((canp->can->RF0R & CAN_RF0R_FMP0) != 0 ||
+ (canp->can->RF1R & CAN_RF1R_FMP1) != 0);
+ case 1:
+ return (canp->can->RF0R & CAN_RF0R_FMP0) != 0;
+ case 2:
+ return (canp->can->RF1R & CAN_RF1R_FMP1) != 0;
+ default:
+ return FALSE;
+ }
+}
+
+/**
+ * @brief Receives a frame from the input queue.
+ *
+ * @param[in] canp pointer to the @p CANDriver object
+ * @param[in] mailbox mailbox number, @p CAN_ANY_MAILBOX for any mailbox
+ * @param[out] crfp pointer to the buffer where the CAN frame is copied
+ *
+ * @notapi
+ */
+void can_lld_receive(CANDriver *canp,
+ canmbx_t mailbox,
+ CANRxFrame *crfp) {
+ uint32_t rir, rdtr;
+
+ if (mailbox == CAN_ANY_MAILBOX) {
+ if ((canp->can->RF0R & CAN_RF0R_FMP0) != 0)
+ mailbox = 1;
+ else if ((canp->can->RF1R & CAN_RF1R_FMP1) != 0)
+ mailbox = 2;
+ else {
+ /* Should not happen, do nothing.*/
+ return;
+ }
+ }
+ switch (mailbox) {
+ case 1:
+ /* Fetches the message.*/
+ rir = canp->can->sFIFOMailBox[0].RIR;
+ rdtr = canp->can->sFIFOMailBox[0].RDTR;
+ crfp->data32[0] = canp->can->sFIFOMailBox[0].RDLR;
+ crfp->data32[1] = canp->can->sFIFOMailBox[0].RDHR;
+
+ /* Releases the mailbox.*/
+ canp->can->RF0R = CAN_RF0R_RFOM0;
+
+ /* If the queue is empty re-enables the interrupt in order to generate
+ events again.*/
+ if ((canp->can->RF0R & CAN_RF0R_FMP0) == 0)
+ canp->can->IER |= CAN_IER_FMPIE0;
+ break;
+ case 2:
+ /* Fetches the message.*/
+ rir = canp->can->sFIFOMailBox[1].RIR;
+ rdtr = canp->can->sFIFOMailBox[1].RDTR;
+ crfp->data32[0] = canp->can->sFIFOMailBox[1].RDLR;
+ crfp->data32[1] = canp->can->sFIFOMailBox[1].RDHR;
+
+ /* Releases the mailbox.*/
+ canp->can->RF1R = CAN_RF1R_RFOM1;
+
+ /* If the queue is empty re-enables the interrupt in order to generate
+ events again.*/
+ if ((canp->can->RF1R & CAN_RF1R_FMP1) == 0)
+ canp->can->IER |= CAN_IER_FMPIE1;
+ break;
+ default:
+ /* Should not happen, do nothing.*/
+ return;
+ }
+
+ /* Decodes the various fields in the RX frame.*/
+ crfp->RTR = (rir & CAN_RI0R_RTR) >> 1;
+ crfp->IDE = (rir & CAN_RI0R_IDE) >> 2;
+ if (crfp->IDE)
+ crfp->EID = rir >> 3;
+ else
+ crfp->SID = rir >> 21;
+ crfp->DLC = rdtr & CAN_RDT0R_DLC;
+ crfp->FMI = (uint8_t)(rdtr >> 8);
+ crfp->TIME = (uint16_t)(rdtr >> 16);
+}
+
+#if CAN_USE_SLEEP_MODE || defined(__DOXYGEN__)
+/**
+ * @brief Enters the sleep mode.
+ *
+ * @param[in] canp pointer to the @p CANDriver object
+ *
+ * @notapi
+ */
+void can_lld_sleep(CANDriver *canp) {
+
+ canp->can->MCR |= CAN_MCR_SLEEP;
+}
+
+/**
+ * @brief Enforces leaving the sleep mode.
+ *
+ * @param[in] canp pointer to the @p CANDriver object
+ *
+ * @notapi
+ */
+void can_lld_wakeup(CANDriver *canp) {
+
+ canp->can->MCR &= ~CAN_MCR_SLEEP;
+}
+#endif /* CAN_USE_SLEEP_MODE */
+
+/**
+ * @brief Programs the filters.
+ * @note This is an STM32-specific API.
+ *
+ * @param[in] can2sb number of the first filter assigned to CAN2
+ * @param[in] num number of entries in the filters array, if zero then
+ * a default filter is programmed
+ * @param[in] cfp pointer to the filters array, can be @p NULL if
+ * (num == 0)
+ *
+ * @api
+ */
+void canSTM32SetFilters(uint32_t can2sb, uint32_t num, const CANFilter *cfp) {
+
+ osalDbgCheck((can2sb > 1) && (can2sb < STM32_CAN_MAX_FILTERS) &&
+ (num < STM32_CAN_MAX_FILTERS));
+
+#if STM32_CAN_USE_CAN1
+ osalDbgAssert(CAND1.state == CAN_STOP,
+ "canSTM32SetFilters(), #1", "invalid state");
+#endif
+#if STM32_CAN_USE_CAN2
+ osalDbgAssert(CAND2.state == CAN_STOP,
+ "canSTM32SetFilters(), #2", "invalid state");
+#endif
+
+ can_lld_set_filters(can2sb, num, cfp);
+}
+
+#endif /* HAL_USE_CAN */
+
+/** @} */
diff --git a/os/hal/platforms/STM32/can_lld.h b/os/hal/platforms/STM32/can_lld.h new file mode 100644 index 000000000..9f3797029 --- /dev/null +++ b/os/hal/platforms/STM32/can_lld.h @@ -0,0 +1,366 @@ +/*
+ ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+/**
+ * @file STM32/can_lld.h
+ * @brief STM32 CAN subsystem low level driver header.
+ *
+ * @addtogroup CAN
+ * @{
+ */
+
+#ifndef _CAN_LLD_H_
+#define _CAN_LLD_H_
+
+#if HAL_USE_CAN || defined(__DOXYGEN__)
+
+/*===========================================================================*/
+/* Driver constants. */
+/*===========================================================================*/
+
+/*
+ * The following macros from the ST header file are replaced with better
+ * equivalents.
+ */
+#undef CAN_BTR_BRP
+#undef CAN_BTR_TS1
+#undef CAN_BTR_TS2
+#undef CAN_BTR_SJW
+
+/**
+ * @brief This switch defines whether the driver implementation supports
+ * a low power switch mode with automatic an wakeup feature.
+ */
+#define CAN_SUPPORTS_SLEEP TRUE
+
+/**
+ * @brief This implementation supports three transmit mailboxes.
+ */
+#define CAN_TX_MAILBOXES 3
+
+/**
+ * @brief This implementation supports two receive mailboxes.
+ */
+#define CAN_RX_MAILBOXES 2
+
+/**
+ * @name CAN registers helper macros
+ * @{
+ */
+#define CAN_BTR_BRP(n) (n) /**< @brief BRP field macro.*/
+#define CAN_BTR_TS1(n) ((n) << 16) /**< @brief TS1 field macro.*/
+#define CAN_BTR_TS2(n) ((n) << 20) /**< @brief TS2 field macro.*/
+#define CAN_BTR_SJW(n) ((n) << 24) /**< @brief SJW field macro.*/
+
+#define CAN_IDE_STD 0 /**< @brief Standard id. */
+#define CAN_IDE_EXT 1 /**< @brief Extended id. */
+
+#define CAN_RTR_DATA 0 /**< @brief Data frame. */
+#define CAN_RTR_REMOTE 1 /**< @brief Remote frame. */
+/** @} */
+
+/*===========================================================================*/
+/* Driver pre-compile time settings. */
+/*===========================================================================*/
+
+/**
+ * @name Configuration options
+ * @{
+ */
+/**
+ * @brief CAN1 driver enable switch.
+ * @details If set to @p TRUE the support for CAN1 is included.
+ */
+#if !defined(STM32_CAN_USE_CAN1) || defined(__DOXYGEN__)
+#define STM32_CAN_USE_CAN1 FALSE
+#endif
+
+/**
+ * @brief CAN2 driver enable switch.
+ * @details If set to @p TRUE the support for CAN2 is included.
+ */
+#if !defined(STM32_CAN_USE_CAN2) || defined(__DOXYGEN__)
+#define STM32_CAN_USE_CAN2 FALSE
+#endif
+
+/**
+ * @brief CAN1 interrupt priority level setting.
+ */
+#if !defined(STM32_CAN_CAN1_IRQ_PRIORITY) || defined(__DOXYGEN__)
+#define STM32_CAN_CAN1_IRQ_PRIORITY 11
+#endif
+/** @} */
+
+/**
+ * @brief CAN2 interrupt priority level setting.
+ */
+#if !defined(STM32_CAN_CAN2_IRQ_PRIORITY) || defined(__DOXYGEN__)
+#define STM32_CAN_CAN2_IRQ_PRIORITY 11
+#endif
+/** @} */
+
+/*===========================================================================*/
+/* Derived constants and error checks. */
+/*===========================================================================*/
+
+#if STM32_CAN_USE_CAN1 && !STM32_HAS_CAN1
+#error "CAN1 not present in the selected device"
+#endif
+
+#if STM32_CAN_USE_CAN2 && !STM32_HAS_CAN2
+#error "CAN2 not present in the selected device"
+#endif
+
+#if !STM32_CAN_USE_CAN1 && !STM32_CAN_USE_CAN2
+#error "CAN driver activated but no CAN peripheral assigned"
+#endif
+
+#if !STM32_CAN_USE_CAN1 && STM32_CAN_USE_CAN2
+#error "CAN2 requires CAN1, it cannot operate independently"
+#endif
+
+#if CAN_USE_SLEEP_MODE && !CAN_SUPPORTS_SLEEP
+#error "CAN sleep mode not supported in this architecture"
+#endif
+
+/*===========================================================================*/
+/* Driver data structures and types. */
+/*===========================================================================*/
+
+/**
+ * @brief Type of a transmission mailbox index.
+ */
+typedef uint32_t canmbx_t;
+
+/**
+ * @brief CAN transmission frame.
+ * @note Accessing the frame data as word16 or word32 is not portable because
+ * machine data endianness, it can be still useful for a quick filling.
+ */
+typedef struct {
+ struct {
+ uint8_t DLC:4; /**< @brief Data length. */
+ uint8_t RTR:1; /**< @brief Frame type. */
+ uint8_t IDE:1; /**< @brief Identifier type. */
+ };
+ union {
+ struct {
+ uint32_t SID:11; /**< @brief Standard identifier.*/
+ };
+ struct {
+ uint32_t EID:29; /**< @brief Extended identifier.*/
+ };
+ };
+ union {
+ uint8_t data8[8]; /**< @brief Frame data. */
+ uint16_t data16[4]; /**< @brief Frame data. */
+ uint32_t data32[2]; /**< @brief Frame data. */
+ };
+} CANTxFrame;
+
+/**
+ * @brief CAN received frame.
+ * @note Accessing the frame data as word16 or word32 is not portable because
+ * machine data endianness, it can be still useful for a quick filling.
+ */
+typedef struct {
+ struct {
+ uint8_t FMI; /**< @brief Filter id. */
+ uint16_t TIME; /**< @brief Time stamp. */
+ };
+ struct {
+ uint8_t DLC:4; /**< @brief Data length. */
+ uint8_t RTR:1; /**< @brief Frame type. */
+ uint8_t IDE:1; /**< @brief Identifier type. */
+ };
+ union {
+ struct {
+ uint32_t SID:11; /**< @brief Standard identifier.*/
+ };
+ struct {
+ uint32_t EID:29; /**< @brief Extended identifier.*/
+ };
+ };
+ union {
+ uint8_t data8[8]; /**< @brief Frame data. */
+ uint16_t data16[4]; /**< @brief Frame data. */
+ uint32_t data32[2]; /**< @brief Frame data. */
+ };
+} CANRxFrame;
+
+/**
+ * @brief CAN filter.
+ * @note Refer to the STM32 reference manual for info about filters.
+ */
+typedef struct {
+ /**
+ * @brief Number of the filter to be programmed.
+ */
+ uint32_t filter;
+ /**
+ * @brief Filter mode.
+ * @note This bit represent the CAN_FM1R register bit associated to this
+ * filter (0=mask mode, 1=list mode).
+ */
+ uint32_t mode:1;
+ /**
+ * @brief Filter scale.
+ * @note This bit represent the CAN_FS1R register bit associated to this
+ * filter (0=16 bits mode, 1=32 bits mode).
+ */
+ uint32_t scale:1;
+ /**
+ * @brief Filter mode.
+ * @note This bit represent the CAN_FFA1R register bit associated to this
+ * filter, must be set to zero in this version of the driver.
+ */
+ uint32_t assignment:1;
+ /**
+ * @brief Filter register 1 (identifier).
+ */
+ uint32_t register1;
+ /**
+ * @brief Filter register 2 (mask/identifier depending on mode=0/1).
+ */
+ uint32_t register2;
+} CANFilter;
+
+/**
+ * @brief Driver configuration structure.
+ */
+typedef struct {
+ /**
+ * @brief CAN MCR register initialization data.
+ * @note Some bits in this register are enforced by the driver regardless
+ * their status in this field.
+ */
+ uint32_t mcr;
+ /**
+ * @brief CAN BTR register initialization data.
+ * @note Some bits in this register are enforced by the driver regardless
+ * their status in this field.
+ */
+ uint32_t btr;
+} CANConfig;
+
+/**
+ * @brief Structure representing an CAN driver.
+ */
+typedef struct {
+ /**
+ * @brief Driver state.
+ */
+ canstate_t state;
+ /**
+ * @brief Current configuration data.
+ */
+ const CANConfig *config;
+ /**
+ * @brief Transmission threads queue.
+ */
+ threads_queue_t txqueue;
+ /**
+ * @brief Receive threads queue.
+ */
+ threads_queue_t rxqueue;
+ /**
+ * @brief One or more frames become available.
+ * @note After broadcasting this event it will not be broadcasted again
+ * until the received frames queue has been completely emptied. It
+ * is <b>not</b> broadcasted for each received frame. It is
+ * responsibility of the application to empty the queue by
+ * repeatedly invoking @p chReceive() when listening to this event.
+ * This behavior minimizes the interrupt served by the system
+ * because CAN traffic.
+ * @note The flags associated to the listeners will indicate which
+ * receive mailboxes become non-empty.
+ */
+ event_source_t rxfull_event;
+ /**
+ * @brief One or more transmission mailbox become available.
+ * @note The flags associated to the listeners will indicate which
+ * transmit mailboxes become empty.
+ *
+ */
+ event_source_t txempty_event;
+ /**
+ * @brief A CAN bus error happened.
+ * @note The flags associated to the listeners will indicate the
+ * error(s) that have occurred.
+ */
+ event_source_t error_event;
+#if CAN_USE_SLEEP_MODE || defined (__DOXYGEN__)
+ /**
+ * @brief Entering sleep state event.
+ */
+ event_source_t sleep_event;
+ /**
+ * @brief Exiting sleep state event.
+ */
+ event_source_t wakeup_event;
+#endif /* CAN_USE_SLEEP_MODE */
+ /* End of the mandatory fields.*/
+ /**
+ * @brief Pointer to the CAN registers.
+ */
+ CAN_TypeDef *can;
+} CANDriver;
+
+/*===========================================================================*/
+/* Driver macros. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* External declarations. */
+/*===========================================================================*/
+
+#if STM32_CAN_USE_CAN1 && !defined(__DOXYGEN__)
+extern CANDriver CAND1;
+#endif
+
+#if STM32_CAN_USE_CAN2 && !defined(__DOXYGEN__)
+extern CANDriver CAND2;
+#endif
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+ void can_lld_init(void);
+ void can_lld_start(CANDriver *canp);
+ void can_lld_stop(CANDriver *canp);
+ bool_t can_lld_is_tx_empty(CANDriver *canp,
+ canmbx_t mailbox);
+ void can_lld_transmit(CANDriver *canp,
+ canmbx_t mailbox,
+ const CANTxFrame *crfp);
+ bool_t can_lld_is_rx_nonempty(CANDriver *canp,
+ canmbx_t mailbox);
+ void can_lld_receive(CANDriver *canp,
+ canmbx_t mailbox,
+ CANRxFrame *ctfp);
+#if CAN_USE_SLEEP_MODE
+ void can_lld_sleep(CANDriver *canp);
+ void can_lld_wakeup(CANDriver *canp);
+#endif /* CAN_USE_SLEEP_MODE */
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* HAL_USE_CAN */
+
+#endif /* _CAN_LLD_H_ */
+
+/** @} */
diff --git a/os/hal/platforms/STM32/ext_lld.c b/os/hal/platforms/STM32/ext_lld.c new file mode 100644 index 000000000..970e0ce8e --- /dev/null +++ b/os/hal/platforms/STM32/ext_lld.c @@ -0,0 +1,221 @@ +/*
+ ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+/**
+ * @file STM32/ext_lld.c
+ * @brief STM32 EXT subsystem low level driver source.
+ *
+ * @addtogroup EXT
+ * @{
+ */
+
+#include "ch.h"
+#include "hal.h"
+
+#if HAL_USE_EXT || defined(__DOXYGEN__)
+
+#include "ext_lld_isr.h"
+
+/*===========================================================================*/
+/* Driver local definitions. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver exported variables. */
+/*===========================================================================*/
+
+/**
+ * @brief EXTD1 driver identifier.
+ */
+EXTDriver EXTD1;
+
+/*===========================================================================*/
+/* Driver local variables and types. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver local functions. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver interrupt handlers. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver exported functions. */
+/*===========================================================================*/
+
+/**
+ * @brief Low level EXT driver initialization.
+ *
+ * @notapi
+ */
+void ext_lld_init(void) {
+
+ /* Driver initialization.*/
+ extObjectInit(&EXTD1);
+}
+
+/**
+ * @brief Configures and activates the EXT peripheral.
+ *
+ * @param[in] extp pointer to the @p EXTDriver object
+ *
+ * @notapi
+ */
+void ext_lld_start(EXTDriver *extp) {
+ unsigned i;
+
+ if (extp->state == EXT_STOP)
+ ext_lld_exti_irq_enable();
+
+ /* Configuration of automatic channels.*/
+ for (i = 0; i < EXT_MAX_CHANNELS; i++)
+ if (extp->config->channels[i].mode & EXT_CH_MODE_AUTOSTART)
+ ext_lld_channel_enable(extp, i);
+ else
+ ext_lld_channel_disable(extp, i);
+}
+
+/**
+ * @brief Deactivates the EXT peripheral.
+ *
+ * @param[in] extp pointer to the @p EXTDriver object
+ *
+ * @notapi
+ */
+void ext_lld_stop(EXTDriver *extp) {
+
+ if (extp->state == EXT_ACTIVE)
+ ext_lld_exti_irq_disable();
+
+ EXTI->EMR = 0;
+ EXTI->IMR = 0;
+ EXTI->PR = 0xFFFFFFFF;
+#if STM32_EXTI_NUM_CHANNELS > 32
+ EXTI->PR2 = 0xFFFFFFFF;
+#endif
+}
+
+/**
+ * @brief Enables an EXT channel.
+ *
+ * @param[in] extp pointer to the @p EXTDriver object
+ * @param[in] channel channel to be enabled
+ *
+ * @notapi
+ */
+void ext_lld_channel_enable(EXTDriver *extp, expchannel_t channel) {
+
+#if STM32_EXTI_NUM_CHANNELS > 32
+ if (channel < 32) {
+#endif
+ /* Programming edge registers.*/
+ if (extp->config->channels[channel].mode & EXT_CH_MODE_RISING_EDGE)
+ EXTI->RTSR |= (1 << channel);
+ else
+ EXTI->RTSR &= ~(1 << channel);
+ if (extp->config->channels[channel].mode & EXT_CH_MODE_FALLING_EDGE)
+ EXTI->FTSR |= (1 << channel);
+ else
+ EXTI->FTSR &= ~(1 << channel);
+
+ /* Programming interrupt and event registers.*/
+ if (extp->config->channels[channel].cb != NULL) {
+ EXTI->IMR |= (1 << channel);
+ EXTI->EMR &= ~(1 << channel);
+ }
+ else {
+ EXTI->EMR |= (1 << channel);
+ EXTI->IMR &= ~(1 << channel);
+ }
+#if STM32_EXTI_NUM_CHANNELS > 32
+ }
+ else {
+ /* Programming edge registers.*/
+ if (extp->config->channels[channel].mode & EXT_CH_MODE_RISING_EDGE)
+ EXTI->RTSR2 |= (1 << (32 - channel));
+ else
+ EXTI->RTSR2 &= ~(1 << (32 - channel));
+ if (extp->config->channels[channel].mode & EXT_CH_MODE_FALLING_EDGE)
+ EXTI->FTSR2 |= (1 << (32 - channel));
+ else
+ EXTI->FTSR2 &= ~(1 << (32 - channel));
+
+ /* Programming interrupt and event registers.*/
+ if (extp->config->channels[channel].cb != NULL) {
+ EXTI->IMR2 |= (1 << (32 - channel));
+ EXTI->EMR2 &= ~(1 << (32 - channel));
+ }
+ else {
+ EXTI->EMR2 |= (1 << (32 - channel));
+ EXTI->IMR2 &= ~(1 << (32 - channel));
+ }
+ }
+#endif
+
+ /* Setting the associated GPIO for external channels.*/
+ if (channel < 16) {
+ uint32_t n = channel >> 2;
+ uint32_t mask = ~(0xF << ((channel & 3) * 4));
+ uint32_t port = ((extp->config->channels[channel].mode &
+ EXT_MODE_GPIO_MASK) >>
+ EXT_MODE_GPIO_OFF) << ((channel & 3) * 4);
+
+#if defined(STM32L1XX_MD) || defined(STM32F0XX) || defined(STM32F2XX) || \
+ defined(STM32F30X) || defined(STM32F37X) || defined(STM32F4XX)
+ SYSCFG->EXTICR[n] = (SYSCFG->EXTICR[n] & mask) | port;
+#else /* STM32F1XX */
+ AFIO->EXTICR[n] = (AFIO->EXTICR[n] & mask) | port;
+#endif /* STM32F1XX */
+ }
+}
+
+/**
+ * @brief Disables an EXT channel.
+ *
+ * @param[in] extp pointer to the @p EXTDriver object
+ * @param[in] channel channel to be disabled
+ *
+ * @notapi
+ */
+void ext_lld_channel_disable(EXTDriver *extp, expchannel_t channel) {
+
+ (void)extp;
+
+#if STM32_EXTI_NUM_CHANNELS > 32
+ if (channel < 32) {
+#endif
+ EXTI->IMR &= ~(1 << channel);
+ EXTI->EMR &= ~(1 << channel);
+ EXTI->RTSR &= ~(1 << channel);
+ EXTI->FTSR &= ~(1 << channel);
+ EXTI->PR = (1 << channel);
+#if STM32_EXTI_NUM_CHANNELS > 32
+ }
+ else {
+ EXTI->IMR2 &= ~(1 << (32 - channel));
+ EXTI->EMR2 &= ~(1 << (32 - channel));
+ EXTI->RTSR2 &= ~(1 << (32 - channel));
+ EXTI->FTSR2 &= ~(1 << (32 - channel));
+ EXTI->PR2 = (1 << (32 - channel));
+ }
+#endif
+}
+
+#endif /* HAL_USE_EXT */
+
+/** @} */
diff --git a/os/hal/platforms/STM32/ext_lld.h b/os/hal/platforms/STM32/ext_lld.h new file mode 100644 index 000000000..7a59fa728 --- /dev/null +++ b/os/hal/platforms/STM32/ext_lld.h @@ -0,0 +1,153 @@ +/*
+ ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+/**
+ * @file STM32/ext_lld.h
+ * @brief STM32 EXT subsystem low level driver header.
+ *
+ * @addtogroup EXT
+ * @{
+ */
+
+#ifndef _EXT_LLD_H_
+#define _EXT_LLD_H_
+
+#if HAL_USE_EXT || defined(__DOXYGEN__)
+
+/*===========================================================================*/
+/* Driver constants. */
+/*===========================================================================*/
+
+/**
+ * @brief Available number of EXT channels.
+ */
+#define EXT_MAX_CHANNELS STM32_EXTI_NUM_CHANNELS
+
+/**
+ * @name STM32-specific EXT channel modes
+ * @{
+ */
+#define EXT_MODE_GPIO_MASK 0xF0 /**< @brief Port field mask. */
+#define EXT_MODE_GPIO_OFF 4 /**< @brief Port field offset. */
+#define EXT_MODE_GPIOA 0x00 /**< @brief GPIOA identifier. */
+#define EXT_MODE_GPIOB 0x10 /**< @brief GPIOB identifier. */
+#define EXT_MODE_GPIOC 0x20 /**< @brief GPIOC identifier. */
+#define EXT_MODE_GPIOD 0x30 /**< @brief GPIOD identifier. */
+#define EXT_MODE_GPIOE 0x40 /**< @brief GPIOE identifier. */
+#define EXT_MODE_GPIOF 0x50 /**< @brief GPIOF identifier. */
+#define EXT_MODE_GPIOG 0x60 /**< @brief GPIOG identifier. */
+#define EXT_MODE_GPIOH 0x70 /**< @brief GPIOH identifier. */
+#define EXT_MODE_GPIOI 0x80 /**< @brief GPIOI identifier. */
+/** @} */
+
+/*===========================================================================*/
+/* Driver pre-compile time settings. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Derived constants and error checks. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver data structures and types. */
+/*===========================================================================*/
+
+/**
+ * @brief EXT channel identifier.
+ */
+typedef uint32_t expchannel_t;
+
+/**
+ * @brief Type of an EXT generic notification callback.
+ *
+ * @param[in] extp pointer to the @p EXPDriver object triggering the
+ * callback
+ */
+typedef void (*extcallback_t)(EXTDriver *extp, expchannel_t channel);
+
+/**
+ * @brief Channel configuration structure.
+ */
+typedef struct {
+ /**
+ * @brief Channel mode.
+ */
+ uint32_t mode;
+ /**
+ * @brief Channel callback.
+ * @details In the STM32 implementation a @p NULL callback pointer is
+ * valid and configures the channel as an event sources instead
+ * of an interrupt source.
+ */
+ extcallback_t cb;
+} EXTChannelConfig;
+
+/**
+ * @brief Driver configuration structure.
+ * @note It could be empty on some architectures.
+ */
+typedef struct {
+ /**
+ * @brief Channel configurations.
+ */
+ EXTChannelConfig channels[EXT_MAX_CHANNELS];
+ /* End of the mandatory fields.*/
+} EXTConfig;
+
+/**
+ * @brief Structure representing an EXT driver.
+ */
+struct EXTDriver {
+ /**
+ * @brief Driver state.
+ */
+ extstate_t state;
+ /**
+ * @brief Current configuration data.
+ */
+ const EXTConfig *config;
+ /* End of the mandatory fields.*/
+};
+
+/*===========================================================================*/
+/* Driver macros. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* External declarations. */
+/*===========================================================================*/
+
+#if !defined(__DOXYGEN__)
+extern EXTDriver EXTD1;
+#endif
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+ void ext_lld_init(void);
+ void ext_lld_start(EXTDriver *extp);
+ void ext_lld_stop(EXTDriver *extp);
+ void ext_lld_channel_enable(EXTDriver *extp, expchannel_t channel);
+ void ext_lld_channel_disable(EXTDriver *extp, expchannel_t channel);
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* HAL_USE_EXT */
+
+#endif /* _EXT_LLD_H_ */
+
+/** @} */
diff --git a/os/hal/platforms/STM32/gpt_lld.c b/os/hal/platforms/STM32/gpt_lld.c new file mode 100644 index 000000000..35268fbe5 --- /dev/null +++ b/os/hal/platforms/STM32/gpt_lld.c @@ -0,0 +1,762 @@ +/*
+ ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+/**
+ * @file STM32/gpt_lld.c
+ * @brief STM32 GPT subsystem low level driver source.
+ *
+ * @addtogroup GPT
+ * @{
+ */
+
+#include "ch.h"
+#include "hal.h"
+
+#if HAL_USE_GPT || defined(__DOXYGEN__)
+
+/*===========================================================================*/
+/* Driver local definitions. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver exported variables. */
+/*===========================================================================*/
+
+/**
+ * @brief GPTD1 driver identifier.
+ * @note The driver GPTD1 allocates the complex timer TIM1 when enabled.
+ */
+#if STM32_GPT_USE_TIM1 || defined(__DOXYGEN__)
+GPTDriver GPTD1;
+#endif
+
+/**
+ * @brief GPTD2 driver identifier.
+ * @note The driver GPTD2 allocates the timer TIM2 when enabled.
+ */
+#if STM32_GPT_USE_TIM2 || defined(__DOXYGEN__)
+GPTDriver GPTD2;
+#endif
+
+/**
+ * @brief GPTD3 driver identifier.
+ * @note The driver GPTD3 allocates the timer TIM3 when enabled.
+ */
+#if STM32_GPT_USE_TIM3 || defined(__DOXYGEN__)
+GPTDriver GPTD3;
+#endif
+
+/**
+ * @brief GPTD4 driver identifier.
+ * @note The driver GPTD4 allocates the timer TIM4 when enabled.
+ */
+#if STM32_GPT_USE_TIM4 || defined(__DOXYGEN__)
+GPTDriver GPTD4;
+#endif
+
+/**
+ * @brief GPTD5 driver identifier.
+ * @note The driver GPTD5 allocates the timer TIM5 when enabled.
+ */
+#if STM32_GPT_USE_TIM5 || defined(__DOXYGEN__)
+GPTDriver GPTD5;
+#endif
+
+/**
+ * @brief GPTD6 driver identifier.
+ * @note The driver GPTD6 allocates the timer TIM6 when enabled.
+ */
+#if STM32_GPT_USE_TIM6 || defined(__DOXYGEN__)
+GPTDriver GPTD6;
+#endif
+
+/**
+ * @brief GPTD7 driver identifier.
+ * @note The driver GPTD7 allocates the timer TIM7 when enabled.
+ */
+#if STM32_GPT_USE_TIM7 || defined(__DOXYGEN__)
+GPTDriver GPTD7;
+#endif
+
+/**
+ * @brief GPTD8 driver identifier.
+ * @note The driver GPTD8 allocates the timer TIM8 when enabled.
+ */
+#if STM32_GPT_USE_TIM8 || defined(__DOXYGEN__)
+GPTDriver GPTD8;
+#endif
+
+/**
+ * @brief GPTD9 driver identifier.
+ * @note The driver GPTD9 allocates the timer TIM9 when enabled.
+ */
+#if STM32_GPT_USE_TIM9 || defined(__DOXYGEN__)
+GPTDriver GPTD9;
+#endif
+
+/**
+ * @brief GPTD11 driver identifier.
+ * @note The driver GPTD11 allocates the timer TIM11 when enabled.
+ */
+#if STM32_GPT_USE_TIM11 || defined(__DOXYGEN__)
+GPTDriver GPTD11;
+#endif
+
+/**
+ * @brief GPTD12 driver identifier.
+ * @note The driver GPTD12 allocates the timer TIM12 when enabled.
+ */
+#if STM32_GPT_USE_TIM12 || defined(__DOXYGEN__)
+GPTDriver GPTD12;
+#endif
+
+/**
+ * @brief GPTD14 driver identifier.
+ * @note The driver GPTD14 allocates the timer TIM14 when enabled.
+ */
+#if STM32_GPT_USE_TIM14 || defined(__DOXYGEN__)
+GPTDriver GPTD14;
+#endif
+
+/*===========================================================================*/
+/* Driver local variables and types. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver local functions. */
+/*===========================================================================*/
+
+/**
+ * @brief Shared IRQ handler.
+ *
+ * @param[in] gptp pointer to a @p GPTDriver object
+ */
+static void gpt_lld_serve_interrupt(GPTDriver *gptp) {
+
+ gptp->tim->SR = 0;
+ if (gptp->state == GPT_ONESHOT) {
+ gptp->state = GPT_READY; /* Back in GPT_READY state. */
+ gpt_lld_stop_timer(gptp); /* Timer automatically stopped. */
+ }
+ gptp->config->callback(gptp);
+}
+
+/*===========================================================================*/
+/* Driver interrupt handlers. */
+/*===========================================================================*/
+
+#if STM32_GPT_USE_TIM1
+#if !defined(STM32_TIM1_UP_HANDLER)
+#error "STM32_TIM1_UP_HANDLER not defined"
+#endif
+/**
+ * @brief TIM2 interrupt handler.
+ *
+ * @isr
+ */
+CH_IRQ_HANDLER(STM32_TIM1_UP_HANDLER) {
+
+ CH_IRQ_PROLOGUE();
+
+ gpt_lld_serve_interrupt(&GPTD1);
+
+ CH_IRQ_EPILOGUE();
+}
+#endif /* STM32_GPT_USE_TIM1 */
+
+#if STM32_GPT_USE_TIM2
+#if !defined(STM32_TIM2_HANDLER)
+#error "STM32_TIM2_HANDLER not defined"
+#endif
+/**
+ * @brief TIM2 interrupt handler.
+ *
+ * @isr
+ */
+CH_IRQ_HANDLER(STM32_TIM2_HANDLER) {
+
+ CH_IRQ_PROLOGUE();
+
+ gpt_lld_serve_interrupt(&GPTD2);
+
+ CH_IRQ_EPILOGUE();
+}
+#endif /* STM32_GPT_USE_TIM2 */
+
+#if STM32_GPT_USE_TIM3
+#if !defined(STM32_TIM3_HANDLER)
+#error "STM32_TIM3_HANDLER not defined"
+#endif
+/**
+ * @brief TIM3 interrupt handler.
+ *
+ * @isr
+ */
+CH_IRQ_HANDLER(STM32_TIM3_HANDLER) {
+
+ CH_IRQ_PROLOGUE();
+
+ gpt_lld_serve_interrupt(&GPTD3);
+
+ CH_IRQ_EPILOGUE();
+}
+#endif /* STM32_GPT_USE_TIM3 */
+
+#if STM32_GPT_USE_TIM4
+#if !defined(STM32_TIM4_HANDLER)
+#error "STM32_TIM4_HANDLER not defined"
+#endif
+/**
+ * @brief TIM4 interrupt handler.
+ *
+ * @isr
+ */
+CH_IRQ_HANDLER(STM32_TIM4_HANDLER) {
+
+ CH_IRQ_PROLOGUE();
+
+ gpt_lld_serve_interrupt(&GPTD4);
+
+ CH_IRQ_EPILOGUE();
+}
+#endif /* STM32_GPT_USE_TIM4 */
+
+#if STM32_GPT_USE_TIM5
+#if !defined(STM32_TIM5_HANDLER)
+#error "STM32_TIM5_HANDLER not defined"
+#endif
+/**
+ * @brief TIM5 interrupt handler.
+ *
+ * @isr
+ */
+CH_IRQ_HANDLER(STM32_TIM5_HANDLER) {
+
+ CH_IRQ_PROLOGUE();
+
+ gpt_lld_serve_interrupt(&GPTD5);
+
+ CH_IRQ_EPILOGUE();
+}
+#endif /* STM32_GPT_USE_TIM5 */
+
+#if STM32_GPT_USE_TIM6
+#if !defined(STM32_TIM6_HANDLER)
+#error "STM32_TIM6_HANDLER not defined"
+#endif
+/**
+ * @brief TIM6 interrupt handler.
+ *
+ * @isr
+ */
+CH_IRQ_HANDLER(STM32_TIM6_HANDLER) {
+
+ CH_IRQ_PROLOGUE();
+
+ gpt_lld_serve_interrupt(&GPTD6);
+
+ CH_IRQ_EPILOGUE();
+}
+#endif /* STM32_GPT_USE_TIM6 */
+
+#if STM32_GPT_USE_TIM7
+#if !defined(STM32_TIM7_HANDLER)
+#error "STM32_TIM7_HANDLER not defined"
+#endif
+/**
+ * @brief TIM7 interrupt handler.
+ *
+ * @isr
+ */
+CH_IRQ_HANDLER(STM32_TIM7_HANDLER) {
+
+ CH_IRQ_PROLOGUE();
+
+ gpt_lld_serve_interrupt(&GPTD7);
+
+ CH_IRQ_EPILOGUE();
+}
+#endif /* STM32_GPT_USE_TIM7 */
+
+#if STM32_GPT_USE_TIM8
+#if !defined(STM32_TIM8_UP_HANDLER)
+#error "STM32_TIM8_UP_HANDLER not defined"
+#endif
+/**
+ * @brief TIM8 interrupt handler.
+ *
+ * @isr
+ */
+CH_IRQ_HANDLER(STM32_TIM8_UP_HANDLER) {
+
+ CH_IRQ_PROLOGUE();
+
+ gpt_lld_serve_interrupt(&GPTD8);
+
+ CH_IRQ_EPILOGUE();
+}
+#endif /* STM32_GPT_USE_TIM8 */
+
+#if STM32_GPT_USE_TIM9
+#if !defined(STM32_TIM9_HANDLER)
+#error "STM32_TIM9_HANDLER not defined"
+#endif
+/**
+ * @brief TIM9 interrupt handler.
+ *
+ * @isr
+ */
+CH_IRQ_HANDLER(STM32_TIM9_HANDLER) {
+
+ CH_IRQ_PROLOGUE();
+
+ gpt_lld_serve_interrupt(&GPTD9);
+
+ CH_IRQ_EPILOGUE();
+}
+#endif /* STM32_GPT_USE_TIM9 */
+
+#if STM32_GPT_USE_TIM11
+#if !defined(STM32_TIM11_HANDLER)
+#error "STM32_TIM11_HANDLER not defined"
+#endif
+/**
+ * @brief TIM11 interrupt handler.
+ *
+ * @isr
+ */
+CH_IRQ_HANDLER(STM32_TIM11_HANDLER) {
+
+ CH_IRQ_PROLOGUE();
+
+ gpt_lld_serve_interrupt(&GPTD11);
+
+ CH_IRQ_EPILOGUE();
+}
+#endif /* STM32_GPT_USE_TIM11 */
+
+#if STM32_GPT_USE_TIM12
+#if !defined(STM32_TIM12_HANDLER)
+#error "STM32_TIM12_HANDLER not defined"
+#endif
+/**
+ * @brief TIM12 interrupt handler.
+ *
+ * @isr
+ */
+CH_IRQ_HANDLER(STM32_TIM12_HANDLER) {
+
+ CH_IRQ_PROLOGUE();
+
+ gpt_lld_serve_interrupt(&GPTD12);
+
+ CH_IRQ_EPILOGUE();
+}
+#endif /* STM32_GPT_USE_TIM12 */
+
+#if STM32_GPT_USE_TIM14
+#if !defined(STM32_TIM14_HANDLER)
+#error "STM32_TIM14_HANDLER not defined"
+#endif
+/**
+ * @brief TIM14 interrupt handler.
+ *
+ * @isr
+ */
+CH_IRQ_HANDLER(STM32_TIM14_HANDLER) {
+
+ CH_IRQ_PROLOGUE();
+
+ gpt_lld_serve_interrupt(&GPTD14);
+
+ CH_IRQ_EPILOGUE();
+}
+#endif /* STM32_GPT_USE_TIM14 */
+
+/*===========================================================================*/
+/* Driver exported functions. */
+/*===========================================================================*/
+
+/**
+ * @brief Low level GPT driver initialization.
+ *
+ * @notapi
+ */
+void gpt_lld_init(void) {
+
+#if STM32_GPT_USE_TIM1
+ /* Driver initialization.*/
+ GPTD1.tim = STM32_TIM1;
+ gptObjectInit(&GPTD1);
+#endif
+
+#if STM32_GPT_USE_TIM2
+ /* Driver initialization.*/
+ GPTD2.tim = STM32_TIM2;
+ gptObjectInit(&GPTD2);
+#endif
+
+#if STM32_GPT_USE_TIM3
+ /* Driver initialization.*/
+ GPTD3.tim = STM32_TIM3;
+ gptObjectInit(&GPTD3);
+#endif
+
+#if STM32_GPT_USE_TIM4
+ /* Driver initialization.*/
+ GPTD4.tim = STM32_TIM4;
+ gptObjectInit(&GPTD4);
+#endif
+
+#if STM32_GPT_USE_TIM5
+ /* Driver initialization.*/
+ GPTD5.tim = STM32_TIM5;
+ gptObjectInit(&GPTD5);
+#endif
+
+#if STM32_GPT_USE_TIM6
+ /* Driver initialization.*/
+ GPTD6.tim = STM32_TIM6;
+ gptObjectInit(&GPTD6);
+#endif
+
+#if STM32_GPT_USE_TIM7
+ /* Driver initialization.*/
+ GPTD7.tim = STM32_TIM7;
+ gptObjectInit(&GPTD7);
+#endif
+
+#if STM32_GPT_USE_TIM8
+ /* Driver initialization.*/
+ GPTD8.tim = STM32_TIM8;
+ gptObjectInit(&GPTD8);
+#endif
+
+#if STM32_GPT_USE_TIM9
+ /* Driver initialization.*/
+ GPTD9.tim = STM32_TIM9;
+ gptObjectInit(&GPTD9);
+#endif
+
+#if STM32_GPT_USE_TIM11
+ /* Driver initialization.*/
+ GPTD11.tim = STM32_TIM11;
+ gptObjectInit(&GPTD11);
+#endif
+
+#if STM32_GPT_USE_TIM12
+ /* Driver initialization.*/
+ GPTD12.tim = STM32_TIM12;
+ gptObjectInit(&GPTD12);
+#endif
+
+#if STM32_GPT_USE_TIM14
+ /* Driver initialization.*/
+ GPTD14.tim = STM32_TIM14;
+ gptObjectInit(&GPTD14);
+#endif
+}
+
+/**
+ * @brief Configures and activates the GPT peripheral.
+ *
+ * @param[in] gptp pointer to the @p GPTDriver object
+ *
+ * @notapi
+ */
+void gpt_lld_start(GPTDriver *gptp) {
+ uint16_t psc;
+
+ if (gptp->state == GPT_STOP) {
+ /* Clock activation.*/
+#if STM32_GPT_USE_TIM1
+ if (&GPTD1 == gptp) {
+ rccEnableTIM1(FALSE);
+ rccResetTIM1();
+ nvicEnableVector(STM32_TIM1_UP_NUMBER,
+ CORTEX_PRIORITY_MASK(STM32_GPT_TIM1_IRQ_PRIORITY));
+ gptp->clock = STM32_TIMCLK2;
+ }
+#endif
+#if STM32_GPT_USE_TIM2
+ if (&GPTD2 == gptp) {
+ rccEnableTIM2(FALSE);
+ rccResetTIM2();
+ nvicEnableVector(STM32_TIM2_NUMBER,
+ CORTEX_PRIORITY_MASK(STM32_GPT_TIM2_IRQ_PRIORITY));
+ gptp->clock = STM32_TIMCLK1;
+ }
+#endif
+#if STM32_GPT_USE_TIM3
+ if (&GPTD3 == gptp) {
+ rccEnableTIM3(FALSE);
+ rccResetTIM3();
+ nvicEnableVector(STM32_TIM3_NUMBER,
+ CORTEX_PRIORITY_MASK(STM32_GPT_TIM3_IRQ_PRIORITY));
+ gptp->clock = STM32_TIMCLK1;
+ }
+#endif
+#if STM32_GPT_USE_TIM4
+ if (&GPTD4 == gptp) {
+ rccEnableTIM4(FALSE);
+ rccResetTIM4();
+ nvicEnableVector(STM32_TIM4_NUMBER,
+ CORTEX_PRIORITY_MASK(STM32_GPT_TIM4_IRQ_PRIORITY));
+ gptp->clock = STM32_TIMCLK1;
+ }
+#endif
+
+#if STM32_GPT_USE_TIM5
+ if (&GPTD5 == gptp) {
+ rccEnableTIM5(FALSE);
+ rccResetTIM5();
+ nvicEnableVector(STM32_TIM5_NUMBER,
+ CORTEX_PRIORITY_MASK(STM32_GPT_TIM5_IRQ_PRIORITY));
+ gptp->clock = STM32_TIMCLK1;
+ }
+#endif
+
+#if STM32_GPT_USE_TIM6
+ if (&GPTD6 == gptp) {
+ rccEnableTIM6(FALSE);
+ rccResetTIM6();
+ nvicEnableVector(STM32_TIM6_NUMBER,
+ CORTEX_PRIORITY_MASK(STM32_GPT_TIM6_IRQ_PRIORITY));
+ gptp->clock = STM32_TIMCLK1;
+ }
+#endif
+
+#if STM32_GPT_USE_TIM7
+ if (&GPTD7 == gptp) {
+ rccEnableTIM7(FALSE);
+ rccResetTIM7();
+ nvicEnableVector(STM32_TIM7_NUMBER,
+ CORTEX_PRIORITY_MASK(STM32_GPT_TIM7_IRQ_PRIORITY));
+ gptp->clock = STM32_TIMCLK1;
+ }
+#endif
+
+#if STM32_GPT_USE_TIM8
+ if (&GPTD8 == gptp) {
+ rccEnableTIM8(FALSE);
+ rccResetTIM8();
+ nvicEnableVector(STM32_TIM8_UP_NUMBER,
+ CORTEX_PRIORITY_MASK(STM32_GPT_TIM8_IRQ_PRIORITY));
+ gptp->clock = STM32_TIMCLK2;
+ }
+#endif
+
+#if STM32_GPT_USE_TIM9
+ if (&GPTD9 == gptp) {
+ rccEnableTIM9(FALSE);
+ rccResetTIM9();
+ nvicEnableVector(STM32_TIM9_NUMBER,
+ CORTEX_PRIORITY_MASK(STM32_GPT_TIM9_IRQ_PRIORITY));
+ gptp->clock = STM32_TIMCLK2;
+ }
+#endif
+
+#if STM32_GPT_USE_TIM11
+ if (&GPTD11 == gptp) {
+ rccEnableTIM11(FALSE);
+ rccResetTIM11();
+ nvicEnableVector(STM32_TIM11_NUMBER,
+ CORTEX_PRIORITY_MASK(STM32_GPT_TIM11_IRQ_PRIORITY));
+ gptp->clock = STM32_TIMCLK2;
+ }
+#endif
+
+#if STM32_GPT_USE_TIM12
+ if (&GPTD12 == gptp) {
+ rccEnableTIM12(FALSE);
+ rccResetTIM12();
+ nvicEnableVector(STM32_TIM12_NUMBER,
+ CORTEX_PRIORITY_MASK(STM32_GPT_TIM12_IRQ_PRIORITY));
+ gptp->clock = STM32_TIMCLK1;
+ }
+#endif
+
+#if STM32_GPT_USE_TIM14
+ if (&GPTD14 == gptp) {
+ rccEnableTIM14(FALSE);
+ rccResetTIM14();
+ nvicEnableVector(STM32_TIM14_NUMBER,
+ CORTEX_PRIORITY_MASK(STM32_GPT_TIM14_IRQ_PRIORITY));
+ gptp->clock = STM32_TIMCLK1;
+ }
+#endif
+ }
+
+ /* Prescaler value calculation.*/
+ psc = (uint16_t)((gptp->clock / gptp->config->frequency) - 1);
+ chDbgAssert(((uint32_t)(psc + 1) * gptp->config->frequency) == gptp->clock,
+ "gpt_lld_start(), #1", "invalid frequency");
+
+ /* Timer configuration.*/
+ gptp->tim->CR1 = 0; /* Initially stopped. */
+ gptp->tim->CR2 = TIM_CR2_CCDS; /* DMA on UE (if any). */
+ gptp->tim->PSC = psc; /* Prescaler value. */
+ gptp->tim->DIER = 0;
+}
+
+/**
+ * @brief Deactivates the GPT peripheral.
+ *
+ * @param[in] gptp pointer to the @p GPTDriver object
+ *
+ * @notapi
+ */
+void gpt_lld_stop(GPTDriver *gptp) {
+
+ if (gptp->state == GPT_READY) {
+ gptp->tim->CR1 = 0; /* Timer disabled. */
+ gptp->tim->DIER = 0; /* All IRQs disabled. */
+ gptp->tim->SR = 0; /* Clear eventual pending IRQs. */
+
+#if STM32_GPT_USE_TIM1
+ if (&GPTD1 == gptp) {
+ nvicDisableVector(STM32_TIM1_UP_NUMBER);
+ rccDisableTIM1(FALSE);
+ }
+#endif
+#if STM32_GPT_USE_TIM2
+ if (&GPTD2 == gptp) {
+ nvicDisableVector(STM32_TIM2_NUMBER);
+ rccDisableTIM2(FALSE);
+ }
+#endif
+#if STM32_GPT_USE_TIM3
+ if (&GPTD3 == gptp) {
+ nvicDisableVector(STM32_TIM3_NUMBER);
+ rccDisableTIM3(FALSE);
+ }
+#endif
+#if STM32_GPT_USE_TIM4
+ if (&GPTD4 == gptp) {
+ nvicDisableVector(STM32_TIM4_NUMBER);
+ rccDisableTIM4(FALSE);
+ }
+#endif
+#if STM32_GPT_USE_TIM5
+ if (&GPTD5 == gptp) {
+ nvicDisableVector(STM32_TIM5_NUMBER);
+ rccDisableTIM5(FALSE);
+ }
+#endif
+#if STM32_GPT_USE_TIM6
+ if (&GPTD6 == gptp) {
+ nvicDisableVector(STM32_TIM6_NUMBER);
+ rccDisableTIM6(FALSE);
+ }
+#endif
+#if STM32_GPT_USE_TIM7
+ if (&GPTD7 == gptp) {
+ nvicDisableVector(STM32_TIM7_NUMBER);
+ rccDisableTIM7(FALSE);
+ }
+#endif
+#if STM32_GPT_USE_TIM8
+ if (&GPTD8 == gptp) {
+ nvicDisableVector(STM32_TIM8_UP_NUMBER);
+ rccDisableTIM8(FALSE);
+ }
+#endif
+#if STM32_GPT_USE_TIM9
+ if (&GPTD9 == gptp) {
+ nvicDisableVector(STM32_TIM9_NUMBER);
+ rccDisableTIM9(FALSE);
+ }
+#endif
+#if STM32_GPT_USE_TIM11
+ if (&GPTD11 == gptp) {
+ nvicDisableVector(STM32_TIM11_NUMBER);
+ rccDisableTIM11(FALSE);
+ }
+#endif
+#if STM32_GPT_USE_TIM12
+ if (&GPTD12 == gptp) {
+ nvicDisableVector(STM32_TIM12_NUMBER);
+ rccDisableTIM12(FALSE);
+ }
+#endif
+#if STM32_GPT_USE_TIM14
+ if (&GPTD14 == gptp) {
+ nvicDisableVector(STM32_TIM14_NUMBER);
+ rccDisableTIM14(FALSE);
+ }
+#endif
+ }
+}
+
+/**
+ * @brief Starts the timer in continuous mode.
+ *
+ * @param[in] gptp pointer to the @p GPTDriver object
+ * @param[in] interval period in ticks
+ *
+ * @notapi
+ */
+void gpt_lld_start_timer(GPTDriver *gptp, gptcnt_t interval) {
+
+ gptp->tim->ARR = interval - 1; /* Time constant. */
+ gptp->tim->EGR = TIM_EGR_UG; /* Update event. */
+ gptp->tim->CNT = 0; /* Reset counter. */
+ /* NOTE: After generating the UG event it takes several clock cycles before
+ SR bit 0 goes to 1. This is because the clearing of CNT has been inserted
+ before the clearing of SR, to give it some time.*/
+ gptp->tim->SR = 0; /* Clear pending IRQs (if any). */
+ gptp->tim->DIER = TIM_DIER_UIE; /* Update Event IRQ enabled. */
+ gptp->tim->CR1 = TIM_CR1_URS | TIM_CR1_CEN;
+}
+
+/**
+ * @brief Stops the timer.
+ *
+ * @param[in] gptp pointer to the @p GPTDriver object
+ *
+ * @notapi
+ */
+void gpt_lld_stop_timer(GPTDriver *gptp) {
+
+ gptp->tim->CR1 = 0; /* Initially stopped. */
+ gptp->tim->SR = 0; /* Clear pending IRQs (if any). */
+ gptp->tim->DIER = 0; /* Interrupts disabled. */
+}
+
+/**
+ * @brief Starts the timer in one shot mode and waits for completion.
+ * @details This function specifically polls the timer waiting for completion
+ * in order to not have extra delays caused by interrupt servicing,
+ * this function is only recommended for short delays.
+ *
+ * @param[in] gptp pointer to the @p GPTDriver object
+ * @param[in] interval time interval in ticks
+ *
+ * @notapi
+ */
+void gpt_lld_polled_delay(GPTDriver *gptp, gptcnt_t interval) {
+
+ gptp->tim->ARR = interval - 1; /* Time constant. */
+ gptp->tim->EGR = TIM_EGR_UG; /* Update event. */
+ gptp->tim->SR = 0; /* Clear pending IRQs (if any). */
+ gptp->tim->CR1 = TIM_CR1_OPM | TIM_CR1_URS | TIM_CR1_CEN;
+ while (!(gptp->tim->SR & TIM_SR_UIF))
+ ;
+}
+
+#endif /* HAL_USE_GPT */
+
+/** @} */
diff --git a/os/hal/platforms/STM32/gpt_lld.h b/os/hal/platforms/STM32/gpt_lld.h new file mode 100644 index 000000000..ecb1dcb35 --- /dev/null +++ b/os/hal/platforms/STM32/gpt_lld.h @@ -0,0 +1,504 @@ +/*
+ ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+/**
+ * @file STM32/gpt_lld.h
+ * @brief STM32 GPT subsystem low level driver header.
+ *
+ * @addtogroup GPT
+ * @{
+ */
+
+#ifndef _GPT_LLD_H_
+#define _GPT_LLD_H_
+
+#if HAL_USE_GPT || defined(__DOXYGEN__)
+
+/*===========================================================================*/
+/* Driver constants. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver pre-compile time settings. */
+/*===========================================================================*/
+
+/**
+ * @name Configuration options
+ * @{
+ */
+/**
+ * @brief GPTD1 driver enable switch.
+ * @details If set to @p TRUE the support for GPTD1 is included.
+ * @note The default is @p TRUE.
+ */
+#if !defined(STM32_GPT_USE_TIM1) || defined(__DOXYGEN__)
+#define STM32_GPT_USE_TIM1 FALSE
+#endif
+
+/**
+ * @brief GPTD2 driver enable switch.
+ * @details If set to @p TRUE the support for GPTD2 is included.
+ * @note The default is @p TRUE.
+ */
+#if !defined(STM32_GPT_USE_TIM2) || defined(__DOXYGEN__)
+#define STM32_GPT_USE_TIM2 FALSE
+#endif
+
+/**
+ * @brief GPTD3 driver enable switch.
+ * @details If set to @p TRUE the support for GPTD3 is included.
+ * @note The default is @p TRUE.
+ */
+#if !defined(STM32_GPT_USE_TIM3) || defined(__DOXYGEN__)
+#define STM32_GPT_USE_TIM3 FALSE
+#endif
+
+/**
+ * @brief GPTD4 driver enable switch.
+ * @details If set to @p TRUE the support for GPTD4 is included.
+ * @note The default is @p TRUE.
+ */
+#if !defined(STM32_GPT_USE_TIM4) || defined(__DOXYGEN__)
+#define STM32_GPT_USE_TIM4 FALSE
+#endif
+
+/**
+ * @brief GPTD5 driver enable switch.
+ * @details If set to @p TRUE the support for GPTD5 is included.
+ * @note The default is @p TRUE.
+ */
+#if !defined(STM32_GPT_USE_TIM5) || defined(__DOXYGEN__)
+#define STM32_GPT_USE_TIM5 FALSE
+#endif
+
+/**
+ * @brief GPTD6 driver enable switch.
+ * @details If set to @p TRUE the support for GPTD6 is included.
+ * @note The default is @p TRUE.
+ */
+#if !defined(STM32_GPT_USE_TIM6) || defined(__DOXYGEN__)
+#define STM32_GPT_USE_TIM6 FALSE
+#endif
+
+/**
+ * @brief GPTD7 driver enable switch.
+ * @details If set to @p TRUE the support for GPTD7 is included.
+ * @note The default is @p TRUE.
+ */
+#if !defined(STM32_GPT_USE_TIM7) || defined(__DOXYGEN__)
+#define STM32_GPT_USE_TIM7 FALSE
+#endif
+
+/**
+ * @brief GPTD8 driver enable switch.
+ * @details If set to @p TRUE the support for GPTD8 is included.
+ * @note The default is @p TRUE.
+ */
+#if !defined(STM32_GPT_USE_TIM8) || defined(__DOXYGEN__)
+#define STM32_GPT_USE_TIM8 FALSE
+#endif
+
+/**
+ * @brief GPTD9 driver enable switch.
+ * @details If set to @p TRUE the support for GPTD9 is included.
+ * @note The default is @p TRUE.
+ */
+#if !defined(STM32_GPT_USE_TIM9) || defined(__DOXYGEN__)
+#define STM32_GPT_USE_TIM9 FALSE
+#endif
+
+/**
+ * @brief GPTD11 driver enable switch.
+ * @details If set to @p TRUE the support for GPTD11 is included.
+ * @note The default is @p TRUE.
+ */
+#if !defined(STM32_GPT_USE_TIM11) || defined(__DOXYGEN__)
+#define STM32_GPT_USE_TIM11 FALSE
+#endif
+
+/**
+ * @brief GPTD12 driver enable switch.
+ * @details If set to @p TRUE the support for GPTD12 is included.
+ * @note The default is @p TRUE.
+ */
+#if !defined(STM32_GPT_USE_TIM12) || defined(__DOXYGEN__)
+#define STM32_GPT_USE_TIM12 FALSE
+#endif
+
+/**
+ * @brief GPTD14 driver enable switch.
+ * @details If set to @p TRUE the support for GPTD14 is included.
+ * @note The default is @p TRUE.
+ */
+#if !defined(STM32_GPT_USE_TIM14) || defined(__DOXYGEN__)
+#define STM32_GPT_USE_TIM14 FALSE
+#endif
+
+/**
+ * @brief GPTD1 interrupt priority level setting.
+ */
+#if !defined(STM32_GPT_TIM1_IRQ_PRIORITY) || defined(__DOXYGEN__)
+#define STM32_GPT_TIM1_IRQ_PRIORITY 7
+#endif
+
+/**
+ * @brief GPTD2 interrupt priority level setting.
+ */
+#if !defined(STM32_GPT_TIM2_IRQ_PRIORITY) || defined(__DOXYGEN__)
+#define STM32_GPT_TIM2_IRQ_PRIORITY 7
+#endif
+
+/**
+ * @brief GPTD3 interrupt priority level setting.
+ */
+#if !defined(STM32_GPT_TIM3_IRQ_PRIORITY) || defined(__DOXYGEN__)
+#define STM32_GPT_TIM3_IRQ_PRIORITY 7
+#endif
+
+/**
+ * @brief GPTD4 interrupt priority level setting.
+ */
+#if !defined(STM32_GPT_TIM4_IRQ_PRIORITY) || defined(__DOXYGEN__)
+#define STM32_GPT_TIM4_IRQ_PRIORITY 7
+#endif
+
+/**
+ * @brief GPTD5 interrupt priority level setting.
+ */
+#if !defined(STM32_GPT_TIM5_IRQ_PRIORITY) || defined(__DOXYGEN__)
+#define STM32_GPT_TIM5_IRQ_PRIORITY 7
+#endif
+
+/**
+ * @brief GPTD6 interrupt priority level setting.
+ */
+#if !defined(STM32_GPT_TIM6_IRQ_PRIORITY) || defined(__DOXYGEN__)
+#define STM32_GPT_TIM6_IRQ_PRIORITY 7
+#endif
+
+/**
+ * @brief GPTD7 interrupt priority level setting.
+ */
+#if !defined(STM32_GPT_TIM7_IRQ_PRIORITY) || defined(__DOXYGEN__)
+#define STM32_GPT_TIM7_IRQ_PRIORITY 7
+#endif
+
+/**
+ * @brief GPTD8 interrupt priority level setting.
+ */
+#if !defined(STM32_GPT_TIM8_IRQ_PRIORITY) || defined(__DOXYGEN__)
+#define STM32_GPT_TIM8_IRQ_PRIORITY 7
+#endif
+
+/**
+ * @brief GPTD9 interrupt priority level setting.
+ */
+#if !defined(STM32_GPT_TIM9_IRQ_PRIORITY) || defined(__DOXYGEN__)
+#define STM32_GPT_TIM9_IRQ_PRIORITY 7
+#endif
+
+/**
+ * @brief GPTD11 interrupt priority level setting.
+ */
+#if !defined(STM32_GPT_TIM11_IRQ_PRIORITY) || defined(__DOXYGEN__)
+#define STM32_GPT_TIM11_IRQ_PRIORITY 7
+#endif
+
+/**
+ * @brief GPTD12 interrupt priority level setting.
+ */
+#if !defined(STM32_GPT_TIM12_IRQ_PRIORITY) || defined(__DOXYGEN__)
+#define STM32_GPT_TIM12_IRQ_PRIORITY 7
+#endif
+
+/**
+ * @brief GPTD14 interrupt priority level setting.
+ */
+#if !defined(STM32_GPT_TIM14_IRQ_PRIORITY) || defined(__DOXYGEN__)
+#define STM32_GPT_TIM14_IRQ_PRIORITY 7
+#endif
+/** @} */
+
+/*===========================================================================*/
+/* Derived constants and error checks. */
+/*===========================================================================*/
+
+#if STM32_GPT_USE_TIM1 && !STM32_HAS_TIM1
+#error "TIM1 not present in the selected device"
+#endif
+
+#if STM32_GPT_USE_TIM2 && !STM32_HAS_TIM2
+#error "TIM2 not present in the selected device"
+#endif
+
+#if STM32_GPT_USE_TIM3 && !STM32_HAS_TIM3
+#error "TIM3 not present in the selected device"
+#endif
+
+#if STM32_GPT_USE_TIM4 && !STM32_HAS_TIM4
+#error "TIM4 not present in the selected device"
+#endif
+
+#if STM32_GPT_USE_TIM5 && !STM32_HAS_TIM5
+#error "TIM5 not present in the selected device"
+#endif
+
+#if STM32_GPT_USE_TIM6 && !STM32_HAS_TIM6
+#error "TIM6 not present in the selected device"
+#endif
+
+#if STM32_GPT_USE_TIM7 && !STM32_HAS_TIM7
+#error "TIM7 not present in the selected device"
+#endif
+
+#if STM32_GPT_USE_TIM8 && !STM32_HAS_TIM8
+#error "TIM8 not present in the selected device"
+#endif
+
+#if STM32_GPT_USE_TIM9 && !STM32_HAS_TIM9
+#error "TIM9 not present in the selected device"
+#endif
+
+#if STM32_GPT_USE_TIM11 && !STM32_HAS_TIM11
+#error "TIM11 not present in the selected device"
+#endif
+
+#if STM32_GPT_USE_TIM12 && !STM32_HAS_TIM12
+#error "TIM12 not present in the selected device"
+#endif
+
+#if STM32_GPT_USE_TIM14 && !STM32_HAS_TIM14
+#error "TIM14 not present in the selected device"
+#endif
+
+#if !STM32_GPT_USE_TIM1 && !STM32_GPT_USE_TIM2 && \
+ !STM32_GPT_USE_TIM3 && !STM32_GPT_USE_TIM4 && \
+ !STM32_GPT_USE_TIM5 && !STM32_GPT_USE_TIM6 && \
+ !STM32_GPT_USE_TIM7 && !STM32_GPT_USE_TIM8 && \
+ !STM32_GPT_USE_TIM9 && !STM32_GPT_USE_TIM11 && \
+ !STM32_GPT_USE_TIM12 && !STM32_GPT_USE_TIM14
+#error "GPT driver activated but no TIM peripheral assigned"
+#endif
+
+#if STM32_GPT_USE_TIM1 && \
+ !CORTEX_IS_VALID_KERNEL_PRIORITY(STM32_GPT_TIM1_IRQ_PRIORITY)
+#error "Invalid IRQ priority assigned to TIM1"
+#endif
+
+#if STM32_GPT_USE_TIM2 && \
+ !CORTEX_IS_VALID_KERNEL_PRIORITY(STM32_GPT_TIM2_IRQ_PRIORITY)
+#error "Invalid IRQ priority assigned to TIM2"
+#endif
+
+#if STM32_GPT_USE_TIM3 && \
+ !CORTEX_IS_VALID_KERNEL_PRIORITY(STM32_GPT_TIM3_IRQ_PRIORITY)
+#error "Invalid IRQ priority assigned to TIM3"
+#endif
+
+#if STM32_GPT_USE_TIM4 && \
+ !CORTEX_IS_VALID_KERNEL_PRIORITY(STM32_GPT_TIM4_IRQ_PRIORITY)
+#error "Invalid IRQ priority assigned to TIM4"
+#endif
+
+#if STM32_GPT_USE_TIM5 && \
+ !CORTEX_IS_VALID_KERNEL_PRIORITY(STM32_GPT_TIM5_IRQ_PRIORITY)
+#error "Invalid IRQ priority assigned to TIM5"
+#endif
+
+#if STM32_GPT_USE_TIM6 && \
+ !CORTEX_IS_VALID_KERNEL_PRIORITY(STM32_GPT_TIM6_IRQ_PRIORITY)
+#error "Invalid IRQ priority assigned to TIM6"
+#endif
+
+#if STM32_GPT_USE_TIM7 && \
+ !CORTEX_IS_VALID_KERNEL_PRIORITY(STM32_GPT_TIM7_IRQ_PRIORITY)
+#error "Invalid IRQ priority assigned to TIM7"
+#endif
+
+#if STM32_GPT_USE_TIM8 && \
+ !CORTEX_IS_VALID_KERNEL_PRIORITY(STM32_GPT_TIM8_IRQ_PRIORITY)
+#error "Invalid IRQ priority assigned to TIM8"
+#endif
+
+#if STM32_GPT_USE_TIM9 && \
+ !CORTEX_IS_VALID_KERNEL_PRIORITY(STM32_GPT_TIM9_IRQ_PRIORITY)
+#error "Invalid IRQ priority assigned to TIM9"
+#endif
+
+#if STM32_GPT_USE_TIM11 && \
+ !CORTEX_IS_VALID_KERNEL_PRIORITY(STM32_GPT_TIM11_IRQ_PRIORITY)
+#error "Invalid IRQ priority assigned to TIM11"
+#endif
+
+#if STM32_GPT_USE_TIM12 && \
+ !CORTEX_IS_VALID_KERNEL_PRIORITY(STM32_GPT_TIM12_IRQ_PRIORITY)
+#error "Invalid IRQ priority assigned to TIM12"
+#endif
+
+#if STM32_GPT_USE_TIM14 && \
+ !CORTEX_IS_VALID_KERNEL_PRIORITY(STM32_GPT_TIM14_IRQ_PRIORITY)
+#error "Invalid IRQ priority assigned to TIM14"
+#endif
+
+/*===========================================================================*/
+/* Driver data structures and types. */
+/*===========================================================================*/
+
+/**
+ * @brief GPT frequency type.
+ */
+typedef uint32_t gptfreq_t;
+
+/**
+ * @brief GPT counter type.
+ */
+typedef uint16_t gptcnt_t;
+
+/**
+ * @brief Driver configuration structure.
+ * @note It could be empty on some architectures.
+ */
+typedef struct {
+ /**
+ * @brief Timer clock in Hz.
+ * @note The low level can use assertions in order to catch invalid
+ * frequency specifications.
+ */
+ gptfreq_t frequency;
+ /**
+ * @brief Timer callback pointer.
+ * @note This callback is invoked on GPT counter events.
+ */
+ gptcallback_t callback;
+ /* End of the mandatory fields.*/
+} GPTConfig;
+
+/**
+ * @brief Structure representing a GPT driver.
+ */
+struct GPTDriver {
+ /**
+ * @brief Driver state.
+ */
+ gptstate_t state;
+ /**
+ * @brief Current configuration data.
+ */
+ const GPTConfig *config;
+#if defined(GPT_DRIVER_EXT_FIELDS)
+ GPT_DRIVER_EXT_FIELDS
+#endif
+ /* End of the mandatory fields.*/
+ /**
+ * @brief Timer base clock.
+ */
+ uint32_t clock;
+ /**
+ * @brief Pointer to the TIMx registers block.
+ */
+ stm32_tim_t *tim;
+};
+
+/*===========================================================================*/
+/* Driver macros. */
+/*===========================================================================*/
+
+/**
+ * @brief Changes the interval of GPT peripheral.
+ * @details This function changes the interval of a running GPT unit.
+ * @pre The GPT unit must have been activated using @p gptStart().
+ * @pre The GPT unit must have been running in continuous mode using
+ * @p gptStartContinuous().
+ * @post The GPT unit interval is changed to the new value.
+ * @note The function has effect at the next cycle start.
+ *
+ * @param[in] gptp pointer to a @p GPTDriver object
+ * @param[in] interval new cycle time in timer ticks
+ * @notapi
+ */
+#define gpt_lld_change_interval(gptp, interval) \
+ ((gptp)->tim->ARR = (uint16_t)((interval) - 1))
+
+/*===========================================================================*/
+/* External declarations. */
+/*===========================================================================*/
+
+#if STM32_GPT_USE_TIM1 && !defined(__DOXYGEN__)
+extern GPTDriver GPTD1;
+#endif
+
+#if STM32_GPT_USE_TIM2 && !defined(__DOXYGEN__)
+extern GPTDriver GPTD2;
+#endif
+
+#if STM32_GPT_USE_TIM3 && !defined(__DOXYGEN__)
+extern GPTDriver GPTD3;
+#endif
+
+#if STM32_GPT_USE_TIM4 && !defined(__DOXYGEN__)
+extern GPTDriver GPTD4;
+#endif
+
+#if STM32_GPT_USE_TIM5 && !defined(__DOXYGEN__)
+extern GPTDriver GPTD5;
+#endif
+
+#if STM32_GPT_USE_TIM6 && !defined(__DOXYGEN__)
+extern GPTDriver GPTD6;
+#endif
+
+#if STM32_GPT_USE_TIM7 && !defined(__DOXYGEN__)
+extern GPTDriver GPTD7;
+#endif
+
+#if STM32_GPT_USE_TIM8 && !defined(__DOXYGEN__)
+extern GPTDriver GPTD8;
+#endif
+
+#if STM32_GPT_USE_TIM9 && !defined(__DOXYGEN__)
+extern GPTDriver GPTD9;
+#endif
+
+#if STM32_GPT_USE_TIM11 && !defined(__DOXYGEN__)
+extern GPTDriver GPTD11;
+#endif
+
+#if STM32_GPT_USE_TIM12 && !defined(__DOXYGEN__)
+extern GPTDriver GPTD12;
+#endif
+
+#if STM32_GPT_USE_TIM14 && !defined(__DOXYGEN__)
+extern GPTDriver GPTD14;
+#endif
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+ void gpt_lld_init(void);
+ void gpt_lld_start(GPTDriver *gptp);
+ void gpt_lld_stop(GPTDriver *gptp);
+ void gpt_lld_start_timer(GPTDriver *gptp, gptcnt_t period);
+ void gpt_lld_stop_timer(GPTDriver *gptp);
+ void gpt_lld_polled_delay(GPTDriver *gptp, gptcnt_t interval);
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* HAL_USE_GPT */
+
+#endif /* _GPT_LLD_H_ */
+
+/** @} */
diff --git a/os/hal/platforms/STM32/i2s_lld.c b/os/hal/platforms/STM32/i2s_lld.c new file mode 100644 index 000000000..b7eaf4b0c --- /dev/null +++ b/os/hal/platforms/STM32/i2s_lld.c @@ -0,0 +1,161 @@ +/*
+ ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+/**
+ * @file STM32/i2s_lld.c
+ * @brief I2S Driver subsystem low level driver source template.
+ *
+ * @addtogroup I2S
+ * @{
+ */
+
+#include "ch.h"
+#include "hal.h"
+
+#if HAL_USE_I2S || defined(__DOXYGEN__)
+
+/*===========================================================================*/
+/* Driver local definitions. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver exported variables. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver local variables and types. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver local functions. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver interrupt handlers. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver exported functions. */
+/*===========================================================================*/
+
+/**
+ * @brief Low level I2S driver initialization.
+ *
+ * @notapi
+ */
+void i2s_lld_init(void) {
+
+#if STM32_I2S_USE_I2S2
+ spiObjectInit(&I2SD2);
+ I2SD2.spi = SPI2;
+#endif
+
+#if STM32_I2S_USE_I2S3
+ spiObjectInit(&I2SD3);
+ I2SD3.spi = SPI3;
+#endif
+}
+
+/**
+ * @brief Configures and activates the I2S peripheral.
+ *
+ * @param[in] i2sp pointer to the @p I2SDriver object
+ *
+ * @notapi
+ */
+void i2s_lld_start(I2SDriver *i2sp) {
+
+ /* If in stopped state then enables the SPI and DMA clocks.*/
+ if (i2sp->state == I2S_STOP) {
+#if STM32_SPI_USE_SPI2
+ if (&SPID2 == spip) {
+ bool_t b;
+ b = dmaStreamAllocate(spip->dma,
+ STM32_I2S_I2S2_IRQ_PRIORITY,
+ (stm32_dmaisr_t)i2s_lld_serve_rx_interrupt,
+ (void *)spip);
+ chDbgAssert(!b, "spi_lld_start(), #1", "stream already allocated");
+ rccEnableSPI2(FALSE);
+ }
+#endif
+#if STM32_SPI_USE_SPI3
+ if (&SPID3 == spip) {
+ bool_t b;
+ b = dmaStreamAllocate(spip->dma,
+ STM32_I2S_I2S3_IRQ_PRIORITY,
+ (stm32_dmaisr_t)i2s_lld_serve_rx_interrupt,
+ (void *)spip);
+ chDbgAssert(!b, "spi_lld_start(), #2", "stream already allocated");
+ rccEnableSPI3(FALSE);
+ }
+#endif
+ }
+ /* Configuration.*/
+}
+
+/**
+ * @brief Deactivates the I2S peripheral.
+ *
+ * @param[in] i2sp pointer to the @p I2SDriver object
+ *
+ * @notapi
+ */
+void i2s_lld_stop(I2SDriver *i2sp) {
+
+ if (i2sp->state == I2S_READY) {
+ /* Clock deactivation.*/
+
+ }
+}
+
+/**
+ * @brief Starts a I2S data exchange.
+ *
+ * @param[in] i2sp pointer to the @p I2SDriver object
+ *
+ * @notapi
+ */
+void i2s_lld_start_exchange(I2SDriver *i2sp) {
+
+}
+
+/**
+ * @brief Starts a I2S data exchange in continuous mode.
+ *
+ * @param[in] i2sp pointer to the @p I2SDriver object
+ *
+ * @notapi
+ */
+void i2s_lld_start_exchange_continuous(I2SDriver *i2sp) {
+
+}
+
+/**
+ * @brief Stops the ongoing data exchange.
+ * @details The ongoing data exchange, if any, is stopped, if the driver
+ * was not active the function does nothing.
+ *
+ * @param[in] i2sp pointer to the @p I2SDriver object
+ *
+ * @notapi
+ */
+void i2s_lld_stop_exchange(I2SDriver *i2sp) {
+
+}
+
+#endif /* HAL_USE_I2S */
+
+/** @} */
diff --git a/os/hal/platforms/STM32/i2s_lld.h b/os/hal/platforms/STM32/i2s_lld.h new file mode 100644 index 000000000..3f9c640b3 --- /dev/null +++ b/os/hal/platforms/STM32/i2s_lld.h @@ -0,0 +1,317 @@ +/*
+ ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+/**
+ * @file STM32/i2s_lld.h
+ * @brief I2S Driver subsystem low level driver header template.
+ *
+ * @addtogroup I2S
+ * @{
+ */
+
+#ifndef _I2S_LLD_H_
+#define _I2S_LLD_H_
+
+#if HAL_USE_I2S || defined(__DOXYGEN__)
+
+/*===========================================================================*/
+/* Driver constants. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver pre-compile time settings. */
+/*===========================================================================*/
+
+/**
+ * @name Configuration options
+ * @{
+ */
+/**
+ * @brief I2S2 driver enable switch.
+ * @details If set to @p TRUE the support for I2S2 is included.
+ * @note The default is @p TRUE.
+ */
+#if !defined(STM32_I2S_USE_I2S2) || defined(__DOXYGEN__)
+#define STM32_I2S_USE_I2S2 FALSE
+#endif
+
+/**
+ * @brief I2S3 driver enable switch.
+ * @details If set to @p TRUE the support for I2S3 is included.
+ * @note The default is @p TRUE.
+ */
+#if !defined(STM32_I2S_USE_I2S3) || defined(__DOXYGEN__)
+#define STM32_I2S_USE_I2S3 FALSE
+#endif
+
+/**
+ * @brief I2S2 interrupt priority level setting.
+ */
+#if !defined(STM32_I2S_I2S2_IRQ_PRIORITY) || defined(__DOXYGEN__)
+#define STM32_I2S_I2S2_IRQ_PRIORITY 10
+#endif
+
+/**
+ * @brief I2S3 interrupt priority level setting.
+ */
+#if !defined(STM32_I2S_I2S3_IRQ_PRIORITY) || defined(__DOXYGEN__)
+#define STM32_I2S_I2S3_IRQ_PRIORITY 10
+#endif
+
+/**
+ * @brief I2S2 DMA priority (0..3|lowest..highest).
+ */
+#if !defined(STM32_I2S_I2S2_DMA_PRIORITY) || defined(__DOXYGEN__)
+#define STM32_I2S_I2S2_DMA_PRIORITY 1
+#endif
+
+/**
+ * @brief I2S3 DMA priority (0..3|lowest..highest).
+ */
+#if !defined(STM32_I2S_I2S2_DMA_PRIORITY) || defined(__DOXYGEN__)
+#define STM32_I2S_I2S2_DMA_PRIORITY 1
+#endif
+
+/**
+ * @brief I2S DMA error hook.
+ */
+#if !defined(STM32_I2S_DMA_ERROR_HOOK) || defined(__DOXYGEN__)
+#define STM32_I2S_DMA_ERROR_HOOK(i2sp) chSysHalt()
+#endif
+
+#if STM32_ADVANCED_DMA || defined(__DOXYGEN__)
+
+/**
+ * @brief DMA stream used for I2S2 RX operations.
+ * @note This option is only available on platforms with enhanced DMA.
+ */
+#if !defined(STM32_I2S_I2S2_RX_DMA_STREAM) || defined(__DOXYGEN__)
+#define STM32_I2S_I2S2_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 0)
+#endif
+
+/**
+ * @brief DMA stream used for I2S2 TX operations.
+ * @note This option is only available on platforms with enhanced DMA.
+ */
+#if !defined(STM32_I2S_I2S2_TX_DMA_STREAM) || defined(__DOXYGEN__)
+#define STM32_I2S_I2S2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4)
+#endif
+
+/**
+ * @brief DMA stream used for I2S3 RX operations.
+ * @note This option is only available on platforms with enhanced DMA.
+ */
+#if !defined(STM32_I2S_I2S3_RX_DMA_STREAM) || defined(__DOXYGEN__)
+#define STM32_I2S_I2S3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0)
+#endif
+
+/**
+ * @brief DMA stream used for I2S3 TX operations.
+ * @note This option is only available on platforms with enhanced DMA.
+ */
+#if !defined(STM32_I2S_I2S3_TX_DMA_STREAM) || defined(__DOXYGEN__)
+#define STM32_I2S_I2S3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7)
+#endif
+
+#else /* !STM32_ADVANCED_DMA */
+
+/* Fixed streams for platforms using the old DMA peripheral, the values are
+ valid for both STM32F1xx and STM32L1xx.*/
+#define STM32_I2S_I2S2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4)
+#define STM32_I2S_I2S2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5)
+#define STM32_I2S_I2S3_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 1)
+#define STM32_I2S_I2S3_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 2)
+
+#endif /* !STM32_ADVANCED_DMA */
+/** @} */
+
+/*===========================================================================*/
+/* Derived constants and error checks. */
+/*===========================================================================*/
+
+#if STM32_I2S_USE_I2S2 && !STM32_HAS_SPI2
+#error "SPI2 not present in the selected device"
+#endif
+
+#if STM32_I2S_USE_I2S3 && !STM32_HAS_SPI3
+#error "SPI3 not present in the selected device"
+#endif
+
+#if !STM32_I2S_USE_I2S2 && !STM32_I2S_USE_I2S3
+#error "I2S driver activated but no I2S peripheral assigned"
+#endif
+
+#if STM32_I2S_USE_I2S2 && \
+ !STM32_DMA_IS_VALID_ID(STM32_I2S_I2S2_RX_DMA_STREAM, STM32_SPI2_RX_DMA_MSK)
+#error "invalid DMA stream associated to I2S2 RX"
+#endif
+
+#if STM32_I2S_USE_I2S2 && \
+ !STM32_DMA_IS_VALID_ID(STM32_I2S_I2S2_TX_DMA_STREAM, STM32_SPI2_TX_DMA_MSK)
+#error "invalid DMA stream associated to I2S2 TX"
+#endif
+
+#if STM32_I2S_USE_I2S3 && \
+ !STM32_DMA_IS_VALID_ID(STM32_I2S_I2S3_RX_DMA_STREAM, STM32_SPI3_RX_DMA_MSK)
+#error "invalid DMA stream associated to I2S3 RX"
+#endif
+
+#if STM32_I2S_USE_I2S3 && \
+ !STM32_DMA_IS_VALID_ID(STM32_I2S_I2S3_TX_DMA_STREAM, STM32_SPI3_TX_DMA_MSK)
+#error "invalid DMA stream associated to I2S3 TX"
+#endif
+
+#if !defined(STM32_DMA_REQUIRED)
+#define STM32_DMA_REQUIRED
+#endif
+
+/*===========================================================================*/
+/* Driver data structures and types. */
+/*===========================================================================*/
+
+/**
+ * @brief I2S mode type.
+ */
+typedef uint32_t i2smode_t;
+
+/**
+ * @brief Type of a structure representing an I2S driver.
+ */
+typedef struct I2SDriver I2SDriver;
+
+/**
+ * @brief I2S notification callback type.
+ *
+ * @param[in] i2sp pointer to the @p I2SDriver object
+ * @param[in] buffer pointer to the buffer
+ * @param[in] n number of sample positions starting from @p buffer
+ */
+typedef void (*i2scallback_t)(I2SDriver *i2sp, void *buffer, size_t n);
+
+/**
+ * @brief Driver configuration structure.
+ * @note It could be empty on some architectures.
+ */
+typedef struct {
+ /**
+ * @brief I2S mode selection.
+ */
+ i2smode_t mode;
+ /**
+ * @brief Transmission buffer pointer.
+ */
+ const void *tx_buffer;
+ /**
+ * @brief Transmission buffer size in number of samples.
+ */
+ size_t tx_size;
+ /**
+ * @brief Callback function associated to the transmission or @p NULL.
+ */
+ i2scallback_t tx_cb;
+ /**
+ * @brief Receive buffer pointer.
+ */
+ void *rx_buffer;
+ /**
+ * @brief Receive buffer size in number of samples.
+ */
+ size_t rx_size;
+ /**
+ * @brief Callback function associated to the reception or @p NULL.
+ */
+ i2scallback_t rx_cb;;
+ /* End of the mandatory fields.*/
+ /**
+ * @brief Configuration of the I2SCFGR register.
+ * @details See the STM32 reference manual, this register is used for
+ * the I2S configuration, the following bits must not be
+ * specified because handled directly by the driver:
+ * - I2SMOD
+ * - I2SE
+ * - I2SCFG
+ * .
+ */
+ int16_t i2scfgr;
+ /**
+ * @brief Configuration of the I2SPR register.
+ * @details See the STM32 reference manual, this register is used for
+ * the I2S clock setup.
+ */
+ int16_t i2spr;
+} I2SConfig;
+
+/**
+ * @brief Structure representing an I2S driver.
+ */
+struct I2SDriver {
+ /**
+ * @brief Driver state.
+ */
+ i2sstate_t state;
+ /**
+ * @brief Current configuration data.
+ */
+ const I2SConfig *config;
+ /* End of the mandatory fields.*/
+ /**
+ * @brief Pointer to the SPIx registers block.
+ */
+ SPI_TypeDef *spi;
+ /**
+ * @brief DMA stream.
+ */
+ const stm32_dma_stream_t *dma;
+ /**
+ * @brief DMA mode bit mask.
+ */
+ uint32_t dmamode;
+};
+
+/*===========================================================================*/
+/* Driver macros. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* External declarations. */
+/*===========================================================================*/
+
+#if STM32_I2S_USE_I2S2 && !defined(__DOXYGEN__)
+extern I2SDriver I2SD2;
+#endif
+
+#if STM32_I2S_USE_I2S3 && !defined(__DOXYGEN__)
+extern I2SDriver I2SD3;
+#endif
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+ void i2s_lld_init(void);
+ void i2s_lld_start(I2SDriver *i2sp);
+ void i2s_lld_stop(I2SDriver *i2sp);
+ void i2s_lld_start_exchange(I2SDriver *i2sp);
+ void i2s_lld_start_exchange_continuous(I2SDriver *i2sp);
+ void i2s_lld_stop_exchange(I2SDriver *i2sp);
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* HAL_USE_I2S */
+
+#endif /* _I2S_LLD_H_ */
+
+/** @} */
diff --git a/os/hal/platforms/STM32/icu_lld.c b/os/hal/platforms/STM32/icu_lld.c new file mode 100644 index 000000000..149231aa3 --- /dev/null +++ b/os/hal/platforms/STM32/icu_lld.c @@ -0,0 +1,629 @@ +/*
+ ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+/*
+ Concepts and parts of this file have been contributed by Fabio Utzig and
+ Xo Wang.
+ */
+
+/**
+ * @file STM32/icu_lld.c
+ * @brief STM32 ICU subsystem low level driver header.
+ *
+ * @addtogroup ICU
+ * @{
+ */
+
+#include "hal.h"
+
+#if HAL_USE_ICU || defined(__DOXYGEN__)
+
+/*===========================================================================*/
+/* Driver local definitions. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver exported variables. */
+/*===========================================================================*/
+
+/**
+ * @brief ICUD1 driver identifier.
+ * @note The driver ICUD1 allocates the complex timer TIM1 when enabled.
+ */
+#if STM32_ICU_USE_TIM1 || defined(__DOXYGEN__)
+ICUDriver ICUD1;
+#endif
+
+/**
+ * @brief ICUD2 driver identifier.
+ * @note The driver ICUD1 allocates the timer TIM2 when enabled.
+ */
+#if STM32_ICU_USE_TIM2 || defined(__DOXYGEN__)
+ICUDriver ICUD2;
+#endif
+
+/**
+ * @brief ICUD3 driver identifier.
+ * @note The driver ICUD1 allocates the timer TIM3 when enabled.
+ */
+#if STM32_ICU_USE_TIM3 || defined(__DOXYGEN__)
+ICUDriver ICUD3;
+#endif
+
+/**
+ * @brief ICUD4 driver identifier.
+ * @note The driver ICUD4 allocates the timer TIM4 when enabled.
+ */
+#if STM32_ICU_USE_TIM4 || defined(__DOXYGEN__)
+ICUDriver ICUD4;
+#endif
+
+/**
+ * @brief ICUD5 driver identifier.
+ * @note The driver ICUD5 allocates the timer TIM5 when enabled.
+ */
+#if STM32_ICU_USE_TIM5 || defined(__DOXYGEN__)
+ICUDriver ICUD5;
+#endif
+
+/**
+ * @brief ICUD8 driver identifier.
+ * @note The driver ICUD8 allocates the timer TIM8 when enabled.
+ */
+#if STM32_ICU_USE_TIM8 || defined(__DOXYGEN__)
+ICUDriver ICUD8;
+#endif
+
+/**
+ * @brief ICUD9 driver identifier.
+ * @note The driver ICUD9 allocates the timer TIM9 when enabled.
+ */
+#if STM32_ICU_USE_TIM9 || defined(__DOXYGEN__)
+ICUDriver ICUD9;
+#endif
+
+/*===========================================================================*/
+/* Driver local variables and types. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver local functions. */
+/*===========================================================================*/
+
+/**
+ * @brief Shared IRQ handler.
+ *
+ * @param[in] icup pointer to the @p ICUDriver object
+ */
+static void icu_lld_serve_interrupt(ICUDriver *icup) {
+ uint16_t sr;
+
+ sr = icup->tim->SR;
+ sr &= icup->tim->DIER;
+ icup->tim->SR = ~sr;
+ if (icup->config->channel == ICU_CHANNEL_1) {
+ if ((sr & TIM_SR_CC1IF) != 0)
+ _icu_isr_invoke_period_cb(icup);
+ if ((sr & TIM_SR_CC2IF) != 0)
+ _icu_isr_invoke_width_cb(icup);
+ } else {
+ if ((sr & TIM_SR_CC1IF) != 0)
+ _icu_isr_invoke_width_cb(icup);
+ if ((sr & TIM_SR_CC2IF) != 0)
+ _icu_isr_invoke_period_cb(icup);
+ }
+ if ((sr & TIM_SR_UIF) != 0)
+ _icu_isr_invoke_overflow_cb(icup);
+}
+
+/*===========================================================================*/
+/* Driver interrupt handlers. */
+/*===========================================================================*/
+
+#if STM32_ICU_USE_TIM1
+#if !defined(STM32_TIM1_UP_HANDLER)
+#error "STM32_TIM1_UP_HANDLER not defined"
+#endif
+/**
+ * @brief TIM1 compare interrupt handler.
+ * @note It is assumed that the various sources are only activated if the
+ * associated callback pointer is not equal to @p NULL in order to not
+ * perform an extra check in a potentially critical interrupt handler.
+ *
+ * @isr
+ */
+OSAL_IRQ_HANDLER(STM32_TIM1_UP_HANDLER) {
+
+ OSAL_IRQ_PROLOGUE();
+
+ icu_lld_serve_interrupt(&ICUD1);
+
+ OSAL_IRQ_EPILOGUE();
+}
+
+#if !defined(STM32_TIM1_CC_HANDLER)
+#error "STM32_TIM1_CC_HANDLER not defined"
+#endif
+/**
+ * @brief TIM1 compare interrupt handler.
+ * @note It is assumed that the various sources are only activated if the
+ * associated callback pointer is not equal to @p NULL in order to not
+ * perform an extra check in a potentially critical interrupt handler.
+ *
+ * @isr
+ */
+OSAL_IRQ_HANDLER(STM32_TIM1_CC_HANDLER) {
+
+ OSAL_IRQ_PROLOGUE();
+
+ icu_lld_serve_interrupt(&ICUD1);
+
+ OSAL_IRQ_EPILOGUE();
+}
+#endif /* STM32_ICU_USE_TIM1 */
+
+#if STM32_ICU_USE_TIM2
+#if !defined(STM32_TIM2_HANDLER)
+#error "STM32_TIM2_HANDLER not defined"
+#endif
+/**
+ * @brief TIM2 interrupt handler.
+ * @note It is assumed that the various sources are only activated if the
+ * associated callback pointer is not equal to @p NULL in order to not
+ * perform an extra check in a potentially critical interrupt handler.
+ *
+ * @isr
+ */
+OSAL_IRQ_HANDLER(STM32_TIM2_HANDLER) {
+
+ OSAL_IRQ_PROLOGUE();
+
+ icu_lld_serve_interrupt(&ICUD2);
+
+ OSAL_IRQ_EPILOGUE();
+}
+#endif /* STM32_ICU_USE_TIM2 */
+
+#if STM32_ICU_USE_TIM3
+#if !defined(STM32_TIM3_HANDLER)
+#error "STM32_TIM3_HANDLER not defined"
+#endif
+/**
+ * @brief TIM3 interrupt handler.
+ * @note It is assumed that the various sources are only activated if the
+ * associated callback pointer is not equal to @p NULL in order to not
+ * perform an extra check in a potentially critical interrupt handler.
+ *
+ * @isr
+ */
+OSAL_IRQ_HANDLER(STM32_TIM3_HANDLER) {
+
+ OSAL_IRQ_PROLOGUE();
+
+ icu_lld_serve_interrupt(&ICUD3);
+
+ OSAL_IRQ_EPILOGUE();
+}
+#endif /* STM32_ICU_USE_TIM3 */
+
+#if STM32_ICU_USE_TIM4
+#if !defined(STM32_TIM4_HANDLER)
+#error "STM32_TIM4_HANDLER not defined"
+#endif
+/**
+ * @brief TIM4 interrupt handler.
+ * @note It is assumed that the various sources are only activated if the
+ * associated callback pointer is not equal to @p NULL in order to not
+ * perform an extra check in a potentially critical interrupt handler.
+ *
+ * @isr
+ */
+OSAL_IRQ_HANDLER(STM32_TIM4_HANDLER) {
+
+ OSAL_IRQ_PROLOGUE();
+
+ icu_lld_serve_interrupt(&ICUD4);
+
+ OSAL_IRQ_EPILOGUE();
+}
+#endif /* STM32_ICU_USE_TIM4 */
+
+#if STM32_ICU_USE_TIM5
+#if !defined(STM32_TIM5_HANDLER)
+#error "STM32_TIM5_HANDLER not defined"
+#endif
+/**
+ * @brief TIM5 interrupt handler.
+ * @note It is assumed that the various sources are only activated if the
+ * associated callback pointer is not equal to @p NULL in order to not
+ * perform an extra check in a potentially critical interrupt handler.
+ *
+ * @isr
+ */
+OSAL_IRQ_HANDLER(STM32_TIM5_HANDLER) {
+
+ OSAL_IRQ_PROLOGUE();
+
+ icu_lld_serve_interrupt(&ICUD5);
+
+ OSAL_IRQ_EPILOGUE();
+}
+#endif /* STM32_ICU_USE_TIM5 */
+
+#if STM32_ICU_USE_TIM8
+#if !defined(STM32_TIM8_UP_HANDLER)
+#error "STM32_TIM8_UP_HANDLER not defined"
+#endif
+/**
+ * @brief TIM8 compare interrupt handler.
+ * @note It is assumed that the various sources are only activated if the
+ * associated callback pointer is not equal to @p NULL in order to not
+ * perform an extra check in a potentially critical interrupt handler.
+ *
+ * @isr
+ */
+OSAL_IRQ_HANDLER(STM32_TIM8_UP_HANDLER) {
+
+ OSAL_IRQ_PROLOGUE();
+
+ icu_lld_serve_interrupt(&ICUD8);
+
+ OSAL_IRQ_EPILOGUE();
+}
+
+#if !defined(STM32_TIM8_CC_HANDLER)
+#error "STM32_TIM8_CC_HANDLER not defined"
+#endif
+/**
+ * @brief TIM8 compare interrupt handler.
+ * @note It is assumed that the various sources are only activated if the
+ * associated callback pointer is not equal to @p NULL in order to not
+ * perform an extra check in a potentially critical interrupt handler.
+ *
+ * @isr
+ */
+OSAL_IRQ_HANDLER(STM32_TIM8_CC_HANDLER) {
+
+ OSAL_IRQ_PROLOGUE();
+
+ icu_lld_serve_interrupt(&ICUD8);
+
+ OSAL_IRQ_EPILOGUE();
+}
+#endif /* STM32_ICU_USE_TIM8 */
+
+#if STM32_ICU_USE_TIM9
+#if !defined(STM32_TIM9_HANDLER)
+#error "STM32_TIM9_HANDLER not defined"
+#endif
+/**
+ * @brief TIM9 interrupt handler.
+ * @note It is assumed that the various sources are only activated if the
+ * associated callback pointer is not equal to @p NULL in order to not
+ * perform an extra check in a potentially critical interrupt handler.
+ *
+ * @isr
+ */
+OSAL_IRQ_HANDLER(STM32_TIM9_HANDLER) {
+
+ OSAL_IRQ_PROLOGUE();
+
+ icu_lld_serve_interrupt(&ICUD9);
+
+ OSAL_IRQ_EPILOGUE();
+}
+#endif /* STM32_ICU_USE_TIM9 */
+
+/*===========================================================================*/
+/* Driver exported functions. */
+/*===========================================================================*/
+
+/**
+ * @brief Low level ICU driver initialization.
+ *
+ * @notapi
+ */
+void icu_lld_init(void) {
+
+#if STM32_ICU_USE_TIM1
+ /* Driver initialization.*/
+ icuObjectInit(&ICUD1);
+ ICUD1.tim = STM32_TIM1;
+#endif
+
+#if STM32_ICU_USE_TIM2
+ /* Driver initialization.*/
+ icuObjectInit(&ICUD2);
+ ICUD2.tim = STM32_TIM2;
+#endif
+
+#if STM32_ICU_USE_TIM3
+ /* Driver initialization.*/
+ icuObjectInit(&ICUD3);
+ ICUD3.tim = STM32_TIM3;
+#endif
+
+#if STM32_ICU_USE_TIM4
+ /* Driver initialization.*/
+ icuObjectInit(&ICUD4);
+ ICUD4.tim = STM32_TIM4;
+#endif
+
+#if STM32_ICU_USE_TIM5
+ /* Driver initialization.*/
+ icuObjectInit(&ICUD5);
+ ICUD5.tim = STM32_TIM5;
+#endif
+
+#if STM32_ICU_USE_TIM8
+ /* Driver initialization.*/
+ icuObjectInit(&ICUD8);
+ ICUD8.tim = STM32_TIM8;
+#endif
+
+#if STM32_ICU_USE_TIM9
+ /* Driver initialization.*/
+ icuObjectInit(&ICUD9);
+ ICUD9.tim = STM32_TIM9;
+#endif
+}
+
+/**
+ * @brief Configures and activates the ICU peripheral.
+ *
+ * @param[in] icup pointer to the @p ICUDriver object
+ *
+ * @notapi
+ */
+void icu_lld_start(ICUDriver *icup) {
+ uint32_t psc;
+
+ osalDbgAssert((icup->config->channel == ICU_CHANNEL_1) ||
+ (icup->config->channel == ICU_CHANNEL_2),
+ "icu_lld_start(), #1", "invalid input");
+
+ if (icup->state == ICU_STOP) {
+ /* Clock activation and timer reset.*/
+#if STM32_ICU_USE_TIM1
+ if (&ICUD1 == icup) {
+ rccEnableTIM1(FALSE);
+ rccResetTIM1();
+ nvicEnableVector(STM32_TIM1_UP_NUMBER, STM32_ICU_TIM1_IRQ_PRIORITY);
+ nvicEnableVector(STM32_TIM1_CC_NUMBER, STM32_ICU_TIM1_IRQ_PRIORITY);
+ icup->clock = STM32_TIMCLK2;
+ }
+#endif
+#if STM32_ICU_USE_TIM2
+ if (&ICUD2 == icup) {
+ rccEnableTIM2(FALSE);
+ rccResetTIM2();
+ nvicEnableVector(STM32_TIM2_NUMBER, STM32_ICU_TIM2_IRQ_PRIORITY);
+ icup->clock = STM32_TIMCLK1;
+ }
+#endif
+#if STM32_ICU_USE_TIM3
+ if (&ICUD3 == icup) {
+ rccEnableTIM3(FALSE);
+ rccResetTIM3();
+ nvicEnableVector(STM32_TIM3_NUMBER, STM32_ICU_TIM3_IRQ_PRIORITY);
+ icup->clock = STM32_TIMCLK1;
+ }
+#endif
+#if STM32_ICU_USE_TIM4
+ if (&ICUD4 == icup) {
+ rccEnableTIM4(FALSE);
+ rccResetTIM4();
+ nvicEnableVector(STM32_TIM4_NUMBER, STM32_ICU_TIM4_IRQ_PRIORITY);
+ icup->clock = STM32_TIMCLK1;
+ }
+#endif
+#if STM32_ICU_USE_TIM5
+ if (&ICUD5 == icup) {
+ rccEnableTIM5(FALSE);
+ rccResetTIM5();
+ nvicEnableVector(STM32_TIM5_NUMBER, STM32_ICU_TIM5_IRQ_PRIORITY);
+ icup->clock = STM32_TIMCLK1;
+ }
+#endif
+#if STM32_ICU_USE_TIM8
+ if (&ICUD8 == icup) {
+ rccEnableTIM8(FALSE);
+ rccResetTIM8();
+ nvicEnableVector(STM32_TIM8_UP_NUMBER, STM32_ICU_TIM8_IRQ_PRIORITY);
+ nvicEnableVector(STM32_TIM8_CC_NUMBER, STM32_ICU_TIM8_IRQ_PRIORITY);
+ icup->clock = STM32_TIMCLK2;
+ }
+#endif
+#if STM32_ICU_USE_TIM9
+ if (&ICUD9 == icup) {
+ rccEnableTIM9(FALSE);
+ rccResetTIM9();
+ nvicEnableVector(STM32_TIM9_NUMBER, STM32_ICU_TIM9_IRQ_PRIORITY);
+ icup->clock = STM32_TIMCLK1;
+ }
+#endif
+ }
+ else {
+ /* Driver re-configuration scenario, it must be stopped first.*/
+ icup->tim->CR1 = 0; /* Timer disabled. */
+ icup->tim->DIER = 0; /* All IRQs disabled. */
+ icup->tim->SR = 0; /* Clear eventual pending IRQs. */
+ icup->tim->CCR[0] = 0; /* Comparator 1 disabled. */
+ icup->tim->CCR[1] = 0; /* Comparator 2 disabled. */
+ icup->tim->CNT = 0; /* Counter reset to zero. */
+ }
+
+ /* Timer configuration.*/
+ psc = (icup->clock / icup->config->frequency) - 1;
+ osalDbgAssert((psc <= 0xFFFF) &&
+ ((psc + 1) * icup->config->frequency) == icup->clock,
+ "icu_lld_start(), #1", "invalid frequency");
+ icup->tim->PSC = (uint16_t)psc;
+ icup->tim->ARR = 0xFFFF;
+
+ if (icup->config->channel == ICU_CHANNEL_1) {
+ /* Selected input 1.
+ CCMR1_CC1S = 01 = CH1 Input on TI1.
+ CCMR1_CC2S = 10 = CH2 Input on TI1.*/
+ icup->tim->CCMR1 = TIM_CCMR1_CC1S_0 |
+ TIM_CCMR1_CC2S_1;
+ /* SMCR_TS = 101, input is TI1FP1.
+ SMCR_SMS = 100, reset on rising edge.*/
+ icup->tim->SMCR = TIM_SMCR_TS_2 | TIM_SMCR_TS_0 |
+ TIM_SMCR_SMS_2;
+ /* The CCER settings depend on the selected trigger mode.
+ ICU_INPUT_ACTIVE_HIGH: Active on rising edge, idle on falling edge.
+ ICU_INPUT_ACTIVE_LOW: Active on falling edge, idle on rising edge.*/
+ if (icup->config->mode == ICU_INPUT_ACTIVE_HIGH)
+ icup->tim->CCER = TIM_CCER_CC1E |
+ TIM_CCER_CC2E | TIM_CCER_CC2P;
+ else
+ icup->tim->CCER = TIM_CCER_CC1E | TIM_CCER_CC1P |
+ TIM_CCER_CC2E;
+ /* Direct pointers to the capture registers in order to make reading
+ data faster from within callbacks.*/
+ icup->wccrp = &icup->tim->CCR[1];
+ icup->pccrp = &icup->tim->CCR[0];
+ } else {
+ /* Selected input 2.
+ CCMR1_CC1S = 10 = CH1 Input on TI2.
+ CCMR1_CC2S = 01 = CH2 Input on TI2.*/
+ icup->tim->CCMR1 = TIM_CCMR1_CC1S_1 |
+ TIM_CCMR1_CC2S_0;
+ /* SMCR_TS = 110, input is TI2FP2.
+ SMCR_SMS = 100, reset on rising edge.*/
+ icup->tim->SMCR = TIM_SMCR_TS_2 | TIM_SMCR_TS_1 |
+ TIM_SMCR_SMS_2;
+ /* The CCER settings depend on the selected trigger mode.
+ ICU_INPUT_ACTIVE_HIGH: Active on rising edge, idle on falling edge.
+ ICU_INPUT_ACTIVE_LOW: Active on falling edge, idle on rising edge.*/
+ if (icup->config->mode == ICU_INPUT_ACTIVE_HIGH)
+ icup->tim->CCER = TIM_CCER_CC1E | TIM_CCER_CC1P |
+ TIM_CCER_CC2E;
+ else
+ icup->tim->CCER = TIM_CCER_CC1E |
+ TIM_CCER_CC2E | TIM_CCER_CC2P;
+ /* Direct pointers to the capture registers in order to make reading
+ data faster from within callbacks.*/
+ icup->wccrp = &icup->tim->CCR[0];
+ icup->pccrp = &icup->tim->CCR[1];
+ }
+}
+
+/**
+ * @brief Deactivates the ICU peripheral.
+ *
+ * @param[in] icup pointer to the @p ICUDriver object
+ *
+ * @notapi
+ */
+void icu_lld_stop(ICUDriver *icup) {
+
+ if (icup->state == ICU_READY) {
+ /* Clock deactivation.*/
+ icup->tim->CR1 = 0; /* Timer disabled. */
+ icup->tim->DIER = 0; /* All IRQs disabled. */
+ icup->tim->SR = 0; /* Clear eventual pending IRQs. */
+
+#if STM32_ICU_USE_TIM1
+ if (&ICUD1 == icup) {
+ nvicDisableVector(STM32_TIM1_UP_NUMBER);
+ nvicDisableVector(STM32_TIM1_CC_NUMBER);
+ rccDisableTIM1(FALSE);
+ }
+#endif
+#if STM32_ICU_USE_TIM2
+ if (&ICUD2 == icup) {
+ nvicDisableVector(STM32_TIM2_NUMBER);
+ rccDisableTIM2(FALSE);
+ }
+#endif
+#if STM32_ICU_USE_TIM3
+ if (&ICUD3 == icup) {
+ nvicDisableVector(STM32_TIM3_NUMBER);
+ rccDisableTIM3(FALSE);
+ }
+#endif
+#if STM32_ICU_USE_TIM4
+ if (&ICUD4 == icup) {
+ nvicDisableVector(STM32_TIM4_NUMBER);
+ rccDisableTIM4(FALSE);
+ }
+#endif
+#if STM32_ICU_USE_TIM5
+ if (&ICUD5 == icup) {
+ nvicDisableVector(STM32_TIM5_NUMBER);
+ rccDisableTIM5(FALSE);
+ }
+#endif
+#if STM32_ICU_USE_TIM8
+ if (&ICUD8 == icup) {
+ nvicDisableVector(STM32_TIM8_UP_NUMBER);
+ nvicDisableVector(STM32_TIM8_CC_NUMBER);
+ rccDisableTIM8(FALSE);
+ }
+#endif
+#if STM32_ICU_USE_TIM9
+ if (&ICUD9 == icup) {
+ nvicDisableVector(STM32_TIM9_NUMBER);
+ rccDisableTIM9(FALSE);
+ }
+#endif
+ }
+}
+
+/**
+ * @brief Enables the input capture.
+ *
+ * @param[in] icup pointer to the @p ICUDriver object
+ *
+ * @notapi
+ */
+void icu_lld_enable(ICUDriver *icup) {
+
+ icup->tim->SR = 0; /* Clear pending IRQs (if any). */
+ if (icup->config->channel == ICU_CHANNEL_1) {
+ if (icup->config->period_cb != NULL)
+ icup->tim->DIER |= TIM_DIER_CC1IE;
+ if (icup->config->width_cb != NULL)
+ icup->tim->DIER |= TIM_DIER_CC2IE;
+ } else {
+ if (icup->config->width_cb != NULL)
+ icup->tim->DIER |= TIM_DIER_CC1IE;
+ if (icup->config->period_cb != NULL)
+ icup->tim->DIER |= TIM_DIER_CC2IE;
+ }
+ if (icup->config->overflow_cb != NULL)
+ icup->tim->DIER |= TIM_DIER_UIE;
+ icup->tim->CR1 = TIM_CR1_URS | TIM_CR1_CEN;
+}
+
+/**
+ * @brief Disables the input capture.
+ *
+ * @param[in] icup pointer to the @p ICUDriver object
+ *
+ * @notapi
+ */
+void icu_lld_disable(ICUDriver *icup) {
+
+ icup->tim->CR1 = 0; /* Initially stopped. */
+ icup->tim->SR = 0; /* Clear pending IRQs (if any). */
+ icup->tim->DIER = 0; /* Interrupts disabled. */
+}
+
+#endif /* HAL_USE_ICU */
+
+/** @} */
diff --git a/os/hal/platforms/STM32/icu_lld.h b/os/hal/platforms/STM32/icu_lld.h new file mode 100644 index 000000000..ee5f313f3 --- /dev/null +++ b/os/hal/platforms/STM32/icu_lld.h @@ -0,0 +1,404 @@ +/*
+ ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+/**
+ * @file STM32/icu_lld.h
+ * @brief STM32 ICU subsystem low level driver header.
+ *
+ * @addtogroup ICU
+ * @{
+ */
+
+#ifndef _ICU_LLD_H_
+#define _ICU_LLD_H_
+
+#if HAL_USE_ICU || defined(__DOXYGEN__)
+
+/*===========================================================================*/
+/* Driver constants. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver pre-compile time settings. */
+/*===========================================================================*/
+
+/**
+ * @name Configuration options
+ * @{
+ */
+/**
+ * @brief ICUD1 driver enable switch.
+ * @details If set to @p TRUE the support for ICUD1 is included.
+ * @note The default is @p TRUE.
+ */
+#if !defined(STM32_ICU_USE_TIM1) || defined(__DOXYGEN__)
+#define STM32_ICU_USE_TIM1 FALSE
+#endif
+
+/**
+ * @brief ICUD2 driver enable switch.
+ * @details If set to @p TRUE the support for ICUD2 is included.
+ * @note The default is @p TRUE.
+ */
+#if !defined(STM32_ICU_USE_TIM2) || defined(__DOXYGEN__)
+#define STM32_ICU_USE_TIM2 FALSE
+#endif
+
+/**
+ * @brief ICUD3 driver enable switch.
+ * @details If set to @p TRUE the support for ICUD3 is included.
+ * @note The default is @p TRUE.
+ */
+#if !defined(STM32_ICU_USE_TIM3) || defined(__DOXYGEN__)
+#define STM32_ICU_USE_TIM3 FALSE
+#endif
+
+/**
+ * @brief ICUD4 driver enable switch.
+ * @details If set to @p TRUE the support for ICUD4 is included.
+ * @note The default is @p TRUE.
+ */
+#if !defined(STM32_ICU_USE_TIM4) || defined(__DOXYGEN__)
+#define STM32_ICU_USE_TIM4 FALSE
+#endif
+
+/**
+ * @brief ICUD5 driver enable switch.
+ * @details If set to @p TRUE the support for ICUD5 is included.
+ * @note The default is @p TRUE.
+ */
+#if !defined(STM32_ICU_USE_TIM5) || defined(__DOXYGEN__)
+#define STM32_ICU_USE_TIM5 FALSE
+#endif
+
+/**
+ * @brief ICUD8 driver enable switch.
+ * @details If set to @p TRUE the support for ICUD8 is included.
+ * @note The default is @p TRUE.
+ */
+#if !defined(STM32_ICU_USE_TIM8) || defined(__DOXYGEN__)
+#define STM32_ICU_USE_TIM8 FALSE
+#endif
+
+/**
+ * @brief ICUD9 driver enable switch.
+ * @details If set to @p TRUE the support for ICUD9 is included.
+ * @note The default is @p TRUE.
+ */
+#if !defined(STM32_ICU_USE_TIM9) || defined(__DOXYGEN__)
+#define STM32_ICU_USE_TIM9 FALSE
+#endif
+
+/**
+ * @brief ICUD1 interrupt priority level setting.
+ */
+#if !defined(STM32_ICU_TIM1_IRQ_PRIORITY) || defined(__DOXYGEN__)
+#define STM32_ICU_TIM1_IRQ_PRIORITY 7
+#endif
+
+/**
+ * @brief ICUD2 interrupt priority level setting.
+ */
+#if !defined(STM32_ICU_TIM2_IRQ_PRIORITY) || defined(__DOXYGEN__)
+#define STM32_ICU_TIM2_IRQ_PRIORITY 7
+#endif
+
+/**
+ * @brief ICUD3 interrupt priority level setting.
+ */
+#if !defined(STM32_ICU_TIM3_IRQ_PRIORITY) || defined(__DOXYGEN__)
+#define STM32_ICU_TIM3_IRQ_PRIORITY 7
+#endif
+
+/**
+ * @brief ICUD4 interrupt priority level setting.
+ */
+#if !defined(STM32_ICU_TIM4_IRQ_PRIORITY) || defined(__DOXYGEN__)
+#define STM32_ICU_TIM4_IRQ_PRIORITY 7
+#endif
+
+/**
+ * @brief ICUD5 interrupt priority level setting.
+ */
+#if !defined(STM32_ICU_TIM5_IRQ_PRIORITY) || defined(__DOXYGEN__)
+#define STM32_ICU_TIM5_IRQ_PRIORITY 7
+#endif
+
+/**
+ * @brief ICUD8 interrupt priority level setting.
+ */
+#if !defined(STM32_ICU_TIM8_IRQ_PRIORITY) || defined(__DOXYGEN__)
+#define STM32_ICU_TIM8_IRQ_PRIORITY 7
+#endif
+
+/**
+ * @brief ICUD9 interrupt priority level setting.
+ */
+#if !defined(STM32_ICU_TIM9_IRQ_PRIORITY) || defined(__DOXYGEN__)
+#define STM32_ICU_TIM9_IRQ_PRIORITY 7
+#endif
+/** @} */
+
+/*===========================================================================*/
+/* Derived constants and error checks. */
+/*===========================================================================*/
+
+#if STM32_ICU_USE_TIM1 && !STM32_HAS_TIM1
+#error "TIM1 not present in the selected device"
+#endif
+
+#if STM32_ICU_USE_TIM2 && !STM32_HAS_TIM2
+#error "TIM2 not present in the selected device"
+#endif
+
+#if STM32_ICU_USE_TIM3 && !STM32_HAS_TIM3
+#error "TIM3 not present in the selected device"
+#endif
+
+#if STM32_ICU_USE_TIM4 && !STM32_HAS_TIM4
+#error "TIM4 not present in the selected device"
+#endif
+
+#if STM32_ICU_USE_TIM5 && !STM32_HAS_TIM5
+#error "TIM5 not present in the selected device"
+#endif
+
+#if STM32_ICU_USE_TIM8 && !STM32_HAS_TIM8
+#error "TIM8 not present in the selected device"
+#endif
+
+#if STM32_ICU_USE_TIM9 && !STM32_HAS_TIM9
+#error "TIM9 not present in the selected device"
+#endif
+
+#if !STM32_ICU_USE_TIM1 && !STM32_ICU_USE_TIM2 && \
+ !STM32_ICU_USE_TIM3 && !STM32_ICU_USE_TIM4 && \
+ !STM32_ICU_USE_TIM5 && !STM32_ICU_USE_TIM8 && \
+ !STM32_ICU_USE_TIM9
+#error "ICU driver activated but no TIM peripheral assigned"
+#endif
+
+#if STM32_ICU_USE_TIM1 && \
+ !CORTEX_IS_VALID_KERNEL_PRIORITY(STM32_ICU_TIM1_IRQ_PRIORITY)
+#error "Invalid IRQ priority assigned to TIM1"
+#endif
+
+#if STM32_ICU_USE_TIM2 && \
+ !CORTEX_IS_VALID_KERNEL_PRIORITY(STM32_ICU_TIM2_IRQ_PRIORITY)
+#error "Invalid IRQ priority assigned to TIM2"
+#endif
+
+#if STM32_ICU_USE_TIM3 && \
+ !CORTEX_IS_VALID_KERNEL_PRIORITY(STM32_ICU_TIM3_IRQ_PRIORITY)
+#error "Invalid IRQ priority assigned to TIM3"
+#endif
+
+#if STM32_ICU_USE_TIM4 && \
+ !CORTEX_IS_VALID_KERNEL_PRIORITY(STM32_ICU_TIM4_IRQ_PRIORITY)
+#error "Invalid IRQ priority assigned to TIM4"
+#endif
+
+#if STM32_ICU_USE_TIM5 && \
+ !CORTEX_IS_VALID_KERNEL_PRIORITY(STM32_ICU_TIM5_IRQ_PRIORITY)
+#error "Invalid IRQ priority assigned to TIM5"
+#endif
+
+#if STM32_ICU_USE_TIM8 && \
+ !CORTEX_IS_VALID_KERNEL_PRIORITY(STM32_ICU_TIM8_IRQ_PRIORITY)
+#error "Invalid IRQ priority assigned to TIM8"
+#endif
+
+#if STM32_ICU_USE_TIM9 && \
+ !CORTEX_IS_VALID_KERNEL_PRIORITY(STM32_ICU_TIM9_IRQ_PRIORITY)
+#error "Invalid IRQ priority assigned to TIM9"
+#endif
+
+/*===========================================================================*/
+/* Driver data structures and types. */
+/*===========================================================================*/
+
+/**
+ * @brief ICU driver mode.
+ */
+typedef enum {
+ ICU_INPUT_ACTIVE_HIGH = 0, /**< Trigger on rising edge. */
+ ICU_INPUT_ACTIVE_LOW = 1, /**< Trigger on falling edge. */
+} icumode_t;
+
+/**
+ * @brief ICU frequency type.
+ */
+typedef uint32_t icufreq_t;
+
+/**
+ * @brief ICU channel type.
+ */
+typedef enum {
+ ICU_CHANNEL_1 = 0, /**< Use TIMxCH1. */
+ ICU_CHANNEL_2 = 1, /**< Use TIMxCH2. */
+} icuchannel_t;
+
+/**
+ * @brief ICU counter type.
+ */
+typedef uint16_t icucnt_t;
+
+/**
+ * @brief Driver configuration structure.
+ * @note It could be empty on some architectures.
+ */
+typedef struct {
+ /**
+ * @brief Driver mode.
+ */
+ icumode_t mode;
+ /**
+ * @brief Timer clock in Hz.
+ * @note The low level can use assertions in order to catch invalid
+ * frequency specifications.
+ */
+ icufreq_t frequency;
+ /**
+ * @brief Callback for pulse width measurement.
+ */
+ icucallback_t width_cb;
+ /**
+ * @brief Callback for cycle period measurement.
+ */
+ icucallback_t period_cb;
+ /**
+ * @brief Callback for timer overflow.
+ */
+ icucallback_t overflow_cb;
+ /* End of the mandatory fields.*/
+ /**
+ * @brief Timer input channel to be used.
+ * @note Only inputs TIMx 1 and 2 are supported.
+ */
+ icuchannel_t channel;
+} ICUConfig;
+
+/**
+ * @brief Structure representing an ICU driver.
+ */
+struct ICUDriver {
+ /**
+ * @brief Driver state.
+ */
+ icustate_t state;
+ /**
+ * @brief Current configuration data.
+ */
+ const ICUConfig *config;
+#if defined(ICU_DRIVER_EXT_FIELDS)
+ ICU_DRIVER_EXT_FIELDS
+#endif
+ /* End of the mandatory fields.*/
+ /**
+ * @brief Timer base clock.
+ */
+ uint32_t clock;
+ /**
+ * @brief Pointer to the TIMx registers block.
+ */
+ stm32_tim_t *tim;
+ /**
+ * @brief CCR register used for width capture.
+ */
+ volatile uint32_t *wccrp;
+ /**
+ * @brief CCR register used for period capture.
+ */
+ volatile uint32_t *pccrp;
+};
+
+/*===========================================================================*/
+/* Driver macros. */
+/*===========================================================================*/
+
+/**
+ * @brief Returns the width of the latest pulse.
+ * @details The pulse width is defined as number of ticks between the start
+ * edge and the stop edge.
+ *
+ * @param[in] icup pointer to the @p ICUDriver object
+ * @return The number of ticks.
+ *
+ * @notapi
+ */
+#define icu_lld_get_width(icup) (*((icup)->wccrp) + 1)
+
+/**
+ * @brief Returns the width of the latest cycle.
+ * @details The cycle width is defined as number of ticks between a start
+ * edge and the next start edge.
+ *
+ * @param[in] icup pointer to the @p ICUDriver object
+ * @return The number of ticks.
+ *
+ * @notapi
+ */
+#define icu_lld_get_period(icup) (*((icup)->pccrp) + 1)
+
+/*===========================================================================*/
+/* External declarations. */
+/*===========================================================================*/
+
+#if STM32_ICU_USE_TIM1 && !defined(__DOXYGEN__)
+extern ICUDriver ICUD1;
+#endif
+
+#if STM32_ICU_USE_TIM2 && !defined(__DOXYGEN__)
+extern ICUDriver ICUD2;
+#endif
+
+#if STM32_ICU_USE_TIM3 && !defined(__DOXYGEN__)
+extern ICUDriver ICUD3;
+#endif
+
+#if STM32_ICU_USE_TIM4 && !defined(__DOXYGEN__)
+extern ICUDriver ICUD4;
+#endif
+
+#if STM32_ICU_USE_TIM5 && !defined(__DOXYGEN__)
+extern ICUDriver ICUD5;
+#endif
+
+#if STM32_ICU_USE_TIM8 && !defined(__DOXYGEN__)
+extern ICUDriver ICUD8;
+#endif
+
+#if STM32_ICU_USE_TIM9 && !defined(__DOXYGEN__)
+extern ICUDriver ICUD9;
+#endif
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+ void icu_lld_init(void);
+ void icu_lld_start(ICUDriver *icup);
+ void icu_lld_stop(ICUDriver *icup);
+ void icu_lld_enable(ICUDriver *icup);
+ void icu_lld_disable(ICUDriver *icup);
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* HAL_USE_ICU */
+
+#endif /* _ICU_LLD_H_ */
+
+/** @} */
diff --git a/os/hal/platforms/STM32/mac_lld.c b/os/hal/platforms/STM32/mac_lld.c new file mode 100644 index 000000000..c1244aa39 --- /dev/null +++ b/os/hal/platforms/STM32/mac_lld.c @@ -0,0 +1,739 @@ +/*
+ ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+/**
+ * @file STM32/mac_lld.c
+ * @brief STM32 low level MAC driver code.
+ *
+ * @addtogroup MAC
+ * @{
+ */
+
+#include <string.h>
+
+#include "ch.h"
+#include "hal.h"
+#include "mii.h"
+
+#if HAL_USE_MAC || defined(__DOXYGEN__)
+
+/*===========================================================================*/
+/* Driver local definitions. */
+/*===========================================================================*/
+
+#define BUFFER_SIZE ((((STM32_MAC_BUFFERS_SIZE - 1) | 3) + 1) / 4)
+
+/* MII divider optimal value.*/
+#if (STM32_HCLK >= 150000000)
+#define MACMIIDR_CR ETH_MACMIIAR_CR_Div102
+#elif (STM32_HCLK >= 100000000)
+#define MACMIIDR_CR ETH_MACMIIAR_CR_Div62
+#elif (STM32_HCLK >= 60000000)
+#define MACMIIDR_CR ETH_MACMIIAR_CR_Div42
+#elif (STM32_HCLK >= 35000000)
+#define MACMIIDR_CR ETH_MACMIIAR_CR_Div26
+#elif (STM32_HCLK >= 20000000)
+#define MACMIIDR_CR ETH_MACMIIAR_CR_Div16
+#else
+#error "STM32_HCLK below minimum frequency for ETH operations (20MHz)"
+#endif
+
+/*===========================================================================*/
+/* Driver exported variables. */
+/*===========================================================================*/
+
+/**
+ * @brief Ethernet driver 1.
+ */
+MACDriver ETHD1;
+
+/*===========================================================================*/
+/* Driver local variables and types. */
+/*===========================================================================*/
+
+static const uint8_t default_mac_address[] = {0xAA, 0x55, 0x13,
+ 0x37, 0x01, 0x10};
+
+static stm32_eth_rx_descriptor_t rd[STM32_MAC_RECEIVE_BUFFERS];
+static stm32_eth_tx_descriptor_t td[STM32_MAC_TRANSMIT_BUFFERS];
+
+static uint32_t rb[STM32_MAC_RECEIVE_BUFFERS][BUFFER_SIZE];
+static uint32_t tb[STM32_MAC_TRANSMIT_BUFFERS][BUFFER_SIZE];
+
+/*===========================================================================*/
+/* Driver local functions. */
+/*===========================================================================*/
+
+/**
+ * @brief Writes a PHY register.
+ *
+ * @param[in] macp pointer to the @p MACDriver object
+ * @param[in] reg register number
+ * @param[in] value new register value
+ */
+static void mii_write(MACDriver *macp, uint32_t reg, uint32_t value) {
+
+ ETH->MACMIIDR = value;
+ ETH->MACMIIAR = macp->phyaddr | (reg << 6) | MACMIIDR_CR |
+ ETH_MACMIIAR_MW | ETH_MACMIIAR_MB;
+ while ((ETH->MACMIIAR & ETH_MACMIIAR_MB) != 0)
+ ;
+}
+
+/**
+ * @brief Reads a PHY register.
+ *
+ * @param[in] macp pointer to the @p MACDriver object
+ * @param[in] reg register number
+ *
+ * @return The PHY register content.
+ */
+static uint32_t mii_read(MACDriver *macp, uint32_t reg) {
+
+ ETH->MACMIIAR = macp->phyaddr | (reg << 6) | MACMIIDR_CR | ETH_MACMIIAR_MB;
+ while ((ETH->MACMIIAR & ETH_MACMIIAR_MB) != 0)
+ ;
+ return ETH->MACMIIDR;
+}
+
+#if !defined(BOARD_PHY_ADDRESS)
+/**
+ * @brief PHY address detection.
+ *
+ * @param[in] macp pointer to the @p MACDriver object
+ */
+static void mii_find_phy(MACDriver *macp) {
+ uint32_t i;
+
+#if STM32_MAC_PHY_TIMEOUT > 0
+ halrtcnt_t start = halGetCounterValue();
+ halrtcnt_t timeout = start + MS2RTT(STM32_MAC_PHY_TIMEOUT);
+ while (halIsCounterWithin(start, timeout)) {
+#endif
+ for (i = 0; i < 31; i++) {
+ macp->phyaddr = i << 11;
+ ETH->MACMIIDR = (i << 6) | MACMIIDR_CR;
+ if ((mii_read(macp, MII_PHYSID1) == (BOARD_PHY_ID >> 16)) &&
+ ((mii_read(macp, MII_PHYSID2) & 0xFFF0) == (BOARD_PHY_ID & 0xFFF0))) {
+ return;
+ }
+ }
+#if STM32_MAC_PHY_TIMEOUT > 0
+ }
+#endif
+ /* Wrong or defective board.*/
+ chSysHalt();
+}
+#endif
+
+/**
+ * @brief MAC address setup.
+ *
+ * @param[in] p pointer to a six bytes buffer containing the MAC
+ * address
+ */
+static void mac_lld_set_address(const uint8_t *p) {
+
+ /* MAC address configuration, only a single address comparator is used,
+ hash table not used.*/
+ ETH->MACA0HR = ((uint32_t)p[5] << 8) |
+ ((uint32_t)p[4] << 0);
+ ETH->MACA0LR = ((uint32_t)p[3] << 24) |
+ ((uint32_t)p[2] << 16) |
+ ((uint32_t)p[1] << 8) |
+ ((uint32_t)p[0] << 0);
+ ETH->MACA1HR = 0x0000FFFF;
+ ETH->MACA1LR = 0xFFFFFFFF;
+ ETH->MACA2HR = 0x0000FFFF;
+ ETH->MACA2LR = 0xFFFFFFFF;
+ ETH->MACA3HR = 0x0000FFFF;
+ ETH->MACA3LR = 0xFFFFFFFF;
+ ETH->MACHTHR = 0;
+ ETH->MACHTLR = 0;
+}
+
+/*===========================================================================*/
+/* Driver interrupt handlers. */
+/*===========================================================================*/
+
+CH_IRQ_HANDLER(ETH_IRQHandler) {
+ uint32_t dmasr;
+
+ CH_IRQ_PROLOGUE();
+
+ dmasr = ETH->DMASR;
+ ETH->DMASR = dmasr; /* Clear status bits.*/
+
+ if (dmasr & ETH_DMASR_RS) {
+ /* Data Received.*/
+ chSysLockFromIsr();
+ chSemResetI(ÐD1.rdsem, 0);
+#if MAC_USE_EVENTS
+ chEvtBroadcastI(ÐD1.rdevent);
+#endif
+ chSysUnlockFromIsr();
+ }
+
+ if (dmasr & ETH_DMASR_TS) {
+ /* Data Transmitted.*/
+ chSysLockFromIsr();
+ chSemResetI(ÐD1.tdsem, 0);
+ chSysUnlockFromIsr();
+ }
+
+ CH_IRQ_EPILOGUE();
+}
+
+/*===========================================================================*/
+/* Driver exported functions. */
+/*===========================================================================*/
+
+/**
+ * @brief Low level MAC initialization.
+ *
+ * @notapi
+ */
+void mac_lld_init(void) {
+ unsigned i;
+
+ macObjectInit(ÐD1);
+ ETHD1.link_up = FALSE;
+
+ /* Descriptor tables are initialized in chained mode, note that the first
+ word is not initialized here but in mac_lld_start().*/
+ for (i = 0; i < STM32_MAC_RECEIVE_BUFFERS; i++) {
+ rd[i].rdes1 = STM32_RDES1_RCH | STM32_MAC_BUFFERS_SIZE;
+ rd[i].rdes2 = (uint32_t)rb[i];
+ rd[i].rdes3 = (uint32_t)&rd[(i + 1) % STM32_MAC_RECEIVE_BUFFERS];
+ }
+ for (i = 0; i < STM32_MAC_TRANSMIT_BUFFERS; i++) {
+ td[i].tdes1 = 0;
+ td[i].tdes2 = (uint32_t)tb[i];
+ td[i].tdes3 = (uint32_t)&td[(i + 1) % STM32_MAC_TRANSMIT_BUFFERS];
+ }
+
+ /* Selection of the RMII or MII mode based on info exported by board.h.*/
+#if defined(STM32F10X_CL)
+#if defined(BOARD_PHY_RMII)
+ AFIO->MAPR |= AFIO_MAPR_MII_RMII_SEL;
+#else
+ AFIO->MAPR &= ~AFIO_MAPR_MII_RMII_SEL;
+#endif
+#elif defined(STM32F2XX) || defined(STM32F4XX)
+#if defined(BOARD_PHY_RMII)
+ SYSCFG->PMC |= SYSCFG_PMC_MII_RMII_SEL;
+#else
+ SYSCFG->PMC &= ~SYSCFG_PMC_MII_RMII_SEL;
+#endif
+#else
+#error "unsupported STM32 platform for MAC driver"
+#endif
+
+ /* Reset of the MAC core.*/
+ rccResetETH();
+
+ /* MAC clocks temporary activation.*/
+ rccEnableETH(FALSE);
+
+ /* PHY address setup.*/
+#if defined(BOARD_PHY_ADDRESS)
+ ETHD1.phyaddr = BOARD_PHY_ADDRESS << 11;
+#else
+ mii_find_phy(ÐD1);
+#endif
+
+#if defined(BOARD_PHY_RESET)
+ /* PHY board-specific reset procedure.*/
+ BOARD_PHY_RESET();
+#else
+ /* PHY soft reset procedure.*/
+ mii_write(ÐD1, MII_BMCR, BMCR_RESET);
+#if defined(BOARD_PHY_RESET_DELAY)
+ halPolledDelay(BOARD_PHY_RESET_DELAY);
+#endif
+ while (mii_read(ÐD1, MII_BMCR) & BMCR_RESET)
+ ;
+#endif
+
+#if STM32_MAC_ETH1_CHANGE_PHY_STATE
+ /* PHY in power down mode until the driver will be started.*/
+ mii_write(ÐD1, MII_BMCR, mii_read(ÐD1, MII_BMCR) | BMCR_PDOWN);
+#endif
+
+ /* MAC clocks stopped again.*/
+ rccDisableETH(FALSE);
+}
+
+/**
+ * @brief Configures and activates the MAC peripheral.
+ *
+ * @param[in] macp pointer to the @p MACDriver object
+ *
+ * @notapi
+ */
+void mac_lld_start(MACDriver *macp) {
+ unsigned i;
+
+ /* Resets the state of all descriptors.*/
+ for (i = 0; i < STM32_MAC_RECEIVE_BUFFERS; i++)
+ rd[i].rdes0 = STM32_RDES0_OWN;
+ macp->rxptr = (stm32_eth_rx_descriptor_t *)rd;
+ for (i = 0; i < STM32_MAC_TRANSMIT_BUFFERS; i++)
+ td[i].tdes0 = STM32_TDES0_TCH;
+ macp->txptr = (stm32_eth_tx_descriptor_t *)td;
+
+ /* MAC clocks activation and commanded reset procedure.*/
+ rccEnableETH(FALSE);
+ ETH->DMABMR |= ETH_DMABMR_SR;
+ while(ETH->DMABMR & ETH_DMABMR_SR)
+ ;
+
+ /* ISR vector enabled.*/
+ nvicEnableVector(ETH_IRQn,
+ CORTEX_PRIORITY_MASK(STM32_MAC_ETH1_IRQ_PRIORITY));
+
+#if STM32_MAC_ETH1_CHANGE_PHY_STATE
+ /* PHY in power up mode.*/
+ mii_write(macp, MII_BMCR, mii_read(macp, MII_BMCR) & ~BMCR_PDOWN);
+#endif
+
+ /* MAC configuration.*/
+ ETH->MACFFR = 0;
+ ETH->MACFCR = 0;
+ ETH->MACVLANTR = 0;
+
+ /* MAC address setup.*/
+ if (macp->config->mac_address == NULL)
+ mac_lld_set_address(default_mac_address);
+ else
+ mac_lld_set_address(macp->config->mac_address);
+
+ /* Transmitter and receiver enabled.
+ Note that the complete setup of the MAC is performed when the link
+ status is detected.*/
+#if STM32_MAC_IP_CHECKSUM_OFFLOAD
+ ETH->MACCR = ETH_MACCR_IPCO | ETH_MACCR_RE | ETH_MACCR_TE;
+#else
+ ETH->MACCR = ETH_MACCR_RE | ETH_MACCR_TE;
+#endif
+
+ /* DMA configuration:
+ Descriptor chains pointers.*/
+ ETH->DMARDLAR = (uint32_t)rd;
+ ETH->DMATDLAR = (uint32_t)td;
+
+ /* Enabling required interrupt sources.*/
+ ETH->DMASR = ETH->DMASR;
+ ETH->DMAIER = ETH_DMAIER_NISE | ETH_DMAIER_RIE | ETH_DMAIER_TIE;
+
+ /* DMA general settings.*/
+ ETH->DMABMR = ETH_DMABMR_AAB | ETH_DMABMR_RDP_1Beat | ETH_DMABMR_PBL_1Beat;
+
+ /* Transmit FIFO flush.*/
+ ETH->DMAOMR = ETH_DMAOMR_FTF;
+ while (ETH->DMAOMR & ETH_DMAOMR_FTF)
+ ;
+
+ /* DMA final configuration and start.*/
+ ETH->DMAOMR = ETH_DMAOMR_DTCEFD | ETH_DMAOMR_RSF | ETH_DMAOMR_TSF |
+ ETH_DMAOMR_ST | ETH_DMAOMR_SR;
+}
+
+/**
+ * @brief Deactivates the MAC peripheral.
+ *
+ * @param[in] macp pointer to the @p MACDriver object
+ *
+ * @notapi
+ */
+void mac_lld_stop(MACDriver *macp) {
+
+ if (macp->state != MAC_STOP) {
+#if STM32_MAC_ETH1_CHANGE_PHY_STATE
+ /* PHY in power down mode until the driver will be restarted.*/
+ mii_write(macp, MII_BMCR, mii_read(macp, MII_BMCR) | BMCR_PDOWN);
+#endif
+
+ /* MAC and DMA stopped.*/
+ ETH->MACCR = 0;
+ ETH->DMAOMR = 0;
+ ETH->DMAIER = 0;
+ ETH->DMASR = ETH->DMASR;
+
+ /* MAC clocks stopped.*/
+ rccDisableETH(FALSE);
+
+ /* ISR vector disabled.*/
+ nvicDisableVector(ETH_IRQn);
+ }
+}
+
+/**
+ * @brief Returns a transmission descriptor.
+ * @details One of the available transmission descriptors is locked and
+ * returned.
+ *
+ * @param[in] macp pointer to the @p MACDriver object
+ * @param[out] tdp pointer to a @p MACTransmitDescriptor structure
+ * @return The operation status.
+ * @retval RDY_OK the descriptor has been obtained.
+ * @retval RDY_TIMEOUT descriptor not available.
+ *
+ * @notapi
+ */
+msg_t mac_lld_get_transmit_descriptor(MACDriver *macp,
+ MACTransmitDescriptor *tdp) {
+ stm32_eth_tx_descriptor_t *tdes;
+
+ if (!macp->link_up)
+ return RDY_TIMEOUT;
+
+ chSysLock();
+
+ /* Get Current TX descriptor.*/
+ tdes = macp->txptr;
+
+ /* Ensure that descriptor isn't owned by the Ethernet DMA or locked by
+ another thread.*/
+ if (tdes->tdes0 & (STM32_TDES0_OWN | STM32_TDES0_LOCKED)) {
+ chSysUnlock();
+ return RDY_TIMEOUT;
+ }
+
+ /* Marks the current descriptor as locked using a reserved bit.*/
+ tdes->tdes0 |= STM32_TDES0_LOCKED;
+
+ /* Next TX descriptor to use.*/
+ macp->txptr = (stm32_eth_tx_descriptor_t *)tdes->tdes3;
+
+ chSysUnlock();
+
+ /* Set the buffer size and configuration.*/
+ tdp->offset = 0;
+ tdp->size = STM32_MAC_BUFFERS_SIZE;
+ tdp->physdesc = tdes;
+
+ return RDY_OK;
+}
+
+/**
+ * @brief Releases a transmit descriptor and starts the transmission of the
+ * enqueued data as a single frame.
+ *
+ * @param[in] tdp the pointer to the @p MACTransmitDescriptor structure
+ *
+ * @notapi
+ */
+void mac_lld_release_transmit_descriptor(MACTransmitDescriptor *tdp) {
+
+ chDbgAssert(!(tdp->physdesc->tdes0 & STM32_TDES0_OWN),
+ "mac_lld_release_transmit_descriptor(), #1",
+ "attempt to release descriptor already owned by DMA");
+
+ chSysLock();
+
+ /* Unlocks the descriptor and returns it to the DMA engine.*/
+ tdp->physdesc->tdes1 = tdp->offset;
+ tdp->physdesc->tdes0 = STM32_TDES0_CIC(STM32_MAC_IP_CHECKSUM_OFFLOAD) |
+ STM32_TDES0_IC | STM32_TDES0_LS | STM32_TDES0_FS |
+ STM32_TDES0_TCH | STM32_TDES0_OWN;
+
+ /* If the DMA engine is stalled then a restart request is issued.*/
+ if ((ETH->DMASR & ETH_DMASR_TPS) == ETH_DMASR_TPS_Suspended) {
+ ETH->DMASR = ETH_DMASR_TBUS;
+ ETH->DMATPDR = ETH_DMASR_TBUS; /* Any value is OK.*/
+ }
+
+ chSysUnlock();
+}
+
+/**
+ * @brief Returns a receive descriptor.
+ *
+ * @param[in] macp pointer to the @p MACDriver object
+ * @param[out] rdp pointer to a @p MACReceiveDescriptor structure
+ * @return The operation status.
+ * @retval RDY_OK the descriptor has been obtained.
+ * @retval RDY_TIMEOUT descriptor not available.
+ *
+ * @notapi
+ */
+msg_t mac_lld_get_receive_descriptor(MACDriver *macp,
+ MACReceiveDescriptor *rdp) {
+ stm32_eth_rx_descriptor_t *rdes;
+
+ chSysLock();
+
+ /* Get Current RX descriptor.*/
+ rdes = macp->rxptr;
+
+ /* Iterates through received frames until a valid one is found, invalid
+ frames are discarded.*/
+ while (!(rdes->rdes0 & STM32_RDES0_OWN)) {
+ if (!(rdes->rdes0 & (STM32_RDES0_AFM | STM32_RDES0_ES))
+#if STM32_MAC_IP_CHECKSUM_OFFLOAD
+ && (rdes->rdes0 & STM32_RDES0_FT)
+ && !(rdes->rdes0 & (STM32_RDES0_IPHCE | STM32_RDES0_PCE))
+#endif
+ && (rdes->rdes0 & STM32_RDES0_FS) && (rdes->rdes0 & STM32_RDES0_LS)) {
+ /* Found a valid one.*/
+ rdp->offset = 0;
+ rdp->size = ((rdes->rdes0 & STM32_RDES0_FL_MASK) >> 16) - 4;
+ rdp->physdesc = rdes;
+ macp->rxptr = (stm32_eth_rx_descriptor_t *)rdes->rdes3;
+
+ chSysUnlock();
+ return RDY_OK;
+ }
+ /* Invalid frame found, purging.*/
+ rdes->rdes0 = STM32_RDES0_OWN;
+ rdes = (stm32_eth_rx_descriptor_t *)rdes->rdes3;
+ }
+
+ /* Next descriptor to check.*/
+ macp->rxptr = rdes;
+
+ chSysUnlock();
+ return RDY_TIMEOUT;
+}
+
+/**
+ * @brief Releases a receive descriptor.
+ * @details The descriptor and its buffer are made available for more incoming
+ * frames.
+ *
+ * @param[in] rdp the pointer to the @p MACReceiveDescriptor structure
+ *
+ * @notapi
+ */
+void mac_lld_release_receive_descriptor(MACReceiveDescriptor *rdp) {
+
+ chDbgAssert(!(rdp->physdesc->rdes0 & STM32_RDES0_OWN),
+ "mac_lld_release_receive_descriptor(), #1",
+ "attempt to release descriptor already owned by DMA");
+
+ chSysLock();
+
+ /* Give buffer back to the Ethernet DMA.*/
+ rdp->physdesc->rdes0 = STM32_RDES0_OWN;
+
+ /* If the DMA engine is stalled then a restart request is issued.*/
+ if ((ETH->DMASR & ETH_DMASR_RPS) == ETH_DMASR_RPS_Suspended) {
+ ETH->DMASR = ETH_DMASR_RBUS;
+ ETH->DMARPDR = ETH_DMASR_RBUS; /* Any value is OK.*/
+ }
+
+ chSysUnlock();
+}
+
+/**
+ * @brief Updates and returns the link status.
+ *
+ * @param[in] macp pointer to the @p MACDriver object
+ * @return The link status.
+ * @retval TRUE if the link is active.
+ * @retval FALSE if the link is down.
+ *
+ * @notapi
+ */
+bool_t mac_lld_poll_link_status(MACDriver *macp) {
+ uint32_t maccr, bmsr, bmcr;
+
+ maccr = ETH->MACCR;
+
+ /* PHY CR and SR registers read.*/
+ (void)mii_read(macp, MII_BMSR);
+ bmsr = mii_read(macp, MII_BMSR);
+ bmcr = mii_read(macp, MII_BMCR);
+
+ /* Check on auto-negotiation mode.*/
+ if (bmcr & BMCR_ANENABLE) {
+ uint32_t lpa;
+
+ /* Auto-negotiation must be finished without faults and link established.*/
+ if ((bmsr & (BMSR_LSTATUS | BMSR_RFAULT | BMSR_ANEGCOMPLETE)) !=
+ (BMSR_LSTATUS | BMSR_ANEGCOMPLETE))
+ return macp->link_up = FALSE;
+
+ /* Auto-negotiation enabled, checks the LPA register.*/
+ lpa = mii_read(macp, MII_LPA);
+
+ /* Check on link speed.*/
+ if (lpa & (LPA_100HALF | LPA_100FULL | LPA_100BASE4))
+ maccr |= ETH_MACCR_FES;
+ else
+ maccr &= ~ETH_MACCR_FES;
+
+ /* Check on link mode.*/
+ if (lpa & (LPA_10FULL | LPA_100FULL))
+ maccr |= ETH_MACCR_DM;
+ else
+ maccr &= ~ETH_MACCR_DM;
+ }
+ else {
+ /* Link must be established.*/
+ if (!(bmsr & BMSR_LSTATUS))
+ return macp->link_up = FALSE;
+
+ /* Check on link speed.*/
+ if (bmcr & BMCR_SPEED100)
+ maccr |= ETH_MACCR_FES;
+ else
+ maccr &= ~ETH_MACCR_FES;
+
+ /* Check on link mode.*/
+ if (bmcr & BMCR_FULLDPLX)
+ maccr |= ETH_MACCR_DM;
+ else
+ maccr &= ~ETH_MACCR_DM;
+ }
+
+ /* Changes the mode in the MAC.*/
+ ETH->MACCR = maccr;
+
+ /* Returns the link status.*/
+ return macp->link_up = TRUE;
+}
+
+/**
+ * @brief Writes to a transmit descriptor's stream.
+ *
+ * @param[in] tdp pointer to a @p MACTransmitDescriptor structure
+ * @param[in] buf pointer to the buffer containing the data to be
+ * written
+ * @param[in] size number of bytes to be written
+ * @return The number of bytes written into the descriptor's
+ * stream, this value can be less than the amount
+ * specified in the parameter @p size if the maximum
+ * frame size is reached.
+ *
+ * @notapi
+ */
+size_t mac_lld_write_transmit_descriptor(MACTransmitDescriptor *tdp,
+ uint8_t *buf,
+ size_t size) {
+
+ chDbgAssert(!(tdp->physdesc->tdes0 & STM32_TDES0_OWN),
+ "mac_lld_write_transmit_descriptor(), #1",
+ "attempt to write descriptor already owned by DMA");
+
+ if (size > tdp->size - tdp->offset)
+ size = tdp->size - tdp->offset;
+
+ if (size > 0) {
+ memcpy((uint8_t *)(tdp->physdesc->tdes2) + tdp->offset, buf, size);
+ tdp->offset += size;
+ }
+ return size;
+}
+
+/**
+ * @brief Reads from a receive descriptor's stream.
+ *
+ * @param[in] rdp pointer to a @p MACReceiveDescriptor structure
+ * @param[in] buf pointer to the buffer that will receive the read data
+ * @param[in] size number of bytes to be read
+ * @return The number of bytes read from the descriptor's
+ * stream, this value can be less than the amount
+ * specified in the parameter @p size if there are
+ * no more bytes to read.
+ *
+ * @notapi
+ */
+size_t mac_lld_read_receive_descriptor(MACReceiveDescriptor *rdp,
+ uint8_t *buf,
+ size_t size) {
+
+ chDbgAssert(!(rdp->physdesc->rdes0 & STM32_RDES0_OWN),
+ "mac_lld_read_receive_descriptor(), #1",
+ "attempt to read descriptor already owned by DMA");
+
+ if (size > rdp->size - rdp->offset)
+ size = rdp->size - rdp->offset;
+
+ if (size > 0) {
+ memcpy(buf, (uint8_t *)(rdp->physdesc->rdes2) + rdp->offset, size);
+ rdp->offset += size;
+ }
+ return size;
+}
+
+#if MAC_USE_ZERO_COPY || defined(__DOXYGEN__)
+/**
+ * @brief Returns a pointer to the next transmit buffer in the descriptor
+ * chain.
+ * @note The API guarantees that enough buffers can be requested to fill
+ * a whole frame.
+ *
+ * @param[in] tdp pointer to a @p MACTransmitDescriptor structure
+ * @param[in] size size of the requested buffer. Specify the frame size
+ * on the first call then scale the value down subtracting
+ * the amount of data already copied into the previous
+ * buffers.
+ * @param[out] sizep pointer to variable receiving the buffer size, it is
+ * zero when the last buffer has already been returned.
+ * Note that a returned size lower than the amount
+ * requested means that more buffers must be requested
+ * in order to fill the frame data entirely.
+ * @return Pointer to the returned buffer.
+ * @retval NULL if the buffer chain has been entirely scanned.
+ *
+ * @notapi
+ */
+uint8_t *mac_lld_get_next_transmit_buffer(MACTransmitDescriptor *tdp,
+ size_t size,
+ size_t *sizep) {
+
+ if (tdp->offset == 0) {
+ *sizep = tdp->size;
+ tdp->offset = size;
+ return (uint8_t *)tdp->physdesc->tdes2;
+ }
+ *sizep = 0;
+ return NULL;
+}
+
+/**
+ * @brief Returns a pointer to the next receive buffer in the descriptor
+ * chain.
+ * @note The API guarantees that the descriptor chain contains a whole
+ * frame.
+ *
+ * @param[in] rdp pointer to a @p MACReceiveDescriptor structure
+ * @param[out] sizep pointer to variable receiving the buffer size, it is
+ * zero when the last buffer has already been returned.
+ * @return Pointer to the returned buffer.
+ * @retval NULL if the buffer chain has been entirely scanned.
+ *
+ * @notapi
+ */
+const uint8_t *mac_lld_get_next_receive_buffer(MACReceiveDescriptor *rdp,
+ size_t *sizep) {
+
+ if (rdp->size > 0) {
+ *sizep = rdp->size;
+ rdp->offset = rdp->size;
+ rdp->size = 0;
+ return (uint8_t *)rdp->physdesc->rdes2;
+ }
+ *sizep = 0;
+ return NULL;
+}
+#endif /* MAC_USE_ZERO_COPY */
+
+#endif /* HAL_USE_MAC */
+
+/** @} */
diff --git a/os/hal/platforms/STM32/mac_lld.h b/os/hal/platforms/STM32/mac_lld.h new file mode 100644 index 000000000..bde7e0345 --- /dev/null +++ b/os/hal/platforms/STM32/mac_lld.h @@ -0,0 +1,362 @@ +/*
+ ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+/**
+ * @file STM32/mac_lld.h
+ * @brief STM32 low level MAC driver header.
+ *
+ * @addtogroup MAC
+ * @{
+ */
+
+#ifndef _MAC_LLD_H_
+#define _MAC_LLD_H_
+
+#if HAL_USE_MAC || defined(__DOXYGEN__)
+
+/*===========================================================================*/
+/* Driver constants. */
+/*===========================================================================*/
+
+/**
+ * @brief This implementation supports the zero-copy mode API.
+ */
+#define MAC_SUPPORTS_ZERO_COPY TRUE
+
+/**
+ * @name RDES0 constants
+ * @{
+ */
+#define STM32_RDES0_OWN 0x80000000
+#define STM32_RDES0_AFM 0x40000000
+#define STM32_RDES0_FL_MASK 0x3FFF0000
+#define STM32_RDES0_ES 0x00008000
+#define STM32_RDES0_DESERR 0x00004000
+#define STM32_RDES0_SAF 0x00002000
+#define STM32_RDES0_LE 0x00001000
+#define STM32_RDES0_OE 0x00000800
+#define STM32_RDES0_VLAN 0x00000400
+#define STM32_RDES0_FS 0x00000200
+#define STM32_RDES0_LS 0x00000100
+#define STM32_RDES0_IPHCE 0x00000080
+#define STM32_RDES0_LCO 0x00000040
+#define STM32_RDES0_FT 0x00000020
+#define STM32_RDES0_RWT 0x00000010
+#define STM32_RDES0_RE 0x00000008
+#define STM32_RDES0_DE 0x00000004
+#define STM32_RDES0_CE 0x00000002
+#define STM32_RDES0_PCE 0x00000001
+/** @} */
+
+/**
+ * @name RDES1 constants
+ * @{
+ */
+#define STM32_RDES1_DIC 0x80000000
+#define STM32_RDES1_RBS2_MASK 0x1FFF0000
+#define STM32_RDES1_RER 0x00008000
+#define STM32_RDES1_RCH 0x00004000
+#define STM32_RDES1_RBS1_MASK 0x00001FFF
+/** @} */
+
+/**
+ * @name TDES0 constants
+ * @{
+ */
+#define STM32_TDES0_OWN 0x80000000
+#define STM32_TDES0_IC 0x40000000
+#define STM32_TDES0_LS 0x20000000
+#define STM32_TDES0_FS 0x10000000
+#define STM32_TDES0_DC 0x08000000
+#define STM32_TDES0_DP 0x04000000
+#define STM32_TDES0_TTSE 0x02000000
+#define STM32_TDES0_LOCKED 0x01000000 /* NOTE: Pseudo flag. */
+#define STM32_TDES0_CIC_MASK 0x00C00000
+#define STM32_TDES0_CIC(n) ((n) << 22)
+#define STM32_TDES0_TER 0x00200000
+#define STM32_TDES0_TCH 0x00100000
+#define STM32_TDES0_TTSS 0x00020000
+#define STM32_TDES0_IHE 0x00010000
+#define STM32_TDES0_ES 0x00008000
+#define STM32_TDES0_JT 0x00004000
+#define STM32_TDES0_FF 0x00002000
+#define STM32_TDES0_IPE 0x00001000
+#define STM32_TDES0_LCA 0x00000800
+#define STM32_TDES0_NC 0x00000400
+#define STM32_TDES0_LCO 0x00000200
+#define STM32_TDES0_EC 0x00000100
+#define STM32_TDES0_VF 0x00000080
+#define STM32_TDES0_CC_MASK 0x00000078
+#define STM32_TDES0_ED 0x00000004
+#define STM32_TDES0_UF 0x00000002
+#define STM32_TDES0_DB 0x00000001
+/** @} */
+
+/**
+ * @name TDES1 constants
+ * @{
+ */
+#define STM32_TDES1_TBS2_MASK 0x1FFF0000
+#define STM32_TDES1_TBS1_MASK 0x00001FFF
+/** @} */
+
+/*===========================================================================*/
+/* Driver pre-compile time settings. */
+/*===========================================================================*/
+
+/**
+ * @name Configuration options
+ * @{
+ */
+/**
+ * @brief Number of available transmit buffers.
+ */
+#if !defined(STM32_MAC_TRANSMIT_BUFFERS) || defined(__DOXYGEN__)
+#define STM32_MAC_TRANSMIT_BUFFERS 2
+#endif
+
+/**
+ * @brief Number of available receive buffers.
+ */
+#if !defined(STM32_MAC_RECEIVE_BUFFERS) || defined(__DOXYGEN__)
+#define STM32_MAC_RECEIVE_BUFFERS 4
+#endif
+
+/**
+ * @brief Maximum supported frame size.
+ */
+#if !defined(STM32_MAC_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define STM32_MAC_BUFFERS_SIZE 1522
+#endif
+
+/**
+ * @brief PHY detection timeout.
+ * @details Timeout, in milliseconds, for PHY address detection, if a PHY
+ * is not detected within the timeout then the driver halts during
+ * initialization. This setting applies only if the PHY address is
+ * not explicitly set in the board header file using
+ * @p BOARD_PHY_ADDRESS. A zero value disables the timeout and a
+ * single search path is performed.
+ */
+#if !defined(STM32_MAC_PHY_TIMEOUT) || defined(__DOXYGEN__)
+#define STM32_MAC_PHY_TIMEOUT 100
+#endif
+
+/**
+ * @brief Change the PHY power state inside the driver.
+ */
+#if !defined(STM32_MAC_ETH1_CHANGE_PHY_STATE) || defined(__DOXYGEN__)
+#define STM32_MAC_ETH1_CHANGE_PHY_STATE TRUE
+#endif
+
+/**
+ * @brief ETHD1 interrupt priority level setting.
+ */
+#if !defined(STM32_MAC_ETH1_IRQ_PRIORITY) || defined(__DOXYGEN__)
+#define STM32_MAC_ETH1_IRQ_PRIORITY 13
+#endif
+
+/**
+ * @brief IP checksum offload.
+ * @details The following modes are available:
+ * - 0 Function disabled.
+ * - 1 Only IP header checksum calculation and insertion are enabled.
+ * - 2 IP header checksum and payload checksum calculation and
+ * insertion are enabled, but pseudo-header checksum is not
+ * calculated in hardware.
+ * - 3 IP Header checksum and payload checksum calculation and
+ * insertion are enabled, and pseudo-header checksum is
+ * calculated in hardware.
+ * .
+ */
+#if !defined(STM32_MAC_IP_CHECKSUM_OFFLOAD) || defined(__DOXYGEN__)
+#define STM32_MAC_IP_CHECKSUM_OFFLOAD 0
+#endif
+/** @} */
+
+/*===========================================================================*/
+/* Derived constants and error checks. */
+/*===========================================================================*/
+
+#if (STM32_MAC_PHY_TIMEOUT > 0) && !HAL_IMPLEMENTS_COUNTERS
+#error "STM32_MAC_PHY_TIMEOUT requires the realtime counter service"
+#endif
+
+/*===========================================================================*/
+/* Driver data structures and types. */
+/*===========================================================================*/
+
+/**
+ * @brief Type of an STM32 Ethernet receive descriptor.
+ */
+typedef struct {
+ volatile uint32_t rdes0;
+ volatile uint32_t rdes1;
+ volatile uint32_t rdes2;
+ volatile uint32_t rdes3;
+} stm32_eth_rx_descriptor_t;
+
+/**
+ * @brief Type of an STM32 Ethernet transmit descriptor.
+ */
+typedef struct {
+ volatile uint32_t tdes0;
+ volatile uint32_t tdes1;
+ volatile uint32_t tdes2;
+ volatile uint32_t tdes3;
+} stm32_eth_tx_descriptor_t;
+
+/**
+ * @brief Driver configuration structure.
+ */
+typedef struct {
+ /**
+ * @brief MAC address.
+ */
+ uint8_t *mac_address;
+ /* End of the mandatory fields.*/
+} MACConfig;
+
+/**
+ * @brief Structure representing a MAC driver.
+ */
+struct MACDriver {
+ /**
+ * @brief Driver state.
+ */
+ macstate_t state;
+ /**
+ * @brief Current configuration data.
+ */
+ const MACConfig *config;
+ /**
+ * @brief Transmit semaphore.
+ */
+ Semaphore tdsem;
+ /**
+ * @brief Receive semaphore.
+ */
+ Semaphore rdsem;
+#if MAC_USE_EVENTS || defined(__DOXYGEN__)
+ /**
+ * @brief Receive event.
+ */
+ EventSource rdevent;
+#endif
+ /* End of the mandatory fields.*/
+ /**
+ * @brief Link status flag.
+ */
+ bool_t link_up;
+ /**
+ * @brief PHY address (pre shifted).
+ */
+ uint32_t phyaddr;
+ /**
+ * @brief Receive next frame pointer.
+ */
+ stm32_eth_rx_descriptor_t *rxptr;
+ /**
+ * @brief Transmit next frame pointer.
+ */
+ stm32_eth_tx_descriptor_t *txptr;
+};
+
+/**
+ * @brief Structure representing a transmit descriptor.
+ */
+typedef struct {
+ /**
+ * @brief Current write offset.
+ */
+ size_t offset;
+ /**
+ * @brief Available space size.
+ */
+ size_t size;
+ /* End of the mandatory fields.*/
+ /**
+ * @brief Pointer to the physical descriptor.
+ */
+ stm32_eth_tx_descriptor_t *physdesc;
+} MACTransmitDescriptor;
+
+/**
+ * @brief Structure representing a receive descriptor.
+ */
+typedef struct {
+ /**
+ * @brief Current read offset.
+ */
+ size_t offset;
+ /**
+ * @brief Available data size.
+ */
+ size_t size;
+ /* End of the mandatory fields.*/
+ /**
+ * @brief Pointer to the physical descriptor.
+ */
+ stm32_eth_rx_descriptor_t *physdesc;
+} MACReceiveDescriptor;
+
+/*===========================================================================*/
+/* Driver macros. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* External declarations. */
+/*===========================================================================*/
+
+#if !defined(__DOXYGEN__)
+extern MACDriver ETHD1;
+#endif
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+ void mac_lld_init(void);
+ void mac_lld_start(MACDriver *macp);
+ void mac_lld_stop(MACDriver *macp);
+ msg_t mac_lld_get_transmit_descriptor(MACDriver *macp,
+ MACTransmitDescriptor *tdp);
+ void mac_lld_release_transmit_descriptor(MACTransmitDescriptor *tdp);
+ msg_t mac_lld_get_receive_descriptor(MACDriver *macp,
+ MACReceiveDescriptor *rdp);
+ void mac_lld_release_receive_descriptor(MACReceiveDescriptor *rdp);
+ bool_t mac_lld_poll_link_status(MACDriver *macp);
+ size_t mac_lld_write_transmit_descriptor(MACTransmitDescriptor *tdp,
+ uint8_t *buf,
+ size_t size);
+ size_t mac_lld_read_receive_descriptor(MACReceiveDescriptor *rdp,
+ uint8_t *buf,
+ size_t size);
+#if MAC_USE_ZERO_COPY
+ uint8_t *mac_lld_get_next_transmit_buffer(MACTransmitDescriptor *tdp,
+ size_t size,
+ size_t *sizep);
+ const uint8_t *mac_lld_get_next_receive_buffer(MACReceiveDescriptor *rdp,
+ size_t *sizep);
+#endif /* MAC_USE_ZERO_COPY */
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* HAL_USE_MAC */
+
+#endif /* _MAC_LLD_H_ */
+
+/** @} */
diff --git a/os/hal/platforms/STM32/pwm_lld.c b/os/hal/platforms/STM32/pwm_lld.c new file mode 100644 index 000000000..a8850924f --- /dev/null +++ b/os/hal/platforms/STM32/pwm_lld.c @@ -0,0 +1,699 @@ +/*
+ ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+/**
+ * @file STM32/pwm_lld.c
+ * @brief STM32 PWM subsystem low level driver header.
+ *
+ * @addtogroup PWM
+ * @{
+ */
+
+#include "hal.h"
+
+#if HAL_USE_PWM || defined(__DOXYGEN__)
+
+/*===========================================================================*/
+/* Driver local definitions. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver exported variables. */
+/*===========================================================================*/
+
+/**
+ * @brief PWMD1 driver identifier.
+ * @note The driver PWMD1 allocates the complex timer TIM1 when enabled.
+ */
+#if STM32_PWM_USE_TIM1 || defined(__DOXYGEN__)
+PWMDriver PWMD1;
+#endif
+
+/**
+ * @brief PWMD2 driver identifier.
+ * @note The driver PWMD2 allocates the timer TIM2 when enabled.
+ */
+#if STM32_PWM_USE_TIM2 || defined(__DOXYGEN__)
+PWMDriver PWMD2;
+#endif
+
+/**
+ * @brief PWMD3 driver identifier.
+ * @note The driver PWMD3 allocates the timer TIM3 when enabled.
+ */
+#if STM32_PWM_USE_TIM3 || defined(__DOXYGEN__)
+PWMDriver PWMD3;
+#endif
+
+/**
+ * @brief PWMD4 driver identifier.
+ * @note The driver PWMD4 allocates the timer TIM4 when enabled.
+ */
+#if STM32_PWM_USE_TIM4 || defined(__DOXYGEN__)
+PWMDriver PWMD4;
+#endif
+
+/**
+ * @brief PWMD5 driver identifier.
+ * @note The driver PWMD5 allocates the timer TIM5 when enabled.
+ */
+#if STM32_PWM_USE_TIM5 || defined(__DOXYGEN__)
+PWMDriver PWMD5;
+#endif
+
+/**
+ * @brief PWMD8 driver identifier.
+ * @note The driver PWMD8 allocates the timer TIM8 when enabled.
+ */
+#if STM32_PWM_USE_TIM8 || defined(__DOXYGEN__)
+PWMDriver PWMD8;
+#endif
+
+/**
+ * @brief PWMD9 driver identifier.
+ * @note The driver PWMD9 allocates the timer TIM9 when enabled.
+ */
+#if STM32_PWM_USE_TIM9 || defined(__DOXYGEN__)
+PWMDriver PWMD9;
+#endif
+
+/*===========================================================================*/
+/* Driver local variables and types. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver local functions. */
+/*===========================================================================*/
+
+#if STM32_PWM_USE_TIM2 || STM32_PWM_USE_TIM3 || STM32_PWM_USE_TIM4 || \
+ STM32_PWM_USE_TIM5 || STM32_PWM_USE_TIM9 || defined(__DOXYGEN__)
+/**
+ * @brief Common TIM2...TIM5,TIM9 IRQ handler.
+ * @note It is assumed that the various sources are only activated if the
+ * associated callback pointer is not equal to @p NULL in order to not
+ * perform an extra check in a potentially critical interrupt handler.
+ *
+ * @param[in] pwmp pointer to a @p PWMDriver object
+ */
+static void pwm_lld_serve_interrupt(PWMDriver *pwmp) {
+ uint16_t sr;
+
+ sr = pwmp->tim->SR;
+ sr &= pwmp->tim->DIER;
+ pwmp->tim->SR = ~sr;
+ if ((sr & TIM_SR_CC1IF) != 0)
+ pwmp->config->channels[0].callback(pwmp);
+ if ((sr & TIM_SR_CC2IF) != 0)
+ pwmp->config->channels[1].callback(pwmp);
+ if ((sr & TIM_SR_CC3IF) != 0)
+ pwmp->config->channels[2].callback(pwmp);
+ if ((sr & TIM_SR_CC4IF) != 0)
+ pwmp->config->channels[3].callback(pwmp);
+ if ((sr & TIM_SR_UIF) != 0)
+ pwmp->config->callback(pwmp);
+}
+#endif
+
+/*===========================================================================*/
+/* Driver interrupt handlers. */
+/*===========================================================================*/
+
+#if STM32_PWM_USE_TIM1
+#if !defined(STM32_TIM1_UP_HANDLER)
+#error "STM32_TIM1_UP_HANDLER not defined"
+#endif
+/**
+ * @brief TIM1 update interrupt handler.
+ * @note It is assumed that this interrupt is only activated if the callback
+ * pointer is not equal to @p NULL in order to not perform an extra
+ * check in a potentially critical interrupt handler.
+ *
+ * @isr
+ */
+CH_IRQ_HANDLER(STM32_TIM1_UP_HANDLER) {
+
+ CH_IRQ_PROLOGUE();
+
+ STM32_TIM1->SR = ~TIM_SR_UIF;
+ PWMD1.config->callback(&PWMD1);
+
+ CH_IRQ_EPILOGUE();
+}
+
+#if !defined(STM32_TIM1_CC_HANDLER)
+#error "STM32_TIM1_CC_HANDLER not defined"
+#endif
+/**
+ * @brief TIM1 compare interrupt handler.
+ * @note It is assumed that the various sources are only activated if the
+ * associated callback pointer is not equal to @p NULL in order to not
+ * perform an extra check in a potentially critical interrupt handler.
+ *
+ * @isr
+ */
+CH_IRQ_HANDLER(STM32_TIM1_CC_HANDLER) {
+ uint16_t sr;
+
+ CH_IRQ_PROLOGUE();
+
+ sr = STM32_TIM1->SR & STM32_TIM1->DIER;
+ STM32_TIM1->SR = ~(TIM_SR_CC1IF | TIM_SR_CC2IF |
+ TIM_SR_CC3IF | TIM_SR_CC4IF);
+ if ((sr & TIM_SR_CC1IF) != 0)
+ PWMD1.config->channels[0].callback(&PWMD1);
+ if ((sr & TIM_SR_CC2IF) != 0)
+ PWMD1.config->channels[1].callback(&PWMD1);
+ if ((sr & TIM_SR_CC3IF) != 0)
+ PWMD1.config->channels[2].callback(&PWMD1);
+ if ((sr & TIM_SR_CC4IF) != 0)
+ PWMD1.config->channels[3].callback(&PWMD1);
+
+ CH_IRQ_EPILOGUE();
+}
+#endif /* STM32_PWM_USE_TIM1 */
+
+#if STM32_PWM_USE_TIM2
+#if !defined(STM32_TIM2_HANDLER)
+#error "STM32_TIM2_HANDLER not defined"
+#endif
+/**
+ * @brief TIM2 interrupt handler.
+ *
+ * @isr
+ */
+CH_IRQ_HANDLER(STM32_TIM2_HANDLER) {
+
+ CH_IRQ_PROLOGUE();
+
+ pwm_lld_serve_interrupt(&PWMD2);
+
+ CH_IRQ_EPILOGUE();
+}
+#endif /* STM32_PWM_USE_TIM2 */
+
+#if STM32_PWM_USE_TIM3
+#if !defined(STM32_TIM3_HANDLER)
+#error "STM32_TIM3_HANDLER not defined"
+#endif
+/**
+ * @brief TIM3 interrupt handler.
+ *
+ * @isr
+ */
+CH_IRQ_HANDLER(STM32_TIM3_HANDLER) {
+
+ CH_IRQ_PROLOGUE();
+
+ pwm_lld_serve_interrupt(&PWMD3);
+
+ CH_IRQ_EPILOGUE();
+}
+#endif /* STM32_PWM_USE_TIM3 */
+
+#if STM32_PWM_USE_TIM4
+#if !defined(STM32_TIM4_HANDLER)
+#error "STM32_TIM4_HANDLER not defined"
+#endif
+/**
+ * @brief TIM4 interrupt handler.
+ *
+ * @isr
+ */
+CH_IRQ_HANDLER(STM32_TIM4_HANDLER) {
+
+ CH_IRQ_PROLOGUE();
+
+ pwm_lld_serve_interrupt(&PWMD4);
+
+ CH_IRQ_EPILOGUE();
+}
+#endif /* STM32_PWM_USE_TIM4 */
+
+#if STM32_PWM_USE_TIM5
+#if !defined(STM32_TIM5_HANDLER)
+#error "STM32_TIM5_HANDLER not defined"
+#endif
+/**
+ * @brief TIM5 interrupt handler.
+ *
+ * @isr
+ */
+CH_IRQ_HANDLER(STM32_TIM5_HANDLER) {
+
+ CH_IRQ_PROLOGUE();
+
+ pwm_lld_serve_interrupt(&PWMD5);
+
+ CH_IRQ_EPILOGUE();
+}
+#endif /* STM32_PWM_USE_TIM5 */
+
+#if STM32_PWM_USE_TIM8
+#if !defined(STM32_TIM8_UP_HANDLER)
+#error "STM32_TIM8_UP_HANDLER not defined"
+#endif
+/**
+ * @brief TIM8 update interrupt handler.
+ * @note It is assumed that this interrupt is only activated if the callback
+ * pointer is not equal to @p NULL in order to not perform an extra
+ * check in a potentially critical interrupt handler.
+ *
+ * @isr
+ */
+CH_IRQ_HANDLER(STM32_TIM8_UP_HANDLER) {
+
+ CH_IRQ_PROLOGUE();
+
+ STM32_TIM8->SR = ~TIM_SR_UIF;
+ PWMD8.config->callback(&PWMD8);
+
+ CH_IRQ_EPILOGUE();
+}
+
+#if !defined(STM32_TIM8_CC_HANDLER)
+#error "STM32_TIM8_CC_HANDLER not defined"
+#endif
+/**
+ * @brief TIM8 compare interrupt handler.
+ * @note It is assumed that the various sources are only activated if the
+ * associated callback pointer is not equal to @p NULL in order to not
+ * perform an extra check in a potentially critical interrupt handler.
+ *
+ * @isr
+ */
+CH_IRQ_HANDLER(STM32_TIM8_CC_HANDLER) {
+ uint16_t sr;
+
+ CH_IRQ_PROLOGUE();
+
+ sr = STM32_TIM8->SR & STM32_TIM8->DIER;
+ STM32_TIM8->SR = ~(TIM_SR_CC1IF | TIM_SR_CC2IF |
+ TIM_SR_CC3IF | TIM_SR_CC4IF);
+ if ((sr & TIM_SR_CC1IF) != 0)
+ PWMD8.config->channels[0].callback(&PWMD8);
+ if ((sr & TIM_SR_CC2IF) != 0)
+ PWMD8.config->channels[1].callback(&PWMD8);
+ if ((sr & TIM_SR_CC3IF) != 0)
+ PWMD8.config->channels[2].callback(&PWMD8);
+ if ((sr & TIM_SR_CC4IF) != 0)
+ PWMD8.config->channels[3].callback(&PWMD8);
+
+ CH_IRQ_EPILOGUE();
+}
+#endif /* STM32_PWM_USE_TIM8 */
+
+#if STM32_PWM_USE_TIM9
+#if !defined(STM32_TIM9_HANDLER)
+#error "STM32_TIM9_HANDLER not defined"
+#endif
+/**
+ * @brief TIM9 interrupt handler.
+ *
+ * @isr
+ */
+CH_IRQ_HANDLER(STM32_TIM9_HANDLER) {
+
+ CH_IRQ_PROLOGUE();
+
+ pwm_lld_serve_interrupt(&PWMD9);
+
+ CH_IRQ_EPILOGUE();
+}
+#endif /* STM32_PWM_USE_TIM9 */
+
+/*===========================================================================*/
+/* Driver exported functions. */
+/*===========================================================================*/
+
+/**
+ * @brief Low level PWM driver initialization.
+ *
+ * @notapi
+ */
+void pwm_lld_init(void) {
+
+#if STM32_PWM_USE_TIM1
+ /* Driver initialization.*/
+ pwmObjectInit(&PWMD1);
+ PWMD1.tim = STM32_TIM1;
+#endif
+
+#if STM32_PWM_USE_TIM2
+ /* Driver initialization.*/
+ pwmObjectInit(&PWMD2);
+ PWMD2.tim = STM32_TIM2;
+#endif
+
+#if STM32_PWM_USE_TIM3
+ /* Driver initialization.*/
+ pwmObjectInit(&PWMD3);
+ PWMD3.tim = STM32_TIM3;
+#endif
+
+#if STM32_PWM_USE_TIM4
+ /* Driver initialization.*/
+ pwmObjectInit(&PWMD4);
+ PWMD4.tim = STM32_TIM4;
+#endif
+
+#if STM32_PWM_USE_TIM5
+ /* Driver initialization.*/
+ pwmObjectInit(&PWMD5);
+ PWMD5.tim = STM32_TIM5;
+#endif
+
+#if STM32_PWM_USE_TIM8
+ /* Driver initialization.*/
+ pwmObjectInit(&PWMD8);
+ PWMD8.tim = STM32_TIM8;
+#endif
+
+#if STM32_PWM_USE_TIM9
+ /* Driver initialization.*/
+ pwmObjectInit(&PWMD9);
+ PWMD9.tim = STM32_TIM9;
+#endif
+}
+
+/**
+ * @brief Configures and activates the PWM peripheral.
+ * @note Starting a driver that is already in the @p PWM_READY state
+ * disables all the active channels.
+ *
+ * @param[in] pwmp pointer to a @p PWMDriver object
+ *
+ * @notapi
+ */
+void pwm_lld_start(PWMDriver *pwmp) {
+ uint32_t psc;
+ uint16_t ccer;
+
+ if (pwmp->state == PWM_STOP) {
+ /* Clock activation and timer reset.*/
+#if STM32_PWM_USE_TIM1
+ if (&PWMD1 == pwmp) {
+ rccEnableTIM1(FALSE);
+ rccResetTIM1();
+ nvicEnableVector(STM32_TIM1_UP_NUMBER, STM32_PWM_TIM1_IRQ_PRIORITY);
+ nvicEnableVector(STM32_TIM1_CC_NUMBER, STM32_PWM_TIM1_IRQ_PRIORITY);
+ pwmp->clock = STM32_TIMCLK2;
+ }
+#endif
+#if STM32_PWM_USE_TIM2
+ if (&PWMD2 == pwmp) {
+ rccEnableTIM2(FALSE);
+ rccResetTIM2();
+ nvicEnableVector(STM32_TIM2_NUMBER, STM32_PWM_TIM2_IRQ_PRIORITY);
+ pwmp->clock = STM32_TIMCLK1;
+ }
+#endif
+#if STM32_PWM_USE_TIM3
+ if (&PWMD3 == pwmp) {
+ rccEnableTIM3(FALSE);
+ rccResetTIM3();
+ nvicEnableVector(STM32_TIM3_NUMBER, STM32_PWM_TIM3_IRQ_PRIORITY);
+ pwmp->clock = STM32_TIMCLK1;
+ }
+#endif
+#if STM32_PWM_USE_TIM4
+ if (&PWMD4 == pwmp) {
+ rccEnableTIM4(FALSE);
+ rccResetTIM4();
+ nvicEnableVector(STM32_TIM4_NUMBER, STM32_PWM_TIM4_IRQ_PRIORITY);
+ pwmp->clock = STM32_TIMCLK1;
+ }
+#endif
+
+#if STM32_PWM_USE_TIM5
+ if (&PWMD5 == pwmp) {
+ rccEnableTIM5(FALSE);
+ rccResetTIM5();
+ nvicEnableVector(STM32_TIM5_NUMBER, STM32_PWM_TIM5_IRQ_PRIORITY);
+ pwmp->clock = STM32_TIMCLK1;
+ }
+#endif
+#if STM32_PWM_USE_TIM8
+ if (&PWMD8 == pwmp) {
+ rccEnableTIM8(FALSE);
+ rccResetTIM8();
+ nvicEnableVector(STM32_TIM8_UP_NUMBER, STM32_PWM_TIM8_IRQ_PRIORITY);
+ nvicEnableVector(STM32_TIM8_CC_NUMBER, STM32_PWM_TIM8_IRQ_PRIORITY);
+ pwmp->clock = STM32_TIMCLK2;
+ }
+#endif
+#if STM32_PWM_USE_TIM9
+ if (&PWMD9 == pwmp) {
+ rccEnableTIM9(FALSE);
+ rccResetTIM9();
+ nvicEnableVector(STM32_TIM9_NUMBER, STM32_PWM_TIM9_IRQ_PRIORITY);
+ pwmp->clock = STM32_TIMCLK1;
+ }
+#endif
+
+ /* All channels configured in PWM1 mode with preload enabled and will
+ stay that way until the driver is stopped.*/
+ pwmp->tim->CCMR1 = TIM_CCMR1_OC1M_1 | TIM_CCMR1_OC1M_2 |
+ TIM_CCMR1_OC1PE |
+ TIM_CCMR1_OC2M_1 | TIM_CCMR1_OC2M_2 |
+ TIM_CCMR1_OC2PE;
+ pwmp->tim->CCMR2 = TIM_CCMR2_OC3M_1 | TIM_CCMR2_OC3M_2 |
+ TIM_CCMR2_OC3PE |
+ TIM_CCMR2_OC4M_1 | TIM_CCMR2_OC4M_2 |
+ TIM_CCMR2_OC4PE;
+ }
+ else {
+ /* Driver re-configuration scenario, it must be stopped first.*/
+ pwmp->tim->CR1 = 0; /* Timer disabled. */
+ pwmp->tim->DIER = 0; /* All IRQs disabled. */
+ pwmp->tim->SR = 0; /* Clear eventual pending IRQs. */
+ pwmp->tim->CCR[0] = 0; /* Comparator 1 disabled. */
+ pwmp->tim->CCR[1] = 0; /* Comparator 2 disabled. */
+ pwmp->tim->CCR[2] = 0; /* Comparator 3 disabled. */
+ pwmp->tim->CCR[3] = 0; /* Comparator 4 disabled. */
+ pwmp->tim->CNT = 0; /* Counter reset to zero. */
+ }
+
+ /* Timer configuration.*/
+ psc = (pwmp->clock / pwmp->config->frequency) - 1;
+ chDbgAssert((psc <= 0xFFFF) &&
+ ((psc + 1) * pwmp->config->frequency) == pwmp->clock,
+ "pwm_lld_start(), #1", "invalid frequency");
+ pwmp->tim->PSC = (uint16_t)psc;
+ pwmp->tim->ARR = (uint16_t)(pwmp->period - 1);
+ pwmp->tim->CR2 = pwmp->config->cr2;
+
+ /* Output enables and polarities setup.*/
+ ccer = 0;
+ switch (pwmp->config->channels[0].mode & PWM_OUTPUT_MASK) {
+ case PWM_OUTPUT_ACTIVE_LOW:
+ ccer |= TIM_CCER_CC1P;
+ case PWM_OUTPUT_ACTIVE_HIGH:
+ ccer |= TIM_CCER_CC1E;
+ default:
+ ;
+ }
+ switch (pwmp->config->channels[1].mode & PWM_OUTPUT_MASK) {
+ case PWM_OUTPUT_ACTIVE_LOW:
+ ccer |= TIM_CCER_CC2P;
+ case PWM_OUTPUT_ACTIVE_HIGH:
+ ccer |= TIM_CCER_CC2E;
+ default:
+ ;
+ }
+ switch (pwmp->config->channels[2].mode & PWM_OUTPUT_MASK) {
+ case PWM_OUTPUT_ACTIVE_LOW:
+ ccer |= TIM_CCER_CC3P;
+ case PWM_OUTPUT_ACTIVE_HIGH:
+ ccer |= TIM_CCER_CC3E;
+ default:
+ ;
+ }
+ switch (pwmp->config->channels[3].mode & PWM_OUTPUT_MASK) {
+ case PWM_OUTPUT_ACTIVE_LOW:
+ ccer |= TIM_CCER_CC4P;
+ case PWM_OUTPUT_ACTIVE_HIGH:
+ ccer |= TIM_CCER_CC4E;
+ default:
+ ;
+ }
+#if STM32_PWM_USE_ADVANCED
+#if STM32_PWM_USE_TIM1 && !STM32_PWM_USE_TIM8
+ if (&PWMD1 == pwmp) {
+#endif
+#if !STM32_PWM_USE_TIM1 && STM32_PWM_USE_TIM8
+ if (&PWMD8 == pwmp) {
+#endif
+#if STM32_PWM_USE_TIM1 && STM32_PWM_USE_TIM8
+ if ((&PWMD1 == pwmp) || (&PWMD8 == pwmp)) {
+#endif
+ switch (pwmp->config->channels[0].mode & PWM_COMPLEMENTARY_OUTPUT_MASK) {
+ case PWM_COMPLEMENTARY_OUTPUT_ACTIVE_LOW:
+ ccer |= TIM_CCER_CC1NP;
+ case PWM_COMPLEMENTARY_OUTPUT_ACTIVE_HIGH:
+ ccer |= TIM_CCER_CC1NE;
+ default:
+ ;
+ }
+ switch (pwmp->config->channels[1].mode & PWM_COMPLEMENTARY_OUTPUT_MASK) {
+ case PWM_COMPLEMENTARY_OUTPUT_ACTIVE_LOW:
+ ccer |= TIM_CCER_CC2NP;
+ case PWM_COMPLEMENTARY_OUTPUT_ACTIVE_HIGH:
+ ccer |= TIM_CCER_CC2NE;
+ default:
+ ;
+ }
+ switch (pwmp->config->channels[2].mode & PWM_COMPLEMENTARY_OUTPUT_MASK) {
+ case PWM_COMPLEMENTARY_OUTPUT_ACTIVE_LOW:
+ ccer |= TIM_CCER_CC3NP;
+ case PWM_COMPLEMENTARY_OUTPUT_ACTIVE_HIGH:
+ ccer |= TIM_CCER_CC3NE;
+ default:
+ ;
+ }
+ }
+#endif /* STM32_PWM_USE_ADVANCED*/
+
+ pwmp->tim->CCER = ccer;
+ pwmp->tim->EGR = TIM_EGR_UG; /* Update event. */
+ pwmp->tim->DIER = pwmp->config->callback == NULL ? 0 : TIM_DIER_UIE;
+ pwmp->tim->SR = 0; /* Clear pending IRQs. */
+#if STM32_PWM_USE_TIM1 || STM32_PWM_USE_TIM8
+#if STM32_PWM_USE_ADVANCED
+ pwmp->tim->BDTR = pwmp->config->bdtr | TIM_BDTR_MOE;
+#else
+ pwmp->tim->BDTR = TIM_BDTR_MOE;
+#endif
+#endif
+ /* Timer configured and started.*/
+ pwmp->tim->CR1 = TIM_CR1_ARPE | TIM_CR1_URS | TIM_CR1_CEN;
+}
+
+/**
+ * @brief Deactivates the PWM peripheral.
+ *
+ * @param[in] pwmp pointer to a @p PWMDriver object
+ *
+ * @notapi
+ */
+void pwm_lld_stop(PWMDriver *pwmp) {
+
+ /* If in ready state then disables the PWM clock.*/
+ if (pwmp->state == PWM_READY) {
+ pwmp->tim->CR1 = 0; /* Timer disabled. */
+ pwmp->tim->DIER = 0; /* All IRQs disabled. */
+ pwmp->tim->SR = 0; /* Clear eventual pending IRQs. */
+#if STM32_PWM_USE_TIM1 || STM32_PWM_USE_TIM8
+ pwmp->tim->BDTR = 0;
+#endif
+
+#if STM32_PWM_USE_TIM1
+ if (&PWMD1 == pwmp) {
+ nvicDisableVector(STM32_TIM1_UP_NUMBER);
+ nvicDisableVector(STM32_TIM1_CC_NUMBER);
+ rccDisableTIM1(FALSE);
+ }
+#endif
+#if STM32_PWM_USE_TIM2
+ if (&PWMD2 == pwmp) {
+ nvicDisableVector(STM32_TIM2_NUMBER);
+ rccDisableTIM2(FALSE);
+ }
+#endif
+#if STM32_PWM_USE_TIM3
+ if (&PWMD3 == pwmp) {
+ nvicDisableVector(STM32_TIM3_NUMBER);
+ rccDisableTIM3(FALSE);
+ }
+#endif
+#if STM32_PWM_USE_TIM4
+ if (&PWMD4 == pwmp) {
+ nvicDisableVector(STM32_TIM4_NUMBER);
+ rccDisableTIM4(FALSE);
+ }
+#endif
+#if STM32_PWM_USE_TIM5
+ if (&PWMD5 == pwmp) {
+ nvicDisableVector(STM32_TIM5_NUMBER);
+ rccDisableTIM5(FALSE);
+ }
+#endif
+#if STM32_PWM_USE_TIM8
+ if (&PWMD8 == pwmp) {
+ nvicDisableVector(STM32_TIM8_UP_NUMBER);
+ nvicDisableVector(STM32_TIM8_CC_NUMBER);
+ rccDisableTIM8(FALSE);
+ }
+#endif
+#if STM32_PWM_USE_TIM9
+ if (&PWMD9 == pwmp) {
+ nvicDisableVector(STM32_TIM9_NUMBER);
+ rccDisableTIM9(FALSE);
+ }
+#endif
+ }
+}
+
+/**
+ * @brief Enables a PWM channel.
+ * @pre The PWM unit must have been activated using @p pwmStart().
+ * @post The channel is active using the specified configuration.
+ * @note The function has effect at the next cycle start.
+ *
+ * @param[in] pwmp pointer to a @p PWMDriver object
+ * @param[in] channel PWM channel identifier (0...PWM_CHANNELS-1)
+ * @param[in] width PWM pulse width as clock pulses number
+ *
+ * @notapi
+ */
+void pwm_lld_enable_channel(PWMDriver *pwmp,
+ pwmchannel_t channel,
+ pwmcnt_t width) {
+
+ pwmp->tim->CCR[channel] = width; /* New duty cycle. */
+ /* If there is a callback defined for the channel then the associated
+ interrupt must be enabled.*/
+ if (pwmp->config->channels[channel].callback != NULL) {
+ uint32_t dier = pwmp->tim->DIER;
+ /* If the IRQ is not already enabled care must be taken to clear it,
+ it is probably already pending because the timer is running.*/
+ if ((dier & (2 << channel)) == 0) {
+ pwmp->tim->DIER = dier | (2 << channel);
+ pwmp->tim->SR = ~(2 << channel);
+ }
+ }
+}
+
+/**
+ * @brief Disables a PWM channel.
+ * @pre The PWM unit must have been activated using @p pwmStart().
+ * @post The channel is disabled and its output line returned to the
+ * idle state.
+ * @note The function has effect at the next cycle start.
+ *
+ * @param[in] pwmp pointer to a @p PWMDriver object
+ * @param[in] channel PWM channel identifier (0...PWM_CHANNELS-1)
+ *
+ * @notapi
+ */
+void pwm_lld_disable_channel(PWMDriver *pwmp, pwmchannel_t channel) {
+
+ pwmp->tim->CCR[channel] = 0;
+ pwmp->tim->DIER &= ~(2 << channel);
+}
+
+#endif /* HAL_USE_PWM */
+
+/** @} */
diff --git a/os/hal/platforms/STM32/pwm_lld.h b/os/hal/platforms/STM32/pwm_lld.h new file mode 100644 index 000000000..98e84945d --- /dev/null +++ b/os/hal/platforms/STM32/pwm_lld.h @@ -0,0 +1,472 @@ +/*
+ ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+/**
+ * @file STM32/pwm_lld.h
+ * @brief STM32 PWM subsystem low level driver header.
+ *
+ * @addtogroup PWM
+ * @{
+ */
+
+#ifndef _PWM_LLD_H_
+#define _PWM_LLD_H_
+
+#if HAL_USE_PWM || defined(__DOXYGEN__)
+
+/*===========================================================================*/
+/* Driver constants. */
+/*===========================================================================*/
+
+/**
+ * @brief Number of PWM channels per PWM driver.
+ */
+#define PWM_CHANNELS 4
+
+/**
+ * @brief Complementary output modes mask.
+ * @note This is an STM32-specific setting.
+ */
+#define PWM_COMPLEMENTARY_OUTPUT_MASK 0xF0
+
+/**
+ * @brief Complementary output not driven.
+ * @note This is an STM32-specific setting.
+ */
+#define PWM_COMPLEMENTARY_OUTPUT_DISABLED 0x00
+
+/**
+ * @brief Complementary output, active is logic level one.
+ * @note This is an STM32-specific setting.
+ * @note This setting is only available if the configuration option
+ * @p STM32_PWM_USE_ADVANCED is set to TRUE and only for advanced
+ * timers TIM1 and TIM8.
+ */
+#define PWM_COMPLEMENTARY_OUTPUT_ACTIVE_HIGH 0x10
+
+/**
+ * @brief Complementary output, active is logic level zero.
+ * @note This is an STM32-specific setting.
+ * @note This setting is only available if the configuration option
+ * @p STM32_PWM_USE_ADVANCED is set to TRUE and only for advanced
+ * timers TIM1 and TIM8.
+ */
+#define PWM_COMPLEMENTARY_OUTPUT_ACTIVE_LOW 0x20
+
+/*===========================================================================*/
+/* Driver pre-compile time settings. */
+/*===========================================================================*/
+
+/**
+ * @name Configuration options
+ * @{
+ */
+/**
+ * @brief If advanced timer features switch.
+ * @details If set to @p TRUE the advanced features for TIM1 and TIM8 are
+ * enabled.
+ * @note The default is @p TRUE.
+ */
+#if !defined(STM32_PWM_USE_ADVANCED) || defined(__DOXYGEN__)
+#define STM32_PWM_USE_ADVANCED FALSE
+#endif
+
+/**
+ * @brief PWMD1 driver enable switch.
+ * @details If set to @p TRUE the support for PWMD1 is included.
+ * @note The default is @p TRUE.
+ */
+#if !defined(STM32_PWM_USE_TIM1) || defined(__DOXYGEN__)
+#define STM32_PWM_USE_TIM1 FALSE
+#endif
+
+/**
+ * @brief PWMD2 driver enable switch.
+ * @details If set to @p TRUE the support for PWMD2 is included.
+ * @note The default is @p TRUE.
+ */
+#if !defined(STM32_PWM_USE_TIM2) || defined(__DOXYGEN__)
+#define STM32_PWM_USE_TIM2 FALSE
+#endif
+
+/**
+ * @brief PWMD3 driver enable switch.
+ * @details If set to @p TRUE the support for PWMD3 is included.
+ * @note The default is @p TRUE.
+ */
+#if !defined(STM32_PWM_USE_TIM3) || defined(__DOXYGEN__)
+#define STM32_PWM_USE_TIM3 FALSE
+#endif
+
+/**
+ * @brief PWMD4 driver enable switch.
+ * @details If set to @p TRUE the support for PWMD4 is included.
+ * @note The default is @p TRUE.
+ */
+#if !defined(STM32_PWM_USE_TIM4) || defined(__DOXYGEN__)
+#define STM32_PWM_USE_TIM4 FALSE
+#endif
+
+/**
+ * @brief PWMD5 driver enable switch.
+ * @details If set to @p TRUE the support for PWMD5 is included.
+ * @note The default is @p TRUE.
+ */
+#if !defined(STM32_PWM_USE_TIM5) || defined(__DOXYGEN__)
+#define STM32_PWM_USE_TIM5 FALSE
+#endif
+
+/**
+ * @brief PWMD8 driver enable switch.
+ * @details If set to @p TRUE the support for PWMD8 is included.
+ * @note The default is @p TRUE.
+ */
+#if !defined(STM32_PWM_USE_TIM8) || defined(__DOXYGEN__)
+#define STM32_PWM_USE_TIM8 FALSE
+#endif
+
+/**
+ * @brief PWMD9 driver enable switch.
+ * @details If set to @p TRUE the support for PWMD9 is included.
+ * @note The default is @p TRUE.
+ */
+#if !defined(STM32_PWM_USE_TIM9) || defined(__DOXYGEN__)
+#define STM32_PWM_USE_TIM9 FALSE
+#endif
+
+/**
+ * @brief PWMD1 interrupt priority level setting.
+ */
+#if !defined(STM32_PWM_TIM1_IRQ_PRIORITY) || defined(__DOXYGEN__)
+#define STM32_PWM_TIM1_IRQ_PRIORITY 7
+#endif
+
+/**
+ * @brief PWMD2 interrupt priority level setting.
+ */
+#if !defined(STM32_PWM_TIM2_IRQ_PRIORITY) || defined(__DOXYGEN__)
+#define STM32_PWM_TIM2_IRQ_PRIORITY 7
+#endif
+
+/**
+ * @brief PWMD3 interrupt priority level setting.
+ */
+#if !defined(STM32_PWM_TIM3_IRQ_PRIORITY) || defined(__DOXYGEN__)
+#define STM32_PWM_TIM3_IRQ_PRIORITY 7
+#endif
+
+/**
+ * @brief PWMD4 interrupt priority level setting.
+ */
+#if !defined(STM32_PWM_TIM4_IRQ_PRIORITY) || defined(__DOXYGEN__)
+#define STM32_PWM_TIM4_IRQ_PRIORITY 7
+#endif
+
+/**
+ * @brief PWMD5 interrupt priority level setting.
+ */
+#if !defined(STM32_PWM_TIM5_IRQ_PRIORITY) || defined(__DOXYGEN__)
+#define STM32_PWM_TIM5_IRQ_PRIORITY 7
+#endif
+
+/**
+ * @brief PWMD8 interrupt priority level setting.
+ */
+#if !defined(STM32_PWM_TIM8_IRQ_PRIORITY) || defined(__DOXYGEN__)
+#define STM32_PWM_TIM8_IRQ_PRIORITY 7
+#endif
+/** @} */
+
+/**
+ * @brief PWMD9 interrupt priority level setting.
+ */
+#if !defined(STM32_PWM_TIM9_IRQ_PRIORITY) || defined(__DOXYGEN__)
+#define STM32_PWM_TIM9_IRQ_PRIORITY 7
+#endif
+/** @} */
+
+/*===========================================================================*/
+/* Configuration checks. */
+/*===========================================================================*/
+
+#if STM32_PWM_USE_TIM1 && !STM32_HAS_TIM1
+#error "TIM1 not present in the selected device"
+#endif
+
+#if STM32_PWM_USE_TIM2 && !STM32_HAS_TIM2
+#error "TIM2 not present in the selected device"
+#endif
+
+#if STM32_PWM_USE_TIM3 && !STM32_HAS_TIM3
+#error "TIM3 not present in the selected device"
+#endif
+
+#if STM32_PWM_USE_TIM4 && !STM32_HAS_TIM4
+#error "TIM4 not present in the selected device"
+#endif
+
+#if STM32_PWM_USE_TIM5 && !STM32_HAS_TIM5
+#error "TIM5 not present in the selected device"
+#endif
+
+#if STM32_PWM_USE_TIM8 && !STM32_HAS_TIM8
+#error "TIM8 not present in the selected device"
+#endif
+
+#if STM32_PWM_USE_TIM9 && !STM32_HAS_TIM9
+#error "TIM9 not present in the selected device"
+#endif
+
+#if !STM32_PWM_USE_TIM1 && !STM32_PWM_USE_TIM2 && \
+ !STM32_PWM_USE_TIM3 && !STM32_PWM_USE_TIM4 && \
+ !STM32_PWM_USE_TIM5 && !STM32_PWM_USE_TIM8 && \
+ !STM32_PWM_USE_TIM9
+#error "PWM driver activated but no TIM peripheral assigned"
+#endif
+
+#if STM32_PWM_USE_ADVANCED && !STM32_PWM_USE_TIM1 && !STM32_PWM_USE_TIM8
+#error "advanced mode selected but no advanced timer assigned"
+#endif
+
+#if STM32_PWM_USE_TIM1 && \
+ !CORTEX_IS_VALID_KERNEL_PRIORITY(STM32_PWM_TIM1_IRQ_PRIORITY)
+#error "Invalid IRQ priority assigned to TIM1"
+#endif
+
+#if STM32_PWM_USE_TIM2 && \
+ !CORTEX_IS_VALID_KERNEL_PRIORITY(STM32_PWM_TIM2_IRQ_PRIORITY)
+#error "Invalid IRQ priority assigned to TIM2"
+#endif
+
+#if STM32_PWM_USE_TIM3 && \
+ !CORTEX_IS_VALID_KERNEL_PRIORITY(STM32_PWM_TIM3_IRQ_PRIORITY)
+#error "Invalid IRQ priority assigned to TIM3"
+#endif
+
+#if STM32_PWM_USE_TIM4 && \
+ !CORTEX_IS_VALID_KERNEL_PRIORITY(STM32_PWM_TIM4_IRQ_PRIORITY)
+#error "Invalid IRQ priority assigned to TIM4"
+#endif
+
+#if STM32_PWM_USE_TIM5 && \
+ !CORTEX_IS_VALID_KERNEL_PRIORITY(STM32_PWM_TIM5_IRQ_PRIORITY)
+#error "Invalid IRQ priority assigned to TIM5"
+#endif
+
+#if STM32_PWM_USE_TIM8 && \
+ !CORTEX_IS_VALID_KERNEL_PRIORITY(STM32_PWM_TIM8_IRQ_PRIORITY)
+#error "Invalid IRQ priority assigned to TIM8"
+#endif
+
+#if STM32_PWM_USE_TIM9 && \
+ !CORTEX_IS_VALID_KERNEL_PRIORITY(STM32_PWM_TIM9_IRQ_PRIORITY)
+#error "Invalid IRQ priority assigned to TIM9"
+#endif
+
+/*===========================================================================*/
+/* Driver data structures and types. */
+/*===========================================================================*/
+
+/**
+ * @brief PWM mode type.
+ */
+typedef uint32_t pwmmode_t;
+
+/**
+ * @brief PWM channel type.
+ */
+typedef uint8_t pwmchannel_t;
+
+/**
+ * @brief PWM counter type.
+ */
+typedef uint16_t pwmcnt_t;
+
+/**
+ * @brief PWM driver channel configuration structure.
+ */
+typedef struct {
+ /**
+ * @brief Channel active logic level.
+ */
+ pwmmode_t mode;
+ /**
+ * @brief Channel callback pointer.
+ * @note This callback is invoked on the channel compare event. If set to
+ * @p NULL then the callback is disabled.
+ */
+ pwmcallback_t callback;
+ /* End of the mandatory fields.*/
+} PWMChannelConfig;
+
+/**
+ * @brief PWM driver configuration structure.
+ */
+typedef struct {
+ /**
+ * @brief Timer clock in Hz.
+ * @note The low level can use assertions in order to catch invalid
+ * frequency specifications.
+ */
+ uint32_t frequency;
+ /**
+ * @brief PWM period in ticks.
+ * @note The low level can use assertions in order to catch invalid
+ * period specifications.
+ */
+ pwmcnt_t period;
+ /**
+ * @brief Periodic callback pointer.
+ * @note This callback is invoked on PWM counter reset. If set to
+ * @p NULL then the callback is disabled.
+ */
+ pwmcallback_t callback;
+ /**
+ * @brief Channels configurations.
+ */
+ PWMChannelConfig channels[PWM_CHANNELS];
+ /* End of the mandatory fields.*/
+ /**
+ * @brief TIM CR2 register initialization data.
+ * @note The value of this field should normally be equal to zero.
+ */
+ uint16_t cr2;
+#if STM32_PWM_USE_ADVANCED || defined(__DOXYGEN__)
+ /**
+ * @brief TIM BDTR (break & dead-time) register initialization data.
+ * @note The value of this field should normally be equal to zero.
+ */ \
+ uint16_t bdtr;
+#endif
+} PWMConfig;
+
+/**
+ * @brief Structure representing a PWM driver.
+ */
+struct PWMDriver {
+ /**
+ * @brief Driver state.
+ */
+ pwmstate_t state;
+ /**
+ * @brief Current driver configuration data.
+ */
+ const PWMConfig *config;
+ /**
+ * @brief Current PWM period in ticks.
+ */
+ pwmcnt_t period;
+#if defined(PWM_DRIVER_EXT_FIELDS)
+ PWM_DRIVER_EXT_FIELDS
+#endif
+ /* End of the mandatory fields.*/
+ /**
+ * @brief Timer base clock.
+ */
+ uint32_t clock;
+ /**
+ * @brief Pointer to the TIMx registers block.
+ */
+ stm32_tim_t *tim;
+};
+
+/*===========================================================================*/
+/* Driver macros. */
+/*===========================================================================*/
+
+/**
+ * @brief Changes the period the PWM peripheral.
+ * @details This function changes the period of a PWM unit that has already
+ * been activated using @p pwmStart().
+ * @pre The PWM unit must have been activated using @p pwmStart().
+ * @post The PWM unit period is changed to the new value.
+ * @note The function has effect at the next cycle start.
+ * @note If a period is specified that is shorter than the pulse width
+ * programmed in one of the channels then the behavior is not
+ * guaranteed.
+ *
+ * @param[in] pwmp pointer to a @p PWMDriver object
+ * @param[in] period new cycle time in ticks
+ *
+ * @notapi
+ */
+#define pwm_lld_change_period(pwmp, period) \
+ ((pwmp)->tim->ARR = (uint16_t)((period) - 1))
+
+/**
+ * @brief Returns a PWM channel status.
+ * @pre The PWM unit must have been activated using @p pwmStart().
+ *
+ * @param[in] pwmp pointer to a @p PWMDriver object
+ * @param[in] channel PWM channel identifier (0...PWM_CHANNELS-1)
+ *
+ * @notapi
+ */
+#define pwm_lld_is_channel_enabled(pwmp, channel) \
+ (((pwmp)->tim->CCR[channel] != 0) || \
+ (((pwmp)->tim->DIER & (2 << channel)) != 0))
+
+/*===========================================================================*/
+/* External declarations. */
+/*===========================================================================*/
+
+#if STM32_PWM_USE_TIM1 && !defined(__DOXYGEN__)
+extern PWMDriver PWMD1;
+#endif
+
+#if STM32_PWM_USE_TIM2 && !defined(__DOXYGEN__)
+extern PWMDriver PWMD2;
+#endif
+
+#if STM32_PWM_USE_TIM3 && !defined(__DOXYGEN__)
+extern PWMDriver PWMD3;
+#endif
+
+#if STM32_PWM_USE_TIM4 && !defined(__DOXYGEN__)
+extern PWMDriver PWMD4;
+#endif
+
+#if STM32_PWM_USE_TIM5 && !defined(__DOXYGEN__)
+extern PWMDriver PWMD5;
+#endif
+
+#if STM32_PWM_USE_TIM8 && !defined(__DOXYGEN__)
+extern PWMDriver PWMD8;
+#endif
+
+#if STM32_PWM_USE_TIM9 && !defined(__DOXYGEN__)
+extern PWMDriver PWMD9;
+#endif
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+ void pwm_lld_init(void);
+ void pwm_lld_start(PWMDriver *pwmp);
+ void pwm_lld_stop(PWMDriver *pwmp);
+ void pwm_lld_enable_channel(PWMDriver *pwmp,
+ pwmchannel_t channel,
+ pwmcnt_t width);
+ void pwm_lld_disable_channel(PWMDriver *pwmp, pwmchannel_t channel);
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* HAL_USE_PWM */
+
+#endif /* _PWM_LLD_H_ */
+
+/** @} */
diff --git a/os/hal/platforms/STM32/sdc_lld.c b/os/hal/platforms/STM32/sdc_lld.c new file mode 100644 index 000000000..69873d5f0 --- /dev/null +++ b/os/hal/platforms/STM32/sdc_lld.c @@ -0,0 +1,788 @@ +/*
+ ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+/**
+ * @file STM32/sdc_lld.c
+ * @brief STM32 SDC subsystem low level driver source.
+ *
+ * @addtogroup SDC
+ * @{
+ */
+
+/*
+ TODO: Try preerase blocks before writing (ACMD23).
+ */
+
+#include <string.h>
+
+#include "ch.h"
+#include "hal.h"
+
+#if HAL_USE_SDC || defined(__DOXYGEN__)
+
+/*===========================================================================*/
+/* Driver local definitions. */
+/*===========================================================================*/
+
+#define DMA_CHANNEL \
+ STM32_DMA_GETCHANNEL(STM32_SDC_SDIO_DMA_STREAM, \
+ STM32_SDC_SDIO_DMA_CHN)
+
+/*===========================================================================*/
+/* Driver exported variables. */
+/*===========================================================================*/
+
+/** @brief SDCD1 driver identifier.*/
+SDCDriver SDCD1;
+
+/*===========================================================================*/
+/* Driver local variables and types. */
+/*===========================================================================*/
+
+#if STM32_SDC_SDIO_UNALIGNED_SUPPORT
+/**
+ * @brief Buffer for temporary storage during unaligned transfers.
+ */
+static union {
+ uint32_t alignment;
+ uint8_t buf[MMCSD_BLOCK_SIZE];
+} u;
+#endif /* STM32_SDC_SDIO_UNALIGNED_SUPPORT */
+
+/*===========================================================================*/
+/* Driver local functions. */
+/*===========================================================================*/
+
+/**
+ * @brief Prepares card to handle read transaction.
+ *
+ * @param[in] sdcp pointer to the @p SDCDriver object
+ * @param[in] startblk first block to read
+ * @param[in] n number of blocks to read
+ * @param[in] resp pointer to the response buffer
+ *
+ * @return The operation status.
+ * @retval CH_SUCCESS operation succeeded.
+ * @retval CH_FAILED operation failed.
+ *
+ * @notapi
+ */
+static bool_t sdc_lld_prepare_read(SDCDriver *sdcp, uint32_t startblk,
+ uint32_t n, uint32_t *resp) {
+
+ /* Driver handles data in 512 bytes blocks (just like HC cards). But if we
+ have not HC card than we must convert address from blocks to bytes.*/
+ if (!(sdcp->cardmode & SDC_MODE_HIGH_CAPACITY))
+ startblk *= MMCSD_BLOCK_SIZE;
+
+ if (n > 1) {
+ /* Send read multiple blocks command to card.*/
+ if (sdc_lld_send_cmd_short_crc(sdcp, MMCSD_CMD_READ_MULTIPLE_BLOCK,
+ startblk, resp) || MMCSD_R1_ERROR(resp[0]))
+ return CH_FAILED;
+ }
+ else{
+ /* Send read single block command.*/
+ if (sdc_lld_send_cmd_short_crc(sdcp, MMCSD_CMD_READ_SINGLE_BLOCK,
+ startblk, resp) || MMCSD_R1_ERROR(resp[0]))
+ return CH_FAILED;
+ }
+
+ return CH_SUCCESS;
+}
+
+/**
+ * @brief Prepares card to handle write transaction.
+ *
+ * @param[in] sdcp pointer to the @p SDCDriver object
+ * @param[in] startblk first block to read
+ * @param[in] n number of blocks to write
+ * @param[in] resp pointer to the response buffer
+ *
+ * @return The operation status.
+ * @retval CH_SUCCESS operation succeeded.
+ * @retval CH_FAILED operation failed.
+ *
+ * @notapi
+ */
+static bool_t sdc_lld_prepare_write(SDCDriver *sdcp, uint32_t startblk,
+ uint32_t n, uint32_t *resp) {
+
+ /* Driver handles data in 512 bytes blocks (just like HC cards). But if we
+ have not HC card than we must convert address from blocks to bytes.*/
+ if (!(sdcp->cardmode & SDC_MODE_HIGH_CAPACITY))
+ startblk *= MMCSD_BLOCK_SIZE;
+
+ if (n > 1) {
+ /* Write multiple blocks command.*/
+ if (sdc_lld_send_cmd_short_crc(sdcp, MMCSD_CMD_WRITE_MULTIPLE_BLOCK,
+ startblk, resp) || MMCSD_R1_ERROR(resp[0]))
+ return CH_FAILED;
+ }
+ else{
+ /* Write single block command.*/
+ if (sdc_lld_send_cmd_short_crc(sdcp, MMCSD_CMD_WRITE_BLOCK,
+ startblk, resp) || MMCSD_R1_ERROR(resp[0]))
+ return CH_FAILED;
+ }
+
+ return CH_SUCCESS;
+}
+
+/**
+ * @brief Wait end of data transaction and performs finalizations.
+ *
+ * @param[in] sdcp pointer to the @p SDCDriver object
+ * @param[in] n number of blocks in transaction
+ * @param[in] resp pointer to the response buffer
+ *
+ * @return The operation status.
+ * @retval CH_SUCCESS operation succeeded.
+ * @retval CH_FAILED operation failed.
+ */
+static bool_t sdc_lld_wait_transaction_end(SDCDriver *sdcp, uint32_t n,
+ uint32_t *resp) {
+
+ /* Note the mask is checked before going to sleep because the interrupt
+ may have occurred before reaching the critical zone.*/
+ chSysLock();
+ if (SDIO->MASK != 0) {
+ chDbgAssert(sdcp->thread == NULL,
+ "sdc_lld_start_data_transaction(), #1", "not NULL");
+ sdcp->thread = chThdSelf();
+ chSchGoSleepS(THD_STATE_SUSPENDED);
+ chDbgAssert(sdcp->thread == NULL,
+ "sdc_lld_start_data_transaction(), #2", "not NULL");
+ }
+ if ((SDIO->STA & SDIO_STA_DATAEND) == 0) {
+ chSysUnlock();
+ return CH_FAILED;
+ }
+
+#if (defined(STM32F4XX) || defined(STM32F2XX))
+ /* Wait until DMA channel enabled to be sure that all data transferred.*/
+ while (sdcp->dma->stream->CR & STM32_DMA_CR_EN)
+ ;
+
+ /* DMA event flags must be manually cleared.*/
+ dmaStreamClearInterrupt(sdcp->dma);
+
+ SDIO->ICR = STM32_SDIO_ICR_ALL_FLAGS;
+ SDIO->DCTRL = 0;
+ chSysUnlock();
+
+ /* Wait until interrupt flags to be cleared.*/
+ /*while (((DMA2->LISR) >> (sdcp->dma->ishift)) & STM32_DMA_ISR_TCIF)
+ dmaStreamClearInterrupt(sdcp->dma);*/
+#else
+ /* Waits for transfer completion at DMA level, the the stream is
+ disabled and cleared.*/
+ dmaWaitCompletion(sdcp->dma);
+
+ SDIO->ICR = STM32_SDIO_ICR_ALL_FLAGS;
+ SDIO->DCTRL = 0;
+ chSysUnlock();
+#endif
+
+ /* Finalize transaction.*/
+ if (n > 1)
+ return sdc_lld_send_cmd_short_crc(sdcp, MMCSD_CMD_STOP_TRANSMISSION, 0, resp);
+
+ return CH_SUCCESS;
+}
+
+/**
+ * @brief Gets SDC errors.
+ *
+ * @param[in] sdcp pointer to the @p SDCDriver object
+ * @param[in] sta value of the STA register
+ *
+ * @notapi
+ */
+static void sdc_lld_collect_errors(SDCDriver *sdcp, uint32_t sta) {
+ uint32_t errors = SDC_NO_ERROR;
+
+ if (sta & SDIO_STA_CCRCFAIL)
+ errors |= SDC_CMD_CRC_ERROR;
+ if (sta & SDIO_STA_DCRCFAIL)
+ errors |= SDC_DATA_CRC_ERROR;
+ if (sta & SDIO_STA_CTIMEOUT)
+ errors |= SDC_COMMAND_TIMEOUT;
+ if (sta & SDIO_STA_DTIMEOUT)
+ errors |= SDC_DATA_TIMEOUT;
+ if (sta & SDIO_STA_TXUNDERR)
+ errors |= SDC_TX_UNDERRUN;
+ if (sta & SDIO_STA_RXOVERR)
+ errors |= SDC_RX_OVERRUN;
+ if (sta & SDIO_STA_STBITERR)
+ errors |= SDC_STARTBIT_ERROR;
+
+ sdcp->errors |= errors;
+}
+
+/**
+ * @brief Performs clean transaction stopping in case of errors.
+ *
+ * @param[in] sdcp pointer to the @p SDCDriver object
+ * @param[in] n number of blocks in transaction
+ * @param[in] resp pointer to the response buffer
+ *
+ * @notapi
+ */
+static void sdc_lld_error_cleanup(SDCDriver *sdcp,
+ uint32_t n,
+ uint32_t *resp) {
+ uint32_t sta = SDIO->STA;
+
+ dmaStreamClearInterrupt(sdcp->dma);
+ dmaStreamDisable(sdcp->dma);
+ SDIO->ICR = STM32_SDIO_ICR_ALL_FLAGS;
+ SDIO->MASK = 0;
+ SDIO->DCTRL = 0;
+ sdc_lld_collect_errors(sdcp, sta);
+ if (n > 1)
+ sdc_lld_send_cmd_short_crc(sdcp, MMCSD_CMD_STOP_TRANSMISSION, 0, resp);
+}
+
+/*===========================================================================*/
+/* Driver interrupt handlers. */
+/*===========================================================================*/
+
+#if !defined(STM32_SDIO_HANDLER)
+#error "STM32_SDIO_HANDLER not defined"
+#endif
+/**
+ * @brief SDIO IRQ handler.
+ * @details It just wakes transaction thread. All error handling performs in
+ * that thread.
+ *
+ * @isr
+ */
+CH_IRQ_HANDLER(STM32_SDIO_HANDLER) {
+
+ CH_IRQ_PROLOGUE();
+
+ chSysLockFromIsr()
+
+ /* Disables the source but the status flags are not reset because the
+ read/write functions needs to check them.*/
+ SDIO->MASK = 0;
+
+ if (SDCD1.thread != NULL) {
+ chSchReadyI(SDCD1.thread);
+ SDCD1.thread = NULL;
+ }
+
+ chSysUnlockFromIsr();
+
+ CH_IRQ_EPILOGUE();
+}
+
+/*===========================================================================*/
+/* Driver exported functions. */
+/*===========================================================================*/
+
+/**
+ * @brief Low level SDC driver initialization.
+ *
+ * @notapi
+ */
+void sdc_lld_init(void) {
+
+ sdcObjectInit(&SDCD1);
+ SDCD1.thread = NULL;
+ SDCD1.dma = STM32_DMA_STREAM(STM32_SDC_SDIO_DMA_STREAM);
+#if CH_DBG_ENABLE_ASSERTS
+ SDCD1.sdio = SDIO;
+#endif
+}
+
+/**
+ * @brief Configures and activates the SDC peripheral.
+ *
+ * @param[in] sdcp pointer to the @p SDCDriver object
+ *
+ * @notapi
+ */
+void sdc_lld_start(SDCDriver *sdcp) {
+
+ sdcp->dmamode = STM32_DMA_CR_CHSEL(DMA_CHANNEL) |
+ STM32_DMA_CR_PL(STM32_SDC_SDIO_DMA_PRIORITY) |
+ STM32_DMA_CR_PSIZE_WORD |
+ STM32_DMA_CR_MSIZE_WORD |
+ STM32_DMA_CR_MINC;
+
+#if (defined(STM32F4XX) || defined(STM32F2XX))
+ sdcp->dmamode |= STM32_DMA_CR_PFCTRL |
+ STM32_DMA_CR_PBURST_INCR4 |
+ STM32_DMA_CR_MBURST_INCR4;
+#endif
+
+ if (sdcp->state == BLK_STOP) {
+ /* Note, the DMA must be enabled before the IRQs.*/
+ bool_t b;
+ b = dmaStreamAllocate(sdcp->dma, STM32_SDC_SDIO_IRQ_PRIORITY, NULL, NULL);
+ chDbgAssert(!b, "sdc_lld_start(), #1", "stream already allocated");
+ dmaStreamSetPeripheral(sdcp->dma, &SDIO->FIFO);
+#if (defined(STM32F4XX) || defined(STM32F2XX))
+ dmaStreamSetFIFO(sdcp->dma, STM32_DMA_FCR_DMDIS | STM32_DMA_FCR_FTH_FULL);
+#endif
+ nvicEnableVector(STM32_SDIO_NUMBER,
+ CORTEX_PRIORITY_MASK(STM32_SDC_SDIO_IRQ_PRIORITY));
+ rccEnableSDIO(FALSE);
+ }
+
+ /* Configuration, card clock is initially stopped.*/
+ SDIO->POWER = 0;
+ SDIO->CLKCR = 0;
+ SDIO->DCTRL = 0;
+ SDIO->DTIMER = 0;
+}
+
+/**
+ * @brief Deactivates the SDC peripheral.
+ *
+ * @param[in] sdcp pointer to the @p SDCDriver object
+ *
+ * @notapi
+ */
+void sdc_lld_stop(SDCDriver *sdcp) {
+
+ if (sdcp->state != BLK_STOP) {
+
+ /* SDIO deactivation.*/
+ SDIO->POWER = 0;
+ SDIO->CLKCR = 0;
+ SDIO->DCTRL = 0;
+ SDIO->DTIMER = 0;
+
+ /* Clock deactivation.*/
+ nvicDisableVector(STM32_SDIO_NUMBER);
+ dmaStreamRelease(sdcp->dma);
+ rccDisableSDIO(FALSE);
+ }
+}
+
+/**
+ * @brief Starts the SDIO clock and sets it to init mode (400kHz or less).
+ *
+ * @param[in] sdcp pointer to the @p SDCDriver object
+ *
+ * @notapi
+ */
+void sdc_lld_start_clk(SDCDriver *sdcp) {
+
+ (void)sdcp;
+
+ /* Initial clock setting: 400kHz, 1bit mode.*/
+ SDIO->CLKCR = STM32_SDIO_DIV_LS;
+ SDIO->POWER |= SDIO_POWER_PWRCTRL_0 | SDIO_POWER_PWRCTRL_1;
+ SDIO->CLKCR |= SDIO_CLKCR_CLKEN;
+}
+
+/**
+ * @brief Sets the SDIO clock to data mode (25MHz or less).
+ *
+ * @param[in] sdcp pointer to the @p SDCDriver object
+ *
+ * @notapi
+ */
+void sdc_lld_set_data_clk(SDCDriver *sdcp) {
+
+ (void)sdcp;
+
+ SDIO->CLKCR = (SDIO->CLKCR & 0xFFFFFF00) | STM32_SDIO_DIV_HS;
+}
+
+/**
+ * @brief Stops the SDIO clock.
+ *
+ * @param[in] sdcp pointer to the @p SDCDriver object
+ *
+ * @notapi
+ */
+void sdc_lld_stop_clk(SDCDriver *sdcp) {
+
+ (void)sdcp;
+
+ SDIO->CLKCR = 0;
+ SDIO->POWER = 0;
+}
+
+/**
+ * @brief Switches the bus to 4 bits mode.
+ *
+ * @param[in] sdcp pointer to the @p SDCDriver object
+ * @param[in] mode bus mode
+ *
+ * @notapi
+ */
+void sdc_lld_set_bus_mode(SDCDriver *sdcp, sdcbusmode_t mode) {
+ uint32_t clk = SDIO->CLKCR & ~SDIO_CLKCR_WIDBUS;
+
+ (void)sdcp;
+
+ switch (mode) {
+ case SDC_MODE_1BIT:
+ SDIO->CLKCR = clk;
+ break;
+ case SDC_MODE_4BIT:
+ SDIO->CLKCR = clk | SDIO_CLKCR_WIDBUS_0;
+ break;
+ case SDC_MODE_8BIT:
+ SDIO->CLKCR = clk | SDIO_CLKCR_WIDBUS_1;
+ break;
+ }
+}
+
+/**
+ * @brief Sends an SDIO command with no response expected.
+ *
+ * @param[in] sdcp pointer to the @p SDCDriver object
+ * @param[in] cmd card command
+ * @param[in] arg command argument
+ *
+ * @notapi
+ */
+void sdc_lld_send_cmd_none(SDCDriver *sdcp, uint8_t cmd, uint32_t arg) {
+
+ (void)sdcp;
+
+ SDIO->ARG = arg;
+ SDIO->CMD = (uint32_t)cmd | SDIO_CMD_CPSMEN;
+ while ((SDIO->STA & SDIO_STA_CMDSENT) == 0)
+ ;
+ SDIO->ICR = SDIO_ICR_CMDSENTC;
+}
+
+/**
+ * @brief Sends an SDIO command with a short response expected.
+ * @note The CRC is not verified.
+ *
+ * @param[in] sdcp pointer to the @p SDCDriver object
+ * @param[in] cmd card command
+ * @param[in] arg command argument
+ * @param[out] resp pointer to the response buffer (one word)
+ *
+ * @return The operation status.
+ * @retval CH_SUCCESS operation succeeded.
+ * @retval CH_FAILED operation failed.
+ *
+ * @notapi
+ */
+bool_t sdc_lld_send_cmd_short(SDCDriver *sdcp, uint8_t cmd, uint32_t arg,
+ uint32_t *resp) {
+ uint32_t sta;
+
+ (void)sdcp;
+
+ SDIO->ARG = arg;
+ SDIO->CMD = (uint32_t)cmd | SDIO_CMD_WAITRESP_0 | SDIO_CMD_CPSMEN;
+ while (((sta = SDIO->STA) & (SDIO_STA_CMDREND | SDIO_STA_CTIMEOUT |
+ SDIO_STA_CCRCFAIL)) == 0)
+ ;
+ SDIO->ICR = sta;
+ if ((sta & (SDIO_STA_CTIMEOUT)) != 0) {
+ sdc_lld_collect_errors(sdcp, sta);
+ return CH_FAILED;
+ }
+ *resp = SDIO->RESP1;
+ return CH_SUCCESS;
+}
+
+/**
+ * @brief Sends an SDIO command with a short response expected and CRC.
+ *
+ * @param[in] sdcp pointer to the @p SDCDriver object
+ * @param[in] cmd card command
+ * @param[in] arg command argument
+ * @param[out] resp pointer to the response buffer (one word)
+ *
+ * @return The operation status.
+ * @retval CH_SUCCESS operation succeeded.
+ * @retval CH_FAILED operation failed.
+ *
+ * @notapi
+ */
+bool_t sdc_lld_send_cmd_short_crc(SDCDriver *sdcp, uint8_t cmd, uint32_t arg,
+ uint32_t *resp) {
+ uint32_t sta;
+
+ (void)sdcp;
+
+ SDIO->ARG = arg;
+ SDIO->CMD = (uint32_t)cmd | SDIO_CMD_WAITRESP_0 | SDIO_CMD_CPSMEN;
+ while (((sta = SDIO->STA) & (SDIO_STA_CMDREND | SDIO_STA_CTIMEOUT |
+ SDIO_STA_CCRCFAIL)) == 0)
+ ;
+ SDIO->ICR = sta;
+ if ((sta & (SDIO_STA_CTIMEOUT | SDIO_STA_CCRCFAIL)) != 0) {
+ sdc_lld_collect_errors(sdcp, sta);
+ return CH_FAILED;
+ }
+ *resp = SDIO->RESP1;
+ return CH_SUCCESS;
+}
+
+/**
+ * @brief Sends an SDIO command with a long response expected and CRC.
+ *
+ * @param[in] sdcp pointer to the @p SDCDriver object
+ * @param[in] cmd card command
+ * @param[in] arg command argument
+ * @param[out] resp pointer to the response buffer (four words)
+ *
+ * @return The operation status.
+ * @retval CH_SUCCESS operation succeeded.
+ * @retval CH_FAILED operation failed.
+ *
+ * @notapi
+ */
+bool_t sdc_lld_send_cmd_long_crc(SDCDriver *sdcp, uint8_t cmd, uint32_t arg,
+ uint32_t *resp) {
+ uint32_t sta;
+
+ (void)sdcp;
+
+ SDIO->ARG = arg;
+ SDIO->CMD = (uint32_t)cmd | SDIO_CMD_WAITRESP_0 | SDIO_CMD_WAITRESP_1 |
+ SDIO_CMD_CPSMEN;
+ while (((sta = SDIO->STA) & (SDIO_STA_CMDREND | SDIO_STA_CTIMEOUT |
+ SDIO_STA_CCRCFAIL)) == 0)
+ ;
+ SDIO->ICR = sta;
+ if ((sta & (STM32_SDIO_STA_ERROR_MASK)) != 0) {
+ sdc_lld_collect_errors(sdcp, sta);
+ return CH_FAILED;
+ }
+ /* Save bytes in reverse order because MSB in response comes first.*/
+ *resp++ = SDIO->RESP4;
+ *resp++ = SDIO->RESP3;
+ *resp++ = SDIO->RESP2;
+ *resp = SDIO->RESP1;
+ return CH_SUCCESS;
+}
+
+/**
+ * @brief Reads one or more blocks.
+ *
+ * @param[in] sdcp pointer to the @p SDCDriver object
+ * @param[in] startblk first block to read
+ * @param[out] buf pointer to the read buffer
+ * @param[in] n number of blocks to read
+ *
+ * @return The operation status.
+ * @retval CH_SUCCESS operation succeeded.
+ * @retval CH_FAILED operation failed.
+ *
+ * @notapi
+ */
+bool_t sdc_lld_read_aligned(SDCDriver *sdcp, uint32_t startblk,
+ uint8_t *buf, uint32_t n) {
+ uint32_t resp[1];
+
+ chDbgCheck((n < (0x1000000 / MMCSD_BLOCK_SIZE)), "max transaction size");
+
+ SDIO->DTIMER = STM32_SDC_READ_TIMEOUT;
+
+ /* Checks for errors and waits for the card to be ready for reading.*/
+ if (_sdc_wait_for_transfer_state(sdcp))
+ return CH_FAILED;
+
+ /* Prepares the DMA channel for writing.*/
+ dmaStreamSetMemory0(sdcp->dma, buf);
+ dmaStreamSetTransactionSize(sdcp->dma,
+ (n * MMCSD_BLOCK_SIZE) / sizeof (uint32_t));
+ dmaStreamSetMode(sdcp->dma, sdcp->dmamode | STM32_DMA_CR_DIR_P2M);
+ dmaStreamEnable(sdcp->dma);
+
+ /* Setting up data transfer.*/
+ SDIO->ICR = STM32_SDIO_ICR_ALL_FLAGS;
+ SDIO->MASK = SDIO_MASK_DCRCFAILIE |
+ SDIO_MASK_DTIMEOUTIE |
+ SDIO_MASK_STBITERRIE |
+ SDIO_MASK_RXOVERRIE |
+ SDIO_MASK_DATAENDIE;
+ SDIO->DLEN = n * MMCSD_BLOCK_SIZE;
+
+ /* Talk to card what we want from it.*/
+ if (sdc_lld_prepare_read(sdcp, startblk, n, resp) == TRUE)
+ goto error;
+
+ /* Transaction starts just after DTEN bit setting.*/
+ SDIO->DCTRL = SDIO_DCTRL_DTDIR |
+ SDIO_DCTRL_DBLOCKSIZE_3 |
+ SDIO_DCTRL_DBLOCKSIZE_0 |
+ SDIO_DCTRL_DMAEN |
+ SDIO_DCTRL_DTEN;
+ if (sdc_lld_wait_transaction_end(sdcp, n, resp) == TRUE)
+ goto error;
+
+ return CH_SUCCESS;
+
+error:
+ sdc_lld_error_cleanup(sdcp, n, resp);
+ return CH_FAILED;
+}
+
+/**
+ * @brief Writes one or more blocks.
+ *
+ * @param[in] sdcp pointer to the @p SDCDriver object
+ * @param[in] startblk first block to write
+ * @param[out] buf pointer to the write buffer
+ * @param[in] n number of blocks to write
+ *
+ * @return The operation status.
+ * @retval CH_SUCCESS operation succeeded.
+ * @retval CH_FAILED operation failed.
+ *
+ * @notapi
+ */
+bool_t sdc_lld_write_aligned(SDCDriver *sdcp, uint32_t startblk,
+ const uint8_t *buf, uint32_t n) {
+ uint32_t resp[1];
+
+ chDbgCheck((n < (0x1000000 / MMCSD_BLOCK_SIZE)), "max transaction size");
+
+ SDIO->DTIMER = STM32_SDC_WRITE_TIMEOUT;
+
+ /* Checks for errors and waits for the card to be ready for writing.*/
+ if (_sdc_wait_for_transfer_state(sdcp))
+ return CH_FAILED;
+
+ /* Prepares the DMA channel for writing.*/
+ dmaStreamSetMemory0(sdcp->dma, buf);
+ dmaStreamSetTransactionSize(sdcp->dma,
+ (n * MMCSD_BLOCK_SIZE) / sizeof (uint32_t));
+ dmaStreamSetMode(sdcp->dma, sdcp->dmamode | STM32_DMA_CR_DIR_M2P);
+ dmaStreamEnable(sdcp->dma);
+
+ /* Setting up data transfer.*/
+ SDIO->ICR = STM32_SDIO_ICR_ALL_FLAGS;
+ SDIO->MASK = SDIO_MASK_DCRCFAILIE |
+ SDIO_MASK_DTIMEOUTIE |
+ SDIO_MASK_STBITERRIE |
+ SDIO_MASK_TXUNDERRIE |
+ SDIO_MASK_DATAENDIE;
+ SDIO->DLEN = n * MMCSD_BLOCK_SIZE;
+
+ /* Talk to card what we want from it.*/
+ if (sdc_lld_prepare_write(sdcp, startblk, n, resp) == TRUE)
+ goto error;
+
+ /* Transaction starts just after DTEN bit setting.*/
+ SDIO->DCTRL = SDIO_DCTRL_DBLOCKSIZE_3 |
+ SDIO_DCTRL_DBLOCKSIZE_0 |
+ SDIO_DCTRL_DMAEN |
+ SDIO_DCTRL_DTEN;
+ if (sdc_lld_wait_transaction_end(sdcp, n, resp) == TRUE)
+ goto error;
+
+ return CH_SUCCESS;
+
+error:
+ sdc_lld_error_cleanup(sdcp, n, resp);
+ return CH_FAILED;
+}
+
+/**
+ * @brief Reads one or more blocks.
+ *
+ * @param[in] sdcp pointer to the @p SDCDriver object
+ * @param[in] startblk first block to read
+ * @param[out] buf pointer to the read buffer
+ * @param[in] n number of blocks to read
+ *
+ * @return The operation status.
+ * @retval CH_SUCCESS operation succeeded.
+ * @retval CH_FAILED operation failed.
+ *
+ * @notapi
+ */
+bool_t sdc_lld_read(SDCDriver *sdcp, uint32_t startblk,
+ uint8_t *buf, uint32_t n) {
+
+#if STM32_SDC_SDIO_UNALIGNED_SUPPORT
+ if (((unsigned)buf & 3) != 0) {
+ uint32_t i;
+ for (i = 0; i < n; i++) {
+ if (sdc_lld_read_aligned(sdcp, startblk, u.buf, 1))
+ return CH_FAILED;
+ memcpy(buf, u.buf, MMCSD_BLOCK_SIZE);
+ buf += MMCSD_BLOCK_SIZE;
+ startblk++;
+ }
+ return CH_SUCCESS;
+ }
+#endif /* STM32_SDC_SDIO_UNALIGNED_SUPPORT */
+ return sdc_lld_read_aligned(sdcp, startblk, buf, n);
+}
+
+/**
+ * @brief Writes one or more blocks.
+ *
+ * @param[in] sdcp pointer to the @p SDCDriver object
+ * @param[in] startblk first block to write
+ * @param[out] buf pointer to the write buffer
+ * @param[in] n number of blocks to write
+ *
+ * @return The operation status.
+ * @retval CH_SUCCESS operation succeeded.
+ * @retval CH_FAILED operation failed.
+ *
+ * @notapi
+ */
+bool_t sdc_lld_write(SDCDriver *sdcp, uint32_t startblk,
+ const uint8_t *buf, uint32_t n) {
+
+#if STM32_SDC_SDIO_UNALIGNED_SUPPORT
+ if (((unsigned)buf & 3) != 0) {
+ uint32_t i;
+ for (i = 0; i < n; i++) {
+ memcpy(u.buf, buf, MMCSD_BLOCK_SIZE);
+ buf += MMCSD_BLOCK_SIZE;
+ if (sdc_lld_write_aligned(sdcp, startblk, u.buf, 1))
+ return CH_FAILED;
+ startblk++;
+ }
+ return CH_SUCCESS;
+ }
+#endif /* STM32_SDC_SDIO_UNALIGNED_SUPPORT */
+ return sdc_lld_write_aligned(sdcp, startblk, buf, n);
+}
+
+/**
+ * @brief Waits for card idle condition.
+ *
+ * @param[in] sdcp pointer to the @p SDCDriver object
+ *
+ * @return The operation status.
+ * @retval CH_SUCCESS the operation succeeded.
+ * @retval CH_FAILED the operation failed.
+ *
+ * @api
+ */
+bool_t sdc_lld_sync(SDCDriver *sdcp) {
+
+ /* TODO: Implement.*/
+ (void)sdcp;
+ return CH_SUCCESS;
+}
+
+#endif /* HAL_USE_SDC */
+
+/** @} */
diff --git a/os/hal/platforms/STM32/sdc_lld.h b/os/hal/platforms/STM32/sdc_lld.h new file mode 100644 index 000000000..8b01ba915 --- /dev/null +++ b/os/hal/platforms/STM32/sdc_lld.h @@ -0,0 +1,310 @@ +/*
+ ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+/**
+ * @file STM32/sdc_lld.h
+ * @brief STM32 SDC subsystem low level driver header.
+ *
+ * @addtogroup SDC
+ * @{
+ */
+
+#ifndef _SDC_LLD_H_
+#define _SDC_LLD_H_
+
+#if HAL_USE_SDC || defined(__DOXYGEN__)
+
+/*===========================================================================*/
+/* Driver constants. */
+/*===========================================================================*/
+
+/**
+ * @brief Value to clear all interrupts flag at once.
+ */
+#define STM32_SDIO_ICR_ALL_FLAGS (SDIO_ICR_CCRCFAILC | SDIO_ICR_DCRCFAILC | \
+ SDIO_ICR_CTIMEOUTC | SDIO_ICR_DTIMEOUTC | \
+ SDIO_ICR_TXUNDERRC | SDIO_ICR_RXOVERRC | \
+ SDIO_ICR_CMDRENDC | SDIO_ICR_CMDSENTC | \
+ SDIO_ICR_DATAENDC | SDIO_ICR_STBITERRC | \
+ SDIO_ICR_DBCKENDC | SDIO_ICR_SDIOITC | \
+ SDIO_ICR_CEATAENDC)
+
+/**
+ * @brief Mask of error flags in STA register.
+ */
+#define STM32_SDIO_STA_ERROR_MASK (SDIO_STA_CCRCFAIL | SDIO_STA_DCRCFAIL | \
+ SDIO_STA_CTIMEOUT | SDIO_STA_DTIMEOUT | \
+ SDIO_STA_TXUNDERR | SDIO_STA_RXOVERR)
+
+/*===========================================================================*/
+/* Driver pre-compile time settings. */
+/*===========================================================================*/
+
+/**
+ * @name Configuration options
+ * @{
+ */
+/**
+ * @brief SDIO DMA priority (0..3|lowest..highest).
+ */
+#if !defined(STM32_SDC_SDIO_DMA_PRIORITY) || defined(__DOXYGEN__)
+#define STM32_SDC_SDIO_DMA_PRIORITY 3
+#endif
+
+/**
+ * @brief SDIO interrupt priority level setting.
+ */
+#if !defined(STM32_SDC_SDIO_IRQ_PRIORITY) || defined(__DOXYGEN__)
+#define STM32_SDC_SDIO_IRQ_PRIORITY 9
+#endif
+
+/**
+ * @brief Write timeout in milliseconds.
+ */
+#if !defined(SDC_WRITE_TIMEOUT_MS) || defined(__DOXYGEN__)
+#define SDC_WRITE_TIMEOUT_MS 250
+#endif
+
+/**
+ * @brief Read timeout in milliseconds.
+ */
+#if !defined(SDC_READ_TIMEOUT_MS) || defined(__DOXYGEN__)
+#define SDC_READ_TIMEOUT_MS 5
+#endif
+
+/**
+ * @brief Support for unaligned transfers.
+ * @note Unaligned transfers are much slower.
+ */
+#if !defined(STM32_SDC_SDIO_UNALIGNED_SUPPORT) || defined(__DOXYGEN__)
+#define STM32_SDC_SDIO_UNALIGNED_SUPPORT TRUE
+#endif
+
+#if STM32_ADVANCED_DMA || defined(__DOXYGEN__)
+
+/**
+ * @brief DMA stream used for SDC operations.
+ * @note This option is only available on platforms with enhanced DMA.
+ */
+#if !defined(STM32_SDC_SDIO_DMA_STREAM) || defined(__DOXYGEN__)
+#define STM32_SDC_SDIO_DMA_STREAM STM32_DMA_STREAM_ID(2, 3)
+#endif
+
+#else /* !STM32_ADVANCED_DMA*/
+#define STM32_SDC_SDIO_DMA_STREAM STM32_DMA_STREAM_ID(2, 4)
+
+#endif /* !STM32_ADVANCED_DMA*/
+/** @} */
+
+/*===========================================================================*/
+/* Derived constants and error checks. */
+/*===========================================================================*/
+
+#if !STM32_HAS_SDIO
+#error "SDIO not present in the selected device"
+#endif
+
+#if !CORTEX_IS_VALID_KERNEL_PRIORITY(STM32_SDC_SDIO_IRQ_PRIORITY)
+#error "Invalid IRQ priority assigned to SDIO"
+#endif
+
+#if !STM32_DMA_IS_VALID_PRIORITY(STM32_SDC_SDIO_DMA_PRIORITY)
+#error "Invalid DMA priority assigned to SDIO"
+#endif
+
+#if !defined(STM32_DMA_REQUIRED)
+#define STM32_DMA_REQUIRED
+#endif
+
+/*
+ * SDIO clock divider.
+ */
+#if (defined(STM32F4XX) || defined(STM32F2XX))
+#define STM32_SDIO_DIV_HS 0
+#define STM32_SDIO_DIV_LS 120
+
+#elif STM32_HCLK > 48000000
+#define STM32_SDIO_DIV_HS 1
+#define STM32_SDIO_DIV_LS 178
+#else
+
+#define STM32_SDIO_DIV_HS 0
+#define STM32_SDIO_DIV_LS 118
+#endif
+
+/**
+ * @brief SDIO data timeouts in SDIO clock cycles.
+ */
+#if (defined(STM32F4XX) || defined(STM32F2XX))
+#if !STM32_CLOCK48_REQUIRED
+#error "SDIO requires STM32_CLOCK48_REQUIRED to be enabled"
+#endif
+
+#define STM32_SDC_WRITE_TIMEOUT \
+ (((STM32_PLL48CLK / (STM32_SDIO_DIV_HS + 2)) / 1000) * SDC_WRITE_TIMEOUT_MS)
+#define STM32_SDC_READ_TIMEOUT \
+ (((STM32_PLL48CLK / (STM32_SDIO_DIV_HS + 2)) / 1000) * SDC_READ_TIMEOUT_MS)
+
+#else
+#define STM32_SDC_WRITE_TIMEOUT \
+ (((STM32_HCLK / (STM32_SDIO_DIV_HS + 2)) / 1000) * SDC_WRITE_TIMEOUT_MS)
+#define STM32_SDC_READ_TIMEOUT \
+ (((STM32_HCLK / (STM32_SDIO_DIV_HS + 2)) / 1000) * SDC_READ_TIMEOUT_MS)
+#endif
+
+/*===========================================================================*/
+/* Driver data structures and types. */
+/*===========================================================================*/
+
+/**
+ * @brief Type of SDIO bus mode.
+ */
+typedef enum {
+ SDC_MODE_1BIT = 0,
+ SDC_MODE_4BIT,
+ SDC_MODE_8BIT
+} sdcbusmode_t;
+
+/**
+ * @brief Type of card flags.
+ */
+typedef uint32_t sdcmode_t;
+
+/**
+ * @brief SDC Driver condition flags type.
+ */
+typedef uint32_t sdcflags_t;
+
+/**
+ * @brief Type of a structure representing an SDC driver.
+ */
+typedef struct SDCDriver SDCDriver;
+
+/**
+ * @brief Driver configuration structure.
+ * @note It could be empty on some architectures.
+ */
+typedef struct {
+ uint32_t dummy;
+} SDCConfig;
+
+/**
+ * @brief @p SDCDriver specific methods.
+ */
+#define _sdc_driver_methods \
+ _mmcsd_block_device_methods
+
+/**
+ * @extends MMCSDBlockDeviceVMT
+ *
+ * @brief @p SDCDriver virtual methods table.
+ */
+struct SDCDriverVMT {
+ _sdc_driver_methods
+};
+
+/**
+ * @brief Structure representing an SDC driver.
+ */
+struct SDCDriver {
+ /**
+ * @brief Virtual Methods Table.
+ */
+ const struct SDCDriverVMT *vmt;
+ _mmcsd_block_device_data
+ /**
+ * @brief Current configuration data.
+ */
+ const SDCConfig *config;
+ /**
+ * @brief Various flags regarding the mounted card.
+ */
+ sdcmode_t cardmode;
+ /**
+ * @brief Errors flags.
+ */
+ sdcflags_t errors;
+ /**
+ * @brief Card RCA.
+ */
+ uint32_t rca;
+ /* End of the mandatory fields.*/
+ /**
+ * @brief Thread waiting for I/O completion IRQ.
+ */
+ Thread *thread;
+ /**
+ * @brief DMA mode bit mask.
+ */
+ uint32_t dmamode;
+ /**
+ * @brief Transmit DMA channel.
+ */
+ const stm32_dma_stream_t *dma;
+ /**
+ * @brief Pointer to the SDIO registers block.
+ * @note Used only for dubugging purpose.
+ */
+#if CH_DBG_ENABLE_ASSERTS
+ SDIO_TypeDef *sdio;
+#endif
+};
+
+/*===========================================================================*/
+/* Driver macros. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* External declarations. */
+/*===========================================================================*/
+
+#if !defined(__DOXYGEN__)
+extern SDCDriver SDCD1;
+#endif
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+ void sdc_lld_init(void);
+ void sdc_lld_start(SDCDriver *sdcp);
+ void sdc_lld_stop(SDCDriver *sdcp);
+ void sdc_lld_start_clk(SDCDriver *sdcp);
+ void sdc_lld_set_data_clk(SDCDriver *sdcp);
+ void sdc_lld_stop_clk(SDCDriver *sdcp);
+ void sdc_lld_set_bus_mode(SDCDriver *sdcp, sdcbusmode_t mode);
+ void sdc_lld_send_cmd_none(SDCDriver *sdcp, uint8_t cmd, uint32_t arg);
+ bool_t sdc_lld_send_cmd_short(SDCDriver *sdcp, uint8_t cmd, uint32_t arg,
+ uint32_t *resp);
+ bool_t sdc_lld_send_cmd_short_crc(SDCDriver *sdcp, uint8_t cmd, uint32_t arg,
+ uint32_t *resp);
+ bool_t sdc_lld_send_cmd_long_crc(SDCDriver *sdcp, uint8_t cmd, uint32_t arg,
+ uint32_t *resp);
+ bool_t sdc_lld_read(SDCDriver *sdcp, uint32_t startblk,
+ uint8_t *buf, uint32_t n);
+ bool_t sdc_lld_write(SDCDriver *sdcp, uint32_t startblk,
+ const uint8_t *buf, uint32_t n);
+ bool_t sdc_lld_sync(SDCDriver *sdcp);
+ bool_t sdc_lld_is_card_inserted(SDCDriver *sdcp);
+ bool_t sdc_lld_is_write_protected(SDCDriver *sdcp);
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* HAL_USE_SDC */
+
+#endif /* _SDC_LLD_H_ */
+
+/** @} */
diff --git a/os/hal/platforms/STM32/st_lld.c b/os/hal/platforms/STM32/st_lld.c new file mode 100644 index 000000000..debfde38f --- /dev/null +++ b/os/hal/platforms/STM32/st_lld.c @@ -0,0 +1,138 @@ +/*
+ ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+/**
+ * @file STM32/st_lld.c
+ * @brief ST Driver subsystem low level driver code.
+ *
+ * @addtogroup ST
+ * @{
+ */
+
+#include "hal.h"
+
+#if (OSAL_ST_MODE != OSAL_ST_MODE_NONE) || defined(__DOXYGEN__)
+
+/*===========================================================================*/
+/* Driver local definitions. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver exported variables. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver local types. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver local variables and types. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver local functions. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver interrupt handlers. */
+/*===========================================================================*/
+
+#if (OSAL_ST_MODE == OSAL_ST_MODE_PERIODIC) || defined(__DOXYGEN__)
+/**
+ * @brief System Timer vector.
+ * @details This interrupt is used for system tick in periodic mode.
+ *
+ * @isr
+ */
+OSAL_IRQ_HANDLER(SysTick_Handler) {
+
+ OSAL_IRQ_PROLOGUE();
+
+ osalSysLockFromISR();
+ osalOsTimerHandlerI();
+ osalSysUnlockFromISR();
+
+ OSAL_IRQ_EPILOGUE();
+}
+#endif
+
+#if (OSAL_ST_MODE == OSAL_ST_MODE_FREERUNNING) || defined(__DOXYGEN__)
+/**
+ * @brief TIM2 interrupt handler.
+ * @details This interrupt is used for system tick in free running mode.
+ *
+ * @isr
+ */
+OSAL_IRQ_HANDLER(STM32_TIM2_HANDLER) {
+
+ OSAL_IRQ_PROLOGUE();
+
+ STM32_TIM2->SR = 0;
+
+ osalSysLockFromISR();
+ osalOsTimerHandlerI();
+ osalSysUnlockFromISR();
+
+ OSAL_IRQ_EPILOGUE();
+}
+#endif
+
+/*===========================================================================*/
+/* Driver exported functions. */
+/*===========================================================================*/
+
+/**
+ * @brief Low level ST driver initialization.
+ *
+ * @notapi
+ */
+void st_lld_init(void) {
+
+#if OSAL_ST_MODE == OSAL_ST_MODE_FREERUNNING
+ /* Free running counter mode.*/
+ rccEnableTIM2(FALSE);
+
+ /* Initializing the counter in free running mode.*/
+ STM32_TIM2->PSC = STM32_TIMCLK2 / OSAL_SYSTICK_FREQUENCY - 1;
+ STM32_TIM2->ARR = 0xFFFFFFFF;
+ STM32_TIM2->CCMR1 = 0;
+ STM32_TIM2->CCR[0] = 0;
+ STM32_TIM2->DIER = 0;
+ STM32_TIM2->CR2 = 0;
+ STM32_TIM2->EGR = TIM_EGR_UG;
+ STM32_TIM2->CR1 = TIM_CR1_CEN;
+
+ /* IRQ enabled.*/
+ nvicEnableVector(STM32_TIM2_NUMBER, ST_TIMER_PRIORITY);
+#endif
+
+#if OSAL_ST_MODE == OSAL_ST_MODE_PERIODIC
+ /* Periodic systick mode, the Cortex-Mx internal systick timer is used
+ in this mode.*/
+ SysTick->LOAD = STM32_HCLK / OSAL_SYSTICK_FREQUENCY - 1;
+ SysTick->VAL = 0;
+ SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk |
+ SysTick_CTRL_ENABLE_Msk |
+ SysTick_CTRL_TICKINT_Msk;
+
+ /* IRQ enabled.*/
+ nvicSetSystemHandlerPriority(SysTick_IRQn, ST_TIMER_PRIORITY);
+#endif
+}
+
+#endif /* OSAL_ST_MODE != OSAL_ST_MODE_NONE */
+
+/** @} */
diff --git a/os/hal/platforms/STM32/st_lld.h b/os/hal/platforms/STM32/st_lld.h new file mode 100644 index 000000000..ac17d7ff7 --- /dev/null +++ b/os/hal/platforms/STM32/st_lld.h @@ -0,0 +1,95 @@ +/*
+ ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+/**
+ * @file STM32/st_lld.h
+ * @brief ST Driver subsystem low level driver header.
+ *
+ * @addtogroup ST
+ * @{
+ */
+
+#ifndef _ST_LLD_H_
+#define _ST_LLD_H_
+
+#if (OSAL_ST_MODE != OSAL_ST_MODE_NONE) || defined(__DOXYGEN__)
+
+/*===========================================================================*/
+/* Driver constants. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver pre-compile time settings. */
+/*===========================================================================*/
+
+/**
+ * @name Configuration options
+ * @{
+ */
+/**
+ * @brief SysTick timer priority.
+ */
+#if !defined(ST_TIMER_PRIORITY) || defined(__DOXYGEN__)
+#define ST_TIMER_PRIORITY 8
+#endif
+/** @} */
+
+/*===========================================================================*/
+/* Derived constants and error checks. */
+/*===========================================================================*/
+
+#if !(OSAL_ST_MODE == OSAL_ST_MODE_PERIODIC) && \
+ !(OSAL_ST_MODE == OSAL_ST_MODE_FREERUNNING)
+#error "invalid OSAL_ST_MODE setting in osal.h"
+#endif
+
+#if (OSAL_ST_MODE == OSAL_ST_MODE_FREERUNNING) && !STM32_HAS_TIM2
+#error "TIM2 not present in the selected device"
+#endif
+
+#if (OSAL_ST_MODE == OSAL_ST_MODE_FREERUNNING) && !STM32_TIM2_IS_32BITS
+#error "TIM2 is not a 32 bits timer"
+#endif
+
+/*===========================================================================*/
+/* Driver data structures and types. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver macros. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* External declarations. */
+/*===========================================================================*/
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+ void st_lld_init(void);
+#ifdef __cplusplus
+}
+#endif
+
+/*===========================================================================*/
+/* Driver inline functions. */
+/*===========================================================================*/
+
+#endif /* OSAL_ST_MODE != OSAL_ST_MODE_NONE */
+
+#endif /* _ST_LLD_H_ */
+
+/** @} */
diff --git a/os/hal/platforms/STM32/stm32.h b/os/hal/platforms/STM32/stm32.h new file mode 100644 index 000000000..b56f769b5 --- /dev/null +++ b/os/hal/platforms/STM32/stm32.h @@ -0,0 +1,162 @@ +/*
+ ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+/**
+ * @file STM32/stm32.h
+ * @brief STM32 common header.
+ * @pre One of the following macros must be defined before including
+ * this header, the macro selects the inclusion of the appropriate
+ * vendor header:
+ * - STM32F0XX for Entry Level devices.
+ * - STM32F10X_LD_VL for Value Line Low Density devices.
+ * - STM32F10X_MD_VL for Value Line Medium Density devices.
+ * - STM32F10X_LD for Performance Low Density devices.
+ * - STM32F10X_MD for Performance Medium Density devices.
+ * - STM32F10X_HD for Performance High Density devices.
+ * - STM32F10X_XL for Performance eXtra Density devices.
+ * - STM32F10X_CL for Connectivity Line devices.
+ * - STM32F2XX for High-performance STM32 F-2 devices.
+ * - STM32F30X for Analog & DSP devices.
+ * - STM32F37X for Analog & DSP devices.
+ * - STM32F4XX for High-performance STM32 F-4 devices.
+ * - STM32L1XX_MD for Ultra Low Power Medium-density devices.
+ * .
+ *
+ * @addtogroup HAL
+ * @{
+ */
+
+#ifndef _STM32_H_
+#define _STM32_H_
+
+#if defined(STM32F0XX)
+#include "stm32f0xx.h"
+
+#elif defined(STM32F10X_LD_VL) || defined(STM32F10X_MD_VL) || \
+ defined(STM32F10X_HD_VL) || defined(STM32F10X_LD) || \
+ defined(STM32F10X_MD) || defined(STM32F10X_HD) || \
+ defined(STM32F10X_XL) || defined(STM32F10X_CL) || \
+ defined(__DOXYGEN__)
+#include "stm32f10x.h"
+
+#elif defined(STM32F2XX)
+#include "stm32f2xx.h"
+
+#elif defined(STM32F30X)
+#include "stm32f30x.h"
+
+#elif defined(STM32F37X)
+#include "stm32f37x.h"
+
+#elif defined(STM32F4XX)
+#include "stm32f4xx.h"
+
+#elif defined(STM32L1XX_MD)
+#include "stm32l1xx.h"
+
+#else
+#error "STM32 device not specified"
+#endif
+
+/*===========================================================================*/
+/* Driver constants. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver pre-compile time settings. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Derived constants and error checks. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver data structures and types. */
+/*===========================================================================*/
+
+/**
+ * @brief STM32 TIM registers block.
+ * @note Redefined from the ST headers because the non uniform
+ * declaration of the CCR registers among the various
+ * sub-families.
+ */
+typedef struct {
+ volatile uint16_t CR1;
+ uint16_t _resvd0;
+ volatile uint16_t CR2;
+ uint16_t _resvd1;
+ volatile uint16_t SMCR;
+ uint16_t _resvd2;
+ volatile uint16_t DIER;
+ uint16_t _resvd3;
+ volatile uint16_t SR;
+ uint16_t _resvd4;
+ volatile uint16_t EGR;
+ uint16_t _resvd5;
+ volatile uint16_t CCMR1;
+ uint16_t _resvd6;
+ volatile uint16_t CCMR2;
+ uint16_t _resvd7;
+ volatile uint16_t CCER;
+ uint16_t _resvd8;
+ volatile uint32_t CNT;
+ volatile uint16_t PSC;
+ uint16_t _resvd9;
+ volatile uint32_t ARR;
+ volatile uint16_t RCR;
+ uint16_t _resvd10;
+ volatile uint32_t CCR[4];
+ volatile uint16_t BDTR;
+ uint16_t _resvd11;
+ volatile uint16_t DCR;
+ uint16_t _resvd12;
+ volatile uint16_t DMAR;
+ uint16_t _resvd13;
+ volatile uint16_t OR;
+ uint16_t _resvd14;
+} stm32_tim_t;
+
+/*===========================================================================*/
+/* Driver macros. */
+/*===========================================================================*/
+
+/**
+ * @name TIM units references
+ * @{
+ */
+#define STM32_TIM1 ((stm32_tim_t *)TIM1_BASE)
+#define STM32_TIM2 ((stm32_tim_t *)TIM2_BASE)
+#define STM32_TIM3 ((stm32_tim_t *)TIM3_BASE)
+#define STM32_TIM4 ((stm32_tim_t *)TIM4_BASE)
+#define STM32_TIM5 ((stm32_tim_t *)TIM5_BASE)
+#define STM32_TIM6 ((stm32_tim_t *)TIM6_BASE)
+#define STM32_TIM7 ((stm32_tim_t *)TIM7_BASE)
+#define STM32_TIM8 ((stm32_tim_t *)TIM8_BASE)
+#define STM32_TIM9 ((stm32_tim_t *)TIM9_BASE)
+#define STM32_TIM10 ((stm32_tim_t *)TIM10_BASE)
+#define STM32_TIM11 ((stm32_tim_t *)TIM11_BASE)
+#define STM32_TIM12 ((stm32_tim_t *)TIM12_BASE)
+#define STM32_TIM13 ((stm32_tim_t *)TIM13_BASE)
+#define STM32_TIM14 ((stm32_tim_t *)TIM14_BASE)
+/** @} */
+
+/*===========================================================================*/
+/* External declarations. */
+/*===========================================================================*/
+
+#endif /* _STM32_H_ */
+
+/** @} */
diff --git a/os/hal/platforms/STM32F30x/adc_lld.c b/os/hal/platforms/STM32F30x/adc_lld.c new file mode 100644 index 000000000..768420c52 --- /dev/null +++ b/os/hal/platforms/STM32F30x/adc_lld.c @@ -0,0 +1,551 @@ +/*
+ ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+/**
+ * @file STM32F30x/adc_lld.c
+ * @brief STM32F30x ADC subsystem low level driver source.
+ *
+ * @addtogroup ADC
+ * @{
+ */
+
+#include "hal.h"
+
+#if HAL_USE_ADC || defined(__DOXYGEN__)
+
+/*===========================================================================*/
+/* Driver local definitions. */
+/*===========================================================================*/
+
+#if STM32_ADC_DUAL_MODE
+#if STM32_ADC_COMPACT_SAMPLES
+/* Compact type dual mode.*/
+#define ADC_DMA_SIZE (STM32_DMA_CR_MSIZE_HWORD | STM32_DMA_CR_PSIZE_HWORD)
+#define ADC_DMA_MDMA ADC_CCR_MDMA_HWORD
+
+#else /* !STM32_ADC_COMPACT_SAMPLES */
+/* Large type dual mode.*/
+#define ADC_DMA_SIZE (STM32_DMA_CR_MSIZE_WORD | STM32_DMA_CR_PSIZE_WORD)
+#define ADC_DMA_MDMA ADC_CCR_MDMA_WORD
+#endif /* !STM32_ADC_COMPACT_SAMPLES */
+
+#else /* !STM32_ADC_DUAL_MODE */
+#if STM32_ADC_COMPACT_SAMPLES
+/* Compact type single mode.*/
+#define ADC_DMA_SIZE (STM32_DMA_CR_MSIZE_BYTE | STM32_DMA_CR_PSIZE_BYTE)
+#define ADC_DMA_MDMA ADC_CCR_MDMA_DISABLED
+
+#else /* !STM32_ADC_COMPACT_SAMPLES */
+/* Large type single mode.*/
+#define ADC_DMA_SIZE (STM32_DMA_CR_MSIZE_HWORD | STM32_DMA_CR_PSIZE_HWORD)
+#define ADC_DMA_MDMA ADC_CCR_MDMA_DISABLED
+#endif /* !STM32_ADC_COMPACT_SAMPLES */
+#endif /* !STM32_ADC_DUAL_MODE */
+
+/*===========================================================================*/
+/* Driver exported variables. */
+/*===========================================================================*/
+
+/** @brief ADC1 driver identifier.*/
+#if STM32_ADC_USE_ADC1 || defined(__DOXYGEN__)
+ADCDriver ADCD1;
+#endif
+
+/** @brief ADC1 driver identifier.*/
+#if STM32_ADC_USE_ADC3 || defined(__DOXYGEN__)
+ADCDriver ADCD3;
+#endif
+
+/*===========================================================================*/
+/* Driver local variables and types. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver local functions. */
+/*===========================================================================*/
+
+/**
+ * @brief Enables the ADC voltage regulator.
+ *
+ * @param[in] adcp pointer to the @p ADCDriver object
+ */
+static void adc_lld_vreg_on(ADCDriver *adcp) {
+
+ adcp->adcm->CR = 0; /* RM 12.4.3.*/
+ adcp->adcm->CR = ADC_CR_ADVREGEN_0;
+#if STM32_ADC_DUAL_MODE
+ adcp->adcs->CR = ADC_CR_ADVREGEN_0;
+#endif
+ osalSysPolledDelayX(US2RTC(10));
+}
+
+/**
+ * @brief Disables the ADC voltage regulator.
+ *
+ * @param[in] adcp pointer to the @p ADCDriver object
+ */
+static void adc_lld_vreg_off(ADCDriver *adcp) {
+
+ adcp->adcm->CR = 0; /* RM 12.4.3.*/
+ adcp->adcm->CR = ADC_CR_ADVREGEN_1;
+#if STM32_ADC_DUAL_MODE
+ adcp->adcs->CR = ADC_CR_ADVREGEN_1;
+#endif
+}
+
+/**
+ * @brief Enables the ADC analog circuit.
+ *
+ * @param[in] adcp pointer to the @p ADCDriver object
+ */
+static void adc_lld_analog_on(ADCDriver *adcp) {
+
+ adcp->adcm->CR |= ADC_CR_ADEN;
+ while ((adcp->adcm->ISR & ADC_ISR_ADRDY) == 0)
+ ;
+#if STM32_ADC_DUAL_MODE
+ adcp->adcs->CR |= ADC_CR_ADEN;
+ while ((adcp->adcs->ISR & ADC_ISR_ADRDY) == 0)
+ ;
+#endif
+}
+
+/**
+ * @brief Disables the ADC analog circuit.
+ *
+ * @param[in] adcp pointer to the @p ADCDriver object
+ */
+static void adc_lld_analog_off(ADCDriver *adcp) {
+
+ adcp->adcm->CR |= ADC_CR_ADDIS;
+ while ((adcp->adcm->CR & ADC_CR_ADDIS) != 0)
+ ;
+#if STM32_ADC_DUAL_MODE
+ adcp->adcs->CR |= ADC_CR_ADDIS;
+ while ((adcp->adcs->CR & ADC_CR_ADDIS) != 0)
+ ;
+#endif
+}
+
+/**
+ * @brief Calibrates and ADC unit.
+ *
+ * @param[in] adcp pointer to the @p ADCDriver object
+ */
+static void adc_lld_calibrate(ADCDriver *adcp) {
+
+ osalDbgAssert(adcp->adcm->CR == ADC_CR_ADVREGEN_0, "adc_lld_calibrate(), #1",
+ "invalid register state");
+ adcp->adcm->CR |= ADC_CR_ADCAL;
+ while ((adcp->adcm->CR & ADC_CR_ADCAL) != 0)
+ ;
+#if STM32_ADC_DUAL_MODE
+ osalDbgAssert(adcp->adcs->CR == ADC_CR_ADVREGEN_0, "adc_lld_calibrate(), #2",
+ "invalid register state");
+ adcp->adcs->CR |= ADC_CR_ADCAL;
+ while ((adcp->adcs->CR & ADC_CR_ADCAL) != 0)
+ ;
+#endif
+}
+
+/**
+ * @brief Stops an ongoing conversion, if any.
+ *
+ * @param[in] adcp pointer to the @p ADCDriver object
+ */
+static void adc_lld_stop_adc(ADCDriver *adcp) {
+
+ if (adcp->adcm->CR & ADC_CR_ADSTART) {
+ adcp->adcm->CR |= ADC_CR_ADSTP;
+ while (adcp->adcm->CR & ADC_CR_ADSTP)
+ ;
+ }
+}
+
+/**
+ * @brief ADC DMA ISR service routine.
+ *
+ * @param[in] adcp pointer to the @p ADCDriver object
+ * @param[in] flags pre-shifted content of the ISR register
+ */
+static void adc_lld_serve_dma_interrupt(ADCDriver *adcp, uint32_t flags) {
+
+ /* DMA errors handling.*/
+ if ((flags & (STM32_DMA_ISR_TEIF | STM32_DMA_ISR_DMEIF)) != 0) {
+ /* DMA, this could help only if the DMA tries to access an unmapped
+ address space or violates alignment rules.*/
+ _adc_isr_error_code(adcp, ADC_ERR_DMAFAILURE);
+ }
+ else {
+ /* It is possible that the conversion group has already be reset by the
+ ADC error handler, in this case this interrupt is spurious.*/
+ if (adcp->grpp != NULL) {
+ if ((flags & STM32_DMA_ISR_HTIF) != 0) {
+ /* Half transfer processing.*/
+ _adc_isr_half_code(adcp);
+ }
+ if ((flags & STM32_DMA_ISR_TCIF) != 0) {
+ /* Transfer complete processing.*/
+ _adc_isr_full_code(adcp);
+ }
+ }
+ }
+}
+
+/**
+ * @brief ADC ISR service routine.
+ *
+ * @param[in] adcp pointer to the @p ADCDriver object
+ * @param[in] isr content of the ISR register
+ */
+static void adc_lld_serve_interrupt(ADCDriver *adcp, uint32_t isr) {
+
+ /* It could be a spurious interrupt caused by overflows after DMA disabling,
+ just ignore it in this case.*/
+ if (adcp->grpp != NULL) {
+ /* Note, an overflow may occur after the conversion ended before the driver
+ is able to stop the ADC, this is why the DMA channel is checked too.*/
+ if ((isr & ADC_ISR_OVR) &&
+ (dmaStreamGetTransactionSize(adcp->dmastp) > 0)) {
+ /* ADC overflow condition, this could happen only if the DMA is unable
+ to read data fast enough.*/
+ _adc_isr_error_code(adcp, ADC_ERR_OVERFLOW);
+ }
+ if (isr & ADC_ISR_AWD1) {
+ /* Analog watchdog error.*/
+ _adc_isr_error_code(adcp, ADC_ERR_AWD1);
+ }
+ if (isr & ADC_ISR_AWD2) {
+ /* Analog watchdog error.*/
+ _adc_isr_error_code(adcp, ADC_ERR_AWD2);
+ }
+ if (isr & ADC_ISR_AWD3) {
+ /* Analog watchdog error.*/
+ _adc_isr_error_code(adcp, ADC_ERR_AWD3);
+ }
+ }
+}
+
+/*===========================================================================*/
+/* Driver interrupt handlers. */
+/*===========================================================================*/
+
+#if STM32_ADC_USE_ADC1 || defined(__DOXYGEN__)
+/**
+ * @brief ADC1/ADC2 interrupt handler.
+ *
+ * @isr
+ */
+OSAL_IRQ_HANDLER(Vector88) {
+ uint32_t isr;
+
+ OSAL_IRQ_PROLOGUE();
+
+#if STM32_ADC_DUAL_MODE
+ isr = ADC1->ISR;
+ isr |= ADC2->ISR;
+ ADC1->ISR = isr;
+ ADC2->ISR = isr;
+#else /* !STM32_ADC_DUAL_MODE */
+ isr = ADC1->ISR;
+ ADC1->ISR = isr;
+#endif /* !STM32_ADC_DUAL_MODE */
+
+ adc_lld_serve_interrupt(&ADCD1, isr);
+
+ OSAL_IRQ_EPILOGUE();
+}
+#endif /* STM32_ADC_USE_ADC1 */
+
+#if STM32_ADC_USE_ADC3 || defined(__DOXYGEN__)
+/**
+ * @brief ADC3 interrupt handler.
+ *
+ * @isr
+ */
+OSAL_IRQ_HANDLER(VectorFC) {
+ uint32_t isr;
+
+ OSAL_IRQ_PROLOGUE();
+
+ isr = ADC3->ISR;
+ ADC3->ISR = isr;
+
+ adc_lld_serve_interrupt(&ADCD3, isr);
+
+ OSAL_IRQ_EPILOGUE();
+}
+
+#if STM32_ADC_DUAL_MODE
+/**
+ * @brief ADC4 interrupt handler (as ADC3 slave).
+ *
+ * @isr
+ */
+OSAL_IRQ_HANDLER(Vector134) {
+ uint32_t isr;
+
+ OSAL_IRQ_PROLOGUE();
+
+ isr = ADC4->ISR;
+ ADC4->ISR = isr;
+
+ adc_lld_serve_interrupt(&ADCD3, isr);
+
+ OSAL_IRQ_EPILOGUE();
+}
+#endif /* STM32_ADC_DUAL_MODE */
+#endif /* STM32_ADC_USE_ADC3 */
+
+/*===========================================================================*/
+/* Driver exported functions. */
+/*===========================================================================*/
+
+/**
+ * @brief Low level ADC driver initialization.
+ *
+ * @notapi
+ */
+void adc_lld_init(void) {
+
+#if STM32_ADC_USE_ADC1
+ /* Driver initialization.*/
+ adcObjectInit(&ADCD1);
+ ADCD1.adcc = ADC1_2;
+ ADCD1.adcm = ADC1;
+#if STM32_ADC_DUAL_MODE
+ ADCD1.adcs = ADC2;
+#endif
+ ADCD1.dmastp = STM32_DMA1_STREAM1;
+ ADCD1.dmamode = ADC_DMA_SIZE |
+ STM32_DMA_CR_PL(STM32_ADC_ADC12_DMA_PRIORITY) |
+ STM32_DMA_CR_DIR_P2M |
+ STM32_DMA_CR_MINC | STM32_DMA_CR_TCIE |
+ STM32_DMA_CR_DMEIE | STM32_DMA_CR_TEIE;
+ nvicEnableVector(ADC1_2_IRQn, STM32_ADC_ADC12_IRQ_PRIORITY);
+#endif /* STM32_ADC_USE_ADC1 */
+
+#if STM32_ADC_USE_ADC3
+ /* Driver initialization.*/
+ adcObjectInit(&ADCD3);
+ ADCD3.adcc = ADC3_4;
+ ADCD3.adcm = ADC3;
+#if STM32_ADC_DUAL_MODE
+ ADCD3.adcs = ADC4;
+#endif
+ ADCD3.dmastp = STM32_DMA2_STREAM5;
+ ADCD3.dmamode = ADC_DMA_SIZE |
+ STM32_DMA_CR_PL(STM32_ADC_ADC12_DMA_PRIORITY) |
+ STM32_DMA_CR_DIR_P2M |
+ STM32_DMA_CR_MINC | STM32_DMA_CR_TCIE |
+ STM32_DMA_CR_DMEIE | STM32_DMA_CR_TEIE;
+ nvicEnableVector(ADC3_IRQn, STM32_ADC_ADC34_IRQ_PRIORITY);
+#if STM32_ADC_DUAL_MODE
+ nvicEnableVector(ADC4_IRQn, STM32_ADC_ADC34_IRQ_PRIORITY);
+#endif
+#endif /* STM32_ADC_USE_ADC3 */
+}
+
+/**
+ * @brief Configures and activates the ADC peripheral.
+ *
+ * @param[in] adcp pointer to the @p ADCDriver object
+ *
+ * @notapi
+ */
+void adc_lld_start(ADCDriver *adcp) {
+
+ /* If in stopped state then enables the ADC and DMA clocks.*/
+ if (adcp->state == ADC_STOP) {
+#if STM32_ADC_USE_ADC1
+ if (&ADCD1 == adcp) {
+ bool_t b;
+ b = dmaStreamAllocate(adcp->dmastp,
+ STM32_ADC_ADC12_DMA_IRQ_PRIORITY,
+ (stm32_dmaisr_t)adc_lld_serve_dma_interrupt,
+ (void *)adcp);
+ osalDbgAssert(!b, "adc_lld_start(), #1", "stream already allocated");
+ rccEnableADC12(FALSE);
+ }
+#endif /* STM32_ADC_USE_ADC1 */
+
+#if STM32_ADC_USE_ADC3
+ if (&ADCD3 == adcp) {
+ bool_t b;
+ b = dmaStreamAllocate(adcp->dmastp,
+ STM32_ADC_ADC34_DMA_IRQ_PRIORITY,
+ (stm32_dmaisr_t)adc_lld_serve_dma_interrupt,
+ (void *)adcp);
+ osalDbgAssert(!b, "adc_lld_start(), #2", "stream already allocated");
+ rccEnableADC34(FALSE);
+ }
+#endif /* STM32_ADC_USE_ADC2 */
+
+ /* Setting DMA peripheral-side pointer.*/
+#if STM32_ADC_DUAL_MODE
+ dmaStreamSetPeripheral(adcp->dmastp, &adcp->adcc->CDR);
+#else
+ dmaStreamSetPeripheral(adcp->dmastp, &adcp->adcm->DR);
+#endif
+
+ /* Clock source setting.*/
+ adcp->adcc->CCR = STM32_ADC_ADC12_CLOCK_MODE | ADC_DMA_MDMA;
+
+ /* Master ADC calibration.*/
+ adc_lld_vreg_on(adcp);
+ adc_lld_calibrate(adcp);
+
+ /* Master ADC enabled here in order to reduce conversions latencies.*/
+ adc_lld_analog_on(adcp);
+ }
+}
+
+/**
+ * @brief Deactivates the ADC peripheral.
+ *
+ * @param[in] adcp pointer to the @p ADCDriver object
+ *
+ * @notapi
+ */
+void adc_lld_stop(ADCDriver *adcp) {
+
+ /* If in ready state then disables the ADC clock and analog part.*/
+ if (adcp->state == ADC_READY) {
+
+ /* Releasing the associated DMA channel.*/
+ dmaStreamRelease(adcp->dmastp);
+
+ /* Stopping the ongoing conversion, if any.*/
+ adc_lld_stop_adc(adcp);
+
+ /* Disabling ADC analog circuit and regulator.*/
+ adc_lld_analog_off(adcp);
+ adc_lld_vreg_off(adcp);
+
+#if STM32_ADC_USE_ADC1
+ if (&ADCD1 == adcp)
+ rccDisableADC12(FALSE);
+#endif
+
+#if STM32_ADC_USE_ADC3
+ if (&ADCD1 == adcp)
+ rccDisableADC34(FALSE);
+#endif
+ }
+}
+
+/**
+ * @brief Starts an ADC conversion.
+ *
+ * @param[in] adcp pointer to the @p ADCDriver object
+ *
+ * @notapi
+ */
+void adc_lld_start_conversion(ADCDriver *adcp) {
+ uint32_t dmamode, ccr, cfgr;
+ const ADCConversionGroup *grpp = adcp->grpp;
+
+ osalDbgAssert(!STM32_ADC_DUAL_MODE || ((grpp->num_channels & 1) == 0),
+ "adc_lld_start_conversion(), #1",
+ "odd number of channels in dual mode");
+
+ /* Calculating control registers values.*/
+ dmamode = adcp->dmamode;
+ ccr = grpp->ccr | (adcp->adcc->CCR & (ADC_CCR_CKMODE_MASK |
+ ADC_CCR_MDMA_MASK));
+ cfgr = grpp->cfgr | ADC_CFGR_CONT | ADC_CFGR_DMAEN;
+ if (grpp->circular) {
+ dmamode |= STM32_DMA_CR_CIRC;
+#if STM32_ADC_DUAL_MODE
+ ccr |= ADC_CCR_DMACFG_CIRCULAR;
+#else
+ cfgr |= ADC_CFGR_DMACFG_CIRCULAR;
+#endif
+ }
+
+ /* DMA setup.*/
+ if (adcp->depth > 1) {
+ /* If the buffer depth is greater than one then the half transfer interrupt
+ interrupt is enabled in order to allows streaming processing.*/
+ dmamode |= STM32_DMA_CR_HTIE;
+ }
+ dmaStreamSetMemory0(adcp->dmastp, adcp->samples);
+#if STM32_ADC_DUAL_MODE
+ dmaStreamSetTransactionSize(adcp->dmastp, ((uint32_t)grpp->num_channels/2) *
+ (uint32_t)adcp->depth);
+#else
+ dmaStreamSetTransactionSize(adcp->dmastp, (uint32_t)grpp->num_channels *
+ (uint32_t)adcp->depth);
+#endif
+ dmaStreamSetMode(adcp->dmastp, dmamode);
+ dmaStreamEnable(adcp->dmastp);
+
+ /* Configuring the CCR register with the static settings ORed with
+ the user-specified settings in the conversion group configuration
+ structure.*/
+ adcp->adcc->CCR = ccr;
+
+ /* ADC setup, if it is defined a callback for the analog watch dog then it
+ is enabled.*/
+ adcp->adcm->ISR = adcp->adcm->ISR;
+ adcp->adcm->IER = ADC_IER_OVR | ADC_IER_AWD1;
+ adcp->adcm->TR1 = grpp->tr1;
+#if STM32_ADC_DUAL_MODE
+ adcp->adcm->SMPR1 = grpp->smpr[0];
+ adcp->adcm->SMPR2 = grpp->smpr[1];
+ adcp->adcm->SQR1 = grpp->sqr[0] | ADC_SQR1_NUM_CH(grpp->num_channels / 2);
+ adcp->adcm->SQR2 = grpp->sqr[1];
+ adcp->adcm->SQR3 = grpp->sqr[2];
+ adcp->adcm->SQR4 = grpp->sqr[3];
+ adcp->adcs->SMPR1 = grpp->ssmpr[0];
+ adcp->adcs->SMPR2 = grpp->ssmpr[1];
+ adcp->adcs->SQR1 = grpp->ssqr[0] | ADC_SQR1_NUM_CH(grpp->num_channels / 2);
+ adcp->adcs->SQR2 = grpp->ssqr[1];
+ adcp->adcs->SQR3 = grpp->ssqr[2];
+ adcp->adcs->SQR4 = grpp->ssqr[3];
+
+#else /* !STM32_ADC_DUAL_MODE */
+ adcp->adcm->SMPR1 = grpp->smpr[0];
+ adcp->adcm->SMPR2 = grpp->smpr[1];
+ adcp->adcm->SQR1 = grpp->sqr[0] | ADC_SQR1_NUM_CH(grpp->num_channels);
+ adcp->adcm->SQR2 = grpp->sqr[1];
+ adcp->adcm->SQR3 = grpp->sqr[2];
+ adcp->adcm->SQR4 = grpp->sqr[3];
+#endif /* !STM32_ADC_DUAL_MODE */
+
+ /* ADC configuration.*/
+ adcp->adcm->CFGR = cfgr;
+
+ /* Starting conversion.*/
+ adcp->adcm->CR |= ADC_CR_ADSTART;
+}
+
+/**
+ * @brief Stops an ongoing conversion.
+ *
+ * @param[in] adcp pointer to the @p ADCDriver object
+ *
+ * @notapi
+ */
+void adc_lld_stop_conversion(ADCDriver *adcp) {
+
+ dmaStreamDisable(adcp->dmastp);
+ adc_lld_stop_adc(adcp);
+}
+
+#endif /* HAL_USE_ADC */
+
+/** @} */
diff --git a/os/hal/platforms/STM32F30x/adc_lld.h b/os/hal/platforms/STM32F30x/adc_lld.h new file mode 100644 index 000000000..66c725cdd --- /dev/null +++ b/os/hal/platforms/STM32F30x/adc_lld.h @@ -0,0 +1,608 @@ +/*
+ ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+/**
+ * @file STM32F30x/adc_lld.h
+ * @brief STM32F30x ADC subsystem low level driver header.
+ *
+ * @addtogroup ADC
+ * @{
+ */
+
+#ifndef _ADC_LLD_H_
+#define _ADC_LLD_H_
+
+#if HAL_USE_ADC || defined(__DOXYGEN__)
+
+/*===========================================================================*/
+/* Driver constants. */
+/*===========================================================================*/
+
+/**
+ * @name Available analog channels
+ * @{
+ */
+#define ADC_CHANNEL_IN1 1 /**< @brief External analog input 1. */
+#define ADC_CHANNEL_IN2 2 /**< @brief External analog input 2. */
+#define ADC_CHANNEL_IN3 3 /**< @brief External analog input 3. */
+#define ADC_CHANNEL_IN4 4 /**< @brief External analog input 4. */
+#define ADC_CHANNEL_IN5 5 /**< @brief External analog input 5. */
+#define ADC_CHANNEL_IN6 6 /**< @brief External analog input 6. */
+#define ADC_CHANNEL_IN7 7 /**< @brief External analog input 7. */
+#define ADC_CHANNEL_IN8 8 /**< @brief External analog input 8. */
+#define ADC_CHANNEL_IN9 9 /**< @brief External analog input 9. */
+#define ADC_CHANNEL_IN10 10 /**< @brief External analog input 10. */
+#define ADC_CHANNEL_IN11 11 /**< @brief External analog input 11. */
+#define ADC_CHANNEL_IN12 12 /**< @brief External analog input 12. */
+#define ADC_CHANNEL_IN13 13 /**< @brief External analog input 13. */
+#define ADC_CHANNEL_IN14 14 /**< @brief External analog input 14. */
+#define ADC_CHANNEL_IN15 15 /**< @brief External analog input 15. */
+#define ADC_CHANNEL_IN16 16 /**< @brief External analog input 16. */
+#define ADC_CHANNEL_IN17 17 /**< @brief External analog input 17. */
+#define ADC_CHANNEL_IN18 18 /**< @brief External analog input 18. */
+/** @} */
+
+/**
+ * @name Sampling rates
+ * @{
+ */
+#define ADC_SMPR_SMP_1P5 0 /**< @brief 14 cycles conversion time */
+#define ADC_SMPR_SMP_2P5 1 /**< @brief 15 cycles conversion time. */
+#define ADC_SMPR_SMP_4P5 2 /**< @brief 17 cycles conversion time. */
+#define ADC_SMPR_SMP_7P5 3 /**< @brief 20 cycles conversion time. */
+#define ADC_SMPR_SMP_19P5 4 /**< @brief 32 cycles conversion time. */
+#define ADC_SMPR_SMP_61P5 5 /**< @brief 74 cycles conversion time. */
+#define ADC_SMPR_SMP_181P5 6 /**< @brief 194 cycles conversion time. */
+#define ADC_SMPR_SMP_601P5 7 /**< @brief 614 cycles conversion time. */
+/** @} */
+
+/**
+ * @name Resolution
+ * @{
+ */
+#define ADC_CFGR1_RES_12BIT (0 << 3)
+#define ADC_CFGR1_RES_10BIT (1 << 3)
+#define ADC_CFGR1_RES_8BIT (2 << 3)
+#define ADC_CFGR1_RES_6BIT (3 << 3)
+/** @} */
+
+/**
+ * @name CFGR register configuration helpers
+ * @{
+ */
+#define ADC_CFGR_DMACFG_MASK (1 << 1)
+#define ADC_CFGR_DMACFG_ONESHOT (0 << 1)
+#define ADC_CFGR_DMACFG_CIRCULAR (1 << 1)
+
+#define ADC_CFGR_RES_MASK (3 << 3)
+#define ADC_CFGR_RES_12BITS (0 << 3)
+#define ADC_CFGR_RES_10BITS (1 << 3)
+#define ADC_CFGR_RES_8BITS (2 << 3)
+#define ADC_CFGR_RES_6BITS (3 << 3)
+
+#define ADC_CFGR_ALIGN_MASK (1 << 5)
+#define ADC_CFGR_ALIGN_RIGHT (0 << 5)
+#define ADC_CFGR_ALIGN_LEFT (1 << 5)
+
+#define ADC_CFGR_EXTSEL_MASK (15 << 6)
+#define ADC_CFGR_EXTSEL_SRC(n) ((n) << 6)
+
+#define ADC_CFGR_EXTEN_MASK (3 << 10)
+#define ADC_CFGR_EXTEN_DISABLED (0 << 10)
+#define ADC_CFGR_EXTEN_RISING (1 << 10)
+#define ADC_CFGR_EXTEN_FALLING (2 << 10)
+#define ADC_CFGR_EXTEN_BOTH (3 << 10)
+
+#define ADC_CFGR_DISCEN_MASK (1 << 16)
+#define ADC_CFGR_DISCEN_DISABLED (0 << 16)
+#define ADC_CFGR_DISCEN_ENABLED (1 << 16)
+
+#define ADC_CFGR_DISCNUM_MASK (7 << 17)
+#define ADC_CFGR_DISCNUM_VAL(n) ((n) << 17)
+
+#define ADC_CFGR_AWD1_DISABLED 0
+#define ADC_CFGR_AWD1_ALL (1 << 23)
+#define ADC_CFGR_AWD1_SINGLE(n) (((n) << 26) | (1 << 23) | (1 << 22))
+/** @} */
+
+/**
+ * @name CCR register configuration helpers
+ * @{
+ */
+#define ADC_CCR_DUAL_MASK (31 << 0)
+#define ADC_CCR_DUAL(n) ((n) << 0)
+#define ADC_CCR_DELAY_MASK (15 << 8)
+#define ADC_CCR_DELAY(n) ((n) << 8)
+#define ADC_CCR_DMACFG_MASK (1 << 13)
+#define ADC_CCR_DMACFG_ONESHOT (0 << 13)
+#define ADC_CCR_DMACFG_CIRCULAR (1 << 13)
+#define ADC_CCR_MDMA_MASK (3 << 14)
+#define ADC_CCR_MDMA_DISABLED (0 << 14)
+#define ADC_CCR_MDMA_WORD (2 << 14)
+#define ADC_CCR_MDMA_HWORD (3 << 14)
+#define ADC_CCR_CKMODE_MASK (3 << 16)
+#define ADC_CCR_CKMODE_ADCCK (0 << 16)
+#define ADC_CCR_CKMODE_AHB_DIV1 (1 << 16)
+#define ADC_CCR_CKMODE_AHB_DIV2 (2 << 16)
+#define ADC_CCR_CKMODE_AHB_DIV4 (3 << 16)
+#define ADC_CCR_VREFEN (1 << 22)
+#define ADC_CCR_TSEN (1 << 23)
+#define ADC_CCR_VBATEN (1 << 24)
+/** @} */
+
+/*===========================================================================*/
+/* Driver pre-compile time settings. */
+/*===========================================================================*/
+
+/**
+ * @name Configuration options
+ * @{
+ */
+/**
+ * @brief ADC1 driver enable switch.
+ * @details If set to @p TRUE the support for ADC1 is included.
+ * @note The default is @p FALSE.
+ */
+#if !defined(STM32_ADC_USE_ADC1) || defined(__DOXYGEN__)
+#define STM32_ADC_USE_ADC1 FALSE
+#endif
+
+/**
+ * @brief ADC3 driver enable switch.
+ * @details If set to @p TRUE the support for ADC3 is included.
+ * @note The default is @p FALSE.
+ */
+#if !defined(STM32_ADC_USE_ADC3) || defined(__DOXYGEN__)
+#define STM32_ADC_USE_ADC3 FALSE
+#endif
+
+/**
+ * @brief ADC1/ADC2 DMA priority (0..3|lowest..highest).
+ */
+#if !defined(STM32_ADC_ADC12_DMA_PRIORITY) || defined(__DOXYGEN__)
+#define STM32_ADC_ADC12_DMA_PRIORITY 2
+#endif
+
+/**
+ * @brief ADC3/ADC4 DMA priority (0..3|lowest..highest).
+ */
+#if !defined(STM32_ADC_ADC34_DMA_PRIORITY) || defined(__DOXYGEN__)
+#define STM32_ADC_ADC34_DMA_PRIORITY 2
+#endif
+
+/**
+ * @brief ADC1/ADC2 interrupt priority level setting.
+ */
+#if !defined(STM32_ADC_ADC12_IRQ_PRIORITY) || defined(__DOXYGEN__)
+#define STM32_ADC_ADC12_IRQ_PRIORITY 5
+#endif
+
+/**
+ * @brief ADC3/ADC4 interrupt priority level setting.
+ */
+#if !defined(STM32_ADC34_IRQ_PRIORITY) || defined(__DOXYGEN__)
+#define STM32_ADC_ADC34_IRQ_PRIORITY 5
+#endif
+
+/**
+ * @brief ADC1/ADC2 DMA interrupt priority level setting.
+ */
+#if !defined(STM32_ADC_ADC12_DMA_IRQ_PRIORITY) || defined(__DOXYGEN__)
+#define STM32_ADC_ADC12_DMA_IRQ_PRIORITY 5
+#endif
+
+/**
+ * @brief ADC3/ADC4 DMA interrupt priority level setting.
+ */
+#if !defined(STM32_ADC_ADC34_DMA_IRQ_PRIORITY) || defined(__DOXYGEN__)
+#define STM32_ADC_ADC34_DMA_IRQ_PRIORITY 5
+#endif
+
+/**
+ * @brief ADC1/ADC2 clock source and mode.
+ */
+#if !defined(STM32_ADC_ADC12_CLOCK_MODE) || defined(__DOXYGEN__)
+#define STM32_ADC_ADC12_CLOCK_MODE ADC_CCR_CKMODE_AHB_DIV1
+#endif
+
+/**
+ * @brief ADC3/ADC4 clock source and mode.
+ */
+#if !defined(STM32_ADC_ADC34_CLOCK_MODE) || defined(__DOXYGEN__)
+#define STM32_ADC_ADC34_CLOCK_MODE ADC_CCR_CKMODE_AHB_DIV1
+#endif
+
+/**
+ * @brief Enables the ADC master/slave mode.
+ */
+#if !defined(STM32_ADC_DUAL_MODE) || defined(__DOXYGEN__)
+#define STM32_ADC_DUAL_MODE FALSE
+#endif
+
+/**
+ * @brief Makes the ADC samples type an 8bits one.
+ */
+#if !defined(STM32_ADC_COMPACT_SAMPLES) || defined(__DOXYGEN__)
+#define STM32_ADC_COMPACT_SAMPLES FALSE
+#endif
+/** @} */
+
+/*===========================================================================*/
+/* Derived constants and error checks. */
+/*===========================================================================*/
+
+#if STM32_ADC_USE_ADC1 && !STM32_HAS_ADC1
+#error "ADC1 not present in the selected device"
+#endif
+
+#if STM32_ADC_USE_ADC3 && !STM32_HAS_ADC3
+#error "ADC3 not present in the selected device"
+#endif
+
+#if !STM32_ADC_USE_ADC1 && !STM32_ADC_USE_ADC3
+#error "ADC driver activated but no ADC peripheral assigned"
+#endif
+
+#if STM32_ADC_USE_ADC1 && \
+ !CORTEX_IS_VALID_KERNEL_PRIORITY(STM32_ADC_ADC12_IRQ_PRIORITY)
+#error "Invalid IRQ priority assigned to ADC1"
+#endif
+
+#if STM32_ADC_USE_ADC1 && \
+ !CORTEX_IS_VALID_KERNEL_PRIORITY(STM32_ADC_ADC12_DMA_IRQ_PRIORITY)
+#error "Invalid IRQ priority assigned to ADC1 DMA"
+#endif
+
+#if STM32_ADC_USE_ADC1 && \
+ !STM32_DMA_IS_VALID_PRIORITY(STM32_ADC_ADC12_DMA_PRIORITY)
+#error "Invalid DMA priority assigned to ADC1"
+#endif
+
+#if STM32_ADC_USE_ADC3 && \
+ !CORTEX_IS_VALID_KERNEL_PRIORITY(STM32_ADC_ADC34_IRQ_PRIORITY)
+#error "Invalid IRQ priority assigned to ADC3"
+#endif
+
+#if STM32_ADC_USE_ADC3 && \
+ !CORTEX_IS_VALID_KERNEL_PRIORITY(STM32_ADC_ADC34_DMA_IRQ_PRIORITY)
+#error "Invalid IRQ priority assigned to ADC3 DMA"
+#endif
+
+#if STM32_ADC_USE_ADC3 && \
+ !STM32_DMA_IS_VALID_PRIORITY(STM32_ADC_ADC34_DMA_PRIORITY)
+#error "Invalid DMA priority assigned to ADC3"
+#endif
+
+#if STM32_ADC_ADC12_CLOCK_MODE == ADC_CCR_CKMODE_ADCCK
+#define STM32_ADC12_CLOCK STM32_ADC12CLK
+#elif STM32_ADC_ADC12_CLOCK_MODE == ADC_CCR_CKMODE_AHB_DIV1
+#define STM32_ADC12_CLOCK (STM32_HCLK / 1)
+#elif STM32_ADC_ADC12_CLOCK_MODE == ADC_CCR_CKMODE_AHB_DIV2
+#define STM32_ADC12_CLOCK (STM32_HCLK / 2)
+#elif STM32_ADC_ADC12_CLOCK_MODE == ADC_CCR_CKMODE_AHB_DIV4
+#define STM32_ADC12_CLOCK (STM32_HCLK / 4)
+#else
+#error "invalid clock mode selected for STM32_ADC_ADC12_CLOCK_MODE"
+#endif
+
+#if STM32_ADC_ADC34_CLOCK_MODE == ADC_CCR_CKMODE_ADCCK
+#define STM32_ADC34_CLOCK STM32_ADC34CLK
+#elif STM32_ADC_ADC34_CLOCK_MODE == ADC_CCR_CKMODE_AHB_DIV1
+#define STM32_ADC34_CLOCK (STM32_HCLK / 1)
+#elif STM32_ADC_ADC34_CLOCK_MODE == ADC_CCR_CKMODE_AHB_DIV2
+#define STM32_ADC34_CLOCK (STM32_HCLK / 2)
+#elif STM32_ADC_ADC34_CLOCK_MODE == ADC_CCR_CKMODE_AHB_DIV4
+#define STM32_ADC34_CLOCK (STM32_HCLK / 4)
+#else
+#error "invalid clock mode selected for STM32_ADC_ADC12_CLOCK_MODE"
+#endif
+
+#if STM32_ADC12_CLOCK > 72000000
+#error "STM32_ADC12_CLOCK exceeding maximum frequency (72000000)"
+#endif
+
+#if STM32_ADC34_CLOCK > 72000000
+#error "STM32_ADC34_CLOCK exceeding maximum frequency (72000000)"
+#endif
+
+#if !defined(STM32_DMA_REQUIRED)
+#define STM32_DMA_REQUIRED
+#endif
+
+/*===========================================================================*/
+/* Driver data structures and types. */
+/*===========================================================================*/
+
+/**
+ * @brief ADC sample data type.
+ */
+#if !STM32_ADC_COMPACT_SAMPLES || defined(__DOXYGEN__)
+typedef uint16_t adcsample_t;
+#else
+typedef uint8_t adcsample_t;
+#endif
+
+/**
+ * @brief Channels number in a conversion group.
+ */
+typedef uint16_t adc_channels_num_t;
+
+/**
+ * @brief Possible ADC failure causes.
+ * @note Error codes are architecture dependent and should not relied
+ * upon.
+ */
+typedef enum {
+ ADC_ERR_DMAFAILURE = 0, /**< DMA operations failure. */
+ ADC_ERR_OVERFLOW = 1, /**< ADC overflow condition. */
+ ADC_ERR_AWD1 = 2, /**< Watchdog 1 triggered. */
+ ADC_ERR_AWD2 = 3, /**< Watchdog 2 triggered. */
+ ADC_ERR_AWD3 = 4 /**< Watchdog 3 triggered. */
+} adcerror_t;
+
+/**
+ * @brief Type of a structure representing an ADC driver.
+ */
+typedef struct ADCDriver ADCDriver;
+
+/**
+ * @brief ADC notification callback type.
+ *
+ * @param[in] adcp pointer to the @p ADCDriver object triggering the
+ * callback
+ * @param[in] buffer pointer to the most recent samples data
+ * @param[in] n number of buffer rows available starting from @p buffer
+ */
+typedef void (*adccallback_t)(ADCDriver *adcp, adcsample_t *buffer, size_t n);
+
+/**
+ * @brief ADC error callback type.
+ *
+ * @param[in] adcp pointer to the @p ADCDriver object triggering the
+ * callback
+ * @param[in] err ADC error code
+ */
+typedef void (*adcerrorcallback_t)(ADCDriver *adcp, adcerror_t err);
+
+/**
+ * @brief Conversion group configuration structure.
+ * @details This implementation-dependent structure describes a conversion
+ * operation.
+ * @note The use of this configuration structure requires knowledge of
+ * STM32 ADC cell registers interface, please refer to the STM32
+ * reference manual for details.
+ */
+typedef struct {
+ /**
+ * @brief Enables the circular buffer mode for the group.
+ */
+ bool_t circular;
+ /**
+ * @brief Number of the analog channels belonging to the conversion group.
+ */
+ adc_channels_num_t num_channels;
+ /**
+ * @brief Callback function associated to the group or @p NULL.
+ */
+ adccallback_t end_cb;
+ /**
+ * @brief Error callback or @p NULL.
+ */
+ adcerrorcallback_t error_cb;
+ /* End of the mandatory fields.*/
+ /**
+ * @brief ADC CFGR register initialization data.
+ * @note The bits DMAEN, DMACFG, OVRMOD, CONT are enforced internally
+ * to the driver, keep them to zero.
+ */
+ uint32_t cfgr;
+ /**
+ * @brief ADC TR1 register initialization data.
+ */
+ uint32_t tr1;
+ /**
+ * @brief ADC CCR register initialization data.
+ * @note The bits CKMODE, MDMA, DMACFG are enforced internally to the
+ * driver, keep them to zero.
+ */
+ uint32_t ccr;
+ /**
+ * @brief ADC SMPRx registers initialization data.
+ */
+ uint32_t smpr[2];
+ /**
+ * @brief ADC SQRx register initialization data.
+ */
+ uint32_t sqr[4];
+#if STM32_ADC_DUAL_MODE || defined(__DOXYGEN__)
+ /**
+ * @brief Slave ADC SMPRx registers initialization data.
+ */
+ uint32_t ssmpr[2];
+ /**
+ * @brief Slave ADC SQRx register initialization data.
+ */
+ uint32_t ssqr[4];
+#endif /* STM32_ADC_DUAL_MODE */
+} ADCConversionGroup;
+
+/**
+ * @brief Driver configuration structure.
+ * @note It could be empty on some architectures.
+ */
+typedef struct {
+ uint32_t dummy;
+} ADCConfig;
+
+/**
+ * @brief Structure representing an ADC driver.
+ */
+struct ADCDriver {
+ /**
+ * @brief Driver state.
+ */
+ adcstate_t state;
+ /**
+ * @brief Current configuration data.
+ */
+ const ADCConfig *config;
+ /**
+ * @brief Current samples buffer pointer or @p NULL.
+ */
+ adcsample_t *samples;
+ /**
+ * @brief Current samples buffer depth or @p 0.
+ */
+ size_t depth;
+ /**
+ * @brief Current conversion group pointer or @p NULL.
+ */
+ const ADCConversionGroup *grpp;
+#if ADC_USE_WAIT || defined(__DOXYGEN__)
+ /**
+ * @brief Waiting thread.
+ */
+ thread_reference_t thread;
+#endif
+#if ADC_USE_MUTUAL_EXCLUSION || defined(__DOXYGEN__)
+ /**
+ * @brief Mutex protecting the peripheral.
+ */
+ mutex_t mutex;
+#endif /* ADC_USE_MUTUAL_EXCLUSION */
+#if defined(ADC_DRIVER_EXT_FIELDS)
+ ADC_DRIVER_EXT_FIELDS
+#endif
+ /* End of the mandatory fields.*/
+ /**
+ * @brief Pointer to the common ADCx_y registers block.
+ */
+ ADC_Common_TypeDef *adcc;
+ /**
+ * @brief Pointer to the master ADCx registers block.
+ */
+ ADC_TypeDef *adcm;
+#if STM32_ADC_DUAL_MODE || defined(__DOXYGEN__)
+ /**
+ * @brief Pointer to the slave ADCx registers block.
+ */
+ ADC_TypeDef *adcs;
+#endif /* STM32_ADC_DUAL_MODE */
+ /**
+ * @brief Pointer to associated DMA channel.
+ */
+ const stm32_dma_stream_t *dmastp;
+ /**
+ * @brief DMA mode bit mask.
+ */
+ uint32_t dmamode;
+};
+
+/*===========================================================================*/
+/* Driver macros. */
+/*===========================================================================*/
+
+/**
+ * @name Threashold register initializer
+ * @{
+ */
+#define ADC_TR(low, high) (((uint32_t)(high) << 16) | (uint32_t)(low))
+/** @} */
+
+/**
+ * @name Sequences building helper macros
+ * @{
+ */
+/**
+ * @brief Number of channels in a conversion sequence.
+ */
+#define ADC_SQR1_NUM_CH(n) (((n) - 1) << 0)
+
+#define ADC_SQR1_SQ1_N(n) ((n) << 6) /**< @brief 1st channel in seq. */
+#define ADC_SQR1_SQ2_N(n) ((n) << 12) /**< @brief 2nd channel in seq. */
+#define ADC_SQR1_SQ3_N(n) ((n) << 18) /**< @brief 3rd channel in seq. */
+#define ADC_SQR1_SQ4_N(n) ((n) << 24) /**< @brief 4th channel in seq. */
+
+#define ADC_SQR2_SQ5_N(n) ((n) << 0) /**< @brief 5th channel in seq. */
+#define ADC_SQR2_SQ6_N(n) ((n) << 6) /**< @brief 6th channel in seq. */
+#define ADC_SQR2_SQ7_N(n) ((n) << 12) /**< @brief 7th channel in seq. */
+#define ADC_SQR2_SQ8_N(n) ((n) << 18) /**< @brief 8th channel in seq. */
+#define ADC_SQR2_SQ9_N(n) ((n) << 24) /**< @brief 9th channel in seq. */
+
+#define ADC_SQR3_SQ10_N(n) ((n) << 0) /**< @brief 10th channel in seq.*/
+#define ADC_SQR3_SQ11_N(n) ((n) << 6) /**< @brief 11th channel in seq.*/
+#define ADC_SQR3_SQ12_N(n) ((n) << 12) /**< @brief 12th channel in seq.*/
+#define ADC_SQR3_SQ13_N(n) ((n) << 18) /**< @brief 13th channel in seq.*/
+#define ADC_SQR3_SQ14_N(n) ((n) << 24) /**< @brief 14th channel in seq.*/
+
+#define ADC_SQR4_SQ15_N(n) ((n) << 0) /**< @brief 15th channel in seq.*/
+#define ADC_SQR4_SQ16_N(n) ((n) << 6) /**< @brief 16th channel in seq.*/
+/** @} */
+
+/**
+ * @name Sampling rate settings helper macros
+ * @{
+ */
+#define ADC_SMPR1_SMP_AN1(n) ((n) << 3) /**< @brief AN1 sampling time. */
+#define ADC_SMPR1_SMP_AN2(n) ((n) << 6) /**< @brief AN2 sampling time. */
+#define ADC_SMPR1_SMP_AN3(n) ((n) << 9) /**< @brief AN3 sampling time. */
+#define ADC_SMPR1_SMP_AN4(n) ((n) << 12) /**< @brief AN4 sampling time. */
+#define ADC_SMPR1_SMP_AN5(n) ((n) << 15) /**< @brief AN5 sampling time. */
+#define ADC_SMPR1_SMP_AN6(n) ((n) << 18) /**< @brief AN6 sampling time. */
+#define ADC_SMPR1_SMP_AN7(n) ((n) << 21) /**< @brief AN7 sampling time. */
+#define ADC_SMPR1_SMP_AN8(n) ((n) << 24) /**< @brief AN8 sampling time. */
+#define ADC_SMPR1_SMP_AN9(n) ((n) << 27) /**< @brief AN9 sampling time. */
+
+#define ADC_SMPR2_SMP_AN10(n) ((n) << 0) /**< @brief AN10 sampling time. */
+#define ADC_SMPR2_SMP_AN11(n) ((n) << 3) /**< @brief AN11 sampling time. */
+#define ADC_SMPR2_SMP_AN12(n) ((n) << 6) /**< @brief AN12 sampling time. */
+#define ADC_SMPR2_SMP_AN13(n) ((n) << 9) /**< @brief AN13 sampling time. */
+#define ADC_SMPR2_SMP_AN14(n) ((n) << 12) /**< @brief AN14 sampling time. */
+#define ADC_SMPR2_SMP_AN15(n) ((n) << 15) /**< @brief AN15 sampling time. */
+#define ADC_SMPR2_SMP_AN16(n) ((n) << 18) /**< @brief AN16 sampling time. */
+#define ADC_SMPR2_SMP_AN17(n) ((n) << 21) /**< @brief AN17 sampling time. */
+#define ADC_SMPR2_SMP_AN18(n) ((n) << 24) /**< @brief AN18 sampling time. */
+/** @} */
+
+/*===========================================================================*/
+/* External declarations. */
+/*===========================================================================*/
+
+#if STM32_ADC_USE_ADC1 && !defined(__DOXYGEN__)
+extern ADCDriver ADCD1;
+#endif
+
+#if STM32_ADC_USE_ADC3 && !defined(__DOXYGEN__)
+extern ADCDriver ADCD3;
+#endif
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+ void adc_lld_init(void);
+ void adc_lld_start(ADCDriver *adcp);
+ void adc_lld_stop(ADCDriver *adcp);
+ void adc_lld_start_conversion(ADCDriver *adcp);
+ void adc_lld_stop_conversion(ADCDriver *adcp);
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* HAL_USE_ADC */
+
+#endif /* _ADC_LLD_H_ */
+
+/** @} */
diff --git a/os/hal/platforms/STM32F30x/ext_lld_isr.c b/os/hal/platforms/STM32F30x/ext_lld_isr.c new file mode 100644 index 000000000..c9802713e --- /dev/null +++ b/os/hal/platforms/STM32F30x/ext_lld_isr.c @@ -0,0 +1,418 @@ +/*
+ ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+/**
+ * @file STM32F30x/ext_lld_isr.c
+ * @brief STM32F30x EXT subsystem low level driver ISR code.
+ *
+ * @addtogroup EXT
+ * @{
+ */
+
+#include "ch.h"
+#include "hal.h"
+
+#if HAL_USE_EXT || defined(__DOXYGEN__)
+
+#include "ext_lld_isr.h"
+
+/*===========================================================================*/
+/* Driver local definitions. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver exported variables. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver local variables. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver local functions. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver interrupt handlers. */
+/*===========================================================================*/
+
+#if !defined(STM32_DISABLE_EXTI0_HANDLER)
+/**
+ * @brief EXTI[0] interrupt handler.
+ *
+ * @isr
+ */
+CH_IRQ_HANDLER(Vector58) {
+
+ CH_IRQ_PROLOGUE();
+
+ EXTI->PR = (1 << 0);
+ EXTD1.config->channels[0].cb(&EXTD1, 0);
+
+ CH_IRQ_EPILOGUE();
+}
+#endif
+
+#if !defined(STM32_DISABLE_EXTI1_HANDLER)
+/**
+ * @brief EXTI[1] interrupt handler.
+ *
+ * @isr
+ */
+CH_IRQ_HANDLER(Vector5C) {
+
+ CH_IRQ_PROLOGUE();
+
+ EXTI->PR = (1 << 1);
+ EXTD1.config->channels[1].cb(&EXTD1, 1);
+
+ CH_IRQ_EPILOGUE();
+}
+#endif
+
+#if !defined(STM32_DISABLE_EXTI2_HANDLER)
+/**
+ * @brief EXTI[2] interrupt handler.
+ *
+ * @isr
+ */
+CH_IRQ_HANDLER(Vector60) {
+
+ CH_IRQ_PROLOGUE();
+
+ EXTI->PR = (1 << 2);
+ EXTD1.config->channels[2].cb(&EXTD1, 2);
+
+ CH_IRQ_EPILOGUE();
+}
+#endif
+
+#if !defined(STM32_DISABLE_EXTI3_HANDLER)
+/**
+ * @brief EXTI[3] interrupt handler.
+ *
+ * @isr
+ */
+CH_IRQ_HANDLER(Vector64) {
+
+ CH_IRQ_PROLOGUE();
+
+ EXTI->PR = (1 << 3);
+ EXTD1.config->channels[3].cb(&EXTD1, 3);
+
+ CH_IRQ_EPILOGUE();
+}
+#endif
+
+#if !defined(STM32_DISABLE_EXTI4_HANDLER)
+/**
+ * @brief EXTI[4] interrupt handler.
+ *
+ * @isr
+ */
+CH_IRQ_HANDLER(Vector68) {
+
+ CH_IRQ_PROLOGUE();
+
+ EXTI->PR = (1 << 4);
+ EXTD1.config->channels[4].cb(&EXTD1, 4);
+
+ CH_IRQ_EPILOGUE();
+}
+#endif
+
+#if !defined(STM32_DISABLE_EXTI5_9_HANDLER)
+/**
+ * @brief EXTI[5]...EXTI[9] interrupt handler.
+ *
+ * @isr
+ */
+CH_IRQ_HANDLER(Vector9C) {
+ uint32_t pr;
+
+ CH_IRQ_PROLOGUE();
+
+ pr = EXTI->PR & ((1 << 5) | (1 << 6) | (1 << 7) | (1 << 8) | (1 << 9));
+ EXTI->PR = pr;
+ if (pr & (1 << 5))
+ EXTD1.config->channels[5].cb(&EXTD1, 5);
+ if (pr & (1 << 6))
+ EXTD1.config->channels[6].cb(&EXTD1, 6);
+ if (pr & (1 << 7))
+ EXTD1.config->channels[7].cb(&EXTD1, 7);
+ if (pr & (1 << 8))
+ EXTD1.config->channels[8].cb(&EXTD1, 8);
+ if (pr & (1 << 9))
+ EXTD1.config->channels[9].cb(&EXTD1, 9);
+
+ CH_IRQ_EPILOGUE();
+}
+#endif
+
+#if !defined(STM32_DISABLE_EXTI10_15_HANDLER)
+/**
+ * @brief EXTI[10]...EXTI[15] interrupt handler.
+ *
+ * @isr
+ */
+CH_IRQ_HANDLER(VectorE0) {
+ uint32_t pr;
+
+ CH_IRQ_PROLOGUE();
+
+ pr = EXTI->PR & ((1 << 10) | (1 << 11) | (1 << 12) | (1 << 13) | (1 << 14) |
+ (1 << 15));
+ EXTI->PR = pr;
+ if (pr & (1 << 10))
+ EXTD1.config->channels[10].cb(&EXTD1, 10);
+ if (pr & (1 << 11))
+ EXTD1.config->channels[11].cb(&EXTD1, 11);
+ if (pr & (1 << 12))
+ EXTD1.config->channels[12].cb(&EXTD1, 12);
+ if (pr & (1 << 13))
+ EXTD1.config->channels[13].cb(&EXTD1, 13);
+ if (pr & (1 << 14))
+ EXTD1.config->channels[14].cb(&EXTD1, 14);
+ if (pr & (1 << 15))
+ EXTD1.config->channels[15].cb(&EXTD1, 15);
+
+ CH_IRQ_EPILOGUE();
+}
+#endif
+
+#if !defined(STM32_DISABLE_EXTI16_HANDLER)
+/**
+ * @brief EXTI[16] interrupt handler (PVD).
+ *
+ * @isr
+ */
+CH_IRQ_HANDLER(Vector44) {
+
+ CH_IRQ_PROLOGUE();
+
+ EXTI->PR = (1 << 16);
+ EXTD1.config->channels[16].cb(&EXTD1, 16);
+
+ CH_IRQ_EPILOGUE();
+}
+#endif
+
+#if !defined(STM32_DISABLE_EXTI17_HANDLER)
+/**
+ * @brief EXTI[17] interrupt handler (RTC Alarm).
+ *
+ * @isr
+ */
+CH_IRQ_HANDLER(VectorE4) {
+
+ CH_IRQ_PROLOGUE();
+
+ EXTI->PR = (1 << 17);
+ EXTD1.config->channels[17].cb(&EXTD1, 17);
+
+ CH_IRQ_EPILOGUE();
+}
+#endif
+
+#if !defined(STM32_DISABLE_EXTI18_HANDLER)
+/**
+ * @brief EXTI[18] interrupt handler (USB Wakeup).
+ *
+ * @isr
+ */
+CH_IRQ_HANDLER(VectorE8) {
+
+ CH_IRQ_PROLOGUE();
+
+ EXTI->PR = (1 << 18);
+ EXTD1.config->channels[18].cb(&EXTD1, 18);
+
+ CH_IRQ_EPILOGUE();
+}
+#endif
+
+#if !defined(STM32_DISABLE_EXTI19_HANDLER)
+/**
+ * @brief EXTI[19] interrupt handler (Tamper TimeStamp).
+ *
+ * @isr
+ */
+CH_IRQ_HANDLER(Vector48) {
+
+ CH_IRQ_PROLOGUE();
+
+ EXTI->PR = (1 << 19);
+ EXTD1.config->channels[19].cb(&EXTD1, 19);
+
+ CH_IRQ_EPILOGUE();
+}
+#endif
+
+#if !defined(STM32_DISABLE_EXTI20_HANDLER)
+/**
+ * @brief EXTI[20] interrupt handler (RTC Wakeup).
+ *
+ * @isr
+ */
+CH_IRQ_HANDLER(Vector4C) {
+
+ CH_IRQ_PROLOGUE();
+
+ EXTI->PR = (1 << 20);
+ EXTD1.config->channels[20].cb(&EXTD1, 20);
+
+ CH_IRQ_EPILOGUE();
+}
+#endif
+
+#if !defined(STM32_DISABLE_EXTI21_22_29_HANDLER)
+/**
+ * @brief EXTI[21],EXTI[22],EXTI[29] interrupt handler (COMP1, COMP2, COMP3).
+ *
+ * @isr
+ */
+CH_IRQ_HANDLER(Vector140) {
+ uint32_t pr;
+
+ CH_IRQ_PROLOGUE();
+
+ pr = EXTI->PR & ((1 << 21) | (1 << 22) | (1 << 29));
+ EXTI->PR = pr;
+ if (pr & (1 << 21))
+ EXTD1.config->channels[21].cb(&EXTD1, 21);
+ if (pr & (1 << 22))
+ EXTD1.config->channels[22].cb(&EXTD1, 22);
+ if (pr & (1 << 29))
+ EXTD1.config->channels[29].cb(&EXTD1, 29);
+
+ CH_IRQ_EPILOGUE();
+}
+#endif
+
+#if !defined(STM32_DISABLE_EXTI30_32_HANDLER)
+/**
+ * @brief EXTI[30]...EXTI[32] interrupt handler (COMP4, COMP5, COMP6).
+ *
+ * @isr
+ */
+CH_IRQ_HANDLER(Vector144) {
+ uint32_t pr;
+
+ CH_IRQ_PROLOGUE();
+
+ pr = EXTI->PR & ((1 << 30) | (1 << 31));
+ EXTI->PR = pr;
+ if (pr & (1 << 30))
+ EXTD1.config->channels[30].cb(&EXTD1, 30);
+ if (pr & (1 << 31))
+ EXTD1.config->channels[31].cb(&EXTD1, 31);
+
+ pr = EXTI->PR2 & (1 << 0);
+ EXTI->PR2 = pr;
+ if (pr & (1 << 0))
+ EXTD1.config->channels[32].cb(&EXTD1, 32);
+
+ CH_IRQ_EPILOGUE();
+}
+#endif
+
+#if !defined(STM32_DISABLE_EXTI33_HANDLER)
+/**
+ * @brief EXTI[33] interrupt handler (COMP7).
+ *
+ * @isr
+ */
+CH_IRQ_HANDLER(RTC_WKUP_IRQHandler) {
+
+ CH_IRQ_PROLOGUE();
+
+ EXTI->PR2 = (1 << 1);
+ EXTD1.config->channels[33].cb(&EXTD1, 33);
+
+ CH_IRQ_EPILOGUE();
+}
+#endif
+
+/*===========================================================================*/
+/* Driver exported functions. */
+/*===========================================================================*/
+
+/**
+ * @brief Enables EXTI IRQ sources.
+ *
+ * @notapi
+ */
+void ext_lld_exti_irq_enable(void) {
+
+ nvicEnableVector(EXTI0_IRQn,
+ CORTEX_PRIORITY_MASK(STM32_EXT_EXTI0_IRQ_PRIORITY));
+ nvicEnableVector(EXTI1_IRQn,
+ CORTEX_PRIORITY_MASK(STM32_EXT_EXTI1_IRQ_PRIORITY));
+ nvicEnableVector(EXTI2_TS_IRQn,
+ CORTEX_PRIORITY_MASK(STM32_EXT_EXTI2_IRQ_PRIORITY));
+ nvicEnableVector(EXTI3_IRQn,
+ CORTEX_PRIORITY_MASK(STM32_EXT_EXTI3_IRQ_PRIORITY));
+ nvicEnableVector(EXTI4_IRQn,
+ CORTEX_PRIORITY_MASK(STM32_EXT_EXTI4_IRQ_PRIORITY));
+ nvicEnableVector(EXTI9_5_IRQn,
+ CORTEX_PRIORITY_MASK(STM32_EXT_EXTI5_9_IRQ_PRIORITY));
+ nvicEnableVector(EXTI15_10_IRQn,
+ CORTEX_PRIORITY_MASK(STM32_EXT_EXTI10_15_IRQ_PRIORITY));
+ nvicEnableVector(PVD_IRQn,
+ CORTEX_PRIORITY_MASK(STM32_EXT_EXTI16_IRQ_PRIORITY));
+ nvicEnableVector(RTC_Alarm_IRQn,
+ CORTEX_PRIORITY_MASK(STM32_EXT_EXTI17_IRQ_PRIORITY));
+ nvicEnableVector(USBWakeUp_IRQn,
+ CORTEX_PRIORITY_MASK(STM32_EXT_EXTI18_IRQ_PRIORITY));
+ nvicEnableVector(TAMPER_STAMP_IRQn,
+ CORTEX_PRIORITY_MASK(STM32_EXT_EXTI19_IRQ_PRIORITY));
+ nvicEnableVector(RTC_WKUP_IRQn,
+ CORTEX_PRIORITY_MASK(STM32_EXT_EXTI20_IRQ_PRIORITY));
+ nvicEnableVector(COMP1_2_3_IRQn,
+ CORTEX_PRIORITY_MASK(STM32_EXT_EXTI21_22_29_IRQ_PRIORITY));
+ nvicEnableVector(COMP4_5_6_IRQn,
+ CORTEX_PRIORITY_MASK(STM32_EXT_EXTI30_32_IRQ_PRIORITY));
+ nvicEnableVector(COMP7_IRQn,
+ CORTEX_PRIORITY_MASK(STM32_EXT_EXTI33_IRQ_PRIORITY));
+}
+
+/**
+ * @brief Disables EXTI IRQ sources.
+ *
+ * @notapi
+ */
+void ext_lld_exti_irq_disable(void) {
+
+ nvicDisableVector(EXTI0_IRQn);
+ nvicDisableVector(EXTI1_IRQn);
+ nvicDisableVector(EXTI2_TS_IRQn);
+ nvicDisableVector(EXTI3_IRQn);
+ nvicDisableVector(EXTI4_IRQn);
+ nvicDisableVector(EXTI9_5_IRQn);
+ nvicDisableVector(EXTI15_10_IRQn);
+ nvicDisableVector(PVD_IRQn);
+ nvicDisableVector(RTC_Alarm_IRQn);
+ nvicDisableVector(USBWakeUp_IRQn);
+ nvicDisableVector(TAMPER_STAMP_IRQn);
+ nvicDisableVector(RTC_WKUP_IRQn);
+ nvicDisableVector(COMP1_2_3_IRQn);
+ nvicDisableVector(COMP4_5_6_IRQn);
+ nvicDisableVector(COMP7_IRQn);
+}
+
+#endif /* HAL_USE_EXT */
+
+/** @} */
diff --git a/os/hal/platforms/STM32F30x/ext_lld_isr.h b/os/hal/platforms/STM32F30x/ext_lld_isr.h new file mode 100644 index 000000000..42f1e30fe --- /dev/null +++ b/os/hal/platforms/STM32F30x/ext_lld_isr.h @@ -0,0 +1,177 @@ +/*
+ ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+/**
+ * @file STM32F30x/ext_lld_isr.h
+ * @brief STM32F30x EXT subsystem low level driver ISR header.
+ *
+ * @addtogroup EXT
+ * @{
+ */
+
+#ifndef _EXT_LLD_ISR_H_
+#define _EXT_LLD_ISR_H_
+
+#if HAL_USE_EXT || defined(__DOXYGEN__)
+
+/*===========================================================================*/
+/* Driver constants. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver pre-compile time settings. */
+/*===========================================================================*/
+
+/**
+ * @name Configuration options
+ * @{
+ */
+/**
+ * @brief EXTI0 interrupt priority level setting.
+ */
+#if !defined(STM32_EXT_EXTI0_IRQ_PRIORITY) || defined(__DOXYGEN__)
+#define STM32_EXT_EXTI0_IRQ_PRIORITY 6
+#endif
+
+/**
+ * @brief EXTI1 interrupt priority level setting.
+ */
+#if !defined(STM32_EXT_EXTI1_IRQ_PRIORITY) || defined(__DOXYGEN__)
+#define STM32_EXT_EXTI1_IRQ_PRIORITY 6
+#endif
+
+/**
+ * @brief EXTI2 interrupt priority level setting.
+ */
+#if !defined(STM32_EXT_EXTI2_IRQ_PRIORITY) || defined(__DOXYGEN__)
+#define STM32_EXT_EXTI2_IRQ_PRIORITY 6
+#endif
+
+/**
+ * @brief EXTI3 interrupt priority level setting.
+ */
+#if !defined(STM32_EXT_EXTI3_IRQ_PRIORITY) || defined(__DOXYGEN__)
+#define STM32_EXT_EXTI3_IRQ_PRIORITY 6
+#endif
+
+/**
+ * @brief EXTI4 interrupt priority level setting.
+ */
+#if !defined(STM32_EXT_EXTI4_IRQ_PRIORITY) || defined(__DOXYGEN__)
+#define STM32_EXT_EXTI4_IRQ_PRIORITY 6
+#endif
+
+/**
+ * @brief EXTI5..9 interrupt priority level setting.
+ */
+#if !defined(STM32_EXT_EXTI5_9_IRQ_PRIORITY) || defined(__DOXYGEN__)
+#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6
+#endif
+
+/**
+ * @brief EXTI10..15 interrupt priority level setting.
+ */
+#if !defined(STM32_EXT_EXTI10_15_IRQ_PRIORITY) || defined(__DOXYGEN__)
+#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6
+#endif
+
+/**
+ * @brief EXTI16 interrupt priority level setting.
+ */
+#if !defined(STM32_EXT_EXTI16_IRQ_PRIORITY) || defined(__DOXYGEN__)
+#define STM32_EXT_EXTI16_IRQ_PRIORITY 6
+#endif
+
+/**
+ * @brief EXTI17 interrupt priority level setting.
+ */
+#if !defined(STM32_EXT_EXTI17_IRQ_PRIORITY) || defined(__DOXYGEN__)
+#define STM32_EXT_EXTI17_IRQ_PRIORITY 6
+#endif
+
+/**
+ * @brief EXTI18 interrupt priority level setting.
+ */
+#if !defined(STM32_EXT_EXTI18_IRQ_PRIORITY) || defined(__DOXYGEN__)
+#define STM32_EXT_EXTI18_IRQ_PRIORITY 6
+#endif
+
+/**
+ * @brief EXTI19 interrupt priority level setting.
+ */
+#if !defined(STM32_EXT_EXTI19_IRQ_PRIORITY) || defined(__DOXYGEN__)
+#define STM32_EXT_EXTI19_IRQ_PRIORITY 6
+#endif
+
+/**
+ * @brief EXTI20 interrupt priority level setting.
+ */
+#if !defined(STM32_EXT_EXTI20_IRQ_PRIORITY) || defined(__DOXYGEN__)
+#define STM32_EXT_EXTI20_IRQ_PRIORITY 6
+#endif
+
+/**
+ * @brief EXTI21,22,29 interrupt priority level setting.
+ */
+#if !defined(STM32_EXT_EXTI21_22_29_IRQ_PRIORITY) || defined(__DOXYGEN__)
+#define STM32_EXT_EXTI21_22_29_IRQ_PRIORITY 6
+#endif
+
+/**
+ * @brief EXTI30..32 interrupt priority level setting.
+ */
+#if !defined(STM32_EXT_EXTI30_32_IRQ_PRIORITY) || defined(__DOXYGEN__)
+#define STM32_EXT_EXTI30_32_IRQ_PRIORITY 6
+#endif
+
+/**
+ * @brief EXTI33 interrupt priority level setting.
+ */
+#if !defined(STM32_EXT_EXTI33_IRQ_PRIORITY) || defined(__DOXYGEN__)
+#define STM32_EXT_EXTI33_IRQ_PRIORITY 6
+#endif
+/** @} */
+
+/*===========================================================================*/
+/* Derived constants and error checks. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver data structures and types. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver macros. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* External declarations. */
+/*===========================================================================*/
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+ void ext_lld_exti_irq_enable(void);
+ void ext_lld_exti_irq_disable(void);
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* HAL_USE_EXT */
+
+#endif /* _EXT_LLD_ISR_H_ */
+
+/** @} */
diff --git a/os/hal/platforms/STM32F30x/hal_lld.c b/os/hal/platforms/STM32F30x/hal_lld.c new file mode 100644 index 000000000..46ca8a7f9 --- /dev/null +++ b/os/hal/platforms/STM32F30x/hal_lld.c @@ -0,0 +1,208 @@ +/*
+ ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+/**
+ * @file STM32F30x/hal_lld.c
+ * @brief STM32F30x HAL subsystem low level driver source.
+ *
+ * @addtogroup HAL
+ * @{
+ */
+
+#include "hal.h"
+
+/*===========================================================================*/
+/* Driver local definitions. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver exported variables. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver local variables and types. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver local functions. */
+/*===========================================================================*/
+
+/**
+ * @brief Initializes the backup domain.
+ * @note WARNING! Changing clock source impossible without resetting
+ * of the whole BKP domain.
+ */
+static void hal_lld_backup_domain_init(void) {
+
+ /* Backup domain access enabled and left open.*/
+ PWR->CR |= PWR_CR_DBP;
+
+ /* Reset BKP domain if different clock source selected.*/
+ if ((RCC->BDCR & STM32_RTCSEL_MASK) != STM32_RTCSEL){
+ /* Backup domain reset.*/
+ RCC->BDCR = RCC_BDCR_BDRST;
+ RCC->BDCR = 0;
+ }
+
+ /* If enabled then the LSE is started.*/
+#if STM32_LSE_ENABLED
+#if defined(STM32_LSE_BYPASS)
+ /* LSE Bypass.*/
+ RCC->BDCR = STM32_LSEDRV | RCC_BDCR_LSEON | RCC_BDCR_LSEBYP;
+#else
+ /* No LSE Bypass.*/
+ RCC->BDCR = STM32_LSEDRV | RCC_BDCR_LSEON;
+#endif
+ while ((RCC->BDCR & RCC_BDCR_LSERDY) == 0)
+ ; /* Waits until LSE is stable. */
+#endif
+
+#if STM32_RTCSEL != STM32_RTCSEL_NOCLOCK
+ /* If the backup domain hasn't been initialized yet then proceed with
+ initialization.*/
+ if ((RCC->BDCR & RCC_BDCR_RTCEN) == 0) {
+ /* Selects clock source.*/
+ RCC->BDCR |= STM32_RTCSEL;
+
+ /* RTC clock enabled.*/
+ RCC->BDCR |= RCC_BDCR_RTCEN;
+ }
+#endif /* STM32_RTCSEL != STM32_RTCSEL_NOCLOCK */
+}
+
+/*===========================================================================*/
+/* Driver interrupt handlers. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver exported functions. */
+/*===========================================================================*/
+
+/**
+ * @brief Low level HAL driver initialization.
+ *
+ * @notapi
+ */
+void hal_lld_init(void) {
+
+ /* Reset of all peripherals.*/
+ rccResetAPB1(0xFFFFFFFF);
+ rccResetAPB2(0xFFFFFFFF);
+
+ /* SysTick initialization using the system clock.*/
+// SysTick->LOAD = STM32_HCLK / CH_FREQUENCY - 1;
+// SysTick->VAL = 0;
+// SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk |
+// SysTick_CTRL_ENABLE_Msk |
+// SysTick_CTRL_TICKINT_Msk;
+
+ /* DWT cycle counter enable.*/
+// SCS_DEMCR |= SCS_DEMCR_TRCENA;
+// DWT_CTRL |= DWT_CTRL_CYCCNTENA;
+
+ /* PWR clock enabled.*/
+ rccEnablePWRInterface(FALSE);
+
+ /* Initializes the backup domain.*/
+ hal_lld_backup_domain_init();
+
+#if defined(STM32_DMA_REQUIRED)
+ dmaInit();
+#endif
+
+ /* Programmable voltage detector enable.*/
+#if STM32_PVD_ENABLE
+ PWR->CR |= PWR_CR_PVDE | (STM32_PLS & STM32_PLS_MASK);
+#endif /* STM32_PVD_ENABLE */
+
+ /* SYSCFG clock enabled here because it is a multi-functional unit shared
+ among multiple drivers.*/
+ rccEnableAPB2(RCC_APB2ENR_SYSCFGEN, TRUE);
+
+ /* USB IRQ relocated to not conflict with CAN.*/
+ SYSCFG->CFGR1 |= SYSCFG_CFGR1_USB_IT_RMP;
+}
+
+/**
+ * @brief STM32 clocks and PLL initialization.
+ * @note All the involved constants come from the file @p board.h.
+ * @note This function should be invoked just after the system reset.
+ *
+ * @special
+ */
+void stm32_clock_init(void) {
+
+#if !STM32_NO_INIT
+ /* HSI setup, it enforces the reset situation in order to handle possible
+ problems with JTAG probes and re-initializations.*/
+ RCC->CR |= RCC_CR_HSION; /* Make sure HSI is ON. */
+ while (!(RCC->CR & RCC_CR_HSIRDY))
+ ; /* Wait until HSI is stable. */
+ RCC->CR &= RCC_CR_HSITRIM | RCC_CR_HSION; /* CR Reset value. */
+ RCC->CFGR = 0; /* CFGR reset value. */
+ while ((RCC->CFGR & RCC_CFGR_SWS) != RCC_CFGR_SWS_HSI)
+ ; /* Waits until HSI is selected. */
+
+#if STM32_HSE_ENABLED
+ /* HSE activation.*/
+#if defined(STM32_HSE_BYPASS)
+ /* HSE Bypass.*/
+ RCC->CR |= RCC_CR_HSEON | RCC_CR_HSEBYP;
+#else
+ /* No HSE Bypass.*/
+ RCC->CR |= RCC_CR_HSEON;
+#endif
+ while (!(RCC->CR & RCC_CR_HSERDY))
+ ; /* Waits until HSE is stable. */
+#endif
+
+#if STM32_LSI_ENABLED
+ /* LSI activation.*/
+ RCC->CSR |= RCC_CSR_LSION;
+ while ((RCC->CSR & RCC_CSR_LSIRDY) == 0)
+ ; /* Waits until LSI is stable. */
+#endif
+
+ /* Clock settings.*/
+ RCC->CFGR = STM32_MCOSEL | STM32_USBPRE | STM32_PLLMUL |
+ STM32_PLLSRC | STM32_PPRE1 | STM32_PPRE2 |
+ STM32_HPRE;
+ RCC->CFGR2 = STM32_ADC34PRES | STM32_ADC12PRES | STM32_PREDIV;
+ RCC->CFGR3 = STM32_UART5SW | STM32_UART4SW | STM32_USART3SW |
+ STM32_USART2SW | STM32_TIM8SW | STM32_TIM1SW |
+ STM32_I2C2SW | STM32_I2C1SW | STM32_USART1SW;
+
+#if STM32_ACTIVATE_PLL
+ /* PLL activation.*/
+ RCC->CR |= RCC_CR_PLLON;
+ while (!(RCC->CR & RCC_CR_PLLRDY))
+ ; /* Waits until PLL is stable. */
+#endif
+
+ /* Flash setup and final clock selection. */
+ FLASH->ACR = STM32_FLASHBITS;
+
+ /* Switching to the configured clock source if it is different from HSI.*/
+#if (STM32_SW != STM32_SW_HSI)
+ /* Switches clock source.*/
+ RCC->CFGR |= STM32_SW;
+ while ((RCC->CFGR & RCC_CFGR_SWS) != (STM32_SW << 2))
+ ; /* Waits selection complete. */
+#endif
+#endif /* !STM32_NO_INIT */
+}
+
+/** @} */
diff --git a/os/hal/platforms/STM32F30x/hal_lld.h b/os/hal/platforms/STM32F30x/hal_lld.h new file mode 100644 index 000000000..83174e930 --- /dev/null +++ b/os/hal/platforms/STM32F30x/hal_lld.h @@ -0,0 +1,1105 @@ +/*
+ ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+/**
+ * @file STM32F30x/hal_lld.h
+ * @brief STM32F30x HAL subsystem low level driver header.
+ * @pre This module requires the following macros to be defined in the
+ * @p board.h file:
+ * - STM32_LSECLK.
+ * - STM32_LSEDRV.
+ * - STM32_LSE_BYPASS (optionally).
+ * - STM32_HSECLK.
+ * - STM32_HSE_BYPASS (optionally).
+ * .
+ * One of the following macros must also be defined:
+ * - STM32F30X for Analog & DSP devices.
+ * .
+ *
+ * @addtogroup HAL
+ * @{
+ */
+
+#ifndef _HAL_LLD_H_
+#define _HAL_LLD_H_
+
+#include "stm32.h"
+#include "stm32_registry.h"
+
+/*===========================================================================*/
+/* Driver constants. */
+/*===========================================================================*/
+
+/**
+ * @brief Defines the support for realtime counters in the HAL.
+ */
+#define HAL_IMPLEMENTS_COUNTERS TRUE
+
+/**
+ * @name Platform identification
+ * @{
+ */
+#define PLATFORM_NAME "STM32F30x Analog & DSP"
+/** @} */
+
+/**
+ * @name Absolute Maximum Ratings
+ * @{
+ */
+/**
+ * @brief Maximum system clock frequency.
+ */
+#define STM32_SYSCLK_MAX 72000000
+
+/**
+ * @brief Maximum HSE clock frequency.
+ */
+#define STM32_HSECLK_MAX 32000000
+
+/**
+ * @brief Minimum HSE clock frequency.
+ */
+#define STM32_HSECLK_MIN 1000000
+
+/**
+ * @brief Maximum LSE clock frequency.
+ */
+#define STM32_LSECLK_MAX 1000000
+
+/**
+ * @brief Minimum LSE clock frequency.
+ */
+#define STM32_LSECLK_MIN 32768
+
+/**
+ * @brief Maximum PLLs input clock frequency.
+ */
+#define STM32_PLLIN_MAX 24000000
+
+/**
+ * @brief Minimum PLLs input clock frequency.
+ */
+#define STM32_PLLIN_MIN 1000000
+
+/**
+ * @brief Maximum PLL output clock frequency.
+ */
+#define STM32_PLLOUT_MAX 72000000
+
+/**
+ * @brief Maximum PLL output clock frequency.
+ */
+#define STM32_PLLOUT_MIN 16000000
+
+/**
+ * @brief Maximum APB1 clock frequency.
+ */
+#define STM32_PCLK1_MAX 36000000
+
+/**
+ * @brief Maximum APB2 clock frequency.
+ */
+#define STM32_PCLK2_MAX 72000000
+
+/**
+ * @brief Maximum ADC clock frequency.
+ */
+#define STM32_ADCCLK_MAX 72000000
+/** @} */
+
+/**
+ * @name Internal clock sources
+ * @{
+ */
+#define STM32_HSICLK 8000000 /**< High speed internal clock. */
+#define STM32_LSICLK 40000 /**< Low speed internal clock. */
+/** @} */
+
+/**
+ * @name PWR_CR register bits definitions
+ * @{
+ */
+#define STM32_PLS_MASK (7 << 5) /**< PLS bits mask. */
+#define STM32_PLS_LEV0 (0 << 5) /**< PVD level 0. */
+#define STM32_PLS_LEV1 (1 << 5) /**< PVD level 1. */
+#define STM32_PLS_LEV2 (2 << 5) /**< PVD level 2. */
+#define STM32_PLS_LEV3 (3 << 5) /**< PVD level 3. */
+#define STM32_PLS_LEV4 (4 << 5) /**< PVD level 4. */
+#define STM32_PLS_LEV5 (5 << 5) /**< PVD level 5. */
+#define STM32_PLS_LEV6 (6 << 5) /**< PVD level 6. */
+#define STM32_PLS_LEV7 (7 << 5) /**< PVD level 7. */
+/** @} */
+
+/**
+ * @name RCC_CFGR register bits definitions
+ * @{
+ */
+#define STM32_SW_HSI (0 << 0) /**< SYSCLK source is HSI. */
+#define STM32_SW_HSE (1 << 0) /**< SYSCLK source is HSE. */
+#define STM32_SW_PLL (2 << 0) /**< SYSCLK source is PLL. */
+
+#define STM32_HPRE_DIV1 (0 << 4) /**< SYSCLK divided by 1. */
+#define STM32_HPRE_DIV2 (8 << 4) /**< SYSCLK divided by 2. */
+#define STM32_HPRE_DIV4 (9 << 4) /**< SYSCLK divided by 4. */
+#define STM32_HPRE_DIV8 (10 << 4) /**< SYSCLK divided by 8. */
+#define STM32_HPRE_DIV16 (11 << 4) /**< SYSCLK divided by 16. */
+#define STM32_HPRE_DIV64 (12 << 4) /**< SYSCLK divided by 64. */
+#define STM32_HPRE_DIV128 (13 << 4) /**< SYSCLK divided by 128. */
+#define STM32_HPRE_DIV256 (14 << 4) /**< SYSCLK divided by 256. */
+#define STM32_HPRE_DIV512 (15 << 4) /**< SYSCLK divided by 512. */
+
+#define STM32_PPRE1_DIV1 (0 << 8) /**< HCLK divided by 1. */
+#define STM32_PPRE1_DIV2 (4 << 8) /**< HCLK divided by 2. */
+#define STM32_PPRE1_DIV4 (5 << 8) /**< HCLK divided by 4. */
+#define STM32_PPRE1_DIV8 (6 << 8) /**< HCLK divided by 8. */
+#define STM32_PPRE1_DIV16 (7 << 8) /**< HCLK divided by 16. */
+
+#define STM32_PPRE2_DIV1 (0 << 11) /**< HCLK divided by 1. */
+#define STM32_PPRE2_DIV2 (4 << 11) /**< HCLK divided by 2. */
+#define STM32_PPRE2_DIV4 (5 << 11) /**< HCLK divided by 4. */
+#define STM32_PPRE2_DIV8 (6 << 11) /**< HCLK divided by 8. */
+#define STM32_PPRE2_DIV16 (7 << 11) /**< HCLK divided by 16. */
+
+#define STM32_PLLSRC_HSI (0 << 16) /**< PLL clock source is HSI/2. */
+#define STM32_PLLSRC_HSE (1 << 16) /**< PLL clock source is
+ HSE/PREDIV. */
+
+#define STM32_USBPRE_DIV1P5 (0 << 22) /**< USB clock is PLLCLK/1.5. */
+#define STM32_USBPRE_DIV1 (1 << 22) /**< USB clock is PLLCLK/1. */
+
+#define STM32_MCOSEL_NOCLOCK (0 << 24) /**< No clock on MCO pin. */
+#define STM32_MCOSEL_LSI (2 << 24) /**< LSI clock on MCO pin. */
+#define STM32_MCOSEL_LSE (3 << 24) /**< LSE clock on MCO pin. */
+#define STM32_MCOSEL_SYSCLK (4 << 24) /**< SYSCLK on MCO pin. */
+#define STM32_MCOSEL_HSI (5 << 24) /**< HSI clock on MCO pin. */
+#define STM32_MCOSEL_HSE (6 << 24) /**< HSE clock on MCO pin. */
+#define STM32_MCOSEL_PLLDIV2 (7 << 24) /**< PLL/2 clock on MCO pin. */
+/** @} */
+
+/**
+ * @name RCC_BDCR register bits definitions
+ * @{
+ */
+#define STM32_RTCSEL_MASK (3 << 8) /**< RTC clock source mask. */
+#define STM32_RTCSEL_NOCLOCK (0 << 8) /**< No clock. */
+#define STM32_RTCSEL_LSE (1 << 8) /**< LSE used as RTC clock. */
+#define STM32_RTCSEL_LSI (2 << 8) /**< LSI used as RTC clock. */
+#define STM32_RTCSEL_HSEDIV (3 << 8) /**< HSE divided by 32 used as
+ RTC clock. */
+/** @} */
+
+/**
+ * @name RCC_CFGR2 register bits definitions
+ * @{
+ */
+#define STM32_PREDIV_MASK (15 << 0) /**< PREDIV divisor mask. */
+#define STM32_ADC12PRES_MASK (31 << 4) /**< ADC12 clock source mask. */
+#define STM32_ADC12PRES_NOCLOCK (0 << 4) /**< ADC12 clock is disabled. */
+#define STM32_ADC12PRES_DIV1 (16 << 4) /**< ADC12 clock is PLL/1. */
+#define STM32_ADC12PRES_DIV2 (17 << 4) /**< ADC12 clock is PLL/2. */
+#define STM32_ADC12PRES_DIV4 (18 << 4) /**< ADC12 clock is PLL/4. */
+#define STM32_ADC12PRES_DIV6 (19 << 4) /**< ADC12 clock is PLL/6. */
+#define STM32_ADC12PRES_DIV8 (20 << 4) /**< ADC12 clock is PLL/8. */
+#define STM32_ADC12PRES_DIV10 (21 << 4) /**< ADC12 clock is PLL/10. */
+#define STM32_ADC12PRES_DIV12 (22 << 4) /**< ADC12 clock is PLL/12. */
+#define STM32_ADC12PRES_DIV16 (23 << 4) /**< ADC12 clock is PLL/16. */
+#define STM32_ADC12PRES_DIV32 (24 << 4) /**< ADC12 clock is PLL/32. */
+#define STM32_ADC12PRES_DIV64 (25 << 4) /**< ADC12 clock is PLL/64. */
+#define STM32_ADC12PRES_DIV128 (26 << 4) /**< ADC12 clock is PLL/128. */
+#define STM32_ADC12PRES_DIV256 (27 << 4) /**< ADC12 clock is PLL/256. */
+#define STM32_ADC34PRES_MASK (31 << 4) /**< ADC34 clock source mask. */
+#define STM32_ADC34PRES_NOCLOCK (0 << 4) /**< ADC34 clock is disabled. */
+#define STM32_ADC34PRES_DIV1 (16 << 4) /**< ADC34 clock is PLL/1. */
+#define STM32_ADC34PRES_DIV2 (17 << 4) /**< ADC34 clock is PLL/2. */
+#define STM32_ADC34PRES_DIV4 (18 << 4) /**< ADC34 clock is PLL/4. */
+#define STM32_ADC34PRES_DIV6 (19 << 4) /**< ADC34 clock is PLL/6. */
+#define STM32_ADC34PRES_DIV8 (20 << 4) /**< ADC34 clock is PLL/8. */
+#define STM32_ADC34PRES_DIV10 (21 << 4) /**< ADC34 clock is PLL/10. */
+#define STM32_ADC34PRES_DIV12 (22 << 4) /**< ADC34 clock is PLL/12. */
+#define STM32_ADC34PRES_DIV16 (23 << 4) /**< ADC34 clock is PLL/16. */
+#define STM32_ADC34PRES_DIV32 (24 << 4) /**< ADC34 clock is PLL/32. */
+#define STM32_ADC34PRES_DIV64 (25 << 4) /**< ADC34 clock is PLL/64. */
+#define STM32_ADC34PRES_DIV128 (26 << 4) /**< ADC34 clock is PLL/128. */
+#define STM32_ADC34PRES_DIV256 (27 << 4) /**< ADC34 clock is PLL/256. */
+/** @} */
+
+/**
+ * @name RCC_CFGR3 register bits definitions
+ * @{
+ */
+#define STM32_USART1SW_MASK (3 << 0) /**< USART1 clock source mask. */
+#define STM32_USART1SW_PCLK (0 << 0) /**< USART1 clock is PCLK. */
+#define STM32_USART1SW_SYSCLK (1 << 0) /**< USART1 clock is SYSCLK. */
+#define STM32_USART1SW_LSE (2 << 0) /**< USART1 clock is LSE. */
+#define STM32_USART1SW_HSI (3 << 0) /**< USART1 clock is HSI. */
+#define STM32_I2C1SW_MASK (1 << 4) /**< I2C1 clock source mask. */
+#define STM32_I2C1SW_HSI (0 << 4) /**< I2C1 clock is HSI. */
+#define STM32_I2C1SW_SYSCLK (1 << 4) /**< I2C1 clock is SYSCLK. */
+#define STM32_I2C2SW_MASK (1 << 5) /**< I2C2 clock source mask. */
+#define STM32_I2C2SW_HSI (0 << 5) /**< I2C2 clock is HSI. */
+#define STM32_I2C2SW_SYSCLK (1 << 5) /**< I2C2 clock is SYSCLK. */
+#define STM32_TIM1SW_MASK (1 << 8) /**< TIM1 clock source mask. */
+#define STM32_TIM1SW_PCLK2 (0 << 8) /**< TIM1 clock is PCLK2. */
+#define STM32_TIM1SW_PLLX2 (1 << 10) /**< TIM1 clock is PLL*2. */
+#define STM32_TIM8SW_MASK (1 << 10) /**< TIM8 clock source mask. */
+#define STM32_TIM8SW_PCLK2 (0 << 10) /**< TIM8 clock is PCLK2. */
+#define STM32_TIM8SW_PLLX2 (1 << 10) /**< TIM8 clock is PLL*2. */
+#define STM32_USART2SW_MASK (3 << 16) /**< USART2 clock source mask. */
+#define STM32_USART2SW_PCLK (0 << 16) /**< USART2 clock is PCLK. */
+#define STM32_USART2SW_SYSCLK (1 << 16) /**< USART2 clock is SYSCLK. */
+#define STM32_USART2SW_LSE (2 << 16) /**< USART2 clock is LSE. */
+#define STM32_USART2SW_HSI (3 << 16) /**< USART2 clock is HSI. */
+#define STM32_USART3SW_MASK (3 << 18) /**< USART3 clock source mask. */
+#define STM32_USART3SW_PCLK (0 << 18) /**< USART3 clock is PCLK. */
+#define STM32_USART3SW_SYSCLK (1 << 18) /**< USART3 clock is SYSCLK. */
+#define STM32_USART3SW_LSE (2 << 18) /**< USART3 clock is LSE. */
+#define STM32_USART3SW_HSI (3 << 18) /**< USART3 clock is HSI. */
+#define STM32_UART4SW_MASK (3 << 20) /**< USART4 clock source mask. */
+#define STM32_UART4SW_PCLK (0 << 20) /**< USART4 clock is PCLK. */
+#define STM32_UART4SW_SYSCLK (1 << 20) /**< USART4 clock is SYSCLK. */
+#define STM32_UART4SW_LSE (2 << 20) /**< USART4 clock is LSE. */
+#define STM32_UART4SW_HSI (3 << 20) /**< USART4 clock is HSI. */
+#define STM32_UART5SW_MASK (3 << 22) /**< USART5 clock source mask. */
+#define STM32_UART5SW_PCLK (0 << 22) /**< USART5 clock is PCLK. */
+#define STM32_UART5SW_SYSCLK (1 << 22) /**< USART5 clock is SYSCLK. */
+#define STM32_UART5SW_LSE (2 << 22) /**< USART5 clock is LSE. */
+#define STM32_UART5SW_HSI (3 << 22) /**< USART5 clock is HSI. */
+/** @} */
+
+/*===========================================================================*/
+/* Driver pre-compile time settings. */
+/*===========================================================================*/
+
+/**
+ * @name Configuration options
+ * @{
+ */
+/**
+ * @brief Disables the PWR/RCC initialization in the HAL.
+ */
+#if !defined(STM32_NO_INIT) || defined(__DOXYGEN__)
+#define STM32_NO_INIT FALSE
+#endif
+
+/**
+ * @brief Enables or disables the programmable voltage detector.
+ */
+#if !defined(STM32_PVD_ENABLE) || defined(__DOXYGEN__)
+#define STM32_PVD_ENABLE FALSE
+#endif
+
+/**
+ * @brief Sets voltage level for programmable voltage detector.
+ */
+#if !defined(STM32_PLS) || defined(__DOXYGEN__)
+#define STM32_PLS STM32_PLS_LEV0
+#endif
+
+/**
+ * @brief Enables or disables the HSI clock source.
+ */
+#if !defined(STM32_HSI_ENABLED) || defined(__DOXYGEN__)
+#define STM32_HSI_ENABLED TRUE
+#endif
+
+/**
+ * @brief Enables or disables the LSI clock source.
+ */
+#if !defined(STM32_LSI_ENABLED) || defined(__DOXYGEN__)
+#define STM32_LSI_ENABLED TRUE
+#endif
+
+/**
+ * @brief Enables or disables the HSE clock source.
+ */
+#if !defined(STM32_HSE_ENABLED) || defined(__DOXYGEN__)
+#define STM32_HSE_ENABLED TRUE
+#endif
+
+/**
+ * @brief Enables or disables the LSE clock source.
+ */
+#if !defined(STM32_LSE_ENABLED) || defined(__DOXYGEN__)
+#define STM32_LSE_ENABLED FALSE
+#endif
+
+/**
+ * @brief Main clock source selection.
+ * @note If the selected clock source is not the PLL then the PLL is not
+ * initialized and started.
+ * @note The default value is calculated for a 72MHz system clock from
+ * a 8MHz crystal using the PLL.
+ */
+#if !defined(STM32_SW) || defined(__DOXYGEN__)
+#define STM32_SW STM32_SW_PLL
+#endif
+
+/**
+ * @brief Clock source for the PLL.
+ * @note This setting has only effect if the PLL is selected as the
+ * system clock source.
+ * @note The default value is calculated for a 72MHz system clock from
+ * a 8MHz crystal using the PLL.
+ */
+#if !defined(STM32_PLLSRC) || defined(__DOXYGEN__)
+#define STM32_PLLSRC STM32_PLLSRC_HSE
+#endif
+
+/**
+ * @brief Crystal PLL pre-divider.
+ * @note This setting has only effect if the PLL is selected as the
+ * system clock source.
+ * @note The default value is calculated for a 72MHz system clock from
+ * a 8MHz crystal using the PLL.
+ */
+#if !defined(STM32_PREDIV_VALUE) || defined(__DOXYGEN__)
+#define STM32_PREDIV_VALUE 1
+#endif
+
+/**
+ * @brief PLL multiplier value.
+ * @note The allowed range is 2...16.
+ * @note The default value is calculated for a 72MHz system clock from
+ * a 8MHz crystal using the PLL.
+ */
+#if !defined(STM32_PLLMUL_VALUE) || defined(__DOXYGEN__)
+#define STM32_PLLMUL_VALUE 9
+#endif
+
+/**
+ * @brief AHB prescaler value.
+ * @note The default value is calculated for a 72MHz system clock from
+ * a 8MHz crystal using the PLL.
+ */
+#if !defined(STM32_HPRE) || defined(__DOXYGEN__)
+#define STM32_HPRE STM32_HPRE_DIV1
+#endif
+
+/**
+ * @brief APB1 prescaler value.
+ */
+#if !defined(STM32_PPRE1) || defined(__DOXYGEN__)
+#define STM32_PPRE1 STM32_PPRE1_DIV2
+#endif
+
+/**
+ * @brief APB2 prescaler value.
+ */
+#if !defined(STM32_PPRE2) || defined(__DOXYGEN__)
+#define STM32_PPRE2 STM32_PPRE2_DIV2
+#endif
+
+/**
+ * @brief MCO pin setting.
+ */
+#if !defined(STM32_MCOSEL) || defined(__DOXYGEN__)
+#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK
+#endif
+
+/**
+ * @brief ADC12 prescaler value.
+ */
+#if !defined(STM32_ADC12PRES) || defined(__DOXYGEN__)
+#define STM32_ADC12PRES STM32_ADC12PRES_DIV1
+#endif
+
+/**
+ * @brief ADC34 prescaler value.
+ */
+#if !defined(STM32_ADC34PRES) || defined(__DOXYGEN__)
+#define STM32_ADC34PRES STM32_ADC34PRES_DIV1
+#endif
+
+/**
+ * @brief USART1 clock source.
+ */
+#if !defined(STM32_USART1SW) || defined(__DOXYGEN__)
+#define STM32_USART1SW STM32_USART1SW_PCLK
+#endif
+
+/**
+ * @brief USART2 clock source.
+ */
+#if !defined(STM32_USART2SW) || defined(__DOXYGEN__)
+#define STM32_USART2SW STM32_USART2SW_PCLK
+#endif
+
+/**
+ * @brief USART3 clock source.
+ */
+#if !defined(STM32_USART3SW) || defined(__DOXYGEN__)
+#define STM32_USART3SW STM32_USART3SW_PCLK
+#endif
+
+/**
+ * @brief UART4 clock source.
+ */
+#if !defined(STM32_UART4SW) || defined(__DOXYGEN__)
+#define STM32_UART4SW STM32_UART4SW_PCLK
+#endif
+
+/**
+ * @brief UART5 clock source.
+ */
+#if !defined(STM32_UART5SW) || defined(__DOXYGEN__)
+#define STM32_UART5SW STM32_UART5SW_PCLK
+#endif
+
+/**
+ * @brief I2C1 clock source.
+ */
+#if !defined(STM32_I2C1SW) || defined(__DOXYGEN__)
+#define STM32_I2C1SW STM32_I2C1SW_SYSCLK
+#endif
+
+/**
+ * @brief I2C2 clock source.
+ */
+#if !defined(STM32_I2C2SW) || defined(__DOXYGEN__)
+#define STM32_I2C2SW STM32_I2C2SW_SYSCLK
+#endif
+
+/**
+ * @brief TIM1 clock source.
+ */
+#if !defined(STM32_TIM1SW) || defined(__DOXYGEN__)
+#define STM32_TIM1SW STM32_TIM1SW_PCLK2
+#endif
+
+/**
+ * @brief TIM8 clock source.
+ */
+#if !defined(STM32_TIM8SW) || defined(__DOXYGEN__)
+#define STM32_TIM8SW STM32_TIM8SW_PCLK2
+#endif
+
+/**
+ * @brief RTC clock source.
+ */
+#if !defined(STM32_RTCSEL) || defined(__DOXYGEN__)
+#define STM32_RTCSEL STM32_RTCSEL_LSI
+#endif
+
+/**
+ * @brief USB clock setting.
+ */
+#if !defined(STM32_USB_CLOCK_REQUIRED) || defined(__DOXYGEN__)
+#define STM32_USB_CLOCK_REQUIRED TRUE
+#endif
+
+/**
+ * @brief USB prescaler initialization.
+ */
+#if !defined(STM32_USBPRE) || defined(__DOXYGEN__)
+#define STM32_USBPRE STM32_USBPRE_DIV1P5
+#endif
+/** @} */
+
+/*===========================================================================*/
+/* Derived constants and error checks. */
+/*===========================================================================*/
+
+/*
+ * Configuration-related checks.
+ */
+#if !defined(STM32F30x_MCUCONF)
+#error "Using a wrong mcuconf.h file, STM32F30x_MCUCONF not defined"
+#endif
+
+/*
+ * HSI related checks.
+ */
+#if STM32_HSI_ENABLED
+#else /* !STM32_HSI_ENABLED */
+
+#if STM32_SW == STM32_SW_HSI
+#error "HSI not enabled, required by STM32_SW"
+#endif
+
+#if STM32_USART1SW == STM32_USART1SW_HSI
+#error "HSI not enabled, required by STM32_USART1SW"
+#endif
+
+#if STM32_USART2SW == STM32_USART2SW_HSI
+#error "HSI not enabled, required by STM32_USART2SW"
+#endif
+
+#if STM32_USART3SW == STM32_USART3SW_HSI
+#error "HSI not enabled, required by STM32_USART3SW"
+#endif
+
+#if STM32_UART4SW == STM32_UART4SW_HSI
+#error "HSI not enabled, required by STM32_UART4SW"
+#endif
+
+#if STM32_UART5SW == STM32_UART5SW_HSI
+#error "HSI not enabled, required by STM32_UART5SW"
+#endif
+
+#if STM32_I2C1SW == STM32_I2C1SW_HSI
+#error "HSI not enabled, required by STM32_I2C1SW"
+#endif
+
+#if STM32_I2C2SW == STM32_I2C2SW_HSI
+#error "HSI not enabled, required by STM32_I2C2SW"
+#endif
+
+#if STM32_TIM1SW == STM32_TIM1SW_HSI
+#error "HSI not enabled, required by STM32_TIM1SW"
+#endif
+
+#if STM32_TIM8SW == STM32_TIM8SW_HSI
+#error "HSI not enabled, required by STM32_TIM8SW"
+#endif
+
+#if (STM32_SW == STM32_SW_PLL) && (STM32_PLLSRC == STM32_PLLSRC_HSI)
+#error "HSI not enabled, required by STM32_SW and STM32_PLLSRC"
+#endif
+
+#if (STM32_MCOSEL == STM32_MCOSEL_HSI) || \
+ ((STM32_MCOSEL == STM32_MCOSEL_PLLDIV2) && \
+ (STM32_PLLSRC == STM32_PLLSRC_HSI))
+#error "HSI not enabled, required by STM32_MCOSEL"
+#endif
+
+#endif /* !STM32_HSI_ENABLED */
+
+/*
+ * HSE related checks.
+ */
+#if STM32_HSE_ENABLED
+
+#if STM32_HSECLK == 0
+#error "HSE frequency not defined"
+#elif (STM32_HSECLK < STM32_HSECLK_MIN) || (STM32_HSECLK > STM32_HSECLK_MAX)
+#error "STM32_HSECLK outside acceptable range (STM32_HSECLK_MIN...STM32_HSECLK_MAX)"
+#endif
+
+#else /* !STM32_HSE_ENABLED */
+
+#if STM32_SW == STM32_SW_HSE
+#error "HSE not enabled, required by STM32_SW"
+#endif
+
+#if (STM32_SW == STM32_SW_PLL) && (STM32_PLLSRC == STM32_PLLSRC_HSE)
+#error "HSE not enabled, required by STM32_SW and STM32_PLLSRC"
+#endif
+
+#if (STM32_MCOSEL == STM32_MCOSEL_HSE) || \
+ ((STM32_MCOSEL == STM32_MCOSEL_PLLDIV2) && \
+ (STM32_PLLSRC == STM32_PLLSRC_HSE))
+#error "HSE not enabled, required by STM32_MCOSEL"
+#endif
+
+#if STM32_RTCSEL == STM32_RTCSEL_HSEDIV
+#error "HSE not enabled, required by STM32_RTCSEL"
+#endif
+
+#endif /* !STM32_HSE_ENABLED */
+
+/*
+ * LSI related checks.
+ */
+#if STM32_LSI_ENABLED
+#else /* !STM32_LSI_ENABLED */
+
+#if STM32_RTCSEL == STM32_RTCSEL_LSI
+#error "LSI not enabled, required by STM32_RTCSEL"
+#endif
+
+#endif /* !STM32_LSI_ENABLED */
+
+/*
+ * LSE related checks.
+ */
+#if STM32_LSE_ENABLED
+
+#if !defined(STM32_LSECLK) || (STM32_LSECLK == 0)
+#error "STM32_LSECLK not defined"
+#endif
+
+#if (STM32_LSECLK < STM32_LSECLK_MIN) || (STM32_LSECLK > STM32_LSECLK_MAX)
+#error "STM32_LSECLK outside acceptable range (STM32_LSECLK_MIN...STM32_LSECLK_MAX)"
+#endif
+
+#if !defined(STM32_LSEDRV)
+#error "STM32_LSEDRV not defined"
+#endif
+
+#if (STM32_LSEDRV >> 3) > 3
+#error "STM32_LSEDRV outside acceptable range ((0<<3)...(3<<3))"
+#endif
+
+#if STM32_USART1SW == STM32_USART1SW_LSE
+#error "LSE not enabled, required by STM32_USART1SW"
+#endif
+
+#if STM32_USART2SW == STM32_USART2SW_LSE
+#error "LSE not enabled, required by STM32_USART2SW"
+#endif
+
+#if STM32_USART3SW == STM32_USART3SW_LSE
+#error "LSE not enabled, required by STM32_USART3SW"
+#endif
+
+#if STM32_UART4SW == STM32_UART4SW_LSE
+#error "LSE not enabled, required by STM32_UART4SW"
+#endif
+
+#if STM32_UART5SW == STM32_UART5SW_LSE
+#error "LSE not enabled, required by STM32_UART5SW"
+#endif
+
+#else /* !STM32_LSE_ENABLED */
+
+#if STM32_RTCSEL == STM32_RTCSEL_LSE
+#error "LSE not enabled, required by STM32_RTCSEL"
+#endif
+
+#endif /* !STM32_LSE_ENABLED */
+
+/* PLL activation conditions.*/
+#if (STM32_SW == STM32_SW_PLL) || \
+ (STM32_MCOSEL == STM32_MCOSEL_PLLDIV2) || \
+ (STM32_TIM1SW == STM32_TIM1SW_PLLX2) || \
+ (STM32_TIM8SW == STM32_TIM8SW_PLLX2) || \
+ (STM32_ADC12PRES != STM32_ADC12PRES_NOCLOCK) || \
+ (STM32_ADC34PRES != STM32_ADC34PRES_NOCLOCK) || \
+ STM32_USB_CLOCK_REQUIRED || \
+ defined(__DOXYGEN__)
+/**
+ * @brief PLL activation flag.
+ */
+#define STM32_ACTIVATE_PLL TRUE
+#else
+#define STM32_ACTIVATE_PLL FALSE
+#endif
+
+/* HSE prescaler setting check.*/
+#if ((STM32_PREDIV_VALUE >= 1) || (STM32_PREDIV_VALUE <= 16))
+#define STM32_PREDIV ((STM32_PREDIV_VALUE - 1) << 0)
+#else
+#error "invalid STM32_PREDIV value specified"
+#endif
+
+/**
+ * @brief PLLMUL field.
+ */
+#if ((STM32_PLLMUL_VALUE >= 2) && (STM32_PLLMUL_VALUE <= 16)) || \
+ defined(__DOXYGEN__)
+#define STM32_PLLMUL ((STM32_PLLMUL_VALUE - 2) << 18)
+#else
+#error "invalid STM32_PLLMUL_VALUE value specified"
+#endif
+
+/**
+ * @brief PLL input clock frequency.
+ */
+#if (STM32_PLLSRC == STM32_PLLSRC_HSE) || defined(__DOXYGEN__)
+#define STM32_PLLCLKIN (STM32_HSECLK / STM32_PREDIV_VALUE)
+#elif STM32_PLLSRC == STM32_PLLSRC_HSI
+#define STM32_PLLCLKIN (STM32_HSICLK / 2)
+#else
+#error "invalid STM32_PLLSRC value specified"
+#endif
+
+/* PLL input frequency range check.*/
+#if (STM32_PLLCLKIN < STM32_PLLIN_MIN) || (STM32_PLLCLKIN > STM32_PLLIN_MAX)
+#error "STM32_PLLCLKIN outside acceptable range (STM32_PLLIN_MIN...STM32_PLLIN_MAX)"
+#endif
+
+/**
+ * @brief PLL output clock frequency.
+ */
+#define STM32_PLLCLKOUT (STM32_PLLCLKIN * STM32_PLLMUL_VALUE)
+
+/* PLL output frequency range check.*/
+#if (STM32_PLLCLKOUT < STM32_PLLOUT_MIN) || (STM32_PLLCLKOUT > STM32_PLLOUT_MAX)
+#error "STM32_PLLCLKOUT outside acceptable range (STM32_PLLOUT_MIN...STM32_PLLOUT_MAX)"
+#endif
+
+/**
+ * @brief System clock source.
+ */
+#if (STM32_SW == STM32_SW_PLL) || defined(__DOXYGEN__)
+#define STM32_SYSCLK STM32_PLLCLKOUT
+#elif (STM32_SW == STM32_SW_HSI)
+#define STM32_SYSCLK STM32_HSICLK
+#elif (STM32_SW == STM32_SW_HSE)
+#define STM32_SYSCLK STM32_HSECLK
+#else
+#error "invalid STM32_SW value specified"
+#endif
+
+/* Check on the system clock.*/
+#if STM32_SYSCLK > STM32_SYSCLK_MAX
+#error "STM32_SYSCLK above maximum rated frequency (STM32_SYSCLK_MAX)"
+#endif
+
+/**
+ * @brief AHB frequency.
+ */
+#if (STM32_HPRE == STM32_HPRE_DIV1) || defined(__DOXYGEN__)
+#define STM32_HCLK (STM32_SYSCLK / 1)
+#elif STM32_HPRE == STM32_HPRE_DIV2
+#define STM32_HCLK (STM32_SYSCLK / 2)
+#elif STM32_HPRE == STM32_HPRE_DIV4
+#define STM32_HCLK (STM32_SYSCLK / 4)
+#elif STM32_HPRE == STM32_HPRE_DIV8
+#define STM32_HCLK (STM32_SYSCLK / 8)
+#elif STM32_HPRE == STM32_HPRE_DIV16
+#define STM32_HCLK (STM32_SYSCLK / 16)
+#elif STM32_HPRE == STM32_HPRE_DIV64
+#define STM32_HCLK (STM32_SYSCLK / 64)
+#elif STM32_HPRE == STM32_HPRE_DIV128
+#define STM32_HCLK (STM32_SYSCLK / 128)
+#elif STM32_HPRE == STM32_HPRE_DIV256
+#define STM32_HCLK (STM32_SYSCLK / 256)
+#elif STM32_HPRE == STM32_HPRE_DIV512
+#define STM32_HCLK (STM32_SYSCLK / 512)
+#else
+#error "invalid STM32_HPRE value specified"
+#endif
+
+/* AHB frequency check.*/
+#if STM32_HCLK > STM32_SYSCLK_MAX
+#error "STM32_HCLK exceeding maximum frequency (STM32_SYSCLK_MAX)"
+#endif
+
+/**
+ * @brief APB1 frequency.
+ */
+#if (STM32_PPRE1 == STM32_PPRE1_DIV1) || defined(__DOXYGEN__)
+#define STM32_PCLK1 (STM32_HCLK / 1)
+#elif STM32_PPRE1 == STM32_PPRE1_DIV2
+#define STM32_PCLK1 (STM32_HCLK / 2)
+#elif STM32_PPRE1 == STM32_PPRE1_DIV4
+#define STM32_PCLK1 (STM32_HCLK / 4)
+#elif STM32_PPRE1 == STM32_PPRE1_DIV8
+#define STM32_PCLK1 (STM32_HCLK / 8)
+#elif STM32_PPRE1 == STM32_PPRE1_DIV16
+#define STM32_PCLK1 (STM32_HCLK / 16)
+#else
+#error "invalid STM32_PPRE1 value specified"
+#endif
+
+/* APB1 frequency check.*/
+#if STM32_PCLK1 > STM32_PCLK1_MAX
+#error "STM32_PCLK1 exceeding maximum frequency (STM32_PCLK1_MAX)"
+#endif
+
+/**
+ * @brief APB2 frequency.
+ */
+#if (STM32_PPRE2 == STM32_PPRE2_DIV1) || defined(__DOXYGEN__)
+#define STM32_PCLK2 (STM32_HCLK / 1)
+#elif STM32_PPRE2 == STM32_PPRE2_DIV2
+#define STM32_PCLK2 (STM32_HCLK / 2)
+#elif STM32_PPRE2 == STM32_PPRE2_DIV4
+#define STM32_PCLK2 (STM32_HCLK / 4)
+#elif STM32_PPRE2 == STM32_PPRE2_DIV8
+#define STM32_PCLK2 (STM32_HCLK / 8)
+#elif STM32_PPRE2 == STM32_PPRE2_DIV16
+#define STM32_PCLK2 (STM32_HCLK / 16)
+#else
+#error "invalid STM32_PPRE2 value specified"
+#endif
+
+/* APB2 frequency check.*/
+#if STM32_PCLK2 > STM32_PCLK2_MAX
+#error "STM32_PCLK2 exceeding maximum frequency (STM32_PCLK2_MAX)"
+#endif
+
+/**
+ * @brief RTC clock.
+ */
+#if (STM32_RTCSEL == STM32_RTCSEL_LSE) || defined(__DOXYGEN__)
+#define STM32_RTCCLK STM32_LSECLK
+#elif STM32_RTCSEL == STM32_RTCSEL_LSI
+#define STM32_RTCCLK STM32_LSICLK
+#elif STM32_RTCSEL == STM32_RTCSEL_HSEDIV
+#define STM32_RTCCLK (STM32_HSECLK / 32)
+#elif STM32_RTCSEL == STM32_RTCSEL_NOCLOCK
+#define STM32_RTCCLK 0
+#else
+#error "invalid source selected for RTC clock"
+#endif
+
+/**
+ * @brief ADC12 frequency.
+ */
+#if (STM32_ADC12PRES == STM32_ADC12PRES_NOCLOCK) || defined(__DOXYGEN__)
+#define STM32_ADC12CLK 0
+#elif STM32_ADC12PRES == STM32_ADC12PRES_DIV1
+#define STM32_ADC12CLK (STM32_PLLCLKOUT / 1)
+#elif STM32_ADC12PRES == STM32_ADC12PRES_DIV2
+#define STM32_ADC12CLK (STM32_PLLCLKOUT / 2)
+#elif STM32_ADC12PRES == STM32_ADC12PRES_DIV4
+#define STM32_ADC12CLK (STM32_PLLCLKOUT / 4)
+#elif STM32_ADC12PRES == STM32_ADC12PRES_DIV6
+#define STM32_ADC12CLK (STM32_PLLCLKOUT / 6)
+#elif STM32_ADC12PRES == STM32_ADC12PRES_DIV8
+#define STM32_ADC12CLK (STM32_PLLCLKOUT / 8)
+#elif STM32_ADC12PRES == STM32_ADC12PRES_DIV10
+#define STM32_ADC12CLK (STM32_PLLCLKOUT / 10)
+#elif STM32_ADC12PRES == STM32_ADC12PRES_DIV12
+#define STM32_ADC12CLK (STM32_PLLCLKOUT / 12)
+#elif STM32_ADC12PRES == STM32_ADC12PRES_DIV16
+#define STM32_ADC12CLK (STM32_PLLCLKOUT / 16)
+#elif STM32_ADC12PRES == STM32_ADC12PRES_DIV32
+#define STM32_ADC12CLK (STM32_PLLCLKOUT / 32)
+#elif STM32_ADC12PRES == STM32_ADC12PRES_DIV64
+#define STM32_ADC12CLK (STM32_PLLCLKOUT / 64)
+#elif STM32_ADC12PRES == STM32_ADC12PRES_DIV128
+#define STM32_ADC12CLK (STM32_PLLCLKOUT / 128)
+#elif STM32_ADC12PRES == STM32_ADC12PRES_DIV256
+#define STM32_ADC12CLK (STM32_PLLCLKOUT / 256)
+#else
+#error "invalid STM32_ADC12PRES value specified"
+#endif
+
+/**
+ * @brief ADC34 frequency.
+ */
+#if (STM32_ADC43PRES == STM32_ADC34PRES_NOCLOCK) || defined(__DOXYGEN__)
+#define STM32_ADC34CLK 0
+#elif STM32_ADC34PRES == STM32_ADC34PRES_DIV1
+#define STM32_ADC34CLK (STM32_PLLCLKOUT / 1)
+#elif STM32_ADC34PRES == STM32_ADC34PRES_DIV2
+#define STM32_ADC34CLK (STM32_PLLCLKOUT / 2)
+#elif STM32_ADC34PRES == STM32_ADC34PRES_DIV4
+#define STM32_ADC34CLK (STM32_PLLCLKOUT / 4)
+#elif STM32_ADC34PRES == STM32_ADC34PRES_DIV6
+#define STM32_ADC34CLK (STM32_PLLCLKOUT / 6)
+#elif STM32_ADC34PRES == STM32_ADC34PRES_DIV8
+#define STM32_ADC34CLK (STM32_PLLCLKOUT / 8)
+#elif STM32_ADC34PRES == STM32_ADC34PRES_DIV10
+#define STM32_ADC34CLK (STM32_PLLCLKOUT / 10)
+#elif STM32_ADC34PRES == STM32_ADC34PRES_DIV12
+#define STM32_ADC34CLK (STM32_PLLCLKOUT / 12)
+#elif STM32_ADC34PRES == STM32_ADC34PRES_DIV16
+#define STM32_ADC34CLK (STM32_PLLCLKOUT / 16)
+#elif STM32_ADC34PRES == STM32_ADC34PRES_DIV32
+#define STM32_ADC34CLK (STM32_PLLCLKOUT / 32)
+#elif STM32_ADC34PRES == STM32_ADC34PRES_DIV64
+#define STM32_ADC34CLK (STM32_PLLCLKOUT / 64)
+#elif STM32_ADC34PRES == STM32_ADC34PRES_DIV128
+#define STM32_ADC34CLK (STM32_PLLCLKOUT / 128)
+#elif STM32_ADC34PRES == STM32_ADC34PRES_DIV256
+#define STM32_ADC34CLK (STM32_PLLCLKOUT / 256)
+#else
+#error "invalid STM32_ADC34PRES value specified"
+#endif
+
+/* ADC12 frequency check.*/
+#if STM32_ADC12CLK > STM32_ADCCLK_MAX
+#error "STM32_ADC12CLK exceeding maximum frequency (STM32_ADCCLK_MAX)"
+#endif
+
+/* ADC34 frequency check.*/
+#if STM32_ADC34CLK > STM32_ADCCLK_MAX
+#error "STM32_ADC34CLK exceeding maximum frequency (STM32_ADCCLK_MAX)"
+#endif
+
+/**
+ * @brief I2C1 frequency.
+ */
+#if STM32_I2C1SW == STM32_I2C1SW_HSI
+#define STM32_I2C1CLK STM32_HSICLK
+#elif STM32_I2C1SW == STM32_I2C1SW_SYSCLK
+#define STM32_I2C1CLK STM32_SYSCLK
+#else
+#error "invalid source selected for I2C1 clock"
+#endif
+
+/**
+ * @brief I2C2 frequency.
+ */
+#if STM32_I2C2SW == STM32_I2C2SW_HSI
+#define STM32_I2C2CLK STM32_HSICLK
+#elif STM32_I2C2SW == STM32_I2C2SW_SYSCLK
+#define STM32_I2C2CLK STM32_SYSCLK
+#else
+#error "invalid source selected for I2C2 clock"
+#endif
+
+/**
+ * @brief USART1 frequency.
+ */
+#if STM32_USART1SW == STM32_USART1SW_PCLK
+#define STM32_USART1CLK STM32_PCLK2
+#elif STM32_USART1SW == STM32_USART1SW_SYSCLK
+#define STM32_USART1CLK STM32_SYSCLK
+#elif STM32_USART1SW == STM32_USART1SW_LSECLK
+#define STM32_USART1CLK STM32_LSECLK
+#elif STM32_USART1SW == STM32_USART1SW_HSICLK
+#define STM32_USART1CLK STM32_HSICLK
+#else
+#error "invalid source selected for USART1 clock"
+#endif
+
+/**
+ * @brief USART2 frequency.
+ */
+#if STM32_USART2SW == STM32_USART2SW_PCLK
+#define STM32_USART2CLK STM32_PCLK1
+#elif STM32_USART2SW == STM32_USART2SW_SYSCLK
+#define STM32_USART2CLK STM32_SYSCLK
+#elif STM32_USART2SW == STM32_USART2SW_LSECLK
+#define STM32_USART2CLK STM32_LSECLK
+#elif STM32_USART2SW == STM32_USART2SW_HSICLK
+#define STM32_USART2CLK STM32_HSICLK
+#else
+#error "invalid source selected for USART2 clock"
+#endif
+
+/**
+ * @brief USART3 frequency.
+ */
+#if STM32_USART3SW == STM32_USART3SW_PCLK
+#define STM32_USART3CLK STM32_PCLK1
+#elif STM32_USART3SW == STM32_USART3SW_SYSCLK
+#define STM32_USART3CLK STM32_SYSCLK
+#elif STM32_USART3SW == STM32_USART3SW_LSECLK
+#define STM32_USART3CLK STM32_LSECLK
+#elif STM32_USART3SW == STM32_USART3SW_HSICLK
+#define STM32_USART3CLK STM32_HSICLK
+#else
+#error "invalid source selected for USART3 clock"
+#endif
+
+/**
+ * @brief UART4 frequency.
+ */
+#if STM32_UART4SW == STM32_UART4SW_PCLK
+#define STM32_UART4CLK STM32_PCLK1
+#elif STM32_UART4SW == STM32_UART4SW_SYSCLK
+#define STM32_UART4CLK STM32_SYSCLK
+#elif STM32_UART4SW == STM32_UART4SW_LSECLK
+#define STM32_UART4CLK STM32_LSECLK
+#elif STM32_UART4SW == STM32_UART4SW_HSICLK
+#define STM32_UART4CLK STM32_HSICLK
+#else
+#error "invalid source selected for UART4 clock"
+#endif
+
+/**
+ * @brief UART5 frequency.
+ */
+#if STM32_UART5SW == STM32_UART5SW_PCLK
+#define STM32_UART5CLK STM32_PCLK1
+#elif STM32_UART5SW == STM32_UART5SW_SYSCLK
+#define STM32_UART5CLK STM32_SYSCLK
+#elif STM32_UART5SW == STM32_UART5SW_LSECLK
+#define STM32_UART5CLK STM32_LSECLK
+#elif STM32_UART5SW == STM32_UART5SW_HSICLK
+#define STM32_UART5CLK STM32_HSICLK
+#else
+#error "invalid source selected for UART5 clock"
+#endif
+
+/**
+ * @brief TIM1 frequency.
+ */
+#if STM32_TIM1SW == STM32_TIM1SW_PCLK2
+#define STM32_TIM1CLK STM32_PCLK2
+#elif STM32_TIM1SW == STM32_TIM1SW_PLLX2
+#define STM32_TIM1CLK (STM32_PLLCLKOUT * 2)
+#else
+#error "invalid source selected for TIM1 clock"
+#endif
+
+/**
+ * @brief TIM8 frequency.
+ */
+#if STM32_TIM8SW == STM32_TIM8SW_PCLK2
+#define STM32_TIM8CLK STM32_PCLK2
+#elif STM32_TIM8SW == STM32_TIM8SW_PLLX2
+#define STM32_TIM8CLK (STM32_PLLCLKOUT * 2)
+#else
+#error "invalid source selected for TIM8 clock"
+#endif
+
+/**
+ * @brief Timers 2, 3, 4, 6, 7 frequency.
+ */
+#if (STM32_PPRE1 == STM32_PPRE1_DIV1) || defined(__DOXYGEN__)
+#define STM32_TIMCLK1 (STM32_PCLK1 * 1)
+#else
+#define STM32_TIMCLK1 (STM32_PCLK1 * 2)
+#endif
+
+/**
+ * @brief Timers 1, 8, 15, 16, 17 frequency.
+ */
+#if (STM32_PPRE2 == STM32_PPRE2_DIV1) || defined(__DOXYGEN__)
+#define STM32_TIMCLK2 (STM32_PCLK2 * 1)
+#else
+#define STM32_TIMCLK2 (STM32_PCLK2 * 2)
+#endif
+
+/**
+ * @brief USB frequency.
+ */
+#if (STM32_USBPRE == STM32_USBPRE_DIV1P5) || defined(__DOXYGEN__)
+#define STM32_USBCLK ((STM32_PLLCLKOUT * 2) / 3)
+#elif (STM32_USBPRE == STM32_USBPRE_DIV1)
+#define STM32_USBCLK STM32_PLLCLKOUT
+#else
+#error "invalid STM32_USBPRE value specified"
+#endif
+
+/**
+ * @brief Flash settings.
+ */
+#if (STM32_HCLK <= 24000000) || defined(__DOXYGEN__)
+#define STM32_FLASHBITS 0x00000010
+#elif STM32_HCLK <= 48000000
+#define STM32_FLASHBITS 0x00000011
+#else
+#define STM32_FLASHBITS 0x00000012
+#endif
+
+/*===========================================================================*/
+/* Driver data structures and types. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver macros. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* External declarations. */
+/*===========================================================================*/
+
+/* Various helpers.*/
+#include "nvic.h"
+#include "stm32_isr.h"
+#include "stm32_dma.h"
+#include "stm32_rcc.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+ void hal_lld_init(void);
+ void stm32_clock_init(void);
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* _HAL_LLD_H_ */
+
+/** @} */
diff --git a/os/hal/platforms/STM32F30x/platform.mk b/os/hal/platforms/STM32F30x/platform.mk new file mode 100644 index 000000000..d45dbdb83 --- /dev/null +++ b/os/hal/platforms/STM32F30x/platform.mk @@ -0,0 +1,30 @@ +# List of all the STM32F30x platform files.
+PLATFORMSRC = ${CHIBIOS}/os/halnew/platforms/common/ARMCMx/nvic.c \
+ ${CHIBIOS}/os/halnew/platforms/STM32F30x/stm32_dma.c \
+ ${CHIBIOS}/os/halnew/platforms/STM32F30x/hal_lld.c \
+ ${CHIBIOS}/os/halnew/platforms/STM32F30x/adc_lld.c \
+ ${CHIBIOS}/os/halnew/platforms/STM32F30x/ext_lld_isr.c \
+ ${CHIBIOS}/os/halnew/platforms/STM32/can_lld.c \
+ ${CHIBIOS}/os/halnew/platforms/STM32/ext_lld.c \
+ ${CHIBIOS}/os/halnew/platforms/STM32/gpt_lld.c \
+ ${CHIBIOS}/os/halnew/platforms/STM32/icu_lld.c \
+ ${CHIBIOS}/os/halnew/platforms/STM32/pwm_lld.c \
+ ${CHIBIOS}/os/halnew/platforms/STM32/st_lld.c \
+ ${CHIBIOS}/os/halnew/platforms/STM32/GPIOv2/pal_lld.c \
+ ${CHIBIOS}/os/halnew/platforms/STM32/I2Cv2/i2c_lld.c \
+ ${CHIBIOS}/os/halnew/platforms/STM32/RTCv2/rtc_lld.c \
+ ${CHIBIOS}/os/halnew/platforms/STM32/SPIv2/spi_lld.c \
+ ${CHIBIOS}/os/halnew/platforms/STM32/USARTv2/serial_lld.c \
+ ${CHIBIOS}/os/halnew/platforms/STM32/USARTv2/uart_lld.c \
+ ${CHIBIOS}/os/halnew/platforms/STM32/USBv1/usb_lld.c
+
+# Required include directories
+PLATFORMINC = ${CHIBIOS}/os/halnew/platforms/common/ARMCMx \
+ ${CHIBIOS}/os/halnew/platforms/STM32F30x \
+ ${CHIBIOS}/os/halnew/platforms/STM32 \
+ ${CHIBIOS}/os/halnew/platforms/STM32/GPIOv2 \
+ ${CHIBIOS}/os/halnew/platforms/STM32/I2Cv2 \
+ ${CHIBIOS}/os/halnew/platforms/STM32/RTCv2 \
+ ${CHIBIOS}/os/halnew/platforms/STM32/SPIv2 \
+ ${CHIBIOS}/os/halnew/platforms/STM32/USARTv2 \
+ ${CHIBIOS}/os/halnew/platforms/STM32/USBv1
diff --git a/os/hal/platforms/STM32F30x/stm32_dma.c b/os/hal/platforms/STM32F30x/stm32_dma.c new file mode 100644 index 000000000..430a9f667 --- /dev/null +++ b/os/hal/platforms/STM32F30x/stm32_dma.c @@ -0,0 +1,449 @@ +/*
+ ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+/**
+ * @file STM32F30x/stm32_dma.c
+ * @brief DMA helper driver code.
+ *
+ * @addtogroup STM32F30x_DMA
+ * @details DMA sharing helper driver. In the STM32 the DMA streams are a
+ * shared resource, this driver allows to allocate and free DMA
+ * streams at runtime in order to allow all the other device
+ * drivers to coordinate the access to the resource.
+ * @note The DMA ISR handlers are all declared into this module because
+ * sharing, the various device drivers can associate a callback to
+ * ISRs when allocating streams.
+ * @{
+ */
+
+#include "hal.h"
+
+/* The following macro is only defined if some driver requiring DMA services
+ has been enabled.*/
+#if defined(STM32_DMA_REQUIRED) || defined(__DOXYGEN__)
+
+/*===========================================================================*/
+/* Driver local definitions. */
+/*===========================================================================*/
+
+/**
+ * @brief Mask of the DMA1 streams in @p dma_streams_mask.
+ */
+#define STM32_DMA1_STREAMS_MASK 0x0000007F
+
+/**
+ * @brief Mask of the DMA2 streams in @p dma_streams_mask.
+ */
+#define STM32_DMA2_STREAMS_MASK 0x00000F80
+
+/**
+ * @brief Post-reset value of the stream CCR register.
+ */
+#define STM32_DMA_CCR_RESET_VALUE 0x00000000
+
+/*===========================================================================*/
+/* Driver exported variables. */
+/*===========================================================================*/
+
+/**
+ * @brief DMA streams descriptors.
+ * @details This table keeps the association between an unique stream
+ * identifier and the involved physical registers.
+ * @note Don't use this array directly, use the appropriate wrapper macros
+ * instead: @p STM32_DMA1_STREAM1, @p STM32_DMA1_STREAM2 etc.
+ */
+const stm32_dma_stream_t _stm32_dma_streams[STM32_DMA_STREAMS] = {
+ {DMA1_Channel1, &DMA1->IFCR, 0, 0, DMA1_Channel1_IRQn},
+ {DMA1_Channel2, &DMA1->IFCR, 4, 1, DMA1_Channel2_IRQn},
+ {DMA1_Channel3, &DMA1->IFCR, 8, 2, DMA1_Channel3_IRQn},
+ {DMA1_Channel4, &DMA1->IFCR, 12, 3, DMA1_Channel4_IRQn},
+ {DMA1_Channel5, &DMA1->IFCR, 16, 4, DMA1_Channel5_IRQn},
+ {DMA1_Channel6, &DMA1->IFCR, 20, 5, DMA1_Channel6_IRQn},
+ {DMA1_Channel7, &DMA1->IFCR, 24, 6, DMA1_Channel7_IRQn},
+ {DMA2_Channel1, &DMA2->IFCR, 0, 7, DMA2_Channel1_IRQn},
+ {DMA2_Channel2, &DMA2->IFCR, 4, 8, DMA2_Channel2_IRQn},
+ {DMA2_Channel3, &DMA2->IFCR, 8, 9, DMA2_Channel3_IRQn},
+ {DMA2_Channel4, &DMA2->IFCR, 12, 10, DMA2_Channel4_IRQn},
+ {DMA2_Channel5, &DMA2->IFCR, 16, 11, DMA2_Channel5_IRQn},
+};
+
+/*===========================================================================*/
+/* Driver local variables and types. */
+/*===========================================================================*/
+
+/**
+ * @brief DMA ISR redirector type.
+ */
+typedef struct {
+ stm32_dmaisr_t dma_func; /**< @brief DMA callback function. */
+ void *dma_param; /**< @brief DMA callback parameter. */
+} dma_isr_redir_t;
+
+/**
+ * @brief Mask of the allocated streams.
+ */
+static uint32_t dma_streams_mask;
+
+/**
+ * @brief DMA IRQ redirectors.
+ */
+static dma_isr_redir_t dma_isr_redir[STM32_DMA_STREAMS];
+
+/*===========================================================================*/
+/* Driver local functions. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver interrupt handlers. */
+/*===========================================================================*/
+
+/**
+ * @brief DMA1 stream 1 shared interrupt handler.
+ *
+ * @isr
+ */
+OSAL_IRQ_HANDLER(Vector6C) {
+ uint32_t flags;
+
+ OSAL_IRQ_PROLOGUE();
+
+ flags = (DMA1->ISR >> 0) & STM32_DMA_ISR_MASK;
+ DMA1->IFCR = STM32_DMA_ISR_MASK << 0;
+ if (dma_isr_redir[0].dma_func)
+ dma_isr_redir[0].dma_func(dma_isr_redir[0].dma_param, flags);
+
+ OSAL_IRQ_EPILOGUE();
+}
+
+/**
+ * @brief DMA1 stream 2 shared interrupt handler.
+ *
+ * @isr
+ */
+OSAL_IRQ_HANDLER(Vector70) {
+ uint32_t flags;
+
+ OSAL_IRQ_PROLOGUE();
+
+ flags = (DMA1->ISR >> 4) & STM32_DMA_ISR_MASK;
+ DMA1->IFCR = STM32_DMA_ISR_MASK << 4;
+ if (dma_isr_redir[1].dma_func)
+ dma_isr_redir[1].dma_func(dma_isr_redir[1].dma_param, flags);
+
+ OSAL_IRQ_EPILOGUE();
+}
+
+/**
+ * @brief DMA1 stream 3 shared interrupt handler.
+ *
+ * @isr
+ */
+OSAL_IRQ_HANDLER(Vector74) {
+ uint32_t flags;
+
+ OSAL_IRQ_PROLOGUE();
+
+ flags = (DMA1->ISR >> 8) & STM32_DMA_ISR_MASK;
+ DMA1->IFCR = STM32_DMA_ISR_MASK << 8;
+ if (dma_isr_redir[2].dma_func)
+ dma_isr_redir[2].dma_func(dma_isr_redir[2].dma_param, flags);
+
+ OSAL_IRQ_EPILOGUE();
+}
+
+/**
+ * @brief DMA1 stream 4 shared interrupt handler.
+ *
+ * @isr
+ */
+OSAL_IRQ_HANDLER(Vector78) {
+ uint32_t flags;
+
+ OSAL_IRQ_PROLOGUE();
+
+ flags = (DMA1->ISR >> 12) & STM32_DMA_ISR_MASK;
+ DMA1->IFCR = STM32_DMA_ISR_MASK << 12;
+ if (dma_isr_redir[3].dma_func)
+ dma_isr_redir[3].dma_func(dma_isr_redir[3].dma_param, flags);
+
+ OSAL_IRQ_EPILOGUE();
+}
+
+/**
+ * @brief DMA1 stream 5 shared interrupt handler.
+ *
+ * @isr
+ */
+OSAL_IRQ_HANDLER(Vector7C) {
+ uint32_t flags;
+
+ OSAL_IRQ_PROLOGUE();
+
+ flags = (DMA1->ISR >> 16) & STM32_DMA_ISR_MASK;
+ DMA1->IFCR = STM32_DMA_ISR_MASK << 16;
+ if (dma_isr_redir[4].dma_func)
+ dma_isr_redir[4].dma_func(dma_isr_redir[4].dma_param, flags);
+
+ OSAL_IRQ_EPILOGUE();
+}
+
+/**
+ * @brief DMA1 stream 6 shared interrupt handler.
+ *
+ * @isr
+ */
+OSAL_IRQ_HANDLER(Vector80) {
+ uint32_t flags;
+
+ OSAL_IRQ_PROLOGUE();
+
+ flags = (DMA1->ISR >> 20) & STM32_DMA_ISR_MASK;
+ DMA1->IFCR = STM32_DMA_ISR_MASK << 20;
+ if (dma_isr_redir[5].dma_func)
+ dma_isr_redir[5].dma_func(dma_isr_redir[5].dma_param, flags);
+
+ OSAL_IRQ_EPILOGUE();
+}
+
+/**
+ * @brief DMA1 stream 7 shared interrupt handler.
+ *
+ * @isr
+ */
+OSAL_IRQ_HANDLER(Vector84) {
+ uint32_t flags;
+
+ OSAL_IRQ_PROLOGUE();
+
+ flags = (DMA1->ISR >> 24) & STM32_DMA_ISR_MASK;
+ DMA1->IFCR = STM32_DMA_ISR_MASK << 24;
+ if (dma_isr_redir[6].dma_func)
+ dma_isr_redir[6].dma_func(dma_isr_redir[6].dma_param, flags);
+
+ OSAL_IRQ_EPILOGUE();
+}
+
+/**
+ * @brief DMA2 stream 1 shared interrupt handler.
+ *
+ * @isr
+ */
+OSAL_IRQ_HANDLER(Vector120) {
+ uint32_t flags;
+
+ OSAL_IRQ_PROLOGUE();
+
+ flags = (DMA2->ISR >> 0) & STM32_DMA_ISR_MASK;
+ DMA2->IFCR = STM32_DMA_ISR_MASK << 0;
+ if (dma_isr_redir[7].dma_func)
+ dma_isr_redir[7].dma_func(dma_isr_redir[7].dma_param, flags);
+
+ OSAL_IRQ_EPILOGUE();
+}
+
+/**
+ * @brief DMA2 stream 2 shared interrupt handler.
+ *
+ * @isr
+ */
+OSAL_IRQ_HANDLER(Vector124) {
+ uint32_t flags;
+
+ OSAL_IRQ_PROLOGUE();
+
+ flags = (DMA2->ISR >> 4) & STM32_DMA_ISR_MASK;
+ DMA2->IFCR = STM32_DMA_ISR_MASK << 4;
+ if (dma_isr_redir[8].dma_func)
+ dma_isr_redir[8].dma_func(dma_isr_redir[8].dma_param, flags);
+
+ OSAL_IRQ_EPILOGUE();
+}
+
+/**
+ * @brief DMA2 stream 3 shared interrupt handler.
+ *
+ * @isr
+ */
+OSAL_IRQ_HANDLER(Vector128) {
+ uint32_t flags;
+
+ OSAL_IRQ_PROLOGUE();
+
+ flags = (DMA2->ISR >> 8) & STM32_DMA_ISR_MASK;
+ DMA2->IFCR = STM32_DMA_ISR_MASK << 8;
+ if (dma_isr_redir[9].dma_func)
+ dma_isr_redir[9].dma_func(dma_isr_redir[9].dma_param, flags);
+
+ OSAL_IRQ_EPILOGUE();
+}
+
+/**
+ * @brief DMA2 stream 4 shared interrupt handler.
+ *
+ * @isr
+ */
+OSAL_IRQ_HANDLER(Vector12C) {
+ uint32_t flags;
+
+ OSAL_IRQ_PROLOGUE();
+
+ flags = (DMA2->ISR >> 12) & STM32_DMA_ISR_MASK;
+ DMA2->IFCR = STM32_DMA_ISR_MASK << 12;
+ if (dma_isr_redir[10].dma_func)
+ dma_isr_redir[10].dma_func(dma_isr_redir[10].dma_param, flags);
+
+ OSAL_IRQ_EPILOGUE();
+}
+
+/**
+ * @brief DMA2 stream 5 shared interrupt handler.
+ *
+ * @isr
+ */
+OSAL_IRQ_HANDLER(Vector130) {
+ uint32_t flags;
+
+ OSAL_IRQ_PROLOGUE();
+
+ flags = (DMA2->ISR >> 16) & STM32_DMA_ISR_MASK;
+ DMA2->IFCR = STM32_DMA_ISR_MASK << 16;
+ if (dma_isr_redir[11].dma_func)
+ dma_isr_redir[11].dma_func(dma_isr_redir[11].dma_param, flags);
+
+ OSAL_IRQ_EPILOGUE();
+}
+
+/*===========================================================================*/
+/* Driver exported functions. */
+/*===========================================================================*/
+
+/**
+ * @brief STM32 DMA helper initialization.
+ *
+ * @init
+ */
+void dmaInit(void) {
+ int i;
+
+ dma_streams_mask = 0;
+ for (i = 0; i < STM32_DMA_STREAMS; i++) {
+ _stm32_dma_streams[i].channel->CCR = 0;
+ dma_isr_redir[i].dma_func = NULL;
+ }
+ DMA1->IFCR = 0xFFFFFFFF;
+#if STM32_HAS_DMA2
+ DMA2->IFCR = 0xFFFFFFFF;
+#endif
+}
+
+/**
+ * @brief Allocates a DMA stream.
+ * @details The stream is allocated and, if required, the DMA clock enabled.
+ * The function also enables the IRQ vector associated to the stream
+ * and initializes its priority.
+ * @pre The stream must not be already in use or an error is returned.
+ * @post The stream is allocated and the default ISR handler redirected
+ * to the specified function.
+ * @post The stream ISR vector is enabled and its priority configured.
+ * @post The stream must be freed using @p dmaStreamRelease() before it can
+ * be reused with another peripheral.
+ * @post The stream is in its post-reset state.
+ * @note This function can be invoked in both ISR or thread context.
+ *
+ * @param[in] dmastp pointer to a stm32_dma_stream_t structure
+ * @param[in] priority IRQ priority mask for the DMA stream
+ * @param[in] func handling function pointer, can be @p NULL
+ * @param[in] param a parameter to be passed to the handling function
+ * @return The operation status.
+ * @retval FALSE no error, stream taken.
+ * @retval TRUE error, stream already taken.
+ *
+ * @special
+ */
+bool_t dmaStreamAllocate(const stm32_dma_stream_t *dmastp,
+ uint32_t priority,
+ stm32_dmaisr_t func,
+ void *param) {
+
+ osalDbgCheck(dmastp != NULL);
+
+ /* Checks if the stream is already taken.*/
+ if ((dma_streams_mask & (1 << dmastp->selfindex)) != 0)
+ return TRUE;
+
+ /* Marks the stream as allocated.*/
+ dma_isr_redir[dmastp->selfindex].dma_func = func;
+ dma_isr_redir[dmastp->selfindex].dma_param = param;
+ dma_streams_mask |= (1 << dmastp->selfindex);
+
+ /* Enabling DMA clocks required by the current streams set.*/
+ if ((dma_streams_mask & STM32_DMA1_STREAMS_MASK) != 0)
+ rccEnableDMA1(FALSE);
+#if STM32_HAS_DMA2
+ if ((dma_streams_mask & STM32_DMA2_STREAMS_MASK) != 0)
+ rccEnableDMA2(FALSE);
+#endif
+
+ /* Putting the stream in a safe state.*/
+ dmaStreamDisable(dmastp);
+ dmastp->channel->CCR = STM32_DMA_CCR_RESET_VALUE;
+
+ /* Enables the associated IRQ vector if a callback is defined.*/
+ if (func != NULL)
+ nvicEnableVector(dmastp->vector, priority);
+
+ return FALSE;
+}
+
+/**
+ * @brief Releases a DMA stream.
+ * @details The stream is freed and, if required, the DMA clock disabled.
+ * Trying to release a unallocated stream is an illegal operation
+ * and is trapped if assertions are enabled.
+ * @pre The stream must have been allocated using @p dmaStreamAllocate().
+ * @post The stream is again available.
+ * @note This function can be invoked in both ISR or thread context.
+ *
+ * @param[in] dmastp pointer to a stm32_dma_stream_t structure
+ *
+ * @special
+ */
+void dmaStreamRelease(const stm32_dma_stream_t *dmastp) {
+
+ osalDbgCheck(dmastp != NULL);
+
+ /* Check if the streams is not taken.*/
+ osalDbgAssert((dma_streams_mask & (1 << dmastp->selfindex)) != 0,
+ "dmaStreamRelease(), #1", "not allocated");
+
+ /* Disables the associated IRQ vector.*/
+ nvicDisableVector(dmastp->vector);
+
+ /* Marks the stream as not allocated.*/
+ dma_streams_mask &= ~(1 << dmastp->selfindex);
+
+ /* Shutting down clocks that are no more required, if any.*/
+ if ((dma_streams_mask & STM32_DMA1_STREAMS_MASK) == 0)
+ rccDisableDMA1(FALSE);
+#if STM32_HAS_DMA2
+ if ((dma_streams_mask & STM32_DMA2_STREAMS_MASK) == 0)
+ rccDisableDMA2(FALSE);
+#endif
+}
+
+#endif /* STM32_DMA_REQUIRED */
+
+/** @} */
diff --git a/os/hal/platforms/STM32F30x/stm32_dma.h b/os/hal/platforms/STM32F30x/stm32_dma.h new file mode 100644 index 000000000..2415f00f2 --- /dev/null +++ b/os/hal/platforms/STM32F30x/stm32_dma.h @@ -0,0 +1,406 @@ +/*
+ ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+/**
+ * @file STM32F30x/stm32_dma.h
+ * @brief DMA helper driver header.
+ * @note This file requires definitions from the ST header file stm32f30x.h.
+ * @note This driver uses the new naming convention used for the STM32F2xx
+ * so the "DMA channels" are referred as "DMA streams".
+ *
+ * @addtogroup STM32F30x_DMA
+ * @{
+ */
+
+#ifndef _STM32_DMA_H_
+#define _STM32_DMA_H_
+
+/*===========================================================================*/
+/* Driver constants. */
+/*===========================================================================*/
+
+/**
+ * @brief Total number of DMA streams.
+ * @note This is the total number of streams among all the DMA units.
+ */
+#if STM32_HAS_DMA2 || defined(__DOXYGEN__)
+#define STM32_DMA_STREAMS 12
+#else
+#define STM32_DMA_STREAMS 7
+#endif
+
+/**
+ * @brief Mask of the ISR bits passed to the DMA callback functions.
+ */
+#define STM32_DMA_ISR_MASK 0x0F
+
+/**
+ * @brief Returns the channel associated to the specified stream.
+ *
+ * @param[in] n the stream number (0...STM32_DMA_STREAMS-1)
+ * @param[in] c a stream/channel association word, one channel per
+ * nibble, not associated channels must be set to 0xF
+ * @return Always zero, in this platform there is no dynamic
+ * association between streams and channels.
+ */
+#define STM32_DMA_GETCHANNEL(n, c) 0
+
+/**
+ * @brief Checks if a DMA priority is within the valid range.
+ * @param[in] prio DMA priority
+ *
+ * @retval The check result.
+ * @retval FALSE invalid DMA priority.
+ * @retval TRUE correct DMA priority.
+ */
+#define STM32_DMA_IS_VALID_PRIORITY(prio) (((prio) >= 0) && ((prio) <= 3))
+
+/**
+ * @brief Returns an unique numeric identifier for a DMA stream.
+ *
+ * @param[in] dma the DMA unit number
+ * @param[in] stream the stream number
+ * @return An unique numeric stream identifier.
+ */
+#define STM32_DMA_STREAM_ID(dma, stream) ((((dma) - 1) * 7) + ((stream) - 1))
+
+/**
+ * @brief Returns a DMA stream identifier mask.
+ *
+ *
+ * @param[in] dma the DMA unit number
+ * @param[in] stream the stream number
+ * @return A DMA stream identifier mask.
+ */
+#define STM32_DMA_STREAM_ID_MSK(dma, stream) \
+ (1 << STM32_DMA_STREAM_ID(dma, stream))
+
+/**
+ * @brief Checks if a DMA stream unique identifier belongs to a mask.
+ * @param[in] id the stream numeric identifier
+ * @param[in] mask the stream numeric identifiers mask
+ *
+ * @retval The check result.
+ * @retval FALSE id does not belong to the mask.
+ * @retval TRUE id belongs to the mask.
+ */
+#define STM32_DMA_IS_VALID_ID(id, mask) (((1 << (id)) & (mask)))
+
+/**
+ * @name DMA streams identifiers
+ * @{
+ */
+/**
+ * @brief Returns a pointer to a stm32_dma_stream_t structure.
+ *
+ * @param[in] id the stream numeric identifier
+ * @return A pointer to the stm32_dma_stream_t constant structure
+ * associated to the DMA stream.
+ */
+#define STM32_DMA_STREAM(id) (&_stm32_dma_streams[id])
+
+#define STM32_DMA1_STREAM1 STM32_DMA_STREAM(0)
+#define STM32_DMA1_STREAM2 STM32_DMA_STREAM(1)
+#define STM32_DMA1_STREAM3 STM32_DMA_STREAM(2)
+#define STM32_DMA1_STREAM4 STM32_DMA_STREAM(3)
+#define STM32_DMA1_STREAM5 STM32_DMA_STREAM(4)
+#define STM32_DMA1_STREAM6 STM32_DMA_STREAM(5)
+#define STM32_DMA1_STREAM7 STM32_DMA_STREAM(6)
+#define STM32_DMA2_STREAM1 STM32_DMA_STREAM(7)
+#define STM32_DMA2_STREAM2 STM32_DMA_STREAM(8)
+#define STM32_DMA2_STREAM3 STM32_DMA_STREAM(9)
+#define STM32_DMA2_STREAM4 STM32_DMA_STREAM(10)
+#define STM32_DMA2_STREAM5 STM32_DMA_STREAM(11)
+/** @} */
+
+/**
+ * @name CR register constants common to all DMA types
+ * @{
+ */
+#define STM32_DMA_CR_EN DMA_CCR_EN
+#define STM32_DMA_CR_TEIE DMA_CCR_TEIE
+#define STM32_DMA_CR_HTIE DMA_CCR_HTIE
+#define STM32_DMA_CR_TCIE DMA_CCR_TCIE
+#define STM32_DMA_CR_DIR_MASK (DMA_CCR_DIR | DMA_CCR_MEM2MEM)
+#define STM32_DMA_CR_DIR_P2M 0
+#define STM32_DMA_CR_DIR_M2P DMA_CCR_DIR
+#define STM32_DMA_CR_DIR_M2M DMA_CCR_MEM2MEM
+#define STM32_DMA_CR_CIRC DMA_CCR_CIRC
+#define STM32_DMA_CR_PINC DMA_CCR_PINC
+#define STM32_DMA_CR_MINC DMA_CCR_MINC
+#define STM32_DMA_CR_PSIZE_MASK DMA_CCR_PSIZE
+#define STM32_DMA_CR_PSIZE_BYTE 0
+#define STM32_DMA_CR_PSIZE_HWORD DMA_CCR_PSIZE_0
+#define STM32_DMA_CR_PSIZE_WORD DMA_CCR_PSIZE_1
+#define STM32_DMA_CR_MSIZE_MASK DMA_CCR_MSIZE
+#define STM32_DMA_CR_MSIZE_BYTE 0
+#define STM32_DMA_CR_MSIZE_HWORD DMA_CCR_MSIZE_0
+#define STM32_DMA_CR_MSIZE_WORD DMA_CCR_MSIZE_1
+#define STM32_DMA_CR_SIZE_MASK (STM32_DMA_CR_PSIZE_MASK | \
+ STM32_DMA_CR_MSIZE_MASK)
+#define STM32_DMA_CR_PL_MASK DMA_CCR_PL
+#define STM32_DMA_CR_PL(n) ((n) << 12)
+/** @} */
+
+/**
+ * @name CR register constants only found in enhanced DMA
+ * @{
+ */
+#define STM32_DMA_CR_DMEIE 0 /**< @brief Ignored by normal DMA. */
+#define STM32_DMA_CR_CHSEL_MASK 0 /**< @brief Ignored by normal DMA. */
+#define STM32_DMA_CR_CHSEL(n) 0 /**< @brief Ignored by normal DMA. */
+/** @} */
+
+/**
+ * @name Status flags passed to the ISR callbacks
+ * @{
+ */
+#define STM32_DMA_ISR_FEIF 0
+#define STM32_DMA_ISR_DMEIF 0
+#define STM32_DMA_ISR_TEIF DMA_ISR_TEIF1
+#define STM32_DMA_ISR_HTIF DMA_ISR_HTIF1
+#define STM32_DMA_ISR_TCIF DMA_ISR_TCIF1
+/** @} */
+
+/*===========================================================================*/
+/* Driver pre-compile time settings. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Derived constants and error checks. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver data structures and types. */
+/*===========================================================================*/
+
+/**
+ * @brief STM32 DMA stream descriptor structure.
+ */
+typedef struct {
+ DMA_Channel_TypeDef *channel; /**< @brief Associated DMA channel. */
+ volatile uint32_t *ifcr; /**< @brief Associated IFCR reg. */
+ uint8_t ishift; /**< @brief Bits offset in xIFCR
+ register. */
+ uint8_t selfindex; /**< @brief Index to self in array. */
+ uint8_t vector; /**< @brief Associated IRQ vector. */
+} stm32_dma_stream_t;
+
+/**
+ * @brief STM32 DMA ISR function type.
+ *
+ * @param[in] p parameter for the registered function
+ * @param[in] flags pre-shifted content of the ISR register, the bits
+ * are aligned to bit zero
+ */
+typedef void (*stm32_dmaisr_t)(void *p, uint32_t flags);
+
+/*===========================================================================*/
+/* Driver macros. */
+/*===========================================================================*/
+
+/**
+ * @name Macro Functions
+ * @{
+ */
+/**
+ * @brief Associates a peripheral data register to a DMA stream.
+ * @note This function can be invoked in both ISR or thread context.
+ * @pre The stream must have been allocated using @p dmaStreamAllocate().
+ * @post After use the stream can be released using @p dmaStreamRelease().
+ *
+ * @param[in] dmastp pointer to a stm32_dma_stream_t structure
+ * @param[in] addr value to be written in the CPAR register
+ *
+ * @special
+ */
+#define dmaStreamSetPeripheral(dmastp, addr) { \
+ (dmastp)->channel->CPAR = (uint32_t)(addr); \
+}
+
+/**
+ * @brief Associates a memory destination to a DMA stream.
+ * @note This function can be invoked in both ISR or thread context.
+ * @pre The stream must have been allocated using @p dmaStreamAllocate().
+ * @post After use the stream can be released using @p dmaStreamRelease().
+ *
+ * @param[in] dmastp pointer to a stm32_dma_stream_t structure
+ * @param[in] addr value to be written in the CMAR register
+ *
+ * @special
+ */
+#define dmaStreamSetMemory0(dmastp, addr) { \
+ (dmastp)->channel->CMAR = (uint32_t)(addr); \
+}
+
+/**
+ * @brief Sets the number of transfers to be performed.
+ * @note This function can be invoked in both ISR or thread context.
+ * @pre The stream must have been allocated using @p dmaStreamAllocate().
+ * @post After use the stream can be released using @p dmaStreamRelease().
+ *
+ * @param[in] dmastp pointer to a stm32_dma_stream_t structure
+ * @param[in] size value to be written in the CNDTR register
+ *
+ * @special
+ */
+#define dmaStreamSetTransactionSize(dmastp, size) { \
+ (dmastp)->channel->CNDTR = (uint32_t)(size); \
+}
+
+/**
+ * @brief Returns the number of transfers to be performed.
+ * @note This function can be invoked in both ISR or thread context.
+ * @pre The stream must have been allocated using @p dmaStreamAllocate().
+ * @post After use the stream can be released using @p dmaStreamRelease().
+ *
+ * @param[in] dmastp pointer to a stm32_dma_stream_t structure
+ * @return The number of transfers to be performed.
+ *
+ * @special
+ */
+#define dmaStreamGetTransactionSize(dmastp) ((size_t)((dmastp)->channel->CNDTR))
+
+/**
+ * @brief Programs the stream mode settings.
+ * @note This function can be invoked in both ISR or thread context.
+ * @pre The stream must have been allocated using @p dmaStreamAllocate().
+ * @post After use the stream can be released using @p dmaStreamRelease().
+ *
+ * @param[in] dmastp pointer to a stm32_dma_stream_t structure
+ * @param[in] mode value to be written in the CCR register
+ *
+ * @special
+ */
+#define dmaStreamSetMode(dmastp, mode) { \
+ (dmastp)->channel->CCR = (uint32_t)(mode); \
+}
+
+/**
+ * @brief DMA stream enable.
+ * @note This function can be invoked in both ISR or thread context.
+ * @pre The stream must have been allocated using @p dmaStreamAllocate().
+ * @post After use the stream can be released using @p dmaStreamRelease().
+ *
+ * @param[in] dmastp pointer to a stm32_dma_stream_t structure
+ *
+ * @special
+ */
+#define dmaStreamEnable(dmastp) { \
+ (dmastp)->channel->CCR |= STM32_DMA_CR_EN; \
+}
+
+/**
+ * @brief DMA stream disable.
+ * @details The function disables the specified stream and then clears any
+ * pending interrupt.
+ * @note This function can be invoked in both ISR or thread context.
+ * @note Interrupts enabling flags are set to zero after this call, see
+ * bug 3607518.
+ * @pre The stream must have been allocated using @p dmaStreamAllocate().
+ * @post After use the stream can be released using @p dmaStreamRelease().
+ *
+ * @param[in] dmastp pointer to a stm32_dma_stream_t structure
+ *
+ * @special
+ */
+#define dmaStreamDisable(dmastp) { \
+ (dmastp)->channel->CCR &= ~(STM32_DMA_CR_TCIE | STM32_DMA_CR_HTIE | \
+ STM32_DMA_CR_TEIE | STM32_DMA_CR_EN); \
+ dmaStreamClearInterrupt(dmastp); \
+}
+
+/**
+ * @brief DMA stream interrupt sources clear.
+ * @note This function can be invoked in both ISR or thread context.
+ * @pre The stream must have been allocated using @p dmaStreamAllocate().
+ * @post After use the stream can be released using @p dmaStreamRelease().
+ *
+ * @param[in] dmastp pointer to a stm32_dma_stream_t structure
+ *
+ * @special
+ */
+#define dmaStreamClearInterrupt(dmastp) { \
+ *(dmastp)->ifcr = STM32_DMA_ISR_MASK << (dmastp)->ishift; \
+}
+
+/**
+ * @brief Starts a memory to memory operation using the specified stream.
+ * @note The default transfer data mode is "byte to byte" but it can be
+ * changed by specifying extra options in the @p mode parameter.
+ * @pre The stream must have been allocated using @p dmaStreamAllocate().
+ * @post After use the stream can be released using @p dmaStreamRelease().
+ *
+ * @param[in] dmastp pointer to a stm32_dma_stream_t structure
+ * @param[in] mode value to be written in the CCR register, this value
+ * is implicitly ORed with:
+ * - @p STM32_DMA_CR_MINC
+ * - @p STM32_DMA_CR_PINC
+ * - @p STM32_DMA_CR_DIR_M2M
+ * - @p STM32_DMA_CR_EN
+ * .
+ * @param[in] src source address
+ * @param[in] dst destination address
+ * @param[in] n number of data units to copy
+ */
+#define dmaStartMemCopy(dmastp, mode, src, dst, n) { \
+ dmaStreamSetPeripheral(dmastp, src); \
+ dmaStreamSetMemory0(dmastp, dst); \
+ dmaStreamSetTransactionSize(dmastp, n); \
+ dmaStreamSetMode(dmastp, (mode) | \
+ STM32_DMA_CR_MINC | STM32_DMA_CR_PINC | \
+ STM32_DMA_CR_DIR_M2M | STM32_DMA_CR_EN); \
+}
+
+/**
+ * @brief Polled wait for DMA transfer end.
+ * @pre The stream must have been allocated using @p dmaStreamAllocate().
+ * @post After use the stream can be released using @p dmaStreamRelease().
+ *
+ * @param[in] dmastp pointer to a stm32_dma_stream_t structure
+ */
+#define dmaWaitCompletion(dmastp) { \
+ while ((dmastp)->channel->CNDTR > 0) \
+ ; \
+ dmaStreamDisable(dmastp); \
+}
+
+/** @} */
+
+/*===========================================================================*/
+/* External declarations. */
+/*===========================================================================*/
+
+#if !defined(__DOXYGEN__)
+extern const stm32_dma_stream_t _stm32_dma_streams[STM32_DMA_STREAMS];
+#endif
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+ void dmaInit(void);
+ bool_t dmaStreamAllocate(const stm32_dma_stream_t *dmastp,
+ uint32_t priority,
+ stm32_dmaisr_t func,
+ void *param);
+ void dmaStreamRelease(const stm32_dma_stream_t *dmastp);
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* _STM32_DMA_H_ */
+
+/** @} */
diff --git a/os/hal/platforms/STM32F30x/stm32_isr.h b/os/hal/platforms/STM32F30x/stm32_isr.h new file mode 100644 index 000000000..94b04b63e --- /dev/null +++ b/os/hal/platforms/STM32F30x/stm32_isr.h @@ -0,0 +1,132 @@ +/*
+ ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+/**
+ * @file STM32F30x/stm32_isr.h
+ * @brief ISR remapper driver header.
+ *
+ * @addtogroup STM32F30x_ISR
+ * @{
+ */
+
+#ifndef _STM32_ISR_H_
+#define _STM32_ISR_H_
+
+/*===========================================================================*/
+/* Driver constants. */
+/*===========================================================================*/
+
+/**
+ * @name ISR names and numbers remapping
+ * @{
+ */
+/*
+ * CAN units.
+ */
+#define STM32_CAN1_TX_HANDLER Vector8C
+#define STM32_CAN1_RX0_HANDLER Vector90
+#define STM32_CAN1_RX1_HANDLER Vector94
+#define STM32_CAN1_SCE_HANDLER Vector98
+
+#define STM32_CAN1_TX_NUMBER 19
+#define STM32_CAN1_RX0_NUMBER 20
+#define STM32_CAN1_RX1_NUMBER 21
+#define STM32_CAN1_SCE_NUMBER 22
+
+/*
+ * I2C units.
+ */
+#define STM32_I2C1_EVENT_HANDLER VectorBC
+#define STM32_I2C1_ERROR_HANDLER VectorC0
+#define STM32_I2C1_EVENT_NUMBER 31
+#define STM32_I2C1_ERROR_NUMBER 32
+
+#define STM32_I2C2_EVENT_HANDLER VectorC4
+#define STM32_I2C2_ERROR_HANDLER VectorC8
+#define STM32_I2C2_EVENT_NUMBER 33
+#define STM32_I2C2_ERROR_NUMBER 34
+
+/*
+ * TIM units.
+ */
+#define STM32_TIM1_UP_HANDLER VectorA4
+#define STM32_TIM1_CC_HANDLER VectorAC
+#define STM32_TIM2_HANDLER VectorB0
+#define STM32_TIM3_HANDLER VectorB4
+#define STM32_TIM4_HANDLER VectorB8
+#define STM32_TIM6_HANDLER Vector118
+#define STM32_TIM7_HANDLER Vector11C
+#define STM32_TIM8_UP_HANDLER VectorF0
+#define STM32_TIM8_CC_HANDLER VectorF8
+
+#define STM32_TIM1_UP_NUMBER 25
+#define STM32_TIM1_CC_NUMBER 27
+#define STM32_TIM2_NUMBER 28
+#define STM32_TIM3_NUMBER 29
+#define STM32_TIM4_NUMBER 30
+#define STM32_TIM6_NUMBER 54
+#define STM32_TIM7_NUMBER 55
+#define STM32_TIM8_UP_NUMBER 44
+#define STM32_TIM8_CC_NUMBER 46
+
+/*
+ * USART units.
+ */
+#define STM32_USART1_HANDLER VectorD4
+#define STM32_USART2_HANDLER VectorD8
+#define STM32_USART3_HANDLER VectorDC
+#define STM32_UART4_HANDLER Vector110
+#define STM32_UART5_HANDLER Vector114
+
+#define STM32_USART1_NUMBER 37
+#define STM32_USART2_NUMBER 38
+#define STM32_USART3_NUMBER 39
+#define STM32_UART4_NUMBER 52
+#define STM32_UART5_NUMBER 53
+
+/*
+ * USB units.
+ */
+#define STM32_USB1_HP_HANDLER Vector168
+#define STM32_USB1_LP_HANDLER Vector16C
+
+#define STM32_USB1_HP_NUMBER 74
+#define STM32_USB1_LP_NUMBER 75
+/** @} */
+
+/*===========================================================================*/
+/* Driver pre-compile time settings. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Derived constants and error checks. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver data structures and types. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver macros. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* External declarations. */
+/*===========================================================================*/
+
+#endif /* _STM32_ISR_H_ */
+
+/** @} */
diff --git a/os/hal/platforms/STM32F30x/stm32_rcc.h b/os/hal/platforms/STM32F30x/stm32_rcc.h new file mode 100644 index 000000000..9cc2edf52 --- /dev/null +++ b/os/hal/platforms/STM32F30x/stm32_rcc.h @@ -0,0 +1,835 @@ +/*
+ ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+/**
+ * @file STM32F30x/stm32_rcc.h
+ * @brief RCC helper driver header.
+ * @note This file requires definitions from the ST header file
+ * @p stm32f30x.h.
+ *
+ * @addtogroup STM32F30x_RCC
+ * @{
+ */
+
+#ifndef _STM32_RCC_
+#define _STM32_RCC_
+
+/*===========================================================================*/
+/* Driver constants. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver pre-compile time settings. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Derived constants and error checks. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver data structures and types. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver macros. */
+/*===========================================================================*/
+
+/**
+ * @name Generic RCC operations
+ * @{
+ */
+/**
+ * @brief Enables the clock of one or more peripheral on the APB1 bus.
+ *
+ * @param[in] mask APB1 peripherals mask
+ * @param[in] lp low power enable flag
+ *
+ * @api
+ */
+#define rccEnableAPB1(mask, lp) { \
+ RCC->APB1ENR |= (mask); \
+}
+
+/**
+ * @brief Disables the clock of one or more peripheral on the APB1 bus.
+ *
+ * @param[in] mask APB1 peripherals mask
+ * @param[in] lp low power enable flag
+ *
+ * @api
+ */
+#define rccDisableAPB1(mask, lp) { \
+ RCC->APB1ENR &= ~(mask); \
+}
+
+/**
+ * @brief Resets one or more peripheral on the APB1 bus.
+ *
+ * @param[in] mask APB1 peripherals mask
+ *
+ * @api
+ */
+#define rccResetAPB1(mask) { \
+ RCC->APB1RSTR |= (mask); \
+ RCC->APB1RSTR = 0; \
+}
+
+/**
+ * @brief Enables the clock of one or more peripheral on the APB2 bus.
+ *
+ * @param[in] mask APB2 peripherals mask
+ * @param[in] lp low power enable flag
+ *
+ * @api
+ */
+#define rccEnableAPB2(mask, lp) { \
+ RCC->APB2ENR |= (mask); \
+}
+
+/**
+ * @brief Disables the clock of one or more peripheral on the APB2 bus.
+ *
+ * @param[in] mask APB2 peripherals mask
+ * @param[in] lp low power enable flag
+ *
+ * @api
+ */
+#define rccDisableAPB2(mask, lp) { \
+ RCC->APB2ENR &= ~(mask); \
+}
+
+/**
+ * @brief Resets one or more peripheral on the APB2 bus.
+ *
+ * @param[in] mask APB2 peripherals mask
+ *
+ * @api
+ */
+#define rccResetAPB2(mask) { \
+ RCC->APB2RSTR |= (mask); \
+ RCC->APB2RSTR = 0; \
+}
+
+/**
+ * @brief Enables the clock of one or more peripheral on the AHB bus.
+ *
+ * @param[in] mask AHB peripherals mask
+ * @param[in] lp low power enable flag
+ *
+ * @api
+ */
+#define rccEnableAHB(mask, lp) { \
+ RCC->AHBENR |= (mask); \
+}
+
+/**
+ * @brief Disables the clock of one or more peripheral on the AHB bus.
+ *
+ * @param[in] mask AHB peripherals mask
+ * @param[in] lp low power enable flag
+ *
+ * @api
+ */
+#define rccDisableAHB(mask, lp) { \
+ RCC->AHBENR &= ~(mask); \
+}
+
+/**
+ * @brief Resets one or more peripheral on the AHB bus.
+ *
+ * @param[in] mask AHB peripherals mask
+ *
+ * @api
+ */
+#define rccResetAHB(mask) { \
+ RCC->AHBRSTR |= (mask); \
+ RCC->AHBRSTR = 0; \
+}
+/** @} */
+
+/**
+ * @name ADC peripherals specific RCC operations
+ * @{
+ */
+/**
+ * @brief Enables the ADC1/ADC2 peripheral clock.
+ *
+ * @param[in] lp low power enable flag
+ *
+ * @api
+ */
+#define rccEnableADC12(lp) rccEnableAHB(RCC_AHBENR_ADC12EN, lp)
+
+/**
+ * @brief Disables the ADC1/ADC2 peripheral clock.
+ *
+ * @param[in] lp low power enable flag
+ *
+ * @api
+ */
+#define rccDisableADC12(lp) rccDisableAHB(RCC_AHBENR_ADC12EN, lp)
+
+/**
+ * @brief Resets the ADC1/ADC2 peripheral.
+ *
+ * @api
+ */
+#define rccResetADC12() rccResetAHB(RCC_AHBRSTR_ADC12RST)
+
+/**
+ * @brief Enables the ADC3/ADC4 peripheral clock.
+ *
+ * @param[in] lp low power enable flag
+ *
+ * @api
+ */
+#define rccEnableADC34(lp) rccEnableAHB(RCC_AHBENR_ADC34EN, lp)
+
+/**
+ * @brief Disables the ADC3/ADC4 peripheral clock.
+ *
+ * @param[in] lp low power enable flag
+ *
+ * @api
+ */
+#define rccDisableADC34(lp) rccDisableAHB(RCC_AHBENR_ADC34EN, lp)
+
+/**
+ * @brief Resets the ADC3/ADC4 peripheral.
+ *
+ * @api
+ */
+#define rccResetADC34() rccResetAHB(RCC_AHBRSTR_ADC34RST)
+/** @} */
+
+/**
+ * @name CAN peripherals specific RCC operations
+ * @{
+ */
+/**
+ * @brief Enables the CAN1 peripheral clock.
+ * @note The @p lp parameter is ignored in this family.
+ *
+ * @param[in] lp low power enable flag
+ *
+ * @api
+ */
+#define rccEnableCAN1(lp) rccEnableAPB1(RCC_APB1ENR_CAN1EN, lp)
+
+/**
+ * @brief Disables the CAN1 peripheral clock.
+ * @note The @p lp parameter is ignored in this family.
+ *
+ * @param[in] lp low power enable flag
+ *
+ * @api
+ */
+#define rccDisableCAN1(lp) rccDisableAPB1(RCC_APB1ENR_CAN1EN, lp)
+
+/**
+ * @brief Resets the CAN1 peripheral.
+ *
+ * @api
+ */
+#define rccResetCAN1() rccResetAPB1(RCC_APB1RSTR_CAN1RST)
+/** @} */
+
+/**
+ * @name DMA peripheral specific RCC operations
+ * @{
+ */
+/**
+ * @brief Enables the DMA1 peripheral clock.
+ *
+ * @param[in] lp low power enable flag
+ *
+ * @api
+ */
+#define rccEnableDMA1(lp) rccEnableAHB(RCC_AHBENR_DMA1EN, lp)
+
+/**
+ * @brief Disables the DMA1 peripheral clock.
+ *
+ * @param[in] lp low power enable flag
+ *
+ * @api
+ */
+#define rccDisableDMA1(lp) rccDisableAHB(RCC_AHBENR_DMA1EN, lp)
+
+/**
+ * @brief Resets the DMA1 peripheral.
+ *
+ * @api
+ */
+#define rccResetDMA1() rccResetAHB(RCC_AHBRSTR_DMA1RST)
+
+/**
+ * @brief Enables the DMA2 peripheral clock.
+ *
+ * @param[in] lp low power enable flag
+ *
+ * @api
+ */
+#define rccEnableDMA2(lp) rccEnableAHB(RCC_AHBENR_DMA2EN, lp)
+
+/**
+ * @brief Disables the DMA2 peripheral clock.
+ *
+ * @param[in] lp low power enable flag
+ *
+ * @api
+ */
+#define rccDisableDMA2(lp) rccDisableAHB(RCC_AHBENR_DMA2EN, lp)
+
+/**
+ * @brief Resets the DMA2 peripheral.
+ *
+ * @api
+ */
+#define rccResetDMA2() rccResetAHB(RCC_AHBRSTR_DMA2RST)
+/** @} */
+
+/**
+ * @name PWR interface specific RCC operations
+ * @{
+ */
+/**
+ * @brief Enables the PWR interface clock.
+ * @note The @p lp parameter is ignored in this family.
+ *
+ * @param[in] lp low power enable flag
+ *
+ * @api
+ */
+#define rccEnablePWRInterface(lp) rccEnableAPB1(RCC_APB1ENR_PWREN, lp)
+
+/**
+ * @brief Disables PWR interface clock.
+ * @note The @p lp parameter is ignored in this family.
+ *
+ * @param[in] lp low power enable flag
+ *
+ * @api
+ */
+#define rccDisablePWRInterface(lp) rccDisableAPB1(RCC_APB1ENR_PWREN, lp)
+
+/**
+ * @brief Resets the PWR interface.
+ *
+ * @api
+ */
+#define rccResetPWRInterface() rccResetAPB1(RCC_APB1RSTR_PWRRST)
+/** @} */
+
+/**
+ * @name I2C peripherals specific RCC operations
+ * @{
+ */
+/**
+ * @brief Enables the I2C1 peripheral clock.
+ *
+ * @param[in] lp low power enable flag
+ *
+ * @api
+ */
+#define rccEnableI2C1(lp) rccEnableAPB1(RCC_APB1ENR_I2C1EN, lp)
+
+/**
+ * @brief Disables the I2C1 peripheral clock.
+ *
+ * @param[in] lp low power enable flag
+ *
+ * @api
+ */
+#define rccDisableI2C1(lp) rccDisableAPB1(RCC_APB1ENR_I2C1EN, lp)
+
+/**
+ * @brief Resets the I2C1 peripheral.
+ *
+ * @api
+ */
+#define rccResetI2C1() rccResetAPB1(RCC_APB1RSTR_I2C1RST)
+
+/**
+ * @brief Enables the I2C2 peripheral clock.
+ *
+ * @param[in] lp low power enable flag
+ *
+ * @api
+ */
+#define rccEnableI2C2(lp) rccEnableAPB1(RCC_APB1ENR_I2C2EN, lp)
+
+/**
+ * @brief Disables the I2C2 peripheral clock.
+ *
+ * @param[in] lp low power enable flag
+ *
+ * @api
+ */
+#define rccDisableI2C2(lp) rccDisableAPB1(RCC_APB1ENR_I2C2EN, lp)
+
+/**
+ * @brief Resets the I2C2 peripheral.
+ *
+ * @api
+ */
+#define rccResetI2C2() rccResetAPB1(RCC_APB1RSTR_I2C2RST)
+/** @} */
+
+/**
+ * @name SPI peripherals specific RCC operations
+ * @{
+ */
+/**
+ * @brief Enables the SPI1 peripheral clock.
+ *
+ * @param[in] lp low power enable flag
+ *
+ * @api
+ */
+#define rccEnableSPI1(lp) rccEnableAPB2(RCC_APB2ENR_SPI1EN, lp)
+
+/**
+ * @brief Disables the SPI1 peripheral clock.
+ *
+ * @param[in] lp low power enable flag
+ *
+ * @api
+ */
+#define rccDisableSPI1(lp) rccDisableAPB2(RCC_APB2ENR_SPI1EN, lp)
+
+/**
+ * @brief Resets the SPI1 peripheral.
+ *
+ * @api
+ */
+#define rccResetSPI1() rccResetAPB2(RCC_APB2RSTR_SPI1RST)
+
+/**
+ * @brief Enables the SPI2 peripheral clock.
+ *
+ * @param[in] lp low power enable flag
+ *
+ * @api
+ */
+#define rccEnableSPI2(lp) rccEnableAPB1(RCC_APB1ENR_SPI2EN, lp)
+
+/**
+ * @brief Disables the SPI2 peripheral clock.
+ *
+ * @param[in] lp low power enable flag
+ *
+ * @api
+ */
+#define rccDisableSPI2(lp) rccDisableAPB1(RCC_APB1ENR_SPI2EN, lp)
+
+/**
+ * @brief Resets the SPI2 peripheral.
+ *
+ * @api
+ */
+#define rccResetSPI2() rccResetAPB1(RCC_APB1RSTR_SPI2RST)
+
+/**
+ * @brief Enables the SPI3 peripheral clock.
+ * @note The @p lp parameter is ignored in this family.
+ *
+ * @param[in] lp low power enable flag
+ *
+ * @api
+ */
+#define rccEnableSPI3(lp) rccEnableAPB1(RCC_APB1ENR_SPI3EN, lp)
+
+/**
+ * @brief Disables the SPI3 peripheral clock.
+ * @note The @p lp parameter is ignored in this family.
+ *
+ * @param[in] lp low power enable flag
+ *
+ * @api
+ */
+#define rccDisableSPI3(lp) rccDisableAPB1(RCC_APB1ENR_SPI3EN, lp)
+
+/**
+ * @brief Resets the SPI3 peripheral.
+ *
+ * @api
+ */
+#define rccResetSPI3() rccResetAPB1(RCC_APB1RSTR_SPI3RST)
+/** @} */
+
+/**
+ * @name TIM peripherals specific RCC operations
+ * @{
+ */
+/**
+ * @brief Enables the TIM1 peripheral clock.
+ * @note The @p lp parameter is ignored in this family.
+ *
+ * @param[in] lp low power enable flag
+ *
+ * @api
+ */
+#define rccEnableTIM1(lp) rccEnableAPB2(RCC_APB2ENR_TIM1EN, lp)
+
+/**
+ * @brief Disables the TIM1 peripheral clock.
+ * @note The @p lp parameter is ignored in this family.
+ *
+ * @param[in] lp low power enable flag
+ *
+ * @api
+ */
+#define rccDisableTIM1(lp) rccDisableAPB2(RCC_APB2ENR_TIM1EN, lp)
+
+/**
+ * @brief Resets the TIM1 peripheral.
+ *
+ * @api
+ */
+#define rccResetTIM1() rccResetAPB2(RCC_APB2RSTR_TIM1RST)
+
+/**
+ * @brief Enables the TIM2 peripheral clock.
+ *
+ * @param[in] lp low power enable flag
+ *
+ * @api
+ */
+#define rccEnableTIM2(lp) rccEnableAPB1(RCC_APB1ENR_TIM2EN, lp)
+
+/**
+ * @brief Disables the TIM2 peripheral clock.
+ *
+ * @param[in] lp low power enable flag
+ *
+ * @api
+ */
+#define rccDisableTIM2(lp) rccDisableAPB1(RCC_APB1ENR_TIM2EN, lp)
+
+/**
+ * @brief Resets the TIM2 peripheral.
+ *
+ * @api
+ */
+#define rccResetTIM2() rccResetAPB1(RCC_APB1RSTR_TIM2RST)
+
+/**
+ * @brief Enables the TIM3 peripheral clock.
+ *
+ * @param[in] lp low power enable flag
+ *
+ * @api
+ */
+#define rccEnableTIM3(lp) rccEnableAPB1(RCC_APB1ENR_TIM3EN, lp)
+
+/**
+ * @brief Disables the TIM3 peripheral clock.
+ *
+ * @param[in] lp low power enable flag
+ *
+ * @api
+ */
+#define rccDisableTIM3(lp) rccDisableAPB1(RCC_APB1ENR_TIM3EN, lp)
+
+/**
+ * @brief Resets the TIM3 peripheral.
+ *
+ * @api
+ */
+#define rccResetTIM3() rccResetAPB1(RCC_APB1RSTR_TIM3RST)
+
+/**
+ * @brief Enables the TIM4 peripheral clock.
+ *
+ * @param[in] lp low power enable flag
+ *
+ * @api
+ */
+#define rccEnableTIM4(lp) rccEnableAPB1(RCC_APB1ENR_TIM4EN, lp)
+
+/**
+ * @brief Disables the TIM4 peripheral clock.
+ *
+ * @param[in] lp low power enable flag
+ *
+ * @api
+ */
+#define rccDisableTIM4(lp) rccDisableAPB1(RCC_APB1ENR_TIM4EN, lp)
+
+/**
+ * @brief Resets the TIM4 peripheral.
+ *
+ * @api
+ */
+#define rccResetTIM4() rccResetAPB1(RCC_APB1RSTR_TIM4RST)
+
+/**
+ * @brief Enables the TIM6 peripheral clock.
+ *
+ * @param[in] lp low power enable flag
+ *
+ * @api
+ */
+#define rccEnableTIM6(lp) rccEnableAPB1(RCC_APB1ENR_TIM6EN, lp)
+
+/**
+ * @brief Disables the TIM6 peripheral clock.
+ *
+ * @param[in] lp low power enable flag
+ *
+ * @api
+ */
+#define rccDisableTIM6(lp) rccDisableAPB1(RCC_APB1ENR_TIM6EN, lp)
+
+/**
+ * @brief Resets the TIM6 peripheral.
+ *
+ * @api
+ */
+#define rccResetTIM6() rccResetAPB1(RCC_APB1RSTR_TIM6RST)
+
+/**
+ * @brief Enables the TIM7 peripheral clock.
+ *
+ * @param[in] lp low power enable flag
+ *
+ * @api
+ */
+#define rccEnableTIM7(lp) rccEnableAPB1(RCC_APB1ENR_TIM7EN, lp)
+
+/**
+ * @brief Disables the TIM7 peripheral clock.
+ *
+ * @param[in] lp low power enable flag
+ *
+ * @api
+ */
+#define rccDisableTIM7(lp) rccDisableAPB1(RCC_APB1ENR_TIM7EN, lp)
+
+/**
+ * @brief Resets the TIM7 peripheral.
+ *
+ * @api
+ */
+#define rccResetTIM7() rccResetAPB1(RCC_APB1RSTR_TIM7RST)
+
+/**
+ * @brief Enables the TIM8 peripheral clock.
+ * @note The @p lp parameter is ignored in this family.
+ *
+ * @param[in] lp low power enable flag
+ *
+ * @api
+ */
+#define rccEnableTIM8(lp) rccEnableAPB2(RCC_APB2ENR_TIM8EN, lp)
+
+/**
+ * @brief Disables the TIM8 peripheral clock.
+ * @note The @p lp parameter is ignored in this family.
+ *
+ * @param[in] lp low power enable flag
+ *
+ * @api
+ */
+#define rccDisableTIM8(lp) rccDisableAPB2(RCC_APB2ENR_TIM8EN, lp)
+
+/**
+ * @brief Resets the TIM8 peripheral.
+ *
+ * @api
+ */
+#define rccResetTIM8() rccResetAPB2(RCC_APB2RSTR_TIM8RST)
+/** @} */
+
+/**
+ * @name USART/UART peripherals specific RCC operations
+ * @{
+ */
+/**
+ * @brief Enables the USART1 peripheral clock.
+ *
+ * @param[in] lp low power enable flag
+ *
+ * @api
+ */
+#define rccEnableUSART1(lp) rccEnableAPB2(RCC_APB2ENR_USART1EN, lp)
+
+/**
+ * @brief Disables the USART1 peripheral clock.
+ *
+ * @param[in] lp low power enable flag
+ *
+ * @api
+ */
+#define rccDisableUSART1(lp) rccDisableAPB2(RCC_APB2ENR_USART1EN, lp)
+
+/**
+ * @brief Resets the USART1 peripheral.
+ *
+ * @api
+ */
+#define rccResetUSART1() rccResetAPB2(RCC_APB2RSTR_USART1RST)
+
+/**
+ * @brief Enables the USART2 peripheral clock.
+ *
+ * @param[in] lp low power enable flag
+ *
+ * @api
+ */
+#define rccEnableUSART2(lp) rccEnableAPB1(RCC_APB1ENR_USART2EN, lp)
+
+/**
+ * @brief Disables the USART2 peripheral clock.
+ *
+ * @param[in] lp low power enable flag
+ *
+ * @api
+ */
+#define rccDisableUSART2(lp) rccDisableAPB1(RCC_APB1ENR_USART2EN, lp)
+
+/**
+ * @brief Resets the USART2 peripheral.
+ *
+ * @api
+ */
+#define rccResetUSART2() rccResetAPB1(RCC_APB1RSTR_USART2RST)
+
+/**
+ * @brief Enables the USART3 peripheral clock.
+ *
+ * @param[in] lp low power enable flag
+ *
+ * @api
+ */
+#define rccEnableUSART3(lp) rccEnableAPB1(RCC_APB1ENR_USART3EN, lp)
+
+/**
+ * @brief Disables the USART3 peripheral clock.
+ *
+ * @param[in] lp low power enable flag
+ *
+ * @api
+ */
+#define rccDisableUSART3(lp) rccDisableAPB1(RCC_APB1ENR_USART3EN, lp)
+
+/**
+ * @brief Resets the USART3 peripheral.
+ *
+ * @api
+ */
+#define rccResetUSART3() rccResetAPB1(RCC_APB1RSTR_USART3RST)
+
+/**
+ * @brief Enables the UART4 peripheral clock.
+ * @note The @p lp parameter is ignored in this family.
+ *
+ * @param[in] lp low power enable flag
+ *
+ * @api
+ */
+#define rccEnableUART4(lp) rccEnableAPB1(RCC_APB1ENR_UART4EN, lp)
+
+/**
+ * @brief Disables the UART4 peripheral clock.
+ * @note The @p lp parameter is ignored in this family.
+ *
+ * @param[in] lp low power enable flag
+ *
+ * @api
+ */
+#define rccDisableUART4(lp) rccDisableAPB1(RCC_APB1ENR_UART4EN, lp)
+
+/**
+ * @brief Resets the UART4 peripheral.
+ *
+ * @api
+ */
+#define rccResetUART4() rccResetAPB1(RCC_APB1RSTR_UART4RST)
+
+/**
+ * @brief Enables the UART5 peripheral clock.
+ * @note The @p lp parameter is ignored in this family.
+ *
+ * @param[in] lp low power enable flag
+ *
+ * @api
+ */
+#define rccEnableUART5(lp) rccEnableAPB1(RCC_APB1ENR_UART5EN, lp)
+
+/**
+ * @brief Disables the UART5 peripheral clock.
+ * @note The @p lp parameter is ignored in this family.
+ *
+ * @param[in] lp low power enable flag
+ *
+ * @api
+ */
+#define rccDisableUART5(lp) rccDisableAPB1(RCC_APB1ENR_UART5EN, lp)
+
+/**
+ * @brief Resets the UART5 peripheral.
+ *
+ * @api
+ */
+#define rccResetUART5() rccResetAPB1(RCC_APB1RSTR_UART5RST)
+/** @} */
+
+/**
+ * @name USB peripheral specific RCC operations
+ * @{
+ */
+/**
+ * @brief Enables the USB peripheral clock.
+ *
+ * @param[in] lp low power enable flag
+ *
+ * @api
+ */
+#define rccEnableUSB(lp) rccEnableAPB1(RCC_APB1ENR_USBEN, lp)
+
+/**
+ * @brief Disables the USB peripheral clock.
+ *
+ * @param[in] lp low power enable flag
+ *
+ * @api
+ */
+#define rccDisableUSB(lp) rccDisableAPB1(RCC_APB1ENR_USBEN, lp)
+
+/**
+ * @brief Resets the USB peripheral.
+ *
+ * @api
+ */
+#define rccResetUSB() rccResetAPB1(RCC_APB1RSTR_USBRST)
+/** @} */
+
+/*===========================================================================*/
+/* External declarations. */
+/*===========================================================================*/
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* _STM32_RCC_ */
+
+/** @} */
diff --git a/os/hal/platforms/STM32F30x/stm32_registry.h b/os/hal/platforms/STM32F30x/stm32_registry.h new file mode 100644 index 000000000..20d3dc62b --- /dev/null +++ b/os/hal/platforms/STM32F30x/stm32_registry.h @@ -0,0 +1,234 @@ +/*
+ ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+/**
+ * @file STM32F30x/stm32_registry.h
+ * @brief STM32F30x capabilities registry.
+ *
+ * @addtogroup HAL
+ * @{
+ */
+
+#ifndef _STM32_REGISTRY_H_
+#define _STM32_REGISTRY_H_
+
+/*===========================================================================*/
+/* Platform capabilities. */
+/*===========================================================================*/
+
+/**
+ * @name STM32F30x capabilities
+ * @{
+ */
+/* ADC attributes.*/
+#define STM32_HAS_ADC1 TRUE
+#define STM32_ADC1_DMA_MSK (STM32_DMA_STREAM_ID_MSK(1, 1))
+#define STM32_ADC1_DMA_CHN 0x00000000
+
+#define STM32_HAS_ADC2 TRUE
+#define STM32_ADC2_DMA_MSK (STM32_DMA_STREAM_ID_MSK(2, 1) | \
+ STM32_DMA_STREAM_ID_MSK(2, 3))
+#define STM32_ADC2_DMA_CHN 0x00000000
+
+#define STM32_HAS_ADC3 TRUE
+#define STM32_ADC3_DMA_MSK (STM32_DMA_STREAM_ID_MSK(2, 5))
+#define STM32_ADC3_DMA_CHN 0x00000000
+
+#define STM32_HAS_ADC4 TRUE
+#define STM32_ADC4_DMA_MSK (STM32_DMA_STREAM_ID_MSK(2, 2) | \
+ STM32_DMA_STREAM_ID_MSK(2, 4))
+#define STM32_ADC4_DMA_CHN 0x00000000
+
+#define STM32_HAS_SDADC1 FALSE
+#define STM32_HAS_SDADC2 FALSE
+#define STM32_HAS_SDADC3 FALSE
+
+/* CAN attributes.*/
+#define STM32_HAS_CAN1 TRUE
+#define STM32_HAS_CAN2 FALSE
+#define STM32_CAN_MAX_FILTERS 14
+
+/* DAC attributes.*/
+#define STM32_HAS_DAC1 TRUE
+#define STM32_HAS_DAC2 TRUE
+
+/* DMA attributes.*/
+#define STM32_ADVANCED_DMA FALSE
+#define STM32_HAS_DMA1 TRUE
+#define STM32_HAS_DMA2 TRUE
+
+/* ETH attributes.*/
+#define STM32_HAS_ETH FALSE
+
+/* EXTI attributes.*/
+#define STM32_EXTI_NUM_CHANNELS 34
+
+/* GPIO attributes.*/
+#define STM32_HAS_GPIOA TRUE
+#define STM32_HAS_GPIOB TRUE
+#define STM32_HAS_GPIOC TRUE
+#define STM32_HAS_GPIOD TRUE
+#define STM32_HAS_GPIOE TRUE
+#define STM32_HAS_GPIOF TRUE
+#define STM32_HAS_GPIOG FALSE
+#define STM32_HAS_GPIOH FALSE
+#define STM32_HAS_GPIOI FALSE
+
+/* I2C attributes.*/
+#define STM32_HAS_I2C1 TRUE
+#define STM32_I2C1_RX_DMA_MSK (STM32_DMA_STREAM_ID_MSK(1, 7))
+#define STM32_I2C1_RX_DMA_CHN 0x00000000
+#define STM32_I2C1_TX_DMA_MSK (STM32_DMA_STREAM_ID_MSK(1, 6))
+#define STM32_I2C1_TX_DMA_CHN 0x00000000
+
+#define STM32_HAS_I2C2 TRUE
+#define STM32_I2C2_RX_DMA_MSK (STM32_DMA_STREAM_ID_MSK(1, 5))
+#define STM32_I2C2_RX_DMA_CHN 0x00000000
+#define STM32_I2C2_TX_DMA_MSK (STM32_DMA_STREAM_ID_MSK(1, 4))
+#define STM32_I2C2_TX_DMA_CHN 0x00000000
+
+#define STM32_HAS_I2C3 FALSE
+#define STM32_I2C3_RX_DMA_MSK 0
+#define STM32_I2C3_RX_DMA_CHN 0x00000000
+#define STM32_I2C3_TX_DMA_MSK 0
+#define STM32_I2C3_TX_DMA_CHN 0x00000000
+
+/* RTC attributes.*/
+#define STM32_HAS_RTC TRUE
+#define STM32_RTC_HAS_SUBSECONDS TRUE
+#define STM32_RTC_IS_CALENDAR TRUE
+
+/* SDIO attributes.*/
+#define STM32_HAS_SDIO FALSE
+
+/* SPI attributes.*/
+#define STM32_HAS_SPI1 TRUE
+#define STM32_SPI1_RX_DMA_MSK STM32_DMA_STREAM_ID_MSK(1, 2)
+#define STM32_SPI1_RX_DMA_CHN 0x00000000
+#define STM32_SPI1_TX_DMA_MSK STM32_DMA_STREAM_ID_MSK(1, 3)
+#define STM32_SPI1_TX_DMA_CHN 0x00000000
+
+#define STM32_HAS_SPI2 TRUE
+#define STM32_SPI2_RX_DMA_MSK STM32_DMA_STREAM_ID_MSK(1, 4)
+#define STM32_SPI2_RX_DMA_CHN 0x00000000
+#define STM32_SPI2_TX_DMA_MSK STM32_DMA_STREAM_ID_MSK(1, 5)
+#define STM32_SPI2_TX_DMA_CHN 0x00000000
+
+#define STM32_HAS_SPI3 TRUE
+#define STM32_SPI3_RX_DMA_MSK STM32_DMA_STREAM_ID_MSK(2, 1)
+#define STM32_SPI3_RX_DMA_CHN 0x00000000
+#define STM32_SPI3_TX_DMA_MSK STM32_DMA_STREAM_ID_MSK(2, 2)
+#define STM32_SPI3_TX_DMA_CHN 0x00000000
+
+/* TIM attributes.*/
+#define STM32_TIM_MAX_CHANNELS 6
+
+#define STM32_HAS_TIM1 TRUE
+#define STM32_TIM1_IS_32BITS FALSE
+#define STM32_TIM1_CHANNELS 6
+
+#define STM32_HAS_TIM2 TRUE
+#define STM32_TIM2_IS_32BITS TRUE
+#define STM32_TIM2_CHANNELS 4
+
+#define STM32_HAS_TIM3 TRUE
+#define STM32_TIM3_IS_32BITS FALSE
+#define STM32_TIM3_CHANNELS 4
+
+#define STM32_HAS_TIM4 TRUE
+#define STM32_TIM4_IS_32BITS FALSE
+#define STM32_TIM4_CHANNELS 4
+
+#define STM32_HAS_TIM6 TRUE
+#define STM32_TIM6_IS_32BITS FALSE
+#define STM32_TIM6_CHANNELS 0
+
+#define STM32_HAS_TIM7 TRUE
+#define STM32_TIM7_IS_32BITS FALSE
+#define STM32_TIM7_CHANNELS 0
+
+#define STM32_HAS_TIM8 TRUE
+#define STM32_TIM8_IS_32BITS FALSE
+#define STM32_TIM8_CHANNELS 6
+
+#define STM32_HAS_TIM15 TRUE
+#define STM32_TIM15_IS_32BITS FALSE
+#define STM32_TIM15_CHANNELS 2
+
+#define STM32_HAS_TIM16 TRUE
+#define STM32_TIM16_IS_32BITS FALSE
+#define STM32_TIM16_CHANNELS 2
+
+#define STM32_HAS_TIM17 TRUE
+#define STM32_TIM17_IS_32BITS FALSE
+#define STM32_TIM17_CHANNELS 2
+
+#define STM32_HAS_TIM5 FALSE
+#define STM32_HAS_TIM9 FALSE
+#define STM32_HAS_TIM10 FALSE
+#define STM32_HAS_TIM11 FALSE
+#define STM32_HAS_TIM12 FALSE
+#define STM32_HAS_TIM13 FALSE
+#define STM32_HAS_TIM14 FALSE
+#define STM32_HAS_TIM18 FALSE
+#define STM32_HAS_TIM19 FALSE
+
+/* USART attributes.*/
+#define STM32_HAS_USART1 TRUE
+#define STM32_USART1_RX_DMA_MSK (STM32_DMA_STREAM_ID_MSK(1, 5))
+#define STM32_USART1_RX_DMA_CHN 0x00000000
+#define STM32_USART1_TX_DMA_MSK (STM32_DMA_STREAM_ID_MSK(1, 4))
+#define STM32_USART1_TX_DMA_CHN 0x00000000
+
+#define STM32_HAS_USART2 TRUE
+#define STM32_USART2_RX_DMA_MSK (STM32_DMA_STREAM_ID_MSK(1, 6))
+#define STM32_USART2_RX_DMA_CHN 0x00000000
+#define STM32_USART2_TX_DMA_MSK (STM32_DMA_STREAM_ID_MSK(1, 7))
+#define STM32_USART2_TX_DMA_CHN 0x00000000
+
+#define STM32_HAS_USART3 TRUE
+#define STM32_USART3_RX_DMA_MSK (STM32_DMA_STREAM_ID_MSK(1, 3))
+#define STM32_USART3_RX_DMA_CHN 0x00000000
+#define STM32_USART3_TX_DMA_MSK (STM32_DMA_STREAM_ID_MSK(1, 2))
+#define STM32_USART3_TX_DMA_CHN 0x00000000
+
+#define STM32_HAS_UART4 TRUE
+#define STM32_UART4_RX_DMA_MSK (STM32_DMA_STREAM_ID_MSK(2, 3))
+#define STM32_UART4_RX_DMA_CHN 0x00000000
+#define STM32_UART4_TX_DMA_MSK (STM32_DMA_STREAM_ID_MSK(2, 5))
+#define STM32_UART4_TX_DMA_CHN 0x00000000
+
+#define STM32_HAS_UART5 TRUE
+#define STM32_UART5_RX_DMA_MSK 0
+#define STM32_UART5_RX_DMA_CHN 0x00000000
+#define STM32_UART5_TX_DMA_MSK 0
+#define STM32_UART5_TX_DMA_CHN 0x00000000
+
+#define STM32_HAS_USART6 FALSE
+#define STM32_USART6_RX_DMA_MSK 0
+#define STM32_USART6_RX_DMA_CHN 0x00000000
+#define STM32_USART6_TX_DMA_MSK 0
+#define STM32_USART6_TX_DMA_CHN 0x00000000
+
+/* USB attributes.*/
+#define STM32_HAS_USB TRUE
+#define STM32_HAS_OTG1 FALSE
+#define STM32_HAS_OTG2 FALSE
+/** @} */
+
+#endif /* _STM32_REGISTRY_H_ */
+
+/** @} */
diff --git a/os/hal/platforms/STM32F30x/stm32f30x.h b/os/hal/platforms/STM32F30x/stm32f30x.h new file mode 100644 index 000000000..99c6178ee --- /dev/null +++ b/os/hal/platforms/STM32F30x/stm32f30x.h @@ -0,0 +1,6213 @@ +/**
+ ******************************************************************************
+ * @file stm32f30x.h
+ * @author MCD Application Team
+ * @version V1.0.0
+ * @date 04-September-2012
+ * @brief CMSIS Cortex-M4 Device Peripheral Access Layer Header File.
+ * This file contains all the peripheral registers definitions, bits
+ * definitions and memory mapping for STM32F30x devices.
+ *
+ * The file is the unique include file that the application programmer
+ * is using in the C source code, usually in main.c. This file contains:
+ * - Configuration section that allows to select:
+ * - The device used in the target application
+ * - To use or not the peripheral’s drivers in application code(i.e.
+ * code will be based on direct access to peripheral’s registers
+ * rather than drivers API), this option is controlled by
+ * "#define USE_STDPERIPH_DRIVER"
+ * - To change few application-specific parameters such as the HSE
+ * crystal frequency
+ * - Data structures and the address mapping for all peripherals
+ * - Peripheral registers declarations and bits definition
+ * - Macros to access peripheral registers hardware
+ *
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT 2012 STMicroelectronics</center></h2>
+ *
+ * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
+ * You may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at:
+ *
+ * http://www.st.com/software_license_agreement_liberty_v2
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *
+ ******************************************************************************
+ */
+
+/** @addtogroup CMSIS
+ * @{
+ */
+
+/** @addtogroup stm32f30x
+ * @{
+ */
+
+#ifndef __STM32F30x_H
+#define __STM32F30x_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif /* __cplusplus */
+
+/** @addtogroup Library_configuration_section
+ * @{
+ */
+
+/* Uncomment the line below according to the target STM32 device used in your
+ application
+ */
+
+#if !defined (STM32F30X)
+ #define STM32F30X
+#endif
+
+/* Tip: To avoid modifying this file each time you need to switch between these
+ devices, you can define the device in your toolchain compiler preprocessor.
+ */
+
+#if !defined (STM32F30X)
+ #error "Please select first the target STM32F30X device used in your application (in stm32f30x.h file)"
+#endif
+
+#if !defined (USE_STDPERIPH_DRIVER)
+/**
+ * @brief Comment the line below if you will not use the peripherals drivers.
+ In this case, these drivers will not be included and the application code will
+ be based on direct access to peripherals registers
+ */
+ /*#define USE_STDPERIPH_DRIVER*/
+#endif /* USE_STDPERIPH_DRIVER */
+
+/**
+ * @brief In the following line adjust the value of External High Speed oscillator (HSE)
+ used in your application
+
+ Tip: To avoid modifying this file each time you need to use different HSE, you
+ can define the HSE value in your toolchain compiler preprocessor.
+ */
+#if !defined (HSE_VALUE)
+ #define HSE_VALUE ((uint32_t)8000000) /*!< Value of the External oscillator in Hz */
+#endif /* HSE_VALUE */
+
+/**
+ * @brief In the following line adjust the External High Speed oscillator (HSE) Startup
+ Timeout value
+ */
+#if !defined (HSE_STARTUP_TIMEOUT)
+ #define HSE_STARTUP_TIMEOUT ((uint16_t)0x0500) /*!< Time out for HSE start up */
+#endif /* HSE_STARTUP_TIMEOUT */
+
+/**
+ * @brief In the following line adjust the Internal High Speed oscillator (HSI) Startup
+ Timeout value
+ */
+#if !defined (HSI_STARTUP_TIMEOUT)
+ #define HSI_STARTUP_TIMEOUT ((uint16_t)0x0500) /*!< Time out for HSI start up */
+#endif /* HSI_STARTUP_TIMEOUT */
+
+#if !defined (HSI_VALUE)
+ #define HSI_VALUE ((uint32_t)8000000)
+#endif /* HSI_VALUE */ /*!< Value of the Internal High Speed oscillator in Hz.
+ The real value may vary depending on the variations
+ in voltage and temperature. */
+#if !defined (LSI_VALUE)
+ #define LSI_VALUE ((uint32_t)40000)
+#endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz
+ The real value may vary depending on the variations
+ in voltage and temperature. */
+#if !defined (LSE_VALUE)
+ #define LSE_VALUE ((uint32_t)32768) /*!< Value of the External Low Speed oscillator in Hz */
+#endif /* LSE_VALUE */
+
+
+/**
+ * @brief STM32F30x Standard Peripherals Library version number V1.0.0
+ */
+#define __STM32F30X_STDPERIPH_VERSION_MAIN (0x01) /*!< [31:24] main version */
+#define __STM32F30X_STDPERIPH_VERSION_SUB1 (0x00) /*!< [23:16] sub1 version */
+#define __STM32F30X_STDPERIPH_VERSION_SUB2 (0x00) /*!< [15:8] sub2 version */
+#define __STM32F30X_STDPERIPH_VERSION_RC (0x00) /*!< [7:0] release candidate */
+#define __STM32F30X_STDPERIPH_VERSION ( (__STM32F30X_STDPERIPH_VERSION_MAIN << 24)\
+ |(__STM32F30X_STDPERIPH_VERSION_SUB1 << 16)\
+ |(__STM32F30X_STDPERIPH_VERSION_SUB2 << 8)\
+ |(__STM32F30X_STDPERIPH_VERSION_RC))
+
+/**
+ * @}
+ */
+
+/** @addtogroup Configuration_section_for_CMSIS
+ * @{
+ */
+
+/**
+ * @brief Configuration of the Cortex-M4 Processor and Core Peripherals
+ */
+#define __CM4_REV 0x0001 /*!< Core revision r0p1 */
+#define __MPU_PRESENT 1 /*!< STM32F30X provide an MPU */
+#define __NVIC_PRIO_BITS 4 /*!< STM32F30X uses 4 Bits for the Priority Levels */
+#define __Vendor_SysTickConfig 0 /*!< Set to 1 if different SysTick Config is used */
+#define __FPU_PRESENT 1 /*!< STM32F30X provide an FPU */
+
+
+/**
+ * @brief STM32F30X Interrupt Number Definition, according to the selected device
+ * in @ref Library_configuration_section
+ */
+typedef enum IRQn
+{
+/****** Cortex-M4 Processor Exceptions Numbers ****************************************************************/
+ NonMaskableInt_IRQn = -14, /*!< 2 Non Maskable Interrupt */
+ MemoryManagement_IRQn = -12, /*!< 4 Cortex-M4 Memory Management Interrupt */
+ BusFault_IRQn = -11, /*!< 5 Cortex-M4 Bus Fault Interrupt */
+ UsageFault_IRQn = -10, /*!< 6 Cortex-M4 Usage Fault Interrupt */
+ SVCall_IRQn = -5, /*!< 11 Cortex-M4 SV Call Interrupt */
+ DebugMonitor_IRQn = -4, /*!< 12 Cortex-M4 Debug Monitor Interrupt */
+ PendSV_IRQn = -2, /*!< 14 Cortex-M4 Pend SV Interrupt */
+ SysTick_IRQn = -1, /*!< 15 Cortex-M4 System Tick Interrupt */
+/****** STM32 specific Interrupt Numbers **********************************************************************/
+ WWDG_IRQn = 0, /*!< Window WatchDog Interrupt */
+ PVD_IRQn = 1, /*!< PVD through EXTI Line detection Interrupt */
+ TAMPER_STAMP_IRQn = 2, /*!< Tamper and TimeStamp interrupts */
+ RTC_WKUP_IRQn = 3, /*!< RTC Wakeup interrupt through the lines 17, 19 & 20 */
+ FLASH_IRQn = 4, /*!< FLASH global Interrupt */
+ RCC_IRQn = 5, /*!< RCC global Interrupt */
+ EXTI0_IRQn = 6, /*!< EXTI Line0 Interrupt */
+ EXTI1_IRQn = 7, /*!< EXTI Line1 Interrupt */
+ EXTI2_TS_IRQn = 8, /*!< EXTI Line2 Interrupt and Touch Sense Interrupt */
+ EXTI3_IRQn = 9, /*!< EXTI Line3 Interrupt */
+ EXTI4_IRQn = 10, /*!< EXTI Line4 Interrupt */
+ DMA1_Channel1_IRQn = 11, /*!< DMA1 Channel 1 Interrupt */
+ DMA1_Channel2_IRQn = 12, /*!< DMA1 Channel 2 Interrupt */
+ DMA1_Channel3_IRQn = 13, /*!< DMA1 Channel 3 Interrupt */
+ DMA1_Channel4_IRQn = 14, /*!< DMA1 Channel 4 Interrupt */
+ DMA1_Channel5_IRQn = 15, /*!< DMA1 Channel 5 Interrupt */
+ DMA1_Channel6_IRQn = 16, /*!< DMA1 Channel 6 Interrupt */
+ DMA1_Channel7_IRQn = 17, /*!< DMA1 Channel 7 Interrupt */
+ ADC1_2_IRQn = 18, /*!< ADC1 & ADC2 Interrupts */
+ USB_HP_CAN1_TX_IRQn = 19, /*!< USB Device High Priority or CAN1 TX Interrupts */
+ USB_LP_CAN1_RX0_IRQn = 20, /*!< USB Device Low Priority or CAN1 RX0 Interrupts */
+ CAN1_RX1_IRQn = 21, /*!< CAN1 RX1 Interrupt */
+ CAN1_SCE_IRQn = 22, /*!< CAN1 SCE Interrupt */
+ EXTI9_5_IRQn = 23, /*!< External Line[9:5] Interrupts */
+ TIM1_BRK_TIM15_IRQn = 24, /*!< TIM1 Break and TIM15 Interrupts */
+ TIM1_UP_TIM16_IRQn = 25, /*!< TIM1 Update and TIM16 Interrupts */
+ TIM1_TRG_COM_TIM17_IRQn = 26, /*!< TIM1 Trigger and Commutation and TIM17 Interrupt */
+ TIM1_CC_IRQn = 27, /*!< TIM1 Capture Compare Interrupt */
+ TIM2_IRQn = 28, /*!< TIM2 global Interrupt */
+ TIM3_IRQn = 29, /*!< TIM3 global Interrupt */
+ TIM4_IRQn = 30, /*!< TIM4 global Interrupt */
+ I2C1_EV_IRQn = 31, /*!< I2C1 Event Interrupt */
+ I2C1_ER_IRQn = 32, /*!< I2C1 Error Interrupt */
+ I2C2_EV_IRQn = 33, /*!< I2C2 Event Interrupt */
+ I2C2_ER_IRQn = 34, /*!< I2C2 Error Interrupt */
+ SPI1_IRQn = 35, /*!< SPI1 global Interrupt */
+ SPI2_IRQn = 36, /*!< SPI2 global Interrupt */
+ USART1_IRQn = 37, /*!< USART1 global Interrupt */
+ USART2_IRQn = 38, /*!< USART2 global Interrupt */
+ USART3_IRQn = 39, /*!< USART3 global Interrupt */
+ EXTI15_10_IRQn = 40, /*!< External Line[15:10] Interrupts */
+ RTC_Alarm_IRQn = 41, /*!< RTC Alarm (A and B) through EXTI Line Interrupt */
+ USBWakeUp_IRQn = 42, /*!< USB Wakeup Interrupt */
+ TIM8_BRK_IRQn = 43, /*!< TIM8 Break Interrupt */
+ TIM8_UP_IRQn = 44, /*!< TIM8 Update Interrupt */
+ TIM8_TRG_COM_IRQn = 45, /*!< TIM8 Trigger and Commutation Interrupt */
+ TIM8_CC_IRQn = 46, /*!< TIM8 Capture Compare Interrupt */
+ ADC3_IRQn = 47, /*!< ADC3 global Interrupt */
+ SPI3_IRQn = 51, /*!< SPI3 global Interrupt */
+ UART4_IRQn = 52, /*!< UART4 global Interrupt */
+ UART5_IRQn = 53, /*!< UART5 global Interrupt */
+ TIM6_DAC_IRQn = 54, /*!< TIM6 global and DAC1&2 underrun error interrupts */
+ TIM7_IRQn = 55, /*!< TIM7 global Interrupt */
+ DMA2_Channel1_IRQn = 56, /*!< DMA2 Channel 1 global Interrupt */
+ DMA2_Channel2_IRQn = 57, /*!< DMA2 Channel 2 global Interrupt */
+ DMA2_Channel3_IRQn = 58, /*!< DMA2 Channel 3 global Interrupt */
+ DMA2_Channel4_IRQn = 59, /*!< DMA2 Channel 4 global Interrupt */
+ DMA2_Channel5_IRQn = 60, /*!< DMA2 Channel 5 global Interrupt */
+ ADC4_IRQn = 61, /*!< ADC4 global Interrupt */
+ COMP1_2_3_IRQn = 64, /*!< COMP1, COMP2 and COMP3 global Interrupt */
+ COMP4_5_6_IRQn = 65, /*!< COMP5, COMP6 and COMP4 global Interrupt */
+ COMP7_IRQn = 66, /*!< COMP7 global Interrupt */
+ USB_HP_IRQn = 74, /*!< USB High Priority global Interrupt remap */
+ USB_LP_IRQn = 75, /*!< USB Low Priority global Interrupt remap */
+ USBWakeUp_RMP_IRQn = 76, /*!< USB Wakeup Interrupt remap */
+ FPU_IRQn = 81 /*!< Floating point Interrupt */
+} IRQn_Type;
+
+/**
+ * @}
+ */
+
+#include "core_cm4.h" /* Cortex-M4 processor and core peripherals */
+/* CHIBIOS FIX */
+/*#include "system_stm32f30x.h"*/ /* STM32F30x System Header */
+#include <stdint.h>
+
+/** @addtogroup Exported_types
+ * @{
+ */
+/*!< STM32F10x Standard Peripheral Library old types (maintained for legacy purpose) */
+typedef int32_t s32;
+typedef int16_t s16;
+typedef int8_t s8;
+
+typedef const int32_t sc32; /*!< Read Only */
+typedef const int16_t sc16; /*!< Read Only */
+typedef const int8_t sc8; /*!< Read Only */
+
+typedef __IO int32_t vs32;
+typedef __IO int16_t vs16;
+typedef __IO int8_t vs8;
+
+typedef __I int32_t vsc32; /*!< Read Only */
+typedef __I int16_t vsc16; /*!< Read Only */
+typedef __I int8_t vsc8; /*!< Read Only */
+
+typedef uint32_t u32;
+typedef uint16_t u16;
+typedef uint8_t u8;
+
+typedef const uint32_t uc32; /*!< Read Only */
+typedef const uint16_t uc16; /*!< Read Only */
+typedef const uint8_t uc8; /*!< Read Only */
+
+typedef __IO uint32_t vu32;
+typedef __IO uint16_t vu16;
+typedef __IO uint8_t vu8;
+
+typedef __I uint32_t vuc32; /*!< Read Only */
+typedef __I uint16_t vuc16; /*!< Read Only */
+typedef __I uint8_t vuc8; /*!< Read Only */
+
+typedef enum {RESET = 0, SET = !RESET} FlagStatus, ITStatus;
+
+typedef enum {DISABLE = 0, ENABLE = !DISABLE} FunctionalState;
+#define IS_FUNCTIONAL_STATE(STATE) (((STATE) == DISABLE) || ((STATE) == ENABLE))
+
+typedef enum {ERROR = 0, SUCCESS = !ERROR} ErrorStatus;
+
+/**
+ * @}
+ */
+
+/** @addtogroup Peripheral_registers_structures
+ * @{
+ */
+
+/**
+ * @brief Analog to Digital Converter
+ */
+
+typedef struct
+{
+ __IO uint32_t ISR; /*!< ADC Interrupt and Status Register, Address offset: 0x00 */
+ __IO uint32_t IER; /*!< ADC Interrupt Enable Register, Address offset: 0x04 */
+ __IO uint32_t CR; /*!< ADC control register, Address offset: 0x08 */
+ __IO uint32_t CFGR; /*!< ADC Configuration register, Address offset: 0x0C */
+ uint32_t RESERVED0; /*!< Reserved, 0x010 */
+ __IO uint32_t SMPR1; /*!< ADC sample time register 1, Address offset: 0x14 */
+ __IO uint32_t SMPR2; /*!< ADC sample time register 2, Address offset: 0x18 */
+ uint32_t RESERVED1; /*!< Reserved, 0x01C */
+ __IO uint32_t TR1; /*!< ADC watchdog threshold register 1, Address offset: 0x20 */
+ __IO uint32_t TR2; /*!< ADC watchdog threshold register 2, Address offset: 0x24 */
+ __IO uint32_t TR3; /*!< ADC watchdog threshold register 3, Address offset: 0x28 */
+ uint32_t RESERVED2; /*!< Reserved, 0x02C */
+ __IO uint32_t SQR1; /*!< ADC regular sequence register 1, Address offset: 0x30 */
+ __IO uint32_t SQR2; /*!< ADC regular sequence register 2, Address offset: 0x34 */
+ __IO uint32_t SQR3; /*!< ADC regular sequence register 3, Address offset: 0x38 */
+ __IO uint32_t SQR4; /*!< ADC regular sequence register 4, Address offset: 0x3C */
+ __IO uint32_t DR; /*!< ADC regular data register, Address offset: 0x40 */
+ uint32_t RESERVED3; /*!< Reserved, 0x044 */
+ uint32_t RESERVED4; /*!< Reserved, 0x048 */
+ __IO uint32_t JSQR; /*!< ADC injected sequence register, Address offset: 0x4C */
+ uint32_t RESERVED5[4]; /*!< Reserved, 0x050 - 0x05C */
+ __IO uint32_t OFR1; /*!< ADC offset register 1, Address offset: 0x60 */
+ __IO uint32_t OFR2; /*!< ADC offset register 2, Address offset: 0x64 */
+ __IO uint32_t OFR3; /*!< ADC offset register 3, Address offset: 0x68 */
+ __IO uint32_t OFR4; /*!< ADC offset register 4, Address offset: 0x6C */
+ uint32_t RESERVED6[4]; /*!< Reserved, 0x070 - 0x07C */
+ __IO uint32_t JDR1; /*!< ADC injected data register 1, Address offset: 0x80 */
+ __IO uint32_t JDR2; /*!< ADC injected data register 2, Address offset: 0x84 */
+ __IO uint32_t JDR3; /*!< ADC injected data register 3, Address offset: 0x88 */
+ __IO uint32_t JDR4; /*!< ADC injected data register 4, Address offset: 0x8C */
+ uint32_t RESERVED7[4]; /*!< Reserved, 0x090 - 0x09C */
+ __IO uint32_t AWD2CR; /*!< ADC Analog Watchdog 2 Configuration Register, Address offset: 0xA0 */
+ __IO uint32_t AWD3CR; /*!< ADC Analog Watchdog 3 Configuration Register, Address offset: 0xA4 */
+ uint32_t RESERVED8; /*!< Reserved, 0x0A8 */
+ uint32_t RESERVED9; /*!< Reserved, 0x0AC */
+ __IO uint32_t DIFSEL; /*!< ADC Differential Mode Selection Register, Address offset: 0xB0 */
+ __IO uint32_t CALFACT; /*!< ADC Calibration Factors, Address offset: 0xB4 */
+
+} ADC_TypeDef;
+
+typedef struct
+{
+ __IO uint32_t CSR; /*!< ADC Common status register, Address offset: ADC1/3 base address + 0x300 */
+ uint32_t RESERVED; /*!< Reserved, ADC1/3 base address + 0x304 */
+ __IO uint32_t CCR; /*!< ADC common control register, Address offset: ADC1/3 base address + 0x308 */
+ __IO uint32_t CDR; /*!< ADC common regular data register for dual
+ AND triple modes, Address offset: ADC1/3 base address + 0x30C */
+} ADC_Common_TypeDef;
+
+
+/**
+ * @brief Controller Area Network TxMailBox
+ */
+typedef struct
+{
+ __IO uint32_t TIR; /*!< CAN TX mailbox identifier register */
+ __IO uint32_t TDTR; /*!< CAN mailbox data length control and time stamp register */
+ __IO uint32_t TDLR; /*!< CAN mailbox data low register */
+ __IO uint32_t TDHR; /*!< CAN mailbox data high register */
+} CAN_TxMailBox_TypeDef;
+
+/**
+ * @brief Controller Area Network FIFOMailBox
+ */
+typedef struct
+{
+ __IO uint32_t RIR; /*!< CAN receive FIFO mailbox identifier register */
+ __IO uint32_t RDTR; /*!< CAN receive FIFO mailbox data length control and time stamp register */
+ __IO uint32_t RDLR; /*!< CAN receive FIFO mailbox data low register */
+ __IO uint32_t RDHR; /*!< CAN receive FIFO mailbox data high register */
+} CAN_FIFOMailBox_TypeDef;
+
+/**
+ * @brief Controller Area Network FilterRegister
+ */
+typedef struct
+{
+ __IO uint32_t FR1; /*!< CAN Filter bank register 1 */
+ __IO uint32_t FR2; /*!< CAN Filter bank register 1 */
+} CAN_FilterRegister_TypeDef;
+
+/**
+ * @brief Controller Area Network
+ */
+typedef struct
+{
+ __IO uint32_t MCR; /*!< CAN master control register, Address offset: 0x00 */
+ __IO uint32_t MSR; /*!< CAN master status register, Address offset: 0x04 */
+ __IO uint32_t TSR; /*!< CAN transmit status register, Address offset: 0x08 */
+ __IO uint32_t RF0R; /*!< CAN receive FIFO 0 register, Address offset: 0x0C */
+ __IO uint32_t RF1R; /*!< CAN receive FIFO 1 register, Address offset: 0x10 */
+ __IO uint32_t IER; /*!< CAN interrupt enable register, Address offset: 0x14 */
+ __IO uint32_t ESR; /*!< CAN error status register, Address offset: 0x18 */
+ __IO uint32_t BTR; /*!< CAN bit timing register, Address offset: 0x1C */
+ uint32_t RESERVED0[88]; /*!< Reserved, 0x020 - 0x17F */
+ CAN_TxMailBox_TypeDef sTxMailBox[3]; /*!< CAN Tx MailBox, Address offset: 0x180 - 0x1AC */
+ CAN_FIFOMailBox_TypeDef sFIFOMailBox[2]; /*!< CAN FIFO MailBox, Address offset: 0x1B0 - 0x1CC */
+ uint32_t RESERVED1[12]; /*!< Reserved, 0x1D0 - 0x1FF */
+ __IO uint32_t FMR; /*!< CAN filter master register, Address offset: 0x200 */
+ __IO uint32_t FM1R; /*!< CAN filter mode register, Address offset: 0x204 */
+ uint32_t RESERVED2; /*!< Reserved, 0x208 */
+ __IO uint32_t FS1R; /*!< CAN filter scale register, Address offset: 0x20C */
+ uint32_t RESERVED3; /*!< Reserved, 0x210 */
+ __IO uint32_t FFA1R; /*!< CAN filter FIFO assignment register, Address offset: 0x214 */
+ uint32_t RESERVED4; /*!< Reserved, 0x218 */
+ __IO uint32_t FA1R; /*!< CAN filter activation register, Address offset: 0x21C */
+ uint32_t RESERVED5[8]; /*!< Reserved, 0x220-0x23F */
+ CAN_FilterRegister_TypeDef sFilterRegister[28]; /*!< CAN Filter Register, Address offset: 0x240-0x31C */
+} CAN_TypeDef;
+
+
+/**
+ * @brief Analog Comparators
+ */
+
+typedef struct
+{
+ __IO uint32_t CSR; /*!< Comparator control Status register, Address offset: 0x00 */
+} COMP_TypeDef;
+
+/**
+ * @brief CRC calculation unit
+ */
+
+typedef struct
+{
+ __IO uint32_t DR; /*!< CRC Data register, Address offset: 0x00 */
+ __IO uint8_t IDR; /*!< CRC Independent data register, Address offset: 0x04 */
+ uint8_t RESERVED0; /*!< Reserved, 0x05 */
+ uint16_t RESERVED1; /*!< Reserved, 0x06 */
+ __IO uint32_t CR; /*!< CRC Control register, Address offset: 0x08 */
+ uint32_t RESERVED2; /*!< Reserved, 0x0C */
+ __IO uint32_t INIT; /*!< Initial CRC value register, Address offset: 0x10 */
+ __IO uint32_t POL; /*!< CRC polynomial register, Address offset: 0x14 */
+} CRC_TypeDef;
+
+/**
+ * @brief Digital to Analog Converter
+ */
+
+typedef struct
+{
+ __IO uint32_t CR; /*!< DAC control register, Address offset: 0x00 */
+ __IO uint32_t SWTRIGR; /*!< DAC software trigger register, Address offset: 0x04 */
+ __IO uint32_t DHR12R1; /*!< DAC channel1 12-bit right-aligned data holding register, Address offset: 0x08 */
+ __IO uint32_t DHR12L1; /*!< DAC channel1 12-bit left aligned data holding register, Address offset: 0x0C */
+ __IO uint32_t DHR8R1; /*!< DAC channel1 8-bit right aligned data holding register, Address offset: 0x10 */
+ __IO uint32_t DHR12R2; /*!< DAC channel2 12-bit right aligned data holding register, Address offset: 0x14 */
+ __IO uint32_t DHR12L2; /*!< DAC channel2 12-bit left aligned data holding register, Address offset: 0x18 */
+ __IO uint32_t DHR8R2; /*!< DAC channel2 8-bit right-aligned data holding register, Address offset: 0x1C */
+ __IO uint32_t DHR12RD; /*!< Dual DAC 12-bit right-aligned data holding register, Address offset: 0x20 */
+ __IO uint32_t DHR12LD; /*!< DUAL DAC 12-bit left aligned data holding register, Address offset: 0x24 */
+ __IO uint32_t DHR8RD; /*!< DUAL DAC 8-bit right aligned data holding register, Address offset: 0x28 */
+ __IO uint32_t DOR1; /*!< DAC channel1 data output register, Address offset: 0x2C */
+ __IO uint32_t DOR2; /*!< DAC channel2 data output register, Address offset: 0x30 */
+ __IO uint32_t SR; /*!< DAC status register, Address offset: 0x34 */
+} DAC_TypeDef;
+
+/**
+ * @brief Debug MCU
+ */
+
+typedef struct
+{
+ __IO uint32_t IDCODE; /*!< MCU device ID code, Address offset: 0x00 */
+ __IO uint32_t CR; /*!< Debug MCU configuration register, Address offset: 0x04 */
+ __IO uint32_t APB1FZ; /*!< Debug MCU APB1 freeze register, Address offset: 0x08 */
+ __IO uint32_t APB2FZ; /*!< Debug MCU APB2 freeze register, Address offset: 0x0C */
+}DBGMCU_TypeDef;
+
+/**
+ * @brief DMA Controller
+ */
+
+typedef struct
+{
+ __IO uint32_t CCR; /*!< DMA channel x configuration register */
+ __IO uint32_t CNDTR; /*!< DMA channel x number of data register */
+ __IO uint32_t CPAR; /*!< DMA channel x peripheral address register */
+ __IO uint32_t CMAR; /*!< DMA channel x memory address register */
+} DMA_Channel_TypeDef;
+
+typedef struct
+{
+ __IO uint32_t ISR; /*!< DMA interrupt status register, Address offset: 0x00 */
+ __IO uint32_t IFCR; /*!< DMA interrupt clear flag register, Address offset: 0x04 */
+} DMA_TypeDef;
+
+/**
+ * @brief External Interrupt/Event Controller
+ */
+
+typedef struct
+{
+ __IO uint32_t IMR; /*!< EXTI Interrupt mask register, Address offset: 0x00 */
+ __IO uint32_t EMR; /*!< EXTI Event mask register, Address offset: 0x04 */
+ __IO uint32_t RTSR; /*!< EXTI Rising trigger selection register, Address offset: 0x08 */
+ __IO uint32_t FTSR; /*!< EXTI Falling trigger selection register, Address offset: 0x0C */
+ __IO uint32_t SWIER; /*!< EXTI Software interrupt event register, Address offset: 0x10 */
+ __IO uint32_t PR; /*!< EXTI Pending register, Address offset: 0x14 */
+ uint32_t RESERVED1; /*!< Reserved, 0x18 */
+ uint32_t RESERVED2; /*!< Reserved, 0x1C */
+ __IO uint32_t IMR2; /*!< EXTI Interrupt mask register, Address offset: 0x20 */
+ __IO uint32_t EMR2; /*!< EXTI Event mask register, Address offset: 0x24 */
+ __IO uint32_t RTSR2; /*!< EXTI Rising trigger selection register, Address offset: 0x28 */
+ __IO uint32_t FTSR2; /*!< EXTI Falling trigger selection register, Address offset: 0x2C */
+ __IO uint32_t SWIER2; /*!< EXTI Software interrupt event register, Address offset: 0x30 */
+ __IO uint32_t PR2; /*!< EXTI Pending register, Address offset: 0x34 */
+}EXTI_TypeDef;
+
+/**
+ * @brief FLASH Registers
+ */
+
+typedef struct
+{
+ __IO uint32_t ACR; /*!< FLASH access control register, Address offset: 0x00 */
+ __IO uint32_t KEYR; /*!< FLASH key register, Address offset: 0x04 */
+ __IO uint32_t OPTKEYR; /*!< FLASH option key register, Address offset: 0x08 */
+ __IO uint32_t SR; /*!< FLASH status register, Address offset: 0x0C */
+ __IO uint32_t CR; /*!< FLASH control register, Address offset: 0x10 */
+ __IO uint32_t AR; /*!< FLASH address register, Address offset: 0x14 */
+ uint32_t RESERVED; /*!< Reserved, 0x18 */
+ __IO uint32_t OBR; /*!< FLASH Option byte register, Address offset: 0x1C */
+ __IO uint32_t WRPR; /*!< FLASH Write register, Address offset: 0x20 */
+
+} FLASH_TypeDef;
+
+/**
+ * @brief Option Bytes Registers
+ */
+typedef struct
+{
+ __IO uint16_t RDP; /*!<FLASH option byte Read protection, Address offset: 0x00 */
+ __IO uint16_t USER; /*!<FLASH option byte user options, Address offset: 0x02 */
+ uint16_t RESERVED0; /*!< Reserved, 0x04 */
+ uint16_t RESERVED1; /*!< Reserved, 0x06 */
+ __IO uint16_t WRP0; /*!<FLASH option byte write protection 0, Address offset: 0x08 */
+ __IO uint16_t WRP1; /*!<FLASH option byte write protection 1, Address offset: 0x0C */
+ __IO uint16_t WRP2; /*!<FLASH option byte write protection 2, Address offset: 0x10 */
+ __IO uint16_t WRP3; /*!<FLASH option byte write protection 3, Address offset: 0x12 */
+} OB_TypeDef;
+
+/**
+ * @brief General Purpose I/O
+ */
+/* CHIBIOS FIX */
+#if 0
+typedef struct
+{
+ __IO uint32_t MODER; /*!< GPIO port mode register, Address offset: 0x00 */
+ __IO uint16_t OTYPER; /*!< GPIO port output type register, Address offset: 0x04 */
+ uint16_t RESERVED0; /*!< Reserved, 0x06 */
+ __IO uint32_t OSPEEDR; /*!< GPIO port output speed register, Address offset: 0x08 */
+ __IO uint32_t PUPDR; /*!< GPIO port pull-up/pull-down register, Address offset: 0x0C */
+ __IO uint16_t IDR; /*!< GPIO port input data register, Address offset: 0x10 */
+ uint16_t RESERVED1; /*!< Reserved, 0x12 */
+ __IO uint16_t ODR; /*!< GPIO port output data register, Address offset: 0x14 */
+ uint16_t RESERVED2; /*!< Reserved, 0x16 */
+ __IO uint32_t BSRR; /*!< GPIO port bit set/reset registerBSRR, Address offset: 0x18 */
+ __IO uint32_t LCKR; /*!< GPIO port configuration lock register, Address offset: 0x1C */
+ __IO uint32_t AFR[2]; /*!< GPIO alternate function low register, Address offset: 0x20-0x24 */
+ __IO uint16_t BRR; /*!< GPIO bit reset register, Address offset: 0x28 */
+ uint16_t RESERVED3; /*!< Reserved, 0x2A */
+}GPIO_TypeDef;
+#endif
+
+/**
+ * @brief Operational Amplifier (OPAMP)
+ */
+
+typedef struct
+{
+ __IO uint32_t CSR; /*!< OPAMP control and status register, Address offset: 0x00 */
+} OPAMP_TypeDef;
+
+
+/**
+ * @brief System configuration controller
+ */
+
+typedef struct
+{
+ __IO uint32_t CFGR1; /*!< SYSCFG configuration register 1, Address offset: 0x00 */
+ __IO uint32_t RCR; /*!< SYSCFG CCM SRAM protection register, Address offset: 0x04 */
+ __IO uint32_t EXTICR[4]; /*!< SYSCFG external interrupt configuration registers, Address offset: 0x14-0x08 */
+ __IO uint32_t CFGR2; /*!< SYSCFG configuration register 2, Address offset: 0x18 */
+} SYSCFG_TypeDef;
+
+/**
+ * @brief Inter-integrated Circuit Interface
+ */
+
+typedef struct
+{
+ __IO uint32_t CR1; /*!< I2C Control register 1, Address offset: 0x00 */
+ __IO uint32_t CR2; /*!< I2C Control register 2, Address offset: 0x04 */
+ __IO uint32_t OAR1; /*!< I2C Own address 1 register, Address offset: 0x08 */
+ __IO uint32_t OAR2; /*!< I2C Own address 2 register, Address offset: 0x0C */
+ __IO uint32_t TIMINGR; /*!< I2C Timing register, Address offset: 0x10 */
+ __IO uint32_t TIMEOUTR; /*!< I2C Timeout register, Address offset: 0x14 */
+ __IO uint32_t ISR; /*!< I2C Interrupt and status register, Address offset: 0x18 */
+ __IO uint32_t ICR; /*!< I2C Interrupt clear register, Address offset: 0x1C */
+ __IO uint32_t PECR; /*!< I2C PEC register, Address offset: 0x20 */
+ __IO uint32_t RXDR; /*!< I2C Receive data register, Address offset: 0x24 */
+ __IO uint32_t TXDR; /*!< I2C Transmit data register, Address offset: 0x28 */
+}I2C_TypeDef;
+
+/**
+ * @brief Independent WATCHDOG
+ */
+
+typedef struct
+{
+ __IO uint32_t KR; /*!< IWDG Key register, Address offset: 0x00 */
+ __IO uint32_t PR; /*!< IWDG Prescaler register, Address offset: 0x04 */
+ __IO uint32_t RLR; /*!< IWDG Reload register, Address offset: 0x08 */
+ __IO uint32_t SR; /*!< IWDG Status register, Address offset: 0x0C */
+ __IO uint32_t WINR; /*!< IWDG Window register, Address offset: 0x10 */
+} IWDG_TypeDef;
+
+/**
+ * @brief Power Control
+ */
+
+typedef struct
+{
+ __IO uint32_t CR; /*!< PWR power control register, Address offset: 0x00 */
+ __IO uint32_t CSR; /*!< PWR power control/status register, Address offset: 0x04 */
+} PWR_TypeDef;
+
+/**
+ * @brief Reset and Clock Control
+ */
+typedef struct
+{
+ __IO uint32_t CR; /*!< RCC clock control register, Address offset: 0x00 */
+ __IO uint32_t CFGR; /*!< RCC clock configuration register, Address offset: 0x04 */
+ __IO uint32_t CIR; /*!< RCC clock interrupt register, Address offset: 0x08 */
+ __IO uint32_t APB2RSTR; /*!< RCC APB2 peripheral reset register, Address offset: 0x0C */
+ __IO uint32_t APB1RSTR; /*!< RCC APB1 peripheral reset register, Address offset: 0x10 */
+ __IO uint32_t AHBENR; /*!< RCC AHB peripheral clock register, Address offset: 0x14 */
+ __IO uint32_t APB2ENR; /*!< RCC APB2 peripheral clock enable register, Address offset: 0x18 */
+ __IO uint32_t APB1ENR; /*!< RCC APB1 peripheral clock enable register, Address offset: 0x1C */
+ __IO uint32_t BDCR; /*!< RCC Backup domain control register, Address offset: 0x20 */
+ __IO uint32_t CSR; /*!< RCC clock control & status register, Address offset: 0x24 */
+ __IO uint32_t AHBRSTR; /*!< RCC AHB peripheral reset register, Address offset: 0x28 */
+ __IO uint32_t CFGR2; /*!< RCC clock configuration register 2, Address offset: 0x2C */
+ __IO uint32_t CFGR3; /*!< RCC clock configuration register 3, Address offset: 0x30 */
+} RCC_TypeDef;
+
+/**
+ * @brief Real-Time Clock
+ */
+
+typedef struct
+{
+ __IO uint32_t TR; /*!< RTC time register, Address offset: 0x00 */
+ __IO uint32_t DR; /*!< RTC date register, Address offset: 0x04 */
+ __IO uint32_t CR; /*!< RTC control register, Address offset: 0x08 */
+ __IO uint32_t ISR; /*!< RTC initialization and status register, Address offset: 0x0C */
+ __IO uint32_t PRER; /*!< RTC prescaler register, Address offset: 0x10 */
+ __IO uint32_t WUTR; /*!< RTC wakeup timer register, Address offset: 0x14 */
+ uint32_t RESERVED0; /*!< Reserved, 0x18 */
+ __IO uint32_t ALRMAR; /*!< RTC alarm A register, Address offset: 0x1C */
+ __IO uint32_t ALRMBR; /*!< RTC alarm B register, Address offset: 0x20 */
+ __IO uint32_t WPR; /*!< RTC write protection register, Address offset: 0x24 */
+ __IO uint32_t SSR; /*!< RTC sub second register, Address offset: 0x28 */
+ __IO uint32_t SHIFTR; /*!< RTC shift control register, Address offset: 0x2C */
+ __IO uint32_t TSTR; /*!< RTC time stamp time register, Address offset: 0x30 */
+ __IO uint32_t TSDR; /*!< RTC time stamp date register, Address offset: 0x34 */
+ __IO uint32_t TSSSR; /*!< RTC time-stamp sub second register, Address offset: 0x38 */
+ __IO uint32_t CALR; /*!< RTC calibration register, Address offset: 0x3C */
+ __IO uint32_t TAFCR; /*!< RTC tamper and alternate function configuration register, Address offset: 0x40 */
+ __IO uint32_t ALRMASSR; /*!< RTC alarm A sub second register, Address offset: 0x44 */
+ __IO uint32_t ALRMBSSR; /*!< RTC alarm B sub second register, Address offset: 0x48 */
+ uint32_t RESERVED7; /*!< Reserved, 0x4C */
+ __IO uint32_t BKP0R; /*!< RTC backup register 0, Address offset: 0x50 */
+ __IO uint32_t BKP1R; /*!< RTC backup register 1, Address offset: 0x54 */
+ __IO uint32_t BKP2R; /*!< RTC backup register 2, Address offset: 0x58 */
+ __IO uint32_t BKP3R; /*!< RTC backup register 3, Address offset: 0x5C */
+ __IO uint32_t BKP4R; /*!< RTC backup register 4, Address offset: 0x60 */
+ __IO uint32_t BKP5R; /*!< RTC backup register 5, Address offset: 0x64 */
+ __IO uint32_t BKP6R; /*!< RTC backup register 6, Address offset: 0x68 */
+ __IO uint32_t BKP7R; /*!< RTC backup register 7, Address offset: 0x6C */
+ __IO uint32_t BKP8R; /*!< RTC backup register 8, Address offset: 0x70 */
+ __IO uint32_t BKP9R; /*!< RTC backup register 9, Address offset: 0x74 */
+ __IO uint32_t BKP10R; /*!< RTC backup register 10, Address offset: 0x78 */
+ __IO uint32_t BKP11R; /*!< RTC backup register 11, Address offset: 0x7C */
+ __IO uint32_t BKP12R; /*!< RTC backup register 12, Address offset: 0x80 */
+ __IO uint32_t BKP13R; /*!< RTC backup register 13, Address offset: 0x84 */
+ __IO uint32_t BKP14R; /*!< RTC backup register 14, Address offset: 0x88 */
+ __IO uint32_t BKP15R; /*!< RTC backup register 15, Address offset: 0x8C */
+} RTC_TypeDef;
+
+
+/**
+ * @brief Serial Peripheral Interface
+ */
+
+typedef struct
+{
+ __IO uint16_t CR1; /*!< SPI Control register 1 (not used in I2S mode), Address offset: 0x00 */
+ uint16_t RESERVED0; /*!< Reserved, 0x02 */
+ __IO uint16_t CR2; /*!< SPI Control register 2, Address offset: 0x04 */
+ uint16_t RESERVED1; /*!< Reserved, 0x06 */
+ __IO uint16_t SR; /*!< SPI Status register, Address offset: 0x08 */
+ uint16_t RESERVED2; /*!< Reserved, 0x0A */
+ __IO uint16_t DR; /*!< SPI data register, Address offset: 0x0C */
+ uint16_t RESERVED3; /*!< Reserved, 0x0E */
+ __IO uint16_t CRCPR; /*!< SPI CRC polynomial register (not used in I2S mode), Address offset: 0x10 */
+ uint16_t RESERVED4; /*!< Reserved, 0x12 */
+ __IO uint16_t RXCRCR; /*!< SPI Rx CRC register (not used in I2S mode), Address offset: 0x14 */
+ uint16_t RESERVED5; /*!< Reserved, 0x16 */
+ __IO uint16_t TXCRCR; /*!< SPI Tx CRC register (not used in I2S mode), Address offset: 0x18 */
+ uint16_t RESERVED6; /*!< Reserved, 0x1A */
+ __IO uint16_t I2SCFGR; /*!< SPI_I2S configuration register, Address offset: 0x1C */
+ uint16_t RESERVED7; /*!< Reserved, 0x1E */
+ __IO uint16_t I2SPR; /*!< SPI_I2S prescaler register, Address offset: 0x20 */
+ uint16_t RESERVED8; /*!< Reserved, 0x22 */
+} SPI_TypeDef;
+
+/**
+ * @brief TIM
+ */
+typedef struct
+{
+ __IO uint16_t CR1; /*!< TIM control register 1, Address offset: 0x00 */
+ uint16_t RESERVED0; /*!< Reserved, 0x02 */
+ __IO uint32_t CR2; /*!< TIM control register 2, Address offset: 0x04 */
+ __IO uint32_t SMCR; /*!< TIM slave mode control register, Address offset: 0x08 */
+ __IO uint32_t DIER; /*!< TIM DMA/interrupt enable register, Address offset: 0x0C */
+ __IO uint32_t SR; /*!< TIM status register, Address offset: 0x10 */
+ __IO uint32_t EGR; /*!< TIM event generation register, Address offset: 0x14 */
+ __IO uint32_t CCMR1; /*!< TIM capture/compare mode register 1, Address offset: 0x18 */
+ __IO uint32_t CCMR2; /*!< TIM capture/compare mode register 2, Address offset: 0x1C */
+ __IO uint32_t CCER; /*!< TIM capture/compare enable register, Address offset: 0x20 */
+ __IO uint32_t CNT; /*!< TIM counter register, Address offset: 0x24 */
+ __IO uint16_t PSC; /*!< TIM prescaler, Address offset: 0x28 */
+ uint16_t RESERVED9; /*!< Reserved, 0x2A */
+ __IO uint32_t ARR; /*!< TIM auto-reload register, Address offset: 0x2C */
+ __IO uint16_t RCR; /*!< TIM repetition counter register, Address offset: 0x30 */
+ uint16_t RESERVED10; /*!< Reserved, 0x32 */
+ __IO uint32_t CCR1; /*!< TIM capture/compare register 1, Address offset: 0x34 */
+ __IO uint32_t CCR2; /*!< TIM capture/compare register 2, Address offset: 0x38 */
+ __IO uint32_t CCR3; /*!< TIM capture/compare register 3, Address offset: 0x3C */
+ __IO uint32_t CCR4; /*!< TIM capture/compare register 4, Address offset: 0x40 */
+ __IO uint32_t BDTR; /*!< TIM break and dead-time register, Address offset: 0x44 */
+ __IO uint16_t DCR; /*!< TIM DMA control register, Address offset: 0x48 */
+ uint16_t RESERVED12; /*!< Reserved, 0x4A */
+ __IO uint16_t DMAR; /*!< TIM DMA address for full transfer, Address offset: 0x4C */
+ uint16_t RESERVED13; /*!< Reserved, 0x4E */
+ __IO uint16_t OR; /*!< TIM option register, Address offset: 0x50 */
+ __IO uint32_t CCMR3; /*!< TIM capture/compare mode register 3, Address offset: 0x54 */
+ __IO uint32_t CCR5; /*!< TIM capture/compare register5, Address offset: 0x58 */
+ __IO uint32_t CCR6; /*!< TIM capture/compare register 4, Address offset: 0x5C */
+} TIM_TypeDef;
+
+
+/**
+ * @brief Touch Sensing Controller (TSC)
+ */
+typedef struct
+{
+ __IO uint32_t CR; /*!< TSC control register, Address offset: 0x00 */
+ __IO uint32_t IER; /*!< TSC interrupt enable register, Address offset: 0x04 */
+ __IO uint32_t ICR; /*!< TSC interrupt clear register, Address offset: 0x08 */
+ __IO uint32_t ISR; /*!< TSC interrupt status register, Address offset: 0x0C */
+ __IO uint32_t IOHCR; /*!< TSC I/O hysteresis control register, Address offset: 0x10 */
+ uint32_t RESERVED1; /*!< Reserved, Address offset: 0x14 */
+ __IO uint32_t IOASCR; /*!< TSC I/O analog switch control register, Address offset: 0x18 */
+ uint32_t RESERVED2; /*!< Reserved, Address offset: 0x1C */
+ __IO uint32_t IOSCR; /*!< TSC I/O sampling control register, Address offset: 0x20 */
+ uint32_t RESERVED3; /*!< Reserved, Address offset: 0x24 */
+ __IO uint32_t IOCCR; /*!< TSC I/O channel control register, Address offset: 0x28 */
+ uint32_t RESERVED4; /*!< Reserved, Address offset: 0x2C */
+ __IO uint32_t IOGCSR; /*!< TSC I/O group control status register, Address offset: 0x30 */
+ __IO uint32_t IOGXCR[8]; /*!< TSC I/O group x counter register, Address offset: 0x34-50 */
+} TSC_TypeDef;
+
+/**
+ * @brief Universal Synchronous Asynchronous Receiver Transmitter
+ */
+
+typedef struct
+{
+ __IO uint32_t CR1; /*!< USART Control register 1, Address offset: 0x00 */
+ __IO uint32_t CR2; /*!< USART Control register 2, Address offset: 0x04 */
+ __IO uint32_t CR3; /*!< USART Control register 3, Address offset: 0x08 */
+ __IO uint16_t BRR; /*!< USART Baud rate register, Address offset: 0x0C */
+ uint16_t RESERVED1; /*!< Reserved, 0x0E */
+ __IO uint16_t GTPR; /*!< USART Guard time and prescaler register, Address offset: 0x10 */
+ uint16_t RESERVED2; /*!< Reserved, 0x12 */
+ __IO uint32_t RTOR; /*!< USART Receiver Time Out register, Address offset: 0x14 */
+ __IO uint16_t RQR; /*!< USART Request register, Address offset: 0x18 */
+ uint16_t RESERVED3; /*!< Reserved, 0x1A */
+ __IO uint32_t ISR; /*!< USART Interrupt and status register, Address offset: 0x1C */
+ __IO uint32_t ICR; /*!< USART Interrupt flag Clear register, Address offset: 0x20 */
+ __IO uint16_t RDR; /*!< USART Receive Data register, Address offset: 0x24 */
+ uint16_t RESERVED4; /*!< Reserved, 0x26 */
+ __IO uint16_t TDR; /*!< USART Transmit Data register, Address offset: 0x28 */
+ uint16_t RESERVED5; /*!< Reserved, 0x2A */
+} USART_TypeDef;
+
+/**
+ * @brief Window WATCHDOG
+ */
+typedef struct
+{
+ __IO uint32_t CR; /*!< WWDG Control register, Address offset: 0x00 */
+ __IO uint32_t CFR; /*!< WWDG Configuration register, Address offset: 0x04 */
+ __IO uint32_t SR; /*!< WWDG Status register, Address offset: 0x08 */
+} WWDG_TypeDef;
+
+
+/** @addtogroup Peripheral_memory_map
+ * @{
+ */
+
+#define FLASH_BASE ((uint32_t)0x08000000) /*!< FLASH base address in the alias region */
+#define SRAM_BASE ((uint32_t)0x20000000) /*!< SRAM base address in the alias region */
+#define PERIPH_BASE ((uint32_t)0x40000000) /*!< Peripheral base address in the alias region */
+
+#define SRAM_BB_BASE ((uint32_t)0x22000000) /*!< SRAM base address in the bit-band region */
+#define PERIPH_BB_BASE ((uint32_t)0x42000000) /*!< Peripheral base address in the bit-band region */
+
+
+/*!< Peripheral memory map */
+#define APB1PERIPH_BASE PERIPH_BASE
+#define APB2PERIPH_BASE (PERIPH_BASE + 0x00010000)
+#define AHB1PERIPH_BASE (PERIPH_BASE + 0x00020000)
+#define AHB2PERIPH_BASE (PERIPH_BASE + 0x08000000)
+#define AHB3PERIPH_BASE (PERIPH_BASE + 0x10000000)
+
+/*!< APB1 peripherals */
+#define TIM2_BASE (APB1PERIPH_BASE + 0x00000000)
+#define TIM3_BASE (APB1PERIPH_BASE + 0x00000400)
+#define TIM4_BASE (APB1PERIPH_BASE + 0x00000800)
+#define TIM6_BASE (APB1PERIPH_BASE + 0x00001000)
+#define TIM7_BASE (APB1PERIPH_BASE + 0x00001400)
+#define RTC_BASE (APB1PERIPH_BASE + 0x00002800)
+#define WWDG_BASE (APB1PERIPH_BASE + 0x00002C00)
+#define IWDG_BASE (APB1PERIPH_BASE + 0x00003000)
+#define I2S2ext_BASE (APB1PERIPH_BASE + 0x00003400)
+#define SPI2_BASE (APB1PERIPH_BASE + 0x00003800)
+#define SPI3_BASE (APB1PERIPH_BASE + 0x00003C00)
+#define I2S3ext_BASE (APB1PERIPH_BASE + 0x00004000)
+#define USART2_BASE (APB1PERIPH_BASE + 0x00004400)
+#define USART3_BASE (APB1PERIPH_BASE + 0x00004800)
+#define UART4_BASE (APB1PERIPH_BASE + 0x00004C00)
+#define UART5_BASE (APB1PERIPH_BASE + 0x00005000)
+#define I2C1_BASE (APB1PERIPH_BASE + 0x00005400)
+#define I2C2_BASE (APB1PERIPH_BASE + 0x00005800)
+#define CAN1_BASE (APB1PERIPH_BASE + 0x00006400)
+#define PWR_BASE (APB1PERIPH_BASE + 0x00007000)
+#define DAC_BASE (APB1PERIPH_BASE + 0x00007400)
+
+/*!< APB2 peripherals */
+#define SYSCFG_BASE (APB2PERIPH_BASE + 0x00000000)
+#define COMP_BASE (APB2PERIPH_BASE + 0x0000001C)
+#define COMP1_BASE (APB2PERIPH_BASE + 0x0000001C)
+#define COMP2_BASE (APB2PERIPH_BASE + 0x00000020)
+#define COMP3_BASE (APB2PERIPH_BASE + 0x00000024)
+#define COMP4_BASE (APB2PERIPH_BASE + 0x00000028)
+#define COMP5_BASE (APB2PERIPH_BASE + 0x0000002C)
+#define COMP6_BASE (APB2PERIPH_BASE + 0x00000030)
+#define COMP7_BASE (APB2PERIPH_BASE + 0x00000034)
+#define OPAMP_BASE (APB2PERIPH_BASE + 0x00000038)
+#define OPAMP1_BASE (APB2PERIPH_BASE + 0x00000038)
+#define OPAMP2_BASE (APB2PERIPH_BASE + 0x0000003C)
+#define OPAMP3_BASE (APB2PERIPH_BASE + 0x00000040)
+#define OPAMP4_BASE (APB2PERIPH_BASE + 0x00000044)
+#define EXTI_BASE (APB2PERIPH_BASE + 0x00000400)
+#define TIM1_BASE (APB2PERIPH_BASE + 0x00002C00)
+#define SPI1_BASE (APB2PERIPH_BASE + 0x00003000)
+#define TIM8_BASE (APB2PERIPH_BASE + 0x00003400)
+#define USART1_BASE (APB2PERIPH_BASE + 0x00003800)
+#define TIM15_BASE (APB2PERIPH_BASE + 0x00004000)
+#define TIM16_BASE (APB2PERIPH_BASE + 0x00004400)
+#define TIM17_BASE (APB2PERIPH_BASE + 0x00004800)
+
+/*!< AHB1 peripherals */
+#define DMA1_BASE (AHB1PERIPH_BASE + 0x00000000)
+#define DMA1_Channel1_BASE (AHB1PERIPH_BASE + 0x00000008)
+#define DMA1_Channel2_BASE (AHB1PERIPH_BASE + 0x0000001C)
+#define DMA1_Channel3_BASE (AHB1PERIPH_BASE + 0x00000030)
+#define DMA1_Channel4_BASE (AHB1PERIPH_BASE + 0x00000044)
+#define DMA1_Channel5_BASE (AHB1PERIPH_BASE + 0x00000058)
+#define DMA1_Channel6_BASE (AHB1PERIPH_BASE + 0x0000006C)
+#define DMA1_Channel7_BASE (AHB1PERIPH_BASE + 0x00000080)
+#define DMA2_BASE (AHB1PERIPH_BASE + 0x00000400)
+#define DMA2_Channel1_BASE (AHB1PERIPH_BASE + 0x00000408)
+#define DMA2_Channel2_BASE (AHB1PERIPH_BASE + 0x0000041C)
+#define DMA2_Channel3_BASE (AHB1PERIPH_BASE + 0x00000430)
+#define DMA2_Channel4_BASE (AHB1PERIPH_BASE + 0x00000444)
+#define DMA2_Channel5_BASE (AHB1PERIPH_BASE + 0x00000458)
+#define RCC_BASE (AHB1PERIPH_BASE + 0x00001000)
+#define FLASH_R_BASE (AHB1PERIPH_BASE + 0x00002000) /*!< Flash registers base address */
+#define OB_BASE ((uint32_t)0x1FFFF800) /*!< Flash Option Bytes base address */
+#define CRC_BASE (AHB1PERIPH_BASE + 0x00003000)
+#define TSC_BASE (AHB1PERIPH_BASE + 0x00004000)
+
+/*!< AHB2 peripherals */
+#define GPIOA_BASE (AHB2PERIPH_BASE + 0x0000)
+#define GPIOB_BASE (AHB2PERIPH_BASE + 0x0400)
+#define GPIOC_BASE (AHB2PERIPH_BASE + 0x0800)
+#define GPIOD_BASE (AHB2PERIPH_BASE + 0x0C00)
+#define GPIOE_BASE (AHB2PERIPH_BASE + 0x1000)
+#define GPIOF_BASE (AHB2PERIPH_BASE + 0x1400)
+
+/*!< AHB3 peripherals */
+#define ADC1_BASE (AHB3PERIPH_BASE + 0x0000)
+#define ADC2_BASE (AHB3PERIPH_BASE + 0x0100)
+#define ADC1_2_BASE (AHB3PERIPH_BASE + 0x0300)
+#define ADC3_BASE (AHB3PERIPH_BASE + 0x0400)
+#define ADC4_BASE (AHB3PERIPH_BASE + 0x0500)
+#define ADC3_4_BASE (AHB3PERIPH_BASE + 0x0700)
+
+#define DBGMCU_BASE ((uint32_t)0xE0042000) /*!< Debug MCU registers base address */
+/**
+ * @}
+ */
+
+/** @addtogroup Peripheral_declaration
+ * @{
+ */
+#define TIM2 ((TIM_TypeDef *) TIM2_BASE)
+#define TIM3 ((TIM_TypeDef *) TIM3_BASE)
+#define TIM4 ((TIM_TypeDef *) TIM4_BASE)
+#define TIM6 ((TIM_TypeDef *) TIM6_BASE)
+#define TIM7 ((TIM_TypeDef *) TIM7_BASE)
+#define RTC ((RTC_TypeDef *) RTC_BASE)
+#define WWDG ((WWDG_TypeDef *) WWDG_BASE)
+#define IWDG ((IWDG_TypeDef *) IWDG_BASE)
+#define I2S2ext ((SPI_TypeDef *) I2S2ext_BASE)
+#define SPI2 ((SPI_TypeDef *) SPI2_BASE)
+#define SPI3 ((SPI_TypeDef *) SPI3_BASE)
+#define I2S3ext ((SPI_TypeDef *) I2S3ext_BASE)
+#define USART2 ((USART_TypeDef *) USART2_BASE)
+#define USART3 ((USART_TypeDef *) USART3_BASE)
+#define UART4 ((USART_TypeDef *) UART4_BASE)
+#define UART5 ((USART_TypeDef *) UART5_BASE)
+#define I2C1 ((I2C_TypeDef *) I2C1_BASE)
+#define I2C2 ((I2C_TypeDef *) I2C2_BASE)
+#define CAN1 ((CAN_TypeDef *) CAN1_BASE)
+#define PWR ((PWR_TypeDef *) PWR_BASE)
+#define DAC ((DAC_TypeDef *) DAC_BASE)
+#define SYSCFG ((SYSCFG_TypeDef *) SYSCFG_BASE)
+#define COMP ((COMP_TypeDef *) COMP_BASE)
+#define COMP1 ((COMP_TypeDef *) COMP1_BASE)
+#define COMP2 ((COMP_TypeDef *) COMP2_BASE)
+#define COMP3 ((COMP_TypeDef *) COMP3_BASE)
+#define COMP4 ((COMP_TypeDef *) COMP4_BASE)
+#define COMP5 ((COMP_TypeDef *) COMP5_BASE)
+#define COMP6 ((COMP_TypeDef *) COMP6_BASE)
+#define COMP7 ((COMP_TypeDef *) COMP7_BASE)
+#define OPAMP ((OPAMP_TypeDef *) OPAMP_BASE)
+#define OPAMP1 ((OPAMP_TypeDef *) OPAMP1_BASE)
+#define OPAMP2 ((OPAMP_TypeDef *) OPAMP2_BASE)
+#define OPAMP3 ((OPAMP_TypeDef *) OPAMP3_BASE)
+#define OPAMP4 ((OPAMP_TypeDef *) OPAMP4_BASE)
+#define EXTI ((EXTI_TypeDef *) EXTI_BASE)
+#define TIM1 ((TIM_TypeDef *) TIM1_BASE)
+#define SPI1 ((SPI_TypeDef *) SPI1_BASE)
+#define TIM8 ((TIM_TypeDef *) TIM8_BASE)
+#define USART1 ((USART_TypeDef *) USART1_BASE)
+#define TIM15 ((TIM_TypeDef *) TIM15_BASE)
+#define TIM16 ((TIM_TypeDef *) TIM16_BASE)
+#define TIM17 ((TIM_TypeDef *) TIM17_BASE)
+#define DBGMCU ((DBGMCU_TypeDef *) DBGMCU_BASE)
+#define DMA1 ((DMA_TypeDef *) DMA1_BASE)
+#define DMA1_Channel1 ((DMA_Channel_TypeDef *) DMA1_Channel1_BASE)
+#define DMA1_Channel2 ((DMA_Channel_TypeDef *) DMA1_Channel2_BASE)
+#define DMA1_Channel3 ((DMA_Channel_TypeDef *) DMA1_Channel3_BASE)
+#define DMA1_Channel4 ((DMA_Channel_TypeDef *) DMA1_Channel4_BASE)
+#define DMA1_Channel5 ((DMA_Channel_TypeDef *) DMA1_Channel5_BASE)
+#define DMA1_Channel6 ((DMA_Channel_TypeDef *) DMA1_Channel6_BASE)
+#define DMA1_Channel7 ((DMA_Channel_TypeDef *) DMA1_Channel7_BASE)
+#define DMA2 ((DMA_TypeDef *) DMA2_BASE)
+#define DMA2_Channel1 ((DMA_Channel_TypeDef *) DMA2_Channel1_BASE)
+#define DMA2_Channel2 ((DMA_Channel_TypeDef *) DMA2_Channel2_BASE)
+#define DMA2_Channel3 ((DMA_Channel_TypeDef *) DMA2_Channel3_BASE)
+#define DMA2_Channel4 ((DMA_Channel_TypeDef *) DMA2_Channel4_BASE)
+#define DMA2_Channel5 ((DMA_Channel_TypeDef *) DMA2_Channel5_BASE)
+#define RCC ((RCC_TypeDef *) RCC_BASE)
+#define FLASH ((FLASH_TypeDef *) FLASH_R_BASE)
+#define OB ((OB_TypeDef *) OB_BASE)
+#define CRC ((CRC_TypeDef *) CRC_BASE)
+#define TSC ((TSC_TypeDef *) TSC_BASE)
+#define GPIOA ((GPIO_TypeDef *) GPIOA_BASE)
+#define GPIOB ((GPIO_TypeDef *) GPIOB_BASE)
+#define GPIOC ((GPIO_TypeDef *) GPIOC_BASE)
+#define GPIOD ((GPIO_TypeDef *) GPIOD_BASE)
+#define GPIOE ((GPIO_TypeDef *) GPIOE_BASE)
+#define GPIOF ((GPIO_TypeDef *) GPIOF_BASE)
+#define ADC1 ((ADC_TypeDef *) ADC1_BASE)
+#define ADC2 ((ADC_TypeDef *) ADC2_BASE)
+#define ADC3 ((ADC_TypeDef *) ADC3_BASE)
+#define ADC4 ((ADC_TypeDef *) ADC4_BASE)
+#define ADC1_2 ((ADC_Common_TypeDef *) ADC1_2_BASE)
+#define ADC3_4 ((ADC_Common_TypeDef *) ADC3_4_BASE)
+/**
+ * @}
+ */
+
+/** @addtogroup Exported_constants
+ * @{
+ */
+
+ /** @addtogroup Peripheral_Registers_Bits_Definition
+ * @{
+ */
+
+/******************************************************************************/
+/* Peripheral Registers_Bits_Definition */
+/******************************************************************************/
+
+/******************************************************************************/
+/* */
+/* Analog to Digital Converter SAR (ADC) */
+/* */
+/******************************************************************************/
+/******************** Bit definition for ADC_ISR register ********************/
+/* CHIBIOS FIX */
+//#define ADC_ISR_ADRD ((uint32_t)0x00000001) /*!< ADC Ready (ADRDY) flag */
+#define ADC_ISR_ADRDY ((uint32_t)0x00000001) /*!< ADC Ready (ADRDY) flag */
+#define ADC_ISR_EOSMP ((uint32_t)0x00000002) /*!< ADC End of Sampling flag */
+#define ADC_ISR_EOC ((uint32_t)0x00000004) /*!< ADC End of Regular Conversion flag */
+#define ADC_ISR_EOS ((uint32_t)0x00000008) /*!< ADC End of Regular sequence of Conversions flag */
+#define ADC_ISR_OVR ((uint32_t)0x00000010) /*!< ADC overrun flag */
+#define ADC_ISR_JEOC ((uint32_t)0x00000020) /*!< ADC End of Injected Conversion flag */
+#define ADC_ISR_JEOS ((uint32_t)0x00000040) /*!< ADC End of Injected sequence of Conversions flag */
+#define ADC_ISR_AWD1 ((uint32_t)0x00000080) /*!< ADC Analog watchdog 1 flag */
+#define ADC_ISR_AWD2 ((uint32_t)0x00000100) /*!< ADC Analog watchdog 2 flag */
+#define ADC_ISR_AWD3 ((uint32_t)0x00000200) /*!< ADC Analog watchdog 3 flag */
+#define ADC_ISR_JQOVF ((uint32_t)0x00000400) /*!< ADC Injected Context Queue Overflow flag */
+
+/******************** Bit definition for ADC_IER register ********************/
+#define ADC_IER_RDY ((uint32_t)0x00000001) /*!< ADC Ready (ADRDY) interrupt source */
+#define ADC_IER_EOSMP ((uint32_t)0x00000002) /*!< ADC End of Sampling interrupt source */
+#define ADC_IER_EOC ((uint32_t)0x00000004) /*!< ADC End of Regular Conversion interrupt source */
+#define ADC_IER_EOS ((uint32_t)0x00000008) /*!< ADC End of Regular sequence of Conversions interrupt source */
+#define ADC_IER_OVR ((uint32_t)0x00000010) /*!< ADC overrun interrupt source */
+#define ADC_IER_JEOC ((uint32_t)0x00000020) /*!< ADC End of Injected Conversion interrupt source */
+#define ADC_IER_JEOS ((uint32_t)0x00000040) /*!< ADC End of Injected sequence of Conversions interrupt source */
+#define ADC_IER_AWD1 ((uint32_t)0x00000080) /*!< ADC Analog watchdog 1 interrupt source */
+#define ADC_IER_AWD2 ((uint32_t)0x00000100) /*!< ADC Analog watchdog 2 interrupt source */
+#define ADC_IER_AWD3 ((uint32_t)0x00000200) /*!< ADC Analog watchdog 3 interrupt source */
+#define ADC_IER_JQOVF ((uint32_t)0x00000400) /*!< ADC Injected Context Queue Overflow interrupt source */
+
+/******************** Bit definition for ADC_CR register ********************/
+#define ADC_CR_ADEN ((uint32_t)0x00000001) /*!< ADC Enable control */
+#define ADC_CR_ADDIS ((uint32_t)0x00000002) /*!< ADC Disable command */
+#define ADC_CR_ADSTART ((uint32_t)0x00000004) /*!< ADC Start of Regular conversion */
+#define ADC_CR_JADSTART ((uint32_t)0x00000008) /*!< ADC Start of injected conversion */
+#define ADC_CR_ADSTP ((uint32_t)0x00000010) /*!< ADC Stop of Regular conversion */
+#define ADC_CR_JADSTP ((uint32_t)0x00000020) /*!< ADC Stop of injected conversion */
+#define ADC_CR_ADVREGEN ((uint32_t)0x30000000) /*!< ADC Voltage regulator Enable */
+#define ADC_CR_ADVREGEN_0 ((uint32_t)0x10000000) /*!< ADC ADVREGEN bit 0 */
+#define ADC_CR_ADVREGEN_1 ((uint32_t)0x20000000) /*!< ADC ADVREGEN bit 1 */
+#define ADC_CR_ADCALDIF ((uint32_t)0x40000000) /*!< ADC Differential Mode for calibration */
+#define ADC_CR_ADCAL ((uint32_t)0x80000000) /*!< ADC Calibration */
+
+/******************** Bit definition for ADC_CFGR register ********************/
+#define ADC_CFGR_DMAEN ((uint32_t)0x00000001) /*!< ADC DMA Enable */
+#define ADC_CFGR_DMACFG ((uint32_t)0x00000002) /*!< ADC DMA configuration */
+
+#define ADC_CFGR_RES ((uint32_t)0x00000018) /*!< ADC Data resolution */
+#define ADC_CFGR_RES_0 ((uint32_t)0x00000008) /*!< ADC RES bit 0 */
+#define ADC_CFGR_RES_1 ((uint32_t)0x00000010) /*!< ADC RES bit 1 */
+
+#define ADC_CFGR_ALIGN ((uint32_t)0x00000020) /*!< ADC Data Alignement */
+
+#define ADC_CFGR_EXTSEL ((uint32_t)0x000003C0) /*!< ADC External trigger selection for regular group */
+#define ADC_CFGR_EXTSEL_0 ((uint32_t)0x00000040) /*!< ADC EXTSEL bit 0 */
+#define ADC_CFGR_EXTSEL_1 ((uint32_t)0x00000080) /*!< ADC EXTSEL bit 1 */
+#define ADC_CFGR_EXTSEL_2 ((uint32_t)0x00000100) /*!< ADC EXTSEL bit 2 */
+#define ADC_CFGR_EXTSEL_3 ((uint32_t)0x00000200) /*!< ADC EXTSEL bit 3 */
+
+#define ADC_CFGR_EXTEN ((uint32_t)0x00000C00) /*!< ADC External trigger enable and polarity selection for regular channels */
+#define ADC_CFGR_EXTEN_0 ((uint32_t)0x00000400) /*!< ADC EXTEN bit 0 */
+#define ADC_CFGR_EXTEN_1 ((uint32_t)0x00000800) /*!< ADC EXTEN bit 1 */
+
+#define ADC_CFGR_OVRMOD ((uint32_t)0x00001000) /*!< ADC overrun mode */
+#define ADC_CFGR_CONT ((uint32_t)0x00002000) /*!< ADC Single/continuous conversion mode for regular conversion */
+#define ADC_CFGR_AUTDLY ((uint32_t)0x00004000) /*!< ADC Delayed conversion mode */
+#define ADC_CFGR_AUTOFF ((uint32_t)0x00008000) /*!< ADC Auto power OFF */
+#define ADC_CFGR_DISCEN ((uint32_t)0x00010000) /*!< ADC Discontinuous mode for regular channels */
+
+#define ADC_CFGR_DISCNUM ((uint32_t)0x000E0000) /*!< ADC Discontinuous mode channel count */
+#define ADC_CFGR_DISCNUM_0 ((uint32_t)0x00020000) /*!< ADC DISCNUM bit 0 */
+#define ADC_CFGR_DISCNUM_1 ((uint32_t)0x00040000) /*!< ADC DISCNUM bit 1 */
+#define ADC_CFGR_DISCNUM_2 ((uint32_t)0x00080000) /*!< ADC DISCNUM bit 2 */
+
+#define ADC_CFGR_JDISCEN ((uint32_t)0x00100000) /*!< ADC Discontinous mode on injected channels */
+#define ADC_CFGR_JQM ((uint32_t)0x00200000) /*!< ADC JSQR Queue mode */
+#define ADC_CFGR_AWD1SGL ((uint32_t)0x00400000) /*!< Eanble the watchdog 1 on a single channel or on all channels */
+#define ADC_CFGR_AWD1EN ((uint32_t)0x00800000) /*!< ADC Analog watchdog 1 enable on regular Channels */
+#define ADC_CFGR_JAWD1EN ((uint32_t)0x01000000) /*!< ADC Analog watchdog 1 enable on injected Channels */
+#define ADC_CFGR_JAUTO ((uint32_t)0x02000000) /*!< ADC Automatic injected group conversion */
+
+#define ADC_CFGR_AWD1CH ((uint32_t)0x7C000000) /*!< ADC Analog watchdog 1 Channel selection */
+#define ADC_CFGR_AWD1CH_0 ((uint32_t)0x04000000) /*!< ADC AWD1CH bit 0 */
+#define ADC_CFGR_AWD1CH_1 ((uint32_t)0x08000000) /*!< ADC AWD1CH bit 1 */
+#define ADC_CFGR_AWD1CH_2 ((uint32_t)0x10000000) /*!< ADC AWD1CH bit 2 */
+#define ADC_CFGR_AWD1CH_3 ((uint32_t)0x20000000) /*!< ADC AWD1CH bit 3 */
+#define ADC_CFGR_AWD1CH_4 ((uint32_t)0x40000000) /*!< ADC AWD1CH bit 4 */
+
+/******************** Bit definition for ADC_SMPR1 register ********************/
+#define ADC_SMPR1_SMP0 ((uint32_t)0x00000007) /*!< ADC Channel 0 Sampling time selection */
+#define ADC_SMPR1_SMP0_0 ((uint32_t)0x00000001) /*!< ADC SMP0 bit 0 */
+#define ADC_SMPR1_SMP0_1 ((uint32_t)0x00000002) /*!< ADC SMP0 bit 1 */
+#define ADC_SMPR1_SMP0_2 ((uint32_t)0x00000004) /*!< ADC SMP0 bit 2 */
+
+#define ADC_SMPR1_SMP1 ((uint32_t)0x00000038) /*!< ADC Channel 1 Sampling time selection */
+#define ADC_SMPR1_SMP1_0 ((uint32_t)0x00000008) /*!< ADC SMP1 bit 0 */
+#define ADC_SMPR1_SMP1_1 ((uint32_t)0x00000010) /*!< ADC SMP1 bit 1 */
+#define ADC_SMPR1_SMP1_2 ((uint32_t)0x00000020) /*!< ADC SMP1 bit 2 */
+
+#define ADC_SMPR1_SMP2 ((uint32_t)0x000001C0) /*!< ADC Channel 2 Sampling time selection */
+#define ADC_SMPR1_SMP2_0 ((uint32_t)0x00000040) /*!< ADC SMP2 bit 0 */
+#define ADC_SMPR1_SMP2_1 ((uint32_t)0x00000080) /*!< ADC SMP2 bit 1 */
+#define ADC_SMPR1_SMP2_2 ((uint32_t)0x00000100) /*!< ADC SMP2 bit 2 */
+
+#define ADC_SMPR1_SMP3 ((uint32_t)0x00000E00) /*!< ADC Channel 3 Sampling time selection */
+#define ADC_SMPR1_SMP3_0 ((uint32_t)0x00000200) /*!< ADC SMP3 bit 0 */
+#define ADC_SMPR1_SMP3_1 ((uint32_t)0x00000400) /*!< ADC SMP3 bit 1 */
+#define ADC_SMPR1_SMP3_2 ((uint32_t)0x00000800) /*!< ADC SMP3 bit 2 */
+
+#define ADC_SMPR1_SMP4 ((uint32_t)0x00007000) /*!< ADC Channel 4 Sampling time selection */
+#define ADC_SMPR1_SMP4_0 ((uint32_t)0x00001000) /*!< ADC SMP4 bit 0 */
+#define ADC_SMPR1_SMP4_1 ((uint32_t)0x00002000) /*!< ADC SMP4 bit 1 */
+#define ADC_SMPR1_SMP4_2 ((uint32_t)0x00004000) /*!< ADC SMP4 bit 2 */
+
+#define ADC_SMPR1_SMP5 ((uint32_t)0x00038000) /*!< ADC Channel 5 Sampling time selection */
+#define ADC_SMPR1_SMP5_0 ((uint32_t)0x00008000) /*!< ADC SMP5 bit 0 */
+#define ADC_SMPR1_SMP5_1 ((uint32_t)0x00010000) /*!< ADC SMP5 bit 1 */
+#define ADC_SMPR1_SMP5_2 ((uint32_t)0x00020000) /*!< ADC SMP5 bit 2 */
+
+#define ADC_SMPR1_SMP6 ((uint32_t)0x001C0000) /*!< ADC Channel 6 Sampling time selection */
+#define ADC_SMPR1_SMP6_0 ((uint32_t)0x00040000) /*!< ADC SMP6 bit 0 */
+#define ADC_SMPR1_SMP6_1 ((uint32_t)0x00080000) /*!< ADC SMP6 bit 1 */
+#define ADC_SMPR1_SMP6_2 ((uint32_t)0x00100000) /*!< ADC SMP6 bit 2 */
+
+#define ADC_SMPR1_SMP7 ((uint32_t)0x00E00000) /*!< ADC Channel 7 Sampling time selection */
+#define ADC_SMPR1_SMP7_0 ((uint32_t)0x00200000) /*!< ADC SMP7 bit 0 */
+#define ADC_SMPR1_SMP7_1 ((uint32_t)0x00400000) /*!< ADC SMP7 bit 1 */
+#define ADC_SMPR1_SMP7_2 ((uint32_t)0x00800000) /*!< ADC SMP7 bit 2 */
+
+#define ADC_SMPR1_SMP8 ((uint32_t)0x07000000) /*!< ADC Channel 8 Sampling time selection */
+#define ADC_SMPR1_SMP8_0 ((uint32_t)0x01000000) /*!< ADC SMP8 bit 0 */
+#define ADC_SMPR1_SMP8_1 ((uint32_t)0x02000000) /*!< ADC SMP8 bit 1 */
+#define ADC_SMPR1_SMP8_2 ((uint32_t)0x04000000) /*!< ADC SMP8 bit 2 */
+
+#define ADC_SMPR1_SMP9 ((uint32_t)0x38000000) /*!< ADC Channel 9 Sampling time selection */
+#define ADC_SMPR1_SMP9_0 ((uint32_t)0x08000000) /*!< ADC SMP9 bit 0 */
+#define ADC_SMPR1_SMP9_1 ((uint32_t)0x10000000) /*!< ADC SMP9 bit 1 */
+#define ADC_SMPR1_SMP9_2 ((uint32_t)0x20000000) /*!< ADC SMP9 bit 2 */
+
+/******************** Bit definition for ADC_SMPR2 register ********************/
+#define ADC_SMPR2_SMP10 ((uint32_t)0x00000007) /*!< ADC Channel 10 Sampling time selection */
+#define ADC_SMPR2_SMP10_0 ((uint32_t)0x00000001) /*!< ADC SMP10 bit 0 */
+#define ADC_SMPR2_SMP10_1 ((uint32_t)0x00000002) /*!< ADC SMP10 bit 1 */
+#define ADC_SMPR2_SMP10_2 ((uint32_t)0x00000004) /*!< ADC SMP10 bit 2 */
+
+#define ADC_SMPR2_SMP11 ((uint32_t)0x00000038) /*!< ADC Channel 11 Sampling time selection */
+#define ADC_SMPR2_SMP11_0 ((uint32_t)0x00000008) /*!< ADC SMP11 bit 0 */
+#define ADC_SMPR2_SMP11_1 ((uint32_t)0x00000010) /*!< ADC SMP11 bit 1 */
+#define ADC_SMPR2_SMP11_2 ((uint32_t)0x00000020) /*!< ADC SMP11 bit 2 */
+
+#define ADC_SMPR2_SMP12 ((uint32_t)0x000001C0) /*!< ADC Channel 12 Sampling time selection */
+#define ADC_SMPR2_SMP12_0 ((uint32_t)0x00000040) /*!< ADC SMP12 bit 0 */
+#define ADC_SMPR2_SMP12_1 ((uint32_t)0x00000080) /*!< ADC SMP12 bit 1 */
+#define ADC_SMPR2_SMP12_2 ((uint32_t)0x00000100) /*!< ADC SMP12 bit 2 */
+
+#define ADC_SMPR2_SMP13 ((uint32_t)0x00000E00) /*!< ADC Channel 13 Sampling time selection */
+#define ADC_SMPR2_SMP13_0 ((uint32_t)0x00000200) /*!< ADC SMP13 bit 0 */
+#define ADC_SMPR2_SMP13_1 ((uint32_t)0x00000400) /*!< ADC SMP13 bit 1 */
+#define ADC_SMPR2_SMP13_2 ((uint32_t)0x00000800) /*!< ADC SMP13 bit 2 */
+
+#define ADC_SMPR2_SMP14 ((uint32_t)0x00007000) /*!< ADC Channel 14 Sampling time selection */
+#define ADC_SMPR2_SMP14_0 ((uint32_t)0x00001000) /*!< ADC SMP14 bit 0 */
+#define ADC_SMPR2_SMP14_1 ((uint32_t)0x00002000) /*!< ADC SMP14 bit 1 */
+#define ADC_SMPR2_SMP14_2 ((uint32_t)0x00004000) /*!< ADC SMP14 bit 2 */
+
+#define ADC_SMPR2_SMP15 ((uint32_t)0x00038000) /*!< ADC Channel 15 Sampling time selection */
+#define ADC_SMPR2_SMP15_0 ((uint32_t)0x00008000) /*!< ADC SMP15 bit 0 */
+#define ADC_SMPR2_SMP15_1 ((uint32_t)0x00010000) /*!< ADC SMP15 bit 1 */
+#define ADC_SMPR2_SMP15_2 ((uint32_t)0x00020000) /*!< ADC SMP15 bit 2 */
+
+#define ADC_SMPR2_SMP16 ((uint32_t)0x001C0000) /*!< ADC Channel 16 Sampling time selection */
+#define ADC_SMPR2_SMP16_0 ((uint32_t)0x00040000) /*!< ADC SMP16 bit 0 */
+#define ADC_SMPR2_SMP16_1 ((uint32_t)0x00080000) /*!< ADC SMP16 bit 1 */
+#define ADC_SMPR2_SMP16_2 ((uint32_t)0x00100000) /*!< ADC SMP16 bit 2 */
+
+#define ADC_SMPR2_SMP17 ((uint32_t)0x00E00000) /*!< ADC Channel 17 Sampling time selection */
+#define ADC_SMPR2_SMP17_0 ((uint32_t)0x00200000) /*!< ADC SMP17 bit 0 */
+#define ADC_SMPR2_SMP17_1 ((uint32_t)0x00400000) /*!< ADC SMP17 bit 1 */
+#define ADC_SMPR2_SMP17_2 ((uint32_t)0x00800000) /*!< ADC SMP17 bit 2 */
+
+#define ADC_SMPR2_SMP18 ((uint32_t)0x07000000) /*!< ADC Channel 18 Sampling time selection */
+#define ADC_SMPR2_SMP18_0 ((uint32_t)0x01000000) /*!< ADC SMP18 bit 0 */
+#define ADC_SMPR2_SMP18_1 ((uint32_t)0x02000000) /*!< ADC SMP18 bit 1 */
+#define ADC_SMPR2_SMP18_2 ((uint32_t)0x04000000) /*!< ADC SMP18 bit 2 */
+
+/******************** Bit definition for ADC_TR1 register ********************/
+#define ADC_TR1_LT1 ((uint32_t)0x00000FFF) /*!< ADC Analog watchdog 1 lower threshold */
+#define ADC_TR1_LT1_0 ((uint32_t)0x00000001) /*!< ADC LT1 bit 0 */
+#define ADC_TR1_LT1_1 ((uint32_t)0x00000002) /*!< ADC LT1 bit 1 */
+#define ADC_TR1_LT1_2 ((uint32_t)0x00000004) /*!< ADC LT1 bit 2 */
+#define ADC_TR1_LT1_3 ((uint32_t)0x00000008) /*!< ADC LT1 bit 3 */
+#define ADC_TR1_LT1_4 ((uint32_t)0x00000010) /*!< ADC LT1 bit 4 */
+#define ADC_TR1_LT1_5 ((uint32_t)0x00000020) /*!< ADC LT1 bit 5 */
+#define ADC_TR1_LT1_6 ((uint32_t)0x00000040) /*!< ADC LT1 bit 6 */
+#define ADC_TR1_LT1_7 ((uint32_t)0x00000080) /*!< ADC LT1 bit 7 */
+#define ADC_TR1_LT1_8 ((uint32_t)0x00000100) /*!< ADC LT1 bit 8 */
+#define ADC_TR1_LT1_9 ((uint32_t)0x00000200) /*!< ADC LT1 bit 9 */
+#define ADC_TR1_LT1_10 ((uint32_t)0x00000400) /*!< ADC LT1 bit 10 */
+#define ADC_TR1_LT1_11 ((uint32_t)0x00000800) /*!< ADC LT1 bit 11 */
+
+#define ADC_TR1_HT1 ((uint32_t)0x0FFF0000) /*!< ADC Analog watchdog 1 higher threshold */
+#define ADC_TR1_HT1_0 ((uint32_t)0x00010000) /*!< ADC HT1 bit 0 */
+#define ADC_TR1_HT1_1 ((uint32_t)0x00020000) /*!< ADC HT1 bit 1 */
+#define ADC_TR1_HT1_2 ((uint32_t)0x00040000) /*!< ADC HT1 bit 2 */
+#define ADC_TR1_HT1_3 ((uint32_t)0x00080000) /*!< ADC HT1 bit 3 */
+#define ADC_TR1_HT1_4 ((uint32_t)0x00100000) /*!< ADC HT1 bit 4 */
+#define ADC_TR1_HT1_5 ((uint32_t)0x00200000) /*!< ADC HT1 bit 5 */
+#define ADC_TR1_HT1_6 ((uint32_t)0x00400000) /*!< ADC HT1 bit 6 */
+#define ADC_TR1_HT1_7 ((uint32_t)0x00800000) /*!< ADC HT1 bit 7 */
+#define ADC_TR1_HT1_8 ((uint32_t)0x01000000) /*!< ADC HT1 bit 8 */
+#define ADC_TR1_HT1_9 ((uint32_t)0x02000000) /*!< ADC HT1 bit 9 */
+#define ADC_TR1_HT1_10 ((uint32_t)0x04000000) /*!< ADC HT1 bit 10 */
+#define ADC_TR1_HT1_11 ((uint32_t)0x08000000) /*!< ADC HT1 bit 11 */
+
+/******************** Bit definition for ADC_TR2 register ********************/
+#define ADC_TR2_LT2 ((uint32_t)0x000000FF) /*!< ADC Analog watchdog 2 lower threshold */
+#define ADC_TR2_LT2_0 ((uint32_t)0x00000001) /*!< ADC LT2 bit 0 */
+#define ADC_TR2_LT2_1 ((uint32_t)0x00000002) /*!< ADC LT2 bit 1 */
+#define ADC_TR2_LT2_2 ((uint32_t)0x00000004) /*!< ADC LT2 bit 2 */
+#define ADC_TR2_LT2_3 ((uint32_t)0x00000008) /*!< ADC LT2 bit 3 */
+#define ADC_TR2_LT2_4 ((uint32_t)0x00000010) /*!< ADC LT2 bit 4 */
+#define ADC_TR2_LT2_5 ((uint32_t)0x00000020) /*!< ADC LT2 bit 5 */
+#define ADC_TR2_LT2_6 ((uint32_t)0x00000040) /*!< ADC LT2 bit 6 */
+#define ADC_TR2_LT2_7 ((uint32_t)0x00000080) /*!< ADC LT2 bit 7 */
+
+#define ADC_TR2_HT2 ((uint32_t)0x00FF0000) /*!< ADC Analog watchdog 2 higher threshold */
+#define ADC_TR2_HT2_0 ((uint32_t)0x00010000) /*!< ADC HT2 bit 0 */
+#define ADC_TR2_HT2_1 ((uint32_t)0x00020000) /*!< ADC HT2 bit 1 */
+#define ADC_TR2_HT2_2 ((uint32_t)0x00040000) /*!< ADC HT2 bit 2 */
+#define ADC_TR2_HT2_3 ((uint32_t)0x00080000) /*!< ADC HT2 bit 3 */
+#define ADC_TR2_HT2_4 ((uint32_t)0x00100000) /*!< ADC HT2 bit 4 */
+#define ADC_TR2_HT2_5 ((uint32_t)0x00200000) /*!< ADC HT2 bit 5 */
+#define ADC_TR2_HT2_6 ((uint32_t)0x00400000) /*!< ADC HT2 bit 6 */
+#define ADC_TR2_HT2_7 ((uint32_t)0x00800000) /*!< ADC HT2 bit 7 */
+
+/******************** Bit definition for ADC_TR3 register ********************/
+#define ADC_TR3_LT3 ((uint32_t)0x000000FF) /*!< ADC Analog watchdog 3 lower threshold */
+#define ADC_TR3_LT3_0 ((uint32_t)0x00000001) /*!< ADC LT3 bit 0 */
+#define ADC_TR3_LT3_1 ((uint32_t)0x00000002) /*!< ADC LT3 bit 1 */
+#define ADC_TR3_LT3_2 ((uint32_t)0x00000004) /*!< ADC LT3 bit 2 */
+#define ADC_TR3_LT3_3 ((uint32_t)0x00000008) /*!< ADC LT3 bit 3 */
+#define ADC_TR3_LT3_4 ((uint32_t)0x00000010) /*!< ADC LT3 bit 4 */
+#define ADC_TR3_LT3_5 ((uint32_t)0x00000020) /*!< ADC LT3 bit 5 */
+#define ADC_TR3_LT3_6 ((uint32_t)0x00000040) /*!< ADC LT3 bit 6 */
+#define ADC_TR3_LT3_7 ((uint32_t)0x00000080) /*!< ADC LT3 bit 7 */
+
+#define ADC_TR3_HT3 ((uint32_t)0x00FF0000) /*!< ADC Analog watchdog 3 higher threshold */
+#define ADC_TR3_HT3_0 ((uint32_t)0x00010000) /*!< ADC HT3 bit 0 */
+#define ADC_TR3_HT3_1 ((uint32_t)0x00020000) /*!< ADC HT3 bit 1 */
+#define ADC_TR3_HT3_2 ((uint32_t)0x00040000) /*!< ADC HT3 bit 2 */
+#define ADC_TR3_HT3_3 ((uint32_t)0x00080000) /*!< ADC HT3 bit 3 */
+#define ADC_TR3_HT3_4 ((uint32_t)0x00100000) /*!< ADC HT3 bit 4 */
+#define ADC_TR3_HT3_5 ((uint32_t)0x00200000) /*!< ADC HT3 bit 5 */
+#define ADC_TR3_HT3_6 ((uint32_t)0x00400000) /*!< ADC HT3 bit 6 */
+#define ADC_TR3_HT3_7 ((uint32_t)0x00800000) /*!< ADC HT3 bit 7 */
+
+/******************** Bit definition for ADC_SQR1 register ********************/
+#define ADC_SQR1_L ((uint32_t)0x0000000F) /*!< ADC regular channel sequence lenght */
+#define ADC_SQR1_L_0 ((uint32_t)0x00000001) /*!< ADC L bit 0 */
+#define ADC_SQR1_L_1 ((uint32_t)0x00000002) /*!< ADC L bit 1 */
+#define ADC_SQR1_L_2 ((uint32_t)0x00000004) /*!< ADC L bit 2 */
+#define ADC_SQR1_L_3 ((uint32_t)0x00000008) /*!< ADC L bit 3 */
+
+#define ADC_SQR1_SQ1 ((uint32_t)0x000007C0) /*!< ADC 1st conversion in regular sequence */
+#define ADC_SQR1_SQ1_0 ((uint32_t)0x00000040) /*!< ADC SQ1 bit 0 */
+#define ADC_SQR1_SQ1_1 ((uint32_t)0x00000080) /*!< ADC SQ1 bit 1 */
+#define ADC_SQR1_SQ1_2 ((uint32_t)0x00000100) /*!< ADC SQ1 bit 2 */
+#define ADC_SQR1_SQ1_3 ((uint32_t)0x00000200) /*!< ADC SQ1 bit 3 */
+#define ADC_SQR1_SQ1_4 ((uint32_t)0x00000400) /*!< ADC SQ1 bit 4 */
+
+#define ADC_SQR1_SQ2 ((uint32_t)0x0001F000) /*!< ADC 2nd conversion in regular sequence */
+#define ADC_SQR1_SQ2_0 ((uint32_t)0x00001000) /*!< ADC SQ2 bit 0 */
+#define ADC_SQR1_SQ2_1 ((uint32_t)0x00002000) /*!< ADC SQ2 bit 1 */
+#define ADC_SQR1_SQ2_2 ((uint32_t)0x00004000) /*!< ADC SQ2 bit 2 */
+#define ADC_SQR1_SQ2_3 ((uint32_t)0x00008000) /*!< ADC SQ2 bit 3 */
+#define ADC_SQR1_SQ2_4 ((uint32_t)0x00010000) /*!< ADC SQ2 bit 4 */
+
+#define ADC_SQR1_SQ3 ((uint32_t)0x007C0000) /*!< ADC 3rd conversion in regular sequence */
+#define ADC_SQR1_SQ3_0 ((uint32_t)0x00040000) /*!< ADC SQ3 bit 0 */
+#define ADC_SQR1_SQ3_1 ((uint32_t)0x00080000) /*!< ADC SQ3 bit 1 */
+#define ADC_SQR1_SQ3_2 ((uint32_t)0x00100000) /*!< ADC SQ3 bit 2 */
+#define ADC_SQR1_SQ3_3 ((uint32_t)0x00200000) /*!< ADC SQ3 bit 3 */
+#define ADC_SQR1_SQ3_4 ((uint32_t)0x00400000) /*!< ADC SQ3 bit 4 */
+
+#define ADC_SQR1_SQ4 ((uint32_t)0x1F000000) /*!< ADC 4th conversion in regular sequence */
+#define ADC_SQR1_SQ4_0 ((uint32_t)0x01000000) /*!< ADC SQ4 bit 0 */
+#define ADC_SQR1_SQ4_1 ((uint32_t)0x02000000) /*!< ADC SQ4 bit 1 */
+#define ADC_SQR1_SQ4_2 ((uint32_t)0x04000000) /*!< ADC SQ4 bit 2 */
+#define ADC_SQR1_SQ4_3 ((uint32_t)0x08000000) /*!< ADC SQ4 bit 3 */
+#define ADC_SQR1_SQ4_4 ((uint32_t)0x10000000) /*!< ADC SQ4 bit 4 */
+
+/******************** Bit definition for ADC_SQR2 register ********************/
+#define ADC_SQR2_SQ5 ((uint32_t)0x0000001F) /*!< ADC 5th conversion in regular sequence */
+#define ADC_SQR2_SQ5_0 ((uint32_t)0x00000001) /*!< ADC SQ5 bit 0 */
+#define ADC_SQR2_SQ5_1 ((uint32_t)0x00000002) /*!< ADC SQ5 bit 1 */
+#define ADC_SQR2_SQ5_2 ((uint32_t)0x00000004) /*!< ADC SQ5 bit 2 */
+#define ADC_SQR2_SQ5_3 ((uint32_t)0x00000008) /*!< ADC SQ5 bit 3 */
+#define ADC_SQR2_SQ5_4 ((uint32_t)0x00000010) /*!< ADC SQ5 bit 4 */
+
+#define ADC_SQR2_SQ6 ((uint32_t)0x000007C0) /*!< ADC 6th conversion in regular sequence */
+#define ADC_SQR2_SQ6_0 ((uint32_t)0x00000040) /*!< ADC SQ6 bit 0 */
+#define ADC_SQR2_SQ6_1 ((uint32_t)0x00000080) /*!< ADC SQ6 bit 1 */
+#define ADC_SQR2_SQ6_2 ((uint32_t)0x00000100) /*!< ADC SQ6 bit 2 */
+#define ADC_SQR2_SQ6_3 ((uint32_t)0x00000200) /*!< ADC SQ6 bit 3 */
+#define ADC_SQR2_SQ6_4 ((uint32_t)0x00000400) /*!< ADC SQ6 bit 4 */
+
+#define ADC_SQR2_SQ7 ((uint32_t)0x0001F000) /*!< ADC 7th conversion in regular sequence */
+#define ADC_SQR2_SQ7_0 ((uint32_t)0x00001000) /*!< ADC SQ7 bit 0 */
+#define ADC_SQR2_SQ7_1 ((uint32_t)0x00002000) /*!< ADC SQ7 bit 1 */
+#define ADC_SQR2_SQ7_2 ((uint32_t)0x00004000) /*!< ADC SQ7 bit 2 */
+#define ADC_SQR2_SQ7_3 ((uint32_t)0x00008000) /*!< ADC SQ7 bit 3 */
+#define ADC_SQR2_SQ7_4 ((uint32_t)0x00010000) /*!< ADC SQ7 bit 4 */
+
+#define ADC_SQR2_SQ8 ((uint32_t)0x007C0000) /*!< ADC 8th conversion in regular sequence */
+#define ADC_SQR2_SQ8_0 ((uint32_t)0x00040000) /*!< ADC SQ8 bit 0 */
+#define ADC_SQR2_SQ8_1 ((uint32_t)0x00080000) /*!< ADC SQ8 bit 1 */
+#define ADC_SQR2_SQ8_2 ((uint32_t)0x00100000) /*!< ADC SQ8 bit 2 */
+#define ADC_SQR2_SQ8_3 ((uint32_t)0x00200000) /*!< ADC SQ8 bit 3 */
+#define ADC_SQR2_SQ8_4 ((uint32_t)0x00400000) /*!< ADC SQ8 bit 4 */
+
+#define ADC_SQR2_SQ9 ((uint32_t)0x1F000000) /*!< ADC 9th conversion in regular sequence */
+#define ADC_SQR2_SQ9_0 ((uint32_t)0x01000000) /*!< ADC SQ9 bit 0 */
+#define ADC_SQR2_SQ9_1 ((uint32_t)0x02000000) /*!< ADC SQ9 bit 1 */
+#define ADC_SQR2_SQ9_2 ((uint32_t)0x04000000) /*!< ADC SQ9 bit 2 */
+#define ADC_SQR2_SQ9_3 ((uint32_t)0x08000000) /*!< ADC SQ9 bit 3 */
+#define ADC_SQR2_SQ9_4 ((uint32_t)0x10000000) /*!< ADC SQ9 bit 4 */
+
+/******************** Bit definition for ADC_SQR3 register ********************/
+#define ADC_SQR3_SQ10 ((uint32_t)0x0000001F) /*!< ADC 10th conversion in regular sequence */
+#define ADC_SQR3_SQ10_0 ((uint32_t)0x00000001) /*!< ADC SQ10 bit 0 */
+#define ADC_SQR3_SQ10_1 ((uint32_t)0x00000002) /*!< ADC SQ10 bit 1 */
+#define ADC_SQR3_SQ10_2 ((uint32_t)0x00000004) /*!< ADC SQ10 bit 2 */
+#define ADC_SQR3_SQ10_3 ((uint32_t)0x00000008) /*!< ADC SQ10 bit 3 */
+#define ADC_SQR3_SQ10_4 ((uint32_t)0x00000010) /*!< ADC SQ10 bit 4 */
+
+#define ADC_SQR3_SQ11 ((uint32_t)0x000007C0) /*!< ADC 11th conversion in regular sequence */
+#define ADC_SQR3_SQ11_0 ((uint32_t)0x00000040) /*!< ADC SQ11 bit 0 */
+#define ADC_SQR3_SQ11_1 ((uint32_t)0x00000080) /*!< ADC SQ11 bit 1 */
+#define ADC_SQR3_SQ11_2 ((uint32_t)0x00000100) /*!< ADC SQ11 bit 2 */
+#define ADC_SQR3_SQ11_3 ((uint32_t)0x00000200) /*!< ADC SQ11 bit 3 */
+#define ADC_SQR3_SQ11_4 ((uint32_t)0x00000400) /*!< ADC SQ11 bit 4 */
+
+#define ADC_SQR3_SQ12 ((uint32_t)0x0001F000) /*!< ADC 12th conversion in regular sequence */
+#define ADC_SQR3_SQ12_0 ((uint32_t)0x00001000) /*!< ADC SQ12 bit 0 */
+#define ADC_SQR3_SQ12_1 ((uint32_t)0x00002000) /*!< ADC SQ12 bit 1 */
+#define ADC_SQR3_SQ12_2 ((uint32_t)0x00004000) /*!< ADC SQ12 bit 2 */
+#define ADC_SQR3_SQ12_3 ((uint32_t)0x00008000) /*!< ADC SQ12 bit 3 */
+#define ADC_SQR3_SQ12_4 ((uint32_t)0x00010000) /*!< ADC SQ12 bit 4 */
+
+#define ADC_SQR3_SQ13 ((uint32_t)0x007C0000) /*!< ADC 13th conversion in regular sequence */
+#define ADC_SQR3_SQ13_0 ((uint32_t)0x00040000) /*!< ADC SQ13 bit 0 */
+#define ADC_SQR3_SQ13_1 ((uint32_t)0x00080000) /*!< ADC SQ13 bit 1 */
+#define ADC_SQR3_SQ13_2 ((uint32_t)0x00100000) /*!< ADC SQ13 bit 2 */
+#define ADC_SQR3_SQ13_3 ((uint32_t)0x00200000) /*!< ADC SQ13 bit 3 */
+#define ADC_SQR3_SQ13_4 ((uint32_t)0x00400000) /*!< ADC SQ13 bit 4 */
+
+#define ADC_SQR3_SQ14 ((uint32_t)0x1F000000) /*!< ADC 14th conversion in regular sequence */
+#define ADC_SQR3_SQ14_0 ((uint32_t)0x01000000) /*!< ADC SQ14 bit 0 */
+#define ADC_SQR3_SQ14_1 ((uint32_t)0x02000000) /*!< ADC SQ14 bit 1 */
+#define ADC_SQR3_SQ14_2 ((uint32_t)0x04000000) /*!< ADC SQ14 bit 2 */
+#define ADC_SQR3_SQ14_3 ((uint32_t)0x08000000) /*!< ADC SQ14 bit 3 */
+#define ADC_SQR3_SQ14_4 ((uint32_t)0x10000000) /*!< ADC SQ14 bit 4 */
+
+/******************** Bit definition for ADC_SQR4 register ********************/
+#define ADC_SQR3_SQ15 ((uint32_t)0x0000001F) /*!< ADC 15th conversion in regular sequence */
+#define ADC_SQR3_SQ15_0 ((uint32_t)0x00000001) /*!< ADC SQ15 bit 0 */
+#define ADC_SQR3_SQ15_1 ((uint32_t)0x00000002) /*!< ADC SQ15 bit 1 */
+#define ADC_SQR3_SQ15_2 ((uint32_t)0x00000004) /*!< ADC SQ15 bit 2 */
+#define ADC_SQR3_SQ15_3 ((uint32_t)0x00000008) /*!< ADC SQ15 bit 3 */
+#define ADC_SQR3_SQ15_4 ((uint32_t)0x00000010) /*!< ADC SQ105 bit 4 */
+
+#define ADC_SQR3_SQ16 ((uint32_t)0x000007C0) /*!< ADC 16th conversion in regular sequence */
+#define ADC_SQR3_SQ16_0 ((uint32_t)0x00000040) /*!< ADC SQ16 bit 0 */
+#define ADC_SQR3_SQ16_1 ((uint32_t)0x00000080) /*!< ADC SQ16 bit 1 */
+#define ADC_SQR3_SQ16_2 ((uint32_t)0x00000100) /*!< ADC SQ16 bit 2 */
+#define ADC_SQR3_SQ16_3 ((uint32_t)0x00000200) /*!< ADC SQ16 bit 3 */
+#define ADC_SQR3_SQ16_4 ((uint32_t)0x00000400) /*!< ADC SQ16 bit 4 */
+/******************** Bit definition for ADC_DR register ********************/
+#define ADC_DR_RDATA ((uint32_t)0x0000FFFF) /*!< ADC regular Data converted */
+#define ADC_DR_RDATA_0 ((uint32_t)0x00000001) /*!< ADC RDATA bit 0 */
+#define ADC_DR_RDATA_1 ((uint32_t)0x00000002) /*!< ADC RDATA bit 1 */
+#define ADC_DR_RDATA_2 ((uint32_t)0x00000004) /*!< ADC RDATA bit 2 */
+#define ADC_DR_RDATA_3 ((uint32_t)0x00000008) /*!< ADC RDATA bit 3 */
+#define ADC_DR_RDATA_4 ((uint32_t)0x00000010) /*!< ADC RDATA bit 4 */
+#define ADC_DR_RDATA_5 ((uint32_t)0x00000020) /*!< ADC RDATA bit 5 */
+#define ADC_DR_RDATA_6 ((uint32_t)0x00000040) /*!< ADC RDATA bit 6 */
+#define ADC_DR_RDATA_7 ((uint32_t)0x00000080) /*!< ADC RDATA bit 7 */
+#define ADC_DR_RDATA_8 ((uint32_t)0x00000100) /*!< ADC RDATA bit 8 */
+#define ADC_DR_RDATA_9 ((uint32_t)0x00000200) /*!< ADC RDATA bit 9 */
+#define ADC_DR_RDATA_10 ((uint32_t)0x00000400) /*!< ADC RDATA bit 10 */
+#define ADC_DR_RDATA_11 ((uint32_t)0x00000800) /*!< ADC RDATA bit 11 */
+#define ADC_DR_RDATA_12 ((uint32_t)0x00001000) /*!< ADC RDATA bit 12 */
+#define ADC_DR_RDATA_13 ((uint32_t)0x00002000) /*!< ADC RDATA bit 13 */
+#define ADC_DR_RDATA_14 ((uint32_t)0x00004000) /*!< ADC RDATA bit 14 */
+#define ADC_DR_RDATA_15 ((uint32_t)0x00008000) /*!< ADC RDATA bit 15 */
+
+/******************** Bit definition for ADC_JSQR register ********************/
+#define ADC_JSQR_JL ((uint32_t)0x00000003) /*!< ADC injected channel sequence length */
+#define ADC_JSQR_JL_0 ((uint32_t)0x00000001) /*!< ADC JL bit 0 */
+#define ADC_JSQR_JL_1 ((uint32_t)0x00000002) /*!< ADC JL bit 1 */
+
+#define ADC_JSQR_JEXTSEL ((uint32_t)0x0000003C) /*!< ADC external trigger selection for injected group */
+#define ADC_JSQR_JEXTSEL_0 ((uint32_t)0x00000004) /*!< ADC JEXTSEL bit 0 */
+#define ADC_JSQR_JEXTSEL_1 ((uint32_t)0x00000008) /*!< ADC JEXTSEL bit 1 */
+#define ADC_JSQR_JEXTSEL_2 ((uint32_t)0x00000010) /*!< ADC JEXTSEL bit 2 */
+#define ADC_JSQR_JEXTSEL_3 ((uint32_t)0x00000020) /*!< ADC JEXTSEL bit 3 */
+
+#define ADC_JSQR_JEXTEN ((uint32_t)0x000000C0) /*!< ADC external trigger enable and polarity selection for injected channels */
+#define ADC_JSQR_JEXTEN_0 ((uint32_t)0x00000040) /*!< ADC JEXTEN bit 0 */
+#define ADC_JSQR_JEXTEN_1 ((uint32_t)0x00000080) /*!< ADC JEXTEN bit 1 */
+
+#define ADC_JSQR_JSQ1 ((uint32_t)0x00001F00) /*!< ADC 1st conversion in injected sequence */
+#define ADC_JSQR_JSQ1_0 ((uint32_t)0x00000100) /*!< ADC JSQ1 bit 0 */
+#define ADC_JSQR_JSQ1_1 ((uint32_t)0x00000200) /*!< ADC JSQ1 bit 1 */
+#define ADC_JSQR_JSQ1_2 ((uint32_t)0x00000400) /*!< ADC JSQ1 bit 2 */
+#define ADC_JSQR_JSQ1_3 ((uint32_t)0x00000800) /*!< ADC JSQ1 bit 3 */
+#define ADC_JSQR_JSQ1_4 ((uint32_t)0x00001000) /*!< ADC JSQ1 bit 4 */
+
+#define ADC_JSQR_JSQ2 ((uint32_t)0x0007C000) /*!< ADC 2nd conversion in injected sequence */
+#define ADC_JSQR_JSQ2_0 ((uint32_t)0x00004000) /*!< ADC JSQ2 bit 0 */
+#define ADC_JSQR_JSQ2_1 ((uint32_t)0x00008000) /*!< ADC JSQ2 bit 1 */
+#define ADC_JSQR_JSQ2_2 ((uint32_t)0x00010000) /*!< ADC JSQ2 bit 2 */
+#define ADC_JSQR_JSQ2_3 ((uint32_t)0x00020000) /*!< ADC JSQ2 bit 3 */
+#define ADC_JSQR_JSQ2_4 ((uint32_t)0x00040000) /*!< ADC JSQ2 bit 4 */
+
+#define ADC_JSQR_JSQ3 ((uint32_t)0x01F00000) /*!< ADC 3rd conversion in injected sequence */
+#define ADC_JSQR_JSQ3_0 ((uint32_t)0x00100000) /*!< ADC JSQ3 bit 0 */
+#define ADC_JSQR_JSQ3_1 ((uint32_t)0x00200000) /*!< ADC JSQ3 bit 1 */
+#define ADC_JSQR_JSQ3_2 ((uint32_t)0x00400000) /*!< ADC JSQ3 bit 2 */
+#define ADC_JSQR_JSQ3_3 ((uint32_t)0x00800000) /*!< ADC JSQ3 bit 3 */
+#define ADC_JSQR_JSQ3_4 ((uint32_t)0x01000000) /*!< ADC JSQ3 bit 4 */
+
+#define ADC_JSQR_JSQ4 ((uint32_t)0x7C000000) /*!< ADC 4th conversion in injected sequence */
+#define ADC_JSQR_JSQ4_0 ((uint32_t)0x04000000) /*!< ADC JSQ4 bit 0 */
+#define ADC_JSQR_JSQ4_1 ((uint32_t)0x08000000) /*!< ADC JSQ4 bit 1 */
+#define ADC_JSQR_JSQ4_2 ((uint32_t)0x10000000) /*!< ADC JSQ4 bit 2 */
+#define ADC_JSQR_JSQ4_3 ((uint32_t)0x20000000) /*!< ADC JSQ4 bit 3 */
+#define ADC_JSQR_JSQ4_4 ((uint32_t)0x40000000) /*!< ADC JSQ4 bit 4 */
+
+/******************** Bit definition for ADC_OFR1 register ********************/
+#define ADC_OFR1_OFFSET1 ((uint32_t)0x00000FFF) /*!< ADC data offset 1 for channel programmed into bits OFFSET1_CH[4:0] */
+#define ADC_OFR1_OFFSET1_0 ((uint32_t)0x00000001) /*!< ADC OFFSET1 bit 0 */
+#define ADC_OFR1_OFFSET1_1 ((uint32_t)0x00000002) /*!< ADC OFFSET1 bit 1 */
+#define ADC_OFR1_OFFSET1_2 ((uint32_t)0x00000004) /*!< ADC OFFSET1 bit 2 */
+#define ADC_OFR1_OFFSET1_3 ((uint32_t)0x00000008) /*!< ADC OFFSET1 bit 3 */
+#define ADC_OFR1_OFFSET1_4 ((uint32_t)0x00000010) /*!< ADC OFFSET1 bit 4 */
+#define ADC_OFR1_OFFSET1_5 ((uint32_t)0x00000020) /*!< ADC OFFSET1 bit 5 */
+#define ADC_OFR1_OFFSET1_6 ((uint32_t)0x00000040) /*!< ADC OFFSET1 bit 6 */
+#define ADC_OFR1_OFFSET1_7 ((uint32_t)0x00000080) /*!< ADC OFFSET1 bit 7 */
+#define ADC_OFR1_OFFSET1_8 ((uint32_t)0x00000100) /*!< ADC OFFSET1 bit 8 */
+#define ADC_OFR1_OFFSET1_9 ((uint32_t)0x00000200) /*!< ADC OFFSET1 bit 9 */
+#define ADC_OFR1_OFFSET1_10 ((uint32_t)0x00000400) /*!< ADC OFFSET1 bit 10 */
+#define ADC_OFR1_OFFSET1_11 ((uint32_t)0x00000800) /*!< ADC OFFSET1 bit 11 */
+
+#define ADC_OFR1_OFFSET1_CH ((uint32_t)0x7C000000) /*!< ADC Channel selection for the data offset 1 */
+#define ADC_OFR1_OFFSET1_CH_0 ((uint32_t)0x04000000) /*!< ADC OFFSET1_CH bit 0 */
+#define ADC_OFR1_OFFSET1_CH_1 ((uint32_t)0x08000000) /*!< ADC OFFSET1_CH bit 1 */
+#define ADC_OFR1_OFFSET1_CH_2 ((uint32_t)0x10000000) /*!< ADC OFFSET1_CH bit 2 */
+#define ADC_OFR1_OFFSET1_CH_3 ((uint32_t)0x20000000) /*!< ADC OFFSET1_CH bit 3 */
+#define ADC_OFR1_OFFSET1_CH_4 ((uint32_t)0x40000000) /*!< ADC OFFSET1_CH bit 4 */
+
+#define ADC_OFR1_OFFSET1_EN ((uint32_t)0x80000000) /*!< ADC offset 1 enable */
+
+/******************** Bit definition for ADC_OFR2 register ********************/
+#define ADC_OFR2_OFFSET2 ((uint32_t)0x00000FFF) /*!< ADC data offset 2 for channel programmed into bits OFFSET2_CH[4:0] */
+#define ADC_OFR2_OFFSET2_0 ((uint32_t)0x00000001) /*!< ADC OFFSET2 bit 0 */
+#define ADC_OFR2_OFFSET2_1 ((uint32_t)0x00000002) /*!< ADC OFFSET2 bit 1 */
+#define ADC_OFR2_OFFSET2_2 ((uint32_t)0x00000004) /*!< ADC OFFSET2 bit 2 */
+#define ADC_OFR2_OFFSET2_3 ((uint32_t)0x00000008) /*!< ADC OFFSET2 bit 3 */
+#define ADC_OFR2_OFFSET2_4 ((uint32_t)0x00000010) /*!< ADC OFFSET2 bit 4 */
+#define ADC_OFR2_OFFSET2_5 ((uint32_t)0x00000020) /*!< ADC OFFSET2 bit 5 */
+#define ADC_OFR2_OFFSET2_6 ((uint32_t)0x00000040) /*!< ADC OFFSET2 bit 6 */
+#define ADC_OFR2_OFFSET2_7 ((uint32_t)0x00000080) /*!< ADC OFFSET2 bit 7 */
+#define ADC_OFR2_OFFSET2_8 ((uint32_t)0x00000100) /*!< ADC OFFSET2 bit 8 */
+#define ADC_OFR2_OFFSET2_9 ((uint32_t)0x00000200) /*!< ADC OFFSET2 bit 9 */
+#define ADC_OFR2_OFFSET2_10 ((uint32_t)0x00000400) /*!< ADC OFFSET2 bit 10 */
+#define ADC_OFR2_OFFSET2_11 ((uint32_t)0x00000800) /*!< ADC OFFSET2 bit 11 */
+
+#define ADC_OFR2_OFFSET2_CH ((uint32_t)0x7C000000) /*!< ADC Channel selection for the data offset 2 */
+#define ADC_OFR2_OFFSET2_CH_0 ((uint32_t)0x04000000) /*!< ADC OFFSET2_CH bit 0 */
+#define ADC_OFR2_OFFSET2_CH_1 ((uint32_t)0x08000000) /*!< ADC OFFSET2_CH bit 1 */
+#define ADC_OFR2_OFFSET2_CH_2 ((uint32_t)0x10000000) /*!< ADC OFFSET2_CH bit 2 */
+#define ADC_OFR2_OFFSET2_CH_3 ((uint32_t)0x20000000) /*!< ADC OFFSET2_CH bit 3 */
+#define ADC_OFR2_OFFSET2_CH_4 ((uint32_t)0x40000000) /*!< ADC OFFSET2_CH bit 4 */
+
+#define ADC_OFR2_OFFSET2_EN ((uint32_t)0x80000000) /*!< ADC offset 2 enable */
+
+/******************** Bit definition for ADC_OFR3 register ********************/
+#define ADC_OFR3_OFFSET3 ((uint32_t)0x00000FFF) /*!< ADC data offset 3 for channel programmed into bits OFFSET3_CH[4:0] */
+#define ADC_OFR3_OFFSET3_0 ((uint32_t)0x00000001) /*!< ADC OFFSET3 bit 0 */
+#define ADC_OFR3_OFFSET3_1 ((uint32_t)0x00000002) /*!< ADC OFFSET3 bit 1 */
+#define ADC_OFR3_OFFSET3_2 ((uint32_t)0x00000004) /*!< ADC OFFSET3 bit 2 */
+#define ADC_OFR3_OFFSET3_3 ((uint32_t)0x00000008) /*!< ADC OFFSET3 bit 3 */
+#define ADC_OFR3_OFFSET3_4 ((uint32_t)0x00000010) /*!< ADC OFFSET3 bit 4 */
+#define ADC_OFR3_OFFSET3_5 ((uint32_t)0x00000020) /*!< ADC OFFSET3 bit 5 */
+#define ADC_OFR3_OFFSET3_6 ((uint32_t)0x00000040) /*!< ADC OFFSET3 bit 6 */
+#define ADC_OFR3_OFFSET3_7 ((uint32_t)0x00000080) /*!< ADC OFFSET3 bit 7 */
+#define ADC_OFR3_OFFSET3_8 ((uint32_t)0x00000100) /*!< ADC OFFSET3 bit 8 */
+#define ADC_OFR3_OFFSET3_9 ((uint32_t)0x00000200) /*!< ADC OFFSET3 bit 9 */
+#define ADC_OFR3_OFFSET3_10 ((uint32_t)0x00000400) /*!< ADC OFFSET3 bit 10 */
+#define ADC_OFR3_OFFSET3_11 ((uint32_t)0x00000800) /*!< ADC OFFSET3 bit 11 */
+
+#define ADC_OFR3_OFFSET3_CH ((uint32_t)0x7C000000) /*!< ADC Channel selection for the data offset 3 */
+#define ADC_OFR3_OFFSET3_CH_0 ((uint32_t)0x04000000) /*!< ADC OFFSET3_CH bit 0 */
+#define ADC_OFR3_OFFSET3_CH_1 ((uint32_t)0x08000000) /*!< ADC OFFSET3_CH bit 1 */
+#define ADC_OFR3_OFFSET3_CH_2 ((uint32_t)0x10000000) /*!< ADC OFFSET3_CH bit 2 */
+#define ADC_OFR3_OFFSET3_CH_3 ((uint32_t)0x20000000) /*!< ADC OFFSET3_CH bit 3 */
+#define ADC_OFR3_OFFSET3_CH_4 ((uint32_t)0x40000000) /*!< ADC OFFSET3_CH bit 4 */
+
+#define ADC_OFR3_OFFSET3_EN ((uint32_t)0x80000000) /*!< ADC offset 3 enable */
+
+/******************** Bit definition for ADC_OFR4 register ********************/
+#define ADC_OFR4_OFFSET4 ((uint32_t)0x00000FFF) /*!< ADC data offset 4 for channel programmed into bits OFFSET4_CH[4:0] */
+#define ADC_OFR4_OFFSET4_0 ((uint32_t)0x00000001) /*!< ADC OFFSET4 bit 0 */
+#define ADC_OFR4_OFFSET4_1 ((uint32_t)0x00000002) /*!< ADC OFFSET4 bit 1 */
+#define ADC_OFR4_OFFSET4_2 ((uint32_t)0x00000004) /*!< ADC OFFSET4 bit 2 */
+#define ADC_OFR4_OFFSET4_3 ((uint32_t)0x00000008) /*!< ADC OFFSET4 bit 3 */
+#define ADC_OFR4_OFFSET4_4 ((uint32_t)0x00000010) /*!< ADC OFFSET4 bit 4 */
+#define ADC_OFR4_OFFSET4_5 ((uint32_t)0x00000020) /*!< ADC OFFSET4 bit 5 */
+#define ADC_OFR4_OFFSET4_6 ((uint32_t)0x00000040) /*!< ADC OFFSET4 bit 6 */
+#define ADC_OFR4_OFFSET4_7 ((uint32_t)0x00000080) /*!< ADC OFFSET4 bit 7 */
+#define ADC_OFR4_OFFSET4_8 ((uint32_t)0x00000100) /*!< ADC OFFSET4 bit 8 */
+#define ADC_OFR4_OFFSET4_9 ((uint32_t)0x00000200) /*!< ADC OFFSET4 bit 9 */
+#define ADC_OFR4_OFFSET4_10 ((uint32_t)0x00000400) /*!< ADC OFFSET4 bit 10 */
+#define ADC_OFR4_OFFSET4_11 ((uint32_t)0x00000800) /*!< ADC OFFSET4 bit 11 */
+
+#define ADC_OFR4_OFFSET4_CH ((uint32_t)0x7C000000) /*!< ADC Channel selection for the data offset 4 */
+#define ADC_OFR4_OFFSET4_CH_0 ((uint32_t)0x04000000) /*!< ADC OFFSET4_CH bit 0 */
+#define ADC_OFR4_OFFSET4_CH_1 ((uint32_t)0x08000000) /*!< ADC OFFSET4_CH bit 1 */
+#define ADC_OFR4_OFFSET4_CH_2 ((uint32_t)0x10000000) /*!< ADC OFFSET4_CH bit 2 */
+#define ADC_OFR4_OFFSET4_CH_3 ((uint32_t)0x20000000) /*!< ADC OFFSET4_CH bit 3 */
+#define ADC_OFR4_OFFSET4_CH_4 ((uint32_t)0x40000000) /*!< ADC OFFSET4_CH bit 4 */
+
+#define ADC_OFR4_OFFSET4_EN ((uint32_t)0x80000000) /*!< ADC offset 4 enable */
+
+/******************** Bit definition for ADC_JDR1 register ********************/
+#define ADC_JDR1_JDATA ((uint32_t)0x0000FFFF) /*!< ADC Injected DATA */
+#define ADC_JDR1_JDATA_0 ((uint32_t)0x00000001) /*!< ADC JDATA bit 0 */
+#define ADC_JDR1_JDATA_1 ((uint32_t)0x00000002) /*!< ADC JDATA bit 1 */
+#define ADC_JDR1_JDATA_2 ((uint32_t)0x00000004) /*!< ADC JDATA bit 2 */
+#define ADC_JDR1_JDATA_3 ((uint32_t)0x00000008) /*!< ADC JDATA bit 3 */
+#define ADC_JDR1_JDATA_4 ((uint32_t)0x00000010) /*!< ADC JDATA bit 4 */
+#define ADC_JDR1_JDATA_5 ((uint32_t)0x00000020) /*!< ADC JDATA bit 5 */
+#define ADC_JDR1_JDATA_6 ((uint32_t)0x00000040) /*!< ADC JDATA bit 6 */
+#define ADC_JDR1_JDATA_7 ((uint32_t)0x00000080) /*!< ADC JDATA bit 7 */
+#define ADC_JDR1_JDATA_8 ((uint32_t)0x00000100) /*!< ADC JDATA bit 8 */
+#define ADC_JDR1_JDATA_9 ((uint32_t)0x00000200) /*!< ADC JDATA bit 9 */
+#define ADC_JDR1_JDATA_10 ((uint32_t)0x00000400) /*!< ADC JDATA bit 10 */
+#define ADC_JDR1_JDATA_11 ((uint32_t)0x00000800) /*!< ADC JDATA bit 11 */
+#define ADC_JDR1_JDATA_12 ((uint32_t)0x00001000) /*!< ADC JDATA bit 12 */
+#define ADC_JDR1_JDATA_13 ((uint32_t)0x00002000) /*!< ADC JDATA bit 13 */
+#define ADC_JDR1_JDATA_14 ((uint32_t)0x00004000) /*!< ADC JDATA bit 14 */
+#define ADC_JDR1_JDATA_15 ((uint32_t)0x00008000) /*!< ADC JDATA bit 15 */
+
+/******************** Bit definition for ADC_JDR2 register ********************/
+#define ADC_JDR2_JDATA ((uint32_t)0x0000FFFF) /*!< ADC Injected DATA */
+#define ADC_JDR2_JDATA_0 ((uint32_t)0x00000001) /*!< ADC JDATA bit 0 */
+#define ADC_JDR2_JDATA_1 ((uint32_t)0x00000002) /*!< ADC JDATA bit 1 */
+#define ADC_JDR2_JDATA_2 ((uint32_t)0x00000004) /*!< ADC JDATA bit 2 */
+#define ADC_JDR2_JDATA_3 ((uint32_t)0x00000008) /*!< ADC JDATA bit 3 */
+#define ADC_JDR2_JDATA_4 ((uint32_t)0x00000010) /*!< ADC JDATA bit 4 */
+#define ADC_JDR2_JDATA_5 ((uint32_t)0x00000020) /*!< ADC JDATA bit 5 */
+#define ADC_JDR2_JDATA_6 ((uint32_t)0x00000040) /*!< ADC JDATA bit 6 */
+#define ADC_JDR2_JDATA_7 ((uint32_t)0x00000080) /*!< ADC JDATA bit 7 */
+#define ADC_JDR2_JDATA_8 ((uint32_t)0x00000100) /*!< ADC JDATA bit 8 */
+#define ADC_JDR2_JDATA_9 ((uint32_t)0x00000200) /*!< ADC JDATA bit 9 */
+#define ADC_JDR2_JDATA_10 ((uint32_t)0x00000400) /*!< ADC JDATA bit 10 */
+#define ADC_JDR2_JDATA_11 ((uint32_t)0x00000800) /*!< ADC JDATA bit 11 */
+#define ADC_JDR2_JDATA_12 ((uint32_t)0x00001000) /*!< ADC JDATA bit 12 */
+#define ADC_JDR2_JDATA_13 ((uint32_t)0x00002000) /*!< ADC JDATA bit 13 */
+#define ADC_JDR2_JDATA_14 ((uint32_t)0x00004000) /*!< ADC JDATA bit 14 */
+#define ADC_JDR2_JDATA_15 ((uint32_t)0x00008000) /*!< ADC JDATA bit 15 */
+
+/******************** Bit definition for ADC_JDR3 register ********************/
+#define ADC_JDR3_JDATA ((uint32_t)0x0000FFFF) /*!< ADC Injected DATA */
+#define ADC_JDR3_JDATA_0 ((uint32_t)0x00000001) /*!< ADC JDATA bit 0 */
+#define ADC_JDR3_JDATA_1 ((uint32_t)0x00000002) /*!< ADC JDATA bit 1 */
+#define ADC_JDR3_JDATA_2 ((uint32_t)0x00000004) /*!< ADC JDATA bit 2 */
+#define ADC_JDR3_JDATA_3 ((uint32_t)0x00000008) /*!< ADC JDATA bit 3 */
+#define ADC_JDR3_JDATA_4 ((uint32_t)0x00000010) /*!< ADC JDATA bit 4 */
+#define ADC_JDR3_JDATA_5 ((uint32_t)0x00000020) /*!< ADC JDATA bit 5 */
+#define ADC_JDR3_JDATA_6 ((uint32_t)0x00000040) /*!< ADC JDATA bit 6 */
+#define ADC_JDR3_JDATA_7 ((uint32_t)0x00000080) /*!< ADC JDATA bit 7 */
+#define ADC_JDR3_JDATA_8 ((uint32_t)0x00000100) /*!< ADC JDATA bit 8 */
+#define ADC_JDR3_JDATA_9 ((uint32_t)0x00000200) /*!< ADC JDATA bit 9 */
+#define ADC_JDR3_JDATA_10 ((uint32_t)0x00000400) /*!< ADC JDATA bit 10 */
+#define ADC_JDR3_JDATA_11 ((uint32_t)0x00000800) /*!< ADC JDATA bit 11 */
+#define ADC_JDR3_JDATA_12 ((uint32_t)0x00001000) /*!< ADC JDATA bit 12 */
+#define ADC_JDR3_JDATA_13 ((uint32_t)0x00002000) /*!< ADC JDATA bit 13 */
+#define ADC_JDR3_JDATA_14 ((uint32_t)0x00004000) /*!< ADC JDATA bit 14 */
+#define ADC_JDR3_JDATA_15 ((uint32_t)0x00008000) /*!< ADC JDATA bit 15 */
+
+/******************** Bit definition for ADC_JDR4 register ********************/
+#define ADC_JDR4_JDATA ((uint32_t)0x0000FFFF) /*!< ADC Injected DATA */
+#define ADC_JDR4_JDATA_0 ((uint32_t)0x00000001) /*!< ADC JDATA bit 0 */
+#define ADC_JDR4_JDATA_1 ((uint32_t)0x00000002) /*!< ADC JDATA bit 1 */
+#define ADC_JDR4_JDATA_2 ((uint32_t)0x00000004) /*!< ADC JDATA bit 2 */
+#define ADC_JDR4_JDATA_3 ((uint32_t)0x00000008) /*!< ADC JDATA bit 3 */
+#define ADC_JDR4_JDATA_4 ((uint32_t)0x00000010) /*!< ADC JDATA bit 4 */
+#define ADC_JDR4_JDATA_5 ((uint32_t)0x00000020) /*!< ADC JDATA bit 5 */
+#define ADC_JDR4_JDATA_6 ((uint32_t)0x00000040) /*!< ADC JDATA bit 6 */
+#define ADC_JDR4_JDATA_7 ((uint32_t)0x00000080) /*!< ADC JDATA bit 7 */
+#define ADC_JDR4_JDATA_8 ((uint32_t)0x00000100) /*!< ADC JDATA bit 8 */
+#define ADC_JDR4_JDATA_9 ((uint32_t)0x00000200) /*!< ADC JDATA bit 9 */
+#define ADC_JDR4_JDATA_10 ((uint32_t)0x00000400) /*!< ADC JDATA bit 10 */
+#define ADC_JDR4_JDATA_11 ((uint32_t)0x00000800) /*!< ADC JDATA bit 11 */
+#define ADC_JDR4_JDATA_12 ((uint32_t)0x00001000) /*!< ADC JDATA bit 12 */
+#define ADC_JDR4_JDATA_13 ((uint32_t)0x00002000) /*!< ADC JDATA bit 13 */
+#define ADC_JDR4_JDATA_14 ((uint32_t)0x00004000) /*!< ADC JDATA bit 14 */
+#define ADC_JDR4_JDATA_15 ((uint32_t)0x00008000) /*!< ADC JDATA bit 15 */
+
+/******************** Bit definition for ADC_AWD2CR register ********************/
+#define ADC_AWD2CR_AWD2CH ((uint32_t)0x0007FFFE) /*!< ADC Analog watchdog 2 channel selection */
+#define ADC_AWD2CR_AWD2CH_0 ((uint32_t)0x00000002) /*!< ADC AWD2CH bit 0 */
+#define ADC_AWD2CR_AWD2CH_1 ((uint32_t)0x00000004) /*!< ADC AWD2CH bit 1 */
+#define ADC_AWD2CR_AWD2CH_2 ((uint32_t)0x00000008) /*!< ADC AWD2CH bit 2 */
+#define ADC_AWD2CR_AWD2CH_3 ((uint32_t)0x00000010) /*!< ADC AWD2CH bit 3 */
+#define ADC_AWD2CR_AWD2CH_4 ((uint32_t)0x00000020) /*!< ADC AWD2CH bit 4 */
+#define ADC_AWD2CR_AWD2CH_5 ((uint32_t)0x00000040) /*!< ADC AWD2CH bit 5 */
+#define ADC_AWD2CR_AWD2CH_6 ((uint32_t)0x00000080) /*!< ADC AWD2CH bit 6 */
+#define ADC_AWD2CR_AWD2CH_7 ((uint32_t)0x00000100) /*!< ADC AWD2CH bit 7 */
+#define ADC_AWD2CR_AWD2CH_8 ((uint32_t)0x00000200) /*!< ADC AWD2CH bit 8 */
+#define ADC_AWD2CR_AWD2CH_9 ((uint32_t)0x00000400) /*!< ADC AWD2CH bit 9 */
+#define ADC_AWD2CR_AWD2CH_10 ((uint32_t)0x00000800) /*!< ADC AWD2CH bit 10 */
+#define ADC_AWD2CR_AWD2CH_11 ((uint32_t)0x00001000) /*!< ADC AWD2CH bit 11 */
+#define ADC_AWD2CR_AWD2CH_12 ((uint32_t)0x00002000) /*!< ADC AWD2CH bit 12 */
+#define ADC_AWD2CR_AWD2CH_13 ((uint32_t)0x00004000) /*!< ADC AWD2CH bit 13 */
+#define ADC_AWD2CR_AWD2CH_14 ((uint32_t)0x00008000) /*!< ADC AWD2CH bit 14 */
+#define ADC_AWD2CR_AWD2CH_15 ((uint32_t)0x00010000) /*!< ADC AWD2CH bit 15 */
+#define ADC_AWD2CR_AWD2CH_16 ((uint32_t)0x00020000) /*!< ADC AWD2CH bit 16 */
+#define ADC_AWD2CR_AWD2CH_17 ((uint32_t)0x00030000) /*!< ADC AWD2CH bit 17 */
+
+/******************** Bit definition for ADC_AWD3CR register ********************/
+#define ADC_AWD3CR_AWD3CH ((uint32_t)0x0007FFFE) /*!< ADC Analog watchdog 2 channel selection */
+#define ADC_AWD3CR_AWD3CH_0 ((uint32_t)0x00000002) /*!< ADC AWD3CH bit 0 */
+#define ADC_AWD3CR_AWD3CH_1 ((uint32_t)0x00000004) /*!< ADC AWD3CH bit 1 */
+#define ADC_AWD3CR_AWD3CH_2 ((uint32_t)0x00000008) /*!< ADC AWD3CH bit 2 */
+#define ADC_AWD3CR_AWD3CH_3 ((uint32_t)0x00000010) /*!< ADC AWD3CH bit 3 */
+#define ADC_AWD3CR_AWD3CH_4 ((uint32_t)0x00000020) /*!< ADC AWD3CH bit 4 */
+#define ADC_AWD3CR_AWD3CH_5 ((uint32_t)0x00000040) /*!< ADC AWD3CH bit 5 */
+#define ADC_AWD3CR_AWD3CH_6 ((uint32_t)0x00000080) /*!< ADC AWD3CH bit 6 */
+#define ADC_AWD3CR_AWD3CH_7 ((uint32_t)0x00000100) /*!< ADC AWD3CH bit 7 */
+#define ADC_AWD3CR_AWD3CH_8 ((uint32_t)0x00000200) /*!< ADC AWD3CH bit 8 */
+#define ADC_AWD3CR_AWD3CH_9 ((uint32_t)0x00000400) /*!< ADC AWD3CH bit 9 */
+#define ADC_AWD3CR_AWD3CH_10 ((uint32_t)0x00000800) /*!< ADC AWD3CH bit 10 */
+#define ADC_AWD3CR_AWD3CH_11 ((uint32_t)0x00001000) /*!< ADC AWD3CH bit 11 */
+#define ADC_AWD3CR_AWD3CH_12 ((uint32_t)0x00002000) /*!< ADC AWD3CH bit 12 */
+#define ADC_AWD3CR_AWD3CH_13 ((uint32_t)0x00004000) /*!< ADC AWD3CH bit 13 */
+#define ADC_AWD3CR_AWD3CH_14 ((uint32_t)0x00008000) /*!< ADC AWD3CH bit 14 */
+#define ADC_AWD3CR_AWD3CH_15 ((uint32_t)0x00010000) /*!< ADC AWD3CH bit 15 */
+#define ADC_AWD3CR_AWD3CH_16 ((uint32_t)0x00020000) /*!< ADC AWD3CH bit 16 */
+#define ADC_AWD3CR_AWD3CH_17 ((uint32_t)0x00030000) /*!< ADC AWD3CH bit 17 */
+
+/******************** Bit definition for ADC_DIFSEL register ********************/
+#define ADC_DIFSEL_DIFSEL ((uint32_t)0x0007FFFE) /*!< ADC differential modes for channels 1 to 18 */
+#define ADC_DIFSEL_DIFSEL_0 ((uint32_t)0x00000002) /*!< ADC DIFSEL bit 0 */
+#define ADC_DIFSEL_DIFSEL_1 ((uint32_t)0x00000004) /*!< ADC DIFSEL bit 1 */
+#define ADC_DIFSEL_DIFSEL_2 ((uint32_t)0x00000008) /*!< ADC DIFSEL bit 2 */
+#define ADC_DIFSEL_DIFSEL_3 ((uint32_t)0x00000010) /*!< ADC DIFSEL bit 3 */
+#define ADC_DIFSEL_DIFSEL_4 ((uint32_t)0x00000020) /*!< ADC DIFSEL bit 4 */
+#define ADC_DIFSEL_DIFSEL_5 ((uint32_t)0x00000040) /*!< ADC DIFSEL bit 5 */
+#define ADC_DIFSEL_DIFSEL_6 ((uint32_t)0x00000080) /*!< ADC DIFSEL bit 6 */
+#define ADC_DIFSEL_DIFSEL_7 ((uint32_t)0x00000100) /*!< ADC DIFSEL bit 7 */
+#define ADC_DIFSEL_DIFSEL_8 ((uint32_t)0x00000200) /*!< ADC DIFSEL bit 8 */
+#define ADC_DIFSEL_DIFSEL_9 ((uint32_t)0x00000400) /*!< ADC DIFSEL bit 9 */
+#define ADC_DIFSEL_DIFSEL_10 ((uint32_t)0x00000800) /*!< ADC DIFSEL bit 10 */
+#define ADC_DIFSEL_DIFSEL_11 ((uint32_t)0x00001000) /*!< ADC DIFSEL bit 11 */
+#define ADC_DIFSEL_DIFSEL_12 ((uint32_t)0x00002000) /*!< ADC DIFSEL bit 12 */
+#define ADC_DIFSEL_DIFSEL_13 ((uint32_t)0x00004000) /*!< ADC DIFSEL bit 13 */
+#define ADC_DIFSEL_DIFSEL_14 ((uint32_t)0x00008000) /*!< ADC DIFSEL bit 14 */
+#define ADC_DIFSEL_DIFSEL_15 ((uint32_t)0x00010000) /*!< ADC DIFSEL bit 15 */
+#define ADC_DIFSEL_DIFSEL_16 ((uint32_t)0x00020000) /*!< ADC DIFSEL bit 16 */
+#define ADC_DIFSEL_DIFSEL_17 ((uint32_t)0x00030000) /*!< ADC DIFSEL bit 17 */
+
+/******************** Bit definition for ADC_CALFACT register ********************/
+#define ADC_CALFACT_CALFACT_S ((uint32_t)0x0000007F) /*!< ADC calibration factors in single-ended mode */
+#define ADC_CALFACT_CALFACT_S_0 ((uint32_t)0x00000001) /*!< ADC CALFACT_S bit 0 */
+#define ADC_CALFACT_CALFACT_S_1 ((uint32_t)0x00000002) /*!< ADC CALFACT_S bit 1 */
+#define ADC_CALFACT_CALFACT_S_2 ((uint32_t)0x00000004) /*!< ADC CALFACT_S bit 2 */
+#define ADC_CALFACT_CALFACT_S_3 ((uint32_t)0x00000008) /*!< ADC CALFACT_S bit 3 */
+#define ADC_CALFACT_CALFACT_S_4 ((uint32_t)0x00000010) /*!< ADC CALFACT_S bit 4 */
+#define ADC_CALFACT_CALFACT_S_5 ((uint32_t)0x00000020) /*!< ADC CALFACT_S bit 5 */
+#define ADC_CALFACT_CALFACT_S_6 ((uint32_t)0x00000040) /*!< ADC CALFACT_S bit 6 */
+#define ADC_CALFACT_CALFACT_D ((uint32_t)0x007F0000) /*!< ADC calibration factors in differential mode */
+#define ADC_CALFACT_CALFACT_D_0 ((uint32_t)0x00010000) /*!< ADC CALFACT_D bit 0 */
+#define ADC_CALFACT_CALFACT_D_1 ((uint32_t)0x00020000) /*!< ADC CALFACT_D bit 1 */
+#define ADC_CALFACT_CALFACT_D_2 ((uint32_t)0x00040000) /*!< ADC CALFACT_D bit 2 */
+#define ADC_CALFACT_CALFACT_D_3 ((uint32_t)0x00080000) /*!< ADC CALFACT_D bit 3 */
+#define ADC_CALFACT_CALFACT_D_4 ((uint32_t)0x00100000) /*!< ADC CALFACT_D bit 4 */
+#define ADC_CALFACT_CALFACT_D_5 ((uint32_t)0x00200000) /*!< ADC CALFACT_D bit 5 */
+#define ADC_CALFACT_CALFACT_D_6 ((uint32_t)0x00400000) /*!< ADC CALFACT_D bit 6 */
+
+/************************* ADC Common registers *****************************/
+/******************** Bit definition for ADC12_CSR register ********************/
+#define ADC12_CSR_ADRDY_MST ((uint32_t)0x00000001) /*!< Master ADC ready */
+#define ADC12_CSR_ADRDY_EOSMP_MST ((uint32_t)0x00000002) /*!< End of sampling phase flag of the master ADC */
+#define ADC12_CSR_ADRDY_EOC_MST ((uint32_t)0x00000004) /*!< End of regular conversion of the master ADC */
+#define ADC12_CSR_ADRDY_EOS_MST ((uint32_t)0x00000008) /*!< End of regular sequence flag of the master ADC */
+#define ADC12_CSR_ADRDY_OVR_MST ((uint32_t)0x00000010) /*!< Overrun flag of the master ADC */
+#define ADC12_CSR_ADRDY_JEOC_MST ((uint32_t)0x00000020) /*!< End of injected conversion of the master ADC */
+#define ADC12_CSR_ADRDY_JEOS_MST ((uint32_t)0x00000040) /*!< End of injected sequence flag of the master ADC */
+#define ADC12_CSR_AWD1_MST ((uint32_t)0x00000080) /*!< Analog watchdog 1 flag of the master ADC */
+#define ADC12_CSR_AWD2_MST ((uint32_t)0x00000100) /*!< Analog watchdog 2 flag of the master ADC */
+#define ADC12_CSR_AWD3_MST ((uint32_t)0x00000200) /*!< Analog watchdog 3 flag of the master ADC */
+#define ADC12_CSR_JQOVF_MST ((uint32_t)0x00000400) /*!< Injected context queue overflow flag of the master ADC */
+#define ADC12_CSR_ADRDY_SLV ((uint32_t)0x00010000) /*!< Slave ADC ready */
+#define ADC12_CSR_ADRDY_EOSMP_SLV ((uint32_t)0x00020000) /*!< End of sampling phase flag of the slave ADC */
+#define ADC12_CSR_ADRDY_EOC_SLV ((uint32_t)0x00040000) /*!< End of regular conversion of the slave ADC */
+#define ADC12_CSR_ADRDY_EOS_SLV ((uint32_t)0x00080000) /*!< End of regular sequence flag of the slave ADC */
+#define ADC12_CSR_ADRDY_OVR_SLV ((uint32_t)0x00100000) /*!< Overrun flag of the slave ADC */
+#define ADC12_CSR_ADRDY_JEOC_SLV ((uint32_t)0x00200000) /*!< End of injected conversion of the slave ADC */
+#define ADC12_CSR_ADRDY_JEOS_SLV ((uint32_t)0x00400000) /*!< End of injected sequence flag of the slave ADC */
+#define ADC12_CSR_AWD1_SLV ((uint32_t)0x00800000) /*!< Analog watchdog 1 flag of the slave ADC */
+#define ADC12_CSR_AWD2_SLV ((uint32_t)0x01000000) /*!< Analog watchdog 2 flag of the slave ADC */
+#define ADC12_CSR_AWD3_SLV ((uint32_t)0x02000000) /*!< Analog watchdog 3 flag of the slave ADC */
+#define ADC12_CSR_JQOVF_SLV ((uint32_t)0x04000000) /*!< Injected context queue overflow flag of the slave ADC */
+
+/******************** Bit definition for ADC34_CSR register ********************/
+#define ADC34_CSR_ADRDY_MST ((uint32_t)0x00000001) /*!< Master ADC ready */
+#define ADC34_CSR_ADRDY_EOSMP_MST ((uint32_t)0x00000002) /*!< End of sampling phase flag of the master ADC */
+#define ADC34_CSR_ADRDY_EOC_MST ((uint32_t)0x00000004) /*!< End of regular conversion of the master ADC */
+#define ADC34_CSR_ADRDY_EOS_MST ((uint32_t)0x00000008) /*!< End of regular sequence flag of the master ADC */
+#define ADC34_CSR_ADRDY_OVR_MST ((uint32_t)0x00000010) /*!< Overrun flag of the master ADC */
+#define ADC34_CSR_ADRDY_JEOC_MST ((uint32_t)0x00000020) /*!< End of injected conversion of the master ADC */
+#define ADC34_CSR_ADRDY_JEOS_MST ((uint32_t)0x00000040) /*!< End of injected sequence flag of the master ADC */
+#define ADC34_CSR_AWD1_MST ((uint32_t)0x00000080) /*!< Analog watchdog 1 flag of the master ADC */
+#define ADC34_CSR_AWD2_MST ((uint32_t)0x00000100) /*!< Analog watchdog 2 flag of the master ADC */
+#define ADC34_CSR_AWD3_MST ((uint32_t)0x00000200) /*!< Analog watchdog 3 flag of the master ADC */
+#define ADC34_CSR_JQOVF_MST ((uint32_t)0x00000400) /*!< Injected context queue overflow flag of the master ADC */
+#define ADC34_CSR_ADRDY_SLV ((uint32_t)0x00010000) /*!< Slave ADC ready */
+#define ADC34_CSR_ADRDY_EOSMP_SLV ((uint32_t)0x00020000) /*!< End of sampling phase flag of the slave ADC */
+#define ADC34_CSR_ADRDY_EOC_SLV ((uint32_t)0x00040000) /*!< End of regular conversion of the slave ADC */
+#define ADC34_CSR_ADRDY_EOS_SLV ((uint32_t)0x00080000) /*!< End of regular sequence flag of the slave ADC */
+#define ADC12_CSR_ADRDY_OVR_SLV ((uint32_t)0x00100000) /*!< Overrun flag of the slave ADC */
+#define ADC34_CSR_ADRDY_JEOC_SLV ((uint32_t)0x00200000) /*!< End of injected conversion of the slave ADC */
+#define ADC34_CSR_ADRDY_JEOS_SLV ((uint32_t)0x00400000) /*!< End of injected sequence flag of the slave ADC */
+#define ADC34_CSR_AWD1_SLV ((uint32_t)0x00800000) /*!< Analog watchdog 1 flag of the slave ADC */
+#define ADC34_CSR_AWD2_SLV ((uint32_t)0x01000000) /*!< Analog watchdog 2 flag of the slave ADC */
+#define ADC34_CSR_AWD3_SLV ((uint32_t)0x02000000) /*!< Analog watchdog 3 flag of the slave ADC */
+#define ADC34_CSR_JQOVF_SLV ((uint32_t)0x04000000) /*!< Injected context queue overflow flag of the slave ADC */
+
+/******************** Bit definition for ADC_CCR register ********************/
+#define ADC12_CCR_MULTI ((uint32_t)0x0000001F) /*!< Multi ADC mode selection */
+#define ADC12_CCR_MULTI_0 ((uint32_t)0x00000001) /*!< MULTI bit 0 */
+#define ADC12_CCR_MULTI_1 ((uint32_t)0x00000002) /*!< MULTI bit 1 */
+#define ADC12_CCR_MULTI_2 ((uint32_t)0x00000004) /*!< MULTI bit 2 */
+#define ADC12_CCR_MULTI_3 ((uint32_t)0x00000008) /*!< MULTI bit 3 */
+#define ADC12_CCR_MULTI_4 ((uint32_t)0x00000010) /*!< MULTI bit 4 */
+#define ADC12_CCR_DELAY ((uint32_t)0x00000F00) /*!< Delay between 2 sampling phases */
+#define ADC12_CCR_DELAY_0 ((uint32_t)0x00000100) /*!< DELAY bit 0 */
+#define ADC12_CCR_DELAY_1 ((uint32_t)0x00000200) /*!< DELAY bit 1 */
+#define ADC12_CCR_DELAY_2 ((uint32_t)0x00000400) /*!< DELAY bit 2 */
+#define ADC12_CCR_DELAY_3 ((uint32_t)0x00000800) /*!< DELAY bit 3 */
+#define ADC12_CCR_DMACFG ((uint32_t)0x00002000) /*!< DMA configuration for multi-ADC mode */
+#define ADC12_CCR_MDMA ((uint32_t)0x0000C000) /*!< DMA mode for multi-ADC mode */
+#define ADC12_CCR_MDMA_0 ((uint32_t)0x00004000) /*!< MDMA bit 0 */
+#define ADC12_CCR_MDMA_1 ((uint32_t)0x00008000) /*!< MDMA bit 1 */
+#define ADC12_CCR_CKMODE ((uint32_t)0x00030000) /*!< ADC clock mode */
+#define ADC12_CCR_CKMODE_0 ((uint32_t)0x00010000) /*!< CKMODE bit 0 */
+#define ADC12_CCR_CKMODE_1 ((uint32_t)0x00020000) /*!< CKMODE bit 1 */
+#define ADC12_CCR_VREFEN ((uint32_t)0x00400000) /*!< VREFINT enable */
+#define ADC12_CCR_TSEN ((uint32_t)0x00800000) /*!< Temperature sensor enable */
+#define ADC12_CCR_VBATEN ((uint32_t)0x01000000) /*!< VBAT enable */
+
+/******************** Bit definition for ADC_CCR register ********************/
+#define ADC34_CCR_MULTI ((uint32_t)0x0000001F) /*!< Multi ADC mode selection */
+#define ADC34_CCR_MULTI_0 ((uint32_t)0x00000001) /*!< MULTI bit 0 */
+#define ADC34_CCR_MULTI_1 ((uint32_t)0x00000002) /*!< MULTI bit 1 */
+#define ADC34_CCR_MULTI_2 ((uint32_t)0x00000004) /*!< MULTI bit 2 */
+#define ADC34_CCR_MULTI_3 ((uint32_t)0x00000008) /*!< MULTI bit 3 */
+#define ADC34_CCR_MULTI_4 ((uint32_t)0x00000010) /*!< MULTI bit 4 */
+
+#define ADC34_CCR_DELAY ((uint32_t)0x00000F00) /*!< Delay between 2 sampling phases */
+#define ADC34_CCR_DELAY_0 ((uint32_t)0x00000100) /*!< DELAY bit 0 */
+#define ADC34_CCR_DELAY_1 ((uint32_t)0x00000200) /*!< DELAY bit 1 */
+#define ADC34_CCR_DELAY_2 ((uint32_t)0x00000400) /*!< DELAY bit 2 */
+#define ADC34_CCR_DELAY_3 ((uint32_t)0x00000800) /*!< DELAY bit 3 */
+
+#define ADC34_CCR_DMACFG ((uint32_t)0x00002000) /*!< DMA configuration for multi-ADC mode */
+#define ADC34_CCR_MDMA ((uint32_t)0x0000C000) /*!< DMA mode for multi-ADC mode */
+#define ADC34_CCR_MDMA_0 ((uint32_t)0x00004000) /*!< MDMA bit 0 */
+#define ADC34_CCR_MDMA_1 ((uint32_t)0x00008000) /*!< MDMA bit 1 */
+
+#define ADC34_CCR_CKMODE ((uint32_t)0x00030000) /*!< ADC clock mode */
+#define ADC34_CCR_CKMODE_0 ((uint32_t)0x00010000) /*!< CKMODE bit 0 */
+#define ADC34_CCR_CKMODE_1 ((uint32_t)0x00020000) /*!< CKMODE bit 1 */
+
+#define ADC34_CCR_VREFEN ((uint32_t)0x00400000) /*!< VREFINT enable */
+#define ADC34_CCR_TSEN ((uint32_t)0x00800000) /*!< Temperature sensor enable */
+#define ADC34_CCR_VBATEN ((uint32_t)0x01000000) /*!< VBAT enable */
+
+/******************** Bit definition for ADC_CDR register ********************/
+#define ADC12_CDR_RDATA_MST ((uint32_t)0x0000FFFF) /*!< Regular Data of the master ADC */
+#define ADC12_CDR_RDATA_MST_0 ((uint32_t)0x00000001) /*!< RDATA_MST bit 0 */
+#define ADC12_CDR_RDATA_MST_1 ((uint32_t)0x00000002) /*!< RDATA_MST bit 1 */
+#define ADC12_CDR_RDATA_MST_2 ((uint32_t)0x00000004) /*!< RDATA_MST bit 2 */
+#define ADC12_CDR_RDATA_MST_3 ((uint32_t)0x00000008) /*!< RDATA_MST bit 3 */
+#define ADC12_CDR_RDATA_MST_4 ((uint32_t)0x00000010) /*!< RDATA_MST bit 4 */
+#define ADC12_CDR_RDATA_MST_5 ((uint32_t)0x00000020) /*!< RDATA_MST bit 5 */
+#define ADC12_CDR_RDATA_MST_6 ((uint32_t)0x00000040) /*!< RDATA_MST bit 6 */
+#define ADC12_CDR_RDATA_MST_7 ((uint32_t)0x00000080) /*!< RDATA_MST bit 7 */
+#define ADC12_CDR_RDATA_MST_8 ((uint32_t)0x00000100) /*!< RDATA_MST bit 8 */
+#define ADC12_CDR_RDATA_MST_9 ((uint32_t)0x00000200) /*!< RDATA_MST bit 9 */
+#define ADC12_CDR_RDATA_MST_10 ((uint32_t)0x00000400) /*!< RDATA_MST bit 10 */
+#define ADC12_CDR_RDATA_MST_11 ((uint32_t)0x00000800) /*!< RDATA_MST bit 11 */
+#define ADC12_CDR_RDATA_MST_12 ((uint32_t)0x00001000) /*!< RDATA_MST bit 12 */
+#define ADC12_CDR_RDATA_MST_13 ((uint32_t)0x00002000) /*!< RDATA_MST bit 13 */
+#define ADC12_CDR_RDATA_MST_14 ((uint32_t)0x00004000) /*!< RDATA_MST bit 14 */
+#define ADC12_CDR_RDATA_MST_15 ((uint32_t)0x00008000) /*!< RDATA_MST bit 15 */
+
+#define ADC12_CDR_RDATA_SLV ((uint32_t)0xFFFF0000) /*!< Regular Data of the master ADC */
+#define ADC12_CDR_RDATA_SLV_0 ((uint32_t)0x00010000) /*!< RDATA_SLV bit 0 */
+#define ADC12_CDR_RDATA_SLV_1 ((uint32_t)0x00020000) /*!< RDATA_SLV bit 1 */
+#define ADC12_CDR_RDATA_SLV_2 ((uint32_t)0x00040000) /*!< RDATA_SLV bit 2 */
+#define ADC12_CDR_RDATA_SLV_3 ((uint32_t)0x00080000) /*!< RDATA_SLV bit 3 */
+#define ADC12_CDR_RDATA_SLV_4 ((uint32_t)0x00100000) /*!< RDATA_SLV bit 4 */
+#define ADC12_CDR_RDATA_SLV_5 ((uint32_t)0x00200000) /*!< RDATA_SLV bit 5 */
+#define ADC12_CDR_RDATA_SLV_6 ((uint32_t)0x00400000) /*!< RDATA_SLV bit 6 */
+#define ADC12_CDR_RDATA_SLV_7 ((uint32_t)0x00800000) /*!< RDATA_SLV bit 7 */
+#define ADC12_CDR_RDATA_SLV_8 ((uint32_t)0x01000000) /*!< RDATA_SLV bit 8 */
+#define ADC12_CDR_RDATA_SLV_9 ((uint32_t)0x02000000) /*!< RDATA_SLV bit 9 */
+#define ADC12_CDR_RDATA_SLV_10 ((uint32_t)0x04000000) /*!< RDATA_SLV bit 10 */
+#define ADC12_CDR_RDATA_SLV_11 ((uint32_t)0x08000000) /*!< RDATA_SLV bit 11 */
+#define ADC12_CDR_RDATA_SLV_12 ((uint32_t)0x10000000) /*!< RDATA_SLV bit 12 */
+#define ADC12_CDR_RDATA_SLV_13 ((uint32_t)0x20000000) /*!< RDATA_SLV bit 13 */
+#define ADC12_CDR_RDATA_SLV_14 ((uint32_t)0x40000000) /*!< RDATA_SLV bit 14 */
+#define ADC12_CDR_RDATA_SLV_15 ((uint32_t)0x80000000) /*!< RDATA_SLV bit 15 */
+
+/******************** Bit definition for ADC_CDR register ********************/
+#define ADC34_CDR_RDATA_MST ((uint32_t)0x0000FFFF) /*!< Regular Data of the master ADC */
+#define ADC34_CDR_RDATA_MST_0 ((uint32_t)0x00000001) /*!< RDATA_MST bit 0 */
+#define ADC34_CDR_RDATA_MST_1 ((uint32_t)0x00000002) /*!< RDATA_MST bit 1 */
+#define ADC34_CDR_RDATA_MST_2 ((uint32_t)0x00000004) /*!< RDATA_MST bit 2 */
+#define ADC34_CDR_RDATA_MST_3 ((uint32_t)0x00000008) /*!< RDATA_MST bit 3 */
+#define ADC34_CDR_RDATA_MST_4 ((uint32_t)0x00000010) /*!< RDATA_MST bit 4 */
+#define ADC34_CDR_RDATA_MST_5 ((uint32_t)0x00000020) /*!< RDATA_MST bit 5 */
+#define ADC34_CDR_RDATA_MST_6 ((uint32_t)0x00000040) /*!< RDATA_MST bit 6 */
+#define ADC34_CDR_RDATA_MST_7 ((uint32_t)0x00000080) /*!< RDATA_MST bit 7 */
+#define ADC34_CDR_RDATA_MST_8 ((uint32_t)0x00000100) /*!< RDATA_MST bit 8 */
+#define ADC34_CDR_RDATA_MST_9 ((uint32_t)0x00000200) /*!< RDATA_MST bit 9 */
+#define ADC34_CDR_RDATA_MST_10 ((uint32_t)0x00000400) /*!< RDATA_MST bit 10 */
+#define ADC34_CDR_RDATA_MST_11 ((uint32_t)0x00000800) /*!< RDATA_MST bit 11 */
+#define ADC34_CDR_RDATA_MST_12 ((uint32_t)0x00001000) /*!< RDATA_MST bit 12 */
+#define ADC34_CDR_RDATA_MST_13 ((uint32_t)0x00002000) /*!< RDATA_MST bit 13 */
+#define ADC34_CDR_RDATA_MST_14 ((uint32_t)0x00004000) /*!< RDATA_MST bit 14 */
+#define ADC34_CDR_RDATA_MST_15 ((uint32_t)0x00008000) /*!< RDATA_MST bit 15 */
+
+#define ADC34_CDR_RDATA_SLV ((uint32_t)0xFFFF0000) /*!< Regular Data of the master ADC */
+#define ADC34_CDR_RDATA_SLV_0 ((uint32_t)0x00010000) /*!< RDATA_SLV bit 0 */
+#define ADC34_CDR_RDATA_SLV_1 ((uint32_t)0x00020000) /*!< RDATA_SLV bit 1 */
+#define ADC34_CDR_RDATA_SLV_2 ((uint32_t)0x00040000) /*!< RDATA_SLV bit 2 */
+#define ADC34_CDR_RDATA_SLV_3 ((uint32_t)0x00080000) /*!< RDATA_SLV bit 3 */
+#define ADC34_CDR_RDATA_SLV_4 ((uint32_t)0x00100000) /*!< RDATA_SLV bit 4 */
+#define ADC34_CDR_RDATA_SLV_5 ((uint32_t)0x00200000) /*!< RDATA_SLV bit 5 */
+#define ADC34_CDR_RDATA_SLV_6 ((uint32_t)0x00400000) /*!< RDATA_SLV bit 6 */
+#define ADC34_CDR_RDATA_SLV_7 ((uint32_t)0x00800000) /*!< RDATA_SLV bit 7 */
+#define ADC34_CDR_RDATA_SLV_8 ((uint32_t)0x01000000) /*!< RDATA_SLV bit 8 */
+#define ADC34_CDR_RDATA_SLV_9 ((uint32_t)0x02000000) /*!< RDATA_SLV bit 9 */
+#define ADC34_CDR_RDATA_SLV_10 ((uint32_t)0x04000000) /*!< RDATA_SLV bit 10 */
+#define ADC34_CDR_RDATA_SLV_11 ((uint32_t)0x08000000) /*!< RDATA_SLV bit 11 */
+#define ADC34_CDR_RDATA_SLV_12 ((uint32_t)0x10000000) /*!< RDATA_SLV bit 12 */
+#define ADC34_CDR_RDATA_SLV_13 ((uint32_t)0x20000000) /*!< RDATA_SLV bit 13 */
+#define ADC34_CDR_RDATA_SLV_14 ((uint32_t)0x40000000) /*!< RDATA_SLV bit 14 */
+#define ADC34_CDR_RDATA_SLV_15 ((uint32_t)0x80000000) /*!< RDATA_SLV bit 15 */
+
+/******************************************************************************/
+/* */
+/* Analog Comparators (COMP) */
+/* */
+/******************************************************************************/
+/********************** Bit definition for COMP1_CSR register ***************/
+#define COMP1_CSR_COMP1EN ((uint32_t)0x00000001) /*!< COMP1 enable */
+#define COMP1_CSR_COMP1SW1 ((uint32_t)0x00000002) /*!< COMP1 SW1 switch control */
+#define COMP1_CSR_COMP1MODE ((uint32_t)0x0000000C) /*!< COMP1 power mode */
+#define COMP1_CSR_COMP1MODE_0 ((uint32_t)0x00000004) /*!< COMP1 power mode bit 0 */
+#define COMP1_CSR_COMP1MODE_1 ((uint32_t)0x00000008) /*!< COMP1 power mode bit 1 */
+#define COMP1_CSR_COMP1INSEL ((uint32_t)0x00000070) /*!< COMP1 inverting input select */
+#define COMP1_CSR_COMP1INSEL_0 ((uint32_t)0x00000010) /*!< COMP1 inverting input select bit 0 */
+#define COMP1_CSR_COMP1INSEL_1 ((uint32_t)0x00000020) /*!< COMP1 inverting input select bit 1 */
+#define COMP1_CSR_COMP1INSEL_2 ((uint32_t)0x00000040) /*!< COMP1 inverting input select bit 2 */
+#define COMP1_CSR_COMP1NONINSEL ((uint32_t)0x00000080) /*!< COMP1 non inverting input select */
+#define COMP1_CSR_COMP1OUTSEL ((uint32_t)0x00003C00) /*!< COMP1 output select */
+#define COMP1_CSR_COMP1OUTSEL_0 ((uint32_t)0x00000400) /*!< COMP1 output select bit 0 */
+#define COMP1_CSR_COMP1OUTSEL_1 ((uint32_t)0x00000800) /*!< COMP1 output select bit 1 */
+#define COMP1_CSR_COMP1OUTSEL_2 ((uint32_t)0x00001000) /*!< COMP1 output select bit 2 */
+#define COMP1_CSR_COMP1OUTSEL_3 ((uint32_t)0x00002000) /*!< COMP1 output select bit 3 */
+#define COMP1_CSR_COMP1POL ((uint32_t)0x00008000) /*!< COMP1 output polarity */
+#define COMP1_CSR_COMP1HYST ((uint32_t)0x00030000) /*!< COMP1 hysteresis */
+#define COMP1_CSR_COMP1HYST_0 ((uint32_t)0x00010000) /*!< COMP1 hysteresis bit 0 */
+#define COMP1_CSR_COMP1HYST_1 ((uint32_t)0x00020000) /*!< COMP1 hysteresis bit 1 */
+#define COMP1_CSR_COMP1BLANKING ((uint32_t)0x000C0000) /*!< COMP1 blanking */
+#define COMP1_CSR_COMP1BLANKING_0 ((uint32_t)0x00040000) /*!< COMP1 blanking bit 0 */
+#define COMP1_CSR_COMP1BLANKING_1 ((uint32_t)0x00080000) /*!< COMP1 blanking bit 1 */
+#define COMP1_CSR_COMP1BLANKING_2 ((uint32_t)0x00100000) /*!< COMP1 blanking bit 2 */
+#define COMP1_CSR_COMP1OUT ((uint32_t)0x40000000) /*!< COMP1 output level */
+#define COMP1_CSR_COMP1LOCK ((uint32_t)0x80000000) /*!< COMP1 lock */
+
+/********************** Bit definition for COMP2_CSR register ***************/
+#define COMP2_CSR_COMP2EN ((uint32_t)0x00000001) /*!< COMP2 enable */
+#define COMP2_CSR_COMP2MODE ((uint32_t)0x0000000C) /*!< COMP2 power mode */
+#define COMP2_CSR_COMP2MODE_0 ((uint32_t)0x00000004) /*!< COMP2 power mode bit 0 */
+#define COMP2_CSR_COMP2MODE_1 ((uint32_t)0x00000008) /*!< COMP2 power mode bit 1 */
+#define COMP2_CSR_COMP2INSEL ((uint32_t)0x00000070) /*!< COMP2 inverting input select */
+#define COMP2_CSR_COMP2INSEL_0 ((uint32_t)0x00000010) /*!< COMP2 inverting input select bit 0 */
+#define COMP2_CSR_COMP2INSEL_1 ((uint32_t)0x00000020) /*!< COMP2 inverting input select bit 1 */
+#define COMP2_CSR_COMP2INSEL_2 ((uint32_t)0x00000040) /*!< COMP2 inverting input select bit 2 */
+#define COMP2_CSR_COMP2NONINSEL ((uint32_t)0x00000080) /*!< COMP2 non inverting input select */
+#define COMP2_CSR_COMP2WNDWEN ((uint32_t)0x00000200) /*!< COMP2 window mode enable */
+#define COMP2_CSR_COMP2OUTSEL ((uint32_t)0x00003C00) /*!< COMP2 output select */
+#define COMP2_CSR_COMP2OUTSEL_0 ((uint32_t)0x00000400) /*!< COMP2 output select bit 0 */
+#define COMP2_CSR_COMP2OUTSEL_1 ((uint32_t)0x00000800) /*!< COMP2 output select bit 1 */
+#define COMP2_CSR_COMP2OUTSEL_2 ((uint32_t)0x00001000) /*!< COMP2 output select bit 2 */
+#define COMP2_CSR_COMP2OUTSEL_3 ((uint32_t)0x00002000) /*!< COMP2 output select bit 3 */
+#define COMP2_CSR_COMP2POL ((uint32_t)0x00008000) /*!< COMP2 output polarity */
+#define COMP2_CSR_COMP2HYST ((uint32_t)0x00030000) /*!< COMP2 hysteresis */
+#define COMP2_CSR_COMP2HYST_0 ((uint32_t)0x00010000) /*!< COMP2 hysteresis bit 0 */
+#define COMP2_CSR_COMP2HYST_1 ((uint32_t)0x00020000) /*!< COMP2 hysteresis bit 1 */
+#define COMP2_CSR_COMP2BLANKING ((uint32_t)0x000C0000) /*!< COMP2 blanking */
+#define COMP2_CSR_COMP2BLANKING_0 ((uint32_t)0x00040000) /*!< COMP2 blanking bit 0 */
+#define COMP2_CSR_COMP2BLANKING_1 ((uint32_t)0x00080000) /*!< COMP2 blanking bit 1 */
+#define COMP2_CSR_COMP2BLANKING_2 ((uint32_t)0x00100000) /*!< COMP2 blanking bit 2 */
+#define COMP2_CSR_COMP2OUT ((uint32_t)0x40000000) /*!< COMP2 output level */
+#define COMP2_CSR_COMP2LOCK ((uint32_t)0x80000000) /*!< COMP2 lock */
+
+/********************** Bit definition for COMP3_CSR register ***************/
+#define COMP3_CSR_COMP3EN ((uint32_t)0x00000001) /*!< COMP3 enable */
+#define COMP3_CSR_COMP3MODE ((uint32_t)0x0000000C) /*!< COMP3 power mode */
+#define COMP3_CSR_COMP3MODE_0 ((uint32_t)0x00000004) /*!< COMP3 power mode bit 0 */
+#define COMP3_CSR_COMP3MODE_1 ((uint32_t)0x00000008) /*!< COMP3 power mode bit 1 */
+#define COMP3_CSR_COMP3INSEL ((uint32_t)0x00000070) /*!< COMP3 inverting input select */
+#define COMP3_CSR_COMP3INSEL_0 ((uint32_t)0x00000010) /*!< COMP3 inverting input select bit 0 */
+#define COMP3_CSR_COMP3INSEL_1 ((uint32_t)0x00000020) /*!< COMP3 inverting input select bit 1 */
+#define COMP3_CSR_COMP3INSEL_2 ((uint32_t)0x00000040) /*!< COMP3 inverting input select bit 2 */
+#define COMP3_CSR_COMP3NONINSEL ((uint32_t)0x00000080) /*!< COMP3 non inverting input select */
+#define COMP3_CSR_COMP3OUTSEL ((uint32_t)0x00003C00) /*!< COMP3 output select */
+#define COMP3_CSR_COMP3OUTSEL_0 ((uint32_t)0x00000400) /*!< COMP3 output select bit 0 */
+#define COMP3_CSR_COMP3OUTSEL_1 ((uint32_t)0x00000800) /*!< COMP3 output select bit 1 */
+#define COMP3_CSR_COMP3OUTSEL_2 ((uint32_t)0x00001000) /*!< COMP3 output select bit 2 */
+#define COMP3_CSR_COMP3OUTSEL_3 ((uint32_t)0x00002000) /*!< COMP3 output select bit 3 */
+#define COMP3_CSR_COMP3POL ((uint32_t)0x00008000) /*!< COMP3 output polarity */
+#define COMP3_CSR_COMP3HYST ((uint32_t)0x00030000) /*!< COMP3 hysteresis */
+#define COMP3_CSR_COMP3HYST_0 ((uint32_t)0x00010000) /*!< COMP3 hysteresis bit 0 */
+#define COMP3_CSR_COMP3HYST_1 ((uint32_t)0x00020000) /*!< COMP3 hysteresis bit 1 */
+#define COMP3_CSR_COMP3BLANKING ((uint32_t)0x000C0000) /*!< COMP3 blanking */
+#define COMP3_CSR_COMP3BLANKING_0 ((uint32_t)0x00040000) /*!< COMP3 blanking bit 0 */
+#define COMP3_CSR_COMP3BLANKING_1 ((uint32_t)0x00080000) /*!< COMP3 blanking bit 1 */
+#define COMP3_CSR_COMP3BLANKING_2 ((uint32_t)0x00100000) /*!< COMP3 blanking bit 2 */
+#define COMP3_CSR_COMP3OUT ((uint32_t)0x40000000) /*!< COMP3 output level */
+#define COMP3_CSR_COMP3LOCK ((uint32_t)0x80000000) /*!< COMP3 lock */
+
+/********************** Bit definition for COMP4_CSR register ***************/
+#define COMP4_CSR_COMP4EN ((uint32_t)0x00000001) /*!< COMP4 enable */
+#define COMP4_CSR_COMP4MODE ((uint32_t)0x0000000C) /*!< COMP4 power mode */
+#define COMP4_CSR_COMP4MODE_0 ((uint32_t)0x00000004) /*!< COMP4 power mode bit 0 */
+#define COMP4_CSR_COMP4MODE_1 ((uint32_t)0x00000008) /*!< COMP4 power mode bit 1 */
+#define COMP4_CSR_COMP4INSEL ((uint32_t)0x00000070) /*!< COMP4 inverting input select */
+#define COMP4_CSR_COMP4INSEL_0 ((uint32_t)0x00000010) /*!< COMP4 inverting input select bit 0 */
+#define COMP4_CSR_COMP4INSEL_1 ((uint32_t)0x00000020) /*!< COMP4 inverting input select bit 1 */
+#define COMP4_CSR_COMP4INSEL_2 ((uint32_t)0x00000040) /*!< COMP4 inverting input select bit 2 */
+#define COMP4_CSR_COMP4NONINSEL ((uint32_t)0x00000080) /*!< COMP4 non inverting input select */
+#define COMP4_CSR_COMP4WNDWEN ((uint32_t)0x00000200) /*!< COMP4 window mode enable */
+#define COMP4_CSR_COMP4OUTSEL ((uint32_t)0x00003C00) /*!< COMP4 output select */
+#define COMP4_CSR_COMP4OUTSEL_0 ((uint32_t)0x00000400) /*!< COMP4 output select bit 0 */
+#define COMP4_CSR_COMP4OUTSEL_1 ((uint32_t)0x00000800) /*!< COMP4 output select bit 1 */
+#define COMP4_CSR_COMP4OUTSEL_2 ((uint32_t)0x00001000) /*!< COMP4 output select bit 2 */
+#define COMP4_CSR_COMP4OUTSEL_3 ((uint32_t)0x00002000) /*!< COMP4 output select bit 3 */
+#define COMP4_CSR_COMP4POL ((uint32_t)0x00008000) /*!< COMP4 output polarity */
+#define COMP4_CSR_COMP4HYST ((uint32_t)0x00030000) /*!< COMP4 hysteresis */
+#define COMP4_CSR_COMP4HYST_0 ((uint32_t)0x00010000) /*!< COMP4 hysteresis bit 0 */
+#define COMP4_CSR_COMP4HYST_1 ((uint32_t)0x00020000) /*!< COMP4 hysteresis bit 1 */
+#define COMP4_CSR_COMP4BLANKING ((uint32_t)0x000C0000) /*!< COMP4 blanking */
+#define COMP4_CSR_COMP4BLANKING_0 ((uint32_t)0x00040000) /*!< COMP4 blanking bit 0 */
+#define COMP4_CSR_COMP4BLANKING_1 ((uint32_t)0x00080000) /*!< COMP4 blanking bit 1 */
+#define COMP4_CSR_COMP4BLANKING_2 ((uint32_t)0x00100000) /*!< COMP4 blanking bit 2 */
+#define COMP4_CSR_COMP4OUT ((uint32_t)0x40000000) /*!< COMP4 output level */
+#define COMP4_CSR_COMP4LOCK ((uint32_t)0x80000000) /*!< COMP4 lock */
+
+/********************** Bit definition for COMP5_CSR register ***************/
+#define COMP5_CSR_COMP5EN ((uint32_t)0x00000001) /*!< COMP5 enable */
+#define COMP5_CSR_COMP5MODE ((uint32_t)0x0000000C) /*!< COMP5 power mode */
+#define COMP5_CSR_COMP5MODE_0 ((uint32_t)0x00000004) /*!< COMP5 power mode bit 0 */
+#define COMP5_CSR_COMP5MODE_1 ((uint32_t)0x00000008) /*!< COMP5 power mode bit 1 */
+#define COMP5_CSR_COMP5INSEL ((uint32_t)0x00000070) /*!< COMP5 inverting input select */
+#define COMP5_CSR_COMP5INSEL_0 ((uint32_t)0x00000010) /*!< COMP5 inverting input select bit 0 */
+#define COMP5_CSR_COMP5INSEL_1 ((uint32_t)0x00000020) /*!< COMP5 inverting input select bit 1 */
+#define COMP5_CSR_COMP5INSEL_2 ((uint32_t)0x00000040) /*!< COMP5 inverting input select bit 2 */
+#define COMP5_CSR_COMP5NONINSEL ((uint32_t)0x00000080) /*!< COMP5 non inverting input select */
+#define COMP5_CSR_COMP5OUTSEL ((uint32_t)0x00003C00) /*!< COMP5 output select */
+#define COMP5_CSR_COMP5OUTSEL_0 ((uint32_t)0x00000400) /*!< COMP5 output select bit 0 */
+#define COMP5_CSR_COMP5OUTSEL_1 ((uint32_t)0x00000800) /*!< COMP5 output select bit 1 */
+#define COMP5_CSR_COMP5OUTSEL_2 ((uint32_t)0x00001000) /*!< COMP5 output select bit 2 */
+#define COMP5_CSR_COMP5OUTSEL_3 ((uint32_t)0x00002000) /*!< COMP5 output select bit 3 */
+#define COMP5_CSR_COMP5POL ((uint32_t)0x00008000) /*!< COMP5 output polarity */
+#define COMP5_CSR_COMP5HYST ((uint32_t)0x00030000) /*!< COMP5 hysteresis */
+#define COMP5_CSR_COMP5HYST_0 ((uint32_t)0x00010000) /*!< COMP5 hysteresis bit 0 */
+#define COMP5_CSR_COMP5HYST_1 ((uint32_t)0x00020000) /*!< COMP5 hysteresis bit 1 */
+#define COMP5_CSR_COMP5BLANKING ((uint32_t)0x000C0000) /*!< COMP5 blanking */
+#define COMP5_CSR_COMP5BLANKING_0 ((uint32_t)0x00040000) /*!< COMP5 blanking bit 0 */
+#define COMP5_CSR_COMP5BLANKING_1 ((uint32_t)0x00080000) /*!< COMP5 blanking bit 1 */
+#define COMP5_CSR_COMP5BLANKING_2 ((uint32_t)0x00100000) /*!< COMP5 blanking bit 2 */
+#define COMP5_CSR_COMP5OUT ((uint32_t)0x40000000) /*!< COMP5 output level */
+#define COMP5_CSR_COMP5LOCK ((uint32_t)0x80000000) /*!< COMP5 lock */
+
+/********************** Bit definition for COMP6_CSR register ***************/
+#define COMP6_CSR_COMP6EN ((uint32_t)0x00000001) /*!< COMP6 enable */
+#define COMP6_CSR_COMP6MODE ((uint32_t)0x0000000C) /*!< COMP6 power mode */
+#define COMP6_CSR_COMP6MODE_0 ((uint32_t)0x00000004) /*!< COMP6 power mode bit 0 */
+#define COMP6_CSR_COMP6MODE_1 ((uint32_t)0x00000008) /*!< COMP6 power mode bit 1 */
+#define COMP6_CSR_COMP6INSEL ((uint32_t)0x00000070) /*!< COMP6 inverting input select */
+#define COMP6_CSR_COMP6INSEL_0 ((uint32_t)0x00000010) /*!< COMP6 inverting input select bit 0 */
+#define COMP6_CSR_COMP6INSEL_1 ((uint32_t)0x00000020) /*!< COMP6 inverting input select bit 1 */
+#define COMP6_CSR_COMP6INSEL_2 ((uint32_t)0x00000040) /*!< COMP6 inverting input select bit 2 */
+#define COMP6_CSR_COMP6NONINSEL ((uint32_t)0x00000080) /*!< COMP6 non inverting input select */
+#define COMP6_CSR_COMP6WNDWEN ((uint32_t)0x00000200) /*!< COMP6 window mode enable */
+#define COMP6_CSR_COMP6OUTSEL ((uint32_t)0x00003C00) /*!< COMP6 output select */
+#define COMP6_CSR_COMP6OUTSEL_0 ((uint32_t)0x00000400) /*!< COMP6 output select bit 0 */
+#define COMP6_CSR_COMP6OUTSEL_1 ((uint32_t)0x00000800) /*!< COMP6 output select bit 1 */
+#define COMP6_CSR_COMP6OUTSEL_2 ((uint32_t)0x00001000) /*!< COMP6 output select bit 2 */
+#define COMP6_CSR_COMP6OUTSEL_3 ((uint32_t)0x00002000) /*!< COMP6 output select bit 3 */
+#define COMP6_CSR_COMP6POL ((uint32_t)0x00008000) /*!< COMP6 output polarity */
+#define COMP6_CSR_COMP6HYST ((uint32_t)0x00030000) /*!< COMP6 hysteresis */
+#define COMP6_CSR_COMP6HYST_0 ((uint32_t)0x00010000) /*!< COMP6 hysteresis bit 0 */
+#define COMP6_CSR_COMP6HYST_1 ((uint32_t)0x00020000) /*!< COMP6 hysteresis bit 1 */
+#define COMP6_CSR_COMP6BLANKING ((uint32_t)0x000C0000) /*!< COMP6 blanking */
+#define COMP6_CSR_COMP6BLANKING_0 ((uint32_t)0x00040000) /*!< COMP6 blanking bit 0 */
+#define COMP6_CSR_COMP6BLANKING_1 ((uint32_t)0x00080000) /*!< COMP6 blanking bit 1 */
+#define COMP6_CSR_COMP6BLANKING_2 ((uint32_t)0x00100000) /*!< COMP6 blanking bit 2 */
+#define COMP6_CSR_COMP6OUT ((uint32_t)0x40000000) /*!< COMP6 output level */
+#define COMP6_CSR_COMP6LOCK ((uint32_t)0x80000000) /*!< COMP6 lock */
+
+/********************** Bit definition for COMP7_CSR register ***************/
+#define COMP7_CSR_COMP7EN ((uint32_t)0x00000001) /*!< COMP7 enable */
+#define COMP7_CSR_COMP7MODE ((uint32_t)0x0000000C) /*!< COMP7 power mode */
+#define COMP7_CSR_COMP7MODE_0 ((uint32_t)0x00000004) /*!< COMP7 power mode bit 0 */
+#define COMP7_CSR_COMP7MODE_1 ((uint32_t)0x00000008) /*!< COMP7 power mode bit 1 */
+#define COMP7_CSR_COMP7INSEL ((uint32_t)0x00000070) /*!< COMP7 inverting input select */
+#define COMP7_CSR_COMP7INSEL_0 ((uint32_t)0x00000010) /*!< COMP7 inverting input select bit 0 */
+#define COMP7_CSR_COMP7INSEL_1 ((uint32_t)0x00000020) /*!< COMP7 inverting input select bit 1 */
+#define COMP7_CSR_COMP7INSEL_2 ((uint32_t)0x00000040) /*!< COMP7 inverting input select bit 2 */
+#define COMP7_CSR_COMP7NONINSEL ((uint32_t)0x00000080) /*!< COMP7 non inverting input select */
+#define COMP7_CSR_COMP7OUTSEL ((uint32_t)0x00003C00) /*!< COMP7 output select */
+#define COMP7_CSR_COMP7OUTSEL_0 ((uint32_t)0x00000400) /*!< COMP7 output select bit 0 */
+#define COMP7_CSR_COMP7OUTSEL_1 ((uint32_t)0x00000800) /*!< COMP7 output select bit 1 */
+#define COMP7_CSR_COMP7OUTSEL_2 ((uint32_t)0x00001000) /*!< COMP7 output select bit 2 */
+#define COMP7_CSR_COMP7OUTSEL_3 ((uint32_t)0x00002000) /*!< COMP7 output select bit 3 */
+#define COMP7_CSR_COMP7POL ((uint32_t)0x00008000) /*!< COMP7 output polarity */
+#define COMP7_CSR_COMP7HYST ((uint32_t)0x00030000) /*!< COMP7 hysteresis */
+#define COMP7_CSR_COMP7HYST_0 ((uint32_t)0x00010000) /*!< COMP7 hysteresis bit 0 */
+#define COMP7_CSR_COMP7HYST_1 ((uint32_t)0x00020000) /*!< COMP7 hysteresis bit 1 */
+#define COMP7_CSR_COMP7BLANKING ((uint32_t)0x000C0000) /*!< COMP7 blanking */
+#define COMP7_CSR_COMP7BLANKING_0 ((uint32_t)0x00040000) /*!< COMP7 blanking bit 0 */
+#define COMP7_CSR_COMP7BLANKING_1 ((uint32_t)0x00080000) /*!< COMP7 blanking bit 1 */
+#define COMP7_CSR_COMP7BLANKING_2 ((uint32_t)0x00100000) /*!< COMP7 blanking bit 2 */
+#define COMP7_CSR_COMP7OUT ((uint32_t)0x40000000) /*!< COMP7 output level */
+#define COMP7_CSR_COMP7LOCK ((uint32_t)0x80000000) /*!< COMP7 lock */
+
+/********************** Bit definition for COMP_CSR register ****************/
+#define COMP_CSR_COMPxEN ((uint32_t)0x00000001) /*!< COMPx enable */
+#define COMP_CSR_COMP1SW1 ((uint32_t)0x00000002) /*!< COMP1 SW1 switch control */
+#define COMP_CSR_COMPxMODE ((uint32_t)0x0000000C) /*!< COMPx power mode */
+#define COMP_CSR_COMPxMODE_0 ((uint32_t)0x00000004) /*!< COMPx power mode bit 0 */
+#define COMP_CSR_COMPxMODE_1 ((uint32_t)0x00000008) /*!< COMPx power mode bit 1 */
+#define COMP_CSR_COMPxINSEL ((uint32_t)0x00000070) /*!< COMPx inverting input select */
+#define COMP_CSR_COMPxINSEL_0 ((uint32_t)0x00000010) /*!< COMPx inverting input select bit 0 */
+#define COMP_CSR_COMPxINSEL_1 ((uint32_t)0x00000020) /*!< COMPx inverting input select bit 1 */
+#define COMP_CSR_COMPxINSEL_2 ((uint32_t)0x00000040) /*!< COMPx inverting input select bit 2 */
+#define COMP_CSR_COMPxNONINSEL ((uint32_t)0x00000080) /*!< COMPx non inverting input select */
+#define COMP_CSR_COMPxWNDWEN ((uint32_t)0x00000200) /*!< COMPx window mode enable */
+#define COMP_CSR_COMPxOUTSEL ((uint32_t)0x00003C00) /*!< COMPx output select */
+#define COMP_CSR_COMPxOUTSEL_0 ((uint32_t)0x00000400) /*!< COMPx output select bit 0 */
+#define COMP_CSR_COMPxOUTSEL_1 ((uint32_t)0x00000800) /*!< COMPx output select bit 1 */
+#define COMP_CSR_COMPxOUTSEL_2 ((uint32_t)0x00001000) /*!< COMPx output select bit 2 */
+#define COMP_CSR_COMPxOUTSEL_3 ((uint32_t)0x00002000) /*!< COMPx output select bit 3 */
+#define COMP_CSR_COMPxPOL ((uint32_t)0x00008000) /*!< COMPx output polarity */
+#define COMP_CSR_COMPxHYST ((uint32_t)0x00030000) /*!< COMPx hysteresis */
+#define COMP_CSR_COMPxHYST_0 ((uint32_t)0x00010000) /*!< COMPx hysteresis bit 0 */
+#define COMP_CSR_COMPxHYST_1 ((uint32_t)0x00020000) /*!< COMPx hysteresis bit 1 */
+#define COMP_CSR_COMPxBLANKING ((uint32_t)0x000C0000) /*!< COMPx blanking */
+#define COMP_CSR_COMPxBLANKING_0 ((uint32_t)0x00040000) /*!< COMPx blanking bit 0 */
+#define COMP_CSR_COMPxBLANKING_1 ((uint32_t)0x00080000) /*!< COMPx blanking bit 1 */
+#define COMP_CSR_COMPxBLANKING_2 ((uint32_t)0x00100000) /*!< COMPx blanking bit 2 */
+#define COMP_CSR_COMPxOUT ((uint32_t)0x40000000) /*!< COMPx output level */
+#define COMP_CSR_COMPxLOCK ((uint32_t)0x80000000) /*!< COMPx lock */
+
+/******************************************************************************/
+/* */
+/* Operational Amplifier (OPAMP) */
+/* */
+/******************************************************************************/
+/********************* Bit definition for OPAMP1_CSR register ***************/
+#define OPAMP1_CSR_OPAMP1EN ((uint32_t)0x00000001) /*!< OPAMP1 enable */
+#define OPAMP1_CSR_FORCEVP ((uint32_t)0x00000002) /*!< Connect the internal references to the plus input of the OPAMPX */
+#define OPAMP1_CSR_VPSEL ((uint32_t)0x0000000C) /*!< Non inverting input selection */
+#define OPAMP1_CSR_VPSEL_0 ((uint32_t)0x00000004) /*!< Bit 0 */
+#define OPAMP1_CSR_VPSEL_1 ((uint32_t)0x00000008) /*!< Bit 1 */
+#define OPAMP1_CSR_VMSEL ((uint32_t)0x00000060) /*!< Inverting input selection */
+#define OPAMP1_CSR_VMSEL_0 ((uint32_t)0x00000020) /*!< Bit 0 */
+#define OPAMP1_CSR_VMSEL_1 ((uint32_t)0x00000040) /*!< Bit 1 */
+#define OPAMP1_CSR_TCMEN ((uint32_t)0x00000080) /*!< Timer-Controlled Mux mode enable */
+#define OPAMP1_CSR_VMSSEL ((uint32_t)0x00000100) /*!< Inverting input secondary selection */
+#define OPAMP1_CSR_VPSSEL ((uint32_t)0x00000600) /*!< Non inverting input secondary selection */
+#define OPAMP1_CSR_VPSSEL_0 ((uint32_t)0x00000200) /*!< Bit 0 */
+#define OPAMP1_CSR_VPSSEL_1 ((uint32_t)0x00000400) /*!< Bit 1 */
+#define OPAMP1_CSR_CALON ((uint32_t)0x00000800) /*!< Calibration mode enable */
+#define OPAMP1_CSR_CALSEL ((uint32_t)0x00003000) /*!< Calibration selection */
+#define OPAMP1_CSR_CALSEL_0 ((uint32_t)0x00001000) /*!< Bit 0 */
+#define OPAMP1_CSR_CALSEL_1 ((uint32_t)0x00002000) /*!< Bit 1 */
+#define OPAMP1_CSR_PGGAIN ((uint32_t)0x0003C000) /*!< Gain in PGA mode */
+#define OPAMP1_CSR_PGGAIN_0 ((uint32_t)0x00004000) /*!< Bit 0 */
+#define OPAMP1_CSR_PGGAIN_1 ((uint32_t)0x00008000) /*!< Bit 1 */
+#define OPAMP1_CSR_PGGAIN_2 ((uint32_t)0x00010000) /*!< Bit 2 */
+#define OPAMP1_CSR_PGGAIN_3 ((uint32_t)0x00020000) /*!< Bit 3 */
+#define OPAMP1_CSR_USERTRIM ((uint32_t)0x00040000) /*!< User trimming enable */
+#define OPAMP1_CSR_TRIMOFFSETP ((uint32_t)0x00F80000) /*!< Offset trimming value (PMOS) */
+#define OPAMP1_CSR_TRIMOFFSETN ((uint32_t)0x1F000000) /*!< Offset trimming value (NMOS) */
+#define OPAMP1_CSR_TSTREF ((uint32_t)0x20000000) /*!< It enables the switch to put out the internal reference */
+#define OPAMP1_CSR_OUTCAL ((uint32_t)0x40000000) /*!< OPAMP ouput status flag */
+#define OPAMP1_CSR_LOCK ((uint32_t)0x80000000) /*!< OPAMP lock */
+
+/********************* Bit definition for OPAMP2_CSR register ***************/
+#define OPAMP2_CSR_OPAMP2EN ((uint32_t)0x00000001) /*!< OPAMP2 enable */
+#define OPAMP2_CSR_FORCEVP ((uint32_t)0x00000002) /*!< Connect the internal references to the plus input of the OPAMPX */
+#define OPAMP2_CSR_VPSEL ((uint32_t)0x0000000C) /*!< Non inverting input selection */
+#define OPAMP2_CSR_VPSEL_0 ((uint32_t)0x00000004) /*!< Bit 0 */
+#define OPAMP2_CSR_VPSEL_1 ((uint32_t)0x00000008) /*!< Bit 1 */
+#define OPAMP2_CSR_VMSEL ((uint32_t)0x00000060) /*!< Inverting input selection */
+#define OPAMP2_CSR_VMSEL_0 ((uint32_t)0x00000020) /*!< Bit 0 */
+#define OPAMP2_CSR_VMSEL_1 ((uint32_t)0x00000040) /*!< Bit 1 */
+#define OPAMP2_CSR_TCMEN ((uint32_t)0x00000080) /*!< Timer-Controlled Mux mode enable */
+#define OPAMP2_CSR_VMSSEL ((uint32_t)0x00000100) /*!< Inverting input secondary selection */
+#define OPAMP2_CSR_VPSSEL ((uint32_t)0x00000600) /*!< Non inverting input secondary selection */
+#define OPAMP2_CSR_VPSSEL_0 ((uint32_t)0x00000200) /*!< Bit 0 */
+#define OPAMP2_CSR_VPSSEL_1 ((uint32_t)0x00000400) /*!< Bit 1 */
+#define OPAMP2_CSR_CALON ((uint32_t)0x00000800) /*!< Calibration mode enable */
+#define OPAMP2_CSR_CALSEL ((uint32_t)0x00003000) /*!< Calibration selection */
+#define OPAMP2_CSR_CALSEL_0 ((uint32_t)0x00001000) /*!< Bit 0 */
+#define OPAMP2_CSR_CALSEL_1 ((uint32_t)0x00002000) /*!< Bit 1 */
+#define OPAMP2_CSR_PGGAIN ((uint32_t)0x0003C000) /*!< Gain in PGA mode */
+#define OPAMP2_CSR_PGGAIN_0 ((uint32_t)0x00004000) /*!< Bit 0 */
+#define OPAMP2_CSR_PGGAIN_1 ((uint32_t)0x00008000) /*!< Bit 1 */
+#define OPAMP2_CSR_PGGAIN_2 ((uint32_t)0x00010000) /*!< Bit 2 */
+#define OPAMP2_CSR_PGGAIN_3 ((uint32_t)0x00020000) /*!< Bit 3 */
+#define OPAMP2_CSR_USERTRIM ((uint32_t)0x00040000) /*!< User trimming enable */
+#define OPAMP2_CSR_TRIMOFFSETP ((uint32_t)0x00F80000) /*!< Offset trimming value (PMOS) */
+#define OPAMP2_CSR_TRIMOFFSETN ((uint32_t)0x1F000000) /*!< Offset trimming value (NMOS) */
+#define OPAMP2_CSR_TSTREF ((uint32_t)0x20000000) /*!< It enables the switch to put out the internal reference */
+#define OPAMP2_CSR_OUTCAL ((uint32_t)0x40000000) /*!< OPAMP ouput status flag */
+#define OPAMP2_CSR_LOCK ((uint32_t)0x80000000) /*!< OPAMP lock */
+
+/********************* Bit definition for OPAMP3_CSR register ***************/
+#define OPAMP3_CSR_OPAMP3EN ((uint32_t)0x00000001) /*!< OPAMP3 enable */
+#define OPAMP3_CSR_FORCEVP ((uint32_t)0x00000002) /*!< Connect the internal references to the plus input of the OPAMPX */
+#define OPAMP3_CSR_VPSEL ((uint32_t)0x0000000C) /*!< Non inverting input selection */
+#define OPAMP3_CSR_VPSEL_0 ((uint32_t)0x00000004) /*!< Bit 0 */
+#define OPAMP3_CSR_VPSEL_1 ((uint32_t)0x00000008) /*!< Bit 1 */
+#define OPAMP3_CSR_VMSEL ((uint32_t)0x00000060) /*!< Inverting input selection */
+#define OPAMP3_CSR_VMSEL_0 ((uint32_t)0x00000020) /*!< Bit 0 */
+#define OPAMP3_CSR_VMSEL_1 ((uint32_t)0x00000040) /*!< Bit 1 */
+#define OPAMP3_CSR_TCMEN ((uint32_t)0x00000080) /*!< Timer-Controlled Mux mode enable */
+#define OPAMP3_CSR_VMSSEL ((uint32_t)0x00000100) /*!< Inverting input secondary selection */
+#define OPAMP3_CSR_VPSSEL ((uint32_t)0x00000600) /*!< Non inverting input secondary selection */
+#define OPAMP3_CSR_VPSSEL_0 ((uint32_t)0x00000200) /*!< Bit 0 */
+#define OPAMP3_CSR_VPSSEL_1 ((uint32_t)0x00000400) /*!< Bit 1 */
+#define OPAMP3_CSR_CALON ((uint32_t)0x00000800) /*!< Calibration mode enable */
+#define OPAMP3_CSR_CALSEL ((uint32_t)0x00003000) /*!< Calibration selection */
+#define OPAMP3_CSR_CALSEL_0 ((uint32_t)0x00001000) /*!< Bit 0 */
+#define OPAMP3_CSR_CALSEL_1 ((uint32_t)0x00002000) /*!< Bit 1 */
+#define OPAMP3_CSR_PGGAIN ((uint32_t)0x0003C000) /*!< Gain in PGA mode */
+#define OPAMP3_CSR_PGGAIN_0 ((uint32_t)0x00004000) /*!< Bit 0 */
+#define OPAMP3_CSR_PGGAIN_1 ((uint32_t)0x00008000) /*!< Bit 1 */
+#define OPAMP3_CSR_PGGAIN_2 ((uint32_t)0x00010000) /*!< Bit 2 */
+#define OPAMP3_CSR_PGGAIN_3 ((uint32_t)0x00020000) /*!< Bit 3 */
+#define OPAMP3_CSR_USERTRIM ((uint32_t)0x00040000) /*!< User trimming enable */
+#define OPAMP3_CSR_TRIMOFFSETP ((uint32_t)0x00F80000) /*!< Offset trimming value (PMOS) */
+#define OPAMP3_CSR_TRIMOFFSETN ((uint32_t)0x1F000000) /*!< Offset trimming value (NMOS) */
+#define OPAMP3_CSR_TSTREF ((uint32_t)0x20000000) /*!< It enables the switch to put out the internal reference */
+#define OPAMP3_CSR_OUTCAL ((uint32_t)0x40000000) /*!< OPAMP ouput status flag */
+#define OPAMP3_CSR_LOCK ((uint32_t)0x80000000) /*!< OPAMP lock */
+
+/********************* Bit definition for OPAMP4_CSR register ***************/
+#define OPAMP4_CSR_OPAMP4EN ((uint32_t)0x00000001) /*!< OPAMP4 enable */
+#define OPAMP4_CSR_FORCEVP ((uint32_t)0x00000002) /*!< Connect the internal references to the plus input of the OPAMPX */
+#define OPAMP4_CSR_VPSEL ((uint32_t)0x0000000C) /*!< Non inverting input selection */
+#define OPAMP4_CSR_VPSEL_0 ((uint32_t)0x00000004) /*!< Bit 0 */
+#define OPAMP4_CSR_VPSEL_1 ((uint32_t)0x00000008) /*!< Bit 1 */
+#define OPAMP4_CSR_VMSEL ((uint32_t)0x00000060) /*!< Inverting input selection */
+#define OPAMP4_CSR_VMSEL_0 ((uint32_t)0x00000020) /*!< Bit 0 */
+#define OPAMP4_CSR_VMSEL_1 ((uint32_t)0x00000040) /*!< Bit 1 */
+#define OPAMP4_CSR_TCMEN ((uint32_t)0x00000080) /*!< Timer-Controlled Mux mode enable */
+#define OPAMP4_CSR_VMSSEL ((uint32_t)0x00000100) /*!< Inverting input secondary selection */
+#define OPAMP4_CSR_VPSSEL ((uint32_t)0x00000600) /*!< Non inverting input secondary selection */
+#define OPAMP4_CSR_VPSSEL_0 ((uint32_t)0x00000200) /*!< Bit 0 */
+#define OPAMP4_CSR_VPSSEL_1 ((uint32_t)0x00000400) /*!< Bit 1 */
+#define OPAMP4_CSR_CALON ((uint32_t)0x00000800) /*!< Calibration mode enable */
+#define OPAMP4_CSR_CALSEL ((uint32_t)0x00003000) /*!< Calibration selection */
+#define OPAMP4_CSR_CALSEL_0 ((uint32_t)0x00001000) /*!< Bit 0 */
+#define OPAMP4_CSR_CALSEL_1 ((uint32_t)0x00002000) /*!< Bit 1 */
+#define OPAMP4_CSR_PGGAIN ((uint32_t)0x0003C000) /*!< Gain in PGA mode */
+#define OPAMP4_CSR_PGGAIN_0 ((uint32_t)0x00004000) /*!< Bit 0 */
+#define OPAMP4_CSR_PGGAIN_1 ((uint32_t)0x00008000) /*!< Bit 1 */
+#define OPAMP4_CSR_PGGAIN_2 ((uint32_t)0x00010000) /*!< Bit 2 */
+#define OPAMP4_CSR_PGGAIN_3 ((uint32_t)0x00020000) /*!< Bit 3 */
+#define OPAMP4_CSR_USERTRIM ((uint32_t)0x00040000) /*!< User trimming enable */
+#define OPAMP4_CSR_TRIMOFFSETP ((uint32_t)0x00F80000) /*!< Offset trimming value (PMOS) */
+#define OPAMP4_CSR_TRIMOFFSETN ((uint32_t)0x1F000000) /*!< Offset trimming value (NMOS) */
+#define OPAMP4_CSR_TSTREF ((uint32_t)0x20000000) /*!< It enables the switch to put out the internal reference */
+#define OPAMP4_CSR_OUTCAL ((uint32_t)0x40000000) /*!< OPAMP ouput status flag */
+#define OPAMP4_CSR_LOCK ((uint32_t)0x80000000) /*!< OPAMP lock */
+
+/********************* Bit definition for OPAMPx_CSR register ***************/
+#define OPAMP_CSR_OPAMPxEN ((uint32_t)0x00000001) /*!< OPAMP enable */
+#define OPAMP_CSR_FORCEVP ((uint32_t)0x00000002) /*!< Connect the internal references to the plus input of the OPAMPX */
+#define OPAMP_CSR_VPSEL ((uint32_t)0x0000000C) /*!< Non inverting input selection */
+#define OPAMP_CSR_VPSEL_0 ((uint32_t)0x00000004) /*!< Bit 0 */
+#define OPAMP_CSR_VPSEL_1 ((uint32_t)0x00000008) /*!< Bit 1 */
+#define OPAMP_CSR_VMSEL ((uint32_t)0x00000060) /*!< Inverting input selection */
+#define OPAMP_CSR_VMSEL_0 ((uint32_t)0x00000020) /*!< Bit 0 */
+#define OPAMP_CSR_VMSEL_1 ((uint32_t)0x00000040) /*!< Bit 1 */
+#define OPAMP_CSR_TCMEN ((uint32_t)0x00000080) /*!< Timer-Controlled Mux mode enable */
+#define OPAMP_CSR_VMSSEL ((uint32_t)0x00000100) /*!< Inverting input secondary selection */
+#define OPAMP_CSR_VPSSEL ((uint32_t)0x00000600) /*!< Non inverting input secondary selection */
+#define OPAMP_CSR_VPSSEL_0 ((uint32_t)0x00000200) /*!< Bit 0 */
+#define OPAMP_CSR_VPSSEL_1 ((uint32_t)0x00000400) /*!< Bit 1 */
+#define OPAMP_CSR_CALON ((uint32_t)0x00000800) /*!< Calibration mode enable */
+#define OPAMP_CSR_CALSEL ((uint32_t)0x00003000) /*!< Calibration selection */
+#define OPAMP_CSR_CALSEL_0 ((uint32_t)0x00001000) /*!< Bit 0 */
+#define OPAMP_CSR_CALSEL_1 ((uint32_t)0x00002000) /*!< Bit 1 */
+#define OPAMP_CSR_PGGAIN ((uint32_t)0x0003C000) /*!< Gain in PGA mode */
+#define OPAMP_CSR_PGGAIN_0 ((uint32_t)0x00004000) /*!< Bit 0 */
+#define OPAMP_CSR_PGGAIN_1 ((uint32_t)0x00008000) /*!< Bit 1 */
+#define OPAMP_CSR_PGGAIN_2 ((uint32_t)0x00010000) /*!< Bit 2 */
+#define OPAMP_CSR_PGGAIN_3 ((uint32_t)0x00020000) /*!< Bit 3 */
+#define OPAMP_CSR_USERTRIM ((uint32_t)0x00040000) /*!< User trimming enable */
+#define OPAMP_CSR_TRIMOFFSETP ((uint32_t)0x00F80000) /*!< Offset trimming value (PMOS) */
+#define OPAMP_CSR_TRIMOFFSETN ((uint32_t)0x1F000000) /*!< Offset trimming value (NMOS) */
+#define OPAMP_CSR_TSTREF ((uint32_t)0x20000000) /*!< It enables the switch to put out the internal reference */
+#define OPAMP_CSR_OUTCAL ((uint32_t)0x40000000) /*!< OPAMP ouput status flag */
+#define OPAMP_CSR_LOCK ((uint32_t)0x80000000) /*!< OPAMP lock */
+
+
+/******************************************************************************/
+/* */
+/* Controller Area Network (CAN ) */
+/* */
+/******************************************************************************/
+/*!<CAN control and status registers */
+/******************* Bit definition for CAN_MCR register ********************/
+#define CAN_MCR_INRQ ((uint16_t)0x0001) /*!<Initialization Request */
+#define CAN_MCR_SLEEP ((uint16_t)0x0002) /*!<Sleep Mode Request */
+#define CAN_MCR_TXFP ((uint16_t)0x0004) /*!<Transmit FIFO Priority */
+#define CAN_MCR_RFLM ((uint16_t)0x0008) /*!<Receive FIFO Locked Mode */
+#define CAN_MCR_NART ((uint16_t)0x0010) /*!<No Automatic Retransmission */
+#define CAN_MCR_AWUM ((uint16_t)0x0020) /*!<Automatic Wakeup Mode */
+#define CAN_MCR_ABOM ((uint16_t)0x0040) /*!<Automatic Bus-Off Management */
+#define CAN_MCR_TTCM ((uint16_t)0x0080) /*!<Time Triggered Communication Mode */
+#define CAN_MCR_RESET ((uint16_t)0x8000) /*!<bxCAN software master reset */
+
+/******************* Bit definition for CAN_MSR register ********************/
+#define CAN_MSR_INAK ((uint16_t)0x0001) /*!<Initialization Acknowledge */
+#define CAN_MSR_SLAK ((uint16_t)0x0002) /*!<Sleep Acknowledge */
+#define CAN_MSR_ERRI ((uint16_t)0x0004) /*!<Error Interrupt */
+#define CAN_MSR_WKUI ((uint16_t)0x0008) /*!<Wakeup Interrupt */
+#define CAN_MSR_SLAKI ((uint16_t)0x0010) /*!<Sleep Acknowledge Interrupt */
+#define CAN_MSR_TXM ((uint16_t)0x0100) /*!<Transmit Mode */
+#define CAN_MSR_RXM ((uint16_t)0x0200) /*!<Receive Mode */
+#define CAN_MSR_SAMP ((uint16_t)0x0400) /*!<Last Sample Point */
+#define CAN_MSR_RX ((uint16_t)0x0800) /*!<CAN Rx Signal */
+
+/******************* Bit definition for CAN_TSR register ********************/
+#define CAN_TSR_RQCP0 ((uint32_t)0x00000001) /*!<Request Completed Mailbox0 */
+#define CAN_TSR_TXOK0 ((uint32_t)0x00000002) /*!<Transmission OK of Mailbox0 */
+#define CAN_TSR_ALST0 ((uint32_t)0x00000004) /*!<Arbitration Lost for Mailbox0 */
+#define CAN_TSR_TERR0 ((uint32_t)0x00000008) /*!<Transmission Error of Mailbox0 */
+#define CAN_TSR_ABRQ0 ((uint32_t)0x00000080) /*!<Abort Request for Mailbox0 */
+#define CAN_TSR_RQCP1 ((uint32_t)0x00000100) /*!<Request Completed Mailbox1 */
+#define CAN_TSR_TXOK1 ((uint32_t)0x00000200) /*!<Transmission OK of Mailbox1 */
+#define CAN_TSR_ALST1 ((uint32_t)0x00000400) /*!<Arbitration Lost for Mailbox1 */
+#define CAN_TSR_TERR1 ((uint32_t)0x00000800) /*!<Transmission Error of Mailbox1 */
+#define CAN_TSR_ABRQ1 ((uint32_t)0x00008000) /*!<Abort Request for Mailbox 1 */
+#define CAN_TSR_RQCP2 ((uint32_t)0x00010000) /*!<Request Completed Mailbox2 */
+#define CAN_TSR_TXOK2 ((uint32_t)0x00020000) /*!<Transmission OK of Mailbox 2 */
+#define CAN_TSR_ALST2 ((uint32_t)0x00040000) /*!<Arbitration Lost for mailbox 2 */
+#define CAN_TSR_TERR2 ((uint32_t)0x00080000) /*!<Transmission Error of Mailbox 2 */
+#define CAN_TSR_ABRQ2 ((uint32_t)0x00800000) /*!<Abort Request for Mailbox 2 */
+#define CAN_TSR_CODE ((uint32_t)0x03000000) /*!<Mailbox Code */
+
+#define CAN_TSR_TME ((uint32_t)0x1C000000) /*!<TME[2:0] bits */
+#define CAN_TSR_TME0 ((uint32_t)0x04000000) /*!<Transmit Mailbox 0 Empty */
+#define CAN_TSR_TME1 ((uint32_t)0x08000000) /*!<Transmit Mailbox 1 Empty */
+#define CAN_TSR_TME2 ((uint32_t)0x10000000) /*!<Transmit Mailbox 2 Empty */
+
+#define CAN_TSR_LOW ((uint32_t)0xE0000000) /*!<LOW[2:0] bits */
+#define CAN_TSR_LOW0 ((uint32_t)0x20000000) /*!<Lowest Priority Flag for Mailbox 0 */
+#define CAN_TSR_LOW1 ((uint32_t)0x40000000) /*!<Lowest Priority Flag for Mailbox 1 */
+#define CAN_TSR_LOW2 ((uint32_t)0x80000000) /*!<Lowest Priority Flag for Mailbox 2 */
+
+/******************* Bit definition for CAN_RF0R register *******************/
+#define CAN_RF0R_FMP0 ((uint8_t)0x03) /*!<FIFO 0 Message Pending */
+#define CAN_RF0R_FULL0 ((uint8_t)0x08) /*!<FIFO 0 Full */
+#define CAN_RF0R_FOVR0 ((uint8_t)0x10) /*!<FIFO 0 Overrun */
+#define CAN_RF0R_RFOM0 ((uint8_t)0x20) /*!<Release FIFO 0 Output Mailbox */
+
+/******************* Bit definition for CAN_RF1R register *******************/
+#define CAN_RF1R_FMP1 ((uint8_t)0x03) /*!<FIFO 1 Message Pending */
+#define CAN_RF1R_FULL1 ((uint8_t)0x08) /*!<FIFO 1 Full */
+#define CAN_RF1R_FOVR1 ((uint8_t)0x10) /*!<FIFO 1 Overrun */
+#define CAN_RF1R_RFOM1 ((uint8_t)0x20) /*!<Release FIFO 1 Output Mailbox */
+
+/******************** Bit definition for CAN_IER register *******************/
+#define CAN_IER_TMEIE ((uint32_t)0x00000001) /*!<Transmit Mailbox Empty Interrupt Enable */
+#define CAN_IER_FMPIE0 ((uint32_t)0x00000002) /*!<FIFO Message Pending Interrupt Enable */
+#define CAN_IER_FFIE0 ((uint32_t)0x00000004) /*!<FIFO Full Interrupt Enable */
+#define CAN_IER_FOVIE0 ((uint32_t)0x00000008) /*!<FIFO Overrun Interrupt Enable */
+#define CAN_IER_FMPIE1 ((uint32_t)0x00000010) /*!<FIFO Message Pending Interrupt Enable */
+#define CAN_IER_FFIE1 ((uint32_t)0x00000020) /*!<FIFO Full Interrupt Enable */
+#define CAN_IER_FOVIE1 ((uint32_t)0x00000040) /*!<FIFO Overrun Interrupt Enable */
+#define CAN_IER_EWGIE ((uint32_t)0x00000100) /*!<Error Warning Interrupt Enable */
+#define CAN_IER_EPVIE ((uint32_t)0x00000200) /*!<Error Passive Interrupt Enable */
+#define CAN_IER_BOFIE ((uint32_t)0x00000400) /*!<Bus-Off Interrupt Enable */
+#define CAN_IER_LECIE ((uint32_t)0x00000800) /*!<Last Error Code Interrupt Enable */
+#define CAN_IER_ERRIE ((uint32_t)0x00008000) /*!<Error Interrupt Enable */
+#define CAN_IER_WKUIE ((uint32_t)0x00010000) /*!<Wakeup Interrupt Enable */
+#define CAN_IER_SLKIE ((uint32_t)0x00020000) /*!<Sleep Interrupt Enable */
+
+/******************** Bit definition for CAN_ESR register *******************/
+#define CAN_ESR_EWGF ((uint32_t)0x00000001) /*!<Error Warning Flag */
+#define CAN_ESR_EPVF ((uint32_t)0x00000002) /*!<Error Passive Flag */
+#define CAN_ESR_BOFF ((uint32_t)0x00000004) /*!<Bus-Off Flag */
+
+#define CAN_ESR_LEC ((uint32_t)0x00000070) /*!<LEC[2:0] bits (Last Error Code) */
+#define CAN_ESR_LEC_0 ((uint32_t)0x00000010) /*!<Bit 0 */
+#define CAN_ESR_LEC_1 ((uint32_t)0x00000020) /*!<Bit 1 */
+#define CAN_ESR_LEC_2 ((uint32_t)0x00000040) /*!<Bit 2 */
+
+#define CAN_ESR_TEC ((uint32_t)0x00FF0000) /*!<Least significant byte of the 9-bit Transmit Error Counter */
+#define CAN_ESR_REC ((uint32_t)0xFF000000) /*!<Receive Error Counter */
+
+/******************* Bit definition for CAN_BTR register ********************/
+#define CAN_BTR_BRP ((uint32_t)0x000003FF) /*!<Baud Rate Prescaler */
+#define CAN_BTR_TS1 ((uint32_t)0x000F0000) /*!<Time Segment 1 */
+#define CAN_BTR_TS2 ((uint32_t)0x00700000) /*!<Time Segment 2 */
+#define CAN_BTR_SJW ((uint32_t)0x03000000) /*!<Resynchronization Jump Width */
+#define CAN_BTR_LBKM ((uint32_t)0x40000000) /*!<Loop Back Mode (Debug) */
+#define CAN_BTR_SILM ((uint32_t)0x80000000) /*!<Silent Mode */
+
+/*!<Mailbox registers */
+/****************** Bit definition for CAN_TI0R register ********************/
+#define CAN_TI0R_TXRQ ((uint32_t)0x00000001) /*!<Transmit Mailbox Request */
+#define CAN_TI0R_RTR ((uint32_t)0x00000002) /*!<Remote Transmission Request */
+#define CAN_TI0R_IDE ((uint32_t)0x00000004) /*!<Identifier Extension */
+#define CAN_TI0R_EXID ((uint32_t)0x001FFFF8) /*!<Extended Identifier */
+#define CAN_TI0R_STID ((uint32_t)0xFFE00000) /*!<Standard Identifier or Extended Identifier */
+
+/****************** Bit definition for CAN_TDT0R register *******************/
+#define CAN_TDT0R_DLC ((uint32_t)0x0000000F) /*!<Data Length Code */
+#define CAN_TDT0R_TGT ((uint32_t)0x00000100) /*!<Transmit Global Time */
+#define CAN_TDT0R_TIME ((uint32_t)0xFFFF0000) /*!<Message Time Stamp */
+
+/****************** Bit definition for CAN_TDL0R register *******************/
+#define CAN_TDL0R_DATA0 ((uint32_t)0x000000FF) /*!<Data byte 0 */
+#define CAN_TDL0R_DATA1 ((uint32_t)0x0000FF00) /*!<Data byte 1 */
+#define CAN_TDL0R_DATA2 ((uint32_t)0x00FF0000) /*!<Data byte 2 */
+#define CAN_TDL0R_DATA3 ((uint32_t)0xFF000000) /*!<Data byte 3 */
+
+/****************** Bit definition for CAN_TDH0R register *******************/
+#define CAN_TDH0R_DATA4 ((uint32_t)0x000000FF) /*!<Data byte 4 */
+#define CAN_TDH0R_DATA5 ((uint32_t)0x0000FF00) /*!<Data byte 5 */
+#define CAN_TDH0R_DATA6 ((uint32_t)0x00FF0000) /*!<Data byte 6 */
+#define CAN_TDH0R_DATA7 ((uint32_t)0xFF000000) /*!<Data byte 7 */
+
+/******************* Bit definition for CAN_TI1R register *******************/
+#define CAN_TI1R_TXRQ ((uint32_t)0x00000001) /*!<Transmit Mailbox Request */
+#define CAN_TI1R_RTR ((uint32_t)0x00000002) /*!<Remote Transmission Request */
+#define CAN_TI1R_IDE ((uint32_t)0x00000004) /*!<Identifier Extension */
+#define CAN_TI1R_EXID ((uint32_t)0x001FFFF8) /*!<Extended Identifier */
+#define CAN_TI1R_STID ((uint32_t)0xFFE00000) /*!<Standard Identifier or Extended Identifier */
+
+/******************* Bit definition for CAN_TDT1R register ******************/
+#define CAN_TDT1R_DLC ((uint32_t)0x0000000F) /*!<Data Length Code */
+#define CAN_TDT1R_TGT ((uint32_t)0x00000100) /*!<Transmit Global Time */
+#define CAN_TDT1R_TIME ((uint32_t)0xFFFF0000) /*!<Message Time Stamp */
+
+/******************* Bit definition for CAN_TDL1R register ******************/
+#define CAN_TDL1R_DATA0 ((uint32_t)0x000000FF) /*!<Data byte 0 */
+#define CAN_TDL1R_DATA1 ((uint32_t)0x0000FF00) /*!<Data byte 1 */
+#define CAN_TDL1R_DATA2 ((uint32_t)0x00FF0000) /*!<Data byte 2 */
+#define CAN_TDL1R_DATA3 ((uint32_t)0xFF000000) /*!<Data byte 3 */
+
+/******************* Bit definition for CAN_TDH1R register ******************/
+#define CAN_TDH1R_DATA4 ((uint32_t)0x000000FF) /*!<Data byte 4 */
+#define CAN_TDH1R_DATA5 ((uint32_t)0x0000FF00) /*!<Data byte 5 */
+#define CAN_TDH1R_DATA6 ((uint32_t)0x00FF0000) /*!<Data byte 6 */
+#define CAN_TDH1R_DATA7 ((uint32_t)0xFF000000) /*!<Data byte 7 */
+
+/******************* Bit definition for CAN_TI2R register *******************/
+#define CAN_TI2R_TXRQ ((uint32_t)0x00000001) /*!<Transmit Mailbox Request */
+#define CAN_TI2R_RTR ((uint32_t)0x00000002) /*!<Remote Transmission Request */
+#define CAN_TI2R_IDE ((uint32_t)0x00000004) /*!<Identifier Extension */
+#define CAN_TI2R_EXID ((uint32_t)0x001FFFF8) /*!<Extended identifier */
+#define CAN_TI2R_STID ((uint32_t)0xFFE00000) /*!<Standard Identifier or Extended Identifier */
+
+/******************* Bit definition for CAN_TDT2R register ******************/
+#define CAN_TDT2R_DLC ((uint32_t)0x0000000F) /*!<Data Length Code */
+#define CAN_TDT2R_TGT ((uint32_t)0x00000100) /*!<Transmit Global Time */
+#define CAN_TDT2R_TIME ((uint32_t)0xFFFF0000) /*!<Message Time Stamp */
+
+/******************* Bit definition for CAN_TDL2R register ******************/
+#define CAN_TDL2R_DATA0 ((uint32_t)0x000000FF) /*!<Data byte 0 */
+#define CAN_TDL2R_DATA1 ((uint32_t)0x0000FF00) /*!<Data byte 1 */
+#define CAN_TDL2R_DATA2 ((uint32_t)0x00FF0000) /*!<Data byte 2 */
+#define CAN_TDL2R_DATA3 ((uint32_t)0xFF000000) /*!<Data byte 3 */
+
+/******************* Bit definition for CAN_TDH2R register ******************/
+#define CAN_TDH2R_DATA4 ((uint32_t)0x000000FF) /*!<Data byte 4 */
+#define CAN_TDH2R_DATA5 ((uint32_t)0x0000FF00) /*!<Data byte 5 */
+#define CAN_TDH2R_DATA6 ((uint32_t)0x00FF0000) /*!<Data byte 6 */
+#define CAN_TDH2R_DATA7 ((uint32_t)0xFF000000) /*!<Data byte 7 */
+
+/******************* Bit definition for CAN_RI0R register *******************/
+#define CAN_RI0R_RTR ((uint32_t)0x00000002) /*!<Remote Transmission Request */
+#define CAN_RI0R_IDE ((uint32_t)0x00000004) /*!<Identifier Extension */
+#define CAN_RI0R_EXID ((uint32_t)0x001FFFF8) /*!<Extended Identifier */
+#define CAN_RI0R_STID ((uint32_t)0xFFE00000) /*!<Standard Identifier or Extended Identifier */
+
+/******************* Bit definition for CAN_RDT0R register ******************/
+#define CAN_RDT0R_DLC ((uint32_t)0x0000000F) /*!<Data Length Code */
+#define CAN_RDT0R_FMI ((uint32_t)0x0000FF00) /*!<Filter Match Index */
+#define CAN_RDT0R_TIME ((uint32_t)0xFFFF0000) /*!<Message Time Stamp */
+
+/******************* Bit definition for CAN_RDL0R register ******************/
+#define CAN_RDL0R_DATA0 ((uint32_t)0x000000FF) /*!<Data byte 0 */
+#define CAN_RDL0R_DATA1 ((uint32_t)0x0000FF00) /*!<Data byte 1 */
+#define CAN_RDL0R_DATA2 ((uint32_t)0x00FF0000) /*!<Data byte 2 */
+#define CAN_RDL0R_DATA3 ((uint32_t)0xFF000000) /*!<Data byte 3 */
+
+/******************* Bit definition for CAN_RDH0R register ******************/
+#define CAN_RDH0R_DATA4 ((uint32_t)0x000000FF) /*!<Data byte 4 */
+#define CAN_RDH0R_DATA5 ((uint32_t)0x0000FF00) /*!<Data byte 5 */
+#define CAN_RDH0R_DATA6 ((uint32_t)0x00FF0000) /*!<Data byte 6 */
+#define CAN_RDH0R_DATA7 ((uint32_t)0xFF000000) /*!<Data byte 7 */
+
+/******************* Bit definition for CAN_RI1R register *******************/
+#define CAN_RI1R_RTR ((uint32_t)0x00000002) /*!<Remote Transmission Request */
+#define CAN_RI1R_IDE ((uint32_t)0x00000004) /*!<Identifier Extension */
+#define CAN_RI1R_EXID ((uint32_t)0x001FFFF8) /*!<Extended identifier */
+#define CAN_RI1R_STID ((uint32_t)0xFFE00000) /*!<Standard Identifier or Extended Identifier */
+
+/******************* Bit definition for CAN_RDT1R register ******************/
+#define CAN_RDT1R_DLC ((uint32_t)0x0000000F) /*!<Data Length Code */
+#define CAN_RDT1R_FMI ((uint32_t)0x0000FF00) /*!<Filter Match Index */
+#define CAN_RDT1R_TIME ((uint32_t)0xFFFF0000) /*!<Message Time Stamp */
+
+/******************* Bit definition for CAN_RDL1R register ******************/
+#define CAN_RDL1R_DATA0 ((uint32_t)0x000000FF) /*!<Data byte 0 */
+#define CAN_RDL1R_DATA1 ((uint32_t)0x0000FF00) /*!<Data byte 1 */
+#define CAN_RDL1R_DATA2 ((uint32_t)0x00FF0000) /*!<Data byte 2 */
+#define CAN_RDL1R_DATA3 ((uint32_t)0xFF000000) /*!<Data byte 3 */
+
+/******************* Bit definition for CAN_RDH1R register ******************/
+#define CAN_RDH1R_DATA4 ((uint32_t)0x000000FF) /*!<Data byte 4 */
+#define CAN_RDH1R_DATA5 ((uint32_t)0x0000FF00) /*!<Data byte 5 */
+#define CAN_RDH1R_DATA6 ((uint32_t)0x00FF0000) /*!<Data byte 6 */
+#define CAN_RDH1R_DATA7 ((uint32_t)0xFF000000) /*!<Data byte 7 */
+
+/*!<CAN filter registers */
+/******************* Bit definition for CAN_FMR register ********************/
+#define CAN_FMR_FINIT ((uint8_t)0x01) /*!<Filter Init Mode */
+
+/******************* Bit definition for CAN_FM1R register *******************/
+#define CAN_FM1R_FBM ((uint16_t)0x3FFF) /*!<Filter Mode */
+#define CAN_FM1R_FBM0 ((uint16_t)0x0001) /*!<Filter Init Mode bit 0 */
+#define CAN_FM1R_FBM1 ((uint16_t)0x0002) /*!<Filter Init Mode bit 1 */
+#define CAN_FM1R_FBM2 ((uint16_t)0x0004) /*!<Filter Init Mode bit 2 */
+#define CAN_FM1R_FBM3 ((uint16_t)0x0008) /*!<Filter Init Mode bit 3 */
+#define CAN_FM1R_FBM4 ((uint16_t)0x0010) /*!<Filter Init Mode bit 4 */
+#define CAN_FM1R_FBM5 ((uint16_t)0x0020) /*!<Filter Init Mode bit 5 */
+#define CAN_FM1R_FBM6 ((uint16_t)0x0040) /*!<Filter Init Mode bit 6 */
+#define CAN_FM1R_FBM7 ((uint16_t)0x0080) /*!<Filter Init Mode bit 7 */
+#define CAN_FM1R_FBM8 ((uint16_t)0x0100) /*!<Filter Init Mode bit 8 */
+#define CAN_FM1R_FBM9 ((uint16_t)0x0200) /*!<Filter Init Mode bit 9 */
+#define CAN_FM1R_FBM10 ((uint16_t)0x0400) /*!<Filter Init Mode bit 10 */
+#define CAN_FM1R_FBM11 ((uint16_t)0x0800) /*!<Filter Init Mode bit 11 */
+#define CAN_FM1R_FBM12 ((uint16_t)0x1000) /*!<Filter Init Mode bit 12 */
+#define CAN_FM1R_FBM13 ((uint16_t)0x2000) /*!<Filter Init Mode bit 13 */
+
+/******************* Bit definition for CAN_FS1R register *******************/
+#define CAN_FS1R_FSC ((uint16_t)0x3FFF) /*!<Filter Scale Configuration */
+#define CAN_FS1R_FSC0 ((uint16_t)0x0001) /*!<Filter Scale Configuration bit 0 */
+#define CAN_FS1R_FSC1 ((uint16_t)0x0002) /*!<Filter Scale Configuration bit 1 */
+#define CAN_FS1R_FSC2 ((uint16_t)0x0004) /*!<Filter Scale Configuration bit 2 */
+#define CAN_FS1R_FSC3 ((uint16_t)0x0008) /*!<Filter Scale Configuration bit 3 */
+#define CAN_FS1R_FSC4 ((uint16_t)0x0010) /*!<Filter Scale Configuration bit 4 */
+#define CAN_FS1R_FSC5 ((uint16_t)0x0020) /*!<Filter Scale Configuration bit 5 */
+#define CAN_FS1R_FSC6 ((uint16_t)0x0040) /*!<Filter Scale Configuration bit 6 */
+#define CAN_FS1R_FSC7 ((uint16_t)0x0080) /*!<Filter Scale Configuration bit 7 */
+#define CAN_FS1R_FSC8 ((uint16_t)0x0100) /*!<Filter Scale Configuration bit 8 */
+#define CAN_FS1R_FSC9 ((uint16_t)0x0200) /*!<Filter Scale Configuration bit 9 */
+#define CAN_FS1R_FSC10 ((uint16_t)0x0400) /*!<Filter Scale Configuration bit 10 */
+#define CAN_FS1R_FSC11 ((uint16_t)0x0800) /*!<Filter Scale Configuration bit 11 */
+#define CAN_FS1R_FSC12 ((uint16_t)0x1000) /*!<Filter Scale Configuration bit 12 */
+#define CAN_FS1R_FSC13 ((uint16_t)0x2000) /*!<Filter Scale Configuration bit 13 */
+
+/****************** Bit definition for CAN_FFA1R register *******************/
+#define CAN_FFA1R_FFA ((uint16_t)0x3FFF) /*!<Filter FIFO Assignment */
+#define CAN_FFA1R_FFA0 ((uint16_t)0x0001) /*!<Filter FIFO Assignment for Filter 0 */
+#define CAN_FFA1R_FFA1 ((uint16_t)0x0002) /*!<Filter FIFO Assignment for Filter 1 */
+#define CAN_FFA1R_FFA2 ((uint16_t)0x0004) /*!<Filter FIFO Assignment for Filter 2 */
+#define CAN_FFA1R_FFA3 ((uint16_t)0x0008) /*!<Filter FIFO Assignment for Filter 3 */
+#define CAN_FFA1R_FFA4 ((uint16_t)0x0010) /*!<Filter FIFO Assignment for Filter 4 */
+#define CAN_FFA1R_FFA5 ((uint16_t)0x0020) /*!<Filter FIFO Assignment for Filter 5 */
+#define CAN_FFA1R_FFA6 ((uint16_t)0x0040) /*!<Filter FIFO Assignment for Filter 6 */
+#define CAN_FFA1R_FFA7 ((uint16_t)0x0080) /*!<Filter FIFO Assignment for Filter 7 */
+#define CAN_FFA1R_FFA8 ((uint16_t)0x0100) /*!<Filter FIFO Assignment for Filter 8 */
+#define CAN_FFA1R_FFA9 ((uint16_t)0x0200) /*!<Filter FIFO Assignment for Filter 9 */
+#define CAN_FFA1R_FFA10 ((uint16_t)0x0400) /*!<Filter FIFO Assignment for Filter 10 */
+#define CAN_FFA1R_FFA11 ((uint16_t)0x0800) /*!<Filter FIFO Assignment for Filter 11 */
+#define CAN_FFA1R_FFA12 ((uint16_t)0x1000) /*!<Filter FIFO Assignment for Filter 12 */
+#define CAN_FFA1R_FFA13 ((uint16_t)0x2000) /*!<Filter FIFO Assignment for Filter 13 */
+
+/******************* Bit definition for CAN_FA1R register *******************/
+#define CAN_FA1R_FACT ((uint16_t)0x3FFF) /*!<Filter Active */
+#define CAN_FA1R_FACT0 ((uint16_t)0x0001) /*!<Filter 0 Active */
+#define CAN_FA1R_FACT1 ((uint16_t)0x0002) /*!<Filter 1 Active */
+#define CAN_FA1R_FACT2 ((uint16_t)0x0004) /*!<Filter 2 Active */
+#define CAN_FA1R_FACT3 ((uint16_t)0x0008) /*!<Filter 3 Active */
+#define CAN_FA1R_FACT4 ((uint16_t)0x0010) /*!<Filter 4 Active */
+#define CAN_FA1R_FACT5 ((uint16_t)0x0020) /*!<Filter 5 Active */
+#define CAN_FA1R_FACT6 ((uint16_t)0x0040) /*!<Filter 6 Active */
+#define CAN_FA1R_FACT7 ((uint16_t)0x0080) /*!<Filter 7 Active */
+#define CAN_FA1R_FACT8 ((uint16_t)0x0100) /*!<Filter 8 Active */
+#define CAN_FA1R_FACT9 ((uint16_t)0x0200) /*!<Filter 9 Active */
+#define CAN_FA1R_FACT10 ((uint16_t)0x0400) /*!<Filter 10 Active */
+#define CAN_FA1R_FACT11 ((uint16_t)0x0800) /*!<Filter 11 Active */
+#define CAN_FA1R_FACT12 ((uint16_t)0x1000) /*!<Filter 12 Active */
+#define CAN_FA1R_FACT13 ((uint16_t)0x2000) /*!<Filter 13 Active */
+
+/******************* Bit definition for CAN_F0R1 register *******************/
+#define CAN_F0R1_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F0R1_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F0R1_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F0R1_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F0R1_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F0R1_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F0R1_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F0R1_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F0R1_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F0R1_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F0R1_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F0R1_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F0R1_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F0R1_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F0R1_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F0R1_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F0R1_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F0R1_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F0R1_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F0R1_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F0R1_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F0R1_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F0R1_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F0R1_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F0R1_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F0R1_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F0R1_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F0R1_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F0R1_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F0R1_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F0R1_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F0R1_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F1R1 register *******************/
+#define CAN_F1R1_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F1R1_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F1R1_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F1R1_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F1R1_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F1R1_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F1R1_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F1R1_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F1R1_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F1R1_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F1R1_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F1R1_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F1R1_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F1R1_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F1R1_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F1R1_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F1R1_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F1R1_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F1R1_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F1R1_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F1R1_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F1R1_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F1R1_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F1R1_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F1R1_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F1R1_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F1R1_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F1R1_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F1R1_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F1R1_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F1R1_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F1R1_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F2R1 register *******************/
+#define CAN_F2R1_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F2R1_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F2R1_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F2R1_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F2R1_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F2R1_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F2R1_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F2R1_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F2R1_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F2R1_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F2R1_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F2R1_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F2R1_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F2R1_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F2R1_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F2R1_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F2R1_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F2R1_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F2R1_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F2R1_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F2R1_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F2R1_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F2R1_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F2R1_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F2R1_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F2R1_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F2R1_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F2R1_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F2R1_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F2R1_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F2R1_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F2R1_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F3R1 register *******************/
+#define CAN_F3R1_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F3R1_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F3R1_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F3R1_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F3R1_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F3R1_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F3R1_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F3R1_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F3R1_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F3R1_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F3R1_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F3R1_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F3R1_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F3R1_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F3R1_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F3R1_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F3R1_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F3R1_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F3R1_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F3R1_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F3R1_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F3R1_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F3R1_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F3R1_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F3R1_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F3R1_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F3R1_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F3R1_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F3R1_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F3R1_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F3R1_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F3R1_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F4R1 register *******************/
+#define CAN_F4R1_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F4R1_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F4R1_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F4R1_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F4R1_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F4R1_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F4R1_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F4R1_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F4R1_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F4R1_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F4R1_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F4R1_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F4R1_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F4R1_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F4R1_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F4R1_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F4R1_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F4R1_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F4R1_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F4R1_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F4R1_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F4R1_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F4R1_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F4R1_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F4R1_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F4R1_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F4R1_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F4R1_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F4R1_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F4R1_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F4R1_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F4R1_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F5R1 register *******************/
+#define CAN_F5R1_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F5R1_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F5R1_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F5R1_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F5R1_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F5R1_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F5R1_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F5R1_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F5R1_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F5R1_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F5R1_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F5R1_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F5R1_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F5R1_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F5R1_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F5R1_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F5R1_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F5R1_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F5R1_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F5R1_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F5R1_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F5R1_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F5R1_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F5R1_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F5R1_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F5R1_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F5R1_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F5R1_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F5R1_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F5R1_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F5R1_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F5R1_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F6R1 register *******************/
+#define CAN_F6R1_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F6R1_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F6R1_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F6R1_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F6R1_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F6R1_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F6R1_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F6R1_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F6R1_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F6R1_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F6R1_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F6R1_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F6R1_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F6R1_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F6R1_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F6R1_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F6R1_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F6R1_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F6R1_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F6R1_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F6R1_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F6R1_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F6R1_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F6R1_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F6R1_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F6R1_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F6R1_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F6R1_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F6R1_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F6R1_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F6R1_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F6R1_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F7R1 register *******************/
+#define CAN_F7R1_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F7R1_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F7R1_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F7R1_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F7R1_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F7R1_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F7R1_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F7R1_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F7R1_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F7R1_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F7R1_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F7R1_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F7R1_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F7R1_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F7R1_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F7R1_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F7R1_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F7R1_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F7R1_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F7R1_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F7R1_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F7R1_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F7R1_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F7R1_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F7R1_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F7R1_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F7R1_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F7R1_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F7R1_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F7R1_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F7R1_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F7R1_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F8R1 register *******************/
+#define CAN_F8R1_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F8R1_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F8R1_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F8R1_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F8R1_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F8R1_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F8R1_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F8R1_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F8R1_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F8R1_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F8R1_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F8R1_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F8R1_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F8R1_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F8R1_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F8R1_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F8R1_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F8R1_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F8R1_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F8R1_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F8R1_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F8R1_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F8R1_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F8R1_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F8R1_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F8R1_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F8R1_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F8R1_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F8R1_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F8R1_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F8R1_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F8R1_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F9R1 register *******************/
+#define CAN_F9R1_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F9R1_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F9R1_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F9R1_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F9R1_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F9R1_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F9R1_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F9R1_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F9R1_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F9R1_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F9R1_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F9R1_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F9R1_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F9R1_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F9R1_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F9R1_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F9R1_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F9R1_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F9R1_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F9R1_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F9R1_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F9R1_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F9R1_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F9R1_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F9R1_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F9R1_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F9R1_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F9R1_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F9R1_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F9R1_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F9R1_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F9R1_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F10R1 register ******************/
+#define CAN_F10R1_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F10R1_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F10R1_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F10R1_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F10R1_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F10R1_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F10R1_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F10R1_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F10R1_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F10R1_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F10R1_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F10R1_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F10R1_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F10R1_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F10R1_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F10R1_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F10R1_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F10R1_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F10R1_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F10R1_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F10R1_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F10R1_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F10R1_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F10R1_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F10R1_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F10R1_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F10R1_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F10R1_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F10R1_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F10R1_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F10R1_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F10R1_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F11R1 register ******************/
+#define CAN_F11R1_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F11R1_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F11R1_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F11R1_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F11R1_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F11R1_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F11R1_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F11R1_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F11R1_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F11R1_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F11R1_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F11R1_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F11R1_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F11R1_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F11R1_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F11R1_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F11R1_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F11R1_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F11R1_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F11R1_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F11R1_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F11R1_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F11R1_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F11R1_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F11R1_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F11R1_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F11R1_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F11R1_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F11R1_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F11R1_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F11R1_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F11R1_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F12R1 register ******************/
+#define CAN_F12R1_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F12R1_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F12R1_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F12R1_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F12R1_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F12R1_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F12R1_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F12R1_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F12R1_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F12R1_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F12R1_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F12R1_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F12R1_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F12R1_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F12R1_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F12R1_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F12R1_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F12R1_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F12R1_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F12R1_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F12R1_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F12R1_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F12R1_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F12R1_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F12R1_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F12R1_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F12R1_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F12R1_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F12R1_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F12R1_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F12R1_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F12R1_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F13R1 register ******************/
+#define CAN_F13R1_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F13R1_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F13R1_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F13R1_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F13R1_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F13R1_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F13R1_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F13R1_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F13R1_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F13R1_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F13R1_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F13R1_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F13R1_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F13R1_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F13R1_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F13R1_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F13R1_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F13R1_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F13R1_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F13R1_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F13R1_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F13R1_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F13R1_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F13R1_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F13R1_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F13R1_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F13R1_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F13R1_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F13R1_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F13R1_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F13R1_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F13R1_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F0R2 register *******************/
+#define CAN_F0R2_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F0R2_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F0R2_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F0R2_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F0R2_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F0R2_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F0R2_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F0R2_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F0R2_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F0R2_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F0R2_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F0R2_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F0R2_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F0R2_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F0R2_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F0R2_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F0R2_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F0R2_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F0R2_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F0R2_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F0R2_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F0R2_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F0R2_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F0R2_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F0R2_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F0R2_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F0R2_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F0R2_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F0R2_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F0R2_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F0R2_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F0R2_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F1R2 register *******************/
+#define CAN_F1R2_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F1R2_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F1R2_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F1R2_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F1R2_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F1R2_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F1R2_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F1R2_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F1R2_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F1R2_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F1R2_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F1R2_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F1R2_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F1R2_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F1R2_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F1R2_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F1R2_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F1R2_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F1R2_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F1R2_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F1R2_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F1R2_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F1R2_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F1R2_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F1R2_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F1R2_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F1R2_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F1R2_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F1R2_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F1R2_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F1R2_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F1R2_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F2R2 register *******************/
+#define CAN_F2R2_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F2R2_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F2R2_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F2R2_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F2R2_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F2R2_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F2R2_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F2R2_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F2R2_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F2R2_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F2R2_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F2R2_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F2R2_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F2R2_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F2R2_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F2R2_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F2R2_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F2R2_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F2R2_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F2R2_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F2R2_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F2R2_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F2R2_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F2R2_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F2R2_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F2R2_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F2R2_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F2R2_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F2R2_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F2R2_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F2R2_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F2R2_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F3R2 register *******************/
+#define CAN_F3R2_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F3R2_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F3R2_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F3R2_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F3R2_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F3R2_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F3R2_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F3R2_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F3R2_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F3R2_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F3R2_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F3R2_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F3R2_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F3R2_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F3R2_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F3R2_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F3R2_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F3R2_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F3R2_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F3R2_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F3R2_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F3R2_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F3R2_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F3R2_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F3R2_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F3R2_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F3R2_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F3R2_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F3R2_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F3R2_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F3R2_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F3R2_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F4R2 register *******************/
+#define CAN_F4R2_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F4R2_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F4R2_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F4R2_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F4R2_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F4R2_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F4R2_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F4R2_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F4R2_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F4R2_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F4R2_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F4R2_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F4R2_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F4R2_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F4R2_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F4R2_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F4R2_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F4R2_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F4R2_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F4R2_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F4R2_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F4R2_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F4R2_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F4R2_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F4R2_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F4R2_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F4R2_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F4R2_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F4R2_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F4R2_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F4R2_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F4R2_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F5R2 register *******************/
+#define CAN_F5R2_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F5R2_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F5R2_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F5R2_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F5R2_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F5R2_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F5R2_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F5R2_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F5R2_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F5R2_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F5R2_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F5R2_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F5R2_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F5R2_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F5R2_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F5R2_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F5R2_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F5R2_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F5R2_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F5R2_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F5R2_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F5R2_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F5R2_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F5R2_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F5R2_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F5R2_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F5R2_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F5R2_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F5R2_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F5R2_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F5R2_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F5R2_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F6R2 register *******************/
+#define CAN_F6R2_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F6R2_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F6R2_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F6R2_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F6R2_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F6R2_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F6R2_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F6R2_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F6R2_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F6R2_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F6R2_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F6R2_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F6R2_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F6R2_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F6R2_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F6R2_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F6R2_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F6R2_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F6R2_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F6R2_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F6R2_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F6R2_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F6R2_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F6R2_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F6R2_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F6R2_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F6R2_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F6R2_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F6R2_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F6R2_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F6R2_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F6R2_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F7R2 register *******************/
+#define CAN_F7R2_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F7R2_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F7R2_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F7R2_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F7R2_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F7R2_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F7R2_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F7R2_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F7R2_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F7R2_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F7R2_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F7R2_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F7R2_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F7R2_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F7R2_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F7R2_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F7R2_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F7R2_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F7R2_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F7R2_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F7R2_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F7R2_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F7R2_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F7R2_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F7R2_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F7R2_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F7R2_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F7R2_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F7R2_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F7R2_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F7R2_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F7R2_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F8R2 register *******************/
+#define CAN_F8R2_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F8R2_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F8R2_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F8R2_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F8R2_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F8R2_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F8R2_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F8R2_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F8R2_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F8R2_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F8R2_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F8R2_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F8R2_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F8R2_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F8R2_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F8R2_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F8R2_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F8R2_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F8R2_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F8R2_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F8R2_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F8R2_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F8R2_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F8R2_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F8R2_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F8R2_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F8R2_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F8R2_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F8R2_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F8R2_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F8R2_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F8R2_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F9R2 register *******************/
+#define CAN_F9R2_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F9R2_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F9R2_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F9R2_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F9R2_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F9R2_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F9R2_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F9R2_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F9R2_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F9R2_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F9R2_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F9R2_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F9R2_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F9R2_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F9R2_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F9R2_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F9R2_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F9R2_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F9R2_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F9R2_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F9R2_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F9R2_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F9R2_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F9R2_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F9R2_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F9R2_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F9R2_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F9R2_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F9R2_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F9R2_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F9R2_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F9R2_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F10R2 register ******************/
+#define CAN_F10R2_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F10R2_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F10R2_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F10R2_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F10R2_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F10R2_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F10R2_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F10R2_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F10R2_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F10R2_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F10R2_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F10R2_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F10R2_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F10R2_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F10R2_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F10R2_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F10R2_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F10R2_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F10R2_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F10R2_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F10R2_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F10R2_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F10R2_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F10R2_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F10R2_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F10R2_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F10R2_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F10R2_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F10R2_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F10R2_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F10R2_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F10R2_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F11R2 register ******************/
+#define CAN_F11R2_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F11R2_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F11R2_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F11R2_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F11R2_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F11R2_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F11R2_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F11R2_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F11R2_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F11R2_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F11R2_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F11R2_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F11R2_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F11R2_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F11R2_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F11R2_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F11R2_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F11R2_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F11R2_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F11R2_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F11R2_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F11R2_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F11R2_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F11R2_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F11R2_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F11R2_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F11R2_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F11R2_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F11R2_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F11R2_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F11R2_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F11R2_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F12R2 register ******************/
+#define CAN_F12R2_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F12R2_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F12R2_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F12R2_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F12R2_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F12R2_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F12R2_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F12R2_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F12R2_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F12R2_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F12R2_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F12R2_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F12R2_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F12R2_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F12R2_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F12R2_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F12R2_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F12R2_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F12R2_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F12R2_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F12R2_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F12R2_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F12R2_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F12R2_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F12R2_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F12R2_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F12R2_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F12R2_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F12R2_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F12R2_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F12R2_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F12R2_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F13R2 register ******************/
+#define CAN_F13R2_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F13R2_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F13R2_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F13R2_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F13R2_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F13R2_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F13R2_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F13R2_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F13R2_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F13R2_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F13R2_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F13R2_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F13R2_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F13R2_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F13R2_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F13R2_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F13R2_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F13R2_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F13R2_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F13R2_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F13R2_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F13R2_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F13R2_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F13R2_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F13R2_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F13R2_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F13R2_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F13R2_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F13R2_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F13R2_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F13R2_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F13R2_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************************************************************************/
+/* */
+/* CRC calculation unit (CRC) */
+/* */
+/******************************************************************************/
+/******************* Bit definition for CRC_DR register *********************/
+#define CRC_DR_DR ((uint32_t)0xFFFFFFFF) /*!< Data register bits */
+
+/******************* Bit definition for CRC_IDR register ********************/
+#define CRC_IDR_IDR ((uint8_t)0xFF) /*!< General-purpose 8-bit data register bits */
+
+/******************** Bit definition for CRC_CR register ********************/
+#define CRC_CR_RESET ((uint32_t)0x00000001) /*!< RESET the CRC computation unit bit */
+#define CRC_CR_POLSIZE ((uint32_t)0x00000018) /*!< Polynomial size bits */
+#define CRC_CR_POLSIZE_0 ((uint32_t)0x00000008) /*!< Polynomial size bit 0 */
+#define CRC_CR_POLSIZE_1 ((uint32_t)0x00000010) /*!< Polynomial size bit 1 */
+#define CRC_CR_REV_IN ((uint32_t)0x00000060) /*!< REV_IN Reverse Input Data bits */
+#define CRC_CR_REV_IN_0 ((uint32_t)0x00000020) /*!< Bit 0 */
+#define CRC_CR_REV_IN_1 ((uint32_t)0x00000040) /*!< Bit 1 */
+#define CRC_CR_REV_OUT ((uint32_t)0x00000080) /*!< REV_OUT Reverse Output Data bits */
+
+/******************* Bit definition for CRC_INIT register *******************/
+#define CRC_INIT_INIT ((uint32_t)0xFFFFFFFF) /*!< Initial CRC value bits */
+
+/******************* Bit definition for CRC_POL register ********************/
+#define CRC_POL_POL ((uint32_t)0xFFFFFFFF) /*!< Coefficients of the polynomial */
+/******************************************************************************/
+/* */
+/* Digital to Analog Converter (DAC) */
+/* */
+/******************************************************************************/
+/******************** Bit definition for DAC_CR register ********************/
+#define DAC_CR_EN1 ((uint32_t)0x00000001) /*!< DAC channel1 enable */
+#define DAC_CR_BOFF1 ((uint32_t)0x00000002) /*!< DAC channel1 output buffer disable */
+#define DAC_CR_TEN1 ((uint32_t)0x00000004) /*!< DAC channel1 Trigger enable */
+
+#define DAC_CR_TSEL1 ((uint32_t)0x00000038) /*!< TSEL1[2:0] (DAC channel1 Trigger selection) */
+#define DAC_CR_TSEL1_0 ((uint32_t)0x00000008) /*!< Bit 0 */
+#define DAC_CR_TSEL1_1 ((uint32_t)0x00000010) /*!< Bit 1 */
+#define DAC_CR_TSEL1_2 ((uint32_t)0x00000020) /*!< Bit 2 */
+
+#define DAC_CR_WAVE1 ((uint32_t)0x000000C0) /*!< WAVE1[1:0] (DAC channel1 noise/triangle wave generation enable) */
+#define DAC_CR_WAVE1_0 ((uint32_t)0x00000040) /*!< Bit 0 */
+#define DAC_CR_WAVE1_1 ((uint32_t)0x00000080) /*!< Bit 1 */
+
+#define DAC_CR_MAMP1 ((uint32_t)0x00000F00) /*!< MAMP1[3:0] (DAC channel1 Mask/Amplitude selector) */
+#define DAC_CR_MAMP1_0 ((uint32_t)0x00000100) /*!< Bit 0 */
+#define DAC_CR_MAMP1_1 ((uint32_t)0x00000200) /*!< Bit 1 */
+#define DAC_CR_MAMP1_2 ((uint32_t)0x00000400) /*!< Bit 2 */
+#define DAC_CR_MAMP1_3 ((uint32_t)0x00000800) /*!< Bit 3 */
+
+#define DAC_CR_DMAEN1 ((uint32_t)0x00001000) /*!< DAC channel1 DMA enable */
+#define DAC_CR_EN2 ((uint32_t)0x00010000) /*!< DAC channel2 enable */
+#define DAC_CR_BOFF2 ((uint32_t)0x00020000) /*!< DAC channel2 output buffer disable */
+#define DAC_CR_TEN2 ((uint32_t)0x00040000) /*!< DAC channel2 Trigger enable */
+
+#define DAC_CR_TSEL2 ((uint32_t)0x00380000) /*!< TSEL2[2:0] (DAC channel2 Trigger selection) */
+#define DAC_CR_TSEL2_0 ((uint32_t)0x00080000) /*!< Bit 0 */
+#define DAC_CR_TSEL2_1 ((uint32_t)0x00100000) /*!< Bit 1 */
+#define DAC_CR_TSEL2_2 ((uint32_t)0x00200000) /*!< Bit 2 */
+
+#define DAC_CR_WAVE2 ((uint32_t)0x00C00000) /*!< WAVE2[1:0] (DAC channel2 noise/triangle wave generation enable) */
+#define DAC_CR_WAVE2_0 ((uint32_t)0x00400000) /*!< Bit 0 */
+#define DAC_CR_WAVE2_1 ((uint32_t)0x00800000) /*!< Bit 1 */
+
+#define DAC_CR_MAMP2 ((uint32_t)0x0F000000) /*!< MAMP2[3:0] (DAC channel2 Mask/Amplitude selector) */
+#define DAC_CR_MAMP2_0 ((uint32_t)0x01000000) /*!< Bit 0 */
+#define DAC_CR_MAMP2_1 ((uint32_t)0x02000000) /*!< Bit 1 */
+#define DAC_CR_MAMP2_2 ((uint32_t)0x04000000) /*!< Bit 2 */
+#define DAC_CR_MAMP2_3 ((uint32_t)0x08000000) /*!< Bit 3 */
+
+#define DAC_CR_DMAEN2 ((uint32_t)0x10000000) /*!< DAC channel2 DMA enabled */
+
+/***************** Bit definition for DAC_SWTRIGR register ******************/
+#define DAC_SWTRIGR_SWTRIG1 ((uint8_t)0x01) /*!< DAC channel1 software trigger */
+#define DAC_SWTRIGR_SWTRIG2 ((uint8_t)0x02) /*!< DAC channel2 software trigger */
+
+/***************** Bit definition for DAC_DHR12R1 register ******************/
+#define DAC_DHR12R1_DACC1DHR ((uint16_t)0x0FFF) /*!< DAC channel1 12-bit Right aligned data */
+
+/***************** Bit definition for DAC_DHR12L1 register ******************/
+#define DAC_DHR12L1_DACC1DHR ((uint16_t)0xFFF0) /*!< DAC channel1 12-bit Left aligned data */
+
+/****************** Bit definition for DAC_DHR8R1 register ******************/
+#define DAC_DHR8R1_DACC1DHR ((uint8_t)0xFF) /*!< DAC channel1 8-bit Right aligned data */
+
+/***************** Bit definition for DAC_DHR12R2 register ******************/
+#define DAC_DHR12R2_DACC2DHR ((uint16_t)0x0FFF) /*!< DAC channel2 12-bit Right aligned data */
+
+/***************** Bit definition for DAC_DHR12L2 register ******************/
+#define DAC_DHR12L2_DACC2DHR ((uint16_t)0xFFF0) /*!< DAC channel2 12-bit Left aligned data */
+
+/****************** Bit definition for DAC_DHR8R2 register ******************/
+#define DAC_DHR8R2_DACC2DHR ((uint8_t)0xFF) /*!< DAC channel2 8-bit Right aligned data */
+
+/***************** Bit definition for DAC_DHR12RD register ******************/
+#define DAC_DHR12RD_DACC1DHR ((uint32_t)0x00000FFF) /*!< DAC channel1 12-bit Right aligned data */
+#define DAC_DHR12RD_DACC2DHR ((uint32_t)0x0FFF0000) /*!< DAC channel2 12-bit Right aligned data */
+
+/***************** Bit definition for DAC_DHR12LD register ******************/
+#define DAC_DHR12LD_DACC1DHR ((uint32_t)0x0000FFF0) /*!< DAC channel1 12-bit Left aligned data */
+#define DAC_DHR12LD_DACC2DHR ((uint32_t)0xFFF00000) /*!< DAC channel2 12-bit Left aligned data */
+
+/****************** Bit definition for DAC_DHR8RD register ******************/
+#define DAC_DHR8RD_DACC1DHR ((uint16_t)0x00FF) /*!< DAC channel1 8-bit Right aligned data */
+#define DAC_DHR8RD_DACC2DHR ((uint16_t)0xFF00) /*!< DAC channel2 8-bit Right aligned data */
+
+/******************* Bit definition for DAC_DOR1 register *******************/
+#define DAC_DOR1_DACC1DOR ((uint16_t)0x0FFF) /*!< DAC channel1 data output */
+
+/******************* Bit definition for DAC_DOR2 register *******************/
+#define DAC_DOR2_DACC2DOR ((uint16_t)0x0FFF) /*!< DAC channel2 data output */
+
+/******************** Bit definition for DAC_SR register ********************/
+#define DAC_SR_DMAUDR1 ((uint32_t)0x00002000) /*!< DAC channel1 DMA underrun flag */
+#define DAC_SR_DMAUDR2 ((uint32_t)0x20000000) /*!< DAC channel2 DMA underrun flag */
+
+/******************************************************************************/
+/* */
+/* Debug MCU (DBGMCU) */
+/* */
+/******************************************************************************/
+/******************** Bit definition for DBGMCU_IDCODE register *************/
+#define DBGMCU_IDCODE_DEV_ID ((uint32_t)0x00000FFF)
+#define DBGMCU_IDCODE_REV_ID ((uint32_t)0xFFFF0000)
+
+/******************** Bit definition for DBGMCU_CR register *****************/
+#define DBGMCU_CR_DBG_SLEEP ((uint32_t)0x00000001)
+#define DBGMCU_CR_DBG_STOP ((uint32_t)0x00000002)
+#define DBGMCU_CR_DBG_STANDBY ((uint32_t)0x00000004)
+#define DBGMCU_CR_TRACE_IOEN ((uint32_t)0x00000020)
+
+#define DBGMCU_CR_TRACE_MODE ((uint32_t)0x000000C0)
+#define DBGMCU_CR_TRACE_MODE_0 ((uint32_t)0x00000040)/*!<Bit 0 */
+#define DBGMCU_CR_TRACE_MODE_1 ((uint32_t)0x00000080)/*!<Bit 1 */
+
+/******************** Bit definition for DBGMCU_APB1_FZ register ************/
+#define DBGMCU_APB1_FZ_DBG_TIM2_STOP ((uint32_t)0x00000001)
+#define DBGMCU_APB1_FZ_DBG_TIM3_STOP ((uint32_t)0x00000002)
+#define DBGMCU_APB1_FZ_DBG_TIM4_STOP ((uint32_t)0x00000004)
+#define DBGMCU_APB1_FZ_DBG_TIM6_STOP ((uint32_t)0x00000010)
+#define DBGMCU_APB1_FZ_DBG_TIM7_STOP ((uint32_t)0x00000020)
+#define DBGMCU_APB1_FZ_DBG_RTC_STOP ((uint32_t)0x00000400)
+#define DBGMCU_APB1_FZ_DBG_WWDG_STOP ((uint32_t)0x00000800)
+#define DBGMCU_APB1_FZ_DBG_IWDG_STOP ((uint32_t)0x00001000)
+#define DBGMCU_APB1_FZ_DBG_I2C1_SMBUS_TIMEOUT ((uint32_t)0x00200000)
+#define DBGMCU_APB1_FZ_DBG_I2C2_SMBUS_TIMEOUT ((uint32_t)0x00400000)
+#define DBGMCU_APB1_FZ_DBG_CAN1_STOP ((uint32_t)0x02000000)
+
+/******************** Bit definition for DBGMCU_APB2_FZ register ************/
+#define DBGMCU_APB2_FZ_DBG_TIM1_STOP ((uint32_t)0x00000001)
+#define DBGMCU_APB2_FZ_DBG_TIM8_STOP ((uint32_t)0x00000002)
+#define DBGMCU_APB2_FZ_DBG_TIM15_STOP ((uint32_t)0x00000004)
+#define DBGMCU_APB2_FZ_DBG_TIM16_STOP ((uint32_t)0x00000008)
+#define DBGMCU_APB2_FZ_DBG_TIM17_STOP ((uint32_t)0x00000010)
+
+/******************************************************************************/
+/* */
+/* DMA Controller (DMA) */
+/* */
+/******************************************************************************/
+/******************* Bit definition for DMA_ISR register ********************/
+#define DMA_ISR_GIF1 ((uint32_t)0x00000001) /*!< Channel 1 Global interrupt flag */
+#define DMA_ISR_TCIF1 ((uint32_t)0x00000002) /*!< Channel 1 Transfer Complete flag */
+#define DMA_ISR_HTIF1 ((uint32_t)0x00000004) /*!< Channel 1 Half Transfer flag */
+#define DMA_ISR_TEIF1 ((uint32_t)0x00000008) /*!< Channel 1 Transfer Error flag */
+#define DMA_ISR_GIF2 ((uint32_t)0x00000010) /*!< Channel 2 Global interrupt flag */
+#define DMA_ISR_TCIF2 ((uint32_t)0x00000020) /*!< Channel 2 Transfer Complete flag */
+#define DMA_ISR_HTIF2 ((uint32_t)0x00000040) /*!< Channel 2 Half Transfer flag */
+#define DMA_ISR_TEIF2 ((uint32_t)0x00000080) /*!< Channel 2 Transfer Error flag */
+#define DMA_ISR_GIF3 ((uint32_t)0x00000100) /*!< Channel 3 Global interrupt flag */
+#define DMA_ISR_TCIF3 ((uint32_t)0x00000200) /*!< Channel 3 Transfer Complete flag */
+#define DMA_ISR_HTIF3 ((uint32_t)0x00000400) /*!< Channel 3 Half Transfer flag */
+#define DMA_ISR_TEIF3 ((uint32_t)0x00000800) /*!< Channel 3 Transfer Error flag */
+#define DMA_ISR_GIF4 ((uint32_t)0x00001000) /*!< Channel 4 Global interrupt flag */
+#define DMA_ISR_TCIF4 ((uint32_t)0x00002000) /*!< Channel 4 Transfer Complete flag */
+#define DMA_ISR_HTIF4 ((uint32_t)0x00004000) /*!< Channel 4 Half Transfer flag */
+#define DMA_ISR_TEIF4 ((uint32_t)0x00008000) /*!< Channel 4 Transfer Error flag */
+#define DMA_ISR_GIF5 ((uint32_t)0x00010000) /*!< Channel 5 Global interrupt flag */
+#define DMA_ISR_TCIF5 ((uint32_t)0x00020000) /*!< Channel 5 Transfer Complete flag */
+#define DMA_ISR_HTIF5 ((uint32_t)0x00040000) /*!< Channel 5 Half Transfer flag */
+#define DMA_ISR_TEIF5 ((uint32_t)0x00080000) /*!< Channel 5 Transfer Error flag */
+#define DMA_ISR_GIF6 ((uint32_t)0x00100000) /*!< Channel 6 Global interrupt flag */
+#define DMA_ISR_TCIF6 ((uint32_t)0x00200000) /*!< Channel 6 Transfer Complete flag */
+#define DMA_ISR_HTIF6 ((uint32_t)0x00400000) /*!< Channel 6 Half Transfer flag */
+#define DMA_ISR_TEIF6 ((uint32_t)0x00800000) /*!< Channel 6 Transfer Error flag */
+#define DMA_ISR_GIF7 ((uint32_t)0x01000000) /*!< Channel 7 Global interrupt flag */
+#define DMA_ISR_TCIF7 ((uint32_t)0x02000000) /*!< Channel 7 Transfer Complete flag */
+#define DMA_ISR_HTIF7 ((uint32_t)0x04000000) /*!< Channel 7 Half Transfer flag */
+#define DMA_ISR_TEIF7 ((uint32_t)0x08000000) /*!< Channel 7 Transfer Error flag */
+
+/******************* Bit definition for DMA_IFCR register *******************/
+#define DMA_IFCR_CGIF1 ((uint32_t)0x00000001) /*!< Channel 1 Global interrupt clear */
+#define DMA_IFCR_CTCIF1 ((uint32_t)0x00000002) /*!< Channel 1 Transfer Complete clear */
+#define DMA_IFCR_CHTIF1 ((uint32_t)0x00000004) /*!< Channel 1 Half Transfer clear */
+#define DMA_IFCR_CTEIF1 ((uint32_t)0x00000008) /*!< Channel 1 Transfer Error clear */
+#define DMA_IFCR_CGIF2 ((uint32_t)0x00000010) /*!< Channel 2 Global interrupt clear */
+#define DMA_IFCR_CTCIF2 ((uint32_t)0x00000020) /*!< Channel 2 Transfer Complete clear */
+#define DMA_IFCR_CHTIF2 ((uint32_t)0x00000040) /*!< Channel 2 Half Transfer clear */
+#define DMA_IFCR_CTEIF2 ((uint32_t)0x00000080) /*!< Channel 2 Transfer Error clear */
+#define DMA_IFCR_CGIF3 ((uint32_t)0x00000100) /*!< Channel 3 Global interrupt clear */
+#define DMA_IFCR_CTCIF3 ((uint32_t)0x00000200) /*!< Channel 3 Transfer Complete clear */
+#define DMA_IFCR_CHTIF3 ((uint32_t)0x00000400) /*!< Channel 3 Half Transfer clear */
+#define DMA_IFCR_CTEIF3 ((uint32_t)0x00000800) /*!< Channel 3 Transfer Error clear */
+#define DMA_IFCR_CGIF4 ((uint32_t)0x00001000) /*!< Channel 4 Global interrupt clear */
+#define DMA_IFCR_CTCIF4 ((uint32_t)0x00002000) /*!< Channel 4 Transfer Complete clear */
+#define DMA_IFCR_CHTIF4 ((uint32_t)0x00004000) /*!< Channel 4 Half Transfer clear */
+#define DMA_IFCR_CTEIF4 ((uint32_t)0x00008000) /*!< Channel 4 Transfer Error clear */
+#define DMA_IFCR_CGIF5 ((uint32_t)0x00010000) /*!< Channel 5 Global interrupt clear */
+#define DMA_IFCR_CTCIF5 ((uint32_t)0x00020000) /*!< Channel 5 Transfer Complete clear */
+#define DMA_IFCR_CHTIF5 ((uint32_t)0x00040000) /*!< Channel 5 Half Transfer clear */
+#define DMA_IFCR_CTEIF5 ((uint32_t)0x00080000) /*!< Channel 5 Transfer Error clear */
+#define DMA_IFCR_CGIF6 ((uint32_t)0x00100000) /*!< Channel 6 Global interrupt clear */
+#define DMA_IFCR_CTCIF6 ((uint32_t)0x00200000) /*!< Channel 6 Transfer Complete clear */
+#define DMA_IFCR_CHTIF6 ((uint32_t)0x00400000) /*!< Channel 6 Half Transfer clear */
+#define DMA_IFCR_CTEIF6 ((uint32_t)0x00800000) /*!< Channel 6 Transfer Error clear */
+#define DMA_IFCR_CGIF7 ((uint32_t)0x01000000) /*!< Channel 7 Global interrupt clear */
+#define DMA_IFCR_CTCIF7 ((uint32_t)0x02000000) /*!< Channel 7 Transfer Complete clear */
+#define DMA_IFCR_CHTIF7 ((uint32_t)0x04000000) /*!< Channel 7 Half Transfer clear */
+#define DMA_IFCR_CTEIF7 ((uint32_t)0x08000000) /*!< Channel 7 Transfer Error clear */
+
+/******************* Bit definition for DMA_CCR register ********************/
+#define DMA_CCR_EN ((uint32_t)0x00000001) /*!< Channel enable */
+#define DMA_CCR_TCIE ((uint32_t)0x00000002) /*!< Transfer complete interrupt enable */
+#define DMA_CCR_HTIE ((uint32_t)0x00000004) /*!< Half Transfer interrupt enable */
+#define DMA_CCR_TEIE ((uint32_t)0x00000008) /*!< Transfer error interrupt enable */
+#define DMA_CCR_DIR ((uint32_t)0x00000010) /*!< Data transfer direction */
+#define DMA_CCR_CIRC ((uint32_t)0x00000020) /*!< Circular mode */
+#define DMA_CCR_PINC ((uint32_t)0x00000040) /*!< Peripheral increment mode */
+#define DMA_CCR_MINC ((uint32_t)0x00000080) /*!< Memory increment mode */
+
+#define DMA_CCR_PSIZE ((uint32_t)0x00000300) /*!< PSIZE[1:0] bits (Peripheral size) */
+#define DMA_CCR_PSIZE_0 ((uint32_t)0x00000100) /*!< Bit 0 */
+#define DMA_CCR_PSIZE_1 ((uint32_t)0x00000200) /*!< Bit 1 */
+
+#define DMA_CCR_MSIZE ((uint32_t)0x00000C00) /*!< MSIZE[1:0] bits (Memory size) */
+#define DMA_CCR_MSIZE_0 ((uint32_t)0x00000400) /*!< Bit 0 */
+#define DMA_CCR_MSIZE_1 ((uint32_t)0x00000800) /*!< Bit 1 */
+
+#define DMA_CCR_PL ((uint32_t)0x00003000) /*!< PL[1:0] bits(Channel Priority level)*/
+#define DMA_CCR_PL_0 ((uint32_t)0x00001000) /*!< Bit 0 */
+#define DMA_CCR_PL_1 ((uint32_t)0x00002000) /*!< Bit 1 */
+
+#define DMA_CCR_MEM2MEM ((uint32_t)0x00004000) /*!< Memory to memory mode */
+
+/****************** Bit definition for DMA_CNDTR register *******************/
+#define DMA_CNDTR_NDT ((uint32_t)0x0000FFFF) /*!< Number of data to Transfer */
+
+/****************** Bit definition for DMA_CPAR register ********************/
+#define DMA_CPAR_PA ((uint32_t)0xFFFFFFFF) /*!< Peripheral Address */
+
+/****************** Bit definition for DMA_CMAR register ********************/
+#define DMA_CMAR_MA ((uint32_t)0xFFFFFFFF) /*!< Memory Address */
+
+/******************************************************************************/
+/* */
+/* External Interrupt/Event Controller (EXTI) */
+/* */
+/******************************************************************************/
+/******************* Bit definition for EXTI_IMR register *******************/
+#define EXTI_IMR_MR0 ((uint32_t)0x00000001) /*!< Interrupt Mask on line 0 */
+#define EXTI_IMR_MR1 ((uint32_t)0x00000002) /*!< Interrupt Mask on line 1 */
+#define EXTI_IMR_MR2 ((uint32_t)0x00000004) /*!< Interrupt Mask on line 2 */
+#define EXTI_IMR_MR3 ((uint32_t)0x00000008) /*!< Interrupt Mask on line 3 */
+#define EXTI_IMR_MR4 ((uint32_t)0x00000010) /*!< Interrupt Mask on line 4 */
+#define EXTI_IMR_MR5 ((uint32_t)0x00000020) /*!< Interrupt Mask on line 5 */
+#define EXTI_IMR_MR6 ((uint32_t)0x00000040) /*!< Interrupt Mask on line 6 */
+#define EXTI_IMR_MR7 ((uint32_t)0x00000080) /*!< Interrupt Mask on line 7 */
+#define EXTI_IMR_MR8 ((uint32_t)0x00000100) /*!< Interrupt Mask on line 8 */
+#define EXTI_IMR_MR9 ((uint32_t)0x00000200) /*!< Interrupt Mask on line 9 */
+#define EXTI_IMR_MR10 ((uint32_t)0x00000400) /*!< Interrupt Mask on line 10 */
+#define EXTI_IMR_MR11 ((uint32_t)0x00000800) /*!< Interrupt Mask on line 11 */
+#define EXTI_IMR_MR12 ((uint32_t)0x00001000) /*!< Interrupt Mask on line 12 */
+#define EXTI_IMR_MR13 ((uint32_t)0x00002000) /*!< Interrupt Mask on line 13 */
+#define EXTI_IMR_MR14 ((uint32_t)0x00004000) /*!< Interrupt Mask on line 14 */
+#define EXTI_IMR_MR15 ((uint32_t)0x00008000) /*!< Interrupt Mask on line 15 */
+#define EXTI_IMR_MR16 ((uint32_t)0x00010000) /*!< Interrupt Mask on line 16 */
+#define EXTI_IMR_MR17 ((uint32_t)0x00020000) /*!< Interrupt Mask on line 17 */
+#define EXTI_IMR_MR18 ((uint32_t)0x00040000) /*!< Interrupt Mask on line 18 */
+#define EXTI_IMR_MR19 ((uint32_t)0x00080000) /*!< Interrupt Mask on line 19 */
+#define EXTI_IMR_MR20 ((uint32_t)0x00100000) /*!< Interrupt Mask on line 20 */
+#define EXTI_IMR_MR21 ((uint32_t)0x00200000) /*!< Interrupt Mask on line 21 */
+#define EXTI_IMR_MR22 ((uint32_t)0x00400000) /*!< Interrupt Mask on line 22 */
+#define EXTI_IMR_MR23 ((uint32_t)0x00800000) /*!< Interrupt Mask on line 23 */
+#define EXTI_IMR_MR24 ((uint32_t)0x01000000) /*!< Interrupt Mask on line 24 */
+#define EXTI_IMR_MR25 ((uint32_t)0x02000000) /*!< Interrupt Mask on line 25 */
+#define EXTI_IMR_MR26 ((uint32_t)0x04000000) /*!< Interrupt Mask on line 26 */
+#define EXTI_IMR_MR27 ((uint32_t)0x08000000) /*!< Interrupt Mask on line 27 */
+#define EXTI_IMR_MR28 ((uint32_t)0x10000000) /*!< Interrupt Mask on line 28 */
+
+/******************* Bit definition for EXTI_EMR register *******************/
+#define EXTI_EMR_MR0 ((uint32_t)0x00000001) /*!< Event Mask on line 0 */
+#define EXTI_EMR_MR1 ((uint32_t)0x00000002) /*!< Event Mask on line 1 */
+#define EXTI_EMR_MR2 ((uint32_t)0x00000004) /*!< Event Mask on line 2 */
+#define EXTI_EMR_MR3 ((uint32_t)0x00000008) /*!< Event Mask on line 3 */
+#define EXTI_EMR_MR4 ((uint32_t)0x00000010) /*!< Event Mask on line 4 */
+#define EXTI_EMR_MR5 ((uint32_t)0x00000020) /*!< Event Mask on line 5 */
+#define EXTI_EMR_MR6 ((uint32_t)0x00000040) /*!< Event Mask on line 6 */
+#define EXTI_EMR_MR7 ((uint32_t)0x00000080) /*!< Event Mask on line 7 */
+#define EXTI_EMR_MR8 ((uint32_t)0x00000100) /*!< Event Mask on line 8 */
+#define EXTI_EMR_MR9 ((uint32_t)0x00000200) /*!< Event Mask on line 9 */
+#define EXTI_EMR_MR10 ((uint32_t)0x00000400) /*!< Event Mask on line 10 */
+#define EXTI_EMR_MR11 ((uint32_t)0x00000800) /*!< Event Mask on line 11 */
+#define EXTI_EMR_MR12 ((uint32_t)0x00001000) /*!< Event Mask on line 12 */
+#define EXTI_EMR_MR13 ((uint32_t)0x00002000) /*!< Event Mask on line 13 */
+#define EXTI_EMR_MR14 ((uint32_t)0x00004000) /*!< Event Mask on line 14 */
+#define EXTI_EMR_MR15 ((uint32_t)0x00008000) /*!< Event Mask on line 15 */
+#define EXTI_EMR_MR16 ((uint32_t)0x00010000) /*!< Event Mask on line 16 */
+#define EXTI_EMR_MR17 ((uint32_t)0x00020000) /*!< Event Mask on line 17 */
+#define EXTI_EMR_MR18 ((uint32_t)0x00040000) /*!< Event Mask on line 18 */
+#define EXTI_EMR_MR19 ((uint32_t)0x00080000) /*!< Event Mask on line 19 */
+#define EXTI_EMR_MR20 ((uint32_t)0x00100000) /*!< Event Mask on line 20 */
+#define EXTI_EMR_MR21 ((uint32_t)0x00200000) /*!< Event Mask on line 21 */
+#define EXTI_EMR_MR22 ((uint32_t)0x00400000) /*!< Event Mask on line 22 */
+#define EXTI_EMR_MR23 ((uint32_t)0x00800000) /*!< Event Mask on line 23 */
+#define EXTI_EMR_MR24 ((uint32_t)0x01000000) /*!< Event Mask on line 24 */
+#define EXTI_EMR_MR25 ((uint32_t)0x02000000) /*!< Event Mask on line 25 */
+#define EXTI_EMR_MR26 ((uint32_t)0x04000000) /*!< Event Mask on line 26 */
+#define EXTI_EMR_MR27 ((uint32_t)0x08000000) /*!< Event Mask on line 27 */
+#define EXTI_EMR_MR28 ((uint32_t)0x10000000) /*!< Event Mask on line 28 */
+
+/****************** Bit definition for EXTI_RTSR register *******************/
+#define EXTI_RTSR_TR0 ((uint32_t)0x00000001) /*!< Rising trigger event configuration bit of line 0 */
+#define EXTI_RTSR_TR1 ((uint32_t)0x00000002) /*!< Rising trigger event configuration bit of line 1 */
+#define EXTI_RTSR_TR2 ((uint32_t)0x00000004) /*!< Rising trigger event configuration bit of line 2 */
+#define EXTI_RTSR_TR3 ((uint32_t)0x00000008) /*!< Rising trigger event configuration bit of line 3 */
+#define EXTI_RTSR_TR4 ((uint32_t)0x00000010) /*!< Rising trigger event configuration bit of line 4 */
+#define EXTI_RTSR_TR5 ((uint32_t)0x00000020) /*!< Rising trigger event configuration bit of line 5 */
+#define EXTI_RTSR_TR6 ((uint32_t)0x00000040) /*!< Rising trigger event configuration bit of line 6 */
+#define EXTI_RTSR_TR7 ((uint32_t)0x00000080) /*!< Rising trigger event configuration bit of line 7 */
+#define EXTI_RTSR_TR8 ((uint32_t)0x00000100) /*!< Rising trigger event configuration bit of line 8 */
+#define EXTI_RTSR_TR9 ((uint32_t)0x00000200) /*!< Rising trigger event configuration bit of line 9 */
+#define EXTI_RTSR_TR10 ((uint32_t)0x00000400) /*!< Rising trigger event configuration bit of line 10 */
+#define EXTI_RTSR_TR11 ((uint32_t)0x00000800) /*!< Rising trigger event configuration bit of line 11 */
+#define EXTI_RTSR_TR12 ((uint32_t)0x00001000) /*!< Rising trigger event configuration bit of line 12 */
+#define EXTI_RTSR_TR13 ((uint32_t)0x00002000) /*!< Rising trigger event configuration bit of line 13 */
+#define EXTI_RTSR_TR14 ((uint32_t)0x00004000) /*!< Rising trigger event configuration bit of line 14 */
+#define EXTI_RTSR_TR15 ((uint32_t)0x00008000) /*!< Rising trigger event configuration bit of line 15 */
+#define EXTI_RTSR_TR16 ((uint32_t)0x00010000) /*!< Rising trigger event configuration bit of line 16 */
+#define EXTI_RTSR_TR17 ((uint32_t)0x00020000) /*!< Rising trigger event configuration bit of line 17 */
+#define EXTI_RTSR_TR18 ((uint32_t)0x00040000) /*!< Rising trigger event configuration bit of line 18 */
+#define EXTI_RTSR_TR19 ((uint32_t)0x00080000) /*!< Rising trigger event configuration bit of line 19 */
+#define EXTI_RTSR_TR20 ((uint32_t)0x00100000) /*!< Rising trigger event configuration bit of line 20 */
+#define EXTI_RTSR_TR21 ((uint32_t)0x00200000) /*!< Rising trigger event configuration bit of line 21 */
+#define EXTI_RTSR_TR22 ((uint32_t)0x00400000) /*!< Rising trigger event configuration bit of line 22 */
+#define EXTI_RTSR_TR23 ((uint32_t)0x00800000) /*!< Rising trigger event configuration bit of line 23 */
+#define EXTI_RTSR_TR24 ((uint32_t)0x01000000) /*!< Rising trigger event configuration bit of line 24 */
+#define EXTI_RTSR_TR25 ((uint32_t)0x02000000) /*!< Rising trigger event configuration bit of line 25 */
+#define EXTI_RTSR_TR26 ((uint32_t)0x04000000) /*!< Rising trigger event configuration bit of line 26 */
+#define EXTI_RTSR_TR27 ((uint32_t)0x08000000) /*!< Rising trigger event configuration bit of line 27 */
+#define EXTI_RTSR_TR28 ((uint32_t)0x10000000) /*!< Rising trigger event configuration bit of line 28 */
+
+/****************** Bit definition for EXTI_FTSR register *******************/
+#define EXTI_FTSR_TR0 ((uint32_t)0x00000001) /*!< Falling trigger event configuration bit of line 0 */
+#define EXTI_FTSR_TR1 ((uint32_t)0x00000002) /*!< Falling trigger event configuration bit of line 1 */
+#define EXTI_FTSR_TR2 ((uint32_t)0x00000004) /*!< Falling trigger event configuration bit of line 2 */
+#define EXTI_FTSR_TR3 ((uint32_t)0x00000008) /*!< Falling trigger event configuration bit of line 3 */
+#define EXTI_FTSR_TR4 ((uint32_t)0x00000010) /*!< Falling trigger event configuration bit of line 4 */
+#define EXTI_FTSR_TR5 ((uint32_t)0x00000020) /*!< Falling trigger event configuration bit of line 5 */
+#define EXTI_FTSR_TR6 ((uint32_t)0x00000040) /*!< Falling trigger event configuration bit of line 6 */
+#define EXTI_FTSR_TR7 ((uint32_t)0x00000080) /*!< Falling trigger event configuration bit of line 7 */
+#define EXTI_FTSR_TR8 ((uint32_t)0x00000100) /*!< Falling trigger event configuration bit of line 8 */
+#define EXTI_FTSR_TR9 ((uint32_t)0x00000200) /*!< Falling trigger event configuration bit of line 9 */
+#define EXTI_FTSR_TR10 ((uint32_t)0x00000400) /*!< Falling trigger event configuration bit of line 10 */
+#define EXTI_FTSR_TR11 ((uint32_t)0x00000800) /*!< Falling trigger event configuration bit of line 11 */
+#define EXTI_FTSR_TR12 ((uint32_t)0x00001000) /*!< Falling trigger event configuration bit of line 12 */
+#define EXTI_FTSR_TR13 ((uint32_t)0x00002000) /*!< Falling trigger event configuration bit of line 13 */
+#define EXTI_FTSR_TR14 ((uint32_t)0x00004000) /*!< Falling trigger event configuration bit of line 14 */
+#define EXTI_FTSR_TR15 ((uint32_t)0x00008000) /*!< Falling trigger event configuration bit of line 15 */
+#define EXTI_FTSR_TR16 ((uint32_t)0x00010000) /*!< Falling trigger event configuration bit of line 16 */
+#define EXTI_FTSR_TR17 ((uint32_t)0x00020000) /*!< Falling trigger event configuration bit of line 17 */
+#define EXTI_FTSR_TR18 ((uint32_t)0x00040000) /*!< Falling trigger event configuration bit of line 18 */
+#define EXTI_FTSR_TR19 ((uint32_t)0x00080000) /*!< Falling trigger event configuration bit of line 19 */
+#define EXTI_FTSR_TR20 ((uint32_t)0x00100000) /*!< Falling trigger event configuration bit of line 20 */
+#define EXTI_FTSR_TR21 ((uint32_t)0x00200000) /*!< Falling trigger event configuration bit of line 21 */
+#define EXTI_FTSR_TR22 ((uint32_t)0x00400000) /*!< Falling trigger event configuration bit of line 22 */
+#define EXTI_FTSR_TR23 ((uint32_t)0x00800000) /*!< Falling trigger event configuration bit of line 23 */
+#define EXTI_FTSR_TR24 ((uint32_t)0x01000000) /*!< Falling trigger event configuration bit of line 24 */
+#define EXTI_FTSR_TR25 ((uint32_t)0x02000000) /*!< Falling trigger event configuration bit of line 25 */
+#define EXTI_FTSR_TR26 ((uint32_t)0x04000000) /*!< Falling trigger event configuration bit of line 26 */
+#define EXTI_FTSR_TR27 ((uint32_t)0x08000000) /*!< Falling trigger event configuration bit of line 27 */
+#define EXTI_FTSR_TR28 ((uint32_t)0x10000000) /*!< Falling trigger event configuration bit of line 28 */
+
+/****************** Bit definition for EXTI_SWIER register ******************/
+#define EXTI_SWIER_SWIER0 ((uint32_t)0x00000001) /*!< Software Interrupt on line 0 */
+#define EXTI_SWIER_SWIER1 ((uint32_t)0x00000002) /*!< Software Interrupt on line 1 */
+#define EXTI_SWIER_SWIER2 ((uint32_t)0x00000004) /*!< Software Interrupt on line 2 */
+#define EXTI_SWIER_SWIER3 ((uint32_t)0x00000008) /*!< Software Interrupt on line 3 */
+#define EXTI_SWIER_SWIER4 ((uint32_t)0x00000010) /*!< Software Interrupt on line 4 */
+#define EXTI_SWIER_SWIER5 ((uint32_t)0x00000020) /*!< Software Interrupt on line 5 */
+#define EXTI_SWIER_SWIER6 ((uint32_t)0x00000040) /*!< Software Interrupt on line 6 */
+#define EXTI_SWIER_SWIER7 ((uint32_t)0x00000080) /*!< Software Interrupt on line 7 */
+#define EXTI_SWIER_SWIER8 ((uint32_t)0x00000100) /*!< Software Interrupt on line 8 */
+#define EXTI_SWIER_SWIER9 ((uint32_t)0x00000200) /*!< Software Interrupt on line 9 */
+#define EXTI_SWIER_SWIER10 ((uint32_t)0x00000400) /*!< Software Interrupt on line 10 */
+#define EXTI_SWIER_SWIER11 ((uint32_t)0x00000800) /*!< Software Interrupt on line 11 */
+#define EXTI_SWIER_SWIER12 ((uint32_t)0x00001000) /*!< Software Interrupt on line 12 */
+#define EXTI_SWIER_SWIER13 ((uint32_t)0x00002000) /*!< Software Interrupt on line 13 */
+#define EXTI_SWIER_SWIER14 ((uint32_t)0x00004000) /*!< Software Interrupt on line 14 */
+#define EXTI_SWIER_SWIER15 ((uint32_t)0x00008000) /*!< Software Interrupt on line 15 */
+#define EXTI_SWIER_SWIER16 ((uint32_t)0x00010000) /*!< Software Interrupt on line 16 */
+#define EXTI_SWIER_SWIER17 ((uint32_t)0x00020000) /*!< Software Interrupt on line 17 */
+#define EXTI_SWIER_SWIER18 ((uint32_t)0x00040000) /*!< Software Interrupt on line 18 */
+#define EXTI_SWIER_SWIER19 ((uint32_t)0x00080000) /*!< Software Interrupt on line 19 */
+#define EXTI_SWIER_SWIER20 ((uint32_t)0x00100000) /*!< Software Interrupt on line 20 */
+#define EXTI_SWIER_SWIER21 ((uint32_t)0x00200000) /*!< Software Interrupt on line 21 */
+#define EXTI_SWIER_SWIER22 ((uint32_t)0x00400000) /*!< Software Interrupt on line 22 */
+#define EXTI_SWIER_SWIER23 ((uint32_t)0x00800000) /*!< Software Interrupt on line 23 */
+#define EXTI_SWIER_SWIER24 ((uint32_t)0x01000000) /*!< Software Interrupt on line 24 */
+#define EXTI_SWIER_SWIER25 ((uint32_t)0x02000000) /*!< Software Interrupt on line 25 */
+#define EXTI_SWIER_SWIER26 ((uint32_t)0x04000000) /*!< Software Interrupt on line 26 */
+#define EXTI_SWIER_SWIER27 ((uint32_t)0x08000000) /*!< Software Interrupt on line 27 */
+#define EXTI_SWIER_SWIER28 ((uint32_t)0x10000000) /*!< Software Interrupt on line 28 */
+
+/******************* Bit definition for EXTI_PR register ********************/
+#define EXTI_PR_PR0 ((uint32_t)0x00000001) /*!< Pending bit for line 0 */
+#define EXTI_PR_PR1 ((uint32_t)0x00000002) /*!< Pending bit for line 1 */
+#define EXTI_PR_PR2 ((uint32_t)0x00000004) /*!< Pending bit for line 2 */
+#define EXTI_PR_PR3 ((uint32_t)0x00000008) /*!< Pending bit for line 3 */
+#define EXTI_PR_PR4 ((uint32_t)0x00000010) /*!< Pending bit for line 4 */
+#define EXTI_PR_PR5 ((uint32_t)0x00000020) /*!< Pending bit for line 5 */
+#define EXTI_PR_PR6 ((uint32_t)0x00000040) /*!< Pending bit for line 6 */
+#define EXTI_PR_PR7 ((uint32_t)0x00000080) /*!< Pending bit for line 7 */
+#define EXTI_PR_PR8 ((uint32_t)0x00000100) /*!< Pending bit for line 8 */
+#define EXTI_PR_PR9 ((uint32_t)0x00000200) /*!< Pending bit for line 9 */
+#define EXTI_PR_PR10 ((uint32_t)0x00000400) /*!< Pending bit for line 10 */
+#define EXTI_PR_PR11 ((uint32_t)0x00000800) /*!< Pending bit for line 11 */
+#define EXTI_PR_PR12 ((uint32_t)0x00001000) /*!< Pending bit for line 12 */
+#define EXTI_PR_PR13 ((uint32_t)0x00002000) /*!< Pending bit for line 13 */
+#define EXTI_PR_PR14 ((uint32_t)0x00004000) /*!< Pending bit for line 14 */
+#define EXTI_PR_PR15 ((uint32_t)0x00008000) /*!< Pending bit for line 15 */
+#define EXTI_PR_PR16 ((uint32_t)0x00010000) /*!< Pending bit for line 16 */
+#define EXTI_PR_PR17 ((uint32_t)0x00020000) /*!< Pending bit for line 17 */
+#define EXTI_PR_PR18 ((uint32_t)0x00040000) /*!< Pending bit for line 18 */
+#define EXTI_PR_PR19 ((uint32_t)0x00080000) /*!< Pending bit for line 19 */
+#define EXTI_PR_PR20 ((uint32_t)0x00100000) /*!< Pending bit for line 20 */
+#define EXTI_PR_PR21 ((uint32_t)0x00200000) /*!< Pending bit for line 21 */
+#define EXTI_PR_PR22 ((uint32_t)0x00400000) /*!< Pending bit for line 22 */
+#define EXTI_PR_PR23 ((uint32_t)0x00800000) /*!< Pending bit for line 23 */
+#define EXTI_PR_PR24 ((uint32_t)0x01000000) /*!< Pending bit for line 24 */
+#define EXTI_PR_PR25 ((uint32_t)0x02000000) /*!< Pending bit for line 25 */
+#define EXTI_PR_PR26 ((uint32_t)0x04000000) /*!< Pending bit for line 26 */
+#define EXTI_PR_PR27 ((uint32_t)0x08000000) /*!< Pending bit for line 27 */
+#define EXTI_PR_PR28 ((uint32_t)0x10000000) /*!< Pending bit for line 28 */
+
+/******************************************************************************/
+/* */
+/* FLASH */
+/* */
+/******************************************************************************/
+/******************* Bit definition for FLASH_ACR register ******************/
+#define FLASH_ACR_LATENCY ((uint8_t)0x03) /*!< LATENCY[2:0] bits (Latency) */
+#define FLASH_ACR_LATENCY_0 ((uint8_t)0x01) /*!< Bit 0 */
+#define FLASH_ACR_LATENCY_1 ((uint8_t)0x02) /*!< Bit 1 */
+
+#define FLASH_ACR_HLFCYA ((uint8_t)0x08) /*!< Flash Half Cycle Access Enable */
+#define FLASH_ACR_PRFTBE ((uint8_t)0x10) /*!< Prefetch Buffer Enable */
+#define FLASH_ACR_PRFTBS ((uint8_t)0x20)
+
+/****************** Bit definition for FLASH_KEYR register ******************/
+#define FLASH_KEYR_FKEYR ((uint32_t)0xFFFFFFFF) /*!< FPEC Key */
+
+#define RDP_KEY ((uint16_t)0x00A5) /*!< RDP Key */
+#define FLASH_KEY1 ((uint32_t)0x45670123) /*!< FPEC Key1 */
+#define FLASH_KEY2 ((uint32_t)0xCDEF89AB) /*!< FPEC Key2 */
+
+/***************** Bit definition for FLASH_OPTKEYR register ****************/
+#define FLASH_OPTKEYR_OPTKEYR ((uint32_t)0xFFFFFFFF) /*!< Option Byte Key */
+
+#define FLASH_OPTKEY1 FLASH_KEY1 /*!< Option Byte Key1 */
+#define FLASH_OPTKEY2 FLASH_KEY2 /*!< Option Byte Key2 */
+
+/****************** Bit definition for FLASH_SR register *******************/
+#define FLASH_SR_BSY ((uint32_t)0x00000001) /*!< Busy */
+#define FLASH_SR_PGERR ((uint32_t)0x00000004) /*!< Programming Error */
+#define FLASH_SR_WRPERR ((uint32_t)0x00000010) /*!< Write Protection Error */
+#define FLASH_SR_EOP ((uint32_t)0x00000020) /*!< End of operation */
+
+/******************* Bit definition for FLASH_CR register *******************/
+#define FLASH_CR_PG ((uint32_t)0x00000001) /*!< Programming */
+#define FLASH_CR_PER ((uint32_t)0x00000002) /*!< Page Erase */
+#define FLASH_CR_MER ((uint32_t)0x00000004) /*!< Mass Erase */
+#define FLASH_CR_OPTPG ((uint32_t)0x00000010) /*!< Option Byte Programming */
+#define FLASH_CR_OPTER ((uint32_t)0x00000020) /*!< Option Byte Erase */
+#define FLASH_CR_STRT ((uint32_t)0x00000040) /*!< Start */
+#define FLASH_CR_LOCK ((uint32_t)0x00000080) /*!< Lock */
+#define FLASH_CR_OPTWRE ((uint32_t)0x00000200) /*!< Option Bytes Write Enable */
+#define FLASH_CR_ERRIE ((uint32_t)0x00000400) /*!< Error Interrupt Enable */
+#define FLASH_CR_EOPIE ((uint32_t)0x00001000) /*!< End of operation interrupt enable */
+#define FLASH_CR_OBL_LAUNCH ((uint32_t)0x00002000) /*!< OptionBytes Loader Launch */
+
+/******************* Bit definition for FLASH_AR register *******************/
+#define FLASH_AR_FAR ((uint32_t)0xFFFFFFFF) /*!< Flash Address */
+
+/****************** Bit definition for FLASH_OBR register *******************/
+#define FLASH_OBR_OPTERR ((uint32_t)0x00000001) /*!< Option Byte Error */
+#define FLASH_OBR_RDPRT1 ((uint32_t)0x00000002) /*!< Read protection Level 1 */
+#define FLASH_OBR_RDPRT2 ((uint32_t)0x00000004) /*!< Read protection Level 2 */
+
+#define FLASH_OBR_USER ((uint32_t)0x00003700) /*!< User Option Bytes */
+#define FLASH_OBR_IWDG_SW ((uint32_t)0x00000100) /*!< IWDG SW */
+#define FLASH_OBR_nRST_STOP ((uint32_t)0x00000200) /*!< nRST_STOP */
+#define FLASH_OBR_nRST_STDBY ((uint32_t)0x00000400) /*!< nRST_STDBY */
+
+/****************** Bit definition for FLASH_WRPR register ******************/
+#define FLASH_WRPR_WRP ((uint32_t)0xFFFFFFFF) /*!< Write Protect */
+
+/*----------------------------------------------------------------------------*/
+
+/****************** Bit definition for OB_RDP register **********************/
+#define OB_RDP_RDP ((uint32_t)0x000000FF) /*!< Read protection option byte */
+#define OB_RDP_nRDP ((uint32_t)0x0000FF00) /*!< Read protection complemented option byte */
+
+/****************** Bit definition for OB_USER register *********************/
+#define OB_USER_USER ((uint32_t)0x00FF0000) /*!< User option byte */
+#define OB_USER_nUSER ((uint32_t)0xFF000000) /*!< User complemented option byte */
+
+/****************** Bit definition for FLASH_WRP0 register ******************/
+#define OB_WRP0_WRP0 ((uint32_t)0x000000FF) /*!< Flash memory write protection option bytes */
+#define OB_WRP0_nWRP0 ((uint32_t)0x0000FF00) /*!< Flash memory write protection complemented option bytes */
+
+/****************** Bit definition for FLASH_WRP1 register ******************/
+#define OB_WRP1_WRP1 ((uint32_t)0x00FF0000) /*!< Flash memory write protection option bytes */
+#define OB_WRP1_nWRP1 ((uint32_t)0xFF000000) /*!< Flash memory write protection complemented option bytes */
+
+/****************** Bit definition for FLASH_WRP2 register ******************/
+#define OB_WRP2_WRP2 ((uint32_t)0x000000FF) /*!< Flash memory write protection option bytes */
+#define OB_WRP2_nWRP2 ((uint32_t)0x0000FF00) /*!< Flash memory write protection complemented option bytes */
+
+/****************** Bit definition for FLASH_WRP3 register ******************/
+#define OB_WRP3_WRP3 ((uint32_t)0x00FF0000) /*!< Flash memory write protection option bytes */
+#define OB_WRP3_nWRP3 ((uint32_t)0xFF000000) /*!< Flash memory write protection complemented option bytes */
+/******************************************************************************/
+/* */
+/* General Purpose I/O (GPIO) */
+/* */
+/******************************************************************************/
+/******************* Bit definition for GPIO_MODER register *****************/
+#define GPIO_MODER_MODER0 ((uint32_t)0x00000003)
+#define GPIO_MODER_MODER0_0 ((uint32_t)0x00000001)
+#define GPIO_MODER_MODER0_1 ((uint32_t)0x00000002)
+#define GPIO_MODER_MODER1 ((uint32_t)0x0000000C)
+#define GPIO_MODER_MODER1_0 ((uint32_t)0x00000004)
+#define GPIO_MODER_MODER1_1 ((uint32_t)0x00000008)
+#define GPIO_MODER_MODER2 ((uint32_t)0x00000030)
+#define GPIO_MODER_MODER2_0 ((uint32_t)0x00000010)
+#define GPIO_MODER_MODER2_1 ((uint32_t)0x00000020)
+#define GPIO_MODER_MODER3 ((uint32_t)0x000000C0)
+#define GPIO_MODER_MODER3_0 ((uint32_t)0x00000040)
+#define GPIO_MODER_MODER3_1 ((uint32_t)0x00000080)
+#define GPIO_MODER_MODER4 ((uint32_t)0x00000300)
+#define GPIO_MODER_MODER4_0 ((uint32_t)0x00000100)
+#define GPIO_MODER_MODER4_1 ((uint32_t)0x00000200)
+#define GPIO_MODER_MODER5 ((uint32_t)0x00000C00)
+#define GPIO_MODER_MODER5_0 ((uint32_t)0x00000400)
+#define GPIO_MODER_MODER5_1 ((uint32_t)0x00000800)
+#define GPIO_MODER_MODER6 ((uint32_t)0x00003000)
+#define GPIO_MODER_MODER6_0 ((uint32_t)0x00001000)
+#define GPIO_MODER_MODER6_1 ((uint32_t)0x00002000)
+#define GPIO_MODER_MODER7 ((uint32_t)0x0000C000)
+#define GPIO_MODER_MODER7_0 ((uint32_t)0x00004000)
+#define GPIO_MODER_MODER7_1 ((uint32_t)0x00008000)
+#define GPIO_MODER_MODER8 ((uint32_t)0x00030000)
+#define GPIO_MODER_MODER8_0 ((uint32_t)0x00010000)
+#define GPIO_MODER_MODER8_1 ((uint32_t)0x00020000)
+#define GPIO_MODER_MODER9 ((uint32_t)0x000C0000)
+#define GPIO_MODER_MODER9_0 ((uint32_t)0x00040000)
+#define GPIO_MODER_MODER9_1 ((uint32_t)0x00080000)
+#define GPIO_MODER_MODER10 ((uint32_t)0x00300000)
+#define GPIO_MODER_MODER10_0 ((uint32_t)0x00100000)
+#define GPIO_MODER_MODER10_1 ((uint32_t)0x00200000)
+#define GPIO_MODER_MODER11 ((uint32_t)0x00C00000)
+#define GPIO_MODER_MODER11_0 ((uint32_t)0x00400000)
+#define GPIO_MODER_MODER11_1 ((uint32_t)0x00800000)
+#define GPIO_MODER_MODER12 ((uint32_t)0x03000000)
+#define GPIO_MODER_MODER12_0 ((uint32_t)0x01000000)
+#define GPIO_MODER_MODER12_1 ((uint32_t)0x02000000)
+#define GPIO_MODER_MODER13 ((uint32_t)0x0C000000)
+#define GPIO_MODER_MODER13_0 ((uint32_t)0x04000000)
+#define GPIO_MODER_MODER13_1 ((uint32_t)0x08000000)
+#define GPIO_MODER_MODER14 ((uint32_t)0x30000000)
+#define GPIO_MODER_MODER14_0 ((uint32_t)0x10000000)
+#define GPIO_MODER_MODER14_1 ((uint32_t)0x20000000)
+#define GPIO_MODER_MODER15 ((uint32_t)0xC0000000)
+#define GPIO_MODER_MODER15_0 ((uint32_t)0x40000000)
+#define GPIO_MODER_MODER15_1 ((uint32_t)0x80000000)
+
+
+/****************** Bit definition for GPIO_OTYPER register *****************/
+#define GPIO_OTYPER_OT_0 ((uint32_t)0x00000001)
+#define GPIO_OTYPER_OT_1 ((uint32_t)0x00000002)
+#define GPIO_OTYPER_OT_2 ((uint32_t)0x00000004)
+#define GPIO_OTYPER_OT_3 ((uint32_t)0x00000008)
+#define GPIO_OTYPER_OT_4 ((uint32_t)0x00000010)
+#define GPIO_OTYPER_OT_5 ((uint32_t)0x00000020)
+#define GPIO_OTYPER_OT_6 ((uint32_t)0x00000040)
+#define GPIO_OTYPER_OT_7 ((uint32_t)0x00000080)
+#define GPIO_OTYPER_OT_8 ((uint32_t)0x00000100)
+#define GPIO_OTYPER_OT_9 ((uint32_t)0x00000200)
+#define GPIO_OTYPER_OT_10 ((uint32_t)0x00000400)
+#define GPIO_OTYPER_OT_11 ((uint32_t)0x00000800)
+#define GPIO_OTYPER_OT_12 ((uint32_t)0x00001000)
+#define GPIO_OTYPER_OT_13 ((uint32_t)0x00002000)
+#define GPIO_OTYPER_OT_14 ((uint32_t)0x00004000)
+#define GPIO_OTYPER_OT_15 ((uint32_t)0x00008000)
+
+
+/**************** Bit definition for GPIO_OSPEEDR register ******************/
+#define GPIO_OSPEEDER_OSPEEDR0 ((uint32_t)0x00000003)
+#define GPIO_OSPEEDER_OSPEEDR0_0 ((uint32_t)0x00000001)
+#define GPIO_OSPEEDER_OSPEEDR0_1 ((uint32_t)0x00000002)
+#define GPIO_OSPEEDER_OSPEEDR1 ((uint32_t)0x0000000C)
+#define GPIO_OSPEEDER_OSPEEDR1_0 ((uint32_t)0x00000004)
+#define GPIO_OSPEEDER_OSPEEDR1_1 ((uint32_t)0x00000008)
+#define GPIO_OSPEEDER_OSPEEDR2 ((uint32_t)0x00000030)
+#define GPIO_OSPEEDER_OSPEEDR2_0 ((uint32_t)0x00000010)
+#define GPIO_OSPEEDER_OSPEEDR2_1 ((uint32_t)0x00000020)
+#define GPIO_OSPEEDER_OSPEEDR3 ((uint32_t)0x000000C0)
+#define GPIO_OSPEEDER_OSPEEDR3_0 ((uint32_t)0x00000040)
+#define GPIO_OSPEEDER_OSPEEDR3_1 ((uint32_t)0x00000080)
+#define GPIO_OSPEEDER_OSPEEDR4 ((uint32_t)0x00000300)
+#define GPIO_OSPEEDER_OSPEEDR4_0 ((uint32_t)0x00000100)
+#define GPIO_OSPEEDER_OSPEEDR4_1 ((uint32_t)0x00000200)
+#define GPIO_OSPEEDER_OSPEEDR5 ((uint32_t)0x00000C00)
+#define GPIO_OSPEEDER_OSPEEDR5_0 ((uint32_t)0x00000400)
+#define GPIO_OSPEEDER_OSPEEDR5_1 ((uint32_t)0x00000800)
+#define GPIO_OSPEEDER_OSPEEDR6 ((uint32_t)0x00003000)
+#define GPIO_OSPEEDER_OSPEEDR6_0 ((uint32_t)0x00001000)
+#define GPIO_OSPEEDER_OSPEEDR6_1 ((uint32_t)0x00002000)
+#define GPIO_OSPEEDER_OSPEEDR7 ((uint32_t)0x0000C000)
+#define GPIO_OSPEEDER_OSPEEDR7_0 ((uint32_t)0x00004000)
+#define GPIO_OSPEEDER_OSPEEDR7_1 ((uint32_t)0x00008000)
+#define GPIO_OSPEEDER_OSPEEDR8 ((uint32_t)0x00030000)
+#define GPIO_OSPEEDER_OSPEEDR8_0 ((uint32_t)0x00010000)
+#define GPIO_OSPEEDER_OSPEEDR8_1 ((uint32_t)0x00020000)
+#define GPIO_OSPEEDER_OSPEEDR9 ((uint32_t)0x000C0000)
+#define GPIO_OSPEEDER_OSPEEDR9_0 ((uint32_t)0x00040000)
+#define GPIO_OSPEEDER_OSPEEDR9_1 ((uint32_t)0x00080000)
+#define GPIO_OSPEEDER_OSPEEDR10 ((uint32_t)0x00300000)
+#define GPIO_OSPEEDER_OSPEEDR10_0 ((uint32_t)0x00100000)
+#define GPIO_OSPEEDER_OSPEEDR10_1 ((uint32_t)0x00200000)
+#define GPIO_OSPEEDER_OSPEEDR11 ((uint32_t)0x00C00000)
+#define GPIO_OSPEEDER_OSPEEDR11_0 ((uint32_t)0x00400000)
+#define GPIO_OSPEEDER_OSPEEDR11_1 ((uint32_t)0x00800000)
+#define GPIO_OSPEEDER_OSPEEDR12 ((uint32_t)0x03000000)
+#define GPIO_OSPEEDER_OSPEEDR12_0 ((uint32_t)0x01000000)
+#define GPIO_OSPEEDER_OSPEEDR12_1 ((uint32_t)0x02000000)
+#define GPIO_OSPEEDER_OSPEEDR13 ((uint32_t)0x0C000000)
+#define GPIO_OSPEEDER_OSPEEDR13_0 ((uint32_t)0x04000000)
+#define GPIO_OSPEEDER_OSPEEDR13_1 ((uint32_t)0x08000000)
+#define GPIO_OSPEEDER_OSPEEDR14 ((uint32_t)0x30000000)
+#define GPIO_OSPEEDER_OSPEEDR14_0 ((uint32_t)0x10000000)
+#define GPIO_OSPEEDER_OSPEEDR14_1 ((uint32_t)0x20000000)
+#define GPIO_OSPEEDER_OSPEEDR15 ((uint32_t)0xC0000000)
+#define GPIO_OSPEEDER_OSPEEDR15_0 ((uint32_t)0x40000000)
+#define GPIO_OSPEEDER_OSPEEDR15_1 ((uint32_t)0x80000000)
+
+/******************* Bit definition for GPIO_PUPDR register ******************/
+#define GPIO_PUPDR_PUPDR0 ((uint32_t)0x00000003)
+#define GPIO_PUPDR_PUPDR0_0 ((uint32_t)0x00000001)
+#define GPIO_PUPDR_PUPDR0_1 ((uint32_t)0x00000002)
+#define GPIO_PUPDR_PUPDR1 ((uint32_t)0x0000000C)
+#define GPIO_PUPDR_PUPDR1_0 ((uint32_t)0x00000004)
+#define GPIO_PUPDR_PUPDR1_1 ((uint32_t)0x00000008)
+#define GPIO_PUPDR_PUPDR2 ((uint32_t)0x00000030)
+#define GPIO_PUPDR_PUPDR2_0 ((uint32_t)0x00000010)
+#define GPIO_PUPDR_PUPDR2_1 ((uint32_t)0x00000020)
+#define GPIO_PUPDR_PUPDR3 ((uint32_t)0x000000C0)
+#define GPIO_PUPDR_PUPDR3_0 ((uint32_t)0x00000040)
+#define GPIO_PUPDR_PUPDR3_1 ((uint32_t)0x00000080)
+#define GPIO_PUPDR_PUPDR4 ((uint32_t)0x00000300)
+#define GPIO_PUPDR_PUPDR4_0 ((uint32_t)0x00000100)
+#define GPIO_PUPDR_PUPDR4_1 ((uint32_t)0x00000200)
+#define GPIO_PUPDR_PUPDR5 ((uint32_t)0x00000C00)
+#define GPIO_PUPDR_PUPDR5_0 ((uint32_t)0x00000400)
+#define GPIO_PUPDR_PUPDR5_1 ((uint32_t)0x00000800)
+#define GPIO_PUPDR_PUPDR6 ((uint32_t)0x00003000)
+#define GPIO_PUPDR_PUPDR6_0 ((uint32_t)0x00001000)
+#define GPIO_PUPDR_PUPDR6_1 ((uint32_t)0x00002000)
+#define GPIO_PUPDR_PUPDR7 ((uint32_t)0x0000C000)
+#define GPIO_PUPDR_PUPDR7_0 ((uint32_t)0x00004000)
+#define GPIO_PUPDR_PUPDR7_1 ((uint32_t)0x00008000)
+#define GPIO_PUPDR_PUPDR8 ((uint32_t)0x00030000)
+#define GPIO_PUPDR_PUPDR8_0 ((uint32_t)0x00010000)
+#define GPIO_PUPDR_PUPDR8_1 ((uint32_t)0x00020000)
+#define GPIO_PUPDR_PUPDR9 ((uint32_t)0x000C0000)
+#define GPIO_PUPDR_PUPDR9_0 ((uint32_t)0x00040000)
+#define GPIO_PUPDR_PUPDR9_1 ((uint32_t)0x00080000)
+#define GPIO_PUPDR_PUPDR10 ((uint32_t)0x00300000)
+#define GPIO_PUPDR_PUPDR10_0 ((uint32_t)0x00100000)
+#define GPIO_PUPDR_PUPDR10_1 ((uint32_t)0x00200000)
+#define GPIO_PUPDR_PUPDR11 ((uint32_t)0x00C00000)
+#define GPIO_PUPDR_PUPDR11_0 ((uint32_t)0x00400000)
+#define GPIO_PUPDR_PUPDR11_1 ((uint32_t)0x00800000)
+#define GPIO_PUPDR_PUPDR12 ((uint32_t)0x03000000)
+#define GPIO_PUPDR_PUPDR12_0 ((uint32_t)0x01000000)
+#define GPIO_PUPDR_PUPDR12_1 ((uint32_t)0x02000000)
+#define GPIO_PUPDR_PUPDR13 ((uint32_t)0x0C000000)
+#define GPIO_PUPDR_PUPDR13_0 ((uint32_t)0x04000000)
+#define GPIO_PUPDR_PUPDR13_1 ((uint32_t)0x08000000)
+#define GPIO_PUPDR_PUPDR14 ((uint32_t)0x30000000)
+#define GPIO_PUPDR_PUPDR14_0 ((uint32_t)0x10000000)
+#define GPIO_PUPDR_PUPDR14_1 ((uint32_t)0x20000000)
+#define GPIO_PUPDR_PUPDR15 ((uint32_t)0xC0000000)
+#define GPIO_PUPDR_PUPDR15_0 ((uint32_t)0x40000000)
+#define GPIO_PUPDR_PUPDR15_1 ((uint32_t)0x80000000)
+
+/******************* Bit definition for GPIO_IDR register *******************/
+#define GPIO_IDR_0 ((uint32_t)0x00000001)
+#define GPIO_IDR_1 ((uint32_t)0x00000002)
+#define GPIO_IDR_2 ((uint32_t)0x00000004)
+#define GPIO_IDR_3 ((uint32_t)0x00000008)
+#define GPIO_IDR_4 ((uint32_t)0x00000010)
+#define GPIO_IDR_5 ((uint32_t)0x00000020)
+#define GPIO_IDR_6 ((uint32_t)0x00000040)
+#define GPIO_IDR_7 ((uint32_t)0x00000080)
+#define GPIO_IDR_8 ((uint32_t)0x00000100)
+#define GPIO_IDR_9 ((uint32_t)0x00000200)
+#define GPIO_IDR_10 ((uint32_t)0x00000400)
+#define GPIO_IDR_11 ((uint32_t)0x00000800)
+#define GPIO_IDR_12 ((uint32_t)0x00001000)
+#define GPIO_IDR_13 ((uint32_t)0x00002000)
+#define GPIO_IDR_14 ((uint32_t)0x00004000)
+#define GPIO_IDR_15 ((uint32_t)0x00008000)
+
+/****************** Bit definition for GPIO_ODR register ********************/
+#define GPIO_ODR_0 ((uint32_t)0x00000001)
+#define GPIO_ODR_1 ((uint32_t)0x00000002)
+#define GPIO_ODR_2 ((uint32_t)0x00000004)
+#define GPIO_ODR_3 ((uint32_t)0x00000008)
+#define GPIO_ODR_4 ((uint32_t)0x00000010)
+#define GPIO_ODR_5 ((uint32_t)0x00000020)
+#define GPIO_ODR_6 ((uint32_t)0x00000040)
+#define GPIO_ODR_7 ((uint32_t)0x00000080)
+#define GPIO_ODR_8 ((uint32_t)0x00000100)
+#define GPIO_ODR_9 ((uint32_t)0x00000200)
+#define GPIO_ODR_10 ((uint32_t)0x00000400)
+#define GPIO_ODR_11 ((uint32_t)0x00000800)
+#define GPIO_ODR_12 ((uint32_t)0x00001000)
+#define GPIO_ODR_13 ((uint32_t)0x00002000)
+#define GPIO_ODR_14 ((uint32_t)0x00004000)
+#define GPIO_ODR_15 ((uint32_t)0x00008000)
+
+/****************** Bit definition for GPIO_BSRR register ********************/
+#define GPIO_BSRR_BS_0 ((uint32_t)0x00000001)
+#define GPIO_BSRR_BS_1 ((uint32_t)0x00000002)
+#define GPIO_BSRR_BS_2 ((uint32_t)0x00000004)
+#define GPIO_BSRR_BS_3 ((uint32_t)0x00000008)
+#define GPIO_BSRR_BS_4 ((uint32_t)0x00000010)
+#define GPIO_BSRR_BS_5 ((uint32_t)0x00000020)
+#define GPIO_BSRR_BS_6 ((uint32_t)0x00000040)
+#define GPIO_BSRR_BS_7 ((uint32_t)0x00000080)
+#define GPIO_BSRR_BS_8 ((uint32_t)0x00000100)
+#define GPIO_BSRR_BS_9 ((uint32_t)0x00000200)
+#define GPIO_BSRR_BS_10 ((uint32_t)0x00000400)
+#define GPIO_BSRR_BS_11 ((uint32_t)0x00000800)
+#define GPIO_BSRR_BS_12 ((uint32_t)0x00001000)
+#define GPIO_BSRR_BS_13 ((uint32_t)0x00002000)
+#define GPIO_BSRR_BS_14 ((uint32_t)0x00004000)
+#define GPIO_BSRR_BS_15 ((uint32_t)0x00008000)
+#define GPIO_BSRR_BR_0 ((uint32_t)0x00010000)
+#define GPIO_BSRR_BR_1 ((uint32_t)0x00020000)
+#define GPIO_BSRR_BR_2 ((uint32_t)0x00040000)
+#define GPIO_BSRR_BR_3 ((uint32_t)0x00080000)
+#define GPIO_BSRR_BR_4 ((uint32_t)0x00100000)
+#define GPIO_BSRR_BR_5 ((uint32_t)0x00200000)
+#define GPIO_BSRR_BR_6 ((uint32_t)0x00400000)
+#define GPIO_BSRR_BR_7 ((uint32_t)0x00800000)
+#define GPIO_BSRR_BR_8 ((uint32_t)0x01000000)
+#define GPIO_BSRR_BR_9 ((uint32_t)0x02000000)
+#define GPIO_BSRR_BR_10 ((uint32_t)0x04000000)
+#define GPIO_BSRR_BR_11 ((uint32_t)0x08000000)
+#define GPIO_BSRR_BR_12 ((uint32_t)0x10000000)
+#define GPIO_BSRR_BR_13 ((uint32_t)0x20000000)
+#define GPIO_BSRR_BR_14 ((uint32_t)0x40000000)
+#define GPIO_BSRR_BR_15 ((uint32_t)0x80000000)
+
+/****************** Bit definition for GPIO_LCKR register ********************/
+#define GPIO_LCKR_LCK0 ((uint32_t)0x00000001)
+#define GPIO_LCKR_LCK1 ((uint32_t)0x00000002)
+#define GPIO_LCKR_LCK2 ((uint32_t)0x00000004)
+#define GPIO_LCKR_LCK3 ((uint32_t)0x00000008)
+#define GPIO_LCKR_LCK4 ((uint32_t)0x00000010)
+#define GPIO_LCKR_LCK5 ((uint32_t)0x00000020)
+#define GPIO_LCKR_LCK6 ((uint32_t)0x00000040)
+#define GPIO_LCKR_LCK7 ((uint32_t)0x00000080)
+#define GPIO_LCKR_LCK8 ((uint32_t)0x00000100)
+#define GPIO_LCKR_LCK9 ((uint32_t)0x00000200)
+#define GPIO_LCKR_LCK10 ((uint32_t)0x00000400)
+#define GPIO_LCKR_LCK11 ((uint32_t)0x00000800)
+#define GPIO_LCKR_LCK12 ((uint32_t)0x00001000)
+#define GPIO_LCKR_LCK13 ((uint32_t)0x00002000)
+#define GPIO_LCKR_LCK14 ((uint32_t)0x00004000)
+#define GPIO_LCKR_LCK15 ((uint32_t)0x00008000)
+#define GPIO_LCKR_LCKK ((uint32_t)0x00010000)
+
+/****************** Bit definition for GPIO_AFRL register ********************/
+#define GPIO_AFRL_AFRL0 ((uint32_t)0x0000000F)
+#define GPIO_AFRL_AFRL1 ((uint32_t)0x000000F0)
+#define GPIO_AFRL_AFRL2 ((uint32_t)0x00000F00)
+#define GPIO_AFRL_AFRL3 ((uint32_t)0x0000F000)
+#define GPIO_AFRL_AFRL4 ((uint32_t)0x000F0000)
+#define GPIO_AFRL_AFRL5 ((uint32_t)0x00F00000)
+#define GPIO_AFRL_AFRL6 ((uint32_t)0x0F000000)
+#define GPIO_AFRL_AFRL7 ((uint32_t)0xF0000000)
+
+/****************** Bit definition for GPIO_AFRH register ********************/
+#define GPIO_AFRH_AFRH0 ((uint32_t)0x0000000F)
+#define GPIO_AFRH_AFRH1 ((uint32_t)0x000000F0)
+#define GPIO_AFRH_AFRH2 ((uint32_t)0x00000F00)
+#define GPIO_AFRH_AFRH3 ((uint32_t)0x0000F000)
+#define GPIO_AFRH_AFRH4 ((uint32_t)0x000F0000)
+#define GPIO_AFRH_AFRH5 ((uint32_t)0x00F00000)
+#define GPIO_AFRH_AFRH6 ((uint32_t)0x0F000000)
+#define GPIO_AFRH_AFRH7 ((uint32_t)0xF0000000)
+
+/****************** Bit definition for GPIO_BRR register *********************/
+#define GPIO_BRR_BR_0 ((uint32_t)0x00000001)
+#define GPIO_BRR_BR_1 ((uint32_t)0x00000002)
+#define GPIO_BRR_BR_2 ((uint32_t)0x00000004)
+#define GPIO_BRR_BR_3 ((uint32_t)0x00000008)
+#define GPIO_BRR_BR_4 ((uint32_t)0x00000010)
+#define GPIO_BRR_BR_5 ((uint32_t)0x00000020)
+#define GPIO_BRR_BR_6 ((uint32_t)0x00000040)
+#define GPIO_BRR_BR_7 ((uint32_t)0x00000080)
+#define GPIO_BRR_BR_8 ((uint32_t)0x00000100)
+#define GPIO_BRR_BR_9 ((uint32_t)0x00000200)
+#define GPIO_BRR_BR_10 ((uint32_t)0x00000400)
+#define GPIO_BRR_BR_11 ((uint32_t)0x00000800)
+#define GPIO_BRR_BR_12 ((uint32_t)0x00001000)
+#define GPIO_BRR_BR_13 ((uint32_t)0x00002000)
+#define GPIO_BRR_BR_14 ((uint32_t)0x00004000)
+#define GPIO_BRR_BR_15 ((uint32_t)0x00008000)
+
+/******************************************************************************/
+/* */
+/* Inter-integrated Circuit Interface (I2C) */
+/* */
+/******************************************************************************/
+/******************* Bit definition for I2C_CR1 register *******************/
+#define I2C_CR1_PE ((uint32_t)0x00000001) /*!< Peripheral enable */
+#define I2C_CR1_TXIE ((uint32_t)0x00000002) /*!< TX interrupt enable */
+#define I2C_CR1_RXIE ((uint32_t)0x00000004) /*!< RX interrupt enable */
+#define I2C_CR1_ADDRIE ((uint32_t)0x00000008) /*!< Address match interrupt enable */
+#define I2C_CR1_NACKIE ((uint32_t)0x00000010) /*!< NACK received interrupt enable */
+#define I2C_CR1_STOPIE ((uint32_t)0x00000020) /*!< STOP detection interrupt enable */
+#define I2C_CR1_TCIE ((uint32_t)0x00000040) /*!< Transfer complete interrupt enable */
+#define I2C_CR1_ERRIE ((uint32_t)0x00000080) /*!< Errors interrupt enable */
+#define I2C_CR1_DFN ((uint32_t)0x00000F00) /*!< Digital noise filter */
+#define I2C_CR1_ANFOFF ((uint32_t)0x00001000) /*!< Analog noise filter OFF */
+#define I2C_CR1_SWRST ((uint32_t)0x00002000) /*!< Software reset */
+#define I2C_CR1_TXDMAEN ((uint32_t)0x00004000) /*!< DMA transmission requests enable */
+#define I2C_CR1_RXDMAEN ((uint32_t)0x00008000) /*!< DMA reception requests enable */
+#define I2C_CR1_SBC ((uint32_t)0x00010000) /*!< Slave byte control */
+#define I2C_CR1_NOSTRETCH ((uint32_t)0x00020000) /*!< Clock stretching disable */
+#define I2C_CR1_WUPEN ((uint32_t)0x00040000) /*!< Wakeup from STOP enable */
+#define I2C_CR1_GCEN ((uint32_t)0x00080000) /*!< General call enable */
+#define I2C_CR1_SMBHEN ((uint32_t)0x00100000) /*!< SMBus host address enable */
+#define I2C_CR1_SMBDEN ((uint32_t)0x00200000) /*!< SMBus device default address enable */
+#define I2C_CR1_ALERTEN ((uint32_t)0x00400000) /*!< SMBus alert enable */
+#define I2C_CR1_PECEN ((uint32_t)0x00800000) /*!< PEC enable */
+
+/****************** Bit definition for I2C_CR2 register ********************/
+#define I2C_CR2_SADD ((uint32_t)0x000003FF) /*!< Slave address (master mode) */
+#define I2C_CR2_RD_WRN ((uint32_t)0x00000400) /*!< Transfer direction (master mode) */
+#define I2C_CR2_ADD10 ((uint32_t)0x00000800) /*!< 10-bit addressing mode (master mode) */
+#define I2C_CR2_HEAD10R ((uint32_t)0x00001000) /*!< 10-bit address header only read direction (master mode) */
+#define I2C_CR2_START ((uint32_t)0x00002000) /*!< START generation */
+#define I2C_CR2_STOP ((uint32_t)0x00004000) /*!< STOP generation (master mode) */
+#define I2C_CR2_NACK ((uint32_t)0x00008000) /*!< NACK generation (slave mode) */
+#define I2C_CR2_NBYTES ((uint32_t)0x00FF0000) /*!< Number of bytes */
+#define I2C_CR2_RELOAD ((uint32_t)0x01000000) /*!< NBYTES reload mode */
+#define I2C_CR2_AUTOEND ((uint32_t)0x02000000) /*!< Automatic end mode (master mode) */
+#define I2C_CR2_PECBYTE ((uint32_t)0x04000000) /*!< Packet error checking byte */
+
+/******************* Bit definition for I2C_OAR1 register ******************/
+#define I2C_OAR1_OA1 ((uint32_t)0x000003FF) /*!< Interface own address 1 */
+#define I2C_OAR1_OA1MODE ((uint32_t)0x00000400) /*!< Own address 1 10-bit mode */
+#define I2C_OAR1_OA1EN ((uint32_t)0x00008000) /*!< Own address 1 enable */
+
+/******************* Bit definition for I2C_OAR2 register *******************/
+#define I2C_OAR2_OA2 ((uint32_t)0x000000FE) /*!< Interface own address 2 */
+#define I2C_OAR2_OA2MSK ((uint32_t)0x00000700) /*!< Own address 2 masks */
+#define I2C_OAR2_OA2EN ((uint32_t)0x00008000) /*!< Own address 2 enable */
+
+/******************* Bit definition for I2C_TIMINGR register *****************/
+#define I2C_TIMINGR_SCLL ((uint32_t)0x000000FF) /*!< SCL low period (master mode) */
+#define I2C_TIMINGR_SCLH ((uint32_t)0x0000FF00) /*!< SCL high period (master mode) */
+#define I2C_TIMINGR_SDADEL ((uint32_t)0x000F0000) /*!< Data hold time */
+#define I2C_TIMINGR_SCLDEL ((uint32_t)0x00F00000) /*!< Data setup time */
+#define I2C_TIMINGR_PRESC ((uint32_t)0xF0000000) /*!< Timings prescaler */
+
+/******************* Bit definition for I2C_TIMEOUTR register *****************/
+#define I2C_TIMEOUTR_TIMEOUTA ((uint32_t)0x00000FFF) /*!< Bus timeout A */
+#define I2C_TIMEOUTR_TIDLE ((uint32_t)0x00001000) /*!< Idle clock timeout detection */
+#define I2C_TIMEOUTR_TIMOUTEN ((uint32_t)0x00008000) /*!< Clock timeout enable */
+#define I2C_TIMEOUTR_TIMEOUTB ((uint32_t)0x0FFF0000) /*!< Bus timeout B*/
+#define I2C_TIMEOUTR_TEXTEN ((uint32_t)0x80000000) /*!< Extended clock timeout enable */
+
+/****************** Bit definition for I2C_ISR register *********************/
+#define I2C_ISR_TXE ((uint32_t)0x00000001) /*!< Transmit data register empty */
+#define I2C_ISR_TXIS ((uint32_t)0x00000002) /*!< Transmit interrupt status */
+#define I2C_ISR_RXNE ((uint32_t)0x00000004) /*!< Receive data register not empty */
+#define I2C_ISR_ADDR ((uint32_t)0x00000008) /*!< Address matched (slave mode)*/
+#define I2C_ISR_NACKF ((uint32_t)0x00000010) /*!< NACK received flag */
+#define I2C_ISR_STOPF ((uint32_t)0x00000020) /*!< STOP detection flag */
+#define I2C_ISR_TC ((uint32_t)0x00000040) /*!< Transfer complete (master mode) */
+#define I2C_ISR_TCR ((uint32_t)0x00000080) /*!< Transfer complete reload */
+#define I2C_ISR_BERR ((uint32_t)0x00000100) /*!< Bus error */
+#define I2C_ISR_ARLO ((uint32_t)0x00000200) /*!< Arbitration lost */
+#define I2C_ISR_OVR ((uint32_t)0x00000400) /*!< Overrun/Underrun */
+#define I2C_ISR_PECERR ((uint32_t)0x00000800) /*!< PEC error in reception */
+#define I2C_ISR_TIMEOUT ((uint32_t)0x00001000) /*!< Timeout or Tlow detection flag */
+#define I2C_ISR_ALERT ((uint32_t)0x00002000) /*!< SMBus alert */
+#define I2C_ISR_BUSY ((uint32_t)0x00008000) /*!< Bus busy */
+#define I2C_ISR_DIR ((uint32_t)0x00010000) /*!< Transfer direction (slave mode) */
+#define I2C_ISR_ADDCODE ((uint32_t)0x00FE0000) /*!< Address match code (slave mode) */
+
+/****************** Bit definition for I2C_ICR register *********************/
+#define I2C_ICR_ADDRCF ((uint32_t)0x00000008) /*!< Address matched clear flag */
+#define I2C_ICR_NACKCF ((uint32_t)0x00000010) /*!< NACK clear flag */
+#define I2C_ICR_STOPCF ((uint32_t)0x00000020) /*!< STOP detection clear flag */
+#define I2C_ICR_BERRCF ((uint32_t)0x00000100) /*!< Bus error clear flag */
+#define I2C_ICR_ARLOCF ((uint32_t)0x00000200) /*!< Arbitration lost clear flag */
+#define I2C_ICR_OVRCF ((uint32_t)0x00000400) /*!< Overrun/Underrun clear flag */
+#define I2C_ICR_PECCF ((uint32_t)0x00000800) /*!< PAC error clear flag */
+#define I2C_ICR_TIMOUTCF ((uint32_t)0x00001000) /*!< Timeout clear flag */
+#define I2C_ICR_ALERTCF ((uint32_t)0x00002000) /*!< Alert clear flag */
+
+/****************** Bit definition for I2C_PECR register ********************/
+#define I2C_PECR_PEC ((uint32_t)0x000000FF) /*!< PEC register */
+
+/****************** Bit definition for I2C_RXDR register *********************/
+#define I2C_RXDR_RXDATA ((uint32_t)0x000000FF) /*!< 8-bit receive data */
+
+/****************** Bit definition for I2C_TXDR register *********************/
+#define I2C_TXDR_TXDATA ((uint32_t)0x000000FF) /*!< 8-bit transmit data */
+
+
+/******************************************************************************/
+/* */
+/* Independent WATCHDOG (IWDG) */
+/* */
+/******************************************************************************/
+/******************* Bit definition for IWDG_KR register ********************/
+#define IWDG_KR_KEY ((uint16_t)0xFFFF) /*!< Key value (write only, read 0000h) */
+
+/******************* Bit definition for IWDG_PR register ********************/
+#define IWDG_PR_PR ((uint8_t)0x07) /*!< PR[2:0] (Prescaler divider) */
+#define IWDG_PR_PR_0 ((uint8_t)0x01) /*!< Bit 0 */
+#define IWDG_PR_PR_1 ((uint8_t)0x02) /*!< Bit 1 */
+#define IWDG_PR_PR_2 ((uint8_t)0x04) /*!< Bit 2 */
+
+/******************* Bit definition for IWDG_RLR register *******************/
+#define IWDG_RLR_RL ((uint16_t)0x0FFF) /*!< Watchdog counter reload value */
+
+/******************* Bit definition for IWDG_SR register ********************/
+#define IWDG_SR_PVU ((uint8_t)0x01) /*!< Watchdog prescaler value update */
+#define IWDG_SR_RVU ((uint8_t)0x02) /*!< Watchdog counter reload value update */
+#define IWDG_SR_WVU ((uint8_t)0x04) /*!< Watchdog counter window value update */
+
+/******************* Bit definition for IWDG_KR register ********************/
+#define IWDG_WINR_WIN ((uint16_t)0x0FFF) /*!< Watchdog counter window value */
+
+/******************************************************************************/
+/* */
+/* Power Control */
+/* */
+/******************************************************************************/
+/******************** Bit definition for PWR_CR register ********************/
+#define PWR_CR_LPSDSR ((uint16_t)0x0001) /*!< Low-power deepsleep/sleep/low power run */
+#define PWR_CR_PDDS ((uint16_t)0x0002) /*!< Power Down Deepsleep */
+#define PWR_CR_CWUF ((uint16_t)0x0004) /*!< Clear Wakeup Flag */
+#define PWR_CR_CSBF ((uint16_t)0x0008) /*!< Clear Standby Flag */
+#define PWR_CR_PVDE ((uint16_t)0x0010) /*!< Power Voltage Detector Enable */
+
+#define PWR_CR_PLS ((uint16_t)0x00E0) /*!< PLS[2:0] bits (PVD Level Selection) */
+#define PWR_CR_PLS_0 ((uint16_t)0x0020) /*!< Bit 0 */
+#define PWR_CR_PLS_1 ((uint16_t)0x0040) /*!< Bit 1 */
+#define PWR_CR_PLS_2 ((uint16_t)0x0080) /*!< Bit 2 */
+
+/*!< PVD level configuration */
+#define PWR_CR_PLS_LEV0 ((uint16_t)0x0000) /*!< PVD level 0 */
+#define PWR_CR_PLS_LEV1 ((uint16_t)0x0020) /*!< PVD level 1 */
+#define PWR_CR_PLS_LEV2 ((uint16_t)0x0040) /*!< PVD level 2 */
+#define PWR_CR_PLS_LEV3 ((uint16_t)0x0060) /*!< PVD level 3 */
+#define PWR_CR_PLS_LEV4 ((uint16_t)0x0080) /*!< PVD level 4 */
+#define PWR_CR_PLS_LEV5 ((uint16_t)0x00A0) /*!< PVD level 5 */
+#define PWR_CR_PLS_LEV6 ((uint16_t)0x00C0) /*!< PVD level 6 */
+#define PWR_CR_PLS_LEV7 ((uint16_t)0x00E0) /*!< PVD level 7 */
+
+#define PWR_CR_DBP ((uint16_t)0x0100) /*!< Disable Backup Domain write protection */
+
+/******************* Bit definition for PWR_CSR register ********************/
+#define PWR_CSR_WUF ((uint16_t)0x0001) /*!< Wakeup Flag */
+#define PWR_CSR_SBF ((uint16_t)0x0002) /*!< Standby Flag */
+#define PWR_CSR_PVDO ((uint16_t)0x0004) /*!< PVD Output */
+#define PWR_CSR_VREFINTRDYF ((uint16_t)0x0008) /*!< Internal voltage reference (VREFINT) ready flag */
+
+#define PWR_CSR_EWUP1 ((uint16_t)0x0100) /*!< Enable WKUP pin 1 */
+#define PWR_CSR_EWUP2 ((uint16_t)0x0200) /*!< Enable WKUP pin 2 */
+#define PWR_CSR_EWUP3 ((uint16_t)0x0400) /*!< Enable WKUP pin 3 */
+
+/******************************************************************************/
+/* */
+/* Reset and Clock Control */
+/* */
+/******************************************************************************/
+/******************** Bit definition for RCC_CR register ********************/
+#define RCC_CR_HSION ((uint32_t)0x00000001)
+#define RCC_CR_HSIRDY ((uint32_t)0x00000002)
+
+#define RCC_CR_HSITRIM ((uint32_t)0x000000F8)
+#define RCC_CR_HSITRIM_0 ((uint32_t)0x00000008)/*!<Bit 0 */
+#define RCC_CR_HSITRIM_1 ((uint32_t)0x00000010)/*!<Bit 1 */
+#define RCC_CR_HSITRIM_2 ((uint32_t)0x00000020)/*!<Bit 2 */
+#define RCC_CR_HSITRIM_3 ((uint32_t)0x00000040)/*!<Bit 3 */
+#define RCC_CR_HSITRIM_4 ((uint32_t)0x00000080)/*!<Bit 4 */
+
+#define RCC_CR_HSICAL ((uint32_t)0x0000FF00)
+#define RCC_CR_HSICAL_0 ((uint32_t)0x00000100)/*!<Bit 0 */
+#define RCC_CR_HSICAL_1 ((uint32_t)0x00000200)/*!<Bit 1 */
+#define RCC_CR_HSICAL_2 ((uint32_t)0x00000400)/*!<Bit 2 */
+#define RCC_CR_HSICAL_3 ((uint32_t)0x00000800)/*!<Bit 3 */
+#define RCC_CR_HSICAL_4 ((uint32_t)0x00001000)/*!<Bit 4 */
+#define RCC_CR_HSICAL_5 ((uint32_t)0x00002000)/*!<Bit 5 */
+#define RCC_CR_HSICAL_6 ((uint32_t)0x00004000)/*!<Bit 6 */
+#define RCC_CR_HSICAL_7 ((uint32_t)0x00008000)/*!<Bit 7 */
+
+#define RCC_CR_HSEON ((uint32_t)0x00010000)
+#define RCC_CR_HSERDY ((uint32_t)0x00020000)
+#define RCC_CR_HSEBYP ((uint32_t)0x00040000)
+#define RCC_CR_CSSON ((uint32_t)0x00080000)
+
+#define RCC_CR_PLLON ((uint32_t)0x01000000)
+#define RCC_CR_PLLRDY ((uint32_t)0x02000000)
+
+/******************** Bit definition for RCC_CFGR register ******************/
+/*!< SW configuration */
+#define RCC_CFGR_SW ((uint32_t)0x00000003) /*!< SW[1:0] bits (System clock Switch) */
+#define RCC_CFGR_SW_0 ((uint32_t)0x00000001) /*!< Bit 0 */
+#define RCC_CFGR_SW_1 ((uint32_t)0x00000002) /*!< Bit 1 */
+
+#define RCC_CFGR_SW_HSI ((uint32_t)0x00000000) /*!< HSI selected as system clock */
+#define RCC_CFGR_SW_HSE ((uint32_t)0x00000001) /*!< HSE selected as system clock */
+#define RCC_CFGR_SW_PLL ((uint32_t)0x00000002) /*!< PLL selected as system clock */
+
+/*!< SWS configuration */
+#define RCC_CFGR_SWS ((uint32_t)0x0000000C) /*!< SWS[1:0] bits (System Clock Switch Status) */
+#define RCC_CFGR_SWS_0 ((uint32_t)0x00000004) /*!< Bit 0 */
+#define RCC_CFGR_SWS_1 ((uint32_t)0x00000008) /*!< Bit 1 */
+
+#define RCC_CFGR_SWS_HSI ((uint32_t)0x00000000) /*!< HSI oscillator used as system clock */
+#define RCC_CFGR_SWS_HSE ((uint32_t)0x00000004) /*!< HSE oscillator used as system clock */
+#define RCC_CFGR_SWS_PLL ((uint32_t)0x00000008) /*!< PLL used as system clock */
+
+/*!< HPRE configuration */
+#define RCC_CFGR_HPRE ((uint32_t)0x000000F0) /*!< HPRE[3:0] bits (AHB prescaler) */
+#define RCC_CFGR_HPRE_0 ((uint32_t)0x00000010) /*!< Bit 0 */
+#define RCC_CFGR_HPRE_1 ((uint32_t)0x00000020) /*!< Bit 1 */
+#define RCC_CFGR_HPRE_2 ((uint32_t)0x00000040) /*!< Bit 2 */
+#define RCC_CFGR_HPRE_3 ((uint32_t)0x00000080) /*!< Bit 3 */
+
+#define RCC_CFGR_HPRE_DIV1 ((uint32_t)0x00000000) /*!< SYSCLK not divided */
+#define RCC_CFGR_HPRE_DIV2 ((uint32_t)0x00000080) /*!< SYSCLK divided by 2 */
+#define RCC_CFGR_HPRE_DIV4 ((uint32_t)0x00000090) /*!< SYSCLK divided by 4 */
+#define RCC_CFGR_HPRE_DIV8 ((uint32_t)0x000000A0) /*!< SYSCLK divided by 8 */
+#define RCC_CFGR_HPRE_DIV16 ((uint32_t)0x000000B0) /*!< SYSCLK divided by 16 */
+#define RCC_CFGR_HPRE_DIV64 ((uint32_t)0x000000C0) /*!< SYSCLK divided by 64 */
+#define RCC_CFGR_HPRE_DIV128 ((uint32_t)0x000000D0) /*!< SYSCLK divided by 128 */
+#define RCC_CFGR_HPRE_DIV256 ((uint32_t)0x000000E0) /*!< SYSCLK divided by 256 */
+#define RCC_CFGR_HPRE_DIV512 ((uint32_t)0x000000F0) /*!< SYSCLK divided by 512 */
+
+/*!< PPRE1 configuration */
+#define RCC_CFGR_PPRE1 ((uint32_t)0x00000700) /*!< PRE1[2:0] bits (APB1 prescaler) */
+#define RCC_CFGR_PPRE1_0 ((uint32_t)0x00000100) /*!< Bit 0 */
+#define RCC_CFGR_PPRE1_1 ((uint32_t)0x00000200) /*!< Bit 1 */
+#define RCC_CFGR_PPRE1_2 ((uint32_t)0x00000400) /*!< Bit 2 */
+
+#define RCC_CFGR_PPRE1_DIV1 ((uint32_t)0x00000000) /*!< HCLK not divided */
+#define RCC_CFGR_PPRE1_DIV2 ((uint32_t)0x00000400) /*!< HCLK divided by 2 */
+#define RCC_CFGR_PPRE1_DIV4 ((uint32_t)0x00000500) /*!< HCLK divided by 4 */
+#define RCC_CFGR_PPRE1_DIV8 ((uint32_t)0x00000600) /*!< HCLK divided by 8 */
+#define RCC_CFGR_PPRE1_DIV16 ((uint32_t)0x00000700) /*!< HCLK divided by 16 */
+
+/*!< PPRE2 configuration */
+#define RCC_CFGR_PPRE2 ((uint32_t)0x00003800) /*!< PRE2[2:0] bits (APB2 prescaler) */
+#define RCC_CFGR_PPRE2_0 ((uint32_t)0x00000800) /*!< Bit 0 */
+#define RCC_CFGR_PPRE2_1 ((uint32_t)0x00001000) /*!< Bit 1 */
+#define RCC_CFGR_PPRE2_2 ((uint32_t)0x00002000) /*!< Bit 2 */
+
+#define RCC_CFGR_PPRE2_DIV1 ((uint32_t)0x00000000) /*!< HCLK not divided */
+#define RCC_CFGR_PPRE2_DIV2 ((uint32_t)0x00002000) /*!< HCLK divided by 2 */
+#define RCC_CFGR_PPRE2_DIV4 ((uint32_t)0x00002800) /*!< HCLK divided by 4 */
+#define RCC_CFGR_PPRE2_DIV8 ((uint32_t)0x00003000) /*!< HCLK divided by 8 */
+#define RCC_CFGR_PPRE2_DIV16 ((uint32_t)0x00003800) /*!< HCLK divided by 16 */
+
+#define RCC_CFGR_PLLSRC ((uint32_t)0x00010000) /*!< PLL entry clock source */
+
+#define RCC_CFGR_PLLXTPRE ((uint32_t)0x00020000) /*!< HSE divider for PLL entry */
+
+/*!< PLLMUL configuration */
+#define RCC_CFGR_PLLMULL ((uint32_t)0x003C0000) /*!< PLLMUL[3:0] bits (PLL multiplication factor) */
+#define RCC_CFGR_PLLMULL_0 ((uint32_t)0x00040000) /*!< Bit 0 */
+#define RCC_CFGR_PLLMULL_1 ((uint32_t)0x00080000) /*!< Bit 1 */
+#define RCC_CFGR_PLLMULL_2 ((uint32_t)0x00100000) /*!< Bit 2 */
+#define RCC_CFGR_PLLMULL_3 ((uint32_t)0x00200000) /*!< Bit 3 */
+
+#define RCC_CFGR_PLLSRC_HSI_Div2 ((uint32_t)0x00000000) /*!< HSI clock divided by 2 selected as PLL entry clock source */
+#define RCC_CFGR_PLLSRC_PREDIV1 ((uint32_t)0x00010000) /*!< PREDIV1 clock selected as PLL entry clock source */
+
+#define RCC_CFGR_PLLXTPRE_PREDIV1 ((uint32_t)0x00000000) /*!< PREDIV1 clock not divided for PLL entry */
+#define RCC_CFGR_PLLXTPRE_PREDIV1_Div2 ((uint32_t)0x00020000) /*!< PREDIV1 clock divided by 2 for PLL entry */
+
+#define RCC_CFGR_PLLMULL2 ((uint32_t)0x00000000) /*!< PLL input clock*2 */
+#define RCC_CFGR_PLLMULL3 ((uint32_t)0x00040000) /*!< PLL input clock*3 */
+#define RCC_CFGR_PLLMULL4 ((uint32_t)0x00080000) /*!< PLL input clock*4 */
+#define RCC_CFGR_PLLMULL5 ((uint32_t)0x000C0000) /*!< PLL input clock*5 */
+#define RCC_CFGR_PLLMULL6 ((uint32_t)0x00100000) /*!< PLL input clock*6 */
+#define RCC_CFGR_PLLMULL7 ((uint32_t)0x00140000) /*!< PLL input clock*7 */
+#define RCC_CFGR_PLLMULL8 ((uint32_t)0x00180000) /*!< PLL input clock*8 */
+#define RCC_CFGR_PLLMULL9 ((uint32_t)0x001C0000) /*!< PLL input clock*9 */
+#define RCC_CFGR_PLLMULL10 ((uint32_t)0x00200000) /*!< PLL input clock10 */
+#define RCC_CFGR_PLLMULL11 ((uint32_t)0x00240000) /*!< PLL input clock*11 */
+#define RCC_CFGR_PLLMULL12 ((uint32_t)0x00280000) /*!< PLL input clock*12 */
+#define RCC_CFGR_PLLMULL13 ((uint32_t)0x002C0000) /*!< PLL input clock*13 */
+#define RCC_CFGR_PLLMULL14 ((uint32_t)0x00300000) /*!< PLL input clock*14 */
+#define RCC_CFGR_PLLMULL15 ((uint32_t)0x00340000) /*!< PLL input clock*15 */
+#define RCC_CFGR_PLLMULL16 ((uint32_t)0x00380000) /*!< PLL input clock*16 */
+
+/*!< USB configuration */
+#define RCC_CFGR_USBPRE ((uint32_t)0x00400000) /*!< USB prescaler */
+
+/*!< I2S configuration */
+#define RCC_CFGR_I2SSRC ((uint32_t)0x00800000) /*!< I2S external clock source selection */
+
+/*!< MCO configuration */
+#define RCC_CFGR_MCO ((uint32_t)0x07000000) /*!< MCO[2:0] bits (Microcontroller Clock Output) */
+#define RCC_CFGR_MCO_0 ((uint32_t)0x01000000) /*!< Bit 0 */
+#define RCC_CFGR_MCO_1 ((uint32_t)0x02000000) /*!< Bit 1 */
+#define RCC_CFGR_MCO_2 ((uint32_t)0x04000000) /*!< Bit 2 */
+
+#define RCC_CFGR_MCO_NOCLOCK ((uint32_t)0x00000000) /*!< No clock */
+#define RCC_CFGR_MCO_LSI ((uint32_t)0x02000000) /*!< LSI clock selected as MCO source */
+#define RCC_CFGR_MCO_LSE ((uint32_t)0x03000000) /*!< LSE clock selected as MCO source */
+#define RCC_CFGR_MCO_SYSCLK ((uint32_t)0x04000000) /*!< System clock selected as MCO source */
+#define RCC_CFGR_MCO_HSI ((uint32_t)0x05000000) /*!< HSI clock selected as MCO source */
+#define RCC_CFGR_MCO_HSE ((uint32_t)0x06000000) /*!< HSE clock selected as MCO source */
+#define RCC_CFGR_MCO_PLL ((uint32_t)0x07000000) /*!< PLL clock divided by 2 selected as MCO source */
+
+#define RCC_CFGR_MCOF ((uint32_t)0x10000000) /*!< Microcontroller Clock Output Flag */
+
+/********************* Bit definition for RCC_CIR register ********************/
+#define RCC_CIR_LSIRDYF ((uint32_t)0x00000001) /*!< LSI Ready Interrupt flag */
+#define RCC_CIR_LSERDYF ((uint32_t)0x00000002) /*!< LSE Ready Interrupt flag */
+#define RCC_CIR_HSIRDYF ((uint32_t)0x00000004) /*!< HSI Ready Interrupt flag */
+#define RCC_CIR_HSERDYF ((uint32_t)0x00000008) /*!< HSE Ready Interrupt flag */
+#define RCC_CIR_PLLRDYF ((uint32_t)0x00000010) /*!< PLL Ready Interrupt flag */
+#define RCC_CIR_CSSF ((uint32_t)0x00000080) /*!< Clock Security System Interrupt flag */
+#define RCC_CIR_LSIRDYIE ((uint32_t)0x00000100) /*!< LSI Ready Interrupt Enable */
+#define RCC_CIR_LSERDYIE ((uint32_t)0x00000200) /*!< LSE Ready Interrupt Enable */
+#define RCC_CIR_HSIRDYIE ((uint32_t)0x00000400) /*!< HSI Ready Interrupt Enable */
+#define RCC_CIR_HSERDYIE ((uint32_t)0x00000800) /*!< HSE Ready Interrupt Enable */
+#define RCC_CIR_PLLRDYIE ((uint32_t)0x00001000) /*!< PLL Ready Interrupt Enable */
+#define RCC_CIR_LSIRDYC ((uint32_t)0x00010000) /*!< LSI Ready Interrupt Clear */
+#define RCC_CIR_LSERDYC ((uint32_t)0x00020000) /*!< LSE Ready Interrupt Clear */
+#define RCC_CIR_HSIRDYC ((uint32_t)0x00040000) /*!< HSI Ready Interrupt Clear */
+#define RCC_CIR_HSERDYC ((uint32_t)0x00080000) /*!< HSE Ready Interrupt Clear */
+#define RCC_CIR_PLLRDYC ((uint32_t)0x00100000) /*!< PLL Ready Interrupt Clear */
+#define RCC_CIR_CSSC ((uint32_t)0x00800000) /*!< Clock Security System Interrupt Clear */
+
+/****************** Bit definition for RCC_APB2RSTR register *****************/
+#define RCC_APB2RSTR_SYSCFGRST ((uint32_t)0x00000001) /*!< SYSCFG reset */
+#define RCC_APB2RSTR_TIM1RST ((uint32_t)0x00000200) /*!< TIM1 reset */
+#define RCC_APB2RSTR_SPI1RST ((uint32_t)0x00001000) /*!< SPI1 reset */
+#define RCC_APB2RSTR_TIM8RST ((uint32_t)0x00000200) /*!< TIM8 reset */
+#define RCC_APB2RSTR_USART1RST ((uint32_t)0x00004000) /*!< USART1 reset */
+#define RCC_APB2RSTR_TIM15RST ((uint32_t)0x00010000) /*!< TIM15 reset */
+#define RCC_APB2RSTR_TIM16RST ((uint32_t)0x00020000) /*!< TIM16 reset */
+#define RCC_APB2RSTR_TIM17RST ((uint32_t)0x00040000) /*!< TIM17 reset */
+
+/****************** Bit definition for RCC_APB1RSTR register ******************/
+#define RCC_APB1RSTR_TIM2RST ((uint32_t)0x00000001) /*!< Timer 2 reset */
+#define RCC_APB1RSTR_TIM3RST ((uint32_t)0x00000002) /*!< Timer 3 reset */
+#define RCC_APB1RSTR_TIM4RST ((uint32_t)0x00000004) /*!< Timer 4 reset */
+#define RCC_APB1RSTR_TIM6RST ((uint32_t)0x00000010) /*!< Timer 6 reset */
+#define RCC_APB1RSTR_TIM7RST ((uint32_t)0x00000020) /*!< Timer 7 reset */
+#define RCC_APB1RSTR_WWDGRST ((uint32_t)0x00000800) /*!< Window Watchdog reset */
+#define RCC_APB1RSTR_SPI2RST ((uint32_t)0x00004000) /*!< SPI2 reset */
+#define RCC_APB1RSTR_SPI3RST ((uint32_t)0x00008000) /*!< SPI3 reset */
+#define RCC_APB1RSTR_USART2RST ((uint32_t)0x00020000) /*!< USART 2 reset */
+#define RCC_APB1RSTR_USART3RST ((uint32_t)0x00040000) /*!< USART 3 reset */
+#define RCC_APB1RSTR_UART4RST ((uint32_t)0x00080000) /*!< UART 4 reset */
+#define RCC_APB1RSTR_UART5RST ((uint32_t)0x00100000) /*!< UART 5 reset */
+#define RCC_APB1RSTR_I2C1RST ((uint32_t)0x00200000) /*!< I2C 1 reset */
+#define RCC_APB1RSTR_I2C2RST ((uint32_t)0x00400000) /*!< I2C 2 reset */
+#define RCC_APB1RSTR_USBRST ((uint32_t)0x00800000) /*!< USB reset */
+#define RCC_APB1RSTR_CAN1RST ((uint32_t)0x02000000) /*!< CAN reset */
+#define RCC_APB1RSTR_PWRRST ((uint32_t)0x10000000) /*!< PWR reset */
+#define RCC_APB1RSTR_DACRST ((uint32_t)0x20000000) /*!< DAC reset */
+
+/****************** Bit definition for RCC_AHBENR register ******************/
+#define RCC_AHBENR_DMA1EN ((uint32_t)0x00000001) /*!< DMA1 clock enable */
+#define RCC_AHBENR_DMA2EN ((uint32_t)0x00000002) /*!< DMA2 clock enable */
+#define RCC_AHBENR_SRAMEN ((uint32_t)0x00000004) /*!< SRAM interface clock enable */
+#define RCC_AHBENR_FLITFEN ((uint32_t)0x00000010) /*!< FLITF clock enable */
+#define RCC_AHBENR_CRCEN ((uint32_t)0x00000040) /*!< CRC clock enable */
+#define RCC_AHBENR_GPIOAEN ((uint32_t)0x00020000) /*!< GPIOA clock enable */
+#define RCC_AHBENR_GPIOBEN ((uint32_t)0x00040000) /*!< GPIOB clock enable */
+#define RCC_AHBENR_GPIOCEN ((uint32_t)0x00080000) /*!< GPIOC clock enable */
+#define RCC_AHBENR_GPIODEN ((uint32_t)0x00100000) /*!< GPIOD clock enable */
+#define RCC_AHBENR_GPIOEEN ((uint32_t)0x00200000) /*!< GPIOE clock enable */
+#define RCC_AHBENR_GPIOFEN ((uint32_t)0x00400000) /*!< GPIOF clock enable */
+#define RCC_AHBENR_TSEN ((uint32_t)0x01000000) /*!< TS clock enable */
+#define RCC_AHBENR_ADC12EN ((uint32_t)0x10000000) /*!< ADC1/ ADC2 clock enable */
+#define RCC_AHBENR_ADC34EN ((uint32_t)0x20000000) /*!< ADC1/ ADC2 clock enable */
+
+/***************** Bit definition for RCC_APB2ENR register ******************/
+#define RCC_APB2ENR_SYSCFGEN ((uint32_t)0x00000001) /*!< SYSCFG clock enable */
+#define RCC_APB2ENR_TIM1EN ((uint32_t)0x00000800) /*!< TIM1 clock enable */
+#define RCC_APB2ENR_SPI1EN ((uint32_t)0x00001000) /*!< SPI1 clock enable */
+#define RCC_APB2ENR_TIM8EN ((uint32_t)0x00002000) /*!< TIM8 clock enable */
+#define RCC_APB2ENR_USART1EN ((uint32_t)0x00004000) /*!< USART1 clock enable */
+#define RCC_APB2ENR_TIM15EN ((uint32_t)0x00010000) /*!< TIM15 clock enable */
+#define RCC_APB2ENR_TIM16EN ((uint32_t)0x00020000) /*!< TIM16 clock enable */
+#define RCC_APB2ENR_TIM17EN ((uint32_t)0x00040000) /*!< TIM17 clock enable */
+
+/****************** Bit definition for RCC_APB1ENR register ******************/
+#define RCC_APB1ENR_TIM2EN ((uint32_t)0x00000001) /*!< Timer 2 clock enable */
+#define RCC_APB1ENR_TIM3EN ((uint32_t)0x00000002) /*!< Timer 3 clock enable */
+#define RCC_APB1ENR_TIM4EN ((uint32_t)0x00000004) /*!< Timer 4 clock enable */
+#define RCC_APB1ENR_TIM6EN ((uint32_t)0x00000010) /*!< Timer 6 clock enable */
+#define RCC_APB1ENR_TIM7EN ((uint32_t)0x00000020) /*!< Timer 7 clock enable */
+#define RCC_APB1ENR_WWDGEN ((uint32_t)0x00000800) /*!< Window Watchdog clock enable */
+#define RCC_APB1ENR_SPI2EN ((uint32_t)0x00004000) /*!< SPI2 clock enable */
+#define RCC_APB1ENR_SPI3EN ((uint32_t)0x00008000) /*!< SPI3 clock enable */
+#define RCC_APB1ENR_USART2EN ((uint32_t)0x00020000) /*!< USART 2 clock enable */
+#define RCC_APB1ENR_USART3EN ((uint32_t)0x00040000) /*!< USART 3 clock enable */
+/* CHIBIOS FIX */
+#define RCC_APB1ENR_UART4EN ((uint32_t)0x00080000) /*!< UART 3 clock enable */
+#define RCC_APB1ENR_UART5EN ((uint32_t)0x00100000) /*!< UART 4 clock enable */
+//#define RCC_APB1ENR_UART3EN ((uint32_t)0x00080000) /*!< UART 3 clock enable */
+//#define RCC_APB1ENR_UART4EN ((uint32_t)0x00100000) /*!< UART 4 clock enable */
+#define RCC_APB1ENR_I2C1EN ((uint32_t)0x00200000) /*!< I2C 1 clock enable */
+#define RCC_APB1ENR_I2C2EN ((uint32_t)0x00400000) /*!< I2C 2 clock enable */
+#define RCC_APB1ENR_USBEN ((uint32_t)0x00800000) /*!< USB clock enable */
+#define RCC_APB1ENR_CAN1EN ((uint32_t)0x02000000) /*!< CAN clock enable */
+#define RCC_APB1ENR_PWREN ((uint32_t)0x10000000) /*!< PWR clock enable */
+#define RCC_APB1ENR_DACEN ((uint32_t)0x20000000) /*!< DAC clock enable */
+
+/******************** Bit definition for RCC_BDCR register ******************/
+#define RCC_BDCR_LSEON ((uint32_t)0x00000001) /*!< External Low Speed oscillator enable */
+#define RCC_BDCR_LSERDY ((uint32_t)0x00000002) /*!< External Low Speed oscillator Ready */
+#define RCC_BDCR_LSEBYP ((uint32_t)0x00000004) /*!< External Low Speed oscillator Bypass */
+
+#define RCC_BDCR_LSEDRV ((uint32_t)0x00000018) /*!< LSEDRV[1:0] bits (LSE Osc. drive capability) */
+#define RCC_BDCR_LSEDRV_0 ((uint32_t)0x00000008) /*!< Bit 0 */
+#define RCC_BDCR_LSEDRV_1 ((uint32_t)0x00000010) /*!< Bit 1 */
+
+
+#define RCC_BDCR_RTCSEL ((uint32_t)0x00000300) /*!< RTCSEL[1:0] bits (RTC clock source selection) */
+#define RCC_BDCR_RTCSEL_0 ((uint32_t)0x00000100) /*!< Bit 0 */
+#define RCC_BDCR_RTCSEL_1 ((uint32_t)0x00000200) /*!< Bit 1 */
+
+/*!< RTC configuration */
+#define RCC_BDCR_RTCSEL_NOCLOCK ((uint32_t)0x00000000) /*!< No clock */
+#define RCC_BDCR_RTCSEL_LSE ((uint32_t)0x00000100) /*!< LSE oscillator clock used as RTC clock */
+#define RCC_BDCR_RTCSEL_LSI ((uint32_t)0x00000200) /*!< LSI oscillator clock used as RTC clock */
+#define RCC_BDCR_RTCSEL_HSE ((uint32_t)0x00000300) /*!< HSE oscillator clock divided by 32 used as RTC clock */
+
+#define RCC_BDCR_RTCEN ((uint32_t)0x00008000) /*!< RTC clock enable */
+#define RCC_BDCR_BDRST ((uint32_t)0x00010000) /*!< Backup domain software reset */
+
+/******************** Bit definition for RCC_CSR register *******************/
+#define RCC_CSR_LSION ((uint32_t)0x00000001) /*!< Internal Low Speed oscillator enable */
+#define RCC_CSR_LSIRDY ((uint32_t)0x00000002) /*!< Internal Low Speed oscillator Ready */
+#define RCC_CSR_RMVF ((uint32_t)0x01000000) /*!< Remove reset flag */
+#define RCC_CSR_OBLRSTF ((uint32_t)0x02000000) /*!< OBL reset flag */
+#define RCC_CSR_PINRSTF ((uint32_t)0x04000000) /*!< PIN reset flag */
+#define RCC_CSR_PORRSTF ((uint32_t)0x08000000) /*!< POR/PDR reset flag */
+#define RCC_CSR_SFTRSTF ((uint32_t)0x10000000) /*!< Software Reset flag */
+#define RCC_CSR_IWDGRSTF ((uint32_t)0x20000000) /*!< Independent Watchdog reset flag */
+#define RCC_CSR_WWDGRSTF ((uint32_t)0x40000000) /*!< Window watchdog reset flag */
+#define RCC_CSR_LPWRRSTF ((uint32_t)0x80000000) /*!< Low-Power reset flag */
+
+/******************* Bit definition for RCC_AHBRSTR register ****************/
+#define RCC_AHBRSTR_GPIOARST ((uint32_t)0x00020000) /*!< GPIOA reset */
+#define RCC_AHBRSTR_GPIOBRST ((uint32_t)0x00040000) /*!< GPIOB reset */
+#define RCC_AHBRSTR_GPIOCRST ((uint32_t)0x00080000) /*!< GPIOC reset */
+#define RCC_AHBRSTR_GPIODRST ((uint32_t)0x00010000) /*!< GPIOD reset */
+#define RCC_AHBRSTR_GPIOFRST ((uint32_t)0x00040000) /*!< GPIOF reset */
+#define RCC_AHBRSTR_TSRST ((uint32_t)0x00100000) /*!< TS reset */
+#define RCC_AHBRSTR_ADC12RST ((uint32_t)0x01000000) /*!< ADC1 & ADC2 reset */
+#define RCC_AHBRSTR_ADC34RST ((uint32_t)0x02000000) /*!< ADC3 & ADC4 reset */
+
+/******************* Bit definition for RCC_CFGR2 register ******************/
+/*!< PREDIV1 configuration */
+#define RCC_CFGR2_PREDIV1 ((uint32_t)0x0000000F) /*!< PREDIV1[3:0] bits */
+#define RCC_CFGR2_PREDIV1_0 ((uint32_t)0x00000001) /*!< Bit 0 */
+#define RCC_CFGR2_PREDIV1_1 ((uint32_t)0x00000002) /*!< Bit 1 */
+#define RCC_CFGR2_PREDIV1_2 ((uint32_t)0x00000004) /*!< Bit 2 */
+#define RCC_CFGR2_PREDIV1_3 ((uint32_t)0x00000008) /*!< Bit 3 */
+
+#define RCC_CFGR2_PREDIV1_DIV1 ((uint32_t)0x00000000) /*!< PREDIV1 input clock not divided */
+#define RCC_CFGR2_PREDIV1_DIV2 ((uint32_t)0x00000001) /*!< PREDIV1 input clock divided by 2 */
+#define RCC_CFGR2_PREDIV1_DIV3 ((uint32_t)0x00000002) /*!< PREDIV1 input clock divided by 3 */
+#define RCC_CFGR2_PREDIV1_DIV4 ((uint32_t)0x00000003) /*!< PREDIV1 input clock divided by 4 */
+#define RCC_CFGR2_PREDIV1_DIV5 ((uint32_t)0x00000004) /*!< PREDIV1 input clock divided by 5 */
+#define RCC_CFGR2_PREDIV1_DIV6 ((uint32_t)0x00000005) /*!< PREDIV1 input clock divided by 6 */
+#define RCC_CFGR2_PREDIV1_DIV7 ((uint32_t)0x00000006) /*!< PREDIV1 input clock divided by 7 */
+#define RCC_CFGR2_PREDIV1_DIV8 ((uint32_t)0x00000007) /*!< PREDIV1 input clock divided by 8 */
+#define RCC_CFGR2_PREDIV1_DIV9 ((uint32_t)0x00000008) /*!< PREDIV1 input clock divided by 9 */
+#define RCC_CFGR2_PREDIV1_DIV10 ((uint32_t)0x00000009) /*!< PREDIV1 input clock divided by 10 */
+#define RCC_CFGR2_PREDIV1_DIV11 ((uint32_t)0x0000000A) /*!< PREDIV1 input clock divided by 11 */
+#define RCC_CFGR2_PREDIV1_DIV12 ((uint32_t)0x0000000B) /*!< PREDIV1 input clock divided by 12 */
+#define RCC_CFGR2_PREDIV1_DIV13 ((uint32_t)0x0000000C) /*!< PREDIV1 input clock divided by 13 */
+#define RCC_CFGR2_PREDIV1_DIV14 ((uint32_t)0x0000000D) /*!< PREDIV1 input clock divided by 14 */
+#define RCC_CFGR2_PREDIV1_DIV15 ((uint32_t)0x0000000E) /*!< PREDIV1 input clock divided by 15 */
+#define RCC_CFGR2_PREDIV1_DIV16 ((uint32_t)0x0000000F) /*!< PREDIV1 input clock divided by 16 */
+
+/*!< ADCPRE12 configuration */
+#define RCC_CFGR2_ADCPRE12 ((uint32_t)0x000001F0) /*!< ADCPRE12[8:4] bits */
+#define RCC_CFGR2_ADCPRE12_0 ((uint32_t)0x00000010) /*!< Bit 0 */
+#define RCC_CFGR2_ADCPRE12_1 ((uint32_t)0x00000020) /*!< Bit 1 */
+#define RCC_CFGR2_ADCPRE12_2 ((uint32_t)0x00000040) /*!< Bit 2 */
+#define RCC_CFGR2_ADCPRE12_3 ((uint32_t)0x00000080) /*!< Bit 3 */
+#define RCC_CFGR2_ADCPRE12_4 ((uint32_t)0x00000100) /*!< Bit 4 */
+
+#define RCC_CFGR2_ADCPRE12_NO ((uint32_t)0x00000000) /*!< ADC12 clock disabled, ADC12 can use AHB clock */
+#define RCC_CFGR2_ADCPRE12_DIV1 ((uint32_t)0x00000100) /*!< ADC12 PLL clock divided by 1 */
+#define RCC_CFGR2_ADCPRE12_DIV2 ((uint32_t)0x00000110) /*!< ADC12 PLL clock divided by 2 */
+#define RCC_CFGR2_ADCPRE12_DIV4 ((uint32_t)0x00000120) /*!< ADC12 PLL clock divided by 4 */
+#define RCC_CFGR2_ADCPRE12_DIV6 ((uint32_t)0x00000130) /*!< ADC12 PLL clock divided by 6 */
+#define RCC_CFGR2_ADCPRE12_DIV8 ((uint32_t)0x00000140) /*!< ADC12 PLL clock divided by 8 */
+#define RCC_CFGR2_ADCPRE12_DIV10 ((uint32_t)0x00000150) /*!< ADC12 PLL clock divided by 10 */
+#define RCC_CFGR2_ADCPRE12_DIV12 ((uint32_t)0x00000160) /*!< ADC12 PLL clock divided by 12 */
+#define RCC_CFGR2_ADCPRE12_DIV16 ((uint32_t)0x00000170) /*!< ADC12 PLL clock divided by 16 */
+#define RCC_CFGR2_ADCPRE12_DIV32 ((uint32_t)0x00000180) /*!< ADC12 PLL clock divided by 32 */
+#define RCC_CFGR2_ADCPRE12_DIV64 ((uint32_t)0x00000190) /*!< ADC12 PLL clock divided by 64 */
+#define RCC_CFGR2_ADCPRE12_DIV128 ((uint32_t)0x000001A0) /*!< ADC12 PLL clock divided by 128 */
+#define RCC_CFGR2_ADCPRE12_DIV256 ((uint32_t)0x000001B0) /*!< ADC12 PLL clock divided by 256 */
+
+/*!< ADCPRE34 configuration */
+#define RCC_CFGR2_ADCPRE34 ((uint32_t)0x00003E00) /*!< ADCPRE34[13:5] bits */
+#define RCC_CFGR2_ADCPRE34_0 ((uint32_t)0x00000200) /*!< Bit 0 */
+#define RCC_CFGR2_ADCPRE34_1 ((uint32_t)0x00000400) /*!< Bit 1 */
+#define RCC_CFGR2_ADCPRE34_2 ((uint32_t)0x00000800) /*!< Bit 2 */
+#define RCC_CFGR2_ADCPRE34_3 ((uint32_t)0x00001000) /*!< Bit 3 */
+#define RCC_CFGR2_ADCPRE34_4 ((uint32_t)0x00002000) /*!< Bit 4 */
+
+#define RCC_CFGR2_ADCPRE34_NO ((uint32_t)0x00000000) /*!< ADC34 clock disabled, ADC34 can use AHB clock */
+#define RCC_CFGR2_ADCPRE34_DIV1 ((uint32_t)0x00002000) /*!< ADC34 PLL clock divided by 1 */
+#define RCC_CFGR2_ADCPRE34_DIV2 ((uint32_t)0x00002200) /*!< ADC34 PLL clock divided by 2 */
+#define RCC_CFGR2_ADCPRE34_DIV4 ((uint32_t)0x00002400) /*!< ADC34 PLL clock divided by 4 */
+#define RCC_CFGR2_ADCPRE34_DIV6 ((uint32_t)0x00002600) /*!< ADC34 PLL clock divided by 6 */
+#define RCC_CFGR2_ADCPRE34_DIV8 ((uint32_t)0x00002800) /*!< ADC34 PLL clock divided by 8 */
+#define RCC_CFGR2_ADCPRE34_DIV10 ((uint32_t)0x00002A00) /*!< ADC34 PLL clock divided by 10 */
+#define RCC_CFGR2_ADCPRE34_DIV12 ((uint32_t)0x00002C00) /*!< ADC34 PLL clock divided by 12 */
+#define RCC_CFGR2_ADCPRE34_DIV16 ((uint32_t)0x00002E00) /*!< ADC34 PLL clock divided by 16 */
+#define RCC_CFGR2_ADCPRE34_DIV32 ((uint32_t)0x00003000) /*!< ADC34 PLL clock divided by 32 */
+#define RCC_CFGR2_ADCPRE34_DIV64 ((uint32_t)0x00003200) /*!< ADC34 PLL clock divided by 64 */
+#define RCC_CFGR2_ADCPRE34_DIV128 ((uint32_t)0x00003400) /*!< ADC34 PLL clock divided by 128 */
+#define RCC_CFGR2_ADCPRE34_DIV256 ((uint32_t)0x00003600) /*!< ADC34 PLL clock divided by 256 */
+
+/******************* Bit definition for RCC_CFGR3 register ******************/
+#define RCC_CFGR3_USART1SW ((uint32_t)0x00000003) /*!< USART1SW[1:0] bits */
+#define RCC_CFGR3_USART1SW_0 ((uint32_t)0x00000001) /*!< Bit 0 */
+#define RCC_CFGR3_USART1SW_1 ((uint32_t)0x00000002) /*!< Bit 1 */
+
+#define RCC_CFGR3_I2CSW ((uint32_t)0x00000030) /*!< I2CSW bits */
+#define RCC_CFGR3_I2C1SW ((uint32_t)0x00000010) /*!< I2C1SW bits */
+#define RCC_CFGR3_I2C2SW ((uint32_t)0x00000020) /*!< I2C2SW bits */
+
+#define RCC_CFGR3_TIMSW ((uint32_t)0x00000300) /*!< TIMSW bits */
+#define RCC_CFGR3_TIM1SW ((uint32_t)0x00000100) /*!< TIM1SW bits */
+#define RCC_CFGR3_TIM8SW ((uint32_t)0x00000200) /*!< TIM8SW bits */
+
+#define RCC_CFGR3_USART2SW ((uint32_t)0x00030000) /*!< USART2SW[1:0] bits */
+#define RCC_CFGR3_USART2SW_0 ((uint32_t)0x00010000) /*!< Bit 0 */
+#define RCC_CFGR3_USART2SW_1 ((uint32_t)0x00020000) /*!< Bit 1 */
+
+#define RCC_CFGR3_USART3SW ((uint32_t)0x000C0000) /*!< USART3SW[1:0] bits */
+#define RCC_CFGR3_USART3SW_0 ((uint32_t)0x00040000) /*!< Bit 0 */
+#define RCC_CFGR3_USART3SW_1 ((uint32_t)0x00080000) /*!< Bit 1 */
+
+#define RCC_CFGR3_UART4SW ((uint32_t)0x00300000) /*!< UART4SW[1:0] bits */
+#define RCC_CFGR3_UART4SW_0 ((uint32_t)0x00100000) /*!< Bit 0 */
+#define RCC_CFGR3_UART4SW_1 ((uint32_t)0x00200000) /*!< Bit 1 */
+
+#define RCC_CFGR3_UART5SW ((uint32_t)0x00C00000) /*!< UART5SW[1:0] bits */
+#define RCC_CFGR3_UART5SW_0 ((uint32_t)0x00400000) /*!< Bit 0 */
+#define RCC_CFGR3_UART5SW_1 ((uint32_t)0x00800000) /*!< Bit 1 */
+
+/******************************************************************************/
+/* */
+/* Real-Time Clock (RTC) */
+/* */
+/******************************************************************************/
+/******************** Bits definition for RTC_TR register *******************/
+#define RTC_TR_PM ((uint32_t)0x00400000)
+#define RTC_TR_HT ((uint32_t)0x00300000)
+#define RTC_TR_HT_0 ((uint32_t)0x00100000)
+#define RTC_TR_HT_1 ((uint32_t)0x00200000)
+#define RTC_TR_HU ((uint32_t)0x000F0000)
+#define RTC_TR_HU_0 ((uint32_t)0x00010000)
+#define RTC_TR_HU_1 ((uint32_t)0x00020000)
+#define RTC_TR_HU_2 ((uint32_t)0x00040000)
+#define RTC_TR_HU_3 ((uint32_t)0x00080000)
+#define RTC_TR_MNT ((uint32_t)0x00007000)
+#define RTC_TR_MNT_0 ((uint32_t)0x00001000)
+#define RTC_TR_MNT_1 ((uint32_t)0x00002000)
+#define RTC_TR_MNT_2 ((uint32_t)0x00004000)
+#define RTC_TR_MNU ((uint32_t)0x00000F00)
+#define RTC_TR_MNU_0 ((uint32_t)0x00000100)
+#define RTC_TR_MNU_1 ((uint32_t)0x00000200)
+#define RTC_TR_MNU_2 ((uint32_t)0x00000400)
+#define RTC_TR_MNU_3 ((uint32_t)0x00000800)
+#define RTC_TR_ST ((uint32_t)0x00000070)
+#define RTC_TR_ST_0 ((uint32_t)0x00000010)
+#define RTC_TR_ST_1 ((uint32_t)0x00000020)
+#define RTC_TR_ST_2 ((uint32_t)0x00000040)
+#define RTC_TR_SU ((uint32_t)0x0000000F)
+#define RTC_TR_SU_0 ((uint32_t)0x00000001)
+#define RTC_TR_SU_1 ((uint32_t)0x00000002)
+#define RTC_TR_SU_2 ((uint32_t)0x00000004)
+#define RTC_TR_SU_3 ((uint32_t)0x00000008)
+
+/******************** Bits definition for RTC_DR register *******************/
+#define RTC_DR_YT ((uint32_t)0x00F00000)
+#define RTC_DR_YT_0 ((uint32_t)0x00100000)
+#define RTC_DR_YT_1 ((uint32_t)0x00200000)
+#define RTC_DR_YT_2 ((uint32_t)0x00400000)
+#define RTC_DR_YT_3 ((uint32_t)0x00800000)
+#define RTC_DR_YU ((uint32_t)0x000F0000)
+#define RTC_DR_YU_0 ((uint32_t)0x00010000)
+#define RTC_DR_YU_1 ((uint32_t)0x00020000)
+#define RTC_DR_YU_2 ((uint32_t)0x00040000)
+#define RTC_DR_YU_3 ((uint32_t)0x00080000)
+#define RTC_DR_WDU ((uint32_t)0x0000E000)
+#define RTC_DR_WDU_0 ((uint32_t)0x00002000)
+#define RTC_DR_WDU_1 ((uint32_t)0x00004000)
+#define RTC_DR_WDU_2 ((uint32_t)0x00008000)
+#define RTC_DR_MT ((uint32_t)0x00001000)
+#define RTC_DR_MU ((uint32_t)0x00000F00)
+#define RTC_DR_MU_0 ((uint32_t)0x00000100)
+#define RTC_DR_MU_1 ((uint32_t)0x00000200)
+#define RTC_DR_MU_2 ((uint32_t)0x00000400)
+#define RTC_DR_MU_3 ((uint32_t)0x00000800)
+#define RTC_DR_DT ((uint32_t)0x00000030)
+#define RTC_DR_DT_0 ((uint32_t)0x00000010)
+#define RTC_DR_DT_1 ((uint32_t)0x00000020)
+#define RTC_DR_DU ((uint32_t)0x0000000F)
+#define RTC_DR_DU_0 ((uint32_t)0x00000001)
+#define RTC_DR_DU_1 ((uint32_t)0x00000002)
+#define RTC_DR_DU_2 ((uint32_t)0x00000004)
+#define RTC_DR_DU_3 ((uint32_t)0x00000008)
+
+/******************** Bits definition for RTC_CR register *******************/
+#define RTC_CR_COE ((uint32_t)0x00800000)
+#define RTC_CR_OSEL ((uint32_t)0x00600000)
+#define RTC_CR_OSEL_0 ((uint32_t)0x00200000)
+#define RTC_CR_OSEL_1 ((uint32_t)0x00400000)
+#define RTC_CR_POL ((uint32_t)0x00100000)
+#define RTC_CR_COSEL ((uint32_t)0x00080000)
+#define RTC_CR_BCK ((uint32_t)0x00040000)
+#define RTC_CR_SUB1H ((uint32_t)0x00020000)
+#define RTC_CR_ADD1H ((uint32_t)0x00010000)
+#define RTC_CR_TSIE ((uint32_t)0x00008000)
+#define RTC_CR_WUTIE ((uint32_t)0x00004000)
+#define RTC_CR_ALRBIE ((uint32_t)0x00002000)
+#define RTC_CR_ALRAIE ((uint32_t)0x00001000)
+#define RTC_CR_TSE ((uint32_t)0x00000800)
+#define RTC_CR_WUTE ((uint32_t)0x00000400)
+#define RTC_CR_ALRBE ((uint32_t)0x00000200)
+#define RTC_CR_ALRAE ((uint32_t)0x00000100)
+#define RTC_CR_FMT ((uint32_t)0x00000040)
+#define RTC_CR_BYPSHAD ((uint32_t)0x00000020)
+#define RTC_CR_REFCKON ((uint32_t)0x00000010)
+#define RTC_CR_TSEDGE ((uint32_t)0x00000008)
+#define RTC_CR_WUCKSEL ((uint32_t)0x00000007)
+#define RTC_CR_WUCKSEL_0 ((uint32_t)0x00000001)
+#define RTC_CR_WUCKSEL_1 ((uint32_t)0x00000002)
+#define RTC_CR_WUCKSEL_2 ((uint32_t)0x00000004)
+
+/******************** Bits definition for RTC_ISR register ******************/
+#define RTC_ISR_RECALPF ((uint32_t)0x00010000)
+#define RTC_ISR_TAMP3F ((uint32_t)0x00008000)
+#define RTC_ISR_TAMP2F ((uint32_t)0x00004000)
+#define RTC_ISR_TAMP1F ((uint32_t)0x00002000)
+#define RTC_ISR_TSOVF ((uint32_t)0x00001000)
+#define RTC_ISR_TSF ((uint32_t)0x00000800)
+#define RTC_ISR_WUTF ((uint32_t)0x00000400)
+#define RTC_ISR_ALRBF ((uint32_t)0x00000200)
+#define RTC_ISR_ALRAF ((uint32_t)0x00000100)
+#define RTC_ISR_INIT ((uint32_t)0x00000080)
+#define RTC_ISR_INITF ((uint32_t)0x00000040)
+#define RTC_ISR_RSF ((uint32_t)0x00000020)
+#define RTC_ISR_INITS ((uint32_t)0x00000010)
+#define RTC_ISR_SHPF ((uint32_t)0x00000008)
+#define RTC_ISR_WUTWF ((uint32_t)0x00000004)
+#define RTC_ISR_ALRBWF ((uint32_t)0x00000002)
+#define RTC_ISR_ALRAWF ((uint32_t)0x00000001)
+
+/******************** Bits definition for RTC_PRER register *****************/
+#define RTC_PRER_PREDIV_A ((uint32_t)0x007F0000)
+#define RTC_PRER_PREDIV_S ((uint32_t)0x00007FFF)
+
+/******************** Bits definition for RTC_WUTR register *****************/
+#define RTC_WUTR_WUT ((uint32_t)0x0000FFFF)
+
+/******************** Bits definition for RTC_ALRMAR register ***************/
+#define RTC_ALRMAR_MSK4 ((uint32_t)0x80000000)
+#define RTC_ALRMAR_WDSEL ((uint32_t)0x40000000)
+#define RTC_ALRMAR_DT ((uint32_t)0x30000000)
+#define RTC_ALRMAR_DT_0 ((uint32_t)0x10000000)
+#define RTC_ALRMAR_DT_1 ((uint32_t)0x20000000)
+#define RTC_ALRMAR_DU ((uint32_t)0x0F000000)
+#define RTC_ALRMAR_DU_0 ((uint32_t)0x01000000)
+#define RTC_ALRMAR_DU_1 ((uint32_t)0x02000000)
+#define RTC_ALRMAR_DU_2 ((uint32_t)0x04000000)
+#define RTC_ALRMAR_DU_3 ((uint32_t)0x08000000)
+#define RTC_ALRMAR_MSK3 ((uint32_t)0x00800000)
+#define RTC_ALRMAR_PM ((uint32_t)0x00400000)
+#define RTC_ALRMAR_HT ((uint32_t)0x00300000)
+#define RTC_ALRMAR_HT_0 ((uint32_t)0x00100000)
+#define RTC_ALRMAR_HT_1 ((uint32_t)0x00200000)
+#define RTC_ALRMAR_HU ((uint32_t)0x000F0000)
+#define RTC_ALRMAR_HU_0 ((uint32_t)0x00010000)
+#define RTC_ALRMAR_HU_1 ((uint32_t)0x00020000)
+#define RTC_ALRMAR_HU_2 ((uint32_t)0x00040000)
+#define RTC_ALRMAR_HU_3 ((uint32_t)0x00080000)
+#define RTC_ALRMAR_MSK2 ((uint32_t)0x00008000)
+#define RTC_ALRMAR_MNT ((uint32_t)0x00007000)
+#define RTC_ALRMAR_MNT_0 ((uint32_t)0x00001000)
+#define RTC_ALRMAR_MNT_1 ((uint32_t)0x00002000)
+#define RTC_ALRMAR_MNT_2 ((uint32_t)0x00004000)
+#define RTC_ALRMAR_MNU ((uint32_t)0x00000F00)
+#define RTC_ALRMAR_MNU_0 ((uint32_t)0x00000100)
+#define RTC_ALRMAR_MNU_1 ((uint32_t)0x00000200)
+#define RTC_ALRMAR_MNU_2 ((uint32_t)0x00000400)
+#define RTC_ALRMAR_MNU_3 ((uint32_t)0x00000800)
+#define RTC_ALRMAR_MSK1 ((uint32_t)0x00000080)
+#define RTC_ALRMAR_ST ((uint32_t)0x00000070)
+#define RTC_ALRMAR_ST_0 ((uint32_t)0x00000010)
+#define RTC_ALRMAR_ST_1 ((uint32_t)0x00000020)
+#define RTC_ALRMAR_ST_2 ((uint32_t)0x00000040)
+#define RTC_ALRMAR_SU ((uint32_t)0x0000000F)
+#define RTC_ALRMAR_SU_0 ((uint32_t)0x00000001)
+#define RTC_ALRMAR_SU_1 ((uint32_t)0x00000002)
+#define RTC_ALRMAR_SU_2 ((uint32_t)0x00000004)
+#define RTC_ALRMAR_SU_3 ((uint32_t)0x00000008)
+
+/******************** Bits definition for RTC_ALRMBR register ***************/
+#define RTC_ALRMBR_MSK4 ((uint32_t)0x80000000)
+#define RTC_ALRMBR_WDSEL ((uint32_t)0x40000000)
+#define RTC_ALRMBR_DT ((uint32_t)0x30000000)
+#define RTC_ALRMBR_DT_0 ((uint32_t)0x10000000)
+#define RTC_ALRMBR_DT_1 ((uint32_t)0x20000000)
+#define RTC_ALRMBR_DU ((uint32_t)0x0F000000)
+#define RTC_ALRMBR_DU_0 ((uint32_t)0x01000000)
+#define RTC_ALRMBR_DU_1 ((uint32_t)0x02000000)
+#define RTC_ALRMBR_DU_2 ((uint32_t)0x04000000)
+#define RTC_ALRMBR_DU_3 ((uint32_t)0x08000000)
+#define RTC_ALRMBR_MSK3 ((uint32_t)0x00800000)
+#define RTC_ALRMBR_PM ((uint32_t)0x00400000)
+#define RTC_ALRMBR_HT ((uint32_t)0x00300000)
+#define RTC_ALRMBR_HT_0 ((uint32_t)0x00100000)
+#define RTC_ALRMBR_HT_1 ((uint32_t)0x00200000)
+#define RTC_ALRMBR_HU ((uint32_t)0x000F0000)
+#define RTC_ALRMBR_HU_0 ((uint32_t)0x00010000)
+#define RTC_ALRMBR_HU_1 ((uint32_t)0x00020000)
+#define RTC_ALRMBR_HU_2 ((uint32_t)0x00040000)
+#define RTC_ALRMBR_HU_3 ((uint32_t)0x00080000)
+#define RTC_ALRMBR_MSK2 ((uint32_t)0x00008000)
+#define RTC_ALRMBR_MNT ((uint32_t)0x00007000)
+#define RTC_ALRMBR_MNT_0 ((uint32_t)0x00001000)
+#define RTC_ALRMBR_MNT_1 ((uint32_t)0x00002000)
+#define RTC_ALRMBR_MNT_2 ((uint32_t)0x00004000)
+#define RTC_ALRMBR_MNU ((uint32_t)0x00000F00)
+#define RTC_ALRMBR_MNU_0 ((uint32_t)0x00000100)
+#define RTC_ALRMBR_MNU_1 ((uint32_t)0x00000200)
+#define RTC_ALRMBR_MNU_2 ((uint32_t)0x00000400)
+#define RTC_ALRMBR_MNU_3 ((uint32_t)0x00000800)
+#define RTC_ALRMBR_MSK1 ((uint32_t)0x00000080)
+#define RTC_ALRMBR_ST ((uint32_t)0x00000070)
+#define RTC_ALRMBR_ST_0 ((uint32_t)0x00000010)
+#define RTC_ALRMBR_ST_1 ((uint32_t)0x00000020)
+#define RTC_ALRMBR_ST_2 ((uint32_t)0x00000040)
+#define RTC_ALRMBR_SU ((uint32_t)0x0000000F)
+#define RTC_ALRMBR_SU_0 ((uint32_t)0x00000001)
+#define RTC_ALRMBR_SU_1 ((uint32_t)0x00000002)
+#define RTC_ALRMBR_SU_2 ((uint32_t)0x00000004)
+#define RTC_ALRMBR_SU_3 ((uint32_t)0x00000008)
+
+/******************** Bits definition for RTC_WPR register ******************/
+#define RTC_WPR_KEY ((uint32_t)0x000000FF)
+
+/******************** Bits definition for RTC_SSR register ******************/
+#define RTC_SSR_SS ((uint32_t)0x0000FFFF)
+
+/******************** Bits definition for RTC_SHIFTR register ***************/
+#define RTC_SHIFTR_SUBFS ((uint32_t)0x00007FFF)
+#define RTC_SHIFTR_ADD1S ((uint32_t)0x80000000)
+
+/******************** Bits definition for RTC_TSTR register *****************/
+#define RTC_TSTR_PM ((uint32_t)0x00400000)
+#define RTC_TSTR_HT ((uint32_t)0x00300000)
+#define RTC_TSTR_HT_0 ((uint32_t)0x00100000)
+#define RTC_TSTR_HT_1 ((uint32_t)0x00200000)
+#define RTC_TSTR_HU ((uint32_t)0x000F0000)
+#define RTC_TSTR_HU_0 ((uint32_t)0x00010000)
+#define RTC_TSTR_HU_1 ((uint32_t)0x00020000)
+#define RTC_TSTR_HU_2 ((uint32_t)0x00040000)
+#define RTC_TSTR_HU_3 ((uint32_t)0x00080000)
+#define RTC_TSTR_MNT ((uint32_t)0x00007000)
+#define RTC_TSTR_MNT_0 ((uint32_t)0x00001000)
+#define RTC_TSTR_MNT_1 ((uint32_t)0x00002000)
+#define RTC_TSTR_MNT_2 ((uint32_t)0x00004000)
+#define RTC_TSTR_MNU ((uint32_t)0x00000F00)
+#define RTC_TSTR_MNU_0 ((uint32_t)0x00000100)
+#define RTC_TSTR_MNU_1 ((uint32_t)0x00000200)
+#define RTC_TSTR_MNU_2 ((uint32_t)0x00000400)
+#define RTC_TSTR_MNU_3 ((uint32_t)0x00000800)
+#define RTC_TSTR_ST ((uint32_t)0x00000070)
+#define RTC_TSTR_ST_0 ((uint32_t)0x00000010)
+#define RTC_TSTR_ST_1 ((uint32_t)0x00000020)
+#define RTC_TSTR_ST_2 ((uint32_t)0x00000040)
+#define RTC_TSTR_SU ((uint32_t)0x0000000F)
+#define RTC_TSTR_SU_0 ((uint32_t)0x00000001)
+#define RTC_TSTR_SU_1 ((uint32_t)0x00000002)
+#define RTC_TSTR_SU_2 ((uint32_t)0x00000004)
+#define RTC_TSTR_SU_3 ((uint32_t)0x00000008)
+
+/******************** Bits definition for RTC_TSDR register *****************/
+#define RTC_TSDR_WDU ((uint32_t)0x0000E000)
+#define RTC_TSDR_WDU_0 ((uint32_t)0x00002000)
+#define RTC_TSDR_WDU_1 ((uint32_t)0x00004000)
+#define RTC_TSDR_WDU_2 ((uint32_t)0x00008000)
+#define RTC_TSDR_MT ((uint32_t)0x00001000)
+#define RTC_TSDR_MU ((uint32_t)0x00000F00)
+#define RTC_TSDR_MU_0 ((uint32_t)0x00000100)
+#define RTC_TSDR_MU_1 ((uint32_t)0x00000200)
+#define RTC_TSDR_MU_2 ((uint32_t)0x00000400)
+#define RTC_TSDR_MU_3 ((uint32_t)0x00000800)
+#define RTC_TSDR_DT ((uint32_t)0x00000030)
+#define RTC_TSDR_DT_0 ((uint32_t)0x00000010)
+#define RTC_TSDR_DT_1 ((uint32_t)0x00000020)
+#define RTC_TSDR_DU ((uint32_t)0x0000000F)
+#define RTC_TSDR_DU_0 ((uint32_t)0x00000001)
+#define RTC_TSDR_DU_1 ((uint32_t)0x00000002)
+#define RTC_TSDR_DU_2 ((uint32_t)0x00000004)
+#define RTC_TSDR_DU_3 ((uint32_t)0x00000008)
+
+/******************** Bits definition for RTC_TSSSR register ****************/
+#define RTC_TSSSR_SS ((uint32_t)0x0000FFFF)
+
+/******************** Bits definition for RTC_CAL register *****************/
+#define RTC_CALR_CALP ((uint32_t)0x00008000)
+#define RTC_CALR_CALW8 ((uint32_t)0x00004000)
+#define RTC_CALR_CALW16 ((uint32_t)0x00002000)
+#define RTC_CALR_CALM ((uint32_t)0x000001FF)
+#define RTC_CALR_CALM_0 ((uint32_t)0x00000001)
+#define RTC_CALR_CALM_1 ((uint32_t)0x00000002)
+#define RTC_CALR_CALM_2 ((uint32_t)0x00000004)
+#define RTC_CALR_CALM_3 ((uint32_t)0x00000008)
+#define RTC_CALR_CALM_4 ((uint32_t)0x00000010)
+#define RTC_CALR_CALM_5 ((uint32_t)0x00000020)
+#define RTC_CALR_CALM_6 ((uint32_t)0x00000040)
+#define RTC_CALR_CALM_7 ((uint32_t)0x00000080)
+#define RTC_CALR_CALM_8 ((uint32_t)0x00000100)
+
+/******************** Bits definition for RTC_TAFCR register ****************/
+#define RTC_TAFCR_ALARMOUTTYPE ((uint32_t)0x00040000)
+#define RTC_TAFCR_TAMPPUDIS ((uint32_t)0x00008000)
+#define RTC_TAFCR_TAMPPRCH ((uint32_t)0x00006000)
+#define RTC_TAFCR_TAMPPRCH_0 ((uint32_t)0x00002000)
+#define RTC_TAFCR_TAMPPRCH_1 ((uint32_t)0x00004000)
+#define RTC_TAFCR_TAMPFLT ((uint32_t)0x00001800)
+#define RTC_TAFCR_TAMPFLT_0 ((uint32_t)0x00000800)
+#define RTC_TAFCR_TAMPFLT_1 ((uint32_t)0x00001000)
+#define RTC_TAFCR_TAMPFREQ ((uint32_t)0x00000700)
+#define RTC_TAFCR_TAMPFREQ_0 ((uint32_t)0x00000100)
+#define RTC_TAFCR_TAMPFREQ_1 ((uint32_t)0x00000200)
+#define RTC_TAFCR_TAMPFREQ_2 ((uint32_t)0x00000400)
+#define RTC_TAFCR_TAMPTS ((uint32_t)0x00000080)
+#define RTC_TAFCR_TAMP3TRG ((uint32_t)0x00000040)
+#define RTC_TAFCR_TAMP3E ((uint32_t)0x00000020)
+#define RTC_TAFCR_TAMP2TRG ((uint32_t)0x00000010)
+#define RTC_TAFCR_TAMP2E ((uint32_t)0x00000008)
+#define RTC_TAFCR_TAMPIE ((uint32_t)0x00000004)
+#define RTC_TAFCR_TAMP1TRG ((uint32_t)0x00000002)
+#define RTC_TAFCR_TAMP1E ((uint32_t)0x00000001)
+
+/******************** Bits definition for RTC_ALRMASSR register *************/
+#define RTC_ALRMASSR_MASKSS ((uint32_t)0x0F000000)
+#define RTC_ALRMASSR_MASKSS_0 ((uint32_t)0x01000000)
+#define RTC_ALRMASSR_MASKSS_1 ((uint32_t)0x02000000)
+#define RTC_ALRMASSR_MASKSS_2 ((uint32_t)0x04000000)
+#define RTC_ALRMASSR_MASKSS_3 ((uint32_t)0x08000000)
+#define RTC_ALRMASSR_SS ((uint32_t)0x00007FFF)
+
+/******************** Bits definition for RTC_ALRMBSSR register *************/
+#define RTC_ALRMBSSR_MASKSS ((uint32_t)0x0F000000)
+#define RTC_ALRMBSSR_MASKSS_0 ((uint32_t)0x01000000)
+#define RTC_ALRMBSSR_MASKSS_1 ((uint32_t)0x02000000)
+#define RTC_ALRMBSSR_MASKSS_2 ((uint32_t)0x04000000)
+#define RTC_ALRMBSSR_MASKSS_3 ((uint32_t)0x08000000)
+#define RTC_ALRMBSSR_SS ((uint32_t)0x00007FFF)
+
+/******************** Bits definition for RTC_BKP0R register ****************/
+#define RTC_BKP0R ((uint32_t)0xFFFFFFFF)
+
+/******************** Bits definition for RTC_BKP1R register ****************/
+#define RTC_BKP1R ((uint32_t)0xFFFFFFFF)
+
+/******************** Bits definition for RTC_BKP2R register ****************/
+#define RTC_BKP2R ((uint32_t)0xFFFFFFFF)
+
+/******************** Bits definition for RTC_BKP3R register ****************/
+#define RTC_BKP3R ((uint32_t)0xFFFFFFFF)
+
+/******************** Bits definition for RTC_BKP4R register ****************/
+#define RTC_BKP4R ((uint32_t)0xFFFFFFFF)
+
+/******************** Bits definition for RTC_BKP5R register ****************/
+#define RTC_BKP5R ((uint32_t)0xFFFFFFFF)
+
+/******************** Bits definition for RTC_BKP6R register ****************/
+#define RTC_BKP6R ((uint32_t)0xFFFFFFFF)
+
+/******************** Bits definition for RTC_BKP7R register ****************/
+#define RTC_BKP7R ((uint32_t)0xFFFFFFFF)
+
+/******************** Bits definition for RTC_BKP8R register ****************/
+#define RTC_BKP8R ((uint32_t)0xFFFFFFFF)
+
+/******************** Bits definition for RTC_BKP9R register ****************/
+#define RTC_BKP9R ((uint32_t)0xFFFFFFFF)
+
+/******************** Bits definition for RTC_BKP10R register ***************/
+#define RTC_BKP10R ((uint32_t)0xFFFFFFFF)
+
+/******************** Bits definition for RTC_BKP11R register ***************/
+#define RTC_BKP11R ((uint32_t)0xFFFFFFFF)
+
+/******************** Bits definition for RTC_BKP12R register ***************/
+#define RTC_BKP12R ((uint32_t)0xFFFFFFFF)
+
+/******************** Bits definition for RTC_BKP13R register ***************/
+#define RTC_BKP13R ((uint32_t)0xFFFFFFFF)
+
+/******************** Bits definition for RTC_BKP14R register ***************/
+#define RTC_BKP14R ((uint32_t)0xFFFFFFFF)
+
+/******************** Bits definition for RTC_BKP15R register ***************/
+#define RTC_BKP15R ((uint32_t)0xFFFFFFFF)
+
+/******************************************************************************/
+/* */
+/* Serial Peripheral Interface (SPI) */
+/* */
+/******************************************************************************/
+/******************* Bit definition for SPI_CR1 register ********************/
+#define SPI_CR1_CPHA ((uint16_t)0x0001) /*!< Clock Phase */
+#define SPI_CR1_CPOL ((uint16_t)0x0002) /*!< Clock Polarity */
+#define SPI_CR1_MSTR ((uint16_t)0x0004) /*!< Master Selection */
+
+#define SPI_CR1_BR ((uint16_t)0x0038) /*!< BR[2:0] bits (Baud Rate Control) */
+#define SPI_CR1_BR_0 ((uint16_t)0x0008) /*!< Bit 0 */
+#define SPI_CR1_BR_1 ((uint16_t)0x0010) /*!< Bit 1 */
+#define SPI_CR1_BR_2 ((uint16_t)0x0020) /*!< Bit 2 */
+
+#define SPI_CR1_SPE ((uint16_t)0x0040) /*!< SPI Enable */
+#define SPI_CR1_LSBFIRST ((uint16_t)0x0080) /*!< Frame Format */
+#define SPI_CR1_SSI ((uint16_t)0x0100) /*!< Internal slave select */
+#define SPI_CR1_SSM ((uint16_t)0x0200) /*!< Software slave management */
+#define SPI_CR1_RXONLY ((uint16_t)0x0400) /*!< Receive only */
+#define SPI_CR1_CRCL ((uint16_t)0x0800) /*!< CRC Length */
+#define SPI_CR1_CRCNEXT ((uint16_t)0x1000) /*!< Transmit CRC next */
+#define SPI_CR1_CRCEN ((uint16_t)0x2000) /*!< Hardware CRC calculation enable */
+#define SPI_CR1_BIDIOE ((uint16_t)0x4000) /*!< Output enable in bidirectional mode */
+#define SPI_CR1_BIDIMODE ((uint16_t)0x8000) /*!< Bidirectional data mode enable */
+
+/******************* Bit definition for SPI_CR2 register ********************/
+#define SPI_CR2_RXDMAEN ((uint16_t)0x0001) /*!< Rx Buffer DMA Enable */
+#define SPI_CR2_TXDMAEN ((uint16_t)0x0002) /*!< Tx Buffer DMA Enable */
+#define SPI_CR2_SSOE ((uint16_t)0x0004) /*!< SS Output Enable */
+#define SPI_CR2_NSSP ((uint16_t)0x0008) /*!< NSS pulse management Enable */
+#define SPI_CR2_FRF ((uint16_t)0x0010) /*!< Frame Format Enable */
+#define SPI_CR2_ERRIE ((uint16_t)0x0020) /*!< Error Interrupt Enable */
+#define SPI_CR2_RXNEIE ((uint16_t)0x0040) /*!< RX buffer Not Empty Interrupt Enable */
+#define SPI_CR2_TXEIE ((uint16_t)0x0080) /*!< Tx buffer Empty Interrupt Enable */
+
+#define SPI_CR2_DS ((uint16_t)0x0F00) /*!< DS[3:0] Data Size */
+#define SPI_CR2_DS_0 ((uint16_t)0x0100) /*!< Bit 0 */
+#define SPI_CR2_DS_1 ((uint16_t)0x0200) /*!< Bit 1 */
+#define SPI_CR2_DS_2 ((uint16_t)0x0400) /*!< Bit 2 */
+#define SPI_CR2_DS_3 ((uint16_t)0x0800) /*!< Bit 3 */
+
+#define SPI_CR2_FRXTH ((uint16_t)0x1000) /*!< FIFO reception Threshold */
+#define SPI_CR2_LDMARX ((uint16_t)0x2000) /*!< Last DMA transfer for reception */
+#define SPI_CR2_LDMATX ((uint16_t)0x4000) /*!< Last DMA transfer for transmission */
+
+/******************** Bit definition for SPI_SR register ********************/
+#define SPI_SR_RXNE ((uint16_t)0x0001) /*!< Receive buffer Not Empty */
+#define SPI_SR_TXE ((uint16_t)0x0002) /*!< Transmit buffer Empty */
+#define SPI_SR_CRCERR ((uint16_t)0x0010) /*!< CRC Error flag */
+#define SPI_SR_MODF ((uint16_t)0x0020) /*!< Mode fault */
+#define SPI_SR_OVR ((uint16_t)0x0040) /*!< Overrun flag */
+#define SPI_SR_BSY ((uint16_t)0x0080) /*!< Busy flag */
+#define SPI_SR_FRE ((uint16_t)0x0100) /*!< TI frame format error */
+#define SPI_SR_FRLVL ((uint16_t)0x0600) /*!< FIFO Reception Level */
+#define SPI_SR_FRLVL_0 ((uint16_t)0x0200) /*!< Bit 0 */
+#define SPI_SR_FRLVL_1 ((uint16_t)0x0400) /*!< Bit 1 */
+#define SPI_SR_FTLVL ((uint16_t)0x1800) /*!< FIFO Transmission Level */
+#define SPI_SR_FTLVL_0 ((uint16_t)0x0800) /*!< Bit 0 */
+#define SPI_SR_FTLVL_1 ((uint16_t)0x1000) /*!< Bit 1 */
+
+/******************** Bit definition for SPI_DR register ********************/
+#define SPI_DR_DR ((uint16_t)0xFFFF) /*!< Data Register */
+
+/******************* Bit definition for SPI_CRCPR register ******************/
+#define SPI_CRCPR_CRCPOLY ((uint16_t)0xFFFF) /*!< CRC polynomial register */
+
+/****************** Bit definition for SPI_RXCRCR register ******************/
+#define SPI_RXCRCR_RXCRC ((uint16_t)0xFFFF) /*!< Rx CRC Register */
+
+/****************** Bit definition for SPI_TXCRCR register ******************/
+#define SPI_TXCRCR_TXCRC ((uint16_t)0xFFFF) /*!< Tx CRC Register */
+
+/****************** Bit definition for SPI_I2SCFGR register *****************/
+#define SPI_I2SCFGR_CHLEN ((uint16_t)0x0001) /*!<Channel length (number of bits per audio channel) */
+
+#define SPI_I2SCFGR_DATLEN ((uint16_t)0x0006) /*!<DATLEN[1:0] bits (Data length to be transferred) */
+#define SPI_I2SCFGR_DATLEN_0 ((uint16_t)0x0002) /*!<Bit 0 */
+#define SPI_I2SCFGR_DATLEN_1 ((uint16_t)0x0004) /*!<Bit 1 */
+
+#define SPI_I2SCFGR_CKPOL ((uint16_t)0x0008) /*!<steady state clock polarity */
+
+#define SPI_I2SCFGR_I2SSTD ((uint16_t)0x0030) /*!<I2SSTD[1:0] bits (I2S standard selection) */
+#define SPI_I2SCFGR_I2SSTD_0 ((uint16_t)0x0010) /*!<Bit 0 */
+#define SPI_I2SCFGR_I2SSTD_1 ((uint16_t)0x0020) /*!<Bit 1 */
+
+#define SPI_I2SCFGR_PCMSYNC ((uint16_t)0x0080) /*!<PCM frame synchronization */
+
+#define SPI_I2SCFGR_I2SCFG ((uint16_t)0x0300) /*!<I2SCFG[1:0] bits (I2S configuration mode) */
+#define SPI_I2SCFGR_I2SCFG_0 ((uint16_t)0x0100) /*!<Bit 0 */
+#define SPI_I2SCFGR_I2SCFG_1 ((uint16_t)0x0200) /*!<Bit 1 */
+
+#define SPI_I2SCFGR_I2SE ((uint16_t)0x0400) /*!<I2S Enable */
+#define SPI_I2SCFGR_I2SMOD ((uint16_t)0x0800) /*!<I2S mode selection */
+
+/****************** Bit definition for SPI_I2SPR register *******************/
+#define SPI_I2SPR_I2SDIV ((uint16_t)0x00FF) /*!<I2S Linear prescaler */
+#define SPI_I2SPR_ODD ((uint16_t)0x0100) /*!<Odd factor for the prescaler */
+#define SPI_I2SPR_MCKOE ((uint16_t)0x0200) /*!<Master Clock Output Enable */
+
+/******************************************************************************/
+/* */
+/* System Configuration(SYSCFG) */
+/* */
+/******************************************************************************/
+/***************** Bit definition for SYSCFG_CFGR1 register *****************/
+#define SYSCFG_CFGR1_MEM_MODE ((uint32_t)0x00000003) /*!< SYSCFG_Memory Remap Config */
+#define SYSCFG_CFGR1_MEM_MODE_0 ((uint32_t)0x00000001) /*!< Bit 0 */
+#define SYSCFG_CFGR1_MEM_MODE_1 ((uint32_t)0x00000002) /*!< Bit 1 */
+#define SYSCFG_CFGR1_USB_IT_RMP ((uint32_t)0x00000020) /*!< USB interrupt remap */
+#define SYSCFG_CFGR1_TIM1_ITR3_RMP ((uint32_t)0x00000040) /*!< Timer 1 ITR3 selection */
+#define SYSCFG_CFGR1_DAC_TRIG_RMP ((uint32_t)0x00000080) /*!< DAC Trigger remap */
+#define SYSCFG_CFGR1_ADC24_DMA_RMP ((uint32_t)0x00000100) /*!< ADC2 and ADC4 DMA remap */
+#define SYSCFG_CFGR1_TIM16_DMA_RMP ((uint32_t)0x00000800) /*!< Timer 16 DMA remap */
+#define SYSCFG_CFGR1_TIM17_DMA_RMP ((uint32_t)0x00001000) /*!< Timer 17 DMA remap */
+#define SYSCFG_CFGR1_TIM6DAC1_DMA_RMP ((uint32_t)0x00002000) /*!< Timer 6 / DAC1 DMA remap */
+#define SYSCFG_CFGR1_TIM7DAC2_DMA_RMP ((uint32_t)0x00004000) /*!< Timer 7 / DAC2 DMA remap */
+#define SYSCFG_CFGR1_I2C_PB6_FMP ((uint32_t)0x00010000) /*!< I2C PB6 Fast mode plus */
+#define SYSCFG_CFGR1_I2C_PB7_FMP ((uint32_t)0x00020000) /*!< I2C PB7 Fast mode plus */
+#define SYSCFG_CFGR1_I2C_PB8_FMP ((uint32_t)0x00040000) /*!< I2C PB8 Fast mode plus */
+#define SYSCFG_CFGR1_I2C_PB9_FMP ((uint32_t)0x00080000) /*!< I2C PB9 Fast mode plus */
+#define SYSCFG_CFGR1_I2C1_FMP ((uint32_t)0x00100000) /*!< I2C1 Fast mode plus */
+#define SYSCFG_CFGR1_I2C2_FMP ((uint32_t)0x00200000) /*!< I2C2 Fast mode plus */
+#define SYSCFG_CFGR1_ENCODER_MODE ((uint32_t)0x00C00000) /*!< Encoder Mode */
+#define SYSCFG_CFGR1_ENCODER_MODE_0 ((uint32_t)0x00400000) /*!< Encoder Mode 0 */
+#define SYSCFG_CFGR1_ENCODER_MODE_1 ((uint32_t)0x00800000) /*!< Encoder Mode 1 */
+#define SYSCFG_CFGR1_FPU_IE ((uint32_t)0xFC000000) /*!< Floating Point Unit Interrupt Enable */
+#define SYSCFG_CFGR1_FPU_IE_0 ((uint32_t)0x04000000) /*!< Floating Point Unit Interrupt Enable 0 */
+#define SYSCFG_CFGR1_FPU_IE_1 ((uint32_t)0x08000000) /*!< Floating Point Unit Interrupt Enable 1 */
+#define SYSCFG_CFGR1_FPU_IE_2 ((uint32_t)0x10000000) /*!< Floating Point Unit Interrupt Enable 2 */
+#define SYSCFG_CFGR1_FPU_IE_3 ((uint32_t)0x20000000) /*!< Floating Point Unit Interrupt Enable 3 */
+#define SYSCFG_CFGR1_FPU_IE_4 ((uint32_t)0x40000000) /*!< Floating Point Unit Interrupt Enable 4 */
+#define SYSCFG_CFGR1_FPU_IE_5 ((uint32_t)0x80000000) /*!< Floating Point Unit Interrupt Enable 5 */
+
+/***************** Bit definition for SYSCFG_RCR register *******************/
+#define SYSCFG_RCR_PAGE0 ((uint32_t)0x00000001) /*!< ICODE SRAM Write protection page 0 */
+#define SYSCFG_RCR_PAGE1 ((uint32_t)0x00000002) /*!< ICODE SRAM Write protection page 1 */
+#define SYSCFG_RCR_PAGE2 ((uint32_t)0x00000004) /*!< ICODE SRAM Write protection page 2 */
+#define SYSCFG_RCR_PAGE3 ((uint32_t)0x00000008) /*!< ICODE SRAM Write protection page 3 */
+#define SYSCFG_RCR_PAGE4 ((uint32_t)0x00000010) /*!< ICODE SRAM Write protection page 4 */
+#define SYSCFG_RCR_PAGE5 ((uint32_t)0x00000020) /*!< ICODE SRAM Write protection page 5 */
+#define SYSCFG_RCR_PAGE6 ((uint32_t)0x00000040) /*!< ICODE SRAM Write protection page 6 */
+#define SYSCFG_RCR_PAGE7 ((uint32_t)0x00000080) /*!< ICODE SRAM Write protection page 7 */
+
+/***************** Bit definition for SYSCFG_EXTICR1 register ***************/
+#define SYSCFG_EXTICR1_EXTI0 ((uint16_t)0x000F) /*!< EXTI 0 configuration */
+#define SYSCFG_EXTICR1_EXTI1 ((uint16_t)0x00F0) /*!< EXTI 1 configuration */
+#define SYSCFG_EXTICR1_EXTI2 ((uint16_t)0x0F00) /*!< EXTI 2 configuration */
+#define SYSCFG_EXTICR1_EXTI3 ((uint16_t)0xF000) /*!< EXTI 3 configuration */
+
+/**
+ * @brief EXTI0 configuration
+ */
+#define SYSCFG_EXTICR1_EXTI0_PA ((uint16_t)0x0000) /*!< PA[0] pin */
+#define SYSCFG_EXTICR1_EXTI0_PB ((uint16_t)0x0001) /*!< PB[0] pin */
+#define SYSCFG_EXTICR1_EXTI0_PC ((uint16_t)0x0002) /*!< PC[0] pin */
+#define SYSCFG_EXTICR1_EXTI0_PD ((uint16_t)0x0003) /*!< PD[0] pin */
+#define SYSCFG_EXTICR1_EXTI0_PE ((uint16_t)0x0004) /*!< PE[0] pin */
+#define SYSCFG_EXTICR1_EXTI0_PF ((uint16_t)0x0005) /*!< PF[0] pin */
+
+/**
+ * @brief EXTI1 configuration
+ */
+#define SYSCFG_EXTICR1_EXTI1_PA ((uint16_t)0x0000) /*!< PA[1] pin */
+#define SYSCFG_EXTICR1_EXTI1_PB ((uint16_t)0x0010) /*!< PB[1] pin */
+#define SYSCFG_EXTICR1_EXTI1_PC ((uint16_t)0x0020) /*!< PC[1] pin */
+#define SYSCFG_EXTICR1_EXTI1_PD ((uint16_t)0x0030) /*!< PD[1] pin */
+#define SYSCFG_EXTICR1_EXTI1_PE ((uint16_t)0x0040) /*!< PE[1] pin */
+#define SYSCFG_EXTICR1_EXTI1_PF ((uint16_t)0x0050) /*!< PF[1] pin */
+
+/**
+ * @brief EXTI2 configuration
+ */
+#define SYSCFG_EXTICR1_EXTI2_PA ((uint16_t)0x0000) /*!< PA[2] pin */
+#define SYSCFG_EXTICR1_EXTI2_PB ((uint16_t)0x0100) /*!< PB[2] pin */
+#define SYSCFG_EXTICR1_EXTI2_PC ((uint16_t)0x0200) /*!< PC[2] pin */
+#define SYSCFG_EXTICR1_EXTI2_PD ((uint16_t)0x0300) /*!< PD[2] pin */
+#define SYSCFG_EXTICR1_EXTI2_PE ((uint16_t)0x0400) /*!< PE[2] pin */
+#define SYSCFG_EXTICR1_EXTI2_PF ((uint16_t)0x0500) /*!< PF[2] pin */
+
+/**
+ * @brief EXTI3 configuration
+ */
+#define SYSCFG_EXTICR1_EXTI3_PA ((uint16_t)0x0000) /*!< PA[3] pin */
+#define SYSCFG_EXTICR1_EXTI3_PB ((uint16_t)0x1000) /*!< PB[3] pin */
+#define SYSCFG_EXTICR1_EXTI3_PC ((uint16_t)0x2000) /*!< PC[3] pin */
+#define SYSCFG_EXTICR1_EXTI3_PD ((uint16_t)0x3000) /*!< PD[3] pin */
+#define SYSCFG_EXTICR1_EXTI3_PE ((uint16_t)0x4000) /*!< PE[3] pin */
+
+/***************** Bit definition for SYSCFG_EXTICR2 register ***************/
+#define SYSCFG_EXTIRCR_EXTI4 ((uint16_t)0x000F) /*!< EXTI 4 configuration */
+#define SYSCFG_EXTIRCR_EXTI5 ((uint16_t)0x00F0) /*!< EXTI 5 configuration */
+#define SYSCFG_EXTIRCR_EXTI6 ((uint16_t)0x0F00) /*!< EXTI 6 configuration */
+#define SYSCFG_EXTIRCR_EXTI7 ((uint16_t)0xF000) /*!< EXTI 7 configuration */
+
+/**
+ * @brief EXTI4 configuration
+ */
+#define SYSCFG_EXTIRCR_EXTI4_PA ((uint16_t)0x0000) /*!< PA[4] pin */
+#define SYSCFG_EXTIRCR_EXTI4_PB ((uint16_t)0x0001) /*!< PB[4] pin */
+#define SYSCFG_EXTIRCR_EXTI4_PC ((uint16_t)0x0002) /*!< PC[4] pin */
+#define SYSCFG_EXTIRCR_EXTI4_PD ((uint16_t)0x0003) /*!< PD[4] pin */
+#define SYSCFG_EXTIRCR_EXTI4_PE ((uint16_t)0x0004) /*!< PE[4] pin */
+#define SYSCFG_EXTIRCR_EXTI4_PF ((uint16_t)0x0005) /*!< PF[4] pin */
+
+/**
+ * @brief EXTI5 configuration
+ */
+#define SYSCFG_EXTIRCR_EXTI5_PA ((uint16_t)0x0000) /*!< PA[5] pin */
+#define SYSCFG_EXTIRCR_EXTI5_PB ((uint16_t)0x0010) /*!< PB[5] pin */
+#define SYSCFG_EXTIRCR_EXTI5_PC ((uint16_t)0x0020) /*!< PC[5] pin */
+#define SYSCFG_EXTIRCR_EXTI5_PD ((uint16_t)0x0030) /*!< PD[5] pin */
+#define SYSCFG_EXTIRCR_EXTI5_PE ((uint16_t)0x0040) /*!< PE[5] pin */
+#define SYSCFG_EXTIRCR_EXTI5_PF ((uint16_t)0x0050) /*!< PF[5] pin */
+
+/**
+ * @brief EXTI6 configuration
+ */
+#define SYSCFG_EXTIRCR_EXTI6_PA ((uint16_t)0x0000) /*!< PA[6] pin */
+#define SYSCFG_EXTIRCR_EXTI6_PB ((uint16_t)0x0100) /*!< PB[6] pin */
+#define SYSCFG_EXTIRCR_EXTI6_PC ((uint16_t)0x0200) /*!< PC[6] pin */
+#define SYSCFG_EXTIRCR_EXTI6_PD ((uint16_t)0x0300) /*!< PD[6] pin */
+#define SYSCFG_EXTIRCR_EXTI6_PE ((uint16_t)0x0400) /*!< PE[6] pin */
+#define SYSCFG_EXTIRCR_EXTI6_PF ((uint16_t)0x0500) /*!< PF[6] pin */
+
+/**
+ * @brief EXTI7 configuration
+ */
+#define SYSCFG_EXTIRCR_EXTI7_PA ((uint16_t)0x0000) /*!< PA[7] pin */
+#define SYSCFG_EXTIRCR_EXTI7_PB ((uint16_t)0x1000) /*!< PB[7] pin */
+#define SYSCFG_EXTIRCR_EXTI7_PC ((uint16_t)0x2000) /*!< PC[7] pin */
+#define SYSCFG_EXTIRCR_EXTI7_PD ((uint16_t)0x3000) /*!< PD[7] pin */
+#define SYSCFG_EXTIRCR_EXTI7_PE ((uint16_t)0x4000) /*!< PE[7] pin */
+
+/***************** Bit definition for SYSCFG_EXTICR3 register ***************/
+#define SYSCFG_EXTICR3_EXTI8 ((uint16_t)0x000F) /*!< EXTI 8 configuration */
+#define SYSCFG_EXTICR3_EXTI9 ((uint16_t)0x00F0) /*!< EXTI 9 configuration */
+#define SYSCFG_EXTICR3_EXTI10 ((uint16_t)0x0F00) /*!< EXTI 10 configuration */
+#define SYSCFG_EXTICR3_EXTI11 ((uint16_t)0xF000) /*!< EXTI 11 configuration */
+
+/**
+ * @brief EXTI8 configuration
+ */
+#define SYSCFG_EXTICR3_EXTI8_PA ((uint16_t)0x0000) /*!< PA[8] pin */
+#define SYSCFG_EXTICR3_EXTI8_PB ((uint16_t)0x0001) /*!< PB[8] pin */
+#define SYSCFG_EXTICR3_EXTI8_PC ((uint16_t)0x0002) /*!< PC[8] pin */
+#define SYSCFG_EXTICR3_EXTI8_PD ((uint16_t)0x0003) /*!< PD[8] pin */
+#define SYSCFG_EXTICR3_EXTI8_PE ((uint16_t)0x0004) /*!< PE[8] pin */
+
+/**
+ * @brief EXTI9 configuration
+ */
+#define SYSCFG_EXTICR3_EXTI9_PA ((uint16_t)0x0000) /*!< PA[9] pin */
+#define SYSCFG_EXTICR3_EXTI9_PB ((uint16_t)0x0010) /*!< PB[9] pin */
+#define SYSCFG_EXTICR3_EXTI9_PC ((uint16_t)0x0020) /*!< PC[9] pin */
+#define SYSCFG_EXTICR3_EXTI9_PD ((uint16_t)0x0030) /*!< PD[9] pin */
+#define SYSCFG_EXTICR3_EXTI9_PE ((uint16_t)0x0040) /*!< PE[9] pin */
+#define SYSCFG_EXTICR3_EXTI9_PF ((uint16_t)0x0050) /*!< PF[9] pin */
+
+/**
+ * @brief EXTI10 configuration
+ */
+#define SYSCFG_EXTICR3_EXTI10_PA ((uint16_t)0x0000) /*!< PA[10] pin */
+#define SYSCFG_EXTICR3_EXTI10_PB ((uint16_t)0x0100) /*!< PB[10] pin */
+#define SYSCFG_EXTICR3_EXTI10_PC ((uint16_t)0x0200) /*!< PC[10] pin */
+#define SYSCFG_EXTICR3_EXTI10_PD ((uint16_t)0x0300) /*!< PD[10] pin */
+#define SYSCFG_EXTICR3_EXTI10_PE ((uint16_t)0x0400) /*!< PE[10] pin */
+#define SYSCFG_EXTICR3_EXTI10_PF ((uint16_t)0x0500) /*!< PF[10] pin */
+
+/**
+ * @brief EXTI11 configuration
+ */
+#define SYSCFG_EXTICR3_EXTI11_PA ((uint16_t)0x0000) /*!< PA[11] pin */
+#define SYSCFG_EXTICR3_EXTI11_PB ((uint16_t)0x1000) /*!< PB[11] pin */
+#define SYSCFG_EXTICR3_EXTI11_PC ((uint16_t)0x2000) /*!< PC[11] pin */
+#define SYSCFG_EXTICR3_EXTI11_PD ((uint16_t)0x3000) /*!< PD[11] pin */
+#define SYSCFG_EXTICR3_EXTI11_PE ((uint16_t)0x4000) /*!< PE[11] pin */
+
+/***************** Bit definition for SYSCFG_EXTICR4 register *****************/
+#define SYSCFG_EXTICR4_EXTI12 ((uint16_t)0x000F) /*!< EXTI 12 configuration */
+#define SYSCFG_EXTICR4_EXTI13 ((uint16_t)0x00F0) /*!< EXTI 13 configuration */
+#define SYSCFG_EXTICR4_EXTI14 ((uint16_t)0x0F00) /*!< EXTI 14 configuration */
+#define SYSCFG_EXTICR4_EXTI15 ((uint16_t)0xF000) /*!< EXTI 15 configuration */
+
+/**
+ * @brief EXTI12 configuration
+ */
+#define SYSCFG_EXTICR4_EXTI12_PA ((uint16_t)0x0000) /*!< PA[12] pin */
+#define SYSCFG_EXTICR4_EXTI12_PB ((uint16_t)0x0001) /*!< PB[12] pin */
+#define SYSCFG_EXTICR4_EXTI12_PC ((uint16_t)0x0002) /*!< PC[12] pin */
+#define SYSCFG_EXTICR4_EXTI12_PD ((uint16_t)0x0003) /*!< PD[12] pin */
+#define SYSCFG_EXTICR4_EXTI12_PE ((uint16_t)0x0004) /*!< PE[12] pin */
+
+/**
+ * @brief EXTI13 configuration
+ */
+#define SYSCFG_EXTICR4_EXTI13_PA ((uint16_t)0x0000) /*!< PA[13] pin */
+#define SYSCFG_EXTICR4_EXTI13_PB ((uint16_t)0x0010) /*!< PB[13] pin */
+#define SYSCFG_EXTICR4_EXTI13_PC ((uint16_t)0x0020) /*!< PC[13] pin */
+#define SYSCFG_EXTICR4_EXTI13_PD ((uint16_t)0x0030) /*!< PD[13] pin */
+#define SYSCFG_EXTICR4_EXTI13_PE ((uint16_t)0x0040) /*!< PE[13] pin */
+
+/**
+ * @brief EXTI14 configuration
+ */
+#define SYSCFG_EXTICR4_EXTI14_PA ((uint16_t)0x0000) /*!< PA[14] pin */
+#define SYSCFG_EXTICR4_EXTI14_PB ((uint16_t)0x0100) /*!< PB[14] pin */
+#define SYSCFG_EXTICR4_EXTI14_PC ((uint16_t)0x0200) /*!< PC[14] pin */
+#define SYSCFG_EXTICR4_EXTI14_PD ((uint16_t)0x0300) /*!< PD[14] pin */
+#define SYSCFG_EXTICR4_EXTI14_PE ((uint16_t)0x0400) /*!< PE[14] pin */
+
+/**
+ * @brief EXTI15 configuration
+ */
+#define SYSCFG_EXTICR4_EXTI15_PA ((uint16_t)0x0000) /*!< PA[15] pin */
+#define SYSCFG_EXTICR4_EXTI15_PB ((uint16_t)0x1000) /*!< PB[15] pin */
+#define SYSCFG_EXTICR4_EXTI15_PC ((uint16_t)0x2000) /*!< PC[15] pin */
+#define SYSCFG_EXTICR4_EXTI15_PD ((uint16_t)0x3000) /*!< PD[15] pin */
+#define SYSCFG_EXTICR4_EXTI15_PE ((uint16_t)0x4000) /*!< PE[15] pin */
+
+/***************** Bit definition for SYSCFG_CFGR2 register *****************/
+#define SYSCFG_CFGR2_LOCKUP_LOCK ((uint32_t)0x00000001) /*!< Enables and locks the PVD connection with Timer1/8/15/16/17 Break Input and also the PVD_EN and PVDSEL[2:0] bits of the Power Control Interface */
+#define SYSCFG_CFGR2_SRAM_PARITY_LOCK ((uint32_t)0x00000002) /*!< Enables and locks the SRAM_PARITY error signal with Break Input of TIMER1/8/15/16/17 */
+#define SYSCFG_CFGR2_PVD_LOCK ((uint32_t)0x00000004) /*!< Enables and locks the LOCKUP (Hardfault) output of CortexM4 with Break Input of TIMER1/8/15/16/17 */
+#define SYSCFG_CFGR2_BYP_ADDR_PAR ((uint32_t)0x00000010) /*!< Disables the adddress parity check on RAM */
+#define SYSCFG_CFGR2_SRAM_PE ((uint32_t)0x00000100) /*!< SRAM Parity error flag */
+
+
+/******************************************************************************/
+/* */
+/* TIM */
+/* */
+/******************************************************************************/
+/******************* Bit definition for TIM_CR1 register ********************/
+#define TIM_CR1_CEN ((uint16_t)0x0001) /*!<Counter enable */
+#define TIM_CR1_UDIS ((uint16_t)0x0002) /*!<Update disable */
+#define TIM_CR1_URS ((uint16_t)0x0004) /*!<Update request source */
+#define TIM_CR1_OPM ((uint16_t)0x0008) /*!<One pulse mode */
+#define TIM_CR1_DIR ((uint16_t)0x0010) /*!<Direction */
+
+#define TIM_CR1_CMS ((uint16_t)0x0060) /*!<CMS[1:0] bits (Center-aligned mode selection) */
+#define TIM_CR1_CMS_0 ((uint16_t)0x0020) /*!<Bit 0 */
+#define TIM_CR1_CMS_1 ((uint16_t)0x0040) /*!<Bit 1 */
+
+#define TIM_CR1_ARPE ((uint16_t)0x0080) /*!<Auto-reload preload enable */
+
+#define TIM_CR1_CKD ((uint16_t)0x0300) /*!<CKD[1:0] bits (clock division) */
+#define TIM_CR1_CKD_0 ((uint16_t)0x0100) /*!<Bit 0 */
+#define TIM_CR1_CKD_1 ((uint16_t)0x0200) /*!<Bit 1 */
+
+#define TIM_CR1_UIFREMAP ((uint16_t)0x0800) /*!<Update interrupt flag remap */
+
+/******************* Bit definition for TIM_CR2 register ********************/
+#define TIM_CR2_CCPC ((uint32_t)0x00000001) /*!<Capture/Compare Preloaded Control */
+#define TIM_CR2_CCUS ((uint32_t)0x00000004) /*!<Capture/Compare Control Update Selection */
+#define TIM_CR2_CCDS ((uint32_t)0x00000008) /*!<Capture/Compare DMA Selection */
+
+#define TIM_CR2_MMS ((uint32_t)0x00000070) /*!<MMS[2:0] bits (Master Mode Selection) */
+#define TIM_CR2_MMS_0 ((uint32_t)0x00000010) /*!<Bit 0 */
+#define TIM_CR2_MMS_1 ((uint32_t)0x00000020) /*!<Bit 1 */
+#define TIM_CR2_MMS_2 ((uint32_t)0x00000040) /*!<Bit 2 */
+
+#define TIM_CR2_TI1S ((uint32_t)0x00000080) /*!<TI1 Selection */
+#define TIM_CR2_OIS1 ((uint32_t)0x00000100) /*!<Output Idle state 1 (OC1 output) */
+#define TIM_CR2_OIS1N ((uint32_t)0x00000200) /*!<Output Idle state 1 (OC1N output) */
+#define TIM_CR2_OIS2 ((uint32_t)0x00000400) /*!<Output Idle state 2 (OC2 output) */
+#define TIM_CR2_OIS2N ((uint32_t)0x00000800) /*!<Output Idle state 2 (OC2N output) */
+#define TIM_CR2_OIS3 ((uint32_t)0x00001000) /*!<Output Idle state 3 (OC3 output) */
+#define TIM_CR2_OIS3N ((uint32_t)0x00002000) /*!<Output Idle state 3 (OC3N output) */
+#define TIM_CR2_OIS4 ((uint32_t)0x00004000) /*!<Output Idle state 4 (OC4 output) */
+#define TIM_CR2_OIS5 ((uint32_t)0x00010000) /*!<Output Idle state 4 (OC4 output) */
+#define TIM_CR2_OIS6 ((uint32_t)0x00020000) /*!<Output Idle state 4 (OC4 output) */
+
+#define TIM_CR2_MMS2 ((uint32_t)0x00F00000) /*!<MMS[2:0] bits (Master Mode Selection) */
+#define TIM_CR2_MMS2_0 ((uint32_t)0x00100000) /*!<Bit 0 */
+#define TIM_CR2_MMS2_1 ((uint32_t)0x00200000) /*!<Bit 1 */
+#define TIM_CR2_MMS2_2 ((uint32_t)0x00400000) /*!<Bit 2 */
+#define TIM_CR2_MMS2_3 ((uint32_t)0x00800000) /*!<Bit 2 */
+
+/******************* Bit definition for TIM_SMCR register *******************/
+#define TIM_SMCR_SMS ((uint32_t)0x00010007) /*!<SMS[2:0] bits (Slave mode selection) */
+#define TIM_SMCR_SMS_0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define TIM_SMCR_SMS_1 ((uint32_t)0x00000002) /*!<Bit 1 */
+#define TIM_SMCR_SMS_2 ((uint32_t)0x00000004) /*!<Bit 2 */
+#define TIM_SMCR_SMS_3 ((uint32_t)0x00010000) /*!<Bit 3 */
+
+#define TIM_SMCR_OCCS ((uint32_t)0x00000008) /*!< OCREF clear selection */
+
+#define TIM_SMCR_TS ((uint32_t)0x00000070) /*!<TS[2:0] bits (Trigger selection) */
+#define TIM_SMCR_TS_0 ((uint32_t)0x00000010) /*!<Bit 0 */
+#define TIM_SMCR_TS_1 ((uint32_t)0x00000020) /*!<Bit 1 */
+#define TIM_SMCR_TS_2 ((uint32_t)0x00000040) /*!<Bit 2 */
+
+#define TIM_SMCR_MSM ((uint32_t)0x00000080) /*!<Master/slave mode */
+
+#define TIM_SMCR_ETF ((uint32_t)0x00000F00) /*!<ETF[3:0] bits (External trigger filter) */
+#define TIM_SMCR_ETF_0 ((uint32_t)0x00000100) /*!<Bit 0 */
+#define TIM_SMCR_ETF_1 ((uint32_t)0x00000200) /*!<Bit 1 */
+#define TIM_SMCR_ETF_2 ((uint32_t)0x00000400) /*!<Bit 2 */
+#define TIM_SMCR_ETF_3 ((uint32_t)0x00000800) /*!<Bit 3 */
+
+#define TIM_SMCR_ETPS ((uint32_t)0x00003000) /*!<ETPS[1:0] bits (External trigger prescaler) */
+#define TIM_SMCR_ETPS_0 ((uint32_t)0x00001000) /*!<Bit 0 */
+#define TIM_SMCR_ETPS_1 ((uint32_t)0x00002000) /*!<Bit 1 */
+
+#define TIM_SMCR_ECE ((uint32_t)0x00004000) /*!<External clock enable */
+#define TIM_SMCR_ETP ((uint32_t)0x00008000) /*!<External trigger polarity */
+
+/******************* Bit definition for TIM_DIER register *******************/
+#define TIM_DIER_UIE ((uint16_t)0x0001) /*!<Update interrupt enable */
+#define TIM_DIER_CC1IE ((uint16_t)0x0002) /*!<Capture/Compare 1 interrupt enable */
+#define TIM_DIER_CC2IE ((uint16_t)0x0004) /*!<Capture/Compare 2 interrupt enable */
+#define TIM_DIER_CC3IE ((uint16_t)0x0008) /*!<Capture/Compare 3 interrupt enable */
+#define TIM_DIER_CC4IE ((uint16_t)0x0010) /*!<Capture/Compare 4 interrupt enable */
+#define TIM_DIER_COMIE ((uint16_t)0x0020) /*!<COM interrupt enable */
+#define TIM_DIER_TIE ((uint16_t)0x0040) /*!<Trigger interrupt enable */
+#define TIM_DIER_BIE ((uint16_t)0x0080) /*!<Break interrupt enable */
+#define TIM_DIER_UDE ((uint16_t)0x0100) /*!<Update DMA request enable */
+#define TIM_DIER_CC1DE ((uint16_t)0x0200) /*!<Capture/Compare 1 DMA request enable */
+#define TIM_DIER_CC2DE ((uint16_t)0x0400) /*!<Capture/Compare 2 DMA request enable */
+#define TIM_DIER_CC3DE ((uint16_t)0x0800) /*!<Capture/Compare 3 DMA request enable */
+#define TIM_DIER_CC4DE ((uint16_t)0x1000) /*!<Capture/Compare 4 DMA request enable */
+#define TIM_DIER_COMDE ((uint16_t)0x2000) /*!<COM DMA request enable */
+#define TIM_DIER_TDE ((uint16_t)0x4000) /*!<Trigger DMA request enable */
+
+/******************** Bit definition for TIM_SR register ********************/
+#define TIM_SR_UIF ((uint32_t)0x00000001) /*!<Update interrupt Flag */
+#define TIM_SR_CC1IF ((uint32_t)0x00000002) /*!<Capture/Compare 1 interrupt Flag */
+#define TIM_SR_CC2IF ((uint32_t)0x00000004) /*!<Capture/Compare 2 interrupt Flag */
+#define TIM_SR_CC3IF ((uint32_t)0x00000008) /*!<Capture/Compare 3 interrupt Flag */
+#define TIM_SR_CC4IF ((uint32_t)0x00000010) /*!<Capture/Compare 4 interrupt Flag */
+#define TIM_SR_COMIF ((uint32_t)0x00000020) /*!<COM interrupt Flag */
+#define TIM_SR_TIF ((uint32_t)0x00000040) /*!<Trigger interrupt Flag */
+#define TIM_SR_BIF ((uint32_t)0x00000080) /*!<Break interrupt Flag */
+#define TIM_SR_B2IF ((uint32_t)0x00000100) /*!<Break2 interrupt Flag */
+#define TIM_SR_CC1OF ((uint32_t)0x00000200) /*!<Capture/Compare 1 Overcapture Flag */
+#define TIM_SR_CC2OF ((uint32_t)0x00000400) /*!<Capture/Compare 2 Overcapture Flag */
+#define TIM_SR_CC3OF ((uint32_t)0x00000800) /*!<Capture/Compare 3 Overcapture Flag */
+#define TIM_SR_CC4OF ((uint32_t)0x00001000) /*!<Capture/Compare 4 Overcapture Flag */
+#define TIM_SR_CC5IF ((uint32_t)0x00010000) /*!<Capture/Compare 5 interrupt Flag */
+#define TIM_SR_CC6IF ((uint32_t)0x00020000) /*!<Capture/Compare 6 interrupt Flag */
+
+
+/******************* Bit definition for TIM_EGR register ********************/
+#define TIM_EGR_UG ((uint16_t)0x0001) /*!<Update Generation */
+#define TIM_EGR_CC1G ((uint16_t)0x0002) /*!<Capture/Compare 1 Generation */
+#define TIM_EGR_CC2G ((uint16_t)0x0004) /*!<Capture/Compare 2 Generation */
+#define TIM_EGR_CC3G ((uint16_t)0x0008) /*!<Capture/Compare 3 Generation */
+#define TIM_EGR_CC4G ((uint16_t)0x0010) /*!<Capture/Compare 4 Generation */
+#define TIM_EGR_COMG ((uint16_t)0x0020) /*!<Capture/Compare Control Update Generation */
+#define TIM_EGR_TG ((uint16_t)0x0040) /*!<Trigger Generation */
+#define TIM_EGR_BG ((uint16_t)0x0080) /*!<Break Generation */
+#define TIM_EGR_B2G ((uint16_t)0x0100) /*!<Break Generation */
+
+
+/****************** Bit definition for TIM_CCMR1 register *******************/
+#define TIM_CCMR1_CC1S ((uint32_t)0x00000003) /*!<CC1S[1:0] bits (Capture/Compare 1 Selection) */
+#define TIM_CCMR1_CC1S_0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define TIM_CCMR1_CC1S_1 ((uint32_t)0x00000002) /*!<Bit 1 */
+
+#define TIM_CCMR1_OC1FE ((uint32_t)0x00000004) /*!<Output Compare 1 Fast enable */
+#define TIM_CCMR1_OC1PE ((uint32_t)0x00000008) /*!<Output Compare 1 Preload enable */
+
+#define TIM_CCMR1_OC1M ((uint32_t)0x00010070) /*!<OC1M[2:0] bits (Output Compare 1 Mode) */
+#define TIM_CCMR1_OC1M_0 ((uint32_t)0x00000010) /*!<Bit 0 */
+#define TIM_CCMR1_OC1M_1 ((uint32_t)0x00000020) /*!<Bit 1 */
+#define TIM_CCMR1_OC1M_2 ((uint32_t)0x00000040) /*!<Bit 2 */
+#define TIM_CCMR1_OC1M_3 ((uint32_t)0x00010000) /*!<Bit 3 */
+
+#define TIM_CCMR1_OC1CE ((uint32_t)0x00000080) /*!<Output Compare 1Clear Enable */
+
+#define TIM_CCMR1_CC2S ((uint32_t)0x00000300) /*!<CC2S[1:0] bits (Capture/Compare 2 Selection) */
+#define TIM_CCMR1_CC2S_0 ((uint32_t)0x00000100) /*!<Bit 0 */
+#define TIM_CCMR1_CC2S_1 ((uint32_t)0x00000200) /*!<Bit 1 */
+
+#define TIM_CCMR1_OC2FE ((uint32_t)0x00000400) /*!<Output Compare 2 Fast enable */
+#define TIM_CCMR1_OC2PE ((uint32_t)0x00000800) /*!<Output Compare 2 Preload enable */
+
+#define TIM_CCMR1_OC2M ((uint32_t)0x01007000) /*!<OC2M[2:0] bits (Output Compare 2 Mode) */
+#define TIM_CCMR1_OC2M_0 ((uint32_t)0x00001000) /*!<Bit 0 */
+#define TIM_CCMR1_OC2M_1 ((uint32_t)0x00002000) /*!<Bit 1 */
+#define TIM_CCMR1_OC2M_2 ((uint32_t)0x00004000) /*!<Bit 2 */
+#define TIM_CCMR1_OC2M_3 ((uint32_t)0x01000000) /*!<Bit 3 */
+
+#define TIM_CCMR1_OC2CE ((uint32_t)0x00008000) /*!<Output Compare 2 Clear Enable */
+
+/*----------------------------------------------------------------------------*/
+
+#define TIM_CCMR1_IC1PSC ((uint32_t)0x0000000C) /*!<IC1PSC[1:0] bits (Input Capture 1 Prescaler) */
+#define TIM_CCMR1_IC1PSC_0 ((uint32_t)0x00000004) /*!<Bit 0 */
+#define TIM_CCMR1_IC1PSC_1 ((uint32_t)0x00000008) /*!<Bit 1 */
+
+#define TIM_CCMR1_IC1F ((uint32_t)0x000000F0) /*!<IC1F[3:0] bits (Input Capture 1 Filter) */
+#define TIM_CCMR1_IC1F_0 ((uint32_t)0x00000010) /*!<Bit 0 */
+#define TIM_CCMR1_IC1F_1 ((uint32_t)0x00000020) /*!<Bit 1 */
+#define TIM_CCMR1_IC1F_2 ((uint32_t)0x00000040) /*!<Bit 2 */
+#define TIM_CCMR1_IC1F_3 ((uint32_t)0x00000080) /*!<Bit 3 */
+
+#define TIM_CCMR1_IC2PSC ((uint32_t)0x00000C00) /*!<IC2PSC[1:0] bits (Input Capture 2 Prescaler) */
+#define TIM_CCMR1_IC2PSC_0 ((uint32_t)0x00000400) /*!<Bit 0 */
+#define TIM_CCMR1_IC2PSC_1 ((uint32_t)0x00000800) /*!<Bit 1 */
+
+#define TIM_CCMR1_IC2F ((uint32_t)0x0000F000) /*!<IC2F[3:0] bits (Input Capture 2 Filter) */
+#define TIM_CCMR1_IC2F_0 ((uint32_t)0x00001000) /*!<Bit 0 */
+#define TIM_CCMR1_IC2F_1 ((uint32_t)0x00002000) /*!<Bit 1 */
+#define TIM_CCMR1_IC2F_2 ((uint32_t)0x00004000) /*!<Bit 2 */
+#define TIM_CCMR1_IC2F_3 ((uint32_t)0x00008000) /*!<Bit 3 */
+
+/****************** Bit definition for TIM_CCMR2 register *******************/
+#define TIM_CCMR2_CC3S ((uint32_t)0x00000003) /*!<CC3S[1:0] bits (Capture/Compare 3 Selection) */
+#define TIM_CCMR2_CC3S_0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define TIM_CCMR2_CC3S_1 ((uint32_t)0x00000002) /*!<Bit 1 */
+
+#define TIM_CCMR2_OC3FE ((uint32_t)0x00000004) /*!<Output Compare 3 Fast enable */
+#define TIM_CCMR2_OC3PE ((uint32_t)0x00000008) /*!<Output Compare 3 Preload enable */
+
+#define TIM_CCMR2_OC3M ((uint32_t)0x00000070) /*!<OC3M[2:0] bits (Output Compare 3 Mode) */
+#define TIM_CCMR2_OC3M_0 ((uint32_t)0x00000010) /*!<Bit 0 */
+#define TIM_CCMR2_OC3M_1 ((uint32_t)0x00000020) /*!<Bit 1 */
+#define TIM_CCMR2_OC3M_2 ((uint32_t)0x00000040) /*!<Bit 2 */
+#define TIM_CCMR2_OC3M_3 ((uint32_t)0x00010000) /*!<Bit 3 */
+
+#define TIM_CCMR2_OC3CE ((uint32_t)0x00000080) /*!<Output Compare 3 Clear Enable */
+
+#define TIM_CCMR2_CC4S ((uint32_t)0x00000300) /*!<CC4S[1:0] bits (Capture/Compare 4 Selection) */
+#define TIM_CCMR2_CC4S_0 ((uint32_t)0x00000100) /*!<Bit 0 */
+#define TIM_CCMR2_CC4S_1 ((uint32_t)0x00000200) /*!<Bit 1 */
+
+#define TIM_CCMR2_OC4FE ((uint32_t)0x00000400) /*!<Output Compare 4 Fast enable */
+#define TIM_CCMR2_OC4PE ((uint32_t)0x00000800) /*!<Output Compare 4 Preload enable */
+
+#define TIM_CCMR2_OC4M ((uint32_t)0x00007000) /*!<OC4M[2:0] bits (Output Compare 4 Mode) */
+#define TIM_CCMR2_OC4M_0 ((uint32_t)0x00001000) /*!<Bit 0 */
+#define TIM_CCMR2_OC4M_1 ((uint32_t)0x00002000) /*!<Bit 1 */
+#define TIM_CCMR2_OC4M_2 ((uint32_t)0x00004000) /*!<Bit 2 */
+#define TIM_CCMR2_OC4M_3 ((uint32_t)0x00100000) /*!<Bit 3 */
+
+#define TIM_CCMR2_OC4CE ((uint32_t)0x00008000) /*!<Output Compare 4 Clear Enable */
+
+/*----------------------------------------------------------------------------*/
+
+#define TIM_CCMR2_IC3PSC ((uint16_t)0x0000000C) /*!<IC3PSC[1:0] bits (Input Capture 3 Prescaler) */
+#define TIM_CCMR2_IC3PSC_0 ((uint16_t)0x00000004) /*!<Bit 0 */
+#define TIM_CCMR2_IC3PSC_1 ((uint16_t)0x00000008) /*!<Bit 1 */
+
+#define TIM_CCMR2_IC3F ((uint16_t)0x000000F0) /*!<IC3F[3:0] bits (Input Capture 3 Filter) */
+#define TIM_CCMR2_IC3F_0 ((uint16_t)0x00000010) /*!<Bit 0 */
+#define TIM_CCMR2_IC3F_1 ((uint16_t)0x00000020) /*!<Bit 1 */
+#define TIM_CCMR2_IC3F_2 ((uint16_t)0x00000040) /*!<Bit 2 */
+#define TIM_CCMR2_IC3F_3 ((uint16_t)0x00000080) /*!<Bit 3 */
+
+#define TIM_CCMR2_IC4PSC ((uint16_t)0x00000C00) /*!<IC4PSC[1:0] bits (Input Capture 4 Prescaler) */
+#define TIM_CCMR2_IC4PSC_0 ((uint16_t)0x00000400) /*!<Bit 0 */
+#define TIM_CCMR2_IC4PSC_1 ((uint16_t)0x00000800) /*!<Bit 1 */
+
+#define TIM_CCMR2_IC4F ((uint16_t)0x0000F000) /*!<IC4F[3:0] bits (Input Capture 4 Filter) */
+#define TIM_CCMR2_IC4F_0 ((uint16_t)0x00001000) /*!<Bit 0 */
+#define TIM_CCMR2_IC4F_1 ((uint16_t)0x00002000) /*!<Bit 1 */
+#define TIM_CCMR2_IC4F_2 ((uint16_t)0x00004000) /*!<Bit 2 */
+#define TIM_CCMR2_IC4F_3 ((uint16_t)0x00008000) /*!<Bit 3 */
+
+/******************* Bit definition for TIM_CCER register *******************/
+#define TIM_CCER_CC1E ((uint32_t)0x00000001) /*!<Capture/Compare 1 output enable */
+#define TIM_CCER_CC1P ((uint32_t)0x00000002) /*!<Capture/Compare 1 output Polarity */
+#define TIM_CCER_CC1NE ((uint32_t)0x00000004) /*!<Capture/Compare 1 Complementary output enable */
+#define TIM_CCER_CC1NP ((uint32_t)0x00000008) /*!<Capture/Compare 1 Complementary output Polarity */
+#define TIM_CCER_CC2E ((uint32_t)0x00000010) /*!<Capture/Compare 2 output enable */
+#define TIM_CCER_CC2P ((uint32_t)0x00000020) /*!<Capture/Compare 2 output Polarity */
+#define TIM_CCER_CC2NE ((uint32_t)0x00000040) /*!<Capture/Compare 2 Complementary output enable */
+#define TIM_CCER_CC2NP ((uint32_t)0x00000080) /*!<Capture/Compare 2 Complementary output Polarity */
+#define TIM_CCER_CC3E ((uint32_t)0x00000100) /*!<Capture/Compare 3 output enable */
+#define TIM_CCER_CC3P ((uint32_t)0x00000200) /*!<Capture/Compare 3 output Polarity */
+#define TIM_CCER_CC3NE ((uint32_t)0x00000400) /*!<Capture/Compare 3 Complementary output enable */
+#define TIM_CCER_CC3NP ((uint32_t)0x00000800) /*!<Capture/Compare 3 Complementary output Polarity */
+#define TIM_CCER_CC4E ((uint32_t)0x00001000) /*!<Capture/Compare 4 output enable */
+#define TIM_CCER_CC4P ((uint32_t)0x00002000) /*!<Capture/Compare 4 output Polarity */
+#define TIM_CCER_CC4NP ((uint32_t)0x00008000) /*!<Capture/Compare 4 Complementary output Polarity */
+#define TIM_CCER_CC5E ((uint32_t)0x00010000) /*!<Capture/Compare 5 output enable */
+#define TIM_CCER_CC5P ((uint32_t)0x00020000) /*!<Capture/Compare 5 output Polarity */
+#define TIM_CCER_CC6E ((uint32_t)0x00100000) /*!<Capture/Compare 6 output enable */
+#define TIM_CCER_CC6P ((uint32_t)0x00200000) /*!<Capture/Compare 6 output Polarity */
+/******************* Bit definition for TIM_CNT register ********************/
+#define TIM_CNT_CNT ((uint32_t)0xFFFFFFFF) /*!<Counter Value */
+#define TIM_CNT_UIFCPY ((uint32_t)0x80000000) /*!<Update interrupt flag copy */
+/******************* Bit definition for TIM_PSC register ********************/
+#define TIM_PSC_PSC ((uint16_t)0xFFFF) /*!<Prescaler Value */
+
+/******************* Bit definition for TIM_ARR register ********************/
+#define TIM_ARR_ARR ((uint32_t)0xFFFFFFFF) /*!<actual auto-reload Value */
+
+/******************* Bit definition for TIM_RCR register ********************/
+#define TIM_RCR_REP ((uint8_t)0xFF) /*!<Repetition Counter Value */
+
+/******************* Bit definition for TIM_CCR1 register *******************/
+#define TIM_CCR1_CCR1 ((uint16_t)0xFFFF) /*!<Capture/Compare 1 Value */
+
+/******************* Bit definition for TIM_CCR2 register *******************/
+#define TIM_CCR2_CCR2 ((uint16_t)0xFFFF) /*!<Capture/Compare 2 Value */
+
+/******************* Bit definition for TIM_CCR3 register *******************/
+#define TIM_CCR3_CCR3 ((uint16_t)0xFFFF) /*!<Capture/Compare 3 Value */
+
+/******************* Bit definition for TIM_CCR4 register *******************/
+#define TIM_CCR4_CCR4 ((uint16_t)0xFFFF) /*!<Capture/Compare 4 Value */
+
+/******************* Bit definition for TIM_CCR5 register *******************/
+#define TIM_CCR5_CCR5 ((uint32_t)0xFFFFFFFF) /*!<Capture/Compare 5 Value */
+#define TIM_CCR5_GC5C1 ((uint32_t)0x20000000) /*!<Group Channel 5 and Channel 1 */
+#define TIM_CCR5_GC5C2 ((uint32_t)0x40000000) /*!<Group Channel 5 and Channel 2 */
+#define TIM_CCR5_GC5C3 ((uint32_t)0x80000000) /*!<Group Channel 5 and Channel 3 */
+
+/******************* Bit definition for TIM_CCR6 register *******************/
+#define TIM_CCR6_CCR6 ((uint16_t)0xFFFF) /*!<Capture/Compare 6 Value */
+
+/******************* Bit definition for TIM_BDTR register *******************/
+#define TIM_BDTR_DTG ((uint32_t)0x000000FF) /*!<DTG[0:7] bits (Dead-Time Generator set-up) */
+#define TIM_BDTR_DTG_0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define TIM_BDTR_DTG_1 ((uint32_t)0x00000002) /*!<Bit 1 */
+#define TIM_BDTR_DTG_2 ((uint32_t)0x00000004) /*!<Bit 2 */
+#define TIM_BDTR_DTG_3 ((uint32_t)0x00000008) /*!<Bit 3 */
+#define TIM_BDTR_DTG_4 ((uint32_t)0x00000010) /*!<Bit 4 */
+#define TIM_BDTR_DTG_5 ((uint32_t)0x00000020) /*!<Bit 5 */
+#define TIM_BDTR_DTG_6 ((uint32_t)0x00000040) /*!<Bit 6 */
+#define TIM_BDTR_DTG_7 ((uint32_t)0x00000080) /*!<Bit 7 */
+
+#define TIM_BDTR_LOCK ((uint32_t)0x00000300) /*!<LOCK[1:0] bits (Lock Configuration) */
+#define TIM_BDTR_LOCK_0 ((uint32_t)0x00000100) /*!<Bit 0 */
+#define TIM_BDTR_LOCK_1 ((uint32_t)0x00000200) /*!<Bit 1 */
+
+#define TIM_BDTR_OSSI ((uint32_t)0x00000400) /*!<Off-State Selection for Idle mode */
+#define TIM_BDTR_OSSR ((uint32_t)0x00000800) /*!<Off-State Selection for Run mode */
+#define TIM_BDTR_BKE ((uint32_t)0x00001000) /*!<Break enable for Break1 */
+#define TIM_BDTR_BKP ((uint32_t)0x00002000) /*!<Break Polarity for Break1 */
+#define TIM_BDTR_AOE ((uint32_t)0x00004000) /*!<Automatic Output enable */
+#define TIM_BDTR_MOE ((uint32_t)0x00008000) /*!<Main Output enable */
+
+#define TIM_BDTR_BKF ((uint32_t)0x000F0000) /*!<Break Filter for Break1 */
+#define TIM_BDTR_BK2F ((uint32_t)0x00F00000) /*!<Break Filter for Break2 */
+
+#define TIM_BDTR_BK2E ((uint32_t)0x01000000) /*!<Break enable for Break2 */
+#define TIM_BDTR_BK2P ((uint32_t)0x02000000) /*!<Break Polarity for Break2 */
+
+/******************* Bit definition for TIM_DCR register ********************/
+#define TIM_DCR_DBA ((uint16_t)0x001F) /*!<DBA[4:0] bits (DMA Base Address) */
+#define TIM_DCR_DBA_0 ((uint16_t)0x0001) /*!<Bit 0 */
+#define TIM_DCR_DBA_1 ((uint16_t)0x0002) /*!<Bit 1 */
+#define TIM_DCR_DBA_2 ((uint16_t)0x0004) /*!<Bit 2 */
+#define TIM_DCR_DBA_3 ((uint16_t)0x0008) /*!<Bit 3 */
+#define TIM_DCR_DBA_4 ((uint16_t)0x0010) /*!<Bit 4 */
+
+#define TIM_DCR_DBL ((uint16_t)0x1F00) /*!<DBL[4:0] bits (DMA Burst Length) */
+#define TIM_DCR_DBL_0 ((uint16_t)0x0100) /*!<Bit 0 */
+#define TIM_DCR_DBL_1 ((uint16_t)0x0200) /*!<Bit 1 */
+#define TIM_DCR_DBL_2 ((uint16_t)0x0400) /*!<Bit 2 */
+#define TIM_DCR_DBL_3 ((uint16_t)0x0800) /*!<Bit 3 */
+#define TIM_DCR_DBL_4 ((uint16_t)0x1000) /*!<Bit 4 */
+
+/******************* Bit definition for TIM_DMAR register *******************/
+#define TIM_DMAR_DMAB ((uint16_t)0xFFFF) /*!<DMA register for burst accesses */
+
+/******************* Bit definition for TIM16_OR register *********************/
+#define TIM16_OR_TI1_RMP ((uint16_t)0x00C0) /*!<TI1_RMP[1:0] bits (TIM16 Input 1 remap) */
+#define TIM16_OR_TI1_RMP_0 ((uint16_t)0x0040) /*!<Bit 0 */
+#define TIM16_OR_TI1_RMP_1 ((uint16_t)0x0080) /*!<Bit 1 */
+
+/******************* Bit definition for TIM1_OR register *********************/
+#define TIM1_OR_ETR_RMP ((uint16_t)0x000F) /*!<ETR_RMP[3:0] bits (TIM1 ETR remap) */
+#define TIM1_OR_ETR_RMP_0 ((uint16_t)0x0001) /*!<Bit 0 */
+#define TIM1_OR_ETR_RMP_1 ((uint16_t)0x0002) /*!<Bit 1 */
+#define TIM1_OR_ETR_RMP_2 ((uint16_t)0x0004) /*!<Bit 2 */
+#define TIM1_OR_ETR_RMP_3 ((uint16_t)0x0008) /*!<Bit 3 */
+
+/******************* Bit definition for TIM8_OR register *********************/
+#define TIM8_OR_ETR_RMP ((uint16_t)0x000F) /*!<ETR_RMP[3:0] bits (TIM8 ETR remap) */
+#define TIM8_OR_ETR_RMP_0 ((uint16_t)0x0001) /*!<Bit 0 */
+#define TIM8_OR_ETR_RMP_1 ((uint16_t)0x0002) /*!<Bit 1 */
+#define TIM8_OR_ETR_RMP_2 ((uint16_t)0x0004) /*!<Bit 2 */
+#define TIM8_OR_ETR_RMP_3 ((uint16_t)0x0008) /*!<Bit 3 */
+
+/****************** Bit definition for TIM_CCMR3 register *******************/
+#define TIM_CCMR3_OC5FE ((uint32_t)0x00000004) /*!<Output Compare 5 Fast enable */
+#define TIM_CCMR3_OC5PE ((uint32_t)0x00000008) /*!<Output Compare 5 Preload enable */
+
+#define TIM_CCMR3_OC5M ((uint32_t)0x00000070) /*!<OC5M[2:0] bits (Output Compare 5 Mode) */
+#define TIM_CCMR3_OC5M_0 ((uint32_t)0x00000010) /*!<Bit 0 */
+#define TIM_CCMR3_OC5M_1 ((uint32_t)0x00000020) /*!<Bit 1 */
+#define TIM_CCMR3_OC5M_2 ((uint32_t)0x00000040) /*!<Bit 2 */
+#define TIM_CCMR3_OC5M_3 ((uint32_t)0x00010000) /*!<Bit 3 */
+
+#define TIM_CCMR3_OC5CE ((uint32_t)0x00000080) /*!<Output Compare 5 Clear Enable */
+
+#define TIM_CCMR3_OC6FE ((uint32_t)0x00000400) /*!<Output Compare 4 Fast enable */
+#define TIM_CCMR3_OC6PE ((uint32_t)0x00000800) /*!<Output Compare 4 Preload enable */
+
+#define TIM_CCMR3_OC6M ((uint32_t)0x00007000) /*!<OC4M[2:0] bits (Output Compare 4 Mode) */
+#define TIM_CCMR3_OC6M_0 ((uint32_t)0x00001000) /*!<Bit 0 */
+#define TIM_CCMR3_OC6M_1 ((uint32_t)0x00002000) /*!<Bit 1 */
+#define TIM_CCMR3_OC6M_2 ((uint32_t)0x00004000) /*!<Bit 2 */
+#define TIM_CCMR3_OC6M_3 ((uint32_t)0x00100000) /*!<Bit 3 */
+
+#define TIM_CCMR3_OC6CE ((uint32_t)0x00008000) /*!<Output Compare 4 Clear Enable */
+
+/******************************************************************************/
+/* */
+/* Universal Synchronous Asynchronous Receiver Transmitter (USART) */
+/* */
+/******************************************************************************/
+/****************** Bit definition for USART_CR1 register *******************/
+#define USART_CR1_UE ((uint32_t)0x00000001) /*!< USART Enable */
+#define USART_CR1_UESM ((uint32_t)0x00000002) /*!< USART Enable in STOP Mode */
+#define USART_CR1_RE ((uint32_t)0x00000004) /*!< Receiver Enable */
+#define USART_CR1_TE ((uint32_t)0x00000008) /*!< Transmitter Enable */
+#define USART_CR1_IDLEIE ((uint32_t)0x00000010) /*!< IDLE Interrupt Enable */
+#define USART_CR1_RXNEIE ((uint32_t)0x00000020) /*!< RXNE Interrupt Enable */
+#define USART_CR1_TCIE ((uint32_t)0x00000040) /*!< Transmission Complete Interrupt Enable */
+#define USART_CR1_TXEIE ((uint32_t)0x00000080) /*!< TXE Interrupt Enable */
+#define USART_CR1_PEIE ((uint32_t)0x00000100) /*!< PE Interrupt Enable */
+#define USART_CR1_PS ((uint32_t)0x00000200) /*!< Parity Selection */
+#define USART_CR1_PCE ((uint32_t)0x00000400) /*!< Parity Control Enable */
+#define USART_CR1_WAKE ((uint32_t)0x00000800) /*!< Receiver Wakeup method */
+#define USART_CR1_M ((uint32_t)0x00001000) /*!< Word length */
+#define USART_CR1_MME ((uint32_t)0x00002000) /*!< Mute Mode Enable */
+#define USART_CR1_CMIE ((uint32_t)0x00004000) /*!< Character match interrupt enable */
+#define USART_CR1_OVER8 ((uint32_t)0x00008000) /*!< Oversampling by 8-bit or 16-bit mode */
+#define USART_CR1_DEDT ((uint32_t)0x001F0000) /*!< DEDT[4:0] bits (Driver Enable Deassertion Time) */
+#define USART_CR1_DEDT_0 ((uint32_t)0x00010000) /*!< Bit 0 */
+#define USART_CR1_DEDT_1 ((uint32_t)0x00020000) /*!< Bit 1 */
+#define USART_CR1_DEDT_2 ((uint32_t)0x00040000) /*!< Bit 2 */
+#define USART_CR1_DEDT_3 ((uint32_t)0x00080000) /*!< Bit 3 */
+#define USART_CR1_DEDT_4 ((uint32_t)0x00100000) /*!< Bit 4 */
+#define USART_CR1_DEAT ((uint32_t)0x03E00000) /*!< DEAT[4:0] bits (Driver Enable Assertion Time) */
+#define USART_CR1_DEAT_0 ((uint32_t)0x00200000) /*!< Bit 0 */
+#define USART_CR1_DEAT_1 ((uint32_t)0x00400000) /*!< Bit 1 */
+#define USART_CR1_DEAT_2 ((uint32_t)0x00800000) /*!< Bit 2 */
+#define USART_CR1_DEAT_3 ((uint32_t)0x01000000) /*!< Bit 3 */
+#define USART_CR1_DEAT_4 ((uint32_t)0x02000000) /*!< Bit 4 */
+#define USART_CR1_RTOIE ((uint32_t)0x04000000) /*!< Receive Time Out interrupt enable */
+#define USART_CR1_EOBIE ((uint32_t)0x08000000) /*!< End of Block interrupt enable */
+
+/****************** Bit definition for USART_CR2 register *******************/
+#define USART_CR2_ADDM7 ((uint32_t)0x00000010) /*!< 7-bit or 4-bit Address Detection */
+#define USART_CR2_LBDL ((uint32_t)0x00000020) /*!< LIN Break Detection Length */
+#define USART_CR2_LBDIE ((uint32_t)0x00000040) /*!< LIN Break Detection Interrupt Enable */
+#define USART_CR2_LBCL ((uint32_t)0x00000100) /*!< Last Bit Clock pulse */
+#define USART_CR2_CPHA ((uint32_t)0x00000200) /*!< Clock Phase */
+#define USART_CR2_CPOL ((uint32_t)0x00000400) /*!< Clock Polarity */
+#define USART_CR2_CLKEN ((uint32_t)0x00000800) /*!< Clock Enable */
+#define USART_CR2_STOP ((uint32_t)0x00003000) /*!< STOP[1:0] bits (STOP bits) */
+#define USART_CR2_STOP_0 ((uint32_t)0x00001000) /*!< Bit 0 */
+#define USART_CR2_STOP_1 ((uint32_t)0x00002000) /*!< Bit 1 */
+#define USART_CR2_LINEN ((uint32_t)0x00004000) /*!< LIN mode enable */
+#define USART_CR2_SWAP ((uint32_t)0x00008000) /*!< SWAP TX/RX pins */
+#define USART_CR2_RXINV ((uint32_t)0x00010000) /*!< RX pin active level inversion */
+#define USART_CR2_TXINV ((uint32_t)0x00020000) /*!< TX pin active level inversion */
+#define USART_CR2_DATAINV ((uint32_t)0x00040000) /*!< Binary data inversion */
+#define USART_CR2_MSBFIRST ((uint32_t)0x00080000) /*!< Most Significant Bit First */
+#define USART_CR2_ABREN ((uint32_t)0x00100000) /*!< Auto Baud-Rate Enable*/
+#define USART_CR2_ABRMODE ((uint32_t)0x00600000) /*!< ABRMOD[1:0] bits (Auto Baud-Rate Mode) */
+#define USART_CR2_ABRMODE_0 ((uint32_t)0x00200000) /*!< Bit 0 */
+#define USART_CR2_ABRMODE_1 ((uint32_t)0x00400000) /*!< Bit 1 */
+#define USART_CR2_RTOEN ((uint32_t)0x00800000) /*!< Receiver Time-Out enable */
+#define USART_CR2_ADD ((uint32_t)0xFF000000) /*!< Address of the USART node */
+
+/****************** Bit definition for USART_CR3 register *******************/
+#define USART_CR3_EIE ((uint32_t)0x00000001) /*!< Error Interrupt Enable */
+#define USART_CR3_IREN ((uint32_t)0x00000002) /*!< IrDA mode Enable */
+#define USART_CR3_IRLP ((uint32_t)0x00000004) /*!< IrDA Low-Power */
+#define USART_CR3_HDSEL ((uint32_t)0x00000008) /*!< Half-Duplex Selection */
+#define USART_CR3_NACK ((uint32_t)0x00000010) /*!< SmartCard NACK enable */
+#define USART_CR3_SCEN ((uint32_t)0x00000020) /*!< SmartCard mode enable */
+#define USART_CR3_DMAR ((uint32_t)0x00000040) /*!< DMA Enable Receiver */
+#define USART_CR3_DMAT ((uint32_t)0x00000080) /*!< DMA Enable Transmitter */
+#define USART_CR3_RTSE ((uint32_t)0x00000100) /*!< RTS Enable */
+#define USART_CR3_CTSE ((uint32_t)0x00000200) /*!< CTS Enable */
+#define USART_CR3_CTSIE ((uint32_t)0x00000400) /*!< CTS Interrupt Enable */
+#define USART_CR3_ONEBIT ((uint32_t)0x00000800) /*!< One sample bit method enable */
+#define USART_CR3_OVRDIS ((uint32_t)0x00001000) /*!< Overrun Disable */
+#define USART_CR3_DDRE ((uint32_t)0x00002000) /*!< DMA Disable on Reception Error */
+#define USART_CR3_DEM ((uint32_t)0x00004000) /*!< Driver Enable Mode */
+#define USART_CR3_DEP ((uint32_t)0x00008000) /*!< Driver Enable Polarity Selection */
+#define USART_CR3_SCARCNT ((uint32_t)0x000E0000) /*!< SCARCNT[2:0] bits (SmartCard Auto-Retry Count) */
+#define USART_CR3_SCARCNT_0 ((uint32_t)0x00020000) /*!< Bit 0 */
+#define USART_CR3_SCARCNT_1 ((uint32_t)0x00040000) /*!< Bit 1 */
+#define USART_CR3_SCARCNT_2 ((uint32_t)0x00080000) /*!< Bit 2 */
+#define USART_CR3_WUS ((uint32_t)0x00300000) /*!< WUS[1:0] bits (Wake UP Interrupt Flag Selection) */
+#define USART_CR3_WUS_0 ((uint32_t)0x00100000) /*!< Bit 0 */
+#define USART_CR3_WUS_1 ((uint32_t)0x00200000) /*!< Bit 1 */
+#define USART_CR3_WUFIE ((uint32_t)0x00400000) /*!< Wake Up Interrupt Enable */
+
+/****************** Bit definition for USART_BRR register *******************/
+#define USART_BRR_DIV_FRACTION ((uint16_t)0x000F) /*!< Fraction of USARTDIV */
+#define USART_BRR_DIV_MANTISSA ((uint16_t)0xFFF0) /*!< Mantissa of USARTDIV */
+
+/****************** Bit definition for USART_GTPR register ******************/
+#define USART_GTPR_PSC ((uint16_t)0x00FF) /*!< PSC[7:0] bits (Prescaler value) */
+#define USART_GTPR_GT ((uint16_t)0xFF00) /*!< GT[7:0] bits (Guard time value) */
+
+
+/******************* Bit definition for USART_RTOR register *****************/
+#define USART_RTOR_RTO ((uint32_t)0x00FFFFFF) /*!< Receiver Time Out Value */
+#define USART_RTOR_BLEN ((uint32_t)0xFF000000) /*!< Block Length */
+
+/******************* Bit definition for USART_RQR register ******************/
+#define USART_RQR_ABRRQ ((uint16_t)0x0001) /*!< Auto-Baud Rate Request */
+#define USART_RQR_SBKRQ ((uint16_t)0x0002) /*!< Send Break Request */
+#define USART_RQR_MMRQ ((uint16_t)0x0004) /*!< Mute Mode Request */
+#define USART_RQR_RXFRQ ((uint16_t)0x0008) /*!< Receive Data flush Request */
+#define USART_RQR_TXFRQ ((uint16_t)0x0010) /*!< Transmit data flush Request */
+
+/******************* Bit definition for USART_ISR register ******************/
+#define USART_ISR_PE ((uint32_t)0x00000001) /*!< Parity Error */
+#define USART_ISR_FE ((uint32_t)0x00000002) /*!< Framing Error */
+#define USART_ISR_NE ((uint32_t)0x00000004) /*!< Noise detected Flag */
+#define USART_ISR_ORE ((uint32_t)0x00000008) /*!< OverRun Error */
+#define USART_ISR_IDLE ((uint32_t)0x00000010) /*!< IDLE line detected */
+#define USART_ISR_RXNE ((uint32_t)0x00000020) /*!< Read Data Register Not Empty */
+#define USART_ISR_TC ((uint32_t)0x00000040) /*!< Transmission Complete */
+#define USART_ISR_TXE ((uint32_t)0x00000080) /*!< Transmit Data Register Empty */
+#define USART_ISR_LBD ((uint32_t)0x00000100) /*!< LIN Break Detection Flag */
+#define USART_ISR_CTSIF ((uint32_t)0x00000200) /*!< CTS interrupt flag */
+#define USART_ISR_CTS ((uint32_t)0x00000400) /*!< CTS flag */
+#define USART_ISR_RTOF ((uint32_t)0x00000800) /*!< Receiver Time Out */
+#define USART_ISR_EOBF ((uint32_t)0x00001000) /*!< End Of Block Flag */
+#define USART_ISR_ABRE ((uint32_t)0x00004000) /*!< Auto-Baud Rate Error */
+#define USART_ISR_ABRF ((uint32_t)0x00008000) /*!< Auto-Baud Rate Flag */
+#define USART_ISR_BUSY ((uint32_t)0x00010000) /*!< Busy Flag */
+#define USART_ISR_CMF ((uint32_t)0x00020000) /*!< Character Match Flag */
+#define USART_ISR_SBKF ((uint32_t)0x00040000) /*!< Send Break Flag */
+#define USART_ISR_RWU ((uint32_t)0x00080000) /*!< Receive Wake Up from mute mode Flag */
+#define USART_ISR_WUF ((uint32_t)0x00100000) /*!< Wake Up from stop mode Flag */
+#define USART_ISR_TEACK ((uint32_t)0x00200000) /*!< Transmit Enable Acknowledge Flag */
+#define USART_ISR_REACK ((uint32_t)0x00400000) /*!< Receive Enable Acknowledge Flag */
+
+/******************* Bit definition for USART_ICR register ******************/
+#define USART_ICR_PECF ((uint32_t)0x00000001) /*!< Parity Error Clear Flag */
+#define USART_ICR_FECF ((uint32_t)0x00000002) /*!< Framing Error Clear Flag */
+#define USART_ICR_NCF ((uint32_t)0x00000004) /*!< Noise detected Clear Flag */
+#define USART_ICR_ORECF ((uint32_t)0x00000008) /*!< OverRun Error Clear Flag */
+#define USART_ICR_IDLECF ((uint32_t)0x00000010) /*!< IDLE line detected Clear Flag */
+#define USART_ICR_TCCF ((uint32_t)0x00000040) /*!< Transmission Complete Clear Flag */
+#define USART_ICR_LBDCF ((uint32_t)0x00000100) /*!< LIN Break Detection Clear Flag */
+#define USART_ICR_CTSCF ((uint32_t)0x00000200) /*!< CTS Interrupt Clear Flag */
+#define USART_ICR_RTOCF ((uint32_t)0x00000800) /*!< Receiver Time Out Clear Flag */
+#define USART_ICR_EOBCF ((uint32_t)0x00001000) /*!< End Of Block Clear Flag */
+#define USART_ICR_CMCF ((uint32_t)0x00020000) /*!< Character Match Clear Flag */
+#define USART_ICR_WUCF ((uint32_t)0x00100000) /*!< Wake Up from stop mode Clear Flag */
+
+/******************* Bit definition for USART_RDR register ******************/
+#define USART_RDR_RDR ((uint16_t)0x01FF) /*!< RDR[8:0] bits (Receive Data value) */
+
+/******************* Bit definition for USART_TDR register ******************/
+#define USART_TDR_TDR ((uint16_t)0x01FF) /*!< TDR[8:0] bits (Transmit Data value) */
+
+/******************************************************************************/
+/* */
+/* Window WATCHDOG */
+/* */
+/******************************************************************************/
+/******************* Bit definition for WWDG_CR register ********************/
+#define WWDG_CR_T ((uint8_t)0x7F) /*!<T[6:0] bits (7-Bit counter (MSB to LSB)) */
+#define WWDG_CR_T0 ((uint8_t)0x01) /*!<Bit 0 */
+#define WWDG_CR_T1 ((uint8_t)0x02) /*!<Bit 1 */
+#define WWDG_CR_T2 ((uint8_t)0x04) /*!<Bit 2 */
+#define WWDG_CR_T3 ((uint8_t)0x08) /*!<Bit 3 */
+#define WWDG_CR_T4 ((uint8_t)0x10) /*!<Bit 4 */
+#define WWDG_CR_T5 ((uint8_t)0x20) /*!<Bit 5 */
+#define WWDG_CR_T6 ((uint8_t)0x40) /*!<Bit 6 */
+
+#define WWDG_CR_WDGA ((uint8_t)0x80) /*!<Activation bit */
+
+/******************* Bit definition for WWDG_CFR register *******************/
+#define WWDG_CFR_W ((uint16_t)0x007F) /*!<W[6:0] bits (7-bit window value) */
+#define WWDG_CFR_W0 ((uint16_t)0x0001) /*!<Bit 0 */
+#define WWDG_CFR_W1 ((uint16_t)0x0002) /*!<Bit 1 */
+#define WWDG_CFR_W2 ((uint16_t)0x0004) /*!<Bit 2 */
+#define WWDG_CFR_W3 ((uint16_t)0x0008) /*!<Bit 3 */
+#define WWDG_CFR_W4 ((uint16_t)0x0010) /*!<Bit 4 */
+#define WWDG_CFR_W5 ((uint16_t)0x0020) /*!<Bit 5 */
+#define WWDG_CFR_W6 ((uint16_t)0x0040) /*!<Bit 6 */
+
+#define WWDG_CFR_WDGTB ((uint16_t)0x0180) /*!<WDGTB[1:0] bits (Timer Base) */
+#define WWDG_CFR_WDGTB0 ((uint16_t)0x0080) /*!<Bit 0 */
+#define WWDG_CFR_WDGTB1 ((uint16_t)0x0100) /*!<Bit 1 */
+
+#define WWDG_CFR_EWI ((uint16_t)0x0200) /*!<Early Wakeup Interrupt */
+
+/******************* Bit definition for WWDG_SR register ********************/
+#define WWDG_SR_EWIF ((uint8_t)0x01) /*!<Early Wakeup Interrupt Flag */
+
+/**
+ * @}
+ */
+
+ /**
+ * @}
+ */
+
+#ifdef USE_STDPERIPH_DRIVER
+ #include "stm32f30x_conf.h"
+#endif /* USE_STDPERIPH_DRIVER */
+
+/** @addtogroup Exported_macro
+ * @{
+ */
+
+#define SET_BIT(REG, BIT) ((REG) |= (BIT))
+
+#define CLEAR_BIT(REG, BIT) ((REG) &= ~(BIT))
+
+#define READ_BIT(REG, BIT) ((REG) & (BIT))
+
+#define CLEAR_REG(REG) ((REG) = (0x0))
+
+#define WRITE_REG(REG, VAL) ((REG) = (VAL))
+
+#define READ_REG(REG) ((REG))
+
+#define MODIFY_REG(REG, CLEARMASK, SETMASK) WRITE_REG((REG), (((READ_REG(REG)) & (~(CLEARMASK))) | (SETMASK)))
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif /* __cplusplus */
+
+#endif /* __STM32F30x_H */
+
+/**
+ * @}
+ */
+
+ /**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/os/hal/platforms/common/ARMCMx/nvic.c b/os/hal/platforms/common/ARMCMx/nvic.c new file mode 100644 index 000000000..c45366396 --- /dev/null +++ b/os/hal/platforms/common/ARMCMx/nvic.c @@ -0,0 +1,89 @@ +/*
+ ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+/**
+ * @file common/ARMCMx/nvic.c
+ * @brief Cortex-Mx NVIC support code.
+ *
+ * @addtogroup COMMON_ARMCMx_NVIC
+ * @{
+ */
+
+#include "hal.h"
+
+/*===========================================================================*/
+/* Driver local definitions. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver exported variables. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver local types. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver local variables. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver local functions. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver exported functions. */
+/*===========================================================================*/
+
+/**
+ * @brief Sets the priority of an interrupt handler and enables it.
+ * @note The parameters are not tested for correctness.
+ *
+ * @param[in] n the interrupt number
+ * @param[in] prio the interrupt priority mask
+ */
+void nvicEnableVector(IRQn_Type n, uint32_t prio) {
+
+ NVIC->IP[n] = NVIC_PRIORITY_MASK(prio);
+ NVIC->ICPR[n >> 5] = 1 << (n & 0x1F);
+ NVIC->ISER[n >> 5] = 1 << (n & 0x1F);
+}
+
+/**
+ * @brief Disables an interrupt handler.
+ * @note The parameters are not tested for correctness.
+ *
+ * @param[in] n the interrupt number
+ */
+void nvicDisableVector(IRQn_Type n) {
+
+ NVIC->ICER[n >> 5] = 1 << (n & 0x1F);
+ NVIC->IP[n] = 0;
+}
+
+/**
+ * @brief Changes the priority of a system handler.
+ * @note The parameters are not tested for correctness.
+ *
+ * @param[in] handler the system handler number
+ * @param[in] prio the system handler priority mask
+ */
+void nvicSetSystemHandlerPriority(IRQn_Type handler, uint32_t prio) {
+
+ SCB->SHP[((uint32_t)(handler) & 15) - 4] = NVIC_PRIORITY_MASK(prio);
+}
+
+/** @} */
diff --git a/os/hal/platforms/common/ARMCMx/nvic.h b/os/hal/platforms/common/ARMCMx/nvic.h new file mode 100644 index 000000000..82fde801c --- /dev/null +++ b/os/hal/platforms/common/ARMCMx/nvic.h @@ -0,0 +1,69 @@ +/*
+ ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+/**
+ * @file common/ARMCMx/nvic.h
+ * @brief Cortex-Mx NVIC support macros and structures.
+ *
+ * @addtogroup COMMON_ARMCMx_NVIC
+ * @{
+ */
+
+#ifndef _NVIC_H_
+#define _NVIC_H_
+
+/*===========================================================================*/
+/* Driver constants. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver pre-compile time settings. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Derived constants and error checks. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver data structures and types. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver macros. */
+/*===========================================================================*/
+
+/**
+ * @brief Priority level to priority mask conversion macro.
+ */
+#define NVIC_PRIORITY_MASK(prio) ((prio) << (8 - __NVIC_PRIO_BITS))
+
+/*===========================================================================*/
+/* External declarations. */
+/*===========================================================================*/
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+ void nvicEnableVector(IRQn_Type n, uint32_t prio);
+ void nvicDisableVector(IRQn_Type n);
+ void nvicSetSystemHandlerPriority(IRQn_Type handler, uint32_t prio);
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* _NVIC_H_ */
+
+/** @} */
|