aboutsummaryrefslogtreecommitdiffstats
path: root/boards/ST_STM3210C_EVAL
diff options
context:
space:
mode:
Diffstat (limited to 'boards/ST_STM3210C_EVAL')
-rw-r--r--boards/ST_STM3210C_EVAL/board.c55
-rw-r--r--boards/ST_STM3210C_EVAL/board.h128
-rw-r--r--boards/ST_STM3210C_EVAL/board.mk5
3 files changed, 0 insertions, 188 deletions
diff --git a/boards/ST_STM3210C_EVAL/board.c b/boards/ST_STM3210C_EVAL/board.c
deleted file mode 100644
index 030d2f9ae..000000000
--- a/boards/ST_STM3210C_EVAL/board.c
+++ /dev/null
@@ -1,55 +0,0 @@
-/*
- ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-
-#include "ch.h"
-#include "hal.h"
-
-/**
- * @brief PAL setup.
- * @details Digital I/O ports static configuration as defined in @p board.h.
- * This variable is used by the HAL when initializing the PAL driver.
- */
-#if HAL_USE_PAL || defined(__DOXYGEN__)
-const PALConfig pal_default_config =
-{
- {VAL_GPIOAODR, VAL_GPIOACRL, VAL_GPIOACRH},
- {VAL_GPIOBODR, VAL_GPIOBCRL, VAL_GPIOBCRH},
- {VAL_GPIOCODR, VAL_GPIOCCRL, VAL_GPIOCCRH},
- {VAL_GPIODODR, VAL_GPIODCRL, VAL_GPIODCRH},
- {VAL_GPIOEODR, VAL_GPIOECRL, VAL_GPIOECRH},
-};
-#endif
-
-/*
- * Early initialization code.
- * This initialization must be performed just after stack setup and before
- * any other initialization.
- */
-void __early_init(void) {
-
- stm32_clock_init();
-}
-
-/*
- * Board-specific initialization code.
- */
-void boardInit(void) {
-
- /*
- * Remap USART2 to the PD5/PD6 pins.
- */
- AFIO->MAPR |= AFIO_MAPR_USART2_REMAP;
-}
diff --git a/boards/ST_STM3210C_EVAL/board.h b/boards/ST_STM3210C_EVAL/board.h
deleted file mode 100644
index 2193179b8..000000000
--- a/boards/ST_STM3210C_EVAL/board.h
+++ /dev/null
@@ -1,128 +0,0 @@
-/*
- ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-
-#ifndef _BOARD_H_
-#define _BOARD_H_
-
-/*
- * Setup for the STMicroelectronics STM3210C-EVAL evaluation board.
- */
-
-#define GPIOD_LED1 7
-#define GPIOD_LED2 13
-#define GPIOD_LED3 3
-#define GPIOD_LED4 4
-
-/*
- * Board identifier.
- */
-#define BOARD_ST_STM3210C_EVAL
-#define BOARD_NAME "ST STM3210C-EVAL"
-
-/*
- * Board frequencies.
- */
-#define STM32_LSECLK 32768
-#define STM32_HSECLK 25000000
-
-/*
- * MCU type, supported types are defined in ./os/hal/platforms/hal_lld.h.
- */
-#define STM32F10X_CL
-
-/*
- * IO pins assignments.
- * *********************TO BE COMPLETED*********************
- */
-
-/*
- * I/O ports initial setup, this configuration is established soon after reset
- * in the initialization code.
- *
- * The digits have the following meaning:
- * 0 - Analog input.
- * 1 - Push Pull output 10MHz.
- * 2 - Push Pull output 2MHz.
- * 3 - Push Pull output 50MHz.
- * 4 - Digital input.
- * 5 - Open Drain output 10MHz.
- * 6 - Open Drain output 2MHz.
- * 7 - Open Drain output 50MHz.
- * 8 - Digital input with PullUp or PullDown resistor depending on ODR.
- * 9 - Alternate Push Pull output 10MHz.
- * A - Alternate Push Pull output 2MHz.
- * B - Alternate Push Pull output 50MHz.
- * C - Reserved.
- * D - Alternate Open Drain output 10MHz.
- * E - Alternate Open Drain output 2MHz.
- * F - Alternate Open Drain output 50MHz.
- * Please refer to the STM32 Reference Manual for details.
- */
-
-/*
- * Port A setup.
- * Everything input except:
- */
-#define VAL_GPIOACRL 0x44444444 /* PA7...PA0 */
-#define VAL_GPIOACRH 0x44444444 /* PA15...PA8 */
-#define VAL_GPIOAODR 0xFFFFFFFF
-
-/*
- * Port B setup.
- * Everything input except:
- */
-#define VAL_GPIOBCRL 0x44444444 /* PB7...PB0 */
-#define VAL_GPIOBCRH 0x44444444 /* PB15...PB8 */
-#define VAL_GPIOBODR 0xFFFFFFFF
-
-/*
- * Port C setup.
- * Everything input except:
- */
-#define VAL_GPIOCCRL 0x44444444 /* PC7...PC0 */
-#define VAL_GPIOCCRH 0x44444444 /* PC15...PC8 */
-#define VAL_GPIOCODR 0xFFFFFFFF
-
-/*
- * Port D setup.
- * Everything input except:
- * PD5 - USART2TX (remapped) AF PP Output
- * PD6 - USART2RX (remapped) Digital Input
- * PD7 - LED (LD1) PP Output
- */
-#define VAL_GPIODCRL 0x34B33444 /* PD7...PD0 */
-#define VAL_GPIODCRH 0x44344444 /* PD15...PD8 */
-#define VAL_GPIODODR 0x0000DF67
-
-/*
- * Port E setup.
- * Everything input except:
- */
-#define VAL_GPIOECRL 0x44444444 /* PE7...PE0 */
-#define VAL_GPIOECRH 0x44344444 /* PE15...PE8 */
-#define VAL_GPIOEODR 0xFFFFFFFF
-
-#if !defined(_FROM_ASM_)
-#ifdef __cplusplus
-extern "C" {
-#endif
- void boardInit(void);
-#ifdef __cplusplus
-}
-#endif
-#endif /* _FROM_ASM_ */
-
-#endif /* _BOARD_H_ */
diff --git a/boards/ST_STM3210C_EVAL/board.mk b/boards/ST_STM3210C_EVAL/board.mk
deleted file mode 100644
index eaa17162b..000000000
--- a/boards/ST_STM3210C_EVAL/board.mk
+++ /dev/null
@@ -1,5 +0,0 @@
-# List of all the board related files.
-BOARDSRC = ${CHIBIOS}/boards/ST_STM3210C_EVAL/board.c
-
-# Required include directories
-BOARDINC = ${CHIBIOS}/boards/ST_STM3210C_EVAL
generated by cgit v1.2.3 (git 2.25.1) at 2025-11-04 03:52:59 +0000