diff options
29 files changed, 540 insertions, 370 deletions
diff --git a/demos/ARMCM4-STM32F407-DISCOVERY-MEMS/mcuconf.h b/demos/ARMCM4-STM32F407-DISCOVERY-MEMS/mcuconf.h index 71a90a219..7b2bfa507 100644 --- a/demos/ARMCM4-STM32F407-DISCOVERY-MEMS/mcuconf.h +++ b/demos/ARMCM4-STM32F407-DISCOVERY-MEMS/mcuconf.h @@ -245,6 +245,8 @@ #define STM32_UART_USE_USART1 FALSE
#define STM32_UART_USE_USART2 FALSE
#define STM32_UART_USE_USART3 FALSE
+#define STM32_UART_USE_UART4 FALSE
+#define STM32_UART_USE_UART5 FALSE
#define STM32_UART_USE_USART6 FALSE
#define STM32_UART_USART1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 5)
#define STM32_UART_USART1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7)
@@ -252,15 +254,23 @@ #define STM32_UART_USART2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6)
#define STM32_UART_USART3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 1)
#define STM32_UART_USART3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3)
+#define STM32_UART_UART4_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2)
+#define STM32_UART_UART4_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4)
+#define STM32_UART_UART5_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0)
+#define STM32_UART_UART5_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7)
#define STM32_UART_USART6_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 2)
#define STM32_UART_USART6_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7)
#define STM32_UART_USART1_IRQ_PRIORITY 12
#define STM32_UART_USART2_IRQ_PRIORITY 12
#define STM32_UART_USART3_IRQ_PRIORITY 12
+#define STM32_UART_UART4_IRQ_PRIORITY 12
+#define STM32_UART_UART5_IRQ_PRIORITY 12
#define STM32_UART_USART6_IRQ_PRIORITY 12
#define STM32_UART_USART1_DMA_PRIORITY 0
#define STM32_UART_USART2_DMA_PRIORITY 0
#define STM32_UART_USART3_DMA_PRIORITY 0
+#define STM32_UART_UART4_DMA_PRIORITY 0
+#define STM32_UART_UART5_DMA_PRIORITY 0
#define STM32_UART_USART6_DMA_PRIORITY 0
#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure")
diff --git a/demos/ARMCM4-STM32F407-DISCOVERY/mcuconf.h b/demos/ARMCM4-STM32F407-DISCOVERY/mcuconf.h index 839b5665a..174a9fe20 100644 --- a/demos/ARMCM4-STM32F407-DISCOVERY/mcuconf.h +++ b/demos/ARMCM4-STM32F407-DISCOVERY/mcuconf.h @@ -245,6 +245,8 @@ #define STM32_UART_USE_USART1 FALSE
#define STM32_UART_USE_USART2 FALSE
#define STM32_UART_USE_USART3 FALSE
+#define STM32_UART_USE_UART4 FALSE
+#define STM32_UART_USE_UART5 FALSE
#define STM32_UART_USE_USART6 FALSE
#define STM32_UART_USART1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 5)
#define STM32_UART_USART1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7)
@@ -252,15 +254,23 @@ #define STM32_UART_USART2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6)
#define STM32_UART_USART3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 1)
#define STM32_UART_USART3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3)
+#define STM32_UART_UART4_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2)
+#define STM32_UART_UART4_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4)
+#define STM32_UART_UART5_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0)
+#define STM32_UART_UART5_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7)
#define STM32_UART_USART6_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 2)
#define STM32_UART_USART6_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7)
#define STM32_UART_USART1_IRQ_PRIORITY 12
#define STM32_UART_USART2_IRQ_PRIORITY 12
#define STM32_UART_USART3_IRQ_PRIORITY 12
+#define STM32_UART_UART4_IRQ_PRIORITY 12
+#define STM32_UART_UART5_IRQ_PRIORITY 12
#define STM32_UART_USART6_IRQ_PRIORITY 12
#define STM32_UART_USART1_DMA_PRIORITY 0
#define STM32_UART_USART2_DMA_PRIORITY 0
#define STM32_UART_USART3_DMA_PRIORITY 0
+#define STM32_UART_UART4_DMA_PRIORITY 0
+#define STM32_UART_UART5_DMA_PRIORITY 0
#define STM32_UART_USART6_DMA_PRIORITY 0
#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure")
diff --git a/os/hal/platforms/STM32/SPIv1/spi_lld.c b/os/hal/platforms/STM32/SPIv1/spi_lld.c index dad91c6a8..74d21273a 100644 --- a/os/hal/platforms/STM32/SPIv1/spi_lld.c +++ b/os/hal/platforms/STM32/SPIv1/spi_lld.c @@ -216,49 +216,49 @@ void spi_lld_start(SPIDriver *spip) { if (spip->state == SPI_STOP) {
#if STM32_SPI_USE_SPI1
if (&SPID1 == spip) {
- bool_t b;
+ bool b;
b = dmaStreamAllocate(spip->dmarx,
STM32_SPI_SPI1_IRQ_PRIORITY,
(stm32_dmaisr_t)spi_lld_serve_rx_interrupt,
(void *)spip);
- chDbgAssert(!b, "spi_lld_start(), #1", "stream already allocated");
+ osalDbgAssert(!b, "stream already allocated");
b = dmaStreamAllocate(spip->dmatx,
STM32_SPI_SPI1_IRQ_PRIORITY,
(stm32_dmaisr_t)spi_lld_serve_tx_interrupt,
(void *)spip);
- chDbgAssert(!b, "spi_lld_start(), #2", "stream already allocated");
+ osalDbgAssert(!b, "stream already allocated");
rccEnableSPI1(FALSE);
}
#endif
#if STM32_SPI_USE_SPI2
if (&SPID2 == spip) {
- bool_t b;
+ bool b;
b = dmaStreamAllocate(spip->dmarx,
STM32_SPI_SPI2_IRQ_PRIORITY,
(stm32_dmaisr_t)spi_lld_serve_rx_interrupt,
(void *)spip);
- chDbgAssert(!b, "spi_lld_start(), #3", "stream already allocated");
+ osalDbgAssert(!b, "stream already allocated");
b = dmaStreamAllocate(spip->dmatx,
STM32_SPI_SPI2_IRQ_PRIORITY,
(stm32_dmaisr_t)spi_lld_serve_tx_interrupt,
(void *)spip);
- chDbgAssert(!b, "spi_lld_start(), #4", "stream already allocated");
+ osalDbgAssert(!b, "stream already allocated");
rccEnableSPI2(FALSE);
}
#endif
#if STM32_SPI_USE_SPI3
if (&SPID3 == spip) {
- bool_t b;
+ bool b;
b = dmaStreamAllocate(spip->dmarx,
STM32_SPI_SPI3_IRQ_PRIORITY,
(stm32_dmaisr_t)spi_lld_serve_rx_interrupt,
(void *)spip);
- chDbgAssert(!b, "spi_lld_start(), #5", "stream already allocated");
+ osalDbgAssert(!b, "stream already allocated");
b = dmaStreamAllocate(spip->dmatx,
STM32_SPI_SPI3_IRQ_PRIORITY,
(stm32_dmaisr_t)spi_lld_serve_tx_interrupt,
(void *)spip);
- chDbgAssert(!b, "spi_lld_start(), #6", "stream already allocated");
+ osalDbgAssert(!b, "stream already allocated");
rccEnableSPI3(FALSE);
}
#endif
diff --git a/os/hal/platforms/STM32/SPIv1/spi_lld.h b/os/hal/platforms/STM32/SPIv1/spi_lld.h index fe37c8f66..b0a65d7cd 100644 --- a/os/hal/platforms/STM32/SPIv1/spi_lld.h +++ b/os/hal/platforms/STM32/SPIv1/spi_lld.h @@ -328,17 +328,13 @@ struct SPIDriver{ /**
* @brief Waiting thread.
*/
- Thread *thread;
+ thread_reference_t thread;
#endif /* SPI_USE_WAIT */
#if SPI_USE_MUTUAL_EXCLUSION || defined(__DOXYGEN__)
-#if CH_USE_MUTEXES || defined(__DOXYGEN__)
/**
* @brief Mutex protecting the bus.
*/
- Mutex mutex;
-#elif CH_USE_SEMAPHORES
- Semaphore semaphore;
-#endif
+ mutex_t mutex;
#endif /* SPI_USE_MUTUAL_EXCLUSION */
#if defined(SPI_DRIVER_EXT_FIELDS)
SPI_DRIVER_EXT_FIELDS
diff --git a/os/hal/platforms/STM32/USARTv1/uart_lld.c b/os/hal/platforms/STM32/USARTv1/uart_lld.c index cad1cf084..d77d9bd98 100644 --- a/os/hal/platforms/STM32/USARTv1/uart_lld.c +++ b/os/hal/platforms/STM32/USARTv1/uart_lld.c @@ -59,16 +59,16 @@ STM32_DMA_GETCHANNEL(STM32_UART_UART4_RX_DMA_STREAM, \
STM32_UART4_RX_DMA_CHN)
-#define UART4_TX_DMA_CHANNEL \
- STM32_DMA_GETCHANNEL(STM32_UART_UART4_TX_DMA_STREAM, \
+#define UART4_TX_DMA_CHANNEL \
+ STM32_DMA_GETCHANNEL(STM32_UART_UART4_TX_DMA_STREAM, \
STM32_UART4_TX_DMA_CHN)
#define UART5_RX_DMA_CHANNEL \
STM32_DMA_GETCHANNEL(STM32_UART_UART5_RX_DMA_STREAM, \
STM32_UART5_RX_DMA_CHN)
-#define UART5_TX_DMA_CHANNEL \
- STM32_DMA_GETCHANNEL(STM32_UART_UART5_TX_DMA_STREAM, \
+#define UART5_TX_DMA_CHANNEL \
+ STM32_DMA_GETCHANNEL(STM32_UART_UART5_TX_DMA_STREAM, \
STM32_UART5_TX_DMA_CHN)
#define USART6_RX_DMA_CHANNEL \
@@ -79,14 +79,6 @@ STM32_DMA_GETCHANNEL(STM32_UART_USART6_TX_DMA_STREAM, \
STM32_USART6_TX_DMA_CHN)
-#if (STM32_UART_USE_UART4 || STM32_UART_USE_UART5)
- #define STM32_UART45_CR2_CHECK_MASK (USART_CR2_STOP_0 | USART_CR2_CLKEN | \
- USART_CR2_CPOL | USART_CR2_CPHA | USART_CR2_LBCL)
-
- #define STM32_UART45_CR3_CHECK_MASK (USART_CR3_CTSIE | USART_CR3_CTSE | \
- USART_CR3_RTSE | USART_CR3_SCEN | USART_CR3_NACK)
-#endif
-
/*===========================================================================*/
/* Driver exported variables. */
/*===========================================================================*/
@@ -508,28 +500,6 @@ void uart_lld_init(void) { }
/**
- * @brief Check CR2 and CR3 values for compatibility with UART4, UART5.
- *
- * @param[in] uartp pointer to the @p UARTDriver object
- *
- * @notapi
- */
-#if (STM32_UART_USE_UART4 || STM32_UART_USE_UART5)
-static void uart_check_config(const UARTDriver *uartp) {
-
- uint16_t cr;
-
- cr = uartp->config->cr2;
- chDbgCheck((cr & STM32_UART45_CR2_CHECK_MASK) == 0,
- "Some flags from CR2 unavailable for this UART");
-
- cr = uartp->config->cr3;
- chDbgCheck((cr & STM32_UART45_CR3_CHECK_MASK) == 0,
- "Some flags from CR3 unavailable for this UART");
-}
-#endif /* (STM32_UART_USE_UART4 || STM32_UART_USE_UART5) */
-
-/**
* @brief Configures and activates the UART peripheral.
*
* @param[in] uartp pointer to the @p UARTDriver object
@@ -538,31 +508,22 @@ static void uart_check_config(const UARTDriver *uartp) { */
void uart_lld_start(UARTDriver *uartp) {
-#if STM32_UART_USE_UART4
- if (uartp == &UARTD4)
- uart_check_config(uartp);
-#elif STM32_UART_USE_UART5
- else if (uartp == &UARTD5)
- uart_check_config(uartp);
-#endif
-
if (uartp->state == UART_STOP) {
#if STM32_UART_USE_USART1
if (&UARTD1 == uartp) {
- bool_t b;
+ bool b;
b = dmaStreamAllocate(uartp->dmarx,
STM32_UART_USART1_IRQ_PRIORITY,
(stm32_dmaisr_t)uart_lld_serve_rx_end_irq,
(void *)uartp);
- chDbgAssert(!b, "uart_lld_start(), #1", "stream already allocated");
+ osalDbgAssert(!b, "stream already allocated");
b = dmaStreamAllocate(uartp->dmatx,
STM32_UART_USART1_IRQ_PRIORITY,
(stm32_dmaisr_t)uart_lld_serve_tx_end_irq,
(void *)uartp);
- chDbgAssert(!b, "uart_lld_start(), #2", "stream already allocated");
+ osalDbgAssert(!b, "stream already allocated");
rccEnableUSART1(FALSE);
- nvicEnableVector(STM32_USART1_NUMBER,
- CORTEX_PRIORITY_MASK(STM32_UART_USART1_IRQ_PRIORITY));
+ nvicEnableVector(STM32_USART1_NUMBER, STM32_UART_USART1_IRQ_PRIORITY);
uartp->dmamode |= STM32_DMA_CR_CHSEL(USART1_RX_DMA_CHANNEL) |
STM32_DMA_CR_PL(STM32_UART_USART1_DMA_PRIORITY);
}
@@ -570,20 +531,19 @@ void uart_lld_start(UARTDriver *uartp) { #if STM32_UART_USE_USART2
if (&UARTD2 == uartp) {
- bool_t b;
+ bool b;
b = dmaStreamAllocate(uartp->dmarx,
STM32_UART_USART2_IRQ_PRIORITY,
(stm32_dmaisr_t)uart_lld_serve_rx_end_irq,
(void *)uartp);
- chDbgAssert(!b, "uart_lld_start(), #3", "stream already allocated");
+ osalDbgAssert(!b, "stream already allocated");
b = dmaStreamAllocate(uartp->dmatx,
STM32_UART_USART2_IRQ_PRIORITY,
(stm32_dmaisr_t)uart_lld_serve_tx_end_irq,
(void *)uartp);
- chDbgAssert(!b, "uart_lld_start(), #4", "stream already allocated");
+ osalDbgAssert(!b, "stream already allocated");
rccEnableUSART2(FALSE);
- nvicEnableVector(STM32_USART2_NUMBER,
- CORTEX_PRIORITY_MASK(STM32_UART_USART2_IRQ_PRIORITY));
+ nvicEnableVector(STM32_USART2_NUMBER, STM32_UART_USART2_IRQ_PRIORITY);
uartp->dmamode |= STM32_DMA_CR_CHSEL(USART2_RX_DMA_CHANNEL) |
STM32_DMA_CR_PL(STM32_UART_USART2_DMA_PRIORITY);
}
@@ -591,20 +551,19 @@ void uart_lld_start(UARTDriver *uartp) { #if STM32_UART_USE_USART3
if (&UARTD3 == uartp) {
- bool_t b;
+ bool b;
b = dmaStreamAllocate(uartp->dmarx,
STM32_UART_USART3_IRQ_PRIORITY,
(stm32_dmaisr_t)uart_lld_serve_rx_end_irq,
(void *)uartp);
- chDbgAssert(!b, "uart_lld_start(), #5", "stream already allocated");
+ osalDbgAssert(!b, "stream already allocated");
b = dmaStreamAllocate(uartp->dmatx,
STM32_UART_USART3_IRQ_PRIORITY,
(stm32_dmaisr_t)uart_lld_serve_tx_end_irq,
(void *)uartp);
- chDbgAssert(!b, "uart_lld_start(), #6", "stream already allocated");
+ osalDbgAssert(!b, "stream already allocated");
rccEnableUSART3(FALSE);
- nvicEnableVector(STM32_USART3_NUMBER,
- CORTEX_PRIORITY_MASK(STM32_UART_USART3_IRQ_PRIORITY));
+ nvicEnableVector(STM32_USART3_NUMBER, STM32_UART_USART3_IRQ_PRIORITY);
uartp->dmamode |= STM32_DMA_CR_CHSEL(USART3_RX_DMA_CHANNEL) |
STM32_DMA_CR_PL(STM32_UART_USART3_DMA_PRIORITY);
}
@@ -612,20 +571,19 @@ void uart_lld_start(UARTDriver *uartp) { #if STM32_UART_USE_UART4
if (&UARTD4 == uartp) {
- bool_t b;
+ bool b;
b = dmaStreamAllocate(uartp->dmarx,
STM32_UART_UART4_IRQ_PRIORITY,
(stm32_dmaisr_t)uart_lld_serve_rx_end_irq,
(void *)uartp);
- chDbgAssert(!b, "uart_lld_start(), #7", "stream already allocated");
+ osalDbgAssert(!b, "stream already allocated");
b = dmaStreamAllocate(uartp->dmatx,
STM32_UART_UART4_IRQ_PRIORITY,
(stm32_dmaisr_t)uart_lld_serve_tx_end_irq,
(void *)uartp);
- chDbgAssert(!b, "uart_lld_start(), #8", "stream already allocated");
+ osalDbgAssert(!b, "stream already allocated");
rccEnableUART4(FALSE);
- nvicEnableVector(STM32_UART4_NUMBER,
- CORTEX_PRIORITY_MASK(STM32_UART_UART4_IRQ_PRIORITY));
+ nvicEnableVector(STM32_UART4_NUMBER, STM32_UART_UART4_IRQ_PRIORITY);
uartp->dmamode |= STM32_DMA_CR_CHSEL(UART4_RX_DMA_CHANNEL) |
STM32_DMA_CR_PL(STM32_UART_UART4_DMA_PRIORITY);
}
@@ -633,20 +591,19 @@ void uart_lld_start(UARTDriver *uartp) { #if STM32_UART_USE_UART5
if (&UARTD5 == uartp) {
- bool_t b;
+ bool b;
b = dmaStreamAllocate(uartp->dmarx,
STM32_UART_UART5_IRQ_PRIORITY,
(stm32_dmaisr_t)uart_lld_serve_rx_end_irq,
(void *)uartp);
- chDbgAssert(!b, "uart_lld_start(), #9", "stream already allocated");
+ osalDbgAssert(!b, "stream already allocated");
b = dmaStreamAllocate(uartp->dmatx,
STM32_UART_UART5_IRQ_PRIORITY,
(stm32_dmaisr_t)uart_lld_serve_tx_end_irq,
(void *)uartp);
- chDbgAssert(!b, "uart_lld_start(), #10", "stream already allocated");
+ osalDbgAssert(!b, "stream already allocated");
rccEnableUART5(FALSE);
- nvicEnableVector(STM32_UART5_NUMBER,
- CORTEX_PRIORITY_MASK(STM32_UART_UART5_IRQ_PRIORITY));
+ nvicEnableVector(STM32_UART5_NUMBER, STM32_UART_UART5_IRQ_PRIORITY);
uartp->dmamode |= STM32_DMA_CR_CHSEL(UART5_RX_DMA_CHANNEL) |
STM32_DMA_CR_PL(STM32_UART_UART5_DMA_PRIORITY);
}
@@ -654,20 +611,19 @@ void uart_lld_start(UARTDriver *uartp) { #if STM32_UART_USE_USART6
if (&UARTD6 == uartp) {
- bool_t b;
+ bool b;
b = dmaStreamAllocate(uartp->dmarx,
STM32_UART_USART6_IRQ_PRIORITY,
(stm32_dmaisr_t)uart_lld_serve_rx_end_irq,
(void *)uartp);
- chDbgAssert(!b, "uart_lld_start(), #11", "stream already allocated");
+ osalDbgAssert(!b, "stream already allocated");
b = dmaStreamAllocate(uartp->dmatx,
STM32_UART_USART6_IRQ_PRIORITY,
(stm32_dmaisr_t)uart_lld_serve_tx_end_irq,
(void *)uartp);
- chDbgAssert(!b, "uart_lld_start(), #12", "stream already allocated");
+ osalDbgAssert(!b, "stream already allocated");
rccEnableUSART6(FALSE);
- nvicEnableVector(STM32_USART6_NUMBER,
- CORTEX_PRIORITY_MASK(STM32_UART_USART6_IRQ_PRIORITY));
+ nvicEnableVector(STM32_USART6_NUMBER, STM32_UART_USART6_IRQ_PRIORITY);
uartp->dmamode |= STM32_DMA_CR_CHSEL(USART6_RX_DMA_CHANNEL) |
STM32_DMA_CR_PL(STM32_UART_USART6_DMA_PRIORITY);
}
diff --git a/os/hal/platforms/STM32/USARTv1/uart_lld.h b/os/hal/platforms/STM32/USARTv1/uart_lld.h index ba8f00f1e..6c7df15e0 100644 --- a/os/hal/platforms/STM32/USARTv1/uart_lld.h +++ b/os/hal/platforms/STM32/USARTv1/uart_lld.h @@ -259,7 +259,7 @@ * @note This option is only available on platforms with enhanced DMA.
*/
#if !defined(STM32_UART_UART4_RX_DMA_STREAM) || defined(__DOXYGEN__)
-#define STM32_UART_UART4_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2)
+#define STM32_UART_UART4_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2)
#endif
/**
@@ -267,7 +267,7 @@ * @note This option is only available on platforms with enhanced DMA.
*/
#if !defined(STM32_UART_UART4_TX_DMA_STREAM) || defined(__DOXYGEN__)
-#define STM32_UART_UART4_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4)
+#define STM32_UART_UART4_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4)
#endif
/**
@@ -275,7 +275,7 @@ * @note This option is only available on platforms with enhanced DMA.
*/
#if !defined(STM32_UART_UART5_RX_DMA_STREAM) || defined(__DOXYGEN__)
-#define STM32_UART_UART5_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0)
+#define STM32_UART_UART5_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0)
#endif
/**
@@ -283,7 +283,7 @@ * @note This option is only available on platforms with enhanced DMA.
*/
#if !defined(STM32_UART_UART5_TX_DMA_STREAM) || defined(__DOXYGEN__)
-#define STM32_UART_UART5_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7)
+#define STM32_UART_UART5_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7)
#endif
/**
diff --git a/testhal/STM32F4xx/ADC/mcuconf.h b/testhal/STM32F4xx/ADC/mcuconf.h index 08027d99b..dd12624ac 100644 --- a/testhal/STM32F4xx/ADC/mcuconf.h +++ b/testhal/STM32F4xx/ADC/mcuconf.h @@ -245,6 +245,8 @@ #define STM32_UART_USE_USART1 FALSE
#define STM32_UART_USE_USART2 FALSE
#define STM32_UART_USE_USART3 FALSE
+#define STM32_UART_USE_UART4 FALSE
+#define STM32_UART_USE_UART5 FALSE
#define STM32_UART_USE_USART6 FALSE
#define STM32_UART_USART1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 5)
#define STM32_UART_USART1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7)
@@ -252,15 +254,23 @@ #define STM32_UART_USART2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6)
#define STM32_UART_USART3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 1)
#define STM32_UART_USART3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3)
+#define STM32_UART_UART4_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2)
+#define STM32_UART_UART4_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4)
+#define STM32_UART_UART5_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0)
+#define STM32_UART_UART5_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7)
#define STM32_UART_USART6_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 2)
#define STM32_UART_USART6_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7)
#define STM32_UART_USART1_IRQ_PRIORITY 12
#define STM32_UART_USART2_IRQ_PRIORITY 12
#define STM32_UART_USART3_IRQ_PRIORITY 12
+#define STM32_UART_UART4_IRQ_PRIORITY 12
+#define STM32_UART_UART5_IRQ_PRIORITY 12
#define STM32_UART_USART6_IRQ_PRIORITY 12
#define STM32_UART_USART1_DMA_PRIORITY 0
#define STM32_UART_USART2_DMA_PRIORITY 0
#define STM32_UART_USART3_DMA_PRIORITY 0
+#define STM32_UART_UART4_DMA_PRIORITY 0
+#define STM32_UART_UART5_DMA_PRIORITY 0
#define STM32_UART_USART6_DMA_PRIORITY 0
#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure")
diff --git a/testhal/STM32F4xx/CAN/mcuconf.h b/testhal/STM32F4xx/CAN/mcuconf.h index b1116bdeb..9e6b55a96 100644 --- a/testhal/STM32F4xx/CAN/mcuconf.h +++ b/testhal/STM32F4xx/CAN/mcuconf.h @@ -245,6 +245,8 @@ #define STM32_UART_USE_USART1 FALSE
#define STM32_UART_USE_USART2 FALSE
#define STM32_UART_USE_USART3 FALSE
+#define STM32_UART_USE_UART4 FALSE
+#define STM32_UART_USE_UART5 FALSE
#define STM32_UART_USE_USART6 FALSE
#define STM32_UART_USART1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 5)
#define STM32_UART_USART1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7)
@@ -252,15 +254,23 @@ #define STM32_UART_USART2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6)
#define STM32_UART_USART3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 1)
#define STM32_UART_USART3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3)
+#define STM32_UART_UART4_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2)
+#define STM32_UART_UART4_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4)
+#define STM32_UART_UART5_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0)
+#define STM32_UART_UART5_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7)
#define STM32_UART_USART6_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 2)
#define STM32_UART_USART6_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7)
#define STM32_UART_USART1_IRQ_PRIORITY 12
#define STM32_UART_USART2_IRQ_PRIORITY 12
#define STM32_UART_USART3_IRQ_PRIORITY 12
+#define STM32_UART_UART4_IRQ_PRIORITY 12
+#define STM32_UART_UART5_IRQ_PRIORITY 12
#define STM32_UART_USART6_IRQ_PRIORITY 12
#define STM32_UART_USART1_DMA_PRIORITY 0
#define STM32_UART_USART2_DMA_PRIORITY 0
#define STM32_UART_USART3_DMA_PRIORITY 0
+#define STM32_UART_UART4_DMA_PRIORITY 0
+#define STM32_UART_UART5_DMA_PRIORITY 0
#define STM32_UART_USART6_DMA_PRIORITY 0
#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure")
diff --git a/testhal/STM32F4xx/DMA_STORM/mcuconf.h b/testhal/STM32F4xx/DMA_STORM/mcuconf.h index fcacbedb4..03e8ba816 100644 --- a/testhal/STM32F4xx/DMA_STORM/mcuconf.h +++ b/testhal/STM32F4xx/DMA_STORM/mcuconf.h @@ -245,6 +245,8 @@ #define STM32_UART_USE_USART1 FALSE
#define STM32_UART_USE_USART2 FALSE
#define STM32_UART_USE_USART3 FALSE
+#define STM32_UART_USE_UART4 FALSE
+#define STM32_UART_USE_UART5 FALSE
#define STM32_UART_USE_USART6 FALSE
#define STM32_UART_USART1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 5)
#define STM32_UART_USART1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7)
@@ -252,15 +254,23 @@ #define STM32_UART_USART2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6)
#define STM32_UART_USART3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 1)
#define STM32_UART_USART3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3)
+#define STM32_UART_UART4_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2)
+#define STM32_UART_UART4_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4)
+#define STM32_UART_UART5_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0)
+#define STM32_UART_UART5_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7)
#define STM32_UART_USART6_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 2)
#define STM32_UART_USART6_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7)
#define STM32_UART_USART1_IRQ_PRIORITY 12
#define STM32_UART_USART2_IRQ_PRIORITY 12
#define STM32_UART_USART3_IRQ_PRIORITY 12
+#define STM32_UART_UART4_IRQ_PRIORITY 12
+#define STM32_UART_UART5_IRQ_PRIORITY 12
#define STM32_UART_USART6_IRQ_PRIORITY 12
#define STM32_UART_USART1_DMA_PRIORITY 0
#define STM32_UART_USART2_DMA_PRIORITY 0
#define STM32_UART_USART3_DMA_PRIORITY 0
+#define STM32_UART_UART4_DMA_PRIORITY 0
+#define STM32_UART_UART5_DMA_PRIORITY 0
#define STM32_UART_USART6_DMA_PRIORITY 0
#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure")
diff --git a/testhal/STM32F4xx/EXT/mcuconf.h b/testhal/STM32F4xx/EXT/mcuconf.h index d5c5e8334..0ef90c517 100644 --- a/testhal/STM32F4xx/EXT/mcuconf.h +++ b/testhal/STM32F4xx/EXT/mcuconf.h @@ -245,6 +245,8 @@ #define STM32_UART_USE_USART1 FALSE
#define STM32_UART_USE_USART2 FALSE
#define STM32_UART_USE_USART3 FALSE
+#define STM32_UART_USE_UART4 FALSE
+#define STM32_UART_USE_UART5 FALSE
#define STM32_UART_USE_USART6 FALSE
#define STM32_UART_USART1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 5)
#define STM32_UART_USART1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7)
@@ -252,15 +254,23 @@ #define STM32_UART_USART2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6)
#define STM32_UART_USART3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 1)
#define STM32_UART_USART3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3)
+#define STM32_UART_UART4_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2)
+#define STM32_UART_UART4_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4)
+#define STM32_UART_UART5_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0)
+#define STM32_UART_UART5_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7)
#define STM32_UART_USART6_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 2)
#define STM32_UART_USART6_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7)
#define STM32_UART_USART1_IRQ_PRIORITY 12
#define STM32_UART_USART2_IRQ_PRIORITY 12
#define STM32_UART_USART3_IRQ_PRIORITY 12
+#define STM32_UART_UART4_IRQ_PRIORITY 12
+#define STM32_UART_UART5_IRQ_PRIORITY 12
#define STM32_UART_USART6_IRQ_PRIORITY 12
#define STM32_UART_USART1_DMA_PRIORITY 0
#define STM32_UART_USART2_DMA_PRIORITY 0
#define STM32_UART_USART3_DMA_PRIORITY 0
+#define STM32_UART_UART4_DMA_PRIORITY 0
+#define STM32_UART_UART5_DMA_PRIORITY 0
#define STM32_UART_USART6_DMA_PRIORITY 0
#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure")
diff --git a/testhal/STM32F4xx/GPT/mcuconf.h b/testhal/STM32F4xx/GPT/mcuconf.h index 4ae14a194..570b69f4a 100644 --- a/testhal/STM32F4xx/GPT/mcuconf.h +++ b/testhal/STM32F4xx/GPT/mcuconf.h @@ -245,6 +245,8 @@ #define STM32_UART_USE_USART1 FALSE
#define STM32_UART_USE_USART2 FALSE
#define STM32_UART_USE_USART3 FALSE
+#define STM32_UART_USE_UART4 FALSE
+#define STM32_UART_USE_UART5 FALSE
#define STM32_UART_USE_USART6 FALSE
#define STM32_UART_USART1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 5)
#define STM32_UART_USART1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7)
@@ -252,15 +254,23 @@ #define STM32_UART_USART2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6)
#define STM32_UART_USART3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 1)
#define STM32_UART_USART3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3)
+#define STM32_UART_UART4_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2)
+#define STM32_UART_UART4_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4)
+#define STM32_UART_UART5_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0)
+#define STM32_UART_UART5_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7)
#define STM32_UART_USART6_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 2)
#define STM32_UART_USART6_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7)
#define STM32_UART_USART1_IRQ_PRIORITY 12
#define STM32_UART_USART2_IRQ_PRIORITY 12
#define STM32_UART_USART3_IRQ_PRIORITY 12
+#define STM32_UART_UART4_IRQ_PRIORITY 12
+#define STM32_UART_UART5_IRQ_PRIORITY 12
#define STM32_UART_USART6_IRQ_PRIORITY 12
#define STM32_UART_USART1_DMA_PRIORITY 0
#define STM32_UART_USART2_DMA_PRIORITY 0
#define STM32_UART_USART3_DMA_PRIORITY 0
+#define STM32_UART_UART4_DMA_PRIORITY 0
+#define STM32_UART_UART5_DMA_PRIORITY 0
#define STM32_UART_USART6_DMA_PRIORITY 0
#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure")
diff --git a/testhal/STM32F4xx/I2C/mcuconf.h b/testhal/STM32F4xx/I2C/mcuconf.h index 5cca0bafd..d81560814 100644 --- a/testhal/STM32F4xx/I2C/mcuconf.h +++ b/testhal/STM32F4xx/I2C/mcuconf.h @@ -245,6 +245,8 @@ #define STM32_UART_USE_USART1 FALSE
#define STM32_UART_USE_USART2 FALSE
#define STM32_UART_USE_USART3 FALSE
+#define STM32_UART_USE_UART4 FALSE
+#define STM32_UART_USE_UART5 FALSE
#define STM32_UART_USE_USART6 FALSE
#define STM32_UART_USART1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 5)
#define STM32_UART_USART1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7)
@@ -252,15 +254,23 @@ #define STM32_UART_USART2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6)
#define STM32_UART_USART3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 1)
#define STM32_UART_USART3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3)
+#define STM32_UART_UART4_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2)
+#define STM32_UART_UART4_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4)
+#define STM32_UART_UART5_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0)
+#define STM32_UART_UART5_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7)
#define STM32_UART_USART6_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 2)
#define STM32_UART_USART6_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7)
#define STM32_UART_USART1_IRQ_PRIORITY 12
#define STM32_UART_USART2_IRQ_PRIORITY 12
#define STM32_UART_USART3_IRQ_PRIORITY 12
+#define STM32_UART_UART4_IRQ_PRIORITY 12
+#define STM32_UART_UART5_IRQ_PRIORITY 12
#define STM32_UART_USART6_IRQ_PRIORITY 12
#define STM32_UART_USART1_DMA_PRIORITY 0
#define STM32_UART_USART2_DMA_PRIORITY 0
#define STM32_UART_USART3_DMA_PRIORITY 0
+#define STM32_UART_UART4_DMA_PRIORITY 0
+#define STM32_UART_UART5_DMA_PRIORITY 0
#define STM32_UART_USART6_DMA_PRIORITY 0
#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure")
diff --git a/testhal/STM32F4xx/IRQ_STORM/mcuconf.h b/testhal/STM32F4xx/IRQ_STORM/mcuconf.h index 5dde3c61d..a1290a249 100644 --- a/testhal/STM32F4xx/IRQ_STORM/mcuconf.h +++ b/testhal/STM32F4xx/IRQ_STORM/mcuconf.h @@ -245,6 +245,8 @@ #define STM32_UART_USE_USART1 FALSE
#define STM32_UART_USE_USART2 FALSE
#define STM32_UART_USE_USART3 FALSE
+#define STM32_UART_USE_UART4 FALSE
+#define STM32_UART_USE_UART5 FALSE
#define STM32_UART_USE_USART6 FALSE
#define STM32_UART_USART1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 5)
#define STM32_UART_USART1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7)
@@ -252,15 +254,23 @@ #define STM32_UART_USART2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6)
#define STM32_UART_USART3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 1)
#define STM32_UART_USART3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3)
+#define STM32_UART_UART4_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2)
+#define STM32_UART_UART4_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4)
+#define STM32_UART_UART5_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0)
+#define STM32_UART_UART5_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7)
#define STM32_UART_USART6_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 2)
#define STM32_UART_USART6_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7)
#define STM32_UART_USART1_IRQ_PRIORITY 12
#define STM32_UART_USART2_IRQ_PRIORITY 12
#define STM32_UART_USART3_IRQ_PRIORITY 12
+#define STM32_UART_UART4_IRQ_PRIORITY 12
+#define STM32_UART_UART5_IRQ_PRIORITY 12
#define STM32_UART_USART6_IRQ_PRIORITY 12
#define STM32_UART_USART1_DMA_PRIORITY 0
#define STM32_UART_USART2_DMA_PRIORITY 0
#define STM32_UART_USART3_DMA_PRIORITY 0
+#define STM32_UART_UART4_DMA_PRIORITY 0
+#define STM32_UART_UART5_DMA_PRIORITY 0
#define STM32_UART_USART6_DMA_PRIORITY 0
#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure")
diff --git a/testhal/STM32F4xx/IRQ_STORM_FPU/mcuconf.h b/testhal/STM32F4xx/IRQ_STORM_FPU/mcuconf.h index 5dde3c61d..a1290a249 100644 --- a/testhal/STM32F4xx/IRQ_STORM_FPU/mcuconf.h +++ b/testhal/STM32F4xx/IRQ_STORM_FPU/mcuconf.h @@ -245,6 +245,8 @@ #define STM32_UART_USE_USART1 FALSE
#define STM32_UART_USE_USART2 FALSE
#define STM32_UART_USE_USART3 FALSE
+#define STM32_UART_USE_UART4 FALSE
+#define STM32_UART_USE_UART5 FALSE
#define STM32_UART_USE_USART6 FALSE
#define STM32_UART_USART1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 5)
#define STM32_UART_USART1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7)
@@ -252,15 +254,23 @@ #define STM32_UART_USART2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6)
#define STM32_UART_USART3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 1)
#define STM32_UART_USART3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3)
+#define STM32_UART_UART4_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2)
+#define STM32_UART_UART4_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4)
+#define STM32_UART_UART5_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0)
+#define STM32_UART_UART5_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7)
#define STM32_UART_USART6_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 2)
#define STM32_UART_USART6_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7)
#define STM32_UART_USART1_IRQ_PRIORITY 12
#define STM32_UART_USART2_IRQ_PRIORITY 12
#define STM32_UART_USART3_IRQ_PRIORITY 12
+#define STM32_UART_UART4_IRQ_PRIORITY 12
+#define STM32_UART_UART5_IRQ_PRIORITY 12
#define STM32_UART_USART6_IRQ_PRIORITY 12
#define STM32_UART_USART1_DMA_PRIORITY 0
#define STM32_UART_USART2_DMA_PRIORITY 0
#define STM32_UART_USART3_DMA_PRIORITY 0
+#define STM32_UART_UART4_DMA_PRIORITY 0
+#define STM32_UART_UART5_DMA_PRIORITY 0
#define STM32_UART_USART6_DMA_PRIORITY 0
#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure")
diff --git a/testhal/STM32F4xx/PWM-ICU/mcuconf.h b/testhal/STM32F4xx/PWM-ICU/mcuconf.h index 2d5293c4e..4ff4bd0ce 100644 --- a/testhal/STM32F4xx/PWM-ICU/mcuconf.h +++ b/testhal/STM32F4xx/PWM-ICU/mcuconf.h @@ -245,6 +245,8 @@ #define STM32_UART_USE_USART1 FALSE
#define STM32_UART_USE_USART2 FALSE
#define STM32_UART_USE_USART3 FALSE
+#define STM32_UART_USE_UART4 FALSE
+#define STM32_UART_USE_UART5 FALSE
#define STM32_UART_USE_USART6 FALSE
#define STM32_UART_USART1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 5)
#define STM32_UART_USART1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7)
@@ -252,15 +254,23 @@ #define STM32_UART_USART2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6)
#define STM32_UART_USART3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 1)
#define STM32_UART_USART3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3)
+#define STM32_UART_UART4_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2)
+#define STM32_UART_UART4_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4)
+#define STM32_UART_UART5_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0)
+#define STM32_UART_UART5_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7)
#define STM32_UART_USART6_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 2)
#define STM32_UART_USART6_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7)
#define STM32_UART_USART1_IRQ_PRIORITY 12
#define STM32_UART_USART2_IRQ_PRIORITY 12
#define STM32_UART_USART3_IRQ_PRIORITY 12
+#define STM32_UART_UART4_IRQ_PRIORITY 12
+#define STM32_UART_UART5_IRQ_PRIORITY 12
#define STM32_UART_USART6_IRQ_PRIORITY 12
#define STM32_UART_USART1_DMA_PRIORITY 0
#define STM32_UART_USART2_DMA_PRIORITY 0
#define STM32_UART_USART3_DMA_PRIORITY 0
+#define STM32_UART_UART4_DMA_PRIORITY 0
+#define STM32_UART_UART5_DMA_PRIORITY 0
#define STM32_UART_USART6_DMA_PRIORITY 0
#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure")
diff --git a/testhal/STM32F4xx/RTC/mcuconf.h b/testhal/STM32F4xx/RTC/mcuconf.h index 23faee4f0..77aaa1b61 100644 --- a/testhal/STM32F4xx/RTC/mcuconf.h +++ b/testhal/STM32F4xx/RTC/mcuconf.h @@ -245,6 +245,8 @@ #define STM32_UART_USE_USART1 FALSE
#define STM32_UART_USE_USART2 FALSE
#define STM32_UART_USE_USART3 FALSE
+#define STM32_UART_USE_UART4 FALSE
+#define STM32_UART_USE_UART5 FALSE
#define STM32_UART_USE_USART6 FALSE
#define STM32_UART_USART1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 5)
#define STM32_UART_USART1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7)
@@ -252,15 +254,23 @@ #define STM32_UART_USART2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6)
#define STM32_UART_USART3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 1)
#define STM32_UART_USART3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3)
+#define STM32_UART_UART4_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2)
+#define STM32_UART_UART4_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4)
+#define STM32_UART_UART5_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0)
+#define STM32_UART_UART5_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7)
#define STM32_UART_USART6_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 2)
#define STM32_UART_USART6_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7)
#define STM32_UART_USART1_IRQ_PRIORITY 12
#define STM32_UART_USART2_IRQ_PRIORITY 12
#define STM32_UART_USART3_IRQ_PRIORITY 12
+#define STM32_UART_UART4_IRQ_PRIORITY 12
+#define STM32_UART_UART5_IRQ_PRIORITY 12
#define STM32_UART_USART6_IRQ_PRIORITY 12
#define STM32_UART_USART1_DMA_PRIORITY 0
#define STM32_UART_USART2_DMA_PRIORITY 0
#define STM32_UART_USART3_DMA_PRIORITY 0
+#define STM32_UART_UART4_DMA_PRIORITY 0
+#define STM32_UART_UART5_DMA_PRIORITY 0
#define STM32_UART_USART6_DMA_PRIORITY 0
#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure")
diff --git a/testhal/STM32F4xx/SDC/mcuconf.h b/testhal/STM32F4xx/SDC/mcuconf.h index 839b5665a..174a9fe20 100644 --- a/testhal/STM32F4xx/SDC/mcuconf.h +++ b/testhal/STM32F4xx/SDC/mcuconf.h @@ -245,6 +245,8 @@ #define STM32_UART_USE_USART1 FALSE
#define STM32_UART_USE_USART2 FALSE
#define STM32_UART_USE_USART3 FALSE
+#define STM32_UART_USE_UART4 FALSE
+#define STM32_UART_USE_UART5 FALSE
#define STM32_UART_USE_USART6 FALSE
#define STM32_UART_USART1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 5)
#define STM32_UART_USART1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7)
@@ -252,15 +254,23 @@ #define STM32_UART_USART2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6)
#define STM32_UART_USART3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 1)
#define STM32_UART_USART3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3)
+#define STM32_UART_UART4_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2)
+#define STM32_UART_UART4_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4)
+#define STM32_UART_UART5_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0)
+#define STM32_UART_UART5_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7)
#define STM32_UART_USART6_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 2)
#define STM32_UART_USART6_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7)
#define STM32_UART_USART1_IRQ_PRIORITY 12
#define STM32_UART_USART2_IRQ_PRIORITY 12
#define STM32_UART_USART3_IRQ_PRIORITY 12
+#define STM32_UART_UART4_IRQ_PRIORITY 12
+#define STM32_UART_UART5_IRQ_PRIORITY 12
#define STM32_UART_USART6_IRQ_PRIORITY 12
#define STM32_UART_USART1_DMA_PRIORITY 0
#define STM32_UART_USART2_DMA_PRIORITY 0
#define STM32_UART_USART3_DMA_PRIORITY 0
+#define STM32_UART_UART4_DMA_PRIORITY 0
+#define STM32_UART_UART5_DMA_PRIORITY 0
#define STM32_UART_USART6_DMA_PRIORITY 0
#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure")
diff --git a/testhal/STM32F4xx/SPI/.project b/testhal/STM32F4xx/SPI/.project index effebe09e..cbee7f6e6 100644 --- a/testhal/STM32F4xx/SPI/.project +++ b/testhal/STM32F4xx/SPI/.project @@ -27,7 +27,7 @@ <link>
<name>board</name>
<type>2</type>
- <locationURI>CHIBIOS/boards/ST_STM32F4_DISCOVERY</locationURI>
+ <locationURI>CHIBIOS/os/hal/boards/ST_STM32F4_DISCOVERY</locationURI>
</link>
<link>
<name>os</name>
diff --git a/testhal/STM32F4xx/SPI/Makefile b/testhal/STM32F4xx/SPI/Makefile index 86de6d81c..814be9864 100644 --- a/testhal/STM32F4xx/SPI/Makefile +++ b/testhal/STM32F4xx/SPI/Makefile @@ -65,12 +65,13 @@ PROJECT = ch # Imported source files and paths
CHIBIOS = ../../..
-include $(CHIBIOS)/boards/ST_STM32F4_DISCOVERY/board.mk
-include $(CHIBIOS)/os/hal/platforms/STM32F4xx/platform.mk
include $(CHIBIOS)/os/hal/hal.mk
-include $(CHIBIOS)/os/ports/GCC/ARMCMx/STM32F4xx/port.mk
-include $(CHIBIOS)/os/kernel/kernel.mk
-include $(CHIBIOS)/test/test.mk
+include $(CHIBIOS)/os/hal/osal/chibios/osal.mk
+include $(CHIBIOS)/os/hal/boards/ST_STM32F4_DISCOVERY/board.mk
+include $(CHIBIOS)/os/hal/platforms/STM32F4xx/platform.mk
+include $(CHIBIOS)/os/rt/rt.mk
+include $(CHIBIOS)/os/rt/ports/ARMCMx/devices/STM32F4xx/port.mk
+#include $(CHIBIOS)/test/test.mk
# Define linker script file here
LDSCRIPT= $(PORTLD)/STM32F407xG.ld
@@ -82,9 +83,9 @@ CSRC = $(PORTSRC) \ $(KERNSRC) \
$(TESTSRC) \
$(HALSRC) \
+ $(OSALSRC) \
$(PLATFORMSRC) \
$(BOARDSRC) \
- $(CHIBIOS)/os/various/chprintf.c \
main.c
# C++ sources that can be compiled in ARM or THUMB mode depending on the global
@@ -115,7 +116,7 @@ TCPPSRC = ASMSRC = $(PORTASM)
INCDIR = $(PORTINC) $(KERNINC) $(TESTINC) \
- $(HALINC) $(PLATFORMINC) $(BOARDINC) \
+ $(HALINC) $(OSALINC) $(PLATFORMINC) $(BOARDINC) \
$(CHIBIOS)/os/various
#
@@ -208,8 +209,10 @@ ULIBS = ifeq ($(USE_FPU),yes)
USE_OPT += -mfloat-abi=softfp -mfpu=fpv4-sp-d16 -fsingle-precision-constant
DDEFS += -DCORTEX_USE_FPU=TRUE
+ DADEFS += -DCORTEX_USE_FPU=TRUE
else
DDEFS += -DCORTEX_USE_FPU=FALSE
+ DADEFS += -DCORTEX_USE_FPU=FALSE
endif
ifeq ($(USE_FWLIB),yes)
@@ -219,4 +222,4 @@ ifeq ($(USE_FWLIB),yes) USE_OPT += -DUSE_STDPERIPH_DRIVER
endif
-include $(CHIBIOS)/os/ports/GCC/ARMCMx/rules.mk
+include $(CHIBIOS)/os/rt/ports/ARMCMx/compilers/GCC/rules.mk
diff --git a/testhal/STM32F4xx/SPI/chconf.h b/testhal/STM32F4xx/SPI/chconf.h index 2e6fcc6ee..1262f2fc5 100644 --- a/testhal/STM32F4xx/SPI/chconf.h +++ b/testhal/STM32F4xx/SPI/chconf.h @@ -40,8 +40,29 @@ * @details Frequency of the system timer that drives the system ticks. This
* setting also defines the system tick time unit.
*/
-#if !defined(CH_FREQUENCY) || defined(__DOXYGEN__)
-#define CH_FREQUENCY 1000
+#if !defined(CH_CFG_ST_FREQUENCY) || defined(__DOXYGEN__)
+#define CH_CFG_ST_FREQUENCY 10000
+#endif
+
+/**
+ * @brief Realtime Counter frequency.
+ * @details Frequency of the system counter used for realtime delays and
+ * measurements.
+ */
+#if !defined(CH_CFG_RTC_FREQUENCY) || defined(__DOXYGEN__)
+#define CH_CFG_RTC_FREQUENCY 168000000
+#endif
+
+/**
+ * @brief Time delta constant for the tick-less mode.
+ * @note If this value is zero then the system uses the classic
+ * periodic tick. This value represents the minimum number
+ * of ticks that is safe to specify in a timeout directive.
+ * The value one is not valid, timeouts are rounded up to
+ * this value.
+ */
+#if !defined(CH_CFG_TIMEDELTA) || defined(__DOXYGEN__)
+#define CH_CFG_TIMEDELTA 2
#endif
/**
@@ -51,12 +72,13 @@ * disables the preemption for threads with equal priority and the
* round robin becomes cooperative. Note that higher priority
* threads can still preempt, the kernel is always preemptive.
- *
* @note Disabling the round robin preemption makes the kernel more compact
* and generally faster.
+ * @note The round robin preemption is not supported in tickless mode and
+ * must be set to zero in that case.
*/
-#if !defined(CH_TIME_QUANTUM) || defined(__DOXYGEN__)
-#define CH_TIME_QUANTUM 20
+#if !defined(CH_CFG_TIME_QUANTUM) || defined(__DOXYGEN__)
+#define CH_CFG_TIME_QUANTUM 0
#endif
/**
@@ -68,27 +90,20 @@ *
* @note In order to let the OS manage the whole RAM the linker script must
* provide the @p __heap_base__ and @p __heap_end__ symbols.
- * @note Requires @p CH_USE_MEMCORE.
+ * @note Requires @p CH_CFG_USE_MEMCORE.
*/
-#if !defined(CH_MEMCORE_SIZE) || defined(__DOXYGEN__)
-#define CH_MEMCORE_SIZE 0
+#if !defined(CH_CFG_MEMCORE_SIZE) || defined(__DOXYGEN__)
+#define CH_CFG_MEMCORE_SIZE 0
#endif
/**
* @brief Idle thread automatic spawn suppression.
* @details When this option is activated the function @p chSysInit()
- * does not spawn the idle thread automatically. The application has
- * then the responsibility to do one of the following:
- * - Spawn a custom idle thread at priority @p IDLEPRIO.
- * - Change the main() thread priority to @p IDLEPRIO then enter
- * an endless loop. In this scenario the @p main() thread acts as
- * the idle thread.
- * .
- * @note Unless an idle thread is spawned the @p main() thread must not
- * enter a sleep state.
- */
-#if !defined(CH_NO_IDLE_THREAD) || defined(__DOXYGEN__)
-#define CH_NO_IDLE_THREAD FALSE
+ * does not spawn the idle thread. The application @p main()
+ * function becomes the idle thread and must implement an
+ * infinite loop. */
+#if !defined(CH_CFG_NO_IDLE_THREAD) || defined(__DOXYGEN__)
+#define CH_CFG_NO_IDLE_THREAD FALSE
#endif
/** @} */
@@ -108,8 +123,8 @@ * @note This is not related to the compiler optimization options.
* @note The default is @p TRUE.
*/
-#if !defined(CH_OPTIMIZE_SPEED) || defined(__DOXYGEN__)
-#define CH_OPTIMIZE_SPEED TRUE
+#if !defined(CH_CFG_OPTIMIZE_SPEED) || defined(__DOXYGEN__)
+#define CH_CFG_OPTIMIZE_SPEED TRUE
#endif
/** @} */
@@ -122,13 +137,24 @@ /*===========================================================================*/
/**
+ * @brief Time Measurement APIs.
+ * @details If enabled then the time measurement APIs are included in
+ * the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#if !defined(CH_CFG_USE_TM) || defined(__DOXYGEN__)
+#define CH_CFG_USE_TM TRUE
+#endif
+
+/**
* @brief Threads registry APIs.
* @details If enabled then the registry APIs are included in the kernel.
*
* @note The default is @p TRUE.
*/
-#if !defined(CH_USE_REGISTRY) || defined(__DOXYGEN__)
-#define CH_USE_REGISTRY TRUE
+#if !defined(CH_CFG_USE_REGISTRY) || defined(__DOXYGEN__)
+#define CH_CFG_USE_REGISTRY TRUE
#endif
/**
@@ -138,8 +164,8 @@ *
* @note The default is @p TRUE.
*/
-#if !defined(CH_USE_WAITEXIT) || defined(__DOXYGEN__)
-#define CH_USE_WAITEXIT TRUE
+#if !defined(CH_CFG_USE_WAITEXIT) || defined(__DOXYGEN__)
+#define CH_CFG_USE_WAITEXIT TRUE
#endif
/**
@@ -148,8 +174,8 @@ *
* @note The default is @p TRUE.
*/
-#if !defined(CH_USE_SEMAPHORES) || defined(__DOXYGEN__)
-#define CH_USE_SEMAPHORES TRUE
+#if !defined(CH_CFG_USE_SEMAPHORES) || defined(__DOXYGEN__)
+#define CH_CFG_USE_SEMAPHORES TRUE
#endif
/**
@@ -157,23 +183,12 @@ * @details If enabled then the threads are enqueued on semaphores by
* priority rather than in FIFO order.
*
- * @note The default is @p FALSE. Enable this if you have special requirements.
- * @note Requires @p CH_USE_SEMAPHORES.
- */
-#if !defined(CH_USE_SEMAPHORES_PRIORITY) || defined(__DOXYGEN__)
-#define CH_USE_SEMAPHORES_PRIORITY FALSE
-#endif
-
-/**
- * @brief Atomic semaphore API.
- * @details If enabled then the semaphores the @p chSemSignalWait() API
- * is included in the kernel.
- *
- * @note The default is @p TRUE.
- * @note Requires @p CH_USE_SEMAPHORES.
+ * @note The default is @p FALSE. Enable this if you have special
+ * requirements.
+ * @note Requires @p CH_CFG_USE_SEMAPHORES.
*/
-#if !defined(CH_USE_SEMSW) || defined(__DOXYGEN__)
-#define CH_USE_SEMSW TRUE
+#if !defined(CH_CFG_USE_SEMAPHORES_PRIORITY) || defined(__DOXYGEN__)
+#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE
#endif
/**
@@ -182,8 +197,8 @@ *
* @note The default is @p TRUE.
*/
-#if !defined(CH_USE_MUTEXES) || defined(__DOXYGEN__)
-#define CH_USE_MUTEXES TRUE
+#if !defined(CH_CFG_USE_MUTEXES) || defined(__DOXYGEN__)
+#define CH_CFG_USE_MUTEXES TRUE
#endif
/**
@@ -192,10 +207,10 @@ * in the kernel.
*
* @note The default is @p TRUE.
- * @note Requires @p CH_USE_MUTEXES.
+ * @note Requires @p CH_CFG_USE_MUTEXES.
*/
-#if !defined(CH_USE_CONDVARS) || defined(__DOXYGEN__)
-#define CH_USE_CONDVARS TRUE
+#if !defined(CH_CFG_USE_CONDVARS) || defined(__DOXYGEN__)
+#define CH_CFG_USE_CONDVARS TRUE
#endif
/**
@@ -204,10 +219,10 @@ * specification are included in the kernel.
*
* @note The default is @p TRUE.
- * @note Requires @p CH_USE_CONDVARS.
+ * @note Requires @p CH_CFG_USE_CONDVARS.
*/
-#if !defined(CH_USE_CONDVARS_TIMEOUT) || defined(__DOXYGEN__)
-#define CH_USE_CONDVARS_TIMEOUT TRUE
+#if !defined(CH_CFG_USE_CONDVARS_TIMEOUT) || defined(__DOXYGEN__)
+#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE
#endif
/**
@@ -216,8 +231,8 @@ *
* @note The default is @p TRUE.
*/
-#if !defined(CH_USE_EVENTS) || defined(__DOXYGEN__)
-#define CH_USE_EVENTS TRUE
+#if !defined(CH_CFG_USE_EVENTS) || defined(__DOXYGEN__)
+#define CH_CFG_USE_EVENTS TRUE
#endif
/**
@@ -226,10 +241,10 @@ * are included in the kernel.
*
* @note The default is @p TRUE.
- * @note Requires @p CH_USE_EVENTS.
+ * @note Requires @p CH_CFG_USE_EVENTS.
*/
-#if !defined(CH_USE_EVENTS_TIMEOUT) || defined(__DOXYGEN__)
-#define CH_USE_EVENTS_TIMEOUT TRUE
+#if !defined(CH_CFG_USE_EVENTS_TIMEOUT) || defined(__DOXYGEN__)
+#define CH_CFG_USE_EVENTS_TIMEOUT TRUE
#endif
/**
@@ -239,8 +254,8 @@ *
* @note The default is @p TRUE.
*/
-#if !defined(CH_USE_MESSAGES) || defined(__DOXYGEN__)
-#define CH_USE_MESSAGES TRUE
+#if !defined(CH_CFG_USE_MESSAGES) || defined(__DOXYGEN__)
+#define CH_CFG_USE_MESSAGES TRUE
#endif
/**
@@ -248,11 +263,12 @@ * @details If enabled then messages are served by priority rather than in
* FIFO order.
*
- * @note The default is @p FALSE. Enable this if you have special requirements.
- * @note Requires @p CH_USE_MESSAGES.
+ * @note The default is @p FALSE. Enable this if you have special
+ * requirements.
+ * @note Requires @p CH_CFG_USE_MESSAGES.
*/
-#if !defined(CH_USE_MESSAGES_PRIORITY) || defined(__DOXYGEN__)
-#define CH_USE_MESSAGES_PRIORITY FALSE
+#if !defined(CH_CFG_USE_MESSAGES_PRIORITY) || defined(__DOXYGEN__)
+#define CH_CFG_USE_MESSAGES_PRIORITY FALSE
#endif
/**
@@ -261,10 +277,10 @@ * included in the kernel.
*
* @note The default is @p TRUE.
- * @note Requires @p CH_USE_SEMAPHORES.
+ * @note Requires @p CH_CFG_USE_SEMAPHORES.
*/
-#if !defined(CH_USE_MAILBOXES) || defined(__DOXYGEN__)
-#define CH_USE_MAILBOXES TRUE
+#if !defined(CH_CFG_USE_MAILBOXES) || defined(__DOXYGEN__)
+#define CH_CFG_USE_MAILBOXES TRUE
#endif
/**
@@ -273,8 +289,8 @@ *
* @note The default is @p TRUE.
*/
-#if !defined(CH_USE_QUEUES) || defined(__DOXYGEN__)
-#define CH_USE_QUEUES TRUE
+#if !defined(CH_CFG_USE_QUEUES) || defined(__DOXYGEN__)
+#define CH_CFG_USE_QUEUES TRUE
#endif
/**
@@ -284,8 +300,8 @@ *
* @note The default is @p TRUE.
*/
-#if !defined(CH_USE_MEMCORE) || defined(__DOXYGEN__)
-#define CH_USE_MEMCORE TRUE
+#if !defined(CH_CFG_USE_MEMCORE) || defined(__DOXYGEN__)
+#define CH_CFG_USE_MEMCORE TRUE
#endif
/**
@@ -294,26 +310,12 @@ * in the kernel.
*
* @note The default is @p TRUE.
- * @note Requires @p CH_USE_MEMCORE and either @p CH_USE_MUTEXES or
- * @p CH_USE_SEMAPHORES.
+ * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or
+ * @p CH_CFG_USE_SEMAPHORES.
* @note Mutexes are recommended.
*/
-#if !defined(CH_USE_HEAP) || defined(__DOXYGEN__)
-#define CH_USE_HEAP TRUE
-#endif
-
-/**
- * @brief C-runtime allocator.
- * @details If enabled the the heap allocator APIs just wrap the C-runtime
- * @p malloc() and @p free() functions.
- *
- * @note The default is @p FALSE.
- * @note Requires @p CH_USE_HEAP.
- * @note The C-runtime may or may not require @p CH_USE_MEMCORE, see the
- * appropriate documentation.
- */
-#if !defined(CH_USE_MALLOC_HEAP) || defined(__DOXYGEN__)
-#define CH_USE_MALLOC_HEAP FALSE
+#if !defined(CH_CFG_USE_HEAP) || defined(__DOXYGEN__)
+#define CH_CFG_USE_HEAP TRUE
#endif
/**
@@ -323,8 +325,8 @@ *
* @note The default is @p TRUE.
*/
-#if !defined(CH_USE_MEMPOOLS) || defined(__DOXYGEN__)
-#define CH_USE_MEMPOOLS TRUE
+#if !defined(CH_CFG_USE_MEMPOOLS) || defined(__DOXYGEN__)
+#define CH_CFG_USE_MEMPOOLS TRUE
#endif
/**
@@ -333,11 +335,11 @@ * in the kernel.
*
* @note The default is @p TRUE.
- * @note Requires @p CH_USE_WAITEXIT.
- * @note Requires @p CH_USE_HEAP and/or @p CH_USE_MEMPOOLS.
+ * @note Requires @p CH_CFG_USE_WAITEXIT.
+ * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS.
*/
-#if !defined(CH_USE_DYNAMIC) || defined(__DOXYGEN__)
-#define CH_USE_DYNAMIC TRUE
+#if !defined(CH_CFG_USE_DYNAMIC) || defined(__DOXYGEN__)
+#define CH_CFG_USE_DYNAMIC TRUE
#endif
/** @} */
@@ -350,6 +352,15 @@ /*===========================================================================*/
/**
+ * @brief Debug option, kernel statistics.
+ *
+ * @note The default is @p FALSE.
+ */
+#if !defined(CH_DBG_STATISTICS) || defined(__DOXYGEN__)
+#define CH_DBG_STATISTICS TRUE
+#endif
+
+/**
* @brief Debug option, system state check.
* @details If enabled the correct call protocol for system APIs is checked
* at runtime.
@@ -357,7 +368,7 @@ * @note The default is @p FALSE.
*/
#if !defined(CH_DBG_SYSTEM_STATE_CHECK) || defined(__DOXYGEN__)
-#define CH_DBG_SYSTEM_STATE_CHECK TRUE
+#define CH_DBG_SYSTEM_STATE_CHECK TRUE
#endif
/**
@@ -368,7 +379,7 @@ * @note The default is @p FALSE.
*/
#if !defined(CH_DBG_ENABLE_CHECKS) || defined(__DOXYGEN__)
-#define CH_DBG_ENABLE_CHECKS TRUE
+#define CH_DBG_ENABLE_CHECKS TRUE
#endif
/**
@@ -380,7 +391,7 @@ * @note The default is @p FALSE.
*/
#if !defined(CH_DBG_ENABLE_ASSERTS) || defined(__DOXYGEN__)
-#define CH_DBG_ENABLE_ASSERTS TRUE
+#define CH_DBG_ENABLE_ASSERTS TRUE
#endif
/**
@@ -391,7 +402,7 @@ * @note The default is @p FALSE.
*/
#if !defined(CH_DBG_ENABLE_TRACE) || defined(__DOXYGEN__)
-#define CH_DBG_ENABLE_TRACE TRUE
+#define CH_DBG_ENABLE_TRACE TRUE
#endif
/**
@@ -405,7 +416,7 @@ * @p panic_msg variable set to @p NULL.
*/
#if !defined(CH_DBG_ENABLE_STACK_CHECK) || defined(__DOXYGEN__)
-#define CH_DBG_ENABLE_STACK_CHECK TRUE
+#define CH_DBG_ENABLE_STACK_CHECK TRUE
#endif
/**
@@ -417,20 +428,20 @@ * @note The default is @p FALSE.
*/
#if !defined(CH_DBG_FILL_THREADS) || defined(__DOXYGEN__)
-#define CH_DBG_FILL_THREADS TRUE
+#define CH_DBG_FILL_THREADS TRUE
#endif
/**
* @brief Debug option, threads profiling.
- * @details If enabled then a field is added to the @p Thread structure that
+ * @details If enabled then a field is added to the @p thread_t structure that
* counts the system ticks occurred while executing the thread.
*
- * @note The default is @p TRUE.
- * @note This debug option is defaulted to TRUE because it is required by
- * some test cases into the test suite.
+ * @note The default is @p FALSE.
+ * @note This debug option is not currently compatible with the
+ * tickless mode.
*/
#if !defined(CH_DBG_THREADS_PROFILING) || defined(__DOXYGEN__)
-#define CH_DBG_THREADS_PROFILING TRUE
+#define CH_DBG_THREADS_PROFILING FALSE
#endif
/** @} */
@@ -444,10 +455,10 @@ /**
* @brief Threads descriptor structure extension.
- * @details User fields added to the end of the @p Thread structure.
+ * @details User fields added to the end of the @p thread_t structure.
*/
-#if !defined(THREAD_EXT_FIELDS) || defined(__DOXYGEN__)
-#define THREAD_EXT_FIELDS \
+#if !defined(CH_CFG_THREAD_EXTRA_FIELDS) || defined(__DOXYGEN__)
+#define CH_CFG_THREAD_EXTRA_FIELDS \
/* Add threads custom fields here.*/
#endif
@@ -458,8 +469,8 @@ * @note It is invoked from within @p chThdInit() and implicitly from all
* the threads creation APIs.
*/
-#if !defined(THREAD_EXT_INIT_HOOK) || defined(__DOXYGEN__)
-#define THREAD_EXT_INIT_HOOK(tp) { \
+#if !defined(CH_CFG_THREAD_INIT_HOOK) || defined(__DOXYGEN__)
+#define CH_CFG_THREAD_INIT_HOOK(tp) { \
/* Add threads initialization code here.*/ \
}
#endif
@@ -472,8 +483,8 @@ * @note It is also invoked when the threads simply return in order to
* terminate.
*/
-#if !defined(THREAD_EXT_EXIT_HOOK) || defined(__DOXYGEN__)
-#define THREAD_EXT_EXIT_HOOK(tp) { \
+#if !defined(CH_CFG_THREAD_EXIT_HOOK) || defined(__DOXYGEN__)
+#define CH_CFG_THREAD_EXIT_HOOK(tp) { \
/* Add threads finalization code here.*/ \
}
#endif
@@ -482,18 +493,40 @@ * @brief Context switch hook.
* @details This hook is invoked just before switching between threads.
*/
-#if !defined(THREAD_CONTEXT_SWITCH_HOOK) || defined(__DOXYGEN__)
-#define THREAD_CONTEXT_SWITCH_HOOK(ntp, otp) { \
+#if !defined(CH_CFG_CONTEXT_SWITCH_HOOK) || defined(__DOXYGEN__)
+#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \
/* System halt code here.*/ \
}
#endif
/**
+ * @brief Idle thread enter hook.
+ * @note This hook is invoked within a critical zone, no OS functions
+ * should be invoked from here.
+ * @note This macro can be used to activate a power saving mode.
+ */
+#if !defined(CH_CFG_IDLE_ENTER_HOOK) || defined(__DOXYGEN__)
+#define CH_CFG_IDLE_ENTER_HOOK() { \
+}
+#endif
+
+/**
+ * @brief Idle thread leave hook.
+ * @note This hook is invoked within a critical zone, no OS functions
+ * should be invoked from here.
+ * @note This macro can be used to deactivate a power saving mode.
+ */
+#if !defined(CH_CFG_IDLE_LEAVE_HOOK) || defined(__DOXYGEN__)
+#define CH_CFG_IDLE_LEAVE_HOOK() { \
+}
+#endif
+
+/**
* @brief Idle Loop hook.
* @details This hook is continuously invoked by the idle thread loop.
*/
-#if !defined(IDLE_LOOP_HOOK) || defined(__DOXYGEN__)
-#define IDLE_LOOP_HOOK() { \
+#if !defined(CH_CFG_IDLE_LOOP_HOOK) || defined(__DOXYGEN__)
+#define CH_CFG_IDLE_LOOP_HOOK() { \
/* Idle loop code here.*/ \
}
#endif
@@ -503,8 +536,8 @@ * @details This hook is invoked in the system tick handler immediately
* after processing the virtual timers queue.
*/
-#if !defined(SYSTEM_TICK_EVENT_HOOK) || defined(__DOXYGEN__)
-#define SYSTEM_TICK_EVENT_HOOK() { \
+#if !defined(CH_CFG_SYSTEM_TICK_HOOK) || defined(__DOXYGEN__)
+#define CH_CFG_SYSTEM_TICK_HOOK() { \
/* System tick event code here.*/ \
}
#endif
@@ -514,8 +547,8 @@ * @details This hook is invoked in case to a system halting error before
* the system is halted.
*/
-#if !defined(SYSTEM_HALT_HOOK) || defined(__DOXYGEN__)
-#define SYSTEM_HALT_HOOK() { \
+#if !defined(CH_CFG_SYSTEM_HALT_HOOK) || defined(__DOXYGEN__)
+#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \
/* System halt code here.*/ \
}
#endif
diff --git a/testhal/STM32F4xx/SPI/halconf.h b/testhal/STM32F4xx/SPI/halconf.h index 3e1cafbbf..461d509b4 100644 --- a/testhal/STM32F4xx/SPI/halconf.h +++ b/testhal/STM32F4xx/SPI/halconf.h @@ -31,13 +31,6 @@ #include "mcuconf.h"
/**
- * @brief Enables the TM subsystem.
- */
-#if !defined(HAL_USE_TM) || defined(__DOXYGEN__)
-#define HAL_USE_TM TRUE
-#endif
-
-/**
* @brief Enables the PAL subsystem.
*/
#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__)
diff --git a/testhal/STM32F4xx/SPI/mcuconf.h b/testhal/STM32F4xx/SPI/mcuconf.h index 531813b1a..839a0d38d 100644 --- a/testhal/STM32F4xx/SPI/mcuconf.h +++ b/testhal/STM32F4xx/SPI/mcuconf.h @@ -245,6 +245,8 @@ #define STM32_UART_USE_USART1 FALSE
#define STM32_UART_USE_USART2 FALSE
#define STM32_UART_USE_USART3 FALSE
+#define STM32_UART_USE_UART4 FALSE
+#define STM32_UART_USE_UART5 FALSE
#define STM32_UART_USE_USART6 FALSE
#define STM32_UART_USART1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 5)
#define STM32_UART_USART1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7)
@@ -252,15 +254,23 @@ #define STM32_UART_USART2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6)
#define STM32_UART_USART3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 1)
#define STM32_UART_USART3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3)
+#define STM32_UART_UART4_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2)
+#define STM32_UART_UART4_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4)
+#define STM32_UART_UART5_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0)
+#define STM32_UART_UART5_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7)
#define STM32_UART_USART6_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 2)
#define STM32_UART_USART6_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7)
#define STM32_UART_USART1_IRQ_PRIORITY 12
#define STM32_UART_USART2_IRQ_PRIORITY 12
#define STM32_UART_USART3_IRQ_PRIORITY 12
+#define STM32_UART_UART4_IRQ_PRIORITY 12
+#define STM32_UART_UART5_IRQ_PRIORITY 12
#define STM32_UART_USART6_IRQ_PRIORITY 12
#define STM32_UART_USART1_DMA_PRIORITY 0
#define STM32_UART_USART2_DMA_PRIORITY 0
#define STM32_UART_USART3_DMA_PRIORITY 0
+#define STM32_UART_UART4_DMA_PRIORITY 0
+#define STM32_UART_UART5_DMA_PRIORITY 0
#define STM32_UART_USART6_DMA_PRIORITY 0
#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure")
diff --git a/testhal/STM32F4xx/UART/.project b/testhal/STM32F4xx/UART/.project index 06e8b52e8..8ba48d6a8 100644 --- a/testhal/STM32F4xx/UART/.project +++ b/testhal/STM32F4xx/UART/.project @@ -27,7 +27,7 @@ <link>
<name>board</name>
<type>2</type>
- <locationURI>CHIBIOS/boards/ST_STM32F4_DISCOVERY</locationURI>
+ <locationURI>CHIBIOS/os/hal/boards/ST_STM32F4_DISCOVERY</locationURI>
</link>
<link>
<name>os</name>
diff --git a/testhal/STM32F4xx/UART/Makefile b/testhal/STM32F4xx/UART/Makefile index 86de6d81c..814be9864 100644 --- a/testhal/STM32F4xx/UART/Makefile +++ b/testhal/STM32F4xx/UART/Makefile @@ -65,12 +65,13 @@ PROJECT = ch # Imported source files and paths
CHIBIOS = ../../..
-include $(CHIBIOS)/boards/ST_STM32F4_DISCOVERY/board.mk
-include $(CHIBIOS)/os/hal/platforms/STM32F4xx/platform.mk
include $(CHIBIOS)/os/hal/hal.mk
-include $(CHIBIOS)/os/ports/GCC/ARMCMx/STM32F4xx/port.mk
-include $(CHIBIOS)/os/kernel/kernel.mk
-include $(CHIBIOS)/test/test.mk
+include $(CHIBIOS)/os/hal/osal/chibios/osal.mk
+include $(CHIBIOS)/os/hal/boards/ST_STM32F4_DISCOVERY/board.mk
+include $(CHIBIOS)/os/hal/platforms/STM32F4xx/platform.mk
+include $(CHIBIOS)/os/rt/rt.mk
+include $(CHIBIOS)/os/rt/ports/ARMCMx/devices/STM32F4xx/port.mk
+#include $(CHIBIOS)/test/test.mk
# Define linker script file here
LDSCRIPT= $(PORTLD)/STM32F407xG.ld
@@ -82,9 +83,9 @@ CSRC = $(PORTSRC) \ $(KERNSRC) \
$(TESTSRC) \
$(HALSRC) \
+ $(OSALSRC) \
$(PLATFORMSRC) \
$(BOARDSRC) \
- $(CHIBIOS)/os/various/chprintf.c \
main.c
# C++ sources that can be compiled in ARM or THUMB mode depending on the global
@@ -115,7 +116,7 @@ TCPPSRC = ASMSRC = $(PORTASM)
INCDIR = $(PORTINC) $(KERNINC) $(TESTINC) \
- $(HALINC) $(PLATFORMINC) $(BOARDINC) \
+ $(HALINC) $(OSALINC) $(PLATFORMINC) $(BOARDINC) \
$(CHIBIOS)/os/various
#
@@ -208,8 +209,10 @@ ULIBS = ifeq ($(USE_FPU),yes)
USE_OPT += -mfloat-abi=softfp -mfpu=fpv4-sp-d16 -fsingle-precision-constant
DDEFS += -DCORTEX_USE_FPU=TRUE
+ DADEFS += -DCORTEX_USE_FPU=TRUE
else
DDEFS += -DCORTEX_USE_FPU=FALSE
+ DADEFS += -DCORTEX_USE_FPU=FALSE
endif
ifeq ($(USE_FWLIB),yes)
@@ -219,4 +222,4 @@ ifeq ($(USE_FWLIB),yes) USE_OPT += -DUSE_STDPERIPH_DRIVER
endif
-include $(CHIBIOS)/os/ports/GCC/ARMCMx/rules.mk
+include $(CHIBIOS)/os/rt/ports/ARMCMx/compilers/GCC/rules.mk
diff --git a/testhal/STM32F4xx/UART/chconf.h b/testhal/STM32F4xx/UART/chconf.h index 2e6fcc6ee..1262f2fc5 100644 --- a/testhal/STM32F4xx/UART/chconf.h +++ b/testhal/STM32F4xx/UART/chconf.h @@ -40,8 +40,29 @@ * @details Frequency of the system timer that drives the system ticks. This
* setting also defines the system tick time unit.
*/
-#if !defined(CH_FREQUENCY) || defined(__DOXYGEN__)
-#define CH_FREQUENCY 1000
+#if !defined(CH_CFG_ST_FREQUENCY) || defined(__DOXYGEN__)
+#define CH_CFG_ST_FREQUENCY 10000
+#endif
+
+/**
+ * @brief Realtime Counter frequency.
+ * @details Frequency of the system counter used for realtime delays and
+ * measurements.
+ */
+#if !defined(CH_CFG_RTC_FREQUENCY) || defined(__DOXYGEN__)
+#define CH_CFG_RTC_FREQUENCY 168000000
+#endif
+
+/**
+ * @brief Time delta constant for the tick-less mode.
+ * @note If this value is zero then the system uses the classic
+ * periodic tick. This value represents the minimum number
+ * of ticks that is safe to specify in a timeout directive.
+ * The value one is not valid, timeouts are rounded up to
+ * this value.
+ */
+#if !defined(CH_CFG_TIMEDELTA) || defined(__DOXYGEN__)
+#define CH_CFG_TIMEDELTA 2
#endif
/**
@@ -51,12 +72,13 @@ * disables the preemption for threads with equal priority and the
* round robin becomes cooperative. Note that higher priority
* threads can still preempt, the kernel is always preemptive.
- *
* @note Disabling the round robin preemption makes the kernel more compact
* and generally faster.
+ * @note The round robin preemption is not supported in tickless mode and
+ * must be set to zero in that case.
*/
-#if !defined(CH_TIME_QUANTUM) || defined(__DOXYGEN__)
-#define CH_TIME_QUANTUM 20
+#if !defined(CH_CFG_TIME_QUANTUM) || defined(__DOXYGEN__)
+#define CH_CFG_TIME_QUANTUM 0
#endif
/**
@@ -68,27 +90,20 @@ *
* @note In order to let the OS manage the whole RAM the linker script must
* provide the @p __heap_base__ and @p __heap_end__ symbols.
- * @note Requires @p CH_USE_MEMCORE.
+ * @note Requires @p CH_CFG_USE_MEMCORE.
*/
-#if !defined(CH_MEMCORE_SIZE) || defined(__DOXYGEN__)
-#define CH_MEMCORE_SIZE 0
+#if !defined(CH_CFG_MEMCORE_SIZE) || defined(__DOXYGEN__)
+#define CH_CFG_MEMCORE_SIZE 0
#endif
/**
* @brief Idle thread automatic spawn suppression.
* @details When this option is activated the function @p chSysInit()
- * does not spawn the idle thread automatically. The application has
- * then the responsibility to do one of the following:
- * - Spawn a custom idle thread at priority @p IDLEPRIO.
- * - Change the main() thread priority to @p IDLEPRIO then enter
- * an endless loop. In this scenario the @p main() thread acts as
- * the idle thread.
- * .
- * @note Unless an idle thread is spawned the @p main() thread must not
- * enter a sleep state.
- */
-#if !defined(CH_NO_IDLE_THREAD) || defined(__DOXYGEN__)
-#define CH_NO_IDLE_THREAD FALSE
+ * does not spawn the idle thread. The application @p main()
+ * function becomes the idle thread and must implement an
+ * infinite loop. */
+#if !defined(CH_CFG_NO_IDLE_THREAD) || defined(__DOXYGEN__)
+#define CH_CFG_NO_IDLE_THREAD FALSE
#endif
/** @} */
@@ -108,8 +123,8 @@ * @note This is not related to the compiler optimization options.
* @note The default is @p TRUE.
*/
-#if !defined(CH_OPTIMIZE_SPEED) || defined(__DOXYGEN__)
-#define CH_OPTIMIZE_SPEED TRUE
+#if !defined(CH_CFG_OPTIMIZE_SPEED) || defined(__DOXYGEN__)
+#define CH_CFG_OPTIMIZE_SPEED TRUE
#endif
/** @} */
@@ -122,13 +137,24 @@ /*===========================================================================*/
/**
+ * @brief Time Measurement APIs.
+ * @details If enabled then the time measurement APIs are included in
+ * the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#if !defined(CH_CFG_USE_TM) || defined(__DOXYGEN__)
+#define CH_CFG_USE_TM TRUE
+#endif
+
+/**
* @brief Threads registry APIs.
* @details If enabled then the registry APIs are included in the kernel.
*
* @note The default is @p TRUE.
*/
-#if !defined(CH_USE_REGISTRY) || defined(__DOXYGEN__)
-#define CH_USE_REGISTRY TRUE
+#if !defined(CH_CFG_USE_REGISTRY) || defined(__DOXYGEN__)
+#define CH_CFG_USE_REGISTRY TRUE
#endif
/**
@@ -138,8 +164,8 @@ *
* @note The default is @p TRUE.
*/
-#if !defined(CH_USE_WAITEXIT) || defined(__DOXYGEN__)
-#define CH_USE_WAITEXIT TRUE
+#if !defined(CH_CFG_USE_WAITEXIT) || defined(__DOXYGEN__)
+#define CH_CFG_USE_WAITEXIT TRUE
#endif
/**
@@ -148,8 +174,8 @@ *
* @note The default is @p TRUE.
*/
-#if !defined(CH_USE_SEMAPHORES) || defined(__DOXYGEN__)
-#define CH_USE_SEMAPHORES TRUE
+#if !defined(CH_CFG_USE_SEMAPHORES) || defined(__DOXYGEN__)
+#define CH_CFG_USE_SEMAPHORES TRUE
#endif
/**
@@ -157,23 +183,12 @@ * @details If enabled then the threads are enqueued on semaphores by
* priority rather than in FIFO order.
*
- * @note The default is @p FALSE. Enable this if you have special requirements.
- * @note Requires @p CH_USE_SEMAPHORES.
- */
-#if !defined(CH_USE_SEMAPHORES_PRIORITY) || defined(__DOXYGEN__)
-#define CH_USE_SEMAPHORES_PRIORITY FALSE
-#endif
-
-/**
- * @brief Atomic semaphore API.
- * @details If enabled then the semaphores the @p chSemSignalWait() API
- * is included in the kernel.
- *
- * @note The default is @p TRUE.
- * @note Requires @p CH_USE_SEMAPHORES.
+ * @note The default is @p FALSE. Enable this if you have special
+ * requirements.
+ * @note Requires @p CH_CFG_USE_SEMAPHORES.
*/
-#if !defined(CH_USE_SEMSW) || defined(__DOXYGEN__)
-#define CH_USE_SEMSW TRUE
+#if !defined(CH_CFG_USE_SEMAPHORES_PRIORITY) || defined(__DOXYGEN__)
+#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE
#endif
/**
@@ -182,8 +197,8 @@ *
* @note The default is @p TRUE.
*/
-#if !defined(CH_USE_MUTEXES) || defined(__DOXYGEN__)
-#define CH_USE_MUTEXES TRUE
+#if !defined(CH_CFG_USE_MUTEXES) || defined(__DOXYGEN__)
+#define CH_CFG_USE_MUTEXES TRUE
#endif
/**
@@ -192,10 +207,10 @@ * in the kernel.
*
* @note The default is @p TRUE.
- * @note Requires @p CH_USE_MUTEXES.
+ * @note Requires @p CH_CFG_USE_MUTEXES.
*/
-#if !defined(CH_USE_CONDVARS) || defined(__DOXYGEN__)
-#define CH_USE_CONDVARS TRUE
+#if !defined(CH_CFG_USE_CONDVARS) || defined(__DOXYGEN__)
+#define CH_CFG_USE_CONDVARS TRUE
#endif
/**
@@ -204,10 +219,10 @@ * specification are included in the kernel.
*
* @note The default is @p TRUE.
- * @note Requires @p CH_USE_CONDVARS.
+ * @note Requires @p CH_CFG_USE_CONDVARS.
*/
-#if !defined(CH_USE_CONDVARS_TIMEOUT) || defined(__DOXYGEN__)
-#define CH_USE_CONDVARS_TIMEOUT TRUE
+#if !defined(CH_CFG_USE_CONDVARS_TIMEOUT) || defined(__DOXYGEN__)
+#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE
#endif
/**
@@ -216,8 +231,8 @@ *
* @note The default is @p TRUE.
*/
-#if !defined(CH_USE_EVENTS) || defined(__DOXYGEN__)
-#define CH_USE_EVENTS TRUE
+#if !defined(CH_CFG_USE_EVENTS) || defined(__DOXYGEN__)
+#define CH_CFG_USE_EVENTS TRUE
#endif
/**
@@ -226,10 +241,10 @@ * are included in the kernel.
*
* @note The default is @p TRUE.
- * @note Requires @p CH_USE_EVENTS.
+ * @note Requires @p CH_CFG_USE_EVENTS.
*/
-#if !defined(CH_USE_EVENTS_TIMEOUT) || defined(__DOXYGEN__)
-#define CH_USE_EVENTS_TIMEOUT TRUE
+#if !defined(CH_CFG_USE_EVENTS_TIMEOUT) || defined(__DOXYGEN__)
+#define CH_CFG_USE_EVENTS_TIMEOUT TRUE
#endif
/**
@@ -239,8 +254,8 @@ *
* @note The default is @p TRUE.
*/
-#if !defined(CH_USE_MESSAGES) || defined(__DOXYGEN__)
-#define CH_USE_MESSAGES TRUE
+#if !defined(CH_CFG_USE_MESSAGES) || defined(__DOXYGEN__)
+#define CH_CFG_USE_MESSAGES TRUE
#endif
/**
@@ -248,11 +263,12 @@ * @details If enabled then messages are served by priority rather than in
* FIFO order.
*
- * @note The default is @p FALSE. Enable this if you have special requirements.
- * @note Requires @p CH_USE_MESSAGES.
+ * @note The default is @p FALSE. Enable this if you have special
+ * requirements.
+ * @note Requires @p CH_CFG_USE_MESSAGES.
*/
-#if !defined(CH_USE_MESSAGES_PRIORITY) || defined(__DOXYGEN__)
-#define CH_USE_MESSAGES_PRIORITY FALSE
+#if !defined(CH_CFG_USE_MESSAGES_PRIORITY) || defined(__DOXYGEN__)
+#define CH_CFG_USE_MESSAGES_PRIORITY FALSE
#endif
/**
@@ -261,10 +277,10 @@ * included in the kernel.
*
* @note The default is @p TRUE.
- * @note Requires @p CH_USE_SEMAPHORES.
+ * @note Requires @p CH_CFG_USE_SEMAPHORES.
*/
-#if !defined(CH_USE_MAILBOXES) || defined(__DOXYGEN__)
-#define CH_USE_MAILBOXES TRUE
+#if !defined(CH_CFG_USE_MAILBOXES) || defined(__DOXYGEN__)
+#define CH_CFG_USE_MAILBOXES TRUE
#endif
/**
@@ -273,8 +289,8 @@ *
* @note The default is @p TRUE.
*/
-#if !defined(CH_USE_QUEUES) || defined(__DOXYGEN__)
-#define CH_USE_QUEUES TRUE
+#if !defined(CH_CFG_USE_QUEUES) || defined(__DOXYGEN__)
+#define CH_CFG_USE_QUEUES TRUE
#endif
/**
@@ -284,8 +300,8 @@ *
* @note The default is @p TRUE.
*/
-#if !defined(CH_USE_MEMCORE) || defined(__DOXYGEN__)
-#define CH_USE_MEMCORE TRUE
+#if !defined(CH_CFG_USE_MEMCORE) || defined(__DOXYGEN__)
+#define CH_CFG_USE_MEMCORE TRUE
#endif
/**
@@ -294,26 +310,12 @@ * in the kernel.
*
* @note The default is @p TRUE.
- * @note Requires @p CH_USE_MEMCORE and either @p CH_USE_MUTEXES or
- * @p CH_USE_SEMAPHORES.
+ * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or
+ * @p CH_CFG_USE_SEMAPHORES.
* @note Mutexes are recommended.
*/
-#if !defined(CH_USE_HEAP) || defined(__DOXYGEN__)
-#define CH_USE_HEAP TRUE
-#endif
-
-/**
- * @brief C-runtime allocator.
- * @details If enabled the the heap allocator APIs just wrap the C-runtime
- * @p malloc() and @p free() functions.
- *
- * @note The default is @p FALSE.
- * @note Requires @p CH_USE_HEAP.
- * @note The C-runtime may or may not require @p CH_USE_MEMCORE, see the
- * appropriate documentation.
- */
-#if !defined(CH_USE_MALLOC_HEAP) || defined(__DOXYGEN__)
-#define CH_USE_MALLOC_HEAP FALSE
+#if !defined(CH_CFG_USE_HEAP) || defined(__DOXYGEN__)
+#define CH_CFG_USE_HEAP TRUE
#endif
/**
@@ -323,8 +325,8 @@ *
* @note The default is @p TRUE.
*/
-#if !defined(CH_USE_MEMPOOLS) || defined(__DOXYGEN__)
-#define CH_USE_MEMPOOLS TRUE
+#if !defined(CH_CFG_USE_MEMPOOLS) || defined(__DOXYGEN__)
+#define CH_CFG_USE_MEMPOOLS TRUE
#endif
/**
@@ -333,11 +335,11 @@ * in the kernel.
*
* @note The default is @p TRUE.
- * @note Requires @p CH_USE_WAITEXIT.
- * @note Requires @p CH_USE_HEAP and/or @p CH_USE_MEMPOOLS.
+ * @note Requires @p CH_CFG_USE_WAITEXIT.
+ * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS.
*/
-#if !defined(CH_USE_DYNAMIC) || defined(__DOXYGEN__)
-#define CH_USE_DYNAMIC TRUE
+#if !defined(CH_CFG_USE_DYNAMIC) || defined(__DOXYGEN__)
+#define CH_CFG_USE_DYNAMIC TRUE
#endif
/** @} */
@@ -350,6 +352,15 @@ /*===========================================================================*/
/**
+ * @brief Debug option, kernel statistics.
+ *
+ * @note The default is @p FALSE.
+ */
+#if !defined(CH_DBG_STATISTICS) || defined(__DOXYGEN__)
+#define CH_DBG_STATISTICS TRUE
+#endif
+
+/**
* @brief Debug option, system state check.
* @details If enabled the correct call protocol for system APIs is checked
* at runtime.
@@ -357,7 +368,7 @@ * @note The default is @p FALSE.
*/
#if !defined(CH_DBG_SYSTEM_STATE_CHECK) || defined(__DOXYGEN__)
-#define CH_DBG_SYSTEM_STATE_CHECK TRUE
+#define CH_DBG_SYSTEM_STATE_CHECK TRUE
#endif
/**
@@ -368,7 +379,7 @@ * @note The default is @p FALSE.
*/
#if !defined(CH_DBG_ENABLE_CHECKS) || defined(__DOXYGEN__)
-#define CH_DBG_ENABLE_CHECKS TRUE
+#define CH_DBG_ENABLE_CHECKS TRUE
#endif
/**
@@ -380,7 +391,7 @@ * @note The default is @p FALSE.
*/
#if !defined(CH_DBG_ENABLE_ASSERTS) || defined(__DOXYGEN__)
-#define CH_DBG_ENABLE_ASSERTS TRUE
+#define CH_DBG_ENABLE_ASSERTS TRUE
#endif
/**
@@ -391,7 +402,7 @@ * @note The default is @p FALSE.
*/
#if !defined(CH_DBG_ENABLE_TRACE) || defined(__DOXYGEN__)
-#define CH_DBG_ENABLE_TRACE TRUE
+#define CH_DBG_ENABLE_TRACE TRUE
#endif
/**
@@ -405,7 +416,7 @@ * @p panic_msg variable set to @p NULL.
*/
#if !defined(CH_DBG_ENABLE_STACK_CHECK) || defined(__DOXYGEN__)
-#define CH_DBG_ENABLE_STACK_CHECK TRUE
+#define CH_DBG_ENABLE_STACK_CHECK TRUE
#endif
/**
@@ -417,20 +428,20 @@ * @note The default is @p FALSE.
*/
#if !defined(CH_DBG_FILL_THREADS) || defined(__DOXYGEN__)
-#define CH_DBG_FILL_THREADS TRUE
+#define CH_DBG_FILL_THREADS TRUE
#endif
/**
* @brief Debug option, threads profiling.
- * @details If enabled then a field is added to the @p Thread structure that
+ * @details If enabled then a field is added to the @p thread_t structure that
* counts the system ticks occurred while executing the thread.
*
- * @note The default is @p TRUE.
- * @note This debug option is defaulted to TRUE because it is required by
- * some test cases into the test suite.
+ * @note The default is @p FALSE.
+ * @note This debug option is not currently compatible with the
+ * tickless mode.
*/
#if !defined(CH_DBG_THREADS_PROFILING) || defined(__DOXYGEN__)
-#define CH_DBG_THREADS_PROFILING TRUE
+#define CH_DBG_THREADS_PROFILING FALSE
#endif
/** @} */
@@ -444,10 +455,10 @@ /**
* @brief Threads descriptor structure extension.
- * @details User fields added to the end of the @p Thread structure.
+ * @details User fields added to the end of the @p thread_t structure.
*/
-#if !defined(THREAD_EXT_FIELDS) || defined(__DOXYGEN__)
-#define THREAD_EXT_FIELDS \
+#if !defined(CH_CFG_THREAD_EXTRA_FIELDS) || defined(__DOXYGEN__)
+#define CH_CFG_THREAD_EXTRA_FIELDS \
/* Add threads custom fields here.*/
#endif
@@ -458,8 +469,8 @@ * @note It is invoked from within @p chThdInit() and implicitly from all
* the threads creation APIs.
*/
-#if !defined(THREAD_EXT_INIT_HOOK) || defined(__DOXYGEN__)
-#define THREAD_EXT_INIT_HOOK(tp) { \
+#if !defined(CH_CFG_THREAD_INIT_HOOK) || defined(__DOXYGEN__)
+#define CH_CFG_THREAD_INIT_HOOK(tp) { \
/* Add threads initialization code here.*/ \
}
#endif
@@ -472,8 +483,8 @@ * @note It is also invoked when the threads simply return in order to
* terminate.
*/
-#if !defined(THREAD_EXT_EXIT_HOOK) || defined(__DOXYGEN__)
-#define THREAD_EXT_EXIT_HOOK(tp) { \
+#if !defined(CH_CFG_THREAD_EXIT_HOOK) || defined(__DOXYGEN__)
+#define CH_CFG_THREAD_EXIT_HOOK(tp) { \
/* Add threads finalization code here.*/ \
}
#endif
@@ -482,18 +493,40 @@ * @brief Context switch hook.
* @details This hook is invoked just before switching between threads.
*/
-#if !defined(THREAD_CONTEXT_SWITCH_HOOK) || defined(__DOXYGEN__)
-#define THREAD_CONTEXT_SWITCH_HOOK(ntp, otp) { \
+#if !defined(CH_CFG_CONTEXT_SWITCH_HOOK) || defined(__DOXYGEN__)
+#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \
/* System halt code here.*/ \
}
#endif
/**
+ * @brief Idle thread enter hook.
+ * @note This hook is invoked within a critical zone, no OS functions
+ * should be invoked from here.
+ * @note This macro can be used to activate a power saving mode.
+ */
+#if !defined(CH_CFG_IDLE_ENTER_HOOK) || defined(__DOXYGEN__)
+#define CH_CFG_IDLE_ENTER_HOOK() { \
+}
+#endif
+
+/**
+ * @brief Idle thread leave hook.
+ * @note This hook is invoked within a critical zone, no OS functions
+ * should be invoked from here.
+ * @note This macro can be used to deactivate a power saving mode.
+ */
+#if !defined(CH_CFG_IDLE_LEAVE_HOOK) || defined(__DOXYGEN__)
+#define CH_CFG_IDLE_LEAVE_HOOK() { \
+}
+#endif
+
+/**
* @brief Idle Loop hook.
* @details This hook is continuously invoked by the idle thread loop.
*/
-#if !defined(IDLE_LOOP_HOOK) || defined(__DOXYGEN__)
-#define IDLE_LOOP_HOOK() { \
+#if !defined(CH_CFG_IDLE_LOOP_HOOK) || defined(__DOXYGEN__)
+#define CH_CFG_IDLE_LOOP_HOOK() { \
/* Idle loop code here.*/ \
}
#endif
@@ -503,8 +536,8 @@ * @details This hook is invoked in the system tick handler immediately
* after processing the virtual timers queue.
*/
-#if !defined(SYSTEM_TICK_EVENT_HOOK) || defined(__DOXYGEN__)
-#define SYSTEM_TICK_EVENT_HOOK() { \
+#if !defined(CH_CFG_SYSTEM_TICK_HOOK) || defined(__DOXYGEN__)
+#define CH_CFG_SYSTEM_TICK_HOOK() { \
/* System tick event code here.*/ \
}
#endif
@@ -514,8 +547,8 @@ * @details This hook is invoked in case to a system halting error before
* the system is halted.
*/
-#if !defined(SYSTEM_HALT_HOOK) || defined(__DOXYGEN__)
-#define SYSTEM_HALT_HOOK() { \
+#if !defined(CH_CFG_SYSTEM_HALT_HOOK) || defined(__DOXYGEN__)
+#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \
/* System halt code here.*/ \
}
#endif
diff --git a/testhal/STM32F4xx/UART/halconf.h b/testhal/STM32F4xx/UART/halconf.h index 520e71b0a..dd527aeda 100644 --- a/testhal/STM32F4xx/UART/halconf.h +++ b/testhal/STM32F4xx/UART/halconf.h @@ -31,13 +31,6 @@ #include "mcuconf.h"
/**
- * @brief Enables the TM subsystem.
- */
-#if !defined(HAL_USE_TM) || defined(__DOXYGEN__)
-#define HAL_USE_TM TRUE
-#endif
-
-/**
* @brief Enables the PAL subsystem.
*/
#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__)
diff --git a/testhal/STM32F4xx/UART/main.c b/testhal/STM32F4xx/UART/main.c index fcd6fa965..2e41480ad 100644 --- a/testhal/STM32F4xx/UART/main.c +++ b/testhal/STM32F4xx/UART/main.c @@ -17,7 +17,7 @@ #include "ch.h"
#include "hal.h"
-static VirtualTimer vt3, vt4, vt5;
+static virtual_timer_t vt3, vt4, vt5;
static const uint8_t message[] = "0123456789ABCDEF";
static uint8_t buffer[16];
@@ -56,11 +56,11 @@ static void txend2(UARTDriver *uartp) { (void)uartp;
palSetPad(GPIOD, GPIOD_LED5);
- chSysLockFromIsr();
+ chSysLockFromISR();
if (chVTIsArmedI(&vt5))
chVTResetI(&vt5);
chVTSetI(&vt5, MS2ST(200), led5off, NULL);
- chSysUnlockFromIsr();
+ chSysUnlockFromISR();
}
/*
@@ -83,11 +83,11 @@ static void rxchar(UARTDriver *uartp, uint16_t c) { (void)c;
/* Flashing the LED each time a character is received.*/
palSetPad(GPIOD, GPIOD_LED4);
- chSysLockFromIsr();
+ chSysLockFromISR();
if (chVTIsArmedI(&vt4))
chVTResetI(&vt4);
chVTSetI(&vt4, MS2ST(200), led4off, NULL);
- chSysUnlockFromIsr();
+ chSysUnlockFromISR();
}
/*
@@ -99,11 +99,11 @@ static void rxend(UARTDriver *uartp) { /* Flashing the LED each time a character is received.*/
palSetPad(GPIOD, GPIOD_LED3);
- chSysLockFromIsr();
+ chSysLockFromISR();
if (chVTIsArmedI(&vt3))
chVTResetI(&vt3);
chVTSetI(&vt3, MS2ST(200), led3off, NULL);
- chSysUnlockFromIsr();
+ chSysUnlockFromISR();
}
/*
diff --git a/testhal/STM32F4xx/UART/mcuconf.h b/testhal/STM32F4xx/UART/mcuconf.h index 5c3c5582f..960ea4e2d 100644 --- a/testhal/STM32F4xx/UART/mcuconf.h +++ b/testhal/STM32F4xx/UART/mcuconf.h @@ -245,6 +245,8 @@ #define STM32_UART_USE_USART1 TRUE
#define STM32_UART_USE_USART2 TRUE
#define STM32_UART_USE_USART3 TRUE
+#define STM32_UART_USE_UART4 TRUE
+#define STM32_UART_USE_UART5 TRUE
#define STM32_UART_USE_USART6 TRUE
#define STM32_UART_USART1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 5)
#define STM32_UART_USART1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7)
@@ -252,15 +254,23 @@ #define STM32_UART_USART2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6)
#define STM32_UART_USART3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 1)
#define STM32_UART_USART3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3)
+#define STM32_UART_UART4_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2)
+#define STM32_UART_UART4_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4)
+#define STM32_UART_UART5_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0)
+#define STM32_UART_UART5_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7)
#define STM32_UART_USART6_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 2)
#define STM32_UART_USART6_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7)
#define STM32_UART_USART1_IRQ_PRIORITY 12
#define STM32_UART_USART2_IRQ_PRIORITY 12
#define STM32_UART_USART3_IRQ_PRIORITY 12
+#define STM32_UART_UART4_IRQ_PRIORITY 12
+#define STM32_UART_UART5_IRQ_PRIORITY 12
#define STM32_UART_USART6_IRQ_PRIORITY 12
#define STM32_UART_USART1_DMA_PRIORITY 0
#define STM32_UART_USART2_DMA_PRIORITY 0
#define STM32_UART_USART3_DMA_PRIORITY 0
+#define STM32_UART_UART4_DMA_PRIORITY 0
+#define STM32_UART_UART5_DMA_PRIORITY 0
#define STM32_UART_USART6_DMA_PRIORITY 0
#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure")
diff --git a/testhal/STM32F4xx/USB_CDC/mcuconf.h b/testhal/STM32F4xx/USB_CDC/mcuconf.h index b60086fd4..35fdaf411 100644 --- a/testhal/STM32F4xx/USB_CDC/mcuconf.h +++ b/testhal/STM32F4xx/USB_CDC/mcuconf.h @@ -245,6 +245,8 @@ #define STM32_UART_USE_USART1 FALSE
#define STM32_UART_USE_USART2 FALSE
#define STM32_UART_USE_USART3 FALSE
+#define STM32_UART_USE_UART4 FALSE
+#define STM32_UART_USE_UART5 FALSE
#define STM32_UART_USE_USART6 FALSE
#define STM32_UART_USART1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 5)
#define STM32_UART_USART1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7)
@@ -252,15 +254,23 @@ #define STM32_UART_USART2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6)
#define STM32_UART_USART3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 1)
#define STM32_UART_USART3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3)
+#define STM32_UART_UART4_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2)
+#define STM32_UART_UART4_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4)
+#define STM32_UART_UART5_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0)
+#define STM32_UART_UART5_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7)
#define STM32_UART_USART6_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 2)
#define STM32_UART_USART6_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7)
#define STM32_UART_USART1_IRQ_PRIORITY 12
#define STM32_UART_USART2_IRQ_PRIORITY 12
#define STM32_UART_USART3_IRQ_PRIORITY 12
+#define STM32_UART_UART4_IRQ_PRIORITY 12
+#define STM32_UART_UART5_IRQ_PRIORITY 12
#define STM32_UART_USART6_IRQ_PRIORITY 12
#define STM32_UART_USART1_DMA_PRIORITY 0
#define STM32_UART_USART2_DMA_PRIORITY 0
#define STM32_UART_USART3_DMA_PRIORITY 0
+#define STM32_UART_UART4_DMA_PRIORITY 0
+#define STM32_UART_UART5_DMA_PRIORITY 0
#define STM32_UART_USART6_DMA_PRIORITY 0
#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure")
|