diff options
Diffstat (limited to 'demos/AVR-ATmega128-GCC')
| -rw-r--r-- | demos/AVR-ATmega128-GCC/Makefile | 652 | ||||
| -rw-r--r-- | demos/AVR-ATmega128-GCC/chconf.h | 531 | ||||
| -rw-r--r-- | demos/AVR-ATmega128-GCC/halconf.h | 312 | ||||
| -rw-r--r-- | demos/AVR-ATmega128-GCC/lcd.c | 97 | ||||
| -rw-r--r-- | demos/AVR-ATmega128-GCC/lcd.h | 49 | ||||
| -rw-r--r-- | demos/AVR-ATmega128-GCC/main.c | 73 | ||||
| -rw-r--r-- | demos/AVR-ATmega128-GCC/mcuconf.h | 49 | ||||
| -rw-r--r-- | demos/AVR-ATmega128-GCC/readme.txt | 24 |
8 files changed, 0 insertions, 1787 deletions
diff --git a/demos/AVR-ATmega128-GCC/Makefile b/demos/AVR-ATmega128-GCC/Makefile deleted file mode 100644 index 0ea8e8cff..000000000 --- a/demos/AVR-ATmega128-GCC/Makefile +++ /dev/null @@ -1,652 +0,0 @@ -# Hey Emacs, this is a -*- makefile -*-
-#----------------------------------------------------------------------------
-# WinAVR Makefile Template written by Eric B. Weddington, Jörg Wunsch, et al.
-#
-# Released to the Public Domain
-#
-# Additional material for this makefile was written by:
-# Peter Fleury
-# Tim Henigan
-# Colin O'Flynn
-# Reiner Patommel
-# Markus Pfaff
-# Sander Pool
-# Frederik Rouleau
-# Carlos Lamas
-#
-#----------------------------------------------------------------------------
-# On command line:
-#
-# make all = Make software.
-#
-# make clean = Clean out built project files.
-#
-# make coff = Convert ELF to AVR COFF.
-#
-# make extcoff = Convert ELF to AVR Extended COFF.
-#
-# make program = Download the hex file to the device, using avrdude.
-# Please customize the avrdude settings below first!
-#
-# make debug = Start either simulavr or avarice as specified for debugging,
-# with avr-gdb or avr-insight as the front end for debugging.
-#
-# make filename.s = Just compile filename.c into the assembler code only.
-#
-# make filename.i = Create a preprocessed source file for use in submitting
-# bug reports to the GCC project.
-#
-# To rebuild project do "make clean" then "make all".
-#----------------------------------------------------------------------------
-
-
-# MCU name
-MCU = atmega128
-
-
-# Processor frequency.
-# This will define a symbol, F_CPU, in all source code files equal to the
-# processor frequency. You can then use this symbol in your source code to
-# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-# automatically to create a 32-bit value in your source code.
-# Typical values are:
-# F_CPU = 1000000
-# F_CPU = 1843200
-# F_CPU = 2000000
-# F_CPU = 3686400
-# F_CPU = 4000000
-# F_CPU = 7372800
-# F_CPU = 8000000
-# F_CPU = 11059200
-# F_CPU = 14745600
-# F_CPU = 16000000
-# F_CPU = 18432000
-# F_CPU = 20000000
-F_CPU = 16000000
-
-
-# Output format. (can be srec, ihex, binary)
-FORMAT = ihex
-
-
-# Target file name (without extension).
-TARGET = ch
-
-
-# Object files directory
-# To put object files in current directory, use a dot (.), do NOT make
-# this an empty or blank macro!
-OBJDIR = .
-
-
-# Imported source files
-CHIBIOS = ../..
-include $(CHIBIOS)/boards/OLIMEX_AVR_MT_128/board.mk
-include $(CHIBIOS)/os/hal/platforms/AVR/platform.mk
-include $(CHIBIOS)/os/hal/hal.mk
-include $(CHIBIOS)/os/ports/GCC/AVR/port.mk
-include $(CHIBIOS)/os/kernel/kernel.mk
-include $(CHIBIOS)/test/test.mk
-
-
-# List C source files here. (C dependencies are automatically generated.)
-SRC = $(PORTSRC) \
- $(KERNSRC) \
- $(TESTSRC) \
- $(HALSRC) \
- $(PLATFORMSRC) \
- $(BOARDSRC) \
- $(CHIBIOS)/os/various/evtimer.c \
- lcd.c main.c
-
-
-# List C++ source files here. (C dependencies are automatically generated.)
-CPPSRC =
-
-
-# List Assembler source files here.
-# Make them always end in a capital .S. Files ending in a lowercase .s
-# will not be considered source files but generated files (assembler
-# output from the compiler), and will be deleted upon "make clean"!
-# Even though the DOS/Win* filesystem matches both .s and .S the same,
-# it will preserve the spelling of the filenames, and gcc itself does
-# care about how the name is spelled on its command-line.
-ASRC =
-
-
-# Optimization level, can be [0, 1, 2, 3, s].
-# 0 = turn off optimization. s = optimize for size.
-# (Note: 3 is not always the best optimization level. See avr-libc FAQ.)
-OPT = 2
-
-
-# Debugging format.
-# Native formats for AVR-GCC's -g are dwarf-2 [default] or stabs.
-# AVR Studio 4.10 requires dwarf-2.
-# AVR [Extended] COFF format requires stabs, plus an avr-objcopy run.
-DEBUG = dwarf-2
-
-
-# List any extra directories to look for include files here.
-# Each directory must be separated by a space.
-# Use forward slashes for directory separators.
-# For a directory that has spaces, enclose it in quotes.
-EXTRAINCDIRS = $(PORTINC) $(KERNINC) $(TESTINC) \
- $(HALINC) $(PLATFORMINC) $(BOARDINC) \
- $(CHIBIOS)/os/various
-
-
-# Compiler flag to set the C Standard level.
-# c89 = "ANSI" C
-# gnu89 = c89 plus GCC extensions
-# c99 = ISO C99 standard (not yet fully implemented)
-# gnu99 = c99 plus GCC extensions
-CSTANDARD = -std=gnu99
-
-
-# Place -D or -U options here for C sources
-CDEFS = -DF_CPU=$(F_CPU)UL
-
-
-# Place -D or -U options here for ASM sources
-ADEFS = -DF_CPU=$(F_CPU)
-
-
-# Place -D or -U options here for C++ sources
-CPPDEFS = -DF_CPU=$(F_CPU)UL
-#CPPDEFS += -D__STDC_LIMIT_MACROS
-#CPPDEFS += -D__STDC_CONSTANT_MACROS
-
-
-
-#---------------- Compiler Options C ----------------
-# -g*: generate debugging information
-# -O*: optimization level
-# -f...: tuning, see GCC manual and avr-libc documentation
-# -Wall...: warning level
-# -Wa,...: tell GCC to pass this to the assembler.
-# -adhlns...: create assembler listing
-CFLAGS = -g$(DEBUG)
-CFLAGS += $(CDEFS)
-CFLAGS += -O$(OPT)
-CFLAGS += -funsigned-char
-CFLAGS += -funsigned-bitfields
-CFLAGS += -fpack-struct
-CFLAGS += -fshort-enums
-#CFLAGS += -fno-strict-aliasing
-CFLAGS += -Wall
-CFLAGS += -Wstrict-prototypes
-#CFLAGS += -mshort-calls
-#CFLAGS += -fno-unit-at-a-time
-#CFLAGS += -Wundef
-#CFLAGS += -Wunreachable-code
-#CFLAGS += -Wsign-compare
-CFLAGS += -Wa,-adhlns=$(<:%.c=$(OBJDIR)/%.lst)
-CFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))
-CFLAGS += $(CSTANDARD)
-
-
-#---------------- Compiler Options C++ ----------------
-# -g*: generate debugging information
-# -O*: optimization level
-# -f...: tuning, see GCC manual and avr-libc documentation
-# -Wall...: warning level
-# -Wa,...: tell GCC to pass this to the assembler.
-# -adhlns...: create assembler listing
-CPPFLAGS = -g$(DEBUG)
-CPPFLAGS += $(CPPDEFS)
-CPPFLAGS += -O$(OPT)
-CPPFLAGS += -funsigned-char
-CPPFLAGS += -funsigned-bitfields
-CPPFLAGS += -fpack-struct
-CPPFLAGS += -fshort-enums
-CPPFLAGS += -fno-exceptions
-CPPFLAGS += -Wall
-CFLAGS += -Wundef
-#CPPFLAGS += -mshort-calls
-#CPPFLAGS += -fno-unit-at-a-time
-#CPPFLAGS += -Wstrict-prototypes
-#CPPFLAGS += -Wunreachable-code
-#CPPFLAGS += -Wsign-compare
-CPPFLAGS += -Wa,-adhlns=$(<:%.cpp=$(OBJDIR)/%.lst)
-CPPFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))
-#CPPFLAGS += $(CSTANDARD)
-
-
-#---------------- Assembler Options ----------------
-# -Wa,...: tell GCC to pass this to the assembler.
-# -adhlns: create listing
-# -gstabs: have the assembler create line number information; note that
-# for use in COFF files, additional information about filenames
-# and function names needs to be present in the assembler source
-# files -- see avr-libc docs [FIXME: not yet described there]
-# -listing-cont-lines: Sets the maximum number of continuation lines of hex
-# dump that will be displayed for a given single line of source input.
-ASFLAGS = $(ADEFS) -Wa,-adhlns=$(<:%.S=$(OBJDIR)/%.lst),-gstabs,--listing-cont-lines=100
-
-
-#---------------- Library Options ----------------
-# Minimalistic printf version
-PRINTF_LIB_MIN = -Wl,-u,vfprintf -lprintf_min
-
-# Floating point printf version (requires MATH_LIB = -lm below)
-PRINTF_LIB_FLOAT = -Wl,-u,vfprintf -lprintf_flt
-
-# If this is left blank, then it will use the Standard printf version.
-PRINTF_LIB = $(PRINTF_LIB_MIN)
-#PRINTF_LIB = $(PRINTF_LIB_MIN)
-#PRINTF_LIB = $(PRINTF_LIB_FLOAT)
-
-
-# Minimalistic scanf version
-SCANF_LIB_MIN = -Wl,-u,vfscanf -lscanf_min
-
-# Floating point + %[ scanf version (requires MATH_LIB = -lm below)
-SCANF_LIB_FLOAT = -Wl,-u,vfscanf -lscanf_flt
-
-# If this is left blank, then it will use the Standard scanf version.
-SCANF_LIB = $(SCANF_LIB_MIN)
-#SCANF_LIB = $(SCANF_LIB_MIN)
-#SCANF_LIB = $(SCANF_LIB_FLOAT)
-
-
-MATH_LIB = -lm
-
-
-# List any extra directories to look for libraries here.
-# Each directory must be separated by a space.
-# Use forward slashes for directory separators.
-# For a directory that has spaces, enclose it in quotes.
-EXTRALIBDIRS =
-
-
-
-#---------------- External Memory Options ----------------
-
-# 64 KB of external RAM, starting after internal RAM (ATmega128!),
-# used for variables (.data/.bss) and heap (malloc()).
-#EXTMEMOPTS = -Wl,-Tdata=0x801100,--defsym=__heap_end=0x80ffff
-
-# 64 KB of external RAM, starting after internal RAM (ATmega128!),
-# only used for heap (malloc()).
-#EXTMEMOPTS = -Wl,--section-start,.data=0x801100,--defsym=__heap_end=0x80ffff
-
-EXTMEMOPTS =
-
-
-
-#---------------- Linker Options ----------------
-# -Wl,...: tell GCC to pass this to linker.
-# -Map: create map file
-# --cref: add cross reference to map file
-LDFLAGS = -Wl,-Map=$(TARGET).map,--cref
-LDFLAGS += $(EXTMEMOPTS)
-LDFLAGS += $(patsubst %,-L%,$(EXTRALIBDIRS))
-LDFLAGS += $(PRINTF_LIB) $(SCANF_LIB) $(MATH_LIB)
-#LDFLAGS += -T linker_script.x
-
-
-
-#---------------- Programming Options (avrdude) ----------------
-
-# Programming hardware: alf avr910 avrisp bascom bsd
-# dt006 pavr picoweb pony-stk200 sp12 stk200 stk500
-#
-# Type: avrdude -c ?
-# to get a full listing.
-#
-AVRDUDE_PROGRAMMER = stk500
-
-# com1 = serial port. Use lpt1 to connect to parallel port.
-AVRDUDE_PORT = com1 # programmer connected to serial device
-
-AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex
-#AVRDUDE_WRITE_EEPROM = -U eeprom:w:$(TARGET).eep
-
-
-# Uncomment the following if you want avrdude's erase cycle counter.
-# Note that this counter needs to be initialized first using -Yn,
-# see avrdude manual.
-#AVRDUDE_ERASE_COUNTER = -y
-
-# Uncomment the following if you do /not/ wish a verification to be
-# performed after programming the device.
-#AVRDUDE_NO_VERIFY = -V
-
-# Increase verbosity level. Please use this when submitting bug
-# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude>
-# to submit bug reports.
-#AVRDUDE_VERBOSE = -v -v
-
-AVRDUDE_FLAGS = -p $(MCU) -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER)
-AVRDUDE_FLAGS += $(AVRDUDE_NO_VERIFY)
-AVRDUDE_FLAGS += $(AVRDUDE_VERBOSE)
-AVRDUDE_FLAGS += $(AVRDUDE_ERASE_COUNTER)
-
-
-
-#---------------- Debugging Options ----------------
-
-# For simulavr only - target MCU frequency.
-DEBUG_MFREQ = $(F_CPU)
-
-# Set the DEBUG_UI to either gdb or insight.
-# DEBUG_UI = gdb
-DEBUG_UI = insight
-
-# Set the debugging back-end to either avarice, simulavr.
-DEBUG_BACKEND = avarice
-#DEBUG_BACKEND = simulavr
-
-# GDB Init Filename.
-GDBINIT_FILE = __avr_gdbinit
-
-# When using avarice settings for the JTAG
-JTAG_DEV = /dev/com1
-
-# Debugging port used to communicate between GDB / avarice / simulavr.
-DEBUG_PORT = 4242
-
-# Debugging host used to communicate between GDB / avarice / simulavr, normally
-# just set to localhost unless doing some sort of crazy debugging when
-# avarice is running on a different computer.
-DEBUG_HOST = localhost
-
-
-
-#============================================================================
-
-
-# Define programs and commands.
-SHELL = sh
-CC = avr-gcc
-OBJCOPY = avr-objcopy
-OBJDUMP = avr-objdump
-SIZE = avr-size
-AR = avr-ar rcs
-NM = avr-nm
-AVRDUDE = avrdude
-REMOVE = rm -f
-REMOVEDIR = rm -rf
-COPY = cp
-WINSHELL = cmd
-
-
-# Define Messages
-# English
-MSG_ERRORS_NONE = Errors: none
-MSG_BEGIN = -------- begin --------
-MSG_END = -------- end --------
-MSG_SIZE_BEFORE = Size before:
-MSG_SIZE_AFTER = Size after:
-MSG_COFF = Converting to AVR COFF:
-MSG_EXTENDED_COFF = Converting to AVR Extended COFF:
-MSG_FLASH = Creating load file for Flash:
-MSG_EEPROM = Creating load file for EEPROM:
-MSG_EXTENDED_LISTING = Creating Extended Listing:
-MSG_SYMBOL_TABLE = Creating Symbol Table:
-MSG_LINKING = Linking:
-MSG_COMPILING = Compiling C:
-MSG_COMPILING_CPP = Compiling C++:
-MSG_ASSEMBLING = Assembling:
-MSG_CLEANING = Cleaning project:
-MSG_CREATING_LIBRARY = Creating library:
-
-
-
-
-# Define all object files.
-OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o)
-
-# Define all listing files.
-LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst)
-
-
-# Compiler flags to generate dependency files.
-GENDEPFLAGS = -MMD -MP -MF .dep/$(@F).d
-
-
-# Combine all necessary flags and optional flags.
-# Add target processor to flags.
-ALL_CFLAGS = -mmcu=$(MCU) -I. $(CFLAGS) $(GENDEPFLAGS)
-ALL_CPPFLAGS = -mmcu=$(MCU) -I. -x c++ $(CPPFLAGS) $(GENDEPFLAGS)
-ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS)
-
-
-
-
-
-# Default target.
-all: begin gccversion sizebefore build sizeafter end
-
-# Change the build target to build a HEX file or a library.
-build: elf hex bin eep lss sym
-#build: lib
-
-
-elf: $(TARGET).elf
-hex: $(TARGET).hex
-bin: $(TARGET).bin
-eep: $(TARGET).eep
-lss: $(TARGET).lss
-sym: $(TARGET).sym
-LIBNAME=lib$(TARGET).a
-lib: $(LIBNAME)
-
-
-
-# Eye candy.
-# AVR Studio 3.x does not check make's exit code but relies on
-# the following magic strings to be generated by the compile job.
-begin:
- @echo
- @echo $(MSG_BEGIN)
-
-end:
- @echo $(MSG_END)
- @echo
-
-
-# Display size of file.
-HEXSIZE = $(SIZE) --target=$(FORMAT) $(TARGET).hex
-ELFSIZE = $(SIZE) --mcu=$(MCU) --format=avr $(TARGET).elf
-
-sizebefore:
- @if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_BEFORE); $(ELFSIZE); \
- 2>/dev/null; echo; fi
-
-sizeafter:
- @if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \
- 2>/dev/null; echo; fi
-
-
-
-# Display compiler version information.
-gccversion :
- @$(CC) --version
-
-
-
-# Program the device.
-program: $(TARGET).hex $(TARGET).eep
- $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)
-
-
-# Generate avr-gdb config/init file which does the following:
-# define the reset signal, load the target file, connect to target, and set
-# a breakpoint at main().
-gdb-config:
- @$(REMOVE) $(GDBINIT_FILE)
- @echo define reset >> $(GDBINIT_FILE)
- @echo SIGNAL SIGHUP >> $(GDBINIT_FILE)
- @echo end >> $(GDBINIT_FILE)
- @echo file $(TARGET).elf >> $(GDBINIT_FILE)
- @echo target remote $(DEBUG_HOST):$(DEBUG_PORT) >> $(GDBINIT_FILE)
-ifeq ($(DEBUG_BACKEND),simulavr)
- @echo load >> $(GDBINIT_FILE)
-endif
- @echo break main >> $(GDBINIT_FILE)
-
-debug: gdb-config $(TARGET).elf
-ifeq ($(DEBUG_BACKEND), avarice)
- @echo Starting AVaRICE - Press enter when "waiting to connect" message displays.
- @$(WINSHELL) /c start avarice --jtag $(JTAG_DEV) --erase --program --file \
- $(TARGET).elf $(DEBUG_HOST):$(DEBUG_PORT)
- @$(WINSHELL) /c pause
-
-else
- @$(WINSHELL) /c start simulavr --gdbserver --device $(MCU) --clock-freq \
- $(DEBUG_MFREQ) --port $(DEBUG_PORT)
-endif
- @$(WINSHELL) /c start avr-$(DEBUG_UI) --command=$(GDBINIT_FILE)
-
-
-
-
-# Convert ELF to COFF for use in debugging / simulating in AVR Studio or VMLAB.
-COFFCONVERT = $(OBJCOPY) --debugging
-COFFCONVERT += --change-section-address .data-0x800000
-COFFCONVERT += --change-section-address .bss-0x800000
-COFFCONVERT += --change-section-address .noinit-0x800000
-COFFCONVERT += --change-section-address .eeprom-0x810000
-
-
-
-coff: $(TARGET).elf
- @echo
- @echo $(MSG_COFF) $(TARGET).cof
- $(COFFCONVERT) -O coff-avr $< $(TARGET).cof
-
-
-extcoff: $(TARGET).elf
- @echo
- @echo $(MSG_EXTENDED_COFF) $(TARGET).cof
- $(COFFCONVERT) -O coff-ext-avr $< $(TARGET).cof
-
-
-
-# Create final output files (.hex, .eep) from ELF output file.
-%.hex: %.elf
- @echo
- @echo $(MSG_FLASH) $@
- $(OBJCOPY) -O $(FORMAT) -R .eeprom $< $@
-
-%.bin: %.elf
- @echo
- @echo $(MSG_FLASH) $@
- $(OBJCOPY) -O binary -R .eeprom $< $@
-
-%.eep: %.elf
- @echo
- @echo $(MSG_EEPROM) $@
- -$(OBJCOPY) -j .eeprom --set-section-flags=.eeprom="alloc,load" \
- --change-section-lma .eeprom=0 --no-change-warnings -O $(FORMAT) $< $@ || exit 0
-
-# Create extended listing file from ELF output file.
-%.lss: %.elf
- @echo
- @echo $(MSG_EXTENDED_LISTING) $@
- $(OBJDUMP) -h -S $< > $@
-
-# Create a symbol table from ELF output file.
-%.sym: %.elf
- @echo
- @echo $(MSG_SYMBOL_TABLE) $@
- $(NM) -n $< > $@
-
-
-
-# Create library from object files.
-.SECONDARY : $(TARGET).a
-.PRECIOUS : $(OBJ)
-%.a: $(OBJ)
- @echo
- @echo $(MSG_CREATING_LIBRARY) $@
- $(AR) $@ $(OBJ)
-
-
-# Link: create ELF output file from object files.
-.SECONDARY : $(TARGET).elf
-.PRECIOUS : $(OBJ)
-%.elf: $(OBJ)
- @echo
- @echo $(MSG_LINKING) $@
- $(CC) $(ALL_CFLAGS) $^ --output $@ $(LDFLAGS)
-
-
-# Compile: create object files from C source files.
-$(OBJDIR)/%.o : %.c
- @echo
- @echo $(MSG_COMPILING) $<
- $(CC) -c $(ALL_CFLAGS) $< -o $@
-
-
-# Compile: create object files from C++ source files.
-$(OBJDIR)/%.o : %.cpp
- @echo
- @echo $(MSG_COMPILING_CPP) $<
- $(CC) -c $(ALL_CPPFLAGS) $< -o $@
-
-
-# Compile: create assembler files from C source files.
-%.s : %.c
- $(CC) -S $(ALL_CFLAGS) $< -o $@
-
-
-# Compile: create assembler files from C++ source files.
-%.s : %.cpp
- $(CC) -S $(ALL_CPPFLAGS) $< -o $@
-
-
-# Assemble: create object files from assembler source files.
-$(OBJDIR)/%.o : %.S
- @echo
- @echo $(MSG_ASSEMBLING) $<
- $(CC) -c $(ALL_ASFLAGS) $< -o $@
-
-
-# Create preprocessed source for use in sending a bug report.
-%.i : %.c
- $(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@
-
-
-# Target: clean project.
-clean: begin clean_list end
-
-clean_list :
- @echo
- @echo $(MSG_CLEANING)
- $(REMOVE) $(TARGET).hex
- $(REMOVE) $(TARGET).bin
- $(REMOVE) $(TARGET).eep
- $(REMOVE) $(TARGET).cof
- $(REMOVE) $(TARGET).elf
- $(REMOVE) $(TARGET).map
- $(REMOVE) $(TARGET).sym
- $(REMOVE) $(TARGET).lss
- $(REMOVE) $(SRC:%.c=$(OBJDIR)/%.o)
- $(REMOVE) $(SRC:%.c=$(OBJDIR)/%.lst)
- $(REMOVE) $(SRC:.c=.s)
- $(REMOVE) $(SRC:.c=.d)
- $(REMOVE) $(SRC:.c=.i)
- $(REMOVEDIR) .dep
-
-
-# Create object files directory
-$(shell mkdir $(OBJDIR) 2>/dev/null)
-
-
-# Include the dependency files.
--include $(shell mkdir .dep 2>/dev/null) $(wildcard .dep/*)
-
-
-# Listing of phony targets.
-.PHONY : all begin finish end sizebefore sizeafter gccversion \
-build elf hex bin eep lss sym coff extcoff \
-clean clean_list program debug gdb-config
-
-
-
-
-
-
diff --git a/demos/AVR-ATmega128-GCC/chconf.h b/demos/AVR-ATmega128-GCC/chconf.h deleted file mode 100644 index 253eadaa5..000000000 --- a/demos/AVR-ATmega128-GCC/chconf.h +++ /dev/null @@ -1,531 +0,0 @@ -/*
- ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-
-/**
- * @file templates/chconf.h
- * @brief Configuration file template.
- * @details A copy of this file must be placed in each project directory, it
- * contains the application specific kernel settings.
- *
- * @addtogroup config
- * @details Kernel related settings and hooks.
- * @{
- */
-
-#ifndef _CHCONF_H_
-#define _CHCONF_H_
-
-/*===========================================================================*/
-/**
- * @name Kernel parameters and options
- * @{
- */
-/*===========================================================================*/
-
-/**
- * @brief System tick frequency.
- * @details Frequency of the system timer that drives the system ticks. This
- * setting also defines the system tick time unit.
- */
-#if !defined(CH_FREQUENCY) || defined(__DOXYGEN__)
-#define CH_FREQUENCY 1000
-#endif
-
-/**
- * @brief Round robin interval.
- * @details This constant is the number of system ticks allowed for the
- * threads before preemption occurs. Setting this value to zero
- * disables the preemption for threads with equal priority and the
- * round robin becomes cooperative. Note that higher priority
- * threads can still preempt, the kernel is always preemptive.
- *
- * @note Disabling the round robin preemption makes the kernel more compact
- * and generally faster.
- */
-#if !defined(CH_TIME_QUANTUM) || defined(__DOXYGEN__)
-#define CH_TIME_QUANTUM 20
-#endif
-
-/**
- * @brief Managed RAM size.
- * @details Size of the RAM area to be managed by the OS. If set to zero
- * then the whole available RAM is used. The core memory is made
- * available to the heap allocator and/or can be used directly through
- * the simplified core memory allocator.
- *
- * @note In order to let the OS manage the whole RAM the linker script must
- * provide the @p __heap_base__ and @p __heap_end__ symbols.
- * @note Requires @p CH_USE_MEMCORE.
- */
-#if !defined(CH_MEMCORE_SIZE) || defined(__DOXYGEN__)
-#define CH_MEMCORE_SIZE 128
-#endif
-
-/**
- * @brief Idle thread automatic spawn suppression.
- * @details When this option is activated the function @p chSysInit()
- * does not spawn the idle thread automatically. The application has
- * then the responsibility to do one of the following:
- * - Spawn a custom idle thread at priority @p IDLEPRIO.
- * - Change the main() thread priority to @p IDLEPRIO then enter
- * an endless loop. In this scenario the @p main() thread acts as
- * the idle thread.
- * .
- * @note Unless an idle thread is spawned the @p main() thread must not
- * enter a sleep state.
- */
-#if !defined(CH_NO_IDLE_THREAD) || defined(__DOXYGEN__)
-#define CH_NO_IDLE_THREAD FALSE
-#endif
-
-/** @} */
-
-/*===========================================================================*/
-/**
- * @name Performance options
- * @{
- */
-/*===========================================================================*/
-
-/**
- * @brief OS optimization.
- * @details If enabled then time efficient rather than space efficient code
- * is used when two possible implementations exist.
- *
- * @note This is not related to the compiler optimization options.
- * @note The default is @p TRUE.
- */
-#if !defined(CH_OPTIMIZE_SPEED) || defined(__DOXYGEN__)
-#define CH_OPTIMIZE_SPEED TRUE
-#endif
-
-/** @} */
-
-/*===========================================================================*/
-/**
- * @name Subsystem options
- * @{
- */
-/*===========================================================================*/
-
-/**
- * @brief Threads registry APIs.
- * @details If enabled then the registry APIs are included in the kernel.
- *
- * @note The default is @p TRUE.
- */
-#if !defined(CH_USE_REGISTRY) || defined(__DOXYGEN__)
-#define CH_USE_REGISTRY TRUE
-#endif
-
-/**
- * @brief Threads synchronization APIs.
- * @details If enabled then the @p chThdWait() function is included in
- * the kernel.
- *
- * @note The default is @p TRUE.
- */
-#if !defined(CH_USE_WAITEXIT) || defined(__DOXYGEN__)
-#define CH_USE_WAITEXIT TRUE
-#endif
-
-/**
- * @brief Semaphores APIs.
- * @details If enabled then the Semaphores APIs are included in the kernel.
- *
- * @note The default is @p TRUE.
- */
-#if !defined(CH_USE_SEMAPHORES) || defined(__DOXYGEN__)
-#define CH_USE_SEMAPHORES TRUE
-#endif
-
-/**
- * @brief Semaphores queuing mode.
- * @details If enabled then the threads are enqueued on semaphores by
- * priority rather than in FIFO order.
- *
- * @note The default is @p FALSE. Enable this if you have special requirements.
- * @note Requires @p CH_USE_SEMAPHORES.
- */
-#if !defined(CH_USE_SEMAPHORES_PRIORITY) || defined(__DOXYGEN__)
-#define CH_USE_SEMAPHORES_PRIORITY FALSE
-#endif
-
-/**
- * @brief Atomic semaphore API.
- * @details If enabled then the semaphores the @p chSemSignalWait() API
- * is included in the kernel.
- *
- * @note The default is @p TRUE.
- * @note Requires @p CH_USE_SEMAPHORES.
- */
-#if !defined(CH_USE_SEMSW) || defined(__DOXYGEN__)
-#define CH_USE_SEMSW TRUE
-#endif
-
-/**
- * @brief Mutexes APIs.
- * @details If enabled then the mutexes APIs are included in the kernel.
- *
- * @note The default is @p TRUE.
- */
-#if !defined(CH_USE_MUTEXES) || defined(__DOXYGEN__)
-#define CH_USE_MUTEXES TRUE
-#endif
-
-/**
- * @brief Conditional Variables APIs.
- * @details If enabled then the conditional variables APIs are included
- * in the kernel.
- *
- * @note The default is @p TRUE.
- * @note Requires @p CH_USE_MUTEXES.
- */
-#if !defined(CH_USE_CONDVARS) || defined(__DOXYGEN__)
-#define CH_USE_CONDVARS TRUE
-#endif
-
-/**
- * @brief Conditional Variables APIs with timeout.
- * @details If enabled then the conditional variables APIs with timeout
- * specification are included in the kernel.
- *
- * @note The default is @p TRUE.
- * @note Requires @p CH_USE_CONDVARS.
- */
-#if !defined(CH_USE_CONDVARS_TIMEOUT) || defined(__DOXYGEN__)
-#define CH_USE_CONDVARS_TIMEOUT TRUE
-#endif
-
-/**
- * @brief Events Flags APIs.
- * @details If enabled then the event flags APIs are included in the kernel.
- *
- * @note The default is @p TRUE.
- */
-#if !defined(CH_USE_EVENTS) || defined(__DOXYGEN__)
-#define CH_USE_EVENTS TRUE
-#endif
-
-/**
- * @brief Events Flags APIs with timeout.
- * @details If enabled then the events APIs with timeout specification
- * are included in the kernel.
- *
- * @note The default is @p TRUE.
- * @note Requires @p CH_USE_EVENTS.
- */
-#if !defined(CH_USE_EVENTS_TIMEOUT) || defined(__DOXYGEN__)
-#define CH_USE_EVENTS_TIMEOUT TRUE
-#endif
-
-/**
- * @brief Synchronous Messages APIs.
- * @details If enabled then the synchronous messages APIs are included
- * in the kernel.
- *
- * @note The default is @p TRUE.
- */
-#if !defined(CH_USE_MESSAGES) || defined(__DOXYGEN__)
-#define CH_USE_MESSAGES TRUE
-#endif
-
-/**
- * @brief Synchronous Messages queuing mode.
- * @details If enabled then messages are served by priority rather than in
- * FIFO order.
- *
- * @note The default is @p FALSE. Enable this if you have special requirements.
- * @note Requires @p CH_USE_MESSAGES.
- */
-#if !defined(CH_USE_MESSAGES_PRIORITY) || defined(__DOXYGEN__)
-#define CH_USE_MESSAGES_PRIORITY FALSE
-#endif
-
-/**
- * @brief Mailboxes APIs.
- * @details If enabled then the asynchronous messages (mailboxes) APIs are
- * included in the kernel.
- *
- * @note The default is @p TRUE.
- * @note Requires @p CH_USE_SEMAPHORES.
- */
-#if !defined(CH_USE_MAILBOXES) || defined(__DOXYGEN__)
-#define CH_USE_MAILBOXES TRUE
-#endif
-
-/**
- * @brief I/O Queues APIs.
- * @details If enabled then the I/O queues APIs are included in the kernel.
- *
- * @note The default is @p TRUE.
- */
-#if !defined(CH_USE_QUEUES) || defined(__DOXYGEN__)
-#define CH_USE_QUEUES TRUE
-#endif
-
-/**
- * @brief Core Memory Manager APIs.
- * @details If enabled then the core memory manager APIs are included
- * in the kernel.
- *
- * @note The default is @p TRUE.
- */
-#if !defined(CH_USE_MEMCORE) || defined(__DOXYGEN__)
-#define CH_USE_MEMCORE TRUE
-#endif
-
-/**
- * @brief Heap Allocator APIs.
- * @details If enabled then the memory heap allocator APIs are included
- * in the kernel.
- *
- * @note The default is @p TRUE.
- * @note Requires @p CH_USE_MEMCORE and either @p CH_USE_MUTEXES or
- * @p CH_USE_SEMAPHORES.
- * @note Mutexes are recommended.
- */
-#if !defined(CH_USE_HEAP) || defined(__DOXYGEN__)
-#define CH_USE_HEAP FALSE
-#endif
-
-/**
- * @brief C-runtime allocator.
- * @details If enabled the the heap allocator APIs just wrap the C-runtime
- * @p malloc() and @p free() functions.
- *
- * @note The default is @p FALSE.
- * @note Requires @p CH_USE_HEAP.
- * @note The C-runtime may or may not require @p CH_USE_MEMCORE, see the
- * appropriate documentation.
- */
-#if !defined(CH_USE_MALLOC_HEAP) || defined(__DOXYGEN__)
-#define CH_USE_MALLOC_HEAP FALSE
-#endif
-
-/**
- * @brief Memory Pools Allocator APIs.
- * @details If enabled then the memory pools allocator APIs are included
- * in the kernel.
- *
- * @note The default is @p TRUE.
- */
-#if !defined(CH_USE_MEMPOOLS) || defined(__DOXYGEN__)
-#define CH_USE_MEMPOOLS FALSE
-#endif
-
-/**
- * @brief Dynamic Threads APIs.
- * @details If enabled then the dynamic threads creation APIs are included
- * in the kernel.
- *
- * @note The default is @p TRUE.
- * @note Requires @p CH_USE_WAITEXIT.
- * @note Requires @p CH_USE_HEAP and/or @p CH_USE_MEMPOOLS.
- */
-#if !defined(CH_USE_DYNAMIC) || defined(__DOXYGEN__)
-#define CH_USE_DYNAMIC FALSE
-#endif
-
-/** @} */
-
-/*===========================================================================*/
-/**
- * @name Debug options
- * @{
- */
-/*===========================================================================*/
-
-/**
- * @brief Debug option, system state check.
- * @details If enabled the correct call protocol for system APIs is checked
- * at runtime.
- *
- * @note The default is @p FALSE.
- */
-#if !defined(CH_DBG_SYSTEM_STATE_CHECK) || defined(__DOXYGEN__)
-#define CH_DBG_SYSTEM_STATE_CHECK FALSE
-#endif
-
-/**
- * @brief Debug option, parameters checks.
- * @details If enabled then the checks on the API functions input
- * parameters are activated.
- *
- * @note The default is @p FALSE.
- */
-#if !defined(CH_DBG_ENABLE_CHECKS) || defined(__DOXYGEN__)
-#define CH_DBG_ENABLE_CHECKS FALSE
-#endif
-
-/**
- * @brief Debug option, consistency checks.
- * @details If enabled then all the assertions in the kernel code are
- * activated. This includes consistency checks inside the kernel,
- * runtime anomalies and port-defined checks.
- *
- * @note The default is @p FALSE.
- */
-#if !defined(CH_DBG_ENABLE_ASSERTS) || defined(__DOXYGEN__)
-#define CH_DBG_ENABLE_ASSERTS FALSE
-#endif
-
-/**
- * @brief Debug option, trace buffer.
- * @details If enabled then the context switch circular trace buffer is
- * activated.
- *
- * @note The default is @p FALSE.
- */
-#if !defined(CH_DBG_ENABLE_TRACE) || defined(__DOXYGEN__)
-#define CH_DBG_ENABLE_TRACE FALSE
-#endif
-
-/**
- * @brief Debug option, stack checks.
- * @details If enabled then a runtime stack check is performed.
- *
- * @note The default is @p FALSE.
- * @note The stack check is performed in a architecture/port dependent way.
- * It may not be implemented or some ports.
- * @note The default failure mode is to halt the system with the global
- * @p panic_msg variable set to @p NULL.
- */
-#if !defined(CH_DBG_ENABLE_STACK_CHECK) || defined(__DOXYGEN__)
-#define CH_DBG_ENABLE_STACK_CHECK FALSE
-#endif
-
-/**
- * @brief Debug option, stacks initialization.
- * @details If enabled then the threads working area is filled with a byte
- * value when a thread is created. This can be useful for the
- * runtime measurement of the used stack.
- *
- * @note The default is @p FALSE.
- */
-#if !defined(CH_DBG_FILL_THREADS) || defined(__DOXYGEN__)
-#define CH_DBG_FILL_THREADS FALSE
-#endif
-
-/**
- * @brief Debug option, threads profiling.
- * @details If enabled then a field is added to the @p Thread structure that
- * counts the system ticks occurred while executing the thread.
- *
- * @note The default is @p TRUE.
- * @note This debug option is defaulted to TRUE because it is required by
- * some test cases into the test suite.
- */
-#if !defined(CH_DBG_THREADS_PROFILING) || defined(__DOXYGEN__)
-#define CH_DBG_THREADS_PROFILING TRUE
-#endif
-
-/** @} */
-
-/*===========================================================================*/
-/**
- * @name Kernel hooks
- * @{
- */
-/*===========================================================================*/
-
-/**
- * @brief Threads descriptor structure extension.
- * @details User fields added to the end of the @p Thread structure.
- */
-#if !defined(THREAD_EXT_FIELDS) || defined(__DOXYGEN__)
-#define THREAD_EXT_FIELDS \
- /* Add threads custom fields here.*/
-#endif
-
-/**
- * @brief Threads initialization hook.
- * @details User initialization code added to the @p chThdInit() API.
- *
- * @note It is invoked from within @p chThdInit() and implicitly from all
- * the threads creation APIs.
- */
-#if !defined(THREAD_EXT_INIT_HOOK) || defined(__DOXYGEN__)
-#define THREAD_EXT_INIT_HOOK(tp) { \
- /* Add threads initialization code here.*/ \
-}
-#endif
-
-/**
- * @brief Threads finalization hook.
- * @details User finalization code added to the @p chThdExit() API.
- *
- * @note It is inserted into lock zone.
- * @note It is also invoked when the threads simply return in order to
- * terminate.
- */
-#if !defined(THREAD_EXT_EXIT_HOOK) || defined(__DOXYGEN__)
-#define THREAD_EXT_EXIT_HOOK(tp) { \
- /* Add threads finalization code here.*/ \
-}
-#endif
-
-/**
- * @brief Context switch hook.
- * @details This hook is invoked just before switching between threads.
- */
-#if !defined(THREAD_CONTEXT_SWITCH_HOOK) || defined(__DOXYGEN__)
-#define THREAD_CONTEXT_SWITCH_HOOK(ntp, otp) { \
- /* System halt code here.*/ \
-}
-#endif
-
-/**
- * @brief Idle Loop hook.
- * @details This hook is continuously invoked by the idle thread loop.
- */
-#if !defined(IDLE_LOOP_HOOK) || defined(__DOXYGEN__)
-#define IDLE_LOOP_HOOK() { \
- /* Idle loop code here.*/ \
-}
-#endif
-
-/**
- * @brief System tick event hook.
- * @details This hook is invoked in the system tick handler immediately
- * after processing the virtual timers queue.
- */
-#if !defined(SYSTEM_TICK_EVENT_HOOK) || defined(__DOXYGEN__)
-#define SYSTEM_TICK_EVENT_HOOK() { \
- /* System tick event code here.*/ \
-}
-#endif
-
-/**
- * @brief System halt hook.
- * @details This hook is invoked in case to a system halting error before
- * the system is halted.
- */
-#if !defined(SYSTEM_HALT_HOOK) || defined(__DOXYGEN__)
-#define SYSTEM_HALT_HOOK() { \
- /* System halt code here.*/ \
-}
-#endif
-
-/** @} */
-
-/*===========================================================================*/
-/* Port-specific settings (override port settings defaulted in chcore.h). */
-/*===========================================================================*/
-
-#endif /* _CHCONF_H_ */
-
-/** @} */
diff --git a/demos/AVR-ATmega128-GCC/halconf.h b/demos/AVR-ATmega128-GCC/halconf.h deleted file mode 100644 index 3858828e6..000000000 --- a/demos/AVR-ATmega128-GCC/halconf.h +++ /dev/null @@ -1,312 +0,0 @@ -/*
- ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-
-/**
- * @file templates/halconf.h
- * @brief HAL configuration header.
- * @details HAL configuration file, this file allows to enable or disable the
- * various device drivers from your application. You may also use
- * this file in order to override the device drivers default settings.
- *
- * @addtogroup HAL_CONF
- * @{
- */
-
-#ifndef _HALCONF_H_
-#define _HALCONF_H_
-
-#include "mcuconf.h"
-
-/**
- * @brief Enables the TM subsystem.
- */
-#if !defined(HAL_USE_TM) || defined(__DOXYGEN__)
-#define HAL_USE_TM FALSE
-#endif
-
-/**
- * @brief Enables the PAL subsystem.
- */
-#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__)
-#define HAL_USE_PAL TRUE
-#endif
-
-/**
- * @brief Enables the ADC subsystem.
- */
-#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__)
-#define HAL_USE_ADC FALSE
-#endif
-
-/**
- * @brief Enables the CAN subsystem.
- */
-#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__)
-#define HAL_USE_CAN FALSE
-#endif
-
-/**
- * @brief Enables the EXT subsystem.
- */
-#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__)
-#define HAL_USE_EXT FALSE
-#endif
-
-/**
- * @brief Enables the GPT subsystem.
- */
-#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__)
-#define HAL_USE_GPT FALSE
-#endif
-
-/**
- * @brief Enables the I2C subsystem.
- */
-#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__)
-#define HAL_USE_I2C FALSE
-#endif
-
-/**
- * @brief Enables the ICU subsystem.
- */
-#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__)
-#define HAL_USE_ICU FALSE
-#endif
-
-/**
- * @brief Enables the MAC subsystem.
- */
-#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__)
-#define HAL_USE_MAC FALSE
-#endif
-
-/**
- * @brief Enables the MMC_SPI subsystem.
- */
-#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__)
-#define HAL_USE_MMC_SPI FALSE
-#endif
-
-/**
- * @brief Enables the PWM subsystem.
- */
-#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__)
-#define HAL_USE_PWM FALSE
-#endif
-
-/**
- * @brief Enables the RTC subsystem.
- */
-#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__)
-#define HAL_USE_RTC FALSE
-#endif
-
-/**
- * @brief Enables the SDC subsystem.
- */
-#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__)
-#define HAL_USE_SDC FALSE
-#endif
-
-/**
- * @brief Enables the SERIAL subsystem.
- */
-#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__)
-#define HAL_USE_SERIAL TRUE
-#endif
-
-/**
- * @brief Enables the SERIAL over USB subsystem.
- */
-#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__)
-#define HAL_USE_SERIAL_USB FALSE
-#endif
-
-/**
- * @brief Enables the SPI subsystem.
- */
-#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__)
-#define HAL_USE_SPI FALSE
-#endif
-
-/**
- * @brief Enables the UART subsystem.
- */
-#if !defined(HAL_USE_UART) || defined(__DOXYGEN__)
-#define HAL_USE_UART FALSE
-#endif
-
-/**
- * @brief Enables the USB subsystem.
- */
-#if !defined(HAL_USE_USB) || defined(__DOXYGEN__)
-#define HAL_USE_USB FALSE
-#endif
-
-/*===========================================================================*/
-/* ADC driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Enables synchronous APIs.
- * @note Disabling this option saves both code and data space.
- */
-#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__)
-#define ADC_USE_WAIT TRUE
-#endif
-
-/**
- * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs.
- * @note Disabling this option saves both code and data space.
- */
-#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
-#define ADC_USE_MUTUAL_EXCLUSION TRUE
-#endif
-
-/*===========================================================================*/
-/* CAN driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Sleep mode related APIs inclusion switch.
- */
-#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__)
-#define CAN_USE_SLEEP_MODE TRUE
-#endif
-
-/*===========================================================================*/
-/* I2C driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Enables the mutual exclusion APIs on the I2C bus.
- */
-#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
-#define I2C_USE_MUTUAL_EXCLUSION TRUE
-#endif
-
-/*===========================================================================*/
-/* MAC driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Enables an event sources for incoming packets.
- */
-#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__)
-#define MAC_USE_ZERO_COPY FALSE
-#endif
-
-/**
- * @brief Enables an event sources for incoming packets.
- */
-#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__)
-#define MAC_USE_EVENTS TRUE
-#endif
-
-/*===========================================================================*/
-/* MMC_SPI driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Delays insertions.
- * @details If enabled this options inserts delays into the MMC waiting
- * routines releasing some extra CPU time for the threads with
- * lower priority, this may slow down the driver a bit however.
- * This option is recommended also if the SPI driver does not
- * use a DMA channel and heavily loads the CPU.
- */
-#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__)
-#define MMC_NICE_WAITING TRUE
-#endif
-
-/*===========================================================================*/
-/* SDC driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Number of initialization attempts before rejecting the card.
- * @note Attempts are performed at 10mS intervals.
- */
-#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__)
-#define SDC_INIT_RETRY 100
-#endif
-
-/**
- * @brief Include support for MMC cards.
- * @note MMC support is not yet implemented so this option must be kept
- * at @p FALSE.
- */
-#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__)
-#define SDC_MMC_SUPPORT FALSE
-#endif
-
-/**
- * @brief Delays insertions.
- * @details If enabled this options inserts delays into the MMC waiting
- * routines releasing some extra CPU time for the threads with
- * lower priority, this may slow down the driver a bit however.
- */
-#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__)
-#define SDC_NICE_WAITING TRUE
-#endif
-
-/*===========================================================================*/
-/* SERIAL driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Default bit rate.
- * @details Configuration parameter, this is the baud rate selected for the
- * default configuration.
- */
-#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__)
-#define SERIAL_DEFAULT_BITRATE 38400
-#endif
-
-/**
- * @brief Serial buffers size.
- * @details Configuration parameter, you can change the depth of the queue
- * buffers depending on the requirements of your application.
- * @note The default is 64 bytes for both the transmission and receive
- * buffers.
- */
-#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__)
-#define SERIAL_BUFFERS_SIZE 16
-#endif
-
-/*===========================================================================*/
-/* SPI driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Enables synchronous APIs.
- * @note Disabling this option saves both code and data space.
- */
-#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__)
-#define SPI_USE_WAIT TRUE
-#endif
-
-/**
- * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs.
- * @note Disabling this option saves both code and data space.
- */
-#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
-#define SPI_USE_MUTUAL_EXCLUSION TRUE
-#endif
-
-#endif /* _HALCONF_H_ */
-
-/** @} */
diff --git a/demos/AVR-ATmega128-GCC/lcd.c b/demos/AVR-ATmega128-GCC/lcd.c deleted file mode 100644 index d0415b83f..000000000 --- a/demos/AVR-ATmega128-GCC/lcd.c +++ /dev/null @@ -1,97 +0,0 @@ -/*
- ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-
-#include "ch.h"
-#include "hal.h"
-#include "lcd.h"
-
-static void e_pulse(void) {
- volatile uint8_t i;
-
- PORTC |= PORTC_44780_E_MASK;
- for (i = 0; i < ELOOPVALUE; i++);
- ;
- PORTC &= ~PORTC_44780_E_MASK;
-}
-
-static void wait_not_busy(void) {
-
- chThdSleep(2);
-}
-
-/*
- * 44780 soft reset procedure.
- */
-void lcdInit(void) {
-
- PORTC = (PORTC & ~(PORTC_44780_DATA_MASK | PORTC_44780_RS_MASK |
- PORTC_44780_E_MASK | PORTC_44780_RW_MASK)) |
- (LCD_CMD_INIT8 & PORTC_44780_DATA_MASK);
- chThdSleep(50);
- e_pulse();
- chThdSleep(10);
- e_pulse();
- chThdSleep(2);
- e_pulse();
- wait_not_busy();
- PORTC = (PORTC & ~(PORTC_44780_DATA_MASK | PORTC_44780_RS_MASK |
- PORTC_44780_E_MASK | PORTC_44780_RW_MASK)) |
- (LCD_CMD_INIT4 & PORTC_44780_DATA_MASK);
- e_pulse();
- lcdCmd(LCD_CMD_INIT4);
- lcdCmd(LCD_SET_DM | LCD_DM_DISPLAY_ON);
- lcdCmd(LCD_SET_INCREMENT_MODE);
-}
-
-/*
- * Sends a command byte to the 44780.
- */
-void lcdCmd(uint8_t cmd) {
-
- wait_not_busy();
- PORTC = (PORTC | PORTC_44780_DATA_MASK) & (cmd |
- (0x0F & ~PORTC_44780_RS_MASK));
- e_pulse();
- PORTC = (PORTC | PORTC_44780_DATA_MASK) & ((cmd << 4) |
- (0x0F & ~PORTC_44780_RS_MASK));
- e_pulse();
-}
-
-/*
- * Writes a char on the LCD at the current position.
- */
-void lcdPutc(char c) {
- uint8_t b;
-
- wait_not_busy();
- b = c | 0x0F;
- PORTC = (PORTC | PORTC_44780_DATA_MASK | PORTC_44780_RS_MASK) &
- (c | 0x0F);
- e_pulse();
- PORTC = (PORTC | PORTC_44780_DATA_MASK | PORTC_44780_RS_MASK) &
- ((c << 4) | 0x0F);
- e_pulse();
-}
-
-/*
- * Writes a string on the LCD at an absolute address.
- */
-void lcdPuts(uint8_t pos, char *p) {
-
- lcdCmd(LCD_SET_DDRAM_ADDRESS | pos);
- while (*p)
- lcdPutc(*p++);
-}
diff --git a/demos/AVR-ATmega128-GCC/lcd.h b/demos/AVR-ATmega128-GCC/lcd.h deleted file mode 100644 index c86d90dc1..000000000 --- a/demos/AVR-ATmega128-GCC/lcd.h +++ /dev/null @@ -1,49 +0,0 @@ -/*
- ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-
-#ifndef _LCD_H_
-#define _LCD_H_
-
-#define ELOOPVALUE 10
-
-#define LCD_CLEAR 0x01
-
-#define LCD_RETURN_HOME 0x02
-
-#define LCD_SET_INCREMENT_MODE 0x06
-
-#define LCD_SET_DM 0x08
-#define LCD_DM_DISPLAY_ON 4
-#define LCD_DM_DISPLAY_OFF 0
-#define LCD_DM_CURSOR_ON 2
-#define LCD_DM_CURSOR_OFF 0
-#define LCD_DM_BLINK_ON 1
-#define LCD_DM_BLINK_OFF 0
-
-#define LCD_CMD_INIT4 0x28
-#define LCD_CMD_INIT8 0x38
-
-#define LCD_SET_DDRAM_ADDRESS 0x80
-
-#define LCD_LINE1 0
-#define LCD_LINE2 40
-
-void lcdInit(void);
-void lcdCmd(uint8_t cmd);
-void lcdPutc(char c);
-void lcdPuts(uint8_t pos, char *p);
-
-#endif /* _LCD_H_ */
diff --git a/demos/AVR-ATmega128-GCC/main.c b/demos/AVR-ATmega128-GCC/main.c deleted file mode 100644 index 756e7fe6a..000000000 --- a/demos/AVR-ATmega128-GCC/main.c +++ /dev/null @@ -1,73 +0,0 @@ -/*
- ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-
-#include "ch.h"
-#include "hal.h"
-#include "test.h"
-
-#include "lcd.h"
-
-static WORKING_AREA(waThread1, 32);
-static msg_t Thread1(void *arg) {
-
- while (TRUE) {
- if (!palReadPad(IOPORT1, PORTA_BUTTON2))
- palTogglePad(IOPORT1, PORTA_RELAY);
- chThdSleepMilliseconds(1000);
- }
- return 0;
-}
-
-/*
- * Application entry point.
- */
-int main(void) {
-
- /*
- * System initializations.
- * - HAL initialization, this also initializes the configured device drivers
- * and performs the board-specific initializations.
- * - Kernel initialization, the main() function becomes a thread and the
- * RTOS is active.
- */
- halInit();
- chSysInit();
-
- /*
- * Activates the serial driver 2 using the driver default configuration.
- */
- sdStart(&SD2, NULL);
-
- /*
- * This initialization requires the OS already active because it uses delay
- * APIs inside.
- */
- lcdInit();
- lcdCmd(LCD_CLEAR);
- lcdPuts(LCD_LINE1, " ChibiOS/RT ");
- lcdPuts(LCD_LINE2, " Hello World! ");
-
- /*
- * Starts the LED blinker thread.
- */
- chThdCreateStatic(waThread1, sizeof(waThread1), NORMALPRIO, Thread1, NULL);
-
- while(TRUE) {
- if (!palReadPad(IOPORT1, PORTA_BUTTON1))
- TestThread(&SD2);
- chThdSleepMilliseconds(500);
- }
-}
diff --git a/demos/AVR-ATmega128-GCC/mcuconf.h b/demos/AVR-ATmega128-GCC/mcuconf.h deleted file mode 100644 index d3c05d25b..000000000 --- a/demos/AVR-ATmega128-GCC/mcuconf.h +++ /dev/null @@ -1,49 +0,0 @@ -/*
- ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-
-/*
- * AVR drivers configuration.
- * The following settings override the default settings present in
- * the various device driver implementation headers.
- * Note that the settings for each driver only have effect if the driver
- * is enabled in halconf.h.
- */
-
-/*
- * ADC driver system settings.
- */
-
-/*
- * CAN driver system settings.
- */
-
-/*
- * MAC driver system settings.
- */
-
-/*
- * PWM driver system settings.
- */
-
-/*
- * SERIAL driver system settings.
- */
-#define USE_AVR_USART0 FALSE
-#define USE_AVR_USART1 TRUE
-
-/*
- * SPI driver system settings.
- */
diff --git a/demos/AVR-ATmega128-GCC/readme.txt b/demos/AVR-ATmega128-GCC/readme.txt deleted file mode 100644 index 7158463fb..000000000 --- a/demos/AVR-ATmega128-GCC/readme.txt +++ /dev/null @@ -1,24 +0,0 @@ -*****************************************************************************
-** ChibiOS/RT port for Atmel AVR ATmega128. **
-*****************************************************************************
-
-** TARGET **
-
-The demo runs on an Olimex AVR-MT-128 board.
-
-** The Demo **
-
-The demo currently just writes a hello world on the LCD and toggles the relay
-using a thread while button 2 is pressed.
-By pressing the button 1 the test suite is activated, output on serial port 2.
-
-** Build Procedure **
-
-The demo was built using the WinAVR toolchain.
-
-** Notes **
-
-The demo requires include files from WinAVR that are not part of the ChibiOS/RT
-distribution, please install WinAVR.
-
- http://winavr.sourceforge.net/
|