diff options
Diffstat (limited to 'demos/STM32/RT-STM32F103-MAPLEMINI/readme.txt')
| -rw-r--r-- | demos/STM32/RT-STM32F103-MAPLEMINI/readme.txt | 7 |
1 files changed, 3 insertions, 4 deletions
diff --git a/demos/STM32/RT-STM32F103-MAPLEMINI/readme.txt b/demos/STM32/RT-STM32F103-MAPLEMINI/readme.txt index 197a1b143..edc414932 100644 --- a/demos/STM32/RT-STM32F103-MAPLEMINI/readme.txt +++ b/demos/STM32/RT-STM32F103-MAPLEMINI/readme.txt @@ -23,14 +23,13 @@ Just modify the TRGT line in the makefile in order to use different GCC ports. ** Flashing Target Board **
-To flash the firmware to the maplemini, an additional Make target has been
-added. It requies dfu-util. While the MapleMini is connected via USB and
+To flash the firmware to the maplemini, you can use dfu-util. While the MapleMini is connected via USB and
still in bootloader mode, just run
- > make flash_usb
+ > dfu-util -a1 -d 1eaf:0003 -D build/ch.bin -R
If you compiled without the bootloader support, you will have to flash via the
-original serial flashing method. Please see
+original serial flashing method or via SWD. For the serial method please see
http://static.leaflabs.com/pub/leaflabs/maple-docs/latest/bootloader.html#id7
for a howto. there you can also get the official bootloader files.
As a quick reference:
|