diff options
Diffstat (limited to 'boards/OLIMEX_STM32_P407')
| -rw-r--r-- | boards/OLIMEX_STM32_P407/board.c | 78 | ||||
| -rw-r--r-- | boards/OLIMEX_STM32_P407/board.h | 651 | ||||
| -rw-r--r-- | boards/OLIMEX_STM32_P407/board.mk | 5 |
3 files changed, 734 insertions, 0 deletions
diff --git a/boards/OLIMEX_STM32_P407/board.c b/boards/OLIMEX_STM32_P407/board.c new file mode 100644 index 000000000..17ef1d54f --- /dev/null +++ b/boards/OLIMEX_STM32_P407/board.c @@ -0,0 +1,78 @@ +/*
+ ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+#include "ch.h"
+#include "hal.h"
+
+/**
+ * @brief PAL setup.
+ * @details Digital I/O ports static configuration as defined in @p board.h.
+ * This variable is used by the HAL when initializing the PAL driver.
+ */
+#if HAL_USE_PAL || defined(__DOXYGEN__)
+const PALConfig pal_default_config =
+{
+ {VAL_GPIOA_MODER, VAL_GPIOA_OTYPER, VAL_GPIOA_OSPEEDR, VAL_GPIOA_PUPDR, VAL_GPIOA_ODR, VAL_GPIOA_AFRL, VAL_GPIOA_AFRH},
+ {VAL_GPIOB_MODER, VAL_GPIOB_OTYPER, VAL_GPIOB_OSPEEDR, VAL_GPIOB_PUPDR, VAL_GPIOB_ODR, VAL_GPIOB_AFRL, VAL_GPIOB_AFRH},
+ {VAL_GPIOC_MODER, VAL_GPIOC_OTYPER, VAL_GPIOC_OSPEEDR, VAL_GPIOC_PUPDR, VAL_GPIOC_ODR, VAL_GPIOC_AFRL, VAL_GPIOC_AFRH},
+ {VAL_GPIOD_MODER, VAL_GPIOD_OTYPER, VAL_GPIOD_OSPEEDR, VAL_GPIOD_PUPDR, VAL_GPIOD_ODR, VAL_GPIOD_AFRL, VAL_GPIOD_AFRH},
+ {VAL_GPIOE_MODER, VAL_GPIOE_OTYPER, VAL_GPIOE_OSPEEDR, VAL_GPIOE_PUPDR, VAL_GPIOE_ODR, VAL_GPIOE_AFRL, VAL_GPIOE_AFRH},
+ {VAL_GPIOF_MODER, VAL_GPIOF_OTYPER, VAL_GPIOF_OSPEEDR, VAL_GPIOF_PUPDR, VAL_GPIOF_ODR, VAL_GPIOF_AFRL, VAL_GPIOF_AFRH},
+ {VAL_GPIOG_MODER, VAL_GPIOG_OTYPER, VAL_GPIOG_OSPEEDR, VAL_GPIOG_PUPDR, VAL_GPIOG_ODR, VAL_GPIOG_AFRL, VAL_GPIOG_AFRH},
+ {VAL_GPIOH_MODER, VAL_GPIOH_OTYPER, VAL_GPIOH_OSPEEDR, VAL_GPIOH_PUPDR, VAL_GPIOH_ODR, VAL_GPIOH_AFRL, VAL_GPIOH_AFRH},
+ {VAL_GPIOI_MODER, VAL_GPIOI_OTYPER, VAL_GPIOI_OSPEEDR, VAL_GPIOI_PUPDR, VAL_GPIOI_ODR, VAL_GPIOI_AFRL, VAL_GPIOI_AFRH}
+};
+#endif
+
+/*
+ * Early initialization code.
+ * This initialization must be performed just after stack setup and before
+ * any other initialization.
+ */
+void __early_init(void) {
+
+ stm32_clock_init();
+}
+
+#if HAL_USE_MMC_SPI || defined(__DOXYGEN__)
+/**
+ * @brief MMC_SPI card detection.
+ */
+bool_t mmc_lld_is_card_inserted(MMCDriver *mmcp) {
+ static bool_t last_status = FALSE;
+ (void)mmcp;
+
+ if ((palReadLatch(GPIOD) & PAL_PORT_BIT(GPIOD_SPI3_CS)) == 0)
+ return last_status;
+ return last_status = (bool_t)palReadPad(GPIOD, GPIOD_SPI3_CS);
+}
+
+/**
+ * @brief MMC_SPI card write protection detection.
+ */
+bool_t mmc_lld_is_write_protected(MMCDriver *mmcp) {
+
+ (void)mmcp;
+ /* TODO: Fill the implementation.*/
+ return FALSE;
+}
+#endif
+
+/*
+ * Board-specific initialization code.
+ */
+void boardInit(void) {
+}
diff --git a/boards/OLIMEX_STM32_P407/board.h b/boards/OLIMEX_STM32_P407/board.h new file mode 100644 index 000000000..66279a8f9 --- /dev/null +++ b/boards/OLIMEX_STM32_P407/board.h @@ -0,0 +1,651 @@ +/*
+ ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+#ifndef _BOARD_H_
+#define _BOARD_H_
+
+/*
+ * Setup for Olimex STM32-P407 board.
+ * NOTE: Part of JTAG signals are used for other functions, this board can be
+ * used using SWD only.
+ */
+
+/*
+ * Board identifier.
+ */
+#define BOARD_OLIMEX_STM32_P407
+#define BOARD_NAME "Olimex STM32-P407"
+
+/*
+ * Ethernet PHY type.
+ */
+#define BOARD_PHY_ID MII_KS8721_ID
+#define BOARD_PHY_RMII
+
+/*
+ * Board frequencies.
+ * NOTE: The LSE crystal is not fitted by default on the board.
+ */
+#define STM32_LSECLK 32768
+#define STM32_HSECLK 25000000
+
+/*
+ * Board voltages.
+ * Required for performance limits calculation.
+ */
+#define STM32_VDD 330
+
+/*
+ * MCU type as defined in the ST header file stm32f4xx.h.
+ */
+#define STM32F4XX
+
+/*
+ * IO pins assignments.
+ */
+#define GPIOA_BUTTON_WKUP 0
+#define GPIOA_ETH_RMII_REF_CLK 1
+#define GPIOA_ETH_RMII_MDIO 2
+#define GPIOA_ETH_RMII_MDINT 3
+#define GPIOA_DCMI_HSYNC 4
+#define GPIOA_LCD_SCK 5
+#define GPIOA_DCMI_PIXCLK 6
+#define GPIOA_ETH_RMII_CRS_DV 7
+#define GPIOA_MCO1 8
+#define GPIOA_OTG_FS_VBUS 9
+#define GPIOA_DCMI_D1 10
+#define GPIOA_OTG_FS_DM 11
+#define GPIOA_OTG_FS_DP 12
+#define GPIOA_SWDIO 13
+#define GPIOA_SWCLK 14
+#define GPIOA_I2S3_WS 15
+
+#define GPIOB_LCD_BL 0
+#define GPIOB_BUZ 1
+#define GPIOB_CAM_ENB 2
+#define GPIOB_I2S3_CK 3
+#define GPIOB_LCD_MISO 4
+#define GPIOB_I2S3_SD 5
+#define GPIOB_DCMI_D5 6
+#define GPIOB_DCMI_VSYNC 7
+#define GPIOB_CAN1_RX 8
+#define GPIOB_CAN1_TX 9
+#define GPIOB_USB_FS_FAULT 10
+#define GPIOB_ETH_RMII_TX_EN 11
+#define GPIOB_OTG_HS_ID 12
+#define GPIOB_OTG_HS_VBUS 13
+#define GPIOB_OTG_HS_DM 14
+#define GPIOB_OTG_HS_DP 15
+
+#define GPIOC_TRIM 0
+#define GPIOC_ETH_RMII_MDC 1
+#define GPIOC_USB_FS_VBUSON 2
+#define GPIOC_LCD_MOSI 3
+#define GPIOC_ETH_RMII_RXD0 4
+#define GPIOC_ETH_RMII_RXD1 5
+#define GPIOC_DCMI_D0_US6_TX 6
+#define GPIOC_I2S3_MCK 7
+#define GPIOC_DCMI_D2 8
+#define GPIOC_DCMI_D3 9
+#define GPIOC_SPI3_SCK 10
+#define GPIOC_SPI3_MISO 11
+#define GPIOC_SPI3_MOSI 12
+#define GPIOC_SWITCH_TAMPER 13
+#define GPIOC_OSC32_IN 14
+#define GPIOC_OSC32_OUT 15
+
+#define GPIOD_USELESS0 0
+#define GPIOD_USELESS1 1
+#define GPIOD_SPI3_CS 2
+#define GPIOD_LCD_RST 3
+#define GPIOD_USELESS4 4
+#define GPIOD_USELESS5 5
+#define GPIOD_LCD_CS 6
+#define GPIOD_USELESS7 7
+#define GPIOD_USART3_TX 8
+#define GPIOD_USART3_RX 9
+#define GPIOD_USELESS10 10
+#define GPIOD_USART3_CTS 11
+#define GPIOD_USART3_RTS 12
+#define GPIOD_USB_HS_FAULT 13
+#define GPIOD_USELESS14 14
+#define GPIOD_USELESS15 15
+
+#define GPIOE_0 0
+#define GPIOE_1 1
+#define GPIOE_TEMP_ALERT 2
+#define GPIOE_USB_HS_VBUSON 3
+#define GPIOE_4 4
+#define GPIOE_5 5
+#define GPIOE_6 6
+#define GPIOE_7 7
+#define GPIOE_8 8
+#define GPIOE_9 9
+#define GPIOE_10 10
+#define GPIOE_11 11
+#define GPIOE_12 12
+#define GPIOE_13 13
+#define GPIOE_14 14
+#define GPIOE_15 15
+
+#define GPIOF_0 0
+#define GPIOF_1 1
+#define GPIOF_2 2
+#define GPIOF_3 3
+#define GPIOF_4 4
+#define GPIOF_5 5
+#define GPIOF_STAT1 6
+#define GPIOF_STAT2 7
+#define GPIOF_STAT3 8
+#define GPIOF_CAM_PWR 9
+#define GPIOF_10 10
+#define GPIOF_CAM_RS 11
+#define GPIOF_12 12
+#define GPIOF_13 13
+#define GPIOF_14 14
+#define GPIOF_15 15
+
+#define GPIOG_0 0
+#define GPIOG_1 1
+#define GPIOG_2 2
+#define GPIOG_3 3
+#define GPIOG_4 4
+#define GPIOG_5 5
+#define GPIOG_RIGHT 6
+#define GPIOG_UP 7
+#define GPIOG_DOWN 8
+#define GPIOG_USART6_RX 9
+#define GPIOG_10 10
+#define GPIOG_LEFT 11
+#define GPIOG_12 12
+#define GPIOG_ETH_RMII_TXD0 13
+#define GPIOG_ETH_RMII_TXD1 14
+#define GPIOG_CENT 15
+
+#define GPIOH_OSC_IN 0
+#define GPIOH_OSC_OUT 1
+
+/*
+ * I/O ports initial setup, this configuration is established soon after reset
+ * in the initialization code.
+ * Please refer to the STM32 Reference Manual for details.
+ */
+#define PIN_MODE_INPUT(n) (0U << ((n) * 2))
+#define PIN_MODE_OUTPUT(n) (1U << ((n) * 2))
+#define PIN_MODE_ALTERNATE(n) (2U << ((n) * 2))
+#define PIN_MODE_ANALOG(n) (3U << ((n) * 2))
+#define PIN_OTYPE_PUSHPULL(n) (0U << (n))
+#define PIN_OTYPE_OPENDRAIN(n) (1U << (n))
+#define PIN_OSPEED_2M(n) (0U << ((n) * 2))
+#define PIN_OSPEED_25M(n) (1U << ((n) * 2))
+#define PIN_OSPEED_50M(n) (2U << ((n) * 2))
+#define PIN_OSPEED_100M(n) (3U << ((n) * 2))
+#define PIN_PUDR_FLOATING(n) (0U << ((n) * 2))
+#define PIN_PUDR_PULLUP(n) (1U << ((n) * 2))
+#define PIN_PUDR_PULLDOWN(n) (2U << ((n) * 2))
+#define PIN_AFIO_AF(n, v) ((v##U) << ((n % 8) * 4))
+
+/*
+ * Port A setup.
+ *
+ * PA0 - GPIOA_BUTTON_WKUP (input floating).
+ * PA1 - GPIOA_ETH_RMII_REF_CLK(alternate 11).
+ * PA2 - GPIOA_ETH_RMII_MDIO (alternate 11).
+ * PA3 - GPIOA_ETH_RMII_MDINT (input floating).
+ * PA4 - GPIOA_DCMI_HSYNC (input pull-up).
+ * PA5 - GPIOA_LCD_SCK (output push-pull).
+ * PA6 - GPIOA_DCMI_PIXCLK (input pull-up).
+ * PA7 - GPIOA_ETH_RMII_CRS_DV (alternate 11).
+ * PA8 - GPIOA_MCO1 (alternate 0).
+ * PA9 - GPIOA_OTG_FS_VBUS (input pull-up).
+ * PA10 - GPIOA_DCMI_D1 (input pull-up).
+ * PA11 - GPIOA_OTG_FS_DM (alternate 10).
+ * PA12 - GPIOA_OTG_FS_DP (alternate 10).
+ * PA13 - GPIOA_SWDIO (alternate 0).
+ * PA14 - GPIOA_SWCLK (alternate 0, pull-down).
+ * PA15 - GPIOA_I2S3_WS (alternate 6).
+ */
+#define VAL_GPIOA_MODER (PIN_MODE_INPUT(GPIOA_BUTTON_WKUP) | \
+ PIN_MODE_ALTERNATE(GPIOA_ETH_RMII_REF_CLK) | \
+ PIN_MODE_ALTERNATE(GPIOA_ETH_RMII_MDIO) | \
+ PIN_MODE_INPUT(GPIOA_ETH_RMII_MDINT) | \
+ PIN_MODE_INPUT(GPIOA_DCMI_HSYNC) | \
+ PIN_MODE_OUTPUT(GPIOA_LCD_SCK) | \
+ PIN_MODE_INPUT(GPIOA_DCMI_PIXCLK) | \
+ PIN_MODE_ALTERNATE(GPIOA_ETH_RMII_CRS_DV) | \
+ PIN_MODE_ALTERNATE(GPIOA_MCO1) | \
+ PIN_MODE_INPUT(GPIOA_OTG_FS_VBUS) | \
+ PIN_MODE_INPUT(GPIOA_DCMI_D1) | \
+ PIN_MODE_ALTERNATE(GPIOA_OTG_FS_DM) | \
+ PIN_MODE_ALTERNATE(GPIOA_OTG_FS_DP) | \
+ PIN_MODE_ALTERNATE(GPIOA_SWDIO) | \
+ PIN_MODE_ALTERNATE(GPIOA_SWCLK) | \
+ PIN_MODE_ALTERNATE(GPIOA_I2S3_WS))
+#define VAL_GPIOA_OTYPER 0x00000000
+#define VAL_GPIOA_OSPEEDR 0xFFFFFFFF
+#define VAL_GPIOA_PUPDR (PIN_PUDR_PULLUP(GPIOA_DCMI_HSYNC) | \
+ PIN_PUDR_PULLUP(GPIOA_DCMI_PIXCLK) | \
+ PIN_PUDR_PULLDOWN(GPIOA_OTG_FS_VBUS) | \
+ PIN_PUDR_PULLUP(GPIOA_DCMI_D1) | \
+ PIN_PUDR_PULLDOWN(GPIOA_SWCLK))
+#define VAL_GPIOA_ODR 0xFFFFFFDF
+#define VAL_GPIOA_AFRL (PIN_AFIO_AF(GPIOA_ETH_RMII_REF_CLK, 11) | \
+ PIN_AFIO_AF(GPIOA_ETH_RMII_MDIO, 11) | \
+ PIN_AFIO_AF(GPIOA_ETH_RMII_CRS_DV, 11))
+#define VAL_GPIOA_AFRH (PIN_AFIO_AF(GPIOA_MCO1, 0) | \
+ PIN_AFIO_AF(GPIOA_OTG_FS_DM, 10) | \
+ PIN_AFIO_AF(GPIOA_OTG_FS_DP, 10) | \
+ PIN_AFIO_AF(GPIOA_SWDIO, 0) | \
+ PIN_AFIO_AF(GPIOA_SWCLK, 0) | \
+ PIN_AFIO_AF(GPIOA_I2S3_WS, 6))
+
+/*
+ * Port B setup.
+ *
+ * PB0 - GPIOB_LCD_BL (output push-pull).
+ * PB1 - GPIOB_BUZ (output push-pull).
+ * PB2 - GPIOB_CAM_ENB (input floating).
+ * PB3 - GPIOB_I2S3_CK (alternate 6).
+ * PB4 - GPIOB_LCD_MISO (input floating).
+ * PB5 - GPIOB_I2S3_SD (alternate 6).
+ * PB6 - GPIOB_DCMI_D5 (input pull-up).
+ * PB7 - GPIOB_DCMI_VSYNC (input pull-up).
+ * PB8 - GPIOB_CAN1_RX (alternate 9).
+ * PB9 - GPIOB_CAN1_TX (alternate 9).
+ * PB10 - GPIOB_USB_FS_FAULT (input floating).
+ * PB11 - GPIOB_ETH_RMII_TX_EN (alternate 11).
+ * PB12 - GPIOB_OTG_HS_ID (alternate 12).
+ * PB13 - GPIOB_OTG_HS_VBUS (input pull-up).
+ * PB14 - GPIOB_OTG_HS_DM (alternate 12).
+ * PB15 - GPIOB_OTG_HS_DP (alternate 12).
+ */
+#define VAL_GPIOB_MODER (PIN_MODE_OUTPUT(GPIOB_LCD_BL) | \
+ PIN_MODE_OUTPUT(GPIOB_BUZ) | \
+ PIN_MODE_INPUT(GPIOB_CAM_ENB) | \
+ PIN_MODE_ALTERNATE(GPIOB_I2S3_CK) | \
+ PIN_MODE_INPUT(GPIOB_LCD_MISO) | \
+ PIN_MODE_ALTERNATE(GPIOB_I2S3_SD) | \
+ PIN_MODE_INPUT(GPIOB_DCMI_D5) | \
+ PIN_MODE_INPUT(GPIOB_DCMI_VSYNC) | \
+ PIN_MODE_ALTERNATE(GPIOB_CAN1_RX) | \
+ PIN_MODE_ALTERNATE(GPIOB_CAN1_TX) | \
+ PIN_MODE_INPUT(GPIOB_USB_FS_FAULT) | \
+ PIN_MODE_ALTERNATE(GPIOB_ETH_RMII_TX_EN) | \
+ PIN_MODE_ALTERNATE(GPIOB_OTG_HS_ID) | \
+ PIN_MODE_INPUT(GPIOB_OTG_HS_VBUS) | \
+ PIN_MODE_ALTERNATE(GPIOB_OTG_HS_DM) | \
+ PIN_MODE_ALTERNATE(GPIOB_OTG_HS_DP))
+#define VAL_GPIOB_OTYPER 0x00000000
+#define VAL_GPIOB_OSPEEDR 0xFFFFFFFF
+#define VAL_GPIOB_PUPDR (PIN_PUDR_PULLUP(GPIOB_DCMI_D5) | \
+ PIN_PUDR_PULLUP(GPIOB_DCMI_VSYNC) | \
+ PIN_PUDR_PULLDOWN(GPIOB_OTG_HS_VBUS))
+#define VAL_GPIOB_ODR 0xFFFFFFFC
+#define VAL_GPIOB_AFRL (PIN_AFIO_AF(GPIOB_I2S3_CK, 6) | \
+ PIN_AFIO_AF(GPIOB_I2S3_SD, 6))
+#define VAL_GPIOB_AFRH (PIN_AFIO_AF(GPIOB_CAN1_RX, 9) | \
+ PIN_AFIO_AF(GPIOB_CAN1_TX, 9) | \
+ PIN_AFIO_AF(GPIOB_ETH_RMII_TX_EN, 11) | \
+ PIN_AFIO_AF(GPIOB_OTG_HS_ID, 12) | \
+ PIN_AFIO_AF(GPIOB_OTG_HS_DM, 12) | \
+ PIN_AFIO_AF(GPIOB_OTG_HS_DP, 12))
+
+/*
+ * Port C setup.
+ *
+ * PC0 - GPIOC_TRIM (input floating).
+ * PC1 - GPIOC_ETH_RMII_MDC (alternate 11).
+ * PC2 - GPIOC_USB_FS_VBUSON (output push-pull).
+ * PC3 - GPIOC_LCD_MOSI (output push-pull).
+ * PC4 - GPIOC_ETH_RMII_RXD0 (alternate 11).
+ * PC5 - GPIOC_ETH_RMII_RXD1 (alternate 11).
+ * PC6 - GPIOC_DCMI_D0_US6_TX (alternate 8).
+ * PC7 - GPIOC_I2S3_MCK (alternate 6).
+ * PC8 - GPIOC_DCMI_D2 (input pull-up).
+ * PC9 - GPIOC_DCMI_D3 (input pull-up).
+ * PC10 - GPIOC_SPI3_SCK (alternate 6).
+ * PC11 - GPIOC_SPI3_MISO (alternate 6).
+ * PC12 - GPIOC_SPI3_MOSI (alternate 6).
+ * PC13 - GPIOC_SWITCH_TAMPER (input floating).
+ * PC14 - GPIOC_OSC32_IN (input floating).
+ * PC15 - GPIOC_OSC32_OUT (input floating).
+ */
+#define VAL_GPIOC_MODER (PIN_MODE_INPUT(GPIOC_TRIM) | \
+ PIN_MODE_ALTERNATE(GPIOC_ETH_RMII_MDC) | \
+ PIN_MODE_OUTPUT(GPIOC_USB_FS_VBUSON) | \
+ PIN_MODE_OUTPUT(GPIOC_LCD_MOSI) | \
+ PIN_MODE_ALTERNATE(GPIOC_ETH_RMII_RXD0) | \
+ PIN_MODE_ALTERNATE(GPIOC_ETH_RMII_RXD1) | \
+ PIN_MODE_ALTERNATE(GPIOC_DCMI_D0_US6_TX) | \
+ PIN_MODE_ALTERNATE(GPIOC_I2S3_MCK) | \
+ PIN_MODE_INPUT(GPIOC_DCMI_D2) | \
+ PIN_MODE_INPUT(GPIOC_DCMI_D3) | \
+ PIN_MODE_ALTERNATE(GPIOC_SPI3_SCK) | \
+ PIN_MODE_ALTERNATE(GPIOC_SPI3_MISO) | \
+ PIN_MODE_ALTERNATE(GPIOC_SPI3_MOSI) | \
+ PIN_MODE_INPUT(GPIOC_SWITCH_TAMPER) | \
+ PIN_MODE_INPUT(GPIOC_OSC32_IN) | \
+ PIN_MODE_INPUT(GPIOC_OSC32_OUT))
+#define VAL_GPIOC_OTYPER 0x00000000
+#define VAL_GPIOC_OSPEEDR 0xFFFFFFFF
+#define VAL_GPIOC_PUPDR (PIN_PUDR_PULLUP(GPIOC_DCMI_D2) | \
+ PIN_PUDR_PULLUP(GPIOC_DCMI_D3))
+#define VAL_GPIOC_ODR 0xFFFFFFF3
+#define VAL_GPIOC_AFRL (PIN_AFIO_AF(GPIOC_ETH_RMII_MDC, 11) | \
+ PIN_AFIO_AF(GPIOC_ETH_RMII_RXD0, 11) | \
+ PIN_AFIO_AF(GPIOC_ETH_RMII_RXD1, 11) | \
+ PIN_AFIO_AF(GPIOC_DCMI_D0_US6_TX, 8) | \
+ PIN_AFIO_AF(GPIOC_I2S3_MCK, 6))
+#define VAL_GPIOC_AFRH (PIN_AFIO_AF(GPIOC_SPI3_SCK, 6) | \
+ PIN_AFIO_AF(GPIOC_SPI3_MISO, 6) | \
+ PIN_AFIO_AF(GPIOC_SPI3_MOSI, 6))
+
+/*
+ * Port D setup.
+ *
+ * PD0 - GPIOD_USELESS0 (input pull-up).
+ * PD1 - GPIOD_USELESS1 (input pull-up).
+ * PD2 - GPIOD_SPI3_CS (output opendrain).
+ * PD3 - GPIOD_LCD_RST (output push-pull).
+ * PD4 - GPIOD_USELESS4 (input pull-up).
+ * PD5 - GPIOD_USELESS5 (input pull-up).
+ * PD6 - GPIOD_LCD_CS (output push-pull).
+ * PD7 - GPIOD_USELESS7 (input pull-up).
+ * PD8 - GPIOD_USART3_TX (alternate 8).
+ * PD9 - GPIOD_USART3_RX (alternate 8).
+ * PD10 - GPIOD_USELESS10 (input pull-up).
+ * PD11 - GPIOD_USART3_CTS (alternate 8).
+ * PD12 - GPIOD_USART3_RTS (alternate 8).
+ * PD13 - GPIOD_USB_HS_FAULT (input floating).
+ * PD14 - GPIOD_USELESS14 (input pull-up).
+ * PD15 - GPIOD_USELESS15 (input pull-up).
+ */
+#define VAL_GPIOD_MODER (PIN_MODE_INPUT(GPIOD_USELESS0) | \
+ PIN_MODE_INPUT(GPIOD_USELESS1) | \
+ PIN_MODE_OUTPUT(GPIOD_SPI3_CS) | \
+ PIN_MODE_OUTPUT(GPIOD_LCD_RST) | \
+ PIN_MODE_INPUT(GPIOD_USELESS4) | \
+ PIN_MODE_INPUT(GPIOD_USELESS5) | \
+ PIN_MODE_OUTPUT(GPIOD_LCD_CS) | \
+ PIN_MODE_INPUT(GPIOD_USELESS7) | \
+ PIN_MODE_ALTERNATE(GPIOD_USART3_TX) | \
+ PIN_MODE_ALTERNATE(GPIOD_USART3_RX) | \
+ PIN_MODE_INPUT(GPIOD_USELESS10) | \
+ PIN_MODE_ALTERNATE(GPIOD_USART3_CTS) | \
+ PIN_MODE_ALTERNATE(GPIOD_USART3_RTS) | \
+ PIN_MODE_INPUT(GPIOD_USB_HS_FAULT) | \
+ PIN_MODE_INPUT(GPIOD_USELESS14) | \
+ PIN_MODE_INPUT(GPIOD_USELESS15))
+#define VAL_GPIOD_OTYPER PIN_OTYPE_OPENDRAIN(GPIOD_SPI3_CS)
+#define VAL_GPIOD_OSPEEDR 0xFFFFFFFF
+#define VAL_GPIOD_PUPDR (PIN_PUDR_PULLUP(GPIOD_USELESS0) | \
+ PIN_PUDR_PULLUP(GPIOD_USELESS1) | \
+ PIN_PUDR_PULLUP(GPIOD_USELESS4) | \
+ PIN_PUDR_PULLUP(GPIOD_USELESS5) | \
+ PIN_PUDR_PULLUP(GPIOD_USELESS7) | \
+ PIN_PUDR_PULLUP(GPIOD_USELESS10) | \
+ PIN_PUDR_PULLUP(GPIOD_USELESS14) | \
+ PIN_PUDR_PULLUP(GPIOD_USELESS15))
+#define VAL_GPIOD_ODR 0xFFFFFFFF
+#define VAL_GPIOD_AFRL 0x00000000
+#define VAL_GPIOD_AFRH (PIN_AFIO_AF(GPIOD_USART3_TX, 7) | \
+ PIN_AFIO_AF(GPIOD_USART3_RX, 7) | \
+ PIN_AFIO_AF(GPIOD_USART3_CTS, 7) | \
+ PIN_AFIO_AF(GPIOD_USART3_RTS, 7))
+
+/*
+ * Port E setup.
+ *
+ * PE0 - GPIOE_0 (input pull-up).
+ * PE1 - GPIOE_1 (input pull-up).
+ * PE2 - GPIOE_TEMP_ALERT (input floating).
+ * PE3 - GPIOE_USB_HS_VBUSON (output push-pull).
+ * PE4 - GPIOE_4 (input pull-up).
+ * PE5 - GPIOE_5 (input pull-up).
+ * PE6 - GPIOE_6 (input pull-up).
+ * PE7 - GPIOE_7 (input pull-up).
+ * PE8 - GPIOE_8 (input pull-up).
+ * PE9 - GPIOE_9 (input pull-up).
+ * PE10 - GPIOE_10 (input pull-up).
+ * PE11 - GPIOE_11 (input pull-up).
+ * PE12 - GPIOE_12 (input pull-up).
+ * PE13 - GPIOE_13 (input pull-up).
+ * PE14 - GPIOE_14 (input pull-up).
+ * PE15 - GPIOE_15 (input pull-up).
+ */
+#define VAL_GPIOE_MODER (PIN_MODE_INPUT(GPIOE_0) | \
+ PIN_MODE_INPUT(GPIOE_1) | \
+ PIN_MODE_INPUT(GPIOE_TEMP_ALERT) | \
+ PIN_MODE_OUTPUT(GPIOE_USB_HS_VBUSON) | \
+ PIN_MODE_INPUT(GPIOE_4) | \
+ PIN_MODE_INPUT(GPIOE_5) | \
+ PIN_MODE_INPUT(GPIOE_6) | \
+ PIN_MODE_INPUT(GPIOE_7) | \
+ PIN_MODE_INPUT(GPIOE_8) | \
+ PIN_MODE_INPUT(GPIOE_9) | \
+ PIN_MODE_INPUT(GPIOE_10) | \
+ PIN_MODE_INPUT(GPIOE_11) | \
+ PIN_MODE_INPUT(GPIOE_12) | \
+ PIN_MODE_INPUT(GPIOE_13) | \
+ PIN_MODE_INPUT(GPIOE_14) | \
+ PIN_MODE_INPUT(GPIOE_15))
+#define VAL_GPIOE_OTYPER 0x00000000
+#define VAL_GPIOE_OSPEEDR 0xFFFFFFFF
+#define VAL_GPIOE_PUPDR (PIN_PUDR_PULLUP(GPIOE_0) | \
+ PIN_PUDR_PULLUP(GPIOE_1) | \
+ PIN_PUDR_PULLUP(GPIOE_4) | \
+ PIN_PUDR_PULLUP(GPIOE_5) | \
+ PIN_PUDR_PULLUP(GPIOE_6) | \
+ PIN_PUDR_PULLUP(GPIOE_7) | \
+ PIN_PUDR_PULLUP(GPIOE_8) | \
+ PIN_PUDR_PULLUP(GPIOE_9) | \
+ PIN_PUDR_PULLUP(GPIOE_10) | \
+ PIN_PUDR_PULLUP(GPIOE_11) | \
+ PIN_PUDR_PULLUP(GPIOE_12) | \
+ PIN_PUDR_PULLUP(GPIOE_13) | \
+ PIN_PUDR_PULLUP(GPIOE_14) | \
+ PIN_PUDR_PULLUP(GPIOE_15))
+#define VAL_GPIOE_ODR 0xFFFFFFF7
+#define VAL_GPIOE_AFRL 0x00000000
+#define VAL_GPIOE_AFRH 0x00000000
+
+/*
+ * Port F setup.
+ *
+ * PF0 - GPIOF_0 (input pull-up).
+ * PF1 - GPIOF_1 (input pull-up).
+ * PF2 - GPIOF_2 (input pull-up).
+ * PF3 - GPIOF_3 (input pull-up).
+ * PF4 - GPIOF_4 (input pull-up).
+ * PF5 - GPIOF_5 (input pull-up).
+ * PF6 - GPIOF_STAT1 (output push-pull).
+ * PF7 - GPIOF_STAT2 (output push-pull).
+ * PF8 - GPIOF_STAT3 (output push-pull).
+ * PF9 - GPIOF_CAM_PWR (output push-pull).
+ * PF10 - GPIOF_10 (input pull-up).
+ * PF11 - GPIOF_CAM_RS (output push-pull).
+ * PF12 - GPIOF_12 (input pull-up).
+ * PF13 - GPIOF_13 (input pull-up).
+ * PF14 - GPIOF_14 (input pull-up).
+ * PF15 - GPIOF_15 (input pull-up).
+ */
+#define VAL_GPIOF_MODER (PIN_MODE_INPUT(GPIOF_0) | \
+ PIN_MODE_INPUT(GPIOF_1) | \
+ PIN_MODE_INPUT(GPIOF_2) | \
+ PIN_MODE_INPUT(GPIOF_3) | \
+ PIN_MODE_INPUT(GPIOF_4) | \
+ PIN_MODE_INPUT(GPIOF_5) | \
+ PIN_MODE_OUTPUT(GPIOF_STAT1) | \
+ PIN_MODE_OUTPUT(GPIOF_STAT2) | \
+ PIN_MODE_OUTPUT(GPIOF_STAT3) | \
+ PIN_MODE_OUTPUT(GPIOF_CAM_PWR) | \
+ PIN_MODE_INPUT(GPIOF_10) | \
+ PIN_MODE_OUTPUT(GPIOF_CAM_RS) | \
+ PIN_MODE_INPUT(GPIOF_12) | \
+ PIN_MODE_INPUT(GPIOF_13) | \
+ PIN_MODE_INPUT(GPIOF_14) | \
+ PIN_MODE_INPUT(GPIOF_15))
+#define VAL_GPIOF_OTYPER 0x00000000
+#define VAL_GPIOF_OSPEEDR 0xFFFFFFFF
+#define VAL_GPIOF_PUPDR (PIN_PUDR_PULLUP(GPIOF_0) | \
+ PIN_PUDR_PULLUP(GPIOF_1) | \
+ PIN_PUDR_PULLUP(GPIOF_2) | \
+ PIN_PUDR_PULLUP(GPIOF_3) | \
+ PIN_PUDR_PULLUP(GPIOF_4) | \
+ PIN_PUDR_PULLUP(GPIOF_5) | \
+ PIN_PUDR_PULLUP(GPIOF_10) | \
+ PIN_PUDR_PULLUP(GPIOF_12) | \
+ PIN_PUDR_PULLUP(GPIOF_13) | \
+ PIN_PUDR_PULLUP(GPIOF_14) | \
+ PIN_PUDR_PULLUP(GPIOF_15))
+#define VAL_GPIOF_ODR 0xFFFFFC3F
+#define VAL_GPIOF_AFRL 0x00000000
+#define VAL_GPIOF_AFRH 0x00000000
+
+/*
+ * Port G setup.
+ *
+ * PG0 - GPIOG_0 (input pull-up).
+ * PG1 - GPIOG_1 (input pull-up).
+ * PG2 - GPIOG_2 (input pull-up).
+ * PG3 - GPIOG_3 (input pull-up).
+ * PG4 - GPIOG_4 (input pull-up).
+ * PG5 - GPIOG_5 (input pull-up).
+ * PG6 - GPIOG_RIGHT (input floating).
+ * PG7 - GPIOG_UP (input floating).
+ * PG8 - GPIOG_DOWN (input floating).
+ * PG9 - GPIOG_USART6_RX (alternate 8).
+ * PG10 - GPIOG_10 (input pull-up).
+ * PG11 - GPIOG_LEFT (input floating).
+ * PG12 - GPIOG_12 (input pull-up).
+ * PG13 - GPIOG_ETH_RMII_TXD0 (alternate 11).
+ * PG14 - GPIOG_ETH_RMII_TXD1 (alternate 11).
+ * PG15 - GPIOG_CENT (input pull-up).
+ */
+#define VAL_GPIOG_MODER (PIN_MODE_INPUT(GPIOG_0) | \
+ PIN_MODE_INPUT(GPIOG_1) | \
+ PIN_MODE_INPUT(GPIOG_2) | \
+ PIN_MODE_INPUT(GPIOG_3) | \
+ PIN_MODE_INPUT(GPIOG_4) | \
+ PIN_MODE_INPUT(GPIOG_5) | \
+ PIN_MODE_INPUT(GPIOG_RIGHT) | \
+ PIN_MODE_INPUT(GPIOG_UP) | \
+ PIN_MODE_INPUT(GPIOG_DOWN) | \
+ PIN_MODE_ALTERNATE(GPIOG_USART6_RX) | \
+ PIN_MODE_INPUT(GPIOG_10) | \
+ PIN_MODE_INPUT(GPIOG_LEFT) | \
+ PIN_MODE_INPUT(GPIOG_12) | \
+ PIN_MODE_ALTERNATE(GPIOG_ETH_RMII_TXD0) | \
+ PIN_MODE_ALTERNATE(GPIOG_ETH_RMII_TXD1) | \
+ PIN_MODE_INPUT(GPIOG_CENT))
+#define VAL_GPIOG_OTYPER 0x00000000
+#define VAL_GPIOG_OSPEEDR 0xFFFFFFFF
+#define VAL_GPIOG_PUPDR (PIN_PUDR_PULLUP(GPIOG_0) | \
+ PIN_PUDR_PULLUP(GPIOG_1) | \
+ PIN_PUDR_PULLUP(GPIOG_2) | \
+ PIN_PUDR_PULLUP(GPIOG_3) | \
+ PIN_PUDR_PULLUP(GPIOG_4) | \
+ PIN_PUDR_PULLUP(GPIOG_5) | \
+ PIN_PUDR_PULLUP(GPIOG_10) | \
+ PIN_PUDR_PULLUP(GPIOG_12))
+#define VAL_GPIOG_ODR 0xFFFFFFFF
+#define VAL_GPIOG_AFRL 0x00000000
+#define VAL_GPIOG_AFRH (PIN_AFIO_AF(GPIOG_USART6_RX, 8) | \
+ PIN_AFIO_AF(GPIOG_ETH_RMII_TXD0, 11) | \
+ PIN_AFIO_AF(GPIOG_ETH_RMII_TXD1, 11))
+
+/*
+ * Port H setup.
+ * All input with pull-up except:
+ * PH0 - GPIOH_OSC_IN (input floating).
+ * PH1 - GPIOH_OSC_OUT (input floating).
+ */
+#define VAL_GPIOH_MODER (PIN_MODE_INPUT(GPIOH_OSC_IN) | \
+ PIN_MODE_INPUT(GPIOH_OSC_OUT) | \
+ PIN_MODE_INPUT(2) | \
+ PIN_MODE_INPUT(3) | \
+ PIN_MODE_INPUT(4) | \
+ PIN_MODE_INPUT(5) | \
+ PIN_MODE_INPUT(6) | \
+ PIN_MODE_INPUT(7) | \
+ PIN_MODE_INPUT(8) | \
+ PIN_MODE_INPUT(9) | \
+ PIN_MODE_INPUT(10) | \
+ PIN_MODE_INPUT(11) | \
+ PIN_MODE_INPUT(12) | \
+ PIN_MODE_INPUT(13) | \
+ PIN_MODE_INPUT(14) | \
+ PIN_MODE_INPUT(15))
+#define VAL_GPIOH_OTYPER 0x00000000
+#define VAL_GPIOH_OSPEEDR 0xFFFFFFFF
+#define VAL_GPIOH_PUPDR (PIN_PUDR_FLOATING(GPIOH_OSC_IN) | \
+ PIN_PUDR_FLOATING(GPIOH_OSC_OUT) | \
+ PIN_PUDR_PULLUP(2) | \
+ PIN_PUDR_PULLUP(3) | \
+ PIN_PUDR_PULLUP(4) | \
+ PIN_PUDR_PULLUP(5) | \
+ PIN_PUDR_PULLUP(6) | \
+ PIN_PUDR_PULLUP(7) | \
+ PIN_PUDR_PULLUP(8) | \
+ PIN_PUDR_PULLUP(9) | \
+ PIN_PUDR_PULLUP(10) | \
+ PIN_PUDR_PULLUP(11) | \
+ PIN_PUDR_PULLUP(12) | \
+ PIN_PUDR_PULLUP(13) | \
+ PIN_PUDR_PULLUP(14) | \
+ PIN_PUDR_PULLUP(15))
+#define VAL_GPIOH_ODR 0xFFFFFFFF
+#define VAL_GPIOH_AFRL 0x00000000
+#define VAL_GPIOH_AFRH 0x00000000
+
+/*
+ * Port I setup.
+ * All input with pull-up.
+ */
+#define VAL_GPIOI_MODER 0x00000000
+#define VAL_GPIOI_OTYPER 0x00000000
+#define VAL_GPIOI_OSPEEDR 0xFFFFFFFF
+#define VAL_GPIOI_PUPDR (PIN_PUDR_PULLUP(0) | \
+ PIN_PUDR_PULLUP(1) | \
+ PIN_PUDR_PULLUP(2) | \
+ PIN_PUDR_PULLUP(3) | \
+ PIN_PUDR_PULLUP(4) | \
+ PIN_PUDR_PULLUP(5) | \
+ PIN_PUDR_PULLUP(6) | \
+ PIN_PUDR_PULLUP(7) | \
+ PIN_PUDR_PULLUP(8) | \
+ PIN_PUDR_PULLUP(9) | \
+ PIN_PUDR_PULLUP(10) | \
+ PIN_PUDR_PULLUP(11) | \
+ PIN_PUDR_PULLUP(12) | \
+ PIN_PUDR_PULLUP(13) | \
+ PIN_PUDR_PULLUP(14) | \
+ PIN_PUDR_PULLUP(15))
+#define VAL_GPIOI_ODR 0xFFFFFFFF
+#define VAL_GPIOI_AFRL 0x00000000
+#define VAL_GPIOI_AFRH 0x00000000
+
+#if !defined(_FROM_ASM_)
+#ifdef __cplusplus
+extern "C" {
+#endif
+ void boardInit(void);
+#ifdef __cplusplus
+}
+#endif
+#endif /* _FROM_ASM_ */
+
+#endif /* _BOARD_H_ */
diff --git a/boards/OLIMEX_STM32_P407/board.mk b/boards/OLIMEX_STM32_P407/board.mk new file mode 100644 index 000000000..b1e5aafe2 --- /dev/null +++ b/boards/OLIMEX_STM32_P407/board.mk @@ -0,0 +1,5 @@ +# List of all the board related files.
+BOARDSRC = ${CHIBIOS}/boards/OLIMEX_STM32_P407/board.c
+
+# Required include directories
+BOARDINC = ${CHIBIOS}/boards/OLIMEX_STM32_P407
|