diff options
Diffstat (limited to 'os/hal/platforms/SPC560Dxx/hal_lld.h')
-rw-r--r-- | os/hal/platforms/SPC560Dxx/hal_lld.h | 779 |
1 files changed, 779 insertions, 0 deletions
diff --git a/os/hal/platforms/SPC560Dxx/hal_lld.h b/os/hal/platforms/SPC560Dxx/hal_lld.h new file mode 100644 index 000000000..ddf44dff3 --- /dev/null +++ b/os/hal/platforms/SPC560Dxx/hal_lld.h @@ -0,0 +1,779 @@ +/*
+ SPC5 HAL - Copyright (C) 2013 STMicroelectronics
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+/**
+ * @file SPC560BCxx/hal_lld.h
+ * @brief SPC560B/Cxx HAL subsystem low level driver header.
+ * @pre This module requires the following macros to be defined in the
+ * @p board.h file:
+ * - SPC5_XOSC_CLK.
+ * - SPC5_OSC_BYPASS (optionally).
+ * .
+ *
+ * @addtogroup HAL
+ * @{
+ */
+
+#ifndef _HAL_LLD_H_
+#define _HAL_LLD_H_
+
+#include "xpc560bc.h"
+#include "spc560bc_registry.h"
+
+/*===========================================================================*/
+/* Driver constants. */
+/*===========================================================================*/
+
+/**
+ * @brief Defines the support for realtime counters in the HAL.
+ */
+#define HAL_IMPLEMENTS_COUNTERS FALSE
+
+/**
+ * @name Platform identification
+ * @{
+ */
+#define PLATFORM_NAME "SPC560B/Cxx Car Body and Convenience"
+/** @} */
+
+/**
+ * @name Absolute Maximum Ratings
+ * @{
+ */
+/**
+ * @brief Maximum XOSC clock frequency.
+ */
+#define SPC5_XOSC_CLK_MAX 16000000
+
+/**
+ * @brief Minimum XOSC clock frequency.
+ */
+#define SPC5_XOSC_CLK_MIN 4000000
+
+/**
+ * @brief Maximum SXOSC clock frequency.
+ */
+#define SPC5_SXOSC_CLK_MAX 40000
+
+/**
+ * @brief Minimum SXOSC clock frequency.
+ */
+#define SPC5_SXOSC_CLK_MIN 32000
+
+/**
+ * @brief Maximum FMPLLs input clock frequency.
+ */
+#define SPC5_FMPLLIN_MIN 4000000
+
+/**
+ * @brief Maximum FMPLLs input clock frequency.
+ */
+#define SPC5_FMPLLIN_MAX 64000000
+
+/**
+ * @brief Maximum FMPLLs VCO clock frequency.
+ */
+#define SPC5_FMPLLVCO_MAX 512000000
+
+/**
+ * @brief Maximum FMPLLs VCO clock frequency.
+ */
+#define SPC5_FMPLLVCO_MIN 256000000
+
+/**
+ * @brief Maximum FMPLL0 output clock frequency.
+ */
+#define SPC5_FMPLL0_CLK_MAX 64000000
+/** @} */
+
+/**
+ * @name Internal clock sources
+ * @{
+ */
+#define SPC5_IRC_CLK 16000000 /**< Internal fast RC
+ oscillator. */
+#define SPC5_SIRC_CLK 128000 /**< Internal RC slow
+ oscillator. */
+/** @} */
+
+/**
+ * @name FMPLL_CR register bits definitions
+ * @{
+ */
+#define SPC5_FMPLL_ODF_DIV2 (0U << 24)
+#define SPC5_FMPLL_ODF_DIV4 (1U << 24)
+#define SPC5_FMPLL_ODF_DIV8 (2U << 24)
+#define SPC5_FMPLL_ODF_DIV16 (3U << 24)
+/** @} */
+
+/**
+ * @name ME_GS register bits definitions
+ * @{
+ */
+#define SPC5_ME_GS_SYSCLK_MASK (15U << 0)
+#define SPC5_ME_GS_SYSCLK_IRC (0U << 0)
+#define SPC5_ME_GS_SYSCLK_DIVIRC (1U << 0)
+#define SPC5_ME_GS_SYSCLK_XOSC (2U << 0)
+#define SPC5_ME_GS_SYSCLK_DIVXOSC (3U << 0)
+#define SPC5_ME_GS_SYSCLK_FMPLL0 (4U << 0)
+/** @} */
+
+/**
+ * @name ME_ME register bits definitions
+ * @{
+ */
+#define SPC5_ME_ME_RESET (1U << 0)
+#define SPC5_ME_ME_TEST (1U << 1)
+#define SPC5_ME_ME_SAFE (1U << 2)
+#define SPC5_ME_ME_DRUN (1U << 3)
+#define SPC5_ME_ME_RUN0 (1U << 4)
+#define SPC5_ME_ME_RUN1 (1U << 5)
+#define SPC5_ME_ME_RUN2 (1U << 6)
+#define SPC5_ME_ME_RUN3 (1U << 7)
+#define SPC5_ME_ME_HALT0 (1U << 8)
+#define SPC5_ME_ME_STOP0 (1U << 10)
+#define SPC5_ME_ME_STANDBY0 (1U << 13)
+/** @} */
+
+/**
+ * @name ME_xxx_MC registers bits definitions
+ * @{
+ */
+#define SPC5_ME_MC_SYSCLK_MASK (15U << 0)
+#define SPC5_ME_MC_SYSCLK(n) ((n) << 0)
+#define SPC5_ME_MC_SYSCLK_IRC SPC5_ME_MC_SYSCLK(0)
+#define SPC5_ME_MC_SYSCLK_DIVIRC SPC5_ME_MC_SYSCLK(1)
+#define SPC5_ME_MC_SYSCLK_XOSC SPC5_ME_MC_SYSCLK(2)
+#define SPC5_ME_MC_SYSCLK_DIVXOSC SPC5_ME_MC_SYSCLK(3)
+#define SPC5_ME_MC_SYSCLK_FMPLL0 SPC5_ME_MC_SYSCLK(4)
+#define SPC5_ME_MC_SYSCLK_DISABLED SPC5_ME_MC_SYSCLK(15)
+#define SPC5_ME_MC_IRCON (1U << 4)
+#define SPC5_ME_MC_XOSC0ON (1U << 5)
+#define SPC5_ME_MC_PLL0ON (1U << 6)
+#define SPC5_ME_MC_CFLAON_MASK (3U << 16)
+#define SPC5_ME_MC_CFLAON(n) ((n) << 16)
+#define SPC5_ME_MC_CFLAON_PD (1U << 16)
+#define SPC5_ME_MC_CFLAON_LP (2U << 16)
+#define SPC5_ME_MC_CFLAON_NORMAL (3U << 16)
+#define SPC5_ME_MC_DFLAON_MASK (3U << 18)
+#define SPC5_ME_MC_DFLAON(n) ((n) << 18)
+#define SPC5_ME_MC_DFLAON_PD (1U << 18)
+#define SPC5_ME_MC_DFLAON_LP (2U << 18)
+#define SPC5_ME_MC_DFLAON_NORMAL (3U << 18)
+#define SPC5_ME_MC_MVRON (1U << 20)
+#define SPC5_ME_MC_PDO (1U << 23)
+/** @} */
+
+/**
+ * @name ME_MCTL register bits definitions
+ * @{
+ */
+#define SPC5_ME_MCTL_KEY 0x5AF0U
+#define SPC5_ME_MCTL_KEY_INV 0xA50FU
+#define SPC5_ME_MCTL_MODE_MASK (15U << 28)
+#define SPC5_ME_MCTL_MODE(n) ((n) << 28)
+/** @} */
+
+/**
+ * @name ME_RUN_PCx registers bits definitions
+ * @{
+ */
+#define SPC5_ME_RUN_PC_TEST (1U << 1)
+#define SPC5_ME_RUN_PC_SAFE (1U << 2)
+#define SPC5_ME_RUN_PC_DRUN (1U << 3)
+#define SPC5_ME_RUN_PC_RUN0 (1U << 4)
+#define SPC5_ME_RUN_PC_RUN1 (1U << 5)
+#define SPC5_ME_RUN_PC_RUN2 (1U << 6)
+#define SPC5_ME_RUN_PC_RUN3 (1U << 7)
+/** @} */
+
+/**
+ * @name ME_LP_PCx registers bits definitions
+ * @{
+ */
+#define SPC5_ME_LP_PC_HALT0 (1U << 8)
+#define SPC5_ME_LP_PC_STOP0 (1U << 10)
+#define SPC5_ME_LP_PC_STANDBY0 (1U << 10)
+/** @} */
+
+/**
+ * @name ME_PCTL registers bits definitions
+ * @{
+ */
+#define SPC5_ME_PCTL_RUN_MASK (7U << 0)
+#define SPC5_ME_PCTL_RUN(n) ((n) << 0)
+#define SPC5_ME_PCTL_LP_MASK (7U << 3)
+#define SPC5_ME_PCTL_LP(n) ((n) << 3)
+#define SPC5_ME_PCTL_DBG (1U << 6)
+/** @} */
+
+/*===========================================================================*/
+/* Driver pre-compile time settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Disables the clocks initialization in the HAL.
+ */
+#if !defined(SPC5_NO_INIT) || defined(__DOXYGEN__)
+#define SPC5_NO_INIT FALSE
+#endif
+
+/**
+ * @brief Disables the overclock checks.
+ */
+#if !defined(SPC5_ALLOW_OVERCLOCK) || defined(__DOXYGEN__)
+#define SPC5_ALLOW_OVERCLOCK FALSE
+#endif
+
+/**
+ * @brief Disables the watchdog on start.
+ */
+#if !defined(SPC5_DISABLE_WATCHDOG) || defined(__DOXYGEN__)
+#define SPC5_DISABLE_WATCHDOG TRUE
+#endif
+
+/**
+ * @brief FMPLL0 IDF divider value.
+ * @note The default value is calculated for XOSC=8MHz and PHI=64MHz.
+ */
+#if !defined(SPC5_FMPLL0_IDF_VALUE) || defined(__DOXYGEN__)
+#define SPC5_FMPLL0_IDF_VALUE 1
+#endif
+
+/**
+ * @brief FMPLL0 NDIV divider value.
+ * @note The default value is calculated for XOSC=8MHz and PHI=64MHz.
+ */
+#if !defined(SPC5_FMPLL0_NDIV_VALUE) || defined(__DOXYGEN__)
+#define SPC5_FMPLL0_NDIV_VALUE 32
+#endif
+
+/**
+ * @brief FMPLL0 ODF divider value.
+ * @note The default value is calculated for XOSC=8MHz and PHI=64MHz.
+ */
+#if !defined(SPC5_FMPLL0_ODF) || defined(__DOXYGEN__)
+#define SPC5_FMPLL0_ODF SPC5_FMPLL_ODF_DIV4
+#endif
+
+/**
+ * @brief XOSC divider value.
+ * @note The allowed range is 1...32.
+ */
+#if !defined(SPC5_XOSCDIV_VALUE) || defined(__DOXYGEN__)
+#define SPC5_XOSCDIV_VALUE 1
+#endif
+
+/**
+ * @brief Fast IRC divider value.
+ * @note The allowed range is 1...32.
+ */
+#if !defined(SPC5_IRCDIV_VALUE) || defined(__DOXYGEN__)
+#define SPC5_IRCDIV_VALUE 1
+#endif
+
+/**
+ * @brief Peripherals Set 1 clock divider value.
+ * @note Zero means disabled clock.
+ */
+#if !defined(SPC5_PERIPHERAL1_CLK_DIV_VALUE) || defined(__DOXYGEN__)
+#define SPC5_PERIPHERAL1_CLK_DIV_VALUE 2
+#endif
+
+/**
+ * @brief Peripherals Set 2 clock divider value.
+ * @note Zero means disabled clock.
+ */
+#if !defined(SPC5_PERIPHERAL2_CLK_DIV_VALUE) || defined(__DOXYGEN__)
+#define SPC5_PERIPHERAL2_CLK_DIV_VALUE 2
+#endif
+
+/**
+ * @brief Peripherals Set 3 clock divider value.
+ * @note Zero means disabled clock.
+ */
+#if !defined(SPC5_PERIPHERAL3_CLK_DIV_VALUE) || defined(__DOXYGEN__)
+#define SPC5_PERIPHERAL3_CLK_DIV_VALUE 2
+#endif
+
+/**
+ * @brief Active run modes in ME_ME register.
+ * @note Modes RESET, SAFE, DRUN, and RUN0 modes are always enabled, there
+ * is no need to specify them.
+ */
+#if !defined(SPC5_ME_ME_BITS) || defined(__DOXYGEN__)
+#define SPC5_ME_ME_BITS (SPC5_ME_ME_RUN1 | \
+ SPC5_ME_ME_RUN2 | \
+ SPC5_ME_ME_RUN3 | \
+ SPC5_ME_ME_HALT0 | \
+ SPC5_ME_ME_STOP0 | \
+ SPC5_ME_ME_STANDBY0)
+#endif
+
+/**
+ * @brief TEST mode settings.
+ */
+#if !defined(SPC5_ME_TEST_MC_BITS) || defined(__DOXYGEN__)
+#define SPC5_ME_TEST_MC_BITS (SPC5_ME_MC_SYSCLK_IRC | \
+ SPC5_ME_MC_IRCON | \
+ SPC5_ME_MC_XOSC0ON | \
+ SPC5_ME_MC_PLL0ON | \
+ SPC5_ME_MC_CFLAON_NORMAL | \
+ SPC5_ME_MC_DFLAON_NORMAL | \
+ SPC5_ME_MC_MVRON)
+#endif
+
+/**
+ * @brief SAFE mode settings.
+ */
+#if !defined(SPC5_ME_SAFE_MC_BITS) || defined(__DOXYGEN__)
+#define SPC5_ME_SAFE_MC_BITS (SPC5_ME_MC_PDO)
+#endif
+
+/**
+ * @brief DRUN mode settings.
+ */
+#if !defined(SPC5_ME_DRUN_MC_BITS) || defined(__DOXYGEN__)
+#define SPC5_ME_DRUN_MC_BITS (SPC5_ME_MC_SYSCLK_FMPLL0 | \
+ SPC5_ME_MC_IRCON | \
+ SPC5_ME_MC_XOSC0ON | \
+ SPC5_ME_MC_PLL0ON | \
+ SPC5_ME_MC_CFLAON_NORMAL | \
+ SPC5_ME_MC_DFLAON_NORMAL | \
+ SPC5_ME_MC_MVRON)
+#endif
+
+/**
+ * @brief RUN0 mode settings.
+ */
+#if !defined(SPC5_ME_RUN0_MC_BITS) || defined(__DOXYGEN__)
+#define SPC5_ME_RUN0_MC_BITS (SPC5_ME_MC_SYSCLK_FMPLL0 | \
+ SPC5_ME_MC_IRCON | \
+ SPC5_ME_MC_XOSC0ON | \
+ SPC5_ME_MC_PLL0ON | \
+ SPC5_ME_MC_CFLAON_NORMAL | \
+ SPC5_ME_MC_DFLAON_NORMAL | \
+ SPC5_ME_MC_MVRON)
+#endif
+
+/**
+ * @brief RUN1 mode settings.
+ */
+#if !defined(SPC5_ME_RUN1_MC_BITS) || defined(__DOXYGEN__)
+#define SPC5_ME_RUN1_MC_BITS (SPC5_ME_MC_SYSCLK_FMPLL0 | \
+ SPC5_ME_MC_IRCON | \
+ SPC5_ME_MC_XOSC0ON | \
+ SPC5_ME_MC_PLL0ON | \
+ SPC5_ME_MC_CFLAON_NORMAL | \
+ SPC5_ME_MC_DFLAON_NORMAL | \
+ SPC5_ME_MC_MVRON)
+#endif
+
+/**
+ * @brief RUN2 mode settings.
+ */
+#if !defined(SPC5_ME_RUN2_MC_BITS) || defined(__DOXYGEN__)
+#define SPC5_ME_RUN2_MC_BITS (SPC5_ME_MC_SYSCLK_FMPLL0 | \
+ SPC5_ME_MC_IRCON | \
+ SPC5_ME_MC_XOSC0ON | \
+ SPC5_ME_MC_PLL0ON | \
+ SPC5_ME_MC_CFLAON_NORMAL | \
+ SPC5_ME_MC_DFLAON_NORMAL | \
+ SPC5_ME_MC_MVRON)
+#endif
+
+/**
+ * @brief RUN3 mode settings.
+ */
+#if !defined(SPC5_ME_RUN3_MC_BITS) || defined(__DOXYGEN__)
+#define SPC5_ME_RUN3_MC_BITS (SPC5_ME_MC_SYSCLK_FMPLL0 | \
+ SPC5_ME_MC_IRCON | \
+ SPC5_ME_MC_XOSC0ON | \
+ SPC5_ME_MC_PLL0ON | \
+ SPC5_ME_MC_CFLAON_NORMAL | \
+ SPC5_ME_MC_DFLAON_NORMAL | \
+ SPC5_ME_MC_MVRON)
+#endif
+
+/**
+ * @brief HALT0 mode settings.
+ */
+#if !defined(SPC5_ME_HALT0_MC_BITS) || defined(__DOXYGEN__)
+#define SPC5_ME_HALT0_MC_BITS (SPC5_ME_MC_SYSCLK_FMPLL0 | \
+ SPC5_ME_MC_IRCON | \
+ SPC5_ME_MC_XOSC0ON | \
+ SPC5_ME_MC_PLL0ON | \
+ SPC5_ME_MC_CFLAON_NORMAL | \
+ SPC5_ME_MC_DFLAON_NORMAL | \
+ SPC5_ME_MC_MVRON)
+#endif
+
+/**
+ * @brief STOP0 mode settings.
+ */
+#if !defined(SPC5_ME_STOP0_MC_BITS) || defined(__DOXYGEN__)
+#define SPC5_ME_STOP0_MC_BITS (SPC5_ME_MC_SYSCLK_FMPLL0 | \
+ SPC5_ME_MC_IRCON | \
+ SPC5_ME_MC_XOSC0ON | \
+ SPC5_ME_MC_PLL0ON | \
+ SPC5_ME_MC_CFLAON_NORMAL | \
+ SPC5_ME_MC_DFLAON_NORMAL | \
+ SPC5_ME_MC_MVRON)
+#endif
+
+/**
+ * @brief STANDBY0 mode settings.
+ */
+#if !defined(SPC5_ME_STANDBY0_MC_BITS) || defined(__DOXYGEN__)
+#define SPC5_ME_STANDBY0_MC_BITS (SPC5_ME_MC_SYSCLK_FMPLL0 | \
+ SPC5_ME_MC_IRCON | \
+ SPC5_ME_MC_XOSC0ON | \
+ SPC5_ME_MC_PLL0ON | \
+ SPC5_ME_MC_CFLAON_NORMAL | \
+ SPC5_ME_MC_DFLAON_NORMAL | \
+ SPC5_ME_MC_MVRON)
+#endif
+
+/**
+ * @brief Peripheral mode 0 (run mode).
+ * @note Do not change this setting, it is expected to be the "never run"
+ * mode.
+ */
+#if !defined(SPC5_ME_RUN_PC0_BITS) || defined(__DOXYGEN__)
+#define SPC5_ME_RUN_PC0_BITS 0
+#endif
+
+/**
+ * @brief Peripheral mode 1 (run mode).
+ * @note Do not change this setting, it is expected to be the "always run"
+ * mode.
+ */
+#if !defined(SPC5_ME_RUN_PC1_BITS) || defined(__DOXYGEN__)
+#define SPC5_ME_RUN_PC1_BITS (SPC5_ME_RUN_PC_TEST | \
+ SPC5_ME_RUN_PC_SAFE | \
+ SPC5_ME_RUN_PC_DRUN | \
+ SPC5_ME_RUN_PC_RUN0 | \
+ SPC5_ME_RUN_PC_RUN1 | \
+ SPC5_ME_RUN_PC_RUN2 | \
+ SPC5_ME_RUN_PC_RUN3)
+#endif
+
+/**
+ * @brief Peripheral mode 2 (run mode).
+ * @note Do not change this setting, it is expected to be the "only during
+ * normal run" mode.
+ */
+#if !defined(SPC5_ME_RUN_PC2_BITS) || defined(__DOXYGEN__)
+#define SPC5_ME_RUN_PC2_BITS (SPC5_ME_RUN_PC_DRUN | \
+ SPC5_ME_RUN_PC_RUN0 | \
+ SPC5_ME_RUN_PC_RUN1 | \
+ SPC5_ME_RUN_PC_RUN2 | \
+ SPC5_ME_RUN_PC_RUN3)
+#endif
+
+/**
+ * @brief Peripheral mode 3 (run mode).
+ * @note Not defined, available to application-specific modes.
+ */
+#if !defined(SPC5_ME_RUN_PC3_BITS) || defined(__DOXYGEN__)
+#define SPC5_ME_RUN_PC3_BITS (SPC5_ME_RUN_PC_RUN0 | \
+ SPC5_ME_RUN_PC_RUN1 | \
+ SPC5_ME_RUN_PC_RUN2 | \
+ SPC5_ME_RUN_PC_RUN3)
+#endif
+
+/**
+ * @brief Peripheral mode 4 (run mode).
+ * @note Not defined, available to application-specific modes.
+ */
+#if !defined(SPC5_ME_RUN_PC4_BITS) || defined(__DOXYGEN__)
+#define SPC5_ME_RUN_PC4_BITS (SPC5_ME_RUN_PC_RUN0 | \
+ SPC5_ME_RUN_PC_RUN1 | \
+ SPC5_ME_RUN_PC_RUN2 | \
+ SPC5_ME_RUN_PC_RUN3)
+#endif
+
+/**
+ * @brief Peripheral mode 5 (run mode).
+ * @note Not defined, available to application-specific modes.
+ */
+#if !defined(SPC5_ME_RUN_PC5_BITS) || defined(__DOXYGEN__)
+#define SPC5_ME_RUN_PC5_BITS (SPC5_ME_RUN_PC_RUN0 | \
+ SPC5_ME_RUN_PC_RUN1 | \
+ SPC5_ME_RUN_PC_RUN2 | \
+ SPC5_ME_RUN_PC_RUN3)
+#endif
+
+/**
+ * @brief Peripheral mode 6 (run mode).
+ * @note Not defined, available to application-specific modes.
+ */
+#if !defined(SPC5_ME_RUN_PC6_BITS) || defined(__DOXYGEN__)
+#define SPC5_ME_RUN_PC6_BITS (SPC5_ME_RUN_PC_RUN0 | \
+ SPC5_ME_RUN_PC_RUN1 | \
+ SPC5_ME_RUN_PC_RUN2 | \
+ SPC5_ME_RUN_PC_RUN3)
+#endif
+
+/**
+ * @brief Peripheral mode 7 (run mode).
+ * @note Not defined, available to application-specific modes.
+ */
+#if !defined(SPC5_ME_RUN_PC7_BITS) || defined(__DOXYGEN__)
+#define SPC5_ME_RUN_PC7_BITS (SPC5_ME_RUN_PC_RUN0 | \
+ SPC5_ME_RUN_PC_RUN1 | \
+ SPC5_ME_RUN_PC_RUN2 | \
+ SPC5_ME_RUN_PC_RUN3)
+#endif
+
+/**
+ * @brief Peripheral mode 0 (low power mode).
+ * @note Do not change this setting, it is expected to be the "never run"
+ * mode.
+ */
+#if !defined(SPC5_ME_LP_PC0_BITS) || defined(__DOXYGEN__)
+#define SPC5_ME_LP_PC0_BITS 0
+#endif
+
+/**
+ * @brief Peripheral mode 1 (low power mode).
+ * @note Do not change this setting, it is expected to be the "always run"
+ * mode.
+ */
+#if !defined(SPC5_ME_LP_PC1_BITS) || defined(__DOXYGEN__)
+#define SPC5_ME_LP_PC1_BITS (SPC5_ME_LP_PC_HALT0 | \
+ SPC5_ME_LP_PC_STOP0 | \
+ SPC5_ME_LP_PC_STANDBY0)
+#endif
+
+/**
+ * @brief Peripheral mode 2 (low power mode).
+ * @note Do not change this setting, it is expected to be the "halt only"
+ * mode.
+ */
+#if !defined(SPC5_ME_LP_PC2_BITS) || defined(__DOXYGEN__)
+#define SPC5_ME_LP_PC2_BITS (SPC5_ME_LP_PC_HALT0)
+#endif
+
+/**
+ * @brief Peripheral mode 3 (low power mode).
+ * @note Do not change this setting, it is expected to be the "stop only"
+ * mode.
+ */
+#if !defined(SPC5_ME_LP_PC3_BITS) || defined(__DOXYGEN__)
+#define SPC5_ME_LP_PC3_BITS (SPC5_ME_LP_PC_STOP0)
+#endif
+
+/**
+ * @brief Peripheral mode 4 (low power mode).
+ * @note Not defined, available to application-specific modes.
+ */
+#if !defined(SPC5_ME_LP_PC4_BITS) || defined(__DOXYGEN__)
+#define SPC5_ME_LP_PC4_BITS (SPC5_ME_LP_PC_HALT0 | \
+ SPC5_ME_LP_PC_STOP0)
+#endif
+
+/**
+ * @brief Peripheral mode 5 (low power mode).
+ * @note Not defined, available to application-specific modes.
+ */
+#if !defined(SPC5_ME_LP_PC5_BITS) || defined(__DOXYGEN__)
+#define SPC5_ME_LP_PC5_BITS (SPC5_ME_LP_PC_HALT0 | \
+ SPC5_ME_LP_PC_STOP0)
+#endif
+
+/**
+ * @brief Peripheral mode 6 (low power mode).
+ * @note Not defined, available to application-specific modes.
+ */
+#if !defined(SPC5_ME_LP_PC6_BITS) || defined(__DOXYGEN__)
+#define SPC5_ME_LP_PC6_BITS (SPC5_ME_LP_PC_HALT0 | \
+ SPC5_ME_LP_PC_STOP0)
+#endif
+
+/**
+ * @brief Peripheral mode 7 (low power mode).
+ * @note Not defined, available to application-specific modes.
+ */
+#if !defined(SPC5_ME_LP_PC7_BITS) || defined(__DOXYGEN__)
+#define SPC5_ME_LP_PC7_BITS (SPC5_ME_LP_PC_HALT0 | \
+ SPC5_ME_LP_PC_STOP0)
+#endif
+
+/**
+ * @brief PIT channel 0 IRQ priority.
+ * @note This PIT channel is allocated permanently for system tick
+ * generation.
+ */
+#if !defined(SPC5_PIT0_IRQ_PRIORITY) || defined(__DOXYGEN__)
+#define SPC5_PIT0_IRQ_PRIORITY 4
+#endif
+
+/**
+ * @brief Clock initialization failure hook.
+ * @note The default is to stop the system and let the RTC restart it.
+ * @note The hook code must not return.
+ */
+#if !defined(SPC5_CLOCK_FAILURE_HOOK) || defined(__DOXYGEN__)
+#define SPC5_CLOCK_FAILURE_HOOK() chSysHalt()
+#endif
+
+/*===========================================================================*/
+/* Derived constants and error checks. */
+/*===========================================================================*/
+
+/*
+ * Configuration-related checks.
+ */
+#if !defined(SPC560BCxx_MCUCONF)
+#error "Using a wrong mcuconf.h file, SPC560BCxx_MCUCONF not defined"
+#endif
+
+/* Check on the XOSC frequency.*/
+#if (SPC5_XOSC_CLK < SPC5_XOSC_CLK_MIN) || \
+ (SPC5_XOSC_CLK > SPC5_XOSC_CLK_MAX)
+#error "invalid SPC5_XOSC_CLK value specified"
+#endif
+
+/* Check on the XOSC divider.*/
+#if (SPC5_XOSCDIV_VALUE < 1) || (SPC5_XOSCDIV_VALUE > 32)
+#error "invalid SPC5_XOSCDIV_VALUE value specified"
+#endif
+
+/* Check on the IRC divider.*/
+#if (SPC5_IRCDIV_VALUE < 1) || (SPC5_IRCDIV_VALUE > 32)
+#error "invalid SPC5_IRCDIV_VALUE value specified"
+#endif
+
+/* Check on SPC5_FMPLL0_IDF_VALUE.*/
+#if (SPC5_FMPLL0_IDF_VALUE < 1) || (SPC5_FMPLL0_IDF_VALUE > 15)
+#error "invalid SPC5_FMPLL0_IDF_VALUE value specified"
+#endif
+
+/* Check on SPC5_FMPLL0_NDIV_VALUE.*/
+#if (SPC5_FMPLL0_NDIV_VALUE < 32) || (SPC5_FMPLL0_NDIV_VALUE > 96)
+#error "invalid SPC5_FMPLL0_NDIV_VALUE value specified"
+#endif
+
+/* Check on SPC5_FMPLL0_ODF.*/
+#if (SPC5_FMPLL0_ODF == SPC5_FMPLL_ODF_DIV2)
+#define SPC5_FMPLL0_ODF_VALUE 2
+#elif (SPC5_FMPLL0_ODF == SPC5_FMPLL_ODF_DIV4)
+#define SPC5_FMPLL0_ODF_VALUE 4
+#elif (SPC5_FMPLL0_ODF == SPC5_FMPLL_ODF_DIV8)
+#define SPC5_FMPLL0_ODF_VALUE 8
+#elif (SPC5_FMPLL0_ODF == SPC5_FMPLL_ODF_DIV16)
+#define SPC5_FMPLL0_ODF_VALUE 16
+#else
+#error "invalid SPC5_FMPLL0_ODF value specified"
+#endif
+
+/**
+ * @brief SPC5_FMPLL0_VCO_CLK clock point.
+ */
+#define SPC5_FMPLL0_VCO_CLK \
+ ((SPC5_XOSC_CLK / SPC5_FMPLL0_IDF_VALUE) * SPC5_FMPLL0_NDIV_VALUE)
+
+/* Check on FMPLL0 VCO output.*/
+#if (SPC5_FMPLL0_VCO_CLK < SPC5_FMPLLVCO_MIN) || \
+ (SPC5_FMPLL0_VCO_CLK > SPC5_FMPLLVCO_MAX)
+#error "SPC5_FMPLL0_VCO_CLK outside acceptable range (SPC5_FMPLLVCO_MIN...SPC5_FMPLLVCO_MAX)"
+#endif
+
+/**
+ * @brief SPC5_FMPLL0_CLK clock point.
+ */
+#define SPC5_FMPLL0_CLK \
+ (SPC5_FMPLL0_VCO_CLK / SPC5_FMPLL0_ODF_VALUE)
+
+/* Check on SPC5_FMPLL0_CLK.*/
+#if (SPC5_FMPLL0_CLK > SPC5_FMPLL0_CLK_MAX) && !SPC5_ALLOW_OVERCLOCK
+#error "SPC5_FMPLL0_CLK outside acceptable range (0...SPC5_FMPLL0_CLK_MAX)"
+#endif
+
+/* Check on the peripherals set 1 clock divider settings.*/
+#if SPC5_PERIPHERAL1_CLK_DIV_VALUE == 0
+#define SPC5_CGM_SC_DC0 0
+#elif (SPC5_PERIPHERAL1_CLK_DIV_VALUE >= 1) && \
+ (SPC5_PERIPHERAL1_CLK_DIV_VALUE <= 16)
+#define SPC5_CGM_SC_DC0 (0x80 | (SPC5_PERIPHERAL1_CLK_DIV_VALUE - 1))
+#else
+#error "invalid SPC5_PERIPHERAL1_CLK_DIV_VALUE value specified"
+#endif
+
+/* Check on the peripherals set 2 clock divider settings.*/
+#if SPC5_PERIPHERAL2_CLK_DIV_VALUE == 0
+#define SPC5_CGM_SC_DC1 0
+#elif (SPC5_PERIPHERAL2_CLK_DIV_VALUE >= 1) && \
+ (SPC5_PERIPHERAL2_CLK_DIV_VALUE <= 16)
+#define SPC5_CGM_SC_DC1 (0x80 | (SPC5_PERIPHERAL2_CLK_DIV_VALUE - 1))
+#else
+#error "invalid SPC5_PERIPHERAL2_CLK_DIV_VALUE value specified"
+#endif
+
+/* Check on the peripherals set 3 clock divider settings.*/
+#if SPC5_PERIPHERAL3_CLK_DIV_VALUE == 0
+#define SPC5_CGM_SC_DC2 0
+#elif (SPC5_PERIPHERAL3_CLK_DIV_VALUE >= 1) && \
+ (SPC5_PERIPHERAL3_CLK_DIV_VALUE <= 16)
+#define SPC5_CGM_SC_DC2 (0x80 | (SPC5_PERIPHERAL3_CLK_DIV_VALUE - 1))
+#else
+#error "invalid SPC5_PERIPHERAL3_CLK_DIV_VALUE value specified"
+#endif
+
+/*===========================================================================*/
+/* Driver data structures and types. */
+/*===========================================================================*/
+
+typedef enum {
+ SPC5_RUNMODE_TEST = 1,
+ SPC5_RUNMODE_SAFE = 2,
+ SPC5_RUNMODE_DRUN = 3,
+ SPC5_RUNMODE_RUN0 = 4,
+ SPC5_RUNMODE_RUN1 = 5,
+ SPC5_RUNMODE_RUN2 = 6,
+ SPC5_RUNMODE_RUN3 = 7,
+ SPC5_RUNMODE_HALT0 = 8,
+ SPC5_RUNMODE_STOP0 = 10
+} spc5_runmode_t;
+
+/*===========================================================================*/
+/* Driver macros. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* External declarations. */
+/*===========================================================================*/
+
+#include "spc5_edma.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+ void hal_lld_init(void);
+ void spc_clock_init(void);
+ bool_t halSPCSetRunMode(spc5_runmode_t mode);
+ void halSPCSetPeripheralClockMode(uint32_t n, uint32_t pctl);
+#if !SPC5_NO_INIT
+ uint32_t halSPCGetSystemClock(void);
+#endif
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* _HAL_LLD_H_ */
+
+/** @} */
|