diff options
| -rw-r--r-- | boards/ST_STM8S_DISCOVERY/board.h | 145 |
1 files changed, 46 insertions, 99 deletions
diff --git a/boards/ST_STM8S_DISCOVERY/board.h b/boards/ST_STM8S_DISCOVERY/board.h index 337d02d9e..f296bcd2a 100644 --- a/boards/ST_STM8S_DISCOVERY/board.h +++ b/boards/ST_STM8S_DISCOVERY/board.h @@ -21,148 +21,95 @@ #define _BOARD_H_
/*
- * Setup for STMicroelectronics STM8L-Discovery board.
+ * Setup for STMicroelectronics STM8S-Discovery board.
*/
/*
* Board identifiers.
*/
-#define BOARD_ST_STM8L_DISCOVERY
-#define BOARD_NAME "ST STM8L-Discovery"
+#define BOARD_ST_STM8S_DISCOVERY
+#define BOARD_NAME "ST STM8S-Discovery"
/*
- * Board frequencies and bypass modes.
- *
- * The bypass must be set to TRUE if the chip is driven by an external
- * oscillator rather than a crystal. Frequency must be set to zero if
- * the clock source is not used at all.
- * The following constants are used by the HAL low level driver for
- * correct clock initialization.
+ * Board frequencies.
*/
-#define HSECLK 0
-#define HSEBYPASS FALSE
-#define LSECLK 32768
-#define LSEBYPASS FALSE
+#define HSECLK 16000000
/*
* MCU model used on the board.
*/
-#define STM8L152C6
-#define STM8L15X_MD
+#define STM8S105
/*
* Pin definitions.
*/
-#define PA_OSC_IN 2
-#define PA_OSC_OUT 3
-#define PA_LCD_COM0 4
-#define PA_LCD_COM1 5
-#define PA_LCD_COM2 6
-#define PA_LCD_SEG0 7
-
-#define PB_LCD_SEG10 0
-#define PB_LCD_SEG11 1
-#define PB_LCD_SEG12 2
-#define PB_LCD_SEG13 3
-#define PB_LCD_SEG14 4
-#define PB_LCD_SEG15 5
-#define PB_LCD_SEG16 6
-#define PB_LCD_SEG17 7
-
-#define PC_UNUSED 0
-#define PC_BUTTON 1
-#define PC_LCD_SEG22 2
-#define PC_LCD_SEG23 3
-#define PC_IDD_CNT_EN 4
-#define PC_LED4 7
-
-#define PD_LCD_SEG7 0
-#define PD_LCD_COM3 1
-#define PD_LCD_SEG8 2
-#define PD_LCD_SEG9 3
-#define PD_LCD_SEG18 4
-#define PD_LCD_SEG19 5
-#define PD_LCD_SEG20 6
-#define PD_LCD_SEG21 7
-
-#define PE_LCD_SEG1 0
-#define PE_LCD_SEG2 1
-#define PE_LCD_SEG3 2
-#define PE_LCD_SEG4 3
-#define PE_LCD_SEG5 4
-#define PE_LCD_SEG6 5
-#define PE_IDD_WAKEUP 6
-#define PE_LED3 7
-
-#define PF0_IDD_MEASUREMENT 0
+#define PA_OSCIN 1
+#define PA_OSCOUT 2
+
+#define PC_TS_KEY 1
+#define PC_TS_LOADREF 2
+#define PC_TS_SHIELD 3
+
+#define PD_LD10 0
+#define PD_SWIM 1
+#define PD_TX 5
+#define PD_RX 6
/*
* Port A initial setup.
*/
-#define VAL_GPIOAODR 0
-#define VAL_GPIOADDR 0 /* All inputs. */
-#define VAL_GPIOACR1 0xFF /* All pull-up. */
-#define VAL_GPIOACR2 0
+#define VAL_GPIOAODR 0
+#define VAL_GPIOADDR 0 /* All inputs. */
+#define VAL_GPIOACR1 0xFF /* All pull-up or push-pull. */
+#define VAL_GPIOACR2 0
/*
* Port B initial setup.
*/
-#define VAL_GPIOBODR 0
-#define VAL_GPIOBDDR 0 /* All inputs. */
-#define VAL_GPIOBCR1 0xFF /* All pull-up. */
-#define VAL_GPIOBCR2 0
+#define VAL_GPIOBODR 0
+#define VAL_GPIOBDDR 0 /* All inputs. */
+#define VAL_GPIOBCR1 0xFF /* All push-pull. */
+#define VAL_GPIOBCR2 0
/*
* Port C initial setup.
*/
-#define VAL_GPIOCODR (1 < PC_LED4)
-#define VAL_GPIOCDDR (1 < PC_LED4)
-#define VAL_GPIOCCR1 0xFF /* All pull-up/open drain. */
-#define VAL_GPIOCCR2 0
+#define VAL_GPIOCODR 0
+#define VAL_GPIOCDDR 0 /* All inputs. */
+#define VAL_GPIOCCR1 0xFF /* All pull-up. */
+#define VAL_GPIOCCR2 0
/*
* Port D initial setup.
*/
-#define VAL_GPIODODR 0
-#define VAL_GPIODDDR 0 /* All inputs. */
-#define VAL_GPIODCR1 0xFF /* All pull-up. */
-#define VAL_GPIODCR2 0
+#define VAL_GPIODODR (1 << PD_LD10) | (1 << PD_TX)
+#define VAL_GPIODDDR (1 << PD_LD10) | (1 << PD_TX)
+#define VAL_GPIODCR1 0xFF /* All pull-up. */
+#define VAL_GPIODCR2 0
/*
* Port E initial setup.
*/
-#define VAL_GPIOEODR (1 < PE_LED3)
-#define VAL_GPIOEDDR (1 < PE_LED3)
-#define VAL_GPIOECR1 0xFF /* All pull-up/open drain. */
-#define VAL_GPIOECR2 0
+#define VAL_GPIOEODR 0
+#define VAL_GPIOEDDR 0 /* All inputs. */
+#define VAL_GPIOECR1 0xFF /* All pull-up. */
+#define VAL_GPIOECR2 0
/*
* Port F initial setup.
*/
-#define VAL_GPIOFODR 0
-#define VAL_GPIOFDDR 0 /* All inputs. */
-#define VAL_GPIOFCR1 0xFF /* All pull-up. */
-#define VAL_GPIOFCR2 0
-
-/*
- * Port G initial setup (not present but still initialized).
- */
-#define VAL_GPIOGODR 0
-#define VAL_GPIOGDDR 0 /* All inputs. */
-#define VAL_GPIOGCR1 0xFF /* All pull-up. */
-#define VAL_GPIOGCR2 0
+#define VAL_GPIOFODR 0
+#define VAL_GPIOFDDR 0 /* All inputs. */
+#define VAL_GPIOFCR1 0xFF /* All pull-up. */
+#define VAL_GPIOFCR2 0
/*
- * TIM2 interrupt handler segment. + * Port G initial setup.
*/
-#define _TIM2_UPDATE_ISR() { \
- if ((TIM2->SR1 & TIM_SR1_UIF) != 0) { \
- chSysLockFromIsr(); \
- chSysTimerHandlerI(); \
- chSysUnlockFromIsr(); \
- TIM2->SR1 = 0; \
- } \
-}
+#define VAL_GPIOGODR 0
+#define VAL_GPIOGDDR 0 /* All inputs. */
+#define VAL_GPIOGCR1 0xFF /* All pull-up or push-pull. */
+#define VAL_GPIOGCR2 0
#ifdef __cplusplus
extern "C" {
|