diff options
Diffstat (limited to 'demos/STM32/RT-STM32F407-OLIMEX_E407-LWIP-FATFS-USB')
-rw-r--r-- | demos/STM32/RT-STM32F407-OLIMEX_E407-LWIP-FATFS-USB/ffconf.h | 180 | ||||
-rw-r--r-- | demos/STM32/RT-STM32F407-OLIMEX_E407-LWIP-FATFS-USB/main.c | 2 |
2 files changed, 92 insertions, 90 deletions
diff --git a/demos/STM32/RT-STM32F407-OLIMEX_E407-LWIP-FATFS-USB/ffconf.h b/demos/STM32/RT-STM32F407-OLIMEX_E407-LWIP-FATFS-USB/ffconf.h index c179b25d9..18af4c94e 100644 --- a/demos/STM32/RT-STM32F407-OLIMEX_E407-LWIP-FATFS-USB/ffconf.h +++ b/demos/STM32/RT-STM32F407-OLIMEX_E407-LWIP-FATFS-USB/ffconf.h @@ -2,23 +2,23 @@ #include "ch.h" /*---------------------------------------------------------------------------/ -/ FatFs - FAT file system module configuration file +/ FatFs - Configuration file /---------------------------------------------------------------------------*/ -#define _FFCONF 68020 /* Revision ID */ +#define FFCONF_DEF 87030 /* Revision ID */ /*---------------------------------------------------------------------------/ / Function Configurations /---------------------------------------------------------------------------*/ -#define _FS_READONLY 0 +#define FF_FS_READONLY 0 /* This option switches read-only configuration. (0:Read/Write or 1:Read-only) / Read-only configuration removes writing API functions, f_write(), f_sync(), / f_unlink(), f_mkdir(), f_chmod(), f_rename(), f_truncate(), f_getfree() / and optional writing functions as well. */ -#define _FS_MINIMIZE 0 +#define FF_FS_MINIMIZE 0 /* This option defines minimization level to remove some basic API functions. / / 0: All basic functions are enabled. @@ -28,43 +28,42 @@ / 3: f_lseek() function is removed in addition to 2. */ -#define _USE_STRFUNC 0 -/* This option switches string functions, f_gets(), f_putc(), f_puts() and -/ f_printf(). +#define FF_USE_STRFUNC 0 +/* This option switches string functions, f_gets(), f_putc(), f_puts() and f_printf(). / / 0: Disable string functions. / 1: Enable without LF-CRLF conversion. / 2: Enable with LF-CRLF conversion. */ -#define _USE_FIND 0 +#define FF_USE_FIND 0 /* This option switches filtered directory read functions, f_findfirst() and / f_findnext(). (0:Disable, 1:Enable 2:Enable with matching altname[] too) */ -#define _USE_MKFS 0 +#define FF_USE_MKFS 0 /* This option switches f_mkfs() function. (0:Disable or 1:Enable) */ -#define _USE_FASTSEEK 0 +#define FF_USE_FASTSEEK 0 /* This option switches fast seek function. (0:Disable or 1:Enable) */ -#define _USE_EXPAND 0 +#define FF_USE_EXPAND 0 /* This option switches f_expand function. (0:Disable or 1:Enable) */ -#define _USE_CHMOD 0 +#define FF_USE_CHMOD 0 /* This option switches attribute manipulation functions, f_chmod() and f_utime(). -/ (0:Disable or 1:Enable) Also _FS_READONLY needs to be 0 to enable this option. */ +/ (0:Disable or 1:Enable) Also FF_FS_READONLY needs to be 0 to enable this option. */ -#define _USE_LABEL 0 +#define FF_USE_LABEL 0 /* This option switches volume label functions, f_getlabel() and f_setlabel(). / (0:Disable or 1:Enable) */ -#define _USE_FORWARD 0 +#define FF_USE_FORWARD 0 /* This option switches f_forward() function. (0:Disable or 1:Enable) */ @@ -72,11 +71,10 @@ / Locale and Namespace Configurations /---------------------------------------------------------------------------*/ -#define _CODE_PAGE 850 +#define FF_CODE_PAGE 850 /* This option specifies the OEM code page to be used on the target system. -/ Incorrect setting of the code page can cause a file open failure. +/ Incorrect code page setting can cause a file open failure. / -/ 1 - ASCII (No extended character. Non-LFN cfg. only) / 437 - U.S. / 720 - Arabic / 737 - Greek @@ -98,47 +96,50 @@ / 936 - Simplified Chinese (DBCS) / 949 - Korean (DBCS) / 950 - Traditional Chinese (DBCS) +/ 0 - Include all code pages above and configured by f_setcp() */ -#define _USE_LFN 3 -#define _MAX_LFN 255 -/* The _USE_LFN switches the support of long file name (LFN). +#define FF_USE_LFN 3 +#define FF_MAX_LFN 255 +/* The FF_USE_LFN switches the support for LFN (long file name). / -/ 0: Disable support of LFN. _MAX_LFN has no effect. +/ 0: Disable LFN. FF_MAX_LFN has no effect. / 1: Enable LFN with static working buffer on the BSS. Always NOT thread-safe. / 2: Enable LFN with dynamic working buffer on the STACK. / 3: Enable LFN with dynamic working buffer on the HEAP. / / To enable the LFN, Unicode handling functions (option/unicode.c) must be added -/ to the project. The working buffer occupies (_MAX_LFN + 1) * 2 bytes and -/ additional 608 bytes at exFAT enabled. _MAX_LFN can be in range from 12 to 255. +/ to the project. The working buffer occupies (FF_MAX_LFN + 1) * 2 bytes and +/ additional 608 bytes at exFAT enabled. FF_MAX_LFN can be in range from 12 to 255. / It should be set 255 to support full featured LFN operations. / When use stack for the working buffer, take care on stack overflow. When use heap / memory for the working buffer, memory management functions, ff_memalloc() and / ff_memfree(), must be added to the project. */ -#define _LFN_UNICODE 0 -/* This option switches character encoding on the API. (0:ANSI/OEM or 1:UTF-16) -/ To use Unicode string for the path name, enable LFN and set _LFN_UNICODE = 1. -/ This option also affects behavior of string I/O functions. */ +#define FF_LFN_UNICODE 0 +/* This option switches character encoding on the API, 0:ANSI/OEM or 1:UTF-16, +/ when LFN is enabled. Also behavior of string I/O functions will be affected by +/ this option. When LFN is not enabled, this option has no effect. +*/ -#define _STRF_ENCODE 3 -/* When _LFN_UNICODE == 1, this option selects the character encoding ON THE FILE to -/ be read/written via string I/O functions, f_gets(), f_putc(), f_puts and f_printf(). -/ -/ 0: ANSI/OEM -/ 1: UTF-16LE -/ 2: UTF-16BE -/ 3: UTF-8 +#define FF_STRF_ENCODE 3 +/* When FF_LFN_UNICODE = 1 with LFN enabled, string I/O functions, f_gets(), +/ f_putc(), f_puts and f_printf() convert the character encoding in it. +/ This option selects assumption of character encoding ON THE FILE to be +/ read/written via those functions. / -/ This option has no effect when _LFN_UNICODE == 0. */ +/ 0: ANSI/OEM +/ 1: UTF-16LE +/ 2: UTF-16BE +/ 3: UTF-8 +*/ -#define _FS_RPATH 0 -/* This option configures support of relative path. +#define FF_FS_RPATH 0 +/* This option configures support for relative path. / / 0: Disable relative path and remove related functions. / 1: Enable relative path. f_chdir() and f_chdrive() are available. @@ -150,45 +151,45 @@ / Drive/Volume Configurations /---------------------------------------------------------------------------*/ -#define _VOLUMES 1 -/* Number of volumes (logical drives) to be used. */ +#define FF_VOLUMES 1 +/* Number of volumes (logical drives) to be used. (1-10) */ -#define _STR_VOLUME_ID 0 -#define _VOLUME_STRS "RAM","NAND","CF","SD","SD2","USB","USB2","USB3" -/* _STR_VOLUME_ID switches string support of volume ID. -/ When _STR_VOLUME_ID is set to 1, also pre-defined strings can be used as drive -/ number in the path name. _VOLUME_STRS defines the drive ID strings for each -/ logical drives. Number of items must be equal to _VOLUMES. Valid characters for +#define FF_STR_VOLUME_ID 0 +#define FF_VOLUME_STRS "RAM","NAND","CF","SD","SD2","USB","USB2","USB3" +/* FF_STR_VOLUME_ID switches string support for volume ID. +/ When FF_STR_VOLUME_ID is set to 1, also pre-defined strings can be used as drive +/ number in the path name. FF_VOLUME_STRS defines the drive ID strings for each +/ logical drives. Number of items must be equal to FF_VOLUMES. Valid characters for / the drive ID strings are: A-Z and 0-9. */ -#define _MULTI_PARTITION 0 -/* This option switches support of multi-partition on a physical drive. +#define FF_MULTI_PARTITION 0 +/* This option switches support for multiple volumes on the physical drive. / By default (0), each logical drive number is bound to the same physical drive / number and only an FAT volume found on the physical drive will be mounted. -/ When multi-partition is enabled (1), each logical drive number can be bound to +/ When this function is enabled (1), each logical drive number can be bound to / arbitrary physical drive and partition listed in the VolToPart[]. Also f_fdisk() / funciton will be available. */ -#define _MIN_SS 512 -#define _MAX_SS 512 -/* These options configure the range of sector size to be supported. (512, 1024, -/ 2048 or 4096) Always set both 512 for most systems, all type of memory cards and +#define FF_MIN_SS 512 +#define FF_MAX_SS 512 +/* This set of options configures the range of sector size to be supported. (512, +/ 1024, 2048 or 4096) Always set both 512 for most systems, generic memory card and / harddisk. But a larger value may be required for on-board flash memory and some -/ type of optical media. When _MAX_SS is larger than _MIN_SS, FatFs is configured -/ to variable sector size and GET_SECTOR_SIZE command must be implemented to the -/ disk_ioctl() function. */ +/ type of optical media. When FF_MAX_SS is larger than FF_MIN_SS, FatFs is configured +/ for variable sector size mode and disk_ioctl() function needs to implement +/ GET_SECTOR_SIZE command. */ -#define _USE_TRIM 0 -/* This option switches support of ATA-TRIM. (0:Disable or 1:Enable) +#define FF_USE_TRIM 0 +/* This option switches support for ATA-TRIM. (0:Disable or 1:Enable) / To enable Trim function, also CTRL_TRIM command should be implemented to the / disk_ioctl() function. */ -#define _FS_NOFSINFO 0 +#define FF_FS_NOFSINFO 0 /* If you need to know correct free space on the FAT32 volume, set bit 0 of this / option, and f_getfree() function at first time after volume mount will force / a full FAT scan. Bit 1 controls the use of last allocated cluster number. @@ -205,36 +206,36 @@ / System Configurations /---------------------------------------------------------------------------*/ -#define _FS_TINY 0 +#define FF_FS_TINY 0 /* This option switches tiny buffer configuration. (0:Normal or 1:Tiny) -/ At the tiny configuration, size of file object (FIL) is reduced _MAX_SS bytes. +/ At the tiny configuration, size of file object (FIL) is shrinked FF_MAX_SS bytes. / Instead of private sector buffer eliminated from the file object, common sector -/ buffer in the file system object (FATFS) is used for the file data transfer. */ +/ buffer in the filesystem object (FATFS) is used for the file data transfer. */ -#define _FS_EXFAT 1 -/* This option switches support of exFAT file system. (0:Disable or 1:Enable) -/ When enable exFAT, also LFN needs to be enabled. (_USE_LFN >= 1) -/ Note that enabling exFAT discards C89 compatibility. */ +#define FF_FS_EXFAT 1 +/* This option switches support for exFAT filesystem. (0:Disable or 1:Enable) +/ When enable exFAT, also LFN needs to be enabled. +/ Note that enabling exFAT discards ANSI C (C89) compatibility. */ -#define _FS_NORTC 0 -#define _NORTC_MON 1 -#define _NORTC_MDAY 1 -#define _NORTC_YEAR 2016 -/* The option _FS_NORTC switches timestamp functiton. If the system does not have -/ any RTC function or valid timestamp is not needed, set _FS_NORTC = 1 to disable +#define FF_FS_NORTC 1 +#define FF_NORTC_MON 5 +#define FF_NORTC_MDAY 1 +#define FF_NORTC_YEAR 2017 +/* The option FF_FS_NORTC switches timestamp functiton. If the system does not have +/ any RTC function or valid timestamp is not needed, set FF_FS_NORTC = 1 to disable / the timestamp function. All objects modified by FatFs will have a fixed timestamp -/ defined by _NORTC_MON, _NORTC_MDAY and _NORTC_YEAR in local time. -/ To enable timestamp function (_FS_NORTC = 0), get_fattime() function need to be -/ added to the project to get current time form real-time clock. _NORTC_MON, -/ _NORTC_MDAY and _NORTC_YEAR have no effect. -/ These options have no effect at read-only configuration (_FS_READONLY = 1). */ +/ defined by FF_NORTC_MON, FF_NORTC_MDAY and FF_NORTC_YEAR in local time. +/ To enable timestamp function (FF_FS_NORTC = 0), get_fattime() function need to be +/ added to the project to read current time form real-time clock. FF_NORTC_MON, +/ FF_NORTC_MDAY and FF_NORTC_YEAR have no effect. +/ These options have no effect at read-only configuration (FF_FS_READONLY = 1). */ -#define _FS_LOCK 0 -/* The option _FS_LOCK switches file lock function to control duplicated file open -/ and illegal operation to open objects. This option must be 0 when _FS_READONLY +#define FF_FS_LOCK 0 +/* The option FF_FS_LOCK switches file lock function to control duplicated file open +/ and illegal operation to open objects. This option must be 0 when FF_FS_READONLY / is 1. / / 0: Disable file lock function. To avoid volume corruption, application program @@ -244,27 +245,28 @@ / lock control is independent of re-entrancy. */ -#define _FS_REENTRANT 0 -#define _FS_TIMEOUT MS2ST(1000) -#define _SYNC_t semaphore_t* -/* The option _FS_REENTRANT switches the re-entrancy (thread safe) of the FatFs +#define FF_FS_REENTRANT 0 +#define FF_FS_TIMEOUT MS2ST(1000) +#define FF_SYNC_t semaphore_t* +/* The option FF_FS_REENTRANT switches the re-entrancy (thread safe) of the FatFs / module itself. Note that regardless of this option, file access to different / volume is always re-entrant and volume control functions, f_mount(), f_mkfs() / and f_fdisk() function, are always not re-entrant. Only file/directory access / to the same volume is under control of this function. / -/ 0: Disable re-entrancy. _FS_TIMEOUT and _SYNC_t have no effect. +/ 0: Disable re-entrancy. FF_FS_TIMEOUT and FF_SYNC_t have no effect. / 1: Enable re-entrancy. Also user provided synchronization handlers, / ff_req_grant(), ff_rel_grant(), ff_del_syncobj() and ff_cre_syncobj() / function, must be added to the project. Samples are available in / option/syscall.c. / -/ The _FS_TIMEOUT defines timeout period in unit of time tick. -/ The _SYNC_t defines O/S dependent sync object type. e.g. HANDLE, ID, OS_EVENT*, -/ SemaphoreHandle_t and etc.. A header file for O/S definitions needs to be +/ The FF_FS_TIMEOUT defines timeout period in unit of time tick. +/ The FF_SYNC_t defines O/S dependent sync object type. e.g. HANDLE, ID, OS_EVENT*, +/ SemaphoreHandle_t and etc. A header file for O/S definitions needs to be / included somewhere in the scope of ff.h. */ /* #include <windows.h> // O/S definitions */ + /*--- End of configuration options ---*/ diff --git a/demos/STM32/RT-STM32F407-OLIMEX_E407-LWIP-FATFS-USB/main.c b/demos/STM32/RT-STM32F407-OLIMEX_E407-LWIP-FATFS-USB/main.c index 9bf0a0699..f329b136f 100644 --- a/demos/STM32/RT-STM32F407-OLIMEX_E407-LWIP-FATFS-USB/main.c +++ b/demos/STM32/RT-STM32F407-OLIMEX_E407-LWIP-FATFS-USB/main.c @@ -126,7 +126,7 @@ static FRESULT scan_files(BaseSequentialStream *chp, char *path) { if (res == FR_OK) { i = strlen(path); while (((res = f_readdir(&dir, &fno)) == FR_OK) && fno.fname[0]) { - if (_FS_RPATH && fno.fname[0] == '.') + if (FF_FS_RPATH && fno.fname[0] == '.') continue; fn = fno.fname; if (fno.fattrib & AM_DIR) { |