diff options
Diffstat (limited to 'os/hal/platforms/STM32F1xx')
-rw-r--r-- | os/hal/platforms/STM32F1xx/adc_lld.c | 229 | ||||
-rw-r--r-- | os/hal/platforms/STM32F1xx/adc_lld.h | 354 |
2 files changed, 583 insertions, 0 deletions
diff --git a/os/hal/platforms/STM32F1xx/adc_lld.c b/os/hal/platforms/STM32F1xx/adc_lld.c new file mode 100644 index 000000000..8a8027e55 --- /dev/null +++ b/os/hal/platforms/STM32F1xx/adc_lld.c @@ -0,0 +1,229 @@ +/*
+ ChibiOS/RT - Copyright (C) 2006,2007,2008,2009,2010,
+ 2011 Giovanni Di Sirio.
+
+ This file is part of ChibiOS/RT.
+
+ ChibiOS/RT is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 3 of the License, or
+ (at your option) any later version.
+
+ ChibiOS/RT is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+/**
+ * @file STM32/adc_lld.c
+ * @brief STM32 ADC subsystem low level driver source.
+ *
+ * @addtogroup ADC
+ * @{
+ */
+
+#include "ch.h"
+#include "hal.h"
+
+#if HAL_USE_ADC || defined(__DOXYGEN__)
+
+/*===========================================================================*/
+/* Driver exported variables. */
+/*===========================================================================*/
+
+/** @brief ADC1 driver identifier.*/
+#if STM32_ADC_USE_ADC1 || defined(__DOXYGEN__)
+ADCDriver ADCD1;
+#endif
+
+/*===========================================================================*/
+/* Driver local variables. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver local functions. */
+/*===========================================================================*/
+
+/**
+ * @brief Shared ADC DMA ISR service routine.
+ *
+ * @param[in] adcp pointer to the @p ADCDriver object
+ * @param[in] flags pre-shifted content of the ISR register
+ */
+static void adc_lld_serve_rx_interrupt(ADCDriver *adcp, uint32_t flags) {
+
+ /* DMA errors handling.*/
+#if defined(STM32_ADC_DMA_ERROR_HOOK)
+ if ((flags & DMA_ISR_TEIF1) != 0) {
+ STM32_ADC_DMA_ERROR_HOOK(spip);
+ }
+#else
+ (void)flags;
+#endif
+ if ((flags & DMA_ISR_HTIF1) != 0) {
+ /* Half transfer processing.*/
+ _adc_isr_half_code(adcp);
+ }
+ if ((flags & DMA_ISR_TCIF1) != 0) {
+ /* Transfer complete processing.*/
+ _adc_isr_full_code(adcp);
+ }
+}
+
+/*===========================================================================*/
+/* Driver interrupt handlers. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver exported functions. */
+/*===========================================================================*/
+
+/**
+ * @brief Low level ADC driver initialization.
+ *
+ * @notapi
+ */
+void adc_lld_init(void) {
+
+#if STM32_ADC_USE_ADC1
+ /* Driver initialization.*/
+ adcObjectInit(&ADCD1);
+ ADCD1.adc = ADC1;
+ ADCD1.dmachp = STM32_DMA1_CH1;
+ ADCD1.dmaccr = (STM32_ADC_ADC1_DMA_PRIORITY << 12) |
+ DMA_CCR1_EN | DMA_CCR1_MSIZE_0 | DMA_CCR1_PSIZE_0 |
+ DMA_CCR1_MINC | DMA_CCR1_TCIE | DMA_CCR1_TEIE;
+
+ /* Temporary activation.*/
+ RCC->APB2ENR |= RCC_APB2ENR_ADC1EN;
+ ADC1->CR1 = 0;
+ ADC1->CR2 = ADC_CR2_ADON;
+
+ /* Reset calibration just to be safe.*/
+ ADC1->CR2 = ADC_CR2_ADON | ADC_CR2_RSTCAL;
+ while ((ADC1->CR2 & ADC_CR2_RSTCAL) != 0)
+ ;
+
+ /* Calibration.*/
+ ADC1->CR2 = ADC_CR2_ADON | ADC_CR2_CAL;
+ while ((ADC1->CR2 & ADC_CR2_CAL) != 0)
+ ;
+
+ /* Return the ADC in low power mode.*/
+ ADC1->CR2 = 0;
+ RCC->APB2ENR &= ~RCC_APB2ENR_ADC1EN;
+#endif
+}
+
+/**
+ * @brief Configures and activates the ADC peripheral.
+ *
+ * @param[in] adcp pointer to the @p ADCDriver object
+ *
+ * @notapi
+ */
+void adc_lld_start(ADCDriver *adcp) {
+
+ /* If in stopped state then enables the ADC and DMA clocks.*/
+ if (adcp->state == ADC_STOP) {
+#if STM32_ADC_USE_ADC1
+ if (&ADCD1 == adcp) {
+ dmaAllocate(STM32_DMA1_ID, STM32_DMA_CHANNEL_1,
+ (stm32_dmaisr_t)adc_lld_serve_rx_interrupt, (void *)adcp);
+ NVICEnableVector(DMA1_Channel1_IRQn,
+ CORTEX_PRIORITY_MASK(STM32_ADC_ADC1_IRQ_PRIORITY));
+ dmaChannelSetPeripheral(adcp->dmachp, &ADC1->DR);
+ RCC->APB2ENR |= RCC_APB2ENR_ADC1EN;
+ }
+#endif
+
+ /* ADC setup, the calibration procedure has already been performed
+ during initialization.*/
+ adcp->adc->CR1 = ADC_CR1_SCAN;
+ adcp->adc->CR2 = 0;
+ }
+}
+
+/**
+ * @brief Deactivates the ADC peripheral.
+ *
+ * @param[in] adcp pointer to the @p ADCDriver object
+ *
+ * @notapi
+ */
+void adc_lld_stop(ADCDriver *adcp) {
+
+ /* If in ready state then disables the ADC clock.*/
+ if (adcp->state == ADC_READY) {
+#if STM32_ADC_USE_ADC1
+ if (&ADCD1 == adcp) {
+ ADC1->CR1 = 0;
+ ADC1->CR2 = 0;
+ NVICDisableVector(DMA1_Channel1_IRQn);
+ dmaRelease(STM32_DMA1_ID, STM32_DMA_CHANNEL_1);
+ RCC->APB2ENR &= ~RCC_APB2ENR_ADC1EN;
+ }
+#endif
+ }
+}
+
+/**
+ * @brief Starts an ADC conversion.
+ *
+ * @param[in] adcp pointer to the @p ADCDriver object
+ *
+ * @notapi
+ */
+void adc_lld_start_conversion(ADCDriver *adcp) {
+ uint32_t ccr, n;
+ const ADCConversionGroup *grpp = adcp->grpp;
+
+ /* DMA setup.*/
+ ccr = adcp->dmaccr;
+ if (grpp->circular)
+ ccr |= DMA_CCR1_CIRC;
+ if (adcp->depth > 1) {
+ /* If the buffer depth is greater than one then the half transfer interrupt
+ interrupt is enabled in order to allows streaming processing.*/
+ ccr |= DMA_CCR1_HTIE;
+ n = (uint32_t)grpp->num_channels * (uint32_t)adcp->depth;
+ }
+ else
+ n = (uint32_t)grpp->num_channels;
+ dmaChannelSetup(adcp->dmachp, n, adcp->samples, ccr);
+
+ /* ADC setup.*/
+ adcp->adc->CR1 = grpp->cr1 | ADC_CR1_SCAN;
+ adcp->adc->CR2 = grpp->cr2 | ADC_CR2_DMA |
+ ADC_CR2_CONT | ADC_CR2_ADON;
+ adcp->adc->SMPR1 = grpp->smpr1;
+ adcp->adc->SMPR2 = grpp->smpr2;
+ adcp->adc->SQR1 = grpp->sqr1;
+ adcp->adc->SQR2 = grpp->sqr2;
+ adcp->adc->SQR3 = grpp->sqr3;
+
+ /* ADC start by writing ADC_CR2_ADON a second time.*/
+ adcp->adc->CR2 = grpp->cr2 | ADC_CR2_DMA |
+ ADC_CR2_CONT | ADC_CR2_ADON;
+}
+
+/**
+ * @brief Stops an ongoing conversion.
+ *
+ * @param[in] adcp pointer to the @p ADCDriver object
+ *
+ * @notapi
+ */
+void adc_lld_stop_conversion(ADCDriver *adcp) {
+
+ dmaChannelDisable(adcp->dmachp);
+ adcp->adc->CR2 = 0;
+}
+
+#endif /* HAL_USE_ADC */
+
+/** @} */
diff --git a/os/hal/platforms/STM32F1xx/adc_lld.h b/os/hal/platforms/STM32F1xx/adc_lld.h new file mode 100644 index 000000000..ce93e60ed --- /dev/null +++ b/os/hal/platforms/STM32F1xx/adc_lld.h @@ -0,0 +1,354 @@ +/*
+ ChibiOS/RT - Copyright (C) 2006,2007,2008,2009,2010,
+ 2011 Giovanni Di Sirio.
+
+ This file is part of ChibiOS/RT.
+
+ ChibiOS/RT is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 3 of the License, or
+ (at your option) any later version.
+
+ ChibiOS/RT is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+/**
+ * @file STM32/adc_lld.h
+ * @brief STM32 ADC subsystem low level driver header.
+ *
+ * @addtogroup ADC
+ * @{
+ */
+
+#ifndef _ADC_LLD_H_
+#define _ADC_LLD_H_
+
+#if HAL_USE_ADC || defined(__DOXYGEN__)
+
+/*===========================================================================*/
+/* Driver constants. */
+/*===========================================================================*/
+
+#define ADC_CR2_EXTSEL_SRC(n) ((n) << 17) /**< @brief Trigger source. */
+#define ADC_CR2_EXTSEL_SWSTART (7 << 17) /**< @brief Software trigger. */
+
+#define ADC_CHANNEL_IN0 0 /**< @brief External analog input 0. */
+#define ADC_CHANNEL_IN1 1 /**< @brief External analog input 1. */
+#define ADC_CHANNEL_IN2 2 /**< @brief External analog input 2. */
+#define ADC_CHANNEL_IN3 3 /**< @brief External analog input 3. */
+#define ADC_CHANNEL_IN4 4 /**< @brief External analog input 4. */
+#define ADC_CHANNEL_IN5 5 /**< @brief External analog input 5. */
+#define ADC_CHANNEL_IN6 6 /**< @brief External analog input 6. */
+#define ADC_CHANNEL_IN7 7 /**< @brief External analog input 7. */
+#define ADC_CHANNEL_IN8 8 /**< @brief External analog input 8. */
+#define ADC_CHANNEL_IN9 9 /**< @brief External analog input 9. */
+#define ADC_CHANNEL_IN10 10 /**< @brief External analog input 10. */
+#define ADC_CHANNEL_IN11 11 /**< @brief External analog input 11. */
+#define ADC_CHANNEL_IN12 12 /**< @brief External analog input 12. */
+#define ADC_CHANNEL_IN13 13 /**< @brief External analog input 13. */
+#define ADC_CHANNEL_IN14 14 /**< @brief External analog input 14. */
+#define ADC_CHANNEL_IN15 15 /**< @brief External analog input 15. */
+#define ADC_CHANNEL_SENSOR 16 /**< @brief Internal temperature sensor.*/
+#define ADC_CHANNEL_VREFINT 17 /**< @brief Internal reference. */
+
+#define ADC_SAMPLE_1P5 0 /**< @brief 1.5 cycles sampling time. */
+#define ADC_SAMPLE_7P5 1 /**< @brief 7.5 cycles sampling time. */
+#define ADC_SAMPLE_13P5 2 /**< @brief 13.5 cycles sampling time. */
+#define ADC_SAMPLE_28P5 3 /**< @brief 28.5 cycles sampling time. */
+#define ADC_SAMPLE_41P5 4 /**< @brief 41.5 cycles sampling time. */
+#define ADC_SAMPLE_55P5 5 /**< @brief 55.5 cycles sampling time. */
+#define ADC_SAMPLE_71P5 6 /**< @brief 71.5 cycles sampling time. */
+#define ADC_SAMPLE_239P5 7 /**< @brief 239.5 cycles sampling time. */
+
+/*===========================================================================*/
+/* Driver pre-compile time settings. */
+/*===========================================================================*/
+
+/**
+ * @brief ADC1 driver enable switch.
+ * @details If set to @p TRUE the support for ADC1 is included.
+ * @note The default is @p TRUE.
+ */
+#if !defined(STM32_ADC_USE_ADC1) || defined(__DOXYGEN__)
+#define STM32_ADC_USE_ADC1 TRUE
+#endif
+
+/**
+ * @brief ADC1 DMA priority (0..3|lowest..highest).
+ */
+#if !defined(STM32_ADC_ADC1_DMA_PRIORITY) || defined(__DOXYGEN__)
+#define STM32_ADC_ADC1_DMA_PRIORITY 2
+#endif
+
+/**
+ * @brief ADC1 interrupt priority level setting.
+ */
+#if !defined(STM32_ADC_ADC1_IRQ_PRIORITY) || defined(__DOXYGEN__)
+#define STM32_ADC_ADC1_IRQ_PRIORITY 5
+#endif
+
+/**
+ * @brief ADC DMA error hook.
+ * @note The default action for DMA errors is a system halt because DMA
+ * error can only happen because programming errors.
+ */
+#if !defined(STM32_ADC_DMA_ERROR_HOOK) || defined(__DOXYGEN__)
+#define STM32_ADC_DMA_ERROR_HOOK(adcp) chSysHalt()
+#endif
+
+/*===========================================================================*/
+/* Derived constants and error checks. */
+/*===========================================================================*/
+
+#if STM32_ADC_USE_ADC1 && !STM32_HAS_ADC1
+#error "ADC1 not present in the selected device"
+#endif
+
+#if !STM32_ADC_USE_ADC1
+#error "ADC driver activated but no ADC peripheral assigned"
+#endif
+
+#if !defined(STM32_DMA_REQUIRED)
+#define STM32_DMA_REQUIRED
+#endif
+
+/*===========================================================================*/
+/* Driver data structures and types. */
+/*===========================================================================*/
+
+/**
+ * @brief ADC sample data type.
+ */
+typedef uint16_t adcsample_t;
+
+/**
+ * @brief Channels number in a conversion group.
+ */
+typedef uint16_t adc_channels_num_t;
+
+/**
+ * @brief Type of a structure representing an ADC driver.
+ */
+typedef struct ADCDriver ADCDriver;
+
+/**
+ * @brief ADC notification callback type.
+ *
+ * @param[in] adcp pointer to the @p ADCDriver object triggering the
+ * callback
+ * @param[in] buffer pointer to the most recent samples data
+ * @param[in] n number of buffer rows available starting from @p buffer
+ */
+typedef void (*adccallback_t)(ADCDriver *adcp, adcsample_t *buffer, size_t n);
+
+/**
+ * @brief Conversion group configuration structure.
+ * @details This implementation-dependent structure describes a conversion
+ * operation.
+ * @note The use of this configuration structure requires knowledge of
+ * STM32 ADC cell registers interface, please refer to the STM32
+ * reference manual for details.
+ */
+typedef struct {
+ /**
+ * @brief Enables the circular buffer mode for the group.
+ */
+ bool_t circular;
+ /**
+ * @brief Number of the analog channels belonging to the conversion group.
+ */
+ adc_channels_num_t num_channels;
+ /**
+ * @brief Callback function associated to the group or @p NULL.
+ */
+ adccallback_t end_cb;
+ /* End of the mandatory fields.*/
+ /**
+ * @brief ADC CR1 register initialization data.
+ * @note All the required bits must be defined into this field except
+ * @p ADC_CR1_SCAN that is enforced inside the driver.
+ */
+ uint32_t cr1;
+ /**
+ * @brief ADC CR2 register initialization data.
+ * @note All the required bits must be defined into this field except
+ * @p ADC_CR2_DMA, @p ADC_CR2_CONT and @p ADC_CR2_ADON that are
+ * enforced inside the driver.
+ */
+ uint32_t cr2;
+ /**
+ * @brief ADC SMPR1 register initialization data.
+ * @details In this field must be specified the sample times for channels
+ * 10...17.
+ */
+ uint32_t smpr1;
+ /**
+ * @brief ADC SMPR2 register initialization data.
+ * @details In this field must be specified the sample times for channels
+ * 0...9.
+ */
+ uint32_t smpr2;
+ /**
+ * @brief ADC SQR1 register initialization data.
+ * @details Conversion group sequence 13...16 + sequence length.
+ */
+ uint32_t sqr1;
+ /**
+ * @brief ADC SQR2 register initialization data.
+ * @details Conversion group sequence 7...12.
+ */
+ uint32_t sqr2;
+ /**
+ * @brief ADC SQR3 register initialization data.
+ * @details Conversion group sequence 0...6.
+ */
+ uint32_t sqr3;
+} ADCConversionGroup;
+
+/**
+ * @brief Driver configuration structure.
+ * @note It could be empty on some architectures.
+ */
+typedef struct {
+ uint32_t dummy;
+} ADCConfig;
+
+/**
+ * @brief Structure representing an ADC driver.
+ */
+struct ADCDriver {
+ /**
+ * @brief Driver state.
+ */
+ adcstate_t state;
+ /**
+ * @brief Current configuration data.
+ */
+ const ADCConfig *config;
+ /**
+ * @brief Current samples buffer pointer or @p NULL.
+ */
+ adcsample_t *samples;
+ /**
+ * @brief Current samples buffer depth or @p 0.
+ */
+ size_t depth;
+ /**
+ * @brief Current conversion group pointer or @p NULL.
+ */
+ const ADCConversionGroup *grpp;
+#if ADC_USE_WAIT || defined(__DOXYGEN__)
+ /**
+ * @brief Waiting thread.
+ */
+ Thread *thread;
+#endif
+#if ADC_USE_MUTUAL_EXCLUSION || defined(__DOXYGEN__)
+#if CH_USE_MUTEXES || defined(__DOXYGEN__)
+ /**
+ * @brief Mutex protecting the peripheral.
+ */
+ Mutex mutex;
+#elif CH_USE_SEMAPHORES
+ Semaphore semaphore;
+#endif
+#endif /* ADC_USE_MUTUAL_EXCLUSION */
+#if defined(ADC_DRIVER_EXT_FIELDS)
+ ADC_DRIVER_EXT_FIELDS
+#endif
+ /* End of the mandatory fields.*/
+ /**
+ * @brief Pointer to the ADCx registers block.
+ */
+ ADC_TypeDef *adc;
+ /**
+ * @brief Pointer to the DMA registers block.
+ */
+ stm32_dma_channel_t *dmachp;
+ /**
+ * @brief DMA CCR register bit mask.
+ */
+ uint32_t dmaccr;
+};
+
+/*===========================================================================*/
+/* Driver macros. */
+/*===========================================================================*/
+
+/**
+ * @brief Number of channels in a conversion sequence.
+ */
+#define ADC_SQR1_NUM_CH(n) (((n) - 1) << 20)
+
+#define ADC_SQR3_SQ1_N(n) ((n) << 0) /**< @brief 1st channel in seq. */
+#define ADC_SQR3_SQ2_N(n) ((n) << 5) /**< @brief 2nd channel in seq. */
+#define ADC_SQR3_SQ3_N(n) ((n) << 10) /**< @brief 3rd channel in seq. */
+#define ADC_SQR3_SQ4_N(n) ((n) << 15) /**< @brief 4th channel in seq. */
+#define ADC_SQR3_SQ5_N(n) ((n) << 20) /**< @brief 5th channel in seq. */
+#define ADC_SQR3_SQ6_N(n) ((n) << 25) /**< @brief 6th channel in seq. */
+
+#define ADC_SQR2_SQ7_N(n) ((n) << 0) /**< @brief 7th channel in seq. */
+#define ADC_SQR2_SQ8_N(n) ((n) << 5) /**< @brief 8th channel in seq. */
+#define ADC_SQR2_SQ9_N(n) ((n) << 10) /**< @brief 9th channel in seq. */
+#define ADC_SQR2_SQ10_N(n) ((n) << 15) /**< @brief 10th channel in seq.*/
+#define ADC_SQR2_SQ11_N(n) ((n) << 20) /**< @brief 11th channel in seq.*/
+#define ADC_SQR2_SQ12_N(n) ((n) << 25) /**< @brief 12th channel in seq.*/
+
+#define ADC_SQR1_SQ13_N(n) ((n) << 0) /**< @brief 13th channel in seq.*/
+#define ADC_SQR1_SQ14_N(n) ((n) << 5) /**< @brief 14th channel in seq.*/
+#define ADC_SQR1_SQ15_N(n) ((n) << 10) /**< @brief 15th channel in seq.*/
+#define ADC_SQR1_SQ16_N(n) ((n) << 15) /**< @brief 16th channel in seq.*/
+
+#define ADC_SMPR2_SMP_AN0(n) ((n) << 0) /**< @brief AN0 sampling time. */
+#define ADC_SMPR2_SMP_AN1(n) ((n) << 3) /**< @brief AN1 sampling time. */
+#define ADC_SMPR2_SMP_AN2(n) ((n) << 6) /**< @brief AN2 sampling time. */
+#define ADC_SMPR2_SMP_AN3(n) ((n) << 9) /**< @brief AN3 sampling time. */
+#define ADC_SMPR2_SMP_AN4(n) ((n) << 12) /**< @brief AN4 sampling time. */
+#define ADC_SMPR2_SMP_AN5(n) ((n) << 15) /**< @brief AN5 sampling time. */
+#define ADC_SMPR2_SMP_AN6(n) ((n) << 18) /**< @brief AN6 sampling time. */
+#define ADC_SMPR2_SMP_AN7(n) ((n) << 21) /**< @brief AN7 sampling time. */
+#define ADC_SMPR2_SMP_AN8(n) ((n) << 24) /**< @brief AN8 sampling time. */
+#define ADC_SMPR2_SMP_AN9(n) ((n) << 27) /**< @brief AN9 sampling time. */
+
+#define ADC_SMPR1_SMP_AN10(n) ((n) << 0) /**< @brief AN10 sampling time. */
+#define ADC_SMPR1_SMP_AN11(n) ((n) << 3) /**< @brief AN11 sampling time. */
+#define ADC_SMPR1_SMP_AN12(n) ((n) << 6) /**< @brief AN12 sampling time. */
+#define ADC_SMPR1_SMP_AN13(n) ((n) << 9) /**< @brief AN13 sampling time. */
+#define ADC_SMPR1_SMP_AN14(n) ((n) << 12) /**< @brief AN14 sampling time. */
+#define ADC_SMPR1_SMP_AN15(n) ((n) << 15) /**< @brief AN15 sampling time. */
+#define ADC_SMPR1_SMP_SENSOR(n) ((n) << 18) /**< @brief Temperature Sensor
+ sampling time. */
+#define ADC_SMPR1_SMP_VREF(n) ((n) << 21) /**< @brief Voltage Reference
+ sampling time. */
+
+/*===========================================================================*/
+/* External declarations. */
+/*===========================================================================*/
+
+#if STM32_ADC_USE_ADC1 && !defined(__DOXYGEN__)
+extern ADCDriver ADCD1;
+#endif
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+ void adc_lld_init(void);
+ void adc_lld_start(ADCDriver *adcp);
+ void adc_lld_stop(ADCDriver *adcp);
+ void adc_lld_start_conversion(ADCDriver *adcp);
+ void adc_lld_stop_conversion(ADCDriver *adcp);
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* HAL_USE_ADC */
+
+#endif /* _ADC_LLD_H_ */
+
+/** @} */
|