diff options
Diffstat (limited to 'os/hal/platforms/STM32/GPIOv1')
-rw-r--r-- | os/hal/platforms/STM32/GPIOv1/pal_lld.c | 186 | ||||
-rw-r--r-- | os/hal/platforms/STM32/GPIOv1/pal_lld.h | 344 |
2 files changed, 530 insertions, 0 deletions
diff --git a/os/hal/platforms/STM32/GPIOv1/pal_lld.c b/os/hal/platforms/STM32/GPIOv1/pal_lld.c new file mode 100644 index 000000000..a0a1fb6e5 --- /dev/null +++ b/os/hal/platforms/STM32/GPIOv1/pal_lld.c @@ -0,0 +1,186 @@ +/*
+ ChibiOS/RT - Copyright (C) 2006,2007,2008,2009,2010,
+ 2011 Giovanni Di Sirio.
+
+ This file is part of ChibiOS/RT.
+
+ ChibiOS/RT is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 3 of the License, or
+ (at your option) any later version.
+
+ ChibiOS/RT is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+/**
+ * @file STM32/pal_lld.c
+ * @brief STM32 GPIO low level driver code.
+ *
+ * @addtogroup PAL
+ * @{
+ */
+
+#include "ch.h"
+#include "hal.h"
+
+#if HAL_USE_PAL || defined(__DOXYGEN__)
+
+#if STM32_HAS_GPIOG
+#define APB2_EN_MASK (RCC_APB2ENR_IOPAEN | RCC_APB2ENR_IOPBEN | \
+ RCC_APB2ENR_IOPCEN | RCC_APB2ENR_IOPDEN | \
+ RCC_APB2ENR_IOPEEN | RCC_APB2ENR_IOPFEN | \
+ RCC_APB2ENR_IOPGEN | RCC_APB2ENR_AFIOEN)
+#elif STM32_HAS_GPIOE
+#define APB2_EN_MASK (RCC_APB2ENR_IOPAEN | RCC_APB2ENR_IOPBEN | \
+ RCC_APB2ENR_IOPCEN | RCC_APB2ENR_IOPDEN | \
+ RCC_APB2ENR_IOPEEN | RCC_APB2ENR_AFIOEN)
+#else
+#define APB2_EN_MASK (RCC_APB2ENR_IOPAEN | RCC_APB2ENR_IOPBEN | \
+ RCC_APB2ENR_IOPCEN | RCC_APB2ENR_IOPDEN | \
+ RCC_APB2ENR_AFIOEN)
+#endif
+
+/*===========================================================================*/
+/* Driver exported variables. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver local variables. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver local functions. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver interrupt handlers. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver exported functions. */
+/*===========================================================================*/
+
+/**
+ * @brief STM32 I/O ports configuration.
+ * @details Ports A-D(E, F, G) clocks enabled, AFIO clock enabled.
+ *
+ * @param[in] config the STM32 ports configuration
+ *
+ * @notapi
+ */
+void _pal_lld_init(const PALConfig *config) {
+
+ /*
+ * Enables the GPIO related clocks.
+ */
+ RCC->APB2ENR |= APB2_EN_MASK;
+
+ /*
+ * Initial GPIO setup.
+ */
+ GPIOA->ODR = config->PAData.odr;
+ GPIOA->CRH = config->PAData.crh;
+ GPIOA->CRL = config->PAData.crl;
+ GPIOB->ODR = config->PBData.odr;
+ GPIOB->CRH = config->PBData.crh;
+ GPIOB->CRL = config->PBData.crl;
+ GPIOC->ODR = config->PCData.odr;
+ GPIOC->CRH = config->PCData.crh;
+ GPIOC->CRL = config->PCData.crl;
+ GPIOD->ODR = config->PDData.odr;
+ GPIOD->CRH = config->PDData.crh;
+ GPIOD->CRL = config->PDData.crl;
+#if STM32_HAS_GPIOE || defined(__DOXYGEN__)
+ GPIOE->ODR = config->PEData.odr;
+ GPIOE->CRH = config->PEData.crh;
+ GPIOE->CRL = config->PEData.crl;
+#if STM32_HAS_GPIOF || defined(__DOXYGEN__)
+ GPIOF->ODR = config->PFData.odr;
+ GPIOF->CRH = config->PFData.crh;
+ GPIOF->CRL = config->PFData.crl;
+#if STM32_HAS_GPIOG || defined(__DOXYGEN__)
+ GPIOG->ODR = config->PGData.odr;
+ GPIOG->CRH = config->PGData.crh;
+ GPIOG->CRL = config->PGData.crl;
+#endif
+#endif
+#endif
+}
+
+/**
+ * @brief Pads mode setup.
+ * @details This function programs a pads group belonging to the same port
+ * with the specified mode.
+ * @note This function is not meant to be invoked directly by the
+ * application code.
+ * @note @p PAL_MODE_UNCONNECTED is implemented as push pull output at 2MHz.
+ * @note Writing on pads programmed as pull-up or pull-down has the side
+ * effect to modify the resistor setting because the output latched
+ * data is used for the resistor selection.
+ *
+ * @param[in] port the port identifier
+ * @param[in] mask the group mask
+ * @param[in] mode the mode
+ *
+ * @notapi
+ */
+void _pal_lld_setgroupmode(ioportid_t port,
+ ioportmask_t mask,
+ iomode_t mode) {
+ static const uint8_t cfgtab[] = {
+ 4, /* PAL_MODE_RESET, implemented as input.*/
+ 2, /* PAL_MODE_UNCONNECTED, implemented as push pull output 2MHz.*/
+ 4, /* PAL_MODE_INPUT */
+ 8, /* PAL_MODE_INPUT_PULLUP */
+ 8, /* PAL_MODE_INPUT_PULLDOWN */
+ 0, /* PAL_MODE_INPUT_ANALOG */
+ 3, /* PAL_MODE_OUTPUT_PUSHPULL, 50MHz.*/
+ 7, /* PAL_MODE_OUTPUT_OPENDRAIN, 50MHz.*/
+ 8, /* Reserved.*/
+ 8, /* Reserved.*/
+ 8, /* Reserved.*/
+ 8, /* Reserved.*/
+ 8, /* Reserved.*/
+ 8, /* Reserved.*/
+ 8, /* Reserved.*/
+ 8, /* Reserved.*/
+ 0xB, /* PAL_MODE_STM32_ALTERNATE_PUSHPULL, 50MHz.*/
+ 0xF, /* PAL_MODE_STM32_ALTERNATE_OPENDRAIN, 50MHz.*/
+ };
+ uint32_t mh, ml, crh, crl, cfg;
+ unsigned i;
+
+ if (mode == PAL_MODE_INPUT_PULLUP)
+ port->BSRR = mask;
+ else if (mode == PAL_MODE_INPUT_PULLDOWN)
+ port->BRR = mask;
+ cfg = cfgtab[mode];
+ mh = ml = crh = crl = 0;
+ for (i = 0; i < 8; i++) {
+ ml <<= 4;
+ mh <<= 4;
+ crl <<= 4;
+ crh <<= 4;
+ if ((mask & 0x0080) == 0)
+ ml |= 0xf;
+ else
+ crl |= cfg;
+ if ((mask & 0x8000) == 0)
+ mh |= 0xf;
+ else
+ crh |= cfg;
+ mask <<= 1;
+ }
+ port->CRH = (port->CRH & mh) | crh;
+ port->CRL = (port->CRL & ml) | crl;
+}
+
+#endif /* HAL_USE_PAL */
+
+/** @} */
diff --git a/os/hal/platforms/STM32/GPIOv1/pal_lld.h b/os/hal/platforms/STM32/GPIOv1/pal_lld.h new file mode 100644 index 000000000..fe2102637 --- /dev/null +++ b/os/hal/platforms/STM32/GPIOv1/pal_lld.h @@ -0,0 +1,344 @@ +/*
+ ChibiOS/RT - Copyright (C) 2006,2007,2008,2009,2010,
+ 2011 Giovanni Di Sirio.
+
+ This file is part of ChibiOS/RT.
+
+ ChibiOS/RT is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 3 of the License, or
+ (at your option) any later version.
+
+ ChibiOS/RT is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+/**
+ * @file STM32/pal_lld.h
+ * @brief STM32 GPIO low level driver header.
+ *
+ * @addtogroup PAL
+ * @{
+ */
+
+#ifndef _PAL_LLD_H_
+#define _PAL_LLD_H_
+
+#if HAL_USE_PAL || defined(__DOXYGEN__)
+
+/*===========================================================================*/
+/* Unsupported modes and specific modes */
+/*===========================================================================*/
+
+/**
+ * @brief STM32 specific alternate push-pull output mode.
+ */
+#define PAL_MODE_STM32_ALTERNATE_PUSHPULL 16
+
+/**
+ * @brief STM32 specific alternate open-drain output mode.
+ */
+#define PAL_MODE_STM32_ALTERNATE_OPENDRAIN 17
+
+/*===========================================================================*/
+/* I/O Ports Types and constants. */
+/*===========================================================================*/
+
+/**
+ * @brief GPIO port setup info.
+ */
+typedef struct {
+ /** Initial value for ODR register.*/
+ uint32_t odr;
+ /** Initial value for CRL register.*/
+ uint32_t crl;
+ /** Initial value for CRH register.*/
+ uint32_t crh;
+} stm32_gpio_setup_t;
+
+/**
+ * @brief STM32 GPIO static initializer.
+ * @details An instance of this structure must be passed to @p palInit() at
+ * system startup time in order to initialize the digital I/O
+ * subsystem. This represents only the initial setup, specific pads
+ * or whole ports can be reprogrammed at later time.
+ */
+typedef struct {
+ /** @brief Port A setup data.*/
+ stm32_gpio_setup_t PAData;
+ /** @brief Port B setup data.*/
+ stm32_gpio_setup_t PBData;
+ /** @brief Port C setup data.*/
+ stm32_gpio_setup_t PCData;
+ /** @brief Port D setup data.*/
+ stm32_gpio_setup_t PDData;
+#if STM32_HAS_GPIOE || defined(__DOXYGEN__)
+ /** @brief Port E setup data.*/
+ stm32_gpio_setup_t PEData;
+#if STM32_HAS_GPIOF || defined(__DOXYGEN__)
+ /** @brief Port F setup data.*/
+ stm32_gpio_setup_t PFData;
+#if STM32_HAS_GPIOG || defined(__DOXYGEN__)
+ /** @brief Port G setup data.*/
+ stm32_gpio_setup_t PGData;
+#endif
+#endif
+#endif
+} PALConfig;
+
+/**
+ * @brief Width, in bits, of an I/O port.
+ */
+#define PAL_IOPORTS_WIDTH 16
+
+/**
+ * @brief Whole port mask.
+ * @details This macro specifies all the valid bits into a port.
+ */
+#define PAL_WHOLE_PORT ((ioportmask_t)0xFFFF)
+
+/**
+ * @brief Digital I/O port sized unsigned type.
+ */
+typedef uint32_t ioportmask_t;
+
+/**
+ * @brief Digital I/O modes.
+ */
+typedef uint32_t iomode_t;
+
+/**
+ * @brief Port Identifier.
+ * @details This type can be a scalar or some kind of pointer, do not make
+ * any assumption about it, use the provided macros when populating
+ * variables of this type.
+ */
+typedef GPIO_TypeDef * ioportid_t;
+
+/*===========================================================================*/
+/* I/O Ports Identifiers. */
+/* The low level driver wraps the definitions already present in the STM32 */
+/* firmware library. */
+/*===========================================================================*/
+
+/**
+ * @brief GPIO port A identifier.
+ */
+#if STM32_HAS_GPIOA || defined(__DOXYGEN__)
+#define IOPORT1 GPIOA
+#endif
+
+/**
+ * @brief GPIO port B identifier.
+ */
+#if STM32_HAS_GPIOB || defined(__DOXYGEN__)
+#define IOPORT2 GPIOB
+#endif
+
+/**
+ * @brief GPIO port C identifier.
+ */
+#if STM32_HAS_GPIOC || defined(__DOXYGEN__)
+#define IOPORT3 GPIOC
+#endif
+
+/**
+ * @brief GPIO port D identifier.
+ */
+#if STM32_HAS_GPIOD || defined(__DOXYGEN__)
+#define IOPORT4 GPIOD
+#endif
+
+/**
+ * @brief GPIO port E identifier.
+ */
+#if STM32_HAS_GPIOE || defined(__DOXYGEN__)
+#define IOPORT5 GPIOE
+#endif
+
+/**
+ * @brief GPIO port F identifier.
+ */
+#if STM32_HAS_GPIOF || defined(__DOXYGEN__)
+#define IOPORT6 GPIOF
+#endif
+
+/**
+ * @brief GPIO port G identifier.
+ */
+#if STM32_HAS_GPIOG || defined(__DOXYGEN__)
+#define IOPORT7 GPIOG
+#endif
+
+/*===========================================================================*/
+/* Implementation, some of the following macros could be implemented as */
+/* functions, please put them in a file named ioports_lld.c if so. */
+/*===========================================================================*/
+
+/**
+ * @brief GPIO ports subsystem initialization.
+ *
+ * @notapi
+ */
+#define pal_lld_init(config) _pal_lld_init(config)
+
+/**
+ * @brief Reads an I/O port.
+ * @details This function is implemented by reading the GPIO IDR register, the
+ * implementation has no side effects.
+ * @note This function is not meant to be invoked directly by the application
+ * code.
+ *
+ * @param[in] port the port identifier
+ * @return The port bits.
+ *
+ * @notapi
+ */
+#define pal_lld_readport(port) ((port)->IDR)
+
+/**
+ * @brief Reads the output latch.
+ * @details This function is implemented by reading the GPIO ODR register, the
+ * implementation has no side effects.
+ * @note This function is not meant to be invoked directly by the application
+ * code.
+ *
+ * @param[in] port the port identifier
+ * @return The latched logical states.
+ *
+ * @notapi
+ */
+#define pal_lld_readlatch(port) ((port)->ODR)
+
+/**
+ * @brief Writes on a I/O port.
+ * @details This function is implemented by writing the GPIO ODR register, the
+ * implementation has no side effects.
+ * @note This function is not meant to be invoked directly by the
+ * application code.
+ * @note Writing on pads programmed as pull-up or pull-down has the side
+ * effect to modify the resistor setting because the output latched
+ * data is used for the resistor selection.
+ *
+ * @param[in] port the port identifier
+ * @param[in] bits the bits to be written on the specified port
+ *
+ * @notapi
+ */
+#define pal_lld_writeport(port, bits) ((port)->ODR = (bits))
+
+/**
+ * @brief Sets a bits mask on a I/O port.
+ * @details This function is implemented by writing the GPIO BSRR register, the
+ * implementation has no side effects.
+ * @note This function is not meant to be invoked directly by the
+ * application code.
+ * @note Writing on pads programmed as pull-up or pull-down has the side
+ * effect to modify the resistor setting because the output latched
+ * data is used for the resistor selection.
+ *
+ * @param[in] port the port identifier
+ * @param[in] bits the bits to be ORed on the specified port
+ *
+ * @notapi
+ */
+#define pal_lld_setport(port, bits) ((port)->BSRR = (bits))
+
+/**
+ * @brief Clears a bits mask on a I/O port.
+ * @details This function is implemented by writing the GPIO BRR register, the
+ * implementation has no side effects.
+ * @note This function is not meant to be invoked directly by the
+ * application code.
+ * @note Writing on pads programmed as pull-up or pull-down has the side
+ * effect to modify the resistor setting because the output latched
+ * data is used for the resistor selection.
+ *
+ * @param[in] port the port identifier
+ * @param[in] bits the bits to be cleared on the specified port
+ *
+ * @notapi
+ */
+#define pal_lld_clearport(port, bits) ((port)->BRR = (bits))
+
+/**
+ * @brief Writes a group of bits.
+ * @details This function is implemented by writing the GPIO BSRR register, the
+ * implementation has no side effects.
+ * @note This function is not meant to be invoked directly by the
+ * application code.
+ * @note Writing on pads programmed as pull-up or pull-down has the side
+ * effect to modify the resistor setting because the output latched
+ * data is used for the resistor selection.
+ *
+ * @param[in] port the port identifier
+ * @param[in] mask the group mask
+ * @param[in] offset the group bit offset within the port
+ * @param[in] bits the bits to be written. Values exceeding the group
+ * width are masked.
+ *
+ * @notapi
+ */
+#define pal_lld_writegroup(port, mask, offset, bits) \
+ ((port)->BSRR = ((~(bits) & (mask)) << (16 + (offset))) | \
+ (((bits) & (mask)) << (offset)))
+
+/**
+ * @brief Pads group mode setup.
+ * @details This function programs a pads group belonging to the same port
+ * with the specified mode.
+ * @note This function is not meant to be invoked directly by the
+ * application code.
+ * @note Writing on pads programmed as pull-up or pull-down has the side
+ * effect to modify the resistor setting because the output latched
+ * data is used for the resistor selection.
+ *
+ * @param[in] port the port identifier
+ * @param[in] mask the group mask
+ * @param[in] mode the mode
+ *
+ * @notapi
+ */
+#define pal_lld_setgroupmode(port, mask, mode) \
+ _pal_lld_setgroupmode(port, mask, mode)
+
+/**
+ * @brief Writes a logical state on an output pad.
+ * @note This function is not meant to be invoked directly by the
+ * application code.
+ * @note Writing on pads programmed as pull-up or pull-down has the side
+ * effect to modify the resistor setting because the output latched
+ * data is used for the resistor selection.
+ *
+ * @param[in] port the port identifier
+ * @param[in] pad the pad number within the port
+ * @param[in] bit logical value, the value must be @p PAL_LOW or
+ * @p PAL_HIGH
+ *
+ * @notapi
+ */
+#define pal_lld_writepad(port, pad, bit) pal_lld_writegroup(port, 1, pad, bit)
+
+extern const PALConfig pal_default_config;
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+ void _pal_lld_init(const PALConfig *config);
+ void _pal_lld_setgroupmode(ioportid_t port,
+ ioportmask_t mask,
+ iomode_t mode);
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* HAL_USE_PAL */
+
+#endif /* _PAL_LLD_H_ */
+
+/** @} */
|