diff options
Diffstat (limited to 'os/hal/platforms/STM32/I2Cv1')
-rw-r--r-- | os/hal/platforms/STM32/I2Cv1/i2c_lld.c | 907 | ||||
-rw-r--r-- | os/hal/platforms/STM32/I2Cv1/i2c_lld.h | 455 |
2 files changed, 1362 insertions, 0 deletions
diff --git a/os/hal/platforms/STM32/I2Cv1/i2c_lld.c b/os/hal/platforms/STM32/I2Cv1/i2c_lld.c new file mode 100644 index 000000000..229520a91 --- /dev/null +++ b/os/hal/platforms/STM32/I2Cv1/i2c_lld.c @@ -0,0 +1,907 @@ +/*
+ ChibiOS/RT - Copyright (C) 2006,2007,2008,2009,2010,
+ 2011,2012 Giovanni Di Sirio.
+
+ This file is part of ChibiOS/RT.
+
+ ChibiOS/RT is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 3 of the License, or
+ (at your option) any later version.
+
+ ChibiOS/RT is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+/*
+ Concepts and parts of this file have been contributed by Uladzimir Pylinsky
+ aka barthess.
+ */
+
+/**
+ * @file STM32/i2c_lld.c
+ * @brief STM32 I2C subsystem low level driver source.
+ *
+ * @addtogroup I2C
+ * @{
+ */
+
+#include "ch.h"
+#include "hal.h"
+
+#if HAL_USE_I2C || defined(__DOXYGEN__)
+
+/*===========================================================================*/
+/* Driver local definitions. */
+/*===========================================================================*/
+
+#define I2C1_RX_DMA_CHANNEL \
+ STM32_DMA_GETCHANNEL(STM32_I2C_I2C1_RX_DMA_STREAM, \
+ STM32_I2C1_RX_DMA_CHN)
+
+#define I2C1_TX_DMA_CHANNEL \
+ STM32_DMA_GETCHANNEL(STM32_I2C_I2C1_TX_DMA_STREAM, \
+ STM32_I2C1_TX_DMA_CHN)
+
+#define I2C2_RX_DMA_CHANNEL \
+ STM32_DMA_GETCHANNEL(STM32_I2C_I2C2_RX_DMA_STREAM, \
+ STM32_I2C2_RX_DMA_CHN)
+
+#define I2C2_TX_DMA_CHANNEL \
+ STM32_DMA_GETCHANNEL(STM32_I2C_I2C2_TX_DMA_STREAM, \
+ STM32_I2C2_TX_DMA_CHN)
+
+#define I2C3_RX_DMA_CHANNEL \
+ STM32_DMA_GETCHANNEL(STM32_I2C_I2C3_RX_DMA_STREAM, \
+ STM32_I2C3_RX_DMA_CHN)
+
+#define I2C3_TX_DMA_CHANNEL \
+ STM32_DMA_GETCHANNEL(STM32_I2C_I2C3_TX_DMA_STREAM, \
+ STM32_I2C3_TX_DMA_CHN)
+
+/*===========================================================================*/
+/* Driver constants. */
+/*===========================================================================*/
+
+#define I2C_EV5_MASTER_MODE_SELECT \
+ ((uint32_t)(((I2C_SR2_MSL | I2C_SR2_BUSY) << 16) | I2C_SR1_SB))
+#define I2C_EV6_MASTER_TRA_MODE_SELECTED \
+ ((uint32_t)(((I2C_SR2_MSL|I2C_SR2_BUSY|I2C_SR2_TRA) << 16) | \
+ I2C_SR1_ADDR|I2C_SR1_TXE))
+#define I2C_EV6_MASTER_REC_MODE_SELECTED \
+ ((uint32_t)(((I2C_SR2_MSL|I2C_SR2_BUSY)<< 16) | I2C_SR1_ADDR))
+#define I2C_EV8_2_MASTER_BYTE_TRANSMITTED \
+ ((uint32_t)(((I2C_SR2_MSL | I2C_SR2_BUSY | I2C_SR2_TRA) << 16) | \
+ I2C_SR1_BTF | I2C_SR1_TXE))
+#define I2C_EV_MASK 0x00FFFFFF
+
+/*===========================================================================*/
+/* Driver exported variables. */
+/*===========================================================================*/
+
+/** @brief I2C1 driver identifier.*/
+#if STM32_I2C_USE_I2C1 || defined(__DOXYGEN__)
+I2CDriver I2CD1;
+#endif
+
+/** @brief I2C2 driver identifier.*/
+#if STM32_I2C_USE_I2C2 || defined(__DOXYGEN__)
+I2CDriver I2CD2;
+#endif
+
+/** @brief I2C3 driver identifier.*/
+#if STM32_I2C_USE_I2C3 || defined(__DOXYGEN__)
+I2CDriver I2CD3;
+#endif
+
+/*===========================================================================*/
+/* Driver local variables. */
+/*===========================================================================*/
+
+/* The following variables have debugging purpose only and are included when
+ the option CH_DBG_ENABLE_ASSERTS is enabled.*/
+#if CH_DBG_ENABLE_ASSERTS
+static volatile uint16_t dbgSR1;
+static volatile uint16_t dbgSR2;
+static volatile uint16_t dbgCR1;
+static volatile uint16_t dbgCR2;
+#endif /* CH_DBG_ENABLE_ASSERTS */
+
+/*===========================================================================*/
+/* Driver local functions. */
+/*===========================================================================*/
+
+/**
+ * @brief Wakes up the waiting thread.
+ *
+ * @param[in] i2cp pointer to the @p I2CDriver object
+ * @param[in] msg wakeup message
+ *
+ * @notapi
+ */
+#define wakeup_isr(i2cp, msg) { \
+ chSysLockFromIsr(); \
+ if ((i2cp)->thread != NULL) { \
+ Thread *tp = (i2cp)->thread; \
+ (i2cp)->thread = NULL; \
+ tp->p_u.rdymsg = (msg); \
+ chSchReadyI(tp); \
+ } \
+ chSysUnlockFromIsr(); \
+}
+
+/**
+ * @brief Aborts an I2C transaction.
+ *
+ * @param[in] i2cp pointer to the @p I2CDriver object
+ *
+ * @notapi
+ */
+static void i2c_lld_abort_operation(I2CDriver *i2cp) {
+ I2C_TypeDef *dp = i2cp->i2c;
+
+ /* Stops the I2C peripheral.*/
+ dp->CR1 = I2C_CR1_SWRST;
+ dp->CR1 = 0;
+ dp->CR2 = 0;
+ dp->SR1 = 0;
+
+ /* Stops the associated DMA streams.*/
+ dmaStreamDisable(i2cp->dmatx);
+ dmaStreamDisable(i2cp->dmarx);
+}
+
+/**
+ * @brief Handling of stalled I2C transactions.
+ *
+ * @param[in] i2cp pointer to the @p I2CDriver object
+ *
+ * @notapi
+ */
+static void i2c_lld_safety_timeout(void *p) {
+ I2CDriver *i2cp = (I2CDriver *)p;
+
+ chSysLockFromIsr();
+ if (i2cp->thread) {
+ Thread *tp = i2cp->thread;
+ i2c_lld_abort_operation(i2cp);
+ i2cp->thread = NULL;
+ tp->p_u.rdymsg = RDY_TIMEOUT;
+ chSchReadyI(tp);
+ }
+ chSysUnlockFromIsr();
+}
+
+/**
+ * @brief Set clock speed.
+ *
+ * @param[in] i2cp pointer to the @p I2CDriver object
+ *
+ * @notapi
+ */
+static void i2c_lld_set_clock(I2CDriver *i2cp) {
+ I2C_TypeDef *dp = i2cp->i2c;
+ uint16_t regCCR, clock_div;
+ int32_t clock_speed = i2cp->config->clock_speed;
+ i2cdutycycle_t duty = i2cp->config->duty_cycle;
+
+ chDbgCheck((i2cp != NULL) && (clock_speed > 0) && (clock_speed <= 4000000),
+ "i2c_lld_set_clock");
+
+ /* CR2 Configuration.*/
+ dp->CR2 &= (uint16_t)~I2C_CR2_FREQ;
+ dp->CR2 |= (uint16_t)I2C_CLK_FREQ;
+
+ /* CCR Configuration.*/
+ regCCR = 0;
+ clock_div = I2C_CCR_CCR;
+
+ if (clock_speed <= 100000) {
+ /* Configure clock_div in standard mode.*/
+ chDbgAssert(duty == STD_DUTY_CYCLE,
+ "i2c_lld_set_clock(), #1",
+ "Invalid standard mode duty cycle");
+
+ /* Standard mode clock_div calculate: Tlow/Thigh = 1/1.*/
+ clock_div = (uint16_t)(STM32_PCLK1 / (clock_speed * 2));
+
+ /* Clock divider values under four are not allowed.*/
+ if (clock_div < 0x04)
+ clock_div = 0x04;
+ regCCR |= (clock_div & I2C_CCR_CCR);
+
+ /* Sets the Maximum Rise Time for standard mode.*/
+ dp->TRISE = I2C_CLK_FREQ + 1;
+ }
+ else if (clock_speed <= 400000) {
+ /* Configure clock_div in fast mode.*/
+ chDbgAssert((duty == FAST_DUTY_CYCLE_2) || (duty == FAST_DUTY_CYCLE_16_9),
+ "i2c_lld_set_clock(), #2",
+ "Invalid fast mode duty cycle");
+
+ if (duty == FAST_DUTY_CYCLE_2) {
+ /* Fast mode clock_div calculate: Tlow/Thigh = 2/1.*/
+ clock_div = (uint16_t)(STM32_PCLK1 / (clock_speed * 3));
+ }
+ else if (duty == FAST_DUTY_CYCLE_16_9) {
+ /* Fast mode clock_div calculate: Tlow/Thigh = 16/9.*/
+ clock_div = (uint16_t)(STM32_PCLK1 / (clock_speed * 25));
+ regCCR |= I2C_CCR_DUTY;
+ }
+ /* Clock divider values under one are not allowed.*/
+ if (clock_div < 0x01)
+ clock_div = 0x01;
+ regCCR |= (I2C_CCR_FS | (clock_div & I2C_CCR_CCR));
+
+ /* Sets the Maximum Rise Time for fast mode.*/
+ dp->TRISE = (I2C_CLK_FREQ * 300 / 1000) + 1;
+ }
+
+ chDbgAssert((clock_div <= I2C_CCR_CCR),
+ "i2c_lld_set_clock(), #3", "the selected clock is too low");
+
+ dp->CCR = regCCR;
+}
+
+/**
+ * @brief Set operation mode of I2C hardware.
+ *
+ * @param[in] i2cp pointer to the @p I2CDriver object
+ *
+ * @notapi
+ */
+static void i2c_lld_set_opmode(I2CDriver *i2cp) {
+ I2C_TypeDef *dp = i2cp->i2c;
+ i2copmode_t opmode = i2cp->config->op_mode;
+ uint16_t regCR1;
+
+ regCR1 = dp->CR1;
+ switch (opmode) {
+ case OPMODE_I2C:
+ regCR1 &= (uint16_t)~(I2C_CR1_SMBUS|I2C_CR1_SMBTYPE);
+ break;
+ case OPMODE_SMBUS_DEVICE:
+ regCR1 |= I2C_CR1_SMBUS;
+ regCR1 &= (uint16_t)~(I2C_CR1_SMBTYPE);
+ break;
+ case OPMODE_SMBUS_HOST:
+ regCR1 |= (I2C_CR1_SMBUS|I2C_CR1_SMBTYPE);
+ break;
+ }
+ dp->CR1 = regCR1;
+}
+
+/**
+ * @brief Return the last event value from I2C status registers.
+ * @details Important but implicit destination of this function is
+ * clearing interrupts flags.
+ * @note Internal use only.
+ *
+ * @param[in] i2cp pointer to the @p I2CDriver object
+ *
+ * @notapi
+ */
+static uint32_t i2c_get_event(I2CDriver *i2cp) {
+ I2C_TypeDef *dp = i2cp->i2c;
+ uint16_t regSR1 = dp->SR1;
+ uint16_t regSR2 = dp->SR2;
+
+#if CH_DBG_ENABLE_ASSERTS
+ dbgSR1 = regSR1;
+ dbgSR2 = regSR2;
+ dbgCR1 = dp->CR1;
+ dbgCR2 = dp->CR2;
+#endif /* CH_DBG_ENABLE_ASSERTS */
+
+ return (I2C_EV_MASK & (regSR1 | (regSR2 << 16)));
+}
+
+/**
+ * @brief I2C shared ISR code.
+ *
+ * @param[in] i2cp pointer to the @p I2CDriver object
+ *
+ * @notapi
+ */
+static void i2c_lld_serve_event_interrupt(I2CDriver *i2cp) {
+ I2C_TypeDef *dp = i2cp->i2c;
+
+ /* Interrupts are disabled just before dmaStreamEnable() because there
+ is no need of interrupts until next transaction begin. All the work is
+ done by the DMA.*/
+ switch (i2c_get_event(i2cp)) {
+ case I2C_EV5_MASTER_MODE_SELECT:
+ dp->DR = i2cp->addr;
+ break;
+ case I2C_EV6_MASTER_REC_MODE_SELECTED:
+ dp->CR2 &= ~I2C_CR2_ITEVTEN;
+ dmaStreamEnable(i2cp->dmarx);
+ dp->CR2 |= I2C_CR2_LAST; /* Needed in receiver mode. */
+ break;
+ case I2C_EV6_MASTER_TRA_MODE_SELECTED:
+ dp->CR2 &= ~I2C_CR2_ITEVTEN;
+ dmaStreamEnable(i2cp->dmatx);
+ break;
+ case I2C_EV8_2_MASTER_BYTE_TRANSMITTED:
+ /* Catches BTF event after the end of transmission.*/
+ if (dmaStreamGetTransactionSize(i2cp->dmarx) > 0) {
+ /* Starts "read after write" operation, LSB = 1 -> receive.*/
+ i2cp->addr |= 0x01;
+ dp->CR1 |= I2C_CR1_START | I2C_CR1_ACK;
+ return;
+ }
+ dp->CR2 &= ~I2C_CR2_ITEVTEN;
+ dp->CR1 |= I2C_CR1_STOP;
+ wakeup_isr(i2cp, RDY_OK);
+ break;
+ default:
+ break;
+ }
+}
+
+/**
+ * @brief DMA RX end IRQ handler.
+ *
+ * @param[in] i2cp pointer to the @p I2CDriver object
+ * @param[in] flags pre-shifted content of the ISR register
+ *
+ * @notapi
+ */
+static void i2c_lld_serve_rx_end_irq(I2CDriver *i2cp, uint32_t flags) {
+ I2C_TypeDef *dp = i2cp->i2c;
+
+ /* DMA errors handling.*/
+#if defined(STM32_I2C_DMA_ERROR_HOOK)
+ if ((flags & (STM32_DMA_ISR_TEIF | STM32_DMA_ISR_DMEIF)) != 0) {
+ STM32_I2C_DMA_ERROR_HOOK(i2cp);
+ }
+#else
+ (void)flags;
+#endif
+
+ dmaStreamDisable(i2cp->dmarx);
+
+ dp->CR2 &= ~I2C_CR2_LAST;
+ dp->CR1 &= ~I2C_CR1_ACK;
+ dp->CR1 |= I2C_CR1_STOP;
+ wakeup_isr(i2cp, RDY_OK);
+}
+
+/**
+ * @brief DMA TX end IRQ handler.
+ *
+ * @param[in] i2cp pointer to the @p I2CDriver object
+ *
+ * @notapi
+ */
+static void i2c_lld_serve_tx_end_irq(I2CDriver *i2cp, uint32_t flags) {
+ I2C_TypeDef *dp = i2cp->i2c;
+
+ /* DMA errors handling.*/
+#if defined(STM32_I2C_DMA_ERROR_HOOK)
+ if ((flags & (STM32_DMA_ISR_TEIF | STM32_DMA_ISR_DMEIF)) != 0) {
+ STM32_I2C_DMA_ERROR_HOOK(i2cp);
+ }
+#else
+ (void)flags;
+#endif
+
+ dmaStreamDisable(i2cp->dmatx);
+ /* Enables interrupts to catch BTF event meaning transmission part complete.
+ Interrupt handler will decide to generate STOP or to begin receiving part
+ of R/W transaction itself.*/
+ dp->CR2 |= I2C_CR2_ITEVTEN;
+}
+
+/**
+ * @brief I2C error handler.
+ *
+ * @param[in] i2cp pointer to the @p I2CDriver object
+ *
+ * @notapi
+ */
+static void i2c_lld_serve_error_interrupt(I2CDriver *i2cp) {
+ I2C_TypeDef *dp = i2cp->i2c;
+ i2cflags_t errors;
+
+ /* Clears interrupt flags just to be safe.*/
+ chSysLockFromIsr();
+ dmaStreamDisable(i2cp->dmatx);
+ dmaStreamDisable(i2cp->dmarx);
+ chSysUnlockFromIsr();
+
+ errors = I2CD_NO_ERROR;
+
+ if (dp->SR1 & I2C_SR1_BERR) { /* Bus error. */
+ dp->SR1 &= ~I2C_SR1_BERR;
+ errors |= I2CD_BUS_ERROR;
+ }
+ if (dp->SR1 & I2C_SR1_ARLO) { /* Arbitration lost. */
+ dp->SR1 &= ~I2C_SR1_ARLO;
+ errors |= I2CD_ARBITRATION_LOST;
+ }
+ if (dp->SR1 & I2C_SR1_AF) { /* Acknowledge fail. */
+ dp->SR1 &= ~I2C_SR1_AF;
+ dp->CR2 &= ~I2C_CR2_ITEVTEN;
+ dp->CR1 |= I2C_CR1_STOP; /* Setting stop bit. */
+ errors |= I2CD_ACK_FAILURE;
+ }
+ if (dp->SR1 & I2C_SR1_OVR) { /* Overrun. */
+ dp->SR1 &= ~I2C_SR1_OVR;
+ errors |= I2CD_OVERRUN;
+ }
+ if (dp->SR1 & I2C_SR1_PECERR) { /* PEC error. */
+ dp->SR1 &= ~I2C_SR1_PECERR;
+ errors |= I2CD_PEC_ERROR;
+ }
+ if (dp->SR1 & I2C_SR1_TIMEOUT) { /* SMBus Timeout. */
+ dp->SR1 &= ~I2C_SR1_TIMEOUT;
+ errors |= I2CD_TIMEOUT;
+ }
+ if (dp->SR1 & I2C_SR1_SMBALERT) { /* SMBus alert. */
+ dp->SR1 &= ~I2C_SR1_SMBALERT;
+ errors |= I2CD_SMB_ALERT;
+ }
+
+ /* If some error has been identified then sends wakes the waiting thread.*/
+ if (errors != I2CD_NO_ERROR) {
+ i2cp->errors = errors;
+ wakeup_isr(i2cp, RDY_RESET);
+ }
+}
+
+/*===========================================================================*/
+/* Driver interrupt handlers. */
+/*===========================================================================*/
+
+#if STM32_I2C_USE_I2C1 || defined(__DOXYGEN__)
+/**
+ * @brief I2C1 event interrupt handler.
+ *
+ * @notapi
+ */
+CH_IRQ_HANDLER(I2C1_EV_IRQHandler) {
+
+ CH_IRQ_PROLOGUE();
+
+ i2c_lld_serve_event_interrupt(&I2CD1);
+
+ CH_IRQ_EPILOGUE();
+}
+
+/**
+ * @brief I2C1 error interrupt handler.
+ */
+CH_IRQ_HANDLER(I2C1_ER_IRQHandler) {
+
+ CH_IRQ_PROLOGUE();
+
+ i2c_lld_serve_error_interrupt(&I2CD1);
+
+ CH_IRQ_EPILOGUE();
+}
+#endif /* STM32_I2C_USE_I2C1 */
+
+#if STM32_I2C_USE_I2C2 || defined(__DOXYGEN__)
+/**
+ * @brief I2C2 event interrupt handler.
+ *
+ * @notapi
+ */
+CH_IRQ_HANDLER(I2C2_EV_IRQHandler) {
+
+ CH_IRQ_PROLOGUE();
+
+ i2c_lld_serve_event_interrupt(&I2CD2);
+
+ CH_IRQ_EPILOGUE();
+}
+
+/**
+ * @brief I2C2 error interrupt handler.
+ *
+ * @notapi
+ */
+CH_IRQ_HANDLER(I2C2_ER_IRQHandler) {
+
+ CH_IRQ_PROLOGUE();
+
+ i2c_lld_serve_error_interrupt(&I2CD2);
+
+ CH_IRQ_EPILOGUE();
+}
+#endif /* STM32_I2C_USE_I2C2 */
+
+#if STM32_I2C_USE_I2C3 || defined(__DOXYGEN__)
+/**
+ * @brief I2C3 event interrupt handler.
+ *
+ * @notapi
+ */
+CH_IRQ_HANDLER(I2C3_EV_IRQHandler) {
+
+ CH_IRQ_PROLOGUE();
+
+ i2c_lld_serve_event_interrupt(&I2CD3);
+
+ CH_IRQ_EPILOGUE();
+}
+
+/**
+ * @brief I2C3 error interrupt handler.
+ *
+ * @notapi
+ */
+CH_IRQ_HANDLER(I2C3_ER_IRQHandler) {
+
+ CH_IRQ_PROLOGUE();
+
+ i2c_lld_serve_error_interrupt(&I2CD3);
+
+ CH_IRQ_EPILOGUE();
+}
+#endif /* STM32_I2C_USE_I2C3 */
+
+/*===========================================================================*/
+/* Driver exported functions. */
+/*===========================================================================*/
+
+/**
+ * @brief Low level I2C driver initialization.
+ *
+ * @notapi
+ */
+void i2c_lld_init(void) {
+
+#if STM32_I2C_USE_I2C1
+ i2cObjectInit(&I2CD1);
+ I2CD1.thread = NULL;
+ I2CD1.i2c = I2C1;
+ I2CD1.dmarx = STM32_DMA_STREAM(STM32_I2C_I2C1_RX_DMA_STREAM);
+ I2CD1.dmatx = STM32_DMA_STREAM(STM32_I2C_I2C1_TX_DMA_STREAM);
+#endif /* STM32_I2C_USE_I2C1 */
+
+#if STM32_I2C_USE_I2C2
+ i2cObjectInit(&I2CD2);
+ I2CD2.thread = NULL;
+ I2CD2.i2c = I2C2;
+ I2CD2.dmarx = STM32_DMA_STREAM(STM32_I2C_I2C2_RX_DMA_STREAM);
+ I2CD2.dmatx = STM32_DMA_STREAM(STM32_I2C_I2C2_TX_DMA_STREAM);
+#endif /* STM32_I2C_USE_I2C2 */
+
+#if STM32_I2C_USE_I2C3
+ i2cObjectInit(&I2CD3);
+ I2CD3.thread = NULL;
+ I2CD3.i2c = I2C3;
+ I2CD3.dmarx = STM32_DMA_STREAM(STM32_I2C_I2C3_RX_DMA_STREAM);
+ I2CD3.dmatx = STM32_DMA_STREAM(STM32_I2C_I2C3_TX_DMA_STREAM);
+#endif /* STM32_I2C_USE_I2C3 */
+}
+
+/**
+ * @brief Configures and activates the I2C peripheral.
+ *
+ * @param[in] i2cp pointer to the @p I2CDriver object
+ *
+ * @notapi
+ */
+void i2c_lld_start(I2CDriver *i2cp) {
+ I2C_TypeDef *dp = i2cp->i2c;
+
+ i2cp->dmamode = STM32_DMA_CR_PSIZE_BYTE | STM32_DMA_CR_MSIZE_BYTE |
+ STM32_DMA_CR_MINC | STM32_DMA_CR_DMEIE | STM32_DMA_CR_TEIE |
+ STM32_DMA_CR_TCIE;
+
+ /* If in stopped state then enables the I2C and DMA clocks.*/
+ if (i2cp->state == I2C_STOP) {
+
+#if STM32_I2C_USE_I2C1
+ if (&I2CD1 == i2cp) {
+ bool_t b;
+
+ rccResetI2C1();
+ b = dmaStreamAllocate(i2cp->dmarx,
+ STM32_I2C_I2C1_IRQ_PRIORITY,
+ (stm32_dmaisr_t)i2c_lld_serve_rx_end_irq,
+ (void *)i2cp);
+ chDbgAssert(!b, "i2c_lld_start(), #1", "stream already allocated");
+ b = dmaStreamAllocate(i2cp->dmatx,
+ STM32_I2C_I2C1_IRQ_PRIORITY,
+ (stm32_dmaisr_t)i2c_lld_serve_tx_end_irq,
+ (void *)i2cp);
+ chDbgAssert(!b, "i2c_lld_start(), #2", "stream already allocated");
+ rccEnableI2C1(FALSE);
+ nvicEnableVector(I2C1_EV_IRQn,
+ CORTEX_PRIORITY_MASK(STM32_I2C_I2C1_IRQ_PRIORITY));
+ nvicEnableVector(I2C1_ER_IRQn,
+ CORTEX_PRIORITY_MASK(STM32_I2C_I2C1_IRQ_PRIORITY));
+
+ i2cp->dmamode |= STM32_DMA_CR_CHSEL(I2C1_RX_DMA_CHANNEL) |
+ STM32_DMA_CR_PL(STM32_I2C_I2C1_DMA_PRIORITY);
+ }
+#endif /* STM32_I2C_USE_I2C1 */
+
+#if STM32_I2C_USE_I2C2
+ if (&I2CD2 == i2cp) {
+ bool_t b;
+
+ rccResetI2C2();
+ b = dmaStreamAllocate(i2cp->dmarx,
+ STM32_I2C_I2C2_IRQ_PRIORITY,
+ (stm32_dmaisr_t)i2c_lld_serve_rx_end_irq,
+ (void *)i2cp);
+ chDbgAssert(!b, "i2c_lld_start(), #3", "stream already allocated");
+ b = dmaStreamAllocate(i2cp->dmatx,
+ STM32_I2C_I2C2_IRQ_PRIORITY,
+ (stm32_dmaisr_t)i2c_lld_serve_tx_end_irq,
+ (void *)i2cp);
+ chDbgAssert(!b, "i2c_lld_start(), #4", "stream already allocated");
+ rccEnableI2C2(FALSE);
+ nvicEnableVector(I2C2_EV_IRQn,
+ CORTEX_PRIORITY_MASK(STM32_I2C_I2C2_IRQ_PRIORITY));
+ nvicEnableVector(I2C2_ER_IRQn,
+ CORTEX_PRIORITY_MASK(STM32_I2C_I2C2_IRQ_PRIORITY));
+
+ i2cp->dmamode |= STM32_DMA_CR_CHSEL(I2C2_RX_DMA_CHANNEL) |
+ STM32_DMA_CR_PL(STM32_I2C_I2C2_DMA_PRIORITY);
+ }
+#endif /* STM32_I2C_USE_I2C2 */
+
+#if STM32_I2C_USE_I2C3
+ if (&I2CD3 == i2cp) {
+ bool_t b;
+
+ rccResetI2C3();
+ b = dmaStreamAllocate(i2cp->dmarx,
+ STM32_I2C_I2C3_IRQ_PRIORITY,
+ (stm32_dmaisr_t)i2c_lld_serve_rx_end_irq,
+ (void *)i2cp);
+ chDbgAssert(!b, "i2c_lld_start(), #5", "stream already allocated");
+ b = dmaStreamAllocate(i2cp->dmatx,
+ STM32_I2C_I2C3_IRQ_PRIORITY,
+ (stm32_dmaisr_t)i2c_lld_serve_tx_end_irq,
+ (void *)i2cp);
+ chDbgAssert(!b, "i2c_lld_start(), #6", "stream already allocated");
+ rccEnableI2C3(FALSE);
+ nvicEnableVector(I2C3_EV_IRQn,
+ CORTEX_PRIORITY_MASK(STM32_I2C_I2C3_IRQ_PRIORITY));
+ nvicEnableVector(I2C3_ER_IRQn,
+ CORTEX_PRIORITY_MASK(STM32_I2C_I2C3_IRQ_PRIORITY));
+
+ i2cp->dmamode |= STM32_DMA_CR_CHSEL(I2C3_RX_DMA_CHANNEL) |
+ STM32_DMA_CR_PL(STM32_I2C_I2C3_DMA_PRIORITY);
+ }
+#endif /* STM32_I2C_USE_I2C3 */
+ }
+
+ /* DMA streams mode preparation in advance.*/
+ dmaStreamSetMode(i2cp->dmatx, i2cp->dmamode | STM32_DMA_CR_DIR_M2P);
+ dmaStreamSetMode(i2cp->dmarx, i2cp->dmamode | STM32_DMA_CR_DIR_P2M);
+
+ /* I2C registers pointed by the DMA.*/
+ dmaStreamSetPeripheral(i2cp->dmarx, &dp->DR);
+ dmaStreamSetPeripheral(i2cp->dmatx, &dp->DR);
+
+ /* Reset i2c peripheral.*/
+ dp->CR1 = I2C_CR1_SWRST;
+ dp->CR1 = 0;
+ dp->CR2 = I2C_CR2_ITERREN | I2C_CR2_DMAEN;
+
+ /* Setup I2C parameters.*/
+ i2c_lld_set_clock(i2cp);
+ i2c_lld_set_opmode(i2cp);
+
+ /* Ready to go.*/
+ dp->CR1 |= I2C_CR1_PE;
+}
+
+/**
+ * @brief Deactivates the I2C peripheral.
+ *
+ * @param[in] i2cp pointer to the @p I2CDriver object
+ *
+ * @notapi
+ */
+void i2c_lld_stop(I2CDriver *i2cp) {
+
+ /* If not in stopped state then disables the I2C clock.*/
+ if (i2cp->state != I2C_STOP) {
+
+ /* I2C disable.*/
+ i2c_lld_abort_operation(i2cp);
+ dmaStreamRelease(i2cp->dmatx);
+ dmaStreamRelease(i2cp->dmarx);
+
+#if STM32_I2C_USE_I2C1
+ if (&I2CD1 == i2cp) {
+ nvicDisableVector(I2C1_EV_IRQn);
+ nvicDisableVector(I2C1_ER_IRQn);
+ rccDisableI2C1(FALSE);
+ }
+#endif
+
+#if STM32_I2C_USE_I2C2
+ if (&I2CD2 == i2cp) {
+ nvicDisableVector(I2C2_EV_IRQn);
+ nvicDisableVector(I2C2_ER_IRQn);
+ rccDisableI2C2(FALSE);
+ }
+#endif
+
+#if STM32_I2C_USE_I2C3
+ if (&I2CD3 == i2cp) {
+ nvicDisableVector(I2C3_EV_IRQn);
+ nvicDisableVector(I2C3_ER_IRQn);
+ rccDisableI2C3(FALSE);
+ }
+#endif
+ }
+}
+
+/**
+ * @brief Receives data via the I2C bus as master.
+ * @details Number of receiving bytes must be more than 1 because of stm32
+ * hardware restrictions.
+ *
+ * @param[in] i2cp pointer to the @p I2CDriver object
+ * @param[in] addr slave device address
+ * @param[out] rxbuf pointer to the receive buffer
+ * @param[in] rxbytes number of bytes to be received
+ * @param[in] timeout the number of ticks before the operation timeouts,
+ * the following special values are allowed:
+ * - @a TIME_INFINITE no timeout.
+ * .
+ * @return The operation status.
+ * @retval RDY_OK if the function succeeded.
+ * @retval RDY_RESET if one or more I2C errors occurred, the errors can
+ * be retrieved using @p i2cGetErrors().
+ * @retval RDY_TIMEOUT if a timeout occurred before operation end. <b>After a
+ * timeout the driver must be stopped and restarted
+ * because the bus is in an uncertain state</b>.
+ *
+ * @notapi
+ */
+msg_t i2c_lld_master_receive_timeout(I2CDriver *i2cp, i2caddr_t addr,
+ uint8_t *rxbuf, size_t rxbytes,
+ systime_t timeout) {
+ I2C_TypeDef *dp = i2cp->i2c;
+ VirtualTimer vt;
+
+ chDbgCheck((rxbytes > 1), "i2c_lld_master_receive_timeout");
+
+ /* Global timeout for the whole operation.*/
+ if (timeout != TIME_INFINITE)
+ chVTSetI(&vt, timeout, i2c_lld_safety_timeout, (void *)i2cp);
+
+ /* Releases the lock from high level driver.*/
+ chSysUnlock();
+
+ /* Initializes driver fields, LSB = 1 -> receive.*/
+ i2cp->addr = (addr << 1) | 0x01;
+ i2cp->errors = 0;
+
+ /* RX DMA setup.*/
+ dmaStreamSetMemory0(i2cp->dmarx, rxbuf);
+ dmaStreamSetTransactionSize(i2cp->dmarx, rxbytes);
+
+ /* Waits until BUSY flag is reset and the STOP from the previous operation
+ is completed, alternatively for a timeout condition.*/
+ while ((dp->SR2 & I2C_SR2_BUSY) || (dp->CR1 & I2C_CR1_STOP)) {
+ chSysLock();
+ if (!chVTIsArmedI(&vt))
+ return RDY_TIMEOUT;
+ chSysUnlock();
+ }
+
+ /* This lock will be released in high level driver.*/
+ chSysLock();
+
+ /* Atomic check on the timer in order to make sure that a timeout didn't
+ happen outside the critical zone.*/
+ if (!chVTIsArmedI(&vt))
+ return RDY_TIMEOUT;
+
+ /* Starts the operation.*/
+ dp->CR2 |= I2C_CR2_ITEVTEN;
+ dp->CR1 |= I2C_CR1_START | I2C_CR1_ACK;
+
+ /* Waits for the operation completion or a timeout.*/
+ i2cp->thread = chThdSelf();
+ chSchGoSleepS(THD_STATE_SUSPENDED);
+ if (chVTIsArmedI(&vt))
+ chVTResetI(&vt);
+
+ return chThdSelf()->p_u.rdymsg;
+}
+
+/**
+ * @brief Transmits data via the I2C bus as master.
+ * @details Number of receiving bytes must be 0 or more than 1 because of stm32
+ * hardware restrictions.
+ *
+ * @param[in] i2cp pointer to the @p I2CDriver object
+ * @param[in] addr slave device address
+ * @param[in] txbuf pointer to the transmit buffer
+ * @param[in] txbytes number of bytes to be transmitted
+ * @param[out] rxbuf pointer to the receive buffer
+ * @param[in] rxbytes number of bytes to be received
+ * @param[in] timeout the number of ticks before the operation timeouts,
+ * the following special values are allowed:
+ * - @a TIME_INFINITE no timeout.
+ * .
+ * @return The operation status.
+ * @retval RDY_OK if the function succeeded.
+ * @retval RDY_RESET if one or more I2C errors occurred, the errors can
+ * be retrieved using @p i2cGetErrors().
+ * @retval RDY_TIMEOUT if a timeout occurred before operation end. <b>After a
+ * timeout the driver must be stopped and restarted
+ * because the bus is in an uncertain state</b>.
+ *
+ * @notapi
+ */
+msg_t i2c_lld_master_transmit_timeout(I2CDriver *i2cp, i2caddr_t addr,
+ const uint8_t *txbuf, size_t txbytes,
+ uint8_t *rxbuf, size_t rxbytes,
+ systime_t timeout) {
+ I2C_TypeDef *dp = i2cp->i2c;
+ VirtualTimer vt;
+
+ chDbgCheck(((rxbytes == 0) || ((rxbytes > 1) && (rxbuf != NULL))),
+ "i2c_lld_master_transmit_timeout");
+
+ /* Global timeout for the whole operation.*/
+ if (timeout != TIME_INFINITE)
+ chVTSetI(&vt, timeout, i2c_lld_safety_timeout, (void *)i2cp);
+
+ /* Releases the lock from high level driver.*/
+ chSysUnlock();
+
+ /* Initializes driver fields, LSB = 0 -> write.*/
+ i2cp->addr = addr << 1;
+ i2cp->errors = 0;
+
+ /* TX DMA setup.*/
+ dmaStreamSetMemory0(i2cp->dmatx, txbuf);
+ dmaStreamSetTransactionSize(i2cp->dmatx, txbytes);
+
+ /* RX DMA setup.*/
+ dmaStreamSetMemory0(i2cp->dmarx, rxbuf);
+ dmaStreamSetTransactionSize(i2cp->dmarx, rxbytes);
+
+ /* Waits until BUSY flag is reset and the STOP from the previous operation
+ is completed, alternatively for a timeout condition.*/
+ while ((dp->SR2 & I2C_SR2_BUSY) || (dp->CR1 & I2C_CR1_STOP)) {
+ chSysLock();
+ if (!chVTIsArmedI(&vt))
+ return RDY_TIMEOUT;
+ chSysUnlock();
+ }
+
+ /* This lock will be released in high level driver.*/
+ chSysLock();
+
+ /* Atomic check on the timer in order to make sure that a timeout didn't
+ happen outside the critical zone.*/
+ if (!chVTIsArmedI(&vt))
+ return RDY_TIMEOUT;
+
+ /* Starts the operation.*/
+ dp->CR2 |= I2C_CR2_ITEVTEN;
+ dp->CR1 |= I2C_CR1_START;
+
+ /* Waits for the operation completion or a timeout.*/
+ i2cp->thread = chThdSelf();
+ chSchGoSleepS(THD_STATE_SUSPENDED);
+ if (chVTIsArmedI(&vt))
+ chVTResetI(&vt);
+
+ return chThdSelf()->p_u.rdymsg;
+}
+
+#endif /* HAL_USE_I2C */
+
+/** @} */
diff --git a/os/hal/platforms/STM32/I2Cv1/i2c_lld.h b/os/hal/platforms/STM32/I2Cv1/i2c_lld.h new file mode 100644 index 000000000..55870cb37 --- /dev/null +++ b/os/hal/platforms/STM32/I2Cv1/i2c_lld.h @@ -0,0 +1,455 @@ +/*
+ ChibiOS/RT - Copyright (C) 2006,2007,2008,2009,2010,
+ 2011,2012 Giovanni Di Sirio.
+
+ This file is part of ChibiOS/RT.
+
+ ChibiOS/RT is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 3 of the License, or
+ (at your option) any later version.
+
+ ChibiOS/RT is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+/*
+ Concepts and parts of this file have been contributed by Uladzimir Pylinsky
+ aka barthess.
+ */
+
+/**
+ * @file STM32/i2c_lld.h
+ * @brief STM32 I2C subsystem low level driver header.
+ *
+ * @addtogroup I2C
+ * @{
+ */
+
+#ifndef _I2C_LLD_H_
+#define _I2C_LLD_H_
+
+#if HAL_USE_I2C || defined(__DOXYGEN__)
+
+/*===========================================================================*/
+/* Driver constants. */
+/*===========================================================================*/
+
+/**
+ * @brief Peripheral clock frequency.
+ */
+#define I2C_CLK_FREQ ((STM32_PCLK1) / 1000000)
+
+/*===========================================================================*/
+/* Driver pre-compile time settings. */
+/*===========================================================================*/
+
+/**
+ * @name Configuration options
+ * @{
+ */
+/**
+ * @brief I2C1 driver enable switch.
+ * @details If set to @p TRUE the support for I2C1 is included.
+ * @note The default is @p FALSE.
+ */
+#if !defined(STM32_I2C_USE_I2C1) || defined(__DOXYGEN__)
+#define STM32_I2C_USE_I2C1 FALSE
+#endif
+
+/**
+ * @brief I2C2 driver enable switch.
+ * @details If set to @p TRUE the support for I2C2 is included.
+ * @note The default is @p FALSE.
+ */
+#if !defined(STM32_I2C_USE_I2C2) || defined(__DOXYGEN__)
+#define STM32_I2C_USE_I2C2 FALSE
+#endif
+
+/**
+ * @brief I2C3 driver enable switch.
+ * @details If set to @p TRUE the support for I2C3 is included.
+ * @note The default is @p FALSE.
+ */
+#if !defined(STM32_I2C_USE_I2C3) || defined(__DOXYGEN__)
+#define STM32_I2C_USE_I2C3 FALSE
+#endif
+
+/**
+ * @brief I2C1 interrupt priority level setting.
+ */
+#if !defined(STM32_I2C_I2C1_IRQ_PRIORITY) || defined(__DOXYGEN__)
+#define STM32_I2C_I2C1_IRQ_PRIORITY 10
+#endif
+
+/**
+ * @brief I2C2 interrupt priority level setting.
+ */
+#if !defined(STM32_I2C_I2C2_IRQ_PRIORITY) || defined(__DOXYGEN__)
+#define STM32_I2C_I2C2_IRQ_PRIORITY 10
+#endif
+
+/**
+ * @brief I2C3 interrupt priority level setting.
+ */
+#if !defined(STM32_I2C_I2C3_IRQ_PRIORITY) || defined(__DOXYGEN__)
+#define STM32_I2C_I2C3_IRQ_PRIORITY 10
+#endif
+
+/**
+* @brief I2C1 DMA priority (0..3|lowest..highest).
+* @note The priority level is used for both the TX and RX DMA streams but
+* because of the streams ordering the RX stream has always priority
+* over the TX stream.
+*/
+#if !defined(STM32_I2C_I2C1_DMA_PRIORITY) || defined(__DOXYGEN__)
+#define STM32_I2C_I2C1_DMA_PRIORITY 1
+#endif
+
+/**
+* @brief I2C2 DMA priority (0..3|lowest..highest).
+* @note The priority level is used for both the TX and RX DMA streams but
+* because of the streams ordering the RX stream has always priority
+* over the TX stream.
+*/
+#if !defined(STM32_I2C_I2C2_DMA_PRIORITY) || defined(__DOXYGEN__)
+#define STM32_I2C_I2C2_DMA_PRIORITY 1
+#endif
+
+/**
+* @brief I2C3 DMA priority (0..3|lowest..highest).
+* @note The priority level is used for both the TX and RX DMA streams but
+* because of the streams ordering the RX stream has always priority
+* over the TX stream.
+*/
+#if !defined(STM32_I2C_I2C3_DMA_PRIORITY) || defined(__DOXYGEN__)
+#define STM32_I2C_I2C3_DMA_PRIORITY 1
+#endif
+
+/**
+ * @brief I2C DMA error hook.
+ * @note The default action for DMA errors is a system halt because DMA
+ * error can only happen because programming errors.
+ */
+#if !defined(STM32_I2C_DMA_ERROR_HOOK) || defined(__DOXYGEN__)
+#define STM32_I2C_DMA_ERROR_HOOK(i2cp) chSysHalt()
+#endif
+
+#if STM32_ADVANCED_DMA || defined(__DOXYGEN__)
+
+/**
+ * @brief DMA stream used for I2C1 RX operations.
+ * @note This option is only available on platforms with enhanced DMA.
+ */
+#if !defined(STM32_I2C_I2C1_RX_DMA_STREAM) || defined(__DOXYGEN__)
+#define STM32_I2C_I2C1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0)
+#endif
+
+/**
+ * @brief DMA stream used for I2C1 TX operations.
+ * @note This option is only available on platforms with enhanced DMA.
+ */
+#if !defined(STM32_I2C_I2C1_TX_DMA_STREAM) || defined(__DOXYGEN__)
+#define STM32_I2C_I2C1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6)
+#endif
+
+/**
+ * @brief DMA stream used for I2C2 RX operations.
+ * @note This option is only available on platforms with enhanced DMA.
+ */
+#if !defined(STM32_I2C_I2C2_RX_DMA_STREAM) || defined(__DOXYGEN__)
+#define STM32_I2C_I2C2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2)
+#endif
+
+/**
+ * @brief DMA stream used for I2C2 TX operations.
+ * @note This option is only available on platforms with enhanced DMA.
+ */
+#if !defined(STM32_I2C_I2C2_TX_DMA_STREAM) || defined(__DOXYGEN__)
+#define STM32_I2C_I2C2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7)
+#endif
+
+/**
+ * @brief DMA stream used for I2C3 RX operations.
+ * @note This option is only available on platforms with enhanced DMA.
+ */
+#if !defined(STM32_I2C_I2C3_RX_DMA_STREAM) || defined(__DOXYGEN__)
+#define STM32_I2C_I2C3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2)
+#endif
+
+/**
+ * @brief DMA stream used for I2C3 TX operations.
+ * @note This option is only available on platforms with enhanced DMA.
+ */
+#if !defined(STM32_I2C_I2C3_TX_DMA_STREAM) || defined(__DOXYGEN__)
+#define STM32_I2C_I2C3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4)
+#endif
+
+#else /* !STM32_ADVANCED_DMA */
+
+/* Fixed streams for platforms using the old DMA peripheral, the values are
+ valid for both STM32F1xx and STM32L1xx.*/
+#define STM32_I2C_I2C1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7)
+#define STM32_I2C_I2C1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6)
+#define STM32_I2C_I2C2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5)
+#define STM32_I2C_I2C2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4)
+
+#endif /* !STM32_ADVANCED_DMA*/
+/** @} */
+
+/*===========================================================================*/
+/* Derived constants and error checks. */
+/*===========================================================================*/
+
+/** @brief error checks */
+#if STM32_I2C_USE_I2C1 && !STM32_HAS_I2C1
+#error "I2C1 not present in the selected device"
+#endif
+
+#if STM32_I2C_USE_I2C2 && !STM32_HAS_I2C2
+#error "I2C2 not present in the selected device"
+#endif
+
+#if STM32_I2C_USE_I2C3 && !STM32_HAS_I2C3
+#error "I2C3 not present in the selected device"
+#endif
+
+#if !STM32_I2C_USE_I2C1 && !STM32_I2C_USE_I2C2 && \
+ !STM32_I2C_USE_I2C3
+#error "I2C driver activated but no I2C peripheral assigned"
+#endif
+
+#if STM32_I2C_USE_I2C1 && \
+ !STM32_DMA_IS_VALID_ID(STM32_I2C_I2C1_RX_DMA_STREAM, \
+ STM32_I2C1_RX_DMA_MSK)
+#error "invalid DMA stream associated to I2C1 RX"
+#endif
+
+#if STM32_I2C_USE_I2C1 && \
+ !STM32_DMA_IS_VALID_ID(STM32_I2C_I2C1_TX_DMA_STREAM, \
+ STM32_I2C1_TX_DMA_MSK)
+#error "invalid DMA stream associated to I2C1 TX"
+#endif
+
+#if STM32_I2C_USE_I2C2 && \
+ !STM32_DMA_IS_VALID_ID(STM32_I2C_I2C2_RX_DMA_STREAM, \
+ STM32_I2C2_RX_DMA_MSK)
+#error "invalid DMA stream associated to I2C2 RX"
+#endif
+
+#if STM32_I2C_USE_I2C2 && \
+ !STM32_DMA_IS_VALID_ID(STM32_I2C_I2C2_TX_DMA_STREAM, \
+ STM32_I2C2_TX_DMA_MSK)
+#error "invalid DMA stream associated to I2C2 TX"
+#endif
+
+#if STM32_I2C_USE_I2C3 && \
+ !STM32_DMA_IS_VALID_ID(STM32_I2C_I2C3_RX_DMA_STREAM, \
+ STM32_I2C3_RX_DMA_MSK)
+#error "invalid DMA stream associated to I2C3 RX"
+#endif
+
+#if STM32_I2C_USE_I2C3 && \
+ !STM32_DMA_IS_VALID_ID(STM32_I2C_I2C3_TX_DMA_STREAM, \
+ STM32_I2C3_TX_DMA_MSK)
+#error "invalid DMA stream associated to I2C3 TX"
+#endif
+
+#if !defined(STM32_DMA_REQUIRED)
+#define STM32_DMA_REQUIRED
+#endif
+
+/* Check clock range. */
+#if defined(STM32F4XX)
+#if !(I2C_CLK_FREQ >= 2) && (I2C_CLK_FREQ <= 42)
+#error "I2C peripheral clock frequency out of range."
+#endif
+
+#elif defined(STM32L1XX_MD)
+#if !(I2C_CLK_FREQ >= 2) && (I2C_CLK_FREQ <= 32)
+#error "I2C peripheral clock frequency out of range."
+#endif
+
+#elif defined(STM32F2XX)
+#if !(I2C_CLK_FREQ >= 2) && (I2C_CLK_FREQ <= 30)
+#error "I2C peripheral clock frequency out of range."
+#endif
+
+#elif defined(STM32F10X_LD_VL) || defined(STM32F10X_MD_VL) || \
+ defined(STM32F10X_HD_VL)
+#if !(I2C_CLK_FREQ >= 2) && (I2C_CLK_FREQ <= 24)
+#error "I2C peripheral clock frequency out of range."
+#endif
+
+#elif defined(STM32F10X_LD) || defined(STM32F10X_MD) || \
+ defined(STM32F10X_HD) || defined(STM32F10X_XL) || \
+ defined(STM32F10X_CL)
+#if !(I2C_CLK_FREQ >= 2) && (I2C_CLK_FREQ <= 36)
+#error "I2C peripheral clock frequency out of range."
+#endif
+#else
+#error "unspecified, unsupported or invalid STM32 platform"
+#endif
+
+/*===========================================================================*/
+/* Driver data structures and types. */
+/*===========================================================================*/
+
+/**
+ * @brief Type representing I2C address.
+ */
+typedef uint16_t i2caddr_t;
+
+/**
+ * @brief I2C Driver condition flags type.
+ */
+typedef uint32_t i2cflags_t;
+
+/**
+ * @brief Supported modes for the I2C bus.
+ */
+typedef enum {
+ OPMODE_I2C = 1,
+ OPMODE_SMBUS_DEVICE = 2,
+ OPMODE_SMBUS_HOST = 3,
+} i2copmode_t;
+
+/**
+ * @brief Supported duty cycle modes for the I2C bus.
+ */
+typedef enum {
+ STD_DUTY_CYCLE = 1,
+ FAST_DUTY_CYCLE_2 = 2,
+ FAST_DUTY_CYCLE_16_9 = 3,
+} i2cdutycycle_t;
+
+/**
+ * @brief Driver configuration structure.
+ */
+typedef struct {
+ i2copmode_t op_mode; /**< @brief Specifies the I2C mode. */
+ uint32_t clock_speed; /**< @brief Specifies the clock frequency.
+ @note Must be set to a value lower
+ than 400kHz. */
+ i2cdutycycle_t duty_cycle; /**< @brief Specifies the I2C fast mode
+ duty cycle. */
+} I2CConfig;
+
+/**
+ * @brief Type of a structure representing an I2C driver.
+ */
+typedef struct I2CDriver I2CDriver;
+
+/**
+ * @brief Structure representing an I2C driver.
+ */
+struct I2CDriver{
+ /**
+ * @brief Driver state.
+ */
+ i2cstate_t state;
+ /**
+ * @brief Current configuration data.
+ */
+ const I2CConfig *config;
+ /**
+ * @brief Error flags.
+ */
+ i2cflags_t errors;
+#if I2C_USE_MUTUAL_EXCLUSION || defined(__DOXYGEN__)
+#if CH_USE_MUTEXES || defined(__DOXYGEN__)
+ /**
+ * @brief Mutex protecting the bus.
+ */
+ Mutex mutex;
+#elif CH_USE_SEMAPHORES
+ Semaphore semaphore;
+#endif
+#endif /* I2C_USE_MUTUAL_EXCLUSION */
+#if defined(I2C_DRIVER_EXT_FIELDS)
+ I2C_DRIVER_EXT_FIELDS
+#endif
+ /* End of the mandatory fields.*/
+ /**
+ * @brief Thread waiting for I/O completion.
+ */
+ Thread *thread;
+ /**
+ * @brief Current slave address without R/W bit.
+ */
+ i2caddr_t addr;
+ /**
+ * @brief DMA mode bit mask.
+ */
+ uint32_t dmamode;
+ /**
+ * @brief Receive DMA channel.
+ */
+ const stm32_dma_stream_t *dmarx;
+ /**
+ * @brief Transmit DMA channel.
+ */
+ const stm32_dma_stream_t *dmatx;
+ /**
+ * @brief Pointer to the I2Cx registers block.
+ */
+ I2C_TypeDef *i2c;
+};
+
+/*===========================================================================*/
+/* Driver macros. */
+/*===========================================================================*/
+
+/**
+ * @brief Get errors from I2C driver.
+ *
+ * @param[in] i2cp pointer to the @p I2CDriver object
+ *
+ * @notapi
+ */
+#define i2c_lld_get_errors(i2cp) ((i2cp)->errors)
+
+/*===========================================================================*/
+/* External declarations. */
+/*===========================================================================*/
+
+#if !defined(__DOXYGEN__)
+#if STM32_I2C_USE_I2C1
+extern I2CDriver I2CD1;
+#endif
+
+#if STM32_I2C_USE_I2C2
+extern I2CDriver I2CD2;
+#endif
+
+#if STM32_I2C_USE_I2C3
+extern I2CDriver I2CD3;
+#endif
+#endif /* !defined(__DOXYGEN__) */
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+ void i2c_lld_init(void);
+ void i2c_lld_start(I2CDriver *i2cp);
+ void i2c_lld_stop(I2CDriver *i2cp);
+ msg_t i2c_lld_master_transmit_timeout(I2CDriver *i2cp, i2caddr_t addr,
+ const uint8_t *txbuf, size_t txbytes,
+ uint8_t *rxbuf, size_t rxbytes,
+ systime_t timeout);
+ msg_t i2c_lld_master_receive_timeout(I2CDriver *i2cp, i2caddr_t addr,
+ uint8_t *rxbuf, size_t rxbytes,
+ systime_t timeout);
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* HAL_USE_I2C */
+
+#endif /* _I2C_LLD_H_ */
+
+/** @} */
|