diff options
108 files changed, 22134 insertions, 8322 deletions
diff --git a/os/hal/include/pal.h b/os/hal/include/pal.h index fc0045bf4..2e5b78c03 100644 --- a/os/hal/include/pal.h +++ b/os/hal/include/pal.h @@ -127,7 +127,7 @@ typedef struct { /**
* @brief Offset, within the port, of the least significant bit of the bus.
*/
- uint_fast8_t offset;
+ iomode_t offset;
} IOBus;
/*===========================================================================*/
diff --git a/os/hal/platforms/AT91SAM7/pal_lld.c b/os/hal/platforms/AT91SAM7/pal_lld.c index 5422756ac..b392d627c 100644 --- a/os/hal/platforms/AT91SAM7/pal_lld.c +++ b/os/hal/platforms/AT91SAM7/pal_lld.c @@ -121,7 +121,7 @@ void _pal_lld_init(const PALConfig *config) { */
void _pal_lld_setgroupmode(ioportid_t port,
ioportmask_t mask,
- uint_fast8_t mode) {
+ iomode_t mode) {
switch (mode) {
case PAL_MODE_RESET:
diff --git a/os/hal/platforms/AT91SAM7/pal_lld.h b/os/hal/platforms/AT91SAM7/pal_lld.h index 7aeb3b933..53fdd417e 100644 --- a/os/hal/platforms/AT91SAM7/pal_lld.h +++ b/os/hal/platforms/AT91SAM7/pal_lld.h @@ -241,7 +241,7 @@ extern "C" { void _pal_lld_init(const PALConfig *config);
void _pal_lld_setgroupmode(ioportid_t port,
ioportmask_t mask,
- uint_fast8_t mode);
+ iomode_t mode);
#ifdef __cplusplus
}
#endif
diff --git a/os/hal/platforms/LPC11xx/core_cm0.h b/os/hal/platforms/LPC11xx/core_cm0.h deleted file mode 100644 index 7c24e63eb..000000000 --- a/os/hal/platforms/LPC11xx/core_cm0.h +++ /dev/null @@ -1,985 +0,0 @@ -/*
- ChibiOS/RT - Copyright (C) 2006,2007,2008,2009,2010,
- 2011 Giovanni Di Sirio.
-
- This file is part of ChibiOS/RT.
-
- ChibiOS/RT is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 3 of the License, or
- (at your option) any later version.
-
- ChibiOS/RT is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-
-/*
- * Parts of this files have been modified in ChibiOS/RT in order to fix
- * some code quality issues and conflicting declarations.
- */
-
-/**************************************************************************//**
- * @file core_cm0.h
- * @brief CMSIS Cortex-M0 Core Peripheral Access Layer Header File
- * @version V1.30
- * @date 30. October 2009
- *
- * @note
- * Copyright (C) 2009 ARM Limited. All rights reserved.
- *
- * @par
- * ARM Limited (ARM) is supplying this software for use with Cortex-M
- * processor based microcontrollers. This file can be freely distributed
- * within development tools that are supporting such ARM based processors.
- *
- * @par
- * THIS SOFTWARE IS PROVIDED "AS IS". NO WARRANTIES, WHETHER EXPRESS, IMPLIED
- * OR STATUTORY, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE.
- * ARM SHALL NOT, IN ANY CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR
- * CONSEQUENTIAL DAMAGES, FOR ANY REASON WHATSOEVER.
- *
- ******************************************************************************/
-
-#ifndef __CM0_CORE_H__
-#define __CM0_CORE_H__
-
-/** @addtogroup CMSIS_CM0_core_LintCinfiguration CMSIS CM0 Core Lint Configuration
- *
- * List of Lint messages which will be suppressed and not shown:
- * - not yet checked
- * .
- * Note: To re-enable a Message, insert a space before 'lint' *
- *
- */
-
-
-/** @addtogroup CMSIS_CM0_core_definitions CM0 Core Definitions
- This file defines all structures and symbols for CMSIS core:
- - CMSIS version number
- - Cortex-M core registers and bitfields
- - Cortex-M core peripheral base address
- @{
- */
-
-#ifdef __cplusplus
- extern "C" {
-#endif
-
-#define __CM0_CMSIS_VERSION_MAIN (0x01) /*!< [31:16] CMSIS HAL main version */
-#define __CM0_CMSIS_VERSION_SUB (0x30) /*!< [15:0] CMSIS HAL sub version */
-#define __CM0_CMSIS_VERSION ((__CM0_CMSIS_VERSION_MAIN << 16) | __CM0_CMSIS_VERSION_SUB) /*!< CMSIS HAL version number */
-
-#define __CORTEX_M (0x00) /*!< Cortex core */
-
-#include <stdint.h> /* Include standard types */
-
-#if defined (__ICCARM__)
- #include <intrinsics.h> /* IAR Intrinsics */
-#endif
-
-
-#ifndef __NVIC_PRIO_BITS
- #define __NVIC_PRIO_BITS 2 /*!< standard definition for NVIC Priority Bits */
-#endif
-
-
-
-
-/**
- * IO definitions
- *
- * define access restrictions to peripheral registers
- */
-
-#ifdef __cplusplus
- #define __I volatile /*!< defines 'read only' permissions */
-#else
- #define __I volatile const /*!< defines 'read only' permissions */
-#endif
-#define __O volatile /*!< defines 'write only' permissions */
-#define __IO volatile /*!< defines 'read / write' permissions */
-
-
-
-/*******************************************************************************
- * Register Abstraction
- ******************************************************************************/
-/** @addtogroup CMSIS_CM0_core_register CMSIS CM0 Core Register
- @{
-*/
-
-
-/** @addtogroup CMSIS_CM0_NVIC CMSIS CM0 NVIC
- memory mapped structure for Nested Vectored Interrupt Controller (NVIC)
- @{
- */
-typedef struct
-{
- __IO uint32_t ISER[1]; /*!< (Offset: 0x000) Interrupt Set Enable Register */
- uint32_t RESERVED0[31];
- __IO uint32_t ICER[1]; /*!< (Offset: 0x080) Interrupt Clear Enable Register */
- uint32_t RSERVED1[31];
- __IO uint32_t ISPR[1]; /*!< (Offset: 0x100) Interrupt Set Pending Register */
- uint32_t RESERVED2[31];
- __IO uint32_t ICPR[1]; /*!< (Offset: 0x180) Interrupt Clear Pending Register */
- uint32_t RESERVED3[31];
- uint32_t RESERVED4[64];
- __IO uint32_t IPR[8]; /*!< (Offset: 0x3EC) Interrupt Priority Register */
-} NVIC_Type;
-/*@}*/ /* end of group CMSIS_CM0_NVIC */
-
-
-/** @addtogroup CMSIS_CM0_SCB CMSIS CM0 SCB
- memory mapped structure for System Control Block (SCB)
- @{
- */
-typedef struct
-{
- __I uint32_t CPUID; /*!< Offset: 0x00 CPU ID Base Register */
- __IO uint32_t ICSR; /*!< Offset: 0x04 Interrupt Control State Register */
- uint32_t RESERVED0;
- __IO uint32_t AIRCR; /*!< Offset: 0x0C Application Interrupt / Reset Control Register */
- __IO uint32_t SCR; /*!< Offset: 0x10 System Control Register */
- __IO uint32_t CCR; /*!< Offset: 0x14 Configuration Control Register */
- uint32_t RESERVED1;
- __IO uint32_t SHP[2]; /*!< Offset: 0x1C System Handlers Priority Registers. [0] is RESERVED */
- __IO uint32_t SHCSR; /*!< Offset: 0x24 System Handler Control and State Register */
- uint32_t RESERVED2[2];
- __IO uint32_t DFSR; /*!< Offset: 0x30 Debug Fault Status Register */
-} SCB_Type;
-
-/* SCB CPUID Register Definitions */
-#define SCB_CPUID_IMPLEMENTER_Pos 24 /*!< SCB CPUID: IMPLEMENTER Position */
-#define SCB_CPUID_IMPLEMENTER_Msk (0xFFul << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */
-
-#define SCB_CPUID_VARIANT_Pos 20 /*!< SCB CPUID: VARIANT Position */
-#define SCB_CPUID_VARIANT_Msk (0xFul << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */
-
-#define SCB_CPUID_ARCHITECTURE_Pos 16 /*!< SCB CPUID: ARCHITECTURE Position */
-#define SCB_CPUID_ARCHITECTURE_Msk (0xFul << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */
-
-#define SCB_CPUID_PARTNO_Pos 4 /*!< SCB CPUID: PARTNO Position */
-#define SCB_CPUID_PARTNO_Msk (0xFFFul << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */
-
-#define SCB_CPUID_REVISION_Pos 0 /*!< SCB CPUID: REVISION Position */
-#define SCB_CPUID_REVISION_Msk (0xFul << SCB_CPUID_REVISION_Pos) /*!< SCB CPUID: REVISION Mask */
-
-/* SCB Interrupt Control State Register Definitions */
-#define SCB_ICSR_NMIPENDSET_Pos 31 /*!< SCB ICSR: NMIPENDSET Position */
-#define SCB_ICSR_NMIPENDSET_Msk (1ul << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */
-
-#define SCB_ICSR_PENDSVSET_Pos 28 /*!< SCB ICSR: PENDSVSET Position */
-#define SCB_ICSR_PENDSVSET_Msk (1ul << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */
-
-#define SCB_ICSR_PENDSVCLR_Pos 27 /*!< SCB ICSR: PENDSVCLR Position */
-#define SCB_ICSR_PENDSVCLR_Msk (1ul << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */
-
-#define SCB_ICSR_PENDSTSET_Pos 26 /*!< SCB ICSR: PENDSTSET Position */
-#define SCB_ICSR_PENDSTSET_Msk (1ul << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */
-
-#define SCB_ICSR_PENDSTCLR_Pos 25 /*!< SCB ICSR: PENDSTCLR Position */
-#define SCB_ICSR_PENDSTCLR_Msk (1ul << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */
-
-#define SCB_ICSR_ISRPREEMPT_Pos 23 /*!< SCB ICSR: ISRPREEMPT Position */
-#define SCB_ICSR_ISRPREEMPT_Msk (1ul << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */
-
-#define SCB_ICSR_ISRPENDING_Pos 22 /*!< SCB ICSR: ISRPENDING Position */
-#define SCB_ICSR_ISRPENDING_Msk (1ul << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */
-
-#define SCB_ICSR_VECTPENDING_Pos 12 /*!< SCB ICSR: VECTPENDING Position */
-#define SCB_ICSR_VECTPENDING_Msk (0x1FFul << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */
-
-#define SCB_ICSR_VECTACTIVE_Pos 0 /*!< SCB ICSR: VECTACTIVE Position */
-#define SCB_ICSR_VECTACTIVE_Msk (0x1FFul << SCB_ICSR_VECTACTIVE_Pos) /*!< SCB ICSR: VECTACTIVE Mask */
-
-/* SCB Application Interrupt and Reset Control Register Definitions */
-#define SCB_AIRCR_VECTKEY_Pos 16 /*!< SCB AIRCR: VECTKEY Position */
-#define SCB_AIRCR_VECTKEY_Msk (0xFFFFul << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */
-
-#define SCB_AIRCR_VECTKEYSTAT_Pos 16 /*!< SCB AIRCR: VECTKEYSTAT Position */
-#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFul << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */
-
-#define SCB_AIRCR_ENDIANESS_Pos 15 /*!< SCB AIRCR: ENDIANESS Position */
-#define SCB_AIRCR_ENDIANESS_Msk (1ul << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */
-
-#define SCB_AIRCR_SYSRESETREQ_Pos 2 /*!< SCB AIRCR: SYSRESETREQ Position */
-#define SCB_AIRCR_SYSRESETREQ_Msk (1ul << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */
-
-#define SCB_AIRCR_VECTCLRACTIVE_Pos 1 /*!< SCB AIRCR: VECTCLRACTIVE Position */
-#define SCB_AIRCR_VECTCLRACTIVE_Msk (1ul << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */
-
-/* SCB System Control Register Definitions */
-#define SCB_SCR_SEVONPEND_Pos 4 /*!< SCB SCR: SEVONPEND Position */
-#define SCB_SCR_SEVONPEND_Msk (1ul << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */
-
-#define SCB_SCR_SLEEPDEEP_Pos 2 /*!< SCB SCR: SLEEPDEEP Position */
-#define SCB_SCR_SLEEPDEEP_Msk (1ul << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */
-
-#define SCB_SCR_SLEEPONEXIT_Pos 1 /*!< SCB SCR: SLEEPONEXIT Position */
-#define SCB_SCR_SLEEPONEXIT_Msk (1ul << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */
-
-/* SCB Configuration Control Register Definitions */
-#define SCB_CCR_STKALIGN_Pos 9 /*!< SCB CCR: STKALIGN Position */
-#define SCB_CCR_STKALIGN_Msk (1ul << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */
-
-#define SCB_CCR_UNALIGN_TRP_Pos 3 /*!< SCB CCR: UNALIGN_TRP Position */
-#define SCB_CCR_UNALIGN_TRP_Msk (1ul << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */
-
-/* SCB System Handler Control and State Register Definitions */
-#define SCB_SHCSR_SVCALLPENDED_Pos 15 /*!< SCB SHCSR: SVCALLPENDED Position */
-#define SCB_SHCSR_SVCALLPENDED_Msk (1ul << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */
-
-/* SCB Debug Fault Status Register Definitions */
-#define SCB_DFSR_EXTERNAL_Pos 4 /*!< SCB DFSR: EXTERNAL Position */
-#define SCB_DFSR_EXTERNAL_Msk (1ul << SCB_DFSR_EXTERNAL_Pos) /*!< SCB DFSR: EXTERNAL Mask */
-
-#define SCB_DFSR_VCATCH_Pos 3 /*!< SCB DFSR: VCATCH Position */
-#define SCB_DFSR_VCATCH_Msk (1ul << SCB_DFSR_VCATCH_Pos) /*!< SCB DFSR: VCATCH Mask */
-
-#define SCB_DFSR_DWTTRAP_Pos 2 /*!< SCB DFSR: DWTTRAP Position */
-#define SCB_DFSR_DWTTRAP_Msk (1ul << SCB_DFSR_DWTTRAP_Pos) /*!< SCB DFSR: DWTTRAP Mask */
-
-#define SCB_DFSR_BKPT_Pos 1 /*!< SCB DFSR: BKPT Position */
-#define SCB_DFSR_BKPT_Msk (1ul << SCB_DFSR_BKPT_Pos) /*!< SCB DFSR: BKPT Mask */
-
-#define SCB_DFSR_HALTED_Pos 0 /*!< SCB DFSR: HALTED Position */
-#define SCB_DFSR_HALTED_Msk (1ul << SCB_DFSR_HALTED_Pos) /*!< SCB DFSR: HALTED Mask */
-/*@}*/ /* end of group CMSIS_CM0_SCB */
-
-
-/** @addtogroup CMSIS_CM0_SysTick CMSIS CM0 SysTick
- memory mapped structure for SysTick
- @{
- */
-typedef struct
-{
- __IO uint32_t CTRL; /*!< Offset: 0x00 SysTick Control and Status Register */
- __IO uint32_t LOAD; /*!< Offset: 0x04 SysTick Reload Value Register */
- __IO uint32_t VAL; /*!< Offset: 0x08 SysTick Current Value Register */
- __I uint32_t CALIB; /*!< Offset: 0x0C SysTick Calibration Register */
-} SysTick_Type;
-
-/* SysTick Control / Status Register Definitions */
-#define SysTick_CTRL_COUNTFLAG_Pos 16 /*!< SysTick CTRL: COUNTFLAG Position */
-#define SysTick_CTRL_COUNTFLAG_Msk (1ul << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */
-
-#define SysTick_CTRL_CLKSOURCE_Pos 2 /*!< SysTick CTRL: CLKSOURCE Position */
-#define SysTick_CTRL_CLKSOURCE_Msk (1ul << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */
-
-#define SysTick_CTRL_TICKINT_Pos 1 /*!< SysTick CTRL: TICKINT Position */
-#define SysTick_CTRL_TICKINT_Msk (1ul << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */
-
-#define SysTick_CTRL_ENABLE_Pos 0 /*!< SysTick CTRL: ENABLE Position */
-#define SysTick_CTRL_ENABLE_Msk (1ul << SysTick_CTRL_ENABLE_Pos) /*!< SysTick CTRL: ENABLE Mask */
-
-/* SysTick Reload Register Definitions */
-#define SysTick_LOAD_RELOAD_Pos 0 /*!< SysTick LOAD: RELOAD Position */
-#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFul << SysTick_LOAD_RELOAD_Pos) /*!< SysTick LOAD: RELOAD Mask */
-
-/* SysTick Current Register Definitions */
-#define SysTick_VAL_CURRENT_Pos 0 /*!< SysTick VAL: CURRENT Position */
-#define SysTick_VAL_CURRENT_Msk (0xFFFFFFul << SysTick_VAL_CURRENT_Pos) /*!< SysTick VAL: CURRENT Mask */
-
-/* SysTick Calibration Register Definitions */
-#define SysTick_CALIB_NOREF_Pos 31 /*!< SysTick CALIB: NOREF Position */
-#define SysTick_CALIB_NOREF_Msk (1ul << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */
-
-#define SysTick_CALIB_SKEW_Pos 30 /*!< SysTick CALIB: SKEW Position */
-#define SysTick_CALIB_SKEW_Msk (1ul << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */
-
-#define SysTick_CALIB_TENMS_Pos 0 /*!< SysTick CALIB: TENMS Position */
-#define SysTick_CALIB_TENMS_Msk (0xFFFFFFul << SysTick_VAL_CURRENT_Pos) /*!< SysTick CALIB: TENMS Mask */
-/*@}*/ /* end of group CMSIS_CM0_SysTick */
-
-
-/** @addtogroup CMSIS_CM0_CoreDebug CMSIS CM0 Core Debug
- memory mapped structure for Core Debug Register
- @{
- */
-typedef struct
-{
- __IO uint32_t DHCSR; /*!< Offset: 0x00 Debug Halting Control and Status Register */
- __O uint32_t DCRSR; /*!< Offset: 0x04 Debug Core Register Selector Register */
- __IO uint32_t DCRDR; /*!< Offset: 0x08 Debug Core Register Data Register */
- __IO uint32_t DEMCR; /*!< Offset: 0x0C Debug Exception and Monitor Control Register */
-} CoreDebug_Type;
-
-/* Debug Halting Control and Status Register */
-#define CoreDebug_DHCSR_DBGKEY_Pos 16 /*!< CoreDebug DHCSR: DBGKEY Position */
-#define CoreDebug_DHCSR_DBGKEY_Msk (0xFFFFul << CoreDebug_DHCSR_DBGKEY_Pos) /*!< CoreDebug DHCSR: DBGKEY Mask */
-
-#define CoreDebug_DHCSR_S_RESET_ST_Pos 25 /*!< CoreDebug DHCSR: S_RESET_ST Position */
-#define CoreDebug_DHCSR_S_RESET_ST_Msk (1ul << CoreDebug_DHCSR_S_RESET_ST_Pos) /*!< CoreDebug DHCSR: S_RESET_ST Mask */
-
-#define CoreDebug_DHCSR_S_RETIRE_ST_Pos 24 /*!< CoreDebug DHCSR: S_RETIRE_ST Position */
-#define CoreDebug_DHCSR_S_RETIRE_ST_Msk (1ul << CoreDebug_DHCSR_S_RETIRE_ST_Pos) /*!< CoreDebug DHCSR: S_RETIRE_ST Mask */
-
-#define CoreDebug_DHCSR_S_LOCKUP_Pos 19 /*!< CoreDebug DHCSR: S_LOCKUP Position */
-#define CoreDebug_DHCSR_S_LOCKUP_Msk (1ul << CoreDebug_DHCSR_S_LOCKUP_Pos) /*!< CoreDebug DHCSR: S_LOCKUP Mask */
-
-#define CoreDebug_DHCSR_S_SLEEP_Pos 18 /*!< CoreDebug DHCSR: S_SLEEP Position */
-#define CoreDebug_DHCSR_S_SLEEP_Msk (1ul << CoreDebug_DHCSR_S_SLEEP_Pos) /*!< CoreDebug DHCSR: S_SLEEP Mask */
-
-#define CoreDebug_DHCSR_S_HALT_Pos 17 /*!< CoreDebug DHCSR: S_HALT Position */
-#define CoreDebug_DHCSR_S_HALT_Msk (1ul << CoreDebug_DHCSR_S_HALT_Pos) /*!< CoreDebug DHCSR: S_HALT Mask */
-
-#define CoreDebug_DHCSR_S_REGRDY_Pos 16 /*!< CoreDebug DHCSR: S_REGRDY Position */
-#define CoreDebug_DHCSR_S_REGRDY_Msk (1ul << CoreDebug_DHCSR_S_REGRDY_Pos) /*!< CoreDebug DHCSR: S_REGRDY Mask */
-
-#define CoreDebug_DHCSR_C_MASKINTS_Pos 3 /*!< CoreDebug DHCSR: C_MASKINTS Position */
-#define CoreDebug_DHCSR_C_MASKINTS_Msk (1ul << CoreDebug_DHCSR_C_MASKINTS_Pos) /*!< CoreDebug DHCSR: C_MASKINTS Mask */
-
-#define CoreDebug_DHCSR_C_STEP_Pos 2 /*!< CoreDebug DHCSR: C_STEP Position */
-#define CoreDebug_DHCSR_C_STEP_Msk (1ul << CoreDebug_DHCSR_C_STEP_Pos) /*!< CoreDebug DHCSR: C_STEP Mask */
-
-#define CoreDebug_DHCSR_C_HALT_Pos 1 /*!< CoreDebug DHCSR: C_HALT Position */
-#define CoreDebug_DHCSR_C_HALT_Msk (1ul << CoreDebug_DHCSR_C_HALT_Pos) /*!< CoreDebug DHCSR: C_HALT Mask */
-
-#define CoreDebug_DHCSR_C_DEBUGEN_Pos 0 /*!< CoreDebug DHCSR: C_DEBUGEN Position */
-#define CoreDebug_DHCSR_C_DEBUGEN_Msk (1ul << CoreDebug_DHCSR_C_DEBUGEN_Pos) /*!< CoreDebug DHCSR: C_DEBUGEN Mask */
-
-/* Debug Core Register Selector Register */
-#define CoreDebug_DCRSR_REGWnR_Pos 16 /*!< CoreDebug DCRSR: REGWnR Position */
-#define CoreDebug_DCRSR_REGWnR_Msk (1ul << CoreDebug_DCRSR_REGWnR_Pos) /*!< CoreDebug DCRSR: REGWnR Mask */
-
-#define CoreDebug_DCRSR_REGSEL_Pos 0 /*!< CoreDebug DCRSR: REGSEL Position */
-#define CoreDebug_DCRSR_REGSEL_Msk (0x1Ful << CoreDebug_DCRSR_REGSEL_Pos) /*!< CoreDebug DCRSR: REGSEL Mask */
-
-/* Debug Exception and Monitor Control Register */
-#define CoreDebug_DEMCR_DWTENA_Pos 24 /*!< CoreDebug DEMCR: DWTENA Position */
-#define CoreDebug_DEMCR_DWTENA_Msk (1ul << CoreDebug_DEMCR_DWTENA_Pos) /*!< CoreDebug DEMCR: DWTENA Mask */
-
-#define CoreDebug_DEMCR_VC_HARDERR_Pos 10 /*!< CoreDebug DEMCR: VC_HARDERR Position */
-#define CoreDebug_DEMCR_VC_HARDERR_Msk (1ul << CoreDebug_DEMCR_VC_HARDERR_Pos) /*!< CoreDebug DEMCR: VC_HARDERR Mask */
-
-#define CoreDebug_DEMCR_VC_CORERESET_Pos 0 /*!< CoreDebug DEMCR: VC_CORERESET Position */
-#define CoreDebug_DEMCR_VC_CORERESET_Msk (1ul << CoreDebug_DEMCR_VC_CORERESET_Pos) /*!< CoreDebug DEMCR: VC_CORERESET Mask */
-/*@}*/ /* end of group CMSIS_CM0_CoreDebug */
-
-
-/* Memory mapping of Cortex-M0 Hardware */
-#define SCS_BASE (0xE000E000) /*!< System Control Space Base Address */
-#define CoreDebug_BASE (0xE000EDF0) /*!< Core Debug Base Address */
-#define SysTick_BASE (SCS_BASE + 0x0010) /*!< SysTick Base Address */
-#define NVIC_BASE (SCS_BASE + 0x0100) /*!< NVIC Base Address */
-#define SCB_BASE (SCS_BASE + 0x0D00) /*!< System Control Block Base Address */
-
-#define SCB ((SCB_Type *) SCB_BASE) /*!< SCB configuration struct */
-#define SysTick ((SysTick_Type *) SysTick_BASE) /*!< SysTick configuration struct */
-#define NVIC ((NVIC_Type *) NVIC_BASE) /*!< NVIC configuration struct */
-#define CoreDebug ((CoreDebug_Type *) CoreDebug_BASE) /*!< Core Debug configuration struct */
-
-/*@}*/ /* end of group CMSIS_CM0_core_register */
-
-
-/*******************************************************************************
- * Hardware Abstraction Layer
- ******************************************************************************/
-
-#if defined ( __CC_ARM )
- #define __ASM __asm /*!< asm keyword for ARM Compiler */
- #define __INLINE __inline /*!< inline keyword for ARM Compiler */
-
-#elif defined ( __ICCARM__ )
- #define __ASM __asm /*!< asm keyword for IAR Compiler */
- #define __INLINE inline /*!< inline keyword for IAR Compiler. Only avaiable in High optimization mode! */
-
-#elif defined ( __GNUC__ )
- #define __ASM __asm /*!< asm keyword for GNU Compiler */
- #define __INLINE inline /*!< inline keyword for GNU Compiler */
-
-#elif defined ( __TASKING__ )
- #define __ASM __asm /*!< asm keyword for TASKING Compiler */
- #define __INLINE inline /*!< inline keyword for TASKING Compiler */
-
-#endif
-
-
-/* ################### Compiler specific Intrinsics ########################### */
-
-#if defined ( __CC_ARM ) /*------------------RealView Compiler -----------------*/
-/* ARM armcc specific functions */
-
-#define __enable_fault_irq __enable_fiq
-#define __disable_fault_irq __disable_fiq
-
-#define __NOP __nop
-#define __WFI __wfi
-#define __WFE __wfe
-#define __SEV __sev
-#define __ISB() __isb(0)
-#define __DSB() __dsb(0)
-#define __DMB() __dmb(0)
-#define __REV __rev
-
-
-/* intrinsic void __enable_irq(); */
-/* intrinsic void __disable_irq(); */
-
-
-/**
- * @brief Return the Process Stack Pointer
- *
- * @return ProcessStackPointer
- *
- * Return the actual process stack pointer
- */
-extern uint32_t __get_PSP(void);
-
-/**
- * @brief Set the Process Stack Pointer
- *
- * @param topOfProcStack Process Stack Pointer
- *
- * Assign the value ProcessStackPointer to the MSP
- * (process stack pointer) Cortex processor register
- */
-extern void __set_PSP(uint32_t topOfProcStack);
-
-/**
- * @brief Return the Main Stack Pointer
- *
- * @return Main Stack Pointer
- *
- * Return the current value of the MSP (main stack pointer)
- * Cortex processor register
- */
-extern uint32_t __get_MSP(void);
-
-/**
- * @brief Set the Main Stack Pointer
- *
- * @param topOfMainStack Main Stack Pointer
- *
- * Assign the value mainStackPointer to the MSP
- * (main stack pointer) Cortex processor register
- */
-extern void __set_MSP(uint32_t topOfMainStack);
-
-/**
- * @brief Reverse byte order in unsigned short value
- *
- * @param value value to reverse
- * @return reversed value
- *
- * Reverse byte order in unsigned short value
- */
-extern uint32_t __REV16(uint16_t value);
-
-/**
- * @brief Reverse byte order in signed short value with sign extension to integer
- *
- * @param value value to reverse
- * @return reversed value
- *
- * Reverse byte order in signed short value with sign extension to integer
- */
-extern int32_t __REVSH(int16_t value);
-
-
-#if (__ARMCC_VERSION < 400000)
-
-/**
- * @brief Return the Priority Mask value
- *
- * @return PriMask
- *
- * Return state of the priority mask bit from the priority mask register
- */
-extern uint32_t __get_PRIMASK(void);
-
-/**
- * @brief Set the Priority Mask value
- *
- * @param priMask PriMask
- *
- * Set the priority mask bit in the priority mask register
- */
-extern void __set_PRIMASK(uint32_t priMask);
-
-/**
- * @brief Return the Control Register value
- *
- * @return Control value
- *
- * Return the content of the control register
- */
-extern uint32_t __get_CONTROL(void);
-
-/**
- * @brief Set the Control Register value
- *
- * @param control Control value
- *
- * Set the control register
- */
-extern void __set_CONTROL(uint32_t control);
-
-#else /* (__ARMCC_VERSION >= 400000) */
-
-
-/**
- * @brief Return the Priority Mask value
- *
- * @return PriMask
- *
- * Return state of the priority mask bit from the priority mask register
- */
-static __INLINE uint32_t __get_PRIMASK(void)
-{
- register uint32_t __regPriMask __ASM("primask");
- return(__regPriMask);
-}
-
-/**
- * @brief Set the Priority Mask value
- *
- * @param priMask PriMask
- *
- * Set the priority mask bit in the priority mask register
- */
-static __INLINE void __set_PRIMASK(uint32_t priMask)
-{
- register uint32_t __regPriMask __ASM("primask");
- __regPriMask = (priMask);
-}
-
-/**
- * @brief Return the Control Register value
- *
- * @return Control value
- *
- * Return the content of the control register
- */
-static __INLINE uint32_t __get_CONTROL(void)
-{
- register uint32_t __regControl __ASM("control");
- return(__regControl);
-}
-
-/**
- * @brief Set the Control Register value
- *
- * @param control Control value
- *
- * Set the control register
- */
-static __INLINE void __set_CONTROL(uint32_t control)
-{
- register uint32_t __regControl __ASM("control");
- __regControl = control;
-}
-
-#endif /* __ARMCC_VERSION */
-
-
-
-#elif (defined (__ICCARM__)) /*------------------ ICC Compiler -------------------*/
-/* IAR iccarm specific functions */
-
-#define __enable_irq __enable_interrupt /*!< global Interrupt enable */
-#define __disable_irq __disable_interrupt /*!< global Interrupt disable */
-
-static __INLINE void __enable_fault_irq() { __ASM ("cpsie f"); }
-static __INLINE void __disable_fault_irq() { __ASM ("cpsid f"); }
-
-#define __NOP __no_operation /*!< no operation intrinsic in IAR Compiler */
-static __INLINE void __WFI() { __ASM ("wfi"); }
-static __INLINE void __WFE() { __ASM ("wfe"); }
-static __INLINE void __SEV() { __ASM ("sev"); }
-
-/* intrinsic void __ISB(void) */
-/* intrinsic void __DSB(void) */
-/* intrinsic void __DMB(void) */
-/* intrinsic void __set_PRIMASK(); */
-/* intrinsic void __get_PRIMASK(); */
-
-
-/* intrinsic uint32_t __REV(uint32_t value); */
-/* intrinsic uint32_t __REVSH(uint32_t value); */
-
-
-/**
- * @brief Return the Process Stack Pointer
- *
- * @return ProcessStackPointer
- *
- * Return the actual process stack pointer
- */
-//extern uint32_t __get_PSP(void);
-
-/**
- * @brief Set the Process Stack Pointer
- *
- * @param topOfProcStack Process Stack Pointer
- *
- * Assign the value ProcessStackPointer to the MSP
- * (process stack pointer) Cortex processor register
- */
-//extern void __set_PSP(uint32_t topOfProcStack);
-
-/**
- * @brief Return the Main Stack Pointer
- *
- * @return Main Stack Pointer
- *
- * Return the current value of the MSP (main stack pointer)
- * Cortex processor register
- */
-//extern uint32_t __get_MSP(void);
-
-/**
- * @brief Set the Main Stack Pointer
- *
- * @param topOfMainStack Main Stack Pointer
- *
- * Assign the value mainStackPointer to the MSP
- * (main stack pointer) Cortex processor register
- */
-//extern void __set_MSP(uint32_t topOfMainStack);
-
-/**
- * @brief Reverse byte order in unsigned short value
- *
- * @param value value to reverse
- * @return reversed value
- *
- * Reverse byte order in unsigned short value
- */
-//extern uint32_t __REV16(uint16_t value);
-
-
-
-
-
-#elif (defined (__GNUC__)) /*------------------ GNU Compiler ---------------------*/
-/* GNU gcc specific functions */
-
-static __INLINE void __enable_irq(void) { __ASM volatile ("cpsie i"); }
-static __INLINE void __disable_irq(void) { __ASM volatile ("cpsid i"); }
-
-static __INLINE void __enable_fault_irq(void) { __ASM volatile ("cpsie f"); }
-static __INLINE void __disable_fault_irq(void) { __ASM volatile ("cpsid f"); }
-
-static __INLINE void __NOP(void) { __ASM volatile ("nop"); }
-static __INLINE void __WFI(void) { __ASM volatile ("wfi"); }
-static __INLINE void __WFE(void) { __ASM volatile ("wfe"); }
-static __INLINE void __SEV(void) { __ASM volatile ("sev"); }
-static __INLINE void __ISB(void) { __ASM volatile ("isb"); }
-static __INLINE void __DSB(void) { __ASM volatile ("dsb"); }
-static __INLINE void __DMB(void) { __ASM volatile ("dmb"); }
-
-
-/**
- * @brief Return the Process Stack Pointer
- *
- * @return ProcessStackPointer
- *
- * Return the actual process stack pointer
- */
-extern uint32_t __get_PSP(void);
-
-/**
- * @brief Set the Process Stack Pointer
- *
- * @param topOfProcStack Process Stack Pointer
- *
- * Assign the value ProcessStackPointer to the MSP
- * (process stack pointer) Cortex processor register
- */
-extern void __set_PSP(uint32_t topOfProcStack);
-
-/**
- * @brief Return the Main Stack Pointer
- *
- * @return Main Stack Pointer
- *
- * Return the current value of the MSP (main stack pointer)
- * Cortex processor register
- */
-extern uint32_t __get_MSP(void);
-
-/**
- * @brief Set the Main Stack Pointer
- *
- * @param topOfMainStack Main Stack Pointer
- *
- * Assign the value mainStackPointer to the MSP
- * (main stack pointer) Cortex processor register
- */
-extern void __set_MSP(uint32_t topOfMainStack);
-
-/**
- * @brief Return the Priority Mask value
- *
- * @return PriMask
- *
- * Return state of the priority mask bit from the priority mask register
- */
-extern uint32_t __get_PRIMASK(void);
-
-/**
- * @brief Set the Priority Mask value
- *
- * @param priMask PriMask
- *
- * Set the priority mask bit in the priority mask register
- */
-extern void __set_PRIMASK(uint32_t priMask);
-
-/**
- * @brief Return the Control Register value
-*
-* @return Control value
- *
- * Return the content of the control register
- */
-extern uint32_t __get_CONTROL(void);
-
-/**
- * @brief Set the Control Register value
- *
- * @param control Control value
- *
- * Set the control register
- */
-extern void __set_CONTROL(uint32_t control);
-
-/**
- * @brief Reverse byte order in integer value
- *
- * @param value value to reverse
- * @return reversed value
- *
- * Reverse byte order in integer value
- */
-extern uint32_t __REV(uint32_t value);
-
-/**
- * @brief Reverse byte order in unsigned short value
- *
- * @param value value to reverse
- * @return reversed value
- *
- * Reverse byte order in unsigned short value
- */
-extern uint32_t __REV16(uint16_t value);
-
-/**
- * @brief Reverse byte order in signed short value with sign extension to integer
- *
- * @param value value to reverse
- * @return reversed value
- *
- * Reverse byte order in signed short value with sign extension to integer
- */
-extern int32_t __REVSH(int16_t value);
-
-
-#elif (defined (__TASKING__)) /*------------------ TASKING Compiler ---------------------*/
-/* TASKING carm specific functions */
-
-/*
- * The CMSIS functions have been implemented as intrinsics in the compiler.
- * Please use "carm -?i" to get an up to date list of all instrinsics,
- * Including the CMSIS ones.
- */
-
-#endif
-
-
-/** @addtogroup CMSIS_CM0_Core_FunctionInterface CMSIS CM0 Core Function Interface
- Core Function Interface containing:
- - Core NVIC Functions
- - Core SysTick Functions
- - Core Reset Functions
-*/
-/*@{*/
-
-/* ########################## NVIC functions #################################### */
-
-/* Interrupt Priorities are WORD accessible only under ARMv6M */
-/* The following MACROS handle generation of the register offset and byte masks */
-#define _BIT_SHIFT(IRQn) ( (((uint32_t)(IRQn) ) & 0x03) * 8 )
-#define _SHP_IDX(IRQn) ( ((((uint32_t)(IRQn) & 0x0F)-8) >> 2) )
-#define _IP_IDX(IRQn) ( ((uint32_t)(IRQn) >> 2) )
-
-
-/**
- * @brief Enable Interrupt in NVIC Interrupt Controller
- *
- * @param IRQn The positive number of the external interrupt to enable
- *
- * Enable a device specific interupt in the NVIC interrupt controller.
- * The interrupt number cannot be a negative value.
- */
-static __INLINE void NVIC_EnableIRQ(IRQn_Type IRQn)
-{
- NVIC->ISER[0] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* enable interrupt */
-}
-
-/**
- * @brief Disable the interrupt line for external interrupt specified
- *
- * @param IRQn The positive number of the external interrupt to disable
- *
- * Disable a device specific interupt in the NVIC interrupt controller.
- * The interrupt number cannot be a negative value.
- */
-static __INLINE void NVIC_DisableIRQ(IRQn_Type IRQn)
-{
- NVIC->ICER[0] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* disable interrupt */
-}
-
-/**
- * @brief Read the interrupt pending bit for a device specific interrupt source
- *
- * @param IRQn The number of the device specifc interrupt
- * @return 1 = interrupt pending, 0 = interrupt not pending
- *
- * Read the pending register in NVIC and return 1 if its status is pending,
- * otherwise it returns 0
- */
-static __INLINE uint32_t NVIC_GetPendingIRQ(IRQn_Type IRQn)
-{
- return((uint32_t) ((NVIC->ISPR[0] & (1 << ((uint32_t)(IRQn) & 0x1F)))?1:0)); /* Return 1 if pending else 0 */
-}
-
-/**
- * @brief Set the pending bit for an external interrupt
- *
- * @param IRQn The number of the interrupt for set pending
- *
- * Set the pending bit for the specified interrupt.
- * The interrupt number cannot be a negative value.
- */
-static __INLINE void NVIC_SetPendingIRQ(IRQn_Type IRQn)
-{
- NVIC->ISPR[0] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* set interrupt pending */
-}
-
-/**
- * @brief Clear the pending bit for an external interrupt
- *
- * @param IRQn The number of the interrupt for clear pending
- *
- * Clear the pending bit for the specified interrupt.
- * The interrupt number cannot be a negative value.
- */
-static __INLINE void NVIC_ClearPendingIRQ(IRQn_Type IRQn)
-{
- NVIC->ICPR[0] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* Clear pending interrupt */
-}
-
-/**
- * @brief Set the priority for an interrupt
- *
- * @param IRQn The number of the interrupt for set priority
- * @param priority The priority to set
- *
- * Set the priority for the specified interrupt. The interrupt
- * number can be positive to specify an external (device specific)
- * interrupt, or negative to specify an internal (core) interrupt.
- *
- * Note: The priority cannot be set for every core interrupt.
- */
-static __INLINE void NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority)
-{
- if(IRQn < 0) {
- SCB->SHP[_SHP_IDX(IRQn)] = (SCB->SHP[_SHP_IDX(IRQn)] & ~(0xFF << _BIT_SHIFT(IRQn))) |
- (((priority << (8 - __NVIC_PRIO_BITS)) & 0xFF) << _BIT_SHIFT(IRQn)); }
- else {
- NVIC->IPR[_IP_IDX(IRQn)] = (NVIC->IPR[_IP_IDX(IRQn)] & ~(0xFF << _BIT_SHIFT(IRQn))) |
- (((priority << (8 - __NVIC_PRIO_BITS)) & 0xFF) << _BIT_SHIFT(IRQn)); }
-}
-
-/**
- * @brief Read the priority for an interrupt
- *
- * @param IRQn The number of the interrupt for get priority
- * @return The priority for the interrupt
- *
- * Read the priority for the specified interrupt. The interrupt
- * number can be positive to specify an external (device specific)
- * interrupt, or negative to specify an internal (core) interrupt.
- *
- * The returned priority value is automatically aligned to the implemented
- * priority bits of the microcontroller.
- *
- * Note: The priority cannot be set for every core interrupt.
- */
-static __INLINE uint32_t NVIC_GetPriority(IRQn_Type IRQn)
-{
-
- if(IRQn < 0) {
- return((uint32_t)((SCB->SHP[_SHP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) >> (8 - __NVIC_PRIO_BITS))); } /* get priority for Cortex-M0 system interrupts */
- else {
- return((uint32_t)((NVIC->IPR[_IP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) >> (8 - __NVIC_PRIO_BITS))); } /* get priority for device specific interrupts */
-}
-
-
-
-/* ################################## SysTick function ############################################ */
-
-#if (!defined (__Vendor_SysTickConfig)) || (__Vendor_SysTickConfig == 0)
-
-/**
- * @brief Initialize and start the SysTick counter and its interrupt.
- *
- * @param ticks number of ticks between two interrupts
- * @return 1 = failed, 0 = successful
- *
- * Initialise the system tick timer and its interrupt and start the
- * system tick timer / counter in free running mode to generate
- * periodical interrupts.
- */
-static __INLINE uint32_t SysTick_Config(uint32_t ticks)
-{
- if (ticks > SysTick_LOAD_RELOAD_Msk) return (1); /* Reload value impossible */
-
- SysTick->LOAD = (ticks & SysTick_LOAD_RELOAD_Msk) - 1; /* set reload register */
- NVIC_SetPriority (SysTick_IRQn, (1<<__NVIC_PRIO_BITS) - 1); /* set Priority for Cortex-M0 System Interrupts */
- SysTick->VAL = 0; /* Load the SysTick Counter Value */
- SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk |
- SysTick_CTRL_TICKINT_Msk |
- SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */
- return (0); /* Function successful */
-}
-
-#endif
-
-
-
-
-/* ################################## Reset function ############################################ */
-
-/**
- * @brief Initiate a system reset request.
- *
- * Initiate a system reset request to reset the MCU
- */
-static __INLINE void NVIC_SystemReset(void)
-{
- SCB->AIRCR = ((0x5FA << SCB_AIRCR_VECTKEY_Pos) |
- SCB_AIRCR_SYSRESETREQ_Msk);
- __DSB(); /* Ensure completion of memory access */
- while(1); /* wait until reset */
-}
-
-/*@}*/ /* end of group CMSIS_CM0_Core_FunctionInterface */
-
-#ifdef __cplusplus
-}
-#endif
-
-/*@}*/ /* end of group CMSIS_CM0_core_definitions */
-
-#endif /* __CM0_CORE_H__ */
-
-/*lint -restore */
diff --git a/os/hal/platforms/LPC11xx/pal_lld.c b/os/hal/platforms/LPC11xx/pal_lld.c index a78bf973f..b4332e3f9 100644 --- a/os/hal/platforms/LPC11xx/pal_lld.c +++ b/os/hal/platforms/LPC11xx/pal_lld.c @@ -87,7 +87,7 @@ void _pal_lld_init(const PALConfig *config) { */
void _pal_lld_setgroupmode(ioportid_t port,
ioportmask_t mask,
- uint_fast8_t mode) {
+ iomode_t mode) {
switch (mode) {
case PAL_MODE_RESET:
diff --git a/os/hal/platforms/LPC11xx/pal_lld.h b/os/hal/platforms/LPC11xx/pal_lld.h index ef3f41a43..b46362aeb 100644 --- a/os/hal/platforms/LPC11xx/pal_lld.h +++ b/os/hal/platforms/LPC11xx/pal_lld.h @@ -327,7 +327,7 @@ extern "C" { void _pal_lld_init(const PALConfig *config);
void _pal_lld_setgroupmode(ioportid_t port,
ioportmask_t mask,
- uint_fast8_t mode);
+ iomode_t mode);
#ifdef __cplusplus
}
#endif
diff --git a/os/hal/platforms/LPC13xx/core_cm3.h b/os/hal/platforms/LPC13xx/core_cm3.h deleted file mode 100644 index fbffa91dc..000000000 --- a/os/hal/platforms/LPC13xx/core_cm3.h +++ /dev/null @@ -1,1843 +0,0 @@ -/*
- ChibiOS/RT - Copyright (C) 2006,2007,2008,2009,2010,
- 2011 Giovanni Di Sirio.
-
- This file is part of ChibiOS/RT.
-
- ChibiOS/RT is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 3 of the License, or
- (at your option) any later version.
-
- ChibiOS/RT is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-
-/*
- * Parts of this files have been modified in ChibiOS/RT in order to fix
- * some code quality issues and conflicting declarations.
- */
-
-/**************************************************************************//**
- * @file core_cm3.h
- * @brief CMSIS Cortex-M3 Core Peripheral Access Layer Header File
- * @version V1.30
- * @date 30. October 2009
- *
- * @note
- * Copyright (C) 2009 ARM Limited. All rights reserved.
- *
- * @par
- * ARM Limited (ARM) is supplying this software for use with Cortex-M
- * processor based microcontrollers. This file can be freely distributed
- * within development tools that are supporting such ARM based processors.
- *
- * @par
- * THIS SOFTWARE IS PROVIDED "AS IS". NO WARRANTIES, WHETHER EXPRESS, IMPLIED
- * OR STATUTORY, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE.
- * ARM SHALL NOT, IN ANY CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR
- * CONSEQUENTIAL DAMAGES, FOR ANY REASON WHATSOEVER.
- *
- ******************************************************************************/
-
-#ifndef __CM3_CORE_H__
-#define __CM3_CORE_H__
-
-/** @addtogroup CMSIS_CM3_core_LintCinfiguration CMSIS CM3 Core Lint Configuration
- *
- * List of Lint messages which will be suppressed and not shown:
- * - Error 10: \n
- * register uint32_t __regBasePri __asm("basepri"); \n
- * Error 10: Expecting ';'
- * .
- * - Error 530: \n
- * return(__regBasePri); \n
- * Warning 530: Symbol '__regBasePri' (line 264) not initialized
- * .
- * - Error 550: \n
- * __regBasePri = (basePri & 0x1ff); \n
- * Warning 550: Symbol '__regBasePri' (line 271) not accessed
- * .
- * - Error 754: \n
- * uint32_t RESERVED0[24]; \n
- * Info 754: local structure member '<some, not used in the HAL>' (line 109, file ./cm3_core.h) not referenced
- * .
- * - Error 750: \n
- * #define __CM3_CORE_H__ \n
- * Info 750: local macro '__CM3_CORE_H__' (line 43, file./cm3_core.h) not referenced
- * .
- * - Error 528: \n
- * static __INLINE void NVIC_DisableIRQ(uint32_t IRQn) \n
- * Warning 528: Symbol 'NVIC_DisableIRQ(unsigned int)' (line 419, file ./cm3_core.h) not referenced
- * .
- * - Error 751: \n
- * } InterruptType_Type; \n
- * Info 751: local typedef 'InterruptType_Type' (line 170, file ./cm3_core.h) not referenced
- * .
- * Note: To re-enable a Message, insert a space before 'lint' *
- *
- */
-
-/*lint -save */
-/*lint -e10 */
-/*lint -e530 */
-/*lint -e550 */
-/*lint -e754 */
-/*lint -e750 */
-/*lint -e528 */
-/*lint -e751 */
-
-
-/** @addtogroup CMSIS_CM3_core_definitions CM3 Core Definitions
- This file defines all structures and symbols for CMSIS core:
- - CMSIS version number
- - Cortex-M core registers and bitfields
- - Cortex-M core peripheral base address
- @{
- */
-
-#ifdef __cplusplus
- extern "C" {
-#endif
-
-#define __CM3_CMSIS_VERSION_MAIN (0x01) /*!< [31:16] CMSIS HAL main version */
-#define __CM3_CMSIS_VERSION_SUB (0x30) /*!< [15:0] CMSIS HAL sub version */
-#define __CM3_CMSIS_VERSION ((__CM3_CMSIS_VERSION_MAIN << 16) | __CM3_CMSIS_VERSION_SUB) /*!< CMSIS HAL version number */
-
-#define __CORTEX_M (0x03) /*!< Cortex core */
-
-#include <stdint.h> /* Include standard types */
-
-#if defined (__ICCARM__)
- #include <intrinsics.h> /* IAR Intrinsics */
-#endif
-
-
-#ifndef __NVIC_PRIO_BITS
- #define __NVIC_PRIO_BITS 4 /*!< standard definition for NVIC Priority Bits */
-#endif
-
-
-
-
-/**
- * IO definitions
- *
- * define access restrictions to peripheral registers
- */
-
-#ifdef __cplusplus
- #define __I volatile /*!< defines 'read only' permissions */
-#else
- #define __I volatile const /*!< defines 'read only' permissions */
-#endif
-#define __O volatile /*!< defines 'write only' permissions */
-#define __IO volatile /*!< defines 'read / write' permissions */
-
-
-
-/*******************************************************************************
- * Register Abstraction
- ******************************************************************************/
-/** @addtogroup CMSIS_CM3_core_register CMSIS CM3 Core Register
- @{
-*/
-
-
-/** @addtogroup CMSIS_CM3_NVIC CMSIS CM3 NVIC
- memory mapped structure for Nested Vectored Interrupt Controller (NVIC)
- @{
- */
-typedef struct
-{
- __IO uint32_t ISER[8]; /*!< Offset: 0x000 Interrupt Set Enable Register */
- uint32_t RESERVED0[24];
- __IO uint32_t ICER[8]; /*!< Offset: 0x080 Interrupt Clear Enable Register */
- uint32_t RSERVED1[24];
- __IO uint32_t ISPR[8]; /*!< Offset: 0x100 Interrupt Set Pending Register */
- uint32_t RESERVED2[24];
- __IO uint32_t ICPR[8]; /*!< Offset: 0x180 Interrupt Clear Pending Register */
- uint32_t RESERVED3[24];
- __IO uint32_t IABR[8]; /*!< Offset: 0x200 Interrupt Active bit Register */
- uint32_t RESERVED4[56];
- __IO uint8_t IP[240]; /*!< Offset: 0x300 Interrupt Priority Register (8Bit wide) */
- uint32_t RESERVED5[644];
- __O uint32_t STIR; /*!< Offset: 0xE00 Software Trigger Interrupt Register */
-} NVIC_Type;
-/*@}*/ /* end of group CMSIS_CM3_NVIC */
-
-
-/** @addtogroup CMSIS_CM3_SCB CMSIS CM3 SCB
- memory mapped structure for System Control Block (SCB)
- @{
- */
-typedef struct
-{
- __I uint32_t CPUID; /*!< Offset: 0x00 CPU ID Base Register */
- __IO uint32_t ICSR; /*!< Offset: 0x04 Interrupt Control State Register */
- __IO uint32_t VTOR; /*!< Offset: 0x08 Vector Table Offset Register */
- __IO uint32_t AIRCR; /*!< Offset: 0x0C Application Interrupt / Reset Control Register */
- __IO uint32_t SCR; /*!< Offset: 0x10 System Control Register */
- __IO uint32_t CCR; /*!< Offset: 0x14 Configuration Control Register */
- __IO uint8_t SHP[12]; /*!< Offset: 0x18 System Handlers Priority Registers (4-7, 8-11, 12-15) */
- __IO uint32_t SHCSR; /*!< Offset: 0x24 System Handler Control and State Register */
- __IO uint32_t CFSR; /*!< Offset: 0x28 Configurable Fault Status Register */
- __IO uint32_t HFSR; /*!< Offset: 0x2C Hard Fault Status Register */
- __IO uint32_t DFSR; /*!< Offset: 0x30 Debug Fault Status Register */
- __IO uint32_t MMFAR; /*!< Offset: 0x34 Mem Manage Address Register */
- __IO uint32_t BFAR; /*!< Offset: 0x38 Bus Fault Address Register */
- __IO uint32_t AFSR; /*!< Offset: 0x3C Auxiliary Fault Status Register */
- __I uint32_t PFR[2]; /*!< Offset: 0x40 Processor Feature Register */
- __I uint32_t DFR; /*!< Offset: 0x48 Debug Feature Register */
- __I uint32_t ADR; /*!< Offset: 0x4C Auxiliary Feature Register */
- __I uint32_t MMFR[4]; /*!< Offset: 0x50 Memory Model Feature Register */
- __I uint32_t ISAR[5]; /*!< Offset: 0x60 ISA Feature Register */
-} SCB_Type;
-
-/* SCB CPUID Register Definitions */
-#define SCB_CPUID_IMPLEMENTER_Pos 24 /*!< SCB CPUID: IMPLEMENTER Position */
-#define SCB_CPUID_IMPLEMENTER_Msk (0xFFul << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */
-
-#define SCB_CPUID_VARIANT_Pos 20 /*!< SCB CPUID: VARIANT Position */
-#define SCB_CPUID_VARIANT_Msk (0xFul << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */
-
-#define SCB_CPUID_PARTNO_Pos 4 /*!< SCB CPUID: PARTNO Position */
-#define SCB_CPUID_PARTNO_Msk (0xFFFul << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */
-
-#define SCB_CPUID_REVISION_Pos 0 /*!< SCB CPUID: REVISION Position */
-#define SCB_CPUID_REVISION_Msk (0xFul << SCB_CPUID_REVISION_Pos) /*!< SCB CPUID: REVISION Mask */
-
-/* SCB Interrupt Control State Register Definitions */
-#define SCB_ICSR_NMIPENDSET_Pos 31 /*!< SCB ICSR: NMIPENDSET Position */
-#define SCB_ICSR_NMIPENDSET_Msk (1ul << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */
-
-#define SCB_ICSR_PENDSVSET_Pos 28 /*!< SCB ICSR: PENDSVSET Position */
-#define SCB_ICSR_PENDSVSET_Msk (1ul << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */
-
-#define SCB_ICSR_PENDSVCLR_Pos 27 /*!< SCB ICSR: PENDSVCLR Position */
-#define SCB_ICSR_PENDSVCLR_Msk (1ul << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */
-
-#define SCB_ICSR_PENDSTSET_Pos 26 /*!< SCB ICSR: PENDSTSET Position */
-#define SCB_ICSR_PENDSTSET_Msk (1ul << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */
-
-#define SCB_ICSR_PENDSTCLR_Pos 25 /*!< SCB ICSR: PENDSTCLR Position */
-#define SCB_ICSR_PENDSTCLR_Msk (1ul << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */
-
-#define SCB_ICSR_ISRPREEMPT_Pos 23 /*!< SCB ICSR: ISRPREEMPT Position */
-#define SCB_ICSR_ISRPREEMPT_Msk (1ul << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */
-
-#define SCB_ICSR_ISRPENDING_Pos 22 /*!< SCB ICSR: ISRPENDING Position */
-#define SCB_ICSR_ISRPENDING_Msk (1ul << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */
-
-#define SCB_ICSR_VECTPENDING_Pos 12 /*!< SCB ICSR: VECTPENDING Position */
-#define SCB_ICSR_VECTPENDING_Msk (0x1FFul << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */
-
-#define SCB_ICSR_RETTOBASE_Pos 11 /*!< SCB ICSR: RETTOBASE Position */
-#define SCB_ICSR_RETTOBASE_Msk (1ul << SCB_ICSR_RETTOBASE_Pos) /*!< SCB ICSR: RETTOBASE Mask */
-
-#define SCB_ICSR_VECTACTIVE_Pos 0 /*!< SCB ICSR: VECTACTIVE Position */
-#define SCB_ICSR_VECTACTIVE_Msk (0x1FFul << SCB_ICSR_VECTACTIVE_Pos) /*!< SCB ICSR: VECTACTIVE Mask */
-
-/* SCB Interrupt Control State Register Definitions */
-#define SCB_VTOR_TBLBASE_Pos 29 /*!< SCB VTOR: TBLBASE Position */
-#define SCB_VTOR_TBLBASE_Msk (0x1FFul << SCB_VTOR_TBLBASE_Pos) /*!< SCB VTOR: TBLBASE Mask */
-
-#define SCB_VTOR_TBLOFF_Pos 7 /*!< SCB VTOR: TBLOFF Position */
-#define SCB_VTOR_TBLOFF_Msk (0x3FFFFFul << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */
-
-/* SCB Application Interrupt and Reset Control Register Definitions */
-#define SCB_AIRCR_VECTKEY_Pos 16 /*!< SCB AIRCR: VECTKEY Position */
-#define SCB_AIRCR_VECTKEY_Msk (0xFFFFul << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */
-
-#define SCB_AIRCR_VECTKEYSTAT_Pos 16 /*!< SCB AIRCR: VECTKEYSTAT Position */
-#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFul << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */
-
-#define SCB_AIRCR_ENDIANESS_Pos 15 /*!< SCB AIRCR: ENDIANESS Position */
-#define SCB_AIRCR_ENDIANESS_Msk (1ul << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */
-
-#define SCB_AIRCR_PRIGROUP_Pos 8 /*!< SCB AIRCR: PRIGROUP Position */
-#define SCB_AIRCR_PRIGROUP_Msk (7ul << SCB_AIRCR_PRIGROUP_Pos) /*!< SCB AIRCR: PRIGROUP Mask */
-
-#define SCB_AIRCR_SYSRESETREQ_Pos 2 /*!< SCB AIRCR: SYSRESETREQ Position */
-#define SCB_AIRCR_SYSRESETREQ_Msk (1ul << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */
-
-#define SCB_AIRCR_VECTCLRACTIVE_Pos 1 /*!< SCB AIRCR: VECTCLRACTIVE Position */
-#define SCB_AIRCR_VECTCLRACTIVE_Msk (1ul << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */
-
-#define SCB_AIRCR_VECTRESET_Pos 0 /*!< SCB AIRCR: VECTRESET Position */
-#define SCB_AIRCR_VECTRESET_Msk (1ul << SCB_AIRCR_VECTRESET_Pos) /*!< SCB AIRCR: VECTRESET Mask */
-
-/* SCB System Control Register Definitions */
-#define SCB_SCR_SEVONPEND_Pos 4 /*!< SCB SCR: SEVONPEND Position */
-#define SCB_SCR_SEVONPEND_Msk (1ul << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */
-
-#define SCB_SCR_SLEEPDEEP_Pos 2 /*!< SCB SCR: SLEEPDEEP Position */
-#define SCB_SCR_SLEEPDEEP_Msk (1ul << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */
-
-#define SCB_SCR_SLEEPONEXIT_Pos 1 /*!< SCB SCR: SLEEPONEXIT Position */
-#define SCB_SCR_SLEEPONEXIT_Msk (1ul << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */
-
-/* SCB Configuration Control Register Definitions */
-#define SCB_CCR_STKALIGN_Pos 9 /*!< SCB CCR: STKALIGN Position */
-#define SCB_CCR_STKALIGN_Msk (1ul << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */
-
-#define SCB_CCR_BFHFNMIGN_Pos 8 /*!< SCB CCR: BFHFNMIGN Position */
-#define SCB_CCR_BFHFNMIGN_Msk (1ul << SCB_CCR_BFHFNMIGN_Pos) /*!< SCB CCR: BFHFNMIGN Mask */
-
-#define SCB_CCR_DIV_0_TRP_Pos 4 /*!< SCB CCR: DIV_0_TRP Position */
-#define SCB_CCR_DIV_0_TRP_Msk (1ul << SCB_CCR_DIV_0_TRP_Pos) /*!< SCB CCR: DIV_0_TRP Mask */
-
-#define SCB_CCR_UNALIGN_TRP_Pos 3 /*!< SCB CCR: UNALIGN_TRP Position */
-#define SCB_CCR_UNALIGN_TRP_Msk (1ul << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */
-
-#define SCB_CCR_USERSETMPEND_Pos 1 /*!< SCB CCR: USERSETMPEND Position */
-#define SCB_CCR_USERSETMPEND_Msk (1ul << SCB_CCR_USERSETMPEND_Pos) /*!< SCB CCR: USERSETMPEND Mask */
-
-#define SCB_CCR_NONBASETHRDENA_Pos 0 /*!< SCB CCR: NONBASETHRDENA Position */
-#define SCB_CCR_NONBASETHRDENA_Msk (1ul << SCB_CCR_NONBASETHRDENA_Pos) /*!< SCB CCR: NONBASETHRDENA Mask */
-
-/* SCB System Handler Control and State Register Definitions */
-#define SCB_SHCSR_USGFAULTENA_Pos 18 /*!< SCB SHCSR: USGFAULTENA Position */
-#define SCB_SHCSR_USGFAULTENA_Msk (1ul << SCB_SHCSR_USGFAULTENA_Pos) /*!< SCB SHCSR: USGFAULTENA Mask */
-
-#define SCB_SHCSR_BUSFAULTENA_Pos 17 /*!< SCB SHCSR: BUSFAULTENA Position */
-#define SCB_SHCSR_BUSFAULTENA_Msk (1ul << SCB_SHCSR_BUSFAULTENA_Pos) /*!< SCB SHCSR: BUSFAULTENA Mask */
-
-#define SCB_SHCSR_MEMFAULTENA_Pos 16 /*!< SCB SHCSR: MEMFAULTENA Position */
-#define SCB_SHCSR_MEMFAULTENA_Msk (1ul << SCB_SHCSR_MEMFAULTENA_Pos) /*!< SCB SHCSR: MEMFAULTENA Mask */
-
-#define SCB_SHCSR_SVCALLPENDED_Pos 15 /*!< SCB SHCSR: SVCALLPENDED Position */
-#define SCB_SHCSR_SVCALLPENDED_Msk (1ul << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */
-
-#define SCB_SHCSR_BUSFAULTPENDED_Pos 14 /*!< SCB SHCSR: BUSFAULTPENDED Position */
-#define SCB_SHCSR_BUSFAULTPENDED_Msk (1ul << SCB_SHCSR_BUSFAULTPENDED_Pos) /*!< SCB SHCSR: BUSFAULTPENDED Mask */
-
-#define SCB_SHCSR_MEMFAULTPENDED_Pos 13 /*!< SCB SHCSR: MEMFAULTPENDED Position */
-#define SCB_SHCSR_MEMFAULTPENDED_Msk (1ul << SCB_SHCSR_MEMFAULTPENDED_Pos) /*!< SCB SHCSR: MEMFAULTPENDED Mask */
-
-#define SCB_SHCSR_USGFAULTPENDED_Pos 12 /*!< SCB SHCSR: USGFAULTPENDED Position */
-#define SCB_SHCSR_USGFAULTPENDED_Msk (1ul << SCB_SHCSR_USGFAULTPENDED_Pos) /*!< SCB SHCSR: USGFAULTPENDED Mask */
-
-#define SCB_SHCSR_SYSTICKACT_Pos 11 /*!< SCB SHCSR: SYSTICKACT Position */
-#define SCB_SHCSR_SYSTICKACT_Msk (1ul << SCB_SHCSR_SYSTICKACT_Pos) /*!< SCB SHCSR: SYSTICKACT Mask */
-
-#define SCB_SHCSR_PENDSVACT_Pos 10 /*!< SCB SHCSR: PENDSVACT Position */
-#define SCB_SHCSR_PENDSVACT_Msk (1ul << SCB_SHCSR_PENDSVACT_Pos) /*!< SCB SHCSR: PENDSVACT Mask */
-
-#define SCB_SHCSR_MONITORACT_Pos 8 /*!< SCB SHCSR: MONITORACT Position */
-#define SCB_SHCSR_MONITORACT_Msk (1ul << SCB_SHCSR_MONITORACT_Pos) /*!< SCB SHCSR: MONITORACT Mask */
-
-#define SCB_SHCSR_SVCALLACT_Pos 7 /*!< SCB SHCSR: SVCALLACT Position */
-#define SCB_SHCSR_SVCALLACT_Msk (1ul << SCB_SHCSR_SVCALLACT_Pos) /*!< SCB SHCSR: SVCALLACT Mask */
-
-#define SCB_SHCSR_USGFAULTACT_Pos 3 /*!< SCB SHCSR: USGFAULTACT Position */
-#define SCB_SHCSR_USGFAULTACT_Msk (1ul << SCB_SHCSR_USGFAULTACT_Pos) /*!< SCB SHCSR: USGFAULTACT Mask */
-
-#define SCB_SHCSR_BUSFAULTACT_Pos 1 /*!< SCB SHCSR: BUSFAULTACT Position */
-#define SCB_SHCSR_BUSFAULTACT_Msk (1ul << SCB_SHCSR_BUSFAULTACT_Pos) /*!< SCB SHCSR: BUSFAULTACT Mask */
-
-#define SCB_SHCSR_MEMFAULTACT_Pos 0 /*!< SCB SHCSR: MEMFAULTACT Position */
-#define SCB_SHCSR_MEMFAULTACT_Msk (1ul << SCB_SHCSR_MEMFAULTACT_Pos) /*!< SCB SHCSR: MEMFAULTACT Mask */
-
-/* SCB Configurable Fault Status Registers Definitions */
-#define SCB_CFSR_USGFAULTSR_Pos 16 /*!< SCB CFSR: Usage Fault Status Register Position */
-#define SCB_CFSR_USGFAULTSR_Msk (0xFFFFul << SCB_CFSR_USGFAULTSR_Pos) /*!< SCB CFSR: Usage Fault Status Register Mask */
-
-#define SCB_CFSR_BUSFAULTSR_Pos 8 /*!< SCB CFSR: Bus Fault Status Register Position */
-#define SCB_CFSR_BUSFAULTSR_Msk (0xFFul << SCB_CFSR_BUSFAULTSR_Pos) /*!< SCB CFSR: Bus Fault Status Register Mask */
-
-#define SCB_CFSR_MEMFAULTSR_Pos 0 /*!< SCB CFSR: Memory Manage Fault Status Register Position */
-#define SCB_CFSR_MEMFAULTSR_Msk (0xFFul << SCB_CFSR_MEMFAULTSR_Pos) /*!< SCB CFSR: Memory Manage Fault Status Register Mask */
-
-/* SCB Hard Fault Status Registers Definitions */
-#define SCB_HFSR_DEBUGEVT_Pos 31 /*!< SCB HFSR: DEBUGEVT Position */
-#define SCB_HFSR_DEBUGEVT_Msk (1ul << SCB_HFSR_DEBUGEVT_Pos) /*!< SCB HFSR: DEBUGEVT Mask */
-
-#define SCB_HFSR_FORCED_Pos 30 /*!< SCB HFSR: FORCED Position */
-#define SCB_HFSR_FORCED_Msk (1ul << SCB_HFSR_FORCED_Pos) /*!< SCB HFSR: FORCED Mask */
-
-#define SCB_HFSR_VECTTBL_Pos 1 /*!< SCB HFSR: VECTTBL Position */
-#define SCB_HFSR_VECTTBL_Msk (1ul << SCB_HFSR_VECTTBL_Pos) /*!< SCB HFSR: VECTTBL Mask */
-
-/* SCB Debug Fault Status Register Definitions */
-#define SCB_DFSR_EXTERNAL_Pos 4 /*!< SCB DFSR: EXTERNAL Position */
-#define SCB_DFSR_EXTERNAL_Msk (1ul << SCB_DFSR_EXTERNAL_Pos) /*!< SCB DFSR: EXTERNAL Mask */
-
-#define SCB_DFSR_VCATCH_Pos 3 /*!< SCB DFSR: VCATCH Position */
-#define SCB_DFSR_VCATCH_Msk (1ul << SCB_DFSR_VCATCH_Pos) /*!< SCB DFSR: VCATCH Mask */
-
-#define SCB_DFSR_DWTTRAP_Pos 2 /*!< SCB DFSR: DWTTRAP Position */
-#define SCB_DFSR_DWTTRAP_Msk (1ul << SCB_DFSR_DWTTRAP_Pos) /*!< SCB DFSR: DWTTRAP Mask */
-
-#define SCB_DFSR_BKPT_Pos 1 /*!< SCB DFSR: BKPT Position */
-#define SCB_DFSR_BKPT_Msk (1ul << SCB_DFSR_BKPT_Pos) /*!< SCB DFSR: BKPT Mask */
-
-#define SCB_DFSR_HALTED_Pos 0 /*!< SCB DFSR: HALTED Position */
-#define SCB_DFSR_HALTED_Msk (1ul << SCB_DFSR_HALTED_Pos) /*!< SCB DFSR: HALTED Mask */
-/*@}*/ /* end of group CMSIS_CM3_SCB */
-
-
-/** @addtogroup CMSIS_CM3_SysTick CMSIS CM3 SysTick
- memory mapped structure for SysTick
- @{
- */
-typedef struct
-{
- __IO uint32_t CTRL; /*!< Offset: 0x00 SysTick Control and Status Register */
- __IO uint32_t LOAD; /*!< Offset: 0x04 SysTick Reload Value Register */
- __IO uint32_t VAL; /*!< Offset: 0x08 SysTick Current Value Register */
- __I uint32_t CALIB; /*!< Offset: 0x0C SysTick Calibration Register */
-} SysTick_Type;
-
-/* SysTick Control / Status Register Definitions */
-#define SysTick_CTRL_COUNTFLAG_Pos 16 /*!< SysTick CTRL: COUNTFLAG Position */
-#define SysTick_CTRL_COUNTFLAG_Msk (1ul << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */
-
-#define SysTick_CTRL_CLKSOURCE_Pos 2 /*!< SysTick CTRL: CLKSOURCE Position */
-#define SysTick_CTRL_CLKSOURCE_Msk (1ul << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */
-
-#define SysTick_CTRL_TICKINT_Pos 1 /*!< SysTick CTRL: TICKINT Position */
-#define SysTick_CTRL_TICKINT_Msk (1ul << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */
-
-#define SysTick_CTRL_ENABLE_Pos 0 /*!< SysTick CTRL: ENABLE Position */
-#define SysTick_CTRL_ENABLE_Msk (1ul << SysTick_CTRL_ENABLE_Pos) /*!< SysTick CTRL: ENABLE Mask */
-
-/* SysTick Reload Register Definitions */
-#define SysTick_LOAD_RELOAD_Pos 0 /*!< SysTick LOAD: RELOAD Position */
-#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFul << SysTick_LOAD_RELOAD_Pos) /*!< SysTick LOAD: RELOAD Mask */
-
-/* SysTick Current Register Definitions */
-#define SysTick_VAL_CURRENT_Pos 0 /*!< SysTick VAL: CURRENT Position */
-#define SysTick_VAL_CURRENT_Msk (0xFFFFFFul << SysTick_VAL_CURRENT_Pos) /*!< SysTick VAL: CURRENT Mask */
-
-/* SysTick Calibration Register Definitions */
-#define SysTick_CALIB_NOREF_Pos 31 /*!< SysTick CALIB: NOREF Position */
-#define SysTick_CALIB_NOREF_Msk (1ul << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */
-
-#define SysTick_CALIB_SKEW_Pos 30 /*!< SysTick CALIB: SKEW Position */
-#define SysTick_CALIB_SKEW_Msk (1ul << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */
-
-#define SysTick_CALIB_TENMS_Pos 0 /*!< SysTick CALIB: TENMS Position */
-#define SysTick_CALIB_TENMS_Msk (0xFFFFFFul << SysTick_VAL_CURRENT_Pos) /*!< SysTick CALIB: TENMS Mask */
-/*@}*/ /* end of group CMSIS_CM3_SysTick */
-
-
-/** @addtogroup CMSIS_CM3_ITM CMSIS CM3 ITM
- memory mapped structure for Instrumentation Trace Macrocell (ITM)
- @{
- */
-typedef struct
-{
- __O union
- {
- __O uint8_t u8; /*!< Offset: ITM Stimulus Port 8-bit */
- __O uint16_t u16; /*!< Offset: ITM Stimulus Port 16-bit */
- __O uint32_t u32; /*!< Offset: ITM Stimulus Port 32-bit */
- } PORT [32]; /*!< Offset: 0x00 ITM Stimulus Port Registers */
- uint32_t RESERVED0[864];
- __IO uint32_t TER; /*!< Offset: ITM Trace Enable Register */
- uint32_t RESERVED1[15];
- __IO uint32_t TPR; /*!< Offset: ITM Trace Privilege Register */
- uint32_t RESERVED2[15];
- __IO uint32_t TCR; /*!< Offset: ITM Trace Control Register */
- uint32_t RESERVED3[29];
- __IO uint32_t IWR; /*!< Offset: ITM Integration Write Register */
- __IO uint32_t IRR; /*!< Offset: ITM Integration Read Register */
- __IO uint32_t IMCR; /*!< Offset: ITM Integration Mode Control Register */
- uint32_t RESERVED4[43];
- __IO uint32_t LAR; /*!< Offset: ITM Lock Access Register */
- __IO uint32_t LSR; /*!< Offset: ITM Lock Status Register */
- uint32_t RESERVED5[6];
- __I uint32_t PID4; /*!< Offset: ITM Peripheral Identification Register #4 */
- __I uint32_t PID5; /*!< Offset: ITM Peripheral Identification Register #5 */
- __I uint32_t PID6; /*!< Offset: ITM Peripheral Identification Register #6 */
- __I uint32_t PID7; /*!< Offset: ITM Peripheral Identification Register #7 */
- __I uint32_t PID0; /*!< Offset: ITM Peripheral Identification Register #0 */
- __I uint32_t PID1; /*!< Offset: ITM Peripheral Identification Register #1 */
- __I uint32_t PID2; /*!< Offset: ITM Peripheral Identification Register #2 */
- __I uint32_t PID3; /*!< Offset: ITM Peripheral Identification Register #3 */
- __I uint32_t CID0; /*!< Offset: ITM Component Identification Register #0 */
- __I uint32_t CID1; /*!< Offset: ITM Component Identification Register #1 */
- __I uint32_t CID2; /*!< Offset: ITM Component Identification Register #2 */
- __I uint32_t CID3; /*!< Offset: ITM Component Identification Register #3 */
-} ITM_Type;
-
-/* ITM Trace Privilege Register Definitions */
-#define ITM_TPR_PRIVMASK_Pos 0 /*!< ITM TPR: PRIVMASK Position */
-#define ITM_TPR_PRIVMASK_Msk (0xFul << ITM_TPR_PRIVMASK_Pos) /*!< ITM TPR: PRIVMASK Mask */
-
-/* ITM Trace Control Register Definitions */
-#define ITM_TCR_BUSY_Pos 23 /*!< ITM TCR: BUSY Position */
-#define ITM_TCR_BUSY_Msk (1ul << ITM_TCR_BUSY_Pos) /*!< ITM TCR: BUSY Mask */
-
-#define ITM_TCR_ATBID_Pos 16 /*!< ITM TCR: ATBID Position */
-#define ITM_TCR_ATBID_Msk (0x7Ful << ITM_TCR_ATBID_Pos) /*!< ITM TCR: ATBID Mask */
-
-#define ITM_TCR_TSPrescale_Pos 8 /*!< ITM TCR: TSPrescale Position */
-#define ITM_TCR_TSPrescale_Msk (3ul << ITM_TCR_TSPrescale_Pos) /*!< ITM TCR: TSPrescale Mask */
-
-#define ITM_TCR_SWOENA_Pos 4 /*!< ITM TCR: SWOENA Position */
-#define ITM_TCR_SWOENA_Msk (1ul << ITM_TCR_SWOENA_Pos) /*!< ITM TCR: SWOENA Mask */
-
-#define ITM_TCR_DWTENA_Pos 3 /*!< ITM TCR: DWTENA Position */
-#define ITM_TCR_DWTENA_Msk (1ul << ITM_TCR_DWTENA_Pos) /*!< ITM TCR: DWTENA Mask */
-
-#define ITM_TCR_SYNCENA_Pos 2 /*!< ITM TCR: SYNCENA Position */
-#define ITM_TCR_SYNCENA_Msk (1ul << ITM_TCR_SYNCENA_Pos) /*!< ITM TCR: SYNCENA Mask */
-
-#define ITM_TCR_TSENA_Pos 1 /*!< ITM TCR: TSENA Position */
-#define ITM_TCR_TSENA_Msk (1ul << ITM_TCR_TSENA_Pos) /*!< ITM TCR: TSENA Mask */
-
-#define ITM_TCR_ITMENA_Pos 0 /*!< ITM TCR: ITM Enable bit Position */
-#define ITM_TCR_ITMENA_Msk (1ul << ITM_TCR_ITMENA_Pos) /*!< ITM TCR: ITM Enable bit Mask */
-
-/* ITM Integration Write Register Definitions */
-#define ITM_IWR_ATVALIDM_Pos 0 /*!< ITM IWR: ATVALIDM Position */
-#define ITM_IWR_ATVALIDM_Msk (1ul << ITM_IWR_ATVALIDM_Pos) /*!< ITM IWR: ATVALIDM Mask */
-
-/* ITM Integration Read Register Definitions */
-#define ITM_IRR_ATREADYM_Pos 0 /*!< ITM IRR: ATREADYM Position */
-#define ITM_IRR_ATREADYM_Msk (1ul << ITM_IRR_ATREADYM_Pos) /*!< ITM IRR: ATREADYM Mask */
-
-/* ITM Integration Mode Control Register Definitions */
-#define ITM_IMCR_INTEGRATION_Pos 0 /*!< ITM IMCR: INTEGRATION Position */
-#define ITM_IMCR_INTEGRATION_Msk (1ul << ITM_IMCR_INTEGRATION_Pos) /*!< ITM IMCR: INTEGRATION Mask */
-
-/* ITM Lock Status Register Definitions */
-#define ITM_LSR_ByteAcc_Pos 2 /*!< ITM LSR: ByteAcc Position */
-#define ITM_LSR_ByteAcc_Msk (1ul << ITM_LSR_ByteAcc_Pos) /*!< ITM LSR: ByteAcc Mask */
-
-#define ITM_LSR_Access_Pos 1 /*!< ITM LSR: Access Position */
-#define ITM_LSR_Access_Msk (1ul << ITM_LSR_Access_Pos) /*!< ITM LSR: Access Mask */
-
-#define ITM_LSR_Present_Pos 0 /*!< ITM LSR: Present Position */
-#define ITM_LSR_Present_Msk (1ul << ITM_LSR_Present_Pos) /*!< ITM LSR: Present Mask */
-/*@}*/ /* end of group CMSIS_CM3_ITM */
-
-
-/** @addtogroup CMSIS_CM3_InterruptType CMSIS CM3 Interrupt Type
- memory mapped structure for Interrupt Type
- @{
- */
-typedef struct
-{
- uint32_t RESERVED0;
- __I uint32_t ICTR; /*!< Offset: 0x04 Interrupt Control Type Register */
-#if ((defined __CM3_REV) && (__CM3_REV >= 0x200))
- __IO uint32_t ACTLR; /*!< Offset: 0x08 Auxiliary Control Register */
-#else
- uint32_t RESERVED1;
-#endif
-} InterruptType_Type;
-
-/* Interrupt Controller Type Register Definitions */
-#define InterruptType_ICTR_INTLINESNUM_Pos 0 /*!< InterruptType ICTR: INTLINESNUM Position */
-#define InterruptType_ICTR_INTLINESNUM_Msk (0x1Ful << InterruptType_ICTR_INTLINESNUM_Pos) /*!< InterruptType ICTR: INTLINESNUM Mask */
-
-/* Auxiliary Control Register Definitions */
-#define InterruptType_ACTLR_DISFOLD_Pos 2 /*!< InterruptType ACTLR: DISFOLD Position */
-#define InterruptType_ACTLR_DISFOLD_Msk (1ul << InterruptType_ACTLR_DISFOLD_Pos) /*!< InterruptType ACTLR: DISFOLD Mask */
-
-#define InterruptType_ACTLR_DISDEFWBUF_Pos 1 /*!< InterruptType ACTLR: DISDEFWBUF Position */
-#define InterruptType_ACTLR_DISDEFWBUF_Msk (1ul << InterruptType_ACTLR_DISDEFWBUF_Pos) /*!< InterruptType ACTLR: DISDEFWBUF Mask */
-
-#define InterruptType_ACTLR_DISMCYCINT_Pos 0 /*!< InterruptType ACTLR: DISMCYCINT Position */
-#define InterruptType_ACTLR_DISMCYCINT_Msk (1ul << InterruptType_ACTLR_DISMCYCINT_Pos) /*!< InterruptType ACTLR: DISMCYCINT Mask */
-/*@}*/ /* end of group CMSIS_CM3_InterruptType */
-
-
-#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1)
-/** @addtogroup CMSIS_CM3_MPU CMSIS CM3 MPU
- memory mapped structure for Memory Protection Unit (MPU)
- @{
- */
-typedef struct
-{
- __I uint32_t TYPE; /*!< Offset: 0x00 MPU Type Register */
- __IO uint32_t CTRL; /*!< Offset: 0x04 MPU Control Register */
- __IO uint32_t RNR; /*!< Offset: 0x08 MPU Region RNRber Register */
- __IO uint32_t RBAR; /*!< Offset: 0x0C MPU Region Base Address Register */
- __IO uint32_t RASR; /*!< Offset: 0x10 MPU Region Attribute and Size Register */
- __IO uint32_t RBAR_A1; /*!< Offset: 0x14 MPU Alias 1 Region Base Address Register */
- __IO uint32_t RASR_A1; /*!< Offset: 0x18 MPU Alias 1 Region Attribute and Size Register */
- __IO uint32_t RBAR_A2; /*!< Offset: 0x1C MPU Alias 2 Region Base Address Register */
- __IO uint32_t RASR_A2; /*!< Offset: 0x20 MPU Alias 2 Region Attribute and Size Register */
- __IO uint32_t RBAR_A3; /*!< Offset: 0x24 MPU Alias 3 Region Base Address Register */
- __IO uint32_t RASR_A3; /*!< Offset: 0x28 MPU Alias 3 Region Attribute and Size Register */
-} MPU_Type;
-
-/* MPU Type Register */
-#define MPU_TYPE_IREGION_Pos 16 /*!< MPU TYPE: IREGION Position */
-#define MPU_TYPE_IREGION_Msk (0xFFul << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */
-
-#define MPU_TYPE_DREGION_Pos 8 /*!< MPU TYPE: DREGION Position */
-#define MPU_TYPE_DREGION_Msk (0xFFul << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */
-
-#define MPU_TYPE_SEPARATE_Pos 0 /*!< MPU TYPE: SEPARATE Position */
-#define MPU_TYPE_SEPARATE_Msk (1ul << MPU_TYPE_SEPARATE_Pos) /*!< MPU TYPE: SEPARATE Mask */
-
-/* MPU Control Register */
-#define MPU_CTRL_PRIVDEFENA_Pos 2 /*!< MPU CTRL: PRIVDEFENA Position */
-#define MPU_CTRL_PRIVDEFENA_Msk (1ul << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */
-
-#define MPU_CTRL_HFNMIENA_Pos 1 /*!< MPU CTRL: HFNMIENA Position */
-#define MPU_CTRL_HFNMIENA_Msk (1ul << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */
-
-#define MPU_CTRL_ENABLE_Pos 0 /*!< MPU CTRL: ENABLE Position */
-#define MPU_CTRL_ENABLE_Msk (1ul << MPU_CTRL_ENABLE_Pos) /*!< MPU CTRL: ENABLE Mask */
-
-/* MPU Region Number Register */
-#define MPU_RNR_REGION_Pos 0 /*!< MPU RNR: REGION Position */
-#define MPU_RNR_REGION_Msk (0xFFul << MPU_RNR_REGION_Pos) /*!< MPU RNR: REGION Mask */
-
-/* MPU Region Base Address Register */
-#define MPU_RBAR_ADDR_Pos 5 /*!< MPU RBAR: ADDR Position */
-#define MPU_RBAR_ADDR_Msk (0x7FFFFFFul << MPU_RBAR_ADDR_Pos) /*!< MPU RBAR: ADDR Mask */
-
-#define MPU_RBAR_VALID_Pos 4 /*!< MPU RBAR: VALID Position */
-#define MPU_RBAR_VALID_Msk (1ul << MPU_RBAR_VALID_Pos) /*!< MPU RBAR: VALID Mask */
-
-#define MPU_RBAR_REGION_Pos 0 /*!< MPU RBAR: REGION Position */
-#define MPU_RBAR_REGION_Msk (0xFul << MPU_RBAR_REGION_Pos) /*!< MPU RBAR: REGION Mask */
-
-/* MPU Region Attribute and Size Register */
-#define MPU_RASR_XN_Pos 28 /*!< MPU RASR: XN Position */
-#define MPU_RASR_XN_Msk (1ul << MPU_RASR_XN_Pos) /*!< MPU RASR: XN Mask */
-
-#define MPU_RASR_AP_Pos 24 /*!< MPU RASR: AP Position */
-#define MPU_RASR_AP_Msk (7ul << MPU_RASR_AP_Pos) /*!< MPU RASR: AP Mask */
-
-#define MPU_RASR_TEX_Pos 19 /*!< MPU RASR: TEX Position */
-#define MPU_RASR_TEX_Msk (7ul << MPU_RASR_TEX_Pos) /*!< MPU RASR: TEX Mask */
-
-#define MPU_RASR_S_Pos 18 /*!< MPU RASR: Shareable bit Position */
-#define MPU_RASR_S_Msk (1ul << MPU_RASR_S_Pos) /*!< MPU RASR: Shareable bit Mask */
-
-#define MPU_RASR_C_Pos 17 /*!< MPU RASR: Cacheable bit Position */
-#define MPU_RASR_C_Msk (1ul << MPU_RASR_C_Pos) /*!< MPU RASR: Cacheable bit Mask */
-
-#define MPU_RASR_B_Pos 16 /*!< MPU RASR: Bufferable bit Position */
-#define MPU_RASR_B_Msk (1ul << MPU_RASR_B_Pos) /*!< MPU RASR: Bufferable bit Mask */
-
-#define MPU_RASR_SRD_Pos 8 /*!< MPU RASR: Sub-Region Disable Position */
-#define MPU_RASR_SRD_Msk (0xFFul << MPU_RASR_SRD_Pos) /*!< MPU RASR: Sub-Region Disable Mask */
-
-#define MPU_RASR_SIZE_Pos 1 /*!< MPU RASR: Region Size Field Position */
-#define MPU_RASR_SIZE_Msk (0x1Ful << MPU_RASR_SIZE_Pos) /*!< MPU RASR: Region Size Field Mask */
-
-#define MPU_RASR_ENA_Pos 0 /*!< MPU RASR: Region enable bit Position */
-#define MPU_RASR_ENA_Msk (0x1Ful << MPU_RASR_ENA_Pos) /*!< MPU RASR: Region enable bit Disable Mask */
-
-/*@}*/ /* end of group CMSIS_CM3_MPU */
-#endif
-
-
-/** @addtogroup CMSIS_CM3_CoreDebug CMSIS CM3 Core Debug
- memory mapped structure for Core Debug Register
- @{
- */
-typedef struct
-{
- __IO uint32_t DHCSR; /*!< Offset: 0x00 Debug Halting Control and Status Register */
- __O uint32_t DCRSR; /*!< Offset: 0x04 Debug Core Register Selector Register */
- __IO uint32_t DCRDR; /*!< Offset: 0x08 Debug Core Register Data Register */
- __IO uint32_t DEMCR; /*!< Offset: 0x0C Debug Exception and Monitor Control Register */
-} CoreDebug_Type;
-
-/* Debug Halting Control and Status Register */
-#define CoreDebug_DHCSR_DBGKEY_Pos 16 /*!< CoreDebug DHCSR: DBGKEY Position */
-#define CoreDebug_DHCSR_DBGKEY_Msk (0xFFFFul << CoreDebug_DHCSR_DBGKEY_Pos) /*!< CoreDebug DHCSR: DBGKEY Mask */
-
-#define CoreDebug_DHCSR_S_RESET_ST_Pos 25 /*!< CoreDebug DHCSR: S_RESET_ST Position */
-#define CoreDebug_DHCSR_S_RESET_ST_Msk (1ul << CoreDebug_DHCSR_S_RESET_ST_Pos) /*!< CoreDebug DHCSR: S_RESET_ST Mask */
-
-#define CoreDebug_DHCSR_S_RETIRE_ST_Pos 24 /*!< CoreDebug DHCSR: S_RETIRE_ST Position */
-#define CoreDebug_DHCSR_S_RETIRE_ST_Msk (1ul << CoreDebug_DHCSR_S_RETIRE_ST_Pos) /*!< CoreDebug DHCSR: S_RETIRE_ST Mask */
-
-#define CoreDebug_DHCSR_S_LOCKUP_Pos 19 /*!< CoreDebug DHCSR: S_LOCKUP Position */
-#define CoreDebug_DHCSR_S_LOCKUP_Msk (1ul << CoreDebug_DHCSR_S_LOCKUP_Pos) /*!< CoreDebug DHCSR: S_LOCKUP Mask */
-
-#define CoreDebug_DHCSR_S_SLEEP_Pos 18 /*!< CoreDebug DHCSR: S_SLEEP Position */
-#define CoreDebug_DHCSR_S_SLEEP_Msk (1ul << CoreDebug_DHCSR_S_SLEEP_Pos) /*!< CoreDebug DHCSR: S_SLEEP Mask */
-
-#define CoreDebug_DHCSR_S_HALT_Pos 17 /*!< CoreDebug DHCSR: S_HALT Position */
-#define CoreDebug_DHCSR_S_HALT_Msk (1ul << CoreDebug_DHCSR_S_HALT_Pos) /*!< CoreDebug DHCSR: S_HALT Mask */
-
-#define CoreDebug_DHCSR_S_REGRDY_Pos 16 /*!< CoreDebug DHCSR: S_REGRDY Position */
-#define CoreDebug_DHCSR_S_REGRDY_Msk (1ul << CoreDebug_DHCSR_S_REGRDY_Pos) /*!< CoreDebug DHCSR: S_REGRDY Mask */
-
-#define CoreDebug_DHCSR_C_SNAPSTALL_Pos 5 /*!< CoreDebug DHCSR: C_SNAPSTALL Position */
-#define CoreDebug_DHCSR_C_SNAPSTALL_Msk (1ul << CoreDebug_DHCSR_C_SNAPSTALL_Pos) /*!< CoreDebug DHCSR: C_SNAPSTALL Mask */
-
-#define CoreDebug_DHCSR_C_MASKINTS_Pos 3 /*!< CoreDebug DHCSR: C_MASKINTS Position */
-#define CoreDebug_DHCSR_C_MASKINTS_Msk (1ul << CoreDebug_DHCSR_C_MASKINTS_Pos) /*!< CoreDebug DHCSR: C_MASKINTS Mask */
-
-#define CoreDebug_DHCSR_C_STEP_Pos 2 /*!< CoreDebug DHCSR: C_STEP Position */
-#define CoreDebug_DHCSR_C_STEP_Msk (1ul << CoreDebug_DHCSR_C_STEP_Pos) /*!< CoreDebug DHCSR: C_STEP Mask */
-
-#define CoreDebug_DHCSR_C_HALT_Pos 1 /*!< CoreDebug DHCSR: C_HALT Position */
-#define CoreDebug_DHCSR_C_HALT_Msk (1ul << CoreDebug_DHCSR_C_HALT_Pos) /*!< CoreDebug DHCSR: C_HALT Mask */
-
-#define CoreDebug_DHCSR_C_DEBUGEN_Pos 0 /*!< CoreDebug DHCSR: C_DEBUGEN Position */
-#define CoreDebug_DHCSR_C_DEBUGEN_Msk (1ul << CoreDebug_DHCSR_C_DEBUGEN_Pos) /*!< CoreDebug DHCSR: C_DEBUGEN Mask */
-
-/* Debug Core Register Selector Register */
-#define CoreDebug_DCRSR_REGWnR_Pos 16 /*!< CoreDebug DCRSR: REGWnR Position */
-#define CoreDebug_DCRSR_REGWnR_Msk (1ul << CoreDebug_DCRSR_REGWnR_Pos) /*!< CoreDebug DCRSR: REGWnR Mask */
-
-#define CoreDebug_DCRSR_REGSEL_Pos 0 /*!< CoreDebug DCRSR: REGSEL Position */
-#define CoreDebug_DCRSR_REGSEL_Msk (0x1Ful << CoreDebug_DCRSR_REGSEL_Pos) /*!< CoreDebug DCRSR: REGSEL Mask */
-
-/* Debug Exception and Monitor Control Register */
-#define CoreDebug_DEMCR_TRCENA_Pos 24 /*!< CoreDebug DEMCR: TRCENA Position */
-#define CoreDebug_DEMCR_TRCENA_Msk (1ul << CoreDebug_DEMCR_TRCENA_Pos) /*!< CoreDebug DEMCR: TRCENA Mask */
-
-#define CoreDebug_DEMCR_MON_REQ_Pos 19 /*!< CoreDebug DEMCR: MON_REQ Position */
-#define CoreDebug_DEMCR_MON_REQ_Msk (1ul << CoreDebug_DEMCR_MON_REQ_Pos) /*!< CoreDebug DEMCR: MON_REQ Mask */
-
-#define CoreDebug_DEMCR_MON_STEP_Pos 18 /*!< CoreDebug DEMCR: MON_STEP Position */
-#define CoreDebug_DEMCR_MON_STEP_Msk (1ul << CoreDebug_DEMCR_MON_STEP_Pos) /*!< CoreDebug DEMCR: MON_STEP Mask */
-
-#define CoreDebug_DEMCR_MON_PEND_Pos 17 /*!< CoreDebug DEMCR: MON_PEND Position */
-#define CoreDebug_DEMCR_MON_PEND_Msk (1ul << CoreDebug_DEMCR_MON_PEND_Pos) /*!< CoreDebug DEMCR: MON_PEND Mask */
-
-#define CoreDebug_DEMCR_MON_EN_Pos 16 /*!< CoreDebug DEMCR: MON_EN Position */
-#define CoreDebug_DEMCR_MON_EN_Msk (1ul << CoreDebug_DEMCR_MON_EN_Pos) /*!< CoreDebug DEMCR: MON_EN Mask */
-
-#define CoreDebug_DEMCR_VC_HARDERR_Pos 10 /*!< CoreDebug DEMCR: VC_HARDERR Position */
-#define CoreDebug_DEMCR_VC_HARDERR_Msk (1ul << CoreDebug_DEMCR_VC_HARDERR_Pos) /*!< CoreDebug DEMCR: VC_HARDERR Mask */
-
-#define CoreDebug_DEMCR_VC_INTERR_Pos 9 /*!< CoreDebug DEMCR: VC_INTERR Position */
-#define CoreDebug_DEMCR_VC_INTERR_Msk (1ul << CoreDebug_DEMCR_VC_INTERR_Pos) /*!< CoreDebug DEMCR: VC_INTERR Mask */
-
-#define CoreDebug_DEMCR_VC_BUSERR_Pos 8 /*!< CoreDebug DEMCR: VC_BUSERR Position */
-#define CoreDebug_DEMCR_VC_BUSERR_Msk (1ul << CoreDebug_DEMCR_VC_BUSERR_Pos) /*!< CoreDebug DEMCR: VC_BUSERR Mask */
-
-#define CoreDebug_DEMCR_VC_STATERR_Pos 7 /*!< CoreDebug DEMCR: VC_STATERR Position */
-#define CoreDebug_DEMCR_VC_STATERR_Msk (1ul << CoreDebug_DEMCR_VC_STATERR_Pos) /*!< CoreDebug DEMCR: VC_STATERR Mask */
-
-#define CoreDebug_DEMCR_VC_CHKERR_Pos 6 /*!< CoreDebug DEMCR: VC_CHKERR Position */
-#define CoreDebug_DEMCR_VC_CHKERR_Msk (1ul << CoreDebug_DEMCR_VC_CHKERR_Pos) /*!< CoreDebug DEMCR: VC_CHKERR Mask */
-
-#define CoreDebug_DEMCR_VC_NOCPERR_Pos 5 /*!< CoreDebug DEMCR: VC_NOCPERR Position */
-#define CoreDebug_DEMCR_VC_NOCPERR_Msk (1ul << CoreDebug_DEMCR_VC_NOCPERR_Pos) /*!< CoreDebug DEMCR: VC_NOCPERR Mask */
-
-#define CoreDebug_DEMCR_VC_MMERR_Pos 4 /*!< CoreDebug DEMCR: VC_MMERR Position */
-#define CoreDebug_DEMCR_VC_MMERR_Msk (1ul << CoreDebug_DEMCR_VC_MMERR_Pos) /*!< CoreDebug DEMCR: VC_MMERR Mask */
-
-#define CoreDebug_DEMCR_VC_CORERESET_Pos 0 /*!< CoreDebug DEMCR: VC_CORERESET Position */
-#define CoreDebug_DEMCR_VC_CORERESET_Msk (1ul << CoreDebug_DEMCR_VC_CORERESET_Pos) /*!< CoreDebug DEMCR: VC_CORERESET Mask */
-/*@}*/ /* end of group CMSIS_CM3_CoreDebug */
-
-
-/* Memory mapping of Cortex-M3 Hardware */
-#define SCS_BASE (0xE000E000) /*!< System Control Space Base Address */
-#define ITM_BASE (0xE0000000) /*!< ITM Base Address */
-#define CoreDebug_BASE (0xE000EDF0) /*!< Core Debug Base Address */
-#define SysTick_BASE (SCS_BASE + 0x0010) /*!< SysTick Base Address */
-#define NVIC_BASE (SCS_BASE + 0x0100) /*!< NVIC Base Address */
-#define SCB_BASE (SCS_BASE + 0x0D00) /*!< System Control Block Base Address */
-
-#define InterruptType ((InterruptType_Type *) SCS_BASE) /*!< Interrupt Type Register */
-#define SCB ((SCB_Type *) SCB_BASE) /*!< SCB configuration struct */
-#define SysTick ((SysTick_Type *) SysTick_BASE) /*!< SysTick configuration struct */
-#define NVIC ((NVIC_Type *) NVIC_BASE) /*!< NVIC configuration struct */
-#define ITM ((ITM_Type *) ITM_BASE) /*!< ITM configuration struct */
-#define CoreDebug ((CoreDebug_Type *) CoreDebug_BASE) /*!< Core Debug configuration struct */
-
-#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1)
- #define MPU_BASE (SCS_BASE + 0x0D90) /*!< Memory Protection Unit */
- #define MPU ((MPU_Type*) MPU_BASE) /*!< Memory Protection Unit */
-#endif
-
-/*@}*/ /* end of group CMSIS_CM3_core_register */
-
-
-/*******************************************************************************
- * Hardware Abstraction Layer
- ******************************************************************************/
-
-#if defined ( __CC_ARM )
- #define __ASM __asm /*!< asm keyword for ARM Compiler */
- #define __INLINE __inline /*!< inline keyword for ARM Compiler */
-
-#elif defined ( __ICCARM__ )
- #define __ASM __asm /*!< asm keyword for IAR Compiler */
- #define __INLINE inline /*!< inline keyword for IAR Compiler. Only avaiable in High optimization mode! */
-
-#elif defined ( __GNUC__ )
- #define __ASM __asm /*!< asm keyword for GNU Compiler */
- #define __INLINE inline /*!< inline keyword for GNU Compiler */
-
-#elif defined ( __TASKING__ )
- #define __ASM __asm /*!< asm keyword for TASKING Compiler */
- #define __INLINE inline /*!< inline keyword for TASKING Compiler */
-
-#endif
-
-
-/* ################### Compiler specific Intrinsics ########################### */
-
-#if defined ( __CC_ARM ) /*------------------RealView Compiler -----------------*/
-/* ARM armcc specific functions */
-
-#define __enable_fault_irq __enable_fiq
-#define __disable_fault_irq __disable_fiq
-
-#define __NOP __nop
-#define __WFI __wfi
-#define __WFE __wfe
-#define __SEV __sev
-#define __ISB() __isb(0)
-#define __DSB() __dsb(0)
-#define __DMB() __dmb(0)
-#define __REV __rev
-#define __RBIT __rbit
-#define __LDREXB(ptr) ((unsigned char ) __ldrex(ptr))
-#define __LDREXH(ptr) ((unsigned short) __ldrex(ptr))
-#define __LDREXW(ptr) ((unsigned int ) __ldrex(ptr))
-#define __STREXB(value, ptr) __strex(value, ptr)
-#define __STREXH(value, ptr) __strex(value, ptr)
-#define __STREXW(value, ptr) __strex(value, ptr)
-
-
-/* intrinsic unsigned long long __ldrexd(volatile void *ptr) */
-/* intrinsic int __strexd(unsigned long long val, volatile void *ptr) */
-/* intrinsic void __enable_irq(); */
-/* intrinsic void __disable_irq(); */
-
-
-/**
- * @brief Return the Process Stack Pointer
- *
- * @return ProcessStackPointer
- *
- * Return the actual process stack pointer
- */
-extern uint32_t __get_PSP(void);
-
-/**
- * @brief Set the Process Stack Pointer
- *
- * @param topOfProcStack Process Stack Pointer
- *
- * Assign the value ProcessStackPointer to the MSP
- * (process stack pointer) Cortex processor register
- */
-extern void __set_PSP(uint32_t topOfProcStack);
-
-/**
- * @brief Return the Main Stack Pointer
- *
- * @return Main Stack Pointer
- *
- * Return the current value of the MSP (main stack pointer)
- * Cortex processor register
- */
-extern uint32_t __get_MSP(void);
-
-/**
- * @brief Set the Main Stack Pointer
- *
- * @param topOfMainStack Main Stack Pointer
- *
- * Assign the value mainStackPointer to the MSP
- * (main stack pointer) Cortex processor register
- */
-extern void __set_MSP(uint32_t topOfMainStack);
-
-/**
- * @brief Reverse byte order in unsigned short value
- *
- * @param value value to reverse
- * @return reversed value
- *
- * Reverse byte order in unsigned short value
- */
-extern uint32_t __REV16(uint16_t value);
-
-/**
- * @brief Reverse byte order in signed short value with sign extension to integer
- *
- * @param value value to reverse
- * @return reversed value
- *
- * Reverse byte order in signed short value with sign extension to integer
- */
-extern int32_t __REVSH(int16_t value);
-
-
-#if (__ARMCC_VERSION < 400000)
-
-/**
- * @brief Remove the exclusive lock created by ldrex
- *
- * Removes the exclusive lock which is created by ldrex.
- */
-extern void __CLREX(void);
-
-/**
- * @brief Return the Base Priority value
- *
- * @return BasePriority
- *
- * Return the content of the base priority register
- */
-extern uint32_t __get_BASEPRI(void);
-
-/**
- * @brief Set the Base Priority value
- *
- * @param basePri BasePriority
- *
- * Set the base priority register
- */
-extern void __set_BASEPRI(uint32_t basePri);
-
-/**
- * @brief Return the Priority Mask value
- *
- * @return PriMask
- *
- * Return state of the priority mask bit from the priority mask register
- */
-extern uint32_t __get_PRIMASK(void);
-
-/**
- * @brief Set the Priority Mask value
- *
- * @param priMask PriMask
- *
- * Set the priority mask bit in the priority mask register
- */
-extern void __set_PRIMASK(uint32_t priMask);
-
-/**
- * @brief Return the Fault Mask value
- *
- * @return FaultMask
- *
- * Return the content of the fault mask register
- */
-extern uint32_t __get_FAULTMASK(void);
-
-/**
- * @brief Set the Fault Mask value
- *
- * @param faultMask faultMask value
- *
- * Set the fault mask register
- */
-extern void __set_FAULTMASK(uint32_t faultMask);
-
-/**
- * @brief Return the Control Register value
- *
- * @return Control value
- *
- * Return the content of the control register
- */
-extern uint32_t __get_CONTROL(void);
-
-/**
- * @brief Set the Control Register value
- *
- * @param control Control value
- *
- * Set the control register
- */
-extern void __set_CONTROL(uint32_t control);
-
-#else /* (__ARMCC_VERSION >= 400000) */
-
-/**
- * @brief Remove the exclusive lock created by ldrex
- *
- * Removes the exclusive lock which is created by ldrex.
- */
-#define __CLREX __clrex
-
-/**
- * @brief Return the Base Priority value
- *
- * @return BasePriority
- *
- * Return the content of the base priority register
- */
-static __INLINE uint32_t __get_BASEPRI(void)
-{
- register uint32_t __regBasePri __ASM("basepri");
- return(__regBasePri);
-}
-
-/**
- * @brief Set the Base Priority value
- *
- * @param basePri BasePriority
- *
- * Set the base priority register
- */
-static __INLINE void __set_BASEPRI(uint32_t basePri)
-{
- register uint32_t __regBasePri __ASM("basepri");
- __regBasePri = (basePri & 0xff);
-}
-
-/**
- * @brief Return the Priority Mask value
- *
- * @return PriMask
- *
- * Return state of the priority mask bit from the priority mask register
- */
-static __INLINE uint32_t __get_PRIMASK(void)
-{
- register uint32_t __regPriMask __ASM("primask");
- return(__regPriMask);
-}
-
-/**
- * @brief Set the Priority Mask value
- *
- * @param priMask PriMask
- *
- * Set the priority mask bit in the priority mask register
- */
-static __INLINE void __set_PRIMASK(uint32_t priMask)
-{
- register uint32_t __regPriMask __ASM("primask");
- __regPriMask = (priMask);
-}
-
-/**
- * @brief Return the Fault Mask value
- *
- * @return FaultMask
- *
- * Return the content of the fault mask register
- */
-static __INLINE uint32_t __get_FAULTMASK(void)
-{
- register uint32_t __regFaultMask __ASM("faultmask");
- return(__regFaultMask);
-}
-
-/**
- * @brief Set the Fault Mask value
- *
- * @param faultMask faultMask value
- *
- * Set the fault mask register
- */
-static __INLINE void __set_FAULTMASK(uint32_t faultMask)
-{
- register uint32_t __regFaultMask __ASM("faultmask");
- __regFaultMask = (faultMask & 1);
-}
-
-/**
- * @brief Return the Control Register value
- *
- * @return Control value
- *
- * Return the content of the control register
- */
-static __INLINE uint32_t __get_CONTROL(void)
-{
- register uint32_t __regControl __ASM("control");
- return(__regControl);
-}
-
-/**
- * @brief Set the Control Register value
- *
- * @param control Control value
- *
- * Set the control register
- */
-static __INLINE void __set_CONTROL(uint32_t control)
-{
- register uint32_t __regControl __ASM("control");
- __regControl = control;
-}
-
-#endif /* __ARMCC_VERSION */
-
-
-
-#elif (defined (__ICCARM__)) /*------------------ ICC Compiler -------------------*/
-/* IAR iccarm specific functions */
-
-#define __enable_irq __enable_interrupt /*!< global Interrupt enable */
-#define __disable_irq __disable_interrupt /*!< global Interrupt disable */
-
-static __INLINE void __enable_fault_irq() { __ASM ("cpsie f"); }
-static __INLINE void __disable_fault_irq() { __ASM ("cpsid f"); }
-
-#define __NOP __no_operation /*!< no operation intrinsic in IAR Compiler */
-static __INLINE void __WFI() { __ASM ("wfi"); }
-static __INLINE void __WFE() { __ASM ("wfe"); }
-static __INLINE void __SEV() { __ASM ("sev"); }
-static __INLINE void __CLREX() { __ASM ("clrex"); }
-
-/* intrinsic void __ISB(void) */
-/* intrinsic void __DSB(void) */
-/* intrinsic void __DMB(void) */
-/* intrinsic void __set_PRIMASK(); */
-/* intrinsic void __get_PRIMASK(); */
-/* intrinsic void __set_FAULTMASK(); */
-/* intrinsic void __get_FAULTMASK(); */
-/* intrinsic uint32_t __REV(uint32_t value); */
-/* intrinsic uint32_t __REVSH(uint32_t value); */
-/* intrinsic unsigned long __STREX(unsigned long, unsigned long); */
-/* intrinsic unsigned long __LDREX(unsigned long *); */
-
-
-/**
- * @brief Return the Process Stack Pointer
- *
- * @return ProcessStackPointer
- *
- * Return the actual process stack pointer
- */
-//extern uint32_t __get_PSP(void);
-
-/**
- * @brief Set the Process Stack Pointer
- *
- * @param topOfProcStack Process Stack Pointer
- *
- * Assign the value ProcessStackPointer to the MSP
- * (process stack pointer) Cortex processor register
- */
-//extern void __set_PSP(uint32_t topOfProcStack);
-
-/**
- * @brief Return the Main Stack Pointer
- *
- * @return Main Stack Pointer
- *
- * Return the current value of the MSP (main stack pointer)
- * Cortex processor register
- */
-//extern uint32_t __get_MSP(void);
-
-/**
- * @brief Set the Main Stack Pointer
- *
- * @param topOfMainStack Main Stack Pointer
- *
- * Assign the value mainStackPointer to the MSP
- * (main stack pointer) Cortex processor register
- */
-//extern void __set_MSP(uint32_t topOfMainStack);
-
-/**
- * @brief Reverse byte order in unsigned short value
- *
- * @param value value to reverse
- * @return reversed value
- *
- * Reverse byte order in unsigned short value
- */
-//extern uint32_t __REV16(uint16_t value);
-
-/**
- * @brief Reverse bit order of value
- *
- * @param value value to reverse
- * @return reversed value
- *
- * Reverse bit order of value
- */
-//extern uint32_t __RBIT(uint32_t value);
-
-/**
- * @brief LDR Exclusive (8 bit)
- *
- * @param *addr address pointer
- * @return value of (*address)
- *
- * Exclusive LDR command for 8 bit values)
- */
-extern uint8_t __LDREXB(uint8_t *addr);
-
-/**
- * @brief LDR Exclusive (16 bit)
- *
- * @param *addr address pointer
- * @return value of (*address)
- *
- * Exclusive LDR command for 16 bit values
- */
-extern uint16_t __LDREXH(uint16_t *addr);
-
-/**
- * @brief LDR Exclusive (32 bit)
- *
- * @param *addr address pointer
- * @return value of (*address)
- *
- * Exclusive LDR command for 32 bit values
- */
-extern uint32_t __LDREXW(uint32_t *addr);
-
-/**
- * @brief STR Exclusive (8 bit)
- *
- * @param value value to store
- * @param *addr address pointer
- * @return successful / failed
- *
- * Exclusive STR command for 8 bit values
- */
-//extern uint32_t __STREXB(uint8_t value, uint8_t *addr);
-
-/**
- * @brief STR Exclusive (16 bit)
- *
- * @param value value to store
- * @param *addr address pointer
- * @return successful / failed
- *
- * Exclusive STR command for 16 bit values
- */
-//extern uint32_t __STREXH(uint16_t value, uint16_t *addr);
-
-/**
- * @brief STR Exclusive (32 bit)
- *
- * @param value value to store
- * @param *addr address pointer
- * @return successful / failed
- *
- * Exclusive STR command for 32 bit values
- */
-extern uint32_t __STREXW(uint32_t value, uint32_t *addr);
-
-
-
-#elif (defined (__GNUC__)) /*------------------ GNU Compiler ---------------------*/
-/* GNU gcc specific functions */
-
-static __INLINE void __enable_irq(void) { __ASM volatile ("cpsie i"); }
-static __INLINE void __disable_irq(void) { __ASM volatile ("cpsid i"); }
-
-static __INLINE void __enable_fault_irq(void) { __ASM volatile ("cpsie f"); }
-static __INLINE void __disable_fault_irq(void) { __ASM volatile ("cpsid f"); }
-
-static __INLINE void __NOP(void) { __ASM volatile ("nop"); }
-static __INLINE void __WFI(void) { __ASM volatile ("wfi"); }
-static __INLINE void __WFE(void) { __ASM volatile ("wfe"); }
-static __INLINE void __SEV(void) { __ASM volatile ("sev"); }
-static __INLINE void __ISB(void) { __ASM volatile ("isb"); }
-static __INLINE void __DSB(void) { __ASM volatile ("dsb"); }
-static __INLINE void __DMB(void) { __ASM volatile ("dmb"); }
-static __INLINE void __CLREX(void) { __ASM volatile ("clrex"); }
-
-
-/**
- * @brief Return the Process Stack Pointer
- *
- * @return ProcessStackPointer
- *
- * Return the actual process stack pointer
- */
-extern uint32_t __get_PSP(void);
-
-/**
- * @brief Set the Process Stack Pointer
- *
- * @param topOfProcStack Process Stack Pointer
- *
- * Assign the value ProcessStackPointer to the MSP
- * (process stack pointer) Cortex processor register
- */
-extern void __set_PSP(uint32_t topOfProcStack);
-
-/**
- * @brief Return the Main Stack Pointer
- *
- * @return Main Stack Pointer
- *
- * Return the current value of the MSP (main stack pointer)
- * Cortex processor register
- */
-extern uint32_t __get_MSP(void);
-
-/**
- * @brief Set the Main Stack Pointer
- *
- * @param topOfMainStack Main Stack Pointer
- *
- * Assign the value mainStackPointer to the MSP
- * (main stack pointer) Cortex processor register
- */
-extern void __set_MSP(uint32_t topOfMainStack);
-
-/**
- * @brief Return the Base Priority value
- *
- * @return BasePriority
- *
- * Return the content of the base priority register
- */
-extern uint32_t __get_BASEPRI(void);
-
-/**
- * @brief Set the Base Priority value
- *
- * @param basePri BasePriority
- *
- * Set the base priority register
- */
-extern void __set_BASEPRI(uint32_t basePri);
-
-/**
- * @brief Return the Priority Mask value
- *
- * @return PriMask
- *
- * Return state of the priority mask bit from the priority mask register
- */
-extern uint32_t __get_PRIMASK(void);
-
-/**
- * @brief Set the Priority Mask value
- *
- * @param priMask PriMask
- *
- * Set the priority mask bit in the priority mask register
- */
-extern void __set_PRIMASK(uint32_t priMask);
-
-/**
- * @brief Return the Fault Mask value
- *
- * @return FaultMask
- *
- * Return the content of the fault mask register
- */
-extern uint32_t __get_FAULTMASK(void);
-
-/**
- * @brief Set the Fault Mask value
- *
- * @param faultMask faultMask value
- *
- * Set the fault mask register
- */
-extern void __set_FAULTMASK(uint32_t faultMask);
-
-/**
- * @brief Return the Control Register value
-*
-* @return Control value
- *
- * Return the content of the control register
- */
-extern uint32_t __get_CONTROL(void);
-
-/**
- * @brief Set the Control Register value
- *
- * @param control Control value
- *
- * Set the control register
- */
-extern void __set_CONTROL(uint32_t control);
-
-/**
- * @brief Reverse byte order in integer value
- *
- * @param value value to reverse
- * @return reversed value
- *
- * Reverse byte order in integer value
- */
-extern uint32_t __REV(uint32_t value);
-
-/**
- * @brief Reverse byte order in unsigned short value
- *
- * @param value value to reverse
- * @return reversed value
- *
- * Reverse byte order in unsigned short value
- */
-extern uint32_t __REV16(uint16_t value);
-
-/**
- * @brief Reverse byte order in signed short value with sign extension to integer
- *
- * @param value value to reverse
- * @return reversed value
- *
- * Reverse byte order in signed short value with sign extension to integer
- */
-extern int32_t __REVSH(int16_t value);
-
-/**
- * @brief Reverse bit order of value
- *
- * @param value value to reverse
- * @return reversed value
- *
- * Reverse bit order of value
- */
-extern uint32_t __RBIT(uint32_t value);
-
-/**
- * @brief LDR Exclusive (8 bit)
- *
- * @param *addr address pointer
- * @return value of (*address)
- *
- * Exclusive LDR command for 8 bit value
- */
-extern uint8_t __LDREXB(uint8_t *addr);
-
-/**
- * @brief LDR Exclusive (16 bit)
- *
- * @param *addr address pointer
- * @return value of (*address)
- *
- * Exclusive LDR command for 16 bit values
- */
-extern uint16_t __LDREXH(uint16_t *addr);
-
-/**
- * @brief LDR Exclusive (32 bit)
- *
- * @param *addr address pointer
- * @return value of (*address)
- *
- * Exclusive LDR command for 32 bit values
- */
-extern uint32_t __LDREXW(uint32_t *addr);
-
-/**
- * @brief STR Exclusive (8 bit)
- *
- * @param value value to store
- * @param *addr address pointer
- * @return successful / failed
- *
- * Exclusive STR command for 8 bit values
- */
-extern uint32_t __STREXB(uint8_t value, uint8_t *addr);
-
-/**
- * @brief STR Exclusive (16 bit)
- *
- * @param value value to store
- * @param *addr address pointer
- * @return successful / failed
- *
- * Exclusive STR command for 16 bit values
- */
-extern uint32_t __STREXH(uint16_t value, uint16_t *addr);
-
-/**
- * @brief STR Exclusive (32 bit)
- *
- * @param value value to store
- * @param *addr address pointer
- * @return successful / failed
- *
- * Exclusive STR command for 32 bit values
- */
-extern uint32_t __STREXW(uint32_t value, uint32_t *addr);
-
-
-#elif (defined (__TASKING__)) /*------------------ TASKING Compiler ---------------------*/
-/* TASKING carm specific functions */
-
-/*
- * The CMSIS functions have been implemented as intrinsics in the compiler.
- * Please use "carm -?i" to get an up to date list of all instrinsics,
- * Including the CMSIS ones.
- */
-
-#endif
-
-
-/** @addtogroup CMSIS_CM3_Core_FunctionInterface CMSIS CM3 Core Function Interface
- Core Function Interface containing:
- - Core NVIC Functions
- - Core SysTick Functions
- - Core Reset Functions
-*/
-/*@{*/
-
-/* ########################## NVIC functions #################################### */
-
-/**
- * @brief Set the Priority Grouping in NVIC Interrupt Controller
- *
- * @param PriorityGroup is priority grouping field
- *
- * Set the priority grouping field using the required unlock sequence.
- * The parameter priority_grouping is assigned to the field
- * SCB->AIRCR [10:8] PRIGROUP field. Only values from 0..7 are used.
- * In case of a conflict between priority grouping and available
- * priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set.
- */
-static __INLINE void NVIC_SetPriorityGrouping(uint32_t PriorityGroup)
-{
- uint32_t reg_value;
- uint32_t PriorityGroupTmp = (PriorityGroup & 0x07); /* only values 0..7 are used */
-
- reg_value = SCB->AIRCR; /* read old register configuration */
- reg_value &= ~(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk); /* clear bits to change */
- reg_value = (reg_value |
- (0x5FA << SCB_AIRCR_VECTKEY_Pos) |
- (PriorityGroupTmp << 8)); /* Insert write key and priorty group */
- SCB->AIRCR = reg_value;
-}
-
-/**
- * @brief Get the Priority Grouping from NVIC Interrupt Controller
- *
- * @return priority grouping field
- *
- * Get the priority grouping from NVIC Interrupt Controller.
- * priority grouping is SCB->AIRCR [10:8] PRIGROUP field.
- */
-static __INLINE uint32_t NVIC_GetPriorityGrouping(void)
-{
- return ((SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos); /* read priority grouping field */
-}
-
-/**
- * @brief Enable Interrupt in NVIC Interrupt Controller
- *
- * @param IRQn The positive number of the external interrupt to enable
- *
- * Enable a device specific interupt in the NVIC interrupt controller.
- * The interrupt number cannot be a negative value.
- */
-static __INLINE void NVIC_EnableIRQ(IRQn_Type IRQn)
-{
- NVIC->ISER[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* enable interrupt */
-}
-
-/**
- * @brief Disable the interrupt line for external interrupt specified
- *
- * @param IRQn The positive number of the external interrupt to disable
- *
- * Disable a device specific interupt in the NVIC interrupt controller.
- * The interrupt number cannot be a negative value.
- */
-static __INLINE void NVIC_DisableIRQ(IRQn_Type IRQn)
-{
- NVIC->ICER[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* disable interrupt */
-}
-
-/**
- * @brief Read the interrupt pending bit for a device specific interrupt source
- *
- * @param IRQn The number of the device specifc interrupt
- * @return 1 = interrupt pending, 0 = interrupt not pending
- *
- * Read the pending register in NVIC and return 1 if its status is pending,
- * otherwise it returns 0
- */
-static __INLINE uint32_t NVIC_GetPendingIRQ(IRQn_Type IRQn)
-{
- return((uint32_t) ((NVIC->ISPR[(uint32_t)(IRQn) >> 5] & (1 << ((uint32_t)(IRQn) & 0x1F)))?1:0)); /* Return 1 if pending else 0 */
-}
-
-/**
- * @brief Set the pending bit for an external interrupt
- *
- * @param IRQn The number of the interrupt for set pending
- *
- * Set the pending bit for the specified interrupt.
- * The interrupt number cannot be a negative value.
- */
-static __INLINE void NVIC_SetPendingIRQ(IRQn_Type IRQn)
-{
- NVIC->ISPR[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* set interrupt pending */
-}
-
-/**
- * @brief Clear the pending bit for an external interrupt
- *
- * @param IRQn The number of the interrupt for clear pending
- *
- * Clear the pending bit for the specified interrupt.
- * The interrupt number cannot be a negative value.
- */
-static __INLINE void NVIC_ClearPendingIRQ(IRQn_Type IRQn)
-{
- NVIC->ICPR[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* Clear pending interrupt */
-}
-
-/**
- * @brief Read the active bit for an external interrupt
- *
- * @param IRQn The number of the interrupt for read active bit
- * @return 1 = interrupt active, 0 = interrupt not active
- *
- * Read the active register in NVIC and returns 1 if its status is active,
- * otherwise it returns 0.
- */
-static __INLINE uint32_t NVIC_GetActive(IRQn_Type IRQn)
-{
- return((uint32_t)((NVIC->IABR[(uint32_t)(IRQn) >> 5] & (1 << ((uint32_t)(IRQn) & 0x1F)))?1:0)); /* Return 1 if active else 0 */
-}
-
-/**
- * @brief Set the priority for an interrupt
- *
- * @param IRQn The number of the interrupt for set priority
- * @param priority The priority to set
- *
- * Set the priority for the specified interrupt. The interrupt
- * number can be positive to specify an external (device specific)
- * interrupt, or negative to specify an internal (core) interrupt.
- *
- * Note: The priority cannot be set for every core interrupt.
- */
-static __INLINE void NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority)
-{
- if(IRQn < 0) {
- SCB->SHP[((uint32_t)(IRQn) & 0xF)-4] = ((priority << (8 - __NVIC_PRIO_BITS)) & 0xff); } /* set Priority for Cortex-M3 System Interrupts */
- else {
- NVIC->IP[(uint32_t)(IRQn)] = ((priority << (8 - __NVIC_PRIO_BITS)) & 0xff); } /* set Priority for device specific Interrupts */
-}
-
-/**
- * @brief Read the priority for an interrupt
- *
- * @param IRQn The number of the interrupt for get priority
- * @return The priority for the interrupt
- *
- * Read the priority for the specified interrupt. The interrupt
- * number can be positive to specify an external (device specific)
- * interrupt, or negative to specify an internal (core) interrupt.
- *
- * The returned priority value is automatically aligned to the implemented
- * priority bits of the microcontroller.
- *
- * Note: The priority cannot be set for every core interrupt.
- */
-static __INLINE uint32_t NVIC_GetPriority(IRQn_Type IRQn)
-{
-
- if(IRQn < 0) {
- return((uint32_t)(SCB->SHP[((uint32_t)(IRQn) & 0xF)-4] >> (8 - __NVIC_PRIO_BITS))); } /* get priority for Cortex-M3 system interrupts */
- else {
- return((uint32_t)(NVIC->IP[(uint32_t)(IRQn)] >> (8 - __NVIC_PRIO_BITS))); } /* get priority for device specific interrupts */
-}
-
-
-/**
- * @brief Encode the priority for an interrupt
- *
- * @param PriorityGroup The used priority group
- * @param PreemptPriority The preemptive priority value (starting from 0)
- * @param SubPriority The sub priority value (starting from 0)
- * @return The encoded priority for the interrupt
- *
- * Encode the priority for an interrupt with the given priority group,
- * preemptive priority value and sub priority value.
- * In case of a conflict between priority grouping and available
- * priority bits (__NVIC_PRIO_BITS) the samllest possible priority group is set.
- *
- * The returned priority value can be used for NVIC_SetPriority(...) function
- */
-static __INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority)
-{
- uint32_t PriorityGroupTmp = (PriorityGroup & 0x07); /* only values 0..7 are used */
- uint32_t PreemptPriorityBits;
- uint32_t SubPriorityBits;
-
- PreemptPriorityBits = ((7 - PriorityGroupTmp) > __NVIC_PRIO_BITS) ? __NVIC_PRIO_BITS : 7 - PriorityGroupTmp;
- SubPriorityBits = ((PriorityGroupTmp + __NVIC_PRIO_BITS) < 7) ? 0 : PriorityGroupTmp - 7 + __NVIC_PRIO_BITS;
-
- return (
- ((PreemptPriority & ((1 << (PreemptPriorityBits)) - 1)) << SubPriorityBits) |
- ((SubPriority & ((1 << (SubPriorityBits )) - 1)))
- );
-}
-
-
-/**
- * @brief Decode the priority of an interrupt
- *
- * @param Priority The priority for the interrupt
- * @param PriorityGroup The used priority group
- * @param pPreemptPriority The preemptive priority value (starting from 0)
- * @param pSubPriority The sub priority value (starting from 0)
- *
- * Decode an interrupt priority value with the given priority group to
- * preemptive priority value and sub priority value.
- * In case of a conflict between priority grouping and available
- * priority bits (__NVIC_PRIO_BITS) the samllest possible priority group is set.
- *
- * The priority value can be retrieved with NVIC_GetPriority(...) function
- */
-static __INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* pPreemptPriority, uint32_t* pSubPriority)
-{
- uint32_t PriorityGroupTmp = (PriorityGroup & 0x07); /* only values 0..7 are used */
- uint32_t PreemptPriorityBits;
- uint32_t SubPriorityBits;
-
- PreemptPriorityBits = ((7 - PriorityGroupTmp) > __NVIC_PRIO_BITS) ? __NVIC_PRIO_BITS : 7 - PriorityGroupTmp;
- SubPriorityBits = ((PriorityGroupTmp + __NVIC_PRIO_BITS) < 7) ? 0 : PriorityGroupTmp - 7 + __NVIC_PRIO_BITS;
-
- *pPreemptPriority = (Priority >> SubPriorityBits) & ((1 << (PreemptPriorityBits)) - 1);
- *pSubPriority = (Priority ) & ((1 << (SubPriorityBits )) - 1);
-}
-
-
-
-/* ################################## SysTick function ############################################ */
-
-#if (!defined (__Vendor_SysTickConfig)) || (__Vendor_SysTickConfig == 0)
-
-/**
- * @brief Initialize and start the SysTick counter and its interrupt.
- *
- * @param ticks number of ticks between two interrupts
- * @return 1 = failed, 0 = successful
- *
- * Initialise the system tick timer and its interrupt and start the
- * system tick timer / counter in free running mode to generate
- * periodical interrupts.
- */
-static __INLINE uint32_t SysTick_Config(uint32_t ticks)
-{
- if (ticks > SysTick_LOAD_RELOAD_Msk) return (1); /* Reload value impossible */
-
- SysTick->LOAD = (ticks & SysTick_LOAD_RELOAD_Msk) - 1; /* set reload register */
- NVIC_SetPriority (SysTick_IRQn, (1<<__NVIC_PRIO_BITS) - 1); /* set Priority for Cortex-M0 System Interrupts */
- SysTick->VAL = 0; /* Load the SysTick Counter Value */
- SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk |
- SysTick_CTRL_TICKINT_Msk |
- SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */
- return (0); /* Function successful */
-}
-
-#endif
-
-
-
-
-/* ################################## Reset function ############################################ */
-
-/**
- * @brief Initiate a system reset request.
- *
- * Initiate a system reset request to reset the MCU
- */
-static __INLINE void NVIC_SystemReset(void)
-{
- SCB->AIRCR = ((0x5FA << SCB_AIRCR_VECTKEY_Pos) |
- (SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) |
- SCB_AIRCR_SYSRESETREQ_Msk); /* Keep priority group unchanged */
- __DSB(); /* Ensure completion of memory access */
- while(1); /* wait until reset */
-}
-
-/*@}*/ /* end of group CMSIS_CM3_Core_FunctionInterface */
-
-
-
-/* ##################################### Debug In/Output function ########################################### */
-
-/** @addtogroup CMSIS_CM3_CoreDebugInterface CMSIS CM3 Core Debug Interface
- Core Debug Interface containing:
- - Core Debug Receive / Transmit Functions
- - Core Debug Defines
- - Core Debug Variables
-*/
-/*@{*/
-
-extern volatile int ITM_RxBuffer; /*!< variable to receive characters */
-#define ITM_RXBUFFER_EMPTY 0x5AA55AA5 /*!< value identifying ITM_RxBuffer is ready for next character */
-
-
-/**
- * @brief Outputs a character via the ITM channel 0
- *
- * @param ch character to output
- * @return character to output
- *
- * The function outputs a character via the ITM channel 0.
- * The function returns when no debugger is connected that has booked the output.
- * It is blocking when a debugger is connected, but the previous character send is not transmitted.
- */
-static __INLINE uint32_t ITM_SendChar (uint32_t ch)
-{
- if ((CoreDebug->DEMCR & CoreDebug_DEMCR_TRCENA_Msk) && /* Trace enabled */
- (ITM->TCR & ITM_TCR_ITMENA_Msk) && /* ITM enabled */
- (ITM->TER & (1ul << 0) ) ) /* ITM Port #0 enabled */
- {
- while (ITM->PORT[0].u32 == 0);
- ITM->PORT[0].u8 = (uint8_t) ch;
- }
- return (ch);
-}
-
-
-/**
- * @brief Inputs a character via variable ITM_RxBuffer
- *
- * @return received character, -1 = no character received
- *
- * The function inputs a character via variable ITM_RxBuffer.
- * The function returns when no debugger is connected that has booked the output.
- * It is blocking when a debugger is connected, but the previous character send is not transmitted.
- */
-static __INLINE int ITM_ReceiveChar (void) {
- int ch = -1; /* no character available */
-
- if (ITM_RxBuffer != ITM_RXBUFFER_EMPTY) {
- ch = ITM_RxBuffer;
- ITM_RxBuffer = ITM_RXBUFFER_EMPTY; /* ready for next character */
- }
-
- return (ch);
-}
-
-
-/**
- * @brief Check if a character via variable ITM_RxBuffer is available
- *
- * @return 1 = character available, 0 = no character available
- *
- * The function checks variable ITM_RxBuffer whether a character is available or not.
- * The function returns '1' if a character is available and '0' if no character is available.
- */
-static __INLINE int ITM_CheckChar (void) {
-
- if (ITM_RxBuffer == ITM_RXBUFFER_EMPTY) {
- return (0); /* no character available */
- } else {
- return (1); /* character available */
- }
-}
-
-/*@}*/ /* end of group CMSIS_CM3_core_DebugInterface */
-
-
-#ifdef __cplusplus
-}
-#endif
-
-/*@}*/ /* end of group CMSIS_CM3_core_definitions */
-
-#endif /* __CM3_CORE_H__ */
-
-/*lint -restore */
diff --git a/os/hal/platforms/LPC13xx/pal_lld.c b/os/hal/platforms/LPC13xx/pal_lld.c index 719329160..faaa99567 100644 --- a/os/hal/platforms/LPC13xx/pal_lld.c +++ b/os/hal/platforms/LPC13xx/pal_lld.c @@ -87,7 +87,7 @@ void _pal_lld_init(const PALConfig *config) { */
void _pal_lld_setgroupmode(ioportid_t port,
ioportmask_t mask,
- uint_fast8_t mode) {
+ iomode_t mode) {
switch (mode) {
case PAL_MODE_RESET:
diff --git a/os/hal/platforms/LPC13xx/pal_lld.h b/os/hal/platforms/LPC13xx/pal_lld.h index 1090ca2f5..6e291dfc9 100644 --- a/os/hal/platforms/LPC13xx/pal_lld.h +++ b/os/hal/platforms/LPC13xx/pal_lld.h @@ -327,7 +327,7 @@ extern "C" { void _pal_lld_init(const PALConfig *config);
void _pal_lld_setgroupmode(ioportid_t port,
ioportmask_t mask,
- uint_fast8_t mode);
+ iomode_t mode);
#ifdef __cplusplus
}
#endif
diff --git a/os/hal/platforms/LPC214x/pal_lld.c b/os/hal/platforms/LPC214x/pal_lld.c index 2e503c631..2ba036e20 100644 --- a/os/hal/platforms/LPC214x/pal_lld.c +++ b/os/hal/platforms/LPC214x/pal_lld.c @@ -96,7 +96,7 @@ void _pal_lld_init(const PALConfig *config) { */
void _pal_lld_setgroupmode(ioportid_t port,
ioportmask_t mask,
- uint_fast8_t mode) {
+ iomode_t mode) {
switch (mode) {
case PAL_MODE_RESET:
diff --git a/os/hal/platforms/LPC214x/pal_lld.h b/os/hal/platforms/LPC214x/pal_lld.h index 90ea9cfae..688e687cc 100644 --- a/os/hal/platforms/LPC214x/pal_lld.h +++ b/os/hal/platforms/LPC214x/pal_lld.h @@ -250,7 +250,7 @@ extern "C" { void _pal_lld_init(const PALConfig *config);
void _pal_lld_setgroupmode(ioportid_t port,
ioportmask_t mask,
- uint_fast8_t mode);
+ iomode_t mode);
#ifdef __cplusplus
}
#endif
diff --git a/os/hal/platforms/MSP430/pal_lld.c b/os/hal/platforms/MSP430/pal_lld.c index 073a6af93..aef4d986a 100644 --- a/os/hal/platforms/MSP430/pal_lld.c +++ b/os/hal/platforms/MSP430/pal_lld.c @@ -121,7 +121,7 @@ void _pal_lld_init(const PALConfig *config) { */
void _pal_lld_setgroupmode(ioportid_t port,
ioportmask_t mask,
- uint_fast8_t mode) {
+ iomode_t mode) {
switch (mode) {
case PAL_MODE_RESET:
diff --git a/os/hal/platforms/MSP430/pal_lld.h b/os/hal/platforms/MSP430/pal_lld.h index 1c0bc5900..282ed4e75 100644 --- a/os/hal/platforms/MSP430/pal_lld.h +++ b/os/hal/platforms/MSP430/pal_lld.h @@ -288,7 +288,7 @@ extern "C" { void _pal_lld_init(const PALConfig *config);
void _pal_lld_setgroupmode(ioportid_t port,
ioportmask_t mask,
- uint_fast8_t mode);
+ iomode_t mode);
#ifdef __cplusplus
}
#endif
diff --git a/os/hal/platforms/Posix/pal_lld.c b/os/hal/platforms/Posix/pal_lld.c index c3d88a8fb..675ddc6c2 100644 --- a/os/hal/platforms/Posix/pal_lld.c +++ b/os/hal/platforms/Posix/pal_lld.c @@ -79,7 +79,7 @@ sim_vio_port_t vio_port_2; */
void _pal_lld_setgroupmode(ioportid_t port,
ioportmask_t mask,
- uint_fast8_t mode) {
+ iomode_t mode) {
switch (mode) {
case PAL_MODE_RESET:
diff --git a/os/hal/platforms/Posix/pal_lld.h b/os/hal/platforms/Posix/pal_lld.h index d02b56dec..d76eacf25 100644 --- a/os/hal/platforms/Posix/pal_lld.h +++ b/os/hal/platforms/Posix/pal_lld.h @@ -196,7 +196,7 @@ extern "C" { #endif
void _pal_lld_setgroupmode(ioportid_t port,
ioportmask_t mask,
- uint_fast8_t mode);
+ iomode_t mode);
#ifdef __cplusplus
}
#endif
diff --git a/os/hal/platforms/STM32/sdc_lld.c b/os/hal/platforms/STM32/DMAv1/sdc_lld.c index a88ad53fa..a88ad53fa 100644 --- a/os/hal/platforms/STM32/sdc_lld.c +++ b/os/hal/platforms/STM32/DMAv1/sdc_lld.c diff --git a/os/hal/platforms/STM32/sdc_lld.h b/os/hal/platforms/STM32/DMAv1/sdc_lld.h index 5466eacad..5466eacad 100644 --- a/os/hal/platforms/STM32/sdc_lld.h +++ b/os/hal/platforms/STM32/DMAv1/sdc_lld.h diff --git a/os/hal/platforms/STM32/spi_lld.c b/os/hal/platforms/STM32/DMAv1/spi_lld.c index d8ae657a7..d8ae657a7 100644 --- a/os/hal/platforms/STM32/spi_lld.c +++ b/os/hal/platforms/STM32/DMAv1/spi_lld.c diff --git a/os/hal/platforms/STM32/spi_lld.h b/os/hal/platforms/STM32/DMAv1/spi_lld.h index 6f1e94096..6f1e94096 100644 --- a/os/hal/platforms/STM32/spi_lld.h +++ b/os/hal/platforms/STM32/DMAv1/spi_lld.h diff --git a/os/hal/platforms/STM32/stm32_dma.c b/os/hal/platforms/STM32/DMAv1/stm32_dma.c index 2232df448..2232df448 100644 --- a/os/hal/platforms/STM32/stm32_dma.c +++ b/os/hal/platforms/STM32/DMAv1/stm32_dma.c diff --git a/os/hal/platforms/STM32/stm32_dma.h b/os/hal/platforms/STM32/DMAv1/stm32_dma.h index 66a2f8c69..66a2f8c69 100644 --- a/os/hal/platforms/STM32/stm32_dma.h +++ b/os/hal/platforms/STM32/DMAv1/stm32_dma.h diff --git a/os/hal/platforms/STM32/uart_lld.c b/os/hal/platforms/STM32/DMAv1/uart_lld.c index e2f306302..e2f306302 100644 --- a/os/hal/platforms/STM32/uart_lld.c +++ b/os/hal/platforms/STM32/DMAv1/uart_lld.c diff --git a/os/hal/platforms/STM32/uart_lld.h b/os/hal/platforms/STM32/DMAv1/uart_lld.h index 9321df85c..9321df85c 100644 --- a/os/hal/platforms/STM32/uart_lld.h +++ b/os/hal/platforms/STM32/DMAv1/uart_lld.h diff --git a/os/hal/platforms/STM32/pal_lld.c b/os/hal/platforms/STM32/GPIOv1/pal_lld.c index c56996db7..a0a1fb6e5 100644 --- a/os/hal/platforms/STM32/pal_lld.c +++ b/os/hal/platforms/STM32/GPIOv1/pal_lld.c @@ -132,7 +132,7 @@ void _pal_lld_init(const PALConfig *config) { */
void _pal_lld_setgroupmode(ioportid_t port,
ioportmask_t mask,
- uint_fast8_t mode) {
+ iomode_t mode) {
static const uint8_t cfgtab[] = {
4, /* PAL_MODE_RESET, implemented as input.*/
2, /* PAL_MODE_UNCONNECTED, implemented as push pull output 2MHz.*/
diff --git a/os/hal/platforms/STM32/pal_lld.h b/os/hal/platforms/STM32/GPIOv1/pal_lld.h index 53067765a..fe2102637 100644 --- a/os/hal/platforms/STM32/pal_lld.h +++ b/os/hal/platforms/STM32/GPIOv1/pal_lld.h @@ -332,7 +332,7 @@ extern "C" { void _pal_lld_init(const PALConfig *config);
void _pal_lld_setgroupmode(ioportid_t port,
ioportmask_t mask,
- uint_fast8_t mode);
+ iomode_t mode);
#ifdef __cplusplus
}
#endif
diff --git a/os/hal/platforms/STM32/GPIOv2/pal_lld.c b/os/hal/platforms/STM32/GPIOv2/pal_lld.c new file mode 100644 index 000000000..c84df64f6 --- /dev/null +++ b/os/hal/platforms/STM32/GPIOv2/pal_lld.c @@ -0,0 +1,221 @@ +/*
+ ChibiOS/RT - Copyright (C) 2006,2007,2008,2009,2010,
+ 2011 Giovanni Di Sirio.
+
+ This file is part of ChibiOS/RT.
+
+ ChibiOS/RT is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 3 of the License, or
+ (at your option) any later version.
+
+ ChibiOS/RT is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+/**
+ * @file STM32/GPIOv2/pal_lld.c
+ * @brief STM32L1xx/STM32F2xx GPIO low level driver code.
+ *
+ * @addtogroup PAL
+ * @{
+ */
+
+#include "ch.h"
+#include "hal.h"
+
+#if HAL_USE_PAL || defined(__DOXYGEN__)
+
+#if defined(STM32L1XX_MD)
+#define AHB_EN_MASK (RCC_AHBENR_GPIOAEN | RCC_AHBENR_GPIOBEN | \
+ RCC_AHBENR_GPIOCEN | RCC_AHBENR_GPIODEN | \
+ RCC_AHBENR_GPIOEEN | RCC_AHBENR_GPIOHEN)
+#define AHB_LPEN_MASK AHB_EN_MASK
+#elif defined(STM32F2XX)
+#define AHB1_EN_MASK (RCC_AHB1ENR_GPIOAEN | RCC_AHB1ENR_GPIOBEN | \
+ RCC_AHB1ENR_GPIOCEN | RCC_AHB1ENR_GPIODEN | \
+ RCC_AHB1ENR_GPIOEEN | RCC_AHB1ENR_GPIOFEN | \
+ RCC_AHB1ENR_GPIOGEN | RCC_AHB1ENR_GPIOHEN | \
+ RCC_AHB1ENR_GPIOIEN)
+#define AHB1_LPEN_MASK AHB1_EN_MASK
+#else
+#error "missing or usupported platform for GPIOv2 PAL driver"
+#endif
+
+/*===========================================================================*/
+/* Driver exported variables. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver local variables. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver local functions. */
+/*===========================================================================*/
+
+static void initgpio(GPIO_TypeDef *gpiop, const stm32_gpio_setup_t *config) {
+
+ gpiop->MODER = config->moder;
+ gpiop->OTYPER = config->otyper;
+ gpiop->OSPEEDR = config->ospeedr;
+ gpiop->PUPDR = config->pupdr;
+ gpiop->ODR = config->odr;
+ gpiop->AFRL = config->afrl;
+ gpiop->AFRH = config->afrh;
+}
+
+/*===========================================================================*/
+/* Driver interrupt handlers. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver exported functions. */
+/*===========================================================================*/
+
+/**
+ * @brief STM32 I/O ports configuration.
+ * @details Ports A-D(E, F, G, H) clocks enabled.
+ *
+ * @param[in] config the STM32 ports configuration
+ *
+ * @notapi
+ */
+void _pal_lld_init(const PALConfig *config) {
+
+ /*
+ * Enables the GPIO related clocks.
+ */
+#if defined(STM32L1XX_MD)
+ RCC->AHBENR |= AHB_EN_MASK;
+ RCC->AHBLPENR |= AHB_LPEN_MASK;
+#elif defined(STM32F2XX)
+ RCC->AHB1ENR |= AHB1_EN_MASK;
+ RCC->AHB1LPENR |= AHB1_LPEN_MASK;
+#endif
+
+ /*
+ * Initial GPIO setup.
+ */
+ initgpio(GPIOA, &config->PAData);
+ initgpio(GPIOB, &config->PBData);
+ initgpio(GPIOC, &config->PCData);
+ initgpio(GPIOD, &config->PDData);
+#if STM32_HAS_GPIOE
+ initgpio(GPIOE, &config->PEData);
+#endif
+#if STM32_HAS_GPIOF
+ initgpio(GPIOF, &config->PFData);
+#endif
+#if STM32_HAS_GPIOG
+ initgpio(GPIOG, &config->PGData);
+#endif
+#if STM32_HAS_GPIOH
+ initgpio(GPIOH, &config->PHData);
+#endif
+#if STM32_HAS_GPIOI
+ initgpio(GPIOI, &config->PIData);
+#endif
+}
+
+/**
+ * @brief Pads mode setup.
+ * @details This function programs a pads group belonging to the same port
+ * with the specified mode.
+ * @note This function is not meant to be invoked directly by the
+ * application code.
+ * @note @p PAL_MODE_UNCONNECTED is implemented as push pull at minimum
+ * speed.
+ *
+ * @param[in] port the port identifier
+ * @param[in] mask the group mask
+ * @param[in] mode the mode
+ *
+ * @notapi
+ */
+#if 1
+void _pal_lld_setgroupmode(ioportid_t port,
+ ioportmask_t mask,
+ iomode_t mode) {
+
+ uint32_t moder = (mode & PAL_STM32_MODE_MASK) >> 0;
+ uint32_t otyper = (mode & PAL_STM32_OTYPE_MASK) >> 2;
+ uint32_t ospeedr = (mode & PAL_STM32_OSPEED_MASK) >> 3;
+ uint32_t pupdr = (mode & PAL_STM32_PUDR_MASK) >> 5;
+ uint32_t altr = (mode & PAL_STM32_ALTERNATE_MASK) >> 7;
+ uint32_t bit = 0;
+ while (TRUE) {
+ if ((mask & 1) != 0) {
+ uint32_t altrmask, m1, m2, m4;
+
+ altrmask = altr << ((bit & 7) * 4);
+ m4 = 15 << ((bit & 7) * 4);
+ if (bit < 8)
+ port->AFRL = (port->AFRL & ~m4) | altrmask;
+ else
+ port->AFRH = (port->AFRH & ~m4) | altrmask;
+ m1 = 1 << bit;
+ port->OTYPER = (port->OTYPER & ~m1) | otyper;
+ m2 = 3 << (bit * 2);
+ port->OSPEEDR = (port->OSPEEDR & ~m2) | ospeedr;
+ port->PUPDR = (port->PUPDR & ~m2) | pupdr;
+ port->MODER = (port->MODER & ~m2) | moder;
+ }
+ mask >>= 1;
+ if (!mask)
+ return;
+ otyper <<= 1;
+ ospeedr <<= 2;
+ pupdr <<= 2;
+ moder <<= 2;
+ bit++;
+ }
+}
+#else
+void _pal_lld_setgroupmode(ioportid_t port,
+ ioportmask_t mask,
+ iomode_t mode) {
+ uint32_t afrm, moderm, pupdrm, otyperm, ospeedrm;
+ uint32_t m1 = (uint32_t)mask;
+ uint32_t m2 = 0;
+ uint32_t m4l = 0;
+ uint32_t m4h = 0;
+ uint32_t bit = 0;
+ do {
+ if ((mask & 1) != 0) {
+ m2 |= 3 << bit;
+ if (bit < 16)
+ m4l |= 15 << ((bit & 14) * 2);
+ else
+ m4h |= 15 << ((bit & 14) * 2);
+ }
+ bit += 2;
+ mask >>= 1;
+ } while (mask);
+
+ afrm = ((mode & PAL_STM32_ALTERNATE_MASK) >> 7) * 0x1111;
+ port->AFRL = (port->AFRL & ~m4l) | (afrm & m4l);
+ port->AFRH = (port->AFRH & ~m4h) | (afrm & m4h);
+
+ ospeedrm = ((mode & PAL_STM32_OSPEED_MASK) >> 3) * 0x5555;
+ port->OSPEEDR = (port->OSPEEDR & ~m2) | (ospeedrm & m2);
+
+ otyperm = ((mode & PAL_STM32_OTYPE_MASK) >> 2) * 0xffff;
+ port->OTYPER = (port->OTYPER & ~m1) | (otyperm & m1);
+
+ pupdrm = ((mode & PAL_STM32_PUDR_MASK) >> 5) * 0x5555;
+ port->PUPDR = (port->PUPDR & ~m2) | (pupdrm & m2);
+
+ moderm = ((mode & PAL_STM32_MODE_MASK) >> 0) * 0x5555;
+ port->MODER = (port->MODER & ~m2) | (moderm & m2);
+}
+#endif
+
+#endif /* HAL_USE_PAL */
+
+/** @} */
diff --git a/os/hal/platforms/STM32L1xx/pal_lld.h b/os/hal/platforms/STM32/GPIOv2/pal_lld.h index 130490fb8..0f9f22441 100644 --- a/os/hal/platforms/STM32L1xx/pal_lld.h +++ b/os/hal/platforms/STM32/GPIOv2/pal_lld.h @@ -19,8 +19,8 @@ */
/**
- * @file STM32L1xx/pal_lld.h
- * @brief STM32L1xx GPIO low level driver header.
+ * @file STM32/GPIOv2/pal_lld.h
+ * @brief STM32L1xx/STM32F2xx GPIO low level driver header.
*
* @addtogroup PAL
* @{
@@ -44,29 +44,29 @@ #undef PAL_MODE_OUTPUT_PUSHPULL
#undef PAL_MODE_OUTPUT_OPENDRAIN
-#define PAL_STM32_MODE_MASK (3 >> 0)
-#define PAL_STM32_MODE_INPUT (0 >> 0)
-#define PAL_STM32_MODE_OUTPUT (1 >> 0)
-#define PAL_STM32_MODE_ALTERNATE (2 >> 0)
-#define PAL_STM32_MODE_ANALOG (3 >> 0)
+#define PAL_STM32_MODE_MASK (3 << 0)
+#define PAL_STM32_MODE_INPUT (0 << 0)
+#define PAL_STM32_MODE_OUTPUT (1 << 0)
+#define PAL_STM32_MODE_ALTERNATE (2 << 0)
+#define PAL_STM32_MODE_ANALOG (3 << 0)
-#define PAL_STM32_OTYPE_MASK (1 >> 2)
-#define PAL_STM32_OTYPE_PUSHPULL (0 >> 2)
-#define PAL_STM32_OTYPE_OPENDRAIN (1 >> 2)
+#define PAL_STM32_OTYPE_MASK (1 << 2)
+#define PAL_STM32_OTYPE_PUSHPULL (0 << 2)
+#define PAL_STM32_OTYPE_OPENDRAIN (1 << 2)
-#define PAL_STM32_OSPEED_MASK (3 >> 3)
-#define PAL_STM32_OSPEED_400K (0 >> 3)
-#define PAL_STM32_OSPEED_2M (1 >> 3)
-#define PAL_STM32_OSPEED_10M (2 >> 3)
-#define PAL_STM32_OSPEED_40M (3 >> 3)
+#define PAL_STM32_OSPEED_MASK (3 << 3)
+#define PAL_STM32_OSPEED_400K (0 << 3)
+#define PAL_STM32_OSPEED_2M (1 << 3)
+#define PAL_STM32_OSPEED_10M (2 << 3)
+#define PAL_STM32_OSPEED_40M (3 << 3)
-#define PAL_STM32_PUDR_MASK (3 >> 5)
-#define PAL_STM32_PUDR_FLOATING (0 >> 5)
-#define PAL_STM32_PUDR_PULLUP (1 >> 5)
-#define PAL_STM32_PUDR_PULLDOWN (2 >> 5)
+#define PAL_STM32_PUDR_MASK (3 << 5)
+#define PAL_STM32_PUDR_FLOATING (0 << 5)
+#define PAL_STM32_PUDR_PULLUP (1 << 5)
+#define PAL_STM32_PUDR_PULLDOWN (2 << 5)
-#define PAL_STM32_ALTERNATE_MASK (15 >> 7)
-#define PAL_STM32_ALTERNATE(n) ((n) >> 7)
+#define PAL_STM32_ALTERNATE_MASK (15 << 7)
+#define PAL_STM32_ALTERNATE(n) ((n) << 7)
/**
* @brief This mode is implemented as input.
@@ -171,6 +171,10 @@ typedef struct { uint32_t pupdr;
/** Initial value for ODR register.*/
uint32_t odr;
+ /** Initial value for AFRL register.*/
+ uint32_t afrl;
+ /** Initial value for AFRH register.*/
+ uint32_t afrh;
} stm32_gpio_setup_t;
/**
@@ -205,6 +209,10 @@ typedef struct { /** @brief Port H setup data.*/
stm32_gpio_setup_t PHData;
#endif
+#if STM32_HAS_GPIOI
+ /** @brief Port I setup data.*/
+ stm32_gpio_setup_t PIData;
+#endif
} PALConfig;
/**
@@ -291,6 +299,20 @@ typedef GPIO_TypeDef * ioportid_t; #define IOPORT7 GPIOG
#endif
+/**
+ * @brief GPIO port H identifier.
+ */
+#if STM32_HAS_GPIOH || defined(__DOXYGEN__)
+#define IOPORT8 GPIOH
+#endif
+
+/**
+ * @brief GPIO port I identifier.
+ */
+#if STM32_HAS_GPIOI || defined(__DOXYGEN__)
+#define IOPORT9 GPIOI
+#endif
+
/*===========================================================================*/
/* Implementation, some of the following macros could be implemented as */
/* functions, please put them in a file named ioports_lld.c if so. */
@@ -448,7 +470,7 @@ extern "C" { void _pal_lld_init(const PALConfig *config);
void _pal_lld_setgroupmode(ioportid_t port,
ioportmask_t mask,
- uint_fast8_t mode);
+ iomode_t mode);
#ifdef __cplusplus
}
#endif
diff --git a/os/hal/platforms/STM32/stm32_usb.h b/os/hal/platforms/STM32/USBv1/stm32_usb.h index 51e7510c4..51e7510c4 100644 --- a/os/hal/platforms/STM32/stm32_usb.h +++ b/os/hal/platforms/STM32/USBv1/stm32_usb.h diff --git a/os/hal/platforms/STM32/usb_lld.c b/os/hal/platforms/STM32/USBv1/usb_lld.c index 331eb38c3..db0c558b6 100644 --- a/os/hal/platforms/STM32/usb_lld.c +++ b/os/hal/platforms/STM32/USBv1/usb_lld.c @@ -171,7 +171,7 @@ static size_t read_packet(usbep_t ep, uint8_t *buf, size_t n){ *
* @isr
*/
-CH_IRQ_HANDLER(USB_HP_IRQHandler) {
+CH_IRQ_HANDLER(Vector8C) {
CH_IRQ_PROLOGUE();
@@ -183,7 +183,7 @@ CH_IRQ_HANDLER(USB_HP_IRQHandler) { *
* @isr
*/
-CH_IRQ_HANDLER(USB_LP_IRQHandler) {
+CH_IRQ_HANDLER(Vector90) {
uint32_t istr;
size_t n;
USBDriver *usbp = &USBD1;
@@ -335,9 +335,9 @@ void usb_lld_start(USBDriver *usbp) { STM32_USB->CNTR = CNTR_FRES;
/* Enabling the USB IRQ vectors, this also gives enough time to allow
the transceiver power up (1uS).*/
- NVICEnableVector(USB_HP_CAN1_TX_IRQn,
+ NVICEnableVector(19,
CORTEX_PRIORITY_MASK(STM32_USB_USB1_HP_IRQ_PRIORITY));
- NVICEnableVector(USB_LP_CAN1_RX0_IRQn,
+ NVICEnableVector(20,
CORTEX_PRIORITY_MASK(STM32_USB_USB1_LP_IRQ_PRIORITY));
/* Releases the USB reset.*/
STM32_USB->CNTR = 0;
@@ -362,8 +362,8 @@ void usb_lld_stop(USBDriver *usbp) { if (usbp->state == USB_STOP) {
#if STM32_ADC_USE_ADC1
if (&USBD1 == usbp) {
- NVICDisableVector(USB_HP_CAN1_TX_IRQn);
- NVICDisableVector(USB_LP_CAN1_RX0_IRQn);
+ NVICDisableVector(19);
+ NVICDisableVector(20);
STM32_USB->CNTR = CNTR_PDWN | CNTR_FRES;
RCC->APB1ENR &= ~RCC_APB1ENR_USBEN;
}
diff --git a/os/hal/platforms/STM32/usb_lld.h b/os/hal/platforms/STM32/USBv1/usb_lld.h index 9b5e9dad2..9b5e9dad2 100644 --- a/os/hal/platforms/STM32/usb_lld.h +++ b/os/hal/platforms/STM32/USBv1/usb_lld.h diff --git a/os/hal/platforms/STM32/core_cm3.h b/os/hal/platforms/STM32/core_cm3.h deleted file mode 100644 index 2e7746f5a..000000000 --- a/os/hal/platforms/STM32/core_cm3.h +++ /dev/null @@ -1,1843 +0,0 @@ -/*
- ChibiOS/RT - Copyright (C) 2006,2007,2008,2009,2010,
- 2011 Giovanni Di Sirio.
-
- This file is part of ChibiOS/RT.
-
- ChibiOS/RT is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 3 of the License, or
- (at your option) any later version.
-
- ChibiOS/RT is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-
-/*
- * Parts of this files have been modified in ChibiOS/RT in order to fix
- * some code quality issues and conflicting declarations.
- */
-
-/**************************************************************************//**
- * @file core_cm3.h
- * @brief CMSIS Cortex-M3 Core Peripheral Access Layer Header File
- * @version V1.30
- * @date 30. October 2009
- *
- * @note
- * Copyright (C) 2009 ARM Limited. All rights reserved.
- *
- * @par
- * ARM Limited (ARM) is supplying this software for use with Cortex-M
- * processor based microcontrollers. This file can be freely distributed
- * within development tools that are supporting such ARM based processors.
- *
- * @par
- * THIS SOFTWARE IS PROVIDED "AS IS". NO WARRANTIES, WHETHER EXPRESS, IMPLIED
- * OR STATUTORY, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE.
- * ARM SHALL NOT, IN ANY CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR
- * CONSEQUENTIAL DAMAGES, FOR ANY REASON WHATSOEVER.
- *
- ******************************************************************************/
-
-#ifndef __CM3_CORE_H__
-#define __CM3_CORE_H__
-
-/** @addtogroup CMSIS_CM3_core_LintCinfiguration CMSIS CM3 Core Lint Configuration
- *
- * List of Lint messages which will be suppressed and not shown:
- * - Error 10: \n
- * register uint32_t __regBasePri __asm("basepri"); \n
- * Error 10: Expecting ';'
- * .
- * - Error 530: \n
- * return(__regBasePri); \n
- * Warning 530: Symbol '__regBasePri' (line 264) not initialized
- * .
- * - Error 550: \n
- * __regBasePri = (basePri & 0x1ff); \n
- * Warning 550: Symbol '__regBasePri' (line 271) not accessed
- * .
- * - Error 754: \n
- * uint32_t RESERVED0[24]; \n
- * Info 754: local structure member '<some, not used in the HAL>' (line 109, file ./cm3_core.h) not referenced
- * .
- * - Error 750: \n
- * #define __CM3_CORE_H__ \n
- * Info 750: local macro '__CM3_CORE_H__' (line 43, file./cm3_core.h) not referenced
- * .
- * - Error 528: \n
- * static __INLINE void NVIC_DisableIRQ(uint32_t IRQn) \n
- * Warning 528: Symbol 'NVIC_DisableIRQ(unsigned int)' (line 419, file ./cm3_core.h) not referenced
- * .
- * - Error 751: \n
- * } InterruptType_Type; \n
- * Info 751: local typedef 'InterruptType_Type' (line 170, file ./cm3_core.h) not referenced
- * .
- * Note: To re-enable a Message, insert a space before 'lint' *
- *
- */
-
-/*lint -save */
-/*lint -e10 */
-/*lint -e530 */
-/*lint -e550 */
-/*lint -e754 */
-/*lint -e750 */
-/*lint -e528 */
-/*lint -e751 */
-
-
-/** @addtogroup CMSIS_CM3_core_definitions CM3 Core Definitions
- This file defines all structures and symbols for CMSIS core:
- - CMSIS version number
- - Cortex-M core registers and bitfields
- - Cortex-M core peripheral base address
- @{
- */
-
-#ifdef __cplusplus
- extern "C" {
-#endif
-
-#define __CM3_CMSIS_VERSION_MAIN (0x01) /*!< [31:16] CMSIS HAL main version */
-#define __CM3_CMSIS_VERSION_SUB (0x30) /*!< [15:0] CMSIS HAL sub version */
-#define __CM3_CMSIS_VERSION ((__CM3_CMSIS_VERSION_MAIN << 16) | __CM3_CMSIS_VERSION_SUB) /*!< CMSIS HAL version number */
-
-#define __CORTEX_M (0x03) /*!< Cortex core */
-
-#include <stdint.h> /* Include standard types */
-
-#if defined (__ICCARM__)
- #include <intrinsics.h> /* IAR Intrinsics */
-#endif
-
-
-#ifndef __NVIC_PRIO_BITS
- #define __NVIC_PRIO_BITS 4 /*!< standard definition for NVIC Priority Bits */
-#endif
-
-
-
-
-/**
- * IO definitions
- *
- * define access restrictions to peripheral registers
- */
-
-#ifdef __cplusplus
- #define __I volatile /*!< defines 'read only' permissions */
-#else
- #define __I volatile const /*!< defines 'read only' permissions */
-#endif
-#define __O volatile /*!< defines 'write only' permissions */
-#define __IO volatile /*!< defines 'read / write' permissions */
-
-
-
-/*******************************************************************************
- * Register Abstraction
- ******************************************************************************/
-/** @addtogroup CMSIS_CM3_core_register CMSIS CM3 Core Register
- @{
-*/
-
-
-/** @addtogroup CMSIS_CM3_NVIC CMSIS CM3 NVIC
- memory mapped structure for Nested Vectored Interrupt Controller (NVIC)
- @{
- */
-typedef struct
-{
- __IO uint32_t ISER[8]; /*!< Offset: 0x000 Interrupt Set Enable Register */
- uint32_t RESERVED0[24];
- __IO uint32_t ICER[8]; /*!< Offset: 0x080 Interrupt Clear Enable Register */
- uint32_t RSERVED1[24];
- __IO uint32_t ISPR[8]; /*!< Offset: 0x100 Interrupt Set Pending Register */
- uint32_t RESERVED2[24];
- __IO uint32_t ICPR[8]; /*!< Offset: 0x180 Interrupt Clear Pending Register */
- uint32_t RESERVED3[24];
- __IO uint32_t IABR[8]; /*!< Offset: 0x200 Interrupt Active bit Register */
- uint32_t RESERVED4[56];
- __IO uint8_t IP[240]; /*!< Offset: 0x300 Interrupt Priority Register (8Bit wide) */
- uint32_t RESERVED5[644];
- __O uint32_t STIR; /*!< Offset: 0xE00 Software Trigger Interrupt Register */
-} NVIC_Type;
-/*@}*/ /* end of group CMSIS_CM3_NVIC */
-
-
-/** @addtogroup CMSIS_CM3_SCB CMSIS CM3 SCB
- memory mapped structure for System Control Block (SCB)
- @{
- */
-typedef struct
-{
- __I uint32_t CPUID; /*!< Offset: 0x00 CPU ID Base Register */
- __IO uint32_t ICSR; /*!< Offset: 0x04 Interrupt Control State Register */
- __IO uint32_t VTOR; /*!< Offset: 0x08 Vector Table Offset Register */
- __IO uint32_t AIRCR; /*!< Offset: 0x0C Application Interrupt / Reset Control Register */
- __IO uint32_t SCR; /*!< Offset: 0x10 System Control Register */
- __IO uint32_t CCR; /*!< Offset: 0x14 Configuration Control Register */
- __IO uint8_t SHP[12]; /*!< Offset: 0x18 System Handlers Priority Registers (4-7, 8-11, 12-15) */
- __IO uint32_t SHCSR; /*!< Offset: 0x24 System Handler Control and State Register */
- __IO uint32_t CFSR; /*!< Offset: 0x28 Configurable Fault Status Register */
- __IO uint32_t HFSR; /*!< Offset: 0x2C Hard Fault Status Register */
- __IO uint32_t DFSR; /*!< Offset: 0x30 Debug Fault Status Register */
- __IO uint32_t MMFAR; /*!< Offset: 0x34 Mem Manage Address Register */
- __IO uint32_t BFAR; /*!< Offset: 0x38 Bus Fault Address Register */
- __IO uint32_t AFSR; /*!< Offset: 0x3C Auxiliary Fault Status Register */
- __I uint32_t PFR[2]; /*!< Offset: 0x40 Processor Feature Register */
- __I uint32_t DFR; /*!< Offset: 0x48 Debug Feature Register */
- __I uint32_t ADR; /*!< Offset: 0x4C Auxiliary Feature Register */
- __I uint32_t MMFR[4]; /*!< Offset: 0x50 Memory Model Feature Register */
- __I uint32_t ISAR[5]; /*!< Offset: 0x60 ISA Feature Register */
-} SCB_Type;
-
-/* SCB CPUID Register Definitions */
-#define SCB_CPUID_IMPLEMENTER_Pos 24 /*!< SCB CPUID: IMPLEMENTER Position */
-#define SCB_CPUID_IMPLEMENTER_Msk (0xFFul << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */
-
-#define SCB_CPUID_VARIANT_Pos 20 /*!< SCB CPUID: VARIANT Position */
-#define SCB_CPUID_VARIANT_Msk (0xFul << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */
-
-#define SCB_CPUID_PARTNO_Pos 4 /*!< SCB CPUID: PARTNO Position */
-#define SCB_CPUID_PARTNO_Msk (0xFFFul << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */
-
-#define SCB_CPUID_REVISION_Pos 0 /*!< SCB CPUID: REVISION Position */
-#define SCB_CPUID_REVISION_Msk (0xFul << SCB_CPUID_REVISION_Pos) /*!< SCB CPUID: REVISION Mask */
-
-/* SCB Interrupt Control State Register Definitions */
-#define SCB_ICSR_NMIPENDSET_Pos 31 /*!< SCB ICSR: NMIPENDSET Position */
-#define SCB_ICSR_NMIPENDSET_Msk (1ul << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */
-
-#define SCB_ICSR_PENDSVSET_Pos 28 /*!< SCB ICSR: PENDSVSET Position */
-#define SCB_ICSR_PENDSVSET_Msk (1ul << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */
-
-#define SCB_ICSR_PENDSVCLR_Pos 27 /*!< SCB ICSR: PENDSVCLR Position */
-#define SCB_ICSR_PENDSVCLR_Msk (1ul << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */
-
-#define SCB_ICSR_PENDSTSET_Pos 26 /*!< SCB ICSR: PENDSTSET Position */
-#define SCB_ICSR_PENDSTSET_Msk (1ul << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */
-
-#define SCB_ICSR_PENDSTCLR_Pos 25 /*!< SCB ICSR: PENDSTCLR Position */
-#define SCB_ICSR_PENDSTCLR_Msk (1ul << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */
-
-#define SCB_ICSR_ISRPREEMPT_Pos 23 /*!< SCB ICSR: ISRPREEMPT Position */
-#define SCB_ICSR_ISRPREEMPT_Msk (1ul << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */
-
-#define SCB_ICSR_ISRPENDING_Pos 22 /*!< SCB ICSR: ISRPENDING Position */
-#define SCB_ICSR_ISRPENDING_Msk (1ul << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */
-
-#define SCB_ICSR_VECTPENDING_Pos 12 /*!< SCB ICSR: VECTPENDING Position */
-#define SCB_ICSR_VECTPENDING_Msk (0x1FFul << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */
-
-#define SCB_ICSR_RETTOBASE_Pos 11 /*!< SCB ICSR: RETTOBASE Position */
-#define SCB_ICSR_RETTOBASE_Msk (1ul << SCB_ICSR_RETTOBASE_Pos) /*!< SCB ICSR: RETTOBASE Mask */
-
-#define SCB_ICSR_VECTACTIVE_Pos 0 /*!< SCB ICSR: VECTACTIVE Position */
-#define SCB_ICSR_VECTACTIVE_Msk (0x1FFul << SCB_ICSR_VECTACTIVE_Pos) /*!< SCB ICSR: VECTACTIVE Mask */
-
-/* SCB Interrupt Control State Register Definitions */
-#define SCB_VTOR_TBLBASE_Pos 29 /*!< SCB VTOR: TBLBASE Position */
-#define SCB_VTOR_TBLBASE_Msk (0x1FFul << SCB_VTOR_TBLBASE_Pos) /*!< SCB VTOR: TBLBASE Mask */
-
-#define SCB_VTOR_TBLOFF_Pos 7 /*!< SCB VTOR: TBLOFF Position */
-#define SCB_VTOR_TBLOFF_Msk (0x3FFFFFul << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */
-
-/* SCB Application Interrupt and Reset Control Register Definitions */
-#define SCB_AIRCR_VECTKEY_Pos 16 /*!< SCB AIRCR: VECTKEY Position */
-#define SCB_AIRCR_VECTKEY_Msk (0xFFFFul << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */
-
-#define SCB_AIRCR_VECTKEYSTAT_Pos 16 /*!< SCB AIRCR: VECTKEYSTAT Position */
-#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFul << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */
-
-#define SCB_AIRCR_ENDIANESS_Pos 15 /*!< SCB AIRCR: ENDIANESS Position */
-#define SCB_AIRCR_ENDIANESS_Msk (1ul << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */
-
-#define SCB_AIRCR_PRIGROUP_Pos 8 /*!< SCB AIRCR: PRIGROUP Position */
-#define SCB_AIRCR_PRIGROUP_Msk (7ul << SCB_AIRCR_PRIGROUP_Pos) /*!< SCB AIRCR: PRIGROUP Mask */
-
-#define SCB_AIRCR_SYSRESETREQ_Pos 2 /*!< SCB AIRCR: SYSRESETREQ Position */
-#define SCB_AIRCR_SYSRESETREQ_Msk (1ul << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */
-
-#define SCB_AIRCR_VECTCLRACTIVE_Pos 1 /*!< SCB AIRCR: VECTCLRACTIVE Position */
-#define SCB_AIRCR_VECTCLRACTIVE_Msk (1ul << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */
-
-#define SCB_AIRCR_VECTRESET_Pos 0 /*!< SCB AIRCR: VECTRESET Position */
-#define SCB_AIRCR_VECTRESET_Msk (1ul << SCB_AIRCR_VECTRESET_Pos) /*!< SCB AIRCR: VECTRESET Mask */
-
-/* SCB System Control Register Definitions */
-#define SCB_SCR_SEVONPEND_Pos 4 /*!< SCB SCR: SEVONPEND Position */
-#define SCB_SCR_SEVONPEND_Msk (1ul << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */
-
-#define SCB_SCR_SLEEPDEEP_Pos 2 /*!< SCB SCR: SLEEPDEEP Position */
-#define SCB_SCR_SLEEPDEEP_Msk (1ul << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */
-
-#define SCB_SCR_SLEEPONEXIT_Pos 1 /*!< SCB SCR: SLEEPONEXIT Position */
-#define SCB_SCR_SLEEPONEXIT_Msk (1ul << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */
-
-/* SCB Configuration Control Register Definitions */
-#define SCB_CCR_STKALIGN_Pos 9 /*!< SCB CCR: STKALIGN Position */
-#define SCB_CCR_STKALIGN_Msk (1ul << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */
-
-#define SCB_CCR_BFHFNMIGN_Pos 8 /*!< SCB CCR: BFHFNMIGN Position */
-#define SCB_CCR_BFHFNMIGN_Msk (1ul << SCB_CCR_BFHFNMIGN_Pos) /*!< SCB CCR: BFHFNMIGN Mask */
-
-#define SCB_CCR_DIV_0_TRP_Pos 4 /*!< SCB CCR: DIV_0_TRP Position */
-#define SCB_CCR_DIV_0_TRP_Msk (1ul << SCB_CCR_DIV_0_TRP_Pos) /*!< SCB CCR: DIV_0_TRP Mask */
-
-#define SCB_CCR_UNALIGN_TRP_Pos 3 /*!< SCB CCR: UNALIGN_TRP Position */
-#define SCB_CCR_UNALIGN_TRP_Msk (1ul << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */
-
-#define SCB_CCR_USERSETMPEND_Pos 1 /*!< SCB CCR: USERSETMPEND Position */
-#define SCB_CCR_USERSETMPEND_Msk (1ul << SCB_CCR_USERSETMPEND_Pos) /*!< SCB CCR: USERSETMPEND Mask */
-
-#define SCB_CCR_NONBASETHRDENA_Pos 0 /*!< SCB CCR: NONBASETHRDENA Position */
-#define SCB_CCR_NONBASETHRDENA_Msk (1ul << SCB_CCR_NONBASETHRDENA_Pos) /*!< SCB CCR: NONBASETHRDENA Mask */
-
-/* SCB System Handler Control and State Register Definitions */
-#define SCB_SHCSR_USGFAULTENA_Pos 18 /*!< SCB SHCSR: USGFAULTENA Position */
-#define SCB_SHCSR_USGFAULTENA_Msk (1ul << SCB_SHCSR_USGFAULTENA_Pos) /*!< SCB SHCSR: USGFAULTENA Mask */
-
-#define SCB_SHCSR_BUSFAULTENA_Pos 17 /*!< SCB SHCSR: BUSFAULTENA Position */
-#define SCB_SHCSR_BUSFAULTENA_Msk (1ul << SCB_SHCSR_BUSFAULTENA_Pos) /*!< SCB SHCSR: BUSFAULTENA Mask */
-
-#define SCB_SHCSR_MEMFAULTENA_Pos 16 /*!< SCB SHCSR: MEMFAULTENA Position */
-#define SCB_SHCSR_MEMFAULTENA_Msk (1ul << SCB_SHCSR_MEMFAULTENA_Pos) /*!< SCB SHCSR: MEMFAULTENA Mask */
-
-#define SCB_SHCSR_SVCALLPENDED_Pos 15 /*!< SCB SHCSR: SVCALLPENDED Position */
-#define SCB_SHCSR_SVCALLPENDED_Msk (1ul << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */
-
-#define SCB_SHCSR_BUSFAULTPENDED_Pos 14 /*!< SCB SHCSR: BUSFAULTPENDED Position */
-#define SCB_SHCSR_BUSFAULTPENDED_Msk (1ul << SCB_SHCSR_BUSFAULTPENDED_Pos) /*!< SCB SHCSR: BUSFAULTPENDED Mask */
-
-#define SCB_SHCSR_MEMFAULTPENDED_Pos 13 /*!< SCB SHCSR: MEMFAULTPENDED Position */
-#define SCB_SHCSR_MEMFAULTPENDED_Msk (1ul << SCB_SHCSR_MEMFAULTPENDED_Pos) /*!< SCB SHCSR: MEMFAULTPENDED Mask */
-
-#define SCB_SHCSR_USGFAULTPENDED_Pos 12 /*!< SCB SHCSR: USGFAULTPENDED Position */
-#define SCB_SHCSR_USGFAULTPENDED_Msk (1ul << SCB_SHCSR_USGFAULTPENDED_Pos) /*!< SCB SHCSR: USGFAULTPENDED Mask */
-
-#define SCB_SHCSR_SYSTICKACT_Pos 11 /*!< SCB SHCSR: SYSTICKACT Position */
-#define SCB_SHCSR_SYSTICKACT_Msk (1ul << SCB_SHCSR_SYSTICKACT_Pos) /*!< SCB SHCSR: SYSTICKACT Mask */
-
-#define SCB_SHCSR_PENDSVACT_Pos 10 /*!< SCB SHCSR: PENDSVACT Position */
-#define SCB_SHCSR_PENDSVACT_Msk (1ul << SCB_SHCSR_PENDSVACT_Pos) /*!< SCB SHCSR: PENDSVACT Mask */
-
-#define SCB_SHCSR_MONITORACT_Pos 8 /*!< SCB SHCSR: MONITORACT Position */
-#define SCB_SHCSR_MONITORACT_Msk (1ul << SCB_SHCSR_MONITORACT_Pos) /*!< SCB SHCSR: MONITORACT Mask */
-
-#define SCB_SHCSR_SVCALLACT_Pos 7 /*!< SCB SHCSR: SVCALLACT Position */
-#define SCB_SHCSR_SVCALLACT_Msk (1ul << SCB_SHCSR_SVCALLACT_Pos) /*!< SCB SHCSR: SVCALLACT Mask */
-
-#define SCB_SHCSR_USGFAULTACT_Pos 3 /*!< SCB SHCSR: USGFAULTACT Position */
-#define SCB_SHCSR_USGFAULTACT_Msk (1ul << SCB_SHCSR_USGFAULTACT_Pos) /*!< SCB SHCSR: USGFAULTACT Mask */
-
-#define SCB_SHCSR_BUSFAULTACT_Pos 1 /*!< SCB SHCSR: BUSFAULTACT Position */
-#define SCB_SHCSR_BUSFAULTACT_Msk (1ul << SCB_SHCSR_BUSFAULTACT_Pos) /*!< SCB SHCSR: BUSFAULTACT Mask */
-
-#define SCB_SHCSR_MEMFAULTACT_Pos 0 /*!< SCB SHCSR: MEMFAULTACT Position */
-#define SCB_SHCSR_MEMFAULTACT_Msk (1ul << SCB_SHCSR_MEMFAULTACT_Pos) /*!< SCB SHCSR: MEMFAULTACT Mask */
-
-/* SCB Configurable Fault Status Registers Definitions */
-#define SCB_CFSR_USGFAULTSR_Pos 16 /*!< SCB CFSR: Usage Fault Status Register Position */
-#define SCB_CFSR_USGFAULTSR_Msk (0xFFFFul << SCB_CFSR_USGFAULTSR_Pos) /*!< SCB CFSR: Usage Fault Status Register Mask */
-
-#define SCB_CFSR_BUSFAULTSR_Pos 8 /*!< SCB CFSR: Bus Fault Status Register Position */
-#define SCB_CFSR_BUSFAULTSR_Msk (0xFFul << SCB_CFSR_BUSFAULTSR_Pos) /*!< SCB CFSR: Bus Fault Status Register Mask */
-
-#define SCB_CFSR_MEMFAULTSR_Pos 0 /*!< SCB CFSR: Memory Manage Fault Status Register Position */
-#define SCB_CFSR_MEMFAULTSR_Msk (0xFFul << SCB_CFSR_MEMFAULTSR_Pos) /*!< SCB CFSR: Memory Manage Fault Status Register Mask */
-
-/* SCB Hard Fault Status Registers Definitions */
-#define SCB_HFSR_DEBUGEVT_Pos 31 /*!< SCB HFSR: DEBUGEVT Position */
-#define SCB_HFSR_DEBUGEVT_Msk (1ul << SCB_HFSR_DEBUGEVT_Pos) /*!< SCB HFSR: DEBUGEVT Mask */
-
-#define SCB_HFSR_FORCED_Pos 30 /*!< SCB HFSR: FORCED Position */
-#define SCB_HFSR_FORCED_Msk (1ul << SCB_HFSR_FORCED_Pos) /*!< SCB HFSR: FORCED Mask */
-
-#define SCB_HFSR_VECTTBL_Pos 1 /*!< SCB HFSR: VECTTBL Position */
-#define SCB_HFSR_VECTTBL_Msk (1ul << SCB_HFSR_VECTTBL_Pos) /*!< SCB HFSR: VECTTBL Mask */
-
-/* SCB Debug Fault Status Register Definitions */
-#define SCB_DFSR_EXTERNAL_Pos 4 /*!< SCB DFSR: EXTERNAL Position */
-#define SCB_DFSR_EXTERNAL_Msk (1ul << SCB_DFSR_EXTERNAL_Pos) /*!< SCB DFSR: EXTERNAL Mask */
-
-#define SCB_DFSR_VCATCH_Pos 3 /*!< SCB DFSR: VCATCH Position */
-#define SCB_DFSR_VCATCH_Msk (1ul << SCB_DFSR_VCATCH_Pos) /*!< SCB DFSR: VCATCH Mask */
-
-#define SCB_DFSR_DWTTRAP_Pos 2 /*!< SCB DFSR: DWTTRAP Position */
-#define SCB_DFSR_DWTTRAP_Msk (1ul << SCB_DFSR_DWTTRAP_Pos) /*!< SCB DFSR: DWTTRAP Mask */
-
-#define SCB_DFSR_BKPT_Pos 1 /*!< SCB DFSR: BKPT Position */
-#define SCB_DFSR_BKPT_Msk (1ul << SCB_DFSR_BKPT_Pos) /*!< SCB DFSR: BKPT Mask */
-
-#define SCB_DFSR_HALTED_Pos 0 /*!< SCB DFSR: HALTED Position */
-#define SCB_DFSR_HALTED_Msk (1ul << SCB_DFSR_HALTED_Pos) /*!< SCB DFSR: HALTED Mask */
-/*@}*/ /* end of group CMSIS_CM3_SCB */
-
-
-/** @addtogroup CMSIS_CM3_SysTick CMSIS CM3 SysTick
- memory mapped structure for SysTick
- @{
- */
-typedef struct
-{
- __IO uint32_t CTRL; /*!< Offset: 0x00 SysTick Control and Status Register */
- __IO uint32_t LOAD; /*!< Offset: 0x04 SysTick Reload Value Register */
- __IO uint32_t VAL; /*!< Offset: 0x08 SysTick Current Value Register */
- __I uint32_t CALIB; /*!< Offset: 0x0C SysTick Calibration Register */
-} SysTick_Type;
-
-/* SysTick Control / Status Register Definitions */
-#define SysTick_CTRL_COUNTFLAG_Pos 16 /*!< SysTick CTRL: COUNTFLAG Position */
-#define SysTick_CTRL_COUNTFLAG_Msk (1ul << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */
-
-#define SysTick_CTRL_CLKSOURCE_Pos 2 /*!< SysTick CTRL: CLKSOURCE Position */
-#define SysTick_CTRL_CLKSOURCE_Msk (1ul << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */
-
-#define SysTick_CTRL_TICKINT_Pos 1 /*!< SysTick CTRL: TICKINT Position */
-#define SysTick_CTRL_TICKINT_Msk (1ul << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */
-
-#define SysTick_CTRL_ENABLE_Pos 0 /*!< SysTick CTRL: ENABLE Position */
-#define SysTick_CTRL_ENABLE_Msk (1ul << SysTick_CTRL_ENABLE_Pos) /*!< SysTick CTRL: ENABLE Mask */
-
-/* SysTick Reload Register Definitions */
-#define SysTick_LOAD_RELOAD_Pos 0 /*!< SysTick LOAD: RELOAD Position */
-#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFul << SysTick_LOAD_RELOAD_Pos) /*!< SysTick LOAD: RELOAD Mask */
-
-/* SysTick Current Register Definitions */
-#define SysTick_VAL_CURRENT_Pos 0 /*!< SysTick VAL: CURRENT Position */
-#define SysTick_VAL_CURRENT_Msk (0xFFFFFFul << SysTick_VAL_CURRENT_Pos) /*!< SysTick VAL: CURRENT Mask */
-
-/* SysTick Calibration Register Definitions */
-#define SysTick_CALIB_NOREF_Pos 31 /*!< SysTick CALIB: NOREF Position */
-#define SysTick_CALIB_NOREF_Msk (1ul << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */
-
-#define SysTick_CALIB_SKEW_Pos 30 /*!< SysTick CALIB: SKEW Position */
-#define SysTick_CALIB_SKEW_Msk (1ul << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */
-
-#define SysTick_CALIB_TENMS_Pos 0 /*!< SysTick CALIB: TENMS Position */
-#define SysTick_CALIB_TENMS_Msk (0xFFFFFFul << SysTick_VAL_CURRENT_Pos) /*!< SysTick CALIB: TENMS Mask */
-/*@}*/ /* end of group CMSIS_CM3_SysTick */
-
-
-/** @addtogroup CMSIS_CM3_ITM CMSIS CM3 ITM
- memory mapped structure for Instrumentation Trace Macrocell (ITM)
- @{
- */
-typedef struct
-{
- __O union
- {
- __O uint8_t u8; /*!< Offset: ITM Stimulus Port 8-bit */
- __O uint16_t u16; /*!< Offset: ITM Stimulus Port 16-bit */
- __O uint32_t u32; /*!< Offset: ITM Stimulus Port 32-bit */
- } PORT [32]; /*!< Offset: 0x00 ITM Stimulus Port Registers */
- uint32_t RESERVED0[864];
- __IO uint32_t TER; /*!< Offset: ITM Trace Enable Register */
- uint32_t RESERVED1[15];
- __IO uint32_t TPR; /*!< Offset: ITM Trace Privilege Register */
- uint32_t RESERVED2[15];
- __IO uint32_t TCR; /*!< Offset: ITM Trace Control Register */
- uint32_t RESERVED3[29];
- __IO uint32_t IWR; /*!< Offset: ITM Integration Write Register */
- __IO uint32_t IRR; /*!< Offset: ITM Integration Read Register */
- __IO uint32_t IMCR; /*!< Offset: ITM Integration Mode Control Register */
- uint32_t RESERVED4[43];
- __IO uint32_t LAR; /*!< Offset: ITM Lock Access Register */
- __IO uint32_t LSR; /*!< Offset: ITM Lock Status Register */
- uint32_t RESERVED5[6];
- __I uint32_t PID4; /*!< Offset: ITM Peripheral Identification Register #4 */
- __I uint32_t PID5; /*!< Offset: ITM Peripheral Identification Register #5 */
- __I uint32_t PID6; /*!< Offset: ITM Peripheral Identification Register #6 */
- __I uint32_t PID7; /*!< Offset: ITM Peripheral Identification Register #7 */
- __I uint32_t PID0; /*!< Offset: ITM Peripheral Identification Register #0 */
- __I uint32_t PID1; /*!< Offset: ITM Peripheral Identification Register #1 */
- __I uint32_t PID2; /*!< Offset: ITM Peripheral Identification Register #2 */
- __I uint32_t PID3; /*!< Offset: ITM Peripheral Identification Register #3 */
- __I uint32_t CID0; /*!< Offset: ITM Component Identification Register #0 */
- __I uint32_t CID1; /*!< Offset: ITM Component Identification Register #1 */
- __I uint32_t CID2; /*!< Offset: ITM Component Identification Register #2 */
- __I uint32_t CID3; /*!< Offset: ITM Component Identification Register #3 */
-} ITM_Type;
-
-/* ITM Trace Privilege Register Definitions */
-#define ITM_TPR_PRIVMASK_Pos 0 /*!< ITM TPR: PRIVMASK Position */
-#define ITM_TPR_PRIVMASK_Msk (0xFul << ITM_TPR_PRIVMASK_Pos) /*!< ITM TPR: PRIVMASK Mask */
-
-/* ITM Trace Control Register Definitions */
-#define ITM_TCR_BUSY_Pos 23 /*!< ITM TCR: BUSY Position */
-#define ITM_TCR_BUSY_Msk (1ul << ITM_TCR_BUSY_Pos) /*!< ITM TCR: BUSY Mask */
-
-#define ITM_TCR_ATBID_Pos 16 /*!< ITM TCR: ATBID Position */
-#define ITM_TCR_ATBID_Msk (0x7Ful << ITM_TCR_ATBID_Pos) /*!< ITM TCR: ATBID Mask */
-
-#define ITM_TCR_TSPrescale_Pos 8 /*!< ITM TCR: TSPrescale Position */
-#define ITM_TCR_TSPrescale_Msk (3ul << ITM_TCR_TSPrescale_Pos) /*!< ITM TCR: TSPrescale Mask */
-
-#define ITM_TCR_SWOENA_Pos 4 /*!< ITM TCR: SWOENA Position */
-#define ITM_TCR_SWOENA_Msk (1ul << ITM_TCR_SWOENA_Pos) /*!< ITM TCR: SWOENA Mask */
-
-#define ITM_TCR_DWTENA_Pos 3 /*!< ITM TCR: DWTENA Position */
-#define ITM_TCR_DWTENA_Msk (1ul << ITM_TCR_DWTENA_Pos) /*!< ITM TCR: DWTENA Mask */
-
-#define ITM_TCR_SYNCENA_Pos 2 /*!< ITM TCR: SYNCENA Position */
-#define ITM_TCR_SYNCENA_Msk (1ul << ITM_TCR_SYNCENA_Pos) /*!< ITM TCR: SYNCENA Mask */
-
-#define ITM_TCR_TSENA_Pos 1 /*!< ITM TCR: TSENA Position */
-#define ITM_TCR_TSENA_Msk (1ul << ITM_TCR_TSENA_Pos) /*!< ITM TCR: TSENA Mask */
-
-#define ITM_TCR_ITMENA_Pos 0 /*!< ITM TCR: ITM Enable bit Position */
-#define ITM_TCR_ITMENA_Msk (1ul << ITM_TCR_ITMENA_Pos) /*!< ITM TCR: ITM Enable bit Mask */
-
-/* ITM Integration Write Register Definitions */
-#define ITM_IWR_ATVALIDM_Pos 0 /*!< ITM IWR: ATVALIDM Position */
-#define ITM_IWR_ATVALIDM_Msk (1ul << ITM_IWR_ATVALIDM_Pos) /*!< ITM IWR: ATVALIDM Mask */
-
-/* ITM Integration Read Register Definitions */
-#define ITM_IRR_ATREADYM_Pos 0 /*!< ITM IRR: ATREADYM Position */
-#define ITM_IRR_ATREADYM_Msk (1ul << ITM_IRR_ATREADYM_Pos) /*!< ITM IRR: ATREADYM Mask */
-
-/* ITM Integration Mode Control Register Definitions */
-#define ITM_IMCR_INTEGRATION_Pos 0 /*!< ITM IMCR: INTEGRATION Position */
-#define ITM_IMCR_INTEGRATION_Msk (1ul << ITM_IMCR_INTEGRATION_Pos) /*!< ITM IMCR: INTEGRATION Mask */
-
-/* ITM Lock Status Register Definitions */
-#define ITM_LSR_ByteAcc_Pos 2 /*!< ITM LSR: ByteAcc Position */
-#define ITM_LSR_ByteAcc_Msk (1ul << ITM_LSR_ByteAcc_Pos) /*!< ITM LSR: ByteAcc Mask */
-
-#define ITM_LSR_Access_Pos 1 /*!< ITM LSR: Access Position */
-#define ITM_LSR_Access_Msk (1ul << ITM_LSR_Access_Pos) /*!< ITM LSR: Access Mask */
-
-#define ITM_LSR_Present_Pos 0 /*!< ITM LSR: Present Position */
-#define ITM_LSR_Present_Msk (1ul << ITM_LSR_Present_Pos) /*!< ITM LSR: Present Mask */
-/*@}*/ /* end of group CMSIS_CM3_ITM */
-
-
-/** @addtogroup CMSIS_CM3_InterruptType CMSIS CM3 Interrupt Type
- memory mapped structure for Interrupt Type
- @{
- */
-typedef struct
-{
- uint32_t RESERVED0;
- __I uint32_t ICTR; /*!< Offset: 0x04 Interrupt Control Type Register */
-#if ((defined __CM3_REV) && (__CM3_REV >= 0x200))
- __IO uint32_t ACTLR; /*!< Offset: 0x08 Auxiliary Control Register */
-#else
- uint32_t RESERVED1;
-#endif
-} InterruptType_Type;
-
-/* Interrupt Controller Type Register Definitions */
-#define InterruptType_ICTR_INTLINESNUM_Pos 0 /*!< InterruptType ICTR: INTLINESNUM Position */
-#define InterruptType_ICTR_INTLINESNUM_Msk (0x1Ful << InterruptType_ICTR_INTLINESNUM_Pos) /*!< InterruptType ICTR: INTLINESNUM Mask */
-
-/* Auxiliary Control Register Definitions */
-#define InterruptType_ACTLR_DISFOLD_Pos 2 /*!< InterruptType ACTLR: DISFOLD Position */
-#define InterruptType_ACTLR_DISFOLD_Msk (1ul << InterruptType_ACTLR_DISFOLD_Pos) /*!< InterruptType ACTLR: DISFOLD Mask */
-
-#define InterruptType_ACTLR_DISDEFWBUF_Pos 1 /*!< InterruptType ACTLR: DISDEFWBUF Position */
-#define InterruptType_ACTLR_DISDEFWBUF_Msk (1ul << InterruptType_ACTLR_DISDEFWBUF_Pos) /*!< InterruptType ACTLR: DISDEFWBUF Mask */
-
-#define InterruptType_ACTLR_DISMCYCINT_Pos 0 /*!< InterruptType ACTLR: DISMCYCINT Position */
-#define InterruptType_ACTLR_DISMCYCINT_Msk (1ul << InterruptType_ACTLR_DISMCYCINT_Pos) /*!< InterruptType ACTLR: DISMCYCINT Mask */
-/*@}*/ /* end of group CMSIS_CM3_InterruptType */
-
-
-#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1)
-/** @addtogroup CMSIS_CM3_MPU CMSIS CM3 MPU
- memory mapped structure for Memory Protection Unit (MPU)
- @{
- */
-typedef struct
-{
- __I uint32_t TYPE; /*!< Offset: 0x00 MPU Type Register */
- __IO uint32_t CTRL; /*!< Offset: 0x04 MPU Control Register */
- __IO uint32_t RNR; /*!< Offset: 0x08 MPU Region RNRber Register */
- __IO uint32_t RBAR; /*!< Offset: 0x0C MPU Region Base Address Register */
- __IO uint32_t RASR; /*!< Offset: 0x10 MPU Region Attribute and Size Register */
- __IO uint32_t RBAR_A1; /*!< Offset: 0x14 MPU Alias 1 Region Base Address Register */
- __IO uint32_t RASR_A1; /*!< Offset: 0x18 MPU Alias 1 Region Attribute and Size Register */
- __IO uint32_t RBAR_A2; /*!< Offset: 0x1C MPU Alias 2 Region Base Address Register */
- __IO uint32_t RASR_A2; /*!< Offset: 0x20 MPU Alias 2 Region Attribute and Size Register */
- __IO uint32_t RBAR_A3; /*!< Offset: 0x24 MPU Alias 3 Region Base Address Register */
- __IO uint32_t RASR_A3; /*!< Offset: 0x28 MPU Alias 3 Region Attribute and Size Register */
-} MPU_Type;
-
-/* MPU Type Register */
-#define MPU_TYPE_IREGION_Pos 16 /*!< MPU TYPE: IREGION Position */
-#define MPU_TYPE_IREGION_Msk (0xFFul << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */
-
-#define MPU_TYPE_DREGION_Pos 8 /*!< MPU TYPE: DREGION Position */
-#define MPU_TYPE_DREGION_Msk (0xFFul << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */
-
-#define MPU_TYPE_SEPARATE_Pos 0 /*!< MPU TYPE: SEPARATE Position */
-#define MPU_TYPE_SEPARATE_Msk (1ul << MPU_TYPE_SEPARATE_Pos) /*!< MPU TYPE: SEPARATE Mask */
-
-/* MPU Control Register */
-#define MPU_CTRL_PRIVDEFENA_Pos 2 /*!< MPU CTRL: PRIVDEFENA Position */
-#define MPU_CTRL_PRIVDEFENA_Msk (1ul << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */
-
-#define MPU_CTRL_HFNMIENA_Pos 1 /*!< MPU CTRL: HFNMIENA Position */
-#define MPU_CTRL_HFNMIENA_Msk (1ul << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */
-
-#define MPU_CTRL_ENABLE_Pos 0 /*!< MPU CTRL: ENABLE Position */
-#define MPU_CTRL_ENABLE_Msk (1ul << MPU_CTRL_ENABLE_Pos) /*!< MPU CTRL: ENABLE Mask */
-
-/* MPU Region Number Register */
-#define MPU_RNR_REGION_Pos 0 /*!< MPU RNR: REGION Position */
-#define MPU_RNR_REGION_Msk (0xFFul << MPU_RNR_REGION_Pos) /*!< MPU RNR: REGION Mask */
-
-/* MPU Region Base Address Register */
-#define MPU_RBAR_ADDR_Pos 5 /*!< MPU RBAR: ADDR Position */
-#define MPU_RBAR_ADDR_Msk (0x7FFFFFFul << MPU_RBAR_ADDR_Pos) /*!< MPU RBAR: ADDR Mask */
-
-#define MPU_RBAR_VALID_Pos 4 /*!< MPU RBAR: VALID Position */
-#define MPU_RBAR_VALID_Msk (1ul << MPU_RBAR_VALID_Pos) /*!< MPU RBAR: VALID Mask */
-
-#define MPU_RBAR_REGION_Pos 0 /*!< MPU RBAR: REGION Position */
-#define MPU_RBAR_REGION_Msk (0xFul << MPU_RBAR_REGION_Pos) /*!< MPU RBAR: REGION Mask */
-
-/* MPU Region Attribute and Size Register */
-#define MPU_RASR_XN_Pos 28 /*!< MPU RASR: XN Position */
-#define MPU_RASR_XN_Msk (1ul << MPU_RASR_XN_Pos) /*!< MPU RASR: XN Mask */
-
-#define MPU_RASR_AP_Pos 24 /*!< MPU RASR: AP Position */
-#define MPU_RASR_AP_Msk (7ul << MPU_RASR_AP_Pos) /*!< MPU RASR: AP Mask */
-
-#define MPU_RASR_TEX_Pos 19 /*!< MPU RASR: TEX Position */
-#define MPU_RASR_TEX_Msk (7ul << MPU_RASR_TEX_Pos) /*!< MPU RASR: TEX Mask */
-
-#define MPU_RASR_S_Pos 18 /*!< MPU RASR: Shareable bit Position */
-#define MPU_RASR_S_Msk (1ul << MPU_RASR_S_Pos) /*!< MPU RASR: Shareable bit Mask */
-
-#define MPU_RASR_C_Pos 17 /*!< MPU RASR: Cacheable bit Position */
-#define MPU_RASR_C_Msk (1ul << MPU_RASR_C_Pos) /*!< MPU RASR: Cacheable bit Mask */
-
-#define MPU_RASR_B_Pos 16 /*!< MPU RASR: Bufferable bit Position */
-#define MPU_RASR_B_Msk (1ul << MPU_RASR_B_Pos) /*!< MPU RASR: Bufferable bit Mask */
-
-#define MPU_RASR_SRD_Pos 8 /*!< MPU RASR: Sub-Region Disable Position */
-#define MPU_RASR_SRD_Msk (0xFFul << MPU_RASR_SRD_Pos) /*!< MPU RASR: Sub-Region Disable Mask */
-
-#define MPU_RASR_SIZE_Pos 1 /*!< MPU RASR: Region Size Field Position */
-#define MPU_RASR_SIZE_Msk (0x1Ful << MPU_RASR_SIZE_Pos) /*!< MPU RASR: Region Size Field Mask */
-
-#define MPU_RASR_ENA_Pos 0 /*!< MPU RASR: Region enable bit Position */
-#define MPU_RASR_ENA_Msk (0x1Ful << MPU_RASR_ENA_Pos) /*!< MPU RASR: Region enable bit Disable Mask */
-
-/*@}*/ /* end of group CMSIS_CM3_MPU */
-#endif
-
-
-/** @addtogroup CMSIS_CM3_CoreDebug CMSIS CM3 Core Debug
- memory mapped structure for Core Debug Register
- @{
- */
-typedef struct
-{
- __IO uint32_t DHCSR; /*!< Offset: 0x00 Debug Halting Control and Status Register */
- __O uint32_t DCRSR; /*!< Offset: 0x04 Debug Core Register Selector Register */
- __IO uint32_t DCRDR; /*!< Offset: 0x08 Debug Core Register Data Register */
- __IO uint32_t DEMCR; /*!< Offset: 0x0C Debug Exception and Monitor Control Register */
-} CoreDebug_Type;
-
-/* Debug Halting Control and Status Register */
-#define CoreDebug_DHCSR_DBGKEY_Pos 16 /*!< CoreDebug DHCSR: DBGKEY Position */
-#define CoreDebug_DHCSR_DBGKEY_Msk (0xFFFFul << CoreDebug_DHCSR_DBGKEY_Pos) /*!< CoreDebug DHCSR: DBGKEY Mask */
-
-#define CoreDebug_DHCSR_S_RESET_ST_Pos 25 /*!< CoreDebug DHCSR: S_RESET_ST Position */
-#define CoreDebug_DHCSR_S_RESET_ST_Msk (1ul << CoreDebug_DHCSR_S_RESET_ST_Pos) /*!< CoreDebug DHCSR: S_RESET_ST Mask */
-
-#define CoreDebug_DHCSR_S_RETIRE_ST_Pos 24 /*!< CoreDebug DHCSR: S_RETIRE_ST Position */
-#define CoreDebug_DHCSR_S_RETIRE_ST_Msk (1ul << CoreDebug_DHCSR_S_RETIRE_ST_Pos) /*!< CoreDebug DHCSR: S_RETIRE_ST Mask */
-
-#define CoreDebug_DHCSR_S_LOCKUP_Pos 19 /*!< CoreDebug DHCSR: S_LOCKUP Position */
-#define CoreDebug_DHCSR_S_LOCKUP_Msk (1ul << CoreDebug_DHCSR_S_LOCKUP_Pos) /*!< CoreDebug DHCSR: S_LOCKUP Mask */
-
-#define CoreDebug_DHCSR_S_SLEEP_Pos 18 /*!< CoreDebug DHCSR: S_SLEEP Position */
-#define CoreDebug_DHCSR_S_SLEEP_Msk (1ul << CoreDebug_DHCSR_S_SLEEP_Pos) /*!< CoreDebug DHCSR: S_SLEEP Mask */
-
-#define CoreDebug_DHCSR_S_HALT_Pos 17 /*!< CoreDebug DHCSR: S_HALT Position */
-#define CoreDebug_DHCSR_S_HALT_Msk (1ul << CoreDebug_DHCSR_S_HALT_Pos) /*!< CoreDebug DHCSR: S_HALT Mask */
-
-#define CoreDebug_DHCSR_S_REGRDY_Pos 16 /*!< CoreDebug DHCSR: S_REGRDY Position */
-#define CoreDebug_DHCSR_S_REGRDY_Msk (1ul << CoreDebug_DHCSR_S_REGRDY_Pos) /*!< CoreDebug DHCSR: S_REGRDY Mask */
-
-#define CoreDebug_DHCSR_C_SNAPSTALL_Pos 5 /*!< CoreDebug DHCSR: C_SNAPSTALL Position */
-#define CoreDebug_DHCSR_C_SNAPSTALL_Msk (1ul << CoreDebug_DHCSR_C_SNAPSTALL_Pos) /*!< CoreDebug DHCSR: C_SNAPSTALL Mask */
-
-#define CoreDebug_DHCSR_C_MASKINTS_Pos 3 /*!< CoreDebug DHCSR: C_MASKINTS Position */
-#define CoreDebug_DHCSR_C_MASKINTS_Msk (1ul << CoreDebug_DHCSR_C_MASKINTS_Pos) /*!< CoreDebug DHCSR: C_MASKINTS Mask */
-
-#define CoreDebug_DHCSR_C_STEP_Pos 2 /*!< CoreDebug DHCSR: C_STEP Position */
-#define CoreDebug_DHCSR_C_STEP_Msk (1ul << CoreDebug_DHCSR_C_STEP_Pos) /*!< CoreDebug DHCSR: C_STEP Mask */
-
-#define CoreDebug_DHCSR_C_HALT_Pos 1 /*!< CoreDebug DHCSR: C_HALT Position */
-#define CoreDebug_DHCSR_C_HALT_Msk (1ul << CoreDebug_DHCSR_C_HALT_Pos) /*!< CoreDebug DHCSR: C_HALT Mask */
-
-#define CoreDebug_DHCSR_C_DEBUGEN_Pos 0 /*!< CoreDebug DHCSR: C_DEBUGEN Position */
-#define CoreDebug_DHCSR_C_DEBUGEN_Msk (1ul << CoreDebug_DHCSR_C_DEBUGEN_Pos) /*!< CoreDebug DHCSR: C_DEBUGEN Mask */
-
-/* Debug Core Register Selector Register */
-#define CoreDebug_DCRSR_REGWnR_Pos 16 /*!< CoreDebug DCRSR: REGWnR Position */
-#define CoreDebug_DCRSR_REGWnR_Msk (1ul << CoreDebug_DCRSR_REGWnR_Pos) /*!< CoreDebug DCRSR: REGWnR Mask */
-
-#define CoreDebug_DCRSR_REGSEL_Pos 0 /*!< CoreDebug DCRSR: REGSEL Position */
-#define CoreDebug_DCRSR_REGSEL_Msk (0x1Ful << CoreDebug_DCRSR_REGSEL_Pos) /*!< CoreDebug DCRSR: REGSEL Mask */
-
-/* Debug Exception and Monitor Control Register */
-#define CoreDebug_DEMCR_TRCENA_Pos 24 /*!< CoreDebug DEMCR: TRCENA Position */
-#define CoreDebug_DEMCR_TRCENA_Msk (1ul << CoreDebug_DEMCR_TRCENA_Pos) /*!< CoreDebug DEMCR: TRCENA Mask */
-
-#define CoreDebug_DEMCR_MON_REQ_Pos 19 /*!< CoreDebug DEMCR: MON_REQ Position */
-#define CoreDebug_DEMCR_MON_REQ_Msk (1ul << CoreDebug_DEMCR_MON_REQ_Pos) /*!< CoreDebug DEMCR: MON_REQ Mask */
-
-#define CoreDebug_DEMCR_MON_STEP_Pos 18 /*!< CoreDebug DEMCR: MON_STEP Position */
-#define CoreDebug_DEMCR_MON_STEP_Msk (1ul << CoreDebug_DEMCR_MON_STEP_Pos) /*!< CoreDebug DEMCR: MON_STEP Mask */
-
-#define CoreDebug_DEMCR_MON_PEND_Pos 17 /*!< CoreDebug DEMCR: MON_PEND Position */
-#define CoreDebug_DEMCR_MON_PEND_Msk (1ul << CoreDebug_DEMCR_MON_PEND_Pos) /*!< CoreDebug DEMCR: MON_PEND Mask */
-
-#define CoreDebug_DEMCR_MON_EN_Pos 16 /*!< CoreDebug DEMCR: MON_EN Position */
-#define CoreDebug_DEMCR_MON_EN_Msk (1ul << CoreDebug_DEMCR_MON_EN_Pos) /*!< CoreDebug DEMCR: MON_EN Mask */
-
-#define CoreDebug_DEMCR_VC_HARDERR_Pos 10 /*!< CoreDebug DEMCR: VC_HARDERR Position */
-#define CoreDebug_DEMCR_VC_HARDERR_Msk (1ul << CoreDebug_DEMCR_VC_HARDERR_Pos) /*!< CoreDebug DEMCR: VC_HARDERR Mask */
-
-#define CoreDebug_DEMCR_VC_INTERR_Pos 9 /*!< CoreDebug DEMCR: VC_INTERR Position */
-#define CoreDebug_DEMCR_VC_INTERR_Msk (1ul << CoreDebug_DEMCR_VC_INTERR_Pos) /*!< CoreDebug DEMCR: VC_INTERR Mask */
-
-#define CoreDebug_DEMCR_VC_BUSERR_Pos 8 /*!< CoreDebug DEMCR: VC_BUSERR Position */
-#define CoreDebug_DEMCR_VC_BUSERR_Msk (1ul << CoreDebug_DEMCR_VC_BUSERR_Pos) /*!< CoreDebug DEMCR: VC_BUSERR Mask */
-
-#define CoreDebug_DEMCR_VC_STATERR_Pos 7 /*!< CoreDebug DEMCR: VC_STATERR Position */
-#define CoreDebug_DEMCR_VC_STATERR_Msk (1ul << CoreDebug_DEMCR_VC_STATERR_Pos) /*!< CoreDebug DEMCR: VC_STATERR Mask */
-
-#define CoreDebug_DEMCR_VC_CHKERR_Pos 6 /*!< CoreDebug DEMCR: VC_CHKERR Position */
-#define CoreDebug_DEMCR_VC_CHKERR_Msk (1ul << CoreDebug_DEMCR_VC_CHKERR_Pos) /*!< CoreDebug DEMCR: VC_CHKERR Mask */
-
-#define CoreDebug_DEMCR_VC_NOCPERR_Pos 5 /*!< CoreDebug DEMCR: VC_NOCPERR Position */
-#define CoreDebug_DEMCR_VC_NOCPERR_Msk (1ul << CoreDebug_DEMCR_VC_NOCPERR_Pos) /*!< CoreDebug DEMCR: VC_NOCPERR Mask */
-
-#define CoreDebug_DEMCR_VC_MMERR_Pos 4 /*!< CoreDebug DEMCR: VC_MMERR Position */
-#define CoreDebug_DEMCR_VC_MMERR_Msk (1ul << CoreDebug_DEMCR_VC_MMERR_Pos) /*!< CoreDebug DEMCR: VC_MMERR Mask */
-
-#define CoreDebug_DEMCR_VC_CORERESET_Pos 0 /*!< CoreDebug DEMCR: VC_CORERESET Position */
-#define CoreDebug_DEMCR_VC_CORERESET_Msk (1ul << CoreDebug_DEMCR_VC_CORERESET_Pos) /*!< CoreDebug DEMCR: VC_CORERESET Mask */
-/*@}*/ /* end of group CMSIS_CM3_CoreDebug */
-
-
-/* Memory mapping of Cortex-M3 Hardware */
-#define SCS_BASE (0xE000E000) /*!< System Control Space Base Address */
-#define ITM_BASE (0xE0000000) /*!< ITM Base Address */
-#define CoreDebug_BASE (0xE000EDF0) /*!< Core Debug Base Address */
-#define SysTick_BASE (SCS_BASE + 0x0010) /*!< SysTick Base Address */
-#define NVIC_BASE (SCS_BASE + 0x0100) /*!< NVIC Base Address */
-#define SCB_BASE (SCS_BASE + 0x0D00) /*!< System Control Block Base Address */
-
-#define InterruptType ((InterruptType_Type *) SCS_BASE) /*!< Interrupt Type Register */
-#define SCB ((SCB_Type *) SCB_BASE) /*!< SCB configuration struct */
-#define SysTick ((SysTick_Type *) SysTick_BASE) /*!< SysTick configuration struct */
-#define NVIC ((NVIC_Type *) NVIC_BASE) /*!< NVIC configuration struct */
-#define ITM ((ITM_Type *) ITM_BASE) /*!< ITM configuration struct */
-#define CoreDebug ((CoreDebug_Type *) CoreDebug_BASE) /*!< Core Debug configuration struct */
-
-#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1)
- #define MPU_BASE (SCS_BASE + 0x0D90) /*!< Memory Protection Unit */
- #define MPU ((MPU_Type*) MPU_BASE) /*!< Memory Protection Unit */
-#endif
-
-/*@}*/ /* end of group CMSIS_CM3_core_register */
-
-
-/*******************************************************************************
- * Hardware Abstraction Layer
- ******************************************************************************/
-
-#if defined ( __CC_ARM )
- #define __ASM __asm /*!< asm keyword for ARM Compiler */
- #define __INLINE __inline /*!< inline keyword for ARM Compiler */
-
-#elif defined ( __ICCARM__ )
- #define __ASM __asm /*!< asm keyword for IAR Compiler */
- #define __INLINE inline /*!< inline keyword for IAR Compiler. Only avaiable in High optimization mode! */
-
-#elif defined ( __GNUC__ )
- #define __ASM __asm /*!< asm keyword for GNU Compiler */
- #define __INLINE inline /*!< inline keyword for GNU Compiler */
-
-#elif defined ( __TASKING__ )
- #define __ASM __asm /*!< asm keyword for TASKING Compiler */
- #define __INLINE inline /*!< inline keyword for TASKING Compiler */
-
-#endif
-
-
-/* ################### Compiler specific Intrinsics ########################### */
-
-#if defined ( __CC_ARM ) /*------------------RealView Compiler -----------------*/
-/* ARM armcc specific functions */
-
-#define __enable_fault_irq __enable_fiq
-#define __disable_fault_irq __disable_fiq
-
-#define __NOP __nop
-#define __WFI __wfi
-#define __WFE __wfe
-#define __SEV __sev
-#define __ISB() __isb(0)
-#define __DSB() __dsb(0)
-#define __DMB() __dmb(0)
-#define __REV __rev
-#define __RBIT __rbit
-#define __LDREXB(ptr) ((unsigned char ) __ldrex(ptr))
-#define __LDREXH(ptr) ((unsigned short) __ldrex(ptr))
-#define __LDREXW(ptr) ((unsigned int ) __ldrex(ptr))
-#define __STREXB(value, ptr) __strex(value, ptr)
-#define __STREXH(value, ptr) __strex(value, ptr)
-#define __STREXW(value, ptr) __strex(value, ptr)
-
-
-/* intrinsic unsigned long long __ldrexd(volatile void *ptr) */
-/* intrinsic int __strexd(unsigned long long val, volatile void *ptr) */
-/* intrinsic void __enable_irq(); */
-/* intrinsic void __disable_irq(); */
-
-
-/**
- * @brief Return the Process Stack Pointer
- *
- * @return ProcessStackPointer
- *
- * Return the actual process stack pointer
- */
-extern uint32_t __get_PSP(void);
-
-/**
- * @brief Set the Process Stack Pointer
- *
- * @param topOfProcStack Process Stack Pointer
- *
- * Assign the value ProcessStackPointer to the MSP
- * (process stack pointer) Cortex processor register
- */
-extern void __set_PSP(uint32_t topOfProcStack);
-
-/**
- * @brief Return the Main Stack Pointer
- *
- * @return Main Stack Pointer
- *
- * Return the current value of the MSP (main stack pointer)
- * Cortex processor register
- */
-extern uint32_t __get_MSP(void);
-
-/**
- * @brief Set the Main Stack Pointer
- *
- * @param topOfMainStack Main Stack Pointer
- *
- * Assign the value mainStackPointer to the MSP
- * (main stack pointer) Cortex processor register
- */
-extern void __set_MSP(uint32_t topOfMainStack);
-
-/**
- * @brief Reverse byte order in unsigned short value
- *
- * @param value value to reverse
- * @return reversed value
- *
- * Reverse byte order in unsigned short value
- */
-extern uint32_t __REV16(uint16_t value);
-
-/**
- * @brief Reverse byte order in signed short value with sign extension to integer
- *
- * @param value value to reverse
- * @return reversed value
- *
- * Reverse byte order in signed short value with sign extension to integer
- */
-extern int32_t __REVSH(int16_t value);
-
-
-#if (__ARMCC_VERSION < 400000)
-
-/**
- * @brief Remove the exclusive lock created by ldrex
- *
- * Removes the exclusive lock which is created by ldrex.
- */
-extern void __CLREX(void);
-
-/**
- * @brief Return the Base Priority value
- *
- * @return BasePriority
- *
- * Return the content of the base priority register
- */
-extern uint32_t __get_BASEPRI(void);
-
-/**
- * @brief Set the Base Priority value
- *
- * @param basePri BasePriority
- *
- * Set the base priority register
- */
-extern void __set_BASEPRI(uint32_t basePri);
-
-/**
- * @brief Return the Priority Mask value
- *
- * @return PriMask
- *
- * Return state of the priority mask bit from the priority mask register
- */
-extern uint32_t __get_PRIMASK(void);
-
-/**
- * @brief Set the Priority Mask value
- *
- * @param priMask PriMask
- *
- * Set the priority mask bit in the priority mask register
- */
-extern void __set_PRIMASK(uint32_t priMask);
-
-/**
- * @brief Return the Fault Mask value
- *
- * @return FaultMask
- *
- * Return the content of the fault mask register
- */
-extern uint32_t __get_FAULTMASK(void);
-
-/**
- * @brief Set the Fault Mask value
- *
- * @param faultMask faultMask value
- *
- * Set the fault mask register
- */
-extern void __set_FAULTMASK(uint32_t faultMask);
-
-/**
- * @brief Return the Control Register value
- *
- * @return Control value
- *
- * Return the content of the control register
- */
-extern uint32_t __get_CONTROL(void);
-
-/**
- * @brief Set the Control Register value
- *
- * @param control Control value
- *
- * Set the control register
- */
-extern void __set_CONTROL(uint32_t control);
-
-#else /* (__ARMCC_VERSION >= 400000) */
-
-/**
- * @brief Remove the exclusive lock created by ldrex
- *
- * Removes the exclusive lock which is created by ldrex.
- */
-#define __CLREX __clrex
-
-/**
- * @brief Return the Base Priority value
- *
- * @return BasePriority
- *
- * Return the content of the base priority register
- */
-static __INLINE uint32_t __get_BASEPRI(void)
-{
- register uint32_t __regBasePri __ASM("basepri");
- return(__regBasePri);
-}
-
-/**
- * @brief Set the Base Priority value
- *
- * @param basePri BasePriority
- *
- * Set the base priority register
- */
-static __INLINE void __set_BASEPRI(uint32_t basePri)
-{
- register uint32_t __regBasePri __ASM("basepri");
- __regBasePri = (basePri & 0xff);
-}
-
-/**
- * @brief Return the Priority Mask value
- *
- * @return PriMask
- *
- * Return state of the priority mask bit from the priority mask register
- */
-static __INLINE uint32_t __get_PRIMASK(void)
-{
- register uint32_t __regPriMask __ASM("primask");
- return(__regPriMask);
-}
-
-/**
- * @brief Set the Priority Mask value
- *
- * @param priMask PriMask
- *
- * Set the priority mask bit in the priority mask register
- */
-static __INLINE void __set_PRIMASK(uint32_t priMask)
-{
- register uint32_t __regPriMask __ASM("primask");
- __regPriMask = (priMask);
-}
-
-/**
- * @brief Return the Fault Mask value
- *
- * @return FaultMask
- *
- * Return the content of the fault mask register
- */
-static __INLINE uint32_t __get_FAULTMASK(void)
-{
- register uint32_t __regFaultMask __ASM("faultmask");
- return(__regFaultMask);
-}
-
-/**
- * @brief Set the Fault Mask value
- *
- * @param faultMask faultMask value
- *
- * Set the fault mask register
- */
-static __INLINE void __set_FAULTMASK(uint32_t faultMask)
-{
- register uint32_t __regFaultMask __ASM("faultmask");
- __regFaultMask = (faultMask & 1);
-}
-
-/**
- * @brief Return the Control Register value
- *
- * @return Control value
- *
- * Return the content of the control register
- */
-static __INLINE uint32_t __get_CONTROL(void)
-{
- register uint32_t __regControl __ASM("control");
- return(__regControl);
-}
-
-/**
- * @brief Set the Control Register value
- *
- * @param control Control value
- *
- * Set the control register
- */
-static __INLINE void __set_CONTROL(uint32_t control)
-{
- register uint32_t __regControl __ASM("control");
- __regControl = control;
-}
-
-#endif /* __ARMCC_VERSION */
-
-
-
-#elif (defined (__ICCARM__)) /*------------------ ICC Compiler -------------------*/
-/* IAR iccarm specific functions */
-
-#define __enable_irq __enable_interrupt /*!< global Interrupt enable */
-#define __disable_irq __disable_interrupt /*!< global Interrupt disable */
-
-static __INLINE void __enable_fault_irq() { __ASM ("cpsie f"); }
-static __INLINE void __disable_fault_irq() { __ASM ("cpsid f"); }
-
-#define __NOP __no_operation /*!< no operation intrinsic in IAR Compiler */
-static __INLINE void __WFI() { __ASM ("wfi"); }
-static __INLINE void __WFE() { __ASM ("wfe"); }
-static __INLINE void __SEV() { __ASM ("sev"); }
-static __INLINE void __CLREX() { __ASM ("clrex"); }
-
-/* intrinsic void __ISB(void) */
-/* intrinsic void __DSB(void) */
-/* intrinsic void __DMB(void) */
-/* intrinsic void __set_PRIMASK(); */
-/* intrinsic void __get_PRIMASK(); */
-/* intrinsic void __set_FAULTMASK(); */
-/* intrinsic void __get_FAULTMASK(); */
-/* intrinsic uint32_t __REV(uint32_t value); */
-/* intrinsic uint32_t __REVSH(uint32_t value); */
-/* intrinsic unsigned long __STREX(unsigned long, unsigned long); */
-/* intrinsic unsigned long __LDREX(unsigned long *); */
-
-
-/**
- * @brief Return the Process Stack Pointer
- *
- * @return ProcessStackPointer
- *
- * Return the actual process stack pointer
- */
-//extern uint32_t __get_PSP(void);
-
-/**
- * @brief Set the Process Stack Pointer
- *
- * @param topOfProcStack Process Stack Pointer
- *
- * Assign the value ProcessStackPointer to the MSP
- * (process stack pointer) Cortex processor register
- */
-//extern void __set_PSP(uint32_t topOfProcStack);
-
-/**
- * @brief Return the Main Stack Pointer
- *
- * @return Main Stack Pointer
- *
- * Return the current value of the MSP (main stack pointer)
- * Cortex processor register
- */
-//extern uint32_t __get_MSP(void);
-
-/**
- * @brief Set the Main Stack Pointer
- *
- * @param topOfMainStack Main Stack Pointer
- *
- * Assign the value mainStackPointer to the MSP
- * (main stack pointer) Cortex processor register
- */
-//extern void __set_MSP(uint32_t topOfMainStack);
-
-/**
- * @brief Reverse byte order in unsigned short value
- *
- * @param value value to reverse
- * @return reversed value
- *
- * Reverse byte order in unsigned short value
- */
-//extern uint32_t __REV16(uint16_t value);
-
-/**
- * @brief Reverse bit order of value
- *
- * @param value value to reverse
- * @return reversed value
- *
- * Reverse bit order of value
- */
-//extern uint32_t __RBIT(uint32_t value);
-
-/**
- * @brief LDR Exclusive (8 bit)
- *
- * @param *addr address pointer
- * @return value of (*address)
- *
- * Exclusive LDR command for 8 bit values)
- */
-extern uint8_t __LDREXB(uint8_t *addr);
-
-/**
- * @brief LDR Exclusive (16 bit)
- *
- * @param *addr address pointer
- * @return value of (*address)
- *
- * Exclusive LDR command for 16 bit values
- */
-extern uint16_t __LDREXH(uint16_t *addr);
-
-/**
- * @brief LDR Exclusive (32 bit)
- *
- * @param *addr address pointer
- * @return value of (*address)
- *
- * Exclusive LDR command for 32 bit values
- */
-extern uint32_t __LDREXW(uint32_t *addr);
-
-/**
- * @brief STR Exclusive (8 bit)
- *
- * @param value value to store
- * @param *addr address pointer
- * @return successful / failed
- *
- * Exclusive STR command for 8 bit values
- */
-//extern uint32_t __STREXB(uint8_t value, uint8_t *addr);
-
-/**
- * @brief STR Exclusive (16 bit)
- *
- * @param value value to store
- * @param *addr address pointer
- * @return successful / failed
- *
- * Exclusive STR command for 16 bit values
- */
-//extern uint32_t __STREXH(uint16_t value, uint16_t *addr);
-
-/**
- * @brief STR Exclusive (32 bit)
- *
- * @param value value to store
- * @param *addr address pointer
- * @return successful / failed
- *
- * Exclusive STR command for 32 bit values
- */
-extern uint32_t __STREXW(uint32_t value, uint32_t *addr);
-
-
-
-#elif (defined (__GNUC__)) /*------------------ GNU Compiler ---------------------*/
-/* GNU gcc specific functions */
-
-static __INLINE void __enable_irq(void) { __ASM volatile ("cpsie i"); }
-static __INLINE void __disable_irq(void) { __ASM volatile ("cpsid i"); }
-
-static __INLINE void __enable_fault_irq(void) { __ASM volatile ("cpsie f"); }
-static __INLINE void __disable_fault_irq(void) { __ASM volatile ("cpsid f"); }
-
-static __INLINE void __NOP(void) { __ASM volatile ("nop"); }
-static __INLINE void __WFI(void) { __ASM volatile ("wfi"); }
-static __INLINE void __WFE(void) { __ASM volatile ("wfe"); }
-static __INLINE void __SEV(void) { __ASM volatile ("sev"); }
-static __INLINE void __ISB(void) { __ASM volatile ("isb"); }
-static __INLINE void __DSB(void) { __ASM volatile ("dsb"); }
-static __INLINE void __DMB(void) { __ASM volatile ("dmb"); }
-static __INLINE void __CLREX(void) { __ASM volatile ("clrex"); }
-
-
-/**
- * @brief Return the Process Stack Pointer
- *
- * @return ProcessStackPointer
- *
- * Return the actual process stack pointer
- */
-extern uint32_t __get_PSP(void);
-
-/**
- * @brief Set the Process Stack Pointer
- *
- * @param topOfProcStack Process Stack Pointer
- *
- * Assign the value ProcessStackPointer to the MSP
- * (process stack pointer) Cortex processor register
- */
-extern void __set_PSP(uint32_t topOfProcStack);
-
-/**
- * @brief Return the Main Stack Pointer
- *
- * @return Main Stack Pointer
- *
- * Return the current value of the MSP (main stack pointer)
- * Cortex processor register
- */
-extern uint32_t __get_MSP(void);
-
-/**
- * @brief Set the Main Stack Pointer
- *
- * @param topOfMainStack Main Stack Pointer
- *
- * Assign the value mainStackPointer to the MSP
- * (main stack pointer) Cortex processor register
- */
-extern void __set_MSP(uint32_t topOfMainStack);
-
-/**
- * @brief Return the Base Priority value
- *
- * @return BasePriority
- *
- * Return the content of the base priority register
- */
-extern uint32_t __get_BASEPRI(void);
-
-/**
- * @brief Set the Base Priority value
- *
- * @param basePri BasePriority
- *
- * Set the base priority register
- */
-extern void __set_BASEPRI(uint32_t basePri);
-
-/**
- * @brief Return the Priority Mask value
- *
- * @return PriMask
- *
- * Return state of the priority mask bit from the priority mask register
- */
-extern uint32_t __get_PRIMASK(void);
-
-/**
- * @brief Set the Priority Mask value
- *
- * @param priMask PriMask
- *
- * Set the priority mask bit in the priority mask register
- */
-extern void __set_PRIMASK(uint32_t priMask);
-
-/**
- * @brief Return the Fault Mask value
- *
- * @return FaultMask
- *
- * Return the content of the fault mask register
- */
-extern uint32_t __get_FAULTMASK(void);
-
-/**
- * @brief Set the Fault Mask value
- *
- * @param faultMask faultMask value
- *
- * Set the fault mask register
- */
-extern void __set_FAULTMASK(uint32_t faultMask);
-
-/**
- * @brief Return the Control Register value
-*
-* @return Control value
- *
- * Return the content of the control register
- */
-extern uint32_t __get_CONTROL(void);
-
-/**
- * @brief Set the Control Register value
- *
- * @param control Control value
- *
- * Set the control register
- */
-extern void __set_CONTROL(uint32_t control);
-
-/**
- * @brief Reverse byte order in integer value
- *
- * @param value value to reverse
- * @return reversed value
- *
- * Reverse byte order in integer value
- */
-extern uint32_t __REV(uint32_t value);
-
-/**
- * @brief Reverse byte order in unsigned short value
- *
- * @param value value to reverse
- * @return reversed value
- *
- * Reverse byte order in unsigned short value
- */
-extern uint32_t __REV16(uint16_t value);
-
-/**
- * @brief Reverse byte order in signed short value with sign extension to integer
- *
- * @param value value to reverse
- * @return reversed value
- *
- * Reverse byte order in signed short value with sign extension to integer
- */
-extern int32_t __REVSH(int16_t value);
-
-/**
- * @brief Reverse bit order of value
- *
- * @param value value to reverse
- * @return reversed value
- *
- * Reverse bit order of value
- */
-extern uint32_t __RBIT(uint32_t value);
-
-/**
- * @brief LDR Exclusive (8 bit)
- *
- * @param *addr address pointer
- * @return value of (*address)
- *
- * Exclusive LDR command for 8 bit value
- */
-extern uint8_t __LDREXB(uint8_t *addr);
-
-/**
- * @brief LDR Exclusive (16 bit)
- *
- * @param *addr address pointer
- * @return value of (*address)
- *
- * Exclusive LDR command for 16 bit values
- */
-extern uint16_t __LDREXH(uint16_t *addr);
-
-/**
- * @brief LDR Exclusive (32 bit)
- *
- * @param *addr address pointer
- * @return value of (*address)
- *
- * Exclusive LDR command for 32 bit values
- */
-extern uint32_t __LDREXW(uint32_t *addr);
-
-/**
- * @brief STR Exclusive (8 bit)
- *
- * @param value value to store
- * @param *addr address pointer
- * @return successful / failed
- *
- * Exclusive STR command for 8 bit values
- */
-extern uint32_t __STREXB(uint8_t value, uint8_t *addr);
-
-/**
- * @brief STR Exclusive (16 bit)
- *
- * @param value value to store
- * @param *addr address pointer
- * @return successful / failed
- *
- * Exclusive STR command for 16 bit values
- */
-extern uint32_t __STREXH(uint16_t value, uint16_t *addr);
-
-/**
- * @brief STR Exclusive (32 bit)
- *
- * @param value value to store
- * @param *addr address pointer
- * @return successful / failed
- *
- * Exclusive STR command for 32 bit values
- */
-extern uint32_t __STREXW(uint32_t value, uint32_t *addr);
-
-
-#elif (defined (__TASKING__)) /*------------------ TASKING Compiler ---------------------*/
-/* TASKING carm specific functions */
-
-/*
- * The CMSIS functions have been implemented as intrinsics in the compiler.
- * Please use "carm -?i" to get an up to date list of all instrinsics,
- * Including the CMSIS ones.
- */
-
-#endif
-
-
-/** @addtogroup CMSIS_CM3_Core_FunctionInterface CMSIS CM3 Core Function Interface
- Core Function Interface containing:
- - Core NVIC Functions
- - Core SysTick Functions
- - Core Reset Functions
-*/
-/*@{*/
-
-/* ########################## NVIC functions #################################### */
-
-/**
- * @brief Set the Priority Grouping in NVIC Interrupt Controller
- *
- * @param PriorityGroup is priority grouping field
- *
- * Set the priority grouping field using the required unlock sequence.
- * The parameter priority_grouping is assigned to the field
- * SCB->AIRCR [10:8] PRIGROUP field. Only values from 0..7 are used.
- * In case of a conflict between priority grouping and available
- * priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set.
- */
-static __INLINE void NVIC_SetPriorityGrouping(uint32_t PriorityGroup)
-{
- uint32_t reg_value;
- uint32_t PriorityGroupTmp = (PriorityGroup & 0x07); /* only values 0..7 are used */
-
- reg_value = SCB->AIRCR; /* read old register configuration */
- reg_value &= ~(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk); /* clear bits to change */
- reg_value = (reg_value |
- (0x5FA << SCB_AIRCR_VECTKEY_Pos) |
- (PriorityGroupTmp << 8)); /* Insert write key and priorty group */
- SCB->AIRCR = reg_value;
-}
-
-/**
- * @brief Get the Priority Grouping from NVIC Interrupt Controller
- *
- * @return priority grouping field
- *
- * Get the priority grouping from NVIC Interrupt Controller.
- * priority grouping is SCB->AIRCR [10:8] PRIGROUP field.
- */
-static __INLINE uint32_t NVIC_GetPriorityGrouping(void)
-{
- return ((SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos); /* read priority grouping field */
-}
-
-/**
- * @brief Enable Interrupt in NVIC Interrupt Controller
- *
- * @param IRQn The positive number of the external interrupt to enable
- *
- * Enable a device specific interupt in the NVIC interrupt controller.
- * The interrupt number cannot be a negative value.
- */
-static __INLINE void NVIC_EnableIRQ(IRQn_Type IRQn)
-{
- NVIC->ISER[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* enable interrupt */
-}
-
-/**
- * @brief Disable the interrupt line for external interrupt specified
- *
- * @param IRQn The positive number of the external interrupt to disable
- *
- * Disable a device specific interupt in the NVIC interrupt controller.
- * The interrupt number cannot be a negative value.
- */
-static __INLINE void NVIC_DisableIRQ(IRQn_Type IRQn)
-{
- NVIC->ICER[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* disable interrupt */
-}
-
-/**
- * @brief Read the interrupt pending bit for a device specific interrupt source
- *
- * @param IRQn The number of the device specifc interrupt
- * @return 1 = interrupt pending, 0 = interrupt not pending
- *
- * Read the pending register in NVIC and return 1 if its status is pending,
- * otherwise it returns 0
- */
-static __INLINE uint32_t NVIC_GetPendingIRQ(IRQn_Type IRQn)
-{
- return((uint32_t) ((NVIC->ISPR[(uint32_t)(IRQn) >> 5] & (1 << ((uint32_t)(IRQn) & 0x1F)))?1:0)); /* Return 1 if pending else 0 */
-}
-
-/**
- * @brief Set the pending bit for an external interrupt
- *
- * @param IRQn The number of the interrupt for set pending
- *
- * Set the pending bit for the specified interrupt.
- * The interrupt number cannot be a negative value.
- */
-static __INLINE void NVIC_SetPendingIRQ(IRQn_Type IRQn)
-{
- NVIC->ISPR[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* set interrupt pending */
-}
-
-/**
- * @brief Clear the pending bit for an external interrupt
- *
- * @param IRQn The number of the interrupt for clear pending
- *
- * Clear the pending bit for the specified interrupt.
- * The interrupt number cannot be a negative value.
- */
-static __INLINE void NVIC_ClearPendingIRQ(IRQn_Type IRQn)
-{
- NVIC->ICPR[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* Clear pending interrupt */
-}
-
-/**
- * @brief Read the active bit for an external interrupt
- *
- * @param IRQn The number of the interrupt for read active bit
- * @return 1 = interrupt active, 0 = interrupt not active
- *
- * Read the active register in NVIC and returns 1 if its status is active,
- * otherwise it returns 0.
- */
-static __INLINE uint32_t NVIC_GetActive(IRQn_Type IRQn)
-{
- return((uint32_t)((NVIC->IABR[(uint32_t)(IRQn) >> 5] & (1 << ((uint32_t)(IRQn) & 0x1F)))?1:0)); /* Return 1 if active else 0 */
-}
-
-/**
- * @brief Set the priority for an interrupt
- *
- * @param IRQn The number of the interrupt for set priority
- * @param priority The priority to set
- *
- * Set the priority for the specified interrupt. The interrupt
- * number can be positive to specify an external (device specific)
- * interrupt, or negative to specify an internal (core) interrupt.
- *
- * Note: The priority cannot be set for every core interrupt.
- */
-static __INLINE void NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority)
-{
- if(IRQn < 0) {
- SCB->SHP[((uint32_t)(IRQn) & 0xF)-4] = ((priority << (8 - __NVIC_PRIO_BITS)) & 0xff); } /* set Priority for Cortex-M3 System Interrupts */
- else {
- NVIC->IP[(uint32_t)(IRQn)] = ((priority << (8 - __NVIC_PRIO_BITS)) & 0xff); } /* set Priority for device specific Interrupts */
-}
-
-/**
- * @brief Read the priority for an interrupt
- *
- * @param IRQn The number of the interrupt for get priority
- * @return The priority for the interrupt
- *
- * Read the priority for the specified interrupt. The interrupt
- * number can be positive to specify an external (device specific)
- * interrupt, or negative to specify an internal (core) interrupt.
- *
- * The returned priority value is automatically aligned to the implemented
- * priority bits of the microcontroller.
- *
- * Note: The priority cannot be set for every core interrupt.
- */
-static __INLINE uint32_t NVIC_GetPriority(IRQn_Type IRQn)
-{
-
- if(IRQn < 0) {
- return((uint32_t)(SCB->SHP[((uint32_t)(IRQn) & 0xF)-4] >> (8 - __NVIC_PRIO_BITS))); } /* get priority for Cortex-M3 system interrupts */
- else {
- return((uint32_t)(NVIC->IP[(uint32_t)(IRQn)] >> (8 - __NVIC_PRIO_BITS))); } /* get priority for device specific interrupts */
-}
-
-
-/**
- * @brief Encode the priority for an interrupt
- *
- * @param PriorityGroup The used priority group
- * @param PreemptPriority The preemptive priority value (starting from 0)
- * @param SubPriority The sub priority value (starting from 0)
- * @return The encoded priority for the interrupt
- *
- * Encode the priority for an interrupt with the given priority group,
- * preemptive priority value and sub priority value.
- * In case of a conflict between priority grouping and available
- * priority bits (__NVIC_PRIO_BITS) the samllest possible priority group is set.
- *
- * The returned priority value can be used for NVIC_SetPriority(...) function
- */
-static __INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority)
-{
- uint32_t PriorityGroupTmp = (PriorityGroup & 0x07); /* only values 0..7 are used */
- uint32_t PreemptPriorityBits;
- uint32_t SubPriorityBits;
-
- PreemptPriorityBits = ((7 - PriorityGroupTmp) > __NVIC_PRIO_BITS) ? __NVIC_PRIO_BITS : 7 - PriorityGroupTmp;
- SubPriorityBits = ((PriorityGroupTmp + __NVIC_PRIO_BITS) < 7) ? 0 : PriorityGroupTmp - 7 + __NVIC_PRIO_BITS;
-
- return (
- ((PreemptPriority & ((1 << (PreemptPriorityBits)) - 1)) << SubPriorityBits) |
- ((SubPriority & ((1 << (SubPriorityBits )) - 1)))
- );
-}
-
-
-/**
- * @brief Decode the priority of an interrupt
- *
- * @param Priority The priority for the interrupt
- * @param PriorityGroup The used priority group
- * @param pPreemptPriority The preemptive priority value (starting from 0)
- * @param pSubPriority The sub priority value (starting from 0)
- *
- * Decode an interrupt priority value with the given priority group to
- * preemptive priority value and sub priority value.
- * In case of a conflict between priority grouping and available
- * priority bits (__NVIC_PRIO_BITS) the samllest possible priority group is set.
- *
- * The priority value can be retrieved with NVIC_GetPriority(...) function
- */
-static __INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* pPreemptPriority, uint32_t* pSubPriority)
-{
- uint32_t PriorityGroupTmp = (PriorityGroup & 0x07); /* only values 0..7 are used */
- uint32_t PreemptPriorityBits;
- uint32_t SubPriorityBits;
-
- PreemptPriorityBits = ((7 - PriorityGroupTmp) > __NVIC_PRIO_BITS) ? __NVIC_PRIO_BITS : 7 - PriorityGroupTmp;
- SubPriorityBits = ((PriorityGroupTmp + __NVIC_PRIO_BITS) < 7) ? 0 : PriorityGroupTmp - 7 + __NVIC_PRIO_BITS;
-
- *pPreemptPriority = (Priority >> SubPriorityBits) & ((1 << (PreemptPriorityBits)) - 1);
- *pSubPriority = (Priority ) & ((1 << (SubPriorityBits )) - 1);
-}
-
-
-
-/* ################################## SysTick function ############################################ */
-
-#if (!defined (__Vendor_SysTickConfig)) || (__Vendor_SysTickConfig == 0)
-
-/**
- * @brief Initialize and start the SysTick counter and its interrupt.
- *
- * @param ticks number of ticks between two interrupts
- * @return 1 = failed, 0 = successful
- *
- * Initialise the system tick timer and its interrupt and start the
- * system tick timer / counter in free running mode to generate
- * periodical interrupts.
- */
-static __INLINE uint32_t SysTick_Config(uint32_t ticks)
-{
- if (ticks > SysTick_LOAD_RELOAD_Msk) return (1); /* Reload value impossible */
-
- SysTick->LOAD = (ticks & SysTick_LOAD_RELOAD_Msk) - 1; /* set reload register */
- NVIC_SetPriority (SysTick_IRQn, (1<<__NVIC_PRIO_BITS) - 1); /* set Priority for Cortex-M0 System Interrupts */
- SysTick->VAL = 0; /* Load the SysTick Counter Value */
- SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk |
- SysTick_CTRL_TICKINT_Msk |
- SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */
- return (0); /* Function successful */
-}
-
-#endif
-
-
-
-
-/* ################################## Reset function ############################################ */
-
-/**
- * @brief Initiate a system reset request.
- *
- * Initiate a system reset request to reset the MCU
- */
-static __INLINE void NVIC_SystemReset(void)
-{
- SCB->AIRCR = ((0x5FA << SCB_AIRCR_VECTKEY_Pos) |
- (SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) |
- SCB_AIRCR_SYSRESETREQ_Msk); /* Keep priority group unchanged */
- __DSB(); /* Ensure completion of memory access */
- while(1); /* wait until reset */
-}
-
-/*@}*/ /* end of group CMSIS_CM3_Core_FunctionInterface */
-
-
-
-/* ##################################### Debug In/Output function ########################################### */
-
-/** @addtogroup CMSIS_CM3_CoreDebugInterface CMSIS CM3 Core Debug Interface
- Core Debug Interface containing:
- - Core Debug Receive / Transmit Functions
- - Core Debug Defines
- - Core Debug Variables
-*/
-/*@{*/
-
-extern volatile int ITM_RxBuffer; /*!< variable to receive characters */
-#define ITM_RXBUFFER_EMPTY 0x5AA55AA5 /*!< value identifying ITM_RxBuffer is ready for next character */
-
-
-/**
- * @brief Outputs a character via the ITM channel 0
- *
- * @param ch character to output
- * @return character to output
- *
- * The function outputs a character via the ITM channel 0.
- * The function returns when no debugger is connected that has booked the output.
- * It is blocking when a debugger is connected, but the previous character send is not transmitted.
- */
-static __INLINE uint32_t ITM_SendChar (uint32_t ch)
-{
- if ((CoreDebug->DEMCR & CoreDebug_DEMCR_TRCENA_Msk) && /* Trace enabled */
- (ITM->TCR & ITM_TCR_ITMENA_Msk) && /* ITM enabled */
- (ITM->TER & (1ul << 0) ) ) /* ITM Port #0 enabled */
- {
- while (ITM->PORT[0].u32 == 0);
- ITM->PORT[0].u8 = (uint8_t) ch;
- }
- return (ch);
-}
-
-
-/**
- * @brief Inputs a character via variable ITM_RxBuffer
- *
- * @return received character, -1 = no character received
- *
- * The function inputs a character via variable ITM_RxBuffer.
- * The function returns when no debugger is connected that has booked the output.
- * It is blocking when a debugger is connected, but the previous character send is not transmitted.
- */
-static __INLINE int ITM_ReceiveChar (void) {
- int ch = -1; /* no character available */
-
- if (ITM_RxBuffer != ITM_RXBUFFER_EMPTY) {
- ch = ITM_RxBuffer;
- ITM_RxBuffer = ITM_RXBUFFER_EMPTY; /* ready for next character */
- }
-
- return (ch);
-}
-
-
-/**
- * @brief Check if a character via variable ITM_RxBuffer is available
- *
- * @return 1 = character available, 0 = no character available
- *
- * The function checks variable ITM_RxBuffer whether a character is available or not.
- * The function returns '1' if a character is available and '0' if no character is available.
- */
-static __INLINE int ITM_CheckChar (void) {
-
- if (ITM_RxBuffer == ITM_RXBUFFER_EMPTY) {
- return (0); /* no character available */
- } else {
- return (1); /* character available */
- }
-}
-
-/*@}*/ /* end of group CMSIS_CM3_core_DebugInterface */
-
-
-#ifdef __cplusplus
-}
-#endif
-
-/*@}*/ /* end of group CMSIS_CM3_core_definitions */
-
-#endif /* __CM3_CORE_H__ */
-
-/*lint -restore */
diff --git a/os/hal/platforms/STM32/platform.mk b/os/hal/platforms/STM32/platform.mk deleted file mode 100644 index 02f090e5e..000000000 --- a/os/hal/platforms/STM32/platform.mk +++ /dev/null @@ -1,17 +0,0 @@ -# List of all the STM32 platform files.
-PLATFORMSRC = ${CHIBIOS}/os/hal/platforms/STM32/hal_lld.c \
- ${CHIBIOS}/os/hal/platforms/STM32/adc_lld.c \
- ${CHIBIOS}/os/hal/platforms/STM32/can_lld.c \
- ${CHIBIOS}/os/hal/platforms/STM32/gpt_lld.c \
- ${CHIBIOS}/os/hal/platforms/STM32/icu_lld.c \
- ${CHIBIOS}/os/hal/platforms/STM32/pal_lld.c \
- ${CHIBIOS}/os/hal/platforms/STM32/pwm_lld.c \
- ${CHIBIOS}/os/hal/platforms/STM32/sdc_lld.c \
- ${CHIBIOS}/os/hal/platforms/STM32/serial_lld.c \
- ${CHIBIOS}/os/hal/platforms/STM32/spi_lld.c \
- ${CHIBIOS}/os/hal/platforms/STM32/uart_lld.c \
- ${CHIBIOS}/os/hal/platforms/STM32/stm32_dma.c \
- ${CHIBIOS}/os/hal/platforms/STM32/i2c_lld.c
-
-# Required include directories
-PLATFORMINC = ${CHIBIOS}/os/hal/platforms/STM32
diff --git a/os/hal/platforms/STM32/pwm_lld.c b/os/hal/platforms/STM32/pwm_lld.c index 85cef0553..efe215458 100644 --- a/os/hal/platforms/STM32/pwm_lld.c +++ b/os/hal/platforms/STM32/pwm_lld.c @@ -519,11 +519,13 @@ void pwm_lld_start(PWMDriver *pwmp) { pwmp->tim->EGR = TIM_EGR_UG; /* Update event. */
pwmp->tim->DIER = pwmp->config->callback == NULL ? 0 : TIM_DIER_UIE;
pwmp->tim->SR = 0; /* Clear pending IRQs. */
+#if STM32_PWM_USE_TIM1 || STM32_PWM_USE_TIM8
#if STM32_PWM_USE_ADVANCED
pwmp->tim->BDTR = pwmp->config->bdtr | TIM_BDTR_MOE;
#else
pwmp->tim->BDTR = TIM_BDTR_MOE;
#endif
+#endif
/* Timer configured and started.*/
pwmp->tim->CR1 = TIM_CR1_ARPE | TIM_CR1_URS | TIM_CR1_CEN;
}
@@ -542,7 +544,9 @@ void pwm_lld_stop(PWMDriver *pwmp) { pwmp->tim->CR1 = 0; /* Timer disabled. */
pwmp->tim->DIER = 0; /* All IRQs disabled. */
pwmp->tim->SR = 0; /* Clear eventual pending IRQs. */
+#if STM32_PWM_USE_TIM1 || STM32_PWM_USE_TIM8
pwmp->tim->BDTR = 0;
+#endif
#if STM32_PWM_USE_TIM1
if (&PWMD1 == pwmp) {
diff --git a/os/hal/platforms/STM32/adc_lld.c b/os/hal/platforms/STM32F1xx/adc_lld.c index 8a8027e55..8a8027e55 100644 --- a/os/hal/platforms/STM32/adc_lld.c +++ b/os/hal/platforms/STM32F1xx/adc_lld.c diff --git a/os/hal/platforms/STM32/adc_lld.h b/os/hal/platforms/STM32F1xx/adc_lld.h index ce93e60ed..ce93e60ed 100644 --- a/os/hal/platforms/STM32/adc_lld.h +++ b/os/hal/platforms/STM32F1xx/adc_lld.h diff --git a/os/hal/platforms/STM32/hal_lld.c b/os/hal/platforms/STM32F1xx/hal_lld.c index 081499b83..081499b83 100644 --- a/os/hal/platforms/STM32/hal_lld.c +++ b/os/hal/platforms/STM32F1xx/hal_lld.c diff --git a/os/hal/platforms/STM32/hal_lld.h b/os/hal/platforms/STM32F1xx/hal_lld.h index 44e179f49..44e179f49 100644 --- a/os/hal/platforms/STM32/hal_lld.h +++ b/os/hal/platforms/STM32F1xx/hal_lld.h diff --git a/os/hal/platforms/STM32/hal_lld_f100.h b/os/hal/platforms/STM32F1xx/hal_lld_f100.h index 571682e38..aad199528 100644 --- a/os/hal/platforms/STM32/hal_lld_f100.h +++ b/os/hal/platforms/STM32F1xx/hal_lld_f100.h @@ -343,7 +343,7 @@ #endif
/* APB1 frequency check.*/
-#if STM32_PCLK2 > 24000000
+#if STM32_PCLK1 > 24000000
#error "STM32_PCLK1 exceeding maximum frequency (24MHz)"
#endif
diff --git a/os/hal/platforms/STM32/hal_lld_f103.h b/os/hal/platforms/STM32F1xx/hal_lld_f103.h index 4421663a0..4421663a0 100644 --- a/os/hal/platforms/STM32/hal_lld_f103.h +++ b/os/hal/platforms/STM32F1xx/hal_lld_f103.h diff --git a/os/hal/platforms/STM32/hal_lld_f105_f107.h b/os/hal/platforms/STM32F1xx/hal_lld_f105_f107.h index 27a840ba8..27a840ba8 100644 --- a/os/hal/platforms/STM32/hal_lld_f105_f107.h +++ b/os/hal/platforms/STM32F1xx/hal_lld_f105_f107.h diff --git a/os/hal/platforms/STM32/platform.dox b/os/hal/platforms/STM32F1xx/platform.dox index 50ab84f38..50ab84f38 100644 --- a/os/hal/platforms/STM32/platform.dox +++ b/os/hal/platforms/STM32F1xx/platform.dox diff --git a/os/hal/platforms/STM32F1xx/platform.mk b/os/hal/platforms/STM32F1xx/platform.mk new file mode 100644 index 000000000..010a3f96d --- /dev/null +++ b/os/hal/platforms/STM32F1xx/platform.mk @@ -0,0 +1,22 @@ +# List of all the STM32F1xx platform files.
+PLATFORMSRC = ${CHIBIOS}/os/hal/platforms/STM32F1xx/hal_lld.c \
+ ${CHIBIOS}/os/hal/platforms/STM32F1xx/adc_lld.c \
+ ${CHIBIOS}/os/hal/platforms/STM32/can_lld.c \
+ ${CHIBIOS}/os/hal/platforms/STM32/gpt_lld.c \
+ ${CHIBIOS}/os/hal/platforms/STM32/icu_lld.c \
+ ${CHIBIOS}/os/hal/platforms/STM32/i2c_lld.c \
+ ${CHIBIOS}/os/hal/platforms/STM32/pwm_lld.c \
+ ${CHIBIOS}/os/hal/platforms/STM32/serial_lld.c \
+ ${CHIBIOS}/os/hal/platforms/STM32/GPIOv1/pal_lld.c \
+ ${CHIBIOS}/os/hal/platforms/STM32/DMAv1/sdc_lld.c \
+ ${CHIBIOS}/os/hal/platforms/STM32/DMAv1/spi_lld.c \
+ ${CHIBIOS}/os/hal/platforms/STM32/DMAv1/uart_lld.c \
+ ${CHIBIOS}/os/hal/platforms/STM32/DMAv1/stm32_dma.c \
+ ${CHIBIOS}/os/hal/platforms/STM32/USBv1/usb_lld.c
+
+# Required include directories
+PLATFORMINC = ${CHIBIOS}/os/hal/platforms/STM32F1xx \
+ ${CHIBIOS}/os/hal/platforms/STM32 \
+ ${CHIBIOS}/os/hal/platforms/STM32/GPIOv1 \
+ ${CHIBIOS}/os/hal/platforms/STM32/DMAv1 \
+ ${CHIBIOS}/os/hal/platforms/STM32/USBv1
diff --git a/os/hal/platforms/STM32/stm32f10x.h b/os/hal/platforms/STM32F1xx/stm32f10x.h index 8773ef453..8773ef453 100644 --- a/os/hal/platforms/STM32/stm32f10x.h +++ b/os/hal/platforms/STM32F1xx/stm32f10x.h diff --git a/os/hal/platforms/STM32F2xx/hal_lld.c b/os/hal/platforms/STM32F2xx/hal_lld.c new file mode 100644 index 000000000..3f7bf538b --- /dev/null +++ b/os/hal/platforms/STM32F2xx/hal_lld.c @@ -0,0 +1,164 @@ +/*
+ ChibiOS/RT - Copyright (C) 2006,2007,2008,2009,2010,
+ 2011 Giovanni Di Sirio.
+
+ This file is part of ChibiOS/RT.
+
+ ChibiOS/RT is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 3 of the License, or
+ (at your option) any later version.
+
+ ChibiOS/RT is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+/**
+ * @file STM32F2xx/hal_lld.c
+ * @brief STM32F2xx HAL subsystem low level driver source.
+ *
+ * @addtogroup HAL
+ * @{
+ */
+
+#include "ch.h"
+#include "hal.h"
+
+#define AIRCR_VECTKEY 0x05FA0000
+
+/*===========================================================================*/
+/* Driver exported variables. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver local variables. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver local functions. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver interrupt handlers. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver exported functions. */
+/*===========================================================================*/
+
+/**
+ * @brief Low level HAL driver initialization.
+ *
+ * @notapi
+ */
+void hal_lld_init(void) {
+
+ /* Reset of all peripherals.*/
+// RCC->APB1RSTR = 0xFFFFFFFF;
+// RCC->APB2RSTR = 0xFFFFFFFF;
+// RCC->APB1RSTR = 0;
+// RCC->APB2RSTR = 0;
+
+ /* SysTick initialization using the system clock.*/
+ SysTick->LOAD = STM32_HCLK / CH_FREQUENCY - 1;
+ SysTick->VAL = 0;
+ SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk |
+ SysTick_CTRL_ENABLE_Msk |
+ SysTick_CTRL_TICKINT_Msk;
+
+
+
+#if defined(STM32_DMA_REQUIRED)
+ dmaInit();
+#endif
+}
+
+/**
+ * @brief STM32F2xx clocks and PLL initialization.
+ * @note All the involved constants come from the file @p board.h.
+ * @note This function should be invoked just after the system reset.
+ *
+ * @special
+ */
+#if defined(STM32F2XX) || defined(__DOXYGEN__)
+/**
+ * @brief Clocks and internal voltage initialization.
+ */
+void stm32_clock_init(void) {
+
+#if !STM32_NO_INIT
+ /* PWR clock enable.*/
+ RCC->APB1ENR = RCC_APB1ENR_PWREN;
+
+ /* Initial clocks setup and wait for HSI stabilization, the MSI clock is
+ always enabled because it is the fallback clock when PLL the fails.*/
+ RCC->CR |= RCC_CR_HSION;
+ while ((RCC->CR & RCC_CR_HSIRDY) == 0)
+ ; /* Waits until HSI is stable. */
+
+#if STM32_HSE_ENABLED
+ /* HSE activation.*/
+ RCC->CR |= RCC_CR_HSEON;
+ while ((RCC->CR & RCC_CR_HSERDY) == 0)
+ ; /* Waits until HSE is stable. */
+#endif
+
+#if STM32_LSI_ENABLED
+ /* LSI activation.*/
+ RCC->CSR |= RCC_CSR_LSION;
+ while ((RCC->CSR & RCC_CSR_LSIRDY) == 0)
+ ; /* Waits until LSI is stable. */
+#endif
+
+#if STM32_LSE_ENABLED
+ /* LSE activation, have to unlock the register.*/
+ if ((RCC->BDCR & RCC_BDCR_LSEON) == 0) {
+ PWR->CR |= PWR_CR_DBP;
+ RCC->BDCR |= RCC_BDCR_LSEON;
+ PWR->CR &= ~PWR_CR_DBP;
+ }
+ while ((RCC->BDCR & RCC_BDCR_LSERDY) == 0)
+ ; /* Waits until LSE is stable. */
+#endif
+
+#if STM32_ACTIVATE_PLL
+ /* PLL activation.*/
+ RCC->PLLCFGR = STM32_PLLQ | STM32_PLLSRC | STM32_PLLP | STM32_PLLN | STM32_PLLM;
+ RCC->CR |= RCC_CR_PLLON;
+ while (!(RCC->CR & RCC_CR_PLLRDY))
+ ; /* Waits until PLL is stable. */
+#endif
+
+#if STM32_ACTIVATE_PLLI2S
+ /* PLLI2S activation.*/
+ RCC->PLLI2SCFGR = STM32_PLI2SR_VALUE | STM32_PLLI2SN_VALUE;
+ RCC->CR |= RCC_CR_PLLI2SON;
+ while (!(RCC->CR & RCC_CR_PLLI2SRDY))
+ ; /* Waits until PLLI2S is stable. */
+#endif
+
+ /* Other clock-related settings (dividers, MCO etc).*/
+ RCC->CFGR |= STM32_MCO2PRE | STM32_MCO2SEL | STM32_MCO1PRE | STM32_MCO1SEL |
+ STM32_RTCPRE | STM32_PPRE2 | STM32_PPRE1 | STM32_HPRE;
+
+ /* Flash setup. */
+ FLASH->ACR = FLASH_ACR_PRFTEN | FLASH_ACR_ICEN | FLASH_ACR_DCEN | STM32_FLASHBITS;
+
+ /* Switching to the configured clock source if it is different from MSI. */
+#if (STM32_SW != STM32_SW_HSI)
+ RCC->CFGR |= STM32_SW; /* Switches on the selected clock source. */
+ while ((RCC->CFGR & RCC_CFGR_SWS) != (STM32_SW << 2))
+ ;
+#endif
+#endif /* STM32_NO_INIT */
+}
+#else
+void stm32_clock_init(void) {}
+#endif
+
+/** @} */
diff --git a/os/hal/platforms/STM32F2xx/hal_lld.h b/os/hal/platforms/STM32F2xx/hal_lld.h new file mode 100644 index 000000000..0cdfc69c9 --- /dev/null +++ b/os/hal/platforms/STM32F2xx/hal_lld.h @@ -0,0 +1,957 @@ +/*
+ ChibiOS/RT - Copyright (C) 2006,2007,2008,2009,2010,
+ 2011 Giovanni Di Sirio.
+
+ This file is part of ChibiOS/RT.
+
+ ChibiOS/RT is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 3 of the License, or
+ (at your option) any later version.
+
+ ChibiOS/RT is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+/**
+ * @file STM32F2xx/hal_lld.h
+ * @brief STM32F2xx HAL subsystem low level driver header.
+ * @pre This module requires the following macros to be defined in the
+ * @p board.h file:
+ * - STM32_LSECLK.
+ * - STM32_HSECLK.
+ * .
+ * One of the following macros must also be defined:
+ * - STM32F2XX for High-performance STM32 F-2 devices.
+ * .
+ *
+ * @addtogroup HAL
+ * @{
+ */
+
+#ifndef _HAL_LLD_H_
+#define _HAL_LLD_H_
+
+/* Tricks required to make the TRUE/FALSE declaration inside the library
+ compatible.*/
+#undef FALSE
+#undef TRUE
+#include "stm32f2xx.h"
+#define FALSE 0
+#define TRUE (!FALSE)
+
+/*===========================================================================*/
+/* Driver constants. */
+/*===========================================================================*/
+
+/**
+ * @brief Platform name.
+ */
+#define PLATFORM_NAME "STM32F2 High performance"
+
+#define STM32_HSICLK 16000000 /**< High speed internal clock. */
+#define STM32_LSICLK 38000 /**< Low speed internal clock. */
+
+/* RCC_PLLCFGR register bits definitions.*/
+#define STM32_PLLP_MASK (3 << 16) /**< PLLP mask. */
+#define STM32_PLLP_DIV2 (0 << 16) /**< PLL clock divided by 2. */
+#define STM32_PLLP_DIV4 (1 << 16) /**< PLL clock divided by 4. */
+#define STM32_PLLP_DIV6 (2 << 16) /**< PLL clock divided by 6. */
+#define STM32_PLLP_DIV8 (3 << 16) /**< PLL clock divided by 8. */
+
+#define STM32_PLLSRC_HSI (0 << 22) /**< PLL clock source is HSI. */
+#define STM32_PLLSRC_HSE (1 << 22) /**< PLL clock source is HSE. */
+
+/* RCC_CFGR register bits definitions.*/
+#define STM32_SW_MASK (3 << 0) /**< SW mask. */
+#define STM32_SW_HSI (0 << 0) /**< SYSCLK source is HSI. */
+#define STM32_SW_HSE (1 << 0) /**< SYSCLK source is HSE. */
+#define STM32_SW_PLL (2 << 0) /**< SYSCLK source is PLL. */
+
+#define STM32_HPRE_MASK (15 << 4) /**< HPRE mask. */
+#define STM32_HPRE_DIV1 (0 << 4) /**< SYSCLK divided by 1. */
+#define STM32_HPRE_DIV2 (8 << 4) /**< SYSCLK divided by 2. */
+#define STM32_HPRE_DIV4 (9 << 4) /**< SYSCLK divided by 4. */
+#define STM32_HPRE_DIV8 (10 << 4) /**< SYSCLK divided by 8. */
+#define STM32_HPRE_DIV16 (11 << 4) /**< SYSCLK divided by 16. */
+#define STM32_HPRE_DIV64 (12 << 4) /**< SYSCLK divided by 64. */
+#define STM32_HPRE_DIV128 (13 << 4) /**< SYSCLK divided by 128. */
+#define STM32_HPRE_DIV256 (14 << 4) /**< SYSCLK divided by 256. */
+#define STM32_HPRE_DIV512 (15 << 4) /**< SYSCLK divided by 512. */
+
+#define STM32_PPRE1_MASK (7 << 10) /**< PPRE1 mask. */
+#define STM32_PPRE1_DIV1 (0 << 10) /**< HCLK divided by 1. */
+#define STM32_PPRE1_DIV2 (4 << 10) /**< HCLK divided by 2. */
+#define STM32_PPRE1_DIV4 (5 << 10) /**< HCLK divided by 4. */
+#define STM32_PPRE1_DIV8 (6 << 10) /**< HCLK divided by 8. */
+#define STM32_PPRE1_DIV16 (7 << 10) /**< HCLK divided by 16. */
+
+#define STM32_PPRE2_MASK (7 << 13) /**< PPRE2 mask. */
+#define STM32_PPRE2_DIV1 (0 << 13) /**< HCLK divided by 1. */
+#define STM32_PPRE2_DIV2 (4 << 13) /**< HCLK divided by 2. */
+#define STM32_PPRE2_DIV4 (5 << 13) /**< HCLK divided by 4. */
+#define STM32_PPRE2_DIV8 (6 << 13) /**< HCLK divided by 8. */
+#define STM32_PPRE2_DIV16 (7 << 13) /**< HCLK divided by 16. */
+
+#define STM32_RTCPRE_MASK (31 << 16) /**< RTCPRE mask. */
+
+#define STM32_MCO1SEL_MASK (3 << 21) /**< MCO1 mask. */
+#define STM32_MCO1SEL_HSI (0 << 21) /**< HSI clock on MCO1 pin. */
+#define STM32_MCO1SEL_LSE (1 << 21) /**< LSE clock on MCO1 pin. */
+#define STM32_MCO1SEL_HSE (2 << 21) /**< HSE clock on MCO1 pin. */
+#define STM32_MCO1SEL_PLL (3 << 21) /**< PLL clock on MCO1 pin. */
+
+#define STM32_MCO1PRE_MASK (7 << 24) /**< MCO1PRE mask. */
+#define STM32_MCO1PRE_DIV1 (0 << 24) /**< MCO1 divided by 1. */
+#define STM32_MCO1PRE_DIV2 (1 << 24) /**< MCO1 divided by 2. */
+#define STM32_MCO1PRE_DIV3 (2 << 24) /**< MCO1 divided by 3. */
+#define STM32_MCO1PRE_DIV4 (3 << 24) /**< MCO1 divided by 4. */
+#define STM32_MCO1PRE_DIV5 (4 << 24) /**< MCO1 divided by 5. */
+
+#define STM32_MCO2PRE_MASK (7 << 27) /**< MCO2PRE mask. */
+#define STM32_MCO2PRE_DIV1 (0 << 27) /**< MCO2 divided by 1. */
+#define STM32_MCO2PRE_DIV2 (4 << 27) /**< MCO2 divided by 2. */
+#define STM32_MCO2PRE_DIV3 (5 << 27) /**< MCO2 divided by 3. */
+#define STM32_MCO2PRE_DIV4 (6 << 27) /**< MCO2 divided by 4. */
+#define STM32_MCO2PRE_DIV5 (7 << 27) /**< MCO2 divided by 5. */
+
+#define STM32_MCO2SEL_MASK (3 << 30) /**< MCO2 mask. */
+#define STM32_MCO2SEL_SYSCLK (0 << 30) /**< SYSCLK clock on MCO2 pin. */
+#define STM32_MCO2SEL_PLLI2S (1 << 30) /**< PLLI2S clock on MCO2 pin. */
+#define STM32_MCO2SEL_HSE (2 << 30) /**< HSE clock on MCO2 pin. */
+#define STM32_MCO2SEL_PLL (3 << 30) /**< PLL clock on MCO2 pin. */
+
+/* RCC_PLLI2SCFGR register bits definitions.*/
+#define STM32_PLLI2SN_MASK (511 << 6) /**< PLLI2SN mask. */
+#define STM32_PLLI2SR_MASK (7 << 28) /**< PLLI2SR mask. */
+
+/* STM32F2xx capabilities.*/
+#define STM32_HAS_ADC1 TRUE
+#define STM32_HAS_ADC2 TRUE
+#define STM32_HAS_ADC3 FALSE
+
+#define STM32_HAS_CAN1 TRUE
+#define STM32_HAS_CAN2 TRUE
+
+#define STM32_HAS_DAC TRUE
+
+#define STM32_HAS_DMA1 TRUE
+#define STM32_HAS_DMA2 TRUE
+
+#define STM32_HAS_ETH TRUE
+
+#define STM32_HAS_GPIOA TRUE
+#define STM32_HAS_GPIOB TRUE
+#define STM32_HAS_GPIOC TRUE
+#define STM32_HAS_GPIOD TRUE
+#define STM32_HAS_GPIOE TRUE
+#define STM32_HAS_GPIOF TRUE
+#define STM32_HAS_GPIOG TRUE
+#define STM32_HAS_GPIOH TRUE
+
+#define STM32_HAS_I2C1 TRUE
+#define STM32_HAS_I2C2 TRUE
+
+#define STM32_HAS_RTC TRUE
+
+#define STM32_HAS_SDIO TRUE
+
+#define STM32_HAS_SPI1 TRUE
+#define STM32_HAS_SPI2 TRUE
+#define STM32_HAS_SPI3 TRUE
+
+#define STM32_HAS_TIM1 TRUE
+#define STM32_HAS_TIM2 TRUE
+#define STM32_HAS_TIM3 TRUE
+#define STM32_HAS_TIM4 TRUE
+#define STM32_HAS_TIM5 TRUE
+#define STM32_HAS_TIM6 TRUE
+#define STM32_HAS_TIM7 TRUE
+#define STM32_HAS_TIM8 TRUE
+#define STM32_HAS_TIM9 TRUE
+#define STM32_HAS_TIM10 TRUE
+#define STM32_HAS_TIM11 TRUE
+#define STM32_HAS_TIM12 TRUE
+#define STM32_HAS_TIM13 TRUE
+#define STM32_HAS_TIM14 TRUE
+#define STM32_HAS_TIM15 FALSE
+#define STM32_HAS_TIM16 FALSE
+#define STM32_HAS_TIM17 FALSE
+
+#define STM32_HAS_USART1 TRUE
+#define STM32_HAS_USART2 TRUE
+#define STM32_HAS_USART3 TRUE
+#define STM32_HAS_UART3 FALSE
+#define STM32_HAS_UART4 FALSE
+
+#define STM32_HAS_USB TRUE
+#define STM32_HAS_OTG1 TRUE
+
+/*===========================================================================*/
+/* Platform specific friendly IRQ names. */
+/*===========================================================================*/
+
+#define WWDG_IRQHandler Vector40 /**< Window Watchdog. */
+#define PVD_IRQHandler Vector44 /**< PVD through EXTI Line
+ detect. */
+#define TAMPER_IRQHandler Vector48 /**< Tamper. */
+#define RTC_IRQHandler Vector4C /**< RTC. */
+#define FLASH_IRQHandler Vector50 /**< Flash. */
+#define RCC_IRQHandler Vector54 /**< RCC. */
+#define EXTI0_IRQHandler Vector58 /**< EXTI Line 0. */
+#define EXTI1_IRQHandler Vector5C /**< EXTI Line 1. */
+#define EXTI2_IRQHandler Vector60 /**< EXTI Line 2. */
+#define EXTI3_IRQHandler Vector64 /**< EXTI Line 3. */
+#define EXTI4_IRQHandler Vector68 /**< EXTI Line 4. */
+#define DMA1_Stream0_IRQHandler Vector6C /**< DMA1 Stream 0. */
+#define DMA1_Stream1_IRQHandler Vector70 /**< DMA1 Stream 1. */
+#define DMA1_Stream2_IRQHandler Vector74 /**< DMA1 Stream 2. */
+#define DMA1_Stream3_IRQHandler Vector78 /**< DMA1 Stream 3. */
+#define DMA1_Stream4_IRQHandler Vector7C /**< DMA1 Stream 4. */
+#define DMA1_Stream5_IRQHandler Vector80 /**< DMA1 Stream 5. */
+#define DMA1_Stream6_IRQHandler Vector84 /**< DMA1 Stream 6. */
+#define ADC1_2_3_IRQHandler Vector88 /**< ADC1, ADC2 and ADC3. */
+#define CAN1_TX_IRQHandler Vector8C /**< CAN1 TX. */
+#define CAN1_RX0_IRQHandler Vector90 /**< CAN1 RX0. */
+#define CAN1_RX1_IRQHandler Vector94 /**< CAN1 RX1. */
+#define CAN1_SCE_IRQHandler Vector98 /**< CAN1 SCE. */
+#define EXTI9_5_IRQHandler Vector9C /**< EXTI Line 9..5. */
+#define TIM1_BRK_IRQHandler VectorA0 /**< TIM1 Break. */
+#define TIM1_UP_IRQHandler VectorA4 /**< TIM1 Update. */
+#define TIM1_TRG_COM_IRQHandler VectorA8 /**< TIM1 Trigger and
+ Commutation. */
+#define TIM1_CC_IRQHandler VectorAC /**< TIM1 Capture Compare. */
+#define TIM2_IRQHandler VectorB0 /**< TIM2. */
+#define TIM3_IRQHandler VectorB4 /**< TIM3. */
+#define TIM4_IRQHandler VectorB8 /**< TIM4. */
+#define I2C1_EV_IRQHandler VectorBC /**< I2C1 Event. */
+#define I2C1_ER_IRQHandler VectorC0 /**< I2C1 Error. */
+#define I2C2_EV_IRQHandler VectorC4 /**< I2C2 Event. */
+#define I2C2_ER_IRQHandler VectorC8 /**< I2C1 Error. */
+#define SPI1_IRQHandler VectorCC /**< SPI1. */
+#define SPI2_IRQHandler VectorD0 /**< SPI2. */
+#define USART1_IRQHandler VectorD4 /**< USART1. */
+#define USART2_IRQHandler VectorD8 /**< USART2. */
+#define USART3_IRQHandler VectorDC /**< USART3. */
+#define EXTI15_10_IRQHandler VectorE0 /**< EXTI Line 15..10. */
+#define RTCAlarm_IRQHandler VectorE4 /**< RTC alarm through EXTI
+ line. */
+#define OTG_FS_WKUP_IRQHandler VectorE8 /**< USB OTG FS Wakeup through
+ EXTI line. */
+#define TIM8_BRK_IRQHandler VectorEC /**< TIM8 Break. */
+#define TIM8_UP_IRQHandler VectorF0 /**< TIM8 Update. */
+#define TIM8_TRG_COM_IRQHandler VectorF4 /**< TIM8 Trigger and
+ Commutation. */
+#define TIM8_CC_IRQHandler VectorF8 /**< TIM8 Capture Compare. */
+#define DMA1_Stream7_IRQHandler VectorFC /**< DMA1 Stream 7. */
+#define FSMC_IRQHandler Vector100 /**< FSMC. */
+#define TIM5_IRQHandler Vector108 /**< TIM5. */
+#define SPI3_IRQHandler Vector10C /**< SPI3. */
+#define UART4_IRQHandler Vector110 /**< UART4. */
+#define UART5_IRQHandler Vector114 /**< UART5. */
+#define TIM6_IRQHandler Vector118 /**< TIM6. */
+#define TIM7_IRQHandler Vector11C /**< TIM7. */
+#define DMA2_Stream0_IRQHandler Vector120 /**< DMA2 Stream0. */
+#define DMA2_Stream1_IRQHandler Vector124 /**< DMA2 Stream1. */
+#define DMA2_Stream2_IRQHandler Vector128 /**< DMA2 Stream2. */
+#define DMA2_Stream3_IRQHandler Vector12C /**< DMA2 Stream3. */
+#define DMA2_Stream4_IRQHandler Vector130 /**< DMA2 Stream4. */
+#define ETH_IRQHandler Vector134 /**< Ethernet. */
+#define ETH_WKUP_IRQHandler Vector138 /**< Ethernet Wakeup through
+ EXTI line. */
+#define CAN2_TX_IRQHandler Vector13C /**< CAN2 TX. */
+#define CAN2_RX0_IRQHandler Vector140 /**< CAN2 RX0. */
+#define CAN2_RX1_IRQHandler Vector144 /**< CAN2 RX1. */
+#define CAN2_SCE_IRQHandler Vector148 /**< CAN2 SCE. */
+#define OTG_FS_IRQHandler Vector14C /**< USB OTG FS. */
+#define DMA2_Stream5_IRQHandler Vector150 /**< DMA2 Stream5. */
+#define DMA2_Stream6_IRQHandler Vector154 /**< DMA2 Stream6. */
+#define DMA2_Stream7_IRQHandler Vector158 /**< DMA2 Stream7. */
+#define USART6_IRQHandler Vector15C /**< USART6. */
+#define I2C3_EV_IRQHandler Vector160 /**< I2C3 Event. */
+#define I2C3_ER_IRQHandler Vector164 /**< I2C3 Error. */
+#define OTG_HS_EP1_OUT_IRQHandler Vector168 /**< USB OTG HS End Point 1 Out.*/
+#define OTG_HS_EP1_IN_IRQHandler Vector16C /**< USB OTG HS End Point 1 In. */
+#define OTG_HS_WKUP_IRQHandler Vector168 /**< USB OTG HS Wakeup through
+ EXTI line. */
+#define OTG_HS_IRQHandler Vector16C /**< USB OTG HS. */
+#define DCMI_IRQHandler Vector16C /**< DCMI. */
+#define CRYP_IRQHandler Vector16C /**< CRYP. */
+#define HASH_RNG_IRQHandler Vector16C /**< Hash and Rng. */
+
+/*===========================================================================*/
+/* Driver pre-compile time settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Disables the PWR/RCC initialization in the HAL.
+ */
+#if !defined(STM32_NO_INIT) || defined(__DOXYGEN__)
+#define STM32_NO_INIT FALSE
+#endif
+
+/**
+ * @brief Enables or disables the HSI clock source.
+ */
+#if !defined(STM32_HSI_ENABLED) || defined(__DOXYGEN__)
+#define STM32_HSI_ENABLED TRUE
+#endif
+
+/**
+ * @brief Enables or disables the LSI clock source.
+ */
+#if !defined(STM32_LSI_ENABLED) || defined(__DOXYGEN__)
+#define STM32_LSI_ENABLED FALSE
+#endif
+
+/**
+ * @brief Enables or disables the HSE clock source.
+ */
+#if !defined(STM32_HSE_ENABLED) || defined(__DOXYGEN__)
+#define STM32_HSE_ENABLED TRUE
+#endif
+
+/**
+ * @brief Enables or disables the LSE clock source.
+ */
+#if !defined(STM32_LSE_ENABLED) || defined(__DOXYGEN__)
+#define STM32_LSE_ENABLED FALSE
+#endif
+
+/**
+ * @brief ADC clock setting.
+ */
+#if !defined(STM32_ADC_CLOCK_ENABLED) || defined(__DOXYGEN__)
+#define STM32_ADC_CLOCK_ENABLED TRUE
+#endif
+
+/**
+ * @brief USB clock setting.
+ */
+#if !defined(STM32_USB_CLOCK_ENABLED) || defined(__DOXYGEN__)
+#define STM32_USB_CLOCK_ENABLED TRUE
+#endif
+
+/**
+ * @brief Main clock source selection.
+ * @note If the selected clock source is not the PLL then the PLL is not
+ * initialized and started.
+ * @note The default value is calculated for a 32MHz system clock from
+ * the internal 16MHz HSI clock.
+ */
+#if !defined(STM32_SW) || defined(__DOXYGEN__)
+#define STM32_SW STM32_SW_PLL
+#endif
+
+/**
+ * @brief Clock source for the PLL.
+ * @note This setting has only effect if the PLL is selected as the
+ * system clock source.
+ * @note The default value is calculated for a 120MHz system clock from
+ * the external 25MHz HSE clock.
+ */
+#if !defined(STM32_PLLSRC) || defined(__DOXYGEN__)
+#define STM32_PLLSRC STM32_PLLSRC_HSE
+#endif
+
+/**
+ * @brief PLLM divider value.
+ * @note The allowed values are 2..63.
+ * @note The default value is calculated for a 120MHz system clock from
+ * an external 25MHz HSE clock.
+ */
+#if !defined(STM32_PLLM_VALUE) || defined(__DOXYGEN__)
+#define STM32_PLLM_VALUE 25
+#endif
+
+/**
+ * @brief PLLN multiplier value.
+ * @note The allowed values are 192..432.
+ * @note The default value is calculated for a 120MHz system clock from
+ * an external 25MHz HSE clock.
+ */
+#if !defined(STM32_PLLN_VALUE) || defined(__DOXYGEN__)
+#define STM32_PLLN_VALUE 240
+#endif
+
+/**
+ * @brief PLLP multiplier value.
+ * @note The allowed values are DIV2, DIV4, DIV6, DIV8.
+ * @note The default value is calculated for a 120MHz system clock from
+ * an external 25MHz HSE clock.
+ */
+#if !defined(STM32_PLLP_VALUE) || defined(__DOXYGEN__)
+#define STM32_PLLP_VALUE 2
+#endif
+
+/**
+ * @brief PLLQ multiplier value.
+ * @note The allowed values are 4..15.
+ * @note The default value is calculated for a 120MHz system clock from
+ * an external 25MHz HSE clock.
+ */
+#if !defined(STM32_PLLQ_VALUE) || defined(__DOXYGEN__)
+#define STM32_PLLQ_VALUE 5
+#endif
+
+/**
+ * @brief AHB prescaler value.
+ * @note The default value is calculated for a 120MHz system clock from
+ * an external 25MHz HSE clock.
+ */
+#if !defined(STM32_HPRE) || defined(__DOXYGEN__)
+#define STM32_HPRE STM32_HPRE_DIV1
+#endif
+
+/**
+ * @brief APB1 prescaler value.
+ */
+#if !defined(STM32_PPRE1) || defined(__DOXYGEN__)
+#define STM32_PPRE1 STM32_PPRE1_DIV4
+#endif
+
+/**
+ * @brief APB2 prescaler value.
+ */
+#if !defined(STM32_PPRE2) || defined(__DOXYGEN__)
+#define STM32_PPRE2 STM32_PPRE2_DIV2
+#endif
+
+/**
+ * @brief RTC prescaler value.
+ */
+#if !defined(STM32_RTCPRE_VALUE) || defined(__DOXYGEN__)
+#define STM32_RTCPRE_VALUE 25
+#endif
+
+/**
+ * @brief MC01 clock source value.
+ * @note The default value outputs HSI clock on MC01 pin.
+ */
+#if !defined(STM32_MCO1SEL) || defined(__DOXYGEN__)
+#define STM32_MCO1SEL STM32_MCO1SEL_HSI
+#endif
+
+/**
+ * @brief MC01 prescaler value.
+ * @note The default value outputs HSI clock on MC01 pin.
+ */
+#if !defined(STM32_MCO1PRE) || defined(__DOXYGEN__)
+#define STM32_MCO1PRE STM32_MCO1PRE_DIV1
+#endif
+
+/**
+ * @brief MC02 clock source value.
+ * @note The default value outputs SYSCLK / 5 on MC02 pin.
+ */
+#if !defined(STM32_MCO2SEL) || defined(__DOXYGEN__)
+#define STM32_MCO2SEL STM32_MCO2SEL_SYSCLK
+#endif
+
+/**
+ * @brief MC02 prescaler value.
+ * @note The default value outputs SYSCLK / 5 on MC02 pin.
+ */
+#if !defined(STM32_MCO2PRE) || defined(__DOXYGEN__)
+#define STM32_MCO2PRE STM32_MCO2PRE_DIV5
+#endif
+
+/**
+ * @brief PLLI2SN multiplier value.
+ * @note The allowed values are 192..432.
+ * @note The default value is calculated for a 48000 I2S clock with
+ * I2SDIV = 12 and I2SODD = 1.
+ */
+#if !defined(STM32_PLLI2SN_VALUE) || defined(__DOXYGEN__)
+#define STM32_PLLI2SN_VALUE 384
+#endif
+
+/**
+ * @brief PLLI2SR multiplier value.
+ * @note The allowed values are 2..7.
+ * @note The default value is calculated for a 48000 I2S clock with
+ * I2SDIV = 12 and I2SODD = 1.
+ */
+#if !defined(STM32_PLLI2SP_VALUE) || defined(__DOXYGEN__)
+#define STM32_PLI2SLP_VALUE 5
+#endif
+
+/*===========================================================================*/
+/* Derived constants and error checks. */
+/*===========================================================================*/
+
+/**
+ * @brief Maximum HSECLK.
+ */
+#define STM32_HSECLK_MAX 32000000
+
+/**
+ * @brief Maximum SYSCLK.
+ */
+#define STM32_SYSCLK_MAX 120000000
+
+/**
+ * @brief Maximum frequency thresholds and wait states for flash access.
+ * @note The values are valid for 2.7V to 3.6V supply range.
+ */
+#define STM32_0WS_THRESHOLD 30000000
+#define STM32_1WS_THRESHOLD 60000000
+#define STM32_2WS_THRESHOLD 90000000
+#define STM32_3WS_THRESHOLD 0
+#define STM32_4WS_THRESHOLD 0
+#define STM32_5WS_THRESHOLD 0
+#define STM32_6WS_THRESHOLD 0
+#define STM32_7WS_THRESHOLD 0
+
+/* HSI related checks.*/
+#if STM32_HSI_ENABLED
+#else /* !STM32_HSI_ENABLED */
+#if STM32_ADC_CLOCK_ENABLED || \
+ (STM32_SW == STM32_SW_HSI) || \
+ ((STM32_SW == STM32_SW_PLL) && \
+ (STM32_PLLSRC == STM32_PLLSRC_HSI)) || \
+ (STM32_MCO1SEL == STM32_MCO1SEL_HSI) || \
+ ((STM32_MCO1SEL == STM32_MCO1SEL_PLL) && \
+ (STM32_PLLSRC == STM32_PLLSRC_HSI))
+#error "required HSI clock is not enabled"
+#endif
+#endif /* !STM32_HSI_ENABLED */
+
+/* HSE related checks.*/
+#if STM32_HSE_ENABLED
+#if STM32_HSECLK == 0
+#error "impossible to activate HSE"
+#endif
+#if (STM32_HSECLK < 1000000) || (STM32_HSECLK > STM32_HSECLK_MAX)
+#error "STM32_HSECLK outside acceptable range (1MHz...STM32_HSECLK_MAX)"
+#endif
+#else /* !STM32_HSE_ENABLED */
+#if (STM32_SW == STM32_SW_HSE) || \
+ ((STM32_SW == STM32_SW_PLL) && \
+ (STM32_PLLSRC == STM32_PLLSRC_HSE)) || \
+ (STM32_MCO1SEL == STM32_MCO1SEL_HSE) || \
+ ((STM32_MCO1SEL == STM32_MCO1SEL_PLL) && \
+ (STM32_PLLSRC == STM32_PLLSRC_HSE)) || \
+ (STM32_MCO2SEL == STM32_MCO2SEL_HSE) || \
+ ((STM32_MCO2SEL == STM32_MCO2SEL_PLL) && \
+ (STM32_PLLSRC == STM32_PLLSRC_HSE)) || \
+ (STM_RTC_SOURCE == STM32_RTCSEL_HSEDIV)
+#error "required HSE clock is not enabled"
+#endif
+#endif /* !STM32_HSE_ENABLED */
+
+/* LSI related checks.*/
+#if STM32_LSI_ENABLED
+#else /* !STM32_LSI_ENABLED */
+#if STM_RTCCLK == STM32_LSICLK
+#error "required LSI clock is not enabled"
+#endif
+#endif /* !STM32_LSI_ENABLED */
+
+/* LSE related checks.*/
+#if STM32_LSE_ENABLED
+#if (STM32_LSECLK == 0)
+#error "impossible to activate LSE"
+#endif
+#if (STM32_LSECLK < 1000) || (STM32_LSECLK > 1000000)
+#error "STM32_LSECLK outside acceptable range (1...1000KHz)"
+#endif
+#else /* !#if STM32_LSE_ENABLED */
+#if STM_RTCCLK == STM32_LSECLK
+#error "required LSE clock is not enabled"
+#endif
+#endif /* !#if STM32_LSE_ENABLED */
+
+/* PLL related checks.*/
+#if STM32_USB_CLOCK_ENABLED || \
+ (STM32_SW == STM32_SW_PLL) || \
+ (STM32_MCO1SEL == STM32_MCO1SEL_PLL) || \
+ (STM32_MCO2SEL == STM32_MCO2SEL_PLL) || \
+ defined(__DOXYGEN__)
+/**
+ * @brief PLL activation flag.
+ */
+#define STM32_ACTIVATE_PLL TRUE
+#else
+#define STM32_ACTIVATE_PLL FALSE
+#endif
+
+/**
+ * @brief STM32_PLLM field.
+ */
+#if ((STM32_PLLM_VALUE >= 2) && (STM32_PLLM_VALUE <= 63)) || \
+ defined(__DOXYGEN__)
+#define STM32_PLLM STM32_PLLM_VALUE
+#else
+#error "invalid STM32_PLLM_VALUE value specified"
+#endif
+
+/**
+ * @brief STM32_PLLN field.
+ */
+#if ((STM32_PLLN_VALUE >= 192) && (STM32_PLLN_VALUE <= 432)) || \
+ defined(__DOXYGEN__)
+#define STM32_PLLN (STM32_PLLN_VALUE << 6)
+#else
+#error "invalid STM32_PLLN_VALUE value specified"
+#endif
+
+/**
+ * @brief STM32_PLLP field.
+ */
+#if (STM32_PLLP_VALUE == 2) || defined(__DOXYGEN__)
+#define STM32_PLLP (0 << 16)
+#elif STM32_PLLP_VALUE == 4
+#define STM32_PLLP (1 << 16)
+#elif STM32_PLLP_VALUE == 6
+#define STM32_PLLP (2 << 16)
+#elif STM32_PLLP_VALUE == 8
+#define STM32_PLLP (3 << 16)
+#else
+#error "invalid STM32_PLLP_VALUE value specified"
+#endif
+
+/**
+ * @brief STM32_PLLQ field.
+ */
+#if ((STM32_PLLQ_VALUE >= 4) && (STM32_PLLQ_VALUE <= 15)) || \
+ defined(__DOXYGEN__)
+#define STM32_PLLQ (STM32_PLLQ_VALUE << 24)
+#else
+#error "invalid STM32_PLLQ_VALUE value specified"
+#endif
+
+/**
+ * @brief PLL input clock frequency.
+ */
+#if (STM32_PLLSRC == STM32_PLLSRC_HSE) || defined(__DOXYGEN__)
+#define STM32_PLLCLKIN STM32_HSECLK
+#elif STM32_PLLSRC == STM32_PLLSRC_HSI
+#define STM32_PLLCLKIN STM32_HSICLK
+#else
+#error "invalid STM32_PLLSRC value specified"
+#endif
+
+/* PLL input frequency range check.*/
+#if (STM32_PLLCLKIN < 4000000) || (STM32_PLLCLKIN > 26000000)
+#error "STM32_PLLCLKIN outside acceptable range (4...26MHz)"
+#endif
+
+/**
+ * @brief PLL VCO frequency.
+ */
+#define STM32_PLLVCO ((STM32_PLLCLKIN / STM32_PLLM_VALUE) * \
+ STM32_PLLN_VALUE)
+
+/* PLL output frequency range check.*/
+#if (STM32_PLLVCO < 192000000) || (STM32_PLLVCO > 432000000)
+#error STM32_PLLVCO
+#error "STM32_PLLVCO outside acceptable range (192...432MHz)"
+#endif
+
+/**
+ * @brief PLL output clock frequency.
+ */
+#define STM32_PLLCLKOUT (STM32_PLLVCO / STM32_PLLP_VALUE)
+
+/* PLL output frequency range check.*/
+#if (STM32_PLLCLKOUT < 24000000) || (STM32_PLLCLKOUT > 120000000)
+#error "STM32_PLLCLKOUT outside acceptable range (24...120MHz)"
+#endif
+
+/**
+ * @brief System clock source.
+ */
+#if STM32_NO_INIT || defined(__DOXYGEN__)
+#define STM32_SYSCLK 96000000
+#elif (STM32_SW == STM32_SW_HSI)
+#define STM32_SYSCLK STM32_HSICLK
+#elif (STM32_SW == STM32_SW_HSE)
+#define STM32_SYSCLK STM32_HSECLK
+#elif (STM32_SW == STM32_SW_PLL)
+#define STM32_SYSCLK STM32_PLLCLKOUT
+#else
+#error "invalid STM32_SW value specified"
+#endif
+
+/* Check on the system clock.*/
+#if STM32_SYSCLK > STM32_SYSCLK_MAX
+#error "STM32_SYSCLK above maximum rated frequency (STM32_SYSCLK_MAX)"
+#endif
+
+/**
+ * @brief AHB frequency.
+ */
+#if (STM32_HPRE == STM32_HPRE_DIV1) || defined(__DOXYGEN__)
+#define STM32_HCLK (STM32_SYSCLK / 1)
+#elif STM32_HPRE == STM32_HPRE_DIV2
+#define STM32_HCLK (STM32_SYSCLK / 2)
+#elif STM32_HPRE == STM32_HPRE_DIV4
+#define STM32_HCLK (STM32_SYSCLK / 4)
+#elif STM32_HPRE == STM32_HPRE_DIV8
+#define STM32_HCLK (STM32_SYSCLK / 8)
+#elif STM32_HPRE == STM32_HPRE_DIV16
+#define STM32_HCLK (STM32_SYSCLK / 16)
+#elif STM32_HPRE == STM32_HPRE_DIV64
+#define STM32_HCLK (STM32_SYSCLK / 64)
+#elif STM32_HPRE == STM32_HPRE_DIV128
+#define STM32_HCLK (STM32_SYSCLK / 128)
+#elif STM32_HPRE == STM32_HPRE_DIV256
+#define STM32_HCLK (STM32_SYSCLK / 256)
+#elif STM32_HPRE == STM32_HPRE_DIV512
+#define STM32_HCLK (STM32_SYSCLK / 512)
+#else
+#error "invalid STM32_HPRE value specified"
+#endif
+
+/* AHB frequency check.*/
+#if STM32_HCLK > STM32_SYSCLK_MAX
+#error "STM32_HCLK exceeding maximum frequency (STM32_SYSCLK_MAX)"
+#endif
+
+/**
+ * @brief APB1 frequency.
+ */
+#if (STM32_PPRE1 == STM32_PPRE1_DIV1) || defined(__DOXYGEN__)
+#define STM32_PCLK1 (STM32_HCLK / 1)
+#elif STM32_PPRE1 == STM32_PPRE1_DIV2
+#define STM32_PCLK1 (STM32_HCLK / 2)
+#elif STM32_PPRE1 == STM32_PPRE1_DIV4
+#define STM32_PCLK1 (STM32_HCLK / 4)
+#elif STM32_PPRE1 == STM32_PPRE1_DIV8
+#define STM32_PCLK1 (STM32_HCLK / 8)
+#elif STM32_PPRE1 == STM32_PPRE1_DIV16
+#define STM32_PCLK1 (STM32_HCLK / 16)
+#else
+#error "invalid STM32_PPRE1 value specified"
+#endif
+
+/* APB1 frequency check.*/
+#if STM32_PCLK2 > STM32_SYSCLK_MAX
+#error "STM32_PCLK1 exceeding maximum frequency (STM32_SYSCLK_MAX)"
+#endif
+
+/**
+ * @brief APB2 frequency.
+ */
+#if (STM32_PPRE2 == STM32_PPRE2_DIV1) || defined(__DOXYGEN__)
+#define STM32_PCLK2 (STM32_HCLK / 1)
+#elif STM32_PPRE2 == STM32_PPRE2_DIV2
+#define STM32_PCLK2 (STM32_HCLK / 2)
+#elif STM32_PPRE2 == STM32_PPRE2_DIV4
+#define STM32_PCLK2 (STM32_HCLK / 4)
+#elif STM32_PPRE2 == STM32_PPRE2_DIV8
+#define STM32_PCLK2 (STM32_HCLK / 8)
+#elif STM32_PPRE2 == STM32_PPRE2_DIV16
+#define STM32_PCLK2 (STM32_HCLK / 16)
+#else
+#error "invalid STM32_PPRE2 value specified"
+#endif
+
+/* APB2 frequency check.*/
+#if STM32_PCLK2 > STM32_SYSCLK_MAX
+#error "STM32_PCLK2 exceeding maximum frequency (STM32_SYSCLK_MAX)"
+#endif
+
+/**
+ * @brief RTC frequency.
+ */
+#if ((STM32_RTCPRE_VALUE >= 2) && (STM32_RTCPRE_VALUE <= 31)) || \
+ defined(__DOXYGEN__)
+#define STM32_RTCPRE (STM32_RTCPRE_VALUE << 16)
+#else
+#error "invalid STM32_RTCPRE value specified"
+#endif
+
+/**
+ * @brief MCO1 divider clock.
+ */
+#if (STM32_MCO1SEL == STM32_MCO1SEL_HSI) || defined(__DOXYGEN__)
+#define STM_MCO1DIVCLK STM32_HSICLK
+#elif STM32_MCO1SEL == STM32_MCO1SEL_LSE
+#define STM_MCO1DIVCLK STM32_LSECLK
+#elif STM32_MCO1SEL == STM32_MCO1SEL_HSE
+#define STM_MCO1DIVCLK STM32_HSECLK
+#elif STM32_MCO1SEL == STM32_MCO1SEL_PLL
+#define STM_MCO1DIVCLK STM32_PLLCLKOUT
+#else
+#error "invalid STM32_MCO1SEL value specified"
+#endif
+
+/**
+ * @brief MCO1 output pin clock.
+ */
+#if (STM32_MCO1PRE == STM32_MCO1PRE_DIV1) || defined(__DOXYGEN__)
+#define STM_MCO1CLK STM_MCO1DIVCLK
+#elif STM32_MCO1PRE == STM32_MCO1PRE_DIV2
+#define STM_MCO1CLK (STM_MCO1DIVCLK / 2)
+#elif STM32_MCO1PRE == STM32_MCO1PRE_DIV3
+#define STM_MCO1CLK (STM_MCO1DIVCLK / 3)
+#elif STM32_MCO1PRE == STM32_MCO1PRE_DIV4
+#define STM_MCO1CLK (STM_MCO1DIVCLK / 4)
+#elif STM32_MCO1PRE == STM32_MCO1PRE_DIV5
+#define STM_MCO1CLK (STM_MCO1DIVCLK / 5)
+#else
+#error "invalid STM32_MCO1PRE value specified"
+#endif
+
+/**
+ * @brief MCO2 divider clock.
+ */
+#if (STM32_MCO2SEL == STM32_MCO2SEL_HSE) || defined(__DOXYGEN__)
+#define STM_MCO2DIVCLK STM32_HSECLK
+#elif STM32_MCO2SEL == STM32_MCO2SEL_PLL
+#define STM_MCO2DIVCLK STM32_PLLCLKOUT
+#elif STM32_MCO2SEL == STM32_MCO2SEL_SYSCLK
+#define STM_MCO2DIVCLK STM32_SYSCLK
+#elif STM32_MCO2SEL == STM32_MCO2SEL_PLLI2S
+#define STM_MCO2DIVCLK STM32_PLLI2S
+
+#else
+#error "invalid STM32_MCO2SEL value specified"
+#endif
+
+/**
+ * @brief MCO2 output pin clock.
+ */
+#if (STM32_MCO2PRE == STM32_MCO2PRE_DIV1) || defined(__DOXYGEN__)
+#define STM_MCO2CLK STM_MCO2DIVCLK
+#elif STM32_MCO2PRE == STM32_MCO2PRE_DIV2
+#define STM_MCO2CLK (STM_MCO2DIVCLK / 2)
+#elif STM32_MCO2PRE == STM32_MCO2PRE_DIV3
+#define STM_MCO2CLK (STM_MCO2DIVCLK / 3)
+#elif STM32_MCO2PRE == STM32_MCO2PRE_DIV4
+#define STM_MCO2CLK (STM_MCO2DIVCLK / 4)
+#elif STM32_MCO2PRE == STM32_MCO2PRE_DIV5
+#define STM_MCO2CLK (STM_MCO2DIVCLK / 5)
+#else
+#error "invalid STM32_MCO2PRE value specified"
+#endif
+
+/**
+ * @brief HSE divider toward RTC clock.
+ */
+#if ((STM32_RTCPRE_VALUE >= 2) && (STM32_RTCPRE_VALUE <= 31)) || \
+ defined(__DOXYGEN__)
+#define STM32_HSEDIVCLK (HSECLK / STM32_RTCPRE_VALUE)
+#else
+#error "invalid STM32_RTCPRE value specified"
+#endif
+
+/**
+ * @brief RTC clock.
+ */
+#if (STM32_RTCSEL == STM32_RTCSEL_NOCLOCK) || defined(__DOXYGEN__)
+#define STM_RTCCLK 0
+#elif STM32_RTCSEL == STM32_RTCSEL_LSE
+#define STM_RTCCLK STM32_LSECLK
+#elif STM32_RTCSEL == STM32_RTCSEL_LSI
+#define STM_RTCCLK STM32_LSICLK
+#elif STM32_RTCSEL == STM32_RTCSEL_HSEDIV
+#define STM_RTCCLK STM32_HSEDIVCLK
+#else
+#error "invalid STM32_RTCSEL value specified"
+#endif
+
+/**
+ * @brief ADC frequency.
+ */
+#if (STM32_ADCPRE == STM32_ADCPRE_DIV2) || defined(__DOXYGEN__)
+#define STM32_ADCCLK (STM32_PCLK2 / 2)
+#elif STM32_ADCPRE == STM32_ADCPRE_DIV4
+#define STM32_ADCCLK (STM32_PCLK2 / 4)
+#elif STM32_ADCPRE == STM32_ADCPRE_DIV6
+#define STM32_ADCCLK (STM32_PCLK2 / 6)
+#elif STM32_ADCPRE == STM32_ADCPRE_DIV8
+#define STM32_ADCCLK (STM32_PCLK2 / 8)
+#else
+#error "invalid STM32_ADCPRE value specified"
+#endif
+
+/* ADC frequency check.*/
+#if STM32_ADCCLK > 30000000
+#error "STM32_ADCCLK exceeding maximum frequency (30MHz)"
+#endif
+
+/**
+ * @brief OTG frequency.
+ */
+#if (STM32_OTGFSPRE == STM32_OTGFSPRE_DIV3) || defined(__DOXYGEN__)
+#define STM32_OTGFSCLK (STM32_PLLVCO / 3)
+#elif (STM32_OTGFSPRE == STM32_OTGFSPRE_DIV2)
+#define STM32_OTGFSCLK (STM32_PLLVCO / 2)
+#else
+#error "invalid STM32_OTGFSPRE value specified"
+#endif
+
+/**
+ * @brief Timers 2, 3, 4, 5, 6, 7, 9, 10, 11, 12, 13, 14 clock.
+ */
+#if (STM32_PPRE1 == STM32_PPRE1_DIV1) || defined(__DOXYGEN__)
+#define STM32_TIMCLK1 (STM32_PCLK1 * 1)
+#else
+#define STM32_TIMCLK1 (STM32_PCLK1 * 2)
+#endif
+
+/**
+ * @brief Timers 1, 8 clock.
+ */
+#if (STM32_PPRE2 == STM32_PPRE2_DIV1) || defined(__DOXYGEN__)
+#define STM32_TIMCLK2 (STM32_PCLK2 * 1)
+#else
+#define STM32_TIMCLK2 (STM32_PCLK2 * 2)
+#endif
+
+/**
+ * @brief Flash settings.
+ */
+#if (STM32_HCLK <= STM32_0WS_THRESHOLD) || defined(__DOXYGEN__)
+#define STM32_FLASHBITS 0x00000000
+#elif STM32_HCLK <= STM32_1WS_THRESHOLD
+#define STM32_FLASHBITS 0x00000001
+#elif STM32_HCLK <= STM32_2WS_THRESHOLD
+#define STM32_FLASHBITS 0x00000002
+#elif STM32_HCLK <= STM32_3WS_THRESHOLD
+#define STM32_FLASHBITS 0x00000003
+#elif STM32_HCLK <= STM32_4WS_THRESHOLD
+#define STM32_FLASHBITS 0x00000004
+#elif STM32_HCLK <= STM32_5WS_THRESHOLD
+#define STM32_FLASHBITS 0x00000005
+#elif STM32_HCLK <= STM32_6WS_THRESHOLD
+#define STM32_FLASHBITS 0x00000006
+#else
+#define STM32_FLASHBITS 0x00000007
+#endif
+
+/*===========================================================================*/
+/* Driver data structures and types. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver macros. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* External declarations. */
+/*===========================================================================*/
+
+/* STM32 DMA support code.*/
+//#include "stm32_dma.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+ void hal_lld_init(void);
+ void stm32_clock_init(void);
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* _HAL_LLD_H_ */
+
+/** @} */
diff --git a/os/hal/platforms/STM32F2xx/platform.mk b/os/hal/platforms/STM32F2xx/platform.mk new file mode 100644 index 000000000..c1502009f --- /dev/null +++ b/os/hal/platforms/STM32F2xx/platform.mk @@ -0,0 +1,13 @@ +# List of all the STM32L1xx platform files.
+PLATFORMSRC = ${CHIBIOS}/os/hal/platforms/STM32F2xx/hal_lld.c \
+ ${CHIBIOS}/os/hal/platforms/STM32/gpt_lld.c \
+ ${CHIBIOS}/os/hal/platforms/STM32/icu_lld.c \
+ ${CHIBIOS}/os/hal/platforms/STM32/pwm_lld.c \
+ ${CHIBIOS}/os/hal/platforms/STM32/serial_lld.c \
+ ${CHIBIOS}/os/hal/platforms/STM32/GPIOv2/pal_lld.c
+
+# Required include directories
+PLATFORMINC = ${CHIBIOS}/os/hal/platforms/STM32F2xx \
+ ${CHIBIOS}/os/hal/platforms/STM32 \
+ ${CHIBIOS}/os/hal/platforms/STM32/GPIOv2 \
+ ${CHIBIOS}/os/hal/platforms/STM32/DMAv2
diff --git a/os/hal/platforms/STM32F2xx/stm32f2xx.h b/os/hal/platforms/STM32F2xx/stm32f2xx.h new file mode 100644 index 000000000..51bcaf363 --- /dev/null +++ b/os/hal/platforms/STM32F2xx/stm32f2xx.h @@ -0,0 +1,6871 @@ +/**
+ ******************************************************************************
+ * @file stm32f2xx.h
+ * @author MCD Application Team
+ * @version V1.0.0
+ * @date 18-April-2011
+ * @brief CMSIS Cortex-M3 Device Peripheral Access Layer Header File.
+ * This file contains all the peripheral register's definitions, bits
+ * definitions and memory mapping for STM32F2xx devices.
+ *
+ * The file is the unique include file that the application programmer
+ * is using in the C source code, usually in main.c. This file contains:
+ * - Configuration section that allows to select:
+ * - The device used in the target application
+ * - To use or not the peripheral’s drivers in application code(i.e.
+ * code will be based on direct access to peripheral’s registers
+ * rather than drivers API), this option is controlled by
+ * "#define USE_STDPERIPH_DRIVER"
+ * - To change few application-specific parameters such as the HSE
+ * crystal frequency
+ * - Data structures and the address mapping for all peripherals
+ * - Peripheral's registers declarations and bits definition
+ * - Macros to access peripheral’s registers hardware
+ *
+ ******************************************************************************
+ * @attention
+ *
+ * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+ * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+ * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+ * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+ * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+ * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+ *
+ * <h2><center>© COPYRIGHT 2011 STMicroelectronics</center></h2>
+ ******************************************************************************
+ */
+
+/** @addtogroup CMSIS
+ * @{
+ */
+
+/** @addtogroup stm32f2xx
+ * @{
+ */
+
+#ifndef __STM32F2xx_H
+#define __STM32F2xx_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif /* __cplusplus */
+
+/** @addtogroup Library_configuration_section
+ * @{
+ */
+
+/* Uncomment the line below according to the target STM32 device used in your
+ application
+ */
+
+#if !defined (STM32F2XX)
+ #define STM32F2XX
+#endif
+
+/* Tip: To avoid modifying this file each time you need to switch between these
+ devices, you can define the device in your toolchain compiler preprocessor.
+ */
+
+#if !defined (STM32F2XX)
+ #error "Please select first the target STM32F2XX device used in your application (in stm32f2xx.h file)"
+#endif
+
+#if !defined (USE_STDPERIPH_DRIVER)
+/**
+ * @brief Comment the line below if you will not use the peripherals drivers.
+ In this case, these drivers will not be included and the application code will
+ be based on direct access to peripherals registers
+ */
+ /*#define USE_STDPERIPH_DRIVER*/
+#endif /* USE_STDPERIPH_DRIVER */
+
+/**
+ * @brief In the following line adjust the value of External High Speed oscillator (HSE)
+ used in your application
+
+ Tip: To avoid modifying this file each time you need to use different HSE, you
+ can define the HSE value in your toolchain compiler preprocessor.
+ */
+#define HSE_VALUE ((uint32_t)25000000) /*!< Value of the External oscillator in Hz */
+
+/**
+ * @brief In the following line adjust the External High Speed oscillator (HSE) Startup
+ Timeout value
+ */
+#define HSE_STARTUP_TIMEOUT ((uint16_t)0x0500) /*!< Time out for HSE start up */
+#define HSI_VALUE ((uint32_t)16000000) /*!< Value of the Internal oscillator in Hz*/
+
+/**
+ * @brief STM32F2Xxx Standard Peripherals Library version number V1.0.0
+ */
+#define __STM32F2XX_STDPERIPH_VERSION_MAIN (0x01) /*!< [31:24] main version */
+#define __STM32F2XX_STDPERIPH_VERSION_SUB1 (0x00) /*!< [23:16] sub1 version */
+#define __STM32F2XX_STDPERIPH_VERSION_SUB2 (0x00) /*!< [15:8] sub2 version */
+#define __STM32F2XX_STDPERIPH_VERSION_RC (0x00) /*!< [7:0] release candidate */
+#define __STM32F2XX_STDPERIPH_VERSION ((__STM32F2XX_STDPERIPH_VERSION_MAIN << 24)\
+ |(__STM32F2XX_STDPERIPH_VERSION_SUB1 << 16)\
+ |(__STM32F2XX_STDPERIPH_VERSION_SUB2 << 8)\
+ |(__STM32F2XX_STDPERIPH_VERSION_RC))
+
+/**
+ * @}
+ */
+
+/** @addtogroup Configuration_section_for_CMSIS
+ * @{
+ */
+
+/**
+ * @brief Configuration of the Cortex-M3 Processor and Core Peripherals
+ */
+#define __MPU_PRESENT 1 /*!< STM32F2XX provide an MPU */
+#define __NVIC_PRIO_BITS 4 /*!< STM32F2XX uses 4 Bits for the Priority Levels */
+#define __Vendor_SysTickConfig 0 /*!< Set to 1 if different SysTick Config is used */
+
+/**
+ * @brief STM32F2XX Interrupt Number Definition, according to the selected device
+ * in @ref Library_configuration_section
+ */
+typedef enum IRQn
+{
+/****** Cortex-M3 Processor Exceptions Numbers ****************************************************************/
+ NonMaskableInt_IRQn = -14, /*!< 2 Non Maskable Interrupt */
+ MemoryManagement_IRQn = -12, /*!< 4 Cortex-M3 Memory Management Interrupt */
+ BusFault_IRQn = -11, /*!< 5 Cortex-M3 Bus Fault Interrupt */
+ UsageFault_IRQn = -10, /*!< 6 Cortex-M3 Usage Fault Interrupt */
+ SVCall_IRQn = -5, /*!< 11 Cortex-M3 SV Call Interrupt */
+ DebugMonitor_IRQn = -4, /*!< 12 Cortex-M3 Debug Monitor Interrupt */
+ PendSV_IRQn = -2, /*!< 14 Cortex-M3 Pend SV Interrupt */
+ SysTick_IRQn = -1, /*!< 15 Cortex-M3 System Tick Interrupt */
+/****** STM32 specific Interrupt Numbers **********************************************************************/
+ WWDG_IRQn = 0, /*!< Window WatchDog Interrupt */
+ PVD_IRQn = 1, /*!< PVD through EXTI Line detection Interrupt */
+ TAMP_STAMP_IRQn = 2, /*!< Tamper and TimeStamp interrupts through the EXTI line */
+ RTC_WKUP_IRQn = 3, /*!< RTC Wakeup interrupt through the EXTI line */
+ FLASH_IRQn = 4, /*!< FLASH global Interrupt */
+ RCC_IRQn = 5, /*!< RCC global Interrupt */
+ EXTI0_IRQn = 6, /*!< EXTI Line0 Interrupt */
+ EXTI1_IRQn = 7, /*!< EXTI Line1 Interrupt */
+ EXTI2_IRQn = 8, /*!< EXTI Line2 Interrupt */
+ EXTI3_IRQn = 9, /*!< EXTI Line3 Interrupt */
+ EXTI4_IRQn = 10, /*!< EXTI Line4 Interrupt */
+ DMA1_Stream0_IRQn = 11, /*!< DMA1 Stream 0 global Interrupt */
+ DMA1_Stream1_IRQn = 12, /*!< DMA1 Stream 1 global Interrupt */
+ DMA1_Stream2_IRQn = 13, /*!< DMA1 Stream 2 global Interrupt */
+ DMA1_Stream3_IRQn = 14, /*!< DMA1 Stream 3 global Interrupt */
+ DMA1_Stream4_IRQn = 15, /*!< DMA1 Stream 4 global Interrupt */
+ DMA1_Stream5_IRQn = 16, /*!< DMA1 Stream 5 global Interrupt */
+ DMA1_Stream6_IRQn = 17, /*!< DMA1 Stream 6 global Interrupt */
+ ADC_IRQn = 18, /*!< ADC1, ADC2 and ADC3 global Interrupts */
+ CAN1_TX_IRQn = 19, /*!< CAN1 TX Interrupt */
+ CAN1_RX0_IRQn = 20, /*!< CAN1 RX0 Interrupt */
+ CAN1_RX1_IRQn = 21, /*!< CAN1 RX1 Interrupt */
+ CAN1_SCE_IRQn = 22, /*!< CAN1 SCE Interrupt */
+ EXTI9_5_IRQn = 23, /*!< External Line[9:5] Interrupts */
+ TIM1_BRK_TIM9_IRQn = 24, /*!< TIM1 Break interrupt and TIM9 global interrupt */
+ TIM1_UP_TIM10_IRQn = 25, /*!< TIM1 Update Interrupt and TIM10 global interrupt */
+ TIM1_TRG_COM_TIM11_IRQn = 26, /*!< TIM1 Trigger and Commutation Interrupt and TIM11 global interrupt */
+ TIM1_CC_IRQn = 27, /*!< TIM1 Capture Compare Interrupt */
+ TIM2_IRQn = 28, /*!< TIM2 global Interrupt */
+ TIM3_IRQn = 29, /*!< TIM3 global Interrupt */
+ TIM4_IRQn = 30, /*!< TIM4 global Interrupt */
+ I2C1_EV_IRQn = 31, /*!< I2C1 Event Interrupt */
+ I2C1_ER_IRQn = 32, /*!< I2C1 Error Interrupt */
+ I2C2_EV_IRQn = 33, /*!< I2C2 Event Interrupt */
+ I2C2_ER_IRQn = 34, /*!< I2C2 Error Interrupt */
+ SPI1_IRQn = 35, /*!< SPI1 global Interrupt */
+ SPI2_IRQn = 36, /*!< SPI2 global Interrupt */
+ USART1_IRQn = 37, /*!< USART1 global Interrupt */
+ USART2_IRQn = 38, /*!< USART2 global Interrupt */
+ USART3_IRQn = 39, /*!< USART3 global Interrupt */
+ EXTI15_10_IRQn = 40, /*!< External Line[15:10] Interrupts */
+ RTC_Alarm_IRQn = 41, /*!< RTC Alarm (A and B) through EXTI Line Interrupt */
+ OTG_FS_WKUP_IRQn = 42, /*!< USB OTG FS Wakeup through EXTI line interrupt */
+ TIM8_BRK_TIM12_IRQn = 43, /*!< TIM8 Break Interrupt and TIM12 global interrupt */
+ TIM8_UP_TIM13_IRQn = 44, /*!< TIM8 Update Interrupt and TIM13 global interrupt */
+ TIM8_TRG_COM_TIM14_IRQn = 45, /*!< TIM8 Trigger and Commutation Interrupt and TIM14 global interrupt */
+ TIM8_CC_IRQn = 46, /*!< TIM8 Capture Compare Interrupt */
+ DMA1_Stream7_IRQn = 47, /*!< DMA1 Stream7 Interrupt */
+ FSMC_IRQn = 48, /*!< FSMC global Interrupt */
+ SDIO_IRQn = 49, /*!< SDIO global Interrupt */
+ TIM5_IRQn = 50, /*!< TIM5 global Interrupt */
+ SPI3_IRQn = 51, /*!< SPI3 global Interrupt */
+ UART4_IRQn = 52, /*!< UART4 global Interrupt */
+ UART5_IRQn = 53, /*!< UART5 global Interrupt */
+ TIM6_DAC_IRQn = 54, /*!< TIM6 global and DAC1&2 underrun error interrupts */
+ TIM7_IRQn = 55, /*!< TIM7 global interrupt */
+ DMA2_Stream0_IRQn = 56, /*!< DMA2 Stream 0 global Interrupt */
+ DMA2_Stream1_IRQn = 57, /*!< DMA2 Stream 1 global Interrupt */
+ DMA2_Stream2_IRQn = 58, /*!< DMA2 Stream 2 global Interrupt */
+ DMA2_Stream3_IRQn = 59, /*!< DMA2 Stream 3 global Interrupt */
+ DMA2_Stream4_IRQn = 60, /*!< DMA2 Stream 4 global Interrupt */
+ ETH_IRQn = 61, /*!< Ethernet global Interrupt */
+ ETH_WKUP_IRQn = 62, /*!< Ethernet Wakeup through EXTI line Interrupt */
+ CAN2_TX_IRQn = 63, /*!< CAN2 TX Interrupt */
+ CAN2_RX0_IRQn = 64, /*!< CAN2 RX0 Interrupt */
+ CAN2_RX1_IRQn = 65, /*!< CAN2 RX1 Interrupt */
+ CAN2_SCE_IRQn = 66, /*!< CAN2 SCE Interrupt */
+ OTG_FS_IRQn = 67, /*!< USB OTG FS global Interrupt */
+ DMA2_Stream5_IRQn = 68, /*!< DMA2 Stream 5 global interrupt */
+ DMA2_Stream6_IRQn = 69, /*!< DMA2 Stream 6 global interrupt */
+ DMA2_Stream7_IRQn = 70, /*!< DMA2 Stream 7 global interrupt */
+ USART6_IRQn = 71, /*!< USART6 global interrupt */
+ I2C3_EV_IRQn = 72, /*!< I2C3 event interrupt */
+ I2C3_ER_IRQn = 73, /*!< I2C3 error interrupt */
+ OTG_HS_EP1_OUT_IRQn = 74, /*!< USB OTG HS End Point 1 Out global interrupt */
+ OTG_HS_EP1_IN_IRQn = 75, /*!< USB OTG HS End Point 1 In global interrupt */
+ OTG_HS_WKUP_IRQn = 76, /*!< USB OTG HS Wakeup through EXTI interrupt */
+ OTG_HS_IRQn = 77, /*!< USB OTG HS global interrupt */
+ DCMI_IRQn = 78, /*!< DCMI global interrupt */
+ CRYP_IRQn = 79, /*!< CRYP crypto global interrupt */
+ HASH_RNG_IRQn = 80 /*!< Hash and Rng global interrupt */
+} IRQn_Type;
+
+/**
+ * @}
+ */
+
+#include "core_cm3.h"
+/* #include "system_stm32f2xx.h" */
+#include <stdint.h>
+
+/** @addtogroup Exported_types
+ * @{
+ */
+/*!< STM32F10x Standard Peripheral Library old types (maintained for legacy purpose) */
+typedef int32_t s32;
+typedef int16_t s16;
+typedef int8_t s8;
+
+typedef const int32_t sc32; /*!< Read Only */
+typedef const int16_t sc16; /*!< Read Only */
+typedef const int8_t sc8; /*!< Read Only */
+
+typedef __IO int32_t vs32;
+typedef __IO int16_t vs16;
+typedef __IO int8_t vs8;
+
+typedef __I int32_t vsc32; /*!< Read Only */
+typedef __I int16_t vsc16; /*!< Read Only */
+typedef __I int8_t vsc8; /*!< Read Only */
+
+typedef uint32_t u32;
+typedef uint16_t u16;
+typedef uint8_t u8;
+
+typedef const uint32_t uc32; /*!< Read Only */
+typedef const uint16_t uc16; /*!< Read Only */
+typedef const uint8_t uc8; /*!< Read Only */
+
+typedef __IO uint32_t vu32;
+typedef __IO uint16_t vu16;
+typedef __IO uint8_t vu8;
+
+typedef __I uint32_t vuc32; /*!< Read Only */
+typedef __I uint16_t vuc16; /*!< Read Only */
+typedef __I uint8_t vuc8; /*!< Read Only */
+
+typedef enum {RESET = 0, SET = !RESET} FlagStatus, ITStatus;
+
+typedef enum {DISABLE = 0, ENABLE = !DISABLE} FunctionalState;
+#define IS_FUNCTIONAL_STATE(STATE) (((STATE) == DISABLE) || ((STATE) == ENABLE))
+
+typedef enum {ERROR = 0, SUCCESS = !ERROR} ErrorStatus;
+
+/**
+ * @}
+ */
+
+/** @addtogroup Peripheral_registers_structures
+ * @{
+ */
+
+/**
+ * @brief Analog to Digital Converter
+ */
+
+typedef struct
+{
+ __IO uint32_t SR; /*!< ADC status register, Address offset: 0x00 */
+ __IO uint32_t CR1; /*!< ADC control register 1, Address offset: 0x04 */
+ __IO uint32_t CR2; /*!< ADC control register 2, Address offset: 0x08 */
+ __IO uint32_t SMPR1; /*!< ADC sample time register 1, Address offset: 0x0C */
+ __IO uint32_t SMPR2; /*!< ADC sample time register 2, Address offset: 0x10 */
+ __IO uint32_t JOFR1; /*!< ADC injected channel data offset register 1, Address offset: 0x14 */
+ __IO uint32_t JOFR2; /*!< ADC injected channel data offset register 2, Address offset: 0x18 */
+ __IO uint32_t JOFR3; /*!< ADC injected channel data offset register 3, Address offset: 0x1C */
+ __IO uint32_t JOFR4; /*!< ADC injected channel data offset register 4, Address offset: 0x20 */
+ __IO uint32_t HTR; /*!< ADC watchdog higher threshold register, Address offset: 0x24 */
+ __IO uint32_t LTR; /*!< ADC watchdog lower threshold register, Address offset: 0x28 */
+ __IO uint32_t SQR1; /*!< ADC regular sequence register 1, Address offset: 0x2C */
+ __IO uint32_t SQR2; /*!< ADC regular sequence register 2, Address offset: 0x30 */
+ __IO uint32_t SQR3; /*!< ADC regular sequence register 3, Address offset: 0x34 */
+ __IO uint32_t JSQR; /*!< ADC injected sequence register, Address offset: 0x38*/
+ __IO uint32_t JDR1; /*!< ADC injected data register 1, Address offset: 0x3C */
+ __IO uint32_t JDR2; /*!< ADC injected data register 2, Address offset: 0x40 */
+ __IO uint32_t JDR3; /*!< ADC injected data register 3, Address offset: 0x44 */
+ __IO uint32_t JDR4; /*!< ADC injected data register 4, Address offset: 0x48 */
+ __IO uint32_t DR; /*!< ADC regular data register, Address offset: 0x4C */
+} ADC_TypeDef;
+
+typedef struct
+{
+ __IO uint32_t CSR; /*!< ADC Common status register, Address offset: ADC1 base address + 0x300 */
+ __IO uint32_t CCR; /*!< ADC common control register, Address offset: ADC1 base address + 0x304 */
+ __IO uint32_t CDR; /*!< ADC common regular data register for dual
+ AND triple modes, Address offset: ADC1 base address + 0x308 */
+} ADC_Common_TypeDef;
+
+
+/**
+ * @brief Controller Area Network TxMailBox
+ */
+
+typedef struct
+{
+ __IO uint32_t TIR; /*!< CAN TX mailbox identifier register */
+ __IO uint32_t TDTR; /*!< CAN mailbox data length control and time stamp register */
+ __IO uint32_t TDLR; /*!< CAN mailbox data low register */
+ __IO uint32_t TDHR; /*!< CAN mailbox data high register */
+} CAN_TxMailBox_TypeDef;
+
+/**
+ * @brief Controller Area Network FIFOMailBox
+ */
+
+typedef struct
+{
+ __IO uint32_t RIR; /*!< CAN receive FIFO mailbox identifier register */
+ __IO uint32_t RDTR; /*!< CAN receive FIFO mailbox data length control and time stamp register */
+ __IO uint32_t RDLR; /*!< CAN receive FIFO mailbox data low register */
+ __IO uint32_t RDHR; /*!< CAN receive FIFO mailbox data high register */
+} CAN_FIFOMailBox_TypeDef;
+
+/**
+ * @brief Controller Area Network FilterRegister
+ */
+
+typedef struct
+{
+ __IO uint32_t FR1; /*!< CAN Filter bank register 1 */
+ __IO uint32_t FR2; /*!< CAN Filter bank register 1 */
+} CAN_FilterRegister_TypeDef;
+
+/**
+ * @brief Controller Area Network
+ */
+
+typedef struct
+{
+ __IO uint32_t MCR; /*!< CAN master control register, Address offset: 0x00 */
+ __IO uint32_t MSR; /*!< CAN master status register, Address offset: 0x04 */
+ __IO uint32_t TSR; /*!< CAN transmit status register, Address offset: 0x08 */
+ __IO uint32_t RF0R; /*!< CAN receive FIFO 0 register, Address offset: 0x0C */
+ __IO uint32_t RF1R; /*!< CAN receive FIFO 1 register, Address offset: 0x10 */
+ __IO uint32_t IER; /*!< CAN interrupt enable register, Address offset: 0x14 */
+ __IO uint32_t ESR; /*!< CAN error status register, Address offset: 0x18 */
+ __IO uint32_t BTR; /*!< CAN bit timing register, Address offset: 0x1C */
+ uint32_t RESERVED0[88]; /*!< Reserved, 0x020 - 0x17F */
+ CAN_TxMailBox_TypeDef sTxMailBox[3]; /*!< CAN Tx MailBox, Address offset: 0x180 - 0x1AC */
+ CAN_FIFOMailBox_TypeDef sFIFOMailBox[2]; /*!< CAN FIFO MailBox, Address offset: 0x1B0 - 0x1CC */
+ uint32_t RESERVED1[12]; /*!< Reserved, 0x1D0 - 0x1FF */
+ __IO uint32_t FMR; /*!< CAN filter master register, Address offset: 0x200 */
+ __IO uint32_t FM1R; /*!< CAN filter mode register, Address offset: 0x204 */
+ uint32_t RESERVED2; /*!< Reserved, 0x208 */
+ __IO uint32_t FS1R; /*!< CAN filter scale register, Address offset: 0x20C */
+ uint32_t RESERVED3; /*!< Reserved, 0x210 */
+ __IO uint32_t FFA1R; /*!< CAN filter FIFO assignment register, Address offset: 0x214 */
+ uint32_t RESERVED4; /*!< Reserved, 0x218 */
+ __IO uint32_t FA1R; /*!< CAN filter activation register, Address offset: 0x21C */
+ uint32_t RESERVED5[8]; /*!< Reserved, 0x220-0x23F */
+ CAN_FilterRegister_TypeDef sFilterRegister[28]; /*!< CAN Filter Register, Address offset: 0x240-0x31C */
+} CAN_TypeDef;
+
+/**
+ * @brief CRC calculation unit
+ */
+
+typedef struct
+{
+ __IO uint32_t DR; /*!< CRC Data register, Address offset: 0x00 */
+ __IO uint8_t IDR; /*!< CRC Independent data register, Address offset: 0x04 */
+ uint8_t RESERVED0; /*!< Reserved, 0x05 */
+ uint16_t RESERVED1; /*!< Reserved, 0x06 */
+ __IO uint32_t CR; /*!< CRC Control register, Address offset: 0x08 */
+} CRC_TypeDef;
+
+/**
+ * @brief Digital to Analog Converter
+ */
+
+typedef struct
+{
+ __IO uint32_t CR; /*!< DAC control register, Address offset: 0x00 */
+ __IO uint32_t SWTRIGR; /*!< DAC software trigger register, Address offset: 0x04 */
+ __IO uint32_t DHR12R1; /*!< DAC channel1 12-bit right-aligned data holding register, Address offset: 0x08 */
+ __IO uint32_t DHR12L1; /*!< DAC channel1 12-bit left aligned data holding register, Address offset: 0x0C */
+ __IO uint32_t DHR8R1; /*!< DAC channel1 8-bit right aligned data holding register, Address offset: 0x10 */
+ __IO uint32_t DHR12R2; /*!< DAC channel2 12-bit right aligned data holding register, Address offset: 0x14 */
+ __IO uint32_t DHR12L2; /*!< DAC channel2 12-bit left aligned data holding register, Address offset: 0x18 */
+ __IO uint32_t DHR8R2; /*!< DAC channel2 8-bit right-aligned data holding register, Address offset: 0x1C */
+ __IO uint32_t DHR12RD; /*!< Dual DAC 12-bit right-aligned data holding register, Address offset: 0x20 */
+ __IO uint32_t DHR12LD; /*!< DUAL DAC 12-bit left aligned data holding register, Address offset: 0x24 */
+ __IO uint32_t DHR8RD; /*!< DUAL DAC 8-bit right aligned data holding register, Address offset: 0x28 */
+ __IO uint32_t DOR1; /*!< DAC channel1 data output register, Address offset: 0x2C */
+ __IO uint32_t DOR2; /*!< DAC channel2 data output register, Address offset: 0x30 */
+ __IO uint32_t SR; /*!< DAC status register, Address offset: 0x34 */
+} DAC_TypeDef;
+
+/**
+ * @brief Debug MCU
+ */
+
+typedef struct
+{
+ __IO uint32_t IDCODE; /*!< MCU device ID code, Address offset: 0x00 */
+ __IO uint32_t CR; /*!< Debug MCU configuration register, Address offset: 0x04 */
+ __IO uint32_t APB1FZ; /*!< Debug MCU APB1 freeze register, Address offset: 0x08 */
+ __IO uint32_t APB2FZ; /*!< Debug MCU APB2 freeze register, Address offset: 0x0C */
+}DBGMCU_TypeDef;
+
+/**
+ * @brief DCMI
+ */
+
+typedef struct
+{
+ __IO uint32_t CR; /*!< DCMI control register 1, Address offset: 0x00 */
+ __IO uint32_t SR; /*!< DCMI status register, Address offset: 0x04 */
+ __IO uint32_t RISR; /*!< DCMI raw interrupt status register, Address offset: 0x08 */
+ __IO uint32_t IER; /*!< DCMI interrupt enable register, Address offset: 0x0C */
+ __IO uint32_t MISR; /*!< DCMI masked interrupt status register, Address offset: 0x10 */
+ __IO uint32_t ICR; /*!< DCMI interrupt clear register, Address offset: 0x14 */
+ __IO uint32_t ESCR; /*!< DCMI embedded synchronization code register, Address offset: 0x18 */
+ __IO uint32_t ESUR; /*!< DCMI embedded synchronization unmask register, Address offset: 0x1C */
+ __IO uint32_t CWSTRTR; /*!< DCMI crop window start, Address offset: 0x20 */
+ __IO uint32_t CWSIZER; /*!< DCMI crop window size, Address offset: 0x24 */
+ __IO uint32_t DR; /*!< DCMI data register, Address offset: 0x28 */
+} DCMI_TypeDef;
+
+/**
+ * @brief DMA Controller
+ */
+
+typedef struct
+{
+ __IO uint32_t CR; /*!< DMA stream x configuration register */
+ __IO uint32_t NDTR; /*!< DMA stream x number of data register */
+ __IO uint32_t PAR; /*!< DMA stream x peripheral address register */
+ __IO uint32_t M0AR; /*!< DMA stream x memory 0 address register */
+ __IO uint32_t M1AR; /*!< DMA stream x memory 1 address register */
+ __IO uint32_t FCR; /*!< DMA stream x FIFO control register */
+} DMA_Stream_TypeDef;
+
+typedef struct
+{
+ __IO uint32_t LISR; /*!< DMA low interrupt status register, Address offset: 0x00 */
+ __IO uint32_t HISR; /*!< DMA high interrupt status register, Address offset: 0x04 */
+ __IO uint32_t LIFCR; /*!< DMA low interrupt flag clear register, Address offset: 0x08 */
+ __IO uint32_t HIFCR; /*!< DMA high interrupt flag clear register, Address offset: 0x0C */
+} DMA_TypeDef;
+
+/**
+ * @brief Ethernet MAC
+ */
+
+typedef struct
+{
+ __IO uint32_t MACCR;
+ __IO uint32_t MACFFR;
+ __IO uint32_t MACHTHR;
+ __IO uint32_t MACHTLR;
+ __IO uint32_t MACMIIAR;
+ __IO uint32_t MACMIIDR;
+ __IO uint32_t MACFCR;
+ __IO uint32_t MACVLANTR; /* 8 */
+ uint32_t RESERVED0[2];
+ __IO uint32_t MACRWUFFR; /* 11 */
+ __IO uint32_t MACPMTCSR;
+ uint32_t RESERVED1[2];
+ __IO uint32_t MACSR; /* 15 */
+ __IO uint32_t MACIMR;
+ __IO uint32_t MACA0HR;
+ __IO uint32_t MACA0LR;
+ __IO uint32_t MACA1HR;
+ __IO uint32_t MACA1LR;
+ __IO uint32_t MACA2HR;
+ __IO uint32_t MACA2LR;
+ __IO uint32_t MACA3HR;
+ __IO uint32_t MACA3LR; /* 24 */
+ uint32_t RESERVED2[40];
+ __IO uint32_t MMCCR; /* 65 */
+ __IO uint32_t MMCRIR;
+ __IO uint32_t MMCTIR;
+ __IO uint32_t MMCRIMR;
+ __IO uint32_t MMCTIMR; /* 69 */
+ uint32_t RESERVED3[14];
+ __IO uint32_t MMCTGFSCCR; /* 84 */
+ __IO uint32_t MMCTGFMSCCR;
+ uint32_t RESERVED4[5];
+ __IO uint32_t MMCTGFCR;
+ uint32_t RESERVED5[10];
+ __IO uint32_t MMCRFCECR;
+ __IO uint32_t MMCRFAECR;
+ uint32_t RESERVED6[10];
+ __IO uint32_t MMCRGUFCR;
+ uint32_t RESERVED7[334];
+ __IO uint32_t PTPTSCR;
+ __IO uint32_t PTPSSIR;
+ __IO uint32_t PTPTSHR;
+ __IO uint32_t PTPTSLR;
+ __IO uint32_t PTPTSHUR;
+ __IO uint32_t PTPTSLUR;
+ __IO uint32_t PTPTSAR;
+ __IO uint32_t PTPTTHR;
+ __IO uint32_t PTPTTLR;
+ __IO uint32_t RESERVED8;
+ __IO uint32_t PTPTSSR; /* added for STM32F2xx */
+ uint32_t RESERVED9[565];
+ __IO uint32_t DMABMR;
+ __IO uint32_t DMATPDR;
+ __IO uint32_t DMARPDR;
+ __IO uint32_t DMARDLAR;
+ __IO uint32_t DMATDLAR;
+ __IO uint32_t DMASR;
+ __IO uint32_t DMAOMR;
+ __IO uint32_t DMAIER;
+ __IO uint32_t DMAMFBOCR;
+ __IO uint32_t DMARSWTR; /* added for STM32F2xx */
+ uint32_t RESERVED10[8];
+ __IO uint32_t DMACHTDR;
+ __IO uint32_t DMACHRDR;
+ __IO uint32_t DMACHTBAR;
+ __IO uint32_t DMACHRBAR;
+} ETH_TypeDef;
+
+/**
+ * @brief External Interrupt/Event Controller
+ */
+
+typedef struct
+{
+ __IO uint32_t IMR; /*!< EXTI Interrupt mask register, Address offset: 0x00 */
+ __IO uint32_t EMR; /*!< EXTI Event mask register, Address offset: 0x04 */
+ __IO uint32_t RTSR; /*!< EXTI Rising trigger selection register, Address offset: 0x08 */
+ __IO uint32_t FTSR; /*!< EXTI Falling trigger selection register, Address offset: 0x0C */
+ __IO uint32_t SWIER; /*!< EXTI Software interrupt event register, Address offset: 0x10 */
+ __IO uint32_t PR; /*!< EXTI Pending register, Address offset: 0x14 */
+} EXTI_TypeDef;
+
+/**
+ * @brief FLASH Registers
+ */
+
+typedef struct
+{
+ __IO uint32_t ACR; /*!< FLASH access control register, Address offset: 0x00 */
+ __IO uint32_t KEYR; /*!< FLASH key register, Address offset: 0x04 */
+ __IO uint32_t OPTKEYR; /*!< FLASH option key register, Address offset: 0x08 */
+ __IO uint32_t SR; /*!< FLASH status register, Address offset: 0x0C */
+ __IO uint32_t CR; /*!< FLASH control register, Address offset: 0x10 */
+ __IO uint32_t OPTCR; /*!< FLASH option control register, Address offset: 0x14 */
+} FLASH_TypeDef;
+
+/**
+ * @brief Flexible Static Memory Controller
+ */
+
+typedef struct
+{
+ __IO uint32_t BTCR[8]; /*!< NOR/PSRAM chip-select control register(BCR) and chip-select timing register(BTR), Address offset: 0x00-1C */
+} FSMC_Bank1_TypeDef;
+
+/**
+ * @brief Flexible Static Memory Controller Bank1E
+ */
+
+typedef struct
+{
+ __IO uint32_t BWTR[7]; /*!< NOR/PSRAM write timing registers, Address offset: 0x104-0x11C */
+} FSMC_Bank1E_TypeDef;
+
+/**
+ * @brief Flexible Static Memory Controller Bank2
+ */
+
+typedef struct
+{
+ __IO uint32_t PCR2; /*!< NAND Flash control register 2, Address offset: 0x60 */
+ __IO uint32_t SR2; /*!< NAND Flash FIFO status and interrupt register 2, Address offset: 0x64 */
+ __IO uint32_t PMEM2; /*!< NAND Flash Common memory space timing register 2, Address offset: 0x68 */
+ __IO uint32_t PATT2; /*!< NAND Flash Attribute memory space timing register 2, Address offset: 0x6C */
+ uint32_t RESERVED0; /*!< Reserved, 0x70 */
+ __IO uint32_t ECCR2; /*!< NAND Flash ECC result registers 2, Address offset: 0x74 */
+} FSMC_Bank2_TypeDef;
+
+/**
+ * @brief Flexible Static Memory Controller Bank3
+ */
+
+typedef struct
+{
+ __IO uint32_t PCR3; /*!< NAND Flash control register 3, Address offset: 0x80 */
+ __IO uint32_t SR3; /*!< NAND Flash FIFO status and interrupt register 3, Address offset: 0x84 */
+ __IO uint32_t PMEM3; /*!< NAND Flash Common memory space timing register 3, Address offset: 0x88 */
+ __IO uint32_t PATT3; /*!< NAND Flash Attribute memory space timing register 3, Address offset: 0x8C */
+ uint32_t RESERVED0; /*!< Reserved, 0x90 */
+ __IO uint32_t ECCR3; /*!< NAND Flash ECC result registers 3, Address offset: 0x94 */
+} FSMC_Bank3_TypeDef;
+
+/**
+ * @brief Flexible Static Memory Controller Bank4
+ */
+
+typedef struct
+{
+ __IO uint32_t PCR4; /*!< PC Card control register 4, Address offset: 0xA0 */
+ __IO uint32_t SR4; /*!< PC Card FIFO status and interrupt register 4, Address offset: 0xA4 */
+ __IO uint32_t PMEM4; /*!< PC Card Common memory space timing register 4, Address offset: 0xA8 */
+ __IO uint32_t PATT4; /*!< PC Card Attribute memory space timing register 4, Address offset: 0xAC */
+ __IO uint32_t PIO4; /*!< PC Card I/O space timing register 4, Address offset: 0xB0 */
+} FSMC_Bank4_TypeDef;
+
+/**
+ * @brief General Purpose I/O
+ */
+#if 0
+typedef struct
+{
+ __IO uint32_t MODER; /*!< GPIO port mode register, Address offset: 0x00 */
+ __IO uint32_t OTYPER; /*!< GPIO port output type register, Address offset: 0x04 */
+ __IO uint32_t OSPEEDR; /*!< GPIO port output speed register, Address offset: 0x08 */
+ __IO uint32_t PUPDR; /*!< GPIO port pull-up/pull-down register, Address offset: 0x0C */
+ __IO uint32_t IDR; /*!< GPIO port input data register, Address offset: 0x10 */
+ __IO uint32_t ODR; /*!< GPIO port output data register, Address offset: 0x14 */
+ __IO uint16_t BSRRL; /*!< GPIO port bit set/reset low register, Address offset: 0x18 */
+ __IO uint16_t BSRRH; /*!< GPIO port bit set/reset high register, Address offset: 0x1A */
+ __IO uint32_t LCKR; /*!< GPIO port configuration lock register, Address offset: 0x1C */
+ __IO uint32_t AFR[2]; /*!< GPIO alternate function registers, Address offset: 0x24-0x28 */
+} GPIO_TypeDef;
+#endif
+/**
+ * @brief System configuration controller
+ */
+
+typedef struct
+{
+ __IO uint32_t MEMRMP; /*!< SYSCFG memory remap register, Address offset: 0x00 */
+ __IO uint32_t PMC; /*!< SYSCFG peripheral mode configuration register, Address offset: 0x04 */
+ __IO uint32_t EXTICR[4]; /*!< SYSCFG external interrupt configuration registers, Address offset: 0x08-0x14 */
+ uint32_t RESERVED[2]; /*!< Reserved, 0x18-0x1C */
+ __IO uint32_t CMPCR; /*!< SYSCFG Compensation cell control register, Address offset: 0x20 */
+} SYSCFG_TypeDef;
+
+/**
+ * @brief Inter-integrated Circuit Interface
+ */
+
+typedef struct
+{
+ __IO uint16_t CR1; /*!< I2C Control register 1, Address offset: 0x00 */
+ uint16_t RESERVED0; /*!< Reserved, 0x02 */
+ __IO uint16_t CR2; /*!< I2C Control register 2, Address offset: 0x04 */
+ uint16_t RESERVED1; /*!< Reserved, 0x06 */
+ __IO uint16_t OAR1; /*!< I2C Own address register 1, Address offset: 0x08 */
+ uint16_t RESERVED2; /*!< Reserved, 0x0A */
+ __IO uint16_t OAR2; /*!< I2C Own address register 2, Address offset: 0x0C */
+ uint16_t RESERVED3; /*!< Reserved, 0x0E */
+ __IO uint16_t DR; /*!< I2C Data register, Address offset: 0x10 */
+ uint16_t RESERVED4; /*!< Reserved, 0x12 */
+ __IO uint16_t SR1; /*!< I2C Status register 1, Address offset: 0x14 */
+ uint16_t RESERVED5; /*!< Reserved, 0x16 */
+ __IO uint16_t SR2; /*!< I2C Status register 2, Address offset: 0x18 */
+ uint16_t RESERVED6; /*!< Reserved, 0x1A */
+ __IO uint16_t CCR; /*!< I2C Clock control register, Address offset: 0x1C */
+ uint16_t RESERVED7; /*!< Reserved, 0x1E */
+ __IO uint16_t TRISE; /*!< I2C TRISE register, Address offset: 0x20 */
+ uint16_t RESERVED8; /*!< Reserved, 0x22 */
+} I2C_TypeDef;
+
+/**
+ * @brief Independent WATCHDOG
+ */
+
+typedef struct
+{
+ __IO uint32_t KR; /*!< IWDG Key register, Address offset: 0x00 */
+ __IO uint32_t PR; /*!< IWDG Prescaler register, Address offset: 0x04 */
+ __IO uint32_t RLR; /*!< IWDG Reload register, Address offset: 0x08 */
+ __IO uint32_t SR; /*!< IWDG Status register, Address offset: 0x0C */
+} IWDG_TypeDef;
+
+/**
+ * @brief Power Control
+ */
+
+typedef struct
+{
+ __IO uint32_t CR; /*!< PWR power control register, Address offset: 0x00 */
+ __IO uint32_t CSR; /*!< PWR power control/status register, Address offset: 0x04 */
+} PWR_TypeDef;
+
+/**
+ * @brief Reset and Clock Control
+ */
+
+typedef struct
+{
+ __IO uint32_t CR; /*!< RCC clock control register, Address offset: 0x00 */
+ __IO uint32_t PLLCFGR; /*!< RCC PLL configuration register, Address offset: 0x04 */
+ __IO uint32_t CFGR; /*!< RCC clock configuration register, Address offset: 0x08 */
+ __IO uint32_t CIR; /*!< RCC clock interrupt register, Address offset: 0x0C */
+ __IO uint32_t AHB1RSTR; /*!< RCC AHB1 peripheral reset register, Address offset: 0x10 */
+ __IO uint32_t AHB2RSTR; /*!< RCC AHB2 peripheral reset register, Address offset: 0x14 */
+ __IO uint32_t AHB3RSTR; /*!< RCC AHB3 peripheral reset register, Address offset: 0x18 */
+ uint32_t RESERVED0; /*!< Reserved, 0x1C */
+ __IO uint32_t APB1RSTR; /*!< RCC APB1 peripheral reset register, Address offset: 0x20 */
+ __IO uint32_t APB2RSTR; /*!< RCC APB2 peripheral reset register, Address offset: 0x24 */
+ uint32_t RESERVED1[2]; /*!< Reserved, 0x28-0x2C */
+ __IO uint32_t AHB1ENR; /*!< RCC AHB1 peripheral clock register, Address offset: 0x30 */
+ __IO uint32_t AHB2ENR; /*!< RCC AHB2 peripheral clock register, Address offset: 0x34 */
+ __IO uint32_t AHB3ENR; /*!< RCC AHB3 peripheral clock register, Address offset: 0x38 */
+ uint32_t RESERVED2; /*!< Reserved, 0x3C */
+ __IO uint32_t APB1ENR; /*!< RCC APB1 peripheral clock enable register, Address offset: 0x40 */
+ __IO uint32_t APB2ENR; /*!< RCC APB2 peripheral clock enable register, Address offset: 0x44 */
+ uint32_t RESERVED3[2]; /*!< Reserved, 0x48-0x4C */
+ __IO uint32_t AHB1LPENR; /*!< RCC AHB1 peripheral clock enable in low power mode register, Address offset: 0x50 */
+ __IO uint32_t AHB2LPENR; /*!< RCC AHB2 peripheral clock enable in low power mode register, Address offset: 0x54 */
+ __IO uint32_t AHB3LPENR; /*!< RCC AHB3 peripheral clock enable in low power mode register, Address offset: 0x58 */
+ uint32_t RESERVED4; /*!< Reserved, 0x5C */
+ __IO uint32_t APB1LPENR; /*!< RCC APB1 peripheral clock enable in low power mode register, Address offset: 0x60 */
+ __IO uint32_t APB2LPENR; /*!< RCC APB2 peripheral clock enable in low power mode register, Address offset: 0x64 */
+ uint32_t RESERVED5[2]; /*!< Reserved, 0x68-0x6C */
+ __IO uint32_t BDCR; /*!< RCC Backup domain control register, Address offset: 0x70 */
+ __IO uint32_t CSR; /*!< RCC clock control & status register, Address offset: 0x74 */
+ uint32_t RESERVED6[2]; /*!< Reserved, 0x78-0x7C */
+ __IO uint32_t SSCGR; /*!< RCC spread spectrum clock generation register, Address offset: 0x80 */
+ __IO uint32_t PLLI2SCFGR; /*!< RCC PLLI2S configuration register, Address offset: 0x84 */
+} RCC_TypeDef;
+
+/**
+ * @brief Real-Time Clock
+ */
+
+typedef struct
+{
+ __IO uint32_t TR; /*!< RTC time register, Address offset: 0x00 */
+ __IO uint32_t DR; /*!< RTC date register, Address offset: 0x04 */
+ __IO uint32_t CR; /*!< RTC control register, Address offset: 0x08 */
+ __IO uint32_t ISR; /*!< RTC initialization and status register, Address offset: 0x0C */
+ __IO uint32_t PRER; /*!< RTC prescaler register, Address offset: 0x10 */
+ __IO uint32_t WUTR; /*!< RTC wakeup timer register, Address offset: 0x14 */
+ __IO uint32_t CALIBR; /*!< RTC calibration register, Address offset: 0x18 */
+ __IO uint32_t ALRMAR; /*!< RTC alarm A register, Address offset: 0x1C */
+ __IO uint32_t ALRMBR; /*!< RTC alarm B register, Address offset: 0x20 */
+ __IO uint32_t WPR; /*!< RTC write protection register, Address offset: 0x24 */
+ uint32_t RESERVED1; /*!< Reserved, 0x28 */
+ uint32_t RESERVED2; /*!< Reserved, 0x2C */
+ __IO uint32_t TSTR; /*!< RTC time stamp time register, Address offset: 0x30 */
+ __IO uint32_t TSDR; /*!< RTC time stamp date register, Address offset: 0x34 */
+ uint32_t RESERVED3; /*!< Reserved, 0x38 */
+ uint32_t RESERVED4; /*!< Reserved, 0x3C */
+ __IO uint32_t TAFCR; /*!< RTC tamper and alternate function configuration register, Address offset: 0x40 */
+ uint32_t RESERVED5; /*!< Reserved, 0x44 */
+ uint32_t RESERVED6; /*!< Reserved, 0x48 */
+ uint32_t RESERVED7; /*!< Reserved, 0x4C */
+ __IO uint32_t BKP0R; /*!< RTC backup register 1, Address offset: 0x50 */
+ __IO uint32_t BKP1R; /*!< RTC backup register 1, Address offset: 0x54 */
+ __IO uint32_t BKP2R; /*!< RTC backup register 2, Address offset: 0x58 */
+ __IO uint32_t BKP3R; /*!< RTC backup register 3, Address offset: 0x5C */
+ __IO uint32_t BKP4R; /*!< RTC backup register 4, Address offset: 0x60 */
+ __IO uint32_t BKP5R; /*!< RTC backup register 5, Address offset: 0x64 */
+ __IO uint32_t BKP6R; /*!< RTC backup register 6, Address offset: 0x68 */
+ __IO uint32_t BKP7R; /*!< RTC backup register 7, Address offset: 0x6C */
+ __IO uint32_t BKP8R; /*!< RTC backup register 8, Address offset: 0x70 */
+ __IO uint32_t BKP9R; /*!< RTC backup register 9, Address offset: 0x74 */
+ __IO uint32_t BKP10R; /*!< RTC backup register 10, Address offset: 0x78 */
+ __IO uint32_t BKP11R; /*!< RTC backup register 11, Address offset: 0x7C */
+ __IO uint32_t BKP12R; /*!< RTC backup register 12, Address offset: 0x80 */
+ __IO uint32_t BKP13R; /*!< RTC backup register 13, Address offset: 0x84 */
+ __IO uint32_t BKP14R; /*!< RTC backup register 14, Address offset: 0x88 */
+ __IO uint32_t BKP15R; /*!< RTC backup register 15, Address offset: 0x8C */
+ __IO uint32_t BKP16R; /*!< RTC backup register 16, Address offset: 0x90 */
+ __IO uint32_t BKP17R; /*!< RTC backup register 17, Address offset: 0x94 */
+ __IO uint32_t BKP18R; /*!< RTC backup register 18, Address offset: 0x98 */
+ __IO uint32_t BKP19R; /*!< RTC backup register 19, Address offset: 0x9C */
+} RTC_TypeDef;
+
+/**
+ * @brief SD host Interface
+ */
+
+typedef struct
+{
+ __IO uint32_t POWER; /*!< SDIO power control register, Address offset: 0x00 */
+ __IO uint32_t CLKCR; /*!< SDI clock control register, Address offset: 0x04 */
+ __IO uint32_t ARG; /*!< SDIO argument register, Address offset: 0x08 */
+ __IO uint32_t CMD; /*!< SDIO command register, Address offset: 0x0C */
+ __I uint32_t RESPCMD; /*!< SDIO command response register, Address offset: 0x10 */
+ __I uint32_t RESP1; /*!< SDIO response 1 register, Address offset: 0x14 */
+ __I uint32_t RESP2; /*!< SDIO response 2 register, Address offset: 0x18 */
+ __I uint32_t RESP3; /*!< SDIO response 3 register, Address offset: 0x1C */
+ __I uint32_t RESP4; /*!< SDIO response 4 register, Address offset: 0x20 */
+ __IO uint32_t DTIMER; /*!< SDIO data timer register, Address offset: 0x24 */
+ __IO uint32_t DLEN; /*!< SDIO data length register, Address offset: 0x28 */
+ __IO uint32_t DCTRL; /*!< SDIO data control register, Address offset: 0x2C */
+ __I uint32_t DCOUNT; /*!< SDIO data counter register, Address offset: 0x30 */
+ __I uint32_t STA; /*!< SDIO status register, Address offset: 0x34 */
+ __IO uint32_t ICR; /*!< SDIO interrupt clear register, Address offset: 0x38 */
+ __IO uint32_t MASK; /*!< SDIO mask register, Address offset: 0x3C */
+ uint32_t RESERVED0[2]; /*!< Reserved, 0x40-0x44 */
+ __I uint32_t FIFOCNT; /*!< SDIO FIFO counter register, Address offset: 0x48 */
+ uint32_t RESERVED1[13]; /*!< Reserved, 0x4C-0x7C */
+ __IO uint32_t FIFO; /*!< SDIO data FIFO register, Address offset: 0x80 */
+} SDIO_TypeDef;
+
+/**
+ * @brief Serial Peripheral Interface
+ */
+
+typedef struct
+{
+ __IO uint16_t CR1; /*!< SPI control register 1 (not used in I2S mode), Address offset: 0x00 */
+ uint16_t RESERVED0; /*!< Reserved, 0x02 */
+ __IO uint16_t CR2; /*!< SPI control register 2, Address offset: 0x04 */
+ uint16_t RESERVED1; /*!< Reserved, 0x06 */
+ __IO uint16_t SR; /*!< SPI status register, Address offset: 0x08 */
+ uint16_t RESERVED2; /*!< Reserved, 0x0A */
+ __IO uint16_t DR; /*!< SPI data register, Address offset: 0x0C */
+ uint16_t RESERVED3; /*!< Reserved, 0x0E */
+ __IO uint16_t CRCPR; /*!< SPI CRC polynomial register (not used in I2S mode), Address offset: 0x10 */
+ uint16_t RESERVED4; /*!< Reserved, 0x12 */
+ __IO uint16_t RXCRCR; /*!< SPI RX CRC register (not used in I2S mode), Address offset: 0x14 */
+ uint16_t RESERVED5; /*!< Reserved, 0x16 */
+ __IO uint16_t TXCRCR; /*!< SPI TX CRC register (not used in I2S mode), Address offset: 0x18 */
+ uint16_t RESERVED6; /*!< Reserved, 0x1A */
+ __IO uint16_t I2SCFGR; /*!< SPI_I2S configuration register, Address offset: 0x1C */
+ uint16_t RESERVED7; /*!< Reserved, 0x1E */
+ __IO uint16_t I2SPR; /*!< SPI_I2S prescaler register, Address offset: 0x20 */
+ uint16_t RESERVED8; /*!< Reserved, 0x22 */
+} SPI_TypeDef;
+
+/**
+ * @brief TIM
+ */
+
+typedef struct
+{
+ __IO uint16_t CR1; /*!< TIM control register 1, Address offset: 0x00 */
+ uint16_t RESERVED0; /*!< Reserved, 0x02 */
+ __IO uint16_t CR2; /*!< TIM control register 2, Address offset: 0x04 */
+ uint16_t RESERVED1; /*!< Reserved, 0x06 */
+ __IO uint16_t SMCR; /*!< TIM slave mode control register, Address offset: 0x08 */
+ uint16_t RESERVED2; /*!< Reserved, 0x0A */
+ __IO uint16_t DIER; /*!< TIM DMA/interrupt enable register, Address offset: 0x0C */
+ uint16_t RESERVED3; /*!< Reserved, 0x0E */
+ __IO uint16_t SR; /*!< TIM status register, Address offset: 0x10 */
+ uint16_t RESERVED4; /*!< Reserved, 0x12 */
+ __IO uint16_t EGR; /*!< TIM event generation register, Address offset: 0x14 */
+ uint16_t RESERVED5; /*!< Reserved, 0x16 */
+ __IO uint16_t CCMR1; /*!< TIM capture/compare mode register 1, Address offset: 0x18 */
+ uint16_t RESERVED6; /*!< Reserved, 0x1A */
+ __IO uint16_t CCMR2; /*!< TIM capture/compare mode register 2, Address offset: 0x1C */
+ uint16_t RESERVED7; /*!< Reserved, 0x1E */
+ __IO uint16_t CCER; /*!< TIM capture/compare enable register, Address offset: 0x20 */
+ uint16_t RESERVED8; /*!< Reserved, 0x22 */
+ __IO uint32_t CNT; /*!< TIM counter register, Address offset: 0x24 */
+ __IO uint16_t PSC; /*!< TIM prescaler, Address offset: 0x28 */
+ uint16_t RESERVED9; /*!< Reserved, 0x2A */
+ __IO uint32_t ARR; /*!< TIM auto-reload register, Address offset: 0x2C */
+ __IO uint16_t RCR; /*!< TIM repetition counter register, Address offset: 0x30 */
+ uint16_t RESERVED10; /*!< Reserved, 0x32 */
+ __IO uint32_t CCR1; /*!< TIM capture/compare register 1, Address offset: 0x34 */
+ __IO uint32_t CCR2; /*!< TIM capture/compare register 2, Address offset: 0x38 */
+ __IO uint32_t CCR3; /*!< TIM capture/compare register 3, Address offset: 0x3C */
+ __IO uint32_t CCR4; /*!< TIM capture/compare register 4, Address offset: 0x40 */
+ __IO uint16_t BDTR; /*!< TIM break and dead-time register, Address offset: 0x44 */
+ uint16_t RESERVED11; /*!< Reserved, 0x46 */
+ __IO uint16_t DCR; /*!< TIM DMA control register, Address offset: 0x48 */
+ uint16_t RESERVED12; /*!< Reserved, 0x4A */
+ __IO uint16_t DMAR; /*!< TIM DMA address for full transfer, Address offset: 0x4C */
+ uint16_t RESERVED13; /*!< Reserved, 0x4E */
+ __IO uint16_t OR; /*!< TIM option register, Address offset: 0x50 */
+ uint16_t RESERVED14; /*!< Reserved, 0x52 */
+} TIM_TypeDef;
+
+/**
+ * @brief Universal Synchronous Asynchronous Receiver Transmitter
+ */
+
+typedef struct
+{
+ __IO uint16_t SR; /*!< USART Status register, Address offset: 0x00 */
+ uint16_t RESERVED0; /*!< Reserved, 0x02 */
+ __IO uint16_t DR; /*!< USART Data register, Address offset: 0x04 */
+ uint16_t RESERVED1; /*!< Reserved, 0x06 */
+ __IO uint16_t BRR; /*!< USART Baud rate register, Address offset: 0x08 */
+ uint16_t RESERVED2; /*!< Reserved, 0x0A */
+ __IO uint16_t CR1; /*!< USART Control register 1, Address offset: 0x0C */
+ uint16_t RESERVED3; /*!< Reserved, 0x0E */
+ __IO uint16_t CR2; /*!< USART Control register 2, Address offset: 0x10 */
+ uint16_t RESERVED4; /*!< Reserved, 0x12 */
+ __IO uint16_t CR3; /*!< USART Control register 3, Address offset: 0x14 */
+ uint16_t RESERVED5; /*!< Reserved, 0x16 */
+ __IO uint16_t GTPR; /*!< USART Guard time and prescaler register, Address offset: 0x18 */
+ uint16_t RESERVED6; /*!< Reserved, 0x1A */
+} USART_TypeDef;
+
+/**
+ * @brief Window WATCHDOG
+ */
+
+typedef struct
+{
+ __IO uint32_t CR; /*!< WWDG Control register, Address offset: 0x00 */
+ __IO uint32_t CFR; /*!< WWDG Configuration register, Address offset: 0x04 */
+ __IO uint32_t SR; /*!< WWDG Status register, Address offset: 0x08 */
+} WWDG_TypeDef;
+
+/**
+ * @brief Crypto Processor
+ */
+
+typedef struct
+{
+ __IO uint32_t CR; /*!< CRYP control register, Address offset: 0x00 */
+ __IO uint32_t SR; /*!< CRYP status register, Address offset: 0x04 */
+ __IO uint32_t DR; /*!< CRYP data input register, Address offset: 0x08 */
+ __IO uint32_t DOUT; /*!< CRYP data output register, Address offset: 0x0C */
+ __IO uint32_t DMACR; /*!< CRYP DMA control register, Address offset: 0x10 */
+ __IO uint32_t IMSCR; /*!< CRYP interrupt mask set/clear register, Address offset: 0x14 */
+ __IO uint32_t RISR; /*!< CRYP raw interrupt status register, Address offset: 0x18 */
+ __IO uint32_t MISR; /*!< CRYP masked interrupt status register, Address offset: 0x1C */
+ __IO uint32_t K0LR; /*!< CRYP key left register 0, Address offset: 0x20 */
+ __IO uint32_t K0RR; /*!< CRYP key right register 0, Address offset: 0x24 */
+ __IO uint32_t K1LR; /*!< CRYP key left register 1, Address offset: 0x28 */
+ __IO uint32_t K1RR; /*!< CRYP key right register 1, Address offset: 0x2C */
+ __IO uint32_t K2LR; /*!< CRYP key left register 2, Address offset: 0x30 */
+ __IO uint32_t K2RR; /*!< CRYP key right register 2, Address offset: 0x34 */
+ __IO uint32_t K3LR; /*!< CRYP key left register 3, Address offset: 0x38 */
+ __IO uint32_t K3RR; /*!< CRYP key right register 3, Address offset: 0x3C */
+ __IO uint32_t IV0LR; /*!< CRYP initialization vector left-word register 0, Address offset: 0x40 */
+ __IO uint32_t IV0RR; /*!< CRYP initialization vector right-word register 0, Address offset: 0x44 */
+ __IO uint32_t IV1LR; /*!< CRYP initialization vector left-word register 1, Address offset: 0x48 */
+ __IO uint32_t IV1RR; /*!< CRYP initialization vector right-word register 1, Address offset: 0x4C */
+} CRYP_TypeDef;
+
+/**
+ * @brief HASH
+ */
+
+typedef struct
+{
+ __IO uint32_t CR; /*!< HASH control register, Address offset: 0x00 */
+ __IO uint32_t DIN; /*!< HASH data input register, Address offset: 0x04 */
+ __IO uint32_t STR; /*!< HASH start register, Address offset: 0x08 */
+ __IO uint32_t HR[5]; /*!< HASH digest registers, Address offset: 0x0C-0x1C */
+ __IO uint32_t IMR; /*!< HASH interrupt enable register, Address offset: 0x20 */
+ __IO uint32_t SR; /*!< HASH status register, Address offset: 0x24 */
+ uint32_t RESERVED[52]; /*!< Reserved, 0x28-0xF4 */
+ __IO uint32_t CSR[51]; /*!< HASH context swap registers, Address offset: 0x0F8-0x1C0 */
+} HASH_TypeDef;
+
+/**
+ * @brief HASH
+ */
+
+typedef struct
+{
+ __IO uint32_t CR; /*!< RNG control register, Address offset: 0x00 */
+ __IO uint32_t SR; /*!< RNG status register, Address offset: 0x04 */
+ __IO uint32_t DR; /*!< RNG data register, Address offset: 0x08 */
+} RNG_TypeDef;
+
+/**
+ * @}
+ */
+
+/** @addtogroup Peripheral_memory_map
+ * @{
+ */
+
+#define FLASH_BASE ((uint32_t)0x08000000) /*!< FLASH base address in the alias region */
+#define SRAM_BASE ((uint32_t)0x20000000) /*!< SRAM base address in the alias region */
+#define PERIPH_BASE ((uint32_t)0x40000000) /*!< Peripheral base address in the alias region */
+
+#define SRAM_BB_BASE ((uint32_t)0x22000000) /*!< SRAM base address in the bit-band region */
+#define PERIPH_BB_BASE ((uint32_t)0x42000000) /*!< Peripheral base address in the bit-band region */
+
+#define FSMC_R_BASE ((uint32_t)0xA0000000) /*!< FSMC registers base address */
+
+/*!< Peripheral memory map */
+#define APB1PERIPH_BASE PERIPH_BASE
+#define APB2PERIPH_BASE (PERIPH_BASE + 0x00010000)
+#define AHB1PERIPH_BASE (PERIPH_BASE + 0x00020000)
+#define AHB2PERIPH_BASE (PERIPH_BASE + 0x10000000)
+
+/*!< APB1 peripherals */
+#define TIM2_BASE (APB1PERIPH_BASE + 0x0000)
+#define TIM3_BASE (APB1PERIPH_BASE + 0x0400)
+#define TIM4_BASE (APB1PERIPH_BASE + 0x0800)
+#define TIM5_BASE (APB1PERIPH_BASE + 0x0C00)
+#define TIM6_BASE (APB1PERIPH_BASE + 0x1000)
+#define TIM7_BASE (APB1PERIPH_BASE + 0x1400)
+#define TIM12_BASE (APB1PERIPH_BASE + 0x1800)
+#define TIM13_BASE (APB1PERIPH_BASE + 0x1C00)
+#define TIM14_BASE (APB1PERIPH_BASE + 0x2000)
+#define RTC_BASE (APB1PERIPH_BASE + 0x2800)
+#define WWDG_BASE (APB1PERIPH_BASE + 0x2C00)
+#define IWDG_BASE (APB1PERIPH_BASE + 0x3000)
+#define SPI2_BASE (APB1PERIPH_BASE + 0x3800)
+#define SPI3_BASE (APB1PERIPH_BASE + 0x3C00)
+#define USART2_BASE (APB1PERIPH_BASE + 0x4400)
+#define USART3_BASE (APB1PERIPH_BASE + 0x4800)
+#define UART4_BASE (APB1PERIPH_BASE + 0x4C00)
+#define UART5_BASE (APB1PERIPH_BASE + 0x5000)
+#define I2C1_BASE (APB1PERIPH_BASE + 0x5400)
+#define I2C2_BASE (APB1PERIPH_BASE + 0x5800)
+#define I2C3_BASE (APB1PERIPH_BASE + 0x5C00)
+#define CAN1_BASE (APB1PERIPH_BASE + 0x6400)
+#define CAN2_BASE (APB1PERIPH_BASE + 0x6800)
+#define PWR_BASE (APB1PERIPH_BASE + 0x7000)
+#define DAC_BASE (APB1PERIPH_BASE + 0x7400)
+
+/*!< APB2 peripherals */
+#define TIM1_BASE (APB2PERIPH_BASE + 0x0000)
+#define TIM8_BASE (APB2PERIPH_BASE + 0x0400)
+#define USART1_BASE (APB2PERIPH_BASE + 0x1000)
+#define USART6_BASE (APB2PERIPH_BASE + 0x1400)
+#define ADC1_BASE (APB2PERIPH_BASE + 0x2000)
+#define ADC2_BASE (APB2PERIPH_BASE + 0x2100)
+#define ADC3_BASE (APB2PERIPH_BASE + 0x2200)
+#define ADC_BASE (APB2PERIPH_BASE + 0x2300)
+#define SDIO_BASE (APB2PERIPH_BASE + 0x2C00)
+#define SPI1_BASE (APB2PERIPH_BASE + 0x3000)
+#define SYSCFG_BASE (APB2PERIPH_BASE + 0x3800)
+#define EXTI_BASE (APB2PERIPH_BASE + 0x3C00)
+#define TIM9_BASE (APB2PERIPH_BASE + 0x4000)
+#define TIM10_BASE (APB2PERIPH_BASE + 0x4400)
+#define TIM11_BASE (APB2PERIPH_BASE + 0x4800)
+
+/*!< AHB1 peripherals */
+#define GPIOA_BASE (AHB1PERIPH_BASE + 0x0000)
+#define GPIOB_BASE (AHB1PERIPH_BASE + 0x0400)
+#define GPIOC_BASE (AHB1PERIPH_BASE + 0x0800)
+#define GPIOD_BASE (AHB1PERIPH_BASE + 0x0C00)
+#define GPIOE_BASE (AHB1PERIPH_BASE + 0x1000)
+#define GPIOF_BASE (AHB1PERIPH_BASE + 0x1400)
+#define GPIOG_BASE (AHB1PERIPH_BASE + 0x1800)
+#define GPIOH_BASE (AHB1PERIPH_BASE + 0x1C00)
+#define GPIOI_BASE (AHB1PERIPH_BASE + 0x2000)
+#define CRC_BASE (AHB1PERIPH_BASE + 0x3000)
+#define RCC_BASE (AHB1PERIPH_BASE + 0x3800)
+#define FLASH_R_BASE (AHB1PERIPH_BASE + 0x3C00)
+#define BKPSRAM_BASE (AHB1PERIPH_BASE + 0x4000)
+#define DMA1_BASE (AHB1PERIPH_BASE + 0x6000)
+#define DMA1_Stream0_BASE (DMA1_BASE + 0x010)
+#define DMA1_Stream1_BASE (DMA1_BASE + 0x028)
+#define DMA1_Stream2_BASE (DMA1_BASE + 0x040)
+#define DMA1_Stream3_BASE (DMA1_BASE + 0x058)
+#define DMA1_Stream4_BASE (DMA1_BASE + 0x070)
+#define DMA1_Stream5_BASE (DMA1_BASE + 0x088)
+#define DMA1_Stream6_BASE (DMA1_BASE + 0x0A0)
+#define DMA1_Stream7_BASE (DMA1_BASE + 0x0B8)
+#define DMA2_BASE (AHB1PERIPH_BASE + 0x6400)
+#define DMA2_Stream0_BASE (DMA2_BASE + 0x010)
+#define DMA2_Stream1_BASE (DMA2_BASE + 0x028)
+#define DMA2_Stream2_BASE (DMA2_BASE + 0x040)
+#define DMA2_Stream3_BASE (DMA2_BASE + 0x058)
+#define DMA2_Stream4_BASE (DMA2_BASE + 0x070)
+#define DMA2_Stream5_BASE (DMA2_BASE + 0x088)
+#define DMA2_Stream6_BASE (DMA2_BASE + 0x0A0)
+#define DMA2_Stream7_BASE (DMA2_BASE + 0x0B8)
+#define ETH_BASE (AHB1PERIPH_BASE + 0x8000)
+#define ETH_MAC_BASE (ETH_BASE)
+#define ETH_MMC_BASE (ETH_BASE + 0x0100)
+#define ETH_PTP_BASE (ETH_BASE + 0x0700)
+#define ETH_DMA_BASE (ETH_BASE + 0x1000)
+
+/*!< AHB2 peripherals */
+#define DCMI_BASE (AHB2PERIPH_BASE + 0x50000)
+#define CRYP_BASE (AHB2PERIPH_BASE + 0x60000)
+#define HASH_BASE (AHB2PERIPH_BASE + 0x60400)
+#define RNG_BASE (AHB2PERIPH_BASE + 0x60800)
+
+/*!< FSMC Bankx registers base address */
+#define FSMC_Bank1_R_BASE (FSMC_R_BASE + 0x0000)
+#define FSMC_Bank1E_R_BASE (FSMC_R_BASE + 0x0104)
+#define FSMC_Bank2_R_BASE (FSMC_R_BASE + 0x0060)
+#define FSMC_Bank3_R_BASE (FSMC_R_BASE + 0x0080)
+#define FSMC_Bank4_R_BASE (FSMC_R_BASE + 0x00A0)
+
+/* Debug MCU registers base address */
+#define DBGMCU_BASE ((uint32_t )0xE0042000)
+
+/**
+ * @}
+ */
+
+/** @addtogroup Peripheral_declaration
+ * @{
+ */
+#define TIM2 ((TIM_TypeDef *) TIM2_BASE)
+#define TIM3 ((TIM_TypeDef *) TIM3_BASE)
+#define TIM4 ((TIM_TypeDef *) TIM4_BASE)
+#define TIM5 ((TIM_TypeDef *) TIM5_BASE)
+#define TIM6 ((TIM_TypeDef *) TIM6_BASE)
+#define TIM7 ((TIM_TypeDef *) TIM7_BASE)
+#define TIM12 ((TIM_TypeDef *) TIM12_BASE)
+#define TIM13 ((TIM_TypeDef *) TIM13_BASE)
+#define TIM14 ((TIM_TypeDef *) TIM14_BASE)
+#define RTC ((RTC_TypeDef *) RTC_BASE)
+#define WWDG ((WWDG_TypeDef *) WWDG_BASE)
+#define IWDG ((IWDG_TypeDef *) IWDG_BASE)
+#define SPI2 ((SPI_TypeDef *) SPI2_BASE)
+#define SPI3 ((SPI_TypeDef *) SPI3_BASE)
+#define USART2 ((USART_TypeDef *) USART2_BASE)
+#define USART3 ((USART_TypeDef *) USART3_BASE)
+#define UART4 ((USART_TypeDef *) UART4_BASE)
+#define UART5 ((USART_TypeDef *) UART5_BASE)
+#define I2C1 ((I2C_TypeDef *) I2C1_BASE)
+#define I2C2 ((I2C_TypeDef *) I2C2_BASE)
+#define I2C3 ((I2C_TypeDef *) I2C3_BASE)
+#define CAN1 ((CAN_TypeDef *) CAN1_BASE)
+#define CAN2 ((CAN_TypeDef *) CAN2_BASE)
+#define PWR ((PWR_TypeDef *) PWR_BASE)
+#define DAC ((DAC_TypeDef *) DAC_BASE)
+#define TIM1 ((TIM_TypeDef *) TIM1_BASE)
+#define TIM8 ((TIM_TypeDef *) TIM8_BASE)
+#define USART1 ((USART_TypeDef *) USART1_BASE)
+#define USART6 ((USART_TypeDef *) USART6_BASE)
+#define ADC ((ADC_Common_TypeDef *) ADC_BASE)
+#define ADC1 ((ADC_TypeDef *) ADC1_BASE)
+#define ADC2 ((ADC_TypeDef *) ADC2_BASE)
+#define ADC3 ((ADC_TypeDef *) ADC3_BASE)
+#define SDIO ((SDIO_TypeDef *) SDIO_BASE)
+#define SPI1 ((SPI_TypeDef *) SPI1_BASE)
+#define SYSCFG ((SYSCFG_TypeDef *) SYSCFG_BASE)
+#define EXTI ((EXTI_TypeDef *) EXTI_BASE)
+#define TIM9 ((TIM_TypeDef *) TIM9_BASE)
+#define TIM10 ((TIM_TypeDef *) TIM10_BASE)
+#define TIM11 ((TIM_TypeDef *) TIM11_BASE)
+#define GPIOA ((GPIO_TypeDef *) GPIOA_BASE)
+#define GPIOB ((GPIO_TypeDef *) GPIOB_BASE)
+#define GPIOC ((GPIO_TypeDef *) GPIOC_BASE)
+#define GPIOD ((GPIO_TypeDef *) GPIOD_BASE)
+#define GPIOE ((GPIO_TypeDef *) GPIOE_BASE)
+#define GPIOF ((GPIO_TypeDef *) GPIOF_BASE)
+#define GPIOG ((GPIO_TypeDef *) GPIOG_BASE)
+#define GPIOH ((GPIO_TypeDef *) GPIOH_BASE)
+#define GPIOI ((GPIO_TypeDef *) GPIOI_BASE)
+#define CRC ((CRC_TypeDef *) CRC_BASE)
+#define RCC ((RCC_TypeDef *) RCC_BASE)
+#define FLASH ((FLASH_TypeDef *) FLASH_R_BASE)
+#define DMA1 ((DMA_TypeDef *) DMA1_BASE)
+#define DMA1_Stream0 ((DMA_Stream_TypeDef *) DMA1_Stream0_BASE)
+#define DMA1_Stream1 ((DMA_Stream_TypeDef *) DMA1_Stream1_BASE)
+#define DMA1_Stream2 ((DMA_Stream_TypeDef *) DMA1_Stream2_BASE)
+#define DMA1_Stream3 ((DMA_Stream_TypeDef *) DMA1_Stream3_BASE)
+#define DMA1_Stream4 ((DMA_Stream_TypeDef *) DMA1_Stream4_BASE)
+#define DMA1_Stream5 ((DMA_Stream_TypeDef *) DMA1_Stream5_BASE)
+#define DMA1_Stream6 ((DMA_Stream_TypeDef *) DMA1_Stream6_BASE)
+#define DMA1_Stream7 ((DMA_Stream_TypeDef *) DMA1_Stream7_BASE)
+#define DMA2 ((DMA_TypeDef *) DMA2_BASE)
+#define DMA2_Stream0 ((DMA_Stream_TypeDef *) DMA2_Stream0_BASE)
+#define DMA2_Stream1 ((DMA_Stream_TypeDef *) DMA2_Stream1_BASE)
+#define DMA2_Stream2 ((DMA_Stream_TypeDef *) DMA2_Stream2_BASE)
+#define DMA2_Stream3 ((DMA_Stream_TypeDef *) DMA2_Stream3_BASE)
+#define DMA2_Stream4 ((DMA_Stream_TypeDef *) DMA2_Stream4_BASE)
+#define DMA2_Stream5 ((DMA_Stream_TypeDef *) DMA2_Stream5_BASE)
+#define DMA2_Stream6 ((DMA_Stream_TypeDef *) DMA2_Stream6_BASE)
+#define DMA2_Stream7 ((DMA_Stream_TypeDef *) DMA2_Stream7_BASE)
+#define ETH ((ETH_TypeDef *) ETH_BASE)
+#define DCMI ((DCMI_TypeDef *) DCMI_BASE)
+#define CRYP ((CRYP_TypeDef *) CRYP_BASE)
+#define HASH ((HASH_TypeDef *) HASH_BASE)
+#define RNG ((RNG_TypeDef *) RNG_BASE)
+#define FSMC_Bank1 ((FSMC_Bank1_TypeDef *) FSMC_Bank1_R_BASE)
+#define FSMC_Bank1E ((FSMC_Bank1E_TypeDef *) FSMC_Bank1E_R_BASE)
+#define FSMC_Bank2 ((FSMC_Bank2_TypeDef *) FSMC_Bank2_R_BASE)
+#define FSMC_Bank3 ((FSMC_Bank3_TypeDef *) FSMC_Bank3_R_BASE)
+#define FSMC_Bank4 ((FSMC_Bank4_TypeDef *) FSMC_Bank4_R_BASE)
+#define DBGMCU ((DBGMCU_TypeDef *) DBGMCU_BASE)
+
+/**
+ * @}
+ */
+
+/** @addtogroup Exported_constants
+ * @{
+ */
+
+ /** @addtogroup Peripheral_Registers_Bits_Definition
+ * @{
+ */
+
+/******************************************************************************/
+/* Peripheral Registers_Bits_Definition */
+/******************************************************************************/
+
+/******************************************************************************/
+/* */
+/* Analog to Digital Converter */
+/* */
+/******************************************************************************/
+/******************** Bit definition for ADC_SR register ********************/
+#define ADC_SR_AWD ((uint8_t)0x01) /*!<Analog watchdog flag */
+#define ADC_SR_EOC ((uint8_t)0x02) /*!<End of conversion */
+#define ADC_SR_JEOC ((uint8_t)0x04) /*!<Injected channel end of conversion */
+#define ADC_SR_JSTRT ((uint8_t)0x08) /*!<Injected channel Start flag */
+#define ADC_SR_STRT ((uint8_t)0x10) /*!<Regular channel Start flag */
+#define ADC_SR_OVR ((uint8_t)0x20) /*!<Overrun flag */
+
+/******************* Bit definition for ADC_CR1 register ********************/
+#define ADC_CR1_AWDCH ((uint32_t)0x0000001F) /*!<AWDCH[4:0] bits (Analog watchdog channel select bits) */
+#define ADC_CR1_AWDCH_0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define ADC_CR1_AWDCH_1 ((uint32_t)0x00000002) /*!<Bit 1 */
+#define ADC_CR1_AWDCH_2 ((uint32_t)0x00000004) /*!<Bit 2 */
+#define ADC_CR1_AWDCH_3 ((uint32_t)0x00000008) /*!<Bit 3 */
+#define ADC_CR1_AWDCH_4 ((uint32_t)0x00000010) /*!<Bit 4 */
+#define ADC_CR1_EOCIE ((uint32_t)0x00000020) /*!<Interrupt enable for EOC */
+#define ADC_CR1_AWDIE ((uint32_t)0x00000040) /*!<AAnalog Watchdog interrupt enable */
+#define ADC_CR1_JEOCIE ((uint32_t)0x00000080) /*!<Interrupt enable for injected channels */
+#define ADC_CR1_SCAN ((uint32_t)0x00000100) /*!<Scan mode */
+#define ADC_CR1_AWDSGL ((uint32_t)0x00000200) /*!<Enable the watchdog on a single channel in scan mode */
+#define ADC_CR1_JAUTO ((uint32_t)0x00000400) /*!<Automatic injected group conversion */
+#define ADC_CR1_DISCEN ((uint32_t)0x00000800) /*!<Discontinuous mode on regular channels */
+#define ADC_CR1_JDISCEN ((uint32_t)0x00001000) /*!<Discontinuous mode on injected channels */
+#define ADC_CR1_DISCNUM ((uint32_t)0x0000E000) /*!<DISCNUM[2:0] bits (Discontinuous mode channel count) */
+#define ADC_CR1_DISCNUM_0 ((uint32_t)0x00002000) /*!<Bit 0 */
+#define ADC_CR1_DISCNUM_1 ((uint32_t)0x00004000) /*!<Bit 1 */
+#define ADC_CR1_DISCNUM_2 ((uint32_t)0x00008000) /*!<Bit 2 */
+#define ADC_CR1_JAWDEN ((uint32_t)0x00400000) /*!<Analog watchdog enable on injected channels */
+#define ADC_CR1_AWDEN ((uint32_t)0x00800000) /*!<Analog watchdog enable on regular channels */
+#define ADC_CR1_RES ((uint32_t)0x03000000) /*!<RES[2:0] bits (Resolution) */
+#define ADC_CR1_RES_0 ((uint32_t)0x01000000) /*!<Bit 0 */
+#define ADC_CR1_RES_1 ((uint32_t)0x02000000) /*!<Bit 1 */
+#define ADC_CR1_OVRIE ((uint32_t)0x04000000) /*!<overrun interrupt enable */
+
+/******************* Bit definition for ADC_CR2 register ********************/
+#define ADC_CR2_ADON ((uint32_t)0x00000001) /*!<A/D Converter ON / OFF */
+#define ADC_CR2_CONT ((uint32_t)0x00000002) /*!<Continuous Conversion */
+#define ADC_CR2_DMA ((uint32_t)0x00000100) /*!<Direct Memory access mode */
+#define ADC_CR2_DDS ((uint32_t)0x00000200) /*!<DMA disable selection (Single ADC) */
+#define ADC_CR2_EOCS ((uint32_t)0x00000400) /*!<End of conversion selection */
+#define ADC_CR2_ALIGN ((uint32_t)0x00000800) /*!<Data Alignment */
+#define ADC_CR2_JEXTSEL ((uint32_t)0x000F0000) /*!<JEXTSEL[3:0] bits (External event select for injected group) */
+#define ADC_CR2_JEXTSEL_0 ((uint32_t)0x00010000) /*!<Bit 0 */
+#define ADC_CR2_JEXTSEL_1 ((uint32_t)0x00020000) /*!<Bit 1 */
+#define ADC_CR2_JEXTSEL_2 ((uint32_t)0x00040000) /*!<Bit 2 */
+#define ADC_CR2_JEXTSEL_3 ((uint32_t)0x00080000) /*!<Bit 3 */
+#define ADC_CR2_JEXTEN ((uint32_t)0x00300000) /*!<JEXTEN[1:0] bits (External Trigger Conversion mode for injected channelsp) */
+#define ADC_CR2_JEXTEN_0 ((uint32_t)0x00100000) /*!<Bit 0 */
+#define ADC_CR2_JEXTEN_1 ((uint32_t)0x00200000) /*!<Bit 1 */
+#define ADC_CR2_JSWSTART ((uint32_t)0x00400000) /*!<Start Conversion of injected channels */
+#define ADC_CR2_EXTSEL ((uint32_t)0x0F000000) /*!<EXTSEL[3:0] bits (External Event Select for regular group) */
+#define ADC_CR2_EXTSEL_0 ((uint32_t)0x01000000) /*!<Bit 0 */
+#define ADC_CR2_EXTSEL_1 ((uint32_t)0x02000000) /*!<Bit 1 */
+#define ADC_CR2_EXTSEL_2 ((uint32_t)0x04000000) /*!<Bit 2 */
+#define ADC_CR2_EXTSEL_3 ((uint32_t)0x08000000) /*!<Bit 3 */
+#define ADC_CR2_EXTEN ((uint32_t)0x30000000) /*!<EXTEN[1:0] bits (External Trigger Conversion mode for regular channelsp) */
+#define ADC_CR2_EXTEN_0 ((uint32_t)0x10000000) /*!<Bit 0 */
+#define ADC_CR2_EXTEN_1 ((uint32_t)0x20000000) /*!<Bit 1 */
+#define ADC_CR2_SWSTART ((uint32_t)0x40000000) /*!<Start Conversion of regular channels */
+
+/****************** Bit definition for ADC_SMPR1 register *******************/
+#define ADC_SMPR1_SMP10 ((uint32_t)0x00000007) /*!<SMP10[2:0] bits (Channel 10 Sample time selection) */
+#define ADC_SMPR1_SMP10_0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define ADC_SMPR1_SMP10_1 ((uint32_t)0x00000002) /*!<Bit 1 */
+#define ADC_SMPR1_SMP10_2 ((uint32_t)0x00000004) /*!<Bit 2 */
+#define ADC_SMPR1_SMP11 ((uint32_t)0x00000038) /*!<SMP11[2:0] bits (Channel 11 Sample time selection) */
+#define ADC_SMPR1_SMP11_0 ((uint32_t)0x00000008) /*!<Bit 0 */
+#define ADC_SMPR1_SMP11_1 ((uint32_t)0x00000010) /*!<Bit 1 */
+#define ADC_SMPR1_SMP11_2 ((uint32_t)0x00000020) /*!<Bit 2 */
+#define ADC_SMPR1_SMP12 ((uint32_t)0x000001C0) /*!<SMP12[2:0] bits (Channel 12 Sample time selection) */
+#define ADC_SMPR1_SMP12_0 ((uint32_t)0x00000040) /*!<Bit 0 */
+#define ADC_SMPR1_SMP12_1 ((uint32_t)0x00000080) /*!<Bit 1 */
+#define ADC_SMPR1_SMP12_2 ((uint32_t)0x00000100) /*!<Bit 2 */
+#define ADC_SMPR1_SMP13 ((uint32_t)0x00000E00) /*!<SMP13[2:0] bits (Channel 13 Sample time selection) */
+#define ADC_SMPR1_SMP13_0 ((uint32_t)0x00000200) /*!<Bit 0 */
+#define ADC_SMPR1_SMP13_1 ((uint32_t)0x00000400) /*!<Bit 1 */
+#define ADC_SMPR1_SMP13_2 ((uint32_t)0x00000800) /*!<Bit 2 */
+#define ADC_SMPR1_SMP14 ((uint32_t)0x00007000) /*!<SMP14[2:0] bits (Channel 14 Sample time selection) */
+#define ADC_SMPR1_SMP14_0 ((uint32_t)0x00001000) /*!<Bit 0 */
+#define ADC_SMPR1_SMP14_1 ((uint32_t)0x00002000) /*!<Bit 1 */
+#define ADC_SMPR1_SMP14_2 ((uint32_t)0x00004000) /*!<Bit 2 */
+#define ADC_SMPR1_SMP15 ((uint32_t)0x00038000) /*!<SMP15[2:0] bits (Channel 15 Sample time selection) */
+#define ADC_SMPR1_SMP15_0 ((uint32_t)0x00008000) /*!<Bit 0 */
+#define ADC_SMPR1_SMP15_1 ((uint32_t)0x00010000) /*!<Bit 1 */
+#define ADC_SMPR1_SMP15_2 ((uint32_t)0x00020000) /*!<Bit 2 */
+#define ADC_SMPR1_SMP16 ((uint32_t)0x001C0000) /*!<SMP16[2:0] bits (Channel 16 Sample time selection) */
+#define ADC_SMPR1_SMP16_0 ((uint32_t)0x00040000) /*!<Bit 0 */
+#define ADC_SMPR1_SMP16_1 ((uint32_t)0x00080000) /*!<Bit 1 */
+#define ADC_SMPR1_SMP16_2 ((uint32_t)0x00100000) /*!<Bit 2 */
+#define ADC_SMPR1_SMP17 ((uint32_t)0x00E00000) /*!<SMP17[2:0] bits (Channel 17 Sample time selection) */
+#define ADC_SMPR1_SMP17_0 ((uint32_t)0x00200000) /*!<Bit 0 */
+#define ADC_SMPR1_SMP17_1 ((uint32_t)0x00400000) /*!<Bit 1 */
+#define ADC_SMPR1_SMP17_2 ((uint32_t)0x00800000) /*!<Bit 2 */
+#define ADC_SMPR1_SMP18 ((uint32_t)0x07000000) /*!<SMP18[2:0] bits (Channel 18 Sample time selection) */
+#define ADC_SMPR1_SMP18_0 ((uint32_t)0x01000000) /*!<Bit 0 */
+#define ADC_SMPR1_SMP18_1 ((uint32_t)0x02000000) /*!<Bit 1 */
+#define ADC_SMPR1_SMP18_2 ((uint32_t)0x04000000) /*!<Bit 2 */
+
+/****************** Bit definition for ADC_SMPR2 register *******************/
+#define ADC_SMPR2_SMP0 ((uint32_t)0x00000007) /*!<SMP0[2:0] bits (Channel 0 Sample time selection) */
+#define ADC_SMPR2_SMP0_0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define ADC_SMPR2_SMP0_1 ((uint32_t)0x00000002) /*!<Bit 1 */
+#define ADC_SMPR2_SMP0_2 ((uint32_t)0x00000004) /*!<Bit 2 */
+#define ADC_SMPR2_SMP1 ((uint32_t)0x00000038) /*!<SMP1[2:0] bits (Channel 1 Sample time selection) */
+#define ADC_SMPR2_SMP1_0 ((uint32_t)0x00000008) /*!<Bit 0 */
+#define ADC_SMPR2_SMP1_1 ((uint32_t)0x00000010) /*!<Bit 1 */
+#define ADC_SMPR2_SMP1_2 ((uint32_t)0x00000020) /*!<Bit 2 */
+#define ADC_SMPR2_SMP2 ((uint32_t)0x000001C0) /*!<SMP2[2:0] bits (Channel 2 Sample time selection) */
+#define ADC_SMPR2_SMP2_0 ((uint32_t)0x00000040) /*!<Bit 0 */
+#define ADC_SMPR2_SMP2_1 ((uint32_t)0x00000080) /*!<Bit 1 */
+#define ADC_SMPR2_SMP2_2 ((uint32_t)0x00000100) /*!<Bit 2 */
+#define ADC_SMPR2_SMP3 ((uint32_t)0x00000E00) /*!<SMP3[2:0] bits (Channel 3 Sample time selection) */
+#define ADC_SMPR2_SMP3_0 ((uint32_t)0x00000200) /*!<Bit 0 */
+#define ADC_SMPR2_SMP3_1 ((uint32_t)0x00000400) /*!<Bit 1 */
+#define ADC_SMPR2_SMP3_2 ((uint32_t)0x00000800) /*!<Bit 2 */
+#define ADC_SMPR2_SMP4 ((uint32_t)0x00007000) /*!<SMP4[2:0] bits (Channel 4 Sample time selection) */
+#define ADC_SMPR2_SMP4_0 ((uint32_t)0x00001000) /*!<Bit 0 */
+#define ADC_SMPR2_SMP4_1 ((uint32_t)0x00002000) /*!<Bit 1 */
+#define ADC_SMPR2_SMP4_2 ((uint32_t)0x00004000) /*!<Bit 2 */
+#define ADC_SMPR2_SMP5 ((uint32_t)0x00038000) /*!<SMP5[2:0] bits (Channel 5 Sample time selection) */
+#define ADC_SMPR2_SMP5_0 ((uint32_t)0x00008000) /*!<Bit 0 */
+#define ADC_SMPR2_SMP5_1 ((uint32_t)0x00010000) /*!<Bit 1 */
+#define ADC_SMPR2_SMP5_2 ((uint32_t)0x00020000) /*!<Bit 2 */
+#define ADC_SMPR2_SMP6 ((uint32_t)0x001C0000) /*!<SMP6[2:0] bits (Channel 6 Sample time selection) */
+#define ADC_SMPR2_SMP6_0 ((uint32_t)0x00040000) /*!<Bit 0 */
+#define ADC_SMPR2_SMP6_1 ((uint32_t)0x00080000) /*!<Bit 1 */
+#define ADC_SMPR2_SMP6_2 ((uint32_t)0x00100000) /*!<Bit 2 */
+#define ADC_SMPR2_SMP7 ((uint32_t)0x00E00000) /*!<SMP7[2:0] bits (Channel 7 Sample time selection) */
+#define ADC_SMPR2_SMP7_0 ((uint32_t)0x00200000) /*!<Bit 0 */
+#define ADC_SMPR2_SMP7_1 ((uint32_t)0x00400000) /*!<Bit 1 */
+#define ADC_SMPR2_SMP7_2 ((uint32_t)0x00800000) /*!<Bit 2 */
+#define ADC_SMPR2_SMP8 ((uint32_t)0x07000000) /*!<SMP8[2:0] bits (Channel 8 Sample time selection) */
+#define ADC_SMPR2_SMP8_0 ((uint32_t)0x01000000) /*!<Bit 0 */
+#define ADC_SMPR2_SMP8_1 ((uint32_t)0x02000000) /*!<Bit 1 */
+#define ADC_SMPR2_SMP8_2 ((uint32_t)0x04000000) /*!<Bit 2 */
+#define ADC_SMPR2_SMP9 ((uint32_t)0x38000000) /*!<SMP9[2:0] bits (Channel 9 Sample time selection) */
+#define ADC_SMPR2_SMP9_0 ((uint32_t)0x08000000) /*!<Bit 0 */
+#define ADC_SMPR2_SMP9_1 ((uint32_t)0x10000000) /*!<Bit 1 */
+#define ADC_SMPR2_SMP9_2 ((uint32_t)0x20000000) /*!<Bit 2 */
+
+/****************** Bit definition for ADC_JOFR1 register *******************/
+#define ADC_JOFR1_JOFFSET1 ((uint16_t)0x0FFF) /*!<Data offset for injected channel 1 */
+
+/****************** Bit definition for ADC_JOFR2 register *******************/
+#define ADC_JOFR2_JOFFSET2 ((uint16_t)0x0FFF) /*!<Data offset for injected channel 2 */
+
+/****************** Bit definition for ADC_JOFR3 register *******************/
+#define ADC_JOFR3_JOFFSET3 ((uint16_t)0x0FFF) /*!<Data offset for injected channel 3 */
+
+/****************** Bit definition for ADC_JOFR4 register *******************/
+#define ADC_JOFR4_JOFFSET4 ((uint16_t)0x0FFF) /*!<Data offset for injected channel 4 */
+
+/******************* Bit definition for ADC_HTR register ********************/
+#define ADC_HTR_HT ((uint16_t)0x0FFF) /*!<Analog watchdog high threshold */
+
+/******************* Bit definition for ADC_LTR register ********************/
+#define ADC_LTR_LT ((uint16_t)0x0FFF) /*!<Analog watchdog low threshold */
+
+/******************* Bit definition for ADC_SQR1 register *******************/
+#define ADC_SQR1_SQ13 ((uint32_t)0x0000001F) /*!<SQ13[4:0] bits (13th conversion in regular sequence) */
+#define ADC_SQR1_SQ13_0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define ADC_SQR1_SQ13_1 ((uint32_t)0x00000002) /*!<Bit 1 */
+#define ADC_SQR1_SQ13_2 ((uint32_t)0x00000004) /*!<Bit 2 */
+#define ADC_SQR1_SQ13_3 ((uint32_t)0x00000008) /*!<Bit 3 */
+#define ADC_SQR1_SQ13_4 ((uint32_t)0x00000010) /*!<Bit 4 */
+#define ADC_SQR1_SQ14 ((uint32_t)0x000003E0) /*!<SQ14[4:0] bits (14th conversion in regular sequence) */
+#define ADC_SQR1_SQ14_0 ((uint32_t)0x00000020) /*!<Bit 0 */
+#define ADC_SQR1_SQ14_1 ((uint32_t)0x00000040) /*!<Bit 1 */
+#define ADC_SQR1_SQ14_2 ((uint32_t)0x00000080) /*!<Bit 2 */
+#define ADC_SQR1_SQ14_3 ((uint32_t)0x00000100) /*!<Bit 3 */
+#define ADC_SQR1_SQ14_4 ((uint32_t)0x00000200) /*!<Bit 4 */
+#define ADC_SQR1_SQ15 ((uint32_t)0x00007C00) /*!<SQ15[4:0] bits (15th conversion in regular sequence) */
+#define ADC_SQR1_SQ15_0 ((uint32_t)0x00000400) /*!<Bit 0 */
+#define ADC_SQR1_SQ15_1 ((uint32_t)0x00000800) /*!<Bit 1 */
+#define ADC_SQR1_SQ15_2 ((uint32_t)0x00001000) /*!<Bit 2 */
+#define ADC_SQR1_SQ15_3 ((uint32_t)0x00002000) /*!<Bit 3 */
+#define ADC_SQR1_SQ15_4 ((uint32_t)0x00004000) /*!<Bit 4 */
+#define ADC_SQR1_SQ16 ((uint32_t)0x000F8000) /*!<SQ16[4:0] bits (16th conversion in regular sequence) */
+#define ADC_SQR1_SQ16_0 ((uint32_t)0x00008000) /*!<Bit 0 */
+#define ADC_SQR1_SQ16_1 ((uint32_t)0x00010000) /*!<Bit 1 */
+#define ADC_SQR1_SQ16_2 ((uint32_t)0x00020000) /*!<Bit 2 */
+#define ADC_SQR1_SQ16_3 ((uint32_t)0x00040000) /*!<Bit 3 */
+#define ADC_SQR1_SQ16_4 ((uint32_t)0x00080000) /*!<Bit 4 */
+#define ADC_SQR1_L ((uint32_t)0x00F00000) /*!<L[3:0] bits (Regular channel sequence length) */
+#define ADC_SQR1_L_0 ((uint32_t)0x00100000) /*!<Bit 0 */
+#define ADC_SQR1_L_1 ((uint32_t)0x00200000) /*!<Bit 1 */
+#define ADC_SQR1_L_2 ((uint32_t)0x00400000) /*!<Bit 2 */
+#define ADC_SQR1_L_3 ((uint32_t)0x00800000) /*!<Bit 3 */
+
+/******************* Bit definition for ADC_SQR2 register *******************/
+#define ADC_SQR2_SQ7 ((uint32_t)0x0000001F) /*!<SQ7[4:0] bits (7th conversion in regular sequence) */
+#define ADC_SQR2_SQ7_0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define ADC_SQR2_SQ7_1 ((uint32_t)0x00000002) /*!<Bit 1 */
+#define ADC_SQR2_SQ7_2 ((uint32_t)0x00000004) /*!<Bit 2 */
+#define ADC_SQR2_SQ7_3 ((uint32_t)0x00000008) /*!<Bit 3 */
+#define ADC_SQR2_SQ7_4 ((uint32_t)0x00000010) /*!<Bit 4 */
+#define ADC_SQR2_SQ8 ((uint32_t)0x000003E0) /*!<SQ8[4:0] bits (8th conversion in regular sequence) */
+#define ADC_SQR2_SQ8_0 ((uint32_t)0x00000020) /*!<Bit 0 */
+#define ADC_SQR2_SQ8_1 ((uint32_t)0x00000040) /*!<Bit 1 */
+#define ADC_SQR2_SQ8_2 ((uint32_t)0x00000080) /*!<Bit 2 */
+#define ADC_SQR2_SQ8_3 ((uint32_t)0x00000100) /*!<Bit 3 */
+#define ADC_SQR2_SQ8_4 ((uint32_t)0x00000200) /*!<Bit 4 */
+#define ADC_SQR2_SQ9 ((uint32_t)0x00007C00) /*!<SQ9[4:0] bits (9th conversion in regular sequence) */
+#define ADC_SQR2_SQ9_0 ((uint32_t)0x00000400) /*!<Bit 0 */
+#define ADC_SQR2_SQ9_1 ((uint32_t)0x00000800) /*!<Bit 1 */
+#define ADC_SQR2_SQ9_2 ((uint32_t)0x00001000) /*!<Bit 2 */
+#define ADC_SQR2_SQ9_3 ((uint32_t)0x00002000) /*!<Bit 3 */
+#define ADC_SQR2_SQ9_4 ((uint32_t)0x00004000) /*!<Bit 4 */
+#define ADC_SQR2_SQ10 ((uint32_t)0x000F8000) /*!<SQ10[4:0] bits (10th conversion in regular sequence) */
+#define ADC_SQR2_SQ10_0 ((uint32_t)0x00008000) /*!<Bit 0 */
+#define ADC_SQR2_SQ10_1 ((uint32_t)0x00010000) /*!<Bit 1 */
+#define ADC_SQR2_SQ10_2 ((uint32_t)0x00020000) /*!<Bit 2 */
+#define ADC_SQR2_SQ10_3 ((uint32_t)0x00040000) /*!<Bit 3 */
+#define ADC_SQR2_SQ10_4 ((uint32_t)0x00080000) /*!<Bit 4 */
+#define ADC_SQR2_SQ11 ((uint32_t)0x01F00000) /*!<SQ11[4:0] bits (11th conversion in regular sequence) */
+#define ADC_SQR2_SQ11_0 ((uint32_t)0x00100000) /*!<Bit 0 */
+#define ADC_SQR2_SQ11_1 ((uint32_t)0x00200000) /*!<Bit 1 */
+#define ADC_SQR2_SQ11_2 ((uint32_t)0x00400000) /*!<Bit 2 */
+#define ADC_SQR2_SQ11_3 ((uint32_t)0x00800000) /*!<Bit 3 */
+#define ADC_SQR2_SQ11_4 ((uint32_t)0x01000000) /*!<Bit 4 */
+#define ADC_SQR2_SQ12 ((uint32_t)0x3E000000) /*!<SQ12[4:0] bits (12th conversion in regular sequence) */
+#define ADC_SQR2_SQ12_0 ((uint32_t)0x02000000) /*!<Bit 0 */
+#define ADC_SQR2_SQ12_1 ((uint32_t)0x04000000) /*!<Bit 1 */
+#define ADC_SQR2_SQ12_2 ((uint32_t)0x08000000) /*!<Bit 2 */
+#define ADC_SQR2_SQ12_3 ((uint32_t)0x10000000) /*!<Bit 3 */
+#define ADC_SQR2_SQ12_4 ((uint32_t)0x20000000) /*!<Bit 4 */
+
+/******************* Bit definition for ADC_SQR3 register *******************/
+#define ADC_SQR3_SQ1 ((uint32_t)0x0000001F) /*!<SQ1[4:0] bits (1st conversion in regular sequence) */
+#define ADC_SQR3_SQ1_0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define ADC_SQR3_SQ1_1 ((uint32_t)0x00000002) /*!<Bit 1 */
+#define ADC_SQR3_SQ1_2 ((uint32_t)0x00000004) /*!<Bit 2 */
+#define ADC_SQR3_SQ1_3 ((uint32_t)0x00000008) /*!<Bit 3 */
+#define ADC_SQR3_SQ1_4 ((uint32_t)0x00000010) /*!<Bit 4 */
+#define ADC_SQR3_SQ2 ((uint32_t)0x000003E0) /*!<SQ2[4:0] bits (2nd conversion in regular sequence) */
+#define ADC_SQR3_SQ2_0 ((uint32_t)0x00000020) /*!<Bit 0 */
+#define ADC_SQR3_SQ2_1 ((uint32_t)0x00000040) /*!<Bit 1 */
+#define ADC_SQR3_SQ2_2 ((uint32_t)0x00000080) /*!<Bit 2 */
+#define ADC_SQR3_SQ2_3 ((uint32_t)0x00000100) /*!<Bit 3 */
+#define ADC_SQR3_SQ2_4 ((uint32_t)0x00000200) /*!<Bit 4 */
+#define ADC_SQR3_SQ3 ((uint32_t)0x00007C00) /*!<SQ3[4:0] bits (3rd conversion in regular sequence) */
+#define ADC_SQR3_SQ3_0 ((uint32_t)0x00000400) /*!<Bit 0 */
+#define ADC_SQR3_SQ3_1 ((uint32_t)0x00000800) /*!<Bit 1 */
+#define ADC_SQR3_SQ3_2 ((uint32_t)0x00001000) /*!<Bit 2 */
+#define ADC_SQR3_SQ3_3 ((uint32_t)0x00002000) /*!<Bit 3 */
+#define ADC_SQR3_SQ3_4 ((uint32_t)0x00004000) /*!<Bit 4 */
+#define ADC_SQR3_SQ4 ((uint32_t)0x000F8000) /*!<SQ4[4:0] bits (4th conversion in regular sequence) */
+#define ADC_SQR3_SQ4_0 ((uint32_t)0x00008000) /*!<Bit 0 */
+#define ADC_SQR3_SQ4_1 ((uint32_t)0x00010000) /*!<Bit 1 */
+#define ADC_SQR3_SQ4_2 ((uint32_t)0x00020000) /*!<Bit 2 */
+#define ADC_SQR3_SQ4_3 ((uint32_t)0x00040000) /*!<Bit 3 */
+#define ADC_SQR3_SQ4_4 ((uint32_t)0x00080000) /*!<Bit 4 */
+#define ADC_SQR3_SQ5 ((uint32_t)0x01F00000) /*!<SQ5[4:0] bits (5th conversion in regular sequence) */
+#define ADC_SQR3_SQ5_0 ((uint32_t)0x00100000) /*!<Bit 0 */
+#define ADC_SQR3_SQ5_1 ((uint32_t)0x00200000) /*!<Bit 1 */
+#define ADC_SQR3_SQ5_2 ((uint32_t)0x00400000) /*!<Bit 2 */
+#define ADC_SQR3_SQ5_3 ((uint32_t)0x00800000) /*!<Bit 3 */
+#define ADC_SQR3_SQ5_4 ((uint32_t)0x01000000) /*!<Bit 4 */
+#define ADC_SQR3_SQ6 ((uint32_t)0x3E000000) /*!<SQ6[4:0] bits (6th conversion in regular sequence) */
+#define ADC_SQR3_SQ6_0 ((uint32_t)0x02000000) /*!<Bit 0 */
+#define ADC_SQR3_SQ6_1 ((uint32_t)0x04000000) /*!<Bit 1 */
+#define ADC_SQR3_SQ6_2 ((uint32_t)0x08000000) /*!<Bit 2 */
+#define ADC_SQR3_SQ6_3 ((uint32_t)0x10000000) /*!<Bit 3 */
+#define ADC_SQR3_SQ6_4 ((uint32_t)0x20000000) /*!<Bit 4 */
+
+/******************* Bit definition for ADC_JSQR register *******************/
+#define ADC_JSQR_JSQ1 ((uint32_t)0x0000001F) /*!<JSQ1[4:0] bits (1st conversion in injected sequence) */
+#define ADC_JSQR_JSQ1_0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define ADC_JSQR_JSQ1_1 ((uint32_t)0x00000002) /*!<Bit 1 */
+#define ADC_JSQR_JSQ1_2 ((uint32_t)0x00000004) /*!<Bit 2 */
+#define ADC_JSQR_JSQ1_3 ((uint32_t)0x00000008) /*!<Bit 3 */
+#define ADC_JSQR_JSQ1_4 ((uint32_t)0x00000010) /*!<Bit 4 */
+#define ADC_JSQR_JSQ2 ((uint32_t)0x000003E0) /*!<JSQ2[4:0] bits (2nd conversion in injected sequence) */
+#define ADC_JSQR_JSQ2_0 ((uint32_t)0x00000020) /*!<Bit 0 */
+#define ADC_JSQR_JSQ2_1 ((uint32_t)0x00000040) /*!<Bit 1 */
+#define ADC_JSQR_JSQ2_2 ((uint32_t)0x00000080) /*!<Bit 2 */
+#define ADC_JSQR_JSQ2_3 ((uint32_t)0x00000100) /*!<Bit 3 */
+#define ADC_JSQR_JSQ2_4 ((uint32_t)0x00000200) /*!<Bit 4 */
+#define ADC_JSQR_JSQ3 ((uint32_t)0x00007C00) /*!<JSQ3[4:0] bits (3rd conversion in injected sequence) */
+#define ADC_JSQR_JSQ3_0 ((uint32_t)0x00000400) /*!<Bit 0 */
+#define ADC_JSQR_JSQ3_1 ((uint32_t)0x00000800) /*!<Bit 1 */
+#define ADC_JSQR_JSQ3_2 ((uint32_t)0x00001000) /*!<Bit 2 */
+#define ADC_JSQR_JSQ3_3 ((uint32_t)0x00002000) /*!<Bit 3 */
+#define ADC_JSQR_JSQ3_4 ((uint32_t)0x00004000) /*!<Bit 4 */
+#define ADC_JSQR_JSQ4 ((uint32_t)0x000F8000) /*!<JSQ4[4:0] bits (4th conversion in injected sequence) */
+#define ADC_JSQR_JSQ4_0 ((uint32_t)0x00008000) /*!<Bit 0 */
+#define ADC_JSQR_JSQ4_1 ((uint32_t)0x00010000) /*!<Bit 1 */
+#define ADC_JSQR_JSQ4_2 ((uint32_t)0x00020000) /*!<Bit 2 */
+#define ADC_JSQR_JSQ4_3 ((uint32_t)0x00040000) /*!<Bit 3 */
+#define ADC_JSQR_JSQ4_4 ((uint32_t)0x00080000) /*!<Bit 4 */
+#define ADC_JSQR_JL ((uint32_t)0x00300000) /*!<JL[1:0] bits (Injected Sequence length) */
+#define ADC_JSQR_JL_0 ((uint32_t)0x00100000) /*!<Bit 0 */
+#define ADC_JSQR_JL_1 ((uint32_t)0x00200000) /*!<Bit 1 */
+
+/******************* Bit definition for ADC_JDR1 register *******************/
+#define ADC_JDR1_JDATA ((uint16_t)0xFFFF) /*!<Injected data */
+
+/******************* Bit definition for ADC_JDR2 register *******************/
+#define ADC_JDR2_JDATA ((uint16_t)0xFFFF) /*!<Injected data */
+
+/******************* Bit definition for ADC_JDR3 register *******************/
+#define ADC_JDR3_JDATA ((uint16_t)0xFFFF) /*!<Injected data */
+
+/******************* Bit definition for ADC_JDR4 register *******************/
+#define ADC_JDR4_JDATA ((uint16_t)0xFFFF) /*!<Injected data */
+
+/******************** Bit definition for ADC_DR register ********************/
+#define ADC_DR_DATA ((uint32_t)0x0000FFFF) /*!<Regular data */
+#define ADC_DR_ADC2DATA ((uint32_t)0xFFFF0000) /*!<ADC2 data */
+
+/******************* Bit definition for ADC_CSR register ********************/
+#define ADC_CSR_AWD1 ((uint32_t)0x00000001) /*!<ADC1 Analog watchdog flag */
+#define ADC_CSR_EOC1 ((uint32_t)0x00000002) /*!<ADC1 End of conversion */
+#define ADC_CSR_JEOC1 ((uint32_t)0x00000004) /*!<ADC1 Injected channel end of conversion */
+#define ADC_CSR_JSTRT1 ((uint32_t)0x00000008) /*!<ADC1 Injected channel Start flag */
+#define ADC_CSR_STRT1 ((uint32_t)0x00000010) /*!<ADC1 Regular channel Start flag */
+#define ADC_CSR_DOVR1 ((uint32_t)0x00000020) /*!<ADC1 DMA overrun flag */
+#define ADC_CSR_AWD2 ((uint32_t)0x00000100) /*!<ADC2 Analog watchdog flag */
+#define ADC_CSR_EOC2 ((uint32_t)0x00000200) /*!<ADC2 End of conversion */
+#define ADC_CSR_JEOC2 ((uint32_t)0x00000400) /*!<ADC2 Injected channel end of conversion */
+#define ADC_CSR_JSTRT2 ((uint32_t)0x00000800) /*!<ADC2 Injected channel Start flag */
+#define ADC_CSR_STRT2 ((uint32_t)0x00001000) /*!<ADC2 Regular channel Start flag */
+#define ADC_CSR_DOVR2 ((uint32_t)0x00002000) /*!<ADC2 DMA overrun flag */
+#define ADC_CSR_AWD3 ((uint32_t)0x00010000) /*!<ADC3 Analog watchdog flag */
+#define ADC_CSR_EOC3 ((uint32_t)0x00020000) /*!<ADC3 End of conversion */
+#define ADC_CSR_JEOC3 ((uint32_t)0x00040000) /*!<ADC3 Injected channel end of conversion */
+#define ADC_CSR_JSTRT3 ((uint32_t)0x00080000) /*!<ADC3 Injected channel Start flag */
+#define ADC_CSR_STRT3 ((uint32_t)0x00100000) /*!<ADC3 Regular channel Start flag */
+#define ADC_CSR_DOVR3 ((uint32_t)0x00200000) /*!<ADC3 DMA overrun flag */
+
+/******************* Bit definition for ADC_CCR register ********************/
+#define ADC_CCR_MULTI ((uint32_t)0x0000001F) /*!<MULTI[4:0] bits (Multi-ADC mode selection) */
+#define ADC_CCR_MULTI_0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define ADC_CCR_MULTI_1 ((uint32_t)0x00000002) /*!<Bit 1 */
+#define ADC_CCR_MULTI_2 ((uint32_t)0x00000004) /*!<Bit 2 */
+#define ADC_CCR_MULTI_3 ((uint32_t)0x00000008) /*!<Bit 3 */
+#define ADC_CCR_MULTI_4 ((uint32_t)0x00000010) /*!<Bit 4 */
+#define ADC_CCR_DELAY ((uint32_t)0x00000F00) /*!<DELAY[3:0] bits (Delay between 2 sampling phases) */
+#define ADC_CCR_DELAY_0 ((uint32_t)0x00000100) /*!<Bit 0 */
+#define ADC_CCR_DELAY_1 ((uint32_t)0x00000200) /*!<Bit 1 */
+#define ADC_CCR_DELAY_2 ((uint32_t)0x00000400) /*!<Bit 2 */
+#define ADC_CCR_DELAY_3 ((uint32_t)0x00000800) /*!<Bit 3 */
+#define ADC_CCR_DDS ((uint32_t)0x00002000) /*!<DMA disable selection (Multi-ADC mode) */
+#define ADC_CCR_DMA ((uint32_t)0x0000C000) /*!<DMA[1:0] bits (Direct Memory Access mode for multimode) */
+#define ADC_CCR_DMA_0 ((uint32_t)0x00004000) /*!<Bit 0 */
+#define ADC_CCR_DMA_1 ((uint32_t)0x00008000) /*!<Bit 1 */
+#define ADC_CCR_ADCPRE ((uint32_t)0x00030000) /*!<ADCPRE[1:0] bits (ADC prescaler) */
+#define ADC_CCR_ADCPRE_0 ((uint32_t)0x00010000) /*!<Bit 0 */
+#define ADC_CCR_ADCPRE_1 ((uint32_t)0x00020000) /*!<Bit 1 */
+#define ADC_CCR_VBATE ((uint32_t)0x00400000) /*!<VBAT Enable */
+#define ADC_CCR_TSVREFE ((uint32_t)0x00800000) /*!<Temperature Sensor and VREFINT Enable */
+
+/******************* Bit definition for ADC_CDR register ********************/
+#define ADC_CDR_DATA1 ((uint32_t)0x0000FFFF) /*!<1st data of a pair of regular conversions */
+#define ADC_CDR_DATA2 ((uint32_t)0xFFFF0000) /*!<2nd data of a pair of regular conversions */
+
+/******************************************************************************/
+/* */
+/* Controller Area Network */
+/* */
+/******************************************************************************/
+/*!<CAN control and status registers */
+/******************* Bit definition for CAN_MCR register ********************/
+#define CAN_MCR_INRQ ((uint16_t)0x0001) /*!<Initialization Request */
+#define CAN_MCR_SLEEP ((uint16_t)0x0002) /*!<Sleep Mode Request */
+#define CAN_MCR_TXFP ((uint16_t)0x0004) /*!<Transmit FIFO Priority */
+#define CAN_MCR_RFLM ((uint16_t)0x0008) /*!<Receive FIFO Locked Mode */
+#define CAN_MCR_NART ((uint16_t)0x0010) /*!<No Automatic Retransmission */
+#define CAN_MCR_AWUM ((uint16_t)0x0020) /*!<Automatic Wakeup Mode */
+#define CAN_MCR_ABOM ((uint16_t)0x0040) /*!<Automatic Bus-Off Management */
+#define CAN_MCR_TTCM ((uint16_t)0x0080) /*!<Time Triggered Communication Mode */
+#define CAN_MCR_RESET ((uint16_t)0x8000) /*!<bxCAN software master reset */
+
+/******************* Bit definition for CAN_MSR register ********************/
+#define CAN_MSR_INAK ((uint16_t)0x0001) /*!<Initialization Acknowledge */
+#define CAN_MSR_SLAK ((uint16_t)0x0002) /*!<Sleep Acknowledge */
+#define CAN_MSR_ERRI ((uint16_t)0x0004) /*!<Error Interrupt */
+#define CAN_MSR_WKUI ((uint16_t)0x0008) /*!<Wakeup Interrupt */
+#define CAN_MSR_SLAKI ((uint16_t)0x0010) /*!<Sleep Acknowledge Interrupt */
+#define CAN_MSR_TXM ((uint16_t)0x0100) /*!<Transmit Mode */
+#define CAN_MSR_RXM ((uint16_t)0x0200) /*!<Receive Mode */
+#define CAN_MSR_SAMP ((uint16_t)0x0400) /*!<Last Sample Point */
+#define CAN_MSR_RX ((uint16_t)0x0800) /*!<CAN Rx Signal */
+
+/******************* Bit definition for CAN_TSR register ********************/
+#define CAN_TSR_RQCP0 ((uint32_t)0x00000001) /*!<Request Completed Mailbox0 */
+#define CAN_TSR_TXOK0 ((uint32_t)0x00000002) /*!<Transmission OK of Mailbox0 */
+#define CAN_TSR_ALST0 ((uint32_t)0x00000004) /*!<Arbitration Lost for Mailbox0 */
+#define CAN_TSR_TERR0 ((uint32_t)0x00000008) /*!<Transmission Error of Mailbox0 */
+#define CAN_TSR_ABRQ0 ((uint32_t)0x00000080) /*!<Abort Request for Mailbox0 */
+#define CAN_TSR_RQCP1 ((uint32_t)0x00000100) /*!<Request Completed Mailbox1 */
+#define CAN_TSR_TXOK1 ((uint32_t)0x00000200) /*!<Transmission OK of Mailbox1 */
+#define CAN_TSR_ALST1 ((uint32_t)0x00000400) /*!<Arbitration Lost for Mailbox1 */
+#define CAN_TSR_TERR1 ((uint32_t)0x00000800) /*!<Transmission Error of Mailbox1 */
+#define CAN_TSR_ABRQ1 ((uint32_t)0x00008000) /*!<Abort Request for Mailbox 1 */
+#define CAN_TSR_RQCP2 ((uint32_t)0x00010000) /*!<Request Completed Mailbox2 */
+#define CAN_TSR_TXOK2 ((uint32_t)0x00020000) /*!<Transmission OK of Mailbox 2 */
+#define CAN_TSR_ALST2 ((uint32_t)0x00040000) /*!<Arbitration Lost for mailbox 2 */
+#define CAN_TSR_TERR2 ((uint32_t)0x00080000) /*!<Transmission Error of Mailbox 2 */
+#define CAN_TSR_ABRQ2 ((uint32_t)0x00800000) /*!<Abort Request for Mailbox 2 */
+#define CAN_TSR_CODE ((uint32_t)0x03000000) /*!<Mailbox Code */
+
+#define CAN_TSR_TME ((uint32_t)0x1C000000) /*!<TME[2:0] bits */
+#define CAN_TSR_TME0 ((uint32_t)0x04000000) /*!<Transmit Mailbox 0 Empty */
+#define CAN_TSR_TME1 ((uint32_t)0x08000000) /*!<Transmit Mailbox 1 Empty */
+#define CAN_TSR_TME2 ((uint32_t)0x10000000) /*!<Transmit Mailbox 2 Empty */
+
+#define CAN_TSR_LOW ((uint32_t)0xE0000000) /*!<LOW[2:0] bits */
+#define CAN_TSR_LOW0 ((uint32_t)0x20000000) /*!<Lowest Priority Flag for Mailbox 0 */
+#define CAN_TSR_LOW1 ((uint32_t)0x40000000) /*!<Lowest Priority Flag for Mailbox 1 */
+#define CAN_TSR_LOW2 ((uint32_t)0x80000000) /*!<Lowest Priority Flag for Mailbox 2 */
+
+/******************* Bit definition for CAN_RF0R register *******************/
+#define CAN_RF0R_FMP0 ((uint8_t)0x03) /*!<FIFO 0 Message Pending */
+#define CAN_RF0R_FULL0 ((uint8_t)0x08) /*!<FIFO 0 Full */
+#define CAN_RF0R_FOVR0 ((uint8_t)0x10) /*!<FIFO 0 Overrun */
+#define CAN_RF0R_RFOM0 ((uint8_t)0x20) /*!<Release FIFO 0 Output Mailbox */
+
+/******************* Bit definition for CAN_RF1R register *******************/
+#define CAN_RF1R_FMP1 ((uint8_t)0x03) /*!<FIFO 1 Message Pending */
+#define CAN_RF1R_FULL1 ((uint8_t)0x08) /*!<FIFO 1 Full */
+#define CAN_RF1R_FOVR1 ((uint8_t)0x10) /*!<FIFO 1 Overrun */
+#define CAN_RF1R_RFOM1 ((uint8_t)0x20) /*!<Release FIFO 1 Output Mailbox */
+
+/******************** Bit definition for CAN_IER register *******************/
+#define CAN_IER_TMEIE ((uint32_t)0x00000001) /*!<Transmit Mailbox Empty Interrupt Enable */
+#define CAN_IER_FMPIE0 ((uint32_t)0x00000002) /*!<FIFO Message Pending Interrupt Enable */
+#define CAN_IER_FFIE0 ((uint32_t)0x00000004) /*!<FIFO Full Interrupt Enable */
+#define CAN_IER_FOVIE0 ((uint32_t)0x00000008) /*!<FIFO Overrun Interrupt Enable */
+#define CAN_IER_FMPIE1 ((uint32_t)0x00000010) /*!<FIFO Message Pending Interrupt Enable */
+#define CAN_IER_FFIE1 ((uint32_t)0x00000020) /*!<FIFO Full Interrupt Enable */
+#define CAN_IER_FOVIE1 ((uint32_t)0x00000040) /*!<FIFO Overrun Interrupt Enable */
+#define CAN_IER_EWGIE ((uint32_t)0x00000100) /*!<Error Warning Interrupt Enable */
+#define CAN_IER_EPVIE ((uint32_t)0x00000200) /*!<Error Passive Interrupt Enable */
+#define CAN_IER_BOFIE ((uint32_t)0x00000400) /*!<Bus-Off Interrupt Enable */
+#define CAN_IER_LECIE ((uint32_t)0x00000800) /*!<Last Error Code Interrupt Enable */
+#define CAN_IER_ERRIE ((uint32_t)0x00008000) /*!<Error Interrupt Enable */
+#define CAN_IER_WKUIE ((uint32_t)0x00010000) /*!<Wakeup Interrupt Enable */
+#define CAN_IER_SLKIE ((uint32_t)0x00020000) /*!<Sleep Interrupt Enable */
+
+/******************** Bit definition for CAN_ESR register *******************/
+#define CAN_ESR_EWGF ((uint32_t)0x00000001) /*!<Error Warning Flag */
+#define CAN_ESR_EPVF ((uint32_t)0x00000002) /*!<Error Passive Flag */
+#define CAN_ESR_BOFF ((uint32_t)0x00000004) /*!<Bus-Off Flag */
+
+#define CAN_ESR_LEC ((uint32_t)0x00000070) /*!<LEC[2:0] bits (Last Error Code) */
+#define CAN_ESR_LEC_0 ((uint32_t)0x00000010) /*!<Bit 0 */
+#define CAN_ESR_LEC_1 ((uint32_t)0x00000020) /*!<Bit 1 */
+#define CAN_ESR_LEC_2 ((uint32_t)0x00000040) /*!<Bit 2 */
+
+#define CAN_ESR_TEC ((uint32_t)0x00FF0000) /*!<Least significant byte of the 9-bit Transmit Error Counter */
+#define CAN_ESR_REC ((uint32_t)0xFF000000) /*!<Receive Error Counter */
+
+/******************* Bit definition for CAN_BTR register ********************/
+#define CAN_BTR_BRP ((uint32_t)0x000003FF) /*!<Baud Rate Prescaler */
+#define CAN_BTR_TS1 ((uint32_t)0x000F0000) /*!<Time Segment 1 */
+#define CAN_BTR_TS2 ((uint32_t)0x00700000) /*!<Time Segment 2 */
+#define CAN_BTR_SJW ((uint32_t)0x03000000) /*!<Resynchronization Jump Width */
+#define CAN_BTR_LBKM ((uint32_t)0x40000000) /*!<Loop Back Mode (Debug) */
+#define CAN_BTR_SILM ((uint32_t)0x80000000) /*!<Silent Mode */
+
+/*!<Mailbox registers */
+/****************** Bit definition for CAN_TI0R register ********************/
+#define CAN_TI0R_TXRQ ((uint32_t)0x00000001) /*!<Transmit Mailbox Request */
+#define CAN_TI0R_RTR ((uint32_t)0x00000002) /*!<Remote Transmission Request */
+#define CAN_TI0R_IDE ((uint32_t)0x00000004) /*!<Identifier Extension */
+#define CAN_TI0R_EXID ((uint32_t)0x001FFFF8) /*!<Extended Identifier */
+#define CAN_TI0R_STID ((uint32_t)0xFFE00000) /*!<Standard Identifier or Extended Identifier */
+
+/****************** Bit definition for CAN_TDT0R register *******************/
+#define CAN_TDT0R_DLC ((uint32_t)0x0000000F) /*!<Data Length Code */
+#define CAN_TDT0R_TGT ((uint32_t)0x00000100) /*!<Transmit Global Time */
+#define CAN_TDT0R_TIME ((uint32_t)0xFFFF0000) /*!<Message Time Stamp */
+
+/****************** Bit definition for CAN_TDL0R register *******************/
+#define CAN_TDL0R_DATA0 ((uint32_t)0x000000FF) /*!<Data byte 0 */
+#define CAN_TDL0R_DATA1 ((uint32_t)0x0000FF00) /*!<Data byte 1 */
+#define CAN_TDL0R_DATA2 ((uint32_t)0x00FF0000) /*!<Data byte 2 */
+#define CAN_TDL0R_DATA3 ((uint32_t)0xFF000000) /*!<Data byte 3 */
+
+/****************** Bit definition for CAN_TDH0R register *******************/
+#define CAN_TDH0R_DATA4 ((uint32_t)0x000000FF) /*!<Data byte 4 */
+#define CAN_TDH0R_DATA5 ((uint32_t)0x0000FF00) /*!<Data byte 5 */
+#define CAN_TDH0R_DATA6 ((uint32_t)0x00FF0000) /*!<Data byte 6 */
+#define CAN_TDH0R_DATA7 ((uint32_t)0xFF000000) /*!<Data byte 7 */
+
+/******************* Bit definition for CAN_TI1R register *******************/
+#define CAN_TI1R_TXRQ ((uint32_t)0x00000001) /*!<Transmit Mailbox Request */
+#define CAN_TI1R_RTR ((uint32_t)0x00000002) /*!<Remote Transmission Request */
+#define CAN_TI1R_IDE ((uint32_t)0x00000004) /*!<Identifier Extension */
+#define CAN_TI1R_EXID ((uint32_t)0x001FFFF8) /*!<Extended Identifier */
+#define CAN_TI1R_STID ((uint32_t)0xFFE00000) /*!<Standard Identifier or Extended Identifier */
+
+/******************* Bit definition for CAN_TDT1R register ******************/
+#define CAN_TDT1R_DLC ((uint32_t)0x0000000F) /*!<Data Length Code */
+#define CAN_TDT1R_TGT ((uint32_t)0x00000100) /*!<Transmit Global Time */
+#define CAN_TDT1R_TIME ((uint32_t)0xFFFF0000) /*!<Message Time Stamp */
+
+/******************* Bit definition for CAN_TDL1R register ******************/
+#define CAN_TDL1R_DATA0 ((uint32_t)0x000000FF) /*!<Data byte 0 */
+#define CAN_TDL1R_DATA1 ((uint32_t)0x0000FF00) /*!<Data byte 1 */
+#define CAN_TDL1R_DATA2 ((uint32_t)0x00FF0000) /*!<Data byte 2 */
+#define CAN_TDL1R_DATA3 ((uint32_t)0xFF000000) /*!<Data byte 3 */
+
+/******************* Bit definition for CAN_TDH1R register ******************/
+#define CAN_TDH1R_DATA4 ((uint32_t)0x000000FF) /*!<Data byte 4 */
+#define CAN_TDH1R_DATA5 ((uint32_t)0x0000FF00) /*!<Data byte 5 */
+#define CAN_TDH1R_DATA6 ((uint32_t)0x00FF0000) /*!<Data byte 6 */
+#define CAN_TDH1R_DATA7 ((uint32_t)0xFF000000) /*!<Data byte 7 */
+
+/******************* Bit definition for CAN_TI2R register *******************/
+#define CAN_TI2R_TXRQ ((uint32_t)0x00000001) /*!<Transmit Mailbox Request */
+#define CAN_TI2R_RTR ((uint32_t)0x00000002) /*!<Remote Transmission Request */
+#define CAN_TI2R_IDE ((uint32_t)0x00000004) /*!<Identifier Extension */
+#define CAN_TI2R_EXID ((uint32_t)0x001FFFF8) /*!<Extended identifier */
+#define CAN_TI2R_STID ((uint32_t)0xFFE00000) /*!<Standard Identifier or Extended Identifier */
+
+/******************* Bit definition for CAN_TDT2R register ******************/
+#define CAN_TDT2R_DLC ((uint32_t)0x0000000F) /*!<Data Length Code */
+#define CAN_TDT2R_TGT ((uint32_t)0x00000100) /*!<Transmit Global Time */
+#define CAN_TDT2R_TIME ((uint32_t)0xFFFF0000) /*!<Message Time Stamp */
+
+/******************* Bit definition for CAN_TDL2R register ******************/
+#define CAN_TDL2R_DATA0 ((uint32_t)0x000000FF) /*!<Data byte 0 */
+#define CAN_TDL2R_DATA1 ((uint32_t)0x0000FF00) /*!<Data byte 1 */
+#define CAN_TDL2R_DATA2 ((uint32_t)0x00FF0000) /*!<Data byte 2 */
+#define CAN_TDL2R_DATA3 ((uint32_t)0xFF000000) /*!<Data byte 3 */
+
+/******************* Bit definition for CAN_TDH2R register ******************/
+#define CAN_TDH2R_DATA4 ((uint32_t)0x000000FF) /*!<Data byte 4 */
+#define CAN_TDH2R_DATA5 ((uint32_t)0x0000FF00) /*!<Data byte 5 */
+#define CAN_TDH2R_DATA6 ((uint32_t)0x00FF0000) /*!<Data byte 6 */
+#define CAN_TDH2R_DATA7 ((uint32_t)0xFF000000) /*!<Data byte 7 */
+
+/******************* Bit definition for CAN_RI0R register *******************/
+#define CAN_RI0R_RTR ((uint32_t)0x00000002) /*!<Remote Transmission Request */
+#define CAN_RI0R_IDE ((uint32_t)0x00000004) /*!<Identifier Extension */
+#define CAN_RI0R_EXID ((uint32_t)0x001FFFF8) /*!<Extended Identifier */
+#define CAN_RI0R_STID ((uint32_t)0xFFE00000) /*!<Standard Identifier or Extended Identifier */
+
+/******************* Bit definition for CAN_RDT0R register ******************/
+#define CAN_RDT0R_DLC ((uint32_t)0x0000000F) /*!<Data Length Code */
+#define CAN_RDT0R_FMI ((uint32_t)0x0000FF00) /*!<Filter Match Index */
+#define CAN_RDT0R_TIME ((uint32_t)0xFFFF0000) /*!<Message Time Stamp */
+
+/******************* Bit definition for CAN_RDL0R register ******************/
+#define CAN_RDL0R_DATA0 ((uint32_t)0x000000FF) /*!<Data byte 0 */
+#define CAN_RDL0R_DATA1 ((uint32_t)0x0000FF00) /*!<Data byte 1 */
+#define CAN_RDL0R_DATA2 ((uint32_t)0x00FF0000) /*!<Data byte 2 */
+#define CAN_RDL0R_DATA3 ((uint32_t)0xFF000000) /*!<Data byte 3 */
+
+/******************* Bit definition for CAN_RDH0R register ******************/
+#define CAN_RDH0R_DATA4 ((uint32_t)0x000000FF) /*!<Data byte 4 */
+#define CAN_RDH0R_DATA5 ((uint32_t)0x0000FF00) /*!<Data byte 5 */
+#define CAN_RDH0R_DATA6 ((uint32_t)0x00FF0000) /*!<Data byte 6 */
+#define CAN_RDH0R_DATA7 ((uint32_t)0xFF000000) /*!<Data byte 7 */
+
+/******************* Bit definition for CAN_RI1R register *******************/
+#define CAN_RI1R_RTR ((uint32_t)0x00000002) /*!<Remote Transmission Request */
+#define CAN_RI1R_IDE ((uint32_t)0x00000004) /*!<Identifier Extension */
+#define CAN_RI1R_EXID ((uint32_t)0x001FFFF8) /*!<Extended identifier */
+#define CAN_RI1R_STID ((uint32_t)0xFFE00000) /*!<Standard Identifier or Extended Identifier */
+
+/******************* Bit definition for CAN_RDT1R register ******************/
+#define CAN_RDT1R_DLC ((uint32_t)0x0000000F) /*!<Data Length Code */
+#define CAN_RDT1R_FMI ((uint32_t)0x0000FF00) /*!<Filter Match Index */
+#define CAN_RDT1R_TIME ((uint32_t)0xFFFF0000) /*!<Message Time Stamp */
+
+/******************* Bit definition for CAN_RDL1R register ******************/
+#define CAN_RDL1R_DATA0 ((uint32_t)0x000000FF) /*!<Data byte 0 */
+#define CAN_RDL1R_DATA1 ((uint32_t)0x0000FF00) /*!<Data byte 1 */
+#define CAN_RDL1R_DATA2 ((uint32_t)0x00FF0000) /*!<Data byte 2 */
+#define CAN_RDL1R_DATA3 ((uint32_t)0xFF000000) /*!<Data byte 3 */
+
+/******************* Bit definition for CAN_RDH1R register ******************/
+#define CAN_RDH1R_DATA4 ((uint32_t)0x000000FF) /*!<Data byte 4 */
+#define CAN_RDH1R_DATA5 ((uint32_t)0x0000FF00) /*!<Data byte 5 */
+#define CAN_RDH1R_DATA6 ((uint32_t)0x00FF0000) /*!<Data byte 6 */
+#define CAN_RDH1R_DATA7 ((uint32_t)0xFF000000) /*!<Data byte 7 */
+
+/*!<CAN filter registers */
+/******************* Bit definition for CAN_FMR register ********************/
+#define CAN_FMR_FINIT ((uint8_t)0x01) /*!<Filter Init Mode */
+
+/******************* Bit definition for CAN_FM1R register *******************/
+#define CAN_FM1R_FBM ((uint16_t)0x3FFF) /*!<Filter Mode */
+#define CAN_FM1R_FBM0 ((uint16_t)0x0001) /*!<Filter Init Mode bit 0 */
+#define CAN_FM1R_FBM1 ((uint16_t)0x0002) /*!<Filter Init Mode bit 1 */
+#define CAN_FM1R_FBM2 ((uint16_t)0x0004) /*!<Filter Init Mode bit 2 */
+#define CAN_FM1R_FBM3 ((uint16_t)0x0008) /*!<Filter Init Mode bit 3 */
+#define CAN_FM1R_FBM4 ((uint16_t)0x0010) /*!<Filter Init Mode bit 4 */
+#define CAN_FM1R_FBM5 ((uint16_t)0x0020) /*!<Filter Init Mode bit 5 */
+#define CAN_FM1R_FBM6 ((uint16_t)0x0040) /*!<Filter Init Mode bit 6 */
+#define CAN_FM1R_FBM7 ((uint16_t)0x0080) /*!<Filter Init Mode bit 7 */
+#define CAN_FM1R_FBM8 ((uint16_t)0x0100) /*!<Filter Init Mode bit 8 */
+#define CAN_FM1R_FBM9 ((uint16_t)0x0200) /*!<Filter Init Mode bit 9 */
+#define CAN_FM1R_FBM10 ((uint16_t)0x0400) /*!<Filter Init Mode bit 10 */
+#define CAN_FM1R_FBM11 ((uint16_t)0x0800) /*!<Filter Init Mode bit 11 */
+#define CAN_FM1R_FBM12 ((uint16_t)0x1000) /*!<Filter Init Mode bit 12 */
+#define CAN_FM1R_FBM13 ((uint16_t)0x2000) /*!<Filter Init Mode bit 13 */
+
+/******************* Bit definition for CAN_FS1R register *******************/
+#define CAN_FS1R_FSC ((uint16_t)0x3FFF) /*!<Filter Scale Configuration */
+#define CAN_FS1R_FSC0 ((uint16_t)0x0001) /*!<Filter Scale Configuration bit 0 */
+#define CAN_FS1R_FSC1 ((uint16_t)0x0002) /*!<Filter Scale Configuration bit 1 */
+#define CAN_FS1R_FSC2 ((uint16_t)0x0004) /*!<Filter Scale Configuration bit 2 */
+#define CAN_FS1R_FSC3 ((uint16_t)0x0008) /*!<Filter Scale Configuration bit 3 */
+#define CAN_FS1R_FSC4 ((uint16_t)0x0010) /*!<Filter Scale Configuration bit 4 */
+#define CAN_FS1R_FSC5 ((uint16_t)0x0020) /*!<Filter Scale Configuration bit 5 */
+#define CAN_FS1R_FSC6 ((uint16_t)0x0040) /*!<Filter Scale Configuration bit 6 */
+#define CAN_FS1R_FSC7 ((uint16_t)0x0080) /*!<Filter Scale Configuration bit 7 */
+#define CAN_FS1R_FSC8 ((uint16_t)0x0100) /*!<Filter Scale Configuration bit 8 */
+#define CAN_FS1R_FSC9 ((uint16_t)0x0200) /*!<Filter Scale Configuration bit 9 */
+#define CAN_FS1R_FSC10 ((uint16_t)0x0400) /*!<Filter Scale Configuration bit 10 */
+#define CAN_FS1R_FSC11 ((uint16_t)0x0800) /*!<Filter Scale Configuration bit 11 */
+#define CAN_FS1R_FSC12 ((uint16_t)0x1000) /*!<Filter Scale Configuration bit 12 */
+#define CAN_FS1R_FSC13 ((uint16_t)0x2000) /*!<Filter Scale Configuration bit 13 */
+
+/****************** Bit definition for CAN_FFA1R register *******************/
+#define CAN_FFA1R_FFA ((uint16_t)0x3FFF) /*!<Filter FIFO Assignment */
+#define CAN_FFA1R_FFA0 ((uint16_t)0x0001) /*!<Filter FIFO Assignment for Filter 0 */
+#define CAN_FFA1R_FFA1 ((uint16_t)0x0002) /*!<Filter FIFO Assignment for Filter 1 */
+#define CAN_FFA1R_FFA2 ((uint16_t)0x0004) /*!<Filter FIFO Assignment for Filter 2 */
+#define CAN_FFA1R_FFA3 ((uint16_t)0x0008) /*!<Filter FIFO Assignment for Filter 3 */
+#define CAN_FFA1R_FFA4 ((uint16_t)0x0010) /*!<Filter FIFO Assignment for Filter 4 */
+#define CAN_FFA1R_FFA5 ((uint16_t)0x0020) /*!<Filter FIFO Assignment for Filter 5 */
+#define CAN_FFA1R_FFA6 ((uint16_t)0x0040) /*!<Filter FIFO Assignment for Filter 6 */
+#define CAN_FFA1R_FFA7 ((uint16_t)0x0080) /*!<Filter FIFO Assignment for Filter 7 */
+#define CAN_FFA1R_FFA8 ((uint16_t)0x0100) /*!<Filter FIFO Assignment for Filter 8 */
+#define CAN_FFA1R_FFA9 ((uint16_t)0x0200) /*!<Filter FIFO Assignment for Filter 9 */
+#define CAN_FFA1R_FFA10 ((uint16_t)0x0400) /*!<Filter FIFO Assignment for Filter 10 */
+#define CAN_FFA1R_FFA11 ((uint16_t)0x0800) /*!<Filter FIFO Assignment for Filter 11 */
+#define CAN_FFA1R_FFA12 ((uint16_t)0x1000) /*!<Filter FIFO Assignment for Filter 12 */
+#define CAN_FFA1R_FFA13 ((uint16_t)0x2000) /*!<Filter FIFO Assignment for Filter 13 */
+
+/******************* Bit definition for CAN_FA1R register *******************/
+#define CAN_FA1R_FACT ((uint16_t)0x3FFF) /*!<Filter Active */
+#define CAN_FA1R_FACT0 ((uint16_t)0x0001) /*!<Filter 0 Active */
+#define CAN_FA1R_FACT1 ((uint16_t)0x0002) /*!<Filter 1 Active */
+#define CAN_FA1R_FACT2 ((uint16_t)0x0004) /*!<Filter 2 Active */
+#define CAN_FA1R_FACT3 ((uint16_t)0x0008) /*!<Filter 3 Active */
+#define CAN_FA1R_FACT4 ((uint16_t)0x0010) /*!<Filter 4 Active */
+#define CAN_FA1R_FACT5 ((uint16_t)0x0020) /*!<Filter 5 Active */
+#define CAN_FA1R_FACT6 ((uint16_t)0x0040) /*!<Filter 6 Active */
+#define CAN_FA1R_FACT7 ((uint16_t)0x0080) /*!<Filter 7 Active */
+#define CAN_FA1R_FACT8 ((uint16_t)0x0100) /*!<Filter 8 Active */
+#define CAN_FA1R_FACT9 ((uint16_t)0x0200) /*!<Filter 9 Active */
+#define CAN_FA1R_FACT10 ((uint16_t)0x0400) /*!<Filter 10 Active */
+#define CAN_FA1R_FACT11 ((uint16_t)0x0800) /*!<Filter 11 Active */
+#define CAN_FA1R_FACT12 ((uint16_t)0x1000) /*!<Filter 12 Active */
+#define CAN_FA1R_FACT13 ((uint16_t)0x2000) /*!<Filter 13 Active */
+
+/******************* Bit definition for CAN_F0R1 register *******************/
+#define CAN_F0R1_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F0R1_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F0R1_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F0R1_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F0R1_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F0R1_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F0R1_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F0R1_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F0R1_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F0R1_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F0R1_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F0R1_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F0R1_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F0R1_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F0R1_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F0R1_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F0R1_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F0R1_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F0R1_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F0R1_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F0R1_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F0R1_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F0R1_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F0R1_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F0R1_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F0R1_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F0R1_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F0R1_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F0R1_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F0R1_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F0R1_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F0R1_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F1R1 register *******************/
+#define CAN_F1R1_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F1R1_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F1R1_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F1R1_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F1R1_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F1R1_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F1R1_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F1R1_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F1R1_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F1R1_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F1R1_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F1R1_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F1R1_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F1R1_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F1R1_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F1R1_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F1R1_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F1R1_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F1R1_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F1R1_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F1R1_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F1R1_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F1R1_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F1R1_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F1R1_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F1R1_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F1R1_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F1R1_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F1R1_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F1R1_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F1R1_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F1R1_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F2R1 register *******************/
+#define CAN_F2R1_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F2R1_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F2R1_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F2R1_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F2R1_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F2R1_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F2R1_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F2R1_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F2R1_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F2R1_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F2R1_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F2R1_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F2R1_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F2R1_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F2R1_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F2R1_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F2R1_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F2R1_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F2R1_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F2R1_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F2R1_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F2R1_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F2R1_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F2R1_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F2R1_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F2R1_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F2R1_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F2R1_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F2R1_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F2R1_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F2R1_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F2R1_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F3R1 register *******************/
+#define CAN_F3R1_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F3R1_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F3R1_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F3R1_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F3R1_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F3R1_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F3R1_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F3R1_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F3R1_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F3R1_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F3R1_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F3R1_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F3R1_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F3R1_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F3R1_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F3R1_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F3R1_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F3R1_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F3R1_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F3R1_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F3R1_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F3R1_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F3R1_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F3R1_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F3R1_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F3R1_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F3R1_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F3R1_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F3R1_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F3R1_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F3R1_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F3R1_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F4R1 register *******************/
+#define CAN_F4R1_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F4R1_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F4R1_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F4R1_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F4R1_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F4R1_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F4R1_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F4R1_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F4R1_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F4R1_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F4R1_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F4R1_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F4R1_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F4R1_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F4R1_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F4R1_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F4R1_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F4R1_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F4R1_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F4R1_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F4R1_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F4R1_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F4R1_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F4R1_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F4R1_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F4R1_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F4R1_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F4R1_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F4R1_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F4R1_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F4R1_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F4R1_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F5R1 register *******************/
+#define CAN_F5R1_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F5R1_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F5R1_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F5R1_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F5R1_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F5R1_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F5R1_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F5R1_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F5R1_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F5R1_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F5R1_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F5R1_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F5R1_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F5R1_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F5R1_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F5R1_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F5R1_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F5R1_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F5R1_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F5R1_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F5R1_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F5R1_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F5R1_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F5R1_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F5R1_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F5R1_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F5R1_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F5R1_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F5R1_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F5R1_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F5R1_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F5R1_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F6R1 register *******************/
+#define CAN_F6R1_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F6R1_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F6R1_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F6R1_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F6R1_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F6R1_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F6R1_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F6R1_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F6R1_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F6R1_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F6R1_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F6R1_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F6R1_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F6R1_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F6R1_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F6R1_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F6R1_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F6R1_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F6R1_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F6R1_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F6R1_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F6R1_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F6R1_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F6R1_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F6R1_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F6R1_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F6R1_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F6R1_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F6R1_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F6R1_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F6R1_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F6R1_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F7R1 register *******************/
+#define CAN_F7R1_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F7R1_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F7R1_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F7R1_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F7R1_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F7R1_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F7R1_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F7R1_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F7R1_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F7R1_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F7R1_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F7R1_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F7R1_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F7R1_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F7R1_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F7R1_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F7R1_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F7R1_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F7R1_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F7R1_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F7R1_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F7R1_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F7R1_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F7R1_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F7R1_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F7R1_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F7R1_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F7R1_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F7R1_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F7R1_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F7R1_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F7R1_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F8R1 register *******************/
+#define CAN_F8R1_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F8R1_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F8R1_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F8R1_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F8R1_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F8R1_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F8R1_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F8R1_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F8R1_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F8R1_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F8R1_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F8R1_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F8R1_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F8R1_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F8R1_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F8R1_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F8R1_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F8R1_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F8R1_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F8R1_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F8R1_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F8R1_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F8R1_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F8R1_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F8R1_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F8R1_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F8R1_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F8R1_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F8R1_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F8R1_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F8R1_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F8R1_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F9R1 register *******************/
+#define CAN_F9R1_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F9R1_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F9R1_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F9R1_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F9R1_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F9R1_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F9R1_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F9R1_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F9R1_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F9R1_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F9R1_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F9R1_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F9R1_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F9R1_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F9R1_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F9R1_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F9R1_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F9R1_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F9R1_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F9R1_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F9R1_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F9R1_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F9R1_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F9R1_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F9R1_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F9R1_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F9R1_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F9R1_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F9R1_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F9R1_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F9R1_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F9R1_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F10R1 register ******************/
+#define CAN_F10R1_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F10R1_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F10R1_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F10R1_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F10R1_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F10R1_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F10R1_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F10R1_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F10R1_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F10R1_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F10R1_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F10R1_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F10R1_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F10R1_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F10R1_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F10R1_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F10R1_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F10R1_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F10R1_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F10R1_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F10R1_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F10R1_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F10R1_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F10R1_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F10R1_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F10R1_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F10R1_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F10R1_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F10R1_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F10R1_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F10R1_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F10R1_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F11R1 register ******************/
+#define CAN_F11R1_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F11R1_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F11R1_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F11R1_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F11R1_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F11R1_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F11R1_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F11R1_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F11R1_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F11R1_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F11R1_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F11R1_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F11R1_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F11R1_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F11R1_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F11R1_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F11R1_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F11R1_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F11R1_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F11R1_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F11R1_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F11R1_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F11R1_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F11R1_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F11R1_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F11R1_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F11R1_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F11R1_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F11R1_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F11R1_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F11R1_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F11R1_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F12R1 register ******************/
+#define CAN_F12R1_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F12R1_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F12R1_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F12R1_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F12R1_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F12R1_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F12R1_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F12R1_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F12R1_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F12R1_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F12R1_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F12R1_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F12R1_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F12R1_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F12R1_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F12R1_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F12R1_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F12R1_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F12R1_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F12R1_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F12R1_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F12R1_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F12R1_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F12R1_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F12R1_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F12R1_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F12R1_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F12R1_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F12R1_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F12R1_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F12R1_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F12R1_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F13R1 register ******************/
+#define CAN_F13R1_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F13R1_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F13R1_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F13R1_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F13R1_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F13R1_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F13R1_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F13R1_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F13R1_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F13R1_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F13R1_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F13R1_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F13R1_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F13R1_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F13R1_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F13R1_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F13R1_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F13R1_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F13R1_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F13R1_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F13R1_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F13R1_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F13R1_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F13R1_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F13R1_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F13R1_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F13R1_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F13R1_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F13R1_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F13R1_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F13R1_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F13R1_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F0R2 register *******************/
+#define CAN_F0R2_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F0R2_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F0R2_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F0R2_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F0R2_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F0R2_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F0R2_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F0R2_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F0R2_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F0R2_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F0R2_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F0R2_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F0R2_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F0R2_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F0R2_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F0R2_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F0R2_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F0R2_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F0R2_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F0R2_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F0R2_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F0R2_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F0R2_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F0R2_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F0R2_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F0R2_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F0R2_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F0R2_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F0R2_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F0R2_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F0R2_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F0R2_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F1R2 register *******************/
+#define CAN_F1R2_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F1R2_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F1R2_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F1R2_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F1R2_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F1R2_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F1R2_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F1R2_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F1R2_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F1R2_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F1R2_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F1R2_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F1R2_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F1R2_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F1R2_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F1R2_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F1R2_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F1R2_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F1R2_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F1R2_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F1R2_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F1R2_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F1R2_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F1R2_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F1R2_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F1R2_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F1R2_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F1R2_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F1R2_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F1R2_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F1R2_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F1R2_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F2R2 register *******************/
+#define CAN_F2R2_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F2R2_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F2R2_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F2R2_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F2R2_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F2R2_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F2R2_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F2R2_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F2R2_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F2R2_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F2R2_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F2R2_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F2R2_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F2R2_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F2R2_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F2R2_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F2R2_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F2R2_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F2R2_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F2R2_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F2R2_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F2R2_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F2R2_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F2R2_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F2R2_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F2R2_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F2R2_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F2R2_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F2R2_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F2R2_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F2R2_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F2R2_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F3R2 register *******************/
+#define CAN_F3R2_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F3R2_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F3R2_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F3R2_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F3R2_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F3R2_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F3R2_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F3R2_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F3R2_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F3R2_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F3R2_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F3R2_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F3R2_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F3R2_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F3R2_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F3R2_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F3R2_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F3R2_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F3R2_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F3R2_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F3R2_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F3R2_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F3R2_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F3R2_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F3R2_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F3R2_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F3R2_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F3R2_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F3R2_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F3R2_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F3R2_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F3R2_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F4R2 register *******************/
+#define CAN_F4R2_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F4R2_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F4R2_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F4R2_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F4R2_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F4R2_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F4R2_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F4R2_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F4R2_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F4R2_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F4R2_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F4R2_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F4R2_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F4R2_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F4R2_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F4R2_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F4R2_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F4R2_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F4R2_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F4R2_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F4R2_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F4R2_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F4R2_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F4R2_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F4R2_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F4R2_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F4R2_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F4R2_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F4R2_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F4R2_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F4R2_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F4R2_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F5R2 register *******************/
+#define CAN_F5R2_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F5R2_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F5R2_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F5R2_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F5R2_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F5R2_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F5R2_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F5R2_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F5R2_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F5R2_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F5R2_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F5R2_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F5R2_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F5R2_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F5R2_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F5R2_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F5R2_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F5R2_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F5R2_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F5R2_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F5R2_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F5R2_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F5R2_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F5R2_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F5R2_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F5R2_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F5R2_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F5R2_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F5R2_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F5R2_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F5R2_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F5R2_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F6R2 register *******************/
+#define CAN_F6R2_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F6R2_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F6R2_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F6R2_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F6R2_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F6R2_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F6R2_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F6R2_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F6R2_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F6R2_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F6R2_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F6R2_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F6R2_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F6R2_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F6R2_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F6R2_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F6R2_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F6R2_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F6R2_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F6R2_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F6R2_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F6R2_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F6R2_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F6R2_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F6R2_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F6R2_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F6R2_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F6R2_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F6R2_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F6R2_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F6R2_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F6R2_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F7R2 register *******************/
+#define CAN_F7R2_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F7R2_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F7R2_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F7R2_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F7R2_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F7R2_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F7R2_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F7R2_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F7R2_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F7R2_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F7R2_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F7R2_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F7R2_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F7R2_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F7R2_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F7R2_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F7R2_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F7R2_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F7R2_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F7R2_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F7R2_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F7R2_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F7R2_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F7R2_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F7R2_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F7R2_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F7R2_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F7R2_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F7R2_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F7R2_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F7R2_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F7R2_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F8R2 register *******************/
+#define CAN_F8R2_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F8R2_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F8R2_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F8R2_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F8R2_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F8R2_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F8R2_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F8R2_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F8R2_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F8R2_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F8R2_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F8R2_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F8R2_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F8R2_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F8R2_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F8R2_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F8R2_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F8R2_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F8R2_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F8R2_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F8R2_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F8R2_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F8R2_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F8R2_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F8R2_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F8R2_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F8R2_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F8R2_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F8R2_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F8R2_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F8R2_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F8R2_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F9R2 register *******************/
+#define CAN_F9R2_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F9R2_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F9R2_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F9R2_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F9R2_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F9R2_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F9R2_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F9R2_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F9R2_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F9R2_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F9R2_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F9R2_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F9R2_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F9R2_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F9R2_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F9R2_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F9R2_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F9R2_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F9R2_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F9R2_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F9R2_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F9R2_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F9R2_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F9R2_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F9R2_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F9R2_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F9R2_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F9R2_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F9R2_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F9R2_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F9R2_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F9R2_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F10R2 register ******************/
+#define CAN_F10R2_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F10R2_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F10R2_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F10R2_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F10R2_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F10R2_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F10R2_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F10R2_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F10R2_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F10R2_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F10R2_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F10R2_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F10R2_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F10R2_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F10R2_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F10R2_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F10R2_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F10R2_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F10R2_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F10R2_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F10R2_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F10R2_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F10R2_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F10R2_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F10R2_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F10R2_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F10R2_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F10R2_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F10R2_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F10R2_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F10R2_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F10R2_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F11R2 register ******************/
+#define CAN_F11R2_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F11R2_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F11R2_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F11R2_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F11R2_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F11R2_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F11R2_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F11R2_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F11R2_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F11R2_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F11R2_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F11R2_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F11R2_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F11R2_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F11R2_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F11R2_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F11R2_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F11R2_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F11R2_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F11R2_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F11R2_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F11R2_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F11R2_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F11R2_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F11R2_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F11R2_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F11R2_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F11R2_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F11R2_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F11R2_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F11R2_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F11R2_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F12R2 register ******************/
+#define CAN_F12R2_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F12R2_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F12R2_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F12R2_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F12R2_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F12R2_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F12R2_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F12R2_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F12R2_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F12R2_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F12R2_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F12R2_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F12R2_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F12R2_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F12R2_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F12R2_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F12R2_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F12R2_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F12R2_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F12R2_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F12R2_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F12R2_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F12R2_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F12R2_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F12R2_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F12R2_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F12R2_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F12R2_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F12R2_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F12R2_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F12R2_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F12R2_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F13R2 register ******************/
+#define CAN_F13R2_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F13R2_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F13R2_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F13R2_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F13R2_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F13R2_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F13R2_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F13R2_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F13R2_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F13R2_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F13R2_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F13R2_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F13R2_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F13R2_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F13R2_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F13R2_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F13R2_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F13R2_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F13R2_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F13R2_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F13R2_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F13R2_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F13R2_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F13R2_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F13R2_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F13R2_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F13R2_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F13R2_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F13R2_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F13R2_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F13R2_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F13R2_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************************************************************************/
+/* */
+/* CRC calculation unit */
+/* */
+/******************************************************************************/
+/******************* Bit definition for CRC_DR register *********************/
+#define CRC_DR_DR ((uint32_t)0xFFFFFFFF) /*!< Data register bits */
+
+
+/******************* Bit definition for CRC_IDR register ********************/
+#define CRC_IDR_IDR ((uint8_t)0xFF) /*!< General-purpose 8-bit data register bits */
+
+
+/******************** Bit definition for CRC_CR register ********************/
+#define CRC_CR_RESET ((uint8_t)0x01) /*!< RESET bit */
+
+/******************************************************************************/
+/* */
+/* Crypto Processor */
+/* */
+/******************************************************************************/
+/******************* Bits definition for CRYP_CR register ********************/
+#define CRYP_CR_ALGODIR ((uint32_t)0x00000004)
+
+#define CRYP_CR_ALGOMODE ((uint32_t)0x00000038)
+#define CRYP_CR_ALGOMODE_0 ((uint32_t)0x00000008)
+#define CRYP_CR_ALGOMODE_1 ((uint32_t)0x00000010)
+#define CRYP_CR_ALGOMODE_2 ((uint32_t)0x00000020)
+#define CRYP_CR_ALGOMODE_TDES_ECB ((uint32_t)0x00000000)
+#define CRYP_CR_ALGOMODE_TDES_CBC ((uint32_t)0x00000008)
+#define CRYP_CR_ALGOMODE_DES_ECB ((uint32_t)0x00000010)
+#define CRYP_CR_ALGOMODE_DES_CBC ((uint32_t)0x00000018)
+#define CRYP_CR_ALGOMODE_AES_ECB ((uint32_t)0x00000020)
+#define CRYP_CR_ALGOMODE_AES_CBC ((uint32_t)0x00000028)
+#define CRYP_CR_ALGOMODE_AES_CTR ((uint32_t)0x00000030)
+#define CRYP_CR_ALGOMODE_AES_KEY ((uint32_t)0x00000038)
+
+#define CRYP_CR_DATATYPE ((uint32_t)0x000000C0)
+#define CRYP_CR_DATATYPE_0 ((uint32_t)0x00000040)
+#define CRYP_CR_DATATYPE_1 ((uint32_t)0x00000080)
+#define CRYP_CR_KEYSIZE ((uint32_t)0x00000300)
+#define CRYP_CR_KEYSIZE_0 ((uint32_t)0x00000100)
+#define CRYP_CR_KEYSIZE_1 ((uint32_t)0x00000200)
+#define CRYP_CR_FFLUSH ((uint32_t)0x00004000)
+#define CRYP_CR_CRYPEN ((uint32_t)0x00008000)
+/****************** Bits definition for CRYP_SR register *********************/
+#define CRYP_SR_IFEM ((uint32_t)0x00000001)
+#define CRYP_SR_IFNF ((uint32_t)0x00000002)
+#define CRYP_SR_OFNE ((uint32_t)0x00000004)
+#define CRYP_SR_OFFU ((uint32_t)0x00000008)
+#define CRYP_SR_BUSY ((uint32_t)0x00000010)
+/****************** Bits definition for CRYP_DMACR register ******************/
+#define CRYP_DMACR_DIEN ((uint32_t)0x00000001)
+#define CRYP_DMACR_DOEN ((uint32_t)0x00000002)
+/***************** Bits definition for CRYP_IMSCR register ******************/
+#define CRYP_IMSCR_INIM ((uint32_t)0x00000001)
+#define CRYP_IMSCR_OUTIM ((uint32_t)0x00000002)
+/****************** Bits definition for CRYP_RISR register *******************/
+#define CRYP_RISR_OUTRIS ((uint32_t)0x00000001)
+#define CRYP_RISR_INRIS ((uint32_t)0x00000002)
+/****************** Bits definition for CRYP_MISR register *******************/
+#define CRYP_MISR_INMIS ((uint32_t)0x00000001)
+#define CRYP_MISR_OUTMIS ((uint32_t)0x00000002)
+
+/******************************************************************************/
+/* */
+/* Digital to Analog Converter */
+/* */
+/******************************************************************************/
+/******************** Bit definition for DAC_CR register ********************/
+#define DAC_CR_EN1 ((uint32_t)0x00000001) /*!<DAC channel1 enable */
+#define DAC_CR_BOFF1 ((uint32_t)0x00000002) /*!<DAC channel1 output buffer disable */
+#define DAC_CR_TEN1 ((uint32_t)0x00000004) /*!<DAC channel1 Trigger enable */
+
+#define DAC_CR_TSEL1 ((uint32_t)0x00000038) /*!<TSEL1[2:0] (DAC channel1 Trigger selection) */
+#define DAC_CR_TSEL1_0 ((uint32_t)0x00000008) /*!<Bit 0 */
+#define DAC_CR_TSEL1_1 ((uint32_t)0x00000010) /*!<Bit 1 */
+#define DAC_CR_TSEL1_2 ((uint32_t)0x00000020) /*!<Bit 2 */
+
+#define DAC_CR_WAVE1 ((uint32_t)0x000000C0) /*!<WAVE1[1:0] (DAC channel1 noise/triangle wave generation enable) */
+#define DAC_CR_WAVE1_0 ((uint32_t)0x00000040) /*!<Bit 0 */
+#define DAC_CR_WAVE1_1 ((uint32_t)0x00000080) /*!<Bit 1 */
+
+#define DAC_CR_MAMP1 ((uint32_t)0x00000F00) /*!<MAMP1[3:0] (DAC channel1 Mask/Amplitude selector) */
+#define DAC_CR_MAMP1_0 ((uint32_t)0x00000100) /*!<Bit 0 */
+#define DAC_CR_MAMP1_1 ((uint32_t)0x00000200) /*!<Bit 1 */
+#define DAC_CR_MAMP1_2 ((uint32_t)0x00000400) /*!<Bit 2 */
+#define DAC_CR_MAMP1_3 ((uint32_t)0x00000800) /*!<Bit 3 */
+
+#define DAC_CR_DMAEN1 ((uint32_t)0x00001000) /*!<DAC channel1 DMA enable */
+#define DAC_CR_EN2 ((uint32_t)0x00010000) /*!<DAC channel2 enable */
+#define DAC_CR_BOFF2 ((uint32_t)0x00020000) /*!<DAC channel2 output buffer disable */
+#define DAC_CR_TEN2 ((uint32_t)0x00040000) /*!<DAC channel2 Trigger enable */
+
+#define DAC_CR_TSEL2 ((uint32_t)0x00380000) /*!<TSEL2[2:0] (DAC channel2 Trigger selection) */
+#define DAC_CR_TSEL2_0 ((uint32_t)0x00080000) /*!<Bit 0 */
+#define DAC_CR_TSEL2_1 ((uint32_t)0x00100000) /*!<Bit 1 */
+#define DAC_CR_TSEL2_2 ((uint32_t)0x00200000) /*!<Bit 2 */
+
+#define DAC_CR_WAVE2 ((uint32_t)0x00C00000) /*!<WAVE2[1:0] (DAC channel2 noise/triangle wave generation enable) */
+#define DAC_CR_WAVE2_0 ((uint32_t)0x00400000) /*!<Bit 0 */
+#define DAC_CR_WAVE2_1 ((uint32_t)0x00800000) /*!<Bit 1 */
+
+#define DAC_CR_MAMP2 ((uint32_t)0x0F000000) /*!<MAMP2[3:0] (DAC channel2 Mask/Amplitude selector) */
+#define DAC_CR_MAMP2_0 ((uint32_t)0x01000000) /*!<Bit 0 */
+#define DAC_CR_MAMP2_1 ((uint32_t)0x02000000) /*!<Bit 1 */
+#define DAC_CR_MAMP2_2 ((uint32_t)0x04000000) /*!<Bit 2 */
+#define DAC_CR_MAMP2_3 ((uint32_t)0x08000000) /*!<Bit 3 */
+
+#define DAC_CR_DMAEN2 ((uint32_t)0x10000000) /*!<DAC channel2 DMA enabled */
+
+/***************** Bit definition for DAC_SWTRIGR register ******************/
+#define DAC_SWTRIGR_SWTRIG1 ((uint8_t)0x01) /*!<DAC channel1 software trigger */
+#define DAC_SWTRIGR_SWTRIG2 ((uint8_t)0x02) /*!<DAC channel2 software trigger */
+
+/***************** Bit definition for DAC_DHR12R1 register ******************/
+#define DAC_DHR12R1_DACC1DHR ((uint16_t)0x0FFF) /*!<DAC channel1 12-bit Right aligned data */
+
+/***************** Bit definition for DAC_DHR12L1 register ******************/
+#define DAC_DHR12L1_DACC1DHR ((uint16_t)0xFFF0) /*!<DAC channel1 12-bit Left aligned data */
+
+/****************** Bit definition for DAC_DHR8R1 register ******************/
+#define DAC_DHR8R1_DACC1DHR ((uint8_t)0xFF) /*!<DAC channel1 8-bit Right aligned data */
+
+/***************** Bit definition for DAC_DHR12R2 register ******************/
+#define DAC_DHR12R2_DACC2DHR ((uint16_t)0x0FFF) /*!<DAC channel2 12-bit Right aligned data */
+
+/***************** Bit definition for DAC_DHR12L2 register ******************/
+#define DAC_DHR12L2_DACC2DHR ((uint16_t)0xFFF0) /*!<DAC channel2 12-bit Left aligned data */
+
+/****************** Bit definition for DAC_DHR8R2 register ******************/
+#define DAC_DHR8R2_DACC2DHR ((uint8_t)0xFF) /*!<DAC channel2 8-bit Right aligned data */
+
+/***************** Bit definition for DAC_DHR12RD register ******************/
+#define DAC_DHR12RD_DACC1DHR ((uint32_t)0x00000FFF) /*!<DAC channel1 12-bit Right aligned data */
+#define DAC_DHR12RD_DACC2DHR ((uint32_t)0x0FFF0000) /*!<DAC channel2 12-bit Right aligned data */
+
+/***************** Bit definition for DAC_DHR12LD register ******************/
+#define DAC_DHR12LD_DACC1DHR ((uint32_t)0x0000FFF0) /*!<DAC channel1 12-bit Left aligned data */
+#define DAC_DHR12LD_DACC2DHR ((uint32_t)0xFFF00000) /*!<DAC channel2 12-bit Left aligned data */
+
+/****************** Bit definition for DAC_DHR8RD register ******************/
+#define DAC_DHR8RD_DACC1DHR ((uint16_t)0x00FF) /*!<DAC channel1 8-bit Right aligned data */
+#define DAC_DHR8RD_DACC2DHR ((uint16_t)0xFF00) /*!<DAC channel2 8-bit Right aligned data */
+
+/******************* Bit definition for DAC_DOR1 register *******************/
+#define DAC_DOR1_DACC1DOR ((uint16_t)0x0FFF) /*!<DAC channel1 data output */
+
+/******************* Bit definition for DAC_DOR2 register *******************/
+#define DAC_DOR2_DACC2DOR ((uint16_t)0x0FFF) /*!<DAC channel2 data output */
+
+/******************** Bit definition for DAC_SR register ********************/
+#define DAC_SR_DMAUDR1 ((uint32_t)0x00002000) /*!<DAC channel1 DMA underrun flag */
+#define DAC_SR_DMAUDR2 ((uint32_t)0x20000000) /*!<DAC channel2 DMA underrun flag */
+
+/******************************************************************************/
+/* */
+/* Debug MCU */
+/* */
+/******************************************************************************/
+
+/******************************************************************************/
+/* */
+/* DCMI */
+/* */
+/******************************************************************************/
+/******************** Bits definition for DCMI_CR register ******************/
+#define DCMI_CR_CAPTURE ((uint32_t)0x00000001)
+#define DCMI_CR_CM ((uint32_t)0x00000002)
+#define DCMI_CR_CROP ((uint32_t)0x00000004)
+#define DCMI_CR_JPEG ((uint32_t)0x00000008)
+#define DCMI_CR_ESS ((uint32_t)0x00000010)
+#define DCMI_CR_PCKPOL ((uint32_t)0x00000020)
+#define DCMI_CR_HSPOL ((uint32_t)0x00000040)
+#define DCMI_CR_VSPOL ((uint32_t)0x00000080)
+#define DCMI_CR_FCRC_0 ((uint32_t)0x00000100)
+#define DCMI_CR_FCRC_1 ((uint32_t)0x00000200)
+#define DCMI_CR_EDM_0 ((uint32_t)0x00000400)
+#define DCMI_CR_EDM_1 ((uint32_t)0x00000800)
+#define DCMI_CR_CRE ((uint32_t)0x00001000)
+#define DCMI_CR_ENABLE ((uint32_t)0x00004000)
+
+/******************** Bits definition for DCMI_SR register ******************/
+#define DCMI_SR_HSYNC ((uint32_t)0x00000001)
+#define DCMI_SR_VSYNC ((uint32_t)0x00000002)
+#define DCMI_SR_FNE ((uint32_t)0x00000004)
+
+/******************** Bits definition for DCMI_RISR register ****************/
+#define DCMI_RISR_FRAME_RIS ((uint32_t)0x00000001)
+#define DCMI_RISR_OVF_RIS ((uint32_t)0x00000002)
+#define DCMI_RISR_ERR_RIS ((uint32_t)0x00000004)
+#define DCMI_RISR_VSYNC_RIS ((uint32_t)0x00000008)
+#define DCMI_RISR_LINE_RIS ((uint32_t)0x00000010)
+
+/******************** Bits definition for DCMI_IER register *****************/
+#define DCMI_IER_FRAME_IE ((uint32_t)0x00000001)
+#define DCMI_IER_OVF_IE ((uint32_t)0x00000002)
+#define DCMI_IER_ERR_IE ((uint32_t)0x00000004)
+#define DCMI_IER_VSYNC_IE ((uint32_t)0x00000008)
+#define DCMI_IER_LINE_IE ((uint32_t)0x00000010)
+
+/******************** Bits definition for DCMI_MISR register ****************/
+#define DCMI_MISR_FRAME_MIS ((uint32_t)0x00000001)
+#define DCMI_MISR_OVF_MIS ((uint32_t)0x00000002)
+#define DCMI_MISR_ERR_MIS ((uint32_t)0x00000004)
+#define DCMI_MISR_VSYNC_MIS ((uint32_t)0x00000008)
+#define DCMI_MISR_LINE_MIS ((uint32_t)0x00000010)
+
+/******************** Bits definition for DCMI_ICR register *****************/
+#define DCMI_ICR_FRAME_ISC ((uint32_t)0x00000001)
+#define DCMI_ICR_OVF_ISC ((uint32_t)0x00000002)
+#define DCMI_ICR_ERR_ISC ((uint32_t)0x00000004)
+#define DCMI_ICR_VSYNC_ISC ((uint32_t)0x00000008)
+#define DCMI_ICR_LINE_ISC ((uint32_t)0x00000010)
+
+/******************************************************************************/
+/* */
+/* DMA Controller */
+/* */
+/******************************************************************************/
+/******************** Bits definition for DMA_SxCR register *****************/
+#define DMA_SxCR_CHSEL ((uint32_t)0x0E000000)
+#define DMA_SxCR_CHSEL_0 ((uint32_t)0x02000000)
+#define DMA_SxCR_CHSEL_1 ((uint32_t)0x04000000)
+#define DMA_SxCR_CHSEL_2 ((uint32_t)0x08000000)
+#define DMA_SxCR_MBURST ((uint32_t)0x01800000)
+#define DMA_SxCR_MBURST_0 ((uint32_t)0x00800000)
+#define DMA_SxCR_MBURST_1 ((uint32_t)0x01000000)
+#define DMA_SxCR_PBURST ((uint32_t)0x00600000)
+#define DMA_SxCR_PBURST_0 ((uint32_t)0x00200000)
+#define DMA_SxCR_PBURST_1 ((uint32_t)0x00400000)
+#define DMA_SxCR_ACK ((uint32_t)0x00100000)
+#define DMA_SxCR_CT ((uint32_t)0x00080000)
+#define DMA_SxCR_DBM ((uint32_t)0x00040000)
+#define DMA_SxCR_PL ((uint32_t)0x00030000)
+#define DMA_SxCR_PL_0 ((uint32_t)0x00010000)
+#define DMA_SxCR_PL_1 ((uint32_t)0x00020000)
+#define DMA_SxCR_PINCOS ((uint32_t)0x00008000)
+#define DMA_SxCR_MSIZE ((uint32_t)0x00006000)
+#define DMA_SxCR_MSIZE_0 ((uint32_t)0x00002000)
+#define DMA_SxCR_MSIZE_1 ((uint32_t)0x00004000)
+#define DMA_SxCR_PSIZE ((uint32_t)0x00001800)
+#define DMA_SxCR_PSIZE_0 ((uint32_t)0x00000800)
+#define DMA_SxCR_PSIZE_1 ((uint32_t)0x00001000)
+#define DMA_SxCR_MINC ((uint32_t)0x00000400)
+#define DMA_SxCR_PINC ((uint32_t)0x00000200)
+#define DMA_SxCR_CIRC ((uint32_t)0x00000100)
+#define DMA_SxCR_DIR ((uint32_t)0x000000C0)
+#define DMA_SxCR_DIR_0 ((uint32_t)0x00000040)
+#define DMA_SxCR_DIR_1 ((uint32_t)0x00000080)
+#define DMA_SxCR_PFCTRL ((uint32_t)0x00000020)
+#define DMA_SxCR_TCIE ((uint32_t)0x00000010)
+#define DMA_SxCR_HTIE ((uint32_t)0x00000008)
+#define DMA_SxCR_TEIE ((uint32_t)0x00000004)
+#define DMA_SxCR_DMEIE ((uint32_t)0x00000002)
+#define DMA_SxCR_EN ((uint32_t)0x00000001)
+
+/******************** Bits definition for DMA_SxCNDTR register **************/
+#define DMA_SxNDT ((uint32_t)0x0000FFFF)
+#define DMA_SxNDT_0 ((uint32_t)0x00000001)
+#define DMA_SxNDT_1 ((uint32_t)0x00000002)
+#define DMA_SxNDT_2 ((uint32_t)0x00000004)
+#define DMA_SxNDT_3 ((uint32_t)0x00000008)
+#define DMA_SxNDT_4 ((uint32_t)0x00000010)
+#define DMA_SxNDT_5 ((uint32_t)0x00000020)
+#define DMA_SxNDT_6 ((uint32_t)0x00000040)
+#define DMA_SxNDT_7 ((uint32_t)0x00000080)
+#define DMA_SxNDT_8 ((uint32_t)0x00000100)
+#define DMA_SxNDT_9 ((uint32_t)0x00000200)
+#define DMA_SxNDT_10 ((uint32_t)0x00000400)
+#define DMA_SxNDT_11 ((uint32_t)0x00000800)
+#define DMA_SxNDT_12 ((uint32_t)0x00001000)
+#define DMA_SxNDT_13 ((uint32_t)0x00002000)
+#define DMA_SxNDT_14 ((uint32_t)0x00004000)
+#define DMA_SxNDT_15 ((uint32_t)0x00008000)
+
+/******************** Bits definition for DMA_SxFCR register ****************/
+#define DMA_SxFCR_FEIE ((uint32_t)0x00000080)
+#define DMA_SxFCR_FS ((uint32_t)0x00000038)
+#define DMA_SxFCR_FS_0 ((uint32_t)0x00000008)
+#define DMA_SxFCR_FS_1 ((uint32_t)0x00000010)
+#define DMA_SxFCR_FS_2 ((uint32_t)0x00000020)
+#define DMA_SxFCR_DMDIS ((uint32_t)0x00000004)
+#define DMA_SxFCR_FTH ((uint32_t)0x00000003)
+#define DMA_SxFCR_FTH_0 ((uint32_t)0x00000001)
+#define DMA_SxFCR_FTH_1 ((uint32_t)0x00000002)
+
+/******************** Bits definition for DMA_LISR register *****************/
+#define DMA_LISR_TCIF3 ((uint32_t)0x08000000)
+#define DMA_LISR_HTIF3 ((uint32_t)0x04000000)
+#define DMA_LISR_TEIF3 ((uint32_t)0x02000000)
+#define DMA_LISR_DMEIF3 ((uint32_t)0x01000000)
+#define DMA_LISR_FEIF3 ((uint32_t)0x00400000)
+#define DMA_LISR_TCIF2 ((uint32_t)0x00200000)
+#define DMA_LISR_HTIF2 ((uint32_t)0x00100000)
+#define DMA_LISR_TEIF2 ((uint32_t)0x00080000)
+#define DMA_LISR_DMEIF2 ((uint32_t)0x00040000)
+#define DMA_LISR_FEIF2 ((uint32_t)0x00010000)
+#define DMA_LISR_TCIF1 ((uint32_t)0x00000800)
+#define DMA_LISR_HTIF1 ((uint32_t)0x00000400)
+#define DMA_LISR_TEIF1 ((uint32_t)0x00000200)
+#define DMA_LISR_DMEIF1 ((uint32_t)0x00000100)
+#define DMA_LISR_FEIF1 ((uint32_t)0x00000040)
+#define DMA_LISR_TCIF0 ((uint32_t)0x00000020)
+#define DMA_LISR_HTIF0 ((uint32_t)0x00000010)
+#define DMA_LISR_TEIF0 ((uint32_t)0x00000008)
+#define DMA_LISR_DMEIF0 ((uint32_t)0x00000004)
+#define DMA_LISR_FEIF0 ((uint32_t)0x00000001)
+
+/******************** Bits definition for DMA_HISR register *****************/
+#define DMA_HISR_TCIF7 ((uint32_t)0x08000000)
+#define DMA_HISR_HTIF7 ((uint32_t)0x04000000)
+#define DMA_HISR_TEIF7 ((uint32_t)0x02000000)
+#define DMA_HISR_DMEIF7 ((uint32_t)0x01000000)
+#define DMA_HISR_FEIF7 ((uint32_t)0x00400000)
+#define DMA_HISR_TCIF6 ((uint32_t)0x00200000)
+#define DMA_HISR_HTIF6 ((uint32_t)0x00100000)
+#define DMA_HISR_TEIF6 ((uint32_t)0x00080000)
+#define DMA_HISR_DMEIF6 ((uint32_t)0x00040000)
+#define DMA_HISR_FEIF6 ((uint32_t)0x00010000)
+#define DMA_HISR_TCIF5 ((uint32_t)0x00000800)
+#define DMA_HISR_HTIF5 ((uint32_t)0x00000400)
+#define DMA_HISR_TEIF5 ((uint32_t)0x00000200)
+#define DMA_HISR_DMEIF5 ((uint32_t)0x00000100)
+#define DMA_HISR_FEIF5 ((uint32_t)0x00000040)
+#define DMA_HISR_TCIF4 ((uint32_t)0x00000020)
+#define DMA_HISR_HTIF4 ((uint32_t)0x00000010)
+#define DMA_HISR_TEIF4 ((uint32_t)0x00000008)
+#define DMA_HISR_DMEIF4 ((uint32_t)0x00000004)
+#define DMA_HISR_FEIF4 ((uint32_t)0x00000001)
+
+/******************** Bits definition for DMA_LIFCR register ****************/
+#define DMA_LIFCR_CTCIF3 ((uint32_t)0x08000000)
+#define DMA_LIFCR_CHTIF3 ((uint32_t)0x04000000)
+#define DMA_LIFCR_CTEIF3 ((uint32_t)0x02000000)
+#define DMA_LIFCR_CDMEIF3 ((uint32_t)0x01000000)
+#define DMA_LIFCR_CFEIF3 ((uint32_t)0x00400000)
+#define DMA_LIFCR_CTCIF2 ((uint32_t)0x00200000)
+#define DMA_LIFCR_CHTIF2 ((uint32_t)0x00100000)
+#define DMA_LIFCR_CTEIF2 ((uint32_t)0x00080000)
+#define DMA_LIFCR_CDMEIF2 ((uint32_t)0x00040000)
+#define DMA_LIFCR_CFEIF2 ((uint32_t)0x00010000)
+#define DMA_LIFCR_CTCIF1 ((uint32_t)0x00000800)
+#define DMA_LIFCR_CHTIF1 ((uint32_t)0x00000400)
+#define DMA_LIFCR_CTEIF1 ((uint32_t)0x00000200)
+#define DMA_LIFCR_CDMEIF1 ((uint32_t)0x00000100)
+#define DMA_LIFCR_CFEIF1 ((uint32_t)0x00000040)
+#define DMA_LIFCR_CTCIF0 ((uint32_t)0x00000020)
+#define DMA_LIFCR_CHTIF0 ((uint32_t)0x00000010)
+#define DMA_LIFCR_CTEIF0 ((uint32_t)0x00000008)
+#define DMA_LIFCR_CDMEIF0 ((uint32_t)0x00000004)
+#define DMA_LIFCR_CFEIF0 ((uint32_t)0x00000001)
+
+/******************** Bits definition for DMA_HIFCR register ****************/
+#define DMA_HIFCR_CTCIF7 ((uint32_t)0x08000000)
+#define DMA_HIFCR_CHTIF7 ((uint32_t)0x04000000)
+#define DMA_HIFCR_CTEIF7 ((uint32_t)0x02000000)
+#define DMA_HIFCR_CDMEIF7 ((uint32_t)0x01000000)
+#define DMA_HIFCR_CFEIF7 ((uint32_t)0x00400000)
+#define DMA_HIFCR_CTCIF6 ((uint32_t)0x00200000)
+#define DMA_HIFCR_CHTIF6 ((uint32_t)0x00100000)
+#define DMA_HIFCR_CTEIF6 ((uint32_t)0x00080000)
+#define DMA_HIFCR_CDMEIF6 ((uint32_t)0x00040000)
+#define DMA_HIFCR_CFEIF6 ((uint32_t)0x00010000)
+#define DMA_HIFCR_CTCIF5 ((uint32_t)0x00000800)
+#define DMA_HIFCR_CHTIF5 ((uint32_t)0x00000400)
+#define DMA_HIFCR_CTEIF5 ((uint32_t)0x00000200)
+#define DMA_HIFCR_CDMEIF5 ((uint32_t)0x00000100)
+#define DMA_HIFCR_CFEIF5 ((uint32_t)0x00000040)
+#define DMA_HIFCR_CTCIF4 ((uint32_t)0x00000020)
+#define DMA_HIFCR_CHTIF4 ((uint32_t)0x00000010)
+#define DMA_HIFCR_CTEIF4 ((uint32_t)0x00000008)
+#define DMA_HIFCR_CDMEIF4 ((uint32_t)0x00000004)
+#define DMA_HIFCR_CFEIF4 ((uint32_t)0x00000001)
+
+/******************************************************************************/
+/* */
+/* External Interrupt/Event Controller */
+/* */
+/******************************************************************************/
+/******************* Bit definition for EXTI_IMR register *******************/
+#define EXTI_IMR_MR0 ((uint32_t)0x00000001) /*!< Interrupt Mask on line 0 */
+#define EXTI_IMR_MR1 ((uint32_t)0x00000002) /*!< Interrupt Mask on line 1 */
+#define EXTI_IMR_MR2 ((uint32_t)0x00000004) /*!< Interrupt Mask on line 2 */
+#define EXTI_IMR_MR3 ((uint32_t)0x00000008) /*!< Interrupt Mask on line 3 */
+#define EXTI_IMR_MR4 ((uint32_t)0x00000010) /*!< Interrupt Mask on line 4 */
+#define EXTI_IMR_MR5 ((uint32_t)0x00000020) /*!< Interrupt Mask on line 5 */
+#define EXTI_IMR_MR6 ((uint32_t)0x00000040) /*!< Interrupt Mask on line 6 */
+#define EXTI_IMR_MR7 ((uint32_t)0x00000080) /*!< Interrupt Mask on line 7 */
+#define EXTI_IMR_MR8 ((uint32_t)0x00000100) /*!< Interrupt Mask on line 8 */
+#define EXTI_IMR_MR9 ((uint32_t)0x00000200) /*!< Interrupt Mask on line 9 */
+#define EXTI_IMR_MR10 ((uint32_t)0x00000400) /*!< Interrupt Mask on line 10 */
+#define EXTI_IMR_MR11 ((uint32_t)0x00000800) /*!< Interrupt Mask on line 11 */
+#define EXTI_IMR_MR12 ((uint32_t)0x00001000) /*!< Interrupt Mask on line 12 */
+#define EXTI_IMR_MR13 ((uint32_t)0x00002000) /*!< Interrupt Mask on line 13 */
+#define EXTI_IMR_MR14 ((uint32_t)0x00004000) /*!< Interrupt Mask on line 14 */
+#define EXTI_IMR_MR15 ((uint32_t)0x00008000) /*!< Interrupt Mask on line 15 */
+#define EXTI_IMR_MR16 ((uint32_t)0x00010000) /*!< Interrupt Mask on line 16 */
+#define EXTI_IMR_MR17 ((uint32_t)0x00020000) /*!< Interrupt Mask on line 17 */
+#define EXTI_IMR_MR18 ((uint32_t)0x00040000) /*!< Interrupt Mask on line 18 */
+#define EXTI_IMR_MR19 ((uint32_t)0x00080000) /*!< Interrupt Mask on line 19 */
+
+/******************* Bit definition for EXTI_EMR register *******************/
+#define EXTI_EMR_MR0 ((uint32_t)0x00000001) /*!< Event Mask on line 0 */
+#define EXTI_EMR_MR1 ((uint32_t)0x00000002) /*!< Event Mask on line 1 */
+#define EXTI_EMR_MR2 ((uint32_t)0x00000004) /*!< Event Mask on line 2 */
+#define EXTI_EMR_MR3 ((uint32_t)0x00000008) /*!< Event Mask on line 3 */
+#define EXTI_EMR_MR4 ((uint32_t)0x00000010) /*!< Event Mask on line 4 */
+#define EXTI_EMR_MR5 ((uint32_t)0x00000020) /*!< Event Mask on line 5 */
+#define EXTI_EMR_MR6 ((uint32_t)0x00000040) /*!< Event Mask on line 6 */
+#define EXTI_EMR_MR7 ((uint32_t)0x00000080) /*!< Event Mask on line 7 */
+#define EXTI_EMR_MR8 ((uint32_t)0x00000100) /*!< Event Mask on line 8 */
+#define EXTI_EMR_MR9 ((uint32_t)0x00000200) /*!< Event Mask on line 9 */
+#define EXTI_EMR_MR10 ((uint32_t)0x00000400) /*!< Event Mask on line 10 */
+#define EXTI_EMR_MR11 ((uint32_t)0x00000800) /*!< Event Mask on line 11 */
+#define EXTI_EMR_MR12 ((uint32_t)0x00001000) /*!< Event Mask on line 12 */
+#define EXTI_EMR_MR13 ((uint32_t)0x00002000) /*!< Event Mask on line 13 */
+#define EXTI_EMR_MR14 ((uint32_t)0x00004000) /*!< Event Mask on line 14 */
+#define EXTI_EMR_MR15 ((uint32_t)0x00008000) /*!< Event Mask on line 15 */
+#define EXTI_EMR_MR16 ((uint32_t)0x00010000) /*!< Event Mask on line 16 */
+#define EXTI_EMR_MR17 ((uint32_t)0x00020000) /*!< Event Mask on line 17 */
+#define EXTI_EMR_MR18 ((uint32_t)0x00040000) /*!< Event Mask on line 18 */
+#define EXTI_EMR_MR19 ((uint32_t)0x00080000) /*!< Event Mask on line 19 */
+
+/****************** Bit definition for EXTI_RTSR register *******************/
+#define EXTI_RTSR_TR0 ((uint32_t)0x00000001) /*!< Rising trigger event configuration bit of line 0 */
+#define EXTI_RTSR_TR1 ((uint32_t)0x00000002) /*!< Rising trigger event configuration bit of line 1 */
+#define EXTI_RTSR_TR2 ((uint32_t)0x00000004) /*!< Rising trigger event configuration bit of line 2 */
+#define EXTI_RTSR_TR3 ((uint32_t)0x00000008) /*!< Rising trigger event configuration bit of line 3 */
+#define EXTI_RTSR_TR4 ((uint32_t)0x00000010) /*!< Rising trigger event configuration bit of line 4 */
+#define EXTI_RTSR_TR5 ((uint32_t)0x00000020) /*!< Rising trigger event configuration bit of line 5 */
+#define EXTI_RTSR_TR6 ((uint32_t)0x00000040) /*!< Rising trigger event configuration bit of line 6 */
+#define EXTI_RTSR_TR7 ((uint32_t)0x00000080) /*!< Rising trigger event configuration bit of line 7 */
+#define EXTI_RTSR_TR8 ((uint32_t)0x00000100) /*!< Rising trigger event configuration bit of line 8 */
+#define EXTI_RTSR_TR9 ((uint32_t)0x00000200) /*!< Rising trigger event configuration bit of line 9 */
+#define EXTI_RTSR_TR10 ((uint32_t)0x00000400) /*!< Rising trigger event configuration bit of line 10 */
+#define EXTI_RTSR_TR11 ((uint32_t)0x00000800) /*!< Rising trigger event configuration bit of line 11 */
+#define EXTI_RTSR_TR12 ((uint32_t)0x00001000) /*!< Rising trigger event configuration bit of line 12 */
+#define EXTI_RTSR_TR13 ((uint32_t)0x00002000) /*!< Rising trigger event configuration bit of line 13 */
+#define EXTI_RTSR_TR14 ((uint32_t)0x00004000) /*!< Rising trigger event configuration bit of line 14 */
+#define EXTI_RTSR_TR15 ((uint32_t)0x00008000) /*!< Rising trigger event configuration bit of line 15 */
+#define EXTI_RTSR_TR16 ((uint32_t)0x00010000) /*!< Rising trigger event configuration bit of line 16 */
+#define EXTI_RTSR_TR17 ((uint32_t)0x00020000) /*!< Rising trigger event configuration bit of line 17 */
+#define EXTI_RTSR_TR18 ((uint32_t)0x00040000) /*!< Rising trigger event configuration bit of line 18 */
+#define EXTI_RTSR_TR19 ((uint32_t)0x00080000) /*!< Rising trigger event configuration bit of line 19 */
+
+/****************** Bit definition for EXTI_FTSR register *******************/
+#define EXTI_FTSR_TR0 ((uint32_t)0x00000001) /*!< Falling trigger event configuration bit of line 0 */
+#define EXTI_FTSR_TR1 ((uint32_t)0x00000002) /*!< Falling trigger event configuration bit of line 1 */
+#define EXTI_FTSR_TR2 ((uint32_t)0x00000004) /*!< Falling trigger event configuration bit of line 2 */
+#define EXTI_FTSR_TR3 ((uint32_t)0x00000008) /*!< Falling trigger event configuration bit of line 3 */
+#define EXTI_FTSR_TR4 ((uint32_t)0x00000010) /*!< Falling trigger event configuration bit of line 4 */
+#define EXTI_FTSR_TR5 ((uint32_t)0x00000020) /*!< Falling trigger event configuration bit of line 5 */
+#define EXTI_FTSR_TR6 ((uint32_t)0x00000040) /*!< Falling trigger event configuration bit of line 6 */
+#define EXTI_FTSR_TR7 ((uint32_t)0x00000080) /*!< Falling trigger event configuration bit of line 7 */
+#define EXTI_FTSR_TR8 ((uint32_t)0x00000100) /*!< Falling trigger event configuration bit of line 8 */
+#define EXTI_FTSR_TR9 ((uint32_t)0x00000200) /*!< Falling trigger event configuration bit of line 9 */
+#define EXTI_FTSR_TR10 ((uint32_t)0x00000400) /*!< Falling trigger event configuration bit of line 10 */
+#define EXTI_FTSR_TR11 ((uint32_t)0x00000800) /*!< Falling trigger event configuration bit of line 11 */
+#define EXTI_FTSR_TR12 ((uint32_t)0x00001000) /*!< Falling trigger event configuration bit of line 12 */
+#define EXTI_FTSR_TR13 ((uint32_t)0x00002000) /*!< Falling trigger event configuration bit of line 13 */
+#define EXTI_FTSR_TR14 ((uint32_t)0x00004000) /*!< Falling trigger event configuration bit of line 14 */
+#define EXTI_FTSR_TR15 ((uint32_t)0x00008000) /*!< Falling trigger event configuration bit of line 15 */
+#define EXTI_FTSR_TR16 ((uint32_t)0x00010000) /*!< Falling trigger event configuration bit of line 16 */
+#define EXTI_FTSR_TR17 ((uint32_t)0x00020000) /*!< Falling trigger event configuration bit of line 17 */
+#define EXTI_FTSR_TR18 ((uint32_t)0x00040000) /*!< Falling trigger event configuration bit of line 18 */
+#define EXTI_FTSR_TR19 ((uint32_t)0x00080000) /*!< Falling trigger event configuration bit of line 19 */
+
+/****************** Bit definition for EXTI_SWIER register ******************/
+#define EXTI_SWIER_SWIER0 ((uint32_t)0x00000001) /*!< Software Interrupt on line 0 */
+#define EXTI_SWIER_SWIER1 ((uint32_t)0x00000002) /*!< Software Interrupt on line 1 */
+#define EXTI_SWIER_SWIER2 ((uint32_t)0x00000004) /*!< Software Interrupt on line 2 */
+#define EXTI_SWIER_SWIER3 ((uint32_t)0x00000008) /*!< Software Interrupt on line 3 */
+#define EXTI_SWIER_SWIER4 ((uint32_t)0x00000010) /*!< Software Interrupt on line 4 */
+#define EXTI_SWIER_SWIER5 ((uint32_t)0x00000020) /*!< Software Interrupt on line 5 */
+#define EXTI_SWIER_SWIER6 ((uint32_t)0x00000040) /*!< Software Interrupt on line 6 */
+#define EXTI_SWIER_SWIER7 ((uint32_t)0x00000080) /*!< Software Interrupt on line 7 */
+#define EXTI_SWIER_SWIER8 ((uint32_t)0x00000100) /*!< Software Interrupt on line 8 */
+#define EXTI_SWIER_SWIER9 ((uint32_t)0x00000200) /*!< Software Interrupt on line 9 */
+#define EXTI_SWIER_SWIER10 ((uint32_t)0x00000400) /*!< Software Interrupt on line 10 */
+#define EXTI_SWIER_SWIER11 ((uint32_t)0x00000800) /*!< Software Interrupt on line 11 */
+#define EXTI_SWIER_SWIER12 ((uint32_t)0x00001000) /*!< Software Interrupt on line 12 */
+#define EXTI_SWIER_SWIER13 ((uint32_t)0x00002000) /*!< Software Interrupt on line 13 */
+#define EXTI_SWIER_SWIER14 ((uint32_t)0x00004000) /*!< Software Interrupt on line 14 */
+#define EXTI_SWIER_SWIER15 ((uint32_t)0x00008000) /*!< Software Interrupt on line 15 */
+#define EXTI_SWIER_SWIER16 ((uint32_t)0x00010000) /*!< Software Interrupt on line 16 */
+#define EXTI_SWIER_SWIER17 ((uint32_t)0x00020000) /*!< Software Interrupt on line 17 */
+#define EXTI_SWIER_SWIER18 ((uint32_t)0x00040000) /*!< Software Interrupt on line 18 */
+#define EXTI_SWIER_SWIER19 ((uint32_t)0x00080000) /*!< Software Interrupt on line 19 */
+
+/******************* Bit definition for EXTI_PR register ********************/
+#define EXTI_PR_PR0 ((uint32_t)0x00000001) /*!< Pending bit for line 0 */
+#define EXTI_PR_PR1 ((uint32_t)0x00000002) /*!< Pending bit for line 1 */
+#define EXTI_PR_PR2 ((uint32_t)0x00000004) /*!< Pending bit for line 2 */
+#define EXTI_PR_PR3 ((uint32_t)0x00000008) /*!< Pending bit for line 3 */
+#define EXTI_PR_PR4 ((uint32_t)0x00000010) /*!< Pending bit for line 4 */
+#define EXTI_PR_PR5 ((uint32_t)0x00000020) /*!< Pending bit for line 5 */
+#define EXTI_PR_PR6 ((uint32_t)0x00000040) /*!< Pending bit for line 6 */
+#define EXTI_PR_PR7 ((uint32_t)0x00000080) /*!< Pending bit for line 7 */
+#define EXTI_PR_PR8 ((uint32_t)0x00000100) /*!< Pending bit for line 8 */
+#define EXTI_PR_PR9 ((uint32_t)0x00000200) /*!< Pending bit for line 9 */
+#define EXTI_PR_PR10 ((uint32_t)0x00000400) /*!< Pending bit for line 10 */
+#define EXTI_PR_PR11 ((uint32_t)0x00000800) /*!< Pending bit for line 11 */
+#define EXTI_PR_PR12 ((uint32_t)0x00001000) /*!< Pending bit for line 12 */
+#define EXTI_PR_PR13 ((uint32_t)0x00002000) /*!< Pending bit for line 13 */
+#define EXTI_PR_PR14 ((uint32_t)0x00004000) /*!< Pending bit for line 14 */
+#define EXTI_PR_PR15 ((uint32_t)0x00008000) /*!< Pending bit for line 15 */
+#define EXTI_PR_PR16 ((uint32_t)0x00010000) /*!< Pending bit for line 16 */
+#define EXTI_PR_PR17 ((uint32_t)0x00020000) /*!< Pending bit for line 17 */
+#define EXTI_PR_PR18 ((uint32_t)0x00040000) /*!< Pending bit for line 18 */
+#define EXTI_PR_PR19 ((uint32_t)0x00080000) /*!< Pending bit for line 19 */
+
+/******************************************************************************/
+/* */
+/* FLASH */
+/* */
+/******************************************************************************/
+/******************* Bits definition for FLASH_ACR register *****************/
+#define FLASH_ACR_LATENCY ((uint32_t)0x00000007)
+#define FLASH_ACR_LATENCY_0WS ((uint32_t)0x00000000)
+#define FLASH_ACR_LATENCY_1WS ((uint32_t)0x00000001)
+#define FLASH_ACR_LATENCY_2WS ((uint32_t)0x00000002)
+#define FLASH_ACR_LATENCY_3WS ((uint32_t)0x00000003)
+#define FLASH_ACR_LATENCY_4WS ((uint32_t)0x00000004)
+#define FLASH_ACR_LATENCY_5WS ((uint32_t)0x00000005)
+#define FLASH_ACR_LATENCY_6WS ((uint32_t)0x00000006)
+#define FLASH_ACR_LATENCY_7WS ((uint32_t)0x00000007)
+
+#define FLASH_ACR_PRFTEN ((uint32_t)0x00000100)
+#define FLASH_ACR_ICEN ((uint32_t)0x00000200)
+#define FLASH_ACR_DCEN ((uint32_t)0x00000400)
+#define FLASH_ACR_ICRST ((uint32_t)0x00000800)
+#define FLASH_ACR_DCRST ((uint32_t)0x00001000)
+#define FLASH_ACR_BYTE0_ADDRESS ((uint32_t)0x40023C00)
+#define FLASH_ACR_BYTE2_ADDRESS ((uint32_t)0x40023C03)
+
+/******************* Bits definition for FLASH_SR register ******************/
+#define FLASH_SR_EOP ((uint32_t)0x00000001)
+#define FLASH_SR_SOP ((uint32_t)0x00000002)
+#define FLASH_SR_WRPERR ((uint32_t)0x00000010)
+#define FLASH_SR_PGAERR ((uint32_t)0x00000020)
+#define FLASH_SR_PGPERR ((uint32_t)0x00000040)
+#define FLASH_SR_PGSERR ((uint32_t)0x00000080)
+#define FLASH_SR_BSY ((uint32_t)0x00010000)
+
+/******************* Bits definition for FLASH_CR register ******************/
+#define FLASH_CR_PG ((uint32_t)0x00000001)
+#define FLASH_CR_SER ((uint32_t)0x00000002)
+#define FLASH_CR_MER ((uint32_t)0x00000004)
+#define FLASH_CR_SNB_0 ((uint32_t)0x00000008)
+#define FLASH_CR_SNB_1 ((uint32_t)0x00000010)
+#define FLASH_CR_SNB_2 ((uint32_t)0x00000020)
+#define FLASH_CR_SNB_3 ((uint32_t)0x00000040)
+#define FLASH_CR_PSIZE_0 ((uint32_t)0x00000100)
+#define FLASH_CR_PSIZE_1 ((uint32_t)0x00000200)
+#define FLASH_CR_STRT ((uint32_t)0x00010000)
+#define FLASH_CR_EOPIE ((uint32_t)0x01000000)
+#define FLASH_CR_LOCK ((uint32_t)0x80000000)
+
+/******************* Bits definition for FLASH_OPTCR register ***************/
+#define FLASH_OPTCR_OPTLOCK ((uint32_t)0x00000001)
+#define FLASH_OPTCR_OPTSTRT ((uint32_t)0x00000002)
+#define FLASH_OPTCR_BOR_LEV_0 ((uint32_t)0x00000004)
+#define FLASH_OPTCR_BOR_LEV_1 ((uint32_t)0x00000008)
+#define FLASH_OPTCR_BOR_LEV ((uint32_t)0x0000000C)
+#define FLASH_OPTCR_WDG_SW ((uint32_t)0x00000020)
+#define FLASH_OPTCR_nRST_STOP ((uint32_t)0x00000040)
+#define FLASH_OPTCR_nRST_STDBY ((uint32_t)0x00000080)
+#define FLASH_OPTCR_RDP_0 ((uint32_t)0x00000100)
+#define FLASH_OPTCR_RDP_1 ((uint32_t)0x00000200)
+#define FLASH_OPTCR_RDP_2 ((uint32_t)0x00000400)
+#define FLASH_OPTCR_RDP_3 ((uint32_t)0x00000800)
+#define FLASH_OPTCR_RDP_4 ((uint32_t)0x00001000)
+#define FLASH_OPTCR_RDP_5 ((uint32_t)0x00002000)
+#define FLASH_OPTCR_RDP_6 ((uint32_t)0x00004000)
+#define FLASH_OPTCR_RDP_7 ((uint32_t)0x00008000)
+#define FLASH_OPTCR_nWRP_0 ((uint32_t)0x00010000)
+#define FLASH_OPTCR_nWRP_1 ((uint32_t)0x00020000)
+#define FLASH_OPTCR_nWRP_2 ((uint32_t)0x00040000)
+#define FLASH_OPTCR_nWRP_3 ((uint32_t)0x00080000)
+#define FLASH_OPTCR_nWRP_4 ((uint32_t)0x00100000)
+#define FLASH_OPTCR_nWRP_5 ((uint32_t)0x00200000)
+#define FLASH_OPTCR_nWRP_6 ((uint32_t)0x00400000)
+#define FLASH_OPTCR_nWRP_7 ((uint32_t)0x00800000)
+#define FLASH_OPTCR_nWRP_8 ((uint32_t)0x01000000)
+#define FLASH_OPTCR_nWRP_9 ((uint32_t)0x02000000)
+#define FLASH_OPTCR_nWRP_10 ((uint32_t)0x04000000)
+#define FLASH_OPTCR_nWRP_11 ((uint32_t)0x08000000)
+
+/******************************************************************************/
+/* */
+/* Flexible Static Memory Controller */
+/* */
+/******************************************************************************/
+/****************** Bit definition for FSMC_BCR1 register *******************/
+#define FSMC_BCR1_MBKEN ((uint32_t)0x00000001) /*!<Memory bank enable bit */
+#define FSMC_BCR1_MUXEN ((uint32_t)0x00000002) /*!<Address/data multiplexing enable bit */
+
+#define FSMC_BCR1_MTYP ((uint32_t)0x0000000C) /*!<MTYP[1:0] bits (Memory type) */
+#define FSMC_BCR1_MTYP_0 ((uint32_t)0x00000004) /*!<Bit 0 */
+#define FSMC_BCR1_MTYP_1 ((uint32_t)0x00000008) /*!<Bit 1 */
+
+#define FSMC_BCR1_MWID ((uint32_t)0x00000030) /*!<MWID[1:0] bits (Memory data bus width) */
+#define FSMC_BCR1_MWID_0 ((uint32_t)0x00000010) /*!<Bit 0 */
+#define FSMC_BCR1_MWID_1 ((uint32_t)0x00000020) /*!<Bit 1 */
+
+#define FSMC_BCR1_FACCEN ((uint32_t)0x00000040) /*!<Flash access enable */
+#define FSMC_BCR1_BURSTEN ((uint32_t)0x00000100) /*!<Burst enable bit */
+#define FSMC_BCR1_WAITPOL ((uint32_t)0x00000200) /*!<Wait signal polarity bit */
+#define FSMC_BCR1_WRAPMOD ((uint32_t)0x00000400) /*!<Wrapped burst mode support */
+#define FSMC_BCR1_WAITCFG ((uint32_t)0x00000800) /*!<Wait timing configuration */
+#define FSMC_BCR1_WREN ((uint32_t)0x00001000) /*!<Write enable bit */
+#define FSMC_BCR1_WAITEN ((uint32_t)0x00002000) /*!<Wait enable bit */
+#define FSMC_BCR1_EXTMOD ((uint32_t)0x00004000) /*!<Extended mode enable */
+#define FSMC_BCR1_ASYNCWAIT ((uint32_t)0x00008000) /*!<Asynchronous wait */
+#define FSMC_BCR1_CBURSTRW ((uint32_t)0x00080000) /*!<Write burst enable */
+
+/****************** Bit definition for FSMC_BCR2 register *******************/
+#define FSMC_BCR2_MBKEN ((uint32_t)0x00000001) /*!<Memory bank enable bit */
+#define FSMC_BCR2_MUXEN ((uint32_t)0x00000002) /*!<Address/data multiplexing enable bit */
+
+#define FSMC_BCR2_MTYP ((uint32_t)0x0000000C) /*!<MTYP[1:0] bits (Memory type) */
+#define FSMC_BCR2_MTYP_0 ((uint32_t)0x00000004) /*!<Bit 0 */
+#define FSMC_BCR2_MTYP_1 ((uint32_t)0x00000008) /*!<Bit 1 */
+
+#define FSMC_BCR2_MWID ((uint32_t)0x00000030) /*!<MWID[1:0] bits (Memory data bus width) */
+#define FSMC_BCR2_MWID_0 ((uint32_t)0x00000010) /*!<Bit 0 */
+#define FSMC_BCR2_MWID_1 ((uint32_t)0x00000020) /*!<Bit 1 */
+
+#define FSMC_BCR2_FACCEN ((uint32_t)0x00000040) /*!<Flash access enable */
+#define FSMC_BCR2_BURSTEN ((uint32_t)0x00000100) /*!<Burst enable bit */
+#define FSMC_BCR2_WAITPOL ((uint32_t)0x00000200) /*!<Wait signal polarity bit */
+#define FSMC_BCR2_WRAPMOD ((uint32_t)0x00000400) /*!<Wrapped burst mode support */
+#define FSMC_BCR2_WAITCFG ((uint32_t)0x00000800) /*!<Wait timing configuration */
+#define FSMC_BCR2_WREN ((uint32_t)0x00001000) /*!<Write enable bit */
+#define FSMC_BCR2_WAITEN ((uint32_t)0x00002000) /*!<Wait enable bit */
+#define FSMC_BCR2_EXTMOD ((uint32_t)0x00004000) /*!<Extended mode enable */
+#define FSMC_BCR2_ASYNCWAIT ((uint32_t)0x00008000) /*!<Asynchronous wait */
+#define FSMC_BCR2_CBURSTRW ((uint32_t)0x00080000) /*!<Write burst enable */
+
+/****************** Bit definition for FSMC_BCR3 register *******************/
+#define FSMC_BCR3_MBKEN ((uint32_t)0x00000001) /*!<Memory bank enable bit */
+#define FSMC_BCR3_MUXEN ((uint32_t)0x00000002) /*!<Address/data multiplexing enable bit */
+
+#define FSMC_BCR3_MTYP ((uint32_t)0x0000000C) /*!<MTYP[1:0] bits (Memory type) */
+#define FSMC_BCR3_MTYP_0 ((uint32_t)0x00000004) /*!<Bit 0 */
+#define FSMC_BCR3_MTYP_1 ((uint32_t)0x00000008) /*!<Bit 1 */
+
+#define FSMC_BCR3_MWID ((uint32_t)0x00000030) /*!<MWID[1:0] bits (Memory data bus width) */
+#define FSMC_BCR3_MWID_0 ((uint32_t)0x00000010) /*!<Bit 0 */
+#define FSMC_BCR3_MWID_1 ((uint32_t)0x00000020) /*!<Bit 1 */
+
+#define FSMC_BCR3_FACCEN ((uint32_t)0x00000040) /*!<Flash access enable */
+#define FSMC_BCR3_BURSTEN ((uint32_t)0x00000100) /*!<Burst enable bit */
+#define FSMC_BCR3_WAITPOL ((uint32_t)0x00000200) /*!<Wait signal polarity bit. */
+#define FSMC_BCR3_WRAPMOD ((uint32_t)0x00000400) /*!<Wrapped burst mode support */
+#define FSMC_BCR3_WAITCFG ((uint32_t)0x00000800) /*!<Wait timing configuration */
+#define FSMC_BCR3_WREN ((uint32_t)0x00001000) /*!<Write enable bit */
+#define FSMC_BCR3_WAITEN ((uint32_t)0x00002000) /*!<Wait enable bit */
+#define FSMC_BCR3_EXTMOD ((uint32_t)0x00004000) /*!<Extended mode enable */
+#define FSMC_BCR3_ASYNCWAIT ((uint32_t)0x00008000) /*!<Asynchronous wait */
+#define FSMC_BCR3_CBURSTRW ((uint32_t)0x00080000) /*!<Write burst enable */
+
+/****************** Bit definition for FSMC_BCR4 register *******************/
+#define FSMC_BCR4_MBKEN ((uint32_t)0x00000001) /*!<Memory bank enable bit */
+#define FSMC_BCR4_MUXEN ((uint32_t)0x00000002) /*!<Address/data multiplexing enable bit */
+
+#define FSMC_BCR4_MTYP ((uint32_t)0x0000000C) /*!<MTYP[1:0] bits (Memory type) */
+#define FSMC_BCR4_MTYP_0 ((uint32_t)0x00000004) /*!<Bit 0 */
+#define FSMC_BCR4_MTYP_1 ((uint32_t)0x00000008) /*!<Bit 1 */
+
+#define FSMC_BCR4_MWID ((uint32_t)0x00000030) /*!<MWID[1:0] bits (Memory data bus width) */
+#define FSMC_BCR4_MWID_0 ((uint32_t)0x00000010) /*!<Bit 0 */
+#define FSMC_BCR4_MWID_1 ((uint32_t)0x00000020) /*!<Bit 1 */
+
+#define FSMC_BCR4_FACCEN ((uint32_t)0x00000040) /*!<Flash access enable */
+#define FSMC_BCR4_BURSTEN ((uint32_t)0x00000100) /*!<Burst enable bit */
+#define FSMC_BCR4_WAITPOL ((uint32_t)0x00000200) /*!<Wait signal polarity bit */
+#define FSMC_BCR4_WRAPMOD ((uint32_t)0x00000400) /*!<Wrapped burst mode support */
+#define FSMC_BCR4_WAITCFG ((uint32_t)0x00000800) /*!<Wait timing configuration */
+#define FSMC_BCR4_WREN ((uint32_t)0x00001000) /*!<Write enable bit */
+#define FSMC_BCR4_WAITEN ((uint32_t)0x00002000) /*!<Wait enable bit */
+#define FSMC_BCR4_EXTMOD ((uint32_t)0x00004000) /*!<Extended mode enable */
+#define FSMC_BCR4_ASYNCWAIT ((uint32_t)0x00008000) /*!<Asynchronous wait */
+#define FSMC_BCR4_CBURSTRW ((uint32_t)0x00080000) /*!<Write burst enable */
+
+/****************** Bit definition for FSMC_BTR1 register ******************/
+#define FSMC_BTR1_ADDSET ((uint32_t)0x0000000F) /*!<ADDSET[3:0] bits (Address setup phase duration) */
+#define FSMC_BTR1_ADDSET_0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define FSMC_BTR1_ADDSET_1 ((uint32_t)0x00000002) /*!<Bit 1 */
+#define FSMC_BTR1_ADDSET_2 ((uint32_t)0x00000004) /*!<Bit 2 */
+#define FSMC_BTR1_ADDSET_3 ((uint32_t)0x00000008) /*!<Bit 3 */
+
+#define FSMC_BTR1_ADDHLD ((uint32_t)0x000000F0) /*!<ADDHLD[3:0] bits (Address-hold phase duration) */
+#define FSMC_BTR1_ADDHLD_0 ((uint32_t)0x00000010) /*!<Bit 0 */
+#define FSMC_BTR1_ADDHLD_1 ((uint32_t)0x00000020) /*!<Bit 1 */
+#define FSMC_BTR1_ADDHLD_2 ((uint32_t)0x00000040) /*!<Bit 2 */
+#define FSMC_BTR1_ADDHLD_3 ((uint32_t)0x00000080) /*!<Bit 3 */
+
+#define FSMC_BTR1_DATAST ((uint32_t)0x0000FF00) /*!<DATAST [3:0] bits (Data-phase duration) */
+#define FSMC_BTR1_DATAST_0 ((uint32_t)0x00000100) /*!<Bit 0 */
+#define FSMC_BTR1_DATAST_1 ((uint32_t)0x00000200) /*!<Bit 1 */
+#define FSMC_BTR1_DATAST_2 ((uint32_t)0x00000400) /*!<Bit 2 */
+#define FSMC_BTR1_DATAST_3 ((uint32_t)0x00000800) /*!<Bit 3 */
+
+#define FSMC_BTR1_BUSTURN ((uint32_t)0x000F0000) /*!<BUSTURN[3:0] bits (Bus turnaround phase duration) */
+#define FSMC_BTR1_BUSTURN_0 ((uint32_t)0x00010000) /*!<Bit 0 */
+#define FSMC_BTR1_BUSTURN_1 ((uint32_t)0x00020000) /*!<Bit 1 */
+#define FSMC_BTR1_BUSTURN_2 ((uint32_t)0x00040000) /*!<Bit 2 */
+#define FSMC_BTR1_BUSTURN_3 ((uint32_t)0x00080000) /*!<Bit 3 */
+
+#define FSMC_BTR1_CLKDIV ((uint32_t)0x00F00000) /*!<CLKDIV[3:0] bits (Clock divide ratio) */
+#define FSMC_BTR1_CLKDIV_0 ((uint32_t)0x00100000) /*!<Bit 0 */
+#define FSMC_BTR1_CLKDIV_1 ((uint32_t)0x00200000) /*!<Bit 1 */
+#define FSMC_BTR1_CLKDIV_2 ((uint32_t)0x00400000) /*!<Bit 2 */
+#define FSMC_BTR1_CLKDIV_3 ((uint32_t)0x00800000) /*!<Bit 3 */
+
+#define FSMC_BTR1_DATLAT ((uint32_t)0x0F000000) /*!<DATLA[3:0] bits (Data latency) */
+#define FSMC_BTR1_DATLAT_0 ((uint32_t)0x01000000) /*!<Bit 0 */
+#define FSMC_BTR1_DATLAT_1 ((uint32_t)0x02000000) /*!<Bit 1 */
+#define FSMC_BTR1_DATLAT_2 ((uint32_t)0x04000000) /*!<Bit 2 */
+#define FSMC_BTR1_DATLAT_3 ((uint32_t)0x08000000) /*!<Bit 3 */
+
+#define FSMC_BTR1_ACCMOD ((uint32_t)0x30000000) /*!<ACCMOD[1:0] bits (Access mode) */
+#define FSMC_BTR1_ACCMOD_0 ((uint32_t)0x10000000) /*!<Bit 0 */
+#define FSMC_BTR1_ACCMOD_1 ((uint32_t)0x20000000) /*!<Bit 1 */
+
+/****************** Bit definition for FSMC_BTR2 register *******************/
+#define FSMC_BTR2_ADDSET ((uint32_t)0x0000000F) /*!<ADDSET[3:0] bits (Address setup phase duration) */
+#define FSMC_BTR2_ADDSET_0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define FSMC_BTR2_ADDSET_1 ((uint32_t)0x00000002) /*!<Bit 1 */
+#define FSMC_BTR2_ADDSET_2 ((uint32_t)0x00000004) /*!<Bit 2 */
+#define FSMC_BTR2_ADDSET_3 ((uint32_t)0x00000008) /*!<Bit 3 */
+
+#define FSMC_BTR2_ADDHLD ((uint32_t)0x000000F0) /*!<ADDHLD[3:0] bits (Address-hold phase duration) */
+#define FSMC_BTR2_ADDHLD_0 ((uint32_t)0x00000010) /*!<Bit 0 */
+#define FSMC_BTR2_ADDHLD_1 ((uint32_t)0x00000020) /*!<Bit 1 */
+#define FSMC_BTR2_ADDHLD_2 ((uint32_t)0x00000040) /*!<Bit 2 */
+#define FSMC_BTR2_ADDHLD_3 ((uint32_t)0x00000080) /*!<Bit 3 */
+
+#define FSMC_BTR2_DATAST ((uint32_t)0x0000FF00) /*!<DATAST [3:0] bits (Data-phase duration) */
+#define FSMC_BTR2_DATAST_0 ((uint32_t)0x00000100) /*!<Bit 0 */
+#define FSMC_BTR2_DATAST_1 ((uint32_t)0x00000200) /*!<Bit 1 */
+#define FSMC_BTR2_DATAST_2 ((uint32_t)0x00000400) /*!<Bit 2 */
+#define FSMC_BTR2_DATAST_3 ((uint32_t)0x00000800) /*!<Bit 3 */
+
+#define FSMC_BTR2_BUSTURN ((uint32_t)0x000F0000) /*!<BUSTURN[3:0] bits (Bus turnaround phase duration) */
+#define FSMC_BTR2_BUSTURN_0 ((uint32_t)0x00010000) /*!<Bit 0 */
+#define FSMC_BTR2_BUSTURN_1 ((uint32_t)0x00020000) /*!<Bit 1 */
+#define FSMC_BTR2_BUSTURN_2 ((uint32_t)0x00040000) /*!<Bit 2 */
+#define FSMC_BTR2_BUSTURN_3 ((uint32_t)0x00080000) /*!<Bit 3 */
+
+#define FSMC_BTR2_CLKDIV ((uint32_t)0x00F00000) /*!<CLKDIV[3:0] bits (Clock divide ratio) */
+#define FSMC_BTR2_CLKDIV_0 ((uint32_t)0x00100000) /*!<Bit 0 */
+#define FSMC_BTR2_CLKDIV_1 ((uint32_t)0x00200000) /*!<Bit 1 */
+#define FSMC_BTR2_CLKDIV_2 ((uint32_t)0x00400000) /*!<Bit 2 */
+#define FSMC_BTR2_CLKDIV_3 ((uint32_t)0x00800000) /*!<Bit 3 */
+
+#define FSMC_BTR2_DATLAT ((uint32_t)0x0F000000) /*!<DATLA[3:0] bits (Data latency) */
+#define FSMC_BTR2_DATLAT_0 ((uint32_t)0x01000000) /*!<Bit 0 */
+#define FSMC_BTR2_DATLAT_1 ((uint32_t)0x02000000) /*!<Bit 1 */
+#define FSMC_BTR2_DATLAT_2 ((uint32_t)0x04000000) /*!<Bit 2 */
+#define FSMC_BTR2_DATLAT_3 ((uint32_t)0x08000000) /*!<Bit 3 */
+
+#define FSMC_BTR2_ACCMOD ((uint32_t)0x30000000) /*!<ACCMOD[1:0] bits (Access mode) */
+#define FSMC_BTR2_ACCMOD_0 ((uint32_t)0x10000000) /*!<Bit 0 */
+#define FSMC_BTR2_ACCMOD_1 ((uint32_t)0x20000000) /*!<Bit 1 */
+
+/******************* Bit definition for FSMC_BTR3 register *******************/
+#define FSMC_BTR3_ADDSET ((uint32_t)0x0000000F) /*!<ADDSET[3:0] bits (Address setup phase duration) */
+#define FSMC_BTR3_ADDSET_0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define FSMC_BTR3_ADDSET_1 ((uint32_t)0x00000002) /*!<Bit 1 */
+#define FSMC_BTR3_ADDSET_2 ((uint32_t)0x00000004) /*!<Bit 2 */
+#define FSMC_BTR3_ADDSET_3 ((uint32_t)0x00000008) /*!<Bit 3 */
+
+#define FSMC_BTR3_ADDHLD ((uint32_t)0x000000F0) /*!<ADDHLD[3:0] bits (Address-hold phase duration) */
+#define FSMC_BTR3_ADDHLD_0 ((uint32_t)0x00000010) /*!<Bit 0 */
+#define FSMC_BTR3_ADDHLD_1 ((uint32_t)0x00000020) /*!<Bit 1 */
+#define FSMC_BTR3_ADDHLD_2 ((uint32_t)0x00000040) /*!<Bit 2 */
+#define FSMC_BTR3_ADDHLD_3 ((uint32_t)0x00000080) /*!<Bit 3 */
+
+#define FSMC_BTR3_DATAST ((uint32_t)0x0000FF00) /*!<DATAST [3:0] bits (Data-phase duration) */
+#define FSMC_BTR3_DATAST_0 ((uint32_t)0x00000100) /*!<Bit 0 */
+#define FSMC_BTR3_DATAST_1 ((uint32_t)0x00000200) /*!<Bit 1 */
+#define FSMC_BTR3_DATAST_2 ((uint32_t)0x00000400) /*!<Bit 2 */
+#define FSMC_BTR3_DATAST_3 ((uint32_t)0x00000800) /*!<Bit 3 */
+
+#define FSMC_BTR3_BUSTURN ((uint32_t)0x000F0000) /*!<BUSTURN[3:0] bits (Bus turnaround phase duration) */
+#define FSMC_BTR3_BUSTURN_0 ((uint32_t)0x00010000) /*!<Bit 0 */
+#define FSMC_BTR3_BUSTURN_1 ((uint32_t)0x00020000) /*!<Bit 1 */
+#define FSMC_BTR3_BUSTURN_2 ((uint32_t)0x00040000) /*!<Bit 2 */
+#define FSMC_BTR3_BUSTURN_3 ((uint32_t)0x00080000) /*!<Bit 3 */
+
+#define FSMC_BTR3_CLKDIV ((uint32_t)0x00F00000) /*!<CLKDIV[3:0] bits (Clock divide ratio) */
+#define FSMC_BTR3_CLKDIV_0 ((uint32_t)0x00100000) /*!<Bit 0 */
+#define FSMC_BTR3_CLKDIV_1 ((uint32_t)0x00200000) /*!<Bit 1 */
+#define FSMC_BTR3_CLKDIV_2 ((uint32_t)0x00400000) /*!<Bit 2 */
+#define FSMC_BTR3_CLKDIV_3 ((uint32_t)0x00800000) /*!<Bit 3 */
+
+#define FSMC_BTR3_DATLAT ((uint32_t)0x0F000000) /*!<DATLA[3:0] bits (Data latency) */
+#define FSMC_BTR3_DATLAT_0 ((uint32_t)0x01000000) /*!<Bit 0 */
+#define FSMC_BTR3_DATLAT_1 ((uint32_t)0x02000000) /*!<Bit 1 */
+#define FSMC_BTR3_DATLAT_2 ((uint32_t)0x04000000) /*!<Bit 2 */
+#define FSMC_BTR3_DATLAT_3 ((uint32_t)0x08000000) /*!<Bit 3 */
+
+#define FSMC_BTR3_ACCMOD ((uint32_t)0x30000000) /*!<ACCMOD[1:0] bits (Access mode) */
+#define FSMC_BTR3_ACCMOD_0 ((uint32_t)0x10000000) /*!<Bit 0 */
+#define FSMC_BTR3_ACCMOD_1 ((uint32_t)0x20000000) /*!<Bit 1 */
+
+/****************** Bit definition for FSMC_BTR4 register *******************/
+#define FSMC_BTR4_ADDSET ((uint32_t)0x0000000F) /*!<ADDSET[3:0] bits (Address setup phase duration) */
+#define FSMC_BTR4_ADDSET_0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define FSMC_BTR4_ADDSET_1 ((uint32_t)0x00000002) /*!<Bit 1 */
+#define FSMC_BTR4_ADDSET_2 ((uint32_t)0x00000004) /*!<Bit 2 */
+#define FSMC_BTR4_ADDSET_3 ((uint32_t)0x00000008) /*!<Bit 3 */
+
+#define FSMC_BTR4_ADDHLD ((uint32_t)0x000000F0) /*!<ADDHLD[3:0] bits (Address-hold phase duration) */
+#define FSMC_BTR4_ADDHLD_0 ((uint32_t)0x00000010) /*!<Bit 0 */
+#define FSMC_BTR4_ADDHLD_1 ((uint32_t)0x00000020) /*!<Bit 1 */
+#define FSMC_BTR4_ADDHLD_2 ((uint32_t)0x00000040) /*!<Bit 2 */
+#define FSMC_BTR4_ADDHLD_3 ((uint32_t)0x00000080) /*!<Bit 3 */
+
+#define FSMC_BTR4_DATAST ((uint32_t)0x0000FF00) /*!<DATAST [3:0] bits (Data-phase duration) */
+#define FSMC_BTR4_DATAST_0 ((uint32_t)0x00000100) /*!<Bit 0 */
+#define FSMC_BTR4_DATAST_1 ((uint32_t)0x00000200) /*!<Bit 1 */
+#define FSMC_BTR4_DATAST_2 ((uint32_t)0x00000400) /*!<Bit 2 */
+#define FSMC_BTR4_DATAST_3 ((uint32_t)0x00000800) /*!<Bit 3 */
+
+#define FSMC_BTR4_BUSTURN ((uint32_t)0x000F0000) /*!<BUSTURN[3:0] bits (Bus turnaround phase duration) */
+#define FSMC_BTR4_BUSTURN_0 ((uint32_t)0x00010000) /*!<Bit 0 */
+#define FSMC_BTR4_BUSTURN_1 ((uint32_t)0x00020000) /*!<Bit 1 */
+#define FSMC_BTR4_BUSTURN_2 ((uint32_t)0x00040000) /*!<Bit 2 */
+#define FSMC_BTR4_BUSTURN_3 ((uint32_t)0x00080000) /*!<Bit 3 */
+
+#define FSMC_BTR4_CLKDIV ((uint32_t)0x00F00000) /*!<CLKDIV[3:0] bits (Clock divide ratio) */
+#define FSMC_BTR4_CLKDIV_0 ((uint32_t)0x00100000) /*!<Bit 0 */
+#define FSMC_BTR4_CLKDIV_1 ((uint32_t)0x00200000) /*!<Bit 1 */
+#define FSMC_BTR4_CLKDIV_2 ((uint32_t)0x00400000) /*!<Bit 2 */
+#define FSMC_BTR4_CLKDIV_3 ((uint32_t)0x00800000) /*!<Bit 3 */
+
+#define FSMC_BTR4_DATLAT ((uint32_t)0x0F000000) /*!<DATLA[3:0] bits (Data latency) */
+#define FSMC_BTR4_DATLAT_0 ((uint32_t)0x01000000) /*!<Bit 0 */
+#define FSMC_BTR4_DATLAT_1 ((uint32_t)0x02000000) /*!<Bit 1 */
+#define FSMC_BTR4_DATLAT_2 ((uint32_t)0x04000000) /*!<Bit 2 */
+#define FSMC_BTR4_DATLAT_3 ((uint32_t)0x08000000) /*!<Bit 3 */
+
+#define FSMC_BTR4_ACCMOD ((uint32_t)0x30000000) /*!<ACCMOD[1:0] bits (Access mode) */
+#define FSMC_BTR4_ACCMOD_0 ((uint32_t)0x10000000) /*!<Bit 0 */
+#define FSMC_BTR4_ACCMOD_1 ((uint32_t)0x20000000) /*!<Bit 1 */
+
+/****************** Bit definition for FSMC_BWTR1 register ******************/
+#define FSMC_BWTR1_ADDSET ((uint32_t)0x0000000F) /*!<ADDSET[3:0] bits (Address setup phase duration) */
+#define FSMC_BWTR1_ADDSET_0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define FSMC_BWTR1_ADDSET_1 ((uint32_t)0x00000002) /*!<Bit 1 */
+#define FSMC_BWTR1_ADDSET_2 ((uint32_t)0x00000004) /*!<Bit 2 */
+#define FSMC_BWTR1_ADDSET_3 ((uint32_t)0x00000008) /*!<Bit 3 */
+
+#define FSMC_BWTR1_ADDHLD ((uint32_t)0x000000F0) /*!<ADDHLD[3:0] bits (Address-hold phase duration) */
+#define FSMC_BWTR1_ADDHLD_0 ((uint32_t)0x00000010) /*!<Bit 0 */
+#define FSMC_BWTR1_ADDHLD_1 ((uint32_t)0x00000020) /*!<Bit 1 */
+#define FSMC_BWTR1_ADDHLD_2 ((uint32_t)0x00000040) /*!<Bit 2 */
+#define FSMC_BWTR1_ADDHLD_3 ((uint32_t)0x00000080) /*!<Bit 3 */
+
+#define FSMC_BWTR1_DATAST ((uint32_t)0x0000FF00) /*!<DATAST [3:0] bits (Data-phase duration) */
+#define FSMC_BWTR1_DATAST_0 ((uint32_t)0x00000100) /*!<Bit 0 */
+#define FSMC_BWTR1_DATAST_1 ((uint32_t)0x00000200) /*!<Bit 1 */
+#define FSMC_BWTR1_DATAST_2 ((uint32_t)0x00000400) /*!<Bit 2 */
+#define FSMC_BWTR1_DATAST_3 ((uint32_t)0x00000800) /*!<Bit 3 */
+
+#define FSMC_BWTR1_CLKDIV ((uint32_t)0x00F00000) /*!<CLKDIV[3:0] bits (Clock divide ratio) */
+#define FSMC_BWTR1_CLKDIV_0 ((uint32_t)0x00100000) /*!<Bit 0 */
+#define FSMC_BWTR1_CLKDIV_1 ((uint32_t)0x00200000) /*!<Bit 1 */
+#define FSMC_BWTR1_CLKDIV_2 ((uint32_t)0x00400000) /*!<Bit 2 */
+#define FSMC_BWTR1_CLKDIV_3 ((uint32_t)0x00800000) /*!<Bit 3 */
+
+#define FSMC_BWTR1_DATLAT ((uint32_t)0x0F000000) /*!<DATLA[3:0] bits (Data latency) */
+#define FSMC_BWTR1_DATLAT_0 ((uint32_t)0x01000000) /*!<Bit 0 */
+#define FSMC_BWTR1_DATLAT_1 ((uint32_t)0x02000000) /*!<Bit 1 */
+#define FSMC_BWTR1_DATLAT_2 ((uint32_t)0x04000000) /*!<Bit 2 */
+#define FSMC_BWTR1_DATLAT_3 ((uint32_t)0x08000000) /*!<Bit 3 */
+
+#define FSMC_BWTR1_ACCMOD ((uint32_t)0x30000000) /*!<ACCMOD[1:0] bits (Access mode) */
+#define FSMC_BWTR1_ACCMOD_0 ((uint32_t)0x10000000) /*!<Bit 0 */
+#define FSMC_BWTR1_ACCMOD_1 ((uint32_t)0x20000000) /*!<Bit 1 */
+
+/****************** Bit definition for FSMC_BWTR2 register ******************/
+#define FSMC_BWTR2_ADDSET ((uint32_t)0x0000000F) /*!<ADDSET[3:0] bits (Address setup phase duration) */
+#define FSMC_BWTR2_ADDSET_0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define FSMC_BWTR2_ADDSET_1 ((uint32_t)0x00000002) /*!<Bit 1 */
+#define FSMC_BWTR2_ADDSET_2 ((uint32_t)0x00000004) /*!<Bit 2 */
+#define FSMC_BWTR2_ADDSET_3 ((uint32_t)0x00000008) /*!<Bit 3 */
+
+#define FSMC_BWTR2_ADDHLD ((uint32_t)0x000000F0) /*!<ADDHLD[3:0] bits (Address-hold phase duration) */
+#define FSMC_BWTR2_ADDHLD_0 ((uint32_t)0x00000010) /*!<Bit 0 */
+#define FSMC_BWTR2_ADDHLD_1 ((uint32_t)0x00000020) /*!<Bit 1 */
+#define FSMC_BWTR2_ADDHLD_2 ((uint32_t)0x00000040) /*!<Bit 2 */
+#define FSMC_BWTR2_ADDHLD_3 ((uint32_t)0x00000080) /*!<Bit 3 */
+
+#define FSMC_BWTR2_DATAST ((uint32_t)0x0000FF00) /*!<DATAST [3:0] bits (Data-phase duration) */
+#define FSMC_BWTR2_DATAST_0 ((uint32_t)0x00000100) /*!<Bit 0 */
+#define FSMC_BWTR2_DATAST_1 ((uint32_t)0x00000200) /*!<Bit 1 */
+#define FSMC_BWTR2_DATAST_2 ((uint32_t)0x00000400) /*!<Bit 2 */
+#define FSMC_BWTR2_DATAST_3 ((uint32_t)0x00000800) /*!<Bit 3 */
+
+#define FSMC_BWTR2_CLKDIV ((uint32_t)0x00F00000) /*!<CLKDIV[3:0] bits (Clock divide ratio) */
+#define FSMC_BWTR2_CLKDIV_0 ((uint32_t)0x00100000) /*!<Bit 0 */
+#define FSMC_BWTR2_CLKDIV_1 ((uint32_t)0x00200000) /*!<Bit 1*/
+#define FSMC_BWTR2_CLKDIV_2 ((uint32_t)0x00400000) /*!<Bit 2 */
+#define FSMC_BWTR2_CLKDIV_3 ((uint32_t)0x00800000) /*!<Bit 3 */
+
+#define FSMC_BWTR2_DATLAT ((uint32_t)0x0F000000) /*!<DATLA[3:0] bits (Data latency) */
+#define FSMC_BWTR2_DATLAT_0 ((uint32_t)0x01000000) /*!<Bit 0 */
+#define FSMC_BWTR2_DATLAT_1 ((uint32_t)0x02000000) /*!<Bit 1 */
+#define FSMC_BWTR2_DATLAT_2 ((uint32_t)0x04000000) /*!<Bit 2 */
+#define FSMC_BWTR2_DATLAT_3 ((uint32_t)0x08000000) /*!<Bit 3 */
+
+#define FSMC_BWTR2_ACCMOD ((uint32_t)0x30000000) /*!<ACCMOD[1:0] bits (Access mode) */
+#define FSMC_BWTR2_ACCMOD_0 ((uint32_t)0x10000000) /*!<Bit 0 */
+#define FSMC_BWTR2_ACCMOD_1 ((uint32_t)0x20000000) /*!<Bit 1 */
+
+/****************** Bit definition for FSMC_BWTR3 register ******************/
+#define FSMC_BWTR3_ADDSET ((uint32_t)0x0000000F) /*!<ADDSET[3:0] bits (Address setup phase duration) */
+#define FSMC_BWTR3_ADDSET_0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define FSMC_BWTR3_ADDSET_1 ((uint32_t)0x00000002) /*!<Bit 1 */
+#define FSMC_BWTR3_ADDSET_2 ((uint32_t)0x00000004) /*!<Bit 2 */
+#define FSMC_BWTR3_ADDSET_3 ((uint32_t)0x00000008) /*!<Bit 3 */
+
+#define FSMC_BWTR3_ADDHLD ((uint32_t)0x000000F0) /*!<ADDHLD[3:0] bits (Address-hold phase duration) */
+#define FSMC_BWTR3_ADDHLD_0 ((uint32_t)0x00000010) /*!<Bit 0 */
+#define FSMC_BWTR3_ADDHLD_1 ((uint32_t)0x00000020) /*!<Bit 1 */
+#define FSMC_BWTR3_ADDHLD_2 ((uint32_t)0x00000040) /*!<Bit 2 */
+#define FSMC_BWTR3_ADDHLD_3 ((uint32_t)0x00000080) /*!<Bit 3 */
+
+#define FSMC_BWTR3_DATAST ((uint32_t)0x0000FF00) /*!<DATAST [3:0] bits (Data-phase duration) */
+#define FSMC_BWTR3_DATAST_0 ((uint32_t)0x00000100) /*!<Bit 0 */
+#define FSMC_BWTR3_DATAST_1 ((uint32_t)0x00000200) /*!<Bit 1 */
+#define FSMC_BWTR3_DATAST_2 ((uint32_t)0x00000400) /*!<Bit 2 */
+#define FSMC_BWTR3_DATAST_3 ((uint32_t)0x00000800) /*!<Bit 3 */
+
+#define FSMC_BWTR3_CLKDIV ((uint32_t)0x00F00000) /*!<CLKDIV[3:0] bits (Clock divide ratio) */
+#define FSMC_BWTR3_CLKDIV_0 ((uint32_t)0x00100000) /*!<Bit 0 */
+#define FSMC_BWTR3_CLKDIV_1 ((uint32_t)0x00200000) /*!<Bit 1 */
+#define FSMC_BWTR3_CLKDIV_2 ((uint32_t)0x00400000) /*!<Bit 2 */
+#define FSMC_BWTR3_CLKDIV_3 ((uint32_t)0x00800000) /*!<Bit 3 */
+
+#define FSMC_BWTR3_DATLAT ((uint32_t)0x0F000000) /*!<DATLA[3:0] bits (Data latency) */
+#define FSMC_BWTR3_DATLAT_0 ((uint32_t)0x01000000) /*!<Bit 0 */
+#define FSMC_BWTR3_DATLAT_1 ((uint32_t)0x02000000) /*!<Bit 1 */
+#define FSMC_BWTR3_DATLAT_2 ((uint32_t)0x04000000) /*!<Bit 2 */
+#define FSMC_BWTR3_DATLAT_3 ((uint32_t)0x08000000) /*!<Bit 3 */
+
+#define FSMC_BWTR3_ACCMOD ((uint32_t)0x30000000) /*!<ACCMOD[1:0] bits (Access mode) */
+#define FSMC_BWTR3_ACCMOD_0 ((uint32_t)0x10000000) /*!<Bit 0 */
+#define FSMC_BWTR3_ACCMOD_1 ((uint32_t)0x20000000) /*!<Bit 1 */
+
+/****************** Bit definition for FSMC_BWTR4 register ******************/
+#define FSMC_BWTR4_ADDSET ((uint32_t)0x0000000F) /*!<ADDSET[3:0] bits (Address setup phase duration) */
+#define FSMC_BWTR4_ADDSET_0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define FSMC_BWTR4_ADDSET_1 ((uint32_t)0x00000002) /*!<Bit 1 */
+#define FSMC_BWTR4_ADDSET_2 ((uint32_t)0x00000004) /*!<Bit 2 */
+#define FSMC_BWTR4_ADDSET_3 ((uint32_t)0x00000008) /*!<Bit 3 */
+
+#define FSMC_BWTR4_ADDHLD ((uint32_t)0x000000F0) /*!<ADDHLD[3:0] bits (Address-hold phase duration) */
+#define FSMC_BWTR4_ADDHLD_0 ((uint32_t)0x00000010) /*!<Bit 0 */
+#define FSMC_BWTR4_ADDHLD_1 ((uint32_t)0x00000020) /*!<Bit 1 */
+#define FSMC_BWTR4_ADDHLD_2 ((uint32_t)0x00000040) /*!<Bit 2 */
+#define FSMC_BWTR4_ADDHLD_3 ((uint32_t)0x00000080) /*!<Bit 3 */
+
+#define FSMC_BWTR4_DATAST ((uint32_t)0x0000FF00) /*!<DATAST [3:0] bits (Data-phase duration) */
+#define FSMC_BWTR4_DATAST_0 ((uint32_t)0x00000100) /*!<Bit 0 */
+#define FSMC_BWTR4_DATAST_1 ((uint32_t)0x00000200) /*!<Bit 1 */
+#define FSMC_BWTR4_DATAST_2 ((uint32_t)0x00000400) /*!<Bit 2 */
+#define FSMC_BWTR4_DATAST_3 ((uint32_t)0x00000800) /*!<Bit 3 */
+
+#define FSMC_BWTR4_CLKDIV ((uint32_t)0x00F00000) /*!<CLKDIV[3:0] bits (Clock divide ratio) */
+#define FSMC_BWTR4_CLKDIV_0 ((uint32_t)0x00100000) /*!<Bit 0 */
+#define FSMC_BWTR4_CLKDIV_1 ((uint32_t)0x00200000) /*!<Bit 1 */
+#define FSMC_BWTR4_CLKDIV_2 ((uint32_t)0x00400000) /*!<Bit 2 */
+#define FSMC_BWTR4_CLKDIV_3 ((uint32_t)0x00800000) /*!<Bit 3 */
+
+#define FSMC_BWTR4_DATLAT ((uint32_t)0x0F000000) /*!<DATLA[3:0] bits (Data latency) */
+#define FSMC_BWTR4_DATLAT_0 ((uint32_t)0x01000000) /*!<Bit 0 */
+#define FSMC_BWTR4_DATLAT_1 ((uint32_t)0x02000000) /*!<Bit 1 */
+#define FSMC_BWTR4_DATLAT_2 ((uint32_t)0x04000000) /*!<Bit 2 */
+#define FSMC_BWTR4_DATLAT_3 ((uint32_t)0x08000000) /*!<Bit 3 */
+
+#define FSMC_BWTR4_ACCMOD ((uint32_t)0x30000000) /*!<ACCMOD[1:0] bits (Access mode) */
+#define FSMC_BWTR4_ACCMOD_0 ((uint32_t)0x10000000) /*!<Bit 0 */
+#define FSMC_BWTR4_ACCMOD_1 ((uint32_t)0x20000000) /*!<Bit 1 */
+
+/****************** Bit definition for FSMC_PCR2 register *******************/
+#define FSMC_PCR2_PWAITEN ((uint32_t)0x00000002) /*!<Wait feature enable bit */
+#define FSMC_PCR2_PBKEN ((uint32_t)0x00000004) /*!<PC Card/NAND Flash memory bank enable bit */
+#define FSMC_PCR2_PTYP ((uint32_t)0x00000008) /*!<Memory type */
+
+#define FSMC_PCR2_PWID ((uint32_t)0x00000030) /*!<PWID[1:0] bits (NAND Flash databus width) */
+#define FSMC_PCR2_PWID_0 ((uint32_t)0x00000010) /*!<Bit 0 */
+#define FSMC_PCR2_PWID_1 ((uint32_t)0x00000020) /*!<Bit 1 */
+
+#define FSMC_PCR2_ECCEN ((uint32_t)0x00000040) /*!<ECC computation logic enable bit */
+
+#define FSMC_PCR2_TCLR ((uint32_t)0x00001E00) /*!<TCLR[3:0] bits (CLE to RE delay) */
+#define FSMC_PCR2_TCLR_0 ((uint32_t)0x00000200) /*!<Bit 0 */
+#define FSMC_PCR2_TCLR_1 ((uint32_t)0x00000400) /*!<Bit 1 */
+#define FSMC_PCR2_TCLR_2 ((uint32_t)0x00000800) /*!<Bit 2 */
+#define FSMC_PCR2_TCLR_3 ((uint32_t)0x00001000) /*!<Bit 3 */
+
+#define FSMC_PCR2_TAR ((uint32_t)0x0001E000) /*!<TAR[3:0] bits (ALE to RE delay) */
+#define FSMC_PCR2_TAR_0 ((uint32_t)0x00002000) /*!<Bit 0 */
+#define FSMC_PCR2_TAR_1 ((uint32_t)0x00004000) /*!<Bit 1 */
+#define FSMC_PCR2_TAR_2 ((uint32_t)0x00008000) /*!<Bit 2 */
+#define FSMC_PCR2_TAR_3 ((uint32_t)0x00010000) /*!<Bit 3 */
+
+#define FSMC_PCR2_ECCPS ((uint32_t)0x000E0000) /*!<ECCPS[1:0] bits (ECC page size) */
+#define FSMC_PCR2_ECCPS_0 ((uint32_t)0x00020000) /*!<Bit 0 */
+#define FSMC_PCR2_ECCPS_1 ((uint32_t)0x00040000) /*!<Bit 1 */
+#define FSMC_PCR2_ECCPS_2 ((uint32_t)0x00080000) /*!<Bit 2 */
+
+/****************** Bit definition for FSMC_PCR3 register *******************/
+#define FSMC_PCR3_PWAITEN ((uint32_t)0x00000002) /*!<Wait feature enable bit */
+#define FSMC_PCR3_PBKEN ((uint32_t)0x00000004) /*!<PC Card/NAND Flash memory bank enable bit */
+#define FSMC_PCR3_PTYP ((uint32_t)0x00000008) /*!<Memory type */
+
+#define FSMC_PCR3_PWID ((uint32_t)0x00000030) /*!<PWID[1:0] bits (NAND Flash databus width) */
+#define FSMC_PCR3_PWID_0 ((uint32_t)0x00000010) /*!<Bit 0 */
+#define FSMC_PCR3_PWID_1 ((uint32_t)0x00000020) /*!<Bit 1 */
+
+#define FSMC_PCR3_ECCEN ((uint32_t)0x00000040) /*!<ECC computation logic enable bit */
+
+#define FSMC_PCR3_TCLR ((uint32_t)0x00001E00) /*!<TCLR[3:0] bits (CLE to RE delay) */
+#define FSMC_PCR3_TCLR_0 ((uint32_t)0x00000200) /*!<Bit 0 */
+#define FSMC_PCR3_TCLR_1 ((uint32_t)0x00000400) /*!<Bit 1 */
+#define FSMC_PCR3_TCLR_2 ((uint32_t)0x00000800) /*!<Bit 2 */
+#define FSMC_PCR3_TCLR_3 ((uint32_t)0x00001000) /*!<Bit 3 */
+
+#define FSMC_PCR3_TAR ((uint32_t)0x0001E000) /*!<TAR[3:0] bits (ALE to RE delay) */
+#define FSMC_PCR3_TAR_0 ((uint32_t)0x00002000) /*!<Bit 0 */
+#define FSMC_PCR3_TAR_1 ((uint32_t)0x00004000) /*!<Bit 1 */
+#define FSMC_PCR3_TAR_2 ((uint32_t)0x00008000) /*!<Bit 2 */
+#define FSMC_PCR3_TAR_3 ((uint32_t)0x00010000) /*!<Bit 3 */
+
+#define FSMC_PCR3_ECCPS ((uint32_t)0x000E0000) /*!<ECCPS[2:0] bits (ECC page size) */
+#define FSMC_PCR3_ECCPS_0 ((uint32_t)0x00020000) /*!<Bit 0 */
+#define FSMC_PCR3_ECCPS_1 ((uint32_t)0x00040000) /*!<Bit 1 */
+#define FSMC_PCR3_ECCPS_2 ((uint32_t)0x00080000) /*!<Bit 2 */
+
+/****************** Bit definition for FSMC_PCR4 register *******************/
+#define FSMC_PCR4_PWAITEN ((uint32_t)0x00000002) /*!<Wait feature enable bit */
+#define FSMC_PCR4_PBKEN ((uint32_t)0x00000004) /*!<PC Card/NAND Flash memory bank enable bit */
+#define FSMC_PCR4_PTYP ((uint32_t)0x00000008) /*!<Memory type */
+
+#define FSMC_PCR4_PWID ((uint32_t)0x00000030) /*!<PWID[1:0] bits (NAND Flash databus width) */
+#define FSMC_PCR4_PWID_0 ((uint32_t)0x00000010) /*!<Bit 0 */
+#define FSMC_PCR4_PWID_1 ((uint32_t)0x00000020) /*!<Bit 1 */
+
+#define FSMC_PCR4_ECCEN ((uint32_t)0x00000040) /*!<ECC computation logic enable bit */
+
+#define FSMC_PCR4_TCLR ((uint32_t)0x00001E00) /*!<TCLR[3:0] bits (CLE to RE delay) */
+#define FSMC_PCR4_TCLR_0 ((uint32_t)0x00000200) /*!<Bit 0 */
+#define FSMC_PCR4_TCLR_1 ((uint32_t)0x00000400) /*!<Bit 1 */
+#define FSMC_PCR4_TCLR_2 ((uint32_t)0x00000800) /*!<Bit 2 */
+#define FSMC_PCR4_TCLR_3 ((uint32_t)0x00001000) /*!<Bit 3 */
+
+#define FSMC_PCR4_TAR ((uint32_t)0x0001E000) /*!<TAR[3:0] bits (ALE to RE delay) */
+#define FSMC_PCR4_TAR_0 ((uint32_t)0x00002000) /*!<Bit 0 */
+#define FSMC_PCR4_TAR_1 ((uint32_t)0x00004000) /*!<Bit 1 */
+#define FSMC_PCR4_TAR_2 ((uint32_t)0x00008000) /*!<Bit 2 */
+#define FSMC_PCR4_TAR_3 ((uint32_t)0x00010000) /*!<Bit 3 */
+
+#define FSMC_PCR4_ECCPS ((uint32_t)0x000E0000) /*!<ECCPS[2:0] bits (ECC page size) */
+#define FSMC_PCR4_ECCPS_0 ((uint32_t)0x00020000) /*!<Bit 0 */
+#define FSMC_PCR4_ECCPS_1 ((uint32_t)0x00040000) /*!<Bit 1 */
+#define FSMC_PCR4_ECCPS_2 ((uint32_t)0x00080000) /*!<Bit 2 */
+
+/******************* Bit definition for FSMC_SR2 register *******************/
+#define FSMC_SR2_IRS ((uint8_t)0x01) /*!<Interrupt Rising Edge status */
+#define FSMC_SR2_ILS ((uint8_t)0x02) /*!<Interrupt Level status */
+#define FSMC_SR2_IFS ((uint8_t)0x04) /*!<Interrupt Falling Edge status */
+#define FSMC_SR2_IREN ((uint8_t)0x08) /*!<Interrupt Rising Edge detection Enable bit */
+#define FSMC_SR2_ILEN ((uint8_t)0x10) /*!<Interrupt Level detection Enable bit */
+#define FSMC_SR2_IFEN ((uint8_t)0x20) /*!<Interrupt Falling Edge detection Enable bit */
+#define FSMC_SR2_FEMPT ((uint8_t)0x40) /*!<FIFO empty */
+
+/******************* Bit definition for FSMC_SR3 register *******************/
+#define FSMC_SR3_IRS ((uint8_t)0x01) /*!<Interrupt Rising Edge status */
+#define FSMC_SR3_ILS ((uint8_t)0x02) /*!<Interrupt Level status */
+#define FSMC_SR3_IFS ((uint8_t)0x04) /*!<Interrupt Falling Edge status */
+#define FSMC_SR3_IREN ((uint8_t)0x08) /*!<Interrupt Rising Edge detection Enable bit */
+#define FSMC_SR3_ILEN ((uint8_t)0x10) /*!<Interrupt Level detection Enable bit */
+#define FSMC_SR3_IFEN ((uint8_t)0x20) /*!<Interrupt Falling Edge detection Enable bit */
+#define FSMC_SR3_FEMPT ((uint8_t)0x40) /*!<FIFO empty */
+
+/******************* Bit definition for FSMC_SR4 register *******************/
+#define FSMC_SR4_IRS ((uint8_t)0x01) /*!<Interrupt Rising Edge status */
+#define FSMC_SR4_ILS ((uint8_t)0x02) /*!<Interrupt Level status */
+#define FSMC_SR4_IFS ((uint8_t)0x04) /*!<Interrupt Falling Edge status */
+#define FSMC_SR4_IREN ((uint8_t)0x08) /*!<Interrupt Rising Edge detection Enable bit */
+#define FSMC_SR4_ILEN ((uint8_t)0x10) /*!<Interrupt Level detection Enable bit */
+#define FSMC_SR4_IFEN ((uint8_t)0x20) /*!<Interrupt Falling Edge detection Enable bit */
+#define FSMC_SR4_FEMPT ((uint8_t)0x40) /*!<FIFO empty */
+
+/****************** Bit definition for FSMC_PMEM2 register ******************/
+#define FSMC_PMEM2_MEMSET2 ((uint32_t)0x000000FF) /*!<MEMSET2[7:0] bits (Common memory 2 setup time) */
+#define FSMC_PMEM2_MEMSET2_0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define FSMC_PMEM2_MEMSET2_1 ((uint32_t)0x00000002) /*!<Bit 1 */
+#define FSMC_PMEM2_MEMSET2_2 ((uint32_t)0x00000004) /*!<Bit 2 */
+#define FSMC_PMEM2_MEMSET2_3 ((uint32_t)0x00000008) /*!<Bit 3 */
+#define FSMC_PMEM2_MEMSET2_4 ((uint32_t)0x00000010) /*!<Bit 4 */
+#define FSMC_PMEM2_MEMSET2_5 ((uint32_t)0x00000020) /*!<Bit 5 */
+#define FSMC_PMEM2_MEMSET2_6 ((uint32_t)0x00000040) /*!<Bit 6 */
+#define FSMC_PMEM2_MEMSET2_7 ((uint32_t)0x00000080) /*!<Bit 7 */
+
+#define FSMC_PMEM2_MEMWAIT2 ((uint32_t)0x0000FF00) /*!<MEMWAIT2[7:0] bits (Common memory 2 wait time) */
+#define FSMC_PMEM2_MEMWAIT2_0 ((uint32_t)0x00000100) /*!<Bit 0 */
+#define FSMC_PMEM2_MEMWAIT2_1 ((uint32_t)0x00000200) /*!<Bit 1 */
+#define FSMC_PMEM2_MEMWAIT2_2 ((uint32_t)0x00000400) /*!<Bit 2 */
+#define FSMC_PMEM2_MEMWAIT2_3 ((uint32_t)0x00000800) /*!<Bit 3 */
+#define FSMC_PMEM2_MEMWAIT2_4 ((uint32_t)0x00001000) /*!<Bit 4 */
+#define FSMC_PMEM2_MEMWAIT2_5 ((uint32_t)0x00002000) /*!<Bit 5 */
+#define FSMC_PMEM2_MEMWAIT2_6 ((uint32_t)0x00004000) /*!<Bit 6 */
+#define FSMC_PMEM2_MEMWAIT2_7 ((uint32_t)0x00008000) /*!<Bit 7 */
+
+#define FSMC_PMEM2_MEMHOLD2 ((uint32_t)0x00FF0000) /*!<MEMHOLD2[7:0] bits (Common memory 2 hold time) */
+#define FSMC_PMEM2_MEMHOLD2_0 ((uint32_t)0x00010000) /*!<Bit 0 */
+#define FSMC_PMEM2_MEMHOLD2_1 ((uint32_t)0x00020000) /*!<Bit 1 */
+#define FSMC_PMEM2_MEMHOLD2_2 ((uint32_t)0x00040000) /*!<Bit 2 */
+#define FSMC_PMEM2_MEMHOLD2_3 ((uint32_t)0x00080000) /*!<Bit 3 */
+#define FSMC_PMEM2_MEMHOLD2_4 ((uint32_t)0x00100000) /*!<Bit 4 */
+#define FSMC_PMEM2_MEMHOLD2_5 ((uint32_t)0x00200000) /*!<Bit 5 */
+#define FSMC_PMEM2_MEMHOLD2_6 ((uint32_t)0x00400000) /*!<Bit 6 */
+#define FSMC_PMEM2_MEMHOLD2_7 ((uint32_t)0x00800000) /*!<Bit 7 */
+
+#define FSMC_PMEM2_MEMHIZ2 ((uint32_t)0xFF000000) /*!<MEMHIZ2[7:0] bits (Common memory 2 databus HiZ time) */
+#define FSMC_PMEM2_MEMHIZ2_0 ((uint32_t)0x01000000) /*!<Bit 0 */
+#define FSMC_PMEM2_MEMHIZ2_1 ((uint32_t)0x02000000) /*!<Bit 1 */
+#define FSMC_PMEM2_MEMHIZ2_2 ((uint32_t)0x04000000) /*!<Bit 2 */
+#define FSMC_PMEM2_MEMHIZ2_3 ((uint32_t)0x08000000) /*!<Bit 3 */
+#define FSMC_PMEM2_MEMHIZ2_4 ((uint32_t)0x10000000) /*!<Bit 4 */
+#define FSMC_PMEM2_MEMHIZ2_5 ((uint32_t)0x20000000) /*!<Bit 5 */
+#define FSMC_PMEM2_MEMHIZ2_6 ((uint32_t)0x40000000) /*!<Bit 6 */
+#define FSMC_PMEM2_MEMHIZ2_7 ((uint32_t)0x80000000) /*!<Bit 7 */
+
+/****************** Bit definition for FSMC_PMEM3 register ******************/
+#define FSMC_PMEM3_MEMSET3 ((uint32_t)0x000000FF) /*!<MEMSET3[7:0] bits (Common memory 3 setup time) */
+#define FSMC_PMEM3_MEMSET3_0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define FSMC_PMEM3_MEMSET3_1 ((uint32_t)0x00000002) /*!<Bit 1 */
+#define FSMC_PMEM3_MEMSET3_2 ((uint32_t)0x00000004) /*!<Bit 2 */
+#define FSMC_PMEM3_MEMSET3_3 ((uint32_t)0x00000008) /*!<Bit 3 */
+#define FSMC_PMEM3_MEMSET3_4 ((uint32_t)0x00000010) /*!<Bit 4 */
+#define FSMC_PMEM3_MEMSET3_5 ((uint32_t)0x00000020) /*!<Bit 5 */
+#define FSMC_PMEM3_MEMSET3_6 ((uint32_t)0x00000040) /*!<Bit 6 */
+#define FSMC_PMEM3_MEMSET3_7 ((uint32_t)0x00000080) /*!<Bit 7 */
+
+#define FSMC_PMEM3_MEMWAIT3 ((uint32_t)0x0000FF00) /*!<MEMWAIT3[7:0] bits (Common memory 3 wait time) */
+#define FSMC_PMEM3_MEMWAIT3_0 ((uint32_t)0x00000100) /*!<Bit 0 */
+#define FSMC_PMEM3_MEMWAIT3_1 ((uint32_t)0x00000200) /*!<Bit 1 */
+#define FSMC_PMEM3_MEMWAIT3_2 ((uint32_t)0x00000400) /*!<Bit 2 */
+#define FSMC_PMEM3_MEMWAIT3_3 ((uint32_t)0x00000800) /*!<Bit 3 */
+#define FSMC_PMEM3_MEMWAIT3_4 ((uint32_t)0x00001000) /*!<Bit 4 */
+#define FSMC_PMEM3_MEMWAIT3_5 ((uint32_t)0x00002000) /*!<Bit 5 */
+#define FSMC_PMEM3_MEMWAIT3_6 ((uint32_t)0x00004000) /*!<Bit 6 */
+#define FSMC_PMEM3_MEMWAIT3_7 ((uint32_t)0x00008000) /*!<Bit 7 */
+
+#define FSMC_PMEM3_MEMHOLD3 ((uint32_t)0x00FF0000) /*!<MEMHOLD3[7:0] bits (Common memory 3 hold time) */
+#define FSMC_PMEM3_MEMHOLD3_0 ((uint32_t)0x00010000) /*!<Bit 0 */
+#define FSMC_PMEM3_MEMHOLD3_1 ((uint32_t)0x00020000) /*!<Bit 1 */
+#define FSMC_PMEM3_MEMHOLD3_2 ((uint32_t)0x00040000) /*!<Bit 2 */
+#define FSMC_PMEM3_MEMHOLD3_3 ((uint32_t)0x00080000) /*!<Bit 3 */
+#define FSMC_PMEM3_MEMHOLD3_4 ((uint32_t)0x00100000) /*!<Bit 4 */
+#define FSMC_PMEM3_MEMHOLD3_5 ((uint32_t)0x00200000) /*!<Bit 5 */
+#define FSMC_PMEM3_MEMHOLD3_6 ((uint32_t)0x00400000) /*!<Bit 6 */
+#define FSMC_PMEM3_MEMHOLD3_7 ((uint32_t)0x00800000) /*!<Bit 7 */
+
+#define FSMC_PMEM3_MEMHIZ3 ((uint32_t)0xFF000000) /*!<MEMHIZ3[7:0] bits (Common memory 3 databus HiZ time) */
+#define FSMC_PMEM3_MEMHIZ3_0 ((uint32_t)0x01000000) /*!<Bit 0 */
+#define FSMC_PMEM3_MEMHIZ3_1 ((uint32_t)0x02000000) /*!<Bit 1 */
+#define FSMC_PMEM3_MEMHIZ3_2 ((uint32_t)0x04000000) /*!<Bit 2 */
+#define FSMC_PMEM3_MEMHIZ3_3 ((uint32_t)0x08000000) /*!<Bit 3 */
+#define FSMC_PMEM3_MEMHIZ3_4 ((uint32_t)0x10000000) /*!<Bit 4 */
+#define FSMC_PMEM3_MEMHIZ3_5 ((uint32_t)0x20000000) /*!<Bit 5 */
+#define FSMC_PMEM3_MEMHIZ3_6 ((uint32_t)0x40000000) /*!<Bit 6 */
+#define FSMC_PMEM3_MEMHIZ3_7 ((uint32_t)0x80000000) /*!<Bit 7 */
+
+/****************** Bit definition for FSMC_PMEM4 register ******************/
+#define FSMC_PMEM4_MEMSET4 ((uint32_t)0x000000FF) /*!<MEMSET4[7:0] bits (Common memory 4 setup time) */
+#define FSMC_PMEM4_MEMSET4_0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define FSMC_PMEM4_MEMSET4_1 ((uint32_t)0x00000002) /*!<Bit 1 */
+#define FSMC_PMEM4_MEMSET4_2 ((uint32_t)0x00000004) /*!<Bit 2 */
+#define FSMC_PMEM4_MEMSET4_3 ((uint32_t)0x00000008) /*!<Bit 3 */
+#define FSMC_PMEM4_MEMSET4_4 ((uint32_t)0x00000010) /*!<Bit 4 */
+#define FSMC_PMEM4_MEMSET4_5 ((uint32_t)0x00000020) /*!<Bit 5 */
+#define FSMC_PMEM4_MEMSET4_6 ((uint32_t)0x00000040) /*!<Bit 6 */
+#define FSMC_PMEM4_MEMSET4_7 ((uint32_t)0x00000080) /*!<Bit 7 */
+
+#define FSMC_PMEM4_MEMWAIT4 ((uint32_t)0x0000FF00) /*!<MEMWAIT4[7:0] bits (Common memory 4 wait time) */
+#define FSMC_PMEM4_MEMWAIT4_0 ((uint32_t)0x00000100) /*!<Bit 0 */
+#define FSMC_PMEM4_MEMWAIT4_1 ((uint32_t)0x00000200) /*!<Bit 1 */
+#define FSMC_PMEM4_MEMWAIT4_2 ((uint32_t)0x00000400) /*!<Bit 2 */
+#define FSMC_PMEM4_MEMWAIT4_3 ((uint32_t)0x00000800) /*!<Bit 3 */
+#define FSMC_PMEM4_MEMWAIT4_4 ((uint32_t)0x00001000) /*!<Bit 4 */
+#define FSMC_PMEM4_MEMWAIT4_5 ((uint32_t)0x00002000) /*!<Bit 5 */
+#define FSMC_PMEM4_MEMWAIT4_6 ((uint32_t)0x00004000) /*!<Bit 6 */
+#define FSMC_PMEM4_MEMWAIT4_7 ((uint32_t)0x00008000) /*!<Bit 7 */
+
+#define FSMC_PMEM4_MEMHOLD4 ((uint32_t)0x00FF0000) /*!<MEMHOLD4[7:0] bits (Common memory 4 hold time) */
+#define FSMC_PMEM4_MEMHOLD4_0 ((uint32_t)0x00010000) /*!<Bit 0 */
+#define FSMC_PMEM4_MEMHOLD4_1 ((uint32_t)0x00020000) /*!<Bit 1 */
+#define FSMC_PMEM4_MEMHOLD4_2 ((uint32_t)0x00040000) /*!<Bit 2 */
+#define FSMC_PMEM4_MEMHOLD4_3 ((uint32_t)0x00080000) /*!<Bit 3 */
+#define FSMC_PMEM4_MEMHOLD4_4 ((uint32_t)0x00100000) /*!<Bit 4 */
+#define FSMC_PMEM4_MEMHOLD4_5 ((uint32_t)0x00200000) /*!<Bit 5 */
+#define FSMC_PMEM4_MEMHOLD4_6 ((uint32_t)0x00400000) /*!<Bit 6 */
+#define FSMC_PMEM4_MEMHOLD4_7 ((uint32_t)0x00800000) /*!<Bit 7 */
+
+#define FSMC_PMEM4_MEMHIZ4 ((uint32_t)0xFF000000) /*!<MEMHIZ4[7:0] bits (Common memory 4 databus HiZ time) */
+#define FSMC_PMEM4_MEMHIZ4_0 ((uint32_t)0x01000000) /*!<Bit 0 */
+#define FSMC_PMEM4_MEMHIZ4_1 ((uint32_t)0x02000000) /*!<Bit 1 */
+#define FSMC_PMEM4_MEMHIZ4_2 ((uint32_t)0x04000000) /*!<Bit 2 */
+#define FSMC_PMEM4_MEMHIZ4_3 ((uint32_t)0x08000000) /*!<Bit 3 */
+#define FSMC_PMEM4_MEMHIZ4_4 ((uint32_t)0x10000000) /*!<Bit 4 */
+#define FSMC_PMEM4_MEMHIZ4_5 ((uint32_t)0x20000000) /*!<Bit 5 */
+#define FSMC_PMEM4_MEMHIZ4_6 ((uint32_t)0x40000000) /*!<Bit 6 */
+#define FSMC_PMEM4_MEMHIZ4_7 ((uint32_t)0x80000000) /*!<Bit 7 */
+
+/****************** Bit definition for FSMC_PATT2 register ******************/
+#define FSMC_PATT2_ATTSET2 ((uint32_t)0x000000FF) /*!<ATTSET2[7:0] bits (Attribute memory 2 setup time) */
+#define FSMC_PATT2_ATTSET2_0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define FSMC_PATT2_ATTSET2_1 ((uint32_t)0x00000002) /*!<Bit 1 */
+#define FSMC_PATT2_ATTSET2_2 ((uint32_t)0x00000004) /*!<Bit 2 */
+#define FSMC_PATT2_ATTSET2_3 ((uint32_t)0x00000008) /*!<Bit 3 */
+#define FSMC_PATT2_ATTSET2_4 ((uint32_t)0x00000010) /*!<Bit 4 */
+#define FSMC_PATT2_ATTSET2_5 ((uint32_t)0x00000020) /*!<Bit 5 */
+#define FSMC_PATT2_ATTSET2_6 ((uint32_t)0x00000040) /*!<Bit 6 */
+#define FSMC_PATT2_ATTSET2_7 ((uint32_t)0x00000080) /*!<Bit 7 */
+
+#define FSMC_PATT2_ATTWAIT2 ((uint32_t)0x0000FF00) /*!<ATTWAIT2[7:0] bits (Attribute memory 2 wait time) */
+#define FSMC_PATT2_ATTWAIT2_0 ((uint32_t)0x00000100) /*!<Bit 0 */
+#define FSMC_PATT2_ATTWAIT2_1 ((uint32_t)0x00000200) /*!<Bit 1 */
+#define FSMC_PATT2_ATTWAIT2_2 ((uint32_t)0x00000400) /*!<Bit 2 */
+#define FSMC_PATT2_ATTWAIT2_3 ((uint32_t)0x00000800) /*!<Bit 3 */
+#define FSMC_PATT2_ATTWAIT2_4 ((uint32_t)0x00001000) /*!<Bit 4 */
+#define FSMC_PATT2_ATTWAIT2_5 ((uint32_t)0x00002000) /*!<Bit 5 */
+#define FSMC_PATT2_ATTWAIT2_6 ((uint32_t)0x00004000) /*!<Bit 6 */
+#define FSMC_PATT2_ATTWAIT2_7 ((uint32_t)0x00008000) /*!<Bit 7 */
+
+#define FSMC_PATT2_ATTHOLD2 ((uint32_t)0x00FF0000) /*!<ATTHOLD2[7:0] bits (Attribute memory 2 hold time) */
+#define FSMC_PATT2_ATTHOLD2_0 ((uint32_t)0x00010000) /*!<Bit 0 */
+#define FSMC_PATT2_ATTHOLD2_1 ((uint32_t)0x00020000) /*!<Bit 1 */
+#define FSMC_PATT2_ATTHOLD2_2 ((uint32_t)0x00040000) /*!<Bit 2 */
+#define FSMC_PATT2_ATTHOLD2_3 ((uint32_t)0x00080000) /*!<Bit 3 */
+#define FSMC_PATT2_ATTHOLD2_4 ((uint32_t)0x00100000) /*!<Bit 4 */
+#define FSMC_PATT2_ATTHOLD2_5 ((uint32_t)0x00200000) /*!<Bit 5 */
+#define FSMC_PATT2_ATTHOLD2_6 ((uint32_t)0x00400000) /*!<Bit 6 */
+#define FSMC_PATT2_ATTHOLD2_7 ((uint32_t)0x00800000) /*!<Bit 7 */
+
+#define FSMC_PATT2_ATTHIZ2 ((uint32_t)0xFF000000) /*!<ATTHIZ2[7:0] bits (Attribute memory 2 databus HiZ time) */
+#define FSMC_PATT2_ATTHIZ2_0 ((uint32_t)0x01000000) /*!<Bit 0 */
+#define FSMC_PATT2_ATTHIZ2_1 ((uint32_t)0x02000000) /*!<Bit 1 */
+#define FSMC_PATT2_ATTHIZ2_2 ((uint32_t)0x04000000) /*!<Bit 2 */
+#define FSMC_PATT2_ATTHIZ2_3 ((uint32_t)0x08000000) /*!<Bit 3 */
+#define FSMC_PATT2_ATTHIZ2_4 ((uint32_t)0x10000000) /*!<Bit 4 */
+#define FSMC_PATT2_ATTHIZ2_5 ((uint32_t)0x20000000) /*!<Bit 5 */
+#define FSMC_PATT2_ATTHIZ2_6 ((uint32_t)0x40000000) /*!<Bit 6 */
+#define FSMC_PATT2_ATTHIZ2_7 ((uint32_t)0x80000000) /*!<Bit 7 */
+
+/****************** Bit definition for FSMC_PATT3 register ******************/
+#define FSMC_PATT3_ATTSET3 ((uint32_t)0x000000FF) /*!<ATTSET3[7:0] bits (Attribute memory 3 setup time) */
+#define FSMC_PATT3_ATTSET3_0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define FSMC_PATT3_ATTSET3_1 ((uint32_t)0x00000002) /*!<Bit 1 */
+#define FSMC_PATT3_ATTSET3_2 ((uint32_t)0x00000004) /*!<Bit 2 */
+#define FSMC_PATT3_ATTSET3_3 ((uint32_t)0x00000008) /*!<Bit 3 */
+#define FSMC_PATT3_ATTSET3_4 ((uint32_t)0x00000010) /*!<Bit 4 */
+#define FSMC_PATT3_ATTSET3_5 ((uint32_t)0x00000020) /*!<Bit 5 */
+#define FSMC_PATT3_ATTSET3_6 ((uint32_t)0x00000040) /*!<Bit 6 */
+#define FSMC_PATT3_ATTSET3_7 ((uint32_t)0x00000080) /*!<Bit 7 */
+
+#define FSMC_PATT3_ATTWAIT3 ((uint32_t)0x0000FF00) /*!<ATTWAIT3[7:0] bits (Attribute memory 3 wait time) */
+#define FSMC_PATT3_ATTWAIT3_0 ((uint32_t)0x00000100) /*!<Bit 0 */
+#define FSMC_PATT3_ATTWAIT3_1 ((uint32_t)0x00000200) /*!<Bit 1 */
+#define FSMC_PATT3_ATTWAIT3_2 ((uint32_t)0x00000400) /*!<Bit 2 */
+#define FSMC_PATT3_ATTWAIT3_3 ((uint32_t)0x00000800) /*!<Bit 3 */
+#define FSMC_PATT3_ATTWAIT3_4 ((uint32_t)0x00001000) /*!<Bit 4 */
+#define FSMC_PATT3_ATTWAIT3_5 ((uint32_t)0x00002000) /*!<Bit 5 */
+#define FSMC_PATT3_ATTWAIT3_6 ((uint32_t)0x00004000) /*!<Bit 6 */
+#define FSMC_PATT3_ATTWAIT3_7 ((uint32_t)0x00008000) /*!<Bit 7 */
+
+#define FSMC_PATT3_ATTHOLD3 ((uint32_t)0x00FF0000) /*!<ATTHOLD3[7:0] bits (Attribute memory 3 hold time) */
+#define FSMC_PATT3_ATTHOLD3_0 ((uint32_t)0x00010000) /*!<Bit 0 */
+#define FSMC_PATT3_ATTHOLD3_1 ((uint32_t)0x00020000) /*!<Bit 1 */
+#define FSMC_PATT3_ATTHOLD3_2 ((uint32_t)0x00040000) /*!<Bit 2 */
+#define FSMC_PATT3_ATTHOLD3_3 ((uint32_t)0x00080000) /*!<Bit 3 */
+#define FSMC_PATT3_ATTHOLD3_4 ((uint32_t)0x00100000) /*!<Bit 4 */
+#define FSMC_PATT3_ATTHOLD3_5 ((uint32_t)0x00200000) /*!<Bit 5 */
+#define FSMC_PATT3_ATTHOLD3_6 ((uint32_t)0x00400000) /*!<Bit 6 */
+#define FSMC_PATT3_ATTHOLD3_7 ((uint32_t)0x00800000) /*!<Bit 7 */
+
+#define FSMC_PATT3_ATTHIZ3 ((uint32_t)0xFF000000) /*!<ATTHIZ3[7:0] bits (Attribute memory 3 databus HiZ time) */
+#define FSMC_PATT3_ATTHIZ3_0 ((uint32_t)0x01000000) /*!<Bit 0 */
+#define FSMC_PATT3_ATTHIZ3_1 ((uint32_t)0x02000000) /*!<Bit 1 */
+#define FSMC_PATT3_ATTHIZ3_2 ((uint32_t)0x04000000) /*!<Bit 2 */
+#define FSMC_PATT3_ATTHIZ3_3 ((uint32_t)0x08000000) /*!<Bit 3 */
+#define FSMC_PATT3_ATTHIZ3_4 ((uint32_t)0x10000000) /*!<Bit 4 */
+#define FSMC_PATT3_ATTHIZ3_5 ((uint32_t)0x20000000) /*!<Bit 5 */
+#define FSMC_PATT3_ATTHIZ3_6 ((uint32_t)0x40000000) /*!<Bit 6 */
+#define FSMC_PATT3_ATTHIZ3_7 ((uint32_t)0x80000000) /*!<Bit 7 */
+
+/****************** Bit definition for FSMC_PATT4 register ******************/
+#define FSMC_PATT4_ATTSET4 ((uint32_t)0x000000FF) /*!<ATTSET4[7:0] bits (Attribute memory 4 setup time) */
+#define FSMC_PATT4_ATTSET4_0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define FSMC_PATT4_ATTSET4_1 ((uint32_t)0x00000002) /*!<Bit 1 */
+#define FSMC_PATT4_ATTSET4_2 ((uint32_t)0x00000004) /*!<Bit 2 */
+#define FSMC_PATT4_ATTSET4_3 ((uint32_t)0x00000008) /*!<Bit 3 */
+#define FSMC_PATT4_ATTSET4_4 ((uint32_t)0x00000010) /*!<Bit 4 */
+#define FSMC_PATT4_ATTSET4_5 ((uint32_t)0x00000020) /*!<Bit 5 */
+#define FSMC_PATT4_ATTSET4_6 ((uint32_t)0x00000040) /*!<Bit 6 */
+#define FSMC_PATT4_ATTSET4_7 ((uint32_t)0x00000080) /*!<Bit 7 */
+
+#define FSMC_PATT4_ATTWAIT4 ((uint32_t)0x0000FF00) /*!<ATTWAIT4[7:0] bits (Attribute memory 4 wait time) */
+#define FSMC_PATT4_ATTWAIT4_0 ((uint32_t)0x00000100) /*!<Bit 0 */
+#define FSMC_PATT4_ATTWAIT4_1 ((uint32_t)0x00000200) /*!<Bit 1 */
+#define FSMC_PATT4_ATTWAIT4_2 ((uint32_t)0x00000400) /*!<Bit 2 */
+#define FSMC_PATT4_ATTWAIT4_3 ((uint32_t)0x00000800) /*!<Bit 3 */
+#define FSMC_PATT4_ATTWAIT4_4 ((uint32_t)0x00001000) /*!<Bit 4 */
+#define FSMC_PATT4_ATTWAIT4_5 ((uint32_t)0x00002000) /*!<Bit 5 */
+#define FSMC_PATT4_ATTWAIT4_6 ((uint32_t)0x00004000) /*!<Bit 6 */
+#define FSMC_PATT4_ATTWAIT4_7 ((uint32_t)0x00008000) /*!<Bit 7 */
+
+#define FSMC_PATT4_ATTHOLD4 ((uint32_t)0x00FF0000) /*!<ATTHOLD4[7:0] bits (Attribute memory 4 hold time) */
+#define FSMC_PATT4_ATTHOLD4_0 ((uint32_t)0x00010000) /*!<Bit 0 */
+#define FSMC_PATT4_ATTHOLD4_1 ((uint32_t)0x00020000) /*!<Bit 1 */
+#define FSMC_PATT4_ATTHOLD4_2 ((uint32_t)0x00040000) /*!<Bit 2 */
+#define FSMC_PATT4_ATTHOLD4_3 ((uint32_t)0x00080000) /*!<Bit 3 */
+#define FSMC_PATT4_ATTHOLD4_4 ((uint32_t)0x00100000) /*!<Bit 4 */
+#define FSMC_PATT4_ATTHOLD4_5 ((uint32_t)0x00200000) /*!<Bit 5 */
+#define FSMC_PATT4_ATTHOLD4_6 ((uint32_t)0x00400000) /*!<Bit 6 */
+#define FSMC_PATT4_ATTHOLD4_7 ((uint32_t)0x00800000) /*!<Bit 7 */
+
+#define FSMC_PATT4_ATTHIZ4 ((uint32_t)0xFF000000) /*!<ATTHIZ4[7:0] bits (Attribute memory 4 databus HiZ time) */
+#define FSMC_PATT4_ATTHIZ4_0 ((uint32_t)0x01000000) /*!<Bit 0 */
+#define FSMC_PATT4_ATTHIZ4_1 ((uint32_t)0x02000000) /*!<Bit 1 */
+#define FSMC_PATT4_ATTHIZ4_2 ((uint32_t)0x04000000) /*!<Bit 2 */
+#define FSMC_PATT4_ATTHIZ4_3 ((uint32_t)0x08000000) /*!<Bit 3 */
+#define FSMC_PATT4_ATTHIZ4_4 ((uint32_t)0x10000000) /*!<Bit 4 */
+#define FSMC_PATT4_ATTHIZ4_5 ((uint32_t)0x20000000) /*!<Bit 5 */
+#define FSMC_PATT4_ATTHIZ4_6 ((uint32_t)0x40000000) /*!<Bit 6 */
+#define FSMC_PATT4_ATTHIZ4_7 ((uint32_t)0x80000000) /*!<Bit 7 */
+
+/****************** Bit definition for FSMC_PIO4 register *******************/
+#define FSMC_PIO4_IOSET4 ((uint32_t)0x000000FF) /*!<IOSET4[7:0] bits (I/O 4 setup time) */
+#define FSMC_PIO4_IOSET4_0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define FSMC_PIO4_IOSET4_1 ((uint32_t)0x00000002) /*!<Bit 1 */
+#define FSMC_PIO4_IOSET4_2 ((uint32_t)0x00000004) /*!<Bit 2 */
+#define FSMC_PIO4_IOSET4_3 ((uint32_t)0x00000008) /*!<Bit 3 */
+#define FSMC_PIO4_IOSET4_4 ((uint32_t)0x00000010) /*!<Bit 4 */
+#define FSMC_PIO4_IOSET4_5 ((uint32_t)0x00000020) /*!<Bit 5 */
+#define FSMC_PIO4_IOSET4_6 ((uint32_t)0x00000040) /*!<Bit 6 */
+#define FSMC_PIO4_IOSET4_7 ((uint32_t)0x00000080) /*!<Bit 7 */
+
+#define FSMC_PIO4_IOWAIT4 ((uint32_t)0x0000FF00) /*!<IOWAIT4[7:0] bits (I/O 4 wait time) */
+#define FSMC_PIO4_IOWAIT4_0 ((uint32_t)0x00000100) /*!<Bit 0 */
+#define FSMC_PIO4_IOWAIT4_1 ((uint32_t)0x00000200) /*!<Bit 1 */
+#define FSMC_PIO4_IOWAIT4_2 ((uint32_t)0x00000400) /*!<Bit 2 */
+#define FSMC_PIO4_IOWAIT4_3 ((uint32_t)0x00000800) /*!<Bit 3 */
+#define FSMC_PIO4_IOWAIT4_4 ((uint32_t)0x00001000) /*!<Bit 4 */
+#define FSMC_PIO4_IOWAIT4_5 ((uint32_t)0x00002000) /*!<Bit 5 */
+#define FSMC_PIO4_IOWAIT4_6 ((uint32_t)0x00004000) /*!<Bit 6 */
+#define FSMC_PIO4_IOWAIT4_7 ((uint32_t)0x00008000) /*!<Bit 7 */
+
+#define FSMC_PIO4_IOHOLD4 ((uint32_t)0x00FF0000) /*!<IOHOLD4[7:0] bits (I/O 4 hold time) */
+#define FSMC_PIO4_IOHOLD4_0 ((uint32_t)0x00010000) /*!<Bit 0 */
+#define FSMC_PIO4_IOHOLD4_1 ((uint32_t)0x00020000) /*!<Bit 1 */
+#define FSMC_PIO4_IOHOLD4_2 ((uint32_t)0x00040000) /*!<Bit 2 */
+#define FSMC_PIO4_IOHOLD4_3 ((uint32_t)0x00080000) /*!<Bit 3 */
+#define FSMC_PIO4_IOHOLD4_4 ((uint32_t)0x00100000) /*!<Bit 4 */
+#define FSMC_PIO4_IOHOLD4_5 ((uint32_t)0x00200000) /*!<Bit 5 */
+#define FSMC_PIO4_IOHOLD4_6 ((uint32_t)0x00400000) /*!<Bit 6 */
+#define FSMC_PIO4_IOHOLD4_7 ((uint32_t)0x00800000) /*!<Bit 7 */
+
+#define FSMC_PIO4_IOHIZ4 ((uint32_t)0xFF000000) /*!<IOHIZ4[7:0] bits (I/O 4 databus HiZ time) */
+#define FSMC_PIO4_IOHIZ4_0 ((uint32_t)0x01000000) /*!<Bit 0 */
+#define FSMC_PIO4_IOHIZ4_1 ((uint32_t)0x02000000) /*!<Bit 1 */
+#define FSMC_PIO4_IOHIZ4_2 ((uint32_t)0x04000000) /*!<Bit 2 */
+#define FSMC_PIO4_IOHIZ4_3 ((uint32_t)0x08000000) /*!<Bit 3 */
+#define FSMC_PIO4_IOHIZ4_4 ((uint32_t)0x10000000) /*!<Bit 4 */
+#define FSMC_PIO4_IOHIZ4_5 ((uint32_t)0x20000000) /*!<Bit 5 */
+#define FSMC_PIO4_IOHIZ4_6 ((uint32_t)0x40000000) /*!<Bit 6 */
+#define FSMC_PIO4_IOHIZ4_7 ((uint32_t)0x80000000) /*!<Bit 7 */
+
+/****************** Bit definition for FSMC_ECCR2 register ******************/
+#define FSMC_ECCR2_ECC2 ((uint32_t)0xFFFFFFFF) /*!<ECC result */
+
+/****************** Bit definition for FSMC_ECCR3 register ******************/
+#define FSMC_ECCR3_ECC3 ((uint32_t)0xFFFFFFFF) /*!<ECC result */
+
+/******************************************************************************/
+/* */
+/* General Purpose I/O */
+/* */
+/******************************************************************************/
+/****************** Bits definition for GPIO_MODER register *****************/
+#define GPIO_MODER_MODER0 ((uint32_t)0x00000003)
+#define GPIO_MODER_MODER0_0 ((uint32_t)0x00000001)
+#define GPIO_MODER_MODER0_1 ((uint32_t)0x00000002)
+
+#define GPIO_MODER_MODER1 ((uint32_t)0x0000000C)
+#define GPIO_MODER_MODER1_0 ((uint32_t)0x00000004)
+#define GPIO_MODER_MODER1_1 ((uint32_t)0x00000008)
+
+#define GPIO_MODER_MODER2 ((uint32_t)0x00000030)
+#define GPIO_MODER_MODER2_0 ((uint32_t)0x00000010)
+#define GPIO_MODER_MODER2_1 ((uint32_t)0x00000020)
+
+#define GPIO_MODER_MODER3 ((uint32_t)0x000000C0)
+#define GPIO_MODER_MODER3_0 ((uint32_t)0x00000040)
+#define GPIO_MODER_MODER3_1 ((uint32_t)0x00000080)
+
+#define GPIO_MODER_MODER4 ((uint32_t)0x00000300)
+#define GPIO_MODER_MODER4_0 ((uint32_t)0x00000100)
+#define GPIO_MODER_MODER4_1 ((uint32_t)0x00000200)
+
+#define GPIO_MODER_MODER5 ((uint32_t)0x00000C00)
+#define GPIO_MODER_MODER5_0 ((uint32_t)0x00000400)
+#define GPIO_MODER_MODER5_1 ((uint32_t)0x00000800)
+
+#define GPIO_MODER_MODER6 ((uint32_t)0x00003000)
+#define GPIO_MODER_MODER6_0 ((uint32_t)0x00001000)
+#define GPIO_MODER_MODER6_1 ((uint32_t)0x00002000)
+
+#define GPIO_MODER_MODER7 ((uint32_t)0x0000C000)
+#define GPIO_MODER_MODER7_0 ((uint32_t)0x00004000)
+#define GPIO_MODER_MODER7_1 ((uint32_t)0x00008000)
+
+#define GPIO_MODER_MODER8 ((uint32_t)0x00030000)
+#define GPIO_MODER_MODER8_0 ((uint32_t)0x00010000)
+#define GPIO_MODER_MODER8_1 ((uint32_t)0x00020000)
+
+#define GPIO_MODER_MODER9 ((uint32_t)0x000C0000)
+#define GPIO_MODER_MODER9_0 ((uint32_t)0x00040000)
+#define GPIO_MODER_MODER9_1 ((uint32_t)0x00080000)
+
+#define GPIO_MODER_MODER10 ((uint32_t)0x00300000)
+#define GPIO_MODER_MODER10_0 ((uint32_t)0x00100000)
+#define GPIO_MODER_MODER10_1 ((uint32_t)0x00200000)
+
+#define GPIO_MODER_MODER11 ((uint32_t)0x00C00000)
+#define GPIO_MODER_MODER11_0 ((uint32_t)0x00400000)
+#define GPIO_MODER_MODER11_1 ((uint32_t)0x00800000)
+
+#define GPIO_MODER_MODER12 ((uint32_t)0x03000000)
+#define GPIO_MODER_MODER12_0 ((uint32_t)0x01000000)
+#define GPIO_MODER_MODER12_1 ((uint32_t)0x02000000)
+
+#define GPIO_MODER_MODER13 ((uint32_t)0x0C000000)
+#define GPIO_MODER_MODER13_0 ((uint32_t)0x04000000)
+#define GPIO_MODER_MODER13_1 ((uint32_t)0x08000000)
+
+#define GPIO_MODER_MODER14 ((uint32_t)0x30000000)
+#define GPIO_MODER_MODER14_0 ((uint32_t)0x10000000)
+#define GPIO_MODER_MODER14_1 ((uint32_t)0x20000000)
+
+#define GPIO_MODER_MODER15 ((uint32_t)0xC0000000)
+#define GPIO_MODER_MODER15_0 ((uint32_t)0x40000000)
+#define GPIO_MODER_MODER15_1 ((uint32_t)0x80000000)
+
+/****************** Bits definition for GPIO_OTYPER register ****************/
+#define GPIO_OTYPER_OT_0 ((uint32_t)0x00000001)
+#define GPIO_OTYPER_OT_1 ((uint32_t)0x00000002)
+#define GPIO_OTYPER_OT_2 ((uint32_t)0x00000004)
+#define GPIO_OTYPER_OT_3 ((uint32_t)0x00000008)
+#define GPIO_OTYPER_OT_4 ((uint32_t)0x00000010)
+#define GPIO_OTYPER_OT_5 ((uint32_t)0x00000020)
+#define GPIO_OTYPER_OT_6 ((uint32_t)0x00000040)
+#define GPIO_OTYPER_OT_7 ((uint32_t)0x00000080)
+#define GPIO_OTYPER_OT_8 ((uint32_t)0x00000100)
+#define GPIO_OTYPER_OT_9 ((uint32_t)0x00000200)
+#define GPIO_OTYPER_OT_10 ((uint32_t)0x00000400)
+#define GPIO_OTYPER_OT_11 ((uint32_t)0x00000800)
+#define GPIO_OTYPER_OT_12 ((uint32_t)0x00001000)
+#define GPIO_OTYPER_OT_13 ((uint32_t)0x00002000)
+#define GPIO_OTYPER_OT_14 ((uint32_t)0x00004000)
+#define GPIO_OTYPER_OT_15 ((uint32_t)0x00008000)
+
+/****************** Bits definition for GPIO_OSPEEDR register ***************/
+#define GPIO_OSPEEDER_OSPEEDR0 ((uint32_t)0x00000003)
+#define GPIO_OSPEEDER_OSPEEDR0_0 ((uint32_t)0x00000001)
+#define GPIO_OSPEEDER_OSPEEDR0_1 ((uint32_t)0x00000002)
+
+#define GPIO_OSPEEDER_OSPEEDR1 ((uint32_t)0x0000000C)
+#define GPIO_OSPEEDER_OSPEEDR1_0 ((uint32_t)0x00000004)
+#define GPIO_OSPEEDER_OSPEEDR1_1 ((uint32_t)0x00000008)
+
+#define GPIO_OSPEEDER_OSPEEDR2 ((uint32_t)0x00000030)
+#define GPIO_OSPEEDER_OSPEEDR2_0 ((uint32_t)0x00000010)
+#define GPIO_OSPEEDER_OSPEEDR2_1 ((uint32_t)0x00000020)
+
+#define GPIO_OSPEEDER_OSPEEDR3 ((uint32_t)0x000000C0)
+#define GPIO_OSPEEDER_OSPEEDR3_0 ((uint32_t)0x00000040)
+#define GPIO_OSPEEDER_OSPEEDR3_1 ((uint32_t)0x00000080)
+
+#define GPIO_OSPEEDER_OSPEEDR4 ((uint32_t)0x00000300)
+#define GPIO_OSPEEDER_OSPEEDR4_0 ((uint32_t)0x00000100)
+#define GPIO_OSPEEDER_OSPEEDR4_1 ((uint32_t)0x00000200)
+
+#define GPIO_OSPEEDER_OSPEEDR5 ((uint32_t)0x00000C00)
+#define GPIO_OSPEEDER_OSPEEDR5_0 ((uint32_t)0x00000400)
+#define GPIO_OSPEEDER_OSPEEDR5_1 ((uint32_t)0x00000800)
+
+#define GPIO_OSPEEDER_OSPEEDR6 ((uint32_t)0x00003000)
+#define GPIO_OSPEEDER_OSPEEDR6_0 ((uint32_t)0x00001000)
+#define GPIO_OSPEEDER_OSPEEDR6_1 ((uint32_t)0x00002000)
+
+#define GPIO_OSPEEDER_OSPEEDR7 ((uint32_t)0x0000C000)
+#define GPIO_OSPEEDER_OSPEEDR7_0 ((uint32_t)0x00004000)
+#define GPIO_OSPEEDER_OSPEEDR7_1 ((uint32_t)0x00008000)
+
+#define GPIO_OSPEEDER_OSPEEDR8 ((uint32_t)0x00030000)
+#define GPIO_OSPEEDER_OSPEEDR8_0 ((uint32_t)0x00010000)
+#define GPIO_OSPEEDER_OSPEEDR8_1 ((uint32_t)0x00020000)
+
+#define GPIO_OSPEEDER_OSPEEDR9 ((uint32_t)0x000C0000)
+#define GPIO_OSPEEDER_OSPEEDR9_0 ((uint32_t)0x00040000)
+#define GPIO_OSPEEDER_OSPEEDR9_1 ((uint32_t)0x00080000)
+
+#define GPIO_OSPEEDER_OSPEEDR10 ((uint32_t)0x00300000)
+#define GPIO_OSPEEDER_OSPEEDR10_0 ((uint32_t)0x00100000)
+#define GPIO_OSPEEDER_OSPEEDR10_1 ((uint32_t)0x00200000)
+
+#define GPIO_OSPEEDER_OSPEEDR11 ((uint32_t)0x00C00000)
+#define GPIO_OSPEEDER_OSPEEDR11_0 ((uint32_t)0x00400000)
+#define GPIO_OSPEEDER_OSPEEDR11_1 ((uint32_t)0x00800000)
+
+#define GPIO_OSPEEDER_OSPEEDR12 ((uint32_t)0x03000000)
+#define GPIO_OSPEEDER_OSPEEDR12_0 ((uint32_t)0x01000000)
+#define GPIO_OSPEEDER_OSPEEDR12_1 ((uint32_t)0x02000000)
+
+#define GPIO_OSPEEDER_OSPEEDR13 ((uint32_t)0x0C000000)
+#define GPIO_OSPEEDER_OSPEEDR13_0 ((uint32_t)0x04000000)
+#define GPIO_OSPEEDER_OSPEEDR13_1 ((uint32_t)0x08000000)
+
+#define GPIO_OSPEEDER_OSPEEDR14 ((uint32_t)0x30000000)
+#define GPIO_OSPEEDER_OSPEEDR14_0 ((uint32_t)0x10000000)
+#define GPIO_OSPEEDER_OSPEEDR14_1 ((uint32_t)0x20000000)
+
+#define GPIO_OSPEEDER_OSPEEDR15 ((uint32_t)0xC0000000)
+#define GPIO_OSPEEDER_OSPEEDR15_0 ((uint32_t)0x40000000)
+#define GPIO_OSPEEDER_OSPEEDR15_1 ((uint32_t)0x80000000)
+
+/****************** Bits definition for GPIO_PUPDR register *****************/
+#define GPIO_PUPDR_PUPDR0 ((uint32_t)0x00000003)
+#define GPIO_PUPDR_PUPDR0_0 ((uint32_t)0x00000001)
+#define GPIO_PUPDR_PUPDR0_1 ((uint32_t)0x00000002)
+
+#define GPIO_PUPDR_PUPDR1 ((uint32_t)0x0000000C)
+#define GPIO_PUPDR_PUPDR1_0 ((uint32_t)0x00000004)
+#define GPIO_PUPDR_PUPDR1_1 ((uint32_t)0x00000008)
+
+#define GPIO_PUPDR_PUPDR2 ((uint32_t)0x00000030)
+#define GPIO_PUPDR_PUPDR2_0 ((uint32_t)0x00000010)
+#define GPIO_PUPDR_PUPDR2_1 ((uint32_t)0x00000020)
+
+#define GPIO_PUPDR_PUPDR3 ((uint32_t)0x000000C0)
+#define GPIO_PUPDR_PUPDR3_0 ((uint32_t)0x00000040)
+#define GPIO_PUPDR_PUPDR3_1 ((uint32_t)0x00000080)
+
+#define GPIO_PUPDR_PUPDR4 ((uint32_t)0x00000300)
+#define GPIO_PUPDR_PUPDR4_0 ((uint32_t)0x00000100)
+#define GPIO_PUPDR_PUPDR4_1 ((uint32_t)0x00000200)
+
+#define GPIO_PUPDR_PUPDR5 ((uint32_t)0x00000C00)
+#define GPIO_PUPDR_PUPDR5_0 ((uint32_t)0x00000400)
+#define GPIO_PUPDR_PUPDR5_1 ((uint32_t)0x00000800)
+
+#define GPIO_PUPDR_PUPDR6 ((uint32_t)0x00003000)
+#define GPIO_PUPDR_PUPDR6_0 ((uint32_t)0x00001000)
+#define GPIO_PUPDR_PUPDR6_1 ((uint32_t)0x00002000)
+
+#define GPIO_PUPDR_PUPDR7 ((uint32_t)0x0000C000)
+#define GPIO_PUPDR_PUPDR7_0 ((uint32_t)0x00004000)
+#define GPIO_PUPDR_PUPDR7_1 ((uint32_t)0x00008000)
+
+#define GPIO_PUPDR_PUPDR8 ((uint32_t)0x00030000)
+#define GPIO_PUPDR_PUPDR8_0 ((uint32_t)0x00010000)
+#define GPIO_PUPDR_PUPDR8_1 ((uint32_t)0x00020000)
+
+#define GPIO_PUPDR_PUPDR9 ((uint32_t)0x000C0000)
+#define GPIO_PUPDR_PUPDR9_0 ((uint32_t)0x00040000)
+#define GPIO_PUPDR_PUPDR9_1 ((uint32_t)0x00080000)
+
+#define GPIO_PUPDR_PUPDR10 ((uint32_t)0x00300000)
+#define GPIO_PUPDR_PUPDR10_0 ((uint32_t)0x00100000)
+#define GPIO_PUPDR_PUPDR10_1 ((uint32_t)0x00200000)
+
+#define GPIO_PUPDR_PUPDR11 ((uint32_t)0x00C00000)
+#define GPIO_PUPDR_PUPDR11_0 ((uint32_t)0x00400000)
+#define GPIO_PUPDR_PUPDR11_1 ((uint32_t)0x00800000)
+
+#define GPIO_PUPDR_PUPDR12 ((uint32_t)0x03000000)
+#define GPIO_PUPDR_PUPDR12_0 ((uint32_t)0x01000000)
+#define GPIO_PUPDR_PUPDR12_1 ((uint32_t)0x02000000)
+
+#define GPIO_PUPDR_PUPDR13 ((uint32_t)0x0C000000)
+#define GPIO_PUPDR_PUPDR13_0 ((uint32_t)0x04000000)
+#define GPIO_PUPDR_PUPDR13_1 ((uint32_t)0x08000000)
+
+#define GPIO_PUPDR_PUPDR14 ((uint32_t)0x30000000)
+#define GPIO_PUPDR_PUPDR14_0 ((uint32_t)0x10000000)
+#define GPIO_PUPDR_PUPDR14_1 ((uint32_t)0x20000000)
+
+#define GPIO_PUPDR_PUPDR15 ((uint32_t)0xC0000000)
+#define GPIO_PUPDR_PUPDR15_0 ((uint32_t)0x40000000)
+#define GPIO_PUPDR_PUPDR15_1 ((uint32_t)0x80000000)
+
+/****************** Bits definition for GPIO_IDR register *******************/
+#define GPIO_OTYPER_IDR_0 ((uint32_t)0x00000001)
+#define GPIO_OTYPER_IDR_1 ((uint32_t)0x00000002)
+#define GPIO_OTYPER_IDR_2 ((uint32_t)0x00000004)
+#define GPIO_OTYPER_IDR_3 ((uint32_t)0x00000008)
+#define GPIO_OTYPER_IDR_4 ((uint32_t)0x00000010)
+#define GPIO_OTYPER_IDR_5 ((uint32_t)0x00000020)
+#define GPIO_OTYPER_IDR_6 ((uint32_t)0x00000040)
+#define GPIO_OTYPER_IDR_7 ((uint32_t)0x00000080)
+#define GPIO_OTYPER_IDR_8 ((uint32_t)0x00000100)
+#define GPIO_OTYPER_IDR_9 ((uint32_t)0x00000200)
+#define GPIO_OTYPER_IDR_10 ((uint32_t)0x00000400)
+#define GPIO_OTYPER_IDR_11 ((uint32_t)0x00000800)
+#define GPIO_OTYPER_IDR_12 ((uint32_t)0x00001000)
+#define GPIO_OTYPER_IDR_13 ((uint32_t)0x00002000)
+#define GPIO_OTYPER_IDR_14 ((uint32_t)0x00004000)
+#define GPIO_OTYPER_IDR_15 ((uint32_t)0x00008000)
+
+/****************** Bits definition for GPIO_ODR register *******************/
+#define GPIO_OTYPER_ODR_0 ((uint32_t)0x00000001)
+#define GPIO_OTYPER_ODR_1 ((uint32_t)0x00000002)
+#define GPIO_OTYPER_ODR_2 ((uint32_t)0x00000004)
+#define GPIO_OTYPER_ODR_3 ((uint32_t)0x00000008)
+#define GPIO_OTYPER_ODR_4 ((uint32_t)0x00000010)
+#define GPIO_OTYPER_ODR_5 ((uint32_t)0x00000020)
+#define GPIO_OTYPER_ODR_6 ((uint32_t)0x00000040)
+#define GPIO_OTYPER_ODR_7 ((uint32_t)0x00000080)
+#define GPIO_OTYPER_ODR_8 ((uint32_t)0x00000100)
+#define GPIO_OTYPER_ODR_9 ((uint32_t)0x00000200)
+#define GPIO_OTYPER_ODR_10 ((uint32_t)0x00000400)
+#define GPIO_OTYPER_ODR_11 ((uint32_t)0x00000800)
+#define GPIO_OTYPER_ODR_12 ((uint32_t)0x00001000)
+#define GPIO_OTYPER_ODR_13 ((uint32_t)0x00002000)
+#define GPIO_OTYPER_ODR_14 ((uint32_t)0x00004000)
+#define GPIO_OTYPER_ODR_15 ((uint32_t)0x00008000)
+
+/****************** Bits definition for GPIO_BSRR register ******************/
+#define GPIO_BSRR_BS_0 ((uint32_t)0x00000001)
+#define GPIO_BSRR_BS_1 ((uint32_t)0x00000002)
+#define GPIO_BSRR_BS_2 ((uint32_t)0x00000004)
+#define GPIO_BSRR_BS_3 ((uint32_t)0x00000008)
+#define GPIO_BSRR_BS_4 ((uint32_t)0x00000010)
+#define GPIO_BSRR_BS_5 ((uint32_t)0x00000020)
+#define GPIO_BSRR_BS_6 ((uint32_t)0x00000040)
+#define GPIO_BSRR_BS_7 ((uint32_t)0x00000080)
+#define GPIO_BSRR_BS_8 ((uint32_t)0x00000100)
+#define GPIO_BSRR_BS_9 ((uint32_t)0x00000200)
+#define GPIO_BSRR_BS_10 ((uint32_t)0x00000400)
+#define GPIO_BSRR_BS_11 ((uint32_t)0x00000800)
+#define GPIO_BSRR_BS_12 ((uint32_t)0x00001000)
+#define GPIO_BSRR_BS_13 ((uint32_t)0x00002000)
+#define GPIO_BSRR_BS_14 ((uint32_t)0x00004000)
+#define GPIO_BSRR_BS_15 ((uint32_t)0x00008000)
+#define GPIO_BSRR_BR_0 ((uint32_t)0x00010000)
+#define GPIO_BSRR_BR_1 ((uint32_t)0x00020000)
+#define GPIO_BSRR_BR_2 ((uint32_t)0x00040000)
+#define GPIO_BSRR_BR_3 ((uint32_t)0x00080000)
+#define GPIO_BSRR_BR_4 ((uint32_t)0x00100000)
+#define GPIO_BSRR_BR_5 ((uint32_t)0x00200000)
+#define GPIO_BSRR_BR_6 ((uint32_t)0x00400000)
+#define GPIO_BSRR_BR_7 ((uint32_t)0x00800000)
+#define GPIO_BSRR_BR_8 ((uint32_t)0x01000000)
+#define GPIO_BSRR_BR_9 ((uint32_t)0x02000000)
+#define GPIO_BSRR_BR_10 ((uint32_t)0x04000000)
+#define GPIO_BSRR_BR_11 ((uint32_t)0x08000000)
+#define GPIO_BSRR_BR_12 ((uint32_t)0x10000000)
+#define GPIO_BSRR_BR_13 ((uint32_t)0x20000000)
+#define GPIO_BSRR_BR_14 ((uint32_t)0x40000000)
+#define GPIO_BSRR_BR_15 ((uint32_t)0x80000000)
+
+/******************************************************************************/
+/* */
+/* HASH */
+/* */
+/******************************************************************************/
+/****************** Bits definition for HASH_CR register ********************/
+#define HASH_CR_INIT ((uint32_t)0x00000004)
+#define HASH_CR_DMAE ((uint32_t)0x00000008)
+#define HASH_CR_DATATYPE ((uint32_t)0x00000030)
+#define HASH_CR_DATATYPE_0 ((uint32_t)0x00000010)
+#define HASH_CR_DATATYPE_1 ((uint32_t)0x00000020)
+#define HASH_CR_MODE ((uint32_t)0x00000040)
+#define HASH_CR_ALGO ((uint32_t)0x00000080)
+#define HASH_CR_NBW ((uint32_t)0x00000F00)
+#define HASH_CR_NBW_0 ((uint32_t)0x00000100)
+#define HASH_CR_NBW_1 ((uint32_t)0x00000200)
+#define HASH_CR_NBW_2 ((uint32_t)0x00000400)
+#define HASH_CR_NBW_3 ((uint32_t)0x00000800)
+#define HASH_CR_DINNE ((uint32_t)0x00001000)
+#define HASH_CR_LKEY ((uint32_t)0x00010000)
+
+/****************** Bits definition for HASH_STR register *******************/
+#define HASH_STR_NBW ((uint32_t)0x0000001F)
+#define HASH_STR_NBW_0 ((uint32_t)0x00000001)
+#define HASH_STR_NBW_1 ((uint32_t)0x00000002)
+#define HASH_STR_NBW_2 ((uint32_t)0x00000004)
+#define HASH_STR_NBW_3 ((uint32_t)0x00000008)
+#define HASH_STR_NBW_4 ((uint32_t)0x00000010)
+#define HASH_STR_DCAL ((uint32_t)0x00000100)
+
+/****************** Bits definition for HASH_IMR register *******************/
+#define HASH_IMR_DINIM ((uint32_t)0x00000001)
+#define HASH_IMR_DCIM ((uint32_t)0x00000002)
+
+/****************** Bits definition for HASH_SR register ********************/
+#define HASH_SR_DINIS ((uint32_t)0x00000001)
+#define HASH_SR_DCIS ((uint32_t)0x00000002)
+#define HASH_SR_DMAS ((uint32_t)0x00000004)
+#define HASH_SR_BUSY ((uint32_t)0x00000008)
+
+/******************************************************************************/
+/* */
+/* Inter-integrated Circuit Interface */
+/* */
+/******************************************************************************/
+/******************* Bit definition for I2C_CR1 register ********************/
+#define I2C_CR1_PE ((uint16_t)0x0001) /*!<Peripheral Enable */
+#define I2C_CR1_SMBUS ((uint16_t)0x0002) /*!<SMBus Mode */
+#define I2C_CR1_SMBTYPE ((uint16_t)0x0008) /*!<SMBus Type */
+#define I2C_CR1_ENARP ((uint16_t)0x0010) /*!<ARP Enable */
+#define I2C_CR1_ENPEC ((uint16_t)0x0020) /*!<PEC Enable */
+#define I2C_CR1_ENGC ((uint16_t)0x0040) /*!<General Call Enable */
+#define I2C_CR1_NOSTRETCH ((uint16_t)0x0080) /*!<Clock Stretching Disable (Slave mode) */
+#define I2C_CR1_START ((uint16_t)0x0100) /*!<Start Generation */
+#define I2C_CR1_STOP ((uint16_t)0x0200) /*!<Stop Generation */
+#define I2C_CR1_ACK ((uint16_t)0x0400) /*!<Acknowledge Enable */
+#define I2C_CR1_POS ((uint16_t)0x0800) /*!<Acknowledge/PEC Position (for data reception) */
+#define I2C_CR1_PEC ((uint16_t)0x1000) /*!<Packet Error Checking */
+#define I2C_CR1_ALERT ((uint16_t)0x2000) /*!<SMBus Alert */
+#define I2C_CR1_SWRST ((uint16_t)0x8000) /*!<Software Reset */
+
+/******************* Bit definition for I2C_CR2 register ********************/
+#define I2C_CR2_FREQ ((uint16_t)0x003F) /*!<FREQ[5:0] bits (Peripheral Clock Frequency) */
+#define I2C_CR2_FREQ_0 ((uint16_t)0x0001) /*!<Bit 0 */
+#define I2C_CR2_FREQ_1 ((uint16_t)0x0002) /*!<Bit 1 */
+#define I2C_CR2_FREQ_2 ((uint16_t)0x0004) /*!<Bit 2 */
+#define I2C_CR2_FREQ_3 ((uint16_t)0x0008) /*!<Bit 3 */
+#define I2C_CR2_FREQ_4 ((uint16_t)0x0010) /*!<Bit 4 */
+#define I2C_CR2_FREQ_5 ((uint16_t)0x0020) /*!<Bit 5 */
+
+#define I2C_CR2_ITERREN ((uint16_t)0x0100) /*!<Error Interrupt Enable */
+#define I2C_CR2_ITEVTEN ((uint16_t)0x0200) /*!<Event Interrupt Enable */
+#define I2C_CR2_ITBUFEN ((uint16_t)0x0400) /*!<Buffer Interrupt Enable */
+#define I2C_CR2_DMAEN ((uint16_t)0x0800) /*!<DMA Requests Enable */
+#define I2C_CR2_LAST ((uint16_t)0x1000) /*!<DMA Last Transfer */
+
+/******************* Bit definition for I2C_OAR1 register *******************/
+#define I2C_OAR1_ADD1_7 ((uint16_t)0x00FE) /*!<Interface Address */
+#define I2C_OAR1_ADD8_9 ((uint16_t)0x0300) /*!<Interface Address */
+
+#define I2C_OAR1_ADD0 ((uint16_t)0x0001) /*!<Bit 0 */
+#define I2C_OAR1_ADD1 ((uint16_t)0x0002) /*!<Bit 1 */
+#define I2C_OAR1_ADD2 ((uint16_t)0x0004) /*!<Bit 2 */
+#define I2C_OAR1_ADD3 ((uint16_t)0x0008) /*!<Bit 3 */
+#define I2C_OAR1_ADD4 ((uint16_t)0x0010) /*!<Bit 4 */
+#define I2C_OAR1_ADD5 ((uint16_t)0x0020) /*!<Bit 5 */
+#define I2C_OAR1_ADD6 ((uint16_t)0x0040) /*!<Bit 6 */
+#define I2C_OAR1_ADD7 ((uint16_t)0x0080) /*!<Bit 7 */
+#define I2C_OAR1_ADD8 ((uint16_t)0x0100) /*!<Bit 8 */
+#define I2C_OAR1_ADD9 ((uint16_t)0x0200) /*!<Bit 9 */
+
+#define I2C_OAR1_ADDMODE ((uint16_t)0x8000) /*!<Addressing Mode (Slave mode) */
+
+/******************* Bit definition for I2C_OAR2 register *******************/
+#define I2C_OAR2_ENDUAL ((uint8_t)0x01) /*!<Dual addressing mode enable */
+#define I2C_OAR2_ADD2 ((uint8_t)0xFE) /*!<Interface address */
+
+/******************** Bit definition for I2C_DR register ********************/
+#define I2C_DR_DR ((uint8_t)0xFF) /*!<8-bit Data Register */
+
+/******************* Bit definition for I2C_SR1 register ********************/
+#define I2C_SR1_SB ((uint16_t)0x0001) /*!<Start Bit (Master mode) */
+#define I2C_SR1_ADDR ((uint16_t)0x0002) /*!<Address sent (master mode)/matched (slave mode) */
+#define I2C_SR1_BTF ((uint16_t)0x0004) /*!<Byte Transfer Finished */
+#define I2C_SR1_ADD10 ((uint16_t)0x0008) /*!<10-bit header sent (Master mode) */
+#define I2C_SR1_STOPF ((uint16_t)0x0010) /*!<Stop detection (Slave mode) */
+#define I2C_SR1_RXNE ((uint16_t)0x0040) /*!<Data Register not Empty (receivers) */
+#define I2C_SR1_TXE ((uint16_t)0x0080) /*!<Data Register Empty (transmitters) */
+#define I2C_SR1_BERR ((uint16_t)0x0100) /*!<Bus Error */
+#define I2C_SR1_ARLO ((uint16_t)0x0200) /*!<Arbitration Lost (master mode) */
+#define I2C_SR1_AF ((uint16_t)0x0400) /*!<Acknowledge Failure */
+#define I2C_SR1_OVR ((uint16_t)0x0800) /*!<Overrun/Underrun */
+#define I2C_SR1_PECERR ((uint16_t)0x1000) /*!<PEC Error in reception */
+#define I2C_SR1_TIMEOUT ((uint16_t)0x4000) /*!<Timeout or Tlow Error */
+#define I2C_SR1_SMBALERT ((uint16_t)0x8000) /*!<SMBus Alert */
+
+/******************* Bit definition for I2C_SR2 register ********************/
+#define I2C_SR2_MSL ((uint16_t)0x0001) /*!<Master/Slave */
+#define I2C_SR2_BUSY ((uint16_t)0x0002) /*!<Bus Busy */
+#define I2C_SR2_TRA ((uint16_t)0x0004) /*!<Transmitter/Receiver */
+#define I2C_SR2_GENCALL ((uint16_t)0x0010) /*!<General Call Address (Slave mode) */
+#define I2C_SR2_SMBDEFAULT ((uint16_t)0x0020) /*!<SMBus Device Default Address (Slave mode) */
+#define I2C_SR2_SMBHOST ((uint16_t)0x0040) /*!<SMBus Host Header (Slave mode) */
+#define I2C_SR2_DUALF ((uint16_t)0x0080) /*!<Dual Flag (Slave mode) */
+#define I2C_SR2_PEC ((uint16_t)0xFF00) /*!<Packet Error Checking Register */
+
+/******************* Bit definition for I2C_CCR register ********************/
+#define I2C_CCR_CCR ((uint16_t)0x0FFF) /*!<Clock Control Register in Fast/Standard mode (Master mode) */
+#define I2C_CCR_DUTY ((uint16_t)0x4000) /*!<Fast Mode Duty Cycle */
+#define I2C_CCR_FS ((uint16_t)0x8000) /*!<I2C Master Mode Selection */
+
+/****************** Bit definition for I2C_TRISE register *******************/
+#define I2C_TRISE_TRISE ((uint8_t)0x3F) /*!<Maximum Rise Time in Fast/Standard mode (Master mode) */
+
+/******************************************************************************/
+/* */
+/* Independent WATCHDOG */
+/* */
+/******************************************************************************/
+/******************* Bit definition for IWDG_KR register ********************/
+#define IWDG_KR_KEY ((uint16_t)0xFFFF) /*!<Key value (write only, read 0000h) */
+
+/******************* Bit definition for IWDG_PR register ********************/
+#define IWDG_PR_PR ((uint8_t)0x07) /*!<PR[2:0] (Prescaler divider) */
+#define IWDG_PR_PR_0 ((uint8_t)0x01) /*!<Bit 0 */
+#define IWDG_PR_PR_1 ((uint8_t)0x02) /*!<Bit 1 */
+#define IWDG_PR_PR_2 ((uint8_t)0x04) /*!<Bit 2 */
+
+/******************* Bit definition for IWDG_RLR register *******************/
+#define IWDG_RLR_RL ((uint16_t)0x0FFF) /*!<Watchdog counter reload value */
+
+/******************* Bit definition for IWDG_SR register ********************/
+#define IWDG_SR_PVU ((uint8_t)0x01) /*!<Watchdog prescaler value update */
+#define IWDG_SR_RVU ((uint8_t)0x02) /*!<Watchdog counter reload value update */
+
+/******************************************************************************/
+/* */
+/* Power Control */
+/* */
+/******************************************************************************/
+/******************** Bit definition for PWR_CR register ********************/
+#define PWR_CR_LPDS ((uint16_t)0x0001) /*!< Low-Power Deepsleep */
+#define PWR_CR_PDDS ((uint16_t)0x0002) /*!< Power Down Deepsleep */
+#define PWR_CR_CWUF ((uint16_t)0x0004) /*!< Clear Wakeup Flag */
+#define PWR_CR_CSBF ((uint16_t)0x0008) /*!< Clear Standby Flag */
+#define PWR_CR_PVDE ((uint16_t)0x0010) /*!< Power Voltage Detector Enable */
+
+#define PWR_CR_PLS ((uint16_t)0x00E0) /*!< PLS[2:0] bits (PVD Level Selection) */
+#define PWR_CR_PLS_0 ((uint16_t)0x0020) /*!< Bit 0 */
+#define PWR_CR_PLS_1 ((uint16_t)0x0040) /*!< Bit 1 */
+#define PWR_CR_PLS_2 ((uint16_t)0x0080) /*!< Bit 2 */
+
+/*!< PVD level configuration */
+#define PWR_CR_PLS_LEV0 ((uint16_t)0x0000) /*!< PVD level 0 */
+#define PWR_CR_PLS_LEV1 ((uint16_t)0x0020) /*!< PVD level 1 */
+#define PWR_CR_PLS_LEV2 ((uint16_t)0x0040) /*!< PVD level 2 */
+#define PWR_CR_PLS_LEV3 ((uint16_t)0x0060) /*!< PVD level 3 */
+#define PWR_CR_PLS_LEV4 ((uint16_t)0x0080) /*!< PVD level 4 */
+#define PWR_CR_PLS_LEV5 ((uint16_t)0x00A0) /*!< PVD level 5 */
+#define PWR_CR_PLS_LEV6 ((uint16_t)0x00C0) /*!< PVD level 6 */
+#define PWR_CR_PLS_LEV7 ((uint16_t)0x00E0) /*!< PVD level 7 */
+
+#define PWR_CR_DBP ((uint16_t)0x0100) /*!< Disable Backup Domain write protection */
+#define PWR_CR_FPDS ((uint16_t)0x0200) /*!< Flash power down in Stop mode */
+
+
+/******************* Bit definition for PWR_CSR register ********************/
+#define PWR_CSR_WUF ((uint16_t)0x0001) /*!< Wakeup Flag */
+#define PWR_CSR_SBF ((uint16_t)0x0002) /*!< Standby Flag */
+#define PWR_CSR_PVDO ((uint16_t)0x0004) /*!< PVD Output */
+#define PWR_CSR_BRR ((uint16_t)0x0008) /*!< Backup regulator ready */
+#define PWR_CSR_EWUP ((uint16_t)0x0100) /*!< Enable WKUP pin */
+#define PWR_CSR_BRE ((uint16_t)0x0200) /*!< Backup regulator enable */
+
+/******************************************************************************/
+/* */
+/* Reset and Clock Control */
+/* */
+/******************************************************************************/
+/******************** Bit definition for RCC_CR register ********************/
+#define RCC_CR_HSION ((uint32_t)0x00000001)
+#define RCC_CR_HSIRDY ((uint32_t)0x00000002)
+
+#define RCC_CR_HSITRIM ((uint32_t)0x000000F8)
+#define RCC_CR_HSITRIM_0 ((uint32_t)0x00000008)/*!<Bit 0 */
+#define RCC_CR_HSITRIM_1 ((uint32_t)0x00000010)/*!<Bit 1 */
+#define RCC_CR_HSITRIM_2 ((uint32_t)0x00000020)/*!<Bit 2 */
+#define RCC_CR_HSITRIM_3 ((uint32_t)0x00000040)/*!<Bit 3 */
+#define RCC_CR_HSITRIM_4 ((uint32_t)0x00000080)/*!<Bit 4 */
+
+#define RCC_CR_HSICAL ((uint32_t)0x0000FF00)
+#define RCC_CR_HSICAL_0 ((uint32_t)0x00000100)/*!<Bit 0 */
+#define RCC_CR_HSICAL_1 ((uint32_t)0x00000200)/*!<Bit 1 */
+#define RCC_CR_HSICAL_2 ((uint32_t)0x00000400)/*!<Bit 2 */
+#define RCC_CR_HSICAL_3 ((uint32_t)0x00000800)/*!<Bit 3 */
+#define RCC_CR_HSICAL_4 ((uint32_t)0x00001000)/*!<Bit 4 */
+#define RCC_CR_HSICAL_5 ((uint32_t)0x00002000)/*!<Bit 5 */
+#define RCC_CR_HSICAL_6 ((uint32_t)0x00004000)/*!<Bit 6 */
+#define RCC_CR_HSICAL_7 ((uint32_t)0x00008000)/*!<Bit 7 */
+
+#define RCC_CR_HSEON ((uint32_t)0x00010000)
+#define RCC_CR_HSERDY ((uint32_t)0x00020000)
+#define RCC_CR_HSEBYP ((uint32_t)0x00040000)
+#define RCC_CR_CSSON ((uint32_t)0x00080000)
+#define RCC_CR_PLLON ((uint32_t)0x01000000)
+#define RCC_CR_PLLRDY ((uint32_t)0x02000000)
+#define RCC_CR_PLLI2SON ((uint32_t)0x04000000)
+#define RCC_CR_PLLI2SRDY ((uint32_t)0x08000000)
+
+/******************** Bit definition for RCC_PLLCFGR register ***************/
+#define RCC_PLLCFGR_PLLM ((uint32_t)0x0000003F)
+#define RCC_PLLCFGR_PLLM_0 ((uint32_t)0x00000001)
+#define RCC_PLLCFGR_PLLM_1 ((uint32_t)0x00000002)
+#define RCC_PLLCFGR_PLLM_2 ((uint32_t)0x00000004)
+#define RCC_PLLCFGR_PLLM_3 ((uint32_t)0x00000008)
+#define RCC_PLLCFGR_PLLM_4 ((uint32_t)0x00000010)
+#define RCC_PLLCFGR_PLLM_5 ((uint32_t)0x00000020)
+
+#define RCC_PLLCFGR_PLLN ((uint32_t)0x00007FC0)
+#define RCC_PLLCFGR_PLLN_0 ((uint32_t)0x00000040)
+#define RCC_PLLCFGR_PLLN_1 ((uint32_t)0x00000080)
+#define RCC_PLLCFGR_PLLN_2 ((uint32_t)0x00000100)
+#define RCC_PLLCFGR_PLLN_3 ((uint32_t)0x00000200)
+#define RCC_PLLCFGR_PLLN_4 ((uint32_t)0x00000400)
+#define RCC_PLLCFGR_PLLN_5 ((uint32_t)0x00000800)
+#define RCC_PLLCFGR_PLLN_6 ((uint32_t)0x00001000)
+#define RCC_PLLCFGR_PLLN_7 ((uint32_t)0x00002000)
+#define RCC_PLLCFGR_PLLN_8 ((uint32_t)0x00004000)
+
+#define RCC_PLLCFGR_PLLP ((uint32_t)0x00030000)
+#define RCC_PLLCFGR_PLLP_0 ((uint32_t)0x00010000)
+#define RCC_PLLCFGR_PLLP_1 ((uint32_t)0x00020000)
+
+#define RCC_PLLCFGR_PLLSRC ((uint32_t)0x00400000)
+#define RCC_PLLCFGR_PLLSRC_HSE ((uint32_t)0x00400000)
+#define RCC_PLLCFGR_PLLSRC_HSI ((uint32_t)0x00000000)
+
+#define RCC_PLLCFGR_PLLQ ((uint32_t)0x0F000000)
+#define RCC_PLLCFGR_PLLQ_0 ((uint32_t)0x01000000)
+#define RCC_PLLCFGR_PLLQ_1 ((uint32_t)0x02000000)
+#define RCC_PLLCFGR_PLLQ_2 ((uint32_t)0x04000000)
+#define RCC_PLLCFGR_PLLQ_3 ((uint32_t)0x08000000)
+
+/******************** Bit definition for RCC_CFGR register ******************/
+/*!< SW configuration */
+#define RCC_CFGR_SW ((uint32_t)0x00000003) /*!< SW[1:0] bits (System clock Switch) */
+#define RCC_CFGR_SW_0 ((uint32_t)0x00000001) /*!< Bit 0 */
+#define RCC_CFGR_SW_1 ((uint32_t)0x00000002) /*!< Bit 1 */
+
+#define RCC_CFGR_SW_HSI ((uint32_t)0x00000000) /*!< HSI selected as system clock */
+#define RCC_CFGR_SW_HSE ((uint32_t)0x00000001) /*!< HSE selected as system clock */
+#define RCC_CFGR_SW_PLL ((uint32_t)0x00000002) /*!< PLL selected as system clock */
+
+/*!< SWS configuration */
+#define RCC_CFGR_SWS ((uint32_t)0x0000000C) /*!< SWS[1:0] bits (System Clock Switch Status) */
+#define RCC_CFGR_SWS_0 ((uint32_t)0x00000004) /*!< Bit 0 */
+#define RCC_CFGR_SWS_1 ((uint32_t)0x00000008) /*!< Bit 1 */
+
+#define RCC_CFGR_SWS_HSI ((uint32_t)0x00000000) /*!< HSI oscillator used as system clock */
+#define RCC_CFGR_SWS_HSE ((uint32_t)0x00000004) /*!< HSE oscillator used as system clock */
+#define RCC_CFGR_SWS_PLL ((uint32_t)0x00000008) /*!< PLL used as system clock */
+
+/*!< HPRE configuration */
+#define RCC_CFGR_HPRE ((uint32_t)0x000000F0) /*!< HPRE[3:0] bits (AHB prescaler) */
+#define RCC_CFGR_HPRE_0 ((uint32_t)0x00000010) /*!< Bit 0 */
+#define RCC_CFGR_HPRE_1 ((uint32_t)0x00000020) /*!< Bit 1 */
+#define RCC_CFGR_HPRE_2 ((uint32_t)0x00000040) /*!< Bit 2 */
+#define RCC_CFGR_HPRE_3 ((uint32_t)0x00000080) /*!< Bit 3 */
+
+#define RCC_CFGR_HPRE_DIV1 ((uint32_t)0x00000000) /*!< SYSCLK not divided */
+#define RCC_CFGR_HPRE_DIV2 ((uint32_t)0x00000080) /*!< SYSCLK divided by 2 */
+#define RCC_CFGR_HPRE_DIV4 ((uint32_t)0x00000090) /*!< SYSCLK divided by 4 */
+#define RCC_CFGR_HPRE_DIV8 ((uint32_t)0x000000A0) /*!< SYSCLK divided by 8 */
+#define RCC_CFGR_HPRE_DIV16 ((uint32_t)0x000000B0) /*!< SYSCLK divided by 16 */
+#define RCC_CFGR_HPRE_DIV64 ((uint32_t)0x000000C0) /*!< SYSCLK divided by 64 */
+#define RCC_CFGR_HPRE_DIV128 ((uint32_t)0x000000D0) /*!< SYSCLK divided by 128 */
+#define RCC_CFGR_HPRE_DIV256 ((uint32_t)0x000000E0) /*!< SYSCLK divided by 256 */
+#define RCC_CFGR_HPRE_DIV512 ((uint32_t)0x000000F0) /*!< SYSCLK divided by 512 */
+
+/*!< PPRE1 configuration */
+#define RCC_CFGR_PPRE1 ((uint32_t)0x00001C00) /*!< PRE1[2:0] bits (APB1 prescaler) */
+#define RCC_CFGR_PPRE1_0 ((uint32_t)0x00000400) /*!< Bit 0 */
+#define RCC_CFGR_PPRE1_1 ((uint32_t)0x00000800) /*!< Bit 1 */
+#define RCC_CFGR_PPRE1_2 ((uint32_t)0x00001000) /*!< Bit 2 */
+
+#define RCC_CFGR_PPRE1_DIV1 ((uint32_t)0x00000000) /*!< HCLK not divided */
+#define RCC_CFGR_PPRE1_DIV2 ((uint32_t)0x00001000) /*!< HCLK divided by 2 */
+#define RCC_CFGR_PPRE1_DIV4 ((uint32_t)0x00001400) /*!< HCLK divided by 4 */
+#define RCC_CFGR_PPRE1_DIV8 ((uint32_t)0x00001800) /*!< HCLK divided by 8 */
+#define RCC_CFGR_PPRE1_DIV16 ((uint32_t)0x00001C00) /*!< HCLK divided by 16 */
+
+/*!< PPRE2 configuration */
+#define RCC_CFGR_PPRE2 ((uint32_t)0x0000E000) /*!< PRE2[2:0] bits (APB2 prescaler) */
+#define RCC_CFGR_PPRE2_0 ((uint32_t)0x00002000) /*!< Bit 0 */
+#define RCC_CFGR_PPRE2_1 ((uint32_t)0x00004000) /*!< Bit 1 */
+#define RCC_CFGR_PPRE2_2 ((uint32_t)0x00008000) /*!< Bit 2 */
+
+#define RCC_CFGR_PPRE2_DIV1 ((uint32_t)0x00000000) /*!< HCLK not divided */
+#define RCC_CFGR_PPRE2_DIV2 ((uint32_t)0x00008000) /*!< HCLK divided by 2 */
+#define RCC_CFGR_PPRE2_DIV4 ((uint32_t)0x0000A000) /*!< HCLK divided by 4 */
+#define RCC_CFGR_PPRE2_DIV8 ((uint32_t)0x0000C000) /*!< HCLK divided by 8 */
+#define RCC_CFGR_PPRE2_DIV16 ((uint32_t)0x0000E00) /*!< HCLK divided by 16 */
+
+/*!< RTCPRE configuration */
+#define RCC_CFGR_RTCPRE ((uint32_t)0x001F0000)
+#define RCC_CFGR_RTCPRE_0 ((uint32_t)0x00010000)
+#define RCC_CFGR_RTCPRE_1 ((uint32_t)0x00020000)
+#define RCC_CFGR_RTCPRE_2 ((uint32_t)0x00040000)
+#define RCC_CFGR_RTCPRE_3 ((uint32_t)0x00080000)
+#define RCC_CFGR_RTCPRE_4 ((uint32_t)0x00100000)
+
+/*!< MCO1 configuration */
+#define RCC_CFGR_MCO1 ((uint32_t)0x00600000)
+#define RCC_CFGR_MCO1_0 ((uint32_t)0x00200000)
+#define RCC_CFGR_MCO1_1 ((uint32_t)0x00400000)
+
+#define RCC_CFGR_I2SSRC ((uint32_t)0x00800000)
+
+#define RCC_CFGR_MCO1PRE ((uint32_t)0x07000000)
+#define RCC_CFGR_MCO1PRE_0 ((uint32_t)0x01000000)
+#define RCC_CFGR_MCO1PRE_1 ((uint32_t)0x02000000)
+#define RCC_CFGR_MCO1PRE_2 ((uint32_t)0x04000000)
+
+#define RCC_CFGR_MCO2PRE ((uint32_t)0x38000000)
+#define RCC_CFGR_MCO2PRE_0 ((uint32_t)0x08000000)
+#define RCC_CFGR_MCO2PRE_1 ((uint32_t)0x10000000)
+#define RCC_CFGR_MCO2PRE_2 ((uint32_t)0x20000000)
+
+#define RCC_CFGR_MCO2 ((uint32_t)0xC0000000)
+#define RCC_CFGR_MCO2_0 ((uint32_t)0x40000000)
+#define RCC_CFGR_MCO2_1 ((uint32_t)0x80000000)
+
+/******************** Bit definition for RCC_CIR register *******************/
+#define RCC_CIR_LSIRDYF ((uint32_t)0x00000001)
+#define RCC_CIR_LSERDYF ((uint32_t)0x00000002)
+#define RCC_CIR_HSIRDYF ((uint32_t)0x00000004)
+#define RCC_CIR_HSERDYF ((uint32_t)0x00000008)
+#define RCC_CIR_PLLRDYF ((uint32_t)0x00000010)
+#define RCC_CIR_PLLI2SRDYF ((uint32_t)0x00000020)
+#define RCC_CIR_CSSF ((uint32_t)0x00000080)
+#define RCC_CIR_LSIRDYIE ((uint32_t)0x00000100)
+#define RCC_CIR_LSERDYIE ((uint32_t)0x00000200)
+#define RCC_CIR_HSIRDYIE ((uint32_t)0x00000400)
+#define RCC_CIR_HSERDYIE ((uint32_t)0x00000800)
+#define RCC_CIR_PLLRDYIE ((uint32_t)0x00001000)
+#define RCC_CIR_PLLI2SRDYIE ((uint32_t)0x00002000)
+#define RCC_CIR_LSIRDYC ((uint32_t)0x00010000)
+#define RCC_CIR_LSERDYC ((uint32_t)0x00020000)
+#define RCC_CIR_HSIRDYC ((uint32_t)0x00040000)
+#define RCC_CIR_HSERDYC ((uint32_t)0x00080000)
+#define RCC_CIR_PLLRDYC ((uint32_t)0x00100000)
+#define RCC_CIR_PLLI2SRDYC ((uint32_t)0x00200000)
+#define RCC_CIR_CSSC ((uint32_t)0x00800000)
+
+/******************** Bit definition for RCC_AHB1RSTR register **************/
+#define RCC_AHB1RSTR_GPIOARST ((uint32_t)0x00000001)
+#define RCC_AHB1RSTR_GPIOBRST ((uint32_t)0x00000002)
+#define RCC_AHB1RSTR_GPIOCRST ((uint32_t)0x00000004)
+#define RCC_AHB1RSTR_GPIODRST ((uint32_t)0x00000008)
+#define RCC_AHB1RSTR_GPIOERST ((uint32_t)0x00000010)
+#define RCC_AHB1RSTR_GPIOFRST ((uint32_t)0x00000020)
+#define RCC_AHB1RSTR_GPIOGRST ((uint32_t)0x00000040)
+#define RCC_AHB1RSTR_GPIOHRST ((uint32_t)0x00000080)
+#define RCC_AHB1RSTR_GPIOIRST ((uint32_t)0x00000100)
+#define RCC_AHB1RSTR_CRCRST ((uint32_t)0x00001000)
+#define RCC_AHB1RSTR_DMA1RST ((uint32_t)0x00200000)
+#define RCC_AHB1RSTR_DMA2RST ((uint32_t)0x00400000)
+#define RCC_AHB1RSTR_ETHMACRST ((uint32_t)0x02000000)
+#define RCC_AHB1RSTR_OTGHRST ((uint32_t)0x10000000)
+
+/******************** Bit definition for RCC_AHB2RSTR register **************/
+#define RCC_AHB2RSTR_DCMIRST ((uint32_t)0x00000001)
+#define RCC_AHB2RSTR_CRYPRST ((uint32_t)0x00000010)
+#define RCC_AHB2RSTR_HSAHRST ((uint32_t)0x00000020)
+#define RCC_AHB2RSTR_RNGRST ((uint32_t)0x00000040)
+#define RCC_AHB2RSTR_OTGFSRST ((uint32_t)0x00000080)
+
+/******************** Bit definition for RCC_AHB3RSTR register **************/
+#define RCC_AHB3RSTR_FSMCRST ((uint32_t)0x00000001)
+
+/******************** Bit definition for RCC_APB1RSTR register **************/
+#define RCC_APB1RSTR_TIM2RST ((uint32_t)0x00000001)
+#define RCC_APB1RSTR_TIM3RST ((uint32_t)0x00000002)
+#define RCC_APB1RSTR_TIM4RST ((uint32_t)0x00000004)
+#define RCC_APB1RSTR_TIM5RST ((uint32_t)0x00000008)
+#define RCC_APB1RSTR_TIM6RST ((uint32_t)0x00000010)
+#define RCC_APB1RSTR_TIM7RST ((uint32_t)0x00000020)
+#define RCC_APB1RSTR_TIM12RST ((uint32_t)0x00000040)
+#define RCC_APB1RSTR_TIM13RST ((uint32_t)0x00000080)
+#define RCC_APB1RSTR_TIM14RST ((uint32_t)0x00000100)
+#define RCC_APB1RSTR_WWDGEN ((uint32_t)0x00000800)
+#define RCC_APB1RSTR_SPI2RST ((uint32_t)0x00008000)
+#define RCC_APB1RSTR_SPI3RST ((uint32_t)0x00010000)
+#define RCC_APB1RSTR_USART2RST ((uint32_t)0x00020000)
+#define RCC_APB1RSTR_USART3RST ((uint32_t)0x00040000)
+#define RCC_APB1RSTR_UART4RST ((uint32_t)0x00080000)
+#define RCC_APB1RSTR_UART5RST ((uint32_t)0x00100000)
+#define RCC_APB1RSTR_I2C1RST ((uint32_t)0x00200000)
+#define RCC_APB1RSTR_I2C2RST ((uint32_t)0x00400000)
+#define RCC_APB1RSTR_I2C3RST ((uint32_t)0x00800000)
+#define RCC_APB1RSTR_CAN1RST ((uint32_t)0x02000000)
+#define RCC_APB1RSTR_CAN2RST ((uint32_t)0x04000000)
+#define RCC_APB1RSTR_PWRRST ((uint32_t)0x10000000)
+#define RCC_APB1RSTR_DACRST ((uint32_t)0x20000000)
+
+/******************** Bit definition for RCC_APB2RSTR register **************/
+#define RCC_APB2RSTR_TIM1RST ((uint32_t)0x00000001)
+#define RCC_APB2RSTR_TIM8RST ((uint32_t)0x00000002)
+#define RCC_APB2RSTR_USART1RST ((uint32_t)0x00000010)
+#define RCC_APB2RSTR_USART6RST ((uint32_t)0x00000020)
+#define RCC_APB2RSTR_ADCRST ((uint32_t)0x00000100)
+#define RCC_APB2RSTR_SDIORST ((uint32_t)0x00000800)
+#define RCC_APB2RSTR_SPI1 ((uint32_t)0x00001000)
+#define RCC_APB2RSTR_SYSCFGRST ((uint32_t)0x00004000)
+#define RCC_APB2RSTR_TIM9RST ((uint32_t)0x00010000)
+#define RCC_APB2RSTR_TIM10RST ((uint32_t)0x00020000)
+#define RCC_APB2RSTR_TIM11RST ((uint32_t)0x00040000)
+
+/******************** Bit definition for RCC_AHB1ENR register ***************/
+#define RCC_AHB1ENR_GPIOAEN ((uint32_t)0x00000001)
+#define RCC_AHB1ENR_GPIOBEN ((uint32_t)0x00000002)
+#define RCC_AHB1ENR_GPIOCEN ((uint32_t)0x00000004)
+#define RCC_AHB1ENR_GPIODEN ((uint32_t)0x00000008)
+#define RCC_AHB1ENR_GPIOEEN ((uint32_t)0x00000010)
+#define RCC_AHB1ENR_GPIOFEN ((uint32_t)0x00000020)
+#define RCC_AHB1ENR_GPIOGEN ((uint32_t)0x00000040)
+#define RCC_AHB1ENR_GPIOHEN ((uint32_t)0x00000080)
+#define RCC_AHB1ENR_GPIOIEN ((uint32_t)0x00000100)
+#define RCC_AHB1ENR_CRCEN ((uint32_t)0x00001000)
+#define RCC_AHB1ENR_BKPSRAMEN ((uint32_t)0x00040000)
+#define RCC_AHB1ENR_DMA1EN ((uint32_t)0x00200000)
+#define RCC_AHB1ENR_DMA2EN ((uint32_t)0x00400000)
+#define RCC_AHB1ENR_ETHMACEN ((uint32_t)0x02000000)
+#define RCC_AHB1ENR_ETHMACTXEN ((uint32_t)0x04000000)
+#define RCC_AHB1ENR_ETHMACRXEN ((uint32_t)0x08000000)
+#define RCC_AHB1ENR_ETHMACPTPEN ((uint32_t)0x10000000)
+#define RCC_AHB1ENR_OTGHSEN ((uint32_t)0x20000000)
+#define RCC_AHB1ENR_OTGHSULPIEN ((uint32_t)0x40000000)
+
+/******************** Bit definition for RCC_AHB2ENR register ***************/
+#define RCC_AHB2ENR_DCMIEN ((uint32_t)0x00000001)
+#define RCC_AHB2ENR_CRYPEN ((uint32_t)0x00000010)
+#define RCC_AHB2ENR_HASHEN ((uint32_t)0x00000020)
+#define RCC_AHB2ENR_RNGEN ((uint32_t)0x00000040)
+#define RCC_AHB2ENR_OTGFSEN ((uint32_t)0x00000080)
+
+/******************** Bit definition for RCC_AHB3ENR register ***************/
+#define RCC_AHB3ENR_FSMCEN ((uint32_t)0x00000001)
+
+/******************** Bit definition for RCC_APB1ENR register ***************/
+#define RCC_APB1ENR_TIM2EN ((uint32_t)0x00000001)
+#define RCC_APB1ENR_TIM3EN ((uint32_t)0x00000002)
+#define RCC_APB1ENR_TIM4EN ((uint32_t)0x00000004)
+#define RCC_APB1ENR_TIM5EN ((uint32_t)0x00000008)
+#define RCC_APB1ENR_TIM6EN ((uint32_t)0x00000010)
+#define RCC_APB1ENR_TIM7EN ((uint32_t)0x00000020)
+#define RCC_APB1ENR_TIM12EN ((uint32_t)0x00000040)
+#define RCC_APB1ENR_TIM13EN ((uint32_t)0x00000080)
+#define RCC_APB1ENR_TIM14EN ((uint32_t)0x00000100)
+#define RCC_APB1ENR_WWDGEN ((uint32_t)0x00000800)
+#define RCC_APB1ENR_SPI2EN ((uint32_t)0x00004000)
+#define RCC_APB1ENR_SPI3EN ((uint32_t)0x00008000)
+#define RCC_APB1ENR_USART2EN ((uint32_t)0x00020000)
+#define RCC_APB1ENR_USART3EN ((uint32_t)0x00040000)
+#define RCC_APB1ENR_UART4EN ((uint32_t)0x00080000)
+#define RCC_APB1ENR_UART5EN ((uint32_t)0x00100000)
+#define RCC_APB1ENR_I2C1EN ((uint32_t)0x00200000)
+#define RCC_APB1ENR_I2C2EN ((uint32_t)0x00400000)
+#define RCC_APB1ENR_I2C3EN ((uint32_t)0x00800000)
+#define RCC_APB1ENR_CAN1EN ((uint32_t)0x02000000)
+#define RCC_APB1ENR_CAN2EN ((uint32_t)0x04000000)
+#define RCC_APB1ENR_PWREN ((uint32_t)0x10000000)
+#define RCC_APB1ENR_DACEN ((uint32_t)0x20000000)
+
+/******************** Bit definition for RCC_APB2ENR register ***************/
+#define RCC_APB2ENR_TIM1EN ((uint32_t)0x00000001)
+#define RCC_APB2ENR_TIM8EN ((uint32_t)0x00000002)
+#define RCC_APB2ENR_USART1EN ((uint32_t)0x00000010)
+#define RCC_APB2ENR_USART6EN ((uint32_t)0x00000020)
+#define RCC_APB2ENR_ADC1EN ((uint32_t)0x00000100)
+#define RCC_APB2ENR_ADC2EN ((uint32_t)0x00000200)
+#define RCC_APB2ENR_ADC3EN ((uint32_t)0x00000400)
+#define RCC_APB2ENR_SDIOEN ((uint32_t)0x00000800)
+#define RCC_APB2ENR_SPI1EN ((uint32_t)0x00001000)
+#define RCC_APB2ENR_SYSCFGEN ((uint32_t)0x00004000)
+#define RCC_APB2ENR_TIM11EN ((uint32_t)0x00040000)
+#define RCC_APB2ENR_TIM10EN ((uint32_t)0x00020000)
+#define RCC_APB2ENR_TIM9EN ((uint32_t)0x00010000)
+
+/******************** Bit definition for RCC_AHB1LPENR register *************/
+#define RCC_AHB1LPENR_GPIOALPEN ((uint32_t)0x00000001)
+#define RCC_AHB1LPENR_GPIOBLPEN ((uint32_t)0x00000002)
+#define RCC_AHB1LPENR_GPIOCLPEN ((uint32_t)0x00000004)
+#define RCC_AHB1LPENR_GPIODLPEN ((uint32_t)0x00000008)
+#define RCC_AHB1LPENR_GPIOELPEN ((uint32_t)0x00000010)
+#define RCC_AHB1LPENR_GPIOFLPEN ((uint32_t)0x00000020)
+#define RCC_AHB1LPENR_GPIOGLPEN ((uint32_t)0x00000040)
+#define RCC_AHB1LPENR_GPIOHLPEN ((uint32_t)0x00000080)
+#define RCC_AHB1LPENR_GPIOILPEN ((uint32_t)0x00000100)
+#define RCC_AHB1LPENR_CRCLPEN ((uint32_t)0x00001000)
+#define RCC_AHB1LPENR_FLITFLPEN ((uint32_t)0x00008000)
+#define RCC_AHB1LPENR_SRAM1LPEN ((uint32_t)0x00010000)
+#define RCC_AHB1LPENR_SRAM2LPEN ((uint32_t)0x00020000)
+#define RCC_AHB1LPENR_BKPSRAMLPEN ((uint32_t)0x00040000)
+#define RCC_AHB1LPENR_DMA1LPEN ((uint32_t)0x00200000)
+#define RCC_AHB1LPENR_DMA2LPEN ((uint32_t)0x00400000)
+#define RCC_AHB1LPENR_ETHMACLPEN ((uint32_t)0x02000000)
+#define RCC_AHB1LPENR_ETHMACTXLPEN ((uint32_t)0x04000000)
+#define RCC_AHB1LPENR_ETHMACRXLPEN ((uint32_t)0x08000000)
+#define RCC_AHB1LPENR_ETHMACPTPLPEN ((uint32_t)0x10000000)
+#define RCC_AHB1LPENR_OTGHSLPEN ((uint32_t)0x20000000)
+#define RCC_AHB1LPENR_OTGHSULPILPEN ((uint32_t)0x40000000)
+
+/******************** Bit definition for RCC_AHB2LPENR register *************/
+#define RCC_AHB2LPENR_DCMILPEN ((uint32_t)0x00000001)
+#define RCC_AHB2LPENR_CRYPLPEN ((uint32_t)0x00000010)
+#define RCC_AHB2LPENR_HASHLPEN ((uint32_t)0x00000020)
+#define RCC_AHB2LPENR_RNGLPEN ((uint32_t)0x00000040)
+#define RCC_AHB2LPENR_OTGFSLPEN ((uint32_t)0x00000080)
+
+/******************** Bit definition for RCC_AHB3LPENR register *************/
+#define RCC_AHB3LPENR_FSMCLPEN ((uint32_t)0x00000001)
+
+/******************** Bit definition for RCC_APB1LPENR register *************/
+#define RCC_APB1LPENR_TIM2LPEN ((uint32_t)0x00000001)
+#define RCC_APB1LPENR_TIM3LPEN ((uint32_t)0x00000002)
+#define RCC_APB1LPENR_TIM4LPEN ((uint32_t)0x00000004)
+#define RCC_APB1LPENR_TIM5LPEN ((uint32_t)0x00000008)
+#define RCC_APB1LPENR_TIM6LPEN ((uint32_t)0x00000010)
+#define RCC_APB1LPENR_TIM7LPEN ((uint32_t)0x00000020)
+#define RCC_APB1LPENR_TIM12LPEN ((uint32_t)0x00000040)
+#define RCC_APB1LPENR_TIM13LPEN ((uint32_t)0x00000080)
+#define RCC_APB1LPENR_TIM14LPEN ((uint32_t)0x00000100)
+#define RCC_APB1LPENR_WWDGLPEN ((uint32_t)0x00000800)
+#define RCC_APB1LPENR_SPI2LPEN ((uint32_t)0x00004000)
+#define RCC_APB1LPENR_SPI3LPEN ((uint32_t)0x00008000)
+#define RCC_APB1LPENR_USART2LPEN ((uint32_t)0x00020000)
+#define RCC_APB1LPENR_USART3LPEN ((uint32_t)0x00040000)
+#define RCC_APB1LPENR_UART4LPEN ((uint32_t)0x00080000)
+#define RCC_APB1LPENR_UART5LPEN ((uint32_t)0x00100000)
+#define RCC_APB1LPENR_I2C1LPEN ((uint32_t)0x00200000)
+#define RCC_APB1LPENR_I2C2LPEN ((uint32_t)0x00400000)
+#define RCC_APB1LPENR_I2C3LPEN ((uint32_t)0x00800000)
+#define RCC_APB1LPENR_CAN1LPEN ((uint32_t)0x02000000)
+#define RCC_APB1LPENR_CAN2LPEN ((uint32_t)0x04000000)
+#define RCC_APB1LPENR_PWRLPEN ((uint32_t)0x10000000)
+#define RCC_APB1LPENR_DACLPEN ((uint32_t)0x20000000)
+
+/******************** Bit definition for RCC_APB2LPENR register *************/
+#define RCC_APB2LPENR_TIM1LPEN ((uint32_t)0x00000001)
+#define RCC_APB2LPENR_TIM8LPEN ((uint32_t)0x00000002)
+#define RCC_APB2LPENR_USART1LPEN ((uint32_t)0x00000010)
+#define RCC_APB2LPENR_USART6LPEN ((uint32_t)0x00000020)
+#define RCC_APB2LPENR_ADC1LPEN ((uint32_t)0x00000100)
+#define RCC_APB2LPENR_ADC2PEN ((uint32_t)0x00000200)
+#define RCC_APB2LPENR_ADC3LPEN ((uint32_t)0x00000400)
+#define RCC_APB2LPENR_SDIOLPEN ((uint32_t)0x00000800)
+#define RCC_APB2LPENR_SPI1LPEN ((uint32_t)0x00001000)
+#define RCC_APB2LPENR_SYSCFGLPEN ((uint32_t)0x00004000)
+#define RCC_APB2LPENR_TIM9LPEN ((uint32_t)0x00010000)
+#define RCC_APB2LPENR_TIM10LPEN ((uint32_t)0x00020000)
+#define RCC_APB2LPENR_TIM11LPEN ((uint32_t)0x00040000)
+
+/******************** Bit definition for RCC_BDCR register ******************/
+#define RCC_BDCR_LSEON ((uint32_t)0x00000001)
+#define RCC_BDCR_LSERDY ((uint32_t)0x00000002)
+#define RCC_BDCR_LSEBYP ((uint32_t)0x00000004)
+
+#define RCC_BDCR_RTCSEL ((uint32_t)0x00000300)
+#define RCC_BDCR_RTCSEL_0 ((uint32_t)0x00000100)
+#define RCC_BDCR_RTCSEL_1 ((uint32_t)0x00000200)
+
+#define RCC_BDCR_RTCEN ((uint32_t)0x00008000)
+#define RCC_BDCR_BDRST ((uint32_t)0x00010000)
+
+/******************** Bit definition for RCC_CSR register *******************/
+#define RCC_CSR_LSION ((uint32_t)0x00000001)
+#define RCC_CSR_LSIRDY ((uint32_t)0x00000002)
+#define RCC_CSR_RMVF ((uint32_t)0x01000000)
+#define RCC_CSR_BORRSTF ((uint32_t)0x02000000)
+#define RCC_CSR_PADRSTF ((uint32_t)0x04000000)
+#define RCC_CSR_PORRSTF ((uint32_t)0x08000000)
+#define RCC_CSR_SFTRSTF ((uint32_t)0x10000000)
+#define RCC_CSR_WDGRSTF ((uint32_t)0x20000000)
+#define RCC_CSR_WWDGRSTF ((uint32_t)0x40000000)
+#define RCC_CSR_LPWRRSTF ((uint32_t)0x80000000)
+
+/******************** Bit definition for RCC_SSCGR register *****************/
+#define RCC_SSCGR_MODPER ((uint32_t)0x00001FFF)
+#define RCC_SSCGR_INCSTEP ((uint32_t)0x0FFFE000)
+#define RCC_SSCGR_SPREADSEL ((uint32_t)0x40000000)
+#define RCC_SSCGR_SSCGEN ((uint32_t)0x80000000)
+
+/******************** Bit definition for RCC_PLLI2SCFGR register ************/
+#define RCC_PLLI2SCFGR_PLLI2SN ((uint32_t)0x00007FC0)
+#define RCC_PLLI2SCFGR_PLLI2SR ((uint32_t)0x70000000)
+
+/******************************************************************************/
+/* */
+/* RNG */
+/* */
+/******************************************************************************/
+/******************** Bits definition for RNG_CR register *******************/
+#define RNG_CR_RNGEN ((uint32_t)0x00000004)
+#define RNG_CR_IE ((uint32_t)0x00000008)
+
+/******************** Bits definition for RNG_SR register *******************/
+#define RNG_SR_DRDY ((uint32_t)0x00000001)
+#define RNG_SR_CECS ((uint32_t)0x00000002)
+#define RNG_SR_SECS ((uint32_t)0x00000004)
+#define RNG_SR_CEIS ((uint32_t)0x00000020)
+#define RNG_SR_SEIS ((uint32_t)0x00000040)
+
+/******************************************************************************/
+/* */
+/* Real-Time Clock (RTC) */
+/* */
+/******************************************************************************/
+/******************** Bits definition for RTC_TR register *******************/
+#define RTC_TR_PM ((uint32_t)0x00400000)
+#define RTC_TR_HT ((uint32_t)0x00300000)
+#define RTC_TR_HT_0 ((uint32_t)0x00100000)
+#define RTC_TR_HT_1 ((uint32_t)0x00200000)
+#define RTC_TR_HU ((uint32_t)0x000F0000)
+#define RTC_TR_HU_0 ((uint32_t)0x00010000)
+#define RTC_TR_HU_1 ((uint32_t)0x00020000)
+#define RTC_TR_HU_2 ((uint32_t)0x00040000)
+#define RTC_TR_HU_3 ((uint32_t)0x00080000)
+#define RTC_TR_MNT ((uint32_t)0x00007000)
+#define RTC_TR_MNT_0 ((uint32_t)0x00001000)
+#define RTC_TR_MNT_1 ((uint32_t)0x00002000)
+#define RTC_TR_MNT_2 ((uint32_t)0x00004000)
+#define RTC_TR_MNU ((uint32_t)0x00000F00)
+#define RTC_TR_MNU_0 ((uint32_t)0x00000100)
+#define RTC_TR_MNU_1 ((uint32_t)0x00000200)
+#define RTC_TR_MNU_2 ((uint32_t)0x00000400)
+#define RTC_TR_MNU_3 ((uint32_t)0x00000800)
+#define RTC_TR_ST ((uint32_t)0x00000070)
+#define RTC_TR_ST_0 ((uint32_t)0x00000010)
+#define RTC_TR_ST_1 ((uint32_t)0x00000020)
+#define RTC_TR_ST_2 ((uint32_t)0x00000040)
+#define RTC_TR_SU ((uint32_t)0x0000000F)
+#define RTC_TR_SU_0 ((uint32_t)0x00000001)
+#define RTC_TR_SU_1 ((uint32_t)0x00000002)
+#define RTC_TR_SU_2 ((uint32_t)0x00000004)
+#define RTC_TR_SU_3 ((uint32_t)0x00000008)
+
+/******************** Bits definition for RTC_DR register *******************/
+#define RTC_DR_YT ((uint32_t)0x00F00000)
+#define RTC_DR_YT_0 ((uint32_t)0x00100000)
+#define RTC_DR_YT_1 ((uint32_t)0x00200000)
+#define RTC_DR_YT_2 ((uint32_t)0x00400000)
+#define RTC_DR_YT_3 ((uint32_t)0x00800000)
+#define RTC_DR_YU ((uint32_t)0x000F0000)
+#define RTC_DR_YU_0 ((uint32_t)0x00010000)
+#define RTC_DR_YU_1 ((uint32_t)0x00020000)
+#define RTC_DR_YU_2 ((uint32_t)0x00040000)
+#define RTC_DR_YU_3 ((uint32_t)0x00080000)
+#define RTC_DR_WDU ((uint32_t)0x0000E000)
+#define RTC_DR_WDU_0 ((uint32_t)0x00002000)
+#define RTC_DR_WDU_1 ((uint32_t)0x00004000)
+#define RTC_DR_WDU_2 ((uint32_t)0x00008000)
+#define RTC_DR_MT ((uint32_t)0x00001000)
+#define RTC_DR_MU ((uint32_t)0x00000F00)
+#define RTC_DR_MU_0 ((uint32_t)0x00000100)
+#define RTC_DR_MU_1 ((uint32_t)0x00000200)
+#define RTC_DR_MU_2 ((uint32_t)0x00000400)
+#define RTC_DR_MU_3 ((uint32_t)0x00000800)
+#define RTC_DR_DT ((uint32_t)0x00000030)
+#define RTC_DR_DT_0 ((uint32_t)0x00000010)
+#define RTC_DR_DT_1 ((uint32_t)0x00000020)
+#define RTC_DR_DU ((uint32_t)0x0000000F)
+#define RTC_DR_DU_0 ((uint32_t)0x00000001)
+#define RTC_DR_DU_1 ((uint32_t)0x00000002)
+#define RTC_DR_DU_2 ((uint32_t)0x00000004)
+#define RTC_DR_DU_3 ((uint32_t)0x00000008)
+
+/******************** Bits definition for RTC_CR register *******************/
+#define RTC_CR_COE ((uint32_t)0x00800000)
+#define RTC_CR_OSEL ((uint32_t)0x00600000)
+#define RTC_CR_OSEL_0 ((uint32_t)0x00200000)
+#define RTC_CR_OSEL_1 ((uint32_t)0x00400000)
+#define RTC_CR_POL ((uint32_t)0x00100000)
+#define RTC_CR_BCK ((uint32_t)0x00040000)
+#define RTC_CR_SUB1H ((uint32_t)0x00020000)
+#define RTC_CR_ADD1H ((uint32_t)0x00010000)
+#define RTC_CR_TSIE ((uint32_t)0x00008000)
+#define RTC_CR_WUTIE ((uint32_t)0x00004000)
+#define RTC_CR_ALRBIE ((uint32_t)0x00002000)
+#define RTC_CR_ALRAIE ((uint32_t)0x00001000)
+#define RTC_CR_TSE ((uint32_t)0x00000800)
+#define RTC_CR_WUTE ((uint32_t)0x00000400)
+#define RTC_CR_ALRBE ((uint32_t)0x00000200)
+#define RTC_CR_ALRAE ((uint32_t)0x00000100)
+#define RTC_CR_DCE ((uint32_t)0x00000080)
+#define RTC_CR_FMT ((uint32_t)0x00000040)
+#define RTC_CR_REFCKON ((uint32_t)0x00000010)
+#define RTC_CR_TSEDGE ((uint32_t)0x00000008)
+#define RTC_CR_WUCKSEL ((uint32_t)0x00000007)
+#define RTC_CR_WUCKSEL_0 ((uint32_t)0x00000001)
+#define RTC_CR_WUCKSEL_1 ((uint32_t)0x00000002)
+#define RTC_CR_WUCKSEL_2 ((uint32_t)0x00000004)
+
+/******************** Bits definition for RTC_ISR register ******************/
+#define RTC_ISR_TAMP1F ((uint32_t)0x00002000)
+#define RTC_ISR_TSOVF ((uint32_t)0x00001000)
+#define RTC_ISR_TSF ((uint32_t)0x00000800)
+#define RTC_ISR_WUTF ((uint32_t)0x00000400)
+#define RTC_ISR_ALRBF ((uint32_t)0x00000200)
+#define RTC_ISR_ALRAF ((uint32_t)0x00000100)
+#define RTC_ISR_INIT ((uint32_t)0x00000080)
+#define RTC_ISR_INITF ((uint32_t)0x00000040)
+#define RTC_ISR_RSF ((uint32_t)0x00000020)
+#define RTC_ISR_INITS ((uint32_t)0x00000010)
+#define RTC_ISR_WUTWF ((uint32_t)0x00000004)
+#define RTC_ISR_ALRBWF ((uint32_t)0x00000002)
+#define RTC_ISR_ALRAWF ((uint32_t)0x00000001)
+
+/******************** Bits definition for RTC_PRER register *****************/
+#define RTC_PRER_PREDIV_A ((uint32_t)0x007F0000)
+#define RTC_PRER_PREDIV_S ((uint32_t)0x00001FFF)
+
+/******************** Bits definition for RTC_WUTR register *****************/
+#define RTC_WUTR_WUT ((uint32_t)0x0000FFFF)
+
+/******************** Bits definition for RTC_CALIBR register ***************/
+#define RTC_CALIBR_DCS ((uint32_t)0x00000080)
+#define RTC_CALIBR_DC ((uint32_t)0x0000001F)
+
+/******************** Bits definition for RTC_ALRMAR register ***************/
+#define RTC_ALRMAR_MSK4 ((uint32_t)0x80000000)
+#define RTC_ALRMAR_WDSEL ((uint32_t)0x40000000)
+#define RTC_ALRMAR_DT ((uint32_t)0x30000000)
+#define RTC_ALRMAR_DT_0 ((uint32_t)0x10000000)
+#define RTC_ALRMAR_DT_1 ((uint32_t)0x20000000)
+#define RTC_ALRMAR_DU ((uint32_t)0x0F000000)
+#define RTC_ALRMAR_DU_0 ((uint32_t)0x01000000)
+#define RTC_ALRMAR_DU_1 ((uint32_t)0x02000000)
+#define RTC_ALRMAR_DU_2 ((uint32_t)0x04000000)
+#define RTC_ALRMAR_DU_3 ((uint32_t)0x08000000)
+#define RTC_ALRMAR_MSK3 ((uint32_t)0x00800000)
+#define RTC_ALRMAR_PM ((uint32_t)0x00400000)
+#define RTC_ALRMAR_HT ((uint32_t)0x00300000)
+#define RTC_ALRMAR_HT_0 ((uint32_t)0x00100000)
+#define RTC_ALRMAR_HT_1 ((uint32_t)0x00200000)
+#define RTC_ALRMAR_HU ((uint32_t)0x000F0000)
+#define RTC_ALRMAR_HU_0 ((uint32_t)0x00010000)
+#define RTC_ALRMAR_HU_1 ((uint32_t)0x00020000)
+#define RTC_ALRMAR_HU_2 ((uint32_t)0x00040000)
+#define RTC_ALRMAR_HU_3 ((uint32_t)0x00080000)
+#define RTC_ALRMAR_MSK2 ((uint32_t)0x00008000)
+#define RTC_ALRMAR_MNT ((uint32_t)0x00007000)
+#define RTC_ALRMAR_MNT_0 ((uint32_t)0x00001000)
+#define RTC_ALRMAR_MNT_1 ((uint32_t)0x00002000)
+#define RTC_ALRMAR_MNT_2 ((uint32_t)0x00004000)
+#define RTC_ALRMAR_MNU ((uint32_t)0x00000F00)
+#define RTC_ALRMAR_MNU_0 ((uint32_t)0x00000100)
+#define RTC_ALRMAR_MNU_1 ((uint32_t)0x00000200)
+#define RTC_ALRMAR_MNU_2 ((uint32_t)0x00000400)
+#define RTC_ALRMAR_MNU_3 ((uint32_t)0x00000800)
+#define RTC_ALRMAR_MSK1 ((uint32_t)0x00000080)
+#define RTC_ALRMAR_ST ((uint32_t)0x00000070)
+#define RTC_ALRMAR_ST_0 ((uint32_t)0x00000010)
+#define RTC_ALRMAR_ST_1 ((uint32_t)0x00000020)
+#define RTC_ALRMAR_ST_2 ((uint32_t)0x00000040)
+#define RTC_ALRMAR_SU ((uint32_t)0x0000000F)
+#define RTC_ALRMAR_SU_0 ((uint32_t)0x00000001)
+#define RTC_ALRMAR_SU_1 ((uint32_t)0x00000002)
+#define RTC_ALRMAR_SU_2 ((uint32_t)0x00000004)
+#define RTC_ALRMAR_SU_3 ((uint32_t)0x00000008)
+
+/******************** Bits definition for RTC_ALRMBR register ***************/
+#define RTC_ALRMBR_MSK4 ((uint32_t)0x80000000)
+#define RTC_ALRMBR_WDSEL ((uint32_t)0x40000000)
+#define RTC_ALRMBR_DT ((uint32_t)0x30000000)
+#define RTC_ALRMBR_DT_0 ((uint32_t)0x10000000)
+#define RTC_ALRMBR_DT_1 ((uint32_t)0x20000000)
+#define RTC_ALRMBR_DU ((uint32_t)0x0F000000)
+#define RTC_ALRMBR_DU_0 ((uint32_t)0x01000000)
+#define RTC_ALRMBR_DU_1 ((uint32_t)0x02000000)
+#define RTC_ALRMBR_DU_2 ((uint32_t)0x04000000)
+#define RTC_ALRMBR_DU_3 ((uint32_t)0x08000000)
+#define RTC_ALRMBR_MSK3 ((uint32_t)0x00800000)
+#define RTC_ALRMBR_PM ((uint32_t)0x00400000)
+#define RTC_ALRMBR_HT ((uint32_t)0x00300000)
+#define RTC_ALRMBR_HT_0 ((uint32_t)0x00100000)
+#define RTC_ALRMBR_HT_1 ((uint32_t)0x00200000)
+#define RTC_ALRMBR_HU ((uint32_t)0x000F0000)
+#define RTC_ALRMBR_HU_0 ((uint32_t)0x00010000)
+#define RTC_ALRMBR_HU_1 ((uint32_t)0x00020000)
+#define RTC_ALRMBR_HU_2 ((uint32_t)0x00040000)
+#define RTC_ALRMBR_HU_3 ((uint32_t)0x00080000)
+#define RTC_ALRMBR_MSK2 ((uint32_t)0x00008000)
+#define RTC_ALRMBR_MNT ((uint32_t)0x00007000)
+#define RTC_ALRMBR_MNT_0 ((uint32_t)0x00001000)
+#define RTC_ALRMBR_MNT_1 ((uint32_t)0x00002000)
+#define RTC_ALRMBR_MNT_2 ((uint32_t)0x00004000)
+#define RTC_ALRMBR_MNU ((uint32_t)0x00000F00)
+#define RTC_ALRMBR_MNU_0 ((uint32_t)0x00000100)
+#define RTC_ALRMBR_MNU_1 ((uint32_t)0x00000200)
+#define RTC_ALRMBR_MNU_2 ((uint32_t)0x00000400)
+#define RTC_ALRMBR_MNU_3 ((uint32_t)0x00000800)
+#define RTC_ALRMBR_MSK1 ((uint32_t)0x00000080)
+#define RTC_ALRMBR_ST ((uint32_t)0x00000070)
+#define RTC_ALRMBR_ST_0 ((uint32_t)0x00000010)
+#define RTC_ALRMBR_ST_1 ((uint32_t)0x00000020)
+#define RTC_ALRMBR_ST_2 ((uint32_t)0x00000040)
+#define RTC_ALRMBR_SU ((uint32_t)0x0000000F)
+#define RTC_ALRMBR_SU_0 ((uint32_t)0x00000001)
+#define RTC_ALRMBR_SU_1 ((uint32_t)0x00000002)
+#define RTC_ALRMBR_SU_2 ((uint32_t)0x00000004)
+#define RTC_ALRMBR_SU_3 ((uint32_t)0x00000008)
+
+/******************** Bits definition for RTC_WPR register ******************/
+#define RTC_WPR_KEY ((uint32_t)0x000000FF)
+
+/******************** Bits definition for RTC_TSTR register *****************/
+#define RTC_TSTR_PM ((uint32_t)0x00400000)
+#define RTC_TSTR_HT ((uint32_t)0x00300000)
+#define RTC_TSTR_HT_0 ((uint32_t)0x00100000)
+#define RTC_TSTR_HT_1 ((uint32_t)0x00200000)
+#define RTC_TSTR_HU ((uint32_t)0x000F0000)
+#define RTC_TSTR_HU_0 ((uint32_t)0x00010000)
+#define RTC_TSTR_HU_1 ((uint32_t)0x00020000)
+#define RTC_TSTR_HU_2 ((uint32_t)0x00040000)
+#define RTC_TSTR_HU_3 ((uint32_t)0x00080000)
+#define RTC_TSTR_MNT ((uint32_t)0x00007000)
+#define RTC_TSTR_MNT_0 ((uint32_t)0x00001000)
+#define RTC_TSTR_MNT_1 ((uint32_t)0x00002000)
+#define RTC_TSTR_MNT_2 ((uint32_t)0x00004000)
+#define RTC_TSTR_MNU ((uint32_t)0x00000F00)
+#define RTC_TSTR_MNU_0 ((uint32_t)0x00000100)
+#define RTC_TSTR_MNU_1 ((uint32_t)0x00000200)
+#define RTC_TSTR_MNU_2 ((uint32_t)0x00000400)
+#define RTC_TSTR_MNU_3 ((uint32_t)0x00000800)
+#define RTC_TSTR_ST ((uint32_t)0x00000070)
+#define RTC_TSTR_ST_0 ((uint32_t)0x00000010)
+#define RTC_TSTR_ST_1 ((uint32_t)0x00000020)
+#define RTC_TSTR_ST_2 ((uint32_t)0x00000040)
+#define RTC_TSTR_SU ((uint32_t)0x0000000F)
+#define RTC_TSTR_SU_0 ((uint32_t)0x00000001)
+#define RTC_TSTR_SU_1 ((uint32_t)0x00000002)
+#define RTC_TSTR_SU_2 ((uint32_t)0x00000004)
+#define RTC_TSTR_SU_3 ((uint32_t)0x00000008)
+
+/******************** Bits definition for RTC_TSDR register *****************/
+#define RTC_TSDR_WDU ((uint32_t)0x0000E000)
+#define RTC_TSDR_WDU_0 ((uint32_t)0x00002000)
+#define RTC_TSDR_WDU_1 ((uint32_t)0x00004000)
+#define RTC_TSDR_WDU_2 ((uint32_t)0x00008000)
+#define RTC_TSDR_MT ((uint32_t)0x00001000)
+#define RTC_TSDR_MU ((uint32_t)0x00000F00)
+#define RTC_TSDR_MU_0 ((uint32_t)0x00000100)
+#define RTC_TSDR_MU_1 ((uint32_t)0x00000200)
+#define RTC_TSDR_MU_2 ((uint32_t)0x00000400)
+#define RTC_TSDR_MU_3 ((uint32_t)0x00000800)
+#define RTC_TSDR_DT ((uint32_t)0x00000030)
+#define RTC_TSDR_DT_0 ((uint32_t)0x00000010)
+#define RTC_TSDR_DT_1 ((uint32_t)0x00000020)
+#define RTC_TSDR_DU ((uint32_t)0x0000000F)
+#define RTC_TSDR_DU_0 ((uint32_t)0x00000001)
+#define RTC_TSDR_DU_1 ((uint32_t)0x00000002)
+#define RTC_TSDR_DU_2 ((uint32_t)0x00000004)
+#define RTC_TSDR_DU_3 ((uint32_t)0x00000008)
+
+/******************** Bits definition for RTC_TAFCR register ****************/
+#define RTC_TAFCR_ALARMOUTTYPE ((uint32_t)0x00040000)
+#define RTC_TAFCR_TSINSEL ((uint32_t)0x00020000)
+#define RTC_TAFCR_TAMPINSEL ((uint32_t)0x00010000)
+#define RTC_TAFCR_TAMPIE ((uint32_t)0x00000004)
+#define RTC_TAFCR_TAMP1TRG ((uint32_t)0x00000002)
+#define RTC_TAFCR_TAMP1E ((uint32_t)0x00000001)
+
+/******************** Bits definition for RTC_BKP0R register ****************/
+#define RTC_BKP0R ((uint32_t)0xFFFFFFFF)
+
+/******************** Bits definition for RTC_BKP1R register ****************/
+#define RTC_BKP1R ((uint32_t)0xFFFFFFFF)
+
+/******************** Bits definition for RTC_BKP2R register ****************/
+#define RTC_BKP2R ((uint32_t)0xFFFFFFFF)
+
+/******************** Bits definition for RTC_BKP3R register ****************/
+#define RTC_BKP3R ((uint32_t)0xFFFFFFFF)
+
+/******************** Bits definition for RTC_BKP4R register ****************/
+#define RTC_BKP4R ((uint32_t)0xFFFFFFFF)
+
+/******************** Bits definition for RTC_BKP5R register ****************/
+#define RTC_BKP5R ((uint32_t)0xFFFFFFFF)
+
+/******************** Bits definition for RTC_BKP6R register ****************/
+#define RTC_BKP6R ((uint32_t)0xFFFFFFFF)
+
+/******************** Bits definition for RTC_BKP7R register ****************/
+#define RTC_BKP7R ((uint32_t)0xFFFFFFFF)
+
+/******************** Bits definition for RTC_BKP8R register ****************/
+#define RTC_BKP8R ((uint32_t)0xFFFFFFFF)
+
+/******************** Bits definition for RTC_BKP9R register ****************/
+#define RTC_BKP9R ((uint32_t)0xFFFFFFFF)
+
+/******************** Bits definition for RTC_BKP10R register ***************/
+#define RTC_BKP10R ((uint32_t)0xFFFFFFFF)
+
+/******************** Bits definition for RTC_BKP11R register ***************/
+#define RTC_BKP11R ((uint32_t)0xFFFFFFFF)
+
+/******************** Bits definition for RTC_BKP12R register ***************/
+#define RTC_BKP12R ((uint32_t)0xFFFFFFFF)
+
+/******************** Bits definition for RTC_BKP13R register ***************/
+#define RTC_BKP13R ((uint32_t)0xFFFFFFFF)
+
+/******************** Bits definition for RTC_BKP14R register ***************/
+#define RTC_BKP14R ((uint32_t)0xFFFFFFFF)
+
+/******************** Bits definition for RTC_BKP15R register ***************/
+#define RTC_BKP15R ((uint32_t)0xFFFFFFFF)
+
+/******************** Bits definition for RTC_BKP16R register ***************/
+#define RTC_BKP16R ((uint32_t)0xFFFFFFFF)
+
+/******************** Bits definition for RTC_BKP17R register ***************/
+#define RTC_BKP17R ((uint32_t)0xFFFFFFFF)
+
+/******************** Bits definition for RTC_BKP18R register ***************/
+#define RTC_BKP18R ((uint32_t)0xFFFFFFFF)
+
+/******************** Bits definition for RTC_BKP19R register ***************/
+#define RTC_BKP19R ((uint32_t)0xFFFFFFFF)
+
+/******************************************************************************/
+/* */
+/* SD host Interface */
+/* */
+/******************************************************************************/
+/****************** Bit definition for SDIO_POWER register ******************/
+#define SDIO_POWER_PWRCTRL ((uint8_t)0x03) /*!<PWRCTRL[1:0] bits (Power supply control bits) */
+#define SDIO_POWER_PWRCTRL_0 ((uint8_t)0x01) /*!<Bit 0 */
+#define SDIO_POWER_PWRCTRL_1 ((uint8_t)0x02) /*!<Bit 1 */
+
+/****************** Bit definition for SDIO_CLKCR register ******************/
+#define SDIO_CLKCR_CLKDIV ((uint16_t)0x00FF) /*!<Clock divide factor */
+#define SDIO_CLKCR_CLKEN ((uint16_t)0x0100) /*!<Clock enable bit */
+#define SDIO_CLKCR_PWRSAV ((uint16_t)0x0200) /*!<Power saving configuration bit */
+#define SDIO_CLKCR_BYPASS ((uint16_t)0x0400) /*!<Clock divider bypass enable bit */
+
+#define SDIO_CLKCR_WIDBUS ((uint16_t)0x1800) /*!<WIDBUS[1:0] bits (Wide bus mode enable bit) */
+#define SDIO_CLKCR_WIDBUS_0 ((uint16_t)0x0800) /*!<Bit 0 */
+#define SDIO_CLKCR_WIDBUS_1 ((uint16_t)0x1000) /*!<Bit 1 */
+
+#define SDIO_CLKCR_NEGEDGE ((uint16_t)0x2000) /*!<SDIO_CK dephasing selection bit */
+#define SDIO_CLKCR_HWFC_EN ((uint16_t)0x4000) /*!<HW Flow Control enable */
+
+/******************* Bit definition for SDIO_ARG register *******************/
+#define SDIO_ARG_CMDARG ((uint32_t)0xFFFFFFFF) /*!<Command argument */
+
+/******************* Bit definition for SDIO_CMD register *******************/
+#define SDIO_CMD_CMDINDEX ((uint16_t)0x003F) /*!<Command Index */
+
+#define SDIO_CMD_WAITRESP ((uint16_t)0x00C0) /*!<WAITRESP[1:0] bits (Wait for response bits) */
+#define SDIO_CMD_WAITRESP_0 ((uint16_t)0x0040) /*!< Bit 0 */
+#define SDIO_CMD_WAITRESP_1 ((uint16_t)0x0080) /*!< Bit 1 */
+
+#define SDIO_CMD_WAITINT ((uint16_t)0x0100) /*!<CPSM Waits for Interrupt Request */
+#define SDIO_CMD_WAITPEND ((uint16_t)0x0200) /*!<CPSM Waits for ends of data transfer (CmdPend internal signal) */
+#define SDIO_CMD_CPSMEN ((uint16_t)0x0400) /*!<Command path state machine (CPSM) Enable bit */
+#define SDIO_CMD_SDIOSUSPEND ((uint16_t)0x0800) /*!<SD I/O suspend command */
+#define SDIO_CMD_ENCMDCOMPL ((uint16_t)0x1000) /*!<Enable CMD completion */
+#define SDIO_CMD_NIEN ((uint16_t)0x2000) /*!<Not Interrupt Enable */
+#define SDIO_CMD_CEATACMD ((uint16_t)0x4000) /*!<CE-ATA command */
+
+/***************** Bit definition for SDIO_RESPCMD register *****************/
+#define SDIO_RESPCMD_RESPCMD ((uint8_t)0x3F) /*!<Response command index */
+
+/****************** Bit definition for SDIO_RESP0 register ******************/
+#define SDIO_RESP0_CARDSTATUS0 ((uint32_t)0xFFFFFFFF) /*!<Card Status */
+
+/****************** Bit definition for SDIO_RESP1 register ******************/
+#define SDIO_RESP1_CARDSTATUS1 ((uint32_t)0xFFFFFFFF) /*!<Card Status */
+
+/****************** Bit definition for SDIO_RESP2 register ******************/
+#define SDIO_RESP2_CARDSTATUS2 ((uint32_t)0xFFFFFFFF) /*!<Card Status */
+
+/****************** Bit definition for SDIO_RESP3 register ******************/
+#define SDIO_RESP3_CARDSTATUS3 ((uint32_t)0xFFFFFFFF) /*!<Card Status */
+
+/****************** Bit definition for SDIO_RESP4 register ******************/
+#define SDIO_RESP4_CARDSTATUS4 ((uint32_t)0xFFFFFFFF) /*!<Card Status */
+
+/****************** Bit definition for SDIO_DTIMER register *****************/
+#define SDIO_DTIMER_DATATIME ((uint32_t)0xFFFFFFFF) /*!<Data timeout period. */
+
+/****************** Bit definition for SDIO_DLEN register *******************/
+#define SDIO_DLEN_DATALENGTH ((uint32_t)0x01FFFFFF) /*!<Data length value */
+
+/****************** Bit definition for SDIO_DCTRL register ******************/
+#define SDIO_DCTRL_DTEN ((uint16_t)0x0001) /*!<Data transfer enabled bit */
+#define SDIO_DCTRL_DTDIR ((uint16_t)0x0002) /*!<Data transfer direction selection */
+#define SDIO_DCTRL_DTMODE ((uint16_t)0x0004) /*!<Data transfer mode selection */
+#define SDIO_DCTRL_DMAEN ((uint16_t)0x0008) /*!<DMA enabled bit */
+
+#define SDIO_DCTRL_DBLOCKSIZE ((uint16_t)0x00F0) /*!<DBLOCKSIZE[3:0] bits (Data block size) */
+#define SDIO_DCTRL_DBLOCKSIZE_0 ((uint16_t)0x0010) /*!<Bit 0 */
+#define SDIO_DCTRL_DBLOCKSIZE_1 ((uint16_t)0x0020) /*!<Bit 1 */
+#define SDIO_DCTRL_DBLOCKSIZE_2 ((uint16_t)0x0040) /*!<Bit 2 */
+#define SDIO_DCTRL_DBLOCKSIZE_3 ((uint16_t)0x0080) /*!<Bit 3 */
+
+#define SDIO_DCTRL_RWSTART ((uint16_t)0x0100) /*!<Read wait start */
+#define SDIO_DCTRL_RWSTOP ((uint16_t)0x0200) /*!<Read wait stop */
+#define SDIO_DCTRL_RWMOD ((uint16_t)0x0400) /*!<Read wait mode */
+#define SDIO_DCTRL_SDIOEN ((uint16_t)0x0800) /*!<SD I/O enable functions */
+
+/****************** Bit definition for SDIO_DCOUNT register *****************/
+#define SDIO_DCOUNT_DATACOUNT ((uint32_t)0x01FFFFFF) /*!<Data count value */
+
+/****************** Bit definition for SDIO_STA register ********************/
+#define SDIO_STA_CCRCFAIL ((uint32_t)0x00000001) /*!<Command response received (CRC check failed) */
+#define SDIO_STA_DCRCFAIL ((uint32_t)0x00000002) /*!<Data block sent/received (CRC check failed) */
+#define SDIO_STA_CTIMEOUT ((uint32_t)0x00000004) /*!<Command response timeout */
+#define SDIO_STA_DTIMEOUT ((uint32_t)0x00000008) /*!<Data timeout */
+#define SDIO_STA_TXUNDERR ((uint32_t)0x00000010) /*!<Transmit FIFO underrun error */
+#define SDIO_STA_RXOVERR ((uint32_t)0x00000020) /*!<Received FIFO overrun error */
+#define SDIO_STA_CMDREND ((uint32_t)0x00000040) /*!<Command response received (CRC check passed) */
+#define SDIO_STA_CMDSENT ((uint32_t)0x00000080) /*!<Command sent (no response required) */
+#define SDIO_STA_DATAEND ((uint32_t)0x00000100) /*!<Data end (data counter, SDIDCOUNT, is zero) */
+#define SDIO_STA_STBITERR ((uint32_t)0x00000200) /*!<Start bit not detected on all data signals in wide bus mode */
+#define SDIO_STA_DBCKEND ((uint32_t)0x00000400) /*!<Data block sent/received (CRC check passed) */
+#define SDIO_STA_CMDACT ((uint32_t)0x00000800) /*!<Command transfer in progress */
+#define SDIO_STA_TXACT ((uint32_t)0x00001000) /*!<Data transmit in progress */
+#define SDIO_STA_RXACT ((uint32_t)0x00002000) /*!<Data receive in progress */
+#define SDIO_STA_TXFIFOHE ((uint32_t)0x00004000) /*!<Transmit FIFO Half Empty: at least 8 words can be written into the FIFO */
+#define SDIO_STA_RXFIFOHF ((uint32_t)0x00008000) /*!<Receive FIFO Half Full: there are at least 8 words in the FIFO */
+#define SDIO_STA_TXFIFOF ((uint32_t)0x00010000) /*!<Transmit FIFO full */
+#define SDIO_STA_RXFIFOF ((uint32_t)0x00020000) /*!<Receive FIFO full */
+#define SDIO_STA_TXFIFOE ((uint32_t)0x00040000) /*!<Transmit FIFO empty */
+#define SDIO_STA_RXFIFOE ((uint32_t)0x00080000) /*!<Receive FIFO empty */
+#define SDIO_STA_TXDAVL ((uint32_t)0x00100000) /*!<Data available in transmit FIFO */
+#define SDIO_STA_RXDAVL ((uint32_t)0x00200000) /*!<Data available in receive FIFO */
+#define SDIO_STA_SDIOIT ((uint32_t)0x00400000) /*!<SDIO interrupt received */
+#define SDIO_STA_CEATAEND ((uint32_t)0x00800000) /*!<CE-ATA command completion signal received for CMD61 */
+
+/******************* Bit definition for SDIO_ICR register *******************/
+#define SDIO_ICR_CCRCFAILC ((uint32_t)0x00000001) /*!<CCRCFAIL flag clear bit */
+#define SDIO_ICR_DCRCFAILC ((uint32_t)0x00000002) /*!<DCRCFAIL flag clear bit */
+#define SDIO_ICR_CTIMEOUTC ((uint32_t)0x00000004) /*!<CTIMEOUT flag clear bit */
+#define SDIO_ICR_DTIMEOUTC ((uint32_t)0x00000008) /*!<DTIMEOUT flag clear bit */
+#define SDIO_ICR_TXUNDERRC ((uint32_t)0x00000010) /*!<TXUNDERR flag clear bit */
+#define SDIO_ICR_RXOVERRC ((uint32_t)0x00000020) /*!<RXOVERR flag clear bit */
+#define SDIO_ICR_CMDRENDC ((uint32_t)0x00000040) /*!<CMDREND flag clear bit */
+#define SDIO_ICR_CMDSENTC ((uint32_t)0x00000080) /*!<CMDSENT flag clear bit */
+#define SDIO_ICR_DATAENDC ((uint32_t)0x00000100) /*!<DATAEND flag clear bit */
+#define SDIO_ICR_STBITERRC ((uint32_t)0x00000200) /*!<STBITERR flag clear bit */
+#define SDIO_ICR_DBCKENDC ((uint32_t)0x00000400) /*!<DBCKEND flag clear bit */
+#define SDIO_ICR_SDIOITC ((uint32_t)0x00400000) /*!<SDIOIT flag clear bit */
+#define SDIO_ICR_CEATAENDC ((uint32_t)0x00800000) /*!<CEATAEND flag clear bit */
+
+/****************** Bit definition for SDIO_MASK register *******************/
+#define SDIO_MASK_CCRCFAILIE ((uint32_t)0x00000001) /*!<Command CRC Fail Interrupt Enable */
+#define SDIO_MASK_DCRCFAILIE ((uint32_t)0x00000002) /*!<Data CRC Fail Interrupt Enable */
+#define SDIO_MASK_CTIMEOUTIE ((uint32_t)0x00000004) /*!<Command TimeOut Interrupt Enable */
+#define SDIO_MASK_DTIMEOUTIE ((uint32_t)0x00000008) /*!<Data TimeOut Interrupt Enable */
+#define SDIO_MASK_TXUNDERRIE ((uint32_t)0x00000010) /*!<Tx FIFO UnderRun Error Interrupt Enable */
+#define SDIO_MASK_RXOVERRIE ((uint32_t)0x00000020) /*!<Rx FIFO OverRun Error Interrupt Enable */
+#define SDIO_MASK_CMDRENDIE ((uint32_t)0x00000040) /*!<Command Response Received Interrupt Enable */
+#define SDIO_MASK_CMDSENTIE ((uint32_t)0x00000080) /*!<Command Sent Interrupt Enable */
+#define SDIO_MASK_DATAENDIE ((uint32_t)0x00000100) /*!<Data End Interrupt Enable */
+#define SDIO_MASK_STBITERRIE ((uint32_t)0x00000200) /*!<Start Bit Error Interrupt Enable */
+#define SDIO_MASK_DBCKENDIE ((uint32_t)0x00000400) /*!<Data Block End Interrupt Enable */
+#define SDIO_MASK_CMDACTIE ((uint32_t)0x00000800) /*!<CCommand Acting Interrupt Enable */
+#define SDIO_MASK_TXACTIE ((uint32_t)0x00001000) /*!<Data Transmit Acting Interrupt Enable */
+#define SDIO_MASK_RXACTIE ((uint32_t)0x00002000) /*!<Data receive acting interrupt enabled */
+#define SDIO_MASK_TXFIFOHEIE ((uint32_t)0x00004000) /*!<Tx FIFO Half Empty interrupt Enable */
+#define SDIO_MASK_RXFIFOHFIE ((uint32_t)0x00008000) /*!<Rx FIFO Half Full interrupt Enable */
+#define SDIO_MASK_TXFIFOFIE ((uint32_t)0x00010000) /*!<Tx FIFO Full interrupt Enable */
+#define SDIO_MASK_RXFIFOFIE ((uint32_t)0x00020000) /*!<Rx FIFO Full interrupt Enable */
+#define SDIO_MASK_TXFIFOEIE ((uint32_t)0x00040000) /*!<Tx FIFO Empty interrupt Enable */
+#define SDIO_MASK_RXFIFOEIE ((uint32_t)0x00080000) /*!<Rx FIFO Empty interrupt Enable */
+#define SDIO_MASK_TXDAVLIE ((uint32_t)0x00100000) /*!<Data available in Tx FIFO interrupt Enable */
+#define SDIO_MASK_RXDAVLIE ((uint32_t)0x00200000) /*!<Data available in Rx FIFO interrupt Enable */
+#define SDIO_MASK_SDIOITIE ((uint32_t)0x00400000) /*!<SDIO Mode Interrupt Received interrupt Enable */
+#define SDIO_MASK_CEATAENDIE ((uint32_t)0x00800000) /*!<CE-ATA command completion signal received Interrupt Enable */
+
+/***************** Bit definition for SDIO_FIFOCNT register *****************/
+#define SDIO_FIFOCNT_FIFOCOUNT ((uint32_t)0x00FFFFFF) /*!<Remaining number of words to be written to or read from the FIFO */
+
+/****************** Bit definition for SDIO_FIFO register *******************/
+#define SDIO_FIFO_FIFODATA ((uint32_t)0xFFFFFFFF) /*!<Receive and transmit FIFO data */
+
+/******************************************************************************/
+/* */
+/* Serial Peripheral Interface */
+/* */
+/******************************************************************************/
+/******************* Bit definition for SPI_CR1 register ********************/
+#define SPI_CR1_CPHA ((uint16_t)0x0001) /*!<Clock Phase */
+#define SPI_CR1_CPOL ((uint16_t)0x0002) /*!<Clock Polarity */
+#define SPI_CR1_MSTR ((uint16_t)0x0004) /*!<Master Selection */
+
+#define SPI_CR1_BR ((uint16_t)0x0038) /*!<BR[2:0] bits (Baud Rate Control) */
+#define SPI_CR1_BR_0 ((uint16_t)0x0008) /*!<Bit 0 */
+#define SPI_CR1_BR_1 ((uint16_t)0x0010) /*!<Bit 1 */
+#define SPI_CR1_BR_2 ((uint16_t)0x0020) /*!<Bit 2 */
+
+#define SPI_CR1_SPE ((uint16_t)0x0040) /*!<SPI Enable */
+#define SPI_CR1_LSBFIRST ((uint16_t)0x0080) /*!<Frame Format */
+#define SPI_CR1_SSI ((uint16_t)0x0100) /*!<Internal slave select */
+#define SPI_CR1_SSM ((uint16_t)0x0200) /*!<Software slave management */
+#define SPI_CR1_RXONLY ((uint16_t)0x0400) /*!<Receive only */
+#define SPI_CR1_DFF ((uint16_t)0x0800) /*!<Data Frame Format */
+#define SPI_CR1_CRCNEXT ((uint16_t)0x1000) /*!<Transmit CRC next */
+#define SPI_CR1_CRCEN ((uint16_t)0x2000) /*!<Hardware CRC calculation enable */
+#define SPI_CR1_BIDIOE ((uint16_t)0x4000) /*!<Output enable in bidirectional mode */
+#define SPI_CR1_BIDIMODE ((uint16_t)0x8000) /*!<Bidirectional data mode enable */
+
+/******************* Bit definition for SPI_CR2 register ********************/
+#define SPI_CR2_RXDMAEN ((uint8_t)0x01) /*!<Rx Buffer DMA Enable */
+#define SPI_CR2_TXDMAEN ((uint8_t)0x02) /*!<Tx Buffer DMA Enable */
+#define SPI_CR2_SSOE ((uint8_t)0x04) /*!<SS Output Enable */
+#define SPI_CR2_ERRIE ((uint8_t)0x20) /*!<Error Interrupt Enable */
+#define SPI_CR2_RXNEIE ((uint8_t)0x40) /*!<RX buffer Not Empty Interrupt Enable */
+#define SPI_CR2_TXEIE ((uint8_t)0x80) /*!<Tx buffer Empty Interrupt Enable */
+
+/******************** Bit definition for SPI_SR register ********************/
+#define SPI_SR_RXNE ((uint8_t)0x01) /*!<Receive buffer Not Empty */
+#define SPI_SR_TXE ((uint8_t)0x02) /*!<Transmit buffer Empty */
+#define SPI_SR_CHSIDE ((uint8_t)0x04) /*!<Channel side */
+#define SPI_SR_UDR ((uint8_t)0x08) /*!<Underrun flag */
+#define SPI_SR_CRCERR ((uint8_t)0x10) /*!<CRC Error flag */
+#define SPI_SR_MODF ((uint8_t)0x20) /*!<Mode fault */
+#define SPI_SR_OVR ((uint8_t)0x40) /*!<Overrun flag */
+#define SPI_SR_BSY ((uint8_t)0x80) /*!<Busy flag */
+
+/******************** Bit definition for SPI_DR register ********************/
+#define SPI_DR_DR ((uint16_t)0xFFFF) /*!<Data Register */
+
+/******************* Bit definition for SPI_CRCPR register ******************/
+#define SPI_CRCPR_CRCPOLY ((uint16_t)0xFFFF) /*!<CRC polynomial register */
+
+/****************** Bit definition for SPI_RXCRCR register ******************/
+#define SPI_RXCRCR_RXCRC ((uint16_t)0xFFFF) /*!<Rx CRC Register */
+
+/****************** Bit definition for SPI_TXCRCR register ******************/
+#define SPI_TXCRCR_TXCRC ((uint16_t)0xFFFF) /*!<Tx CRC Register */
+
+/****************** Bit definition for SPI_I2SCFGR register *****************/
+#define SPI_I2SCFGR_CHLEN ((uint16_t)0x0001) /*!<Channel length (number of bits per audio channel) */
+
+#define SPI_I2SCFGR_DATLEN ((uint16_t)0x0006) /*!<DATLEN[1:0] bits (Data length to be transferred) */
+#define SPI_I2SCFGR_DATLEN_0 ((uint16_t)0x0002) /*!<Bit 0 */
+#define SPI_I2SCFGR_DATLEN_1 ((uint16_t)0x0004) /*!<Bit 1 */
+
+#define SPI_I2SCFGR_CKPOL ((uint16_t)0x0008) /*!<steady state clock polarity */
+
+#define SPI_I2SCFGR_I2SSTD ((uint16_t)0x0030) /*!<I2SSTD[1:0] bits (I2S standard selection) */
+#define SPI_I2SCFGR_I2SSTD_0 ((uint16_t)0x0010) /*!<Bit 0 */
+#define SPI_I2SCFGR_I2SSTD_1 ((uint16_t)0x0020) /*!<Bit 1 */
+
+#define SPI_I2SCFGR_PCMSYNC ((uint16_t)0x0080) /*!<PCM frame synchronization */
+
+#define SPI_I2SCFGR_I2SCFG ((uint16_t)0x0300) /*!<I2SCFG[1:0] bits (I2S configuration mode) */
+#define SPI_I2SCFGR_I2SCFG_0 ((uint16_t)0x0100) /*!<Bit 0 */
+#define SPI_I2SCFGR_I2SCFG_1 ((uint16_t)0x0200) /*!<Bit 1 */
+
+#define SPI_I2SCFGR_I2SE ((uint16_t)0x0400) /*!<I2S Enable */
+#define SPI_I2SCFGR_I2SMOD ((uint16_t)0x0800) /*!<I2S mode selection */
+
+/****************** Bit definition for SPI_I2SPR register *******************/
+#define SPI_I2SPR_I2SDIV ((uint16_t)0x00FF) /*!<I2S Linear prescaler */
+#define SPI_I2SPR_ODD ((uint16_t)0x0100) /*!<Odd factor for the prescaler */
+#define SPI_I2SPR_MCKOE ((uint16_t)0x0200) /*!<Master Clock Output Enable */
+
+/******************************************************************************/
+/* */
+/* SYSCFG */
+/* */
+/******************************************************************************/
+/****************** Bit definition for SYSCFG_MEMRMP register ***************/
+#define SYSCFG_MEMRMP_MEM_MODE ((uint32_t)0x00000003) /*!<SYSCFG_Memory Remap Config */
+#define SYSCFG_MEMRMP_MEM_MODE_0 ((uint32_t)0x00000001)
+#define SYSCFG_MEMRMP_MEM_MODE_1 ((uint32_t)0x00000002)
+
+/****************** Bit definition for SYSCFG_PMC register ******************/
+#define SYSCFG_PMC_MII_RMII ((uint16_t)0x0080) /*!<Ethernet PHY interface selection */
+
+/***************** Bit definition for SYSCFG_EXTICR1 register ***************/
+#define SYSCFG_EXTICR1_EXTI0 ((uint16_t)0x000F) /*!<EXTI 0 configuration */
+#define SYSCFG_EXTICR1_EXTI1 ((uint16_t)0x00F0) /*!<EXTI 1 configuration */
+#define SYSCFG_EXTICR1_EXTI2 ((uint16_t)0x0F00) /*!<EXTI 2 configuration */
+#define SYSCFG_EXTICR1_EXTI3 ((uint16_t)0xF000) /*!<EXTI 3 configuration */
+/**
+ * @brief EXTI0 configuration
+ */
+#define SYSCFG_EXTICR1_EXTI0_PA ((uint16_t)0x0000) /*!<PA[0] pin */
+#define SYSCFG_EXTICR1_EXTI0_PB ((uint16_t)0x0001) /*!<PB[0] pin */
+#define SYSCFG_EXTICR1_EXTI0_PC ((uint16_t)0x0002) /*!<PC[0] pin */
+#define SYSCFG_EXTICR1_EXTI0_PD ((uint16_t)0x0003) /*!<PD[0] pin */
+#define SYSCFG_EXTICR1_EXTI0_PE ((uint16_t)0x0004) /*!<PE[0] pin */
+#define SYSCFG_EXTICR1_EXTI0_PF ((uint16_t)0x0005) /*!<PF[0] pin */
+#define SYSCFG_EXTICR1_EXTI0_PG ((uint16_t)0x0006) /*!<PG[0] pin */
+#define SYSCFG_EXTICR1_EXTI0_PH ((uint16_t)0x0007) /*!<PH[0] pin */
+#define SYSCFG_EXTICR1_EXTI0_PI ((uint16_t)0x0008) /*!<PI[0] pin */
+/**
+ * @brief EXTI1 configuration
+ */
+#define SYSCFG_EXTICR1_EXTI1_PA ((uint16_t)0x0000) /*!<PA[1] pin */
+#define SYSCFG_EXTICR1_EXTI1_PB ((uint16_t)0x0010) /*!<PB[1] pin */
+#define SYSCFG_EXTICR1_EXTI1_PC ((uint16_t)0x0020) /*!<PC[1] pin */
+#define SYSCFG_EXTICR1_EXTI1_PD ((uint16_t)0x0030) /*!<PD[1] pin */
+#define SYSCFG_EXTICR1_EXTI1_PE ((uint16_t)0x0040) /*!<PE[1] pin */
+#define SYSCFG_EXTICR1_EXTI1_PF ((uint16_t)0x0050) /*!<PF[1] pin */
+#define SYSCFG_EXTICR1_EXTI1_PG ((uint16_t)0x0060) /*!<PG[1] pin */
+#define SYSCFG_EXTICR1_EXTI1_PH ((uint16_t)0x0070) /*!<PH[1] pin */
+#define SYSCFG_EXTICR1_EXTI1_PI ((uint16_t)0x0080) /*!<PI[1] pin */
+/**
+ * @brief EXTI2 configuration
+ */
+#define SYSCFG_EXTICR1_EXTI2_PA ((uint16_t)0x0000) /*!<PA[2] pin */
+#define SYSCFG_EXTICR1_EXTI2_PB ((uint16_t)0x0100) /*!<PB[2] pin */
+#define SYSCFG_EXTICR1_EXTI2_PC ((uint16_t)0x0200) /*!<PC[2] pin */
+#define SYSCFG_EXTICR1_EXTI2_PD ((uint16_t)0x0300) /*!<PD[2] pin */
+#define SYSCFG_EXTICR1_EXTI2_PE ((uint16_t)0x0400) /*!<PE[2] pin */
+#define SYSCFG_EXTICR1_EXTI2_PF ((uint16_t)0x0500) /*!<PF[2] pin */
+#define SYSCFG_EXTICR1_EXTI2_PG ((uint16_t)0x0600) /*!<PG[2] pin */
+#define SYSCFG_EXTICR1_EXTI2_PH ((uint16_t)0x0700) /*!<PH[2] pin */
+#define SYSCFG_EXTICR1_EXTI2_PI ((uint16_t)0x0800) /*!<PI[2] pin */
+/**
+ * @brief EXTI3 configuration
+ */
+#define SYSCFG_EXTICR1_EXTI3_PA ((uint16_t)0x0000) /*!<PA[3] pin */
+#define SYSCFG_EXTICR1_EXTI3_PB ((uint16_t)0x1000) /*!<PB[3] pin */
+#define SYSCFG_EXTICR1_EXTI3_PC ((uint16_t)0x2000) /*!<PC[3] pin */
+#define SYSCFG_EXTICR1_EXTI3_PD ((uint16_t)0x3000) /*!<PD[3] pin */
+#define SYSCFG_EXTICR1_EXTI3_PE ((uint16_t)0x4000) /*!<PE[3] pin */
+#define SYSCFG_EXTICR1_EXTI3_PF ((uint16_t)0x5000) /*!<PF[3] pin */
+#define SYSCFG_EXTICR1_EXTI3_PG ((uint16_t)0x6000) /*!<PG[3] pin */
+#define SYSCFG_EXTICR1_EXTI3_PH ((uint16_t)0x7000) /*!<PH[3] pin */
+#define SYSCFG_EXTICR1_EXTI3_PI ((uint16_t)0x8000) /*!<PI[3] pin */
+
+/***************** Bit definition for SYSCFG_EXTICR2 register ***************/
+#define SYSCFG_EXTICR2_EXTI4 ((uint16_t)0x000F) /*!<EXTI 4 configuration */
+#define SYSCFG_EXTICR2_EXTI5 ((uint16_t)0x00F0) /*!<EXTI 5 configuration */
+#define SYSCFG_EXTICR2_EXTI6 ((uint16_t)0x0F00) /*!<EXTI 6 configuration */
+#define SYSCFG_EXTICR2_EXTI7 ((uint16_t)0xF000) /*!<EXTI 7 configuration */
+/**
+ * @brief EXTI4 configuration
+ */
+#define SYSCFG_EXTICR2_EXTI4_PA ((uint16_t)0x0000) /*!<PA[4] pin */
+#define SYSCFG_EXTICR2_EXTI4_PB ((uint16_t)0x0001) /*!<PB[4] pin */
+#define SYSCFG_EXTICR2_EXTI4_PC ((uint16_t)0x0002) /*!<PC[4] pin */
+#define SYSCFG_EXTICR2_EXTI4_PD ((uint16_t)0x0003) /*!<PD[4] pin */
+#define SYSCFG_EXTICR2_EXTI4_PE ((uint16_t)0x0004) /*!<PE[4] pin */
+#define SYSCFG_EXTICR2_EXTI4_PF ((uint16_t)0x0005) /*!<PF[4] pin */
+#define SYSCFG_EXTICR2_EXTI4_PG ((uint16_t)0x0006) /*!<PG[4] pin */
+#define SYSCFG_EXTICR2_EXTI4_PH ((uint16_t)0x0007) /*!<PH[4] pin */
+#define SYSCFG_EXTICR2_EXTI4_PI ((uint16_t)0x0008) /*!<PI[4] pin */
+/**
+ * @brief EXTI5 configuration
+ */
+#define SYSCFG_EXTICR2_EXTI5_PA ((uint16_t)0x0000) /*!<PA[5] pin */
+#define SYSCFG_EXTICR2_EXTI5_PB ((uint16_t)0x0010) /*!<PB[5] pin */
+#define SYSCFG_EXTICR2_EXTI5_PC ((uint16_t)0x0020) /*!<PC[5] pin */
+#define SYSCFG_EXTICR2_EXTI5_PD ((uint16_t)0x0030) /*!<PD[5] pin */
+#define SYSCFG_EXTICR2_EXTI5_PE ((uint16_t)0x0040) /*!<PE[5] pin */
+#define SYSCFG_EXTICR2_EXTI5_PF ((uint16_t)0x0050) /*!<PF[5] pin */
+#define SYSCFG_EXTICR2_EXTI5_PG ((uint16_t)0x0060) /*!<PG[5] pin */
+#define SYSCFG_EXTICR2_EXTI5_PH ((uint16_t)0x0070) /*!<PH[5] pin */
+#define SYSCFG_EXTICR2_EXTI5_PI ((uint16_t)0x0080) /*!<PI[5] pin */
+/**
+ * @brief EXTI6 configuration
+ */
+#define SYSCFG_EXTICR2_EXTI6_PA ((uint16_t)0x0000) /*!<PA[6] pin */
+#define SYSCFG_EXTICR2_EXTI6_PB ((uint16_t)0x0100) /*!<PB[6] pin */
+#define SYSCFG_EXTICR2_EXTI6_PC ((uint16_t)0x0200) /*!<PC[6] pin */
+#define SYSCFG_EXTICR2_EXTI6_PD ((uint16_t)0x0300) /*!<PD[6] pin */
+#define SYSCFG_EXTICR2_EXTI6_PE ((uint16_t)0x0400) /*!<PE[6] pin */
+#define SYSCFG_EXTICR2_EXTI6_PF ((uint16_t)0x0500) /*!<PF[6] pin */
+#define SYSCFG_EXTICR2_EXTI6_PG ((uint16_t)0x0600) /*!<PG[6] pin */
+#define SYSCFG_EXTICR2_EXTI6_PH ((uint16_t)0x0700) /*!<PH[6] pin */
+#define SYSCFG_EXTICR2_EXTI6_PI ((uint16_t)0x0800) /*!<PI[6] pin */
+/**
+ * @brief EXTI7 configuration
+ */
+#define SYSCFG_EXTICR2_EXTI7_PA ((uint16_t)0x0000) /*!<PA[7] pin */
+#define SYSCFG_EXTICR2_EXTI7_PB ((uint16_t)0x1000) /*!<PB[7] pin */
+#define SYSCFG_EXTICR2_EXTI7_PC ((uint16_t)0x2000) /*!<PC[7] pin */
+#define SYSCFG_EXTICR2_EXTI7_PD ((uint16_t)0x3000) /*!<PD[7] pin */
+#define SYSCFG_EXTICR2_EXTI7_PE ((uint16_t)0x4000) /*!<PE[7] pin */
+#define SYSCFG_EXTICR2_EXTI7_PF ((uint16_t)0x5000) /*!<PF[7] pin */
+#define SYSCFG_EXTICR2_EXTI7_PG ((uint16_t)0x6000) /*!<PG[7] pin */
+#define SYSCFG_EXTICR2_EXTI7_PH ((uint16_t)0x7000) /*!<PH[7] pin */
+#define SYSCFG_EXTICR2_EXTI7_PI ((uint16_t)0x8000) /*!<PI[7] pin */
+
+/***************** Bit definition for SYSCFG_EXTICR3 register ***************/
+#define SYSCFG_EXTICR3_EXTI8 ((uint16_t)0x000F) /*!<EXTI 8 configuration */
+#define SYSCFG_EXTICR3_EXTI9 ((uint16_t)0x00F0) /*!<EXTI 9 configuration */
+#define SYSCFG_EXTICR3_EXTI10 ((uint16_t)0x0F00) /*!<EXTI 10 configuration */
+#define SYSCFG_EXTICR3_EXTI11 ((uint16_t)0xF000) /*!<EXTI 11 configuration */
+
+/**
+ * @brief EXTI8 configuration
+ */
+#define SYSCFG_EXTICR3_EXTI8_PA ((uint16_t)0x0000) /*!<PA[8] pin */
+#define SYSCFG_EXTICR3_EXTI8_PB ((uint16_t)0x0001) /*!<PB[8] pin */
+#define SYSCFG_EXTICR3_EXTI8_PC ((uint16_t)0x0002) /*!<PC[8] pin */
+#define SYSCFG_EXTICR3_EXTI8_PD ((uint16_t)0x0003) /*!<PD[8] pin */
+#define SYSCFG_EXTICR3_EXTI8_PE ((uint16_t)0x0004) /*!<PE[8] pin */
+#define SYSCFG_EXTICR3_EXTI8_PF ((uint16_t)0x0005) /*!<PF[8] pin */
+#define SYSCFG_EXTICR3_EXTI8_PG ((uint16_t)0x0006) /*!<PG[8] pin */
+#define SYSCFG_EXTICR3_EXTI8_PH ((uint16_t)0x0007) /*!<PH[8] pin */
+#define SYSCFG_EXTICR3_EXTI8_PI ((uint16_t)0x0008) /*!<PI[8] pin */
+/**
+ * @brief EXTI9 configuration
+ */
+#define SYSCFG_EXTICR3_EXTI9_PA ((uint16_t)0x0000) /*!<PA[9] pin */
+#define SYSCFG_EXTICR3_EXTI9_PB ((uint16_t)0x0010) /*!<PB[9] pin */
+#define SYSCFG_EXTICR3_EXTI9_PC ((uint16_t)0x0020) /*!<PC[9] pin */
+#define SYSCFG_EXTICR3_EXTI9_PD ((uint16_t)0x0030) /*!<PD[9] pin */
+#define SYSCFG_EXTICR3_EXTI9_PE ((uint16_t)0x0040) /*!<PE[9] pin */
+#define SYSCFG_EXTICR3_EXTI9_PF ((uint16_t)0x0050) /*!<PF[9] pin */
+#define SYSCFG_EXTICR3_EXTI9_PG ((uint16_t)0x0060) /*!<PG[9] pin */
+#define SYSCFG_EXTICR3_EXTI9_PH ((uint16_t)0x0070) /*!<PH[9] pin */
+#define SYSCFG_EXTICR3_EXTI9_PI ((uint16_t)0x0080) /*!<PI[9] pin */
+/**
+ * @brief EXTI10 configuration
+ */
+#define SYSCFG_EXTICR3_EXTI10_PA ((uint16_t)0x0000) /*!<PA[10] pin */
+#define SYSCFG_EXTICR3_EXTI10_PB ((uint16_t)0x0100) /*!<PB[10] pin */
+#define SYSCFG_EXTICR3_EXTI10_PC ((uint16_t)0x0200) /*!<PC[10] pin */
+#define SYSCFG_EXTICR3_EXTI10_PD ((uint16_t)0x0300) /*!<PD[10] pin */
+#define SYSCFG_EXTICR3_EXTI10_PE ((uint16_t)0x0400) /*!<PE[10] pin */
+#define SYSCFG_EXTICR3_EXTI10_PF ((uint16_t)0x0500) /*!<PF[10] pin */
+#define SYSCFG_EXTICR3_EXTI10_PG ((uint16_t)0x0600) /*!<PG[10] pin */
+#define SYSCFG_EXTICR3_EXTI10_PH ((uint16_t)0x0700) /*!<PH[10] pin */
+#define SYSCFG_EXTICR3_EXTI10_PI ((uint16_t)0x0800) /*!<PI[10] pin */
+/**
+ * @brief EXTI11 configuration
+ */
+#define SYSCFG_EXTICR3_EXTI11_PA ((uint16_t)0x0000) /*!<PA[11] pin */
+#define SYSCFG_EXTICR3_EXTI11_PB ((uint16_t)0x1000) /*!<PB[11] pin */
+#define SYSCFG_EXTICR3_EXTI11_PC ((uint16_t)0x2000) /*!<PC[11] pin */
+#define SYSCFG_EXTICR3_EXTI11_PD ((uint16_t)0x3000) /*!<PD[11] pin */
+#define SYSCFG_EXTICR3_EXTI11_PE ((uint16_t)0x4000) /*!<PE[11] pin */
+#define SYSCFG_EXTICR3_EXTI11_PF ((uint16_t)0x5000) /*!<PF[11] pin */
+#define SYSCFG_EXTICR3_EXTI11_PG ((uint16_t)0x6000) /*!<PG[11] pin */
+#define SYSCFG_EXTICR3_EXTI11_PH ((uint16_t)0x7000) /*!<PH[11] pin */
+#define SYSCFG_EXTICR3_EXTI11_PI ((uint16_t)0x8000) /*!<PI[11] pin */
+
+/***************** Bit definition for SYSCFG_EXTICR4 register ***************/
+#define SYSCFG_EXTICR4_EXTI12 ((uint16_t)0x000F) /*!<EXTI 12 configuration */
+#define SYSCFG_EXTICR4_EXTI13 ((uint16_t)0x00F0) /*!<EXTI 13 configuration */
+#define SYSCFG_EXTICR4_EXTI14 ((uint16_t)0x0F00) /*!<EXTI 14 configuration */
+#define SYSCFG_EXTICR4_EXTI15 ((uint16_t)0xF000) /*!<EXTI 15 configuration */
+/**
+ * @brief EXTI12 configuration
+ */
+#define SYSCFG_EXTICR4_EXTI12_PA ((uint16_t)0x0000) /*!<PA[12] pin */
+#define SYSCFG_EXTICR4_EXTI12_PB ((uint16_t)0x0001) /*!<PB[12] pin */
+#define SYSCFG_EXTICR4_EXTI12_PC ((uint16_t)0x0002) /*!<PC[12] pin */
+#define SYSCFG_EXTICR4_EXTI12_PD ((uint16_t)0x0003) /*!<PD[12] pin */
+#define SYSCFG_EXTICR4_EXTI12_PE ((uint16_t)0x0004) /*!<PE[12] pin */
+#define SYSCFG_EXTICR4_EXTI12_PF ((uint16_t)0x0005) /*!<PF[12] pin */
+#define SYSCFG_EXTICR4_EXTI12_PG ((uint16_t)0x0006) /*!<PG[12] pin */
+#define SYSCFG_EXTICR3_EXTI12_PH ((uint16_t)0x0007) /*!<PH[12] pin */
+/**
+ * @brief EXTI13 configuration
+ */
+#define SYSCFG_EXTICR4_EXTI13_PA ((uint16_t)0x0000) /*!<PA[13] pin */
+#define SYSCFG_EXTICR4_EXTI13_PB ((uint16_t)0x0010) /*!<PB[13] pin */
+#define SYSCFG_EXTICR4_EXTI13_PC ((uint16_t)0x0020) /*!<PC[13] pin */
+#define SYSCFG_EXTICR4_EXTI13_PD ((uint16_t)0x0030) /*!<PD[13] pin */
+#define SYSCFG_EXTICR4_EXTI13_PE ((uint16_t)0x0040) /*!<PE[13] pin */
+#define SYSCFG_EXTICR4_EXTI13_PF ((uint16_t)0x0050) /*!<PF[13] pin */
+#define SYSCFG_EXTICR4_EXTI13_PG ((uint16_t)0x0060) /*!<PG[13] pin */
+#define SYSCFG_EXTICR3_EXTI13_PH ((uint16_t)0x0070) /*!<PH[13] pin */
+/**
+ * @brief EXTI14 configuration
+ */
+#define SYSCFG_EXTICR4_EXTI14_PA ((uint16_t)0x0000) /*!<PA[14] pin */
+#define SYSCFG_EXTICR4_EXTI14_PB ((uint16_t)0x0100) /*!<PB[14] pin */
+#define SYSCFG_EXTICR4_EXTI14_PC ((uint16_t)0x0200) /*!<PC[14] pin */
+#define SYSCFG_EXTICR4_EXTI14_PD ((uint16_t)0x0300) /*!<PD[14] pin */
+#define SYSCFG_EXTICR4_EXTI14_PE ((uint16_t)0x0400) /*!<PE[14] pin */
+#define SYSCFG_EXTICR4_EXTI14_PF ((uint16_t)0x0500) /*!<PF[14] pin */
+#define SYSCFG_EXTICR4_EXTI14_PG ((uint16_t)0x0600) /*!<PG[14] pin */
+#define SYSCFG_EXTICR3_EXTI14_PH ((uint16_t)0x0700) /*!<PH[14] pin */
+/**
+ * @brief EXTI15 configuration
+ */
+#define SYSCFG_EXTICR4_EXTI15_PA ((uint16_t)0x0000) /*!<PA[15] pin */
+#define SYSCFG_EXTICR4_EXTI15_PB ((uint16_t)0x1000) /*!<PB[15] pin */
+#define SYSCFG_EXTICR4_EXTI15_PC ((uint16_t)0x2000) /*!<PC[15] pin */
+#define SYSCFG_EXTICR4_EXTI15_PD ((uint16_t)0x3000) /*!<PD[15] pin */
+#define SYSCFG_EXTICR4_EXTI15_PE ((uint16_t)0x4000) /*!<PE[15] pin */
+#define SYSCFG_EXTICR4_EXTI15_PF ((uint16_t)0x5000) /*!<PF[15] pin */
+#define SYSCFG_EXTICR4_EXTI15_PG ((uint16_t)0x6000) /*!<PG[15] pin */
+#define SYSCFG_EXTICR3_EXTI15_PH ((uint16_t)0x7000) /*!<PH[15] pin */
+
+/****************** Bit definition for SYSCFG_CMPCR register ****************/
+#define SYSCFG_CMPCR_CMP_PD ((uint32_t)0x00000001) /*!<Compensation cell ready flag */
+#define SYSCFG_CMPCR_READY ((uint32_t)0x00000100) /*!<Compensation cell power-down */
+
+/******************************************************************************/
+/* */
+/* TIM */
+/* */
+/******************************************************************************/
+/******************* Bit definition for TIM_CR1 register ********************/
+#define TIM_CR1_CEN ((uint16_t)0x0001) /*!<Counter enable */
+#define TIM_CR1_UDIS ((uint16_t)0x0002) /*!<Update disable */
+#define TIM_CR1_URS ((uint16_t)0x0004) /*!<Update request source */
+#define TIM_CR1_OPM ((uint16_t)0x0008) /*!<One pulse mode */
+#define TIM_CR1_DIR ((uint16_t)0x0010) /*!<Direction */
+
+#define TIM_CR1_CMS ((uint16_t)0x0060) /*!<CMS[1:0] bits (Center-aligned mode selection) */
+#define TIM_CR1_CMS_0 ((uint16_t)0x0020) /*!<Bit 0 */
+#define TIM_CR1_CMS_1 ((uint16_t)0x0040) /*!<Bit 1 */
+
+#define TIM_CR1_ARPE ((uint16_t)0x0080) /*!<Auto-reload preload enable */
+
+#define TIM_CR1_CKD ((uint16_t)0x0300) /*!<CKD[1:0] bits (clock division) */
+#define TIM_CR1_CKD_0 ((uint16_t)0x0100) /*!<Bit 0 */
+#define TIM_CR1_CKD_1 ((uint16_t)0x0200) /*!<Bit 1 */
+
+/******************* Bit definition for TIM_CR2 register ********************/
+#define TIM_CR2_CCPC ((uint16_t)0x0001) /*!<Capture/Compare Preloaded Control */
+#define TIM_CR2_CCUS ((uint16_t)0x0004) /*!<Capture/Compare Control Update Selection */
+#define TIM_CR2_CCDS ((uint16_t)0x0008) /*!<Capture/Compare DMA Selection */
+
+#define TIM_CR2_MMS ((uint16_t)0x0070) /*!<MMS[2:0] bits (Master Mode Selection) */
+#define TIM_CR2_MMS_0 ((uint16_t)0x0010) /*!<Bit 0 */
+#define TIM_CR2_MMS_1 ((uint16_t)0x0020) /*!<Bit 1 */
+#define TIM_CR2_MMS_2 ((uint16_t)0x0040) /*!<Bit 2 */
+
+#define TIM_CR2_TI1S ((uint16_t)0x0080) /*!<TI1 Selection */
+#define TIM_CR2_OIS1 ((uint16_t)0x0100) /*!<Output Idle state 1 (OC1 output) */
+#define TIM_CR2_OIS1N ((uint16_t)0x0200) /*!<Output Idle state 1 (OC1N output) */
+#define TIM_CR2_OIS2 ((uint16_t)0x0400) /*!<Output Idle state 2 (OC2 output) */
+#define TIM_CR2_OIS2N ((uint16_t)0x0800) /*!<Output Idle state 2 (OC2N output) */
+#define TIM_CR2_OIS3 ((uint16_t)0x1000) /*!<Output Idle state 3 (OC3 output) */
+#define TIM_CR2_OIS3N ((uint16_t)0x2000) /*!<Output Idle state 3 (OC3N output) */
+#define TIM_CR2_OIS4 ((uint16_t)0x4000) /*!<Output Idle state 4 (OC4 output) */
+
+/******************* Bit definition for TIM_SMCR register *******************/
+#define TIM_SMCR_SMS ((uint16_t)0x0007) /*!<SMS[2:0] bits (Slave mode selection) */
+#define TIM_SMCR_SMS_0 ((uint16_t)0x0001) /*!<Bit 0 */
+#define TIM_SMCR_SMS_1 ((uint16_t)0x0002) /*!<Bit 1 */
+#define TIM_SMCR_SMS_2 ((uint16_t)0x0004) /*!<Bit 2 */
+
+#define TIM_SMCR_TS ((uint16_t)0x0070) /*!<TS[2:0] bits (Trigger selection) */
+#define TIM_SMCR_TS_0 ((uint16_t)0x0010) /*!<Bit 0 */
+#define TIM_SMCR_TS_1 ((uint16_t)0x0020) /*!<Bit 1 */
+#define TIM_SMCR_TS_2 ((uint16_t)0x0040) /*!<Bit 2 */
+
+#define TIM_SMCR_MSM ((uint16_t)0x0080) /*!<Master/slave mode */
+
+#define TIM_SMCR_ETF ((uint16_t)0x0F00) /*!<ETF[3:0] bits (External trigger filter) */
+#define TIM_SMCR_ETF_0 ((uint16_t)0x0100) /*!<Bit 0 */
+#define TIM_SMCR_ETF_1 ((uint16_t)0x0200) /*!<Bit 1 */
+#define TIM_SMCR_ETF_2 ((uint16_t)0x0400) /*!<Bit 2 */
+#define TIM_SMCR_ETF_3 ((uint16_t)0x0800) /*!<Bit 3 */
+
+#define TIM_SMCR_ETPS ((uint16_t)0x3000) /*!<ETPS[1:0] bits (External trigger prescaler) */
+#define TIM_SMCR_ETPS_0 ((uint16_t)0x1000) /*!<Bit 0 */
+#define TIM_SMCR_ETPS_1 ((uint16_t)0x2000) /*!<Bit 1 */
+
+#define TIM_SMCR_ECE ((uint16_t)0x4000) /*!<External clock enable */
+#define TIM_SMCR_ETP ((uint16_t)0x8000) /*!<External trigger polarity */
+
+/******************* Bit definition for TIM_DIER register *******************/
+#define TIM_DIER_UIE ((uint16_t)0x0001) /*!<Update interrupt enable */
+#define TIM_DIER_CC1IE ((uint16_t)0x0002) /*!<Capture/Compare 1 interrupt enable */
+#define TIM_DIER_CC2IE ((uint16_t)0x0004) /*!<Capture/Compare 2 interrupt enable */
+#define TIM_DIER_CC3IE ((uint16_t)0x0008) /*!<Capture/Compare 3 interrupt enable */
+#define TIM_DIER_CC4IE ((uint16_t)0x0010) /*!<Capture/Compare 4 interrupt enable */
+#define TIM_DIER_COMIE ((uint16_t)0x0020) /*!<COM interrupt enable */
+#define TIM_DIER_TIE ((uint16_t)0x0040) /*!<Trigger interrupt enable */
+#define TIM_DIER_BIE ((uint16_t)0x0080) /*!<Break interrupt enable */
+#define TIM_DIER_UDE ((uint16_t)0x0100) /*!<Update DMA request enable */
+#define TIM_DIER_CC1DE ((uint16_t)0x0200) /*!<Capture/Compare 1 DMA request enable */
+#define TIM_DIER_CC2DE ((uint16_t)0x0400) /*!<Capture/Compare 2 DMA request enable */
+#define TIM_DIER_CC3DE ((uint16_t)0x0800) /*!<Capture/Compare 3 DMA request enable */
+#define TIM_DIER_CC4DE ((uint16_t)0x1000) /*!<Capture/Compare 4 DMA request enable */
+#define TIM_DIER_COMDE ((uint16_t)0x2000) /*!<COM DMA request enable */
+#define TIM_DIER_TDE ((uint16_t)0x4000) /*!<Trigger DMA request enable */
+
+/******************** Bit definition for TIM_SR register ********************/
+#define TIM_SR_UIF ((uint16_t)0x0001) /*!<Update interrupt Flag */
+#define TIM_SR_CC1IF ((uint16_t)0x0002) /*!<Capture/Compare 1 interrupt Flag */
+#define TIM_SR_CC2IF ((uint16_t)0x0004) /*!<Capture/Compare 2 interrupt Flag */
+#define TIM_SR_CC3IF ((uint16_t)0x0008) /*!<Capture/Compare 3 interrupt Flag */
+#define TIM_SR_CC4IF ((uint16_t)0x0010) /*!<Capture/Compare 4 interrupt Flag */
+#define TIM_SR_COMIF ((uint16_t)0x0020) /*!<COM interrupt Flag */
+#define TIM_SR_TIF ((uint16_t)0x0040) /*!<Trigger interrupt Flag */
+#define TIM_SR_BIF ((uint16_t)0x0080) /*!<Break interrupt Flag */
+#define TIM_SR_CC1OF ((uint16_t)0x0200) /*!<Capture/Compare 1 Overcapture Flag */
+#define TIM_SR_CC2OF ((uint16_t)0x0400) /*!<Capture/Compare 2 Overcapture Flag */
+#define TIM_SR_CC3OF ((uint16_t)0x0800) /*!<Capture/Compare 3 Overcapture Flag */
+#define TIM_SR_CC4OF ((uint16_t)0x1000) /*!<Capture/Compare 4 Overcapture Flag */
+
+/******************* Bit definition for TIM_EGR register ********************/
+#define TIM_EGR_UG ((uint8_t)0x01) /*!<Update Generation */
+#define TIM_EGR_CC1G ((uint8_t)0x02) /*!<Capture/Compare 1 Generation */
+#define TIM_EGR_CC2G ((uint8_t)0x04) /*!<Capture/Compare 2 Generation */
+#define TIM_EGR_CC3G ((uint8_t)0x08) /*!<Capture/Compare 3 Generation */
+#define TIM_EGR_CC4G ((uint8_t)0x10) /*!<Capture/Compare 4 Generation */
+#define TIM_EGR_COMG ((uint8_t)0x20) /*!<Capture/Compare Control Update Generation */
+#define TIM_EGR_TG ((uint8_t)0x40) /*!<Trigger Generation */
+#define TIM_EGR_BG ((uint8_t)0x80) /*!<Break Generation */
+
+/****************** Bit definition for TIM_CCMR1 register *******************/
+#define TIM_CCMR1_CC1S ((uint16_t)0x0003) /*!<CC1S[1:0] bits (Capture/Compare 1 Selection) */
+#define TIM_CCMR1_CC1S_0 ((uint16_t)0x0001) /*!<Bit 0 */
+#define TIM_CCMR1_CC1S_1 ((uint16_t)0x0002) /*!<Bit 1 */
+
+#define TIM_CCMR1_OC1FE ((uint16_t)0x0004) /*!<Output Compare 1 Fast enable */
+#define TIM_CCMR1_OC1PE ((uint16_t)0x0008) /*!<Output Compare 1 Preload enable */
+
+#define TIM_CCMR1_OC1M ((uint16_t)0x0070) /*!<OC1M[2:0] bits (Output Compare 1 Mode) */
+#define TIM_CCMR1_OC1M_0 ((uint16_t)0x0010) /*!<Bit 0 */
+#define TIM_CCMR1_OC1M_1 ((uint16_t)0x0020) /*!<Bit 1 */
+#define TIM_CCMR1_OC1M_2 ((uint16_t)0x0040) /*!<Bit 2 */
+
+#define TIM_CCMR1_OC1CE ((uint16_t)0x0080) /*!<Output Compare 1Clear Enable */
+
+#define TIM_CCMR1_CC2S ((uint16_t)0x0300) /*!<CC2S[1:0] bits (Capture/Compare 2 Selection) */
+#define TIM_CCMR1_CC2S_0 ((uint16_t)0x0100) /*!<Bit 0 */
+#define TIM_CCMR1_CC2S_1 ((uint16_t)0x0200) /*!<Bit 1 */
+
+#define TIM_CCMR1_OC2FE ((uint16_t)0x0400) /*!<Output Compare 2 Fast enable */
+#define TIM_CCMR1_OC2PE ((uint16_t)0x0800) /*!<Output Compare 2 Preload enable */
+
+#define TIM_CCMR1_OC2M ((uint16_t)0x7000) /*!<OC2M[2:0] bits (Output Compare 2 Mode) */
+#define TIM_CCMR1_OC2M_0 ((uint16_t)0x1000) /*!<Bit 0 */
+#define TIM_CCMR1_OC2M_1 ((uint16_t)0x2000) /*!<Bit 1 */
+#define TIM_CCMR1_OC2M_2 ((uint16_t)0x4000) /*!<Bit 2 */
+
+#define TIM_CCMR1_OC2CE ((uint16_t)0x8000) /*!<Output Compare 2 Clear Enable */
+
+/*----------------------------------------------------------------------------*/
+
+#define TIM_CCMR1_IC1PSC ((uint16_t)0x000C) /*!<IC1PSC[1:0] bits (Input Capture 1 Prescaler) */
+#define TIM_CCMR1_IC1PSC_0 ((uint16_t)0x0004) /*!<Bit 0 */
+#define TIM_CCMR1_IC1PSC_1 ((uint16_t)0x0008) /*!<Bit 1 */
+
+#define TIM_CCMR1_IC1F ((uint16_t)0x00F0) /*!<IC1F[3:0] bits (Input Capture 1 Filter) */
+#define TIM_CCMR1_IC1F_0 ((uint16_t)0x0010) /*!<Bit 0 */
+#define TIM_CCMR1_IC1F_1 ((uint16_t)0x0020) /*!<Bit 1 */
+#define TIM_CCMR1_IC1F_2 ((uint16_t)0x0040) /*!<Bit 2 */
+#define TIM_CCMR1_IC1F_3 ((uint16_t)0x0080) /*!<Bit 3 */
+
+#define TIM_CCMR1_IC2PSC ((uint16_t)0x0C00) /*!<IC2PSC[1:0] bits (Input Capture 2 Prescaler) */
+#define TIM_CCMR1_IC2PSC_0 ((uint16_t)0x0400) /*!<Bit 0 */
+#define TIM_CCMR1_IC2PSC_1 ((uint16_t)0x0800) /*!<Bit 1 */
+
+#define TIM_CCMR1_IC2F ((uint16_t)0xF000) /*!<IC2F[3:0] bits (Input Capture 2 Filter) */
+#define TIM_CCMR1_IC2F_0 ((uint16_t)0x1000) /*!<Bit 0 */
+#define TIM_CCMR1_IC2F_1 ((uint16_t)0x2000) /*!<Bit 1 */
+#define TIM_CCMR1_IC2F_2 ((uint16_t)0x4000) /*!<Bit 2 */
+#define TIM_CCMR1_IC2F_3 ((uint16_t)0x8000) /*!<Bit 3 */
+
+/****************** Bit definition for TIM_CCMR2 register *******************/
+#define TIM_CCMR2_CC3S ((uint16_t)0x0003) /*!<CC3S[1:0] bits (Capture/Compare 3 Selection) */
+#define TIM_CCMR2_CC3S_0 ((uint16_t)0x0001) /*!<Bit 0 */
+#define TIM_CCMR2_CC3S_1 ((uint16_t)0x0002) /*!<Bit 1 */
+
+#define TIM_CCMR2_OC3FE ((uint16_t)0x0004) /*!<Output Compare 3 Fast enable */
+#define TIM_CCMR2_OC3PE ((uint16_t)0x0008) /*!<Output Compare 3 Preload enable */
+
+#define TIM_CCMR2_OC3M ((uint16_t)0x0070) /*!<OC3M[2:0] bits (Output Compare 3 Mode) */
+#define TIM_CCMR2_OC3M_0 ((uint16_t)0x0010) /*!<Bit 0 */
+#define TIM_CCMR2_OC3M_1 ((uint16_t)0x0020) /*!<Bit 1 */
+#define TIM_CCMR2_OC3M_2 ((uint16_t)0x0040) /*!<Bit 2 */
+
+#define TIM_CCMR2_OC3CE ((uint16_t)0x0080) /*!<Output Compare 3 Clear Enable */
+
+#define TIM_CCMR2_CC4S ((uint16_t)0x0300) /*!<CC4S[1:0] bits (Capture/Compare 4 Selection) */
+#define TIM_CCMR2_CC4S_0 ((uint16_t)0x0100) /*!<Bit 0 */
+#define TIM_CCMR2_CC4S_1 ((uint16_t)0x0200) /*!<Bit 1 */
+
+#define TIM_CCMR2_OC4FE ((uint16_t)0x0400) /*!<Output Compare 4 Fast enable */
+#define TIM_CCMR2_OC4PE ((uint16_t)0x0800) /*!<Output Compare 4 Preload enable */
+
+#define TIM_CCMR2_OC4M ((uint16_t)0x7000) /*!<OC4M[2:0] bits (Output Compare 4 Mode) */
+#define TIM_CCMR2_OC4M_0 ((uint16_t)0x1000) /*!<Bit 0 */
+#define TIM_CCMR2_OC4M_1 ((uint16_t)0x2000) /*!<Bit 1 */
+#define TIM_CCMR2_OC4M_2 ((uint16_t)0x4000) /*!<Bit 2 */
+
+#define TIM_CCMR2_OC4CE ((uint16_t)0x8000) /*!<Output Compare 4 Clear Enable */
+
+/*----------------------------------------------------------------------------*/
+
+#define TIM_CCMR2_IC3PSC ((uint16_t)0x000C) /*!<IC3PSC[1:0] bits (Input Capture 3 Prescaler) */
+#define TIM_CCMR2_IC3PSC_0 ((uint16_t)0x0004) /*!<Bit 0 */
+#define TIM_CCMR2_IC3PSC_1 ((uint16_t)0x0008) /*!<Bit 1 */
+
+#define TIM_CCMR2_IC3F ((uint16_t)0x00F0) /*!<IC3F[3:0] bits (Input Capture 3 Filter) */
+#define TIM_CCMR2_IC3F_0 ((uint16_t)0x0010) /*!<Bit 0 */
+#define TIM_CCMR2_IC3F_1 ((uint16_t)0x0020) /*!<Bit 1 */
+#define TIM_CCMR2_IC3F_2 ((uint16_t)0x0040) /*!<Bit 2 */
+#define TIM_CCMR2_IC3F_3 ((uint16_t)0x0080) /*!<Bit 3 */
+
+#define TIM_CCMR2_IC4PSC ((uint16_t)0x0C00) /*!<IC4PSC[1:0] bits (Input Capture 4 Prescaler) */
+#define TIM_CCMR2_IC4PSC_0 ((uint16_t)0x0400) /*!<Bit 0 */
+#define TIM_CCMR2_IC4PSC_1 ((uint16_t)0x0800) /*!<Bit 1 */
+
+#define TIM_CCMR2_IC4F ((uint16_t)0xF000) /*!<IC4F[3:0] bits (Input Capture 4 Filter) */
+#define TIM_CCMR2_IC4F_0 ((uint16_t)0x1000) /*!<Bit 0 */
+#define TIM_CCMR2_IC4F_1 ((uint16_t)0x2000) /*!<Bit 1 */
+#define TIM_CCMR2_IC4F_2 ((uint16_t)0x4000) /*!<Bit 2 */
+#define TIM_CCMR2_IC4F_3 ((uint16_t)0x8000) /*!<Bit 3 */
+
+/******************* Bit definition for TIM_CCER register *******************/
+#define TIM_CCER_CC1E ((uint16_t)0x0001) /*!<Capture/Compare 1 output enable */
+#define TIM_CCER_CC1P ((uint16_t)0x0002) /*!<Capture/Compare 1 output Polarity */
+#define TIM_CCER_CC1NE ((uint16_t)0x0004) /*!<Capture/Compare 1 Complementary output enable */
+#define TIM_CCER_CC1NP ((uint16_t)0x0008) /*!<Capture/Compare 1 Complementary output Polarity */
+#define TIM_CCER_CC2E ((uint16_t)0x0010) /*!<Capture/Compare 2 output enable */
+#define TIM_CCER_CC2P ((uint16_t)0x0020) /*!<Capture/Compare 2 output Polarity */
+#define TIM_CCER_CC2NE ((uint16_t)0x0040) /*!<Capture/Compare 2 Complementary output enable */
+#define TIM_CCER_CC2NP ((uint16_t)0x0080) /*!<Capture/Compare 2 Complementary output Polarity */
+#define TIM_CCER_CC3E ((uint16_t)0x0100) /*!<Capture/Compare 3 output enable */
+#define TIM_CCER_CC3P ((uint16_t)0x0200) /*!<Capture/Compare 3 output Polarity */
+#define TIM_CCER_CC3NE ((uint16_t)0x0400) /*!<Capture/Compare 3 Complementary output enable */
+#define TIM_CCER_CC3NP ((uint16_t)0x0800) /*!<Capture/Compare 3 Complementary output Polarity */
+#define TIM_CCER_CC4E ((uint16_t)0x1000) /*!<Capture/Compare 4 output enable */
+#define TIM_CCER_CC4P ((uint16_t)0x2000) /*!<Capture/Compare 4 output Polarity */
+#define TIM_CCER_CC4NP ((uint16_t)0x8000) /*!<Capture/Compare 4 Complementary output Polarity */
+
+/******************* Bit definition for TIM_CNT register ********************/
+#define TIM_CNT_CNT ((uint16_t)0xFFFF) /*!<Counter Value */
+
+/******************* Bit definition for TIM_PSC register ********************/
+#define TIM_PSC_PSC ((uint16_t)0xFFFF) /*!<Prescaler Value */
+
+/******************* Bit definition for TIM_ARR register ********************/
+#define TIM_ARR_ARR ((uint16_t)0xFFFF) /*!<actual auto-reload Value */
+
+/******************* Bit definition for TIM_RCR register ********************/
+#define TIM_RCR_REP ((uint8_t)0xFF) /*!<Repetition Counter Value */
+
+/******************* Bit definition for TIM_CCR1 register *******************/
+#define TIM_CCR1_CCR1 ((uint16_t)0xFFFF) /*!<Capture/Compare 1 Value */
+
+/******************* Bit definition for TIM_CCR2 register *******************/
+#define TIM_CCR2_CCR2 ((uint16_t)0xFFFF) /*!<Capture/Compare 2 Value */
+
+/******************* Bit definition for TIM_CCR3 register *******************/
+#define TIM_CCR3_CCR3 ((uint16_t)0xFFFF) /*!<Capture/Compare 3 Value */
+
+/******************* Bit definition for TIM_CCR4 register *******************/
+#define TIM_CCR4_CCR4 ((uint16_t)0xFFFF) /*!<Capture/Compare 4 Value */
+
+/******************* Bit definition for TIM_BDTR register *******************/
+#define TIM_BDTR_DTG ((uint16_t)0x00FF) /*!<DTG[0:7] bits (Dead-Time Generator set-up) */
+#define TIM_BDTR_DTG_0 ((uint16_t)0x0001) /*!<Bit 0 */
+#define TIM_BDTR_DTG_1 ((uint16_t)0x0002) /*!<Bit 1 */
+#define TIM_BDTR_DTG_2 ((uint16_t)0x0004) /*!<Bit 2 */
+#define TIM_BDTR_DTG_3 ((uint16_t)0x0008) /*!<Bit 3 */
+#define TIM_BDTR_DTG_4 ((uint16_t)0x0010) /*!<Bit 4 */
+#define TIM_BDTR_DTG_5 ((uint16_t)0x0020) /*!<Bit 5 */
+#define TIM_BDTR_DTG_6 ((uint16_t)0x0040) /*!<Bit 6 */
+#define TIM_BDTR_DTG_7 ((uint16_t)0x0080) /*!<Bit 7 */
+
+#define TIM_BDTR_LOCK ((uint16_t)0x0300) /*!<LOCK[1:0] bits (Lock Configuration) */
+#define TIM_BDTR_LOCK_0 ((uint16_t)0x0100) /*!<Bit 0 */
+#define TIM_BDTR_LOCK_1 ((uint16_t)0x0200) /*!<Bit 1 */
+
+#define TIM_BDTR_OSSI ((uint16_t)0x0400) /*!<Off-State Selection for Idle mode */
+#define TIM_BDTR_OSSR ((uint16_t)0x0800) /*!<Off-State Selection for Run mode */
+#define TIM_BDTR_BKE ((uint16_t)0x1000) /*!<Break enable */
+#define TIM_BDTR_BKP ((uint16_t)0x2000) /*!<Break Polarity */
+#define TIM_BDTR_AOE ((uint16_t)0x4000) /*!<Automatic Output enable */
+#define TIM_BDTR_MOE ((uint16_t)0x8000) /*!<Main Output enable */
+
+/******************* Bit definition for TIM_DCR register ********************/
+#define TIM_DCR_DBA ((uint16_t)0x001F) /*!<DBA[4:0] bits (DMA Base Address) */
+#define TIM_DCR_DBA_0 ((uint16_t)0x0001) /*!<Bit 0 */
+#define TIM_DCR_DBA_1 ((uint16_t)0x0002) /*!<Bit 1 */
+#define TIM_DCR_DBA_2 ((uint16_t)0x0004) /*!<Bit 2 */
+#define TIM_DCR_DBA_3 ((uint16_t)0x0008) /*!<Bit 3 */
+#define TIM_DCR_DBA_4 ((uint16_t)0x0010) /*!<Bit 4 */
+
+#define TIM_DCR_DBL ((uint16_t)0x1F00) /*!<DBL[4:0] bits (DMA Burst Length) */
+#define TIM_DCR_DBL_0 ((uint16_t)0x0100) /*!<Bit 0 */
+#define TIM_DCR_DBL_1 ((uint16_t)0x0200) /*!<Bit 1 */
+#define TIM_DCR_DBL_2 ((uint16_t)0x0400) /*!<Bit 2 */
+#define TIM_DCR_DBL_3 ((uint16_t)0x0800) /*!<Bit 3 */
+#define TIM_DCR_DBL_4 ((uint16_t)0x1000) /*!<Bit 4 */
+
+/******************* Bit definition for TIM_DMAR register *******************/
+#define TIM_DMAR_DMAB ((uint16_t)0xFFFF) /*!<DMA register for burst accesses */
+
+/******************* Bit definition for TIM_OR register *********************/
+#define TIM_OR_TI4_RMP ((uint16_t)0x00C0) /*!<TI4_RMP[1:0] bits (TIM5 Input 4 remap) */
+#define TIM_OR_TI4_RMP_0 ((uint16_t)0x0040) /*!<Bit 0 */
+#define TIM_OR_TI4_RMP_1 ((uint16_t)0x0080) /*!<Bit 1 */
+#define TIM_OR_ITR1_RMP ((uint16_t)0x0C00) /*!<ITR1_RMP[1:0] bits (TIM2 Internal trigger 1 remap) */
+#define TIM_OR_ITR1_RMP_0 ((uint16_t)0x0400) /*!<Bit 0 */
+#define TIM_OR_ITR1_RMP_1 ((uint16_t)0x0800) /*!<Bit 1 */
+
+
+/******************************************************************************/
+/* */
+/* Universal Synchronous Asynchronous Receiver Transmitter */
+/* */
+/******************************************************************************/
+/******************* Bit definition for USART_SR register *******************/
+#define USART_SR_PE ((uint16_t)0x0001) /*!<Parity Error */
+#define USART_SR_FE ((uint16_t)0x0002) /*!<Framing Error */
+#define USART_SR_NE ((uint16_t)0x0004) /*!<Noise Error Flag */
+#define USART_SR_ORE ((uint16_t)0x0008) /*!<OverRun Error */
+#define USART_SR_IDLE ((uint16_t)0x0010) /*!<IDLE line detected */
+#define USART_SR_RXNE ((uint16_t)0x0020) /*!<Read Data Register Not Empty */
+#define USART_SR_TC ((uint16_t)0x0040) /*!<Transmission Complete */
+#define USART_SR_TXE ((uint16_t)0x0080) /*!<Transmit Data Register Empty */
+#define USART_SR_LBD ((uint16_t)0x0100) /*!<LIN Break Detection Flag */
+#define USART_SR_CTS ((uint16_t)0x0200) /*!<CTS Flag */
+
+/******************* Bit definition for USART_DR register *******************/
+#define USART_DR_DR ((uint16_t)0x01FF) /*!<Data value */
+
+/****************** Bit definition for USART_BRR register *******************/
+#define USART_BRR_DIV_Fraction ((uint16_t)0x000F) /*!<Fraction of USARTDIV */
+#define USART_BRR_DIV_Mantissa ((uint16_t)0xFFF0) /*!<Mantissa of USARTDIV */
+
+/****************** Bit definition for USART_CR1 register *******************/
+#define USART_CR1_SBK ((uint16_t)0x0001) /*!<Send Break */
+#define USART_CR1_RWU ((uint16_t)0x0002) /*!<Receiver wakeup */
+#define USART_CR1_RE ((uint16_t)0x0004) /*!<Receiver Enable */
+#define USART_CR1_TE ((uint16_t)0x0008) /*!<Transmitter Enable */
+#define USART_CR1_IDLEIE ((uint16_t)0x0010) /*!<IDLE Interrupt Enable */
+#define USART_CR1_RXNEIE ((uint16_t)0x0020) /*!<RXNE Interrupt Enable */
+#define USART_CR1_TCIE ((uint16_t)0x0040) /*!<Transmission Complete Interrupt Enable */
+#define USART_CR1_TXEIE ((uint16_t)0x0080) /*!<PE Interrupt Enable */
+#define USART_CR1_PEIE ((uint16_t)0x0100) /*!<PE Interrupt Enable */
+#define USART_CR1_PS ((uint16_t)0x0200) /*!<Parity Selection */
+#define USART_CR1_PCE ((uint16_t)0x0400) /*!<Parity Control Enable */
+#define USART_CR1_WAKE ((uint16_t)0x0800) /*!<Wakeup method */
+#define USART_CR1_M ((uint16_t)0x1000) /*!<Word length */
+#define USART_CR1_UE ((uint16_t)0x2000) /*!<USART Enable */
+#define USART_CR1_OVER8 ((uint16_t)0x8000) /*!<USART Oversampling by 8 enable */
+
+/****************** Bit definition for USART_CR2 register *******************/
+#define USART_CR2_ADD ((uint16_t)0x000F) /*!<Address of the USART node */
+#define USART_CR2_LBDL ((uint16_t)0x0020) /*!<LIN Break Detection Length */
+#define USART_CR2_LBDIE ((uint16_t)0x0040) /*!<LIN Break Detection Interrupt Enable */
+#define USART_CR2_LBCL ((uint16_t)0x0100) /*!<Last Bit Clock pulse */
+#define USART_CR2_CPHA ((uint16_t)0x0200) /*!<Clock Phase */
+#define USART_CR2_CPOL ((uint16_t)0x0400) /*!<Clock Polarity */
+#define USART_CR2_CLKEN ((uint16_t)0x0800) /*!<Clock Enable */
+
+#define USART_CR2_STOP ((uint16_t)0x3000) /*!<STOP[1:0] bits (STOP bits) */
+#define USART_CR2_STOP_0 ((uint16_t)0x1000) /*!<Bit 0 */
+#define USART_CR2_STOP_1 ((uint16_t)0x2000) /*!<Bit 1 */
+
+#define USART_CR2_LINEN ((uint16_t)0x4000) /*!<LIN mode enable */
+
+/****************** Bit definition for USART_CR3 register *******************/
+#define USART_CR3_EIE ((uint16_t)0x0001) /*!<Error Interrupt Enable */
+#define USART_CR3_IREN ((uint16_t)0x0002) /*!<IrDA mode Enable */
+#define USART_CR3_IRLP ((uint16_t)0x0004) /*!<IrDA Low-Power */
+#define USART_CR3_HDSEL ((uint16_t)0x0008) /*!<Half-Duplex Selection */
+#define USART_CR3_NACK ((uint16_t)0x0010) /*!<Smartcard NACK enable */
+#define USART_CR3_SCEN ((uint16_t)0x0020) /*!<Smartcard mode enable */
+#define USART_CR3_DMAR ((uint16_t)0x0040) /*!<DMA Enable Receiver */
+#define USART_CR3_DMAT ((uint16_t)0x0080) /*!<DMA Enable Transmitter */
+#define USART_CR3_RTSE ((uint16_t)0x0100) /*!<RTS Enable */
+#define USART_CR3_CTSE ((uint16_t)0x0200) /*!<CTS Enable */
+#define USART_CR3_CTSIE ((uint16_t)0x0400) /*!<CTS Interrupt Enable */
+#define USART_CR3_ONEBIT ((uint16_t)0x0800) /*!<USART One bit method enable */
+
+/****************** Bit definition for USART_GTPR register ******************/
+#define USART_GTPR_PSC ((uint16_t)0x00FF) /*!<PSC[7:0] bits (Prescaler value) */
+#define USART_GTPR_PSC_0 ((uint16_t)0x0001) /*!<Bit 0 */
+#define USART_GTPR_PSC_1 ((uint16_t)0x0002) /*!<Bit 1 */
+#define USART_GTPR_PSC_2 ((uint16_t)0x0004) /*!<Bit 2 */
+#define USART_GTPR_PSC_3 ((uint16_t)0x0008) /*!<Bit 3 */
+#define USART_GTPR_PSC_4 ((uint16_t)0x0010) /*!<Bit 4 */
+#define USART_GTPR_PSC_5 ((uint16_t)0x0020) /*!<Bit 5 */
+#define USART_GTPR_PSC_6 ((uint16_t)0x0040) /*!<Bit 6 */
+#define USART_GTPR_PSC_7 ((uint16_t)0x0080) /*!<Bit 7 */
+
+#define USART_GTPR_GT ((uint16_t)0xFF00) /*!<Guard time value */
+
+/******************************************************************************/
+/* */
+/* Window WATCHDOG */
+/* */
+/******************************************************************************/
+/******************* Bit definition for WWDG_CR register ********************/
+#define WWDG_CR_T ((uint8_t)0x7F) /*!<T[6:0] bits (7-Bit counter (MSB to LSB)) */
+#define WWDG_CR_T0 ((uint8_t)0x01) /*!<Bit 0 */
+#define WWDG_CR_T1 ((uint8_t)0x02) /*!<Bit 1 */
+#define WWDG_CR_T2 ((uint8_t)0x04) /*!<Bit 2 */
+#define WWDG_CR_T3 ((uint8_t)0x08) /*!<Bit 3 */
+#define WWDG_CR_T4 ((uint8_t)0x10) /*!<Bit 4 */
+#define WWDG_CR_T5 ((uint8_t)0x20) /*!<Bit 5 */
+#define WWDG_CR_T6 ((uint8_t)0x40) /*!<Bit 6 */
+
+#define WWDG_CR_WDGA ((uint8_t)0x80) /*!<Activation bit */
+
+/******************* Bit definition for WWDG_CFR register *******************/
+#define WWDG_CFR_W ((uint16_t)0x007F) /*!<W[6:0] bits (7-bit window value) */
+#define WWDG_CFR_W0 ((uint16_t)0x0001) /*!<Bit 0 */
+#define WWDG_CFR_W1 ((uint16_t)0x0002) /*!<Bit 1 */
+#define WWDG_CFR_W2 ((uint16_t)0x0004) /*!<Bit 2 */
+#define WWDG_CFR_W3 ((uint16_t)0x0008) /*!<Bit 3 */
+#define WWDG_CFR_W4 ((uint16_t)0x0010) /*!<Bit 4 */
+#define WWDG_CFR_W5 ((uint16_t)0x0020) /*!<Bit 5 */
+#define WWDG_CFR_W6 ((uint16_t)0x0040) /*!<Bit 6 */
+
+#define WWDG_CFR_WDGTB ((uint16_t)0x0180) /*!<WDGTB[1:0] bits (Timer Base) */
+#define WWDG_CFR_WDGTB0 ((uint16_t)0x0080) /*!<Bit 0 */
+#define WWDG_CFR_WDGTB1 ((uint16_t)0x0100) /*!<Bit 1 */
+
+#define WWDG_CFR_EWI ((uint16_t)0x0200) /*!<Early Wakeup Interrupt */
+
+/******************* Bit definition for WWDG_SR register ********************/
+#define WWDG_SR_EWIF ((uint8_t)0x01) /*!<Early Wakeup Interrupt Flag */
+
+
+/******************************************************************************/
+/* */
+/* DBG */
+/* */
+/******************************************************************************/
+/******************** Bit definition for DBGMCU_IDCODE register *************/
+#define DBGMCU_IDCODE_DEV_ID ((uint32_t)0x00000FFF)
+#define DBGMCU_IDCODE_REV_ID ((uint32_t)0xFFFF0000)
+
+/******************** Bit definition for DBGMCU_CR register *****************/
+#define DBGMCU_CR_DBG_SLEEP ((uint32_t)0x00000001)
+#define DBGMCU_CR_DBG_STOP ((uint32_t)0x00000002)
+#define DBGMCU_CR_DBG_STANDBY ((uint32_t)0x00000004)
+#define DBGMCU_CR_TRACE_IOEN ((uint32_t)0x00000020)
+
+#define DBGMCU_CR_TRACE_MODE ((uint32_t)0x000000C0)
+#define DBGMCU_CR_TRACE_MODE_0 ((uint32_t)0x00000040)/*!<Bit 0 */
+#define DBGMCU_CR_TRACE_MODE_1 ((uint32_t)0x00000080)/*!<Bit 1 */
+
+/******************** Bit definition for DBGMCU_APB1_FZ register ************/
+#define DBGMCU_APB1_FZ_DBG_TIM2_STOP ((uint32_t)0x00000001)
+#define DBGMCU_APB1_FZ_DBG_TIM3_STOP ((uint32_t)0x00000002)
+#define DBGMCU_APB1_FZ_DBG_TIM4_STOP ((uint32_t)0x00000004)
+#define DBGMCU_APB1_FZ_DBG_TIM5_STOP ((uint32_t)0x00000008)
+#define DBGMCU_APB1_FZ_DBG_TIM6_STOP ((uint32_t)0x00000010)
+#define DBGMCU_APB1_FZ_DBG_TIM7_STOP ((uint32_t)0x00000020)
+#define DBGMCU_APB1_FZ_DBG_TIM12_STOP ((uint32_t)0x00000040)
+#define DBGMCU_APB1_FZ_DBG_TIM13_STOP ((uint32_t)0x00000080)
+#define DBGMCU_APB1_FZ_DBG_TIM14_STOP ((uint32_t)0x00000100)
+#define DBGMCU_APB1_FZ_DBG_RTC_STOP ((uint32_t)0x00000400)
+#define DBGMCU_APB1_FZ_DBG_WWDG_STOP ((uint32_t)0x00000800)
+#define DBGMCU_APB1_FZ_DBG_IWDEG_STOP ((uint32_t)0x00001000)
+#define DBGMCU_APB1_FZ_DBG_I2C1_SMBUS_TIMEOUT ((uint32_t)0x00200000)
+#define DBGMCU_APB1_FZ_DBG_I2C2_SMBUS_TIMEOUT ((uint32_t)0x00400000)
+#define DBGMCU_APB1_FZ_DBG_I2C3_SMBUS_TIMEOUT ((uint32_t)0x00800000)
+#define DBGMCU_APB1_FZ_DBG_CAN1_STOP ((uint32_t)0x02000000)
+#define DBGMCU_APB1_FZ_DBG_CAN2_STOP ((uint32_t)0x04000000)
+
+/******************** Bit definition for DBGMCU_APB2_FZ register ************/
+#define DBGMCU_APB1_FZ_DBG_TIM1_STOP ((uint32_t)0x00000001)
+#define DBGMCU_APB1_FZ_DBG_TIM8_STOP ((uint32_t)0x00000002)
+#define DBGMCU_APB1_FZ_DBG_TIM9_STOP ((uint32_t)0x00010000)
+#define DBGMCU_APB1_FZ_DBG_TIM10_STOP ((uint32_t)0x00020000)
+#define DBGMCU_APB1_FZ_DBG_TIM11_STOP ((uint32_t)0x00040000)
+
+/******************************************************************************/
+/* */
+/* Ethernet MAC Registers bits definitions */
+/* */
+/******************************************************************************/
+/* Bit definition for Ethernet MAC Control Register register */
+#define ETH_MACCR_WD ((uint32_t)0x00800000) /* Watchdog disable */
+#define ETH_MACCR_JD ((uint32_t)0x00400000) /* Jabber disable */
+#define ETH_MACCR_IFG ((uint32_t)0x000E0000) /* Inter-frame gap */
+#define ETH_MACCR_IFG_96Bit ((uint32_t)0x00000000) /* Minimum IFG between frames during transmission is 96Bit */
+ #define ETH_MACCR_IFG_88Bit ((uint32_t)0x00020000) /* Minimum IFG between frames during transmission is 88Bit */
+ #define ETH_MACCR_IFG_80Bit ((uint32_t)0x00040000) /* Minimum IFG between frames during transmission is 80Bit */
+ #define ETH_MACCR_IFG_72Bit ((uint32_t)0x00060000) /* Minimum IFG between frames during transmission is 72Bit */
+ #define ETH_MACCR_IFG_64Bit ((uint32_t)0x00080000) /* Minimum IFG between frames during transmission is 64Bit */
+ #define ETH_MACCR_IFG_56Bit ((uint32_t)0x000A0000) /* Minimum IFG between frames during transmission is 56Bit */
+ #define ETH_MACCR_IFG_48Bit ((uint32_t)0x000C0000) /* Minimum IFG between frames during transmission is 48Bit */
+ #define ETH_MACCR_IFG_40Bit ((uint32_t)0x000E0000) /* Minimum IFG between frames during transmission is 40Bit */
+#define ETH_MACCR_CSD ((uint32_t)0x00010000) /* Carrier sense disable (during transmission) */
+#define ETH_MACCR_FES ((uint32_t)0x00004000) /* Fast ethernet speed */
+#define ETH_MACCR_ROD ((uint32_t)0x00002000) /* Receive own disable */
+#define ETH_MACCR_LM ((uint32_t)0x00001000) /* loopback mode */
+#define ETH_MACCR_DM ((uint32_t)0x00000800) /* Duplex mode */
+#define ETH_MACCR_IPCO ((uint32_t)0x00000400) /* IP Checksum offload */
+#define ETH_MACCR_RD ((uint32_t)0x00000200) /* Retry disable */
+#define ETH_MACCR_APCS ((uint32_t)0x00000080) /* Automatic Pad/CRC stripping */
+#define ETH_MACCR_BL ((uint32_t)0x00000060) /* Back-off limit: random integer number (r) of slot time delays before rescheduling
+ a transmission attempt during retries after a collision: 0 =< r <2^k */
+ #define ETH_MACCR_BL_10 ((uint32_t)0x00000000) /* k = min (n, 10) */
+ #define ETH_MACCR_BL_8 ((uint32_t)0x00000020) /* k = min (n, 8) */
+ #define ETH_MACCR_BL_4 ((uint32_t)0x00000040) /* k = min (n, 4) */
+ #define ETH_MACCR_BL_1 ((uint32_t)0x00000060) /* k = min (n, 1) */
+#define ETH_MACCR_DC ((uint32_t)0x00000010) /* Defferal check */
+#define ETH_MACCR_TE ((uint32_t)0x00000008) /* Transmitter enable */
+#define ETH_MACCR_RE ((uint32_t)0x00000004) /* Receiver enable */
+
+/* Bit definition for Ethernet MAC Frame Filter Register */
+#define ETH_MACFFR_RA ((uint32_t)0x80000000) /* Receive all */
+#define ETH_MACFFR_HPF ((uint32_t)0x00000400) /* Hash or perfect filter */
+#define ETH_MACFFR_SAF ((uint32_t)0x00000200) /* Source address filter enable */
+#define ETH_MACFFR_SAIF ((uint32_t)0x00000100) /* SA inverse filtering */
+#define ETH_MACFFR_PCF ((uint32_t)0x000000C0) /* Pass control frames: 3 cases */
+ #define ETH_MACFFR_PCF_BlockAll ((uint32_t)0x00000040) /* MAC filters all control frames from reaching the application */
+ #define ETH_MACFFR_PCF_ForwardAll ((uint32_t)0x00000080) /* MAC forwards all control frames to application even if they fail the Address Filter */
+ #define ETH_MACFFR_PCF_ForwardPassedAddrFilter ((uint32_t)0x000000C0) /* MAC forwards control frames that pass the Address Filter. */
+#define ETH_MACFFR_BFD ((uint32_t)0x00000020) /* Broadcast frame disable */
+#define ETH_MACFFR_PAM ((uint32_t)0x00000010) /* Pass all mutlicast */
+#define ETH_MACFFR_DAIF ((uint32_t)0x00000008) /* DA Inverse filtering */
+#define ETH_MACFFR_HM ((uint32_t)0x00000004) /* Hash multicast */
+#define ETH_MACFFR_HU ((uint32_t)0x00000002) /* Hash unicast */
+#define ETH_MACFFR_PM ((uint32_t)0x00000001) /* Promiscuous mode */
+
+/* Bit definition for Ethernet MAC Hash Table High Register */
+#define ETH_MACHTHR_HTH ((uint32_t)0xFFFFFFFF) /* Hash table high */
+
+/* Bit definition for Ethernet MAC Hash Table Low Register */
+#define ETH_MACHTLR_HTL ((uint32_t)0xFFFFFFFF) /* Hash table low */
+
+/* Bit definition for Ethernet MAC MII Address Register */
+#define ETH_MACMIIAR_PA ((uint32_t)0x0000F800) /* Physical layer address */
+#define ETH_MACMIIAR_MR ((uint32_t)0x000007C0) /* MII register in the selected PHY */
+#define ETH_MACMIIAR_CR ((uint32_t)0x0000001C) /* CR clock range: 6 cases */
+ #define ETH_MACMIIAR_CR_Div42 ((uint32_t)0x00000000) /* HCLK:60-100 MHz; MDC clock= HCLK/42 */
+ #define ETH_MACMIIAR_CR_Div62 ((uint32_t)0x00000004) /* HCLK:100-120 MHz; MDC clock= HCLK/62 */
+ #define ETH_MACMIIAR_CR_Div16 ((uint32_t)0x00000008) /* HCLK:20-35 MHz; MDC clock= HCLK/16 */
+ #define ETH_MACMIIAR_CR_Div26 ((uint32_t)0x0000000C) /* HCLK:35-60 MHz; MDC clock= HCLK/42 */
+#define ETH_MACMIIAR_MW ((uint32_t)0x00000002) /* MII write */
+#define ETH_MACMIIAR_MB ((uint32_t)0x00000001) /* MII busy */
+
+/* Bit definition for Ethernet MAC MII Data Register */
+#define ETH_MACMIIDR_MD ((uint32_t)0x0000FFFF) /* MII data: read/write data from/to PHY */
+
+/* Bit definition for Ethernet MAC Flow Control Register */
+#define ETH_MACFCR_PT ((uint32_t)0xFFFF0000) /* Pause time */
+#define ETH_MACFCR_ZQPD ((uint32_t)0x00000080) /* Zero-quanta pause disable */
+#define ETH_MACFCR_PLT ((uint32_t)0x00000030) /* Pause low threshold: 4 cases */
+ #define ETH_MACFCR_PLT_Minus4 ((uint32_t)0x00000000) /* Pause time minus 4 slot times */
+ #define ETH_MACFCR_PLT_Minus28 ((uint32_t)0x00000010) /* Pause time minus 28 slot times */
+ #define ETH_MACFCR_PLT_Minus144 ((uint32_t)0x00000020) /* Pause time minus 144 slot times */
+ #define ETH_MACFCR_PLT_Minus256 ((uint32_t)0x00000030) /* Pause time minus 256 slot times */
+#define ETH_MACFCR_UPFD ((uint32_t)0x00000008) /* Unicast pause frame detect */
+#define ETH_MACFCR_RFCE ((uint32_t)0x00000004) /* Receive flow control enable */
+#define ETH_MACFCR_TFCE ((uint32_t)0x00000002) /* Transmit flow control enable */
+#define ETH_MACFCR_FCBBPA ((uint32_t)0x00000001) /* Flow control busy/backpressure activate */
+
+/* Bit definition for Ethernet MAC VLAN Tag Register */
+#define ETH_MACVLANTR_VLANTC ((uint32_t)0x00010000) /* 12-bit VLAN tag comparison */
+#define ETH_MACVLANTR_VLANTI ((uint32_t)0x0000FFFF) /* VLAN tag identifier (for receive frames) */
+
+/* Bit definition for Ethernet MAC Remote Wake-UpFrame Filter Register */
+#define ETH_MACRWUFFR_D ((uint32_t)0xFFFFFFFF) /* Wake-up frame filter register data */
+/* Eight sequential Writes to this address (offset 0x28) will write all Wake-UpFrame Filter Registers.
+ Eight sequential Reads from this address (offset 0x28) will read all Wake-UpFrame Filter Registers. */
+/* Wake-UpFrame Filter Reg0 : Filter 0 Byte Mask
+ Wake-UpFrame Filter Reg1 : Filter 1 Byte Mask
+ Wake-UpFrame Filter Reg2 : Filter 2 Byte Mask
+ Wake-UpFrame Filter Reg3 : Filter 3 Byte Mask
+ Wake-UpFrame Filter Reg4 : RSVD - Filter3 Command - RSVD - Filter2 Command -
+ RSVD - Filter1 Command - RSVD - Filter0 Command
+ Wake-UpFrame Filter Re5 : Filter3 Offset - Filter2 Offset - Filter1 Offset - Filter0 Offset
+ Wake-UpFrame Filter Re6 : Filter1 CRC16 - Filter0 CRC16
+ Wake-UpFrame Filter Re7 : Filter3 CRC16 - Filter2 CRC16 */
+
+/* Bit definition for Ethernet MAC PMT Control and Status Register */
+#define ETH_MACPMTCSR_WFFRPR ((uint32_t)0x80000000) /* Wake-Up Frame Filter Register Pointer Reset */
+#define ETH_MACPMTCSR_GU ((uint32_t)0x00000200) /* Global Unicast */
+#define ETH_MACPMTCSR_WFR ((uint32_t)0x00000040) /* Wake-Up Frame Received */
+#define ETH_MACPMTCSR_MPR ((uint32_t)0x00000020) /* Magic Packet Received */
+#define ETH_MACPMTCSR_WFE ((uint32_t)0x00000004) /* Wake-Up Frame Enable */
+#define ETH_MACPMTCSR_MPE ((uint32_t)0x00000002) /* Magic Packet Enable */
+#define ETH_MACPMTCSR_PD ((uint32_t)0x00000001) /* Power Down */
+
+/* Bit definition for Ethernet MAC Status Register */
+#define ETH_MACSR_TSTS ((uint32_t)0x00000200) /* Time stamp trigger status */
+#define ETH_MACSR_MMCTS ((uint32_t)0x00000040) /* MMC transmit status */
+#define ETH_MACSR_MMMCRS ((uint32_t)0x00000020) /* MMC receive status */
+#define ETH_MACSR_MMCS ((uint32_t)0x00000010) /* MMC status */
+#define ETH_MACSR_PMTS ((uint32_t)0x00000008) /* PMT status */
+
+/* Bit definition for Ethernet MAC Interrupt Mask Register */
+#define ETH_MACIMR_TSTIM ((uint32_t)0x00000200) /* Time stamp trigger interrupt mask */
+#define ETH_MACIMR_PMTIM ((uint32_t)0x00000008) /* PMT interrupt mask */
+
+/* Bit definition for Ethernet MAC Address0 High Register */
+#define ETH_MACA0HR_MACA0H ((uint32_t)0x0000FFFF) /* MAC address0 high */
+
+/* Bit definition for Ethernet MAC Address0 Low Register */
+#define ETH_MACA0LR_MACA0L ((uint32_t)0xFFFFFFFF) /* MAC address0 low */
+
+/* Bit definition for Ethernet MAC Address1 High Register */
+#define ETH_MACA1HR_AE ((uint32_t)0x80000000) /* Address enable */
+#define ETH_MACA1HR_SA ((uint32_t)0x40000000) /* Source address */
+#define ETH_MACA1HR_MBC ((uint32_t)0x3F000000) /* Mask byte control: bits to mask for comparison of the MAC Address bytes */
+ #define ETH_MACA1HR_MBC_HBits15_8 ((uint32_t)0x20000000) /* Mask MAC Address high reg bits [15:8] */
+ #define ETH_MACA1HR_MBC_HBits7_0 ((uint32_t)0x10000000) /* Mask MAC Address high reg bits [7:0] */
+ #define ETH_MACA1HR_MBC_LBits31_24 ((uint32_t)0x08000000) /* Mask MAC Address low reg bits [31:24] */
+ #define ETH_MACA1HR_MBC_LBits23_16 ((uint32_t)0x04000000) /* Mask MAC Address low reg bits [23:16] */
+ #define ETH_MACA1HR_MBC_LBits15_8 ((uint32_t)0x02000000) /* Mask MAC Address low reg bits [15:8] */
+ #define ETH_MACA1HR_MBC_LBits7_0 ((uint32_t)0x01000000) /* Mask MAC Address low reg bits [7:0] */
+#define ETH_MACA1HR_MACA1H ((uint32_t)0x0000FFFF) /* MAC address1 high */
+
+/* Bit definition for Ethernet MAC Address1 Low Register */
+#define ETH_MACA1LR_MACA1L ((uint32_t)0xFFFFFFFF) /* MAC address1 low */
+
+/* Bit definition for Ethernet MAC Address2 High Register */
+#define ETH_MACA2HR_AE ((uint32_t)0x80000000) /* Address enable */
+#define ETH_MACA2HR_SA ((uint32_t)0x40000000) /* Source address */
+#define ETH_MACA2HR_MBC ((uint32_t)0x3F000000) /* Mask byte control */
+ #define ETH_MACA2HR_MBC_HBits15_8 ((uint32_t)0x20000000) /* Mask MAC Address high reg bits [15:8] */
+ #define ETH_MACA2HR_MBC_HBits7_0 ((uint32_t)0x10000000) /* Mask MAC Address high reg bits [7:0] */
+ #define ETH_MACA2HR_MBC_LBits31_24 ((uint32_t)0x08000000) /* Mask MAC Address low reg bits [31:24] */
+ #define ETH_MACA2HR_MBC_LBits23_16 ((uint32_t)0x04000000) /* Mask MAC Address low reg bits [23:16] */
+ #define ETH_MACA2HR_MBC_LBits15_8 ((uint32_t)0x02000000) /* Mask MAC Address low reg bits [15:8] */
+ #define ETH_MACA2HR_MBC_LBits7_0 ((uint32_t)0x01000000) /* Mask MAC Address low reg bits [70] */
+#define ETH_MACA2HR_MACA2H ((uint32_t)0x0000FFFF) /* MAC address1 high */
+
+/* Bit definition for Ethernet MAC Address2 Low Register */
+#define ETH_MACA2LR_MACA2L ((uint32_t)0xFFFFFFFF) /* MAC address2 low */
+
+/* Bit definition for Ethernet MAC Address3 High Register */
+#define ETH_MACA3HR_AE ((uint32_t)0x80000000) /* Address enable */
+#define ETH_MACA3HR_SA ((uint32_t)0x40000000) /* Source address */
+#define ETH_MACA3HR_MBC ((uint32_t)0x3F000000) /* Mask byte control */
+ #define ETH_MACA3HR_MBC_HBits15_8 ((uint32_t)0x20000000) /* Mask MAC Address high reg bits [15:8] */
+ #define ETH_MACA3HR_MBC_HBits7_0 ((uint32_t)0x10000000) /* Mask MAC Address high reg bits [7:0] */
+ #define ETH_MACA3HR_MBC_LBits31_24 ((uint32_t)0x08000000) /* Mask MAC Address low reg bits [31:24] */
+ #define ETH_MACA3HR_MBC_LBits23_16 ((uint32_t)0x04000000) /* Mask MAC Address low reg bits [23:16] */
+ #define ETH_MACA3HR_MBC_LBits15_8 ((uint32_t)0x02000000) /* Mask MAC Address low reg bits [15:8] */
+ #define ETH_MACA3HR_MBC_LBits7_0 ((uint32_t)0x01000000) /* Mask MAC Address low reg bits [70] */
+#define ETH_MACA3HR_MACA3H ((uint32_t)0x0000FFFF) /* MAC address3 high */
+
+/* Bit definition for Ethernet MAC Address3 Low Register */
+#define ETH_MACA3LR_MACA3L ((uint32_t)0xFFFFFFFF) /* MAC address3 low */
+
+/******************************************************************************/
+/* Ethernet MMC Registers bits definition */
+/******************************************************************************/
+
+/* Bit definition for Ethernet MMC Contol Register */
+#define ETH_MMCCR_MCFHP ((uint32_t)0x00000020) /* MMC counter Full-Half preset (Only in STM32F2xx) */
+#define ETH_MMCCR_MCP ((uint32_t)0x00000010) /* MMC counter preset (Only in STM32F2xx) */
+#define ETH_MMCCR_MCF ((uint32_t)0x00000008) /* MMC Counter Freeze */
+#define ETH_MMCCR_ROR ((uint32_t)0x00000004) /* Reset on Read */
+#define ETH_MMCCR_CSR ((uint32_t)0x00000002) /* Counter Stop Rollover */
+#define ETH_MMCCR_CR ((uint32_t)0x00000001) /* Counters Reset */
+
+/* Bit definition for Ethernet MMC Receive Interrupt Register */
+#define ETH_MMCRIR_RGUFS ((uint32_t)0x00020000) /* Set when Rx good unicast frames counter reaches half the maximum value */
+#define ETH_MMCRIR_RFAES ((uint32_t)0x00000040) /* Set when Rx alignment error counter reaches half the maximum value */
+#define ETH_MMCRIR_RFCES ((uint32_t)0x00000020) /* Set when Rx crc error counter reaches half the maximum value */
+
+/* Bit definition for Ethernet MMC Transmit Interrupt Register */
+#define ETH_MMCTIR_TGFS ((uint32_t)0x00200000) /* Set when Tx good frame count counter reaches half the maximum value */
+#define ETH_MMCTIR_TGFMSCS ((uint32_t)0x00008000) /* Set when Tx good multi col counter reaches half the maximum value */
+#define ETH_MMCTIR_TGFSCS ((uint32_t)0x00004000) /* Set when Tx good single col counter reaches half the maximum value */
+
+/* Bit definition for Ethernet MMC Receive Interrupt Mask Register */
+#define ETH_MMCRIMR_RGUFM ((uint32_t)0x00020000) /* Mask the interrupt when Rx good unicast frames counter reaches half the maximum value */
+#define ETH_MMCRIMR_RFAEM ((uint32_t)0x00000040) /* Mask the interrupt when when Rx alignment error counter reaches half the maximum value */
+#define ETH_MMCRIMR_RFCEM ((uint32_t)0x00000020) /* Mask the interrupt when Rx crc error counter reaches half the maximum value */
+
+/* Bit definition for Ethernet MMC Transmit Interrupt Mask Register */
+#define ETH_MMCTIMR_TGFM ((uint32_t)0x00200000) /* Mask the interrupt when Tx good frame count counter reaches half the maximum value */
+#define ETH_MMCTIMR_TGFMSCM ((uint32_t)0x00008000) /* Mask the interrupt when Tx good multi col counter reaches half the maximum value */
+#define ETH_MMCTIMR_TGFSCM ((uint32_t)0x00004000) /* Mask the interrupt when Tx good single col counter reaches half the maximum value */
+
+/* Bit definition for Ethernet MMC Transmitted Good Frames after Single Collision Counter Register */
+#define ETH_MMCTGFSCCR_TGFSCC ((uint32_t)0xFFFFFFFF) /* Number of successfully transmitted frames after a single collision in Half-duplex mode. */
+
+/* Bit definition for Ethernet MMC Transmitted Good Frames after More than a Single Collision Counter Register */
+#define ETH_MMCTGFMSCCR_TGFMSCC ((uint32_t)0xFFFFFFFF) /* Number of successfully transmitted frames after more than a single collision in Half-duplex mode. */
+
+/* Bit definition for Ethernet MMC Transmitted Good Frames Counter Register */
+#define ETH_MMCTGFCR_TGFC ((uint32_t)0xFFFFFFFF) /* Number of good frames transmitted. */
+
+/* Bit definition for Ethernet MMC Received Frames with CRC Error Counter Register */
+#define ETH_MMCRFCECR_RFCEC ((uint32_t)0xFFFFFFFF) /* Number of frames received with CRC error. */
+
+/* Bit definition for Ethernet MMC Received Frames with Alignement Error Counter Register */
+#define ETH_MMCRFAECR_RFAEC ((uint32_t)0xFFFFFFFF) /* Number of frames received with alignment (dribble) error */
+
+/* Bit definition for Ethernet MMC Received Good Unicast Frames Counter Register */
+#define ETH_MMCRGUFCR_RGUFC ((uint32_t)0xFFFFFFFF) /* Number of good unicast frames received. */
+
+/******************************************************************************/
+/* Ethernet PTP Registers bits definition */
+/******************************************************************************/
+
+/* Bit definition for Ethernet PTP Time Stamp Contol Register */
+#define ETH_PTPTSCR_TSCNT ((uint32_t)0x00030000) /* Time stamp clock node type */
+#define ETH_PTPTSSR_TSSMRME ((uint32_t)0x00008000) /* Time stamp snapshot for message relevant to master enable */
+#define ETH_PTPTSSR_TSSEME ((uint32_t)0x00004000) /* Time stamp snapshot for event message enable */
+#define ETH_PTPTSSR_TSSIPV4FE ((uint32_t)0x00002000) /* Time stamp snapshot for IPv4 frames enable */
+#define ETH_PTPTSSR_TSSIPV6FE ((uint32_t)0x00001000) /* Time stamp snapshot for IPv6 frames enable */
+#define ETH_PTPTSSR_TSSPTPOEFE ((uint32_t)0x00000800) /* Time stamp snapshot for PTP over ethernet frames enable */
+#define ETH_PTPTSSR_TSPTPPSV2E ((uint32_t)0x00000400) /* Time stamp PTP packet snooping for version2 format enable */
+#define ETH_PTPTSSR_TSSSR ((uint32_t)0x00000200) /* Time stamp Sub-seconds rollover */
+#define ETH_PTPTSSR_TSSARFE ((uint32_t)0x00000100) /* Time stamp snapshot for all received frames enable */
+
+#define ETH_PTPTSCR_TSARU ((uint32_t)0x00000020) /* Addend register update */
+#define ETH_PTPTSCR_TSITE ((uint32_t)0x00000010) /* Time stamp interrupt trigger enable */
+#define ETH_PTPTSCR_TSSTU ((uint32_t)0x00000008) /* Time stamp update */
+#define ETH_PTPTSCR_TSSTI ((uint32_t)0x00000004) /* Time stamp initialize */
+#define ETH_PTPTSCR_TSFCU ((uint32_t)0x00000002) /* Time stamp fine or coarse update */
+#define ETH_PTPTSCR_TSE ((uint32_t)0x00000001) /* Time stamp enable */
+
+/* Bit definition for Ethernet PTP Sub-Second Increment Register */
+#define ETH_PTPSSIR_STSSI ((uint32_t)0x000000FF) /* System time Sub-second increment value */
+
+/* Bit definition for Ethernet PTP Time Stamp High Register */
+#define ETH_PTPTSHR_STS ((uint32_t)0xFFFFFFFF) /* System Time second */
+
+/* Bit definition for Ethernet PTP Time Stamp Low Register */
+#define ETH_PTPTSLR_STPNS ((uint32_t)0x80000000) /* System Time Positive or negative time */
+#define ETH_PTPTSLR_STSS ((uint32_t)0x7FFFFFFF) /* System Time sub-seconds */
+
+/* Bit definition for Ethernet PTP Time Stamp High Update Register */
+#define ETH_PTPTSHUR_TSUS ((uint32_t)0xFFFFFFFF) /* Time stamp update seconds */
+
+/* Bit definition for Ethernet PTP Time Stamp Low Update Register */
+#define ETH_PTPTSLUR_TSUPNS ((uint32_t)0x80000000) /* Time stamp update Positive or negative time */
+#define ETH_PTPTSLUR_TSUSS ((uint32_t)0x7FFFFFFF) /* Time stamp update sub-seconds */
+
+/* Bit definition for Ethernet PTP Time Stamp Addend Register */
+#define ETH_PTPTSAR_TSA ((uint32_t)0xFFFFFFFF) /* Time stamp addend */
+
+/* Bit definition for Ethernet PTP Target Time High Register */
+#define ETH_PTPTTHR_TTSH ((uint32_t)0xFFFFFFFF) /* Target time stamp high */
+
+/* Bit definition for Ethernet PTP Target Time Low Register */
+#define ETH_PTPTTLR_TTSL ((uint32_t)0xFFFFFFFF) /* Target time stamp low */
+
+/* Bit definition for Ethernet PTP Time Stamp Status Register */
+#define ETH_PTPTSSR_TSTTR ((uint32_t)0x00000020) /* Time stamp target time reached */
+#define ETH_PTPTSSR_TSSO ((uint32_t)0x00000010) /* Time stamp seconds overflow */
+
+/******************************************************************************/
+/* Ethernet DMA Registers bits definition */
+/******************************************************************************/
+
+/* Bit definition for Ethernet DMA Bus Mode Register */
+#define ETH_DMABMR_AAB ((uint32_t)0x02000000) /* Address-Aligned beats */
+#define ETH_DMABMR_FPM ((uint32_t)0x01000000) /* 4xPBL mode */
+#define ETH_DMABMR_USP ((uint32_t)0x00800000) /* Use separate PBL */
+#define ETH_DMABMR_RDP ((uint32_t)0x007E0000) /* RxDMA PBL */
+ #define ETH_DMABMR_RDP_1Beat ((uint32_t)0x00020000) /* maximum number of beats to be transferred in one RxDMA transaction is 1 */
+ #define ETH_DMABMR_RDP_2Beat ((uint32_t)0x00040000) /* maximum number of beats to be transferred in one RxDMA transaction is 2 */
+ #define ETH_DMABMR_RDP_4Beat ((uint32_t)0x00080000) /* maximum number of beats to be transferred in one RxDMA transaction is 4 */
+ #define ETH_DMABMR_RDP_8Beat ((uint32_t)0x00100000) /* maximum number of beats to be transferred in one RxDMA transaction is 8 */
+ #define ETH_DMABMR_RDP_16Beat ((uint32_t)0x00200000) /* maximum number of beats to be transferred in one RxDMA transaction is 16 */
+ #define ETH_DMABMR_RDP_32Beat ((uint32_t)0x00400000) /* maximum number of beats to be transferred in one RxDMA transaction is 32 */
+ #define ETH_DMABMR_RDP_4xPBL_4Beat ((uint32_t)0x01020000) /* maximum number of beats to be transferred in one RxDMA transaction is 4 */
+ #define ETH_DMABMR_RDP_4xPBL_8Beat ((uint32_t)0x01040000) /* maximum number of beats to be transferred in one RxDMA transaction is 8 */
+ #define ETH_DMABMR_RDP_4xPBL_16Beat ((uint32_t)0x01080000) /* maximum number of beats to be transferred in one RxDMA transaction is 16 */
+ #define ETH_DMABMR_RDP_4xPBL_32Beat ((uint32_t)0x01100000) /* maximum number of beats to be transferred in one RxDMA transaction is 32 */
+ #define ETH_DMABMR_RDP_4xPBL_64Beat ((uint32_t)0x01200000) /* maximum number of beats to be transferred in one RxDMA transaction is 64 */
+ #define ETH_DMABMR_RDP_4xPBL_128Beat ((uint32_t)0x01400000) /* maximum number of beats to be transferred in one RxDMA transaction is 128 */
+#define ETH_DMABMR_FB ((uint32_t)0x00010000) /* Fixed Burst */
+#define ETH_DMABMR_RTPR ((uint32_t)0x0000C000) /* Rx Tx priority ratio */
+ #define ETH_DMABMR_RTPR_1_1 ((uint32_t)0x00000000) /* Rx Tx priority ratio */
+ #define ETH_DMABMR_RTPR_2_1 ((uint32_t)0x00004000) /* Rx Tx priority ratio */
+ #define ETH_DMABMR_RTPR_3_1 ((uint32_t)0x00008000) /* Rx Tx priority ratio */
+ #define ETH_DMABMR_RTPR_4_1 ((uint32_t)0x0000C000) /* Rx Tx priority ratio */
+#define ETH_DMABMR_PBL ((uint32_t)0x00003F00) /* Programmable burst length */
+ #define ETH_DMABMR_PBL_1Beat ((uint32_t)0x00000100) /* maximum number of beats to be transferred in one TxDMA (or both) transaction is 1 */
+ #define ETH_DMABMR_PBL_2Beat ((uint32_t)0x00000200) /* maximum number of beats to be transferred in one TxDMA (or both) transaction is 2 */
+ #define ETH_DMABMR_PBL_4Beat ((uint32_t)0x00000400) /* maximum number of beats to be transferred in one TxDMA (or both) transaction is 4 */
+ #define ETH_DMABMR_PBL_8Beat ((uint32_t)0x00000800) /* maximum number of beats to be transferred in one TxDMA (or both) transaction is 8 */
+ #define ETH_DMABMR_PBL_16Beat ((uint32_t)0x00001000) /* maximum number of beats to be transferred in one TxDMA (or both) transaction is 16 */
+ #define ETH_DMABMR_PBL_32Beat ((uint32_t)0x00002000) /* maximum number of beats to be transferred in one TxDMA (or both) transaction is 32 */
+ #define ETH_DMABMR_PBL_4xPBL_4Beat ((uint32_t)0x01000100) /* maximum number of beats to be transferred in one TxDMA (or both) transaction is 4 */
+ #define ETH_DMABMR_PBL_4xPBL_8Beat ((uint32_t)0x01000200) /* maximum number of beats to be transferred in one TxDMA (or both) transaction is 8 */
+ #define ETH_DMABMR_PBL_4xPBL_16Beat ((uint32_t)0x01000400) /* maximum number of beats to be transferred in one TxDMA (or both) transaction is 16 */
+ #define ETH_DMABMR_PBL_4xPBL_32Beat ((uint32_t)0x01000800) /* maximum number of beats to be transferred in one TxDMA (or both) transaction is 32 */
+ #define ETH_DMABMR_PBL_4xPBL_64Beat ((uint32_t)0x01001000) /* maximum number of beats to be transferred in one TxDMA (or both) transaction is 64 */
+ #define ETH_DMABMR_PBL_4xPBL_128Beat ((uint32_t)0x01002000) /* maximum number of beats to be transferred in one TxDMA (or both) transaction is 128 */
+#define ETH_DMABMR_EDE ((uint32_t)0x00000080) /* Enhanced Descriptor Enable */
+#define ETH_DMABMR_DSL ((uint32_t)0x0000007C) /* Descriptor Skip Length */
+#define ETH_DMABMR_DA ((uint32_t)0x00000002) /* DMA arbitration scheme */
+#define ETH_DMABMR_SR ((uint32_t)0x00000001) /* Software reset */
+
+/* Bit definition for Ethernet DMA Transmit Poll Demand Register */
+#define ETH_DMATPDR_TPD ((uint32_t)0xFFFFFFFF) /* Transmit poll demand */
+
+/* Bit definition for Ethernet DMA Receive Poll Demand Register */
+#define ETH_DMARPDR_RPD ((uint32_t)0xFFFFFFFF) /* Receive poll demand */
+
+/* Bit definition for Ethernet DMA Receive Descriptor List Address Register */
+#define ETH_DMARDLAR_SRL ((uint32_t)0xFFFFFFFF) /* Start of receive list */
+
+/* Bit definition for Ethernet DMA Transmit Descriptor List Address Register */
+#define ETH_DMATDLAR_STL ((uint32_t)0xFFFFFFFF) /* Start of transmit list */
+
+/* Bit definition for Ethernet DMA Status Register */
+#define ETH_DMASR_TSTS ((uint32_t)0x20000000) /* Time-stamp trigger status */
+#define ETH_DMASR_PMTS ((uint32_t)0x10000000) /* PMT status */
+#define ETH_DMASR_MMCS ((uint32_t)0x08000000) /* MMC status */
+#define ETH_DMASR_EBS ((uint32_t)0x03800000) /* Error bits status */
+ /* combination with EBS[2:0] for GetFlagStatus function */
+ #define ETH_DMASR_EBS_DescAccess ((uint32_t)0x02000000) /* Error bits 0-data buffer, 1-desc. access */
+ #define ETH_DMASR_EBS_ReadTransf ((uint32_t)0x01000000) /* Error bits 0-write trnsf, 1-read transfr */
+ #define ETH_DMASR_EBS_DataTransfTx ((uint32_t)0x00800000) /* Error bits 0-Rx DMA, 1-Tx DMA */
+#define ETH_DMASR_TPS ((uint32_t)0x00700000) /* Transmit process state */
+ #define ETH_DMASR_TPS_Stopped ((uint32_t)0x00000000) /* Stopped - Reset or Stop Tx Command issued */
+ #define ETH_DMASR_TPS_Fetching ((uint32_t)0x00100000) /* Running - fetching the Tx descriptor */
+ #define ETH_DMASR_TPS_Waiting ((uint32_t)0x00200000) /* Running - waiting for status */
+ #define ETH_DMASR_TPS_Reading ((uint32_t)0x00300000) /* Running - reading the data from host memory */
+ #define ETH_DMASR_TPS_Suspended ((uint32_t)0x00600000) /* Suspended - Tx Descriptor unavailabe */
+ #define ETH_DMASR_TPS_Closing ((uint32_t)0x00700000) /* Running - closing Rx descriptor */
+#define ETH_DMASR_RPS ((uint32_t)0x000E0000) /* Receive process state */
+ #define ETH_DMASR_RPS_Stopped ((uint32_t)0x00000000) /* Stopped - Reset or Stop Rx Command issued */
+ #define ETH_DMASR_RPS_Fetching ((uint32_t)0x00020000) /* Running - fetching the Rx descriptor */
+ #define ETH_DMASR_RPS_Waiting ((uint32_t)0x00060000) /* Running - waiting for packet */
+ #define ETH_DMASR_RPS_Suspended ((uint32_t)0x00080000) /* Suspended - Rx Descriptor unavailable */
+ #define ETH_DMASR_RPS_Closing ((uint32_t)0x000A0000) /* Running - closing descriptor */
+ #define ETH_DMASR_RPS_Queuing ((uint32_t)0x000E0000) /* Running - queuing the recieve frame into host memory */
+#define ETH_DMASR_NIS ((uint32_t)0x00010000) /* Normal interrupt summary */
+#define ETH_DMASR_AIS ((uint32_t)0x00008000) /* Abnormal interrupt summary */
+#define ETH_DMASR_ERS ((uint32_t)0x00004000) /* Early receive status */
+#define ETH_DMASR_FBES ((uint32_t)0x00002000) /* Fatal bus error status */
+#define ETH_DMASR_ETS ((uint32_t)0x00000400) /* Early transmit status */
+#define ETH_DMASR_RWTS ((uint32_t)0x00000200) /* Receive watchdog timeout status */
+#define ETH_DMASR_RPSS ((uint32_t)0x00000100) /* Receive process stopped status */
+#define ETH_DMASR_RBUS ((uint32_t)0x00000080) /* Receive buffer unavailable status */
+#define ETH_DMASR_RS ((uint32_t)0x00000040) /* Receive status */
+#define ETH_DMASR_TUS ((uint32_t)0x00000020) /* Transmit underflow status */
+#define ETH_DMASR_ROS ((uint32_t)0x00000010) /* Receive overflow status */
+#define ETH_DMASR_TJTS ((uint32_t)0x00000008) /* Transmit jabber timeout status */
+#define ETH_DMASR_TBUS ((uint32_t)0x00000004) /* Transmit buffer unavailable status */
+#define ETH_DMASR_TPSS ((uint32_t)0x00000002) /* Transmit process stopped status */
+#define ETH_DMASR_TS ((uint32_t)0x00000001) /* Transmit status */
+
+/* Bit definition for Ethernet DMA Operation Mode Register */
+#define ETH_DMAOMR_DTCEFD ((uint32_t)0x04000000) /* Disable Dropping of TCP/IP checksum error frames */
+#define ETH_DMAOMR_RSF ((uint32_t)0x02000000) /* Receive store and forward */
+#define ETH_DMAOMR_DFRF ((uint32_t)0x01000000) /* Disable flushing of received frames */
+#define ETH_DMAOMR_TSF ((uint32_t)0x00200000) /* Transmit store and forward */
+#define ETH_DMAOMR_FTF ((uint32_t)0x00100000) /* Flush transmit FIFO */
+#define ETH_DMAOMR_TTC ((uint32_t)0x0001C000) /* Transmit threshold control */
+ #define ETH_DMAOMR_TTC_64Bytes ((uint32_t)0x00000000) /* threshold level of the MTL Transmit FIFO is 64 Bytes */
+ #define ETH_DMAOMR_TTC_128Bytes ((uint32_t)0x00004000) /* threshold level of the MTL Transmit FIFO is 128 Bytes */
+ #define ETH_DMAOMR_TTC_192Bytes ((uint32_t)0x00008000) /* threshold level of the MTL Transmit FIFO is 192 Bytes */
+ #define ETH_DMAOMR_TTC_256Bytes ((uint32_t)0x0000C000) /* threshold level of the MTL Transmit FIFO is 256 Bytes */
+ #define ETH_DMAOMR_TTC_40Bytes ((uint32_t)0x00010000) /* threshold level of the MTL Transmit FIFO is 40 Bytes */
+ #define ETH_DMAOMR_TTC_32Bytes ((uint32_t)0x00014000) /* threshold level of the MTL Transmit FIFO is 32 Bytes */
+ #define ETH_DMAOMR_TTC_24Bytes ((uint32_t)0x00018000) /* threshold level of the MTL Transmit FIFO is 24 Bytes */
+ #define ETH_DMAOMR_TTC_16Bytes ((uint32_t)0x0001C000) /* threshold level of the MTL Transmit FIFO is 16 Bytes */
+#define ETH_DMAOMR_ST ((uint32_t)0x00002000) /* Start/stop transmission command */
+#define ETH_DMAOMR_FEF ((uint32_t)0x00000080) /* Forward error frames */
+#define ETH_DMAOMR_FUGF ((uint32_t)0x00000040) /* Forward undersized good frames */
+#define ETH_DMAOMR_RTC ((uint32_t)0x00000018) /* receive threshold control */
+ #define ETH_DMAOMR_RTC_64Bytes ((uint32_t)0x00000000) /* threshold level of the MTL Receive FIFO is 64 Bytes */
+ #define ETH_DMAOMR_RTC_32Bytes ((uint32_t)0x00000008) /* threshold level of the MTL Receive FIFO is 32 Bytes */
+ #define ETH_DMAOMR_RTC_96Bytes ((uint32_t)0x00000010) /* threshold level of the MTL Receive FIFO is 96 Bytes */
+ #define ETH_DMAOMR_RTC_128Bytes ((uint32_t)0x00000018) /* threshold level of the MTL Receive FIFO is 128 Bytes */
+#define ETH_DMAOMR_OSF ((uint32_t)0x00000004) /* operate on second frame */
+#define ETH_DMAOMR_SR ((uint32_t)0x00000002) /* Start/stop receive */
+
+/* Bit definition for Ethernet DMA Interrupt Enable Register */
+#define ETH_DMAIER_NISE ((uint32_t)0x00010000) /* Normal interrupt summary enable */
+#define ETH_DMAIER_AISE ((uint32_t)0x00008000) /* Abnormal interrupt summary enable */
+#define ETH_DMAIER_ERIE ((uint32_t)0x00004000) /* Early receive interrupt enable */
+#define ETH_DMAIER_FBEIE ((uint32_t)0x00002000) /* Fatal bus error interrupt enable */
+#define ETH_DMAIER_ETIE ((uint32_t)0x00000400) /* Early transmit interrupt enable */
+#define ETH_DMAIER_RWTIE ((uint32_t)0x00000200) /* Receive watchdog timeout interrupt enable */
+#define ETH_DMAIER_RPSIE ((uint32_t)0x00000100) /* Receive process stopped interrupt enable */
+#define ETH_DMAIER_RBUIE ((uint32_t)0x00000080) /* Receive buffer unavailable interrupt enable */
+#define ETH_DMAIER_RIE ((uint32_t)0x00000040) /* Receive interrupt enable */
+#define ETH_DMAIER_TUIE ((uint32_t)0x00000020) /* Transmit Underflow interrupt enable */
+#define ETH_DMAIER_ROIE ((uint32_t)0x00000010) /* Receive Overflow interrupt enable */
+#define ETH_DMAIER_TJTIE ((uint32_t)0x00000008) /* Transmit jabber timeout interrupt enable */
+#define ETH_DMAIER_TBUIE ((uint32_t)0x00000004) /* Transmit buffer unavailable interrupt enable */
+#define ETH_DMAIER_TPSIE ((uint32_t)0x00000002) /* Transmit process stopped interrupt enable */
+#define ETH_DMAIER_TIE ((uint32_t)0x00000001) /* Transmit interrupt enable */
+
+/* Bit definition for Ethernet DMA Missed Frame and Buffer Overflow Counter Register */
+#define ETH_DMAMFBOCR_OFOC ((uint32_t)0x10000000) /* Overflow bit for FIFO overflow counter */
+#define ETH_DMAMFBOCR_MFA ((uint32_t)0x0FFE0000) /* Number of frames missed by the application */
+#define ETH_DMAMFBOCR_OMFC ((uint32_t)0x00010000) /* Overflow bit for missed frame counter */
+#define ETH_DMAMFBOCR_MFC ((uint32_t)0x0000FFFF) /* Number of frames missed by the controller */
+
+/* Bit definition for Ethernet DMA Current Host Transmit Descriptor Register */
+#define ETH_DMACHTDR_HTDAP ((uint32_t)0xFFFFFFFF) /* Host transmit descriptor address pointer */
+
+/* Bit definition for Ethernet DMA Current Host Receive Descriptor Register */
+#define ETH_DMACHRDR_HRDAP ((uint32_t)0xFFFFFFFF) /* Host receive descriptor address pointer */
+
+/* Bit definition for Ethernet DMA Current Host Transmit Buffer Address Register */
+#define ETH_DMACHTBAR_HTBAP ((uint32_t)0xFFFFFFFF) /* Host transmit buffer address pointer */
+
+/* Bit definition for Ethernet DMA Current Host Receive Buffer Address Register */
+#define ETH_DMACHRBAR_HRBAP ((uint32_t)0xFFFFFFFF) /* Host receive buffer address pointer */
+
+/**
+ * @}
+ */
+
+ /**
+ * @}
+ */
+
+#ifdef USE_STDPERIPH_DRIVER
+ #include "stm32f2xx_conf.h"
+#endif /* USE_STDPERIPH_DRIVER */
+
+/** @addtogroup Exported_macro
+ * @{
+ */
+
+#define SET_BIT(REG, BIT) ((REG) |= (BIT))
+
+#define CLEAR_BIT(REG, BIT) ((REG) &= ~(BIT))
+
+#define READ_BIT(REG, BIT) ((REG) & (BIT))
+
+#define CLEAR_REG(REG) ((REG) = (0x0))
+
+#define WRITE_REG(REG, VAL) ((REG) = (VAL))
+
+#define READ_REG(REG) ((REG))
+
+#define MODIFY_REG(REG, CLEARMASK, SETMASK) WRITE_REG((REG), (((READ_REG(REG)) & (~(CLEARMASK))) | (SETMASK)))
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif /* __cplusplus */
+
+#endif /* __STM32F2xx_H */
+
+/**
+ * @}
+ */
+
+ /**
+ * @}
+ */
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/os/hal/platforms/STM32L1xx/core_cm3.h b/os/hal/platforms/STM32L1xx/core_cm3.h deleted file mode 100644 index 2e7746f5a..000000000 --- a/os/hal/platforms/STM32L1xx/core_cm3.h +++ /dev/null @@ -1,1843 +0,0 @@ -/*
- ChibiOS/RT - Copyright (C) 2006,2007,2008,2009,2010,
- 2011 Giovanni Di Sirio.
-
- This file is part of ChibiOS/RT.
-
- ChibiOS/RT is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 3 of the License, or
- (at your option) any later version.
-
- ChibiOS/RT is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-
-/*
- * Parts of this files have been modified in ChibiOS/RT in order to fix
- * some code quality issues and conflicting declarations.
- */
-
-/**************************************************************************//**
- * @file core_cm3.h
- * @brief CMSIS Cortex-M3 Core Peripheral Access Layer Header File
- * @version V1.30
- * @date 30. October 2009
- *
- * @note
- * Copyright (C) 2009 ARM Limited. All rights reserved.
- *
- * @par
- * ARM Limited (ARM) is supplying this software for use with Cortex-M
- * processor based microcontrollers. This file can be freely distributed
- * within development tools that are supporting such ARM based processors.
- *
- * @par
- * THIS SOFTWARE IS PROVIDED "AS IS". NO WARRANTIES, WHETHER EXPRESS, IMPLIED
- * OR STATUTORY, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE.
- * ARM SHALL NOT, IN ANY CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR
- * CONSEQUENTIAL DAMAGES, FOR ANY REASON WHATSOEVER.
- *
- ******************************************************************************/
-
-#ifndef __CM3_CORE_H__
-#define __CM3_CORE_H__
-
-/** @addtogroup CMSIS_CM3_core_LintCinfiguration CMSIS CM3 Core Lint Configuration
- *
- * List of Lint messages which will be suppressed and not shown:
- * - Error 10: \n
- * register uint32_t __regBasePri __asm("basepri"); \n
- * Error 10: Expecting ';'
- * .
- * - Error 530: \n
- * return(__regBasePri); \n
- * Warning 530: Symbol '__regBasePri' (line 264) not initialized
- * .
- * - Error 550: \n
- * __regBasePri = (basePri & 0x1ff); \n
- * Warning 550: Symbol '__regBasePri' (line 271) not accessed
- * .
- * - Error 754: \n
- * uint32_t RESERVED0[24]; \n
- * Info 754: local structure member '<some, not used in the HAL>' (line 109, file ./cm3_core.h) not referenced
- * .
- * - Error 750: \n
- * #define __CM3_CORE_H__ \n
- * Info 750: local macro '__CM3_CORE_H__' (line 43, file./cm3_core.h) not referenced
- * .
- * - Error 528: \n
- * static __INLINE void NVIC_DisableIRQ(uint32_t IRQn) \n
- * Warning 528: Symbol 'NVIC_DisableIRQ(unsigned int)' (line 419, file ./cm3_core.h) not referenced
- * .
- * - Error 751: \n
- * } InterruptType_Type; \n
- * Info 751: local typedef 'InterruptType_Type' (line 170, file ./cm3_core.h) not referenced
- * .
- * Note: To re-enable a Message, insert a space before 'lint' *
- *
- */
-
-/*lint -save */
-/*lint -e10 */
-/*lint -e530 */
-/*lint -e550 */
-/*lint -e754 */
-/*lint -e750 */
-/*lint -e528 */
-/*lint -e751 */
-
-
-/** @addtogroup CMSIS_CM3_core_definitions CM3 Core Definitions
- This file defines all structures and symbols for CMSIS core:
- - CMSIS version number
- - Cortex-M core registers and bitfields
- - Cortex-M core peripheral base address
- @{
- */
-
-#ifdef __cplusplus
- extern "C" {
-#endif
-
-#define __CM3_CMSIS_VERSION_MAIN (0x01) /*!< [31:16] CMSIS HAL main version */
-#define __CM3_CMSIS_VERSION_SUB (0x30) /*!< [15:0] CMSIS HAL sub version */
-#define __CM3_CMSIS_VERSION ((__CM3_CMSIS_VERSION_MAIN << 16) | __CM3_CMSIS_VERSION_SUB) /*!< CMSIS HAL version number */
-
-#define __CORTEX_M (0x03) /*!< Cortex core */
-
-#include <stdint.h> /* Include standard types */
-
-#if defined (__ICCARM__)
- #include <intrinsics.h> /* IAR Intrinsics */
-#endif
-
-
-#ifndef __NVIC_PRIO_BITS
- #define __NVIC_PRIO_BITS 4 /*!< standard definition for NVIC Priority Bits */
-#endif
-
-
-
-
-/**
- * IO definitions
- *
- * define access restrictions to peripheral registers
- */
-
-#ifdef __cplusplus
- #define __I volatile /*!< defines 'read only' permissions */
-#else
- #define __I volatile const /*!< defines 'read only' permissions */
-#endif
-#define __O volatile /*!< defines 'write only' permissions */
-#define __IO volatile /*!< defines 'read / write' permissions */
-
-
-
-/*******************************************************************************
- * Register Abstraction
- ******************************************************************************/
-/** @addtogroup CMSIS_CM3_core_register CMSIS CM3 Core Register
- @{
-*/
-
-
-/** @addtogroup CMSIS_CM3_NVIC CMSIS CM3 NVIC
- memory mapped structure for Nested Vectored Interrupt Controller (NVIC)
- @{
- */
-typedef struct
-{
- __IO uint32_t ISER[8]; /*!< Offset: 0x000 Interrupt Set Enable Register */
- uint32_t RESERVED0[24];
- __IO uint32_t ICER[8]; /*!< Offset: 0x080 Interrupt Clear Enable Register */
- uint32_t RSERVED1[24];
- __IO uint32_t ISPR[8]; /*!< Offset: 0x100 Interrupt Set Pending Register */
- uint32_t RESERVED2[24];
- __IO uint32_t ICPR[8]; /*!< Offset: 0x180 Interrupt Clear Pending Register */
- uint32_t RESERVED3[24];
- __IO uint32_t IABR[8]; /*!< Offset: 0x200 Interrupt Active bit Register */
- uint32_t RESERVED4[56];
- __IO uint8_t IP[240]; /*!< Offset: 0x300 Interrupt Priority Register (8Bit wide) */
- uint32_t RESERVED5[644];
- __O uint32_t STIR; /*!< Offset: 0xE00 Software Trigger Interrupt Register */
-} NVIC_Type;
-/*@}*/ /* end of group CMSIS_CM3_NVIC */
-
-
-/** @addtogroup CMSIS_CM3_SCB CMSIS CM3 SCB
- memory mapped structure for System Control Block (SCB)
- @{
- */
-typedef struct
-{
- __I uint32_t CPUID; /*!< Offset: 0x00 CPU ID Base Register */
- __IO uint32_t ICSR; /*!< Offset: 0x04 Interrupt Control State Register */
- __IO uint32_t VTOR; /*!< Offset: 0x08 Vector Table Offset Register */
- __IO uint32_t AIRCR; /*!< Offset: 0x0C Application Interrupt / Reset Control Register */
- __IO uint32_t SCR; /*!< Offset: 0x10 System Control Register */
- __IO uint32_t CCR; /*!< Offset: 0x14 Configuration Control Register */
- __IO uint8_t SHP[12]; /*!< Offset: 0x18 System Handlers Priority Registers (4-7, 8-11, 12-15) */
- __IO uint32_t SHCSR; /*!< Offset: 0x24 System Handler Control and State Register */
- __IO uint32_t CFSR; /*!< Offset: 0x28 Configurable Fault Status Register */
- __IO uint32_t HFSR; /*!< Offset: 0x2C Hard Fault Status Register */
- __IO uint32_t DFSR; /*!< Offset: 0x30 Debug Fault Status Register */
- __IO uint32_t MMFAR; /*!< Offset: 0x34 Mem Manage Address Register */
- __IO uint32_t BFAR; /*!< Offset: 0x38 Bus Fault Address Register */
- __IO uint32_t AFSR; /*!< Offset: 0x3C Auxiliary Fault Status Register */
- __I uint32_t PFR[2]; /*!< Offset: 0x40 Processor Feature Register */
- __I uint32_t DFR; /*!< Offset: 0x48 Debug Feature Register */
- __I uint32_t ADR; /*!< Offset: 0x4C Auxiliary Feature Register */
- __I uint32_t MMFR[4]; /*!< Offset: 0x50 Memory Model Feature Register */
- __I uint32_t ISAR[5]; /*!< Offset: 0x60 ISA Feature Register */
-} SCB_Type;
-
-/* SCB CPUID Register Definitions */
-#define SCB_CPUID_IMPLEMENTER_Pos 24 /*!< SCB CPUID: IMPLEMENTER Position */
-#define SCB_CPUID_IMPLEMENTER_Msk (0xFFul << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */
-
-#define SCB_CPUID_VARIANT_Pos 20 /*!< SCB CPUID: VARIANT Position */
-#define SCB_CPUID_VARIANT_Msk (0xFul << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */
-
-#define SCB_CPUID_PARTNO_Pos 4 /*!< SCB CPUID: PARTNO Position */
-#define SCB_CPUID_PARTNO_Msk (0xFFFul << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */
-
-#define SCB_CPUID_REVISION_Pos 0 /*!< SCB CPUID: REVISION Position */
-#define SCB_CPUID_REVISION_Msk (0xFul << SCB_CPUID_REVISION_Pos) /*!< SCB CPUID: REVISION Mask */
-
-/* SCB Interrupt Control State Register Definitions */
-#define SCB_ICSR_NMIPENDSET_Pos 31 /*!< SCB ICSR: NMIPENDSET Position */
-#define SCB_ICSR_NMIPENDSET_Msk (1ul << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */
-
-#define SCB_ICSR_PENDSVSET_Pos 28 /*!< SCB ICSR: PENDSVSET Position */
-#define SCB_ICSR_PENDSVSET_Msk (1ul << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */
-
-#define SCB_ICSR_PENDSVCLR_Pos 27 /*!< SCB ICSR: PENDSVCLR Position */
-#define SCB_ICSR_PENDSVCLR_Msk (1ul << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */
-
-#define SCB_ICSR_PENDSTSET_Pos 26 /*!< SCB ICSR: PENDSTSET Position */
-#define SCB_ICSR_PENDSTSET_Msk (1ul << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */
-
-#define SCB_ICSR_PENDSTCLR_Pos 25 /*!< SCB ICSR: PENDSTCLR Position */
-#define SCB_ICSR_PENDSTCLR_Msk (1ul << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */
-
-#define SCB_ICSR_ISRPREEMPT_Pos 23 /*!< SCB ICSR: ISRPREEMPT Position */
-#define SCB_ICSR_ISRPREEMPT_Msk (1ul << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */
-
-#define SCB_ICSR_ISRPENDING_Pos 22 /*!< SCB ICSR: ISRPENDING Position */
-#define SCB_ICSR_ISRPENDING_Msk (1ul << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */
-
-#define SCB_ICSR_VECTPENDING_Pos 12 /*!< SCB ICSR: VECTPENDING Position */
-#define SCB_ICSR_VECTPENDING_Msk (0x1FFul << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */
-
-#define SCB_ICSR_RETTOBASE_Pos 11 /*!< SCB ICSR: RETTOBASE Position */
-#define SCB_ICSR_RETTOBASE_Msk (1ul << SCB_ICSR_RETTOBASE_Pos) /*!< SCB ICSR: RETTOBASE Mask */
-
-#define SCB_ICSR_VECTACTIVE_Pos 0 /*!< SCB ICSR: VECTACTIVE Position */
-#define SCB_ICSR_VECTACTIVE_Msk (0x1FFul << SCB_ICSR_VECTACTIVE_Pos) /*!< SCB ICSR: VECTACTIVE Mask */
-
-/* SCB Interrupt Control State Register Definitions */
-#define SCB_VTOR_TBLBASE_Pos 29 /*!< SCB VTOR: TBLBASE Position */
-#define SCB_VTOR_TBLBASE_Msk (0x1FFul << SCB_VTOR_TBLBASE_Pos) /*!< SCB VTOR: TBLBASE Mask */
-
-#define SCB_VTOR_TBLOFF_Pos 7 /*!< SCB VTOR: TBLOFF Position */
-#define SCB_VTOR_TBLOFF_Msk (0x3FFFFFul << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */
-
-/* SCB Application Interrupt and Reset Control Register Definitions */
-#define SCB_AIRCR_VECTKEY_Pos 16 /*!< SCB AIRCR: VECTKEY Position */
-#define SCB_AIRCR_VECTKEY_Msk (0xFFFFul << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */
-
-#define SCB_AIRCR_VECTKEYSTAT_Pos 16 /*!< SCB AIRCR: VECTKEYSTAT Position */
-#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFul << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */
-
-#define SCB_AIRCR_ENDIANESS_Pos 15 /*!< SCB AIRCR: ENDIANESS Position */
-#define SCB_AIRCR_ENDIANESS_Msk (1ul << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */
-
-#define SCB_AIRCR_PRIGROUP_Pos 8 /*!< SCB AIRCR: PRIGROUP Position */
-#define SCB_AIRCR_PRIGROUP_Msk (7ul << SCB_AIRCR_PRIGROUP_Pos) /*!< SCB AIRCR: PRIGROUP Mask */
-
-#define SCB_AIRCR_SYSRESETREQ_Pos 2 /*!< SCB AIRCR: SYSRESETREQ Position */
-#define SCB_AIRCR_SYSRESETREQ_Msk (1ul << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */
-
-#define SCB_AIRCR_VECTCLRACTIVE_Pos 1 /*!< SCB AIRCR: VECTCLRACTIVE Position */
-#define SCB_AIRCR_VECTCLRACTIVE_Msk (1ul << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */
-
-#define SCB_AIRCR_VECTRESET_Pos 0 /*!< SCB AIRCR: VECTRESET Position */
-#define SCB_AIRCR_VECTRESET_Msk (1ul << SCB_AIRCR_VECTRESET_Pos) /*!< SCB AIRCR: VECTRESET Mask */
-
-/* SCB System Control Register Definitions */
-#define SCB_SCR_SEVONPEND_Pos 4 /*!< SCB SCR: SEVONPEND Position */
-#define SCB_SCR_SEVONPEND_Msk (1ul << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */
-
-#define SCB_SCR_SLEEPDEEP_Pos 2 /*!< SCB SCR: SLEEPDEEP Position */
-#define SCB_SCR_SLEEPDEEP_Msk (1ul << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */
-
-#define SCB_SCR_SLEEPONEXIT_Pos 1 /*!< SCB SCR: SLEEPONEXIT Position */
-#define SCB_SCR_SLEEPONEXIT_Msk (1ul << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */
-
-/* SCB Configuration Control Register Definitions */
-#define SCB_CCR_STKALIGN_Pos 9 /*!< SCB CCR: STKALIGN Position */
-#define SCB_CCR_STKALIGN_Msk (1ul << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */
-
-#define SCB_CCR_BFHFNMIGN_Pos 8 /*!< SCB CCR: BFHFNMIGN Position */
-#define SCB_CCR_BFHFNMIGN_Msk (1ul << SCB_CCR_BFHFNMIGN_Pos) /*!< SCB CCR: BFHFNMIGN Mask */
-
-#define SCB_CCR_DIV_0_TRP_Pos 4 /*!< SCB CCR: DIV_0_TRP Position */
-#define SCB_CCR_DIV_0_TRP_Msk (1ul << SCB_CCR_DIV_0_TRP_Pos) /*!< SCB CCR: DIV_0_TRP Mask */
-
-#define SCB_CCR_UNALIGN_TRP_Pos 3 /*!< SCB CCR: UNALIGN_TRP Position */
-#define SCB_CCR_UNALIGN_TRP_Msk (1ul << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */
-
-#define SCB_CCR_USERSETMPEND_Pos 1 /*!< SCB CCR: USERSETMPEND Position */
-#define SCB_CCR_USERSETMPEND_Msk (1ul << SCB_CCR_USERSETMPEND_Pos) /*!< SCB CCR: USERSETMPEND Mask */
-
-#define SCB_CCR_NONBASETHRDENA_Pos 0 /*!< SCB CCR: NONBASETHRDENA Position */
-#define SCB_CCR_NONBASETHRDENA_Msk (1ul << SCB_CCR_NONBASETHRDENA_Pos) /*!< SCB CCR: NONBASETHRDENA Mask */
-
-/* SCB System Handler Control and State Register Definitions */
-#define SCB_SHCSR_USGFAULTENA_Pos 18 /*!< SCB SHCSR: USGFAULTENA Position */
-#define SCB_SHCSR_USGFAULTENA_Msk (1ul << SCB_SHCSR_USGFAULTENA_Pos) /*!< SCB SHCSR: USGFAULTENA Mask */
-
-#define SCB_SHCSR_BUSFAULTENA_Pos 17 /*!< SCB SHCSR: BUSFAULTENA Position */
-#define SCB_SHCSR_BUSFAULTENA_Msk (1ul << SCB_SHCSR_BUSFAULTENA_Pos) /*!< SCB SHCSR: BUSFAULTENA Mask */
-
-#define SCB_SHCSR_MEMFAULTENA_Pos 16 /*!< SCB SHCSR: MEMFAULTENA Position */
-#define SCB_SHCSR_MEMFAULTENA_Msk (1ul << SCB_SHCSR_MEMFAULTENA_Pos) /*!< SCB SHCSR: MEMFAULTENA Mask */
-
-#define SCB_SHCSR_SVCALLPENDED_Pos 15 /*!< SCB SHCSR: SVCALLPENDED Position */
-#define SCB_SHCSR_SVCALLPENDED_Msk (1ul << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */
-
-#define SCB_SHCSR_BUSFAULTPENDED_Pos 14 /*!< SCB SHCSR: BUSFAULTPENDED Position */
-#define SCB_SHCSR_BUSFAULTPENDED_Msk (1ul << SCB_SHCSR_BUSFAULTPENDED_Pos) /*!< SCB SHCSR: BUSFAULTPENDED Mask */
-
-#define SCB_SHCSR_MEMFAULTPENDED_Pos 13 /*!< SCB SHCSR: MEMFAULTPENDED Position */
-#define SCB_SHCSR_MEMFAULTPENDED_Msk (1ul << SCB_SHCSR_MEMFAULTPENDED_Pos) /*!< SCB SHCSR: MEMFAULTPENDED Mask */
-
-#define SCB_SHCSR_USGFAULTPENDED_Pos 12 /*!< SCB SHCSR: USGFAULTPENDED Position */
-#define SCB_SHCSR_USGFAULTPENDED_Msk (1ul << SCB_SHCSR_USGFAULTPENDED_Pos) /*!< SCB SHCSR: USGFAULTPENDED Mask */
-
-#define SCB_SHCSR_SYSTICKACT_Pos 11 /*!< SCB SHCSR: SYSTICKACT Position */
-#define SCB_SHCSR_SYSTICKACT_Msk (1ul << SCB_SHCSR_SYSTICKACT_Pos) /*!< SCB SHCSR: SYSTICKACT Mask */
-
-#define SCB_SHCSR_PENDSVACT_Pos 10 /*!< SCB SHCSR: PENDSVACT Position */
-#define SCB_SHCSR_PENDSVACT_Msk (1ul << SCB_SHCSR_PENDSVACT_Pos) /*!< SCB SHCSR: PENDSVACT Mask */
-
-#define SCB_SHCSR_MONITORACT_Pos 8 /*!< SCB SHCSR: MONITORACT Position */
-#define SCB_SHCSR_MONITORACT_Msk (1ul << SCB_SHCSR_MONITORACT_Pos) /*!< SCB SHCSR: MONITORACT Mask */
-
-#define SCB_SHCSR_SVCALLACT_Pos 7 /*!< SCB SHCSR: SVCALLACT Position */
-#define SCB_SHCSR_SVCALLACT_Msk (1ul << SCB_SHCSR_SVCALLACT_Pos) /*!< SCB SHCSR: SVCALLACT Mask */
-
-#define SCB_SHCSR_USGFAULTACT_Pos 3 /*!< SCB SHCSR: USGFAULTACT Position */
-#define SCB_SHCSR_USGFAULTACT_Msk (1ul << SCB_SHCSR_USGFAULTACT_Pos) /*!< SCB SHCSR: USGFAULTACT Mask */
-
-#define SCB_SHCSR_BUSFAULTACT_Pos 1 /*!< SCB SHCSR: BUSFAULTACT Position */
-#define SCB_SHCSR_BUSFAULTACT_Msk (1ul << SCB_SHCSR_BUSFAULTACT_Pos) /*!< SCB SHCSR: BUSFAULTACT Mask */
-
-#define SCB_SHCSR_MEMFAULTACT_Pos 0 /*!< SCB SHCSR: MEMFAULTACT Position */
-#define SCB_SHCSR_MEMFAULTACT_Msk (1ul << SCB_SHCSR_MEMFAULTACT_Pos) /*!< SCB SHCSR: MEMFAULTACT Mask */
-
-/* SCB Configurable Fault Status Registers Definitions */
-#define SCB_CFSR_USGFAULTSR_Pos 16 /*!< SCB CFSR: Usage Fault Status Register Position */
-#define SCB_CFSR_USGFAULTSR_Msk (0xFFFFul << SCB_CFSR_USGFAULTSR_Pos) /*!< SCB CFSR: Usage Fault Status Register Mask */
-
-#define SCB_CFSR_BUSFAULTSR_Pos 8 /*!< SCB CFSR: Bus Fault Status Register Position */
-#define SCB_CFSR_BUSFAULTSR_Msk (0xFFul << SCB_CFSR_BUSFAULTSR_Pos) /*!< SCB CFSR: Bus Fault Status Register Mask */
-
-#define SCB_CFSR_MEMFAULTSR_Pos 0 /*!< SCB CFSR: Memory Manage Fault Status Register Position */
-#define SCB_CFSR_MEMFAULTSR_Msk (0xFFul << SCB_CFSR_MEMFAULTSR_Pos) /*!< SCB CFSR: Memory Manage Fault Status Register Mask */
-
-/* SCB Hard Fault Status Registers Definitions */
-#define SCB_HFSR_DEBUGEVT_Pos 31 /*!< SCB HFSR: DEBUGEVT Position */
-#define SCB_HFSR_DEBUGEVT_Msk (1ul << SCB_HFSR_DEBUGEVT_Pos) /*!< SCB HFSR: DEBUGEVT Mask */
-
-#define SCB_HFSR_FORCED_Pos 30 /*!< SCB HFSR: FORCED Position */
-#define SCB_HFSR_FORCED_Msk (1ul << SCB_HFSR_FORCED_Pos) /*!< SCB HFSR: FORCED Mask */
-
-#define SCB_HFSR_VECTTBL_Pos 1 /*!< SCB HFSR: VECTTBL Position */
-#define SCB_HFSR_VECTTBL_Msk (1ul << SCB_HFSR_VECTTBL_Pos) /*!< SCB HFSR: VECTTBL Mask */
-
-/* SCB Debug Fault Status Register Definitions */
-#define SCB_DFSR_EXTERNAL_Pos 4 /*!< SCB DFSR: EXTERNAL Position */
-#define SCB_DFSR_EXTERNAL_Msk (1ul << SCB_DFSR_EXTERNAL_Pos) /*!< SCB DFSR: EXTERNAL Mask */
-
-#define SCB_DFSR_VCATCH_Pos 3 /*!< SCB DFSR: VCATCH Position */
-#define SCB_DFSR_VCATCH_Msk (1ul << SCB_DFSR_VCATCH_Pos) /*!< SCB DFSR: VCATCH Mask */
-
-#define SCB_DFSR_DWTTRAP_Pos 2 /*!< SCB DFSR: DWTTRAP Position */
-#define SCB_DFSR_DWTTRAP_Msk (1ul << SCB_DFSR_DWTTRAP_Pos) /*!< SCB DFSR: DWTTRAP Mask */
-
-#define SCB_DFSR_BKPT_Pos 1 /*!< SCB DFSR: BKPT Position */
-#define SCB_DFSR_BKPT_Msk (1ul << SCB_DFSR_BKPT_Pos) /*!< SCB DFSR: BKPT Mask */
-
-#define SCB_DFSR_HALTED_Pos 0 /*!< SCB DFSR: HALTED Position */
-#define SCB_DFSR_HALTED_Msk (1ul << SCB_DFSR_HALTED_Pos) /*!< SCB DFSR: HALTED Mask */
-/*@}*/ /* end of group CMSIS_CM3_SCB */
-
-
-/** @addtogroup CMSIS_CM3_SysTick CMSIS CM3 SysTick
- memory mapped structure for SysTick
- @{
- */
-typedef struct
-{
- __IO uint32_t CTRL; /*!< Offset: 0x00 SysTick Control and Status Register */
- __IO uint32_t LOAD; /*!< Offset: 0x04 SysTick Reload Value Register */
- __IO uint32_t VAL; /*!< Offset: 0x08 SysTick Current Value Register */
- __I uint32_t CALIB; /*!< Offset: 0x0C SysTick Calibration Register */
-} SysTick_Type;
-
-/* SysTick Control / Status Register Definitions */
-#define SysTick_CTRL_COUNTFLAG_Pos 16 /*!< SysTick CTRL: COUNTFLAG Position */
-#define SysTick_CTRL_COUNTFLAG_Msk (1ul << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */
-
-#define SysTick_CTRL_CLKSOURCE_Pos 2 /*!< SysTick CTRL: CLKSOURCE Position */
-#define SysTick_CTRL_CLKSOURCE_Msk (1ul << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */
-
-#define SysTick_CTRL_TICKINT_Pos 1 /*!< SysTick CTRL: TICKINT Position */
-#define SysTick_CTRL_TICKINT_Msk (1ul << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */
-
-#define SysTick_CTRL_ENABLE_Pos 0 /*!< SysTick CTRL: ENABLE Position */
-#define SysTick_CTRL_ENABLE_Msk (1ul << SysTick_CTRL_ENABLE_Pos) /*!< SysTick CTRL: ENABLE Mask */
-
-/* SysTick Reload Register Definitions */
-#define SysTick_LOAD_RELOAD_Pos 0 /*!< SysTick LOAD: RELOAD Position */
-#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFul << SysTick_LOAD_RELOAD_Pos) /*!< SysTick LOAD: RELOAD Mask */
-
-/* SysTick Current Register Definitions */
-#define SysTick_VAL_CURRENT_Pos 0 /*!< SysTick VAL: CURRENT Position */
-#define SysTick_VAL_CURRENT_Msk (0xFFFFFFul << SysTick_VAL_CURRENT_Pos) /*!< SysTick VAL: CURRENT Mask */
-
-/* SysTick Calibration Register Definitions */
-#define SysTick_CALIB_NOREF_Pos 31 /*!< SysTick CALIB: NOREF Position */
-#define SysTick_CALIB_NOREF_Msk (1ul << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */
-
-#define SysTick_CALIB_SKEW_Pos 30 /*!< SysTick CALIB: SKEW Position */
-#define SysTick_CALIB_SKEW_Msk (1ul << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */
-
-#define SysTick_CALIB_TENMS_Pos 0 /*!< SysTick CALIB: TENMS Position */
-#define SysTick_CALIB_TENMS_Msk (0xFFFFFFul << SysTick_VAL_CURRENT_Pos) /*!< SysTick CALIB: TENMS Mask */
-/*@}*/ /* end of group CMSIS_CM3_SysTick */
-
-
-/** @addtogroup CMSIS_CM3_ITM CMSIS CM3 ITM
- memory mapped structure for Instrumentation Trace Macrocell (ITM)
- @{
- */
-typedef struct
-{
- __O union
- {
- __O uint8_t u8; /*!< Offset: ITM Stimulus Port 8-bit */
- __O uint16_t u16; /*!< Offset: ITM Stimulus Port 16-bit */
- __O uint32_t u32; /*!< Offset: ITM Stimulus Port 32-bit */
- } PORT [32]; /*!< Offset: 0x00 ITM Stimulus Port Registers */
- uint32_t RESERVED0[864];
- __IO uint32_t TER; /*!< Offset: ITM Trace Enable Register */
- uint32_t RESERVED1[15];
- __IO uint32_t TPR; /*!< Offset: ITM Trace Privilege Register */
- uint32_t RESERVED2[15];
- __IO uint32_t TCR; /*!< Offset: ITM Trace Control Register */
- uint32_t RESERVED3[29];
- __IO uint32_t IWR; /*!< Offset: ITM Integration Write Register */
- __IO uint32_t IRR; /*!< Offset: ITM Integration Read Register */
- __IO uint32_t IMCR; /*!< Offset: ITM Integration Mode Control Register */
- uint32_t RESERVED4[43];
- __IO uint32_t LAR; /*!< Offset: ITM Lock Access Register */
- __IO uint32_t LSR; /*!< Offset: ITM Lock Status Register */
- uint32_t RESERVED5[6];
- __I uint32_t PID4; /*!< Offset: ITM Peripheral Identification Register #4 */
- __I uint32_t PID5; /*!< Offset: ITM Peripheral Identification Register #5 */
- __I uint32_t PID6; /*!< Offset: ITM Peripheral Identification Register #6 */
- __I uint32_t PID7; /*!< Offset: ITM Peripheral Identification Register #7 */
- __I uint32_t PID0; /*!< Offset: ITM Peripheral Identification Register #0 */
- __I uint32_t PID1; /*!< Offset: ITM Peripheral Identification Register #1 */
- __I uint32_t PID2; /*!< Offset: ITM Peripheral Identification Register #2 */
- __I uint32_t PID3; /*!< Offset: ITM Peripheral Identification Register #3 */
- __I uint32_t CID0; /*!< Offset: ITM Component Identification Register #0 */
- __I uint32_t CID1; /*!< Offset: ITM Component Identification Register #1 */
- __I uint32_t CID2; /*!< Offset: ITM Component Identification Register #2 */
- __I uint32_t CID3; /*!< Offset: ITM Component Identification Register #3 */
-} ITM_Type;
-
-/* ITM Trace Privilege Register Definitions */
-#define ITM_TPR_PRIVMASK_Pos 0 /*!< ITM TPR: PRIVMASK Position */
-#define ITM_TPR_PRIVMASK_Msk (0xFul << ITM_TPR_PRIVMASK_Pos) /*!< ITM TPR: PRIVMASK Mask */
-
-/* ITM Trace Control Register Definitions */
-#define ITM_TCR_BUSY_Pos 23 /*!< ITM TCR: BUSY Position */
-#define ITM_TCR_BUSY_Msk (1ul << ITM_TCR_BUSY_Pos) /*!< ITM TCR: BUSY Mask */
-
-#define ITM_TCR_ATBID_Pos 16 /*!< ITM TCR: ATBID Position */
-#define ITM_TCR_ATBID_Msk (0x7Ful << ITM_TCR_ATBID_Pos) /*!< ITM TCR: ATBID Mask */
-
-#define ITM_TCR_TSPrescale_Pos 8 /*!< ITM TCR: TSPrescale Position */
-#define ITM_TCR_TSPrescale_Msk (3ul << ITM_TCR_TSPrescale_Pos) /*!< ITM TCR: TSPrescale Mask */
-
-#define ITM_TCR_SWOENA_Pos 4 /*!< ITM TCR: SWOENA Position */
-#define ITM_TCR_SWOENA_Msk (1ul << ITM_TCR_SWOENA_Pos) /*!< ITM TCR: SWOENA Mask */
-
-#define ITM_TCR_DWTENA_Pos 3 /*!< ITM TCR: DWTENA Position */
-#define ITM_TCR_DWTENA_Msk (1ul << ITM_TCR_DWTENA_Pos) /*!< ITM TCR: DWTENA Mask */
-
-#define ITM_TCR_SYNCENA_Pos 2 /*!< ITM TCR: SYNCENA Position */
-#define ITM_TCR_SYNCENA_Msk (1ul << ITM_TCR_SYNCENA_Pos) /*!< ITM TCR: SYNCENA Mask */
-
-#define ITM_TCR_TSENA_Pos 1 /*!< ITM TCR: TSENA Position */
-#define ITM_TCR_TSENA_Msk (1ul << ITM_TCR_TSENA_Pos) /*!< ITM TCR: TSENA Mask */
-
-#define ITM_TCR_ITMENA_Pos 0 /*!< ITM TCR: ITM Enable bit Position */
-#define ITM_TCR_ITMENA_Msk (1ul << ITM_TCR_ITMENA_Pos) /*!< ITM TCR: ITM Enable bit Mask */
-
-/* ITM Integration Write Register Definitions */
-#define ITM_IWR_ATVALIDM_Pos 0 /*!< ITM IWR: ATVALIDM Position */
-#define ITM_IWR_ATVALIDM_Msk (1ul << ITM_IWR_ATVALIDM_Pos) /*!< ITM IWR: ATVALIDM Mask */
-
-/* ITM Integration Read Register Definitions */
-#define ITM_IRR_ATREADYM_Pos 0 /*!< ITM IRR: ATREADYM Position */
-#define ITM_IRR_ATREADYM_Msk (1ul << ITM_IRR_ATREADYM_Pos) /*!< ITM IRR: ATREADYM Mask */
-
-/* ITM Integration Mode Control Register Definitions */
-#define ITM_IMCR_INTEGRATION_Pos 0 /*!< ITM IMCR: INTEGRATION Position */
-#define ITM_IMCR_INTEGRATION_Msk (1ul << ITM_IMCR_INTEGRATION_Pos) /*!< ITM IMCR: INTEGRATION Mask */
-
-/* ITM Lock Status Register Definitions */
-#define ITM_LSR_ByteAcc_Pos 2 /*!< ITM LSR: ByteAcc Position */
-#define ITM_LSR_ByteAcc_Msk (1ul << ITM_LSR_ByteAcc_Pos) /*!< ITM LSR: ByteAcc Mask */
-
-#define ITM_LSR_Access_Pos 1 /*!< ITM LSR: Access Position */
-#define ITM_LSR_Access_Msk (1ul << ITM_LSR_Access_Pos) /*!< ITM LSR: Access Mask */
-
-#define ITM_LSR_Present_Pos 0 /*!< ITM LSR: Present Position */
-#define ITM_LSR_Present_Msk (1ul << ITM_LSR_Present_Pos) /*!< ITM LSR: Present Mask */
-/*@}*/ /* end of group CMSIS_CM3_ITM */
-
-
-/** @addtogroup CMSIS_CM3_InterruptType CMSIS CM3 Interrupt Type
- memory mapped structure for Interrupt Type
- @{
- */
-typedef struct
-{
- uint32_t RESERVED0;
- __I uint32_t ICTR; /*!< Offset: 0x04 Interrupt Control Type Register */
-#if ((defined __CM3_REV) && (__CM3_REV >= 0x200))
- __IO uint32_t ACTLR; /*!< Offset: 0x08 Auxiliary Control Register */
-#else
- uint32_t RESERVED1;
-#endif
-} InterruptType_Type;
-
-/* Interrupt Controller Type Register Definitions */
-#define InterruptType_ICTR_INTLINESNUM_Pos 0 /*!< InterruptType ICTR: INTLINESNUM Position */
-#define InterruptType_ICTR_INTLINESNUM_Msk (0x1Ful << InterruptType_ICTR_INTLINESNUM_Pos) /*!< InterruptType ICTR: INTLINESNUM Mask */
-
-/* Auxiliary Control Register Definitions */
-#define InterruptType_ACTLR_DISFOLD_Pos 2 /*!< InterruptType ACTLR: DISFOLD Position */
-#define InterruptType_ACTLR_DISFOLD_Msk (1ul << InterruptType_ACTLR_DISFOLD_Pos) /*!< InterruptType ACTLR: DISFOLD Mask */
-
-#define InterruptType_ACTLR_DISDEFWBUF_Pos 1 /*!< InterruptType ACTLR: DISDEFWBUF Position */
-#define InterruptType_ACTLR_DISDEFWBUF_Msk (1ul << InterruptType_ACTLR_DISDEFWBUF_Pos) /*!< InterruptType ACTLR: DISDEFWBUF Mask */
-
-#define InterruptType_ACTLR_DISMCYCINT_Pos 0 /*!< InterruptType ACTLR: DISMCYCINT Position */
-#define InterruptType_ACTLR_DISMCYCINT_Msk (1ul << InterruptType_ACTLR_DISMCYCINT_Pos) /*!< InterruptType ACTLR: DISMCYCINT Mask */
-/*@}*/ /* end of group CMSIS_CM3_InterruptType */
-
-
-#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1)
-/** @addtogroup CMSIS_CM3_MPU CMSIS CM3 MPU
- memory mapped structure for Memory Protection Unit (MPU)
- @{
- */
-typedef struct
-{
- __I uint32_t TYPE; /*!< Offset: 0x00 MPU Type Register */
- __IO uint32_t CTRL; /*!< Offset: 0x04 MPU Control Register */
- __IO uint32_t RNR; /*!< Offset: 0x08 MPU Region RNRber Register */
- __IO uint32_t RBAR; /*!< Offset: 0x0C MPU Region Base Address Register */
- __IO uint32_t RASR; /*!< Offset: 0x10 MPU Region Attribute and Size Register */
- __IO uint32_t RBAR_A1; /*!< Offset: 0x14 MPU Alias 1 Region Base Address Register */
- __IO uint32_t RASR_A1; /*!< Offset: 0x18 MPU Alias 1 Region Attribute and Size Register */
- __IO uint32_t RBAR_A2; /*!< Offset: 0x1C MPU Alias 2 Region Base Address Register */
- __IO uint32_t RASR_A2; /*!< Offset: 0x20 MPU Alias 2 Region Attribute and Size Register */
- __IO uint32_t RBAR_A3; /*!< Offset: 0x24 MPU Alias 3 Region Base Address Register */
- __IO uint32_t RASR_A3; /*!< Offset: 0x28 MPU Alias 3 Region Attribute and Size Register */
-} MPU_Type;
-
-/* MPU Type Register */
-#define MPU_TYPE_IREGION_Pos 16 /*!< MPU TYPE: IREGION Position */
-#define MPU_TYPE_IREGION_Msk (0xFFul << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */
-
-#define MPU_TYPE_DREGION_Pos 8 /*!< MPU TYPE: DREGION Position */
-#define MPU_TYPE_DREGION_Msk (0xFFul << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */
-
-#define MPU_TYPE_SEPARATE_Pos 0 /*!< MPU TYPE: SEPARATE Position */
-#define MPU_TYPE_SEPARATE_Msk (1ul << MPU_TYPE_SEPARATE_Pos) /*!< MPU TYPE: SEPARATE Mask */
-
-/* MPU Control Register */
-#define MPU_CTRL_PRIVDEFENA_Pos 2 /*!< MPU CTRL: PRIVDEFENA Position */
-#define MPU_CTRL_PRIVDEFENA_Msk (1ul << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */
-
-#define MPU_CTRL_HFNMIENA_Pos 1 /*!< MPU CTRL: HFNMIENA Position */
-#define MPU_CTRL_HFNMIENA_Msk (1ul << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */
-
-#define MPU_CTRL_ENABLE_Pos 0 /*!< MPU CTRL: ENABLE Position */
-#define MPU_CTRL_ENABLE_Msk (1ul << MPU_CTRL_ENABLE_Pos) /*!< MPU CTRL: ENABLE Mask */
-
-/* MPU Region Number Register */
-#define MPU_RNR_REGION_Pos 0 /*!< MPU RNR: REGION Position */
-#define MPU_RNR_REGION_Msk (0xFFul << MPU_RNR_REGION_Pos) /*!< MPU RNR: REGION Mask */
-
-/* MPU Region Base Address Register */
-#define MPU_RBAR_ADDR_Pos 5 /*!< MPU RBAR: ADDR Position */
-#define MPU_RBAR_ADDR_Msk (0x7FFFFFFul << MPU_RBAR_ADDR_Pos) /*!< MPU RBAR: ADDR Mask */
-
-#define MPU_RBAR_VALID_Pos 4 /*!< MPU RBAR: VALID Position */
-#define MPU_RBAR_VALID_Msk (1ul << MPU_RBAR_VALID_Pos) /*!< MPU RBAR: VALID Mask */
-
-#define MPU_RBAR_REGION_Pos 0 /*!< MPU RBAR: REGION Position */
-#define MPU_RBAR_REGION_Msk (0xFul << MPU_RBAR_REGION_Pos) /*!< MPU RBAR: REGION Mask */
-
-/* MPU Region Attribute and Size Register */
-#define MPU_RASR_XN_Pos 28 /*!< MPU RASR: XN Position */
-#define MPU_RASR_XN_Msk (1ul << MPU_RASR_XN_Pos) /*!< MPU RASR: XN Mask */
-
-#define MPU_RASR_AP_Pos 24 /*!< MPU RASR: AP Position */
-#define MPU_RASR_AP_Msk (7ul << MPU_RASR_AP_Pos) /*!< MPU RASR: AP Mask */
-
-#define MPU_RASR_TEX_Pos 19 /*!< MPU RASR: TEX Position */
-#define MPU_RASR_TEX_Msk (7ul << MPU_RASR_TEX_Pos) /*!< MPU RASR: TEX Mask */
-
-#define MPU_RASR_S_Pos 18 /*!< MPU RASR: Shareable bit Position */
-#define MPU_RASR_S_Msk (1ul << MPU_RASR_S_Pos) /*!< MPU RASR: Shareable bit Mask */
-
-#define MPU_RASR_C_Pos 17 /*!< MPU RASR: Cacheable bit Position */
-#define MPU_RASR_C_Msk (1ul << MPU_RASR_C_Pos) /*!< MPU RASR: Cacheable bit Mask */
-
-#define MPU_RASR_B_Pos 16 /*!< MPU RASR: Bufferable bit Position */
-#define MPU_RASR_B_Msk (1ul << MPU_RASR_B_Pos) /*!< MPU RASR: Bufferable bit Mask */
-
-#define MPU_RASR_SRD_Pos 8 /*!< MPU RASR: Sub-Region Disable Position */
-#define MPU_RASR_SRD_Msk (0xFFul << MPU_RASR_SRD_Pos) /*!< MPU RASR: Sub-Region Disable Mask */
-
-#define MPU_RASR_SIZE_Pos 1 /*!< MPU RASR: Region Size Field Position */
-#define MPU_RASR_SIZE_Msk (0x1Ful << MPU_RASR_SIZE_Pos) /*!< MPU RASR: Region Size Field Mask */
-
-#define MPU_RASR_ENA_Pos 0 /*!< MPU RASR: Region enable bit Position */
-#define MPU_RASR_ENA_Msk (0x1Ful << MPU_RASR_ENA_Pos) /*!< MPU RASR: Region enable bit Disable Mask */
-
-/*@}*/ /* end of group CMSIS_CM3_MPU */
-#endif
-
-
-/** @addtogroup CMSIS_CM3_CoreDebug CMSIS CM3 Core Debug
- memory mapped structure for Core Debug Register
- @{
- */
-typedef struct
-{
- __IO uint32_t DHCSR; /*!< Offset: 0x00 Debug Halting Control and Status Register */
- __O uint32_t DCRSR; /*!< Offset: 0x04 Debug Core Register Selector Register */
- __IO uint32_t DCRDR; /*!< Offset: 0x08 Debug Core Register Data Register */
- __IO uint32_t DEMCR; /*!< Offset: 0x0C Debug Exception and Monitor Control Register */
-} CoreDebug_Type;
-
-/* Debug Halting Control and Status Register */
-#define CoreDebug_DHCSR_DBGKEY_Pos 16 /*!< CoreDebug DHCSR: DBGKEY Position */
-#define CoreDebug_DHCSR_DBGKEY_Msk (0xFFFFul << CoreDebug_DHCSR_DBGKEY_Pos) /*!< CoreDebug DHCSR: DBGKEY Mask */
-
-#define CoreDebug_DHCSR_S_RESET_ST_Pos 25 /*!< CoreDebug DHCSR: S_RESET_ST Position */
-#define CoreDebug_DHCSR_S_RESET_ST_Msk (1ul << CoreDebug_DHCSR_S_RESET_ST_Pos) /*!< CoreDebug DHCSR: S_RESET_ST Mask */
-
-#define CoreDebug_DHCSR_S_RETIRE_ST_Pos 24 /*!< CoreDebug DHCSR: S_RETIRE_ST Position */
-#define CoreDebug_DHCSR_S_RETIRE_ST_Msk (1ul << CoreDebug_DHCSR_S_RETIRE_ST_Pos) /*!< CoreDebug DHCSR: S_RETIRE_ST Mask */
-
-#define CoreDebug_DHCSR_S_LOCKUP_Pos 19 /*!< CoreDebug DHCSR: S_LOCKUP Position */
-#define CoreDebug_DHCSR_S_LOCKUP_Msk (1ul << CoreDebug_DHCSR_S_LOCKUP_Pos) /*!< CoreDebug DHCSR: S_LOCKUP Mask */
-
-#define CoreDebug_DHCSR_S_SLEEP_Pos 18 /*!< CoreDebug DHCSR: S_SLEEP Position */
-#define CoreDebug_DHCSR_S_SLEEP_Msk (1ul << CoreDebug_DHCSR_S_SLEEP_Pos) /*!< CoreDebug DHCSR: S_SLEEP Mask */
-
-#define CoreDebug_DHCSR_S_HALT_Pos 17 /*!< CoreDebug DHCSR: S_HALT Position */
-#define CoreDebug_DHCSR_S_HALT_Msk (1ul << CoreDebug_DHCSR_S_HALT_Pos) /*!< CoreDebug DHCSR: S_HALT Mask */
-
-#define CoreDebug_DHCSR_S_REGRDY_Pos 16 /*!< CoreDebug DHCSR: S_REGRDY Position */
-#define CoreDebug_DHCSR_S_REGRDY_Msk (1ul << CoreDebug_DHCSR_S_REGRDY_Pos) /*!< CoreDebug DHCSR: S_REGRDY Mask */
-
-#define CoreDebug_DHCSR_C_SNAPSTALL_Pos 5 /*!< CoreDebug DHCSR: C_SNAPSTALL Position */
-#define CoreDebug_DHCSR_C_SNAPSTALL_Msk (1ul << CoreDebug_DHCSR_C_SNAPSTALL_Pos) /*!< CoreDebug DHCSR: C_SNAPSTALL Mask */
-
-#define CoreDebug_DHCSR_C_MASKINTS_Pos 3 /*!< CoreDebug DHCSR: C_MASKINTS Position */
-#define CoreDebug_DHCSR_C_MASKINTS_Msk (1ul << CoreDebug_DHCSR_C_MASKINTS_Pos) /*!< CoreDebug DHCSR: C_MASKINTS Mask */
-
-#define CoreDebug_DHCSR_C_STEP_Pos 2 /*!< CoreDebug DHCSR: C_STEP Position */
-#define CoreDebug_DHCSR_C_STEP_Msk (1ul << CoreDebug_DHCSR_C_STEP_Pos) /*!< CoreDebug DHCSR: C_STEP Mask */
-
-#define CoreDebug_DHCSR_C_HALT_Pos 1 /*!< CoreDebug DHCSR: C_HALT Position */
-#define CoreDebug_DHCSR_C_HALT_Msk (1ul << CoreDebug_DHCSR_C_HALT_Pos) /*!< CoreDebug DHCSR: C_HALT Mask */
-
-#define CoreDebug_DHCSR_C_DEBUGEN_Pos 0 /*!< CoreDebug DHCSR: C_DEBUGEN Position */
-#define CoreDebug_DHCSR_C_DEBUGEN_Msk (1ul << CoreDebug_DHCSR_C_DEBUGEN_Pos) /*!< CoreDebug DHCSR: C_DEBUGEN Mask */
-
-/* Debug Core Register Selector Register */
-#define CoreDebug_DCRSR_REGWnR_Pos 16 /*!< CoreDebug DCRSR: REGWnR Position */
-#define CoreDebug_DCRSR_REGWnR_Msk (1ul << CoreDebug_DCRSR_REGWnR_Pos) /*!< CoreDebug DCRSR: REGWnR Mask */
-
-#define CoreDebug_DCRSR_REGSEL_Pos 0 /*!< CoreDebug DCRSR: REGSEL Position */
-#define CoreDebug_DCRSR_REGSEL_Msk (0x1Ful << CoreDebug_DCRSR_REGSEL_Pos) /*!< CoreDebug DCRSR: REGSEL Mask */
-
-/* Debug Exception and Monitor Control Register */
-#define CoreDebug_DEMCR_TRCENA_Pos 24 /*!< CoreDebug DEMCR: TRCENA Position */
-#define CoreDebug_DEMCR_TRCENA_Msk (1ul << CoreDebug_DEMCR_TRCENA_Pos) /*!< CoreDebug DEMCR: TRCENA Mask */
-
-#define CoreDebug_DEMCR_MON_REQ_Pos 19 /*!< CoreDebug DEMCR: MON_REQ Position */
-#define CoreDebug_DEMCR_MON_REQ_Msk (1ul << CoreDebug_DEMCR_MON_REQ_Pos) /*!< CoreDebug DEMCR: MON_REQ Mask */
-
-#define CoreDebug_DEMCR_MON_STEP_Pos 18 /*!< CoreDebug DEMCR: MON_STEP Position */
-#define CoreDebug_DEMCR_MON_STEP_Msk (1ul << CoreDebug_DEMCR_MON_STEP_Pos) /*!< CoreDebug DEMCR: MON_STEP Mask */
-
-#define CoreDebug_DEMCR_MON_PEND_Pos 17 /*!< CoreDebug DEMCR: MON_PEND Position */
-#define CoreDebug_DEMCR_MON_PEND_Msk (1ul << CoreDebug_DEMCR_MON_PEND_Pos) /*!< CoreDebug DEMCR: MON_PEND Mask */
-
-#define CoreDebug_DEMCR_MON_EN_Pos 16 /*!< CoreDebug DEMCR: MON_EN Position */
-#define CoreDebug_DEMCR_MON_EN_Msk (1ul << CoreDebug_DEMCR_MON_EN_Pos) /*!< CoreDebug DEMCR: MON_EN Mask */
-
-#define CoreDebug_DEMCR_VC_HARDERR_Pos 10 /*!< CoreDebug DEMCR: VC_HARDERR Position */
-#define CoreDebug_DEMCR_VC_HARDERR_Msk (1ul << CoreDebug_DEMCR_VC_HARDERR_Pos) /*!< CoreDebug DEMCR: VC_HARDERR Mask */
-
-#define CoreDebug_DEMCR_VC_INTERR_Pos 9 /*!< CoreDebug DEMCR: VC_INTERR Position */
-#define CoreDebug_DEMCR_VC_INTERR_Msk (1ul << CoreDebug_DEMCR_VC_INTERR_Pos) /*!< CoreDebug DEMCR: VC_INTERR Mask */
-
-#define CoreDebug_DEMCR_VC_BUSERR_Pos 8 /*!< CoreDebug DEMCR: VC_BUSERR Position */
-#define CoreDebug_DEMCR_VC_BUSERR_Msk (1ul << CoreDebug_DEMCR_VC_BUSERR_Pos) /*!< CoreDebug DEMCR: VC_BUSERR Mask */
-
-#define CoreDebug_DEMCR_VC_STATERR_Pos 7 /*!< CoreDebug DEMCR: VC_STATERR Position */
-#define CoreDebug_DEMCR_VC_STATERR_Msk (1ul << CoreDebug_DEMCR_VC_STATERR_Pos) /*!< CoreDebug DEMCR: VC_STATERR Mask */
-
-#define CoreDebug_DEMCR_VC_CHKERR_Pos 6 /*!< CoreDebug DEMCR: VC_CHKERR Position */
-#define CoreDebug_DEMCR_VC_CHKERR_Msk (1ul << CoreDebug_DEMCR_VC_CHKERR_Pos) /*!< CoreDebug DEMCR: VC_CHKERR Mask */
-
-#define CoreDebug_DEMCR_VC_NOCPERR_Pos 5 /*!< CoreDebug DEMCR: VC_NOCPERR Position */
-#define CoreDebug_DEMCR_VC_NOCPERR_Msk (1ul << CoreDebug_DEMCR_VC_NOCPERR_Pos) /*!< CoreDebug DEMCR: VC_NOCPERR Mask */
-
-#define CoreDebug_DEMCR_VC_MMERR_Pos 4 /*!< CoreDebug DEMCR: VC_MMERR Position */
-#define CoreDebug_DEMCR_VC_MMERR_Msk (1ul << CoreDebug_DEMCR_VC_MMERR_Pos) /*!< CoreDebug DEMCR: VC_MMERR Mask */
-
-#define CoreDebug_DEMCR_VC_CORERESET_Pos 0 /*!< CoreDebug DEMCR: VC_CORERESET Position */
-#define CoreDebug_DEMCR_VC_CORERESET_Msk (1ul << CoreDebug_DEMCR_VC_CORERESET_Pos) /*!< CoreDebug DEMCR: VC_CORERESET Mask */
-/*@}*/ /* end of group CMSIS_CM3_CoreDebug */
-
-
-/* Memory mapping of Cortex-M3 Hardware */
-#define SCS_BASE (0xE000E000) /*!< System Control Space Base Address */
-#define ITM_BASE (0xE0000000) /*!< ITM Base Address */
-#define CoreDebug_BASE (0xE000EDF0) /*!< Core Debug Base Address */
-#define SysTick_BASE (SCS_BASE + 0x0010) /*!< SysTick Base Address */
-#define NVIC_BASE (SCS_BASE + 0x0100) /*!< NVIC Base Address */
-#define SCB_BASE (SCS_BASE + 0x0D00) /*!< System Control Block Base Address */
-
-#define InterruptType ((InterruptType_Type *) SCS_BASE) /*!< Interrupt Type Register */
-#define SCB ((SCB_Type *) SCB_BASE) /*!< SCB configuration struct */
-#define SysTick ((SysTick_Type *) SysTick_BASE) /*!< SysTick configuration struct */
-#define NVIC ((NVIC_Type *) NVIC_BASE) /*!< NVIC configuration struct */
-#define ITM ((ITM_Type *) ITM_BASE) /*!< ITM configuration struct */
-#define CoreDebug ((CoreDebug_Type *) CoreDebug_BASE) /*!< Core Debug configuration struct */
-
-#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1)
- #define MPU_BASE (SCS_BASE + 0x0D90) /*!< Memory Protection Unit */
- #define MPU ((MPU_Type*) MPU_BASE) /*!< Memory Protection Unit */
-#endif
-
-/*@}*/ /* end of group CMSIS_CM3_core_register */
-
-
-/*******************************************************************************
- * Hardware Abstraction Layer
- ******************************************************************************/
-
-#if defined ( __CC_ARM )
- #define __ASM __asm /*!< asm keyword for ARM Compiler */
- #define __INLINE __inline /*!< inline keyword for ARM Compiler */
-
-#elif defined ( __ICCARM__ )
- #define __ASM __asm /*!< asm keyword for IAR Compiler */
- #define __INLINE inline /*!< inline keyword for IAR Compiler. Only avaiable in High optimization mode! */
-
-#elif defined ( __GNUC__ )
- #define __ASM __asm /*!< asm keyword for GNU Compiler */
- #define __INLINE inline /*!< inline keyword for GNU Compiler */
-
-#elif defined ( __TASKING__ )
- #define __ASM __asm /*!< asm keyword for TASKING Compiler */
- #define __INLINE inline /*!< inline keyword for TASKING Compiler */
-
-#endif
-
-
-/* ################### Compiler specific Intrinsics ########################### */
-
-#if defined ( __CC_ARM ) /*------------------RealView Compiler -----------------*/
-/* ARM armcc specific functions */
-
-#define __enable_fault_irq __enable_fiq
-#define __disable_fault_irq __disable_fiq
-
-#define __NOP __nop
-#define __WFI __wfi
-#define __WFE __wfe
-#define __SEV __sev
-#define __ISB() __isb(0)
-#define __DSB() __dsb(0)
-#define __DMB() __dmb(0)
-#define __REV __rev
-#define __RBIT __rbit
-#define __LDREXB(ptr) ((unsigned char ) __ldrex(ptr))
-#define __LDREXH(ptr) ((unsigned short) __ldrex(ptr))
-#define __LDREXW(ptr) ((unsigned int ) __ldrex(ptr))
-#define __STREXB(value, ptr) __strex(value, ptr)
-#define __STREXH(value, ptr) __strex(value, ptr)
-#define __STREXW(value, ptr) __strex(value, ptr)
-
-
-/* intrinsic unsigned long long __ldrexd(volatile void *ptr) */
-/* intrinsic int __strexd(unsigned long long val, volatile void *ptr) */
-/* intrinsic void __enable_irq(); */
-/* intrinsic void __disable_irq(); */
-
-
-/**
- * @brief Return the Process Stack Pointer
- *
- * @return ProcessStackPointer
- *
- * Return the actual process stack pointer
- */
-extern uint32_t __get_PSP(void);
-
-/**
- * @brief Set the Process Stack Pointer
- *
- * @param topOfProcStack Process Stack Pointer
- *
- * Assign the value ProcessStackPointer to the MSP
- * (process stack pointer) Cortex processor register
- */
-extern void __set_PSP(uint32_t topOfProcStack);
-
-/**
- * @brief Return the Main Stack Pointer
- *
- * @return Main Stack Pointer
- *
- * Return the current value of the MSP (main stack pointer)
- * Cortex processor register
- */
-extern uint32_t __get_MSP(void);
-
-/**
- * @brief Set the Main Stack Pointer
- *
- * @param topOfMainStack Main Stack Pointer
- *
- * Assign the value mainStackPointer to the MSP
- * (main stack pointer) Cortex processor register
- */
-extern void __set_MSP(uint32_t topOfMainStack);
-
-/**
- * @brief Reverse byte order in unsigned short value
- *
- * @param value value to reverse
- * @return reversed value
- *
- * Reverse byte order in unsigned short value
- */
-extern uint32_t __REV16(uint16_t value);
-
-/**
- * @brief Reverse byte order in signed short value with sign extension to integer
- *
- * @param value value to reverse
- * @return reversed value
- *
- * Reverse byte order in signed short value with sign extension to integer
- */
-extern int32_t __REVSH(int16_t value);
-
-
-#if (__ARMCC_VERSION < 400000)
-
-/**
- * @brief Remove the exclusive lock created by ldrex
- *
- * Removes the exclusive lock which is created by ldrex.
- */
-extern void __CLREX(void);
-
-/**
- * @brief Return the Base Priority value
- *
- * @return BasePriority
- *
- * Return the content of the base priority register
- */
-extern uint32_t __get_BASEPRI(void);
-
-/**
- * @brief Set the Base Priority value
- *
- * @param basePri BasePriority
- *
- * Set the base priority register
- */
-extern void __set_BASEPRI(uint32_t basePri);
-
-/**
- * @brief Return the Priority Mask value
- *
- * @return PriMask
- *
- * Return state of the priority mask bit from the priority mask register
- */
-extern uint32_t __get_PRIMASK(void);
-
-/**
- * @brief Set the Priority Mask value
- *
- * @param priMask PriMask
- *
- * Set the priority mask bit in the priority mask register
- */
-extern void __set_PRIMASK(uint32_t priMask);
-
-/**
- * @brief Return the Fault Mask value
- *
- * @return FaultMask
- *
- * Return the content of the fault mask register
- */
-extern uint32_t __get_FAULTMASK(void);
-
-/**
- * @brief Set the Fault Mask value
- *
- * @param faultMask faultMask value
- *
- * Set the fault mask register
- */
-extern void __set_FAULTMASK(uint32_t faultMask);
-
-/**
- * @brief Return the Control Register value
- *
- * @return Control value
- *
- * Return the content of the control register
- */
-extern uint32_t __get_CONTROL(void);
-
-/**
- * @brief Set the Control Register value
- *
- * @param control Control value
- *
- * Set the control register
- */
-extern void __set_CONTROL(uint32_t control);
-
-#else /* (__ARMCC_VERSION >= 400000) */
-
-/**
- * @brief Remove the exclusive lock created by ldrex
- *
- * Removes the exclusive lock which is created by ldrex.
- */
-#define __CLREX __clrex
-
-/**
- * @brief Return the Base Priority value
- *
- * @return BasePriority
- *
- * Return the content of the base priority register
- */
-static __INLINE uint32_t __get_BASEPRI(void)
-{
- register uint32_t __regBasePri __ASM("basepri");
- return(__regBasePri);
-}
-
-/**
- * @brief Set the Base Priority value
- *
- * @param basePri BasePriority
- *
- * Set the base priority register
- */
-static __INLINE void __set_BASEPRI(uint32_t basePri)
-{
- register uint32_t __regBasePri __ASM("basepri");
- __regBasePri = (basePri & 0xff);
-}
-
-/**
- * @brief Return the Priority Mask value
- *
- * @return PriMask
- *
- * Return state of the priority mask bit from the priority mask register
- */
-static __INLINE uint32_t __get_PRIMASK(void)
-{
- register uint32_t __regPriMask __ASM("primask");
- return(__regPriMask);
-}
-
-/**
- * @brief Set the Priority Mask value
- *
- * @param priMask PriMask
- *
- * Set the priority mask bit in the priority mask register
- */
-static __INLINE void __set_PRIMASK(uint32_t priMask)
-{
- register uint32_t __regPriMask __ASM("primask");
- __regPriMask = (priMask);
-}
-
-/**
- * @brief Return the Fault Mask value
- *
- * @return FaultMask
- *
- * Return the content of the fault mask register
- */
-static __INLINE uint32_t __get_FAULTMASK(void)
-{
- register uint32_t __regFaultMask __ASM("faultmask");
- return(__regFaultMask);
-}
-
-/**
- * @brief Set the Fault Mask value
- *
- * @param faultMask faultMask value
- *
- * Set the fault mask register
- */
-static __INLINE void __set_FAULTMASK(uint32_t faultMask)
-{
- register uint32_t __regFaultMask __ASM("faultmask");
- __regFaultMask = (faultMask & 1);
-}
-
-/**
- * @brief Return the Control Register value
- *
- * @return Control value
- *
- * Return the content of the control register
- */
-static __INLINE uint32_t __get_CONTROL(void)
-{
- register uint32_t __regControl __ASM("control");
- return(__regControl);
-}
-
-/**
- * @brief Set the Control Register value
- *
- * @param control Control value
- *
- * Set the control register
- */
-static __INLINE void __set_CONTROL(uint32_t control)
-{
- register uint32_t __regControl __ASM("control");
- __regControl = control;
-}
-
-#endif /* __ARMCC_VERSION */
-
-
-
-#elif (defined (__ICCARM__)) /*------------------ ICC Compiler -------------------*/
-/* IAR iccarm specific functions */
-
-#define __enable_irq __enable_interrupt /*!< global Interrupt enable */
-#define __disable_irq __disable_interrupt /*!< global Interrupt disable */
-
-static __INLINE void __enable_fault_irq() { __ASM ("cpsie f"); }
-static __INLINE void __disable_fault_irq() { __ASM ("cpsid f"); }
-
-#define __NOP __no_operation /*!< no operation intrinsic in IAR Compiler */
-static __INLINE void __WFI() { __ASM ("wfi"); }
-static __INLINE void __WFE() { __ASM ("wfe"); }
-static __INLINE void __SEV() { __ASM ("sev"); }
-static __INLINE void __CLREX() { __ASM ("clrex"); }
-
-/* intrinsic void __ISB(void) */
-/* intrinsic void __DSB(void) */
-/* intrinsic void __DMB(void) */
-/* intrinsic void __set_PRIMASK(); */
-/* intrinsic void __get_PRIMASK(); */
-/* intrinsic void __set_FAULTMASK(); */
-/* intrinsic void __get_FAULTMASK(); */
-/* intrinsic uint32_t __REV(uint32_t value); */
-/* intrinsic uint32_t __REVSH(uint32_t value); */
-/* intrinsic unsigned long __STREX(unsigned long, unsigned long); */
-/* intrinsic unsigned long __LDREX(unsigned long *); */
-
-
-/**
- * @brief Return the Process Stack Pointer
- *
- * @return ProcessStackPointer
- *
- * Return the actual process stack pointer
- */
-//extern uint32_t __get_PSP(void);
-
-/**
- * @brief Set the Process Stack Pointer
- *
- * @param topOfProcStack Process Stack Pointer
- *
- * Assign the value ProcessStackPointer to the MSP
- * (process stack pointer) Cortex processor register
- */
-//extern void __set_PSP(uint32_t topOfProcStack);
-
-/**
- * @brief Return the Main Stack Pointer
- *
- * @return Main Stack Pointer
- *
- * Return the current value of the MSP (main stack pointer)
- * Cortex processor register
- */
-//extern uint32_t __get_MSP(void);
-
-/**
- * @brief Set the Main Stack Pointer
- *
- * @param topOfMainStack Main Stack Pointer
- *
- * Assign the value mainStackPointer to the MSP
- * (main stack pointer) Cortex processor register
- */
-//extern void __set_MSP(uint32_t topOfMainStack);
-
-/**
- * @brief Reverse byte order in unsigned short value
- *
- * @param value value to reverse
- * @return reversed value
- *
- * Reverse byte order in unsigned short value
- */
-//extern uint32_t __REV16(uint16_t value);
-
-/**
- * @brief Reverse bit order of value
- *
- * @param value value to reverse
- * @return reversed value
- *
- * Reverse bit order of value
- */
-//extern uint32_t __RBIT(uint32_t value);
-
-/**
- * @brief LDR Exclusive (8 bit)
- *
- * @param *addr address pointer
- * @return value of (*address)
- *
- * Exclusive LDR command for 8 bit values)
- */
-extern uint8_t __LDREXB(uint8_t *addr);
-
-/**
- * @brief LDR Exclusive (16 bit)
- *
- * @param *addr address pointer
- * @return value of (*address)
- *
- * Exclusive LDR command for 16 bit values
- */
-extern uint16_t __LDREXH(uint16_t *addr);
-
-/**
- * @brief LDR Exclusive (32 bit)
- *
- * @param *addr address pointer
- * @return value of (*address)
- *
- * Exclusive LDR command for 32 bit values
- */
-extern uint32_t __LDREXW(uint32_t *addr);
-
-/**
- * @brief STR Exclusive (8 bit)
- *
- * @param value value to store
- * @param *addr address pointer
- * @return successful / failed
- *
- * Exclusive STR command for 8 bit values
- */
-//extern uint32_t __STREXB(uint8_t value, uint8_t *addr);
-
-/**
- * @brief STR Exclusive (16 bit)
- *
- * @param value value to store
- * @param *addr address pointer
- * @return successful / failed
- *
- * Exclusive STR command for 16 bit values
- */
-//extern uint32_t __STREXH(uint16_t value, uint16_t *addr);
-
-/**
- * @brief STR Exclusive (32 bit)
- *
- * @param value value to store
- * @param *addr address pointer
- * @return successful / failed
- *
- * Exclusive STR command for 32 bit values
- */
-extern uint32_t __STREXW(uint32_t value, uint32_t *addr);
-
-
-
-#elif (defined (__GNUC__)) /*------------------ GNU Compiler ---------------------*/
-/* GNU gcc specific functions */
-
-static __INLINE void __enable_irq(void) { __ASM volatile ("cpsie i"); }
-static __INLINE void __disable_irq(void) { __ASM volatile ("cpsid i"); }
-
-static __INLINE void __enable_fault_irq(void) { __ASM volatile ("cpsie f"); }
-static __INLINE void __disable_fault_irq(void) { __ASM volatile ("cpsid f"); }
-
-static __INLINE void __NOP(void) { __ASM volatile ("nop"); }
-static __INLINE void __WFI(void) { __ASM volatile ("wfi"); }
-static __INLINE void __WFE(void) { __ASM volatile ("wfe"); }
-static __INLINE void __SEV(void) { __ASM volatile ("sev"); }
-static __INLINE void __ISB(void) { __ASM volatile ("isb"); }
-static __INLINE void __DSB(void) { __ASM volatile ("dsb"); }
-static __INLINE void __DMB(void) { __ASM volatile ("dmb"); }
-static __INLINE void __CLREX(void) { __ASM volatile ("clrex"); }
-
-
-/**
- * @brief Return the Process Stack Pointer
- *
- * @return ProcessStackPointer
- *
- * Return the actual process stack pointer
- */
-extern uint32_t __get_PSP(void);
-
-/**
- * @brief Set the Process Stack Pointer
- *
- * @param topOfProcStack Process Stack Pointer
- *
- * Assign the value ProcessStackPointer to the MSP
- * (process stack pointer) Cortex processor register
- */
-extern void __set_PSP(uint32_t topOfProcStack);
-
-/**
- * @brief Return the Main Stack Pointer
- *
- * @return Main Stack Pointer
- *
- * Return the current value of the MSP (main stack pointer)
- * Cortex processor register
- */
-extern uint32_t __get_MSP(void);
-
-/**
- * @brief Set the Main Stack Pointer
- *
- * @param topOfMainStack Main Stack Pointer
- *
- * Assign the value mainStackPointer to the MSP
- * (main stack pointer) Cortex processor register
- */
-extern void __set_MSP(uint32_t topOfMainStack);
-
-/**
- * @brief Return the Base Priority value
- *
- * @return BasePriority
- *
- * Return the content of the base priority register
- */
-extern uint32_t __get_BASEPRI(void);
-
-/**
- * @brief Set the Base Priority value
- *
- * @param basePri BasePriority
- *
- * Set the base priority register
- */
-extern void __set_BASEPRI(uint32_t basePri);
-
-/**
- * @brief Return the Priority Mask value
- *
- * @return PriMask
- *
- * Return state of the priority mask bit from the priority mask register
- */
-extern uint32_t __get_PRIMASK(void);
-
-/**
- * @brief Set the Priority Mask value
- *
- * @param priMask PriMask
- *
- * Set the priority mask bit in the priority mask register
- */
-extern void __set_PRIMASK(uint32_t priMask);
-
-/**
- * @brief Return the Fault Mask value
- *
- * @return FaultMask
- *
- * Return the content of the fault mask register
- */
-extern uint32_t __get_FAULTMASK(void);
-
-/**
- * @brief Set the Fault Mask value
- *
- * @param faultMask faultMask value
- *
- * Set the fault mask register
- */
-extern void __set_FAULTMASK(uint32_t faultMask);
-
-/**
- * @brief Return the Control Register value
-*
-* @return Control value
- *
- * Return the content of the control register
- */
-extern uint32_t __get_CONTROL(void);
-
-/**
- * @brief Set the Control Register value
- *
- * @param control Control value
- *
- * Set the control register
- */
-extern void __set_CONTROL(uint32_t control);
-
-/**
- * @brief Reverse byte order in integer value
- *
- * @param value value to reverse
- * @return reversed value
- *
- * Reverse byte order in integer value
- */
-extern uint32_t __REV(uint32_t value);
-
-/**
- * @brief Reverse byte order in unsigned short value
- *
- * @param value value to reverse
- * @return reversed value
- *
- * Reverse byte order in unsigned short value
- */
-extern uint32_t __REV16(uint16_t value);
-
-/**
- * @brief Reverse byte order in signed short value with sign extension to integer
- *
- * @param value value to reverse
- * @return reversed value
- *
- * Reverse byte order in signed short value with sign extension to integer
- */
-extern int32_t __REVSH(int16_t value);
-
-/**
- * @brief Reverse bit order of value
- *
- * @param value value to reverse
- * @return reversed value
- *
- * Reverse bit order of value
- */
-extern uint32_t __RBIT(uint32_t value);
-
-/**
- * @brief LDR Exclusive (8 bit)
- *
- * @param *addr address pointer
- * @return value of (*address)
- *
- * Exclusive LDR command for 8 bit value
- */
-extern uint8_t __LDREXB(uint8_t *addr);
-
-/**
- * @brief LDR Exclusive (16 bit)
- *
- * @param *addr address pointer
- * @return value of (*address)
- *
- * Exclusive LDR command for 16 bit values
- */
-extern uint16_t __LDREXH(uint16_t *addr);
-
-/**
- * @brief LDR Exclusive (32 bit)
- *
- * @param *addr address pointer
- * @return value of (*address)
- *
- * Exclusive LDR command for 32 bit values
- */
-extern uint32_t __LDREXW(uint32_t *addr);
-
-/**
- * @brief STR Exclusive (8 bit)
- *
- * @param value value to store
- * @param *addr address pointer
- * @return successful / failed
- *
- * Exclusive STR command for 8 bit values
- */
-extern uint32_t __STREXB(uint8_t value, uint8_t *addr);
-
-/**
- * @brief STR Exclusive (16 bit)
- *
- * @param value value to store
- * @param *addr address pointer
- * @return successful / failed
- *
- * Exclusive STR command for 16 bit values
- */
-extern uint32_t __STREXH(uint16_t value, uint16_t *addr);
-
-/**
- * @brief STR Exclusive (32 bit)
- *
- * @param value value to store
- * @param *addr address pointer
- * @return successful / failed
- *
- * Exclusive STR command for 32 bit values
- */
-extern uint32_t __STREXW(uint32_t value, uint32_t *addr);
-
-
-#elif (defined (__TASKING__)) /*------------------ TASKING Compiler ---------------------*/
-/* TASKING carm specific functions */
-
-/*
- * The CMSIS functions have been implemented as intrinsics in the compiler.
- * Please use "carm -?i" to get an up to date list of all instrinsics,
- * Including the CMSIS ones.
- */
-
-#endif
-
-
-/** @addtogroup CMSIS_CM3_Core_FunctionInterface CMSIS CM3 Core Function Interface
- Core Function Interface containing:
- - Core NVIC Functions
- - Core SysTick Functions
- - Core Reset Functions
-*/
-/*@{*/
-
-/* ########################## NVIC functions #################################### */
-
-/**
- * @brief Set the Priority Grouping in NVIC Interrupt Controller
- *
- * @param PriorityGroup is priority grouping field
- *
- * Set the priority grouping field using the required unlock sequence.
- * The parameter priority_grouping is assigned to the field
- * SCB->AIRCR [10:8] PRIGROUP field. Only values from 0..7 are used.
- * In case of a conflict between priority grouping and available
- * priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set.
- */
-static __INLINE void NVIC_SetPriorityGrouping(uint32_t PriorityGroup)
-{
- uint32_t reg_value;
- uint32_t PriorityGroupTmp = (PriorityGroup & 0x07); /* only values 0..7 are used */
-
- reg_value = SCB->AIRCR; /* read old register configuration */
- reg_value &= ~(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk); /* clear bits to change */
- reg_value = (reg_value |
- (0x5FA << SCB_AIRCR_VECTKEY_Pos) |
- (PriorityGroupTmp << 8)); /* Insert write key and priorty group */
- SCB->AIRCR = reg_value;
-}
-
-/**
- * @brief Get the Priority Grouping from NVIC Interrupt Controller
- *
- * @return priority grouping field
- *
- * Get the priority grouping from NVIC Interrupt Controller.
- * priority grouping is SCB->AIRCR [10:8] PRIGROUP field.
- */
-static __INLINE uint32_t NVIC_GetPriorityGrouping(void)
-{
- return ((SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos); /* read priority grouping field */
-}
-
-/**
- * @brief Enable Interrupt in NVIC Interrupt Controller
- *
- * @param IRQn The positive number of the external interrupt to enable
- *
- * Enable a device specific interupt in the NVIC interrupt controller.
- * The interrupt number cannot be a negative value.
- */
-static __INLINE void NVIC_EnableIRQ(IRQn_Type IRQn)
-{
- NVIC->ISER[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* enable interrupt */
-}
-
-/**
- * @brief Disable the interrupt line for external interrupt specified
- *
- * @param IRQn The positive number of the external interrupt to disable
- *
- * Disable a device specific interupt in the NVIC interrupt controller.
- * The interrupt number cannot be a negative value.
- */
-static __INLINE void NVIC_DisableIRQ(IRQn_Type IRQn)
-{
- NVIC->ICER[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* disable interrupt */
-}
-
-/**
- * @brief Read the interrupt pending bit for a device specific interrupt source
- *
- * @param IRQn The number of the device specifc interrupt
- * @return 1 = interrupt pending, 0 = interrupt not pending
- *
- * Read the pending register in NVIC and return 1 if its status is pending,
- * otherwise it returns 0
- */
-static __INLINE uint32_t NVIC_GetPendingIRQ(IRQn_Type IRQn)
-{
- return((uint32_t) ((NVIC->ISPR[(uint32_t)(IRQn) >> 5] & (1 << ((uint32_t)(IRQn) & 0x1F)))?1:0)); /* Return 1 if pending else 0 */
-}
-
-/**
- * @brief Set the pending bit for an external interrupt
- *
- * @param IRQn The number of the interrupt for set pending
- *
- * Set the pending bit for the specified interrupt.
- * The interrupt number cannot be a negative value.
- */
-static __INLINE void NVIC_SetPendingIRQ(IRQn_Type IRQn)
-{
- NVIC->ISPR[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* set interrupt pending */
-}
-
-/**
- * @brief Clear the pending bit for an external interrupt
- *
- * @param IRQn The number of the interrupt for clear pending
- *
- * Clear the pending bit for the specified interrupt.
- * The interrupt number cannot be a negative value.
- */
-static __INLINE void NVIC_ClearPendingIRQ(IRQn_Type IRQn)
-{
- NVIC->ICPR[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* Clear pending interrupt */
-}
-
-/**
- * @brief Read the active bit for an external interrupt
- *
- * @param IRQn The number of the interrupt for read active bit
- * @return 1 = interrupt active, 0 = interrupt not active
- *
- * Read the active register in NVIC and returns 1 if its status is active,
- * otherwise it returns 0.
- */
-static __INLINE uint32_t NVIC_GetActive(IRQn_Type IRQn)
-{
- return((uint32_t)((NVIC->IABR[(uint32_t)(IRQn) >> 5] & (1 << ((uint32_t)(IRQn) & 0x1F)))?1:0)); /* Return 1 if active else 0 */
-}
-
-/**
- * @brief Set the priority for an interrupt
- *
- * @param IRQn The number of the interrupt for set priority
- * @param priority The priority to set
- *
- * Set the priority for the specified interrupt. The interrupt
- * number can be positive to specify an external (device specific)
- * interrupt, or negative to specify an internal (core) interrupt.
- *
- * Note: The priority cannot be set for every core interrupt.
- */
-static __INLINE void NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority)
-{
- if(IRQn < 0) {
- SCB->SHP[((uint32_t)(IRQn) & 0xF)-4] = ((priority << (8 - __NVIC_PRIO_BITS)) & 0xff); } /* set Priority for Cortex-M3 System Interrupts */
- else {
- NVIC->IP[(uint32_t)(IRQn)] = ((priority << (8 - __NVIC_PRIO_BITS)) & 0xff); } /* set Priority for device specific Interrupts */
-}
-
-/**
- * @brief Read the priority for an interrupt
- *
- * @param IRQn The number of the interrupt for get priority
- * @return The priority for the interrupt
- *
- * Read the priority for the specified interrupt. The interrupt
- * number can be positive to specify an external (device specific)
- * interrupt, or negative to specify an internal (core) interrupt.
- *
- * The returned priority value is automatically aligned to the implemented
- * priority bits of the microcontroller.
- *
- * Note: The priority cannot be set for every core interrupt.
- */
-static __INLINE uint32_t NVIC_GetPriority(IRQn_Type IRQn)
-{
-
- if(IRQn < 0) {
- return((uint32_t)(SCB->SHP[((uint32_t)(IRQn) & 0xF)-4] >> (8 - __NVIC_PRIO_BITS))); } /* get priority for Cortex-M3 system interrupts */
- else {
- return((uint32_t)(NVIC->IP[(uint32_t)(IRQn)] >> (8 - __NVIC_PRIO_BITS))); } /* get priority for device specific interrupts */
-}
-
-
-/**
- * @brief Encode the priority for an interrupt
- *
- * @param PriorityGroup The used priority group
- * @param PreemptPriority The preemptive priority value (starting from 0)
- * @param SubPriority The sub priority value (starting from 0)
- * @return The encoded priority for the interrupt
- *
- * Encode the priority for an interrupt with the given priority group,
- * preemptive priority value and sub priority value.
- * In case of a conflict between priority grouping and available
- * priority bits (__NVIC_PRIO_BITS) the samllest possible priority group is set.
- *
- * The returned priority value can be used for NVIC_SetPriority(...) function
- */
-static __INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority)
-{
- uint32_t PriorityGroupTmp = (PriorityGroup & 0x07); /* only values 0..7 are used */
- uint32_t PreemptPriorityBits;
- uint32_t SubPriorityBits;
-
- PreemptPriorityBits = ((7 - PriorityGroupTmp) > __NVIC_PRIO_BITS) ? __NVIC_PRIO_BITS : 7 - PriorityGroupTmp;
- SubPriorityBits = ((PriorityGroupTmp + __NVIC_PRIO_BITS) < 7) ? 0 : PriorityGroupTmp - 7 + __NVIC_PRIO_BITS;
-
- return (
- ((PreemptPriority & ((1 << (PreemptPriorityBits)) - 1)) << SubPriorityBits) |
- ((SubPriority & ((1 << (SubPriorityBits )) - 1)))
- );
-}
-
-
-/**
- * @brief Decode the priority of an interrupt
- *
- * @param Priority The priority for the interrupt
- * @param PriorityGroup The used priority group
- * @param pPreemptPriority The preemptive priority value (starting from 0)
- * @param pSubPriority The sub priority value (starting from 0)
- *
- * Decode an interrupt priority value with the given priority group to
- * preemptive priority value and sub priority value.
- * In case of a conflict between priority grouping and available
- * priority bits (__NVIC_PRIO_BITS) the samllest possible priority group is set.
- *
- * The priority value can be retrieved with NVIC_GetPriority(...) function
- */
-static __INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* pPreemptPriority, uint32_t* pSubPriority)
-{
- uint32_t PriorityGroupTmp = (PriorityGroup & 0x07); /* only values 0..7 are used */
- uint32_t PreemptPriorityBits;
- uint32_t SubPriorityBits;
-
- PreemptPriorityBits = ((7 - PriorityGroupTmp) > __NVIC_PRIO_BITS) ? __NVIC_PRIO_BITS : 7 - PriorityGroupTmp;
- SubPriorityBits = ((PriorityGroupTmp + __NVIC_PRIO_BITS) < 7) ? 0 : PriorityGroupTmp - 7 + __NVIC_PRIO_BITS;
-
- *pPreemptPriority = (Priority >> SubPriorityBits) & ((1 << (PreemptPriorityBits)) - 1);
- *pSubPriority = (Priority ) & ((1 << (SubPriorityBits )) - 1);
-}
-
-
-
-/* ################################## SysTick function ############################################ */
-
-#if (!defined (__Vendor_SysTickConfig)) || (__Vendor_SysTickConfig == 0)
-
-/**
- * @brief Initialize and start the SysTick counter and its interrupt.
- *
- * @param ticks number of ticks between two interrupts
- * @return 1 = failed, 0 = successful
- *
- * Initialise the system tick timer and its interrupt and start the
- * system tick timer / counter in free running mode to generate
- * periodical interrupts.
- */
-static __INLINE uint32_t SysTick_Config(uint32_t ticks)
-{
- if (ticks > SysTick_LOAD_RELOAD_Msk) return (1); /* Reload value impossible */
-
- SysTick->LOAD = (ticks & SysTick_LOAD_RELOAD_Msk) - 1; /* set reload register */
- NVIC_SetPriority (SysTick_IRQn, (1<<__NVIC_PRIO_BITS) - 1); /* set Priority for Cortex-M0 System Interrupts */
- SysTick->VAL = 0; /* Load the SysTick Counter Value */
- SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk |
- SysTick_CTRL_TICKINT_Msk |
- SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */
- return (0); /* Function successful */
-}
-
-#endif
-
-
-
-
-/* ################################## Reset function ############################################ */
-
-/**
- * @brief Initiate a system reset request.
- *
- * Initiate a system reset request to reset the MCU
- */
-static __INLINE void NVIC_SystemReset(void)
-{
- SCB->AIRCR = ((0x5FA << SCB_AIRCR_VECTKEY_Pos) |
- (SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) |
- SCB_AIRCR_SYSRESETREQ_Msk); /* Keep priority group unchanged */
- __DSB(); /* Ensure completion of memory access */
- while(1); /* wait until reset */
-}
-
-/*@}*/ /* end of group CMSIS_CM3_Core_FunctionInterface */
-
-
-
-/* ##################################### Debug In/Output function ########################################### */
-
-/** @addtogroup CMSIS_CM3_CoreDebugInterface CMSIS CM3 Core Debug Interface
- Core Debug Interface containing:
- - Core Debug Receive / Transmit Functions
- - Core Debug Defines
- - Core Debug Variables
-*/
-/*@{*/
-
-extern volatile int ITM_RxBuffer; /*!< variable to receive characters */
-#define ITM_RXBUFFER_EMPTY 0x5AA55AA5 /*!< value identifying ITM_RxBuffer is ready for next character */
-
-
-/**
- * @brief Outputs a character via the ITM channel 0
- *
- * @param ch character to output
- * @return character to output
- *
- * The function outputs a character via the ITM channel 0.
- * The function returns when no debugger is connected that has booked the output.
- * It is blocking when a debugger is connected, but the previous character send is not transmitted.
- */
-static __INLINE uint32_t ITM_SendChar (uint32_t ch)
-{
- if ((CoreDebug->DEMCR & CoreDebug_DEMCR_TRCENA_Msk) && /* Trace enabled */
- (ITM->TCR & ITM_TCR_ITMENA_Msk) && /* ITM enabled */
- (ITM->TER & (1ul << 0) ) ) /* ITM Port #0 enabled */
- {
- while (ITM->PORT[0].u32 == 0);
- ITM->PORT[0].u8 = (uint8_t) ch;
- }
- return (ch);
-}
-
-
-/**
- * @brief Inputs a character via variable ITM_RxBuffer
- *
- * @return received character, -1 = no character received
- *
- * The function inputs a character via variable ITM_RxBuffer.
- * The function returns when no debugger is connected that has booked the output.
- * It is blocking when a debugger is connected, but the previous character send is not transmitted.
- */
-static __INLINE int ITM_ReceiveChar (void) {
- int ch = -1; /* no character available */
-
- if (ITM_RxBuffer != ITM_RXBUFFER_EMPTY) {
- ch = ITM_RxBuffer;
- ITM_RxBuffer = ITM_RXBUFFER_EMPTY; /* ready for next character */
- }
-
- return (ch);
-}
-
-
-/**
- * @brief Check if a character via variable ITM_RxBuffer is available
- *
- * @return 1 = character available, 0 = no character available
- *
- * The function checks variable ITM_RxBuffer whether a character is available or not.
- * The function returns '1' if a character is available and '0' if no character is available.
- */
-static __INLINE int ITM_CheckChar (void) {
-
- if (ITM_RxBuffer == ITM_RXBUFFER_EMPTY) {
- return (0); /* no character available */
- } else {
- return (1); /* character available */
- }
-}
-
-/*@}*/ /* end of group CMSIS_CM3_core_DebugInterface */
-
-
-#ifdef __cplusplus
-}
-#endif
-
-/*@}*/ /* end of group CMSIS_CM3_core_definitions */
-
-#endif /* __CM3_CORE_H__ */
-
-/*lint -restore */
diff --git a/os/hal/platforms/STM32L1xx/hal_lld.h b/os/hal/platforms/STM32L1xx/hal_lld.h index ca69ac784..97cfde0b7 100644 --- a/os/hal/platforms/STM32L1xx/hal_lld.h +++ b/os/hal/platforms/STM32L1xx/hal_lld.h @@ -367,7 +367,7 @@ /**
* @brief Maximum HSECLK at current voltage setting.
*/
-#define STM32_HSECLK_MAX 32000000
+#define STM32_HSECLK_MAX 32000000#if
/**
* @brief Maximum SYSCLK at current voltage setting.
@@ -430,7 +430,7 @@ #if (STM32_HSECLK < 1000000) || (STM32_HSECLK > STM32_HSECLK_MAX)
#error "STM32_HSECLK outside acceptable range (1MHz...STM32_HSECLK_MAX)"
#endif
-#else /* !#if STM32_HSE_ENABLED */
+#else /* !STM32_HSE_ENABLED */
#if (STM32_SW == STM32_SW_HSE) || \
((STM32_SW == STM32_SW_PLL) && \
(STM32_PLLSRC == STM32_PLLSRC_HSE)) || \
@@ -440,7 +440,7 @@ (STM_RTC_SOURCE == STM32_RTCSEL_HSEDIV)
#error "required HSE clock is not enabled"
#endif
-#endif /* !#if STM32_HSE_ENABLED */
+#endif /* !STM32_HSE_ENABLED */
/* LSI related checks.*/
#if STM32_LSI_ENABLED
diff --git a/os/hal/platforms/STM32L1xx/pal_lld.c b/os/hal/platforms/STM32L1xx/pal_lld.c deleted file mode 100644 index ee32d5dbc..000000000 --- a/os/hal/platforms/STM32L1xx/pal_lld.c +++ /dev/null @@ -1,193 +0,0 @@ -/*
- ChibiOS/RT - Copyright (C) 2006,2007,2008,2009,2010,
- 2011 Giovanni Di Sirio.
-
- This file is part of ChibiOS/RT.
-
- ChibiOS/RT is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 3 of the License, or
- (at your option) any later version.
-
- ChibiOS/RT is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-
-/**
- * @file STM32/pal_lld.c
- * @brief STM32 GPIO low level driver code.
- *
- * @addtogroup PAL
- * @{
- */
-
-#include "ch.h"
-#include "hal.h"
-
-#if HAL_USE_PAL || defined(__DOXYGEN__)
-
-#if STM32_HAS_GPIOG
-#define APB2_EN_MASK (RCC_APB2ENR_IOPAEN | RCC_APB2ENR_IOPBEN | \
- RCC_APB2ENR_IOPCEN | RCC_APB2ENR_IOPDEN | \
- RCC_APB2ENR_IOPEEN | RCC_APB2ENR_IOPFEN | \
- RCC_APB2ENR_IOPGEN | RCC_APB2ENR_AFIOEN)
-#elif STM32_HAS_GPIOE
-#define APB2_EN_MASK (RCC_APB2ENR_IOPAEN | RCC_APB2ENR_IOPBEN | \
- RCC_APB2ENR_IOPCEN | RCC_APB2ENR_IOPDEN | \
- RCC_APB2ENR_IOPEEN | RCC_APB2ENR_AFIOEN)
-#else
-#define APB2_EN_MASK (RCC_APB2ENR_IOPAEN | RCC_APB2ENR_IOPBEN | \
- RCC_APB2ENR_IOPCEN | RCC_APB2ENR_IOPDEN | \
- RCC_APB2ENR_AFIOEN)
-#endif
-
-/*===========================================================================*/
-/* Driver exported variables. */
-/*===========================================================================*/
-
-/*===========================================================================*/
-/* Driver local variables. */
-/*===========================================================================*/
-
-/*===========================================================================*/
-/* Driver local functions. */
-/*===========================================================================*/
-
-static void initgpio(GPIO_TypeDef *gpiop, const stm32_gpio_setup_t *config) {
-
- gpiop->MODER = config->moder;
- gpiop->OTYPER = config->otyper;
- gpiop->OSPEEDR = config->ospeedr;
- gpiop->PUPDR = config->pupdr;
- gpiop->ODR = config->odr;
- gpiop->AFRL = 0;
- gpiop->AFRH = 0;
-}
-
-/*===========================================================================*/
-/* Driver interrupt handlers. */
-/*===========================================================================*/
-
-/*===========================================================================*/
-/* Driver exported functions. */
-/*===========================================================================*/
-
-/**
- * @brief STM32 I/O ports configuration.
- * @details Ports A-D(E, F, G) clocks enabled, AFIO clock enabled.
- *
- * @param[in] config the STM32 ports configuration
- *
- * @notapi
- */
-void _pal_lld_init(const PALConfig *config) {
-
- /*
- * Enables the GPIO related clocks.
- */
- RCC->AHBENR |= RCC_AHBENR_GPIOAEN | RCC_AHBENR_GPIOBEN |
- RCC_AHBENR_GPIOCEN | RCC_AHBENR_GPIODEN |
- RCC_AHBENR_GPIOEEN | RCC_AHBENR_GPIOHEN;
- RCC->AHBLPENR |= RCC_AHBLPENR_GPIOALPEN | RCC_AHBLPENR_GPIOBLPEN |
- RCC_AHBLPENR_GPIOCLPEN | RCC_AHBLPENR_GPIODLPEN |
- RCC_AHBLPENR_GPIOELPEN | RCC_AHBLPENR_GPIOHLPEN;
-
- /*
- * Initial GPIO setup.
- */
- initgpio(GPIOA, &config->PAData);
- initgpio(GPIOB, &config->PBData);
- initgpio(GPIOC, &config->PCData);
- initgpio(GPIOD, &config->PDData);
-#if STM32_HAS_GPIOE
- initgpio(GPIOE, &config->PEData);
-#endif
-#if STM32_HAS_GPIOF
- initgpio(GPIOF, &config->PFData);
-#endif
-#if STM32_HAS_GPIOG
- initgpio(GPIOG, &config->PGData);
-#endif
-#if STM32_HAS_GPIOH
- initgpio(GPIOH, &config->PHData);
-#endif
-}
-
-/**
- * @brief Pads mode setup.
- * @details This function programs a pads group belonging to the same port
- * with the specified mode.
- * @note This function is not meant to be invoked directly by the
- * application code.
- * @note @p PAL_MODE_UNCONNECTED is implemented as push pull output at 2MHz.
- * @note Writing on pads programmed as pull-up or pull-down has the side
- * effect to modify the resistor setting because the output latched
- * data is used for the resistor selection.
- *
- * @param[in] port the port identifier
- * @param[in] mask the group mask
- * @param[in] mode the mode
- *
- * @notapi
- */
-void _pal_lld_setgroupmode(ioportid_t port,
- ioportmask_t mask,
- uint_fast8_t mode) {
-#if 0
- static const uint8_t cfgtab[] = {
- 4, /* PAL_MODE_RESET, implemented as input.*/
- 2, /* PAL_MODE_UNCONNECTED, implemented as push pull output 2MHz.*/
- 4, /* PAL_MODE_INPUT */
- 8, /* PAL_MODE_INPUT_PULLUP */
- 8, /* PAL_MODE_INPUT_PULLDOWN */
- 0, /* PAL_MODE_INPUT_ANALOG */
- 3, /* PAL_MODE_OUTPUT_PUSHPULL, 50MHz.*/
- 7, /* PAL_MODE_OUTPUT_OPENDRAIN, 50MHz.*/
- 8, /* Reserved.*/
- 8, /* Reserved.*/
- 8, /* Reserved.*/
- 8, /* Reserved.*/
- 8, /* Reserved.*/
- 8, /* Reserved.*/
- 8, /* Reserved.*/
- 8, /* Reserved.*/
- 0xB, /* PAL_MODE_STM32_ALTERNATE_PUSHPULL, 50MHz.*/
- 0xF, /* PAL_MODE_STM32_ALTERNATE_OPENDRAIN, 50MHz.*/
- };
- uint32_t mh, ml, crh, crl, cfg;
- unsigned i;
-
- if (mode == PAL_MODE_INPUT_PULLUP)
- port->BSRR = mask;
- else if (mode == PAL_MODE_INPUT_PULLDOWN)
- port->BRR = mask;
- cfg = cfgtab[mode];
- mh = ml = crh = crl = 0;
- for (i = 0; i < 8; i++) {
- ml <<= 4;
- mh <<= 4;
- crl <<= 4;
- crh <<= 4;
- if ((mask & 0x0080) == 0)
- ml |= 0xf;
- else
- crl |= cfg;
- if ((mask & 0x8000) == 0)
- mh |= 0xf;
- else
- crh |= cfg;
- mask <<= 1;
- }
- port->CRH = (port->CRH & mh) | crh;
- port->CRL = (port->CRL & ml) | crl;
-#endif
-}
-
-#endif /* HAL_USE_PAL */
-
-/** @} */
diff --git a/os/hal/platforms/STM32L1xx/platform.mk b/os/hal/platforms/STM32L1xx/platform.mk index f870811fc..348722671 100644 --- a/os/hal/platforms/STM32L1xx/platform.mk +++ b/os/hal/platforms/STM32L1xx/platform.mk @@ -1,6 +1,18 @@ -# List of all the STM32 platform files.
+# List of all the STM32L1xx platform files.
PLATFORMSRC = ${CHIBIOS}/os/hal/platforms/STM32L1xx/hal_lld.c \
- ${CHIBIOS}/os/hal/platforms/STM32L1xx/stm32_dma.c
+ ${CHIBIOS}/os/hal/platforms/STM32/gpt_lld.c \
+ ${CHIBIOS}/os/hal/platforms/STM32/icu_lld.c \
+ ${CHIBIOS}/os/hal/platforms/STM32/pwm_lld.c \
+ ${CHIBIOS}/os/hal/platforms/STM32/serial_lld.c \
+ ${CHIBIOS}/os/hal/platforms/STM32/GPIOv2/pal_lld.c \
+ ${CHIBIOS}/os/hal/platforms/STM32/DMAv1/spi_lld.c \
+ ${CHIBIOS}/os/hal/platforms/STM32/DMAv1/uart_lld.c \
+ ${CHIBIOS}/os/hal/platforms/STM32/DMAv1/stm32_dma.c \
+ ${CHIBIOS}/os/hal/platforms/STM32/USBv1/usb_lld.c
# Required include directories
-PLATFORMINC = ${CHIBIOS}/os/hal/platforms/STM32L1xx
+PLATFORMINC = ${CHIBIOS}/os/hal/platforms/STM32L1xx \
+ ${CHIBIOS}/os/hal/platforms/STM32 \
+ ${CHIBIOS}/os/hal/platforms/STM32/GPIOv2 \
+ ${CHIBIOS}/os/hal/platforms/STM32/DMAv1 \
+ ${CHIBIOS}/os/hal/platforms/STM32/USBv1
diff --git a/os/hal/platforms/STM32L1xx/stm32_dma.c b/os/hal/platforms/STM32L1xx/stm32_dma.c deleted file mode 100644 index 2232df448..000000000 --- a/os/hal/platforms/STM32L1xx/stm32_dma.c +++ /dev/null @@ -1,468 +0,0 @@ -/*
- ChibiOS/RT - Copyright (C) 2006,2007,2008,2009,2010,
- 2011 Giovanni Di Sirio.
-
- This file is part of ChibiOS/RT.
-
- ChibiOS/RT is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 3 of the License, or
- (at your option) any later version.
-
- ChibiOS/RT is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-
-/**
- * @file stm32_dma.c
- * @brief STM32 DMA helper driver code.
- *
- * @addtogroup STM32_DMA
- * @details DMA sharing helper driver. In the STM32 the DMA channels are a
- * shared resource, this driver allows to allocate and free DMA
- * channels at runtime in order to allow all the other device
- * drivers to coordinate the access to the resource.
- * @note The DMA ISR handlers are all declared into this module because
- * sharing, the various device drivers can associate a callback to
- * IRSs when allocating channels.
- * @{
- */
-
-#include "ch.h"
-#include "hal.h"
-
-#if defined(STM32_DMA_REQUIRED) || defined(__DOXYGEN__)
-
-/*===========================================================================*/
-/* Driver exported variables. */
-/*===========================================================================*/
-
-/*===========================================================================*/
-/* Driver local variables and types. */
-/*===========================================================================*/
-
-/**
- * @brief DMA ISR redirector type.
- */
-typedef struct {
- stm32_dmaisr_t dmaisrfunc;
- void *dmaisrparam;
-} dma_isr_redir_t;
-
-static uint32_t dmamsk1;
-static dma_isr_redir_t dma1[7];
-
-#if STM32_HAS_DMA2
-static uint32_t dmamsk2;
-static dma_isr_redir_t dma2[5];
-#endif
-
-/*===========================================================================*/
-/* Driver local functions. */
-/*===========================================================================*/
-
-/*===========================================================================*/
-/* Driver interrupt handlers. */
-/*===========================================================================*/
-
-/**
- * @brief DMA1 channel 1 shared interrupt handler.
- *
- * @isr
- */
-CH_IRQ_HANDLER(DMA1_Ch1_IRQHandler) {
- uint32_t isr;
-
- CH_IRQ_PROLOGUE();
-
- isr = STM32_DMA1->ISR >> (STM32_DMA_CHANNEL_1 * 4);
- dmaClearChannel(STM32_DMA1, STM32_DMA_CHANNEL_1);
- if (dma1[0].dmaisrfunc)
- dma1[0].dmaisrfunc(dma1[0].dmaisrparam, isr);
-
- CH_IRQ_EPILOGUE();
-}
-
-/**
- * @brief DMA1 channel 2 shared interrupt handler.
- *
- * @isr
- */
-CH_IRQ_HANDLER(DMA1_Ch2_IRQHandler) {
- uint32_t isr;
-
- CH_IRQ_PROLOGUE();
-
- isr = STM32_DMA1->ISR >> (STM32_DMA_CHANNEL_2 * 4);
- dmaClearChannel(STM32_DMA1, STM32_DMA_CHANNEL_2);
- if (dma1[1].dmaisrfunc)
- dma1[1].dmaisrfunc(dma1[1].dmaisrparam, isr);
-
- CH_IRQ_EPILOGUE();
-}
-
-/**
- * @brief DMA1 channel 3 shared interrupt handler.
- *
- * @isr
- */
-CH_IRQ_HANDLER(DMA1_Ch3_IRQHandler) {
- uint32_t isr;
-
- CH_IRQ_PROLOGUE();
-
- isr = STM32_DMA1->ISR >> (STM32_DMA_CHANNEL_3 * 4);
- dmaClearChannel(STM32_DMA1, STM32_DMA_CHANNEL_3);
- if (dma1[2].dmaisrfunc)
- dma1[2].dmaisrfunc(dma1[2].dmaisrparam, isr);
-
- CH_IRQ_EPILOGUE();
-}
-
-/**
- * @brief DMA1 channel 4 shared interrupt handler.
- *
- * @isr
- */
-CH_IRQ_HANDLER(DMA1_Ch4_IRQHandler) {
- uint32_t isr;
-
- CH_IRQ_PROLOGUE();
-
- isr = STM32_DMA1->ISR >> (STM32_DMA_CHANNEL_4 * 4);
- dmaClearChannel(STM32_DMA1, STM32_DMA_CHANNEL_4);
- if (dma1[3].dmaisrfunc)
- dma1[3].dmaisrfunc(dma1[3].dmaisrparam, isr);
-
- CH_IRQ_EPILOGUE();
-}
-
-/**
- * @brief DMA1 channel 5 shared interrupt handler.
- *
- * @isr
- */
-CH_IRQ_HANDLER(DMA1_Ch5_IRQHandler) {
- uint32_t isr;
-
- CH_IRQ_PROLOGUE();
-
- isr = STM32_DMA1->ISR >> (STM32_DMA_CHANNEL_5 * 4);
- dmaClearChannel(STM32_DMA1, STM32_DMA_CHANNEL_5);
- if (dma1[4].dmaisrfunc)
- dma1[4].dmaisrfunc(dma1[4].dmaisrparam, isr);
-
- CH_IRQ_EPILOGUE();
-}
-
-/**
- * @brief DMA1 channel 6 shared interrupt handler.
- *
- * @isr
- */
-CH_IRQ_HANDLER(DMA1_Ch6_IRQHandler) {
- uint32_t isr;
-
- CH_IRQ_PROLOGUE();
-
- isr = STM32_DMA1->ISR >> (STM32_DMA_CHANNEL_6 * 4);
- dmaClearChannel(STM32_DMA1, STM32_DMA_CHANNEL_6);
- if (dma1[5].dmaisrfunc)
- dma1[5].dmaisrfunc(dma1[5].dmaisrparam, isr);
-
- CH_IRQ_EPILOGUE();
-}
-
-/**
- * @brief DMA1 channel 7 shared interrupt handler.
- *
- * @isr
- */
-CH_IRQ_HANDLER(DMA1_Ch7_IRQHandler) {
- uint32_t isr;
-
- CH_IRQ_PROLOGUE();
-
- isr = STM32_DMA1->ISR >> (STM32_DMA_CHANNEL_7 * 4);
- dmaClearChannel(STM32_DMA1, STM32_DMA_CHANNEL_7);
- if (dma1[6].dmaisrfunc)
- dma1[6].dmaisrfunc(dma1[6].dmaisrparam, isr);
-
- CH_IRQ_EPILOGUE();
-}
-
-#if STM32_HAS_DMA2 || defined(__DOXYGEN__)
-/**
- * @brief DMA2 channel 1 shared interrupt handler.
- *
- * @isr
- */
-CH_IRQ_HANDLER(DMA2_Ch1_IRQHandler) {
- uint32_t isr;
-
- CH_IRQ_PROLOGUE();
-
- isr = STM32_DMA2->ISR >> (STM32_DMA_CHANNEL_1 * 4);
- dmaClearChannel(STM32_DMA2, STM32_DMA_CHANNEL_1);
- if (dma2[0].dmaisrfunc)
- dma2[0].dmaisrfunc(dma2[0].dmaisrparam, isr);
-
- CH_IRQ_EPILOGUE();
-}
-
-/**
- * @brief DMA2 channel 2 shared interrupt handler.
- *
- * @isr
- */
-CH_IRQ_HANDLER(DMA2_Ch2_IRQHandler) {
- uint32_t isr;
-
- CH_IRQ_PROLOGUE();
-
- isr = STM32_DMA2->ISR >> (STM32_DMA_CHANNEL_2 * 4);
- dmaClearChannel(STM32_DMA2, STM32_DMA_CHANNEL_2);
- if (dma2[1].dmaisrfunc)
- dma2[1].dmaisrfunc(dma2[1].dmaisrparam, isr);
-
- CH_IRQ_EPILOGUE();
-}
-
-/**
- * @brief DMA2 channel 3 shared interrupt handler.
- *
- * @isr
- */
-CH_IRQ_HANDLER(DMA2_Ch3_IRQHandler) {
- uint32_t isr;
-
- CH_IRQ_PROLOGUE();
-
- isr = STM32_DMA2->ISR >> (STM32_DMA_CHANNEL_3 * 4);
- dmaClearChannel(STM32_DMA2, STM32_DMA_CHANNEL_3);
- if (dma2[2].dmaisrfunc)
- dma2[2].dmaisrfunc(dma2[2].dmaisrparam, isr);
-
- CH_IRQ_EPILOGUE();
-}
-
-#if defined(STM32F10X_CL) || defined(__DOXYGEN__)
-/**
- * @brief DMA2 channel 4 shared interrupt handler.
- *
- * @isr
- */
-CH_IRQ_HANDLER(DMA2_Ch4_IRQHandler) {
- uint32_t isr;
-
- CH_IRQ_PROLOGUE();
-
- isr = STM32_DMA2->ISR >> (STM32_DMA_CHANNEL_4 * 4);
- dmaClearChannel(STM32_DMA2, STM32_DMA_CHANNEL_4);
- if (dma2[3].dmaisrfunc)
- dma2[3].dmaisrfunc(dma2[3].dmaisrparam, isr);
-
- CH_IRQ_EPILOGUE();
-}
-
-/**
- * @brief DMA2 channel 5 shared interrupt handler.
- *
- * @isr
- */
-CH_IRQ_HANDLER(DMA2_Ch5_IRQHandler) {
- uint32_t isr;
-
- CH_IRQ_PROLOGUE();
-
- isr = STM32_DMA2->ISR >> (STM32_DMA_CHANNEL_5 * 4);
- dmaClearChannel(STM32_DMA2, STM32_DMA_CHANNEL_5);
- if (dma2[4].dmaisrfunc)
- dma2[4].dmaisrfunc(dma2[4].dmaisrparam, isr);
-
- CH_IRQ_EPILOGUE();
-}
-
-#else /* !STM32F10X_CL */
-/**
- * @brief DMA2 channels 4 and 5 shared interrupt handler.
- * @note This IRQ is shared between DMA2 channels 4 and 5 so it is a
- * bit less efficient because an extra check.
- *
- * @isr
- */
-CH_IRQ_HANDLER(DMA2_Ch4_5_IRQHandler) {
- uint32_t isr;
-
- CH_IRQ_PROLOGUE();
-
- /* Check on channel 4.*/
- isr = STM32_DMA2->ISR >> (STM32_DMA_CHANNEL_5 * 4);
- if (isr & DMA_ISR_GIF1) {
- dmaClearChannel(STM32_DMA2, STM32_DMA_CHANNEL_5);
- if (dma2[3].dmaisrfunc)
- dma2[3].dmaisrfunc(dma2[3].dmaisrparam, isr);
- }
-
- /* Check on channel 5.*/
- isr = STM32_DMA2->ISR >> (STM32_DMA_CHANNEL_4 * 4);
- if (isr & DMA_ISR_GIF1) {
- dmaClearChannel(STM32_DMA2, STM32_DMA_CHANNEL_5);
- if (dma2[4].dmaisrfunc)
- dma2[4].dmaisrfunc(dma2[4].dmaisrparam, isr);
- }
-
- CH_IRQ_EPILOGUE();
-}
-#endif /* !STM32F10X_CL */
-#endif /* STM32_HAS_DMA2 */
-
-/*===========================================================================*/
-/* Driver exported functions. */
-/*===========================================================================*/
-
-/**
- * @brief STM32 DMA helper initialization.
- *
- * @init
- */
-void dmaInit(void) {
- int i;
-
- dmamsk1 = 0;
- for (i = STM32_DMA_CHANNEL_7; i >= STM32_DMA_CHANNEL_1; i--) {
- dmaDisableChannel(STM32_DMA1, i);
- dma1[i].dmaisrfunc = NULL;
- }
- STM32_DMA1->IFCR = 0xFFFFFFFF;
-#if STM32_HAS_DMA2
- dmamsk2 = 0;
- for (i = STM32_DMA_CHANNEL_5; i >= STM32_DMA_CHANNEL_1; i--) {
- dmaDisableChannel(STM32_DMA2, i);
- dma2[i].dmaisrfunc = NULL;
- }
- STM32_DMA1->IFCR = 0xFFFFFFFF;
-#endif
-}
-
-/**
- * @brief Allocates a DMA channel.
- * @details The channel is allocated and, if required, the DMA clock enabled.
- * Trying to allocate a channel already allocated is an illegal
- * operation and is trapped if assertions are enabled.
- * @pre The channel must not be already in use.
- * @post The channel is allocated and the default ISR handler redirected
- * to the specified function.
- * @post The channel must be freed using @p dmaRelease() before it can
- * be reused with another peripheral.
- * @note This function can be invoked in both ISR or thread context.
- *
- * @param[in] dma DMA controller id
- * @param[in] channel requested channel id
- * @param[in] func handling function pointer, can be @p NULL
- * @param[in] param a parameter to be passed to the handling function
- * @return The operation status.
- * @retval FALSE operation successfully allocated.
- * @retval TRUE the channel was already in use.
- *
- * @special
- */
-void dmaAllocate(uint32_t dma, uint32_t channel,
- stm32_dmaisr_t func, void *param) {
-
- chDbgCheck(func != NULL, "dmaAllocate");
-
-#if STM32_HAS_DMA2
- switch (dma) {
- case STM32_DMA1_ID:
-#else
- (void)dma;
-#endif
- /* Check if the channel is already taken.*/
- chDbgAssert((dmamsk1 & (1 << channel)) == 0,
- "dmaAllocate(), #1", "already allocated");
-
- /* If the DMA unit was idle then the clock is enabled.*/
- if (dmamsk1 == 0) {
- RCC->AHBENR |= RCC_AHBENR_DMA1EN;
- DMA1->IFCR = 0x0FFFFFFF;
- }
-
- dmamsk1 |= 1 << channel;
- dma1[channel].dmaisrfunc = func;
- dma1[channel].dmaisrparam = param;
-#if STM32_HAS_DMA2
- break;
- case STM32_DMA2_ID:
- /* Check if the channel is already taken.*/
- chDbgAssert((dmamsk2 & (1 << channel)) == 0,
- "dmaAllocate(), #2", "already allocated");
-
- /* If the DMA unit was idle then the clock is enabled.*/
- if (dmamsk2 == 0) {
- RCC->AHBENR |= RCC_AHBENR_DMA2EN;
- DMA2->IFCR = 0x0FFFFFFF;
- }
-
- dmamsk2 |= 1 << channel;
- dma2[channel].dmaisrfunc = func;
- dma2[channel].dmaisrparam = param;
- break;
- }
-#endif
-}
-
-/**
- * @brief Releases a DMA channel.
- * @details The channel is freed and, if required, the DMA clock disabled.
- * Trying to release a unallocated channel is an illegal operation
- * and is trapped if assertions are enabled.
- * @pre The channel must have been allocated using @p dmaRequest().
- * @post The channel is again available.
- * @note This function can be invoked in both ISR or thread context.
- *
- * @param[in] dma DMA controller id
- * @param[in] channel requested channel id
- *
- * @special
- */
-void dmaRelease(uint32_t dma, uint32_t channel) {
-
-#if STM32_HAS_DMA2
- switch (dma) {
- case STM32_DMA1_ID:
-#else
- (void)dma;
-#endif
- /* Check if the channel is not taken.*/
- chDbgAssert((dmamsk1 & (1 << channel)) != 0,
- "dmaRelease(), #1", "not allocated");
-
- dma1[channel].dmaisrfunc = NULL;
- dmamsk1 &= ~(1 << channel);
- if (dmamsk1 == 0)
- RCC->AHBENR &= ~RCC_AHBENR_DMA1EN;
-#if STM32_HAS_DMA2
- break;
- case STM32_DMA2_ID:
- /* Check if the channel is not taken.*/
- chDbgAssert((dmamsk2 & (1 << channel)) != 0,
- "dmaRelease(), #2", "not allocated");
-
- dma2[channel].dmaisrfunc = NULL;
- dmamsk2 &= ~(1 << channel);
- if (dmamsk2 == 0)
- RCC->AHBENR &= ~RCC_AHBENR_DMA2EN;
- break;
- }
-#endif
-}
-
-#endif /* STM32_DMA_REQUIRED */
-
-/** @} */
diff --git a/os/hal/platforms/STM32L1xx/stm32_dma.h b/os/hal/platforms/STM32L1xx/stm32_dma.h deleted file mode 100644 index 66a2f8c69..000000000 --- a/os/hal/platforms/STM32L1xx/stm32_dma.h +++ /dev/null @@ -1,280 +0,0 @@ -/*
- ChibiOS/RT - Copyright (C) 2006,2007,2008,2009,2010,
- 2011 Giovanni Di Sirio.
-
- This file is part of ChibiOS/RT.
-
- ChibiOS/RT is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 3 of the License, or
- (at your option) any later version.
-
- ChibiOS/RT is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-
-/**
- * @file stm32_dma.h
- * @brief STM32 DMA helper driver header.
- * @note This file requires definitions from the ST STM32 header file
- * stm3232f10x.h.
- *
- * @addtogroup STM32_DMA
- * @{
- */
-
-#ifndef _STM32_DMA_H_
-#define _STM32_DMA_H_
-
-/*===========================================================================*/
-/* Driver constants. */
-/*===========================================================================*/
-
-/** @brief DMA1 identifier.*/
-#define STM32_DMA1_ID 0
-
-/** @brief DMA2 identifier.*/
-#if STM32_HAS_DMA2 || defined(__DOXYGEN__)
-#define STM32_DMA2_ID 1
-#endif
-
-/*===========================================================================*/
-/* Driver pre-compile time settings. */
-/*===========================================================================*/
-
-/*===========================================================================*/
-/* Derived constants and error checks. */
-/*===========================================================================*/
-
-/*===========================================================================*/
-/* Driver data structures and types. */
-/*===========================================================================*/
-
-/**
- * @brief STM32 DMA channel memory structure type.
- */
-typedef struct {
- volatile uint32_t CCR;
- volatile uint32_t CNDTR;
- volatile uint32_t CPAR;
- volatile uint32_t CMAR;
- volatile uint32_t dummy;
-} stm32_dma_channel_t;
-
-/**
- * @brief STM32 DMA subsystem memory structure type.
- * @note This structure has been redefined here because it is convenient to
- * have the channels organized as an array, the ST header does not
- * do that.
- */
-typedef struct {
- volatile uint32_t ISR;
- volatile uint32_t IFCR;
- stm32_dma_channel_t channels[7];
-} stm32_dma_t;
-
-/**
- * @brief STM32 DMA ISR function type.
- *
- * @param[in] p parameter for the registered function
- * @param[in] flags pre-shifted content of the ISR register
- */
-typedef void (*stm32_dmaisr_t)(void *p, uint32_t flags);
-
-/*===========================================================================*/
-/* Driver macros. */
-/*===========================================================================*/
-
-/** DMA1 registers block numeric address.*/
-#define STM32_DMA1_BASE (AHBPERIPH_BASE + 0x0000)
-/** Pointer to the DMA1 registers block.*/
-#define STM32_DMA1 ((stm32_dma_t *)STM32_DMA1_BASE)
-/** Pointer to the DMA1 channel 1 registers block.*/
-#define STM32_DMA1_CH1 (&STM32_DMA1->channels[0])
-/** Pointer to the DMA1 channel 2 registers block.*/
-#define STM32_DMA1_CH2 (&STM32_DMA1->channels[1])
-/** Pointer to the DMA1 channel 3 registers block.*/
-#define STM32_DMA1_CH3 (&STM32_DMA1->channels[2])
-/** Pointer to the DMA1 channel 4 registers block.*/
-#define STM32_DMA1_CH4 (&STM32_DMA1->channels[3])
-/** Pointer to the DMA1 channel 5 registers block.*/
-#define STM32_DMA1_CH5 (&STM32_DMA1->channels[4])
-/** Pointer to the DMA1 channel 6 registers block.*/
-#define STM32_DMA1_CH6 (&STM32_DMA1->channels[5])
-/** Pointer to the DMA1 channel 7 registers block.*/
-#define STM32_DMA1_CH7 (&STM32_DMA1->channels[6])
-
-#if STM32_HAS_DMA2 || defined(__DOXYGEN__)
-/** DMA2 registers block numeric address.*/
-#define STM32_DMA2_BASE (AHBPERIPH_BASE + 0x0400)
-/** Pointer to the DMA2 registers block.*/
-#define STM32_DMA2 ((stm32_dma_t *)STM32_DMA2_BASE)
-/** Pointer to the DMA2 channel 1 registers block.*/
-#define STM32_DMA2_CH1 (&STM32_DMA2->channels[0])
-/** Pointer to the DMA2 channel 2 registers block.*/
-#define STM32_DMA2_CH2 (&STM32_DMA2->channels[1])
-/** Pointer to the DMA2 channel 3 registers block.*/
-#define STM32_DMA2_CH3 (&STM32_DMA2->channels[2])
-/** Pointer to the DMA2 channel 4 registers block.*/
-#define STM32_DMA2_CH4 (&STM32_DMA2->channels[3])
-/** Pointer to the DMA2 channel 5 registers block.*/
-#define STM32_DMA2_CH5 (&STM32_DMA2->channels[4])
-#endif
-
-#define STM32_DMA_CHANNEL_1 0 /**< @brief DMA channel 1. */
-#define STM32_DMA_CHANNEL_2 1 /**< @brief DMA channel 2. */
-#define STM32_DMA_CHANNEL_3 2 /**< @brief DMA channel 3. */
-#define STM32_DMA_CHANNEL_4 3 /**< @brief DMA channel 4. */
-#define STM32_DMA_CHANNEL_5 4 /**< @brief DMA channel 5. */
-#define STM32_DMA_CHANNEL_6 5 /**< @brief DMA channel 6. */
-#define STM32_DMA_CHANNEL_7 6 /**< @brief DMA channel 7. */
-
-/**
- * @brief Associates a peripheral data register to a DMA channel.
- * @note This function can be invoked in both ISR or thread context.
- *
- * @param[in] dmachp dmachp to a stm32_dma_channel_t structure
- * @param[in] cpar value to be written in the CPAR register
- *
- * @special
- */
-#define dmaChannelSetPeripheral(dmachp, cpar) { \
- (dmachp)->CPAR = (uint32_t)(cpar); \
-}
-
-/**
- * @brief DMA channel setup by channel pointer.
- * @note This macro does not change the CPAR register because that register
- * value does not change frequently, it usually points to a peripheral
- * data register.
- * @note This function can be invoked in both ISR or thread context.
- *
- * @param[in] dmachp dmachp to a stm32_dma_channel_t structure
- * @param[in] cndtr value to be written in the CNDTR register
- * @param[in] cmar value to be written in the CMAR register
- * @param[in] ccr value to be written in the CCR register
- *
- * @special
- */
-#define dmaChannelSetup(dmachp, cndtr, cmar, ccr) { \
- (dmachp)->CNDTR = (uint32_t)(cndtr); \
- (dmachp)->CMAR = (uint32_t)(cmar); \
- (dmachp)->CCR = (uint32_t)(ccr); \
-}
-
-/**
- * @brief DMA channel enable by channel pointer.
- * @note This function can be invoked in both ISR or thread context.
- *
- * @param[in] dmachp dmachp to a stm32_dma_channel_t structure
- *
- * @special
- */
-#define dmaChannelEnable(dmachp) { \
- (dmachp)->CCR |= DMA_CCR1_EN; \
-}
-
-
-/**
- * @brief DMA channel disable by channel pointer.
- * @note This function can be invoked in both ISR or thread context.
- *
- * @param[in] dmachp dmachp to a stm32_dma_channel_t structure
- *
- * @special
- */
-#define dmaChannelDisable(dmachp) { \
- (dmachp)->CCR = 0; \
-}
-
-/**
- * @brief DMA channel setup by channel ID.
- * @note This macro does not change the CPAR register because that register
- * value does not change frequently, it usually points to a peripheral
- * data register.
- * @note Channels are numbered from 0 to 6, use the appropriate macro
- * as parameter.
- * @note This function can be invoked in both ISR or thread context.
- *
- * @param[in] dmap pointer to a stm32_dma_t structure
- * @param[in] ch channel number
- * @param[in] cndtr value to be written in the CNDTR register
- * @param[in] cmar value to be written in the CMAR register
- * @param[in] ccr value to be written in the CCR register
- *
- * @special
- */
-#define dmaSetupChannel(dmap, ch, cndtr, cmar, ccr) { \
- dmaChannelSetup(&(dmap)->channels[ch], (cndtr), (cmar), (ccr)); \
-}
-
-/**
- * @brief DMA channel enable by channel ID.
- * @note Channels are numbered from 0 to 6, use the appropriate macro
- * as parameter.
- * @note This function can be invoked in both ISR or thread context.
- *
- * @param[in] dmap pointer to a stm32_dma_t structure
- * @param[in] ch channel number
- *
- * @special
- */
-#define dmaEnableChannel(dmap, ch) { \
- dmaChannelEnable(&(dmap)->channels[ch]); \
-}
-
-/**
- * @brief DMA channel disable by channel ID.
- * @note Channels are numbered from 0 to 6, use the appropriate macro
- * as parameter.
- * @note This function can be invoked in both ISR or thread context.
- *
- * @param[in] dmap pointer to a stm32_dma_t structure
- * @param[in] ch channel number
- *
- * @special
- */
-#define dmaDisableChannel(dmap, ch) { \
- dmaChannelDisable(&(dmap)->channels[ch]); \
-}
-
-/**
- * @brief DMA channel interrupt sources clear.
- * @details Sets the appropriate CGIF bit into the IFCR register in order to
- * withdraw all the pending interrupt bits from the ISR register.
- * @note Channels are numbered from 0 to 6, use the appropriate macro
- * as parameter.
- * @note This function can be invoked in both ISR or thread context.
- *
- * @param[in] dmap pointer to a stm32_dma_t structure
- * @param[in] ch channel number
- *
- * @special
- */
-#define dmaClearChannel(dmap, ch){ \
- (dmap)->IFCR = 1 << ((ch) * 4); \
-}
-
-/*===========================================================================*/
-/* External declarations. */
-/*===========================================================================*/
-
-#ifdef __cplusplus
-extern "C" {
-#endif
- void dmaInit(void);
- void dmaAllocate(uint32_t dma, uint32_t channel,
- stm32_dmaisr_t func, void *param);
- void dmaRelease(uint32_t dma, uint32_t channel);
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* _STM32_DMA_H_ */
-
-/** @} */
diff --git a/os/hal/platforms/STM8L/pal_lld.c b/os/hal/platforms/STM8L/pal_lld.c index 5480ad28c..40dcdf8d2 100644 --- a/os/hal/platforms/STM8L/pal_lld.c +++ b/os/hal/platforms/STM8L/pal_lld.c @@ -67,7 +67,7 @@ */
void _pal_lld_setgroupmode(ioportid_t port,
ioportmask_t mask,
- uint_fast8_t mode) {
+ iomode_t mode) {
switch (mode) {
case PAL_MODE_RESET:
diff --git a/os/hal/platforms/STM8L/pal_lld.h b/os/hal/platforms/STM8L/pal_lld.h index a8ae458f3..30fef0e82 100644 --- a/os/hal/platforms/STM8L/pal_lld.h +++ b/os/hal/platforms/STM8L/pal_lld.h @@ -244,7 +244,7 @@ extern "C" { #endif
void _pal_lld_setgroupmode(ioportid_t port,
ioportmask_t mask,
- uint_fast8_t mode);
+ iomode_t mode);
#ifdef __cplusplus
}
#endif
diff --git a/os/hal/platforms/STM8S/pal_lld.c b/os/hal/platforms/STM8S/pal_lld.c index 385347c97..cebf349aa 100644 --- a/os/hal/platforms/STM8S/pal_lld.c +++ b/os/hal/platforms/STM8S/pal_lld.c @@ -67,7 +67,7 @@ */
void _pal_lld_setgroupmode(ioportid_t port,
ioportmask_t mask,
- uint_fast8_t mode) {
+ iomode_t mode) {
switch (mode) {
case PAL_MODE_RESET:
diff --git a/os/hal/platforms/STM8S/pal_lld.h b/os/hal/platforms/STM8S/pal_lld.h index 0742c21ef..954a11361 100644 --- a/os/hal/platforms/STM8S/pal_lld.h +++ b/os/hal/platforms/STM8S/pal_lld.h @@ -229,7 +229,7 @@ extern "C" { #endif
void _pal_lld_setgroupmode(ioportid_t port,
ioportmask_t mask,
- uint_fast8_t mode);
+ iomode_t mode);
#ifdef __cplusplus
}
#endif
diff --git a/os/hal/platforms/Win32/pal_lld.c b/os/hal/platforms/Win32/pal_lld.c index b2a83d77f..755d77a09 100644 --- a/os/hal/platforms/Win32/pal_lld.c +++ b/os/hal/platforms/Win32/pal_lld.c @@ -79,7 +79,7 @@ sim_vio_port_t vio_port_2; */
void _pal_lld_setgroupmode(ioportid_t port,
ioportmask_t mask,
- uint_fast8_t mode) {
+ iomode_t mode) {
switch (mode) {
case PAL_MODE_RESET:
diff --git a/os/hal/platforms/Win32/pal_lld.h b/os/hal/platforms/Win32/pal_lld.h index 6ddfcdefd..ad70eeebc 100644 --- a/os/hal/platforms/Win32/pal_lld.h +++ b/os/hal/platforms/Win32/pal_lld.h @@ -196,7 +196,7 @@ extern "C" { #endif
void _pal_lld_setgroupmode(ioportid_t port,
ioportmask_t mask,
- uint_fast8_t mode);
+ iomode_t mode);
#ifdef __cplusplus
}
#endif
diff --git a/os/kernel/include/chdebug.h b/os/kernel/include/chdebug.h index 2fb3b2385..b2edf176e 100644 --- a/os/kernel/include/chdebug.h +++ b/os/kernel/include/chdebug.h @@ -90,13 +90,15 @@ typedef struct { *
* @api
*/
+#if !defined(chDbgCheck)
#define chDbgCheck(c, func) { \
if (!(c)) \
- chDbgPanic(__QUOTE_THIS(func)"(), line "__QUOTE_THIS(__LINE__)); \
+ chDbgPanic(__QUOTE_THIS(func)"()"); \
}
+#endif /* !defined(chDbgCheck) */
#else /* !CH_DBG_ENABLE_CHECKS */
#define chDbgCheck(c, func) { \
- (void)(c), (void)__QUOTE_THIS(func)"(), line "__QUOTE_THIS(__LINE__); \
+ (void)(c), (void)__QUOTE_THIS(func)"()"; \
}
#endif /* !CH_DBG_ENABLE_CHECKS */
@@ -118,10 +120,12 @@ typedef struct { *
* @api
*/
+#if !defined(chDbgAssert)
#define chDbgAssert(c, m, r) { \
if (!(c)) \
chDbgPanic(m); \
}
+#endif /* !defined(chDbgAssert) */
#else /* !CH_DBG_ENABLE_ASSERTS */
#define chDbgAssert(c, m, r) {(void)(c);}
#endif /* !CH_DBG_ENABLE_ASSERTS */
diff --git a/os/kernel/include/chschd.h b/os/kernel/include/chschd.h index e154da863..cd545a05e 100644 --- a/os/kernel/include/chschd.h +++ b/os/kernel/include/chschd.h @@ -76,12 +76,12 @@ typedef struct { initialized to zero. */
struct context r_ctx; /**< @brief Not used, present because
offsets. */
-#if CH_USE_REGISTRY
+#if CH_USE_REGISTRY || defined(__DOXYGEN__)
Thread *r_newer; /**< @brief Newer registry element. */
Thread *r_older; /**< @brief Older registry element. */
#endif
/* End of the fields shared with the Thread structure.*/
-#if CH_TIME_QUANTUM > 0
+#if (CH_TIME_QUANTUM > 0) || defined(__DOXYGEN__)
cnt_t r_preempt; /**< @brief Round robin counter. */
#endif
Thread *r_current; /**< @brief The currently running
diff --git a/os/kernel/include/chthreads.h b/os/kernel/include/chthreads.h index e0f1b3e95..b02960bd4 100644 --- a/os/kernel/include/chthreads.h +++ b/os/kernel/include/chthreads.h @@ -44,17 +44,23 @@ struct Thread { /* End of the fields shared with the ThreadsQueue structure. */
tprio_t p_prio; /**< @brief Thread priority. */
struct context p_ctx; /**< @brief Processor context. */
-#if CH_USE_REGISTRY
+#if CH_USE_REGISTRY || defined(__DOXYGEN__)
Thread *p_newer; /**< @brief Newer registry element. */
Thread *p_older; /**< @brief Older registry element. */
#endif
/* End of the fields shared with the ReadyList structure. */
-#if CH_USE_REGISTRY
+#if CH_USE_REGISTRY || defined(__DOXYGEN__)
/**
* @brief Thread name or @p NULL.
*/
const char *p_name;
#endif
+#if CH_DBG_ENABLE_STACK_CHECK || defined(__DOXYGEN__)
+ /**
+ * @brief Thread stack boundary.
+ */
+ stkalign_t *p_stklimit;
+#endif
/**
* @brief Current thread state.
*/
@@ -63,19 +69,19 @@ struct Thread { * @brief Various thread flags.
*/
tmode_t p_flags;
-#if CH_USE_DYNAMIC
+#if CH_USE_DYNAMIC || defined(__DOXYGEN__)
/**
* @brief References to this thread.
*/
trefs_t p_refs;
#endif
-#if CH_USE_NESTED_LOCKS
+#if CH_USE_NESTED_LOCKS || defined(__DOXYGEN__)
/**
* @brief Number of nested locks.
*/
cnt_t p_locks;
#endif
-#if CH_DBG_THREADS_PROFILING
+#if CH_DBG_THREADS_PROFILING || defined(__DOXYGEN__)
/**
* @brief Thread consumed time in ticks.
* @note This field can overflow.
@@ -109,22 +115,22 @@ struct Thread { * states.
*/
void *wtobjp;
-#if CH_USE_EVENTS
+#if CH_USE_EVENTS || defined(__DOXYGEN__)
/**
* @brief Enabled events mask.
- * @note This field is only valied while the thread is in the
+ * @note This field is only valid while the thread is in the
* @p THD_STATE_WTOREVT or @p THD_STATE_WTANDEVT states.
*/
eventmask_t ewmask;
#endif
} p_u;
-#if CH_USE_WAITEXIT
+#if CH_USE_WAITEXIT || defined(__DOXYGEN__)
/**
* @brief Termination waiting list.
*/
ThreadsList p_waiting;
#endif
-#if CH_USE_MESSAGES
+#if CH_USE_MESSAGES || defined(__DOXYGEN__)
/**
* @brief Messages queue.
*/
@@ -134,13 +140,13 @@ struct Thread { */
msg_t p_msg;
#endif
-#if CH_USE_EVENTS
+#if CH_USE_EVENTS || defined(__DOXYGEN__)
/**
* @brief Pending events mask.
*/
eventmask_t p_epending;
#endif
-#if CH_USE_MUTEXES
+#if CH_USE_MUTEXES || defined(__DOXYGEN__)
/**
* @brief List of the mutexes owned by this thread.
* @note The list is terminated by a @p NULL in this field.
@@ -151,7 +157,7 @@ struct Thread { */
tprio_t p_realprio;
#endif
-#if CH_USE_DYNAMIC && CH_USE_MEMPOOLS
+#if (CH_USE_DYNAMIC && CH_USE_MEMPOOLS) || defined(__DOXYGEN__)
/**
* @brief Memory Pool where the thread workspace is returned.
*/
diff --git a/os/kernel/src/chsys.c b/os/kernel/src/chsys.c index 8d9ce4905..4c8cd708d 100644 --- a/os/kernel/src/chsys.c +++ b/os/kernel/src/chsys.c @@ -77,6 +77,9 @@ void _idle_thread(void *p) { */
void chSysInit(void) {
static Thread mainthread;
+#if CH_DBG_ENABLE_STACK_CHECK
+ extern stkalign_t __main_thread_stack_base__;
+#endif
port_init();
_scheduler_init();
@@ -94,6 +97,9 @@ void chSysInit(void) { /* Now this instructions flow becomes the main thread.*/
setcurrp(_thread_init(&mainthread, NORMALPRIO));
currp->p_state = THD_STATE_CURRENT;
+#if CH_DBG_ENABLE_STACK_CHECK
+ currp->p_stklimit = &__main_thread_stack_base__;
+#endif
chSysEnable();
chRegSetThreadName("main");
diff --git a/os/kernel/src/chthreads.c b/os/kernel/src/chthreads.c index b68263a7b..182de7673 100644 --- a/os/kernel/src/chthreads.c +++ b/os/kernel/src/chthreads.c @@ -99,6 +99,9 @@ Thread *_thread_init(Thread *tp, tprio_t prio) { #if CH_USE_MESSAGES
queue_init(&tp->p_msgqueue);
#endif
+#if CH_DBG_ENABLE_STACK_CHECK
+ tp->p_stklimit = (stkalign_t *)(tp + 1);
+#endif
#if defined(THREAD_EXT_INIT_HOOK)
THREAD_EXT_INIT_HOOK(tp);
#endif
diff --git a/os/ports/GCC/ARM/AT91SAM7/ld/AT91SAM7S256.ld b/os/ports/GCC/ARM/AT91SAM7/ld/AT91SAM7S256.ld new file mode 100644 index 000000000..8ec869a02 --- /dev/null +++ b/os/ports/GCC/ARM/AT91SAM7/ld/AT91SAM7S256.ld @@ -0,0 +1,105 @@ +/*
+ ChibiOS/RT - Copyright (C) 2006,2007,2008,2009,2010,
+ 2011 Giovanni Di Sirio.
+
+ This file is part of ChibiOS/RT.
+
+ ChibiOS/RT is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 3 of the License, or
+ (at your option) any later version.
+
+ ChibiOS/RT is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+/*
+ * AT91SAM7S256 memory setup.
+ */
+__und_stack_size__ = 0x0004;
+__abt_stack_size__ = 0x0004;
+__fiq_stack_size__ = 0x0010;
+__irq_stack_size__ = 0x0080;
+__svc_stack_size__ = 0x0004;
+__sys_stack_size__ = 0x0400;
+__stacks_total_size__ = __und_stack_size__ + __abt_stack_size__ + __fiq_stack_size__ + __irq_stack_size__ + __svc_stack_size__ + __sys_stack_size__;
+
+MEMORY
+{
+ flash : org = 0x100000, len = 256k
+ ram : org = 0x200020, len = 64k - 0x20
+}
+
+__ram_start__ = ORIGIN(ram);
+__ram_size__ = LENGTH(ram);
+__ram_end__ = __ram_start__ + __ram_size__;
+
+SECTIONS
+{
+ . = 0;
+
+ .text : ALIGN(16) SUBALIGN(16)
+ {
+ _text = .;
+ KEEP(*(vectors))
+ *(.text)
+ *(.text.*)
+ *(.rodata)
+ *(.rodata.*)
+ *(.glue_7t)
+ *(.glue_7)
+ *(.gcc*)
+ *(.ctors)
+ *(.dtors)
+ } > flash
+
+ .ARM.extab : {*(.ARM.extab* .gnu.linkonce.armextab.*)}
+
+ __exidx_start = .;
+ .ARM.exidx : {*(.ARM.exidx* .gnu.linkonce.armexidx.*)} > flash
+ __exidx_end = .;
+
+ .eh_frame_hdr : {*(.eh_frame_hdr)}
+
+ .eh_frame : ONLY_IF_RO {*(.eh_frame)}
+
+ . = ALIGN(4);
+ _etext = .;
+ _textdata = _etext;
+
+ .data :
+ {
+ _data = .;
+ *(.data)
+ . = ALIGN(4);
+ *(.data.*)
+ . = ALIGN(4);
+ *(.ramtext)
+ . = ALIGN(4);
+ _edata = .;
+ } > ram AT > flash
+
+ .bss :
+ {
+ _bss_start = .;
+ *(.bss)
+ . = ALIGN(4);
+ *(.bss.*)
+ . = ALIGN(4);
+ *(COMMON)
+ . = ALIGN(4);
+ _bss_end = .;
+ } > ram
+}
+
+PROVIDE(end = .);
+_end = .;
+
+__heap_base__ = _end;
+__heap_end__ = __ram_end__ - __stacks_total_size__;
+__main_thread_stack_base__ = __ram_end__ - __stacks_total_size__;
diff --git a/os/ports/GCC/ARM/AT91SAM7/ld/AT91SAM7X256.ld b/os/ports/GCC/ARM/AT91SAM7/ld/AT91SAM7X256.ld new file mode 100644 index 000000000..ea9527a34 --- /dev/null +++ b/os/ports/GCC/ARM/AT91SAM7/ld/AT91SAM7X256.ld @@ -0,0 +1,105 @@ +/*
+ ChibiOS/RT - Copyright (C) 2006,2007,2008,2009,2010,
+ 2011 Giovanni Di Sirio.
+
+ This file is part of ChibiOS/RT.
+
+ ChibiOS/RT is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 3 of the License, or
+ (at your option) any later version.
+
+ ChibiOS/RT is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+/*
+ * AT91SAM7X256 memory setup.
+ */
+__und_stack_size__ = 0x0004;
+__abt_stack_size__ = 0x0004;
+__fiq_stack_size__ = 0x0010;
+__irq_stack_size__ = 0x0080;
+__svc_stack_size__ = 0x0004;
+__sys_stack_size__ = 0x0400;
+__stacks_total_size__ = __und_stack_size__ + __abt_stack_size__ + __fiq_stack_size__ + __irq_stack_size__ + __svc_stack_size__ + __sys_stack_size__;
+
+MEMORY
+{
+ flash : org = 0x100000, len = 256k
+ ram : org = 0x200020, len = 64k - 0x20
+}
+
+__ram_start__ = ORIGIN(ram);
+__ram_size__ = LENGTH(ram);
+__ram_end__ = __ram_start__ + __ram_size__;
+
+SECTIONS
+{
+ . = 0;
+
+ .text : ALIGN(16) SUBALIGN(16)
+ {
+ _text = .;
+ KEEP(*(vectors))
+ *(.text)
+ *(.text.*)
+ *(.rodata)
+ *(.rodata.*)
+ *(.glue_7t)
+ *(.glue_7)
+ *(.gcc*)
+ *(.ctors)
+ *(.dtors)
+ } > flash
+
+ .ARM.extab : {*(.ARM.extab* .gnu.linkonce.armextab.*)}
+
+ __exidx_start = .;
+ .ARM.exidx : {*(.ARM.exidx* .gnu.linkonce.armexidx.*)} > flash
+ __exidx_end = .;
+
+ .eh_frame_hdr : {*(.eh_frame_hdr)}
+
+ .eh_frame : ONLY_IF_RO {*(.eh_frame)}
+
+ . = ALIGN(4);
+ _etext = .;
+ _textdata = _etext;
+
+ .data :
+ {
+ _data = .;
+ *(.data)
+ . = ALIGN(4);
+ *(.data.*)
+ . = ALIGN(4);
+ *(.ramtext)
+ . = ALIGN(4);
+ _edata = .;
+ } > ram AT > flash
+
+ .bss :
+ {
+ _bss_start = .;
+ *(.bss)
+ . = ALIGN(4);
+ *(.bss.*)
+ . = ALIGN(4);
+ *(COMMON)
+ . = ALIGN(4);
+ _bss_end = .;
+ } > ram
+}
+
+PROVIDE(end = .);
+_end = .;
+
+__heap_base__ = _end;
+__heap_end__ = __ram_end__ - __stacks_total_size__;
+__main_thread_stack_base__ = __ram_end__ - __stacks_total_size__;
diff --git a/os/ports/GCC/ARM/AT91SAM7/port.mk b/os/ports/GCC/ARM/AT91SAM7/port.mk new file mode 100644 index 000000000..e28d9b78e --- /dev/null +++ b/os/ports/GCC/ARM/AT91SAM7/port.mk @@ -0,0 +1,13 @@ +# List of the ChibiOS/RT ARM7 AT91SAM7 port files.
+PORTSRC = ${CHIBIOS}/os/ports/GCC/ARM/chcore.c
+
+PORTASM = ${CHIBIOS}/os/ports/GCC/ARM/crt0.s \
+ ${CHIBIOS}/os/ports/GCC/ARM/chcoreasm.s \
+ ${CHIBIOS}/os/ports/GCC/ARM/AT91SAM7/vectors.s
+
+
+PORTINC = ${CHIBIOS}/os/ports/GCC/ARM \
+ ${CHIBIOS}/os/ports/GCC/ARM/AT91SAM7
+
+PORTLD = ${CHIBIOS}/os/ports/GCC/ARM/AT91SAM7/ld
+
diff --git a/os/ports/GCC/ARM/LPC214x/ld/LPC2148.ld b/os/ports/GCC/ARM/LPC214x/ld/LPC2148.ld new file mode 100644 index 000000000..c94daa808 --- /dev/null +++ b/os/ports/GCC/ARM/LPC214x/ld/LPC2148.ld @@ -0,0 +1,108 @@ +/*
+ ChibiOS/RT - Copyright (C) 2006,2007,2008,2009,2010,
+ 2011 Giovanni Di Sirio.
+
+ This file is part of ChibiOS/RT.
+
+ ChibiOS/RT is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 3 of the License, or
+ (at your option) any later version.
+
+ ChibiOS/RT is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+/*
+ * LPC2148 memory setup.
+ */
+__und_stack_size__ = 0x0004;
+__abt_stack_size__ = 0x0004;
+__fiq_stack_size__ = 0x0010;
+__irq_stack_size__ = 0x0080;
+__svc_stack_size__ = 0x0004;
+__sys_stack_size__ = 0x0400;
+__stacks_total_size__ = __und_stack_size__ + __abt_stack_size__ + __fiq_stack_size__ + __irq_stack_size__ + __svc_stack_size__ + __sys_stack_size__;
+
+MEMORY
+{
+ flash : org = 0x00000000, len = 512k - 12k
+ ram : org = 0x40000200, len = 32k - 0x200 - 288
+}
+
+__ram_start__ = ORIGIN(ram);
+__ram_size__ = LENGTH(ram);
+__ram_end__ = __ram_start__ + __ram_size__;
+__dma_start__ = 0x7FD00000;
+__dma_size__ = 8k;
+__dma_end__ = 0x7FD00000 + __dma_size__;
+
+SECTIONS
+{
+ . = 0;
+
+ .text : ALIGN(16) SUBALIGN(16)
+ {
+ _text = .;
+ KEEP(*(vectors))
+ *(.text)
+ *(.text.*)
+ *(.rodata)
+ *(.rodata.*)
+ *(.glue_7t)
+ *(.glue_7)
+ *(.gcc*)
+ *(.ctors)
+ *(.dtors)
+ } > flash
+
+ .ARM.extab : {*(.ARM.extab* .gnu.linkonce.armextab.*)}
+
+ __exidx_start = .;
+ .ARM.exidx : {*(.ARM.exidx* .gnu.linkonce.armexidx.*)} > flash
+ __exidx_end = .;
+
+ .eh_frame_hdr : {*(.eh_frame_hdr)}
+
+ .eh_frame : ONLY_IF_RO {*(.eh_frame)}
+
+ . = ALIGN(4);
+ _etext = .;
+ _textdata = _etext;
+
+ .data :
+ {
+ _data = .;
+ *(.data)
+ . = ALIGN(4);
+ *(.data.*)
+ . = ALIGN(4);
+ *(.ramtext)
+ . = ALIGN(4);
+ _edata = .;
+ } > ram AT > flash
+
+ .bss :
+ {
+ _bss_start = .;
+ *(.bss)
+ . = ALIGN(4);
+ *(.bss.*)
+ . = ALIGN(4);
+ *(COMMON)
+ . = ALIGN(4);
+ _bss_end = .;
+ } > ram
+}
+
+PROVIDE(end = .);
+_end = .;
+
+__heap_base__ = _end;
+__heap_end__ = __ram_end__ - __stacks_total_size__;
+__main_thread_stack_base__ = __ram_end__ - __stacks_total_size__;
diff --git a/os/ports/GCC/ARM/LPC214x/port.mk b/os/ports/GCC/ARM/LPC214x/port.mk new file mode 100644 index 000000000..1fcd858e5 --- /dev/null +++ b/os/ports/GCC/ARM/LPC214x/port.mk @@ -0,0 +1,13 @@ +# List of the ChibiOS/RT ARM7 LPC214x port files.
+PORTSRC = ${CHIBIOS}/os/ports/GCC/ARM/chcore.c
+
+PORTASM = ${CHIBIOS}/os/ports/GCC/ARM/crt0.s \
+ ${CHIBIOS}/os/ports/GCC/ARM/chcoreasm.s \
+ ${CHIBIOS}/os/ports/GCC/ARM/LPC214x/vectors.s
+
+
+PORTINC = ${CHIBIOS}/os/ports/GCC/ARM \
+ ${CHIBIOS}/os/ports/GCC/ARM/LPC214x
+
+PORTLD = ${CHIBIOS}/os/ports/GCC/ARM/LPC214x/ld
+
diff --git a/os/ports/GCC/ARM/chcore.h b/os/ports/GCC/ARM/chcore.h index 20727ce23..c2d2892cd 100644 --- a/os/ports/GCC/ARM/chcore.h +++ b/os/ports/GCC/ARM/chcore.h @@ -438,14 +438,10 @@ struct context { #ifdef THUMB
#if CH_DBG_ENABLE_STACK_CHECK
#define port_switch(ntp, otp) { \
- register Thread *_ntp asm ("r0") = (ntp); \
- register Thread *_otp asm ("r1") = (otp); \
- register char *sp asm ("sp"); \
- if (sp - sizeof(struct intctx) - sizeof(Thread) < (char *)_otp) \
- asm volatile ("mov r0, #0 \n\t" \
- "ldr r1, =chDbgPanic \n\t" \
- "bx r1"); \
- _port_switch_thumb(_ntp, _otp); \
+ register struct intctx *r13 asm ("r13"); \
+ if ((stkalign_t *)(r13 - 1) < otp->p_stklimit) \
+ chDbgPanic("stack overflow"); \
+ _port_switch_thumb(ntp, otp); \
}
#else /* !CH_DBG_ENABLE_STACK_CHECK */
#define port_switch(ntp, otp) _port_switch_thumb(ntp, otp)
@@ -453,13 +449,10 @@ struct context { #else /* !THUMB */
#if CH_DBG_ENABLE_STACK_CHECK
#define port_switch(ntp, otp) { \
- register Thread *_ntp asm ("r0") = (ntp); \
- register Thread *_otp asm ("r1") = (otp); \
- register char *sp asm ("sp"); \
- if (sp - sizeof(struct intctx) - sizeof(Thread) < (char *)_otp) \
- asm volatile ("mov r0, #0 \n\t" \
- "b chDbgPanic"); \
- _port_switch_arm(_ntp, _otp); \
+ register struct intctx *r13 asm ("r13"); \
+ if ((stkalign_t *)(r13 - 1) < otp->p_stklimit) \
+ chDbgPanic("stack overflow"); \
+ _port_switch_arm(ntp, otp); \
}
#else /* !CH_DBG_ENABLE_STACK_CHECK */
#define port_switch(ntp, otp) _port_switch_arm(ntp, otp)
diff --git a/os/ports/GCC/ARM/port.mk b/os/ports/GCC/ARM/port.mk deleted file mode 100644 index fdad5f5e6..000000000 --- a/os/ports/GCC/ARM/port.mk +++ /dev/null @@ -1,7 +0,0 @@ -# List of the ChibiOS/RT ARM7/9 port files.
-PORTSRC = ${CHIBIOS}/os/ports/GCC/ARM/chcore.c
-
-PORTASM = ${CHIBIOS}/os/ports/GCC/ARM/crt0.s \
- ${CHIBIOS}/os/ports/GCC/ARM/chcoreasm.s
-
-PORTINC = ${CHIBIOS}/os/ports/GCC/ARM
diff --git a/os/ports/GCC/ARMCMx/LPC11xx/ld/LPC1114.ld b/os/ports/GCC/ARMCMx/LPC11xx/ld/LPC1114.ld new file mode 100644 index 000000000..c5634d749 --- /dev/null +++ b/os/ports/GCC/ARMCMx/LPC11xx/ld/LPC1114.ld @@ -0,0 +1,144 @@ +/*
+ ChibiOS/RT - Copyright (C) 2006,2007,2008,2009,2010,
+ 2011 Giovanni Di Sirio.
+
+ This file is part of ChibiOS/RT.
+
+ ChibiOS/RT is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 3 of the License, or
+ (at your option) any later version.
+
+ ChibiOS/RT is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+/*
+ * LPC1114 memory setup.
+ */
+__main_stack_size__ = 0x0100;
+__process_stack_size__ = 0x0100;
+
+MEMORY
+{
+ flash : org = 0x00000000, len = 32k
+ ram : org = 0x10000000, len = 8k
+}
+
+__ram_start__ = ORIGIN(ram);
+__ram_size__ = LENGTH(ram);
+__ram_end__ = __ram_start__ + __ram_size__;
+
+SECTIONS
+{
+ . = 0;
+ _text = .;
+
+ startup : ALIGN(16) SUBALIGN(16)
+ {
+ KEEP(*(vectors))
+ } > flash
+
+ constructors : ALIGN(4) SUBALIGN(4)
+ {
+ PROVIDE(__init_array_start = .);
+ KEEP(*(SORT(.init_array.*)))
+ KEEP(*(.init_array))
+ PROVIDE(__init_array_end = .);
+ } > flash
+
+ destructors : ALIGN(4) SUBALIGN(4)
+ {
+ PROVIDE(__fini_array_start = .);
+ KEEP(*(.fini_array))
+ KEEP(*(SORT(.fini_array.*)))
+ PROVIDE(__fini_array_end = .);
+ } > flash
+
+ .text : ALIGN(16) SUBALIGN(16)
+ {
+ *(.text.startup.*)
+ *(.text)
+ *(.text.*)
+ *(.rodata)
+ *(.rodata.*)
+ *(.glue_7t)
+ *(.glue_7)
+ *(.gcc*)
+ } > flash
+
+ .ARM.extab :
+ {
+ *(.ARM.extab* .gnu.linkonce.armextab.*)
+ } > flash
+
+ .ARM.exidx : {
+ PROVIDE(__exidx_start = .);
+ *(.ARM.exidx* .gnu.linkonce.armexidx.*)
+ PROVIDE(__exidx_end = .);
+ } > flash
+
+ .eh_frame_hdr :
+ {
+ *(.eh_frame_hdr)
+ } > flash
+
+ .eh_frame : ONLY_IF_RO
+ {
+ *(.eh_frame)
+ } > flash
+
+ . = ALIGN(4);
+ _etext = .;
+ _textdata = _etext;
+
+ .stacks :
+ {
+ . = ALIGN(8);
+ __main_stack_base__ = .;
+ . += __main_stack_size__;
+ . = ALIGN(8);
+ __main_stack_end__ = .;
+ __process_stack_base__ = .;
+ __main_thread_stack_base__ = .;
+ . += __process_stack_size__;
+ . = ALIGN(8);
+ __process_stack_end__ = .;
+ __main_thread_stack_end__ = .;
+ } > ram
+
+ .data :
+ {
+ PROVIDE(_data = .);
+ *(.data)
+ . = ALIGN(4);
+ *(.data.*)
+ . = ALIGN(4);
+ *(.ramtext)
+ . = ALIGN(4);
+ PROVIDE(_edata = .);
+ } > ram AT > flash
+
+ .bss :
+ {
+ PROVIDE(_bss_start = .);
+ *(.bss)
+ . = ALIGN(4);
+ *(.bss.*)
+ . = ALIGN(4);
+ *(COMMON)
+ . = ALIGN(4);
+ PROVIDE(_bss_end = .);
+ } > ram
+}
+
+PROVIDE(end = .);
+_end = .;
+
+__heap_base__ = _end;
+__heap_end__ = __ram_end__;
diff --git a/os/ports/GCC/ARMCMx/LPC11xx/port.mk b/os/ports/GCC/ARMCMx/LPC11xx/port.mk index a38729958..1b9c8cf9f 100644 --- a/os/ports/GCC/ARMCMx/LPC11xx/port.mk +++ b/os/ports/GCC/ARMCMx/LPC11xx/port.mk @@ -7,5 +7,8 @@ PORTSRC = $(CHIBIOS)/os/ports/GCC/ARMCMx/crt0.c \ PORTASM =
-PORTINC = ${CHIBIOS}/os/ports/GCC/ARMCMx \
+PORTINC = ${CHIBIOS}/os/ports/common/ARMCMx/CMSIS/include \
+ ${CHIBIOS}/os/ports/GCC/ARMCMx \
${CHIBIOS}/os/ports/GCC/ARMCMx/LPC11xx
+
+PORTLD = ${CHIBIOS}/os/ports/GCC/ARMCMx/LPC11xx/ld
diff --git a/os/ports/GCC/ARMCMx/LPC11xx/vectors.c b/os/ports/GCC/ARMCMx/LPC11xx/vectors.c index 63b343ea2..527d82836 100644 --- a/os/ports/GCC/ARMCMx/LPC11xx/vectors.c +++ b/os/ports/GCC/ARMCMx/LPC11xx/vectors.c @@ -31,7 +31,7 @@ #include "ch.h"
#if !defined(__DOXYGEN__)
-extern void __ram_end__(void);
+extern void __main_stack_end__(void);
extern void ResetHandler(void);
extern void NMIVector(void);
extern void HardFaultVector(void);
@@ -88,7 +88,7 @@ extern void VectorBC(void); __attribute__ ((section("vectors")))
#endif
void (*_vectors[])(void) = {
- __ram_end__, ResetHandler, NMIVector, HardFaultVector,
+ __main_stack_end__, ResetHandler, NMIVector, HardFaultVector,
MemManageVector, BusFaultVector, UsageFaultVector, Vector1C,
Vector20, Vector24, Vector28, SVCallVector,
DebugMonitorVector, Vector34, PendSVVector, SysTickVector,
diff --git a/os/ports/GCC/ARMCMx/LPC13xx/ld/LPC1343.ld b/os/ports/GCC/ARMCMx/LPC13xx/ld/LPC1343.ld new file mode 100644 index 000000000..71f3c2c4a --- /dev/null +++ b/os/ports/GCC/ARMCMx/LPC13xx/ld/LPC1343.ld @@ -0,0 +1,144 @@ +/*
+ ChibiOS/RT - Copyright (C) 2006,2007,2008,2009,2010,
+ 2011 Giovanni Di Sirio.
+
+ This file is part of ChibiOS/RT.
+
+ ChibiOS/RT is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 3 of the License, or
+ (at your option) any later version.
+
+ ChibiOS/RT is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+/*
+ * LPC1343 memory setup.
+ */
+__main_stack_size__ = 0x0100;
+__process_stack_size__ = 0x0100;
+
+MEMORY
+{
+ flash : org = 0x00000000, len = 32k
+ ram : org = 0x10000000, len = 8k
+}
+
+__ram_start__ = ORIGIN(ram);
+__ram_size__ = LENGTH(ram);
+__ram_end__ = __ram_start__ + __ram_size__;
+
+SECTIONS
+{
+ . = 0;
+ _text = .;
+
+ startup : ALIGN(16) SUBALIGN(16)
+ {
+ KEEP(*(vectors))
+ } > flash
+
+ constructors : ALIGN(4) SUBALIGN(4)
+ {
+ PROVIDE(__init_array_start = .);
+ KEEP(*(SORT(.init_array.*)))
+ KEEP(*(.init_array))
+ PROVIDE(__init_array_end = .);
+ } > flash
+
+ destructors : ALIGN(4) SUBALIGN(4)
+ {
+ PROVIDE(__fini_array_start = .);
+ KEEP(*(.fini_array))
+ KEEP(*(SORT(.fini_array.*)))
+ PROVIDE(__fini_array_end = .);
+ } > flash
+
+ .text : ALIGN(16) SUBALIGN(16)
+ {
+ *(.text.startup.*)
+ *(.text)
+ *(.text.*)
+ *(.rodata)
+ *(.rodata.*)
+ *(.glue_7t)
+ *(.glue_7)
+ *(.gcc*)
+ } > flash
+
+ .ARM.extab :
+ {
+ *(.ARM.extab* .gnu.linkonce.armextab.*)
+ } > flash
+
+ .ARM.exidx : {
+ PROVIDE(__exidx_start = .);
+ *(.ARM.exidx* .gnu.linkonce.armexidx.*)
+ PROVIDE(__exidx_end = .);
+ } > flash
+
+ .eh_frame_hdr :
+ {
+ *(.eh_frame_hdr)
+ } > flash
+
+ .eh_frame : ONLY_IF_RO
+ {
+ *(.eh_frame)
+ } > flash
+
+ . = ALIGN(4);
+ _etext = .;
+ _textdata = _etext;
+
+ .stacks :
+ {
+ . = ALIGN(8);
+ __main_stack_base__ = .;
+ . += __main_stack_size__;
+ . = ALIGN(8);
+ __main_stack_end__ = .;
+ __process_stack_base__ = .;
+ __main_thread_stack_base__ = .;
+ . += __process_stack_size__;
+ . = ALIGN(8);
+ __process_stack_end__ = .;
+ __main_thread_stack_end__ = .;
+ } > ram
+
+ .data :
+ {
+ PROVIDE(_data = .);
+ *(.data)
+ . = ALIGN(4);
+ *(.data.*)
+ . = ALIGN(4);
+ *(.ramtext)
+ . = ALIGN(4);
+ PROVIDE(_edata = .);
+ } > ram AT > flash
+
+ .bss :
+ {
+ PROVIDE(_bss_start = .);
+ *(.bss)
+ . = ALIGN(4);
+ *(.bss.*)
+ . = ALIGN(4);
+ *(COMMON)
+ . = ALIGN(4);
+ PROVIDE(_bss_end = .);
+ } > ram
+}
+
+PROVIDE(end = .);
+_end = .;
+
+__heap_base__ = _end;
+__heap_end__ = __ram_end__;
diff --git a/os/ports/GCC/ARMCMx/LPC13xx/port.mk b/os/ports/GCC/ARMCMx/LPC13xx/port.mk index d87487e54..d7037a6ea 100644 --- a/os/ports/GCC/ARMCMx/LPC13xx/port.mk +++ b/os/ports/GCC/ARMCMx/LPC13xx/port.mk @@ -7,5 +7,8 @@ PORTSRC = $(CHIBIOS)/os/ports/GCC/ARMCMx/crt0.c \ PORTASM =
-PORTINC = ${CHIBIOS}/os/ports/GCC/ARMCMx \
+PORTINC = ${CHIBIOS}/os/ports/common/ARMCMx/CMSIS/include \
+ ${CHIBIOS}/os/ports/GCC/ARMCMx \
${CHIBIOS}/os/ports/GCC/ARMCMx/LPC13xx
+
+PORTLD = ${CHIBIOS}/os/ports/GCC/ARMCMx/LPC13xx/ld
diff --git a/os/ports/GCC/ARMCMx/LPC13xx/vectors.c b/os/ports/GCC/ARMCMx/LPC13xx/vectors.c index 1e27c4fc8..14bc798dd 100644 --- a/os/ports/GCC/ARMCMx/LPC13xx/vectors.c +++ b/os/ports/GCC/ARMCMx/LPC13xx/vectors.c @@ -31,7 +31,7 @@ #include "ch.h"
#if !defined(__DOXYGEN__)
-extern void __ram_end__(void);
+extern void __main_stack_end__(void);
extern void ResetHandler(void);
extern void NMIVector(void);
extern void HardFaultVector(void);
@@ -112,7 +112,7 @@ extern void Vector11C(void); __attribute__ ((section("vectors")))
#endif
void (*_vectors[])(void) = {
- __ram_end__, ResetHandler, NMIVector, HardFaultVector,
+ __main_stack_end__, ResetHandler, NMIVector, HardFaultVector,
MemManageVector, BusFaultVector, UsageFaultVector, Vector1C,
Vector20, Vector24, Vector28, SVCallVector,
DebugMonitorVector, Vector34, PendSVVector, SysTickVector,
diff --git a/os/ports/GCC/ARMCMx/STM32/port.mk b/os/ports/GCC/ARMCMx/STM32/port.mk deleted file mode 100644 index 104b22e42..000000000 --- a/os/ports/GCC/ARMCMx/STM32/port.mk +++ /dev/null @@ -1,11 +0,0 @@ -# List of the ChibiOS/RT Cortex-M3 STM32 port files.
-PORTSRC = $(CHIBIOS)/os/ports/GCC/ARMCMx/crt0.c \
- $(CHIBIOS)/os/ports/GCC/ARMCMx/STM32/vectors.c \
- ${CHIBIOS}/os/ports/GCC/ARMCMx/chcore.c \
- ${CHIBIOS}/os/ports/GCC/ARMCMx/chcore_v7m.c \
- ${CHIBIOS}/os/ports/GCC/ARMCMx/nvic.c
-
-PORTASM =
-
-PORTINC = ${CHIBIOS}/os/ports/GCC/ARMCMx \
- ${CHIBIOS}/os/ports/GCC/ARMCMx/STM32
diff --git a/os/ports/GCC/ARMCMx/STM32/cmparams.h b/os/ports/GCC/ARMCMx/STM32F1xx/cmparams.h index 5b630dbb8..02d07e73d 100644 --- a/os/ports/GCC/ARMCMx/STM32/cmparams.h +++ b/os/ports/GCC/ARMCMx/STM32F1xx/cmparams.h @@ -19,13 +19,13 @@ */
/**
- * @file GCC/ARMCMx/STM32/cmparams.h
- * @brief ARM Cortex-M3 parameters for the STM32.
+ * @file GCC/ARMCMx/STM32F1xx/cmparams.h
+ * @brief ARM Cortex-M3 parameters for the STM32F1xx.
*
- * @defgroup ARMCMx_STM32 STM32 Specific Parameters
+ * @defgroup ARMCMx_STM32F1xx STM32F1xx Specific Parameters
* @ingroup ARMCMx_SPECIFIC
* @details This file contains the Cortex-M3 specific parameters for the
- * STM32 platform.
+ * STM32F1xx platform.
* @{
*/
diff --git a/os/ports/GCC/ARMCMx/STM32F1xx/ld/STM32F100xB.ld b/os/ports/GCC/ARMCMx/STM32F1xx/ld/STM32F100xB.ld new file mode 100644 index 000000000..deabb622a --- /dev/null +++ b/os/ports/GCC/ARMCMx/STM32F1xx/ld/STM32F100xB.ld @@ -0,0 +1,144 @@ +/*
+ ChibiOS/RT - Copyright (C) 2006,2007,2008,2009,2010,
+ 2011 Giovanni Di Sirio.
+
+ This file is part of ChibiOS/RT.
+
+ ChibiOS/RT is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 3 of the License, or
+ (at your option) any later version.
+
+ ChibiOS/RT is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+/*
+ * ST32F100xB memory setup.
+ */
+__main_stack_size__ = 0x0400;
+__process_stack_size__ = 0x0400;
+
+MEMORY
+{
+ flash : org = 0x08000000, len = 128k
+ ram : org = 0x20000000, len = 8k
+}
+
+__ram_start__ = ORIGIN(ram);
+__ram_size__ = LENGTH(ram);
+__ram_end__ = __ram_start__ + __ram_size__;
+
+SECTIONS
+{
+ . = 0;
+ _text = .;
+
+ startup : ALIGN(16) SUBALIGN(16)
+ {
+ KEEP(*(vectors))
+ } > flash
+
+ constructors : ALIGN(4) SUBALIGN(4)
+ {
+ PROVIDE(__init_array_start = .);
+ KEEP(*(SORT(.init_array.*)))
+ KEEP(*(.init_array))
+ PROVIDE(__init_array_end = .);
+ } > flash
+
+ destructors : ALIGN(4) SUBALIGN(4)
+ {
+ PROVIDE(__fini_array_start = .);
+ KEEP(*(.fini_array))
+ KEEP(*(SORT(.fini_array.*)))
+ PROVIDE(__fini_array_end = .);
+ } > flash
+
+ .text : ALIGN(16) SUBALIGN(16)
+ {
+ *(.text.startup.*)
+ *(.text)
+ *(.text.*)
+ *(.rodata)
+ *(.rodata.*)
+ *(.glue_7t)
+ *(.glue_7)
+ *(.gcc*)
+ } > flash
+
+ .ARM.extab :
+ {
+ *(.ARM.extab* .gnu.linkonce.armextab.*)
+ } > flash
+
+ .ARM.exidx : {
+ PROVIDE(__exidx_start = .);
+ *(.ARM.exidx* .gnu.linkonce.armexidx.*)
+ PROVIDE(__exidx_end = .);
+ } > flash
+
+ .eh_frame_hdr :
+ {
+ *(.eh_frame_hdr)
+ } > flash
+
+ .eh_frame : ONLY_IF_RO
+ {
+ *(.eh_frame)
+ } > flash
+
+ . = ALIGN(4);
+ _etext = .;
+ _textdata = _etext;
+
+ .stacks :
+ {
+ . = ALIGN(8);
+ __main_stack_base__ = .;
+ . += __main_stack_size__;
+ . = ALIGN(8);
+ __main_stack_end__ = .;
+ __process_stack_base__ = .;
+ __main_thread_stack_base__ = .;
+ . += __process_stack_size__;
+ . = ALIGN(8);
+ __process_stack_end__ = .;
+ __main_thread_stack_end__ = .;
+ } > ram
+
+ .data :
+ {
+ PROVIDE(_data = .);
+ *(.data)
+ . = ALIGN(4);
+ *(.data.*)
+ . = ALIGN(4);
+ *(.ramtext)
+ . = ALIGN(4);
+ PROVIDE(_edata = .);
+ } > ram AT > flash
+
+ .bss :
+ {
+ PROVIDE(_bss_start = .);
+ *(.bss)
+ . = ALIGN(4);
+ *(.bss.*)
+ . = ALIGN(4);
+ *(COMMON)
+ . = ALIGN(4);
+ PROVIDE(_bss_end = .);
+ } > ram
+}
+
+PROVIDE(end = .);
+_end = .;
+
+__heap_base__ = _end;
+__heap_end__ = __ram_end__;
diff --git a/os/ports/GCC/ARMCMx/STM32F1xx/ld/STM32F103xB.ld b/os/ports/GCC/ARMCMx/STM32F1xx/ld/STM32F103xB.ld new file mode 100644 index 000000000..b786a6249 --- /dev/null +++ b/os/ports/GCC/ARMCMx/STM32F1xx/ld/STM32F103xB.ld @@ -0,0 +1,144 @@ +/*
+ ChibiOS/RT - Copyright (C) 2006,2007,2008,2009,2010,
+ 2011 Giovanni Di Sirio.
+
+ This file is part of ChibiOS/RT.
+
+ ChibiOS/RT is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 3 of the License, or
+ (at your option) any later version.
+
+ ChibiOS/RT is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+/*
+ * ST32F103xB memory setup.
+ */
+__main_stack_size__ = 0x0400;
+__process_stack_size__ = 0x0400;
+
+MEMORY
+{
+ flash : org = 0x08000000, len = 128k
+ ram : org = 0x20000000, len = 20k
+}
+
+__ram_start__ = ORIGIN(ram);
+__ram_size__ = LENGTH(ram);
+__ram_end__ = __ram_start__ + __ram_size__;
+
+SECTIONS
+{
+ . = 0;
+ _text = .;
+
+ startup : ALIGN(16) SUBALIGN(16)
+ {
+ KEEP(*(vectors))
+ } > flash
+
+ constructors : ALIGN(4) SUBALIGN(4)
+ {
+ PROVIDE(__init_array_start = .);
+ KEEP(*(SORT(.init_array.*)))
+ KEEP(*(.init_array))
+ PROVIDE(__init_array_end = .);
+ } > flash
+
+ destructors : ALIGN(4) SUBALIGN(4)
+ {
+ PROVIDE(__fini_array_start = .);
+ KEEP(*(.fini_array))
+ KEEP(*(SORT(.fini_array.*)))
+ PROVIDE(__fini_array_end = .);
+ } > flash
+
+ .text : ALIGN(16) SUBALIGN(16)
+ {
+ *(.text.startup.*)
+ *(.text)
+ *(.text.*)
+ *(.rodata)
+ *(.rodata.*)
+ *(.glue_7t)
+ *(.glue_7)
+ *(.gcc*)
+ } > flash
+
+ .ARM.extab :
+ {
+ *(.ARM.extab* .gnu.linkonce.armextab.*)
+ } > flash
+
+ .ARM.exidx : {
+ PROVIDE(__exidx_start = .);
+ *(.ARM.exidx* .gnu.linkonce.armexidx.*)
+ PROVIDE(__exidx_end = .);
+ } > flash
+
+ .eh_frame_hdr :
+ {
+ *(.eh_frame_hdr)
+ } > flash
+
+ .eh_frame : ONLY_IF_RO
+ {
+ *(.eh_frame)
+ } > flash
+
+ . = ALIGN(4);
+ _etext = .;
+ _textdata = _etext;
+
+ .stacks :
+ {
+ . = ALIGN(8);
+ __main_stack_base__ = .;
+ . += __main_stack_size__;
+ . = ALIGN(8);
+ __main_stack_end__ = .;
+ __process_stack_base__ = .;
+ __main_thread_stack_base__ = .;
+ . += __process_stack_size__;
+ . = ALIGN(8);
+ __process_stack_end__ = .;
+ __main_thread_stack_end__ = .;
+ } > ram
+
+ .data :
+ {
+ PROVIDE(_data = .);
+ *(.data)
+ . = ALIGN(4);
+ *(.data.*)
+ . = ALIGN(4);
+ *(.ramtext)
+ . = ALIGN(4);
+ PROVIDE(_edata = .);
+ } > ram AT > flash
+
+ .bss :
+ {
+ PROVIDE(_bss_start = .);
+ *(.bss)
+ . = ALIGN(4);
+ *(.bss.*)
+ . = ALIGN(4);
+ *(COMMON)
+ . = ALIGN(4);
+ PROVIDE(_bss_end = .);
+ } > ram
+}
+
+PROVIDE(end = .);
+_end = .;
+
+__heap_base__ = _end;
+__heap_end__ = __ram_end__;
diff --git a/os/ports/GCC/ARMCMx/STM32F1xx/ld/STM32F103xE.ld b/os/ports/GCC/ARMCMx/STM32F1xx/ld/STM32F103xE.ld new file mode 100644 index 000000000..7e6b8ee56 --- /dev/null +++ b/os/ports/GCC/ARMCMx/STM32F1xx/ld/STM32F103xE.ld @@ -0,0 +1,144 @@ +/*
+ ChibiOS/RT - Copyright (C) 2006,2007,2008,2009,2010,
+ 2011 Giovanni Di Sirio.
+
+ This file is part of ChibiOS/RT.
+
+ ChibiOS/RT is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 3 of the License, or
+ (at your option) any later version.
+
+ ChibiOS/RT is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+/*
+ * ST32F103xE memory setup.
+ */
+__main_stack_size__ = 0x0400;
+__process_stack_size__ = 0x0400;
+
+MEMORY
+{
+ flash : org = 0x08000000, len = 1m
+ ram : org = 0x20000000, len = 96k
+}
+
+__ram_start__ = ORIGIN(ram);
+__ram_size__ = LENGTH(ram);
+__ram_end__ = __ram_start__ + __ram_size__;
+
+SECTIONS
+{
+ . = 0;
+ _text = .;
+
+ startup : ALIGN(16) SUBALIGN(16)
+ {
+ KEEP(*(vectors))
+ } > flash
+
+ constructors : ALIGN(4) SUBALIGN(4)
+ {
+ PROVIDE(__init_array_start = .);
+ KEEP(*(SORT(.init_array.*)))
+ KEEP(*(.init_array))
+ PROVIDE(__init_array_end = .);
+ } > flash
+
+ destructors : ALIGN(4) SUBALIGN(4)
+ {
+ PROVIDE(__fini_array_start = .);
+ KEEP(*(.fini_array))
+ KEEP(*(SORT(.fini_array.*)))
+ PROVIDE(__fini_array_end = .);
+ } > flash
+
+ .text : ALIGN(16) SUBALIGN(16)
+ {
+ *(.text.startup.*)
+ *(.text)
+ *(.text.*)
+ *(.rodata)
+ *(.rodata.*)
+ *(.glue_7t)
+ *(.glue_7)
+ *(.gcc*)
+ } > flash
+
+ .ARM.extab :
+ {
+ *(.ARM.extab* .gnu.linkonce.armextab.*)
+ } > flash
+
+ .ARM.exidx : {
+ PROVIDE(__exidx_start = .);
+ *(.ARM.exidx* .gnu.linkonce.armexidx.*)
+ PROVIDE(__exidx_end = .);
+ } > flash
+
+ .eh_frame_hdr :
+ {
+ *(.eh_frame_hdr)
+ } > flash
+
+ .eh_frame : ONLY_IF_RO
+ {
+ *(.eh_frame)
+ } > flash
+
+ . = ALIGN(4);
+ _etext = .;
+ _textdata = _etext;
+
+ .stacks :
+ {
+ . = ALIGN(8);
+ __main_stack_base__ = .;
+ . += __main_stack_size__;
+ . = ALIGN(8);
+ __main_stack_end__ = .;
+ __process_stack_base__ = .;
+ __main_thread_stack_base__ = .;
+ . += __process_stack_size__;
+ . = ALIGN(8);
+ __process_stack_end__ = .;
+ __main_thread_stack_end__ = .;
+ } > ram
+
+ .data :
+ {
+ PROVIDE(_data = .);
+ *(.data)
+ . = ALIGN(4);
+ *(.data.*)
+ . = ALIGN(4);
+ *(.ramtext)
+ . = ALIGN(4);
+ PROVIDE(_edata = .);
+ } > ram AT > flash
+
+ .bss :
+ {
+ PROVIDE(_bss_start = .);
+ *(.bss)
+ . = ALIGN(4);
+ *(.bss.*)
+ . = ALIGN(4);
+ *(COMMON)
+ . = ALIGN(4);
+ PROVIDE(_bss_end = .);
+ } > ram
+}
+
+PROVIDE(end = .);
+_end = .;
+
+__heap_base__ = _end;
+__heap_end__ = __ram_end__;
diff --git a/os/ports/GCC/ARMCMx/STM32F1xx/ld/STM32F107xC.ld b/os/ports/GCC/ARMCMx/STM32F1xx/ld/STM32F107xC.ld new file mode 100644 index 000000000..711b50a30 --- /dev/null +++ b/os/ports/GCC/ARMCMx/STM32F1xx/ld/STM32F107xC.ld @@ -0,0 +1,144 @@ +/*
+ ChibiOS/RT - Copyright (C) 2006,2007,2008,2009,2010,
+ 2011 Giovanni Di Sirio.
+
+ This file is part of ChibiOS/RT.
+
+ ChibiOS/RT is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 3 of the License, or
+ (at your option) any later version.
+
+ ChibiOS/RT is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+/*
+ * ST32F107xC memory setup.
+ */
+__main_stack_size__ = 0x0400;
+__process_stack_size__ = 0x0400;
+
+MEMORY
+{
+ flash : org = 0x08000000, len = 256k
+ ram : org = 0x20000000, len = 64k
+}
+
+__ram_start__ = ORIGIN(ram);
+__ram_size__ = LENGTH(ram);
+__ram_end__ = __ram_start__ + __ram_size__;
+
+SECTIONS
+{
+ . = 0;
+ _text = .;
+
+ startup : ALIGN(16) SUBALIGN(16)
+ {
+ KEEP(*(vectors))
+ } > flash
+
+ constructors : ALIGN(4) SUBALIGN(4)
+ {
+ PROVIDE(__init_array_start = .);
+ KEEP(*(SORT(.init_array.*)))
+ KEEP(*(.init_array))
+ PROVIDE(__init_array_end = .);
+ } > flash
+
+ destructors : ALIGN(4) SUBALIGN(4)
+ {
+ PROVIDE(__fini_array_start = .);
+ KEEP(*(.fini_array))
+ KEEP(*(SORT(.fini_array.*)))
+ PROVIDE(__fini_array_end = .);
+ } > flash
+
+ .text : ALIGN(16) SUBALIGN(16)
+ {
+ *(.text.startup.*)
+ *(.text)
+ *(.text.*)
+ *(.rodata)
+ *(.rodata.*)
+ *(.glue_7t)
+ *(.glue_7)
+ *(.gcc*)
+ } > flash
+
+ .ARM.extab :
+ {
+ *(.ARM.extab* .gnu.linkonce.armextab.*)
+ } > flash
+
+ .ARM.exidx : {
+ PROVIDE(__exidx_start = .);
+ *(.ARM.exidx* .gnu.linkonce.armexidx.*)
+ PROVIDE(__exidx_end = .);
+ } > flash
+
+ .eh_frame_hdr :
+ {
+ *(.eh_frame_hdr)
+ } > flash
+
+ .eh_frame : ONLY_IF_RO
+ {
+ *(.eh_frame)
+ } > flash
+
+ . = ALIGN(4);
+ _etext = .;
+ _textdata = _etext;
+
+ .stacks :
+ {
+ . = ALIGN(8);
+ __main_stack_base__ = .;
+ . += __main_stack_size__;
+ . = ALIGN(8);
+ __main_stack_end__ = .;
+ __process_stack_base__ = .;
+ __main_thread_stack_base__ = .;
+ . += __process_stack_size__;
+ . = ALIGN(8);
+ __process_stack_end__ = .;
+ __main_thread_stack_end__ = .;
+ } > ram
+
+ .data :
+ {
+ PROVIDE(_data = .);
+ *(.data)
+ . = ALIGN(4);
+ *(.data.*)
+ . = ALIGN(4);
+ *(.ramtext)
+ . = ALIGN(4);
+ PROVIDE(_edata = .);
+ } > ram AT > flash
+
+ .bss :
+ {
+ PROVIDE(_bss_start = .);
+ *(.bss)
+ . = ALIGN(4);
+ *(.bss.*)
+ . = ALIGN(4);
+ *(COMMON)
+ . = ALIGN(4);
+ PROVIDE(_bss_end = .);
+ } > ram
+}
+
+PROVIDE(end = .);
+_end = .;
+
+__heap_base__ = _end;
+__heap_end__ = __ram_end__;
diff --git a/os/ports/GCC/ARMCMx/STM32F1xx/port.mk b/os/ports/GCC/ARMCMx/STM32F1xx/port.mk new file mode 100644 index 000000000..fed431182 --- /dev/null +++ b/os/ports/GCC/ARMCMx/STM32F1xx/port.mk @@ -0,0 +1,14 @@ +# List of the ChibiOS/RT Cortex-M3 STM32 port files.
+PORTSRC = $(CHIBIOS)/os/ports/GCC/ARMCMx/crt0.c \
+ $(CHIBIOS)/os/ports/GCC/ARMCMx/STM32F1xx/vectors.c \
+ ${CHIBIOS}/os/ports/GCC/ARMCMx/chcore.c \
+ ${CHIBIOS}/os/ports/GCC/ARMCMx/chcore_v7m.c \
+ ${CHIBIOS}/os/ports/GCC/ARMCMx/nvic.c
+
+PORTASM =
+
+PORTINC = ${CHIBIOS}/os/ports/common/ARMCMx/CMSIS/include \
+ ${CHIBIOS}/os/ports/GCC/ARMCMx \
+ ${CHIBIOS}/os/ports/GCC/ARMCMx/STM32F1xx
+
+PORTLD = ${CHIBIOS}/os/ports/GCC/ARMCMx/STM32F1xx/ld
diff --git a/os/ports/GCC/ARMCMx/STM32/vectors.c b/os/ports/GCC/ARMCMx/STM32F1xx/vectors.c index f12e2e867..d47eeb72e 100644 --- a/os/ports/GCC/ARMCMx/STM32/vectors.c +++ b/os/ports/GCC/ARMCMx/STM32F1xx/vectors.c @@ -19,12 +19,12 @@ */
/**
- * @file GCC/ARMCMx/STM32/vectors.c
- * @brief Interrupt vectors for the STM32 family.
+ * @file GCC/ARMCMx/STM32F1xx/vectors.c
+ * @brief Interrupt vectors for the STM32F1xx family.
*
- * @defgroup ARMCMx_STM32_VECTORS STM32 Interrupt Vectors
+ * @defgroup ARMCMx_STM32F1xx_VECTORS STM32F1xx Interrupt Vectors
* @ingroup ARMCMx_SPECIFIC
- * @details Interrupt vectors for the STM32 family.
+ * @details Interrupt vectors for the STM32F1xx family.
* @{
*/
@@ -38,7 +38,7 @@ #endif
#if !defined(__DOXYGEN__)
-extern void __ram_end__(void);
+extern void __main_stack_end__(void);
extern void ResetHandler(void);
extern void NMIVector(void);
extern void HardFaultVector(void);
@@ -138,7 +138,7 @@ extern void Vector14C(void); __attribute__ ((section("vectors")))
#endif
void (*_vectors[])(void) = {
- __ram_end__, ResetHandler, NMIVector, HardFaultVector,
+ __main_stack_end__, ResetHandler, NMIVector, HardFaultVector,
MemManageVector, BusFaultVector, UsageFaultVector, Vector1C,
Vector20, Vector24, Vector28, SVCallVector,
DebugMonitorVector, Vector34, PendSVVector, SysTickVector,
diff --git a/os/ports/GCC/ARMCMx/STM32L1xx/ld/STM32L152xB.ld b/os/ports/GCC/ARMCMx/STM32L1xx/ld/STM32L152xB.ld new file mode 100644 index 000000000..03516cfa3 --- /dev/null +++ b/os/ports/GCC/ARMCMx/STM32L1xx/ld/STM32L152xB.ld @@ -0,0 +1,144 @@ +/*
+ ChibiOS/RT - Copyright (C) 2006,2007,2008,2009,2010,
+ 2011 Giovanni Di Sirio.
+
+ This file is part of ChibiOS/RT.
+
+ ChibiOS/RT is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 3 of the License, or
+ (at your option) any later version.
+
+ ChibiOS/RT is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+/*
+ * ST32L1152xB memory setup.
+ */
+__main_stack_size__ = 0x0400;
+__process_stack_size__ = 0x0400;
+
+MEMORY
+{
+ flash : org = 0x08000000, len = 128k
+ ram : org = 0x20000000, len = 16k
+}
+
+__ram_start__ = ORIGIN(ram);
+__ram_size__ = LENGTH(ram);
+__ram_end__ = __ram_start__ + __ram_size__;
+
+SECTIONS
+{
+ . = 0;
+ _text = .;
+
+ startup : ALIGN(16) SUBALIGN(16)
+ {
+ KEEP(*(vectors))
+ } > flash
+
+ constructors : ALIGN(4) SUBALIGN(4)
+ {
+ PROVIDE(__init_array_start = .);
+ KEEP(*(SORT(.init_array.*)))
+ KEEP(*(.init_array))
+ PROVIDE(__init_array_end = .);
+ } > flash
+
+ destructors : ALIGN(4) SUBALIGN(4)
+ {
+ PROVIDE(__fini_array_start = .);
+ KEEP(*(.fini_array))
+ KEEP(*(SORT(.fini_array.*)))
+ PROVIDE(__fini_array_end = .);
+ } > flash
+
+ .text : ALIGN(16) SUBALIGN(16)
+ {
+ *(.text.startup.*)
+ *(.text)
+ *(.text.*)
+ *(.rodata)
+ *(.rodata.*)
+ *(.glue_7t)
+ *(.glue_7)
+ *(.gcc*)
+ } > flash
+
+ .ARM.extab :
+ {
+ *(.ARM.extab* .gnu.linkonce.armextab.*)
+ } > flash
+
+ .ARM.exidx : {
+ PROVIDE(__exidx_start = .);
+ *(.ARM.exidx* .gnu.linkonce.armexidx.*)
+ PROVIDE(__exidx_end = .);
+ } > flash
+
+ .eh_frame_hdr :
+ {
+ *(.eh_frame_hdr)
+ } > flash
+
+ .eh_frame : ONLY_IF_RO
+ {
+ *(.eh_frame)
+ } > flash
+
+ . = ALIGN(4);
+ _etext = .;
+ _textdata = _etext;
+
+ .stacks :
+ {
+ . = ALIGN(8);
+ __main_stack_base__ = .;
+ . += __main_stack_size__;
+ . = ALIGN(8);
+ __main_stack_end__ = .;
+ __process_stack_base__ = .;
+ __main_thread_stack_base__ = .;
+ . += __process_stack_size__;
+ . = ALIGN(8);
+ __process_stack_end__ = .;
+ __main_thread_stack_end__ = .;
+ } > ram
+
+ .data :
+ {
+ PROVIDE(_data = .);
+ *(.data)
+ . = ALIGN(4);
+ *(.data.*)
+ . = ALIGN(4);
+ *(.ramtext)
+ . = ALIGN(4);
+ PROVIDE(_edata = .);
+ } > ram AT > flash
+
+ .bss :
+ {
+ PROVIDE(_bss_start = .);
+ *(.bss)
+ . = ALIGN(4);
+ *(.bss.*)
+ . = ALIGN(4);
+ *(COMMON)
+ . = ALIGN(4);
+ PROVIDE(_bss_end = .);
+ } > ram
+}
+
+PROVIDE(end = .);
+_end = .;
+
+__heap_base__ = _end;
+__heap_end__ = __ram_end__;
diff --git a/os/ports/GCC/ARMCMx/STM32L1xx/port.mk b/os/ports/GCC/ARMCMx/STM32L1xx/port.mk index 2a2356936..4ed269619 100644 --- a/os/ports/GCC/ARMCMx/STM32L1xx/port.mk +++ b/os/ports/GCC/ARMCMx/STM32L1xx/port.mk @@ -7,5 +7,8 @@ PORTSRC = $(CHIBIOS)/os/ports/GCC/ARMCMx/crt0.c \ PORTASM =
-PORTINC = ${CHIBIOS}/os/ports/GCC/ARMCMx \
+PORTINC = ${CHIBIOS}/os/ports/common/ARMCMx/CMSIS/include \
+ ${CHIBIOS}/os/ports/GCC/ARMCMx \
${CHIBIOS}/os/ports/GCC/ARMCMx/STM32L1xx
+
+PORTLD = ${CHIBIOS}/os/ports/GCC/ARMCMx/STM32L1xx/ld
diff --git a/os/ports/GCC/ARMCMx/chcore_v6m.h b/os/ports/GCC/ARMCMx/chcore_v6m.h index 2141ee468..b98be1166 100644 --- a/os/ports/GCC/ARMCMx/chcore_v6m.h +++ b/os/ports/GCC/ARMCMx/chcore_v6m.h @@ -238,12 +238,12 @@ struct intctx { * @param[in] ntp the thread to be switched in
* @param[in] otp the thread to be switched out
*/
-#if !defined(CH_DBG_ENABLE_STACK_CHECK) || defined(__DOXYGEN__)
+#if !CH_DBG_ENABLE_STACK_CHECK || defined(__DOXYGEN__)
#define port_switch(ntp, otp) _port_switch(ntp, otp)
#else
#define port_switch(ntp, otp) { \
register struct intctx *r13 asm ("r13"); \
- if ((void *)(r13 - 1) < (void *)(otp + 1)) \
+ if ((stkalign_t *)(r13 - 1) < otp->p_stklimit) \
chDbgPanic("stack overflow"); \
_port_switch(ntp, otp); \
}
diff --git a/os/ports/GCC/ARMCMx/chcore_v7m.c b/os/ports/GCC/ARMCMx/chcore_v7m.c index 897c90a96..39711ce79 100644 --- a/os/ports/GCC/ARMCMx/chcore_v7m.c +++ b/os/ports/GCC/ARMCMx/chcore_v7m.c @@ -166,15 +166,7 @@ void _port_switch_from_isr(void) { #if !defined(__DOXYGEN__)
__attribute__((naked))
#endif
-void port_switch(Thread *ntp, Thread *otp) {
-
-#if CH_DBG_ENABLE_STACK_CHECK
- /* Stack overflow check, if enabled.*/
- register struct intctx *r13 asm ("r13");
- if ((void *)(r13 - 1) < (void *)(otp + 1))
- asm volatile ("movs r0, #0 \n\t"
- "b chDbgPanic");
-#endif /* CH_DBG_ENABLE_STACK_CHECK */
+void _port_switch(Thread *ntp, Thread *otp) {
PUSH_CONTEXT();
diff --git a/os/ports/GCC/ARMCMx/chcore_v7m.h b/os/ports/GCC/ARMCMx/chcore_v7m.h index 297bd4e54..3710c2edf 100644 --- a/os/ports/GCC/ARMCMx/chcore_v7m.h +++ b/os/ports/GCC/ARMCMx/chcore_v7m.h @@ -314,11 +314,32 @@ struct intctx { #define port_wait_for_interrupt()
#endif
+/**
+ * @brief Performs a context switch between two threads.
+ * @details This is the most critical code in any port, this function
+ * is responsible for the context switch between 2 threads.
+ * @note The implementation of this code affects <b>directly</b> the context
+ * switch performance so optimize here as much as you can.
+ *
+ * @param[in] ntp the thread to be switched in
+ * @param[in] otp the thread to be switched out
+ */
+#if !CH_DBG_ENABLE_STACK_CHECK || defined(__DOXYGEN__)
+#define port_switch(ntp, otp) _port_switch(ntp, otp)
+#else
+#define port_switch(ntp, otp) { \
+ register struct intctx *r13 asm ("r13"); \
+ if ((stkalign_t *)(r13 - 1) < otp->p_stklimit) \
+ chDbgPanic("stack overflow"); \
+ _port_switch(ntp, otp); \
+}
+#endif
+
#ifdef __cplusplus
extern "C" {
#endif
void port_halt(void);
- void port_switch(Thread *ntp, Thread *otp);
+ void _port_switch(Thread *ntp, Thread *otp);
void _port_irq_epilogue(void);
void _port_switch_from_isr(void);
void _port_thread_start(void);
diff --git a/os/ports/GCC/ARMCMx/crt0.c b/os/ports/GCC/ARMCMx/crt0.c index 0bb88dd83..6e4524fa9 100644 --- a/os/ports/GCC/ARMCMx/crt0.c +++ b/os/ports/GCC/ARMCMx/crt0.c @@ -25,7 +25,7 @@ * @{
*/
-#include "chtypes.h"
+#include <stdint.h>
#define FALSE 0
#define TRUE (!FALSE)
@@ -39,62 +39,80 @@ typedef funcp_t * funcpp_t; * stack (dual stack mode).
*/
#if !defined(CRT0_CONTROL_INIT) || defined(__DOXYGEN__)
-#define CRT0_CONTROL_INIT 0x00000002
+#define CRT0_CONTROL_INIT 0x00000002
+#endif
+
+/**
+ * @brief Stack segments initialization switch.
+ */
+#if !defined(CRT0_STACKS_FILL_PATTERN) || defined(__DOXYGEN__)
+#define CRT0_STACKS_FILL_PATTERN 0x55555555
+#endif
+
+/**
+ * @brief Stack segments initialization switch.
+ */
+#if !defined(CRT0_INIT_STACKS) || defined(__DOXYGEN__)
+#define CRT0_INIT_STACKS TRUE
#endif
/**
* @brief DATA segment initialization switch.
*/
#if !defined(CRT0_INIT_DATA) || defined(__DOXYGEN__)
-#define CRT0_INIT_DATA TRUE
+#define CRT0_INIT_DATA TRUE
#endif
/**
* @brief BSS segment initialization switch.
*/
#if !defined(CRT0_INIT_BSS) || defined(__DOXYGEN__)
-#define CRT0_INIT_BSS TRUE
+#define CRT0_INIT_BSS TRUE
#endif
/**
* @brief Constructors invocation switch.
*/
#if !defined(CRT0_CALL_CONSTRUCTORS) || defined(__DOXYGEN__)
-#define CRT0_CALL_CONSTRUCTORS TRUE
+#define CRT0_CALL_CONSTRUCTORS TRUE
#endif
/**
* @brief Destructors invocation switch.
*/
#if !defined(CRT0_CALL_DESTRUCTORS) || defined(__DOXYGEN__)
-#define CRT0_CALL_DESTRUCTORS TRUE
+#define CRT0_CALL_DESTRUCTORS TRUE
#endif
#define SYMVAL(sym) (uint32_t)(((uint8_t *)&(sym)) - ((uint8_t *)0))
/**
- * @brief Ram end.
+ * @brief Main stack lower boundary.
+ * @details This symbol must be exported by the linker script and represents
+ * the main stack lower boundary.
+ */
+extern uint32_t __main_stack_base__;
+
+/**
+ * @brief Main stack initial position.
* @details This symbol must be exported by the linker script and represents
- * the location after the last RAM location.
+ * the main stack initial position.
*/
-extern uint8_t __ram_end__;
+extern uint32_t __main_stack_end__;
/**
- * @brief Main stack size.
+ * @brief Process stack lower boundary.
* @details This symbol must be exported by the linker script and represents
- * the main stack size.
- * @note The main stack is the stack where interrupts and exceptions are
- * processed.
+ * the process stack lower boundary.
*/
-extern uint8_t __main_stack_size__;
+extern uint32_t __process_stack_base__;
/**
- * @brief Process stack size.
+ * @brief Process stack initial position.
* @details This symbol must be exported by the linker script and represents
- * the process stack size.
- * @note The process stack is the stack used by the @p main() function.
+ * the process stack initial position.
*/
-extern uint8_t __process_stack_size__;
+extern uint32_t __process_stack_end__;
/**
* @brief ROM image of the data segment start.
@@ -194,6 +212,19 @@ void _default_exit(void) { }
/**
+ * @brief Memory fill.
+ *
+ * @param[in] start fill area start
+ * @param[in] end fill area end
+ * @param[in] filler filler pattern
+ */
+static void fill32(uint32_t *start, uint32_t *end, uint32_t filler) {
+
+ while (start < end)
+ *start++ = filler;
+}
+
+/**
* @brief Reset vector.
*/
#if !defined(__DOXYGEN__)
@@ -206,7 +237,7 @@ void ResetHandler(void) { main stack is assumed to be allocated starting from @p __ram_end__
extending downward.*/
asm volatile ("cpsid i");
- psp = SYMVAL(__ram_end__) - SYMVAL(__main_stack_size__);
+ psp = SYMVAL(__process_stack_end__);
asm volatile ("msr PSP, %0" : : "r" (psp));
ctl = CRT0_CONTROL_INIT;
@@ -216,6 +247,16 @@ void ResetHandler(void) { /* Early initialization hook invocation.*/
__early_init();
+#if CRT0_INIT_STACKS
+ /* Main and Process stacks initialization.*/
+ fill32(&__main_stack_base__,
+ &__main_stack_end__,
+ CRT0_STACKS_FILL_PATTERN);
+ fill32(&__process_stack_base__,
+ &__process_stack_end__,
+ CRT0_STACKS_FILL_PATTERN);
+#endif
+
#if CRT0_INIT_DATA
/* DATA segment initialization.*/
{
@@ -230,13 +271,7 @@ void ResetHandler(void) { #if CRT0_INIT_BSS
/* BSS segment initialization.*/
- {
- uint32_t *bp;
-
- bp = &_bss_start;
- while (bp < &_bss_end)
- *bp++ = 0;
- }
+ fill32(&_bss_start, &_bss_end, 0);
#endif
/* Late initialization hook invocation.*/
diff --git a/os/ports/GCC/ARMCMx/crt0_v6m.s b/os/ports/GCC/ARMCMx/crt0_v6m.s deleted file mode 100644 index 478625d42..000000000 --- a/os/ports/GCC/ARMCMx/crt0_v6m.s +++ /dev/null @@ -1,133 +0,0 @@ -/*
- ChibiOS/RT - Copyright (C) 2006,2007,2008,2009,2010,
- 2011 Giovanni Di Sirio.
-
- This file is part of ChibiOS/RT.
-
- ChibiOS/RT is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 3 of the License, or
- (at your option) any later version.
-
- ChibiOS/RT is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-
-/**
- * @file GCC/ARMCMx/crt0_v6m.s
- * @brief Generic ARMv6-M (Cortex-M0/M1) startup file for ChibiOS/RT.
- *
- * @addtogroup ARMCMx_CORE
- * @{
- */
-
-#if !defined(__DOXYGEN__)
-
- .set CONTROL_MODE_PRIVILEGED, 0
- .set CONTROL_MODE_UNPRIVILEGED, 1
- .set CONTROL_USE_MSP, 0
- .set CONTROL_USE_PSP, 2
-
- .text
- .balign 2
- .syntax unified
- .thumb
-
-/*
- * Reset handler.
- */
- .thumb_func
- .global ResetHandler
- .weak ResetHandler
-ResetHandler:
- /*
- * Interrupts are globally masked initially.
- */
- cpsid i
- /*
- * Stack pointers initialization.
- */
- ldr r0, =__ram_end__
- ldr r1, =__main_stack_size__
- subs r0, r0, r1
- /*
- * Note that r0 is the main stack low boundary address and process
- * stack initial top address.
- */
- msr PSP, r0
- /*
- * Early initialization phase, it is empty by default.
- */
- bl __early_init
- /*
- * Data initialization.
- * NOTE: It assumes that the DATA size is a multiple of 4.
- */
- ldr r1, =_textdata
- ldr r2, =_data
- ldr r3, =_edata
-dloop:
- cmp r2, r3
- bge enddloop
- ldr r0, [r1]
- str r0, [r2]
- adds r1, r1, #4
- adds r2, r2, #4
- b dloop
-enddloop:
- /*
- * BSS initialization.
- * NOTE: It assumes that the BSS size is a multiple of 4.
- */
- movs r0, #0
- ldr r1, =_bss_start
- ldr r2, =_bss_end
-bloop:
- cmp r1, r2
- bge endbloop
- str r0, [r1]
- adds r1, r1, #4
- b bloop
-endbloop:
- /*
- * Switches to the Process Stack and uses a barrier just to be safe.
- */
- movs r0, #CONTROL_MODE_PRIVILEGED | CONTROL_USE_PSP
- msr CONTROL, r0
- isb
- /*
- * Main program invocation.
- */
- bl main
- b _main_exit_handler
-
-/*
- * Default main exit code, just a loop.
- * It is a weak symbol, the application code can redefine the behavior.
- */
- .thumb_func
- .global _main_exit_handler
- .weak _main_exit_handler
-_main_exit_handler:
-.loop: b .loop
-
-/*
- * Default early initialization code. It is declared weak in order to be
- * replaced by the real initialization code.
- * The arly initialization is performed just after stacks setup and before BSS
- * and DATA segments initialization.
- */
- .thumb_func
- .global __early_init
- .weak __early_init
-__early_init:
- bx lr
-
-#endif
-
-/** @} */
diff --git a/os/ports/GCC/ARMCMx/crt0_v7m.s b/os/ports/GCC/ARMCMx/crt0_v7m.s deleted file mode 100644 index c5f714a26..000000000 --- a/os/ports/GCC/ARMCMx/crt0_v7m.s +++ /dev/null @@ -1,128 +0,0 @@ -/*
- ChibiOS/RT - Copyright (C) 2006,2007,2008,2009,2010,
- 2011 Giovanni Di Sirio.
-
- This file is part of ChibiOS/RT.
-
- ChibiOS/RT is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 3 of the License, or
- (at your option) any later version.
-
- ChibiOS/RT is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-
-/**
- * @file GCC/ARMCMx/crt0_v7m.s
- * @brief Generic ARMv7-M (Cortex-M3/M4) startup file for ChibiOS/RT.
- *
- * @addtogroup ARMCMx_CORE
- * @{
- */
-
-#if !defined(__DOXYGEN__)
-
- .set CONTROL_MODE_PRIVILEGED, 0
- .set CONTROL_MODE_UNPRIVILEGED, 1
- .set CONTROL_USE_MSP, 0
- .set CONTROL_USE_PSP, 2
-
- .text
- .balign 2
- .syntax unified
- .thumb
-
-/*
- * Reset handler.
- */
- .thumb_func
- .global ResetHandler
- .weak ResetHandler
-ResetHandler:
- /*
- * Interrupts are globally masked initially.
- */
- cpsid i
- /*
- * Stack pointers initialization.
- */
- ldr r0, =__ram_end__
- ldr r1, =__main_stack_size__
- subs r0, r0, r1
- /*
- * Note that r0 is the main stack low boundary address and process
- * stack initial top address.
- */
- msr PSP, r0
- /*
- * Early initialization phase, it is empty by default.
- */
- bl __early_init
- /*
- * Data initialization.
- * NOTE: It assumes that the DATA size is a multiple of 4.
- */
- ldr r1, =_textdata
- ldr r2, =_data
- ldr r3, =_edata
-dloop:
- cmp r2, r3
- ittt lo
- ldrlo r0, [r1], #4
- strlo r0, [r2], #4
- blo dloop
- /*
- * BSS initialization.
- * NOTE: It assumes that the BSS size is a multiple of 4.
- */
- movs r0, #0
- ldr r1, =_bss_start
- ldr r2, =_bss_end
-bloop:
- cmp r1, r2
- itt lo
- strlo r0, [r1], #4
- blo bloop
- /*
- * Switches to the Process Stack and uses a barrier just to be safe.
- */
- movs r0, #CONTROL_MODE_PRIVILEGED | CONTROL_USE_PSP
- msr CONTROL, r0
- isb
- /*
- * Main program invocation.
- */
- bl main
- b _main_exit_handler
-
-/*
- * Default main exit code, just a loop.
- * It is a weak symbol, the application code can redefine the behavior.
- */
- .thumb_func
- .global _main_exit_handler
- .weak _main_exit_handler
-_main_exit_handler:
-.loop: b .loop
-
-/*
- * Default early initialization code. It is declared weak in order to be
- * replaced by the real initialization code.
- * The arly initialization is performed just after stacks setup and before BSS
- * and DATA segments initialization.
- */
- .thumb_func
- .global __early_init
- .weak __early_init
-__early_init:
- bx lr
-
-#endif
-
-/** @} */
diff --git a/os/ports/GCC/ARMCMx/old/chcore_v7m.c b/os/ports/GCC/ARMCMx/old/chcore_v7m.c deleted file mode 100644 index 244ff396e..000000000 --- a/os/ports/GCC/ARMCMx/old/chcore_v7m.c +++ /dev/null @@ -1,126 +0,0 @@ -/*
- ChibiOS/RT - Copyright (C) 2006,2007,2008,2009,2010,
- 2011 Giovanni Di Sirio.
-
- This file is part of ChibiOS/RT.
-
- ChibiOS/RT is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 3 of the License, or
- (at your option) any later version.
-
- ChibiOS/RT is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-
-/**
- * @file ARMCMx/chcore_v7m.c
- * @brief ARMv7-M architecture port code.
- *
- * @addtogroup ARMCMx_V7M_CORE
- * @{
- */
-
-#include "ch.h"
-
-#if !CH_OPTIMIZE_SPEED
-void _port_lock(void) {
- register uint32_t tmp asm ("r3") = CORTEX_BASEPRI_KERNEL;
- asm volatile ("msr BASEPRI, %0" : : "r" (tmp));
-}
-
-void _port_unlock(void) {
- register uint32_t tmp asm ("r3") = CORTEX_BASEPRI_DISABLED;
- asm volatile ("msr BASEPRI, %0" : : "r" (tmp));
-}
-#endif
-
-/**
- * @brief System Timer vector.
- * @details This interrupt is used as system tick.
- * @note The timer must be initialized in the startup code.
- */
-void SysTickVector(void) {
-
- chSysLockFromIsr();
- chSysTimerHandlerI();
- if (chSchIsRescRequiredExI())
- SCB_ICSR = ICSR_PENDSVSET;
- chSysUnlockFromIsr();
-}
-
-#define PUSH_CONTEXT(sp, prio) { \
- asm volatile ("mrs %0, PSP \n\t" \
- "stmdb %0!, {r3-r11,lr}" : \
- "=r" (sp) : "r" (sp), "r" (prio)); \
-}
-
-#define POP_CONTEXT(sp) { \
- asm volatile ("ldmia %0!, {r3-r11, lr} \n\t" \
- "msr PSP, %0 \n\t" \
- "msr BASEPRI, r3 \n\t" \
- "bx lr" : "=r" (sp) : "r" (sp)); \
-}
-
-/**
- * @brief SVC vector.
- * @details The SVC vector is used for commanded context switch. Structures
- * @p intctx are saved and restored from the process stacks of the
- * switched threads.
- *
- * @param[in] ntp the thread to be switched it
- * @param[in] otp the thread to be switched out
- */
-#if !defined(__DOXYGEN__)
-__attribute__((naked))
-#endif
-void SVCallVector(Thread *ntp, Thread *otp) {
- register struct intctx *sp_thd asm("r2");
- register uint32_t prio asm ("r3");
-
- asm volatile ("mrs r3, BASEPRI" : "=r" (prio) : );
- PUSH_CONTEXT(sp_thd, prio)
-
- otp->p_ctx.r13 = sp_thd;
- sp_thd = ntp->p_ctx.r13;
-
- POP_CONTEXT(sp_thd)
-}
-
-/**
- * @brief Preemption code.
- */
-#if !defined(__DOXYGEN__)
-__attribute__((naked))
-#endif
-void PendSVVector(void) {
- register struct intctx *sp_thd asm("r2");
- register uint32_t prio asm ("r3");
- Thread *otp, *ntp;
-
- chSysLockFromIsr();
-
- prio = CORTEX_BASEPRI_DISABLED;
- PUSH_CONTEXT(sp_thd, prio)
-
- (otp = currp)->p_ctx.r13 = sp_thd;
- ntp = fifo_remove(&rlist.r_queue);
- setcurrp(ntp);
- ntp->p_state = THD_STATE_CURRENT;
- chSchReadyI(otp);
-#if CH_TIME_QUANTUM > 0
- /* Set the round-robin time quantum.*/
- rlist.r_preempt = CH_TIME_QUANTUM;
-#endif
- chDbgTrace(otp);
- sp_thd = ntp->p_ctx.r13;
-
- POP_CONTEXT(sp_thd)
-}
-
-/** @} */
diff --git a/os/ports/GCC/ARMCMx/old/chcore_v7m.h b/os/ports/GCC/ARMCMx/old/chcore_v7m.h deleted file mode 100644 index b94afdca3..000000000 --- a/os/ports/GCC/ARMCMx/old/chcore_v7m.h +++ /dev/null @@ -1,299 +0,0 @@ -/*
- ChibiOS/RT - Copyright (C) 2006,2007,2008,2009,2010,
- 2011 Giovanni Di Sirio.
-
- This file is part of ChibiOS/RT.
-
- ChibiOS/RT is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 3 of the License, or
- (at your option) any later version.
-
- ChibiOS/RT is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-
-/**
- * @file ARMCMx/chcore_v7m.h
- * @brief ARMv7-M architecture port macros and structures.
- *
- * @addtogroup ARMCMx_V7M_CORE
- * @{
- */
-
-#ifndef _CHCORE_V7M_H_
-#define _CHCORE_V7M_H_
-
-/*===========================================================================*/
-/* Port implementation part. */
-/*===========================================================================*/
-
-#if !defined(__DOXYGEN__)
-/**
- * @brief Interrupt saved context.
- * @details This structure represents the stack frame saved during a
- * preemption-capable interrupt handler.
- * @note This structure is empty in this port.
- */
-struct extctx {
-};
-#endif
-
-#if !defined(__DOXYGEN__)
-/**
- * @brief System saved context.
- * @details This structure represents the inner stack frame during a context
- * switching.
- */
-struct intctx {
- regarm_t basepri;
- regarm_t r4;
- regarm_t r5;
- regarm_t r6;
-#ifndef CH_CURRP_REGISTER_CACHE
- regarm_t r7;
-#endif
- regarm_t r8;
- regarm_t r9;
- regarm_t r10;
- regarm_t r11;
- regarm_t lr_exc;
- /* Start of the hardware saved frame.*/
- regarm_t r0;
- regarm_t r1;
- regarm_t r2;
- regarm_t r3;
- regarm_t r12;
- regarm_t lr_thd;
- regarm_t pc;
- regarm_t xpsr;
-};
-#endif
-
-/**
- * @brief Platform dependent part of the @p chThdInit() API.
- * @details This code usually setup the context switching frame represented
- * by an @p intctx structure.
- */
-#define SETUP_CONTEXT(workspace, wsize, pf, arg) { \
- tp->p_ctx.r13 = (struct intctx *)((uint8_t *)workspace + \
- wsize - \
- sizeof(struct intctx)); \
- tp->p_ctx.r13->basepri = CORTEX_BASEPRI_DISABLED; \
- tp->p_ctx.r13->lr_exc = (regarm_t)0xFFFFFFFD; \
- tp->p_ctx.r13->r0 = arg; \
- tp->p_ctx.r13->lr_thd = chThdExit; \
- tp->p_ctx.r13->pc = pf; \
- tp->p_ctx.r13->xpsr = (regarm_t)0x01000000; \
-}
-
-/**
- * @brief Stack size for the system idle thread.
- * @details This size depends on the idle thread implementation, usually
- * the idle thread should take no more space than those reserved
- * by @p PORT_INT_REQUIRED_STACK.
- * @note In this port it is set to 4 because the idle thread does have
- * a stack frame when compiling without optimizations.
- */
-#ifndef PORT_IDLE_THREAD_STACK_SIZE
-#define PORT_IDLE_THREAD_STACK_SIZE 4
-#endif
-
-/**
- * @brief Per-thread stack overhead for interrupts servicing.
- * @details This constant is used in the calculation of the correct working
- * area size.
- * This value can be zero on those architecture where there is a
- * separate interrupt stack and the stack space between @p intctx and
- * @p extctx is known to be zero.
- * @note This port requires no extra stack space for interrupt handling.
- */
-#ifndef PORT_INT_REQUIRED_STACK
-#define PORT_INT_REQUIRED_STACK 0
-#endif
-
-/**
- * @brief IRQ prologue code.
- * @details This macro must be inserted at the start of all IRQ handlers
- * enabled to invoke system APIs.
- */
-#define PORT_IRQ_PROLOGUE()
-
-/**
- * @brief IRQ epilogue code.
- * @details This macro must be inserted at the end of all IRQ handlers
- * enabled to invoke system APIs.
- */
-#define PORT_IRQ_EPILOGUE() { \
- chSysLockFromIsr(); \
- if (chSchIsRescRequiredI()) \
- SCB_ICSR = ICSR_PENDSVSET; \
- chSysUnlockFromIsr(); \
-}
-
-/**
- * @brief IRQ handler function declaration.
- * @note @p id can be a function name or a vector number depending on the
- * port implementation.
- */
-#define PORT_IRQ_HANDLER(id) void id(void)
-
-/**
- * @brief Port-related initialization code.
- */
-#define port_init() { \
- SCB_AIRCR = AIRCR_VECTKEY | AIRCR_PRIGROUP(0); \
- NVICSetSystemHandlerPriority(HANDLER_SVCALL, \
- CORTEX_PRIORITY_MASK(CORTEX_PRIORITY_SVCALL)); \
- NVICSetSystemHandlerPriority(HANDLER_PENDSV, \
- CORTEX_PRIORITY_MASK(CORTEX_PRIORITY_PENDSV)); \
- NVICSetSystemHandlerPriority(HANDLER_SYSTICK, \
- CORTEX_PRIORITY_MASK(CORTEX_PRIORITY_SYSTICK)); \
-}
-
-/**
- * @brief Kernel-lock action.
- * @details Usually this function just disables interrupts but may perform
- * more actions.
- * @note In this port this it raises the base priority to kernel level.
- */
-#if CH_OPTIMIZE_SPEED
-#define port_lock() { \
- register uint32_t tmp asm ("r3") = CORTEX_BASEPRI_KERNEL; \
- asm volatile ("msr BASEPRI, %0" : : "r" (tmp) : "memory"); \
-}
-#else
-#define port_lock() { \
- asm volatile ("bl _port_lock" : : : "r3", "lr", "memory"); \
-}
-#endif
-
-/**
- * @brief Kernel-unlock action.
- * @details Usually this function just disables interrupts but may perform
- * more actions.
- * @note In this port this it lowers the base priority to kernel level.
- */
-#if CH_OPTIMIZE_SPEED
-#define port_unlock() { \
- register uint32_t tmp asm ("r3") = CORTEX_BASEPRI_DISABLED; \
- asm volatile ("msr BASEPRI, %0" : : "r" (tmp) : "memory"); \
-}
-#else
-#define port_unlock() { \
- asm volatile ("bl _port_unlock" : : : "r3", "lr", "memory"); \
-}
-#endif
-
-/**
- * @brief Kernel-lock action from an interrupt handler.
- * @details This function is invoked before invoking I-class APIs from
- * interrupt handlers. The implementation is architecture dependent,
- * in its simplest form it is void.
- * @note Same as @p port_lock() in this port.
- */
-#define port_lock_from_isr() port_lock()
-
-/**
- * @brief Kernel-unlock action from an interrupt handler.
- * @details This function is invoked after invoking I-class APIs from interrupt
- * handlers. The implementation is architecture dependent, in its
- * simplest form it is void.
- * @note Same as @p port_unlock() in this port.
- */
-#define port_unlock_from_isr() port_unlock()
-
-/**
- * @brief Disables all the interrupt sources.
- * @note Of course non maskable interrupt sources are not included.
- * @note In this port it disables all the interrupt sources by raising
- * the priority mask to level 0.
- */
-#define port_disable() asm volatile ("cpsid i" : : : "memory")
-
-/**
- * @brief Disables the interrupt sources below kernel-level priority.
- * @note Interrupt sources above kernel level remains enabled.
- * @note In this port it raises/lowers the base priority to kernel level.
- */
-#define port_suspend() { \
- register uint32_t tmp asm ("r3") = CORTEX_BASEPRI_KERNEL; \
- asm volatile ("msr BASEPRI, %0 \n\t" \
- "cpsie i" : : "r" (tmp) : "memory"); \
-}
-
-/**
- * @brief Enables all the interrupt sources.
- * @note In this port it lowers the base priority to user level.
- */
-#define port_enable() { \
- register uint32_t tmp asm ("r3") = CORTEX_BASEPRI_DISABLED; \
- asm volatile ("msr BASEPRI, %0 \n\t" \
- "cpsie i" : : "r" (tmp) : "memory"); \
-}
-
-/**
- * @brief Enters an architecture-dependent IRQ-waiting mode.
- * @details The function is meant to return when an interrupt becomes pending.
- * The simplest implementation is an empty function or macro but this
- * would not take advantage of architecture-specific power saving
- * modes.
- * @note Implemented as an inlined @p WFI instruction.
- */
-#if CORTEX_ENABLE_WFI_IDLE || defined(__DOXYGEN__)
-#define port_wait_for_interrupt() { \
- asm volatile ("wfi" : : : "memory"); \
-}
-#else
-#define port_wait_for_interrupt()
-#endif
-
-/**
- * @brief Performs a context switch between two threads.
- * @details This is the most critical code in any port, this function
- * is responsible for the context switch between 2 threads.
- * @note The implementation of this code affects <b>directly</b> the context
- * switch performance so optimize here as much as you can.
- * @note Implemented as inlined code for performance reasons.
- *
- * @param[in] ntp the thread to be switched in
- * @param[in] otp the thread to be switched out
- */
-#if !CH_DBG_ENABLE_STACK_CHECK || defined(__DOXYGEN__)
-#define port_switch(ntp, otp) { \
- register Thread *_ntp asm ("r0") = (ntp); \
- register Thread *_otp asm ("r1") = (otp); \
- asm volatile ("svc #0" : : "r" (_otp), "r" (_ntp) : "memory"); \
-}
-#else /* CH_DBG_ENABLE_STACK_CHECK */
-#define port_switch(ntp, otp) { \
- register Thread *_ntp asm ("r0") = (ntp); \
- register Thread *_otp asm ("r1") = (otp); \
- register struct intctx *r13 asm ("r13"); \
- if ((void *)(r13 - 1) < (void *)(_otp + 1)) \
- asm volatile ("movs r0, #0 \n\t" \
- "b chDbgPanic"); \
- asm volatile ("svc #0" : : "r" (_otp), "r" (_ntp) : "memory"); \
-}
-#endif /* CH_DBG_ENABLE_STACK_CHECK */
-
-#ifdef __cplusplus
-extern "C" {
-#endif
- void port_halt(void);
-#if !CH_OPTIMIZE_SPEED
- void _port_lock(void);
- void _port_unlock(void);
-#endif
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* _CHCORE_V7M_H_ */
-
-/** @} */
diff --git a/os/ports/IAR/ARMCMx/chcore_v6m.h b/os/ports/IAR/ARMCMx/chcore_v6m.h index 3eed8bf43..a25fde1ef 100644 --- a/os/ports/IAR/ARMCMx/chcore_v6m.h +++ b/os/ports/IAR/ARMCMx/chcore_v6m.h @@ -236,7 +236,7 @@ struct intctx { * @param[in] ntp the thread to be switched in
* @param[in] otp the thread to be switched out
*/
-#if !defined(CH_DBG_ENABLE_STACK_CHECK) || defined(__DOXYGEN__)
+#if !CH_DBG_ENABLE_STACK_CHECK || defined(__DOXYGEN__)
#define port_switch(ntp, otp) _port_switch(ntp, otp)
#else
#define port_switch(ntp, otp) { \
diff --git a/os/ports/IAR/ARMCMx/chcore_v7m.h b/os/ports/IAR/ARMCMx/chcore_v7m.h index ac757a563..059f29711 100644 --- a/os/ports/IAR/ARMCMx/chcore_v7m.h +++ b/os/ports/IAR/ARMCMx/chcore_v7m.h @@ -302,7 +302,7 @@ struct intctx { * @param[in] ntp the thread to be switched in
* @param[in] otp the thread to be switched out
*/
-#if !defined(CH_DBG_ENABLE_STACK_CHECK) || defined(__DOXYGEN__)
+#if !CH_DBG_ENABLE_STACK_CHECK || defined(__DOXYGEN__)
#define port_switch(ntp, otp) _port_switch(ntp, otp)
#else
#define port_switch(ntp, otp) { \
diff --git a/os/ports/RVCT/ARMCMx/chcore_v6m.h b/os/ports/RVCT/ARMCMx/chcore_v6m.h index 347588bbb..7241d462f 100644 --- a/os/ports/RVCT/ARMCMx/chcore_v6m.h +++ b/os/ports/RVCT/ARMCMx/chcore_v6m.h @@ -236,7 +236,7 @@ struct intctx { * @param[in] ntp the thread to be switched in
* @param[in] otp the thread to be switched out
*/
-#if !defined(CH_DBG_ENABLE_STACK_CHECK) || defined(__DOXYGEN__)
+#if !CH_DBG_ENABLE_STACK_CHECK || defined(__DOXYGEN__)
#define port_switch(ntp, otp) _port_switch(ntp, otp)
#else
#define port_switch(ntp, otp) { \
diff --git a/os/ports/RVCT/ARMCMx/chcore_v7m.h b/os/ports/RVCT/ARMCMx/chcore_v7m.h index 14b25fd8c..fdf855f77 100644 --- a/os/ports/RVCT/ARMCMx/chcore_v7m.h +++ b/os/ports/RVCT/ARMCMx/chcore_v7m.h @@ -234,6 +234,7 @@ struct intctx { /**
* @brief Kernel-lock action from an interrupt handler.
* @details This function is invoked before invoking I-class APIs from
+
* interrupt handlers. The implementation is architecture dependent,
* in its simplest form it is void.
* @note Same as @p port_lock() in this port.
@@ -309,7 +310,7 @@ struct intctx { * @param[in] ntp the thread to be switched in
* @param[in] otp the thread to be switched out
*/
-#if !defined(CH_DBG_ENABLE_STACK_CHECK) || defined(__DOXYGEN__)
+#if !CH_DBG_ENABLE_STACK_CHECK || defined(__DOXYGEN__)
#define port_switch(ntp, otp) _port_switch(ntp, otp)
#else
#define port_switch(ntp, otp) { \
diff --git a/os/ports/common/ARMCMx/CMSIS/include/arm_common_tables.h b/os/ports/common/ARMCMx/CMSIS/include/arm_common_tables.h new file mode 100644 index 000000000..34f910f9b --- /dev/null +++ b/os/ports/common/ARMCMx/CMSIS/include/arm_common_tables.h @@ -0,0 +1,35 @@ +/* ----------------------------------------------------------------------
+* Copyright (C) 2010 ARM Limited. All rights reserved.
+*
+* $Date: 11. November 2010
+* $Revision: V1.0.2
+*
+* Project: CMSIS DSP Library
+* Title: arm_common_tables.h
+*
+* Description: This file has extern declaration for common tables like Bitreverse, reciprocal etc which are used across different functions
+*
+* Target Processor: Cortex-M4/Cortex-M3
+*
+* Version 1.0.2 2010/11/11
+* Documentation updated.
+*
+* Version 1.0.1 2010/10/05
+* Production release and review comments incorporated.
+*
+* Version 1.0.0 2010/09/20
+* Production release and review comments incorporated.
+* -------------------------------------------------------------------- */
+
+#ifndef _ARM_COMMON_TABLES_H
+#define _ARM_COMMON_TABLES_H
+
+#include "arm_math.h"
+
+extern uint16_t armBitRevTable[256];
+extern q15_t armRecipTableQ15[64];
+extern q31_t armRecipTableQ31[64];
+extern const q31_t realCoefAQ31[1024];
+extern const q31_t realCoefBQ31[1024];
+
+#endif /* ARM_COMMON_TABLES_H */
diff --git a/os/ports/common/ARMCMx/CMSIS/include/arm_math.h b/os/ports/common/ARMCMx/CMSIS/include/arm_math.h new file mode 100644 index 000000000..d8901db15 --- /dev/null +++ b/os/ports/common/ARMCMx/CMSIS/include/arm_math.h @@ -0,0 +1,7051 @@ +/* ----------------------------------------------------------------------
+ * Copyright (C) 2010 ARM Limited. All rights reserved.
+ *
+ * $Date: 15. July 2011
+ * $Revision: V1.0.10
+ *
+ * Project: CMSIS DSP Library
+ * Title: arm_math.h
+ *
+ * Description: Public header file for CMSIS DSP Library
+ *
+ * Target Processor: Cortex-M4/Cortex-M3/Cortex-M0
+ *
+ * Version 1.0.10 2011/7/15
+ * Big Endian support added and Merged M0 and M3/M4 Source code.
+ *
+ * Version 1.0.3 2010/11/29
+ * Re-organized the CMSIS folders and updated documentation.
+ *
+ * Version 1.0.2 2010/11/11
+ * Documentation updated.
+ *
+ * Version 1.0.1 2010/10/05
+ * Production release and review comments incorporated.
+ *
+ * Version 1.0.0 2010/09/20
+ * Production release and review comments incorporated.
+ * -------------------------------------------------------------------- */
+
+/**
+ \mainpage CMSIS DSP Software Library
+ *
+ * <b>Introduction</b>
+ *
+ * This user manual describes the CMSIS DSP software library,
+ * a suite of common signal processing functions for use on Cortex-M processor based devices.
+ *
+ * The library is divided into a number of modules each covering a specific category:
+ * - Basic math functions
+ * - Fast math functions
+ * - Complex math functions
+ * - Filters
+ * - Matrix functions
+ * - Transforms
+ * - Motor control functions
+ * - Statistical functions
+ * - Support functions
+ * - Interpolation functions
+ *
+ * The library has separate functions for operating on 8-bit integers, 16-bit integers,
+ * 32-bit integer and 32-bit floating-point values.
+ *
+ * <b>Processor Support</b>
+ *
+ * The library is completely written in C and is fully CMSIS compliant.
+ * High performance is achieved through maximum use of Cortex-M4 intrinsics.
+ *
+ * The supplied library source code also builds and runs on the Cortex-M3 and Cortex-M0 processor,
+ * with the DSP intrinsics being emulated through software.
+ *
+ *
+ * <b>Toolchain Support</b>
+ *
+ * The library has been developed and tested with MDK-ARM version 4.21.
+ * The library is being tested in GCC and IAR toolchains and updates on this activity will be made available shortly.
+ *
+ * <b>Using the Library</b>
+ *
+ * The library installer contains prebuilt versions of the libraries in the <code>Lib</code> folder.
+ * - arm_cortexM4lf_math.lib (Little endian and Floating Point Unit on Cortex-M4)
+ * - arm_cortexM4bf_math.lib (Big endian and Floating Point Unit on Cortex-M4)
+ * - arm_cortexM4l_math.lib (Little endian on Cortex-M4)
+ * - arm_cortexM4b_math.lib (Big endian on Cortex-M4)
+ * - arm_cortexM3l_math.lib (Little endian on Cortex-M3)
+ * - arm_cortexM3b_math.lib (Big endian on Cortex-M3)
+ * - arm_cortexM0l_math.lib (Little endian on Cortex-M0)
+ * - arm_cortexM0b_math.lib (Big endian on Cortex-M3)
+ *
+ * The library functions are declared in the public file <code>arm_math.h</code> which is placed in the <code>Include</code> folder.
+ * Simply include this file and link the appropriate library in the application and begin calling the library functions. The Library supports single
+ * public header file <code> arm_math.h</code> for Cortex-M4/M3/M0 with little endian and big endian. Same header file will be used for floating point unit(FPU) variants.
+ * Define the appropriate pre processor MACRO ARM_MATH_CM4 or ARM_MATH_CM3 or
+ * ARM_MATH_CM0 depending on the target processor in the application.
+ *
+ * <b>Examples</b>
+ *
+ * The library ships with a number of examples which demonstrate how to use the library functions.
+ *
+ * <b>Building the Library</b>
+ *
+ * The library installer contains project files to re build libraries on MDK Tool chain in the <code>CMSIS\DSP_Lib\Source\ARM</code> folder.
+ * - arm_cortexM0b_math.uvproj
+ * - arm_cortexM0l_math.uvproj
+ * - arm_cortexM3b_math.uvproj
+ * - arm_cortexM3l_math.uvproj
+ * - arm_cortexM4b_math.uvproj
+ * - arm_cortexM4l_math.uvproj
+ * - arm_cortexM4bf_math.uvproj
+ * - arm_cortexM4lf_math.uvproj
+ *
+ * Each library project have differant pre-processor macros.
+ *
+ * <b>ARM_MATH_CMx:</b>
+ * Define macro ARM_MATH_CM4 for building the library on Cortex-M4 target, ARM_MATH_CM3 for building library on Cortex-M3 target
+ * and ARM_MATH_CM0 for building library on cortex-M0 target.
+ *
+ * <b>ARM_MATH_BIG_ENDIAN:</b>
+ * Define macro ARM_MATH_BIG_ENDIAN to build the library for big endian targets. By default library builds for little endian targets.
+ *
+ * <b>ARM_MATH_MATRIX_CHECK:</b>
+ * Define macro for checking on the input and output sizes of matrices
+ *
+ * <b>ARM_MATH_ROUNDING:</b>
+ * Define macro for rounding on support functions
+ *
+ * <b>__FPU_PRESENT:</b>
+ * Initialize macro __FPU_PRESENT = 1 when building on FPU supported Targets. Enable this macro for M4bf and M4lf libraries
+ *
+ *
+ * The project can be built by opening the appropriate project in MDK-ARM 4.21 chain and defining the optional pre processor MACROs detailed above.
+ *
+ * <b>Copyright Notice</b>
+ *
+ * Copyright (C) 2010 ARM Limited. All rights reserved.
+ */
+
+
+/**
+ * @defgroup groupMath Basic Math Functions
+ */
+
+/**
+ * @defgroup groupFastMath Fast Math Functions
+ * This set of functions provides a fast approximation to sine, cosine, and square root.
+ * As compared to most of the other functions in the CMSIS math library, the fast math functions
+ * operate on individual values and not arrays.
+ * There are separate functions for Q15, Q31, and floating-point data.
+ *
+ */
+
+/**
+ * @defgroup groupCmplxMath Complex Math Functions
+ * This set of functions operates on complex data vectors.
+ * The data in the complex arrays is stored in an interleaved fashion
+ * (real, imag, real, imag, ...).
+ * In the API functions, the number of samples in a complex array refers
+ * to the number of complex values; the array contains twice this number of
+ * real values.
+ */
+
+/**
+ * @defgroup groupFilters Filtering Functions
+ */
+
+/**
+ * @defgroup groupMatrix Matrix Functions
+ *
+ * This set of functions provides basic matrix math operations.
+ * The functions operate on matrix data structures. For example,
+ * the type
+ * definition for the floating-point matrix structure is shown
+ * below:
+ * <pre>
+ * typedef struct
+ * {
+ * uint16_t numRows; // number of rows of the matrix.
+ * uint16_t numCols; // number of columns of the matrix.
+ * float32_t *pData; // points to the data of the matrix.
+ * } arm_matrix_instance_f32;
+ * </pre>
+ * There are similar definitions for Q15 and Q31 data types.
+ *
+ * The structure specifies the size of the matrix and then points to
+ * an array of data. The array is of size <code>numRows X numCols</code>
+ * and the values are arranged in row order. That is, the
+ * matrix element (i, j) is stored at:
+ * <pre>
+ * pData[i*numCols + j]
+ * </pre>
+ *
+ * \par Init Functions
+ * There is an associated initialization function for each type of matrix
+ * data structure.
+ * The initialization function sets the values of the internal structure fields.
+ * Refer to the function <code>arm_mat_init_f32()</code>, <code>arm_mat_init_q31()</code>
+ * and <code>arm_mat_init_q15()</code> for floating-point, Q31 and Q15 types, respectively.
+ *
+ * \par
+ * Use of the initialization function is optional. However, if initialization function is used
+ * then the instance structure cannot be placed into a const data section.
+ * To place the instance structure in a const data
+ * section, manually initialize the data structure. For example:
+ * <pre>
+ * <code>arm_matrix_instance_f32 S = {nRows, nColumns, pData};</code>
+ * <code>arm_matrix_instance_q31 S = {nRows, nColumns, pData};</code>
+ * <code>arm_matrix_instance_q15 S = {nRows, nColumns, pData};</code>
+ * </pre>
+ * where <code>nRows</code> specifies the number of rows, <code>nColumns</code>
+ * specifies the number of columns, and <code>pData</code> points to the
+ * data array.
+ *
+ * \par Size Checking
+ * By default all of the matrix functions perform size checking on the input and
+ * output matrices. For example, the matrix addition function verifies that the
+ * two input matrices and the output matrix all have the same number of rows and
+ * columns. If the size check fails the functions return:
+ * <pre>
+ * ARM_MATH_SIZE_MISMATCH
+ * </pre>
+ * Otherwise the functions return
+ * <pre>
+ * ARM_MATH_SUCCESS
+ * </pre>
+ * There is some overhead associated with this matrix size checking.
+ * The matrix size checking is enabled via the #define
+ * <pre>
+ * ARM_MATH_MATRIX_CHECK
+ * </pre>
+ * within the library project settings. By default this macro is defined
+ * and size checking is enabled. By changing the project settings and
+ * undefining this macro size checking is eliminated and the functions
+ * run a bit faster. With size checking disabled the functions always
+ * return <code>ARM_MATH_SUCCESS</code>.
+ */
+
+/**
+ * @defgroup groupTransforms Transform Functions
+ */
+
+/**
+ * @defgroup groupController Controller Functions
+ */
+
+/**
+ * @defgroup groupStats Statistics Functions
+ */
+/**
+ * @defgroup groupSupport Support Functions
+ */
+
+/**
+ * @defgroup groupInterpolation Interpolation Functions
+ * These functions perform 1- and 2-dimensional interpolation of data.
+ * Linear interpolation is used for 1-dimensional data and
+ * bilinear interpolation is used for 2-dimensional data.
+ */
+
+/**
+ * @defgroup groupExamples Examples
+ */
+#ifndef _ARM_MATH_H
+#define _ARM_MATH_H
+
+#define __CMSIS_GENERIC /* disable NVIC and Systick functions */
+
+#if defined (ARM_MATH_CM4)
+ #include "core_cm4.h"
+#elif defined (ARM_MATH_CM3)
+ #include "core_cm3.h"
+#elif defined (ARM_MATH_CM0)
+ #include "core_cm0.h"
+#else
+#include "ARMCM4.h"
+#warning "Define either ARM_MATH_CM4 OR ARM_MATH_CM3...By Default building on ARM_MATH_CM4....."
+#endif
+
+#undef __CMSIS_GENERIC /* enable NVIC and Systick functions */
+#include "string.h"
+ #include "math.h"
+#ifdef __cplusplus
+extern "C"
+{
+#endif
+
+
+ /**
+ * @brief Macros required for reciprocal calculation in Normalized LMS
+ */
+
+#define DELTA_Q31 (0x100)
+#define DELTA_Q15 0x5
+#define INDEX_MASK 0x0000003F
+#define PI 3.14159265358979f
+
+ /**
+ * @brief Macros required for SINE and COSINE Fast math approximations
+ */
+
+#define TABLE_SIZE 256
+#define TABLE_SPACING_Q31 0x800000
+#define TABLE_SPACING_Q15 0x80
+
+ /**
+ * @brief Macros required for SINE and COSINE Controller functions
+ */
+ /* 1.31(q31) Fixed value of 2/360 */
+ /* -1 to +1 is divided into 360 values so total spacing is (2/360) */
+#define INPUT_SPACING 0xB60B61
+
+
+ /**
+ * @brief Error status returned by some functions in the library.
+ */
+
+ typedef enum
+ {
+ ARM_MATH_SUCCESS = 0, /**< No error */
+ ARM_MATH_ARGUMENT_ERROR = -1, /**< One or more arguments are incorrect */
+ ARM_MATH_LENGTH_ERROR = -2, /**< Length of data buffer is incorrect */
+ ARM_MATH_SIZE_MISMATCH = -3, /**< Size of matrices is not compatible with the operation. */
+ ARM_MATH_NANINF = -4, /**< Not-a-number (NaN) or infinity is generated */
+ ARM_MATH_SINGULAR = -5, /**< Generated by matrix inversion if the input matrix is singular and cannot be inverted. */
+ ARM_MATH_TEST_FAILURE = -6 /**< Test Failed */
+ } arm_status;
+
+ /**
+ * @brief 8-bit fractional data type in 1.7 format.
+ */
+ typedef int8_t q7_t;
+
+ /**
+ * @brief 16-bit fractional data type in 1.15 format.
+ */
+ typedef int16_t q15_t;
+
+ /**
+ * @brief 32-bit fractional data type in 1.31 format.
+ */
+ typedef int32_t q31_t;
+
+ /**
+ * @brief 64-bit fractional data type in 1.63 format.
+ */
+ typedef int64_t q63_t;
+
+ /**
+ * @brief 32-bit floating-point type definition.
+ */
+ typedef float float32_t;
+
+ /**
+ * @brief 64-bit floating-point type definition.
+ */
+ typedef double float64_t;
+
+ /**
+ * @brief definition to read/write two 16 bit values.
+ */
+#define __SIMD32(addr) (*(int32_t **) & (addr))
+
+#if defined (ARM_MATH_CM3) || defined (ARM_MATH_CM0)
+ /**
+ * @brief definition to pack two 16 bit values.
+ */
+#define __PKHBT(ARG1, ARG2, ARG3) ( (((int32_t)(ARG1) << 0) & (int32_t)0x0000FFFF) | \
+ (((int32_t)(ARG2) << ARG3) & (int32_t)0xFFFF0000) )
+
+#endif
+
+
+ /**
+ * @brief definition to pack four 8 bit values.
+ */
+#ifndef ARM_MATH_BIG_ENDIAN
+
+#define __PACKq7(v0,v1,v2,v3) ( (((int32_t)(v0) << 0) & (int32_t)0x000000FF) | \
+ (((int32_t)(v1) << 8) & (int32_t)0x0000FF00) | \
+ (((int32_t)(v2) << 16) & (int32_t)0x00FF0000) | \
+ (((int32_t)(v3) << 24) & (int32_t)0xFF000000) )
+#else
+
+#define __PACKq7(v0,v1,v2,v3) ( (((int32_t)(v3) << 0) & (int32_t)0x000000FF) | \
+ (((int32_t)(v2) << 8) & (int32_t)0x0000FF00) | \
+ (((int32_t)(v1) << 16) & (int32_t)0x00FF0000) | \
+ (((int32_t)(v0) << 24) & (int32_t)0xFF000000) )
+
+#endif
+
+
+ /**
+ * @brief Clips Q63 to Q31 values.
+ */
+ static __INLINE q31_t clip_q63_to_q31(
+ q63_t x)
+ {
+ return ((q31_t) (x >> 32) != ((q31_t) x >> 31)) ?
+ ((0x7FFFFFFF ^ ((q31_t) (x >> 63)))) : (q31_t) x;
+ }
+
+ /**
+ * @brief Clips Q63 to Q15 values.
+ */
+ static __INLINE q15_t clip_q63_to_q15(
+ q63_t x)
+ {
+ return ((q31_t) (x >> 32) != ((q31_t) x >> 31)) ?
+ ((0x7FFF ^ ((q15_t) (x >> 63)))) : (q15_t) (x >> 15);
+ }
+
+ /**
+ * @brief Clips Q31 to Q7 values.
+ */
+ static __INLINE q7_t clip_q31_to_q7(
+ q31_t x)
+ {
+ return ((q31_t) (x >> 24) != ((q31_t) x >> 23)) ?
+ ((0x7F ^ ((q7_t) (x >> 31)))) : (q7_t) x;
+ }
+
+ /**
+ * @brief Clips Q31 to Q15 values.
+ */
+ static __INLINE q15_t clip_q31_to_q15(
+ q31_t x)
+ {
+ return ((q31_t) (x >> 16) != ((q31_t) x >> 15)) ?
+ ((0x7FFF ^ ((q15_t) (x >> 31)))) : (q15_t) x;
+ }
+
+ /**
+ * @brief Multiplies 32 X 64 and returns 32 bit result in 2.30 format.
+ */
+
+ static __INLINE q63_t mult32x64(
+ q63_t x,
+ q31_t y)
+ {
+ return ((((q63_t) (x & 0x00000000FFFFFFFF) * y) >> 32) +
+ (((q63_t) (x >> 32) * y)));
+ }
+
+
+#if defined (ARM_MATH_CM0) && defined ( __CC_ARM )
+#define __CLZ __clz
+#endif
+
+#if defined (ARM_MATH_CM0) && ((defined (__ICCARM__)) ||(defined (__GNUC__)) || defined (__TASKING__) )
+
+ static __INLINE uint32_t __CLZ(q31_t data);
+
+
+ static __INLINE uint32_t __CLZ(q31_t data)
+ {
+ uint32_t count = 0;
+ uint32_t mask = 0x80000000;
+
+ while((data & mask) == 0)
+ {
+ count += 1u;
+ mask = mask >> 1u;
+ }
+
+ return(count);
+
+ }
+
+#endif
+
+ /**
+ * @brief Function to Calculates 1/in(reciprocal) value of Q31 Data type.
+ */
+
+ static __INLINE uint32_t arm_recip_q31(
+ q31_t in,
+ q31_t * dst,
+ q31_t * pRecipTable)
+ {
+
+ uint32_t out, tempVal;
+ uint32_t index, i;
+ uint32_t signBits;
+
+ if(in > 0)
+ {
+ signBits = __CLZ(in) - 1;
+ }
+ else
+ {
+ signBits = __CLZ(-in) - 1;
+ }
+
+ /* Convert input sample to 1.31 format */
+ in = in << signBits;
+
+ /* calculation of index for initial approximated Val */
+ index = (uint32_t) (in >> 24u);
+ index = (index & INDEX_MASK);
+
+ /* 1.31 with exp 1 */
+ out = pRecipTable[index];
+
+ /* calculation of reciprocal value */
+ /* running approximation for two iterations */
+ for (i = 0u; i < 2u; i++)
+ {
+ tempVal = (q31_t) (((q63_t) in * out) >> 31u);
+ tempVal = 0x7FFFFFFF - tempVal;
+ /* 1.31 with exp 1 */
+ //out = (q31_t) (((q63_t) out * tempVal) >> 30u);
+ out = (q31_t) clip_q63_to_q31(((q63_t) out * tempVal) >> 30u);
+ }
+
+ /* write output */
+ *dst = out;
+
+ /* return num of signbits of out = 1/in value */
+ return (signBits + 1u);
+
+ }
+
+ /**
+ * @brief Function to Calculates 1/in(reciprocal) value of Q15 Data type.
+ */
+ static __INLINE uint32_t arm_recip_q15(
+ q15_t in,
+ q15_t * dst,
+ q15_t * pRecipTable)
+ {
+
+ uint32_t out = 0, tempVal = 0;
+ uint32_t index = 0, i = 0;
+ uint32_t signBits = 0;
+
+ if(in > 0)
+ {
+ signBits = __CLZ(in) - 17;
+ }
+ else
+ {
+ signBits = __CLZ(-in) - 17;
+ }
+
+ /* Convert input sample to 1.15 format */
+ in = in << signBits;
+
+ /* calculation of index for initial approximated Val */
+ index = in >> 8;
+ index = (index & INDEX_MASK);
+
+ /* 1.15 with exp 1 */
+ out = pRecipTable[index];
+
+ /* calculation of reciprocal value */
+ /* running approximation for two iterations */
+ for (i = 0; i < 2; i++)
+ {
+ tempVal = (q15_t) (((q31_t) in * out) >> 15);
+ tempVal = 0x7FFF - tempVal;
+ /* 1.15 with exp 1 */
+ out = (q15_t) (((q31_t) out * tempVal) >> 14);
+ }
+
+ /* write output */
+ *dst = out;
+
+ /* return num of signbits of out = 1/in value */
+ return (signBits + 1);
+
+ }
+
+
+ /*
+ * @brief C custom defined intrinisic function for only M0 processors
+ */
+#if defined(ARM_MATH_CM0)
+
+ static __INLINE q31_t __SSAT(
+ q31_t x,
+ uint32_t y)
+ {
+ int32_t posMax, negMin;
+ uint32_t i;
+
+ posMax = 1;
+ for (i = 0; i < (y - 1); i++)
+ {
+ posMax = posMax * 2;
+ }
+
+ if(x > 0)
+ {
+ posMax = (posMax - 1);
+
+ if(x > posMax)
+ {
+ x = posMax;
+ }
+ }
+ else
+ {
+ negMin = -posMax;
+
+ if(x < negMin)
+ {
+ x = negMin;
+ }
+ }
+ return (x);
+
+
+ }
+
+#endif /* end of ARM_MATH_CM0 */
+
+
+
+ /*
+ * @brief C custom defined intrinsic function for M3 and M0 processors
+ */
+#if defined (ARM_MATH_CM3) || defined (ARM_MATH_CM0)
+
+ /*
+ * @brief C custom defined QADD8 for M3 and M0 processors
+ */
+ static __INLINE q31_t __QADD8(
+ q31_t x,
+ q31_t y)
+ {
+
+ q31_t sum;
+ q7_t r, s, t, u;
+
+ r = (char) x;
+ s = (char) y;
+
+ r = __SSAT((q31_t) (r + s), 8);
+ s = __SSAT(((q31_t) (((x << 16) >> 24) + ((y << 16) >> 24))), 8);
+ t = __SSAT(((q31_t) (((x << 8) >> 24) + ((y << 8) >> 24))), 8);
+ u = __SSAT(((q31_t) ((x >> 24) + (y >> 24))), 8);
+
+ sum = (((q31_t) u << 24) & 0xFF000000) | (((q31_t) t << 16) & 0x00FF0000) |
+ (((q31_t) s << 8) & 0x0000FF00) | (r & 0x000000FF);
+
+ return sum;
+
+ }
+
+ /*
+ * @brief C custom defined QSUB8 for M3 and M0 processors
+ */
+ static __INLINE q31_t __QSUB8(
+ q31_t x,
+ q31_t y)
+ {
+
+ q31_t sum;
+ q31_t r, s, t, u;
+
+ r = (char) x;
+ s = (char) y;
+
+ r = __SSAT((r - s), 8);
+ s = __SSAT(((q31_t) (((x << 16) >> 24) - ((y << 16) >> 24))), 8) << 8;
+ t = __SSAT(((q31_t) (((x << 8) >> 24) - ((y << 8) >> 24))), 8) << 16;
+ u = __SSAT(((q31_t) ((x >> 24) - (y >> 24))), 8) << 24;
+
+ sum =
+ (u & 0xFF000000) | (t & 0x00FF0000) | (s & 0x0000FF00) | (r & 0x000000FF);
+
+ return sum;
+ }
+
+ /*
+ * @brief C custom defined QADD16 for M3 and M0 processors
+ */
+
+ /*
+ * @brief C custom defined QADD16 for M3 and M0 processors
+ */
+ static __INLINE q31_t __QADD16(
+ q31_t x,
+ q31_t y)
+ {
+
+ q31_t sum;
+ q31_t r, s;
+
+ r = (short) x;
+ s = (short) y;
+
+ r = __SSAT(r + s, 16);
+ s = __SSAT(((q31_t) ((x >> 16) + (y >> 16))), 16) << 16;
+
+ sum = (s & 0xFFFF0000) | (r & 0x0000FFFF);
+
+ return sum;
+
+ }
+
+ /*
+ * @brief C custom defined SHADD16 for M3 and M0 processors
+ */
+ static __INLINE q31_t __SHADD16(
+ q31_t x,
+ q31_t y)
+ {
+
+ q31_t sum;
+ q31_t r, s;
+
+ r = (short) x;
+ s = (short) y;
+
+ r = ((r >> 1) + (s >> 1));
+ s = ((q31_t) ((x >> 17) + (y >> 17))) << 16;
+
+ sum = (s & 0xFFFF0000) | (r & 0x0000FFFF);
+
+ return sum;
+
+ }
+
+ /*
+ * @brief C custom defined QSUB16 for M3 and M0 processors
+ */
+ static __INLINE q31_t __QSUB16(
+ q31_t x,
+ q31_t y)
+ {
+
+ q31_t sum;
+ q31_t r, s;
+
+ r = (short) x;
+ s = (short) y;
+
+ r = __SSAT(r - s, 16);
+ s = __SSAT(((q31_t) ((x >> 16) - (y >> 16))), 16) << 16;
+
+ sum = (s & 0xFFFF0000) | (r & 0x0000FFFF);
+
+ return sum;
+ }
+
+ /*
+ * @brief C custom defined SHSUB16 for M3 and M0 processors
+ */
+ static __INLINE q31_t __SHSUB16(
+ q31_t x,
+ q31_t y)
+ {
+
+ q31_t diff;
+ q31_t r, s;
+
+ r = (short) x;
+ s = (short) y;
+
+ r = ((r >> 1) - (s >> 1));
+ s = (((x >> 17) - (y >> 17)) << 16);
+
+ diff = (s & 0xFFFF0000) | (r & 0x0000FFFF);
+
+ return diff;
+ }
+
+ /*
+ * @brief C custom defined QASX for M3 and M0 processors
+ */
+ static __INLINE q31_t __QASX(
+ q31_t x,
+ q31_t y)
+ {
+
+ q31_t sum = 0;
+
+ sum = ((sum + clip_q31_to_q15((q31_t) ((short) (x >> 16) + (short) y))) << 16) +
+ clip_q31_to_q15((q31_t) ((short) x - (short) (y >> 16)));
+
+ return sum;
+ }
+
+ /*
+ * @brief C custom defined SHASX for M3 and M0 processors
+ */
+ static __INLINE q31_t __SHASX(
+ q31_t x,
+ q31_t y)
+ {
+
+ q31_t sum;
+ q31_t r, s;
+
+ r = (short) x;
+ s = (short) y;
+
+ r = ((r >> 1) - (y >> 17));
+ s = (((x >> 17) + (s >> 1)) << 16);
+
+ sum = (s & 0xFFFF0000) | (r & 0x0000FFFF);
+
+ return sum;
+ }
+
+
+ /*
+ * @brief C custom defined QSAX for M3 and M0 processors
+ */
+ static __INLINE q31_t __QSAX(
+ q31_t x,
+ q31_t y)
+ {
+
+ q31_t sum = 0;
+
+ sum = ((sum + clip_q31_to_q15((q31_t) ((short) (x >> 16) - (short) y))) << 16) +
+ clip_q31_to_q15((q31_t) ((short) x + (short) (y >> 16)));
+
+ return sum;
+ }
+
+ /*
+ * @brief C custom defined SHSAX for M3 and M0 processors
+ */
+ static __INLINE q31_t __SHSAX(
+ q31_t x,
+ q31_t y)
+ {
+
+ q31_t sum;
+ q31_t r, s;
+
+ r = (short) x;
+ s = (short) y;
+
+ r = ((r >> 1) + (y >> 17));
+ s = (((x >> 17) - (s >> 1)) << 16);
+
+ sum = (s & 0xFFFF0000) | (r & 0x0000FFFF);
+
+ return sum;
+ }
+
+ /*
+ * @brief C custom defined SMUSDX for M3 and M0 processors
+ */
+ static __INLINE q31_t __SMUSDX(
+ q31_t x,
+ q31_t y)
+ {
+
+ return ((q31_t)(((short) x * (short) (y >> 16)) -
+ ((short) (x >> 16) * (short) y)));
+ }
+
+ /*
+ * @brief C custom defined SMUADX for M3 and M0 processors
+ */
+ static __INLINE q31_t __SMUADX(
+ q31_t x,
+ q31_t y)
+ {
+
+ return ((q31_t)(((short) x * (short) (y >> 16)) +
+ ((short) (x >> 16) * (short) y)));
+ }
+
+ /*
+ * @brief C custom defined QADD for M3 and M0 processors
+ */
+ static __INLINE q31_t __QADD(
+ q31_t x,
+ q31_t y)
+ {
+ return clip_q63_to_q31((q63_t) x + y);
+ }
+
+ /*
+ * @brief C custom defined QSUB for M3 and M0 processors
+ */
+ static __INLINE q31_t __QSUB(
+ q31_t x,
+ q31_t y)
+ {
+ return clip_q63_to_q31((q63_t) x - y);
+ }
+
+ /*
+ * @brief C custom defined SMLAD for M3 and M0 processors
+ */
+ static __INLINE q31_t __SMLAD(
+ q31_t x,
+ q31_t y,
+ q31_t sum)
+ {
+
+ return (sum + ((short) (x >> 16) * (short) (y >> 16)) +
+ ((short) x * (short) y));
+ }
+
+ /*
+ * @brief C custom defined SMLADX for M3 and M0 processors
+ */
+ static __INLINE q31_t __SMLADX(
+ q31_t x,
+ q31_t y,
+ q31_t sum)
+ {
+
+ return (sum + ((short) (x >> 16) * (short) (y)) +
+ ((short) x * (short) (y >> 16)));
+ }
+
+ /*
+ * @brief C custom defined SMLSDX for M3 and M0 processors
+ */
+ static __INLINE q31_t __SMLSDX(
+ q31_t x,
+ q31_t y,
+ q31_t sum)
+ {
+
+ return (sum - ((short) (x >> 16) * (short) (y)) +
+ ((short) x * (short) (y >> 16)));
+ }
+
+ /*
+ * @brief C custom defined SMLALD for M3 and M0 processors
+ */
+ static __INLINE q63_t __SMLALD(
+ q31_t x,
+ q31_t y,
+ q63_t sum)
+ {
+
+ return (sum + ((short) (x >> 16) * (short) (y >> 16)) +
+ ((short) x * (short) y));
+ }
+
+ /*
+ * @brief C custom defined SMLALDX for M3 and M0 processors
+ */
+ static __INLINE q63_t __SMLALDX(
+ q31_t x,
+ q31_t y,
+ q63_t sum)
+ {
+
+ return (sum + ((short) (x >> 16) * (short) y)) +
+ ((short) x * (short) (y >> 16));
+ }
+
+ /*
+ * @brief C custom defined SMUAD for M3 and M0 processors
+ */
+ static __INLINE q31_t __SMUAD(
+ q31_t x,
+ q31_t y)
+ {
+
+ return (((x >> 16) * (y >> 16)) +
+ (((x << 16) >> 16) * ((y << 16) >> 16)));
+ }
+
+ /*
+ * @brief C custom defined SMUSD for M3 and M0 processors
+ */
+ static __INLINE q31_t __SMUSD(
+ q31_t x,
+ q31_t y)
+ {
+
+ return (-((x >> 16) * (y >> 16)) +
+ (((x << 16) >> 16) * ((y << 16) >> 16)));
+ }
+
+
+
+
+#endif /* (ARM_MATH_CM3) || defined (ARM_MATH_CM0) */
+
+
+ /**
+ * @brief Instance structure for the Q7 FIR filter.
+ */
+ typedef struct
+ {
+ uint16_t numTaps; /**< number of filter coefficients in the filter. */
+ q7_t *pState; /**< points to the state variable array. The array is of length numTaps+blockSize-1. */
+ q7_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps.*/
+ } arm_fir_instance_q7;
+
+ /**
+ * @brief Instance structure for the Q15 FIR filter.
+ */
+ typedef struct
+ {
+ uint16_t numTaps; /**< number of filter coefficients in the filter. */
+ q15_t *pState; /**< points to the state variable array. The array is of length numTaps+blockSize-1. */
+ q15_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps.*/
+ } arm_fir_instance_q15;
+
+ /**
+ * @brief Instance structure for the Q31 FIR filter.
+ */
+ typedef struct
+ {
+ uint16_t numTaps; /**< number of filter coefficients in the filter. */
+ q31_t *pState; /**< points to the state variable array. The array is of length numTaps+blockSize-1. */
+ q31_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps. */
+ } arm_fir_instance_q31;
+
+ /**
+ * @brief Instance structure for the floating-point FIR filter.
+ */
+ typedef struct
+ {
+ uint16_t numTaps; /**< number of filter coefficients in the filter. */
+ float32_t *pState; /**< points to the state variable array. The array is of length numTaps+blockSize-1. */
+ float32_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps. */
+ } arm_fir_instance_f32;
+
+
+ /**
+ * @brief Processing function for the Q7 FIR filter.
+ * @param[in] *S points to an instance of the Q7 FIR filter structure.
+ * @param[in] *pSrc points to the block of input data.
+ * @param[out] *pDst points to the block of output data.
+ * @param[in] blockSize number of samples to process.
+ * @return none.
+ */
+ void arm_fir_q7(
+ const arm_fir_instance_q7 * S,
+ q7_t * pSrc,
+ q7_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Initialization function for the Q7 FIR filter.
+ * @param[in,out] *S points to an instance of the Q7 FIR structure.
+ * @param[in] numTaps Number of filter coefficients in the filter.
+ * @param[in] *pCoeffs points to the filter coefficients.
+ * @param[in] *pState points to the state buffer.
+ * @param[in] blockSize number of samples that are processed.
+ * @return none
+ */
+ void arm_fir_init_q7(
+ arm_fir_instance_q7 * S,
+ uint16_t numTaps,
+ q7_t * pCoeffs,
+ q7_t * pState,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Processing function for the Q15 FIR filter.
+ * @param[in] *S points to an instance of the Q15 FIR structure.
+ * @param[in] *pSrc points to the block of input data.
+ * @param[out] *pDst points to the block of output data.
+ * @param[in] blockSize number of samples to process.
+ * @return none.
+ */
+ void arm_fir_q15(
+ const arm_fir_instance_q15 * S,
+ q15_t * pSrc,
+ q15_t * pDst,
+ uint32_t blockSize);
+
+ /**
+ * @brief Processing function for the fast Q15 FIR filter for Cortex-M3 and Cortex-M4.
+ * @param[in] *S points to an instance of the Q15 FIR filter structure.
+ * @param[in] *pSrc points to the block of input data.
+ * @param[out] *pDst points to the block of output data.
+ * @param[in] blockSize number of samples to process.
+ * @return none.
+ */
+ void arm_fir_fast_q15(
+ const arm_fir_instance_q15 * S,
+ q15_t * pSrc,
+ q15_t * pDst,
+ uint32_t blockSize);
+
+ /**
+ * @brief Initialization function for the Q15 FIR filter.
+ * @param[in,out] *S points to an instance of the Q15 FIR filter structure.
+ * @param[in] numTaps Number of filter coefficients in the filter. Must be even and greater than or equal to 4.
+ * @param[in] *pCoeffs points to the filter coefficients.
+ * @param[in] *pState points to the state buffer.
+ * @param[in] blockSize number of samples that are processed at a time.
+ * @return The function returns ARM_MATH_SUCCESS if initialization was successful or ARM_MATH_ARGUMENT_ERROR if
+ * <code>numTaps</code> is not a supported value.
+ */
+
+ arm_status arm_fir_init_q15(
+ arm_fir_instance_q15 * S,
+ uint16_t numTaps,
+ q15_t * pCoeffs,
+ q15_t * pState,
+ uint32_t blockSize);
+
+ /**
+ * @brief Processing function for the Q31 FIR filter.
+ * @param[in] *S points to an instance of the Q31 FIR filter structure.
+ * @param[in] *pSrc points to the block of input data.
+ * @param[out] *pDst points to the block of output data.
+ * @param[in] blockSize number of samples to process.
+ * @return none.
+ */
+ void arm_fir_q31(
+ const arm_fir_instance_q31 * S,
+ q31_t * pSrc,
+ q31_t * pDst,
+ uint32_t blockSize);
+
+ /**
+ * @brief Processing function for the fast Q31 FIR filter for Cortex-M3 and Cortex-M4.
+ * @param[in] *S points to an instance of the Q31 FIR structure.
+ * @param[in] *pSrc points to the block of input data.
+ * @param[out] *pDst points to the block of output data.
+ * @param[in] blockSize number of samples to process.
+ * @return none.
+ */
+ void arm_fir_fast_q31(
+ const arm_fir_instance_q31 * S,
+ q31_t * pSrc,
+ q31_t * pDst,
+ uint32_t blockSize);
+
+ /**
+ * @brief Initialization function for the Q31 FIR filter.
+ * @param[in,out] *S points to an instance of the Q31 FIR structure.
+ * @param[in] numTaps Number of filter coefficients in the filter.
+ * @param[in] *pCoeffs points to the filter coefficients.
+ * @param[in] *pState points to the state buffer.
+ * @param[in] blockSize number of samples that are processed at a time.
+ * @return none.
+ */
+ void arm_fir_init_q31(
+ arm_fir_instance_q31 * S,
+ uint16_t numTaps,
+ q31_t * pCoeffs,
+ q31_t * pState,
+ uint32_t blockSize);
+
+ /**
+ * @brief Processing function for the floating-point FIR filter.
+ * @param[in] *S points to an instance of the floating-point FIR structure.
+ * @param[in] *pSrc points to the block of input data.
+ * @param[out] *pDst points to the block of output data.
+ * @param[in] blockSize number of samples to process.
+ * @return none.
+ */
+ void arm_fir_f32(
+ const arm_fir_instance_f32 * S,
+ float32_t * pSrc,
+ float32_t * pDst,
+ uint32_t blockSize);
+
+ /**
+ * @brief Initialization function for the floating-point FIR filter.
+ * @param[in,out] *S points to an instance of the floating-point FIR filter structure.
+ * @param[in] numTaps Number of filter coefficients in the filter.
+ * @param[in] *pCoeffs points to the filter coefficients.
+ * @param[in] *pState points to the state buffer.
+ * @param[in] blockSize number of samples that are processed at a time.
+ * @return none.
+ */
+ void arm_fir_init_f32(
+ arm_fir_instance_f32 * S,
+ uint16_t numTaps,
+ float32_t * pCoeffs,
+ float32_t * pState,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Instance structure for the Q15 Biquad cascade filter.
+ */
+ typedef struct
+ {
+ int8_t numStages; /**< number of 2nd order stages in the filter. Overall order is 2*numStages. */
+ q15_t *pState; /**< Points to the array of state coefficients. The array is of length 4*numStages. */
+ q15_t *pCoeffs; /**< Points to the array of coefficients. The array is of length 5*numStages. */
+ int8_t postShift; /**< Additional shift, in bits, applied to each output sample. */
+
+ } arm_biquad_casd_df1_inst_q15;
+
+
+ /**
+ * @brief Instance structure for the Q31 Biquad cascade filter.
+ */
+ typedef struct
+ {
+ uint32_t numStages; /**< number of 2nd order stages in the filter. Overall order is 2*numStages. */
+ q31_t *pState; /**< Points to the array of state coefficients. The array is of length 4*numStages. */
+ q31_t *pCoeffs; /**< Points to the array of coefficients. The array is of length 5*numStages. */
+ uint8_t postShift; /**< Additional shift, in bits, applied to each output sample. */
+
+ } arm_biquad_casd_df1_inst_q31;
+
+ /**
+ * @brief Instance structure for the floating-point Biquad cascade filter.
+ */
+ typedef struct
+ {
+ uint32_t numStages; /**< number of 2nd order stages in the filter. Overall order is 2*numStages. */
+ float32_t *pState; /**< Points to the array of state coefficients. The array is of length 4*numStages. */
+ float32_t *pCoeffs; /**< Points to the array of coefficients. The array is of length 5*numStages. */
+
+
+ } arm_biquad_casd_df1_inst_f32;
+
+
+
+ /**
+ * @brief Processing function for the Q15 Biquad cascade filter.
+ * @param[in] *S points to an instance of the Q15 Biquad cascade structure.
+ * @param[in] *pSrc points to the block of input data.
+ * @param[out] *pDst points to the block of output data.
+ * @param[in] blockSize number of samples to process.
+ * @return none.
+ */
+
+ void arm_biquad_cascade_df1_q15(
+ const arm_biquad_casd_df1_inst_q15 * S,
+ q15_t * pSrc,
+ q15_t * pDst,
+ uint32_t blockSize);
+
+ /**
+ * @brief Initialization function for the Q15 Biquad cascade filter.
+ * @param[in,out] *S points to an instance of the Q15 Biquad cascade structure.
+ * @param[in] numStages number of 2nd order stages in the filter.
+ * @param[in] *pCoeffs points to the filter coefficients.
+ * @param[in] *pState points to the state buffer.
+ * @param[in] postShift Shift to be applied to the output. Varies according to the coefficients format
+ * @return none
+ */
+
+ void arm_biquad_cascade_df1_init_q15(
+ arm_biquad_casd_df1_inst_q15 * S,
+ uint8_t numStages,
+ q15_t * pCoeffs,
+ q15_t * pState,
+ int8_t postShift);
+
+
+ /**
+ * @brief Fast but less precise processing function for the Q15 Biquad cascade filter for Cortex-M3 and Cortex-M4.
+ * @param[in] *S points to an instance of the Q15 Biquad cascade structure.
+ * @param[in] *pSrc points to the block of input data.
+ * @param[out] *pDst points to the block of output data.
+ * @param[in] blockSize number of samples to process.
+ * @return none.
+ */
+
+ void arm_biquad_cascade_df1_fast_q15(
+ const arm_biquad_casd_df1_inst_q15 * S,
+ q15_t * pSrc,
+ q15_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Processing function for the Q31 Biquad cascade filter
+ * @param[in] *S points to an instance of the Q31 Biquad cascade structure.
+ * @param[in] *pSrc points to the block of input data.
+ * @param[out] *pDst points to the block of output data.
+ * @param[in] blockSize number of samples to process.
+ * @return none.
+ */
+
+ void arm_biquad_cascade_df1_q31(
+ const arm_biquad_casd_df1_inst_q31 * S,
+ q31_t * pSrc,
+ q31_t * pDst,
+ uint32_t blockSize);
+
+ /**
+ * @brief Fast but less precise processing function for the Q31 Biquad cascade filter for Cortex-M3 and Cortex-M4.
+ * @param[in] *S points to an instance of the Q31 Biquad cascade structure.
+ * @param[in] *pSrc points to the block of input data.
+ * @param[out] *pDst points to the block of output data.
+ * @param[in] blockSize number of samples to process.
+ * @return none.
+ */
+
+ void arm_biquad_cascade_df1_fast_q31(
+ const arm_biquad_casd_df1_inst_q31 * S,
+ q31_t * pSrc,
+ q31_t * pDst,
+ uint32_t blockSize);
+
+ /**
+ * @brief Initialization function for the Q31 Biquad cascade filter.
+ * @param[in,out] *S points to an instance of the Q31 Biquad cascade structure.
+ * @param[in] numStages number of 2nd order stages in the filter.
+ * @param[in] *pCoeffs points to the filter coefficients.
+ * @param[in] *pState points to the state buffer.
+ * @param[in] postShift Shift to be applied to the output. Varies according to the coefficients format
+ * @return none
+ */
+
+ void arm_biquad_cascade_df1_init_q31(
+ arm_biquad_casd_df1_inst_q31 * S,
+ uint8_t numStages,
+ q31_t * pCoeffs,
+ q31_t * pState,
+ int8_t postShift);
+
+ /**
+ * @brief Processing function for the floating-point Biquad cascade filter.
+ * @param[in] *S points to an instance of the floating-point Biquad cascade structure.
+ * @param[in] *pSrc points to the block of input data.
+ * @param[out] *pDst points to the block of output data.
+ * @param[in] blockSize number of samples to process.
+ * @return none.
+ */
+
+ void arm_biquad_cascade_df1_f32(
+ const arm_biquad_casd_df1_inst_f32 * S,
+ float32_t * pSrc,
+ float32_t * pDst,
+ uint32_t blockSize);
+
+ /**
+ * @brief Initialization function for the floating-point Biquad cascade filter.
+ * @param[in,out] *S points to an instance of the floating-point Biquad cascade structure.
+ * @param[in] numStages number of 2nd order stages in the filter.
+ * @param[in] *pCoeffs points to the filter coefficients.
+ * @param[in] *pState points to the state buffer.
+ * @return none
+ */
+
+ void arm_biquad_cascade_df1_init_f32(
+ arm_biquad_casd_df1_inst_f32 * S,
+ uint8_t numStages,
+ float32_t * pCoeffs,
+ float32_t * pState);
+
+
+ /**
+ * @brief Instance structure for the floating-point matrix structure.
+ */
+
+ typedef struct
+ {
+ uint16_t numRows; /**< number of rows of the matrix. */
+ uint16_t numCols; /**< number of columns of the matrix. */
+ float32_t *pData; /**< points to the data of the matrix. */
+ } arm_matrix_instance_f32;
+
+ /**
+ * @brief Instance structure for the Q15 matrix structure.
+ */
+
+ typedef struct
+ {
+ uint16_t numRows; /**< number of rows of the matrix. */
+ uint16_t numCols; /**< number of columns of the matrix. */
+ q15_t *pData; /**< points to the data of the matrix. */
+
+ } arm_matrix_instance_q15;
+
+ /**
+ * @brief Instance structure for the Q31 matrix structure.
+ */
+
+ typedef struct
+ {
+ uint16_t numRows; /**< number of rows of the matrix. */
+ uint16_t numCols; /**< number of columns of the matrix. */
+ q31_t *pData; /**< points to the data of the matrix. */
+
+ } arm_matrix_instance_q31;
+
+
+
+ /**
+ * @brief Floating-point matrix addition.
+ * @param[in] *pSrcA points to the first input matrix structure
+ * @param[in] *pSrcB points to the second input matrix structure
+ * @param[out] *pDst points to output matrix structure
+ * @return The function returns either
+ * <code>ARM_MATH_SIZE_MISMATCH</code> or <code>ARM_MATH_SUCCESS</code> based on the outcome of size checking.
+ */
+
+ arm_status arm_mat_add_f32(
+ const arm_matrix_instance_f32 * pSrcA,
+ const arm_matrix_instance_f32 * pSrcB,
+ arm_matrix_instance_f32 * pDst);
+
+ /**
+ * @brief Q15 matrix addition.
+ * @param[in] *pSrcA points to the first input matrix structure
+ * @param[in] *pSrcB points to the second input matrix structure
+ * @param[out] *pDst points to output matrix structure
+ * @return The function returns either
+ * <code>ARM_MATH_SIZE_MISMATCH</code> or <code>ARM_MATH_SUCCESS</code> based on the outcome of size checking.
+ */
+
+ arm_status arm_mat_add_q15(
+ const arm_matrix_instance_q15 * pSrcA,
+ const arm_matrix_instance_q15 * pSrcB,
+ arm_matrix_instance_q15 * pDst);
+
+ /**
+ * @brief Q31 matrix addition.
+ * @param[in] *pSrcA points to the first input matrix structure
+ * @param[in] *pSrcB points to the second input matrix structure
+ * @param[out] *pDst points to output matrix structure
+ * @return The function returns either
+ * <code>ARM_MATH_SIZE_MISMATCH</code> or <code>ARM_MATH_SUCCESS</code> based on the outcome of size checking.
+ */
+
+ arm_status arm_mat_add_q31(
+ const arm_matrix_instance_q31 * pSrcA,
+ const arm_matrix_instance_q31 * pSrcB,
+ arm_matrix_instance_q31 * pDst);
+
+
+ /**
+ * @brief Floating-point matrix transpose.
+ * @param[in] *pSrc points to the input matrix
+ * @param[out] *pDst points to the output matrix
+ * @return The function returns either <code>ARM_MATH_SIZE_MISMATCH</code>
+ * or <code>ARM_MATH_SUCCESS</code> based on the outcome of size checking.
+ */
+
+ arm_status arm_mat_trans_f32(
+ const arm_matrix_instance_f32 * pSrc,
+ arm_matrix_instance_f32 * pDst);
+
+
+ /**
+ * @brief Q15 matrix transpose.
+ * @param[in] *pSrc points to the input matrix
+ * @param[out] *pDst points to the output matrix
+ * @return The function returns either <code>ARM_MATH_SIZE_MISMATCH</code>
+ * or <code>ARM_MATH_SUCCESS</code> based on the outcome of size checking.
+ */
+
+ arm_status arm_mat_trans_q15(
+ const arm_matrix_instance_q15 * pSrc,
+ arm_matrix_instance_q15 * pDst);
+
+ /**
+ * @brief Q31 matrix transpose.
+ * @param[in] *pSrc points to the input matrix
+ * @param[out] *pDst points to the output matrix
+ * @return The function returns either <code>ARM_MATH_SIZE_MISMATCH</code>
+ * or <code>ARM_MATH_SUCCESS</code> based on the outcome of size checking.
+ */
+
+ arm_status arm_mat_trans_q31(
+ const arm_matrix_instance_q31 * pSrc,
+ arm_matrix_instance_q31 * pDst);
+
+
+ /**
+ * @brief Floating-point matrix multiplication
+ * @param[in] *pSrcA points to the first input matrix structure
+ * @param[in] *pSrcB points to the second input matrix structure
+ * @param[out] *pDst points to output matrix structure
+ * @return The function returns either
+ * <code>ARM_MATH_SIZE_MISMATCH</code> or <code>ARM_MATH_SUCCESS</code> based on the outcome of size checking.
+ */
+
+ arm_status arm_mat_mult_f32(
+ const arm_matrix_instance_f32 * pSrcA,
+ const arm_matrix_instance_f32 * pSrcB,
+ arm_matrix_instance_f32 * pDst);
+
+ /**
+ * @brief Q15 matrix multiplication
+ * @param[in] *pSrcA points to the first input matrix structure
+ * @param[in] *pSrcB points to the second input matrix structure
+ * @param[out] *pDst points to output matrix structure
+ * @return The function returns either
+ * <code>ARM_MATH_SIZE_MISMATCH</code> or <code>ARM_MATH_SUCCESS</code> based on the outcome of size checking.
+ */
+
+ arm_status arm_mat_mult_q15(
+ const arm_matrix_instance_q15 * pSrcA,
+ const arm_matrix_instance_q15 * pSrcB,
+ arm_matrix_instance_q15 * pDst,
+ q15_t * pState);
+
+ /**
+ * @brief Q15 matrix multiplication (fast variant) for Cortex-M3 and Cortex-M4
+ * @param[in] *pSrcA points to the first input matrix structure
+ * @param[in] *pSrcB points to the second input matrix structure
+ * @param[out] *pDst points to output matrix structure
+ * @param[in] *pState points to the array for storing intermediate results
+ * @return The function returns either
+ * <code>ARM_MATH_SIZE_MISMATCH</code> or <code>ARM_MATH_SUCCESS</code> based on the outcome of size checking.
+ */
+
+ arm_status arm_mat_mult_fast_q15(
+ const arm_matrix_instance_q15 * pSrcA,
+ const arm_matrix_instance_q15 * pSrcB,
+ arm_matrix_instance_q15 * pDst,
+ q15_t * pState);
+
+ /**
+ * @brief Q31 matrix multiplication
+ * @param[in] *pSrcA points to the first input matrix structure
+ * @param[in] *pSrcB points to the second input matrix structure
+ * @param[out] *pDst points to output matrix structure
+ * @return The function returns either
+ * <code>ARM_MATH_SIZE_MISMATCH</code> or <code>ARM_MATH_SUCCESS</code> based on the outcome of size checking.
+ */
+
+ arm_status arm_mat_mult_q31(
+ const arm_matrix_instance_q31 * pSrcA,
+ const arm_matrix_instance_q31 * pSrcB,
+ arm_matrix_instance_q31 * pDst);
+
+ /**
+ * @brief Q31 matrix multiplication (fast variant) for Cortex-M3 and Cortex-M4
+ * @param[in] *pSrcA points to the first input matrix structure
+ * @param[in] *pSrcB points to the second input matrix structure
+ * @param[out] *pDst points to output matrix structure
+ * @return The function returns either
+ * <code>ARM_MATH_SIZE_MISMATCH</code> or <code>ARM_MATH_SUCCESS</code> based on the outcome of size checking.
+ */
+
+ arm_status arm_mat_mult_fast_q31(
+ const arm_matrix_instance_q31 * pSrcA,
+ const arm_matrix_instance_q31 * pSrcB,
+ arm_matrix_instance_q31 * pDst);
+
+
+ /**
+ * @brief Floating-point matrix subtraction
+ * @param[in] *pSrcA points to the first input matrix structure
+ * @param[in] *pSrcB points to the second input matrix structure
+ * @param[out] *pDst points to output matrix structure
+ * @return The function returns either
+ * <code>ARM_MATH_SIZE_MISMATCH</code> or <code>ARM_MATH_SUCCESS</code> based on the outcome of size checking.
+ */
+
+ arm_status arm_mat_sub_f32(
+ const arm_matrix_instance_f32 * pSrcA,
+ const arm_matrix_instance_f32 * pSrcB,
+ arm_matrix_instance_f32 * pDst);
+
+ /**
+ * @brief Q15 matrix subtraction
+ * @param[in] *pSrcA points to the first input matrix structure
+ * @param[in] *pSrcB points to the second input matrix structure
+ * @param[out] *pDst points to output matrix structure
+ * @return The function returns either
+ * <code>ARM_MATH_SIZE_MISMATCH</code> or <code>ARM_MATH_SUCCESS</code> based on the outcome of size checking.
+ */
+
+ arm_status arm_mat_sub_q15(
+ const arm_matrix_instance_q15 * pSrcA,
+ const arm_matrix_instance_q15 * pSrcB,
+ arm_matrix_instance_q15 * pDst);
+
+ /**
+ * @brief Q31 matrix subtraction
+ * @param[in] *pSrcA points to the first input matrix structure
+ * @param[in] *pSrcB points to the second input matrix structure
+ * @param[out] *pDst points to output matrix structure
+ * @return The function returns either
+ * <code>ARM_MATH_SIZE_MISMATCH</code> or <code>ARM_MATH_SUCCESS</code> based on the outcome of size checking.
+ */
+
+ arm_status arm_mat_sub_q31(
+ const arm_matrix_instance_q31 * pSrcA,
+ const arm_matrix_instance_q31 * pSrcB,
+ arm_matrix_instance_q31 * pDst);
+
+ /**
+ * @brief Floating-point matrix scaling.
+ * @param[in] *pSrc points to the input matrix
+ * @param[in] scale scale factor
+ * @param[out] *pDst points to the output matrix
+ * @return The function returns either
+ * <code>ARM_MATH_SIZE_MISMATCH</code> or <code>ARM_MATH_SUCCESS</code> based on the outcome of size checking.
+ */
+
+ arm_status arm_mat_scale_f32(
+ const arm_matrix_instance_f32 * pSrc,
+ float32_t scale,
+ arm_matrix_instance_f32 * pDst);
+
+ /**
+ * @brief Q15 matrix scaling.
+ * @param[in] *pSrc points to input matrix
+ * @param[in] scaleFract fractional portion of the scale factor
+ * @param[in] shift number of bits to shift the result by
+ * @param[out] *pDst points to output matrix
+ * @return The function returns either
+ * <code>ARM_MATH_SIZE_MISMATCH</code> or <code>ARM_MATH_SUCCESS</code> based on the outcome of size checking.
+ */
+
+ arm_status arm_mat_scale_q15(
+ const arm_matrix_instance_q15 * pSrc,
+ q15_t scaleFract,
+ int32_t shift,
+ arm_matrix_instance_q15 * pDst);
+
+ /**
+ * @brief Q31 matrix scaling.
+ * @param[in] *pSrc points to input matrix
+ * @param[in] scaleFract fractional portion of the scale factor
+ * @param[in] shift number of bits to shift the result by
+ * @param[out] *pDst points to output matrix structure
+ * @return The function returns either
+ * <code>ARM_MATH_SIZE_MISMATCH</code> or <code>ARM_MATH_SUCCESS</code> based on the outcome of size checking.
+ */
+
+ arm_status arm_mat_scale_q31(
+ const arm_matrix_instance_q31 * pSrc,
+ q31_t scaleFract,
+ int32_t shift,
+ arm_matrix_instance_q31 * pDst);
+
+
+ /**
+ * @brief Q31 matrix initialization.
+ * @param[in,out] *S points to an instance of the floating-point matrix structure.
+ * @param[in] nRows number of rows in the matrix.
+ * @param[in] nColumns number of columns in the matrix.
+ * @param[in] *pData points to the matrix data array.
+ * @return none
+ */
+
+ void arm_mat_init_q31(
+ arm_matrix_instance_q31 * S,
+ uint16_t nRows,
+ uint16_t nColumns,
+ q31_t *pData);
+
+ /**
+ * @brief Q15 matrix initialization.
+ * @param[in,out] *S points to an instance of the floating-point matrix structure.
+ * @param[in] nRows number of rows in the matrix.
+ * @param[in] nColumns number of columns in the matrix.
+ * @param[in] *pData points to the matrix data array.
+ * @return none
+ */
+
+ void arm_mat_init_q15(
+ arm_matrix_instance_q15 * S,
+ uint16_t nRows,
+ uint16_t nColumns,
+ q15_t *pData);
+
+ /**
+ * @brief Floating-point matrix initialization.
+ * @param[in,out] *S points to an instance of the floating-point matrix structure.
+ * @param[in] nRows number of rows in the matrix.
+ * @param[in] nColumns number of columns in the matrix.
+ * @param[in] *pData points to the matrix data array.
+ * @return none
+ */
+
+ void arm_mat_init_f32(
+ arm_matrix_instance_f32 * S,
+ uint16_t nRows,
+ uint16_t nColumns,
+ float32_t *pData);
+
+
+
+ /**
+ * @brief Instance structure for the Q15 PID Control.
+ */
+ typedef struct
+ {
+ q15_t A0; /**< The derived gain, A0 = Kp + Ki + Kd . */
+ #ifdef ARM_MATH_CM0
+ q15_t A1;
+ q15_t A2;
+ #else
+ q31_t A1; /**< The derived gain A1 = -Kp - 2Kd | Kd.*/
+ #endif
+ q15_t state[3]; /**< The state array of length 3. */
+ q15_t Kp; /**< The proportional gain. */
+ q15_t Ki; /**< The integral gain. */
+ q15_t Kd; /**< The derivative gain. */
+ } arm_pid_instance_q15;
+
+ /**
+ * @brief Instance structure for the Q31 PID Control.
+ */
+ typedef struct
+ {
+ q31_t A0; /**< The derived gain, A0 = Kp + Ki + Kd . */
+ q31_t A1; /**< The derived gain, A1 = -Kp - 2Kd. */
+ q31_t A2; /**< The derived gain, A2 = Kd . */
+ q31_t state[3]; /**< The state array of length 3. */
+ q31_t Kp; /**< The proportional gain. */
+ q31_t Ki; /**< The integral gain. */
+ q31_t Kd; /**< The derivative gain. */
+
+ } arm_pid_instance_q31;
+
+ /**
+ * @brief Instance structure for the floating-point PID Control.
+ */
+ typedef struct
+ {
+ float32_t A0; /**< The derived gain, A0 = Kp + Ki + Kd . */
+ float32_t A1; /**< The derived gain, A1 = -Kp - 2Kd. */
+ float32_t A2; /**< The derived gain, A2 = Kd . */
+ float32_t state[3]; /**< The state array of length 3. */
+ float32_t Kp; /**< The proportional gain. */
+ float32_t Ki; /**< The integral gain. */
+ float32_t Kd; /**< The derivative gain. */
+ } arm_pid_instance_f32;
+
+
+
+ /**
+ * @brief Initialization function for the floating-point PID Control.
+ * @param[in,out] *S points to an instance of the PID structure.
+ * @param[in] resetStateFlag flag to reset the state. 0 = no change in state 1 = reset the state.
+ * @return none.
+ */
+ void arm_pid_init_f32(
+ arm_pid_instance_f32 * S,
+ int32_t resetStateFlag);
+
+ /**
+ * @brief Reset function for the floating-point PID Control.
+ * @param[in,out] *S is an instance of the floating-point PID Control structure
+ * @return none
+ */
+ void arm_pid_reset_f32(
+ arm_pid_instance_f32 * S);
+
+
+ /**
+ * @brief Initialization function for the Q31 PID Control.
+ * @param[in,out] *S points to an instance of the Q15 PID structure.
+ * @param[in] resetStateFlag flag to reset the state. 0 = no change in state 1 = reset the state.
+ * @return none.
+ */
+ void arm_pid_init_q31(
+ arm_pid_instance_q31 * S,
+ int32_t resetStateFlag);
+
+
+ /**
+ * @brief Reset function for the Q31 PID Control.
+ * @param[in,out] *S points to an instance of the Q31 PID Control structure
+ * @return none
+ */
+
+ void arm_pid_reset_q31(
+ arm_pid_instance_q31 * S);
+
+ /**
+ * @brief Initialization function for the Q15 PID Control.
+ * @param[in,out] *S points to an instance of the Q15 PID structure.
+ * @param[in] resetStateFlag flag to reset the state. 0 = no change in state 1 = reset the state.
+ * @return none.
+ */
+ void arm_pid_init_q15(
+ arm_pid_instance_q15 * S,
+ int32_t resetStateFlag);
+
+ /**
+ * @brief Reset function for the Q15 PID Control.
+ * @param[in,out] *S points to an instance of the q15 PID Control structure
+ * @return none
+ */
+ void arm_pid_reset_q15(
+ arm_pid_instance_q15 * S);
+
+
+ /**
+ * @brief Instance structure for the floating-point Linear Interpolate function.
+ */
+ typedef struct
+ {
+ uint32_t nValues;
+ float32_t x1;
+ float32_t xSpacing;
+ float32_t *pYData; /**< pointer to the table of Y values */
+ } arm_linear_interp_instance_f32;
+
+ /**
+ * @brief Instance structure for the floating-point bilinear interpolation function.
+ */
+
+ typedef struct
+ {
+ uint16_t numRows; /**< number of rows in the data table. */
+ uint16_t numCols; /**< number of columns in the data table. */
+ float32_t *pData; /**< points to the data table. */
+ } arm_bilinear_interp_instance_f32;
+
+ /**
+ * @brief Instance structure for the Q31 bilinear interpolation function.
+ */
+
+ typedef struct
+ {
+ uint16_t numRows; /**< number of rows in the data table. */
+ uint16_t numCols; /**< number of columns in the data table. */
+ q31_t *pData; /**< points to the data table. */
+ } arm_bilinear_interp_instance_q31;
+
+ /**
+ * @brief Instance structure for the Q15 bilinear interpolation function.
+ */
+
+ typedef struct
+ {
+ uint16_t numRows; /**< number of rows in the data table. */
+ uint16_t numCols; /**< number of columns in the data table. */
+ q15_t *pData; /**< points to the data table. */
+ } arm_bilinear_interp_instance_q15;
+
+ /**
+ * @brief Instance structure for the Q15 bilinear interpolation function.
+ */
+
+ typedef struct
+ {
+ uint16_t numRows; /**< number of rows in the data table. */
+ uint16_t numCols; /**< number of columns in the data table. */
+ q7_t *pData; /**< points to the data table. */
+ } arm_bilinear_interp_instance_q7;
+
+
+ /**
+ * @brief Q7 vector multiplication.
+ * @param[in] *pSrcA points to the first input vector
+ * @param[in] *pSrcB points to the second input vector
+ * @param[out] *pDst points to the output vector
+ * @param[in] blockSize number of samples in each vector
+ * @return none.
+ */
+
+ void arm_mult_q7(
+ q7_t * pSrcA,
+ q7_t * pSrcB,
+ q7_t * pDst,
+ uint32_t blockSize);
+
+ /**
+ * @brief Q15 vector multiplication.
+ * @param[in] *pSrcA points to the first input vector
+ * @param[in] *pSrcB points to the second input vector
+ * @param[out] *pDst points to the output vector
+ * @param[in] blockSize number of samples in each vector
+ * @return none.
+ */
+
+ void arm_mult_q15(
+ q15_t * pSrcA,
+ q15_t * pSrcB,
+ q15_t * pDst,
+ uint32_t blockSize);
+
+ /**
+ * @brief Q31 vector multiplication.
+ * @param[in] *pSrcA points to the first input vector
+ * @param[in] *pSrcB points to the second input vector
+ * @param[out] *pDst points to the output vector
+ * @param[in] blockSize number of samples in each vector
+ * @return none.
+ */
+
+ void arm_mult_q31(
+ q31_t * pSrcA,
+ q31_t * pSrcB,
+ q31_t * pDst,
+ uint32_t blockSize);
+
+ /**
+ * @brief Floating-point vector multiplication.
+ * @param[in] *pSrcA points to the first input vector
+ * @param[in] *pSrcB points to the second input vector
+ * @param[out] *pDst points to the output vector
+ * @param[in] blockSize number of samples in each vector
+ * @return none.
+ */
+
+ void arm_mult_f32(
+ float32_t * pSrcA,
+ float32_t * pSrcB,
+ float32_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Instance structure for the Q15 CFFT/CIFFT function.
+ */
+
+ typedef struct
+ {
+ uint16_t fftLen; /**< length of the FFT. */
+ uint8_t ifftFlag; /**< flag that selects forward (ifftFlag=0) or inverse (ifftFlag=1) transform. */
+ uint8_t bitReverseFlag; /**< flag that enables (bitReverseFlag=1) or disables (bitReverseFlag=0) bit reversal of output. */
+ q15_t *pTwiddle; /**< points to the twiddle factor table. */
+ uint16_t *pBitRevTable; /**< points to the bit reversal table. */
+ uint16_t twidCoefModifier; /**< twiddle coefficient modifier that supports different size FFTs with the same twiddle factor table. */
+ uint16_t bitRevFactor; /**< bit reversal modifier that supports different size FFTs with the same bit reversal table. */
+ } arm_cfft_radix4_instance_q15;
+
+ /**
+ * @brief Instance structure for the Q31 CFFT/CIFFT function.
+ */
+
+ typedef struct
+ {
+ uint16_t fftLen; /**< length of the FFT. */
+ uint8_t ifftFlag; /**< flag that selects forward (ifftFlag=0) or inverse (ifftFlag=1) transform. */
+ uint8_t bitReverseFlag; /**< flag that enables (bitReverseFlag=1) or disables (bitReverseFlag=0) bit reversal of output. */
+ q31_t *pTwiddle; /**< points to the twiddle factor table. */
+ uint16_t *pBitRevTable; /**< points to the bit reversal table. */
+ uint16_t twidCoefModifier; /**< twiddle coefficient modifier that supports different size FFTs with the same twiddle factor table. */
+ uint16_t bitRevFactor; /**< bit reversal modifier that supports different size FFTs with the same bit reversal table. */
+ } arm_cfft_radix4_instance_q31;
+
+ /**
+ * @brief Instance structure for the floating-point CFFT/CIFFT function.
+ */
+
+ typedef struct
+ {
+ uint16_t fftLen; /**< length of the FFT. */
+ uint8_t ifftFlag; /**< flag that selects forward (ifftFlag=0) or inverse (ifftFlag=1) transform. */
+ uint8_t bitReverseFlag; /**< flag that enables (bitReverseFlag=1) or disables (bitReverseFlag=0) bit reversal of output. */
+ float32_t *pTwiddle; /**< points to the twiddle factor table. */
+ uint16_t *pBitRevTable; /**< points to the bit reversal table. */
+ uint16_t twidCoefModifier; /**< twiddle coefficient modifier that supports different size FFTs with the same twiddle factor table. */
+ uint16_t bitRevFactor; /**< bit reversal modifier that supports different size FFTs with the same bit reversal table. */
+ float32_t onebyfftLen; /**< value of 1/fftLen. */
+ } arm_cfft_radix4_instance_f32;
+
+ /**
+ * @brief Processing function for the Q15 CFFT/CIFFT.
+ * @param[in] *S points to an instance of the Q15 CFFT/CIFFT structure.
+ * @param[in, out] *pSrc points to the complex data buffer. Processing occurs in-place.
+ * @return none.
+ */
+
+ void arm_cfft_radix4_q15(
+ const arm_cfft_radix4_instance_q15 * S,
+ q15_t * pSrc);
+
+ /**
+ * @brief Initialization function for the Q15 CFFT/CIFFT.
+ * @param[in,out] *S points to an instance of the Q15 CFFT/CIFFT structure.
+ * @param[in] fftLen length of the FFT.
+ * @param[in] ifftFlag flag that selects forward (ifftFlag=0) or inverse (ifftFlag=1) transform.
+ * @param[in] bitReverseFlag flag that enables (bitReverseFlag=1) or disables (bitReverseFlag=0) bit reversal of output.
+ * @return arm_status function returns ARM_MATH_SUCCESS if initialization is successful or ARM_MATH_ARGUMENT_ERROR if <code>fftLen</code> is not a supported value.
+ */
+
+ arm_status arm_cfft_radix4_init_q15(
+ arm_cfft_radix4_instance_q15 * S,
+ uint16_t fftLen,
+ uint8_t ifftFlag,
+ uint8_t bitReverseFlag);
+
+ /**
+ * @brief Processing function for the Q31 CFFT/CIFFT.
+ * @param[in] *S points to an instance of the Q31 CFFT/CIFFT structure.
+ * @param[in, out] *pSrc points to the complex data buffer. Processing occurs in-place.
+ * @return none.
+ */
+
+ void arm_cfft_radix4_q31(
+ const arm_cfft_radix4_instance_q31 * S,
+ q31_t * pSrc);
+
+ /**
+ * @brief Initialization function for the Q31 CFFT/CIFFT.
+ * @param[in,out] *S points to an instance of the Q31 CFFT/CIFFT structure.
+ * @param[in] fftLen length of the FFT.
+ * @param[in] ifftFlag flag that selects forward (ifftFlag=0) or inverse (ifftFlag=1) transform.
+ * @param[in] bitReverseFlag flag that enables (bitReverseFlag=1) or disables (bitReverseFlag=0) bit reversal of output.
+ * @return arm_status function returns ARM_MATH_SUCCESS if initialization is successful or ARM_MATH_ARGUMENT_ERROR if <code>fftLen</code> is not a supported value.
+ */
+
+ arm_status arm_cfft_radix4_init_q31(
+ arm_cfft_radix4_instance_q31 * S,
+ uint16_t fftLen,
+ uint8_t ifftFlag,
+ uint8_t bitReverseFlag);
+
+ /**
+ * @brief Processing function for the floating-point CFFT/CIFFT.
+ * @param[in] *S points to an instance of the floating-point CFFT/CIFFT structure.
+ * @param[in, out] *pSrc points to the complex data buffer. Processing occurs in-place.
+ * @return none.
+ */
+
+ void arm_cfft_radix4_f32(
+ const arm_cfft_radix4_instance_f32 * S,
+ float32_t * pSrc);
+
+ /**
+ * @brief Initialization function for the floating-point CFFT/CIFFT.
+ * @param[in,out] *S points to an instance of the floating-point CFFT/CIFFT structure.
+ * @param[in] fftLen length of the FFT.
+ * @param[in] ifftFlag flag that selects forward (ifftFlag=0) or inverse (ifftFlag=1) transform.
+ * @param[in] bitReverseFlag flag that enables (bitReverseFlag=1) or disables (bitReverseFlag=0) bit reversal of output.
+ * @return The function returns ARM_MATH_SUCCESS if initialization is successful or ARM_MATH_ARGUMENT_ERROR if <code>fftLen</code> is not a supported value.
+ */
+
+ arm_status arm_cfft_radix4_init_f32(
+ arm_cfft_radix4_instance_f32 * S,
+ uint16_t fftLen,
+ uint8_t ifftFlag,
+ uint8_t bitReverseFlag);
+
+
+
+ /*----------------------------------------------------------------------
+ * Internal functions prototypes FFT function
+ ----------------------------------------------------------------------*/
+
+ /**
+ * @brief Core function for the floating-point CFFT butterfly process.
+ * @param[in, out] *pSrc points to the in-place buffer of floating-point data type.
+ * @param[in] fftLen length of the FFT.
+ * @param[in] *pCoef points to the twiddle coefficient buffer.
+ * @param[in] twidCoefModifier twiddle coefficient modifier that supports different size FFTs with the same twiddle factor table.
+ * @return none.
+ */
+
+ void arm_radix4_butterfly_f32(
+ float32_t * pSrc,
+ uint16_t fftLen,
+ float32_t * pCoef,
+ uint16_t twidCoefModifier);
+
+ /**
+ * @brief Core function for the floating-point CIFFT butterfly process.
+ * @param[in, out] *pSrc points to the in-place buffer of floating-point data type.
+ * @param[in] fftLen length of the FFT.
+ * @param[in] *pCoef points to twiddle coefficient buffer.
+ * @param[in] twidCoefModifier twiddle coefficient modifier that supports different size FFTs with the same twiddle factor table.
+ * @param[in] onebyfftLen value of 1/fftLen.
+ * @return none.
+ */
+
+ void arm_radix4_butterfly_inverse_f32(
+ float32_t * pSrc,
+ uint16_t fftLen,
+ float32_t * pCoef,
+ uint16_t twidCoefModifier,
+ float32_t onebyfftLen);
+
+ /**
+ * @brief In-place bit reversal function.
+ * @param[in, out] *pSrc points to the in-place buffer of floating-point data type.
+ * @param[in] fftSize length of the FFT.
+ * @param[in] bitRevFactor bit reversal modifier that supports different size FFTs with the same bit reversal table.
+ * @param[in] *pBitRevTab points to the bit reversal table.
+ * @return none.
+ */
+
+ void arm_bitreversal_f32(
+ float32_t *pSrc,
+ uint16_t fftSize,
+ uint16_t bitRevFactor,
+ uint16_t *pBitRevTab);
+
+ /**
+ * @brief Core function for the Q31 CFFT butterfly process.
+ * @param[in, out] *pSrc points to the in-place buffer of Q31 data type.
+ * @param[in] fftLen length of the FFT.
+ * @param[in] *pCoef points to twiddle coefficient buffer.
+ * @param[in] twidCoefModifier twiddle coefficient modifier that supports different size FFTs with the same twiddle factor table.
+ * @return none.
+ */
+
+ void arm_radix4_butterfly_q31(
+ q31_t *pSrc,
+ uint32_t fftLen,
+ q31_t *pCoef,
+ uint32_t twidCoefModifier);
+
+ /**
+ * @brief Core function for the Q31 CIFFT butterfly process.
+ * @param[in, out] *pSrc points to the in-place buffer of Q31 data type.
+ * @param[in] fftLen length of the FFT.
+ * @param[in] *pCoef points to twiddle coefficient buffer.
+ * @param[in] twidCoefModifier twiddle coefficient modifier that supports different size FFTs with the same twiddle factor table.
+ * @return none.
+ */
+
+ void arm_radix4_butterfly_inverse_q31(
+ q31_t * pSrc,
+ uint32_t fftLen,
+ q31_t * pCoef,
+ uint32_t twidCoefModifier);
+
+ /**
+ * @brief In-place bit reversal function.
+ * @param[in, out] *pSrc points to the in-place buffer of Q31 data type.
+ * @param[in] fftLen length of the FFT.
+ * @param[in] bitRevFactor bit reversal modifier that supports different size FFTs with the same bit reversal table
+ * @param[in] *pBitRevTab points to bit reversal table.
+ * @return none.
+ */
+
+ void arm_bitreversal_q31(
+ q31_t * pSrc,
+ uint32_t fftLen,
+ uint16_t bitRevFactor,
+ uint16_t *pBitRevTab);
+
+ /**
+ * @brief Core function for the Q15 CFFT butterfly process.
+ * @param[in, out] *pSrc16 points to the in-place buffer of Q15 data type.
+ * @param[in] fftLen length of the FFT.
+ * @param[in] *pCoef16 points to twiddle coefficient buffer.
+ * @param[in] twidCoefModifier twiddle coefficient modifier that supports different size FFTs with the same twiddle factor table.
+ * @return none.
+ */
+
+ void arm_radix4_butterfly_q15(
+ q15_t *pSrc16,
+ uint32_t fftLen,
+ q15_t *pCoef16,
+ uint32_t twidCoefModifier);
+
+ /**
+ * @brief Core function for the Q15 CIFFT butterfly process.
+ * @param[in, out] *pSrc16 points to the in-place buffer of Q15 data type.
+ * @param[in] fftLen length of the FFT.
+ * @param[in] *pCoef16 points to twiddle coefficient buffer.
+ * @param[in] twidCoefModifier twiddle coefficient modifier that supports different size FFTs with the same twiddle factor table.
+ * @return none.
+ */
+
+ void arm_radix4_butterfly_inverse_q15(
+ q15_t *pSrc16,
+ uint32_t fftLen,
+ q15_t *pCoef16,
+ uint32_t twidCoefModifier);
+
+ /**
+ * @brief In-place bit reversal function.
+ * @param[in, out] *pSrc points to the in-place buffer of Q15 data type.
+ * @param[in] fftLen length of the FFT.
+ * @param[in] bitRevFactor bit reversal modifier that supports different size FFTs with the same bit reversal table
+ * @param[in] *pBitRevTab points to bit reversal table.
+ * @return none.
+ */
+
+ void arm_bitreversal_q15(
+ q15_t * pSrc,
+ uint32_t fftLen,
+ uint16_t bitRevFactor,
+ uint16_t *pBitRevTab);
+
+ /**
+ * @brief Instance structure for the Q15 RFFT/RIFFT function.
+ */
+
+ typedef struct
+ {
+ uint32_t fftLenReal; /**< length of the real FFT. */
+ uint32_t fftLenBy2; /**< length of the complex FFT. */
+ uint8_t ifftFlagR; /**< flag that selects forward (ifftFlagR=0) or inverse (ifftFlagR=1) transform. */
+ uint8_t bitReverseFlagR; /**< flag that enables (bitReverseFlagR=1) or disables (bitReverseFlagR=0) bit reversal of output. */
+ uint32_t twidCoefRModifier; /**< twiddle coefficient modifier that supports different size FFTs with the same twiddle factor table. */
+ q15_t *pTwiddleAReal; /**< points to the real twiddle factor table. */
+ q15_t *pTwiddleBReal; /**< points to the imag twiddle factor table. */
+ arm_cfft_radix4_instance_q15 *pCfft; /**< points to the complex FFT instance. */
+ } arm_rfft_instance_q15;
+
+ /**
+ * @brief Instance structure for the Q31 RFFT/RIFFT function.
+ */
+
+ typedef struct
+ {
+ uint32_t fftLenReal; /**< length of the real FFT. */
+ uint32_t fftLenBy2; /**< length of the complex FFT. */
+ uint8_t ifftFlagR; /**< flag that selects forward (ifftFlagR=0) or inverse (ifftFlagR=1) transform. */
+ uint8_t bitReverseFlagR; /**< flag that enables (bitReverseFlagR=1) or disables (bitReverseFlagR=0) bit reversal of output. */
+ uint32_t twidCoefRModifier; /**< twiddle coefficient modifier that supports different size FFTs with the same twiddle factor table. */
+ q31_t *pTwiddleAReal; /**< points to the real twiddle factor table. */
+ q31_t *pTwiddleBReal; /**< points to the imag twiddle factor table. */
+ arm_cfft_radix4_instance_q31 *pCfft; /**< points to the complex FFT instance. */
+ } arm_rfft_instance_q31;
+
+ /**
+ * @brief Instance structure for the floating-point RFFT/RIFFT function.
+ */
+
+ typedef struct
+ {
+ uint32_t fftLenReal; /**< length of the real FFT. */
+ uint16_t fftLenBy2; /**< length of the complex FFT. */
+ uint8_t ifftFlagR; /**< flag that selects forward (ifftFlagR=0) or inverse (ifftFlagR=1) transform. */
+ uint8_t bitReverseFlagR; /**< flag that enables (bitReverseFlagR=1) or disables (bitReverseFlagR=0) bit reversal of output. */
+ uint32_t twidCoefRModifier; /**< twiddle coefficient modifier that supports different size FFTs with the same twiddle factor table. */
+ float32_t *pTwiddleAReal; /**< points to the real twiddle factor table. */
+ float32_t *pTwiddleBReal; /**< points to the imag twiddle factor table. */
+ arm_cfft_radix4_instance_f32 *pCfft; /**< points to the complex FFT instance. */
+ } arm_rfft_instance_f32;
+
+ /**
+ * @brief Processing function for the Q15 RFFT/RIFFT.
+ * @param[in] *S points to an instance of the Q15 RFFT/RIFFT structure.
+ * @param[in] *pSrc points to the input buffer.
+ * @param[out] *pDst points to the output buffer.
+ * @return none.
+ */
+
+ void arm_rfft_q15(
+ const arm_rfft_instance_q15 * S,
+ q15_t * pSrc,
+ q15_t * pDst);
+
+ /**
+ * @brief Initialization function for the Q15 RFFT/RIFFT.
+ * @param[in, out] *S points to an instance of the Q15 RFFT/RIFFT structure.
+ * @param[in] *S_CFFT points to an instance of the Q15 CFFT/CIFFT structure.
+ * @param[in] fftLenReal length of the FFT.
+ * @param[in] ifftFlagR flag that selects forward (ifftFlagR=0) or inverse (ifftFlagR=1) transform.
+ * @param[in] bitReverseFlag flag that enables (bitReverseFlag=1) or disables (bitReverseFlag=0) bit reversal of output.
+ * @return The function returns ARM_MATH_SUCCESS if initialization is successful or ARM_MATH_ARGUMENT_ERROR if <code>fftLenReal</code> is not a supported value.
+ */
+
+ arm_status arm_rfft_init_q15(
+ arm_rfft_instance_q15 * S,
+ arm_cfft_radix4_instance_q15 * S_CFFT,
+ uint32_t fftLenReal,
+ uint32_t ifftFlagR,
+ uint32_t bitReverseFlag);
+
+ /**
+ * @brief Processing function for the Q31 RFFT/RIFFT.
+ * @param[in] *S points to an instance of the Q31 RFFT/RIFFT structure.
+ * @param[in] *pSrc points to the input buffer.
+ * @param[out] *pDst points to the output buffer.
+ * @return none.
+ */
+
+ void arm_rfft_q31(
+ const arm_rfft_instance_q31 * S,
+ q31_t * pSrc,
+ q31_t * pDst);
+
+ /**
+ * @brief Initialization function for the Q31 RFFT/RIFFT.
+ * @param[in, out] *S points to an instance of the Q31 RFFT/RIFFT structure.
+ * @param[in, out] *S_CFFT points to an instance of the Q31 CFFT/CIFFT structure.
+ * @param[in] fftLenReal length of the FFT.
+ * @param[in] ifftFlagR flag that selects forward (ifftFlagR=0) or inverse (ifftFlagR=1) transform.
+ * @param[in] bitReverseFlag flag that enables (bitReverseFlag=1) or disables (bitReverseFlag=0) bit reversal of output.
+ * @return The function returns ARM_MATH_SUCCESS if initialization is successful or ARM_MATH_ARGUMENT_ERROR if <code>fftLenReal</code> is not a supported value.
+ */
+
+ arm_status arm_rfft_init_q31(
+ arm_rfft_instance_q31 * S,
+ arm_cfft_radix4_instance_q31 * S_CFFT,
+ uint32_t fftLenReal,
+ uint32_t ifftFlagR,
+ uint32_t bitReverseFlag);
+
+ /**
+ * @brief Initialization function for the floating-point RFFT/RIFFT.
+ * @param[in,out] *S points to an instance of the floating-point RFFT/RIFFT structure.
+ * @param[in,out] *S_CFFT points to an instance of the floating-point CFFT/CIFFT structure.
+ * @param[in] fftLenReal length of the FFT.
+ * @param[in] ifftFlagR flag that selects forward (ifftFlagR=0) or inverse (ifftFlagR=1) transform.
+ * @param[in] bitReverseFlag flag that enables (bitReverseFlag=1) or disables (bitReverseFlag=0) bit reversal of output.
+ * @return The function returns ARM_MATH_SUCCESS if initialization is successful or ARM_MATH_ARGUMENT_ERROR if <code>fftLenReal</code> is not a supported value.
+ */
+
+ arm_status arm_rfft_init_f32(
+ arm_rfft_instance_f32 * S,
+ arm_cfft_radix4_instance_f32 * S_CFFT,
+ uint32_t fftLenReal,
+ uint32_t ifftFlagR,
+ uint32_t bitReverseFlag);
+
+ /**
+ * @brief Processing function for the floating-point RFFT/RIFFT.
+ * @param[in] *S points to an instance of the floating-point RFFT/RIFFT structure.
+ * @param[in] *pSrc points to the input buffer.
+ * @param[out] *pDst points to the output buffer.
+ * @return none.
+ */
+
+ void arm_rfft_f32(
+ const arm_rfft_instance_f32 * S,
+ float32_t * pSrc,
+ float32_t * pDst);
+
+ /**
+ * @brief Instance structure for the floating-point DCT4/IDCT4 function.
+ */
+
+ typedef struct
+ {
+ uint16_t N; /**< length of the DCT4. */
+ uint16_t Nby2; /**< half of the length of the DCT4. */
+ float32_t normalize; /**< normalizing factor. */
+ float32_t *pTwiddle; /**< points to the twiddle factor table. */
+ float32_t *pCosFactor; /**< points to the cosFactor table. */
+ arm_rfft_instance_f32 *pRfft; /**< points to the real FFT instance. */
+ arm_cfft_radix4_instance_f32 *pCfft; /**< points to the complex FFT instance. */
+ } arm_dct4_instance_f32;
+
+ /**
+ * @brief Initialization function for the floating-point DCT4/IDCT4.
+ * @param[in,out] *S points to an instance of floating-point DCT4/IDCT4 structure.
+ * @param[in] *S_RFFT points to an instance of floating-point RFFT/RIFFT structure.
+ * @param[in] *S_CFFT points to an instance of floating-point CFFT/CIFFT structure.
+ * @param[in] N length of the DCT4.
+ * @param[in] Nby2 half of the length of the DCT4.
+ * @param[in] normalize normalizing factor.
+ * @return arm_status function returns ARM_MATH_SUCCESS if initialization is successful or ARM_MATH_ARGUMENT_ERROR if <code>fftLenReal</code> is not a supported transform length.
+ */
+
+ arm_status arm_dct4_init_f32(
+ arm_dct4_instance_f32 * S,
+ arm_rfft_instance_f32 * S_RFFT,
+ arm_cfft_radix4_instance_f32 * S_CFFT,
+ uint16_t N,
+ uint16_t Nby2,
+ float32_t normalize);
+
+ /**
+ * @brief Processing function for the floating-point DCT4/IDCT4.
+ * @param[in] *S points to an instance of the floating-point DCT4/IDCT4 structure.
+ * @param[in] *pState points to state buffer.
+ * @param[in,out] *pInlineBuffer points to the in-place input and output buffer.
+ * @return none.
+ */
+
+ void arm_dct4_f32(
+ const arm_dct4_instance_f32 * S,
+ float32_t * pState,
+ float32_t * pInlineBuffer);
+
+ /**
+ * @brief Instance structure for the Q31 DCT4/IDCT4 function.
+ */
+
+ typedef struct
+ {
+ uint16_t N; /**< length of the DCT4. */
+ uint16_t Nby2; /**< half of the length of the DCT4. */
+ q31_t normalize; /**< normalizing factor. */
+ q31_t *pTwiddle; /**< points to the twiddle factor table. */
+ q31_t *pCosFactor; /**< points to the cosFactor table. */
+ arm_rfft_instance_q31 *pRfft; /**< points to the real FFT instance. */
+ arm_cfft_radix4_instance_q31 *pCfft; /**< points to the complex FFT instance. */
+ } arm_dct4_instance_q31;
+
+ /**
+ * @brief Initialization function for the Q31 DCT4/IDCT4.
+ * @param[in,out] *S points to an instance of Q31 DCT4/IDCT4 structure.
+ * @param[in] *S_RFFT points to an instance of Q31 RFFT/RIFFT structure
+ * @param[in] *S_CFFT points to an instance of Q31 CFFT/CIFFT structure
+ * @param[in] N length of the DCT4.
+ * @param[in] Nby2 half of the length of the DCT4.
+ * @param[in] normalize normalizing factor.
+ * @return arm_status function returns ARM_MATH_SUCCESS if initialization is successful or ARM_MATH_ARGUMENT_ERROR if <code>N</code> is not a supported transform length.
+ */
+
+ arm_status arm_dct4_init_q31(
+ arm_dct4_instance_q31 * S,
+ arm_rfft_instance_q31 * S_RFFT,
+ arm_cfft_radix4_instance_q31 * S_CFFT,
+ uint16_t N,
+ uint16_t Nby2,
+ q31_t normalize);
+
+ /**
+ * @brief Processing function for the Q31 DCT4/IDCT4.
+ * @param[in] *S points to an instance of the Q31 DCT4 structure.
+ * @param[in] *pState points to state buffer.
+ * @param[in,out] *pInlineBuffer points to the in-place input and output buffer.
+ * @return none.
+ */
+
+ void arm_dct4_q31(
+ const arm_dct4_instance_q31 * S,
+ q31_t * pState,
+ q31_t * pInlineBuffer);
+
+ /**
+ * @brief Instance structure for the Q15 DCT4/IDCT4 function.
+ */
+
+ typedef struct
+ {
+ uint16_t N; /**< length of the DCT4. */
+ uint16_t Nby2; /**< half of the length of the DCT4. */
+ q15_t normalize; /**< normalizing factor. */
+ q15_t *pTwiddle; /**< points to the twiddle factor table. */
+ q15_t *pCosFactor; /**< points to the cosFactor table. */
+ arm_rfft_instance_q15 *pRfft; /**< points to the real FFT instance. */
+ arm_cfft_radix4_instance_q15 *pCfft; /**< points to the complex FFT instance. */
+ } arm_dct4_instance_q15;
+
+ /**
+ * @brief Initialization function for the Q15 DCT4/IDCT4.
+ * @param[in,out] *S points to an instance of Q15 DCT4/IDCT4 structure.
+ * @param[in] *S_RFFT points to an instance of Q15 RFFT/RIFFT structure.
+ * @param[in] *S_CFFT points to an instance of Q15 CFFT/CIFFT structure.
+ * @param[in] N length of the DCT4.
+ * @param[in] Nby2 half of the length of the DCT4.
+ * @param[in] normalize normalizing factor.
+ * @return arm_status function returns ARM_MATH_SUCCESS if initialization is successful or ARM_MATH_ARGUMENT_ERROR if <code>N</code> is not a supported transform length.
+ */
+
+ arm_status arm_dct4_init_q15(
+ arm_dct4_instance_q15 * S,
+ arm_rfft_instance_q15 * S_RFFT,
+ arm_cfft_radix4_instance_q15 * S_CFFT,
+ uint16_t N,
+ uint16_t Nby2,
+ q15_t normalize);
+
+ /**
+ * @brief Processing function for the Q15 DCT4/IDCT4.
+ * @param[in] *S points to an instance of the Q15 DCT4 structure.
+ * @param[in] *pState points to state buffer.
+ * @param[in,out] *pInlineBuffer points to the in-place input and output buffer.
+ * @return none.
+ */
+
+ void arm_dct4_q15(
+ const arm_dct4_instance_q15 * S,
+ q15_t * pState,
+ q15_t * pInlineBuffer);
+
+ /**
+ * @brief Floating-point vector addition.
+ * @param[in] *pSrcA points to the first input vector
+ * @param[in] *pSrcB points to the second input vector
+ * @param[out] *pDst points to the output vector
+ * @param[in] blockSize number of samples in each vector
+ * @return none.
+ */
+
+ void arm_add_f32(
+ float32_t * pSrcA,
+ float32_t * pSrcB,
+ float32_t * pDst,
+ uint32_t blockSize);
+
+ /**
+ * @brief Q7 vector addition.
+ * @param[in] *pSrcA points to the first input vector
+ * @param[in] *pSrcB points to the second input vector
+ * @param[out] *pDst points to the output vector
+ * @param[in] blockSize number of samples in each vector
+ * @return none.
+ */
+
+ void arm_add_q7(
+ q7_t * pSrcA,
+ q7_t * pSrcB,
+ q7_t * pDst,
+ uint32_t blockSize);
+
+ /**
+ * @brief Q15 vector addition.
+ * @param[in] *pSrcA points to the first input vector
+ * @param[in] *pSrcB points to the second input vector
+ * @param[out] *pDst points to the output vector
+ * @param[in] blockSize number of samples in each vector
+ * @return none.
+ */
+
+ void arm_add_q15(
+ q15_t * pSrcA,
+ q15_t * pSrcB,
+ q15_t * pDst,
+ uint32_t blockSize);
+
+ /**
+ * @brief Q31 vector addition.
+ * @param[in] *pSrcA points to the first input vector
+ * @param[in] *pSrcB points to the second input vector
+ * @param[out] *pDst points to the output vector
+ * @param[in] blockSize number of samples in each vector
+ * @return none.
+ */
+
+ void arm_add_q31(
+ q31_t * pSrcA,
+ q31_t * pSrcB,
+ q31_t * pDst,
+ uint32_t blockSize);
+
+ /**
+ * @brief Floating-point vector subtraction.
+ * @param[in] *pSrcA points to the first input vector
+ * @param[in] *pSrcB points to the second input vector
+ * @param[out] *pDst points to the output vector
+ * @param[in] blockSize number of samples in each vector
+ * @return none.
+ */
+
+ void arm_sub_f32(
+ float32_t * pSrcA,
+ float32_t * pSrcB,
+ float32_t * pDst,
+ uint32_t blockSize);
+
+ /**
+ * @brief Q7 vector subtraction.
+ * @param[in] *pSrcA points to the first input vector
+ * @param[in] *pSrcB points to the second input vector
+ * @param[out] *pDst points to the output vector
+ * @param[in] blockSize number of samples in each vector
+ * @return none.
+ */
+
+ void arm_sub_q7(
+ q7_t * pSrcA,
+ q7_t * pSrcB,
+ q7_t * pDst,
+ uint32_t blockSize);
+
+ /**
+ * @brief Q15 vector subtraction.
+ * @param[in] *pSrcA points to the first input vector
+ * @param[in] *pSrcB points to the second input vector
+ * @param[out] *pDst points to the output vector
+ * @param[in] blockSize number of samples in each vector
+ * @return none.
+ */
+
+ void arm_sub_q15(
+ q15_t * pSrcA,
+ q15_t * pSrcB,
+ q15_t * pDst,
+ uint32_t blockSize);
+
+ /**
+ * @brief Q31 vector subtraction.
+ * @param[in] *pSrcA points to the first input vector
+ * @param[in] *pSrcB points to the second input vector
+ * @param[out] *pDst points to the output vector
+ * @param[in] blockSize number of samples in each vector
+ * @return none.
+ */
+
+ void arm_sub_q31(
+ q31_t * pSrcA,
+ q31_t * pSrcB,
+ q31_t * pDst,
+ uint32_t blockSize);
+
+ /**
+ * @brief Multiplies a floating-point vector by a scalar.
+ * @param[in] *pSrc points to the input vector
+ * @param[in] scale scale factor to be applied
+ * @param[out] *pDst points to the output vector
+ * @param[in] blockSize number of samples in the vector
+ * @return none.
+ */
+
+ void arm_scale_f32(
+ float32_t * pSrc,
+ float32_t scale,
+ float32_t * pDst,
+ uint32_t blockSize);
+
+ /**
+ * @brief Multiplies a Q7 vector by a scalar.
+ * @param[in] *pSrc points to the input vector
+ * @param[in] scaleFract fractional portion of the scale value
+ * @param[in] shift number of bits to shift the result by
+ * @param[out] *pDst points to the output vector
+ * @param[in] blockSize number of samples in the vector
+ * @return none.
+ */
+
+ void arm_scale_q7(
+ q7_t * pSrc,
+ q7_t scaleFract,
+ int8_t shift,
+ q7_t * pDst,
+ uint32_t blockSize);
+
+ /**
+ * @brief Multiplies a Q15 vector by a scalar.
+ * @param[in] *pSrc points to the input vector
+ * @param[in] scaleFract fractional portion of the scale value
+ * @param[in] shift number of bits to shift the result by
+ * @param[out] *pDst points to the output vector
+ * @param[in] blockSize number of samples in the vector
+ * @return none.
+ */
+
+ void arm_scale_q15(
+ q15_t * pSrc,
+ q15_t scaleFract,
+ int8_t shift,
+ q15_t * pDst,
+ uint32_t blockSize);
+
+ /**
+ * @brief Multiplies a Q31 vector by a scalar.
+ * @param[in] *pSrc points to the input vector
+ * @param[in] scaleFract fractional portion of the scale value
+ * @param[in] shift number of bits to shift the result by
+ * @param[out] *pDst points to the output vector
+ * @param[in] blockSize number of samples in the vector
+ * @return none.
+ */
+
+ void arm_scale_q31(
+ q31_t * pSrc,
+ q31_t scaleFract,
+ int8_t shift,
+ q31_t * pDst,
+ uint32_t blockSize);
+
+ /**
+ * @brief Q7 vector absolute value.
+ * @param[in] *pSrc points to the input buffer
+ * @param[out] *pDst points to the output buffer
+ * @param[in] blockSize number of samples in each vector
+ * @return none.
+ */
+
+ void arm_abs_q7(
+ q7_t * pSrc,
+ q7_t * pDst,
+ uint32_t blockSize);
+
+ /**
+ * @brief Floating-point vector absolute value.
+ * @param[in] *pSrc points to the input buffer
+ * @param[out] *pDst points to the output buffer
+ * @param[in] blockSize number of samples in each vector
+ * @return none.
+ */
+
+ void arm_abs_f32(
+ float32_t * pSrc,
+ float32_t * pDst,
+ uint32_t blockSize);
+
+ /**
+ * @brief Q15 vector absolute value.
+ * @param[in] *pSrc points to the input buffer
+ * @param[out] *pDst points to the output buffer
+ * @param[in] blockSize number of samples in each vector
+ * @return none.
+ */
+
+ void arm_abs_q15(
+ q15_t * pSrc,
+ q15_t * pDst,
+ uint32_t blockSize);
+
+ /**
+ * @brief Q31 vector absolute value.
+ * @param[in] *pSrc points to the input buffer
+ * @param[out] *pDst points to the output buffer
+ * @param[in] blockSize number of samples in each vector
+ * @return none.
+ */
+
+ void arm_abs_q31(
+ q31_t * pSrc,
+ q31_t * pDst,
+ uint32_t blockSize);
+
+ /**
+ * @brief Dot product of floating-point vectors.
+ * @param[in] *pSrcA points to the first input vector
+ * @param[in] *pSrcB points to the second input vector
+ * @param[in] blockSize number of samples in each vector
+ * @param[out] *result output result returned here
+ * @return none.
+ */
+
+ void arm_dot_prod_f32(
+ float32_t * pSrcA,
+ float32_t * pSrcB,
+ uint32_t blockSize,
+ float32_t * result);
+
+ /**
+ * @brief Dot product of Q7 vectors.
+ * @param[in] *pSrcA points to the first input vector
+ * @param[in] *pSrcB points to the second input vector
+ * @param[in] blockSize number of samples in each vector
+ * @param[out] *result output result returned here
+ * @return none.
+ */
+
+ void arm_dot_prod_q7(
+ q7_t * pSrcA,
+ q7_t * pSrcB,
+ uint32_t blockSize,
+ q31_t * result);
+
+ /**
+ * @brief Dot product of Q15 vectors.
+ * @param[in] *pSrcA points to the first input vector
+ * @param[in] *pSrcB points to the second input vector
+ * @param[in] blockSize number of samples in each vector
+ * @param[out] *result output result returned here
+ * @return none.
+ */
+
+ void arm_dot_prod_q15(
+ q15_t * pSrcA,
+ q15_t * pSrcB,
+ uint32_t blockSize,
+ q63_t * result);
+
+ /**
+ * @brief Dot product of Q31 vectors.
+ * @param[in] *pSrcA points to the first input vector
+ * @param[in] *pSrcB points to the second input vector
+ * @param[in] blockSize number of samples in each vector
+ * @param[out] *result output result returned here
+ * @return none.
+ */
+
+ void arm_dot_prod_q31(
+ q31_t * pSrcA,
+ q31_t * pSrcB,
+ uint32_t blockSize,
+ q63_t * result);
+
+ /**
+ * @brief Shifts the elements of a Q7 vector a specified number of bits.
+ * @param[in] *pSrc points to the input vector
+ * @param[in] shiftBits number of bits to shift. A positive value shifts left; a negative value shifts right.
+ * @param[out] *pDst points to the output vector
+ * @param[in] blockSize number of samples in the vector
+ * @return none.
+ */
+
+ void arm_shift_q7(
+ q7_t * pSrc,
+ int8_t shiftBits,
+ q7_t * pDst,
+ uint32_t blockSize);
+
+ /**
+ * @brief Shifts the elements of a Q15 vector a specified number of bits.
+ * @param[in] *pSrc points to the input vector
+ * @param[in] shiftBits number of bits to shift. A positive value shifts left; a negative value shifts right.
+ * @param[out] *pDst points to the output vector
+ * @param[in] blockSize number of samples in the vector
+ * @return none.
+ */
+
+ void arm_shift_q15(
+ q15_t * pSrc,
+ int8_t shiftBits,
+ q15_t * pDst,
+ uint32_t blockSize);
+
+ /**
+ * @brief Shifts the elements of a Q31 vector a specified number of bits.
+ * @param[in] *pSrc points to the input vector
+ * @param[in] shiftBits number of bits to shift. A positive value shifts left; a negative value shifts right.
+ * @param[out] *pDst points to the output vector
+ * @param[in] blockSize number of samples in the vector
+ * @return none.
+ */
+
+ void arm_shift_q31(
+ q31_t * pSrc,
+ int8_t shiftBits,
+ q31_t * pDst,
+ uint32_t blockSize);
+
+ /**
+ * @brief Adds a constant offset to a floating-point vector.
+ * @param[in] *pSrc points to the input vector
+ * @param[in] offset is the offset to be added
+ * @param[out] *pDst points to the output vector
+ * @param[in] blockSize number of samples in the vector
+ * @return none.
+ */
+
+ void arm_offset_f32(
+ float32_t * pSrc,
+ float32_t offset,
+ float32_t * pDst,
+ uint32_t blockSize);
+
+ /**
+ * @brief Adds a constant offset to a Q7 vector.
+ * @param[in] *pSrc points to the input vector
+ * @param[in] offset is the offset to be added
+ * @param[out] *pDst points to the output vector
+ * @param[in] blockSize number of samples in the vector
+ * @return none.
+ */
+
+ void arm_offset_q7(
+ q7_t * pSrc,
+ q7_t offset,
+ q7_t * pDst,
+ uint32_t blockSize);
+
+ /**
+ * @brief Adds a constant offset to a Q15 vector.
+ * @param[in] *pSrc points to the input vector
+ * @param[in] offset is the offset to be added
+ * @param[out] *pDst points to the output vector
+ * @param[in] blockSize number of samples in the vector
+ * @return none.
+ */
+
+ void arm_offset_q15(
+ q15_t * pSrc,
+ q15_t offset,
+ q15_t * pDst,
+ uint32_t blockSize);
+
+ /**
+ * @brief Adds a constant offset to a Q31 vector.
+ * @param[in] *pSrc points to the input vector
+ * @param[in] offset is the offset to be added
+ * @param[out] *pDst points to the output vector
+ * @param[in] blockSize number of samples in the vector
+ * @return none.
+ */
+
+ void arm_offset_q31(
+ q31_t * pSrc,
+ q31_t offset,
+ q31_t * pDst,
+ uint32_t blockSize);
+
+ /**
+ * @brief Negates the elements of a floating-point vector.
+ * @param[in] *pSrc points to the input vector
+ * @param[out] *pDst points to the output vector
+ * @param[in] blockSize number of samples in the vector
+ * @return none.
+ */
+
+ void arm_negate_f32(
+ float32_t * pSrc,
+ float32_t * pDst,
+ uint32_t blockSize);
+
+ /**
+ * @brief Negates the elements of a Q7 vector.
+ * @param[in] *pSrc points to the input vector
+ * @param[out] *pDst points to the output vector
+ * @param[in] blockSize number of samples in the vector
+ * @return none.
+ */
+
+ void arm_negate_q7(
+ q7_t * pSrc,
+ q7_t * pDst,
+ uint32_t blockSize);
+
+ /**
+ * @brief Negates the elements of a Q15 vector.
+ * @param[in] *pSrc points to the input vector
+ * @param[out] *pDst points to the output vector
+ * @param[in] blockSize number of samples in the vector
+ * @return none.
+ */
+
+ void arm_negate_q15(
+ q15_t * pSrc,
+ q15_t * pDst,
+ uint32_t blockSize);
+
+ /**
+ * @brief Negates the elements of a Q31 vector.
+ * @param[in] *pSrc points to the input vector
+ * @param[out] *pDst points to the output vector
+ * @param[in] blockSize number of samples in the vector
+ * @return none.
+ */
+
+ void arm_negate_q31(
+ q31_t * pSrc,
+ q31_t * pDst,
+ uint32_t blockSize);
+ /**
+ * @brief Copies the elements of a floating-point vector.
+ * @param[in] *pSrc input pointer
+ * @param[out] *pDst output pointer
+ * @param[in] blockSize number of samples to process
+ * @return none.
+ */
+ void arm_copy_f32(
+ float32_t * pSrc,
+ float32_t * pDst,
+ uint32_t blockSize);
+
+ /**
+ * @brief Copies the elements of a Q7 vector.
+ * @param[in] *pSrc input pointer
+ * @param[out] *pDst output pointer
+ * @param[in] blockSize number of samples to process
+ * @return none.
+ */
+ void arm_copy_q7(
+ q7_t * pSrc,
+ q7_t * pDst,
+ uint32_t blockSize);
+
+ /**
+ * @brief Copies the elements of a Q15 vector.
+ * @param[in] *pSrc input pointer
+ * @param[out] *pDst output pointer
+ * @param[in] blockSize number of samples to process
+ * @return none.
+ */
+ void arm_copy_q15(
+ q15_t * pSrc,
+ q15_t * pDst,
+ uint32_t blockSize);
+
+ /**
+ * @brief Copies the elements of a Q31 vector.
+ * @param[in] *pSrc input pointer
+ * @param[out] *pDst output pointer
+ * @param[in] blockSize number of samples to process
+ * @return none.
+ */
+ void arm_copy_q31(
+ q31_t * pSrc,
+ q31_t * pDst,
+ uint32_t blockSize);
+ /**
+ * @brief Fills a constant value into a floating-point vector.
+ * @param[in] value input value to be filled
+ * @param[out] *pDst output pointer
+ * @param[in] blockSize number of samples to process
+ * @return none.
+ */
+ void arm_fill_f32(
+ float32_t value,
+ float32_t * pDst,
+ uint32_t blockSize);
+
+ /**
+ * @brief Fills a constant value into a Q7 vector.
+ * @param[in] value input value to be filled
+ * @param[out] *pDst output pointer
+ * @param[in] blockSize number of samples to process
+ * @return none.
+ */
+ void arm_fill_q7(
+ q7_t value,
+ q7_t * pDst,
+ uint32_t blockSize);
+
+ /**
+ * @brief Fills a constant value into a Q15 vector.
+ * @param[in] value input value to be filled
+ * @param[out] *pDst output pointer
+ * @param[in] blockSize number of samples to process
+ * @return none.
+ */
+ void arm_fill_q15(
+ q15_t value,
+ q15_t * pDst,
+ uint32_t blockSize);
+
+ /**
+ * @brief Fills a constant value into a Q31 vector.
+ * @param[in] value input value to be filled
+ * @param[out] *pDst output pointer
+ * @param[in] blockSize number of samples to process
+ * @return none.
+ */
+ void arm_fill_q31(
+ q31_t value,
+ q31_t * pDst,
+ uint32_t blockSize);
+
+/**
+ * @brief Convolution of floating-point sequences.
+ * @param[in] *pSrcA points to the first input sequence.
+ * @param[in] srcALen length of the first input sequence.
+ * @param[in] *pSrcB points to the second input sequence.
+ * @param[in] srcBLen length of the second input sequence.
+ * @param[out] *pDst points to the location where the output result is written. Length srcALen+srcBLen-1.
+ * @return none.
+ */
+
+ void arm_conv_f32(
+ float32_t * pSrcA,
+ uint32_t srcALen,
+ float32_t * pSrcB,
+ uint32_t srcBLen,
+ float32_t * pDst);
+
+/**
+ * @brief Convolution of Q15 sequences.
+ * @param[in] *pSrcA points to the first input sequence.
+ * @param[in] srcALen length of the first input sequence.
+ * @param[in] *pSrcB points to the second input sequence.
+ * @param[in] srcBLen length of the second input sequence.
+ * @param[out] *pDst points to the location where the output result is written. Length srcALen+srcBLen-1.
+ * @return none.
+ */
+
+ void arm_conv_q15(
+ q15_t * pSrcA,
+ uint32_t srcALen,
+ q15_t * pSrcB,
+ uint32_t srcBLen,
+ q15_t * pDst);
+
+ /**
+ * @brief Convolution of Q15 sequences (fast version) for Cortex-M3 and Cortex-M4
+ * @param[in] *pSrcA points to the first input sequence.
+ * @param[in] srcALen length of the first input sequence.
+ * @param[in] *pSrcB points to the second input sequence.
+ * @param[in] srcBLen length of the second input sequence.
+ * @param[out] *pDst points to the block of output data Length srcALen+srcBLen-1.
+ * @return none.
+ */
+
+ void arm_conv_fast_q15(
+ q15_t * pSrcA,
+ uint32_t srcALen,
+ q15_t * pSrcB,
+ uint32_t srcBLen,
+ q15_t * pDst);
+
+ /**
+ * @brief Convolution of Q31 sequences.
+ * @param[in] *pSrcA points to the first input sequence.
+ * @param[in] srcALen length of the first input sequence.
+ * @param[in] *pSrcB points to the second input sequence.
+ * @param[in] srcBLen length of the second input sequence.
+ * @param[out] *pDst points to the block of output data Length srcALen+srcBLen-1.
+ * @return none.
+ */
+
+ void arm_conv_q31(
+ q31_t * pSrcA,
+ uint32_t srcALen,
+ q31_t * pSrcB,
+ uint32_t srcBLen,
+ q31_t * pDst);
+
+ /**
+ * @brief Convolution of Q31 sequences (fast version) for Cortex-M3 and Cortex-M4
+ * @param[in] *pSrcA points to the first input sequence.
+ * @param[in] srcALen length of the first input sequence.
+ * @param[in] *pSrcB points to the second input sequence.
+ * @param[in] srcBLen length of the second input sequence.
+ * @param[out] *pDst points to the block of output data Length srcALen+srcBLen-1.
+ * @return none.
+ */
+
+ void arm_conv_fast_q31(
+ q31_t * pSrcA,
+ uint32_t srcALen,
+ q31_t * pSrcB,
+ uint32_t srcBLen,
+ q31_t * pDst);
+
+ /**
+ * @brief Convolution of Q7 sequences.
+ * @param[in] *pSrcA points to the first input sequence.
+ * @param[in] srcALen length of the first input sequence.
+ * @param[in] *pSrcB points to the second input sequence.
+ * @param[in] srcBLen length of the second input sequence.
+ * @param[out] *pDst points to the block of output data Length srcALen+srcBLen-1.
+ * @return none.
+ */
+
+ void arm_conv_q7(
+ q7_t * pSrcA,
+ uint32_t srcALen,
+ q7_t * pSrcB,
+ uint32_t srcBLen,
+ q7_t * pDst);
+
+ /**
+ * @brief Partial convolution of floating-point sequences.
+ * @param[in] *pSrcA points to the first input sequence.
+ * @param[in] srcALen length of the first input sequence.
+ * @param[in] *pSrcB points to the second input sequence.
+ * @param[in] srcBLen length of the second input sequence.
+ * @param[out] *pDst points to the block of output data
+ * @param[in] firstIndex is the first output sample to start with.
+ * @param[in] numPoints is the number of output points to be computed.
+ * @return Returns either ARM_MATH_SUCCESS if the function completed correctly or ARM_MATH_ARGUMENT_ERROR if the requested subset is not in the range [0 srcALen+srcBLen-2].
+ */
+
+ arm_status arm_conv_partial_f32(
+ float32_t * pSrcA,
+ uint32_t srcALen,
+ float32_t * pSrcB,
+ uint32_t srcBLen,
+ float32_t * pDst,
+ uint32_t firstIndex,
+ uint32_t numPoints);
+
+ /**
+ * @brief Partial convolution of Q15 sequences.
+ * @param[in] *pSrcA points to the first input sequence.
+ * @param[in] srcALen length of the first input sequence.
+ * @param[in] *pSrcB points to the second input sequence.
+ * @param[in] srcBLen length of the second input sequence.
+ * @param[out] *pDst points to the block of output data
+ * @param[in] firstIndex is the first output sample to start with.
+ * @param[in] numPoints is the number of output points to be computed.
+ * @return Returns either ARM_MATH_SUCCESS if the function completed correctly or ARM_MATH_ARGUMENT_ERROR if the requested subset is not in the range [0 srcALen+srcBLen-2].
+ */
+
+ arm_status arm_conv_partial_q15(
+ q15_t * pSrcA,
+ uint32_t srcALen,
+ q15_t * pSrcB,
+ uint32_t srcBLen,
+ q15_t * pDst,
+ uint32_t firstIndex,
+ uint32_t numPoints);
+
+ /**
+ * @brief Partial convolution of Q15 sequences (fast version) for Cortex-M3 and Cortex-M4
+ * @param[in] *pSrcA points to the first input sequence.
+ * @param[in] srcALen length of the first input sequence.
+ * @param[in] *pSrcB points to the second input sequence.
+ * @param[in] srcBLen length of the second input sequence.
+ * @param[out] *pDst points to the block of output data
+ * @param[in] firstIndex is the first output sample to start with.
+ * @param[in] numPoints is the number of output points to be computed.
+ * @return Returns either ARM_MATH_SUCCESS if the function completed correctly or ARM_MATH_ARGUMENT_ERROR if the requested subset is not in the range [0 srcALen+srcBLen-2].
+ */
+
+ arm_status arm_conv_partial_fast_q15(
+ q15_t * pSrcA,
+ uint32_t srcALen,
+ q15_t * pSrcB,
+ uint32_t srcBLen,
+ q15_t * pDst,
+ uint32_t firstIndex,
+ uint32_t numPoints);
+
+ /**
+ * @brief Partial convolution of Q31 sequences.
+ * @param[in] *pSrcA points to the first input sequence.
+ * @param[in] srcALen length of the first input sequence.
+ * @param[in] *pSrcB points to the second input sequence.
+ * @param[in] srcBLen length of the second input sequence.
+ * @param[out] *pDst points to the block of output data
+ * @param[in] firstIndex is the first output sample to start with.
+ * @param[in] numPoints is the number of output points to be computed.
+ * @return Returns either ARM_MATH_SUCCESS if the function completed correctly or ARM_MATH_ARGUMENT_ERROR if the requested subset is not in the range [0 srcALen+srcBLen-2].
+ */
+
+ arm_status arm_conv_partial_q31(
+ q31_t * pSrcA,
+ uint32_t srcALen,
+ q31_t * pSrcB,
+ uint32_t srcBLen,
+ q31_t * pDst,
+ uint32_t firstIndex,
+ uint32_t numPoints);
+
+
+ /**
+ * @brief Partial convolution of Q31 sequences (fast version) for Cortex-M3 and Cortex-M4
+ * @param[in] *pSrcA points to the first input sequence.
+ * @param[in] srcALen length of the first input sequence.
+ * @param[in] *pSrcB points to the second input sequence.
+ * @param[in] srcBLen length of the second input sequence.
+ * @param[out] *pDst points to the block of output data
+ * @param[in] firstIndex is the first output sample to start with.
+ * @param[in] numPoints is the number of output points to be computed.
+ * @return Returns either ARM_MATH_SUCCESS if the function completed correctly or ARM_MATH_ARGUMENT_ERROR if the requested subset is not in the range [0 srcALen+srcBLen-2].
+ */
+
+ arm_status arm_conv_partial_fast_q31(
+ q31_t * pSrcA,
+ uint32_t srcALen,
+ q31_t * pSrcB,
+ uint32_t srcBLen,
+ q31_t * pDst,
+ uint32_t firstIndex,
+ uint32_t numPoints);
+
+ /**
+ * @brief Partial convolution of Q7 sequences.
+ * @param[in] *pSrcA points to the first input sequence.
+ * @param[in] srcALen length of the first input sequence.
+ * @param[in] *pSrcB points to the second input sequence.
+ * @param[in] srcBLen length of the second input sequence.
+ * @param[out] *pDst points to the block of output data
+ * @param[in] firstIndex is the first output sample to start with.
+ * @param[in] numPoints is the number of output points to be computed.
+ * @return Returns either ARM_MATH_SUCCESS if the function completed correctly or ARM_MATH_ARGUMENT_ERROR if the requested subset is not in the range [0 srcALen+srcBLen-2].
+ */
+
+ arm_status arm_conv_partial_q7(
+ q7_t * pSrcA,
+ uint32_t srcALen,
+ q7_t * pSrcB,
+ uint32_t srcBLen,
+ q7_t * pDst,
+ uint32_t firstIndex,
+ uint32_t numPoints);
+
+
+ /**
+ * @brief Instance structure for the Q15 FIR decimator.
+ */
+
+ typedef struct
+ {
+ uint8_t M; /**< decimation factor. */
+ uint16_t numTaps; /**< number of coefficients in the filter. */
+ q15_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps.*/
+ q15_t *pState; /**< points to the state variable array. The array is of length numTaps+blockSize-1. */
+ } arm_fir_decimate_instance_q15;
+
+ /**
+ * @brief Instance structure for the Q31 FIR decimator.
+ */
+
+ typedef struct
+ {
+ uint8_t M; /**< decimation factor. */
+ uint16_t numTaps; /**< number of coefficients in the filter. */
+ q31_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps.*/
+ q31_t *pState; /**< points to the state variable array. The array is of length numTaps+blockSize-1. */
+
+ } arm_fir_decimate_instance_q31;
+
+ /**
+ * @brief Instance structure for the floating-point FIR decimator.
+ */
+
+ typedef struct
+ {
+ uint8_t M; /**< decimation factor. */
+ uint16_t numTaps; /**< number of coefficients in the filter. */
+ float32_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps.*/
+ float32_t *pState; /**< points to the state variable array. The array is of length numTaps+blockSize-1. */
+
+ } arm_fir_decimate_instance_f32;
+
+
+
+ /**
+ * @brief Processing function for the floating-point FIR decimator.
+ * @param[in] *S points to an instance of the floating-point FIR decimator structure.
+ * @param[in] *pSrc points to the block of input data.
+ * @param[out] *pDst points to the block of output data
+ * @param[in] blockSize number of input samples to process per call.
+ * @return none
+ */
+
+ void arm_fir_decimate_f32(
+ const arm_fir_decimate_instance_f32 * S,
+ float32_t * pSrc,
+ float32_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Initialization function for the floating-point FIR decimator.
+ * @param[in,out] *S points to an instance of the floating-point FIR decimator structure.
+ * @param[in] numTaps number of coefficients in the filter.
+ * @param[in] M decimation factor.
+ * @param[in] *pCoeffs points to the filter coefficients.
+ * @param[in] *pState points to the state buffer.
+ * @param[in] blockSize number of input samples to process per call.
+ * @return The function returns ARM_MATH_SUCCESS if initialization is successful or ARM_MATH_LENGTH_ERROR if
+ * <code>blockSize</code> is not a multiple of <code>M</code>.
+ */
+
+ arm_status arm_fir_decimate_init_f32(
+ arm_fir_decimate_instance_f32 * S,
+ uint16_t numTaps,
+ uint8_t M,
+ float32_t * pCoeffs,
+ float32_t * pState,
+ uint32_t blockSize);
+
+ /**
+ * @brief Processing function for the Q15 FIR decimator.
+ * @param[in] *S points to an instance of the Q15 FIR decimator structure.
+ * @param[in] *pSrc points to the block of input data.
+ * @param[out] *pDst points to the block of output data
+ * @param[in] blockSize number of input samples to process per call.
+ * @return none
+ */
+
+ void arm_fir_decimate_q15(
+ const arm_fir_decimate_instance_q15 * S,
+ q15_t * pSrc,
+ q15_t * pDst,
+ uint32_t blockSize);
+
+ /**
+ * @brief Processing function for the Q15 FIR decimator (fast variant) for Cortex-M3 and Cortex-M4.
+ * @param[in] *S points to an instance of the Q15 FIR decimator structure.
+ * @param[in] *pSrc points to the block of input data.
+ * @param[out] *pDst points to the block of output data
+ * @param[in] blockSize number of input samples to process per call.
+ * @return none
+ */
+
+ void arm_fir_decimate_fast_q15(
+ const arm_fir_decimate_instance_q15 * S,
+ q15_t * pSrc,
+ q15_t * pDst,
+ uint32_t blockSize);
+
+
+
+ /**
+ * @brief Initialization function for the Q15 FIR decimator.
+ * @param[in,out] *S points to an instance of the Q15 FIR decimator structure.
+ * @param[in] numTaps number of coefficients in the filter.
+ * @param[in] M decimation factor.
+ * @param[in] *pCoeffs points to the filter coefficients.
+ * @param[in] *pState points to the state buffer.
+ * @param[in] blockSize number of input samples to process per call.
+ * @return The function returns ARM_MATH_SUCCESS if initialization is successful or ARM_MATH_LENGTH_ERROR if
+ * <code>blockSize</code> is not a multiple of <code>M</code>.
+ */
+
+ arm_status arm_fir_decimate_init_q15(
+ arm_fir_decimate_instance_q15 * S,
+ uint16_t numTaps,
+ uint8_t M,
+ q15_t * pCoeffs,
+ q15_t * pState,
+ uint32_t blockSize);
+
+ /**
+ * @brief Processing function for the Q31 FIR decimator.
+ * @param[in] *S points to an instance of the Q31 FIR decimator structure.
+ * @param[in] *pSrc points to the block of input data.
+ * @param[out] *pDst points to the block of output data
+ * @param[in] blockSize number of input samples to process per call.
+ * @return none
+ */
+
+ void arm_fir_decimate_q31(
+ const arm_fir_decimate_instance_q31 * S,
+ q31_t * pSrc,
+ q31_t * pDst,
+ uint32_t blockSize);
+
+ /**
+ * @brief Processing function for the Q31 FIR decimator (fast variant) for Cortex-M3 and Cortex-M4.
+ * @param[in] *S points to an instance of the Q31 FIR decimator structure.
+ * @param[in] *pSrc points to the block of input data.
+ * @param[out] *pDst points to the block of output data
+ * @param[in] blockSize number of input samples to process per call.
+ * @return none
+ */
+
+ void arm_fir_decimate_fast_q31(
+ arm_fir_decimate_instance_q31 * S,
+ q31_t * pSrc,
+ q31_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Initialization function for the Q31 FIR decimator.
+ * @param[in,out] *S points to an instance of the Q31 FIR decimator structure.
+ * @param[in] numTaps number of coefficients in the filter.
+ * @param[in] M decimation factor.
+ * @param[in] *pCoeffs points to the filter coefficients.
+ * @param[in] *pState points to the state buffer.
+ * @param[in] blockSize number of input samples to process per call.
+ * @return The function returns ARM_MATH_SUCCESS if initialization is successful or ARM_MATH_LENGTH_ERROR if
+ * <code>blockSize</code> is not a multiple of <code>M</code>.
+ */
+
+ arm_status arm_fir_decimate_init_q31(
+ arm_fir_decimate_instance_q31 * S,
+ uint16_t numTaps,
+ uint8_t M,
+ q31_t * pCoeffs,
+ q31_t * pState,
+ uint32_t blockSize);
+
+
+
+ /**
+ * @brief Instance structure for the Q15 FIR interpolator.
+ */
+
+ typedef struct
+ {
+ uint8_t L; /**< upsample factor. */
+ uint16_t phaseLength; /**< length of each polyphase filter component. */
+ q15_t *pCoeffs; /**< points to the coefficient array. The array is of length L*phaseLength. */
+ q15_t *pState; /**< points to the state variable array. The array is of length blockSize+phaseLength-1. */
+ } arm_fir_interpolate_instance_q15;
+
+ /**
+ * @brief Instance structure for the Q31 FIR interpolator.
+ */
+
+ typedef struct
+ {
+ uint8_t L; /**< upsample factor. */
+ uint16_t phaseLength; /**< length of each polyphase filter component. */
+ q31_t *pCoeffs; /**< points to the coefficient array. The array is of length L*phaseLength. */
+ q31_t *pState; /**< points to the state variable array. The array is of length blockSize+phaseLength-1. */
+ } arm_fir_interpolate_instance_q31;
+
+ /**
+ * @brief Instance structure for the floating-point FIR interpolator.
+ */
+
+ typedef struct
+ {
+ uint8_t L; /**< upsample factor. */
+ uint16_t phaseLength; /**< length of each polyphase filter component. */
+ float32_t *pCoeffs; /**< points to the coefficient array. The array is of length L*phaseLength. */
+ float32_t *pState; /**< points to the state variable array. The array is of length phaseLength+numTaps-1. */
+ } arm_fir_interpolate_instance_f32;
+
+
+ /**
+ * @brief Processing function for the Q15 FIR interpolator.
+ * @param[in] *S points to an instance of the Q15 FIR interpolator structure.
+ * @param[in] *pSrc points to the block of input data.
+ * @param[out] *pDst points to the block of output data.
+ * @param[in] blockSize number of input samples to process per call.
+ * @return none.
+ */
+
+ void arm_fir_interpolate_q15(
+ const arm_fir_interpolate_instance_q15 * S,
+ q15_t * pSrc,
+ q15_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Initialization function for the Q15 FIR interpolator.
+ * @param[in,out] *S points to an instance of the Q15 FIR interpolator structure.
+ * @param[in] L upsample factor.
+ * @param[in] numTaps number of filter coefficients in the filter.
+ * @param[in] *pCoeffs points to the filter coefficient buffer.
+ * @param[in] *pState points to the state buffer.
+ * @param[in] blockSize number of input samples to process per call.
+ * @return The function returns ARM_MATH_SUCCESS if initialization is successful or ARM_MATH_LENGTH_ERROR if
+ * the filter length <code>numTaps</code> is not a multiple of the interpolation factor <code>L</code>.
+ */
+
+ arm_status arm_fir_interpolate_init_q15(
+ arm_fir_interpolate_instance_q15 * S,
+ uint8_t L,
+ uint16_t numTaps,
+ q15_t * pCoeffs,
+ q15_t * pState,
+ uint32_t blockSize);
+
+ /**
+ * @brief Processing function for the Q31 FIR interpolator.
+ * @param[in] *S points to an instance of the Q15 FIR interpolator structure.
+ * @param[in] *pSrc points to the block of input data.
+ * @param[out] *pDst points to the block of output data.
+ * @param[in] blockSize number of input samples to process per call.
+ * @return none.
+ */
+
+ void arm_fir_interpolate_q31(
+ const arm_fir_interpolate_instance_q31 * S,
+ q31_t * pSrc,
+ q31_t * pDst,
+ uint32_t blockSize);
+
+ /**
+ * @brief Initialization function for the Q31 FIR interpolator.
+ * @param[in,out] *S points to an instance of the Q31 FIR interpolator structure.
+ * @param[in] L upsample factor.
+ * @param[in] numTaps number of filter coefficients in the filter.
+ * @param[in] *pCoeffs points to the filter coefficient buffer.
+ * @param[in] *pState points to the state buffer.
+ * @param[in] blockSize number of input samples to process per call.
+ * @return The function returns ARM_MATH_SUCCESS if initialization is successful or ARM_MATH_LENGTH_ERROR if
+ * the filter length <code>numTaps</code> is not a multiple of the interpolation factor <code>L</code>.
+ */
+
+ arm_status arm_fir_interpolate_init_q31(
+ arm_fir_interpolate_instance_q31 * S,
+ uint8_t L,
+ uint16_t numTaps,
+ q31_t * pCoeffs,
+ q31_t * pState,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Processing function for the floating-point FIR interpolator.
+ * @param[in] *S points to an instance of the floating-point FIR interpolator structure.
+ * @param[in] *pSrc points to the block of input data.
+ * @param[out] *pDst points to the block of output data.
+ * @param[in] blockSize number of input samples to process per call.
+ * @return none.
+ */
+
+ void arm_fir_interpolate_f32(
+ const arm_fir_interpolate_instance_f32 * S,
+ float32_t * pSrc,
+ float32_t * pDst,
+ uint32_t blockSize);
+
+ /**
+ * @brief Initialization function for the floating-point FIR interpolator.
+ * @param[in,out] *S points to an instance of the floating-point FIR interpolator structure.
+ * @param[in] L upsample factor.
+ * @param[in] numTaps number of filter coefficients in the filter.
+ * @param[in] *pCoeffs points to the filter coefficient buffer.
+ * @param[in] *pState points to the state buffer.
+ * @param[in] blockSize number of input samples to process per call.
+ * @return The function returns ARM_MATH_SUCCESS if initialization is successful or ARM_MATH_LENGTH_ERROR if
+ * the filter length <code>numTaps</code> is not a multiple of the interpolation factor <code>L</code>.
+ */
+
+ arm_status arm_fir_interpolate_init_f32(
+ arm_fir_interpolate_instance_f32 * S,
+ uint8_t L,
+ uint16_t numTaps,
+ float32_t * pCoeffs,
+ float32_t * pState,
+ uint32_t blockSize);
+
+ /**
+ * @brief Instance structure for the high precision Q31 Biquad cascade filter.
+ */
+
+ typedef struct
+ {
+ uint8_t numStages; /**< number of 2nd order stages in the filter. Overall order is 2*numStages. */
+ q63_t *pState; /**< points to the array of state coefficients. The array is of length 4*numStages. */
+ q31_t *pCoeffs; /**< points to the array of coefficients. The array is of length 5*numStages. */
+ uint8_t postShift; /**< additional shift, in bits, applied to each output sample. */
+
+ } arm_biquad_cas_df1_32x64_ins_q31;
+
+
+ /**
+ * @param[in] *S points to an instance of the high precision Q31 Biquad cascade filter structure.
+ * @param[in] *pSrc points to the block of input data.
+ * @param[out] *pDst points to the block of output data
+ * @param[in] blockSize number of samples to process.
+ * @return none.
+ */
+
+ void arm_biquad_cas_df1_32x64_q31(
+ const arm_biquad_cas_df1_32x64_ins_q31 * S,
+ q31_t * pSrc,
+ q31_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @param[in,out] *S points to an instance of the high precision Q31 Biquad cascade filter structure.
+ * @param[in] numStages number of 2nd order stages in the filter.
+ * @param[in] *pCoeffs points to the filter coefficients.
+ * @param[in] *pState points to the state buffer.
+ * @param[in] postShift shift to be applied to the output. Varies according to the coefficients format
+ * @return none
+ */
+
+ void arm_biquad_cas_df1_32x64_init_q31(
+ arm_biquad_cas_df1_32x64_ins_q31 * S,
+ uint8_t numStages,
+ q31_t * pCoeffs,
+ q63_t * pState,
+ uint8_t postShift);
+
+
+
+ /**
+ * @brief Instance structure for the floating-point transposed direct form II Biquad cascade filter.
+ */
+
+ typedef struct
+ {
+ uint8_t numStages; /**< number of 2nd order stages in the filter. Overall order is 2*numStages. */
+ float32_t *pState; /**< points to the array of state coefficients. The array is of length 2*numStages. */
+ float32_t *pCoeffs; /**< points to the array of coefficients. The array is of length 5*numStages. */
+ } arm_biquad_cascade_df2T_instance_f32;
+
+
+ /**
+ * @brief Processing function for the floating-point transposed direct form II Biquad cascade filter.
+ * @param[in] *S points to an instance of the filter data structure.
+ * @param[in] *pSrc points to the block of input data.
+ * @param[out] *pDst points to the block of output data
+ * @param[in] blockSize number of samples to process.
+ * @return none.
+ */
+
+ void arm_biquad_cascade_df2T_f32(
+ const arm_biquad_cascade_df2T_instance_f32 * S,
+ float32_t * pSrc,
+ float32_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Initialization function for the floating-point transposed direct form II Biquad cascade filter.
+ * @param[in,out] *S points to an instance of the filter data structure.
+ * @param[in] numStages number of 2nd order stages in the filter.
+ * @param[in] *pCoeffs points to the filter coefficients.
+ * @param[in] *pState points to the state buffer.
+ * @return none
+ */
+
+ void arm_biquad_cascade_df2T_init_f32(
+ arm_biquad_cascade_df2T_instance_f32 * S,
+ uint8_t numStages,
+ float32_t * pCoeffs,
+ float32_t * pState);
+
+
+
+ /**
+ * @brief Instance structure for the Q15 FIR lattice filter.
+ */
+
+ typedef struct
+ {
+ uint16_t numStages; /**< number of filter stages. */
+ q15_t *pState; /**< points to the state variable array. The array is of length numStages. */
+ q15_t *pCoeffs; /**< points to the coefficient array. The array is of length numStages. */
+ } arm_fir_lattice_instance_q15;
+
+ /**
+ * @brief Instance structure for the Q31 FIR lattice filter.
+ */
+
+ typedef struct
+ {
+ uint16_t numStages; /**< number of filter stages. */
+ q31_t *pState; /**< points to the state variable array. The array is of length numStages. */
+ q31_t *pCoeffs; /**< points to the coefficient array. The array is of length numStages. */
+ } arm_fir_lattice_instance_q31;
+
+ /**
+ * @brief Instance structure for the floating-point FIR lattice filter.
+ */
+
+ typedef struct
+ {
+ uint16_t numStages; /**< number of filter stages. */
+ float32_t *pState; /**< points to the state variable array. The array is of length numStages. */
+ float32_t *pCoeffs; /**< points to the coefficient array. The array is of length numStages. */
+ } arm_fir_lattice_instance_f32;
+
+ /**
+ * @brief Initialization function for the Q15 FIR lattice filter.
+ * @param[in] *S points to an instance of the Q15 FIR lattice structure.
+ * @param[in] numStages number of filter stages.
+ * @param[in] *pCoeffs points to the coefficient buffer. The array is of length numStages.
+ * @param[in] *pState points to the state buffer. The array is of length numStages.
+ * @return none.
+ */
+
+ void arm_fir_lattice_init_q15(
+ arm_fir_lattice_instance_q15 * S,
+ uint16_t numStages,
+ q15_t * pCoeffs,
+ q15_t * pState);
+
+
+ /**
+ * @brief Processing function for the Q15 FIR lattice filter.
+ * @param[in] *S points to an instance of the Q15 FIR lattice structure.
+ * @param[in] *pSrc points to the block of input data.
+ * @param[out] *pDst points to the block of output data.
+ * @param[in] blockSize number of samples to process.
+ * @return none.
+ */
+ void arm_fir_lattice_q15(
+ const arm_fir_lattice_instance_q15 * S,
+ q15_t * pSrc,
+ q15_t * pDst,
+ uint32_t blockSize);
+
+ /**
+ * @brief Initialization function for the Q31 FIR lattice filter.
+ * @param[in] *S points to an instance of the Q31 FIR lattice structure.
+ * @param[in] numStages number of filter stages.
+ * @param[in] *pCoeffs points to the coefficient buffer. The array is of length numStages.
+ * @param[in] *pState points to the state buffer. The array is of length numStages.
+ * @return none.
+ */
+
+ void arm_fir_lattice_init_q31(
+ arm_fir_lattice_instance_q31 * S,
+ uint16_t numStages,
+ q31_t * pCoeffs,
+ q31_t * pState);
+
+
+ /**
+ * @brief Processing function for the Q31 FIR lattice filter.
+ * @param[in] *S points to an instance of the Q31 FIR lattice structure.
+ * @param[in] *pSrc points to the block of input data.
+ * @param[out] *pDst points to the block of output data
+ * @param[in] blockSize number of samples to process.
+ * @return none.
+ */
+
+ void arm_fir_lattice_q31(
+ const arm_fir_lattice_instance_q31 * S,
+ q31_t * pSrc,
+ q31_t * pDst,
+ uint32_t blockSize);
+
+/**
+ * @brief Initialization function for the floating-point FIR lattice filter.
+ * @param[in] *S points to an instance of the floating-point FIR lattice structure.
+ * @param[in] numStages number of filter stages.
+ * @param[in] *pCoeffs points to the coefficient buffer. The array is of length numStages.
+ * @param[in] *pState points to the state buffer. The array is of length numStages.
+ * @return none.
+ */
+
+ void arm_fir_lattice_init_f32(
+ arm_fir_lattice_instance_f32 * S,
+ uint16_t numStages,
+ float32_t * pCoeffs,
+ float32_t * pState);
+
+ /**
+ * @brief Processing function for the floating-point FIR lattice filter.
+ * @param[in] *S points to an instance of the floating-point FIR lattice structure.
+ * @param[in] *pSrc points to the block of input data.
+ * @param[out] *pDst points to the block of output data
+ * @param[in] blockSize number of samples to process.
+ * @return none.
+ */
+
+ void arm_fir_lattice_f32(
+ const arm_fir_lattice_instance_f32 * S,
+ float32_t * pSrc,
+ float32_t * pDst,
+ uint32_t blockSize);
+
+ /**
+ * @brief Instance structure for the Q15 IIR lattice filter.
+ */
+ typedef struct
+ {
+ uint16_t numStages; /**< number of stages in the filter. */
+ q15_t *pState; /**< points to the state variable array. The array is of length numStages+blockSize. */
+ q15_t *pkCoeffs; /**< points to the reflection coefficient array. The array is of length numStages. */
+ q15_t *pvCoeffs; /**< points to the ladder coefficient array. The array is of length numStages+1. */
+ } arm_iir_lattice_instance_q15;
+
+ /**
+ * @brief Instance structure for the Q31 IIR lattice filter.
+ */
+ typedef struct
+ {
+ uint16_t numStages; /**< number of stages in the filter. */
+ q31_t *pState; /**< points to the state variable array. The array is of length numStages+blockSize. */
+ q31_t *pkCoeffs; /**< points to the reflection coefficient array. The array is of length numStages. */
+ q31_t *pvCoeffs; /**< points to the ladder coefficient array. The array is of length numStages+1. */
+ } arm_iir_lattice_instance_q31;
+
+ /**
+ * @brief Instance structure for the floating-point IIR lattice filter.
+ */
+ typedef struct
+ {
+ uint16_t numStages; /**< number of stages in the filter. */
+ float32_t *pState; /**< points to the state variable array. The array is of length numStages+blockSize. */
+ float32_t *pkCoeffs; /**< points to the reflection coefficient array. The array is of length numStages. */
+ float32_t *pvCoeffs; /**< points to the ladder coefficient array. The array is of length numStages+1. */
+ } arm_iir_lattice_instance_f32;
+
+ /**
+ * @brief Processing function for the floating-point IIR lattice filter.
+ * @param[in] *S points to an instance of the floating-point IIR lattice structure.
+ * @param[in] *pSrc points to the block of input data.
+ * @param[out] *pDst points to the block of output data.
+ * @param[in] blockSize number of samples to process.
+ * @return none.
+ */
+
+ void arm_iir_lattice_f32(
+ const arm_iir_lattice_instance_f32 * S,
+ float32_t * pSrc,
+ float32_t * pDst,
+ uint32_t blockSize);
+
+ /**
+ * @brief Initialization function for the floating-point IIR lattice filter.
+ * @param[in] *S points to an instance of the floating-point IIR lattice structure.
+ * @param[in] numStages number of stages in the filter.
+ * @param[in] *pkCoeffs points to the reflection coefficient buffer. The array is of length numStages.
+ * @param[in] *pvCoeffs points to the ladder coefficient buffer. The array is of length numStages+1.
+ * @param[in] *pState points to the state buffer. The array is of length numStages+blockSize-1.
+ * @param[in] blockSize number of samples to process.
+ * @return none.
+ */
+
+ void arm_iir_lattice_init_f32(
+ arm_iir_lattice_instance_f32 * S,
+ uint16_t numStages,
+ float32_t *pkCoeffs,
+ float32_t *pvCoeffs,
+ float32_t *pState,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Processing function for the Q31 IIR lattice filter.
+ * @param[in] *S points to an instance of the Q31 IIR lattice structure.
+ * @param[in] *pSrc points to the block of input data.
+ * @param[out] *pDst points to the block of output data.
+ * @param[in] blockSize number of samples to process.
+ * @return none.
+ */
+
+ void arm_iir_lattice_q31(
+ const arm_iir_lattice_instance_q31 * S,
+ q31_t * pSrc,
+ q31_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Initialization function for the Q31 IIR lattice filter.
+ * @param[in] *S points to an instance of the Q31 IIR lattice structure.
+ * @param[in] numStages number of stages in the filter.
+ * @param[in] *pkCoeffs points to the reflection coefficient buffer. The array is of length numStages.
+ * @param[in] *pvCoeffs points to the ladder coefficient buffer. The array is of length numStages+1.
+ * @param[in] *pState points to the state buffer. The array is of length numStages+blockSize.
+ * @param[in] blockSize number of samples to process.
+ * @return none.
+ */
+
+ void arm_iir_lattice_init_q31(
+ arm_iir_lattice_instance_q31 * S,
+ uint16_t numStages,
+ q31_t *pkCoeffs,
+ q31_t *pvCoeffs,
+ q31_t *pState,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Processing function for the Q15 IIR lattice filter.
+ * @param[in] *S points to an instance of the Q15 IIR lattice structure.
+ * @param[in] *pSrc points to the block of input data.
+ * @param[out] *pDst points to the block of output data.
+ * @param[in] blockSize number of samples to process.
+ * @return none.
+ */
+
+ void arm_iir_lattice_q15(
+ const arm_iir_lattice_instance_q15 * S,
+ q15_t * pSrc,
+ q15_t * pDst,
+ uint32_t blockSize);
+
+
+/**
+ * @brief Initialization function for the Q15 IIR lattice filter.
+ * @param[in] *S points to an instance of the fixed-point Q15 IIR lattice structure.
+ * @param[in] numStages number of stages in the filter.
+ * @param[in] *pkCoeffs points to reflection coefficient buffer. The array is of length numStages.
+ * @param[in] *pvCoeffs points to ladder coefficient buffer. The array is of length numStages+1.
+ * @param[in] *pState points to state buffer. The array is of length numStages+blockSize.
+ * @param[in] blockSize number of samples to process per call.
+ * @return none.
+ */
+
+ void arm_iir_lattice_init_q15(
+ arm_iir_lattice_instance_q15 * S,
+ uint16_t numStages,
+ q15_t *pkCoeffs,
+ q15_t *pvCoeffs,
+ q15_t *pState,
+ uint32_t blockSize);
+
+ /**
+ * @brief Instance structure for the floating-point LMS filter.
+ */
+
+ typedef struct
+ {
+ uint16_t numTaps; /**< number of coefficients in the filter. */
+ float32_t *pState; /**< points to the state variable array. The array is of length numTaps+blockSize-1. */
+ float32_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps. */
+ float32_t mu; /**< step size that controls filter coefficient updates. */
+ } arm_lms_instance_f32;
+
+ /**
+ * @brief Processing function for floating-point LMS filter.
+ * @param[in] *S points to an instance of the floating-point LMS filter structure.
+ * @param[in] *pSrc points to the block of input data.
+ * @param[in] *pRef points to the block of reference data.
+ * @param[out] *pOut points to the block of output data.
+ * @param[out] *pErr points to the block of error data.
+ * @param[in] blockSize number of samples to process.
+ * @return none.
+ */
+
+ void arm_lms_f32(
+ const arm_lms_instance_f32 * S,
+ float32_t * pSrc,
+ float32_t * pRef,
+ float32_t * pOut,
+ float32_t * pErr,
+ uint32_t blockSize);
+
+ /**
+ * @brief Initialization function for floating-point LMS filter.
+ * @param[in] *S points to an instance of the floating-point LMS filter structure.
+ * @param[in] numTaps number of filter coefficients.
+ * @param[in] *pCoeffs points to the coefficient buffer.
+ * @param[in] *pState points to state buffer.
+ * @param[in] mu step size that controls filter coefficient updates.
+ * @param[in] blockSize number of samples to process.
+ * @return none.
+ */
+
+ void arm_lms_init_f32(
+ arm_lms_instance_f32 * S,
+ uint16_t numTaps,
+ float32_t * pCoeffs,
+ float32_t * pState,
+ float32_t mu,
+ uint32_t blockSize);
+
+ /**
+ * @brief Instance structure for the Q15 LMS filter.
+ */
+
+ typedef struct
+ {
+ uint16_t numTaps; /**< number of coefficients in the filter. */
+ q15_t *pState; /**< points to the state variable array. The array is of length numTaps+blockSize-1. */
+ q15_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps. */
+ q15_t mu; /**< step size that controls filter coefficient updates. */
+ uint32_t postShift; /**< bit shift applied to coefficients. */
+ } arm_lms_instance_q15;
+
+
+ /**
+ * @brief Initialization function for the Q15 LMS filter.
+ * @param[in] *S points to an instance of the Q15 LMS filter structure.
+ * @param[in] numTaps number of filter coefficients.
+ * @param[in] *pCoeffs points to the coefficient buffer.
+ * @param[in] *pState points to the state buffer.
+ * @param[in] mu step size that controls filter coefficient updates.
+ * @param[in] blockSize number of samples to process.
+ * @param[in] postShift bit shift applied to coefficients.
+ * @return none.
+ */
+
+ void arm_lms_init_q15(
+ arm_lms_instance_q15 * S,
+ uint16_t numTaps,
+ q15_t * pCoeffs,
+ q15_t * pState,
+ q15_t mu,
+ uint32_t blockSize,
+ uint32_t postShift);
+
+ /**
+ * @brief Processing function for Q15 LMS filter.
+ * @param[in] *S points to an instance of the Q15 LMS filter structure.
+ * @param[in] *pSrc points to the block of input data.
+ * @param[in] *pRef points to the block of reference data.
+ * @param[out] *pOut points to the block of output data.
+ * @param[out] *pErr points to the block of error data.
+ * @param[in] blockSize number of samples to process.
+ * @return none.
+ */
+
+ void arm_lms_q15(
+ const arm_lms_instance_q15 * S,
+ q15_t * pSrc,
+ q15_t * pRef,
+ q15_t * pOut,
+ q15_t * pErr,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Instance structure for the Q31 LMS filter.
+ */
+
+ typedef struct
+ {
+ uint16_t numTaps; /**< number of coefficients in the filter. */
+ q31_t *pState; /**< points to the state variable array. The array is of length numTaps+blockSize-1. */
+ q31_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps. */
+ q31_t mu; /**< step size that controls filter coefficient updates. */
+ uint32_t postShift; /**< bit shift applied to coefficients. */
+
+ } arm_lms_instance_q31;
+
+ /**
+ * @brief Processing function for Q31 LMS filter.
+ * @param[in] *S points to an instance of the Q15 LMS filter structure.
+ * @param[in] *pSrc points to the block of input data.
+ * @param[in] *pRef points to the block of reference data.
+ * @param[out] *pOut points to the block of output data.
+ * @param[out] *pErr points to the block of error data.
+ * @param[in] blockSize number of samples to process.
+ * @return none.
+ */
+
+ void arm_lms_q31(
+ const arm_lms_instance_q31 * S,
+ q31_t * pSrc,
+ q31_t * pRef,
+ q31_t * pOut,
+ q31_t * pErr,
+ uint32_t blockSize);
+
+ /**
+ * @brief Initialization function for Q31 LMS filter.
+ * @param[in] *S points to an instance of the Q31 LMS filter structure.
+ * @param[in] numTaps number of filter coefficients.
+ * @param[in] *pCoeffs points to coefficient buffer.
+ * @param[in] *pState points to state buffer.
+ * @param[in] mu step size that controls filter coefficient updates.
+ * @param[in] blockSize number of samples to process.
+ * @param[in] postShift bit shift applied to coefficients.
+ * @return none.
+ */
+
+ void arm_lms_init_q31(
+ arm_lms_instance_q31 * S,
+ uint16_t numTaps,
+ q31_t *pCoeffs,
+ q31_t *pState,
+ q31_t mu,
+ uint32_t blockSize,
+ uint32_t postShift);
+
+ /**
+ * @brief Instance structure for the floating-point normalized LMS filter.
+ */
+
+ typedef struct
+ {
+ uint16_t numTaps; /**< number of coefficients in the filter. */
+ float32_t *pState; /**< points to the state variable array. The array is of length numTaps+blockSize-1. */
+ float32_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps. */
+ float32_t mu; /**< step size that control filter coefficient updates. */
+ float32_t energy; /**< saves previous frame energy. */
+ float32_t x0; /**< saves previous input sample. */
+ } arm_lms_norm_instance_f32;
+
+ /**
+ * @brief Processing function for floating-point normalized LMS filter.
+ * @param[in] *S points to an instance of the floating-point normalized LMS filter structure.
+ * @param[in] *pSrc points to the block of input data.
+ * @param[in] *pRef points to the block of reference data.
+ * @param[out] *pOut points to the block of output data.
+ * @param[out] *pErr points to the block of error data.
+ * @param[in] blockSize number of samples to process.
+ * @return none.
+ */
+
+ void arm_lms_norm_f32(
+ arm_lms_norm_instance_f32 * S,
+ float32_t * pSrc,
+ float32_t * pRef,
+ float32_t * pOut,
+ float32_t * pErr,
+ uint32_t blockSize);
+
+ /**
+ * @brief Initialization function for floating-point normalized LMS filter.
+ * @param[in] *S points to an instance of the floating-point LMS filter structure.
+ * @param[in] numTaps number of filter coefficients.
+ * @param[in] *pCoeffs points to coefficient buffer.
+ * @param[in] *pState points to state buffer.
+ * @param[in] mu step size that controls filter coefficient updates.
+ * @param[in] blockSize number of samples to process.
+ * @return none.
+ */
+
+ void arm_lms_norm_init_f32(
+ arm_lms_norm_instance_f32 * S,
+ uint16_t numTaps,
+ float32_t * pCoeffs,
+ float32_t * pState,
+ float32_t mu,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Instance structure for the Q31 normalized LMS filter.
+ */
+ typedef struct
+ {
+ uint16_t numTaps; /**< number of coefficients in the filter. */
+ q31_t *pState; /**< points to the state variable array. The array is of length numTaps+blockSize-1. */
+ q31_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps. */
+ q31_t mu; /**< step size that controls filter coefficient updates. */
+ uint8_t postShift; /**< bit shift applied to coefficients. */
+ q31_t *recipTable; /**< points to the reciprocal initial value table. */
+ q31_t energy; /**< saves previous frame energy. */
+ q31_t x0; /**< saves previous input sample. */
+ } arm_lms_norm_instance_q31;
+
+ /**
+ * @brief Processing function for Q31 normalized LMS filter.
+ * @param[in] *S points to an instance of the Q31 normalized LMS filter structure.
+ * @param[in] *pSrc points to the block of input data.
+ * @param[in] *pRef points to the block of reference data.
+ * @param[out] *pOut points to the block of output data.
+ * @param[out] *pErr points to the block of error data.
+ * @param[in] blockSize number of samples to process.
+ * @return none.
+ */
+
+ void arm_lms_norm_q31(
+ arm_lms_norm_instance_q31 * S,
+ q31_t * pSrc,
+ q31_t * pRef,
+ q31_t * pOut,
+ q31_t * pErr,
+ uint32_t blockSize);
+
+ /**
+ * @brief Initialization function for Q31 normalized LMS filter.
+ * @param[in] *S points to an instance of the Q31 normalized LMS filter structure.
+ * @param[in] numTaps number of filter coefficients.
+ * @param[in] *pCoeffs points to coefficient buffer.
+ * @param[in] *pState points to state buffer.
+ * @param[in] mu step size that controls filter coefficient updates.
+ * @param[in] blockSize number of samples to process.
+ * @param[in] postShift bit shift applied to coefficients.
+ * @return none.
+ */
+
+ void arm_lms_norm_init_q31(
+ arm_lms_norm_instance_q31 * S,
+ uint16_t numTaps,
+ q31_t * pCoeffs,
+ q31_t * pState,
+ q31_t mu,
+ uint32_t blockSize,
+ uint8_t postShift);
+
+ /**
+ * @brief Instance structure for the Q15 normalized LMS filter.
+ */
+
+ typedef struct
+ {
+ uint16_t numTaps; /**< Number of coefficients in the filter. */
+ q15_t *pState; /**< points to the state variable array. The array is of length numTaps+blockSize-1. */
+ q15_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps. */
+ q15_t mu; /**< step size that controls filter coefficient updates. */
+ uint8_t postShift; /**< bit shift applied to coefficients. */
+ q15_t *recipTable; /**< Points to the reciprocal initial value table. */
+ q15_t energy; /**< saves previous frame energy. */
+ q15_t x0; /**< saves previous input sample. */
+ } arm_lms_norm_instance_q15;
+
+ /**
+ * @brief Processing function for Q15 normalized LMS filter.
+ * @param[in] *S points to an instance of the Q15 normalized LMS filter structure.
+ * @param[in] *pSrc points to the block of input data.
+ * @param[in] *pRef points to the block of reference data.
+ * @param[out] *pOut points to the block of output data.
+ * @param[out] *pErr points to the block of error data.
+ * @param[in] blockSize number of samples to process.
+ * @return none.
+ */
+
+ void arm_lms_norm_q15(
+ arm_lms_norm_instance_q15 * S,
+ q15_t * pSrc,
+ q15_t * pRef,
+ q15_t * pOut,
+ q15_t * pErr,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Initialization function for Q15 normalized LMS filter.
+ * @param[in] *S points to an instance of the Q15 normalized LMS filter structure.
+ * @param[in] numTaps number of filter coefficients.
+ * @param[in] *pCoeffs points to coefficient buffer.
+ * @param[in] *pState points to state buffer.
+ * @param[in] mu step size that controls filter coefficient updates.
+ * @param[in] blockSize number of samples to process.
+ * @param[in] postShift bit shift applied to coefficients.
+ * @return none.
+ */
+
+ void arm_lms_norm_init_q15(
+ arm_lms_norm_instance_q15 * S,
+ uint16_t numTaps,
+ q15_t * pCoeffs,
+ q15_t * pState,
+ q15_t mu,
+ uint32_t blockSize,
+ uint8_t postShift);
+
+ /**
+ * @brief Correlation of floating-point sequences.
+ * @param[in] *pSrcA points to the first input sequence.
+ * @param[in] srcALen length of the first input sequence.
+ * @param[in] *pSrcB points to the second input sequence.
+ * @param[in] srcBLen length of the second input sequence.
+ * @param[out] *pDst points to the block of output data Length 2 * max(srcALen, srcBLen) - 1.
+ * @return none.
+ */
+
+ void arm_correlate_f32(
+ float32_t * pSrcA,
+ uint32_t srcALen,
+ float32_t * pSrcB,
+ uint32_t srcBLen,
+ float32_t * pDst);
+
+ /**
+ * @brief Correlation of Q15 sequences.
+ * @param[in] *pSrcA points to the first input sequence.
+ * @param[in] srcALen length of the first input sequence.
+ * @param[in] *pSrcB points to the second input sequence.
+ * @param[in] srcBLen length of the second input sequence.
+ * @param[out] *pDst points to the block of output data Length 2 * max(srcALen, srcBLen) - 1.
+ * @return none.
+ */
+
+ void arm_correlate_q15(
+ q15_t * pSrcA,
+ uint32_t srcALen,
+ q15_t * pSrcB,
+ uint32_t srcBLen,
+ q15_t * pDst);
+
+ /**
+ * @brief Correlation of Q15 sequences (fast version) for Cortex-M3 and Cortex-M4.
+ * @param[in] *pSrcA points to the first input sequence.
+ * @param[in] srcALen length of the first input sequence.
+ * @param[in] *pSrcB points to the second input sequence.
+ * @param[in] srcBLen length of the second input sequence.
+ * @param[out] *pDst points to the block of output data Length 2 * max(srcALen, srcBLen) - 1.
+ * @return none.
+ */
+
+ void arm_correlate_fast_q15(
+ q15_t * pSrcA,
+ uint32_t srcALen,
+ q15_t * pSrcB,
+ uint32_t srcBLen,
+ q15_t * pDst);
+
+ /**
+ * @brief Correlation of Q31 sequences.
+ * @param[in] *pSrcA points to the first input sequence.
+ * @param[in] srcALen length of the first input sequence.
+ * @param[in] *pSrcB points to the second input sequence.
+ * @param[in] srcBLen length of the second input sequence.
+ * @param[out] *pDst points to the block of output data Length 2 * max(srcALen, srcBLen) - 1.
+ * @return none.
+ */
+
+ void arm_correlate_q31(
+ q31_t * pSrcA,
+ uint32_t srcALen,
+ q31_t * pSrcB,
+ uint32_t srcBLen,
+ q31_t * pDst);
+
+ /**
+ * @brief Correlation of Q31 sequences (fast version) for Cortex-M3 and Cortex-M4
+ * @param[in] *pSrcA points to the first input sequence.
+ * @param[in] srcALen length of the first input sequence.
+ * @param[in] *pSrcB points to the second input sequence.
+ * @param[in] srcBLen length of the second input sequence.
+ * @param[out] *pDst points to the block of output data Length 2 * max(srcALen, srcBLen) - 1.
+ * @return none.
+ */
+
+ void arm_correlate_fast_q31(
+ q31_t * pSrcA,
+ uint32_t srcALen,
+ q31_t * pSrcB,
+ uint32_t srcBLen,
+ q31_t * pDst);
+
+ /**
+ * @brief Correlation of Q7 sequences.
+ * @param[in] *pSrcA points to the first input sequence.
+ * @param[in] srcALen length of the first input sequence.
+ * @param[in] *pSrcB points to the second input sequence.
+ * @param[in] srcBLen length of the second input sequence.
+ * @param[out] *pDst points to the block of output data Length 2 * max(srcALen, srcBLen) - 1.
+ * @return none.
+ */
+
+ void arm_correlate_q7(
+ q7_t * pSrcA,
+ uint32_t srcALen,
+ q7_t * pSrcB,
+ uint32_t srcBLen,
+ q7_t * pDst);
+
+ /**
+ * @brief Instance structure for the floating-point sparse FIR filter.
+ */
+ typedef struct
+ {
+ uint16_t numTaps; /**< number of coefficients in the filter. */
+ uint16_t stateIndex; /**< state buffer index. Points to the oldest sample in the state buffer. */
+ float32_t *pState; /**< points to the state buffer array. The array is of length maxDelay+blockSize-1. */
+ float32_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps.*/
+ uint16_t maxDelay; /**< maximum offset specified by the pTapDelay array. */
+ int32_t *pTapDelay; /**< points to the array of delay values. The array is of length numTaps. */
+ } arm_fir_sparse_instance_f32;
+
+ /**
+ * @brief Instance structure for the Q31 sparse FIR filter.
+ */
+
+ typedef struct
+ {
+ uint16_t numTaps; /**< number of coefficients in the filter. */
+ uint16_t stateIndex; /**< state buffer index. Points to the oldest sample in the state buffer. */
+ q31_t *pState; /**< points to the state buffer array. The array is of length maxDelay+blockSize-1. */
+ q31_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps.*/
+ uint16_t maxDelay; /**< maximum offset specified by the pTapDelay array. */
+ int32_t *pTapDelay; /**< points to the array of delay values. The array is of length numTaps. */
+ } arm_fir_sparse_instance_q31;
+
+ /**
+ * @brief Instance structure for the Q15 sparse FIR filter.
+ */
+
+ typedef struct
+ {
+ uint16_t numTaps; /**< number of coefficients in the filter. */
+ uint16_t stateIndex; /**< state buffer index. Points to the oldest sample in the state buffer. */
+ q15_t *pState; /**< points to the state buffer array. The array is of length maxDelay+blockSize-1. */
+ q15_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps.*/
+ uint16_t maxDelay; /**< maximum offset specified by the pTapDelay array. */
+ int32_t *pTapDelay; /**< points to the array of delay values. The array is of length numTaps. */
+ } arm_fir_sparse_instance_q15;
+
+ /**
+ * @brief Instance structure for the Q7 sparse FIR filter.
+ */
+
+ typedef struct
+ {
+ uint16_t numTaps; /**< number of coefficients in the filter. */
+ uint16_t stateIndex; /**< state buffer index. Points to the oldest sample in the state buffer. */
+ q7_t *pState; /**< points to the state buffer array. The array is of length maxDelay+blockSize-1. */
+ q7_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps.*/
+ uint16_t maxDelay; /**< maximum offset specified by the pTapDelay array. */
+ int32_t *pTapDelay; /**< points to the array of delay values. The array is of length numTaps. */
+ } arm_fir_sparse_instance_q7;
+
+ /**
+ * @brief Processing function for the floating-point sparse FIR filter.
+ * @param[in] *S points to an instance of the floating-point sparse FIR structure.
+ * @param[in] *pSrc points to the block of input data.
+ * @param[out] *pDst points to the block of output data
+ * @param[in] *pScratchIn points to a temporary buffer of size blockSize.
+ * @param[in] blockSize number of input samples to process per call.
+ * @return none.
+ */
+
+ void arm_fir_sparse_f32(
+ arm_fir_sparse_instance_f32 * S,
+ float32_t * pSrc,
+ float32_t * pDst,
+ float32_t * pScratchIn,
+ uint32_t blockSize);
+
+ /**
+ * @brief Initialization function for the floating-point sparse FIR filter.
+ * @param[in,out] *S points to an instance of the floating-point sparse FIR structure.
+ * @param[in] numTaps number of nonzero coefficients in the filter.
+ * @param[in] *pCoeffs points to the array of filter coefficients.
+ * @param[in] *pState points to the state buffer.
+ * @param[in] *pTapDelay points to the array of offset times.
+ * @param[in] maxDelay maximum offset time supported.
+ * @param[in] blockSize number of samples that will be processed per block.
+ * @return none
+ */
+
+ void arm_fir_sparse_init_f32(
+ arm_fir_sparse_instance_f32 * S,
+ uint16_t numTaps,
+ float32_t * pCoeffs,
+ float32_t * pState,
+ int32_t * pTapDelay,
+ uint16_t maxDelay,
+ uint32_t blockSize);
+
+ /**
+ * @brief Processing function for the Q31 sparse FIR filter.
+ * @param[in] *S points to an instance of the Q31 sparse FIR structure.
+ * @param[in] *pSrc points to the block of input data.
+ * @param[out] *pDst points to the block of output data
+ * @param[in] *pScratchIn points to a temporary buffer of size blockSize.
+ * @param[in] blockSize number of input samples to process per call.
+ * @return none.
+ */
+
+ void arm_fir_sparse_q31(
+ arm_fir_sparse_instance_q31 * S,
+ q31_t * pSrc,
+ q31_t * pDst,
+ q31_t * pScratchIn,
+ uint32_t blockSize);
+
+ /**
+ * @brief Initialization function for the Q31 sparse FIR filter.
+ * @param[in,out] *S points to an instance of the Q31 sparse FIR structure.
+ * @param[in] numTaps number of nonzero coefficients in the filter.
+ * @param[in] *pCoeffs points to the array of filter coefficients.
+ * @param[in] *pState points to the state buffer.
+ * @param[in] *pTapDelay points to the array of offset times.
+ * @param[in] maxDelay maximum offset time supported.
+ * @param[in] blockSize number of samples that will be processed per block.
+ * @return none
+ */
+
+ void arm_fir_sparse_init_q31(
+ arm_fir_sparse_instance_q31 * S,
+ uint16_t numTaps,
+ q31_t * pCoeffs,
+ q31_t * pState,
+ int32_t * pTapDelay,
+ uint16_t maxDelay,
+ uint32_t blockSize);
+
+ /**
+ * @brief Processing function for the Q15 sparse FIR filter.
+ * @param[in] *S points to an instance of the Q15 sparse FIR structure.
+ * @param[in] *pSrc points to the block of input data.
+ * @param[out] *pDst points to the block of output data
+ * @param[in] *pScratchIn points to a temporary buffer of size blockSize.
+ * @param[in] *pScratchOut points to a temporary buffer of size blockSize.
+ * @param[in] blockSize number of input samples to process per call.
+ * @return none.
+ */
+
+ void arm_fir_sparse_q15(
+ arm_fir_sparse_instance_q15 * S,
+ q15_t * pSrc,
+ q15_t * pDst,
+ q15_t * pScratchIn,
+ q31_t * pScratchOut,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Initialization function for the Q15 sparse FIR filter.
+ * @param[in,out] *S points to an instance of the Q15 sparse FIR structure.
+ * @param[in] numTaps number of nonzero coefficients in the filter.
+ * @param[in] *pCoeffs points to the array of filter coefficients.
+ * @param[in] *pState points to the state buffer.
+ * @param[in] *pTapDelay points to the array of offset times.
+ * @param[in] maxDelay maximum offset time supported.
+ * @param[in] blockSize number of samples that will be processed per block.
+ * @return none
+ */
+
+ void arm_fir_sparse_init_q15(
+ arm_fir_sparse_instance_q15 * S,
+ uint16_t numTaps,
+ q15_t * pCoeffs,
+ q15_t * pState,
+ int32_t * pTapDelay,
+ uint16_t maxDelay,
+ uint32_t blockSize);
+
+ /**
+ * @brief Processing function for the Q7 sparse FIR filter.
+ * @param[in] *S points to an instance of the Q7 sparse FIR structure.
+ * @param[in] *pSrc points to the block of input data.
+ * @param[out] *pDst points to the block of output data
+ * @param[in] *pScratchIn points to a temporary buffer of size blockSize.
+ * @param[in] *pScratchOut points to a temporary buffer of size blockSize.
+ * @param[in] blockSize number of input samples to process per call.
+ * @return none.
+ */
+
+ void arm_fir_sparse_q7(
+ arm_fir_sparse_instance_q7 * S,
+ q7_t * pSrc,
+ q7_t * pDst,
+ q7_t * pScratchIn,
+ q31_t * pScratchOut,
+ uint32_t blockSize);
+
+ /**
+ * @brief Initialization function for the Q7 sparse FIR filter.
+ * @param[in,out] *S points to an instance of the Q7 sparse FIR structure.
+ * @param[in] numTaps number of nonzero coefficients in the filter.
+ * @param[in] *pCoeffs points to the array of filter coefficients.
+ * @param[in] *pState points to the state buffer.
+ * @param[in] *pTapDelay points to the array of offset times.
+ * @param[in] maxDelay maximum offset time supported.
+ * @param[in] blockSize number of samples that will be processed per block.
+ * @return none
+ */
+
+ void arm_fir_sparse_init_q7(
+ arm_fir_sparse_instance_q7 * S,
+ uint16_t numTaps,
+ q7_t * pCoeffs,
+ q7_t * pState,
+ int32_t *pTapDelay,
+ uint16_t maxDelay,
+ uint32_t blockSize);
+
+
+ /*
+ * @brief Floating-point sin_cos function.
+ * @param[in] theta input value in degrees
+ * @param[out] *pSinVal points to the processed sine output.
+ * @param[out] *pCosVal points to the processed cos output.
+ * @return none.
+ */
+
+ void arm_sin_cos_f32(
+ float32_t theta,
+ float32_t *pSinVal,
+ float32_t *pCcosVal);
+
+ /*
+ * @brief Q31 sin_cos function.
+ * @param[in] theta scaled input value in degrees
+ * @param[out] *pSinVal points to the processed sine output.
+ * @param[out] *pCosVal points to the processed cosine output.
+ * @return none.
+ */
+
+ void arm_sin_cos_q31(
+ q31_t theta,
+ q31_t *pSinVal,
+ q31_t *pCosVal);
+
+
+ /**
+ * @brief Floating-point complex conjugate.
+ * @param[in] *pSrc points to the input vector
+ * @param[out] *pDst points to the output vector
+ * @param[in] numSamples number of complex samples in each vector
+ * @return none.
+ */
+
+ void arm_cmplx_conj_f32(
+ float32_t * pSrc,
+ float32_t * pDst,
+ uint32_t numSamples);
+
+ /**
+ * @brief Q31 complex conjugate.
+ * @param[in] *pSrc points to the input vector
+ * @param[out] *pDst points to the output vector
+ * @param[in] numSamples number of complex samples in each vector
+ * @return none.
+ */
+
+ void arm_cmplx_conj_q31(
+ q31_t * pSrc,
+ q31_t * pDst,
+ uint32_t numSamples);
+
+ /**
+ * @brief Q15 complex conjugate.
+ * @param[in] *pSrc points to the input vector
+ * @param[out] *pDst points to the output vector
+ * @param[in] numSamples number of complex samples in each vector
+ * @return none.
+ */
+
+ void arm_cmplx_conj_q15(
+ q15_t * pSrc,
+ q15_t * pDst,
+ uint32_t numSamples);
+
+
+
+ /**
+ * @brief Floating-point complex magnitude squared
+ * @param[in] *pSrc points to the complex input vector
+ * @param[out] *pDst points to the real output vector
+ * @param[in] numSamples number of complex samples in the input vector
+ * @return none.
+ */
+
+ void arm_cmplx_mag_squared_f32(
+ float32_t * pSrc,
+ float32_t * pDst,
+ uint32_t numSamples);
+
+ /**
+ * @brief Q31 complex magnitude squared
+ * @param[in] *pSrc points to the complex input vector
+ * @param[out] *pDst points to the real output vector
+ * @param[in] numSamples number of complex samples in the input vector
+ * @return none.
+ */
+
+ void arm_cmplx_mag_squared_q31(
+ q31_t * pSrc,
+ q31_t * pDst,
+ uint32_t numSamples);
+
+ /**
+ * @brief Q15 complex magnitude squared
+ * @param[in] *pSrc points to the complex input vector
+ * @param[out] *pDst points to the real output vector
+ * @param[in] numSamples number of complex samples in the input vector
+ * @return none.
+ */
+
+ void arm_cmplx_mag_squared_q15(
+ q15_t * pSrc,
+ q15_t * pDst,
+ uint32_t numSamples);
+
+
+ /**
+ * @ingroup groupController
+ */
+
+ /**
+ * @defgroup PID PID Motor Control
+ *
+ * A Proportional Integral Derivative (PID) controller is a generic feedback control
+ * loop mechanism widely used in industrial control systems.
+ * A PID controller is the most commonly used type of feedback controller.
+ *
+ * This set of functions implements (PID) controllers
+ * for Q15, Q31, and floating-point data types. The functions operate on a single sample
+ * of data and each call to the function returns a single processed value.
+ * <code>S</code> points to an instance of the PID control data structure. <code>in</code>
+ * is the input sample value. The functions return the output value.
+ *
+ * \par Algorithm:
+ * <pre>
+ * y[n] = y[n-1] + A0 * x[n] + A1 * x[n-1] + A2 * x[n-2]
+ * A0 = Kp + Ki + Kd
+ * A1 = (-Kp ) - (2 * Kd )
+ * A2 = Kd </pre>
+ *
+ * \par
+ * where \c Kp is proportional constant, \c Ki is Integral constant and \c Kd is Derivative constant
+ *
+ * \par
+ * \image html PID.gif "Proportional Integral Derivative Controller"
+ *
+ * \par
+ * The PID controller calculates an "error" value as the difference between
+ * the measured output and the reference input.
+ * The controller attempts to minimize the error by adjusting the process control inputs.
+ * The proportional value determines the reaction to the current error,
+ * the integral value determines the reaction based on the sum of recent errors,
+ * and the derivative value determines the reaction based on the rate at which the error has been changing.
+ *
+ * \par Instance Structure
+ * The Gains A0, A1, A2 and state variables for a PID controller are stored together in an instance data structure.
+ * A separate instance structure must be defined for each PID Controller.
+ * There are separate instance structure declarations for each of the 3 supported data types.
+ *
+ * \par Reset Functions
+ * There is also an associated reset function for each data type which clears the state array.
+ *
+ * \par Initialization Functions
+ * There is also an associated initialization function for each data type.
+ * The initialization function performs the following operations:
+ * - Initializes the Gains A0, A1, A2 from Kp,Ki, Kd gains.
+ * - Zeros out the values in the state buffer.
+ *
+ * \par
+ * Instance structure cannot be placed into a const data section and it is recommended to use the initialization function.
+ *
+ * \par Fixed-Point Behavior
+ * Care must be taken when using the fixed-point versions of the PID Controller functions.
+ * In particular, the overflow and saturation behavior of the accumulator used in each function must be considered.
+ * Refer to the function specific documentation below for usage guidelines.
+ */
+
+ /**
+ * @addtogroup PID
+ * @{
+ */
+
+ /**
+ * @brief Process function for the floating-point PID Control.
+ * @param[in,out] *S is an instance of the floating-point PID Control structure
+ * @param[in] in input sample to process
+ * @return out processed output sample.
+ */
+
+
+ static __INLINE float32_t arm_pid_f32(
+ arm_pid_instance_f32 * S,
+ float32_t in)
+ {
+ float32_t out;
+
+ /* y[n] = y[n-1] + A0 * x[n] + A1 * x[n-1] + A2 * x[n-2] */
+ out = (S->A0 * in) +
+ (S->A1 * S->state[0]) + (S->A2 * S->state[1]) + (S->state[2]);
+
+ /* Update state */
+ S->state[1] = S->state[0];
+ S->state[0] = in;
+ S->state[2] = out;
+
+ /* return to application */
+ return (out);
+
+ }
+
+ /**
+ * @brief Process function for the Q31 PID Control.
+ * @param[in,out] *S points to an instance of the Q31 PID Control structure
+ * @param[in] in input sample to process
+ * @return out processed output sample.
+ *
+ * <b>Scaling and Overflow Behavior:</b>
+ * \par
+ * The function is implemented using an internal 64-bit accumulator.
+ * The accumulator has a 2.62 format and maintains full precision of the intermediate multiplication results but provides only a single guard bit.
+ * Thus, if the accumulator result overflows it wraps around rather than clip.
+ * In order to avoid overflows completely the input signal must be scaled down by 2 bits as there are four additions.
+ * After all multiply-accumulates are performed, the 2.62 accumulator is truncated to 1.32 format and then saturated to 1.31 format.
+ */
+
+ static __INLINE q31_t arm_pid_q31(
+ arm_pid_instance_q31 * S,
+ q31_t in)
+ {
+ q63_t acc;
+ q31_t out;
+
+ /* acc = A0 * x[n] */
+ acc = (q63_t) S->A0 * in;
+
+ /* acc += A1 * x[n-1] */
+ acc += (q63_t) S->A1 * S->state[0];
+
+ /* acc += A2 * x[n-2] */
+ acc += (q63_t) S->A2 * S->state[1];
+
+ /* convert output to 1.31 format to add y[n-1] */
+ out = (q31_t) (acc >> 31u);
+
+ /* out += y[n-1] */
+ out += S->state[2];
+
+ /* Update state */
+ S->state[1] = S->state[0];
+ S->state[0] = in;
+ S->state[2] = out;
+
+ /* return to application */
+ return (out);
+
+ }
+
+ /**
+ * @brief Process function for the Q15 PID Control.
+ * @param[in,out] *S points to an instance of the Q15 PID Control structure
+ * @param[in] in input sample to process
+ * @return out processed output sample.
+ *
+ * <b>Scaling and Overflow Behavior:</b>
+ * \par
+ * The function is implemented using a 64-bit internal accumulator.
+ * Both Gains and state variables are represented in 1.15 format and multiplications yield a 2.30 result.
+ * The 2.30 intermediate results are accumulated in a 64-bit accumulator in 34.30 format.
+ * There is no risk of internal overflow with this approach and the full precision of intermediate multiplications is preserved.
+ * After all additions have been performed, the accumulator is truncated to 34.15 format by discarding low 15 bits.
+ * Lastly, the accumulator is saturated to yield a result in 1.15 format.
+ */
+
+ static __INLINE q15_t arm_pid_q15(
+ arm_pid_instance_q15 * S,
+ q15_t in)
+ {
+ q63_t acc;
+ q15_t out;
+
+ /* Implementation of PID controller */
+
+ #ifdef ARM_MATH_CM0
+
+ /* acc = A0 * x[n] */
+ acc = ((q31_t) S->A0 )* in ;
+
+ #else
+
+ /* acc = A0 * x[n] */
+ acc = (q31_t) __SMUAD(S->A0, in);
+
+ #endif
+
+ #ifdef ARM_MATH_CM0
+
+ /* acc += A1 * x[n-1] + A2 * x[n-2] */
+ acc += (q31_t) S->A1 * S->state[0] ;
+ acc += (q31_t) S->A2 * S->state[1] ;
+
+ #else
+
+ /* acc += A1 * x[n-1] + A2 * x[n-2] */
+ acc = __SMLALD(S->A1, (q31_t)__SIMD32(S->state), acc);
+
+ #endif
+
+ /* acc += y[n-1] */
+ acc += (q31_t) S->state[2] << 15;
+
+ /* saturate the output */
+ out = (q15_t) (__SSAT((acc >> 15), 16));
+
+ /* Update state */
+ S->state[1] = S->state[0];
+ S->state[0] = in;
+ S->state[2] = out;
+
+ /* return to application */
+ return (out);
+
+ }
+
+ /**
+ * @} end of PID group
+ */
+
+
+ /**
+ * @brief Floating-point matrix inverse.
+ * @param[in] *src points to the instance of the input floating-point matrix structure.
+ * @param[out] *dst points to the instance of the output floating-point matrix structure.
+ * @return The function returns ARM_MATH_SIZE_MISMATCH, if the dimensions do not match.
+ * If the input matrix is singular (does not have an inverse), then the algorithm terminates and returns error status ARM_MATH_SINGULAR.
+ */
+
+ arm_status arm_mat_inverse_f32(
+ const arm_matrix_instance_f32 * src,
+ arm_matrix_instance_f32 * dst);
+
+
+
+ /**
+ * @ingroup groupController
+ */
+
+
+ /**
+ * @defgroup clarke Vector Clarke Transform
+ * Forward Clarke transform converts the instantaneous stator phases into a two-coordinate time invariant vector.
+ * Generally the Clarke transform uses three-phase currents <code>Ia, Ib and Ic</code> to calculate currents
+ * in the two-phase orthogonal stator axis <code>Ialpha</code> and <code>Ibeta</code>.
+ * When <code>Ialpha</code> is superposed with <code>Ia</code> as shown in the figure below
+ * \image html clarke.gif Stator current space vector and its components in (a,b).
+ * and <code>Ia + Ib + Ic = 0</code>, in this condition <code>Ialpha</code> and <code>Ibeta</code>
+ * can be calculated using only <code>Ia</code> and <code>Ib</code>.
+ *
+ * The function operates on a single sample of data and each call to the function returns the processed output.
+ * The library provides separate functions for Q31 and floating-point data types.
+ * \par Algorithm
+ * \image html clarkeFormula.gif
+ * where <code>Ia</code> and <code>Ib</code> are the instantaneous stator phases and
+ * <code>pIalpha</code> and <code>pIbeta</code> are the two coordinates of time invariant vector.
+ * \par Fixed-Point Behavior
+ * Care must be taken when using the Q31 version of the Clarke transform.
+ * In particular, the overflow and saturation behavior of the accumulator used must be considered.
+ * Refer to the function specific documentation below for usage guidelines.
+ */
+
+ /**
+ * @addtogroup clarke
+ * @{
+ */
+
+ /**
+ *
+ * @brief Floating-point Clarke transform
+ * @param[in] Ia input three-phase coordinate <code>a</code>
+ * @param[in] Ib input three-phase coordinate <code>b</code>
+ * @param[out] *pIalpha points to output two-phase orthogonal vector axis alpha
+ * @param[out] *pIbeta points to output two-phase orthogonal vector axis beta
+ * @return none.
+ */
+
+ static __INLINE void arm_clarke_f32(
+ float32_t Ia,
+ float32_t Ib,
+ float32_t * pIalpha,
+ float32_t * pIbeta)
+ {
+ /* Calculate pIalpha using the equation, pIalpha = Ia */
+ *pIalpha = Ia;
+
+ /* Calculate pIbeta using the equation, pIbeta = (1/sqrt(3)) * Ia + (2/sqrt(3)) * Ib */
+ *pIbeta = ((float32_t) 0.57735026919 * Ia + (float32_t) 1.15470053838 * Ib);
+
+ }
+
+ /**
+ * @brief Clarke transform for Q31 version
+ * @param[in] Ia input three-phase coordinate <code>a</code>
+ * @param[in] Ib input three-phase coordinate <code>b</code>
+ * @param[out] *pIalpha points to output two-phase orthogonal vector axis alpha
+ * @param[out] *pIbeta points to output two-phase orthogonal vector axis beta
+ * @return none.
+ *
+ * <b>Scaling and Overflow Behavior:</b>
+ * \par
+ * The function is implemented using an internal 32-bit accumulator.
+ * The accumulator maintains 1.31 format by truncating lower 31 bits of the intermediate multiplication in 2.62 format.
+ * There is saturation on the addition, hence there is no risk of overflow.
+ */
+
+ static __INLINE void arm_clarke_q31(
+ q31_t Ia,
+ q31_t Ib,
+ q31_t * pIalpha,
+ q31_t * pIbeta)
+ {
+ q31_t product1, product2; /* Temporary variables used to store intermediate results */
+
+ /* Calculating pIalpha from Ia by equation pIalpha = Ia */
+ *pIalpha = Ia;
+
+ /* Intermediate product is calculated by (1/(sqrt(3)) * Ia) */
+ product1 = (q31_t) (((q63_t) Ia * 0x24F34E8B) >> 30);
+
+ /* Intermediate product is calculated by (2/sqrt(3) * Ib) */
+ product2 = (q31_t) (((q63_t) Ib * 0x49E69D16) >> 30);
+
+ /* pIbeta is calculated by adding the intermediate products */
+ *pIbeta = __QADD(product1, product2);
+ }
+
+ /**
+ * @} end of clarke group
+ */
+
+ /**
+ * @brief Converts the elements of the Q7 vector to Q31 vector.
+ * @param[in] *pSrc input pointer
+ * @param[out] *pDst output pointer
+ * @param[in] blockSize number of samples to process
+ * @return none.
+ */
+ void arm_q7_to_q31(
+ q7_t * pSrc,
+ q31_t * pDst,
+ uint32_t blockSize);
+
+
+
+
+ /**
+ * @ingroup groupController
+ */
+
+ /**
+ * @defgroup inv_clarke Vector Inverse Clarke Transform
+ * Inverse Clarke transform converts the two-coordinate time invariant vector into instantaneous stator phases.
+ *
+ * The function operates on a single sample of data and each call to the function returns the processed output.
+ * The library provides separate functions for Q31 and floating-point data types.
+ * \par Algorithm
+ * \image html clarkeInvFormula.gif
+ * where <code>pIa</code> and <code>pIb</code> are the instantaneous stator phases and
+ * <code>Ialpha</code> and <code>Ibeta</code> are the two coordinates of time invariant vector.
+ * \par Fixed-Point Behavior
+ * Care must be taken when using the Q31 version of the Clarke transform.
+ * In particular, the overflow and saturation behavior of the accumulator used must be considered.
+ * Refer to the function specific documentation below for usage guidelines.
+ */
+
+ /**
+ * @addtogroup inv_clarke
+ * @{
+ */
+
+ /**
+ * @brief Floating-point Inverse Clarke transform
+ * @param[in] Ialpha input two-phase orthogonal vector axis alpha
+ * @param[in] Ibeta input two-phase orthogonal vector axis beta
+ * @param[out] *pIa points to output three-phase coordinate <code>a</code>
+ * @param[out] *pIb points to output three-phase coordinate <code>b</code>
+ * @return none.
+ */
+
+
+ static __INLINE void arm_inv_clarke_f32(
+ float32_t Ialpha,
+ float32_t Ibeta,
+ float32_t * pIa,
+ float32_t * pIb)
+ {
+ /* Calculating pIa from Ialpha by equation pIa = Ialpha */
+ *pIa = Ialpha;
+
+ /* Calculating pIb from Ialpha and Ibeta by equation pIb = -(1/2) * Ialpha + (sqrt(3)/2) * Ibeta */
+ *pIb = -0.5 * Ialpha + (float32_t) 0.8660254039 *Ibeta;
+
+ }
+
+ /**
+ * @brief Inverse Clarke transform for Q31 version
+ * @param[in] Ialpha input two-phase orthogonal vector axis alpha
+ * @param[in] Ibeta input two-phase orthogonal vector axis beta
+ * @param[out] *pIa points to output three-phase coordinate <code>a</code>
+ * @param[out] *pIb points to output three-phase coordinate <code>b</code>
+ * @return none.
+ *
+ * <b>Scaling and Overflow Behavior:</b>
+ * \par
+ * The function is implemented using an internal 32-bit accumulator.
+ * The accumulator maintains 1.31 format by truncating lower 31 bits of the intermediate multiplication in 2.62 format.
+ * There is saturation on the subtraction, hence there is no risk of overflow.
+ */
+
+ static __INLINE void arm_inv_clarke_q31(
+ q31_t Ialpha,
+ q31_t Ibeta,
+ q31_t * pIa,
+ q31_t * pIb)
+ {
+ q31_t product1, product2; /* Temporary variables used to store intermediate results */
+
+ /* Calculating pIa from Ialpha by equation pIa = Ialpha */
+ *pIa = Ialpha;
+
+ /* Intermediate product is calculated by (1/(2*sqrt(3)) * Ia) */
+ product1 = (q31_t) (((q63_t) (Ialpha) * (0x40000000)) >> 31);
+
+ /* Intermediate product is calculated by (1/sqrt(3) * pIb) */
+ product2 = (q31_t) (((q63_t) (Ibeta) * (0x6ED9EBA1)) >> 31);
+
+ /* pIb is calculated by subtracting the products */
+ *pIb = __QSUB(product2, product1);
+
+ }
+
+ /**
+ * @} end of inv_clarke group
+ */
+
+ /**
+ * @brief Converts the elements of the Q7 vector to Q15 vector.
+ * @param[in] *pSrc input pointer
+ * @param[out] *pDst output pointer
+ * @param[in] blockSize number of samples to process
+ * @return none.
+ */
+ void arm_q7_to_q15(
+ q7_t * pSrc,
+ q15_t * pDst,
+ uint32_t blockSize);
+
+
+
+ /**
+ * @ingroup groupController
+ */
+
+ /**
+ * @defgroup park Vector Park Transform
+ *
+ * Forward Park transform converts the input two-coordinate vector to flux and torque components.
+ * The Park transform can be used to realize the transformation of the <code>Ialpha</code> and the <code>Ibeta</code> currents
+ * from the stationary to the moving reference frame and control the spatial relationship between
+ * the stator vector current and rotor flux vector.
+ * If we consider the d axis aligned with the rotor flux, the diagram below shows the
+ * current vector and the relationship from the two reference frames:
+ * \image html park.gif "Stator current space vector and its component in (a,b) and in the d,q rotating reference frame"
+ *
+ * The function operates on a single sample of data and each call to the function returns the processed output.
+ * The library provides separate functions for Q31 and floating-point data types.
+ * \par Algorithm
+ * \image html parkFormula.gif
+ * where <code>Ialpha</code> and <code>Ibeta</code> are the stator vector components,
+ * <code>pId</code> and <code>pIq</code> are rotor vector components and <code>cosVal</code> and <code>sinVal</code> are the
+ * cosine and sine values of theta (rotor flux position).
+ * \par Fixed-Point Behavior
+ * Care must be taken when using the Q31 version of the Park transform.
+ * In particular, the overflow and saturation behavior of the accumulator used must be considered.
+ * Refer to the function specific documentation below for usage guidelines.
+ */
+
+ /**
+ * @addtogroup park
+ * @{
+ */
+
+ /**
+ * @brief Floating-point Park transform
+ * @param[in] Ialpha input two-phase vector coordinate alpha
+ * @param[in] Ibeta input two-phase vector coordinate beta
+ * @param[out] *pId points to output rotor reference frame d
+ * @param[out] *pIq points to output rotor reference frame q
+ * @param[in] sinVal sine value of rotation angle theta
+ * @param[in] cosVal cosine value of rotation angle theta
+ * @return none.
+ *
+ * The function implements the forward Park transform.
+ *
+ */
+
+ static __INLINE void arm_park_f32(
+ float32_t Ialpha,
+ float32_t Ibeta,
+ float32_t * pId,
+ float32_t * pIq,
+ float32_t sinVal,
+ float32_t cosVal)
+ {
+ /* Calculate pId using the equation, pId = Ialpha * cosVal + Ibeta * sinVal */
+ *pId = Ialpha * cosVal + Ibeta * sinVal;
+
+ /* Calculate pIq using the equation, pIq = - Ialpha * sinVal + Ibeta * cosVal */
+ *pIq = -Ialpha * sinVal + Ibeta * cosVal;
+
+ }
+
+ /**
+ * @brief Park transform for Q31 version
+ * @param[in] Ialpha input two-phase vector coordinate alpha
+ * @param[in] Ibeta input two-phase vector coordinate beta
+ * @param[out] *pId points to output rotor reference frame d
+ * @param[out] *pIq points to output rotor reference frame q
+ * @param[in] sinVal sine value of rotation angle theta
+ * @param[in] cosVal cosine value of rotation angle theta
+ * @return none.
+ *
+ * <b>Scaling and Overflow Behavior:</b>
+ * \par
+ * The function is implemented using an internal 32-bit accumulator.
+ * The accumulator maintains 1.31 format by truncating lower 31 bits of the intermediate multiplication in 2.62 format.
+ * There is saturation on the addition and subtraction, hence there is no risk of overflow.
+ */
+
+
+ static __INLINE void arm_park_q31(
+ q31_t Ialpha,
+ q31_t Ibeta,
+ q31_t * pId,
+ q31_t * pIq,
+ q31_t sinVal,
+ q31_t cosVal)
+ {
+ q31_t product1, product2; /* Temporary variables used to store intermediate results */
+ q31_t product3, product4; /* Temporary variables used to store intermediate results */
+
+ /* Intermediate product is calculated by (Ialpha * cosVal) */
+ product1 = (q31_t) (((q63_t) (Ialpha) * (cosVal)) >> 31);
+
+ /* Intermediate product is calculated by (Ibeta * sinVal) */
+ product2 = (q31_t) (((q63_t) (Ibeta) * (sinVal)) >> 31);
+
+
+ /* Intermediate product is calculated by (Ialpha * sinVal) */
+ product3 = (q31_t) (((q63_t) (Ialpha) * (sinVal)) >> 31);
+
+ /* Intermediate product is calculated by (Ibeta * cosVal) */
+ product4 = (q31_t) (((q63_t) (Ibeta) * (cosVal)) >> 31);
+
+ /* Calculate pId by adding the two intermediate products 1 and 2 */
+ *pId = __QADD(product1, product2);
+
+ /* Calculate pIq by subtracting the two intermediate products 3 from 4 */
+ *pIq = __QSUB(product4, product3);
+ }
+
+ /**
+ * @} end of park group
+ */
+
+ /**
+ * @brief Converts the elements of the Q7 vector to floating-point vector.
+ * @param[in] *pSrc is input pointer
+ * @param[out] *pDst is output pointer
+ * @param[in] blockSize is the number of samples to process
+ * @return none.
+ */
+ void arm_q7_to_float(
+ q7_t * pSrc,
+ float32_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @ingroup groupController
+ */
+
+ /**
+ * @defgroup inv_park Vector Inverse Park transform
+ * Inverse Park transform converts the input flux and torque components to two-coordinate vector.
+ *
+ * The function operates on a single sample of data and each call to the function returns the processed output.
+ * The library provides separate functions for Q31 and floating-point data types.
+ * \par Algorithm
+ * \image html parkInvFormula.gif
+ * where <code>pIalpha</code> and <code>pIbeta</code> are the stator vector components,
+ * <code>Id</code> and <code>Iq</code> are rotor vector components and <code>cosVal</code> and <code>sinVal</code> are the
+ * cosine and sine values of theta (rotor flux position).
+ * \par Fixed-Point Behavior
+ * Care must be taken when using the Q31 version of the Park transform.
+ * In particular, the overflow and saturation behavior of the accumulator used must be considered.
+ * Refer to the function specific documentation below for usage guidelines.
+ */
+
+ /**
+ * @addtogroup inv_park
+ * @{
+ */
+
+ /**
+ * @brief Floating-point Inverse Park transform
+ * @param[in] Id input coordinate of rotor reference frame d
+ * @param[in] Iq input coordinate of rotor reference frame q
+ * @param[out] *pIalpha points to output two-phase orthogonal vector axis alpha
+ * @param[out] *pIbeta points to output two-phase orthogonal vector axis beta
+ * @param[in] sinVal sine value of rotation angle theta
+ * @param[in] cosVal cosine value of rotation angle theta
+ * @return none.
+ */
+
+ static __INLINE void arm_inv_park_f32(
+ float32_t Id,
+ float32_t Iq,
+ float32_t * pIalpha,
+ float32_t * pIbeta,
+ float32_t sinVal,
+ float32_t cosVal)
+ {
+ /* Calculate pIalpha using the equation, pIalpha = Id * cosVal - Iq * sinVal */
+ *pIalpha = Id * cosVal - Iq * sinVal;
+
+ /* Calculate pIbeta using the equation, pIbeta = Id * sinVal + Iq * cosVal */
+ *pIbeta = Id * sinVal + Iq * cosVal;
+
+ }
+
+
+ /**
+ * @brief Inverse Park transform for Q31 version
+ * @param[in] Id input coordinate of rotor reference frame d
+ * @param[in] Iq input coordinate of rotor reference frame q
+ * @param[out] *pIalpha points to output two-phase orthogonal vector axis alpha
+ * @param[out] *pIbeta points to output two-phase orthogonal vector axis beta
+ * @param[in] sinVal sine value of rotation angle theta
+ * @param[in] cosVal cosine value of rotation angle theta
+ * @return none.
+ *
+ * <b>Scaling and Overflow Behavior:</b>
+ * \par
+ * The function is implemented using an internal 32-bit accumulator.
+ * The accumulator maintains 1.31 format by truncating lower 31 bits of the intermediate multiplication in 2.62 format.
+ * There is saturation on the addition, hence there is no risk of overflow.
+ */
+
+
+ static __INLINE void arm_inv_park_q31(
+ q31_t Id,
+ q31_t Iq,
+ q31_t * pIalpha,
+ q31_t * pIbeta,
+ q31_t sinVal,
+ q31_t cosVal)
+ {
+ q31_t product1, product2; /* Temporary variables used to store intermediate results */
+ q31_t product3, product4; /* Temporary variables used to store intermediate results */
+
+ /* Intermediate product is calculated by (Id * cosVal) */
+ product1 = (q31_t) (((q63_t) (Id) * (cosVal)) >> 31);
+
+ /* Intermediate product is calculated by (Iq * sinVal) */
+ product2 = (q31_t) (((q63_t) (Iq) * (sinVal)) >> 31);
+
+
+ /* Intermediate product is calculated by (Id * sinVal) */
+ product3 = (q31_t) (((q63_t) (Id) * (sinVal)) >> 31);
+
+ /* Intermediate product is calculated by (Iq * cosVal) */
+ product4 = (q31_t) (((q63_t) (Iq) * (cosVal)) >> 31);
+
+ /* Calculate pIalpha by using the two intermediate products 1 and 2 */
+ *pIalpha = __QSUB(product1, product2);
+
+ /* Calculate pIbeta by using the two intermediate products 3 and 4 */
+ *pIbeta = __QADD(product4, product3);
+
+ }
+
+ /**
+ * @} end of Inverse park group
+ */
+
+
+ /**
+ * @brief Converts the elements of the Q31 vector to floating-point vector.
+ * @param[in] *pSrc is input pointer
+ * @param[out] *pDst is output pointer
+ * @param[in] blockSize is the number of samples to process
+ * @return none.
+ */
+ void arm_q31_to_float(
+ q31_t * pSrc,
+ float32_t * pDst,
+ uint32_t blockSize);
+
+ /**
+ * @ingroup groupInterpolation
+ */
+
+ /**
+ * @defgroup LinearInterpolate Linear Interpolation
+ *
+ * Linear interpolation is a method of curve fitting using linear polynomials.
+ * Linear interpolation works by effectively drawing a straight line between two neighboring samples and returning the appropriate point along that line
+ *
+ * \par
+ * \image html LinearInterp.gif "Linear interpolation"
+ *
+ * \par
+ * A Linear Interpolate function calculates an output value(y), for the input(x)
+ * using linear interpolation of the input values x0, x1( nearest input values) and the output values y0 and y1(nearest output values)
+ *
+ * \par Algorithm:
+ * <pre>
+ * y = y0 + (x - x0) * ((y1 - y0)/(x1-x0))
+ * where x0, x1 are nearest values of input x
+ * y0, y1 are nearest values to output y
+ * </pre>
+ *
+ * \par
+ * This set of functions implements Linear interpolation process
+ * for Q7, Q15, Q31, and floating-point data types. The functions operate on a single
+ * sample of data and each call to the function returns a single processed value.
+ * <code>S</code> points to an instance of the Linear Interpolate function data structure.
+ * <code>x</code> is the input sample value. The functions returns the output value.
+ *
+ * \par
+ * if x is outside of the table boundary, Linear interpolation returns first value of the table
+ * if x is below input range and returns last value of table if x is above range.
+ */
+
+ /**
+ * @addtogroup LinearInterpolate
+ * @{
+ */
+
+ /**
+ * @brief Process function for the floating-point Linear Interpolation Function.
+ * @param[in,out] *S is an instance of the floating-point Linear Interpolation structure
+ * @param[in] x input sample to process
+ * @return y processed output sample.
+ *
+ */
+
+ static __INLINE float32_t arm_linear_interp_f32(
+ arm_linear_interp_instance_f32 * S,
+ float32_t x)
+ {
+
+ float32_t y;
+ float32_t x0, x1; /* Nearest input values */
+ float32_t y0, y1; /* Nearest output values */
+ float32_t xSpacing = S->xSpacing; /* spacing between input values */
+ int32_t i; /* Index variable */
+ float32_t *pYData = S->pYData; /* pointer to output table */
+
+ /* Calculation of index */
+ i = (x - S->x1) / xSpacing;
+
+ if(i < 0)
+ {
+ /* Iniatilize output for below specified range as least output value of table */
+ y = pYData[0];
+ }
+ else if(i >= S->nValues)
+ {
+ /* Iniatilize output for above specified range as last output value of table */
+ y = pYData[S->nValues-1];
+ }
+ else
+ {
+ /* Calculation of nearest input values */
+ x0 = S->x1 + i * xSpacing;
+ x1 = S->x1 + (i +1) * xSpacing;
+
+ /* Read of nearest output values */
+ y0 = pYData[i];
+ y1 = pYData[i + 1];
+
+ /* Calculation of output */
+ y = y0 + (x - x0) * ((y1 - y0)/(x1-x0));
+
+ }
+
+ /* returns output value */
+ return (y);
+ }
+
+ /**
+ *
+ * @brief Process function for the Q31 Linear Interpolation Function.
+ * @param[in] *pYData pointer to Q31 Linear Interpolation table
+ * @param[in] x input sample to process
+ * @param[in] nValues number of table values
+ * @return y processed output sample.
+ *
+ * \par
+ * Input sample <code>x</code> is in 12.20 format which contains 12 bits for table index and 20 bits for fractional part.
+ * This function can support maximum of table size 2^12.
+ *
+ */
+
+
+ static __INLINE q31_t arm_linear_interp_q31(q31_t *pYData,
+ q31_t x, uint32_t nValues)
+ {
+ q31_t y; /* output */
+ q31_t y0, y1; /* Nearest output values */
+ q31_t fract; /* fractional part */
+ int32_t index; /* Index to read nearest output values */
+
+ /* Input is in 12.20 format */
+ /* 12 bits for the table index */
+ /* Index value calculation */
+ index = ((x & 0xFFF00000) >> 20);
+
+ if(index >= (nValues - 1))
+ {
+ return(pYData[nValues - 1]);
+ }
+ else if(index < 0)
+ {
+ return(pYData[0]);
+ }
+ else
+ {
+
+ /* 20 bits for the fractional part */
+ /* shift left by 11 to keep fract in 1.31 format */
+ fract = (x & 0x000FFFFF) << 11;
+
+ /* Read two nearest output values from the index in 1.31(q31) format */
+ y0 = pYData[index];
+ y1 = pYData[index + 1u];
+
+ /* Calculation of y0 * (1-fract) and y is in 2.30 format */
+ y = ((q31_t) ((q63_t) y0 * (0x7FFFFFFF - fract) >> 32));
+
+ /* Calculation of y0 * (1-fract) + y1 *fract and y is in 2.30 format */
+ y += ((q31_t) (((q63_t) y1 * fract) >> 32));
+
+ /* Convert y to 1.31 format */
+ return (y << 1u);
+
+ }
+
+ }
+
+ /**
+ *
+ * @brief Process function for the Q15 Linear Interpolation Function.
+ * @param[in] *pYData pointer to Q15 Linear Interpolation table
+ * @param[in] x input sample to process
+ * @param[in] nValues number of table values
+ * @return y processed output sample.
+ *
+ * \par
+ * Input sample <code>x</code> is in 12.20 format which contains 12 bits for table index and 20 bits for fractional part.
+ * This function can support maximum of table size 2^12.
+ *
+ */
+
+
+ static __INLINE q15_t arm_linear_interp_q15(q15_t *pYData, q31_t x, uint32_t nValues)
+ {
+ q63_t y; /* output */
+ q15_t y0, y1; /* Nearest output values */
+ q31_t fract; /* fractional part */
+ int32_t index; /* Index to read nearest output values */
+
+ /* Input is in 12.20 format */
+ /* 12 bits for the table index */
+ /* Index value calculation */
+ index = ((x & 0xFFF00000) >> 20u);
+
+ if(index >= (nValues - 1))
+ {
+ return(pYData[nValues - 1]);
+ }
+ else if(index < 0)
+ {
+ return(pYData[0]);
+ }
+ else
+ {
+ /* 20 bits for the fractional part */
+ /* fract is in 12.20 format */
+ fract = (x & 0x000FFFFF);
+
+ /* Read two nearest output values from the index */
+ y0 = pYData[index];
+ y1 = pYData[index + 1u];
+
+ /* Calculation of y0 * (1-fract) and y is in 13.35 format */
+ y = ((q63_t) y0 * (0xFFFFF - fract));
+
+ /* Calculation of (y0 * (1-fract) + y1 * fract) and y is in 13.35 format */
+ y += ((q63_t) y1 * (fract));
+
+ /* convert y to 1.15 format */
+ return (y >> 20);
+ }
+
+
+ }
+
+ /**
+ *
+ * @brief Process function for the Q7 Linear Interpolation Function.
+ * @param[in] *pYData pointer to Q7 Linear Interpolation table
+ * @param[in] x input sample to process
+ * @param[in] nValues number of table values
+ * @return y processed output sample.
+ *
+ * \par
+ * Input sample <code>x</code> is in 12.20 format which contains 12 bits for table index and 20 bits for fractional part.
+ * This function can support maximum of table size 2^12.
+ */
+
+
+ static __INLINE q7_t arm_linear_interp_q7(q7_t *pYData, q31_t x, uint32_t nValues)
+ {
+ q31_t y; /* output */
+ q7_t y0, y1; /* Nearest output values */
+ q31_t fract; /* fractional part */
+ int32_t index; /* Index to read nearest output values */
+
+ /* Input is in 12.20 format */
+ /* 12 bits for the table index */
+ /* Index value calculation */
+ index = ((x & 0xFFF00000) >> 20u);
+
+
+ if(index >= (nValues - 1))
+ {
+ return(pYData[nValues - 1]);
+ }
+ else if(index < 0)
+ {
+ return(pYData[0]);
+ }
+ else
+ {
+
+ /* 20 bits for the fractional part */
+ /* fract is in 12.20 format */
+ fract = (x & 0x000FFFFF);
+
+ /* Read two nearest output values from the index and are in 1.7(q7) format */
+ y0 = pYData[index];
+ y1 = pYData[index + 1u];
+
+ /* Calculation of y0 * (1-fract ) and y is in 13.27(q27) format */
+ y = ((y0 * (0xFFFFF - fract)));
+
+ /* Calculation of y1 * fract + y0 * (1-fract) and y is in 13.27(q27) format */
+ y += (y1 * fract);
+
+ /* convert y to 1.7(q7) format */
+ return (y >> 20u);
+
+ }
+
+ }
+ /**
+ * @} end of LinearInterpolate group
+ */
+
+ /**
+ * @brief Fast approximation to the trigonometric sine function for floating-point data.
+ * @param[in] x input value in radians.
+ * @return sin(x).
+ */
+
+ float32_t arm_sin_f32(
+ float32_t x);
+
+ /**
+ * @brief Fast approximation to the trigonometric sine function for Q31 data.
+ * @param[in] x Scaled input value in radians.
+ * @return sin(x).
+ */
+
+ q31_t arm_sin_q31(
+ q31_t x);
+
+ /**
+ * @brief Fast approximation to the trigonometric sine function for Q15 data.
+ * @param[in] x Scaled input value in radians.
+ * @return sin(x).
+ */
+
+ q15_t arm_sin_q15(
+ q15_t x);
+
+ /**
+ * @brief Fast approximation to the trigonometric cosine function for floating-point data.
+ * @param[in] x input value in radians.
+ * @return cos(x).
+ */
+
+ float32_t arm_cos_f32(
+ float32_t x);
+
+ /**
+ * @brief Fast approximation to the trigonometric cosine function for Q31 data.
+ * @param[in] x Scaled input value in radians.
+ * @return cos(x).
+ */
+
+ q31_t arm_cos_q31(
+ q31_t x);
+
+ /**
+ * @brief Fast approximation to the trigonometric cosine function for Q15 data.
+ * @param[in] x Scaled input value in radians.
+ * @return cos(x).
+ */
+
+ q15_t arm_cos_q15(
+ q15_t x);
+
+
+ /**
+ * @ingroup groupFastMath
+ */
+
+
+ /**
+ * @defgroup SQRT Square Root
+ *
+ * Computes the square root of a number.
+ * There are separate functions for Q15, Q31, and floating-point data types.
+ * The square root function is computed using the Newton-Raphson algorithm.
+ * This is an iterative algorithm of the form:
+ * <pre>
+ * x1 = x0 - f(x0)/f'(x0)
+ * </pre>
+ * where <code>x1</code> is the current estimate,
+ * <code>x0</code> is the previous estimate and
+ * <code>f'(x0)</code> is the derivative of <code>f()</code> evaluated at <code>x0</code>.
+ * For the square root function, the algorithm reduces to:
+ * <pre>
+ * x0 = in/2 [initial guess]
+ * x1 = 1/2 * ( x0 + in / x0) [each iteration]
+ * </pre>
+ */
+
+
+ /**
+ * @addtogroup SQRT
+ * @{
+ */
+
+ /**
+ * @brief Floating-point square root function.
+ * @param[in] in input value.
+ * @param[out] *pOut square root of input value.
+ * @return The function returns ARM_MATH_SUCCESS if input value is positive value or ARM_MATH_ARGUMENT_ERROR if
+ * <code>in</code> is negative value and returns zero output for negative values.
+ */
+
+ static __INLINE arm_status arm_sqrt_f32(
+ float32_t in, float32_t *pOut)
+ {
+ if(in > 0)
+ {
+
+// #if __FPU_USED
+ #if (__FPU_USED == 1) && defined ( __CC_ARM )
+ *pOut = __sqrtf(in);
+ #else
+ *pOut = sqrtf(in);
+ #endif
+
+ return (ARM_MATH_SUCCESS);
+ }
+ else
+ {
+ *pOut = 0.0f;
+ return (ARM_MATH_ARGUMENT_ERROR);
+ }
+
+ }
+
+
+ /**
+ * @brief Q31 square root function.
+ * @param[in] in input value. The range of the input value is [0 +1) or 0x00000000 to 0x7FFFFFFF.
+ * @param[out] *pOut square root of input value.
+ * @return The function returns ARM_MATH_SUCCESS if input value is positive value or ARM_MATH_ARGUMENT_ERROR if
+ * <code>in</code> is negative value and returns zero output for negative values.
+ */
+ arm_status arm_sqrt_q31(
+ q31_t in, q31_t *pOut);
+
+ /**
+ * @brief Q15 square root function.
+ * @param[in] in input value. The range of the input value is [0 +1) or 0x0000 to 0x7FFF.
+ * @param[out] *pOut square root of input value.
+ * @return The function returns ARM_MATH_SUCCESS if input value is positive value or ARM_MATH_ARGUMENT_ERROR if
+ * <code>in</code> is negative value and returns zero output for negative values.
+ */
+ arm_status arm_sqrt_q15(
+ q15_t in, q15_t *pOut);
+
+ /**
+ * @} end of SQRT group
+ */
+
+
+
+
+
+
+ /**
+ * @brief floating-point Circular write function.
+ */
+
+ static __INLINE void arm_circularWrite_f32(
+ int32_t * circBuffer,
+ int32_t L,
+ uint16_t * writeOffset,
+ int32_t bufferInc,
+ const int32_t * src,
+ int32_t srcInc,
+ uint32_t blockSize)
+ {
+ uint32_t i = 0u;
+ int32_t wOffset;
+
+ /* Copy the value of Index pointer that points
+ * to the current location where the input samples to be copied */
+ wOffset = *writeOffset;
+
+ /* Loop over the blockSize */
+ i = blockSize;
+
+ while(i > 0u)
+ {
+ /* copy the input sample to the circular buffer */
+ circBuffer[wOffset] = *src;
+
+ /* Update the input pointer */
+ src += srcInc;
+
+ /* Circularly update wOffset. Watch out for positive and negative value */
+ wOffset += bufferInc;
+ if(wOffset >= L)
+ wOffset -= L;
+
+ /* Decrement the loop counter */
+ i--;
+ }
+
+ /* Update the index pointer */
+ *writeOffset = wOffset;
+ }
+
+
+
+ /**
+ * @brief floating-point Circular Read function.
+ */
+ static __INLINE void arm_circularRead_f32(
+ int32_t * circBuffer,
+ int32_t L,
+ int32_t * readOffset,
+ int32_t bufferInc,
+ int32_t * dst,
+ int32_t * dst_base,
+ int32_t dst_length,
+ int32_t dstInc,
+ uint32_t blockSize)
+ {
+ uint32_t i = 0u;
+ int32_t rOffset, dst_end;
+
+ /* Copy the value of Index pointer that points
+ * to the current location from where the input samples to be read */
+ rOffset = *readOffset;
+ dst_end = (int32_t) (dst_base + dst_length);
+
+ /* Loop over the blockSize */
+ i = blockSize;
+
+ while(i > 0u)
+ {
+ /* copy the sample from the circular buffer to the destination buffer */
+ *dst = circBuffer[rOffset];
+
+ /* Update the input pointer */
+ dst += dstInc;
+
+ if(dst == (int32_t *) dst_end)
+ {
+ dst = dst_base;
+ }
+
+ /* Circularly update rOffset. Watch out for positive and negative value */
+ rOffset += bufferInc;
+
+ if(rOffset >= L)
+ {
+ rOffset -= L;
+ }
+
+ /* Decrement the loop counter */
+ i--;
+ }
+
+ /* Update the index pointer */
+ *readOffset = rOffset;
+ }
+
+ /**
+ * @brief Q15 Circular write function.
+ */
+
+ static __INLINE void arm_circularWrite_q15(
+ q15_t * circBuffer,
+ int32_t L,
+ uint16_t * writeOffset,
+ int32_t bufferInc,
+ const q15_t * src,
+ int32_t srcInc,
+ uint32_t blockSize)
+ {
+ uint32_t i = 0u;
+ int32_t wOffset;
+
+ /* Copy the value of Index pointer that points
+ * to the current location where the input samples to be copied */
+ wOffset = *writeOffset;
+
+ /* Loop over the blockSize */
+ i = blockSize;
+
+ while(i > 0u)
+ {
+ /* copy the input sample to the circular buffer */
+ circBuffer[wOffset] = *src;
+
+ /* Update the input pointer */
+ src += srcInc;
+
+ /* Circularly update wOffset. Watch out for positive and negative value */
+ wOffset += bufferInc;
+ if(wOffset >= L)
+ wOffset -= L;
+
+ /* Decrement the loop counter */
+ i--;
+ }
+
+ /* Update the index pointer */
+ *writeOffset = wOffset;
+ }
+
+
+
+ /**
+ * @brief Q15 Circular Read function.
+ */
+ static __INLINE void arm_circularRead_q15(
+ q15_t * circBuffer,
+ int32_t L,
+ int32_t * readOffset,
+ int32_t bufferInc,
+ q15_t * dst,
+ q15_t * dst_base,
+ int32_t dst_length,
+ int32_t dstInc,
+ uint32_t blockSize)
+ {
+ uint32_t i = 0;
+ int32_t rOffset, dst_end;
+
+ /* Copy the value of Index pointer that points
+ * to the current location from where the input samples to be read */
+ rOffset = *readOffset;
+
+ dst_end = (int32_t) (dst_base + dst_length);
+
+ /* Loop over the blockSize */
+ i = blockSize;
+
+ while(i > 0u)
+ {
+ /* copy the sample from the circular buffer to the destination buffer */
+ *dst = circBuffer[rOffset];
+
+ /* Update the input pointer */
+ dst += dstInc;
+
+ if(dst == (q15_t *) dst_end)
+ {
+ dst = dst_base;
+ }
+
+ /* Circularly update wOffset. Watch out for positive and negative value */
+ rOffset += bufferInc;
+
+ if(rOffset >= L)
+ {
+ rOffset -= L;
+ }
+
+ /* Decrement the loop counter */
+ i--;
+ }
+
+ /* Update the index pointer */
+ *readOffset = rOffset;
+ }
+
+
+ /**
+ * @brief Q7 Circular write function.
+ */
+
+ static __INLINE void arm_circularWrite_q7(
+ q7_t * circBuffer,
+ int32_t L,
+ uint16_t * writeOffset,
+ int32_t bufferInc,
+ const q7_t * src,
+ int32_t srcInc,
+ uint32_t blockSize)
+ {
+ uint32_t i = 0u;
+ int32_t wOffset;
+
+ /* Copy the value of Index pointer that points
+ * to the current location where the input samples to be copied */
+ wOffset = *writeOffset;
+
+ /* Loop over the blockSize */
+ i = blockSize;
+
+ while(i > 0u)
+ {
+ /* copy the input sample to the circular buffer */
+ circBuffer[wOffset] = *src;
+
+ /* Update the input pointer */
+ src += srcInc;
+
+ /* Circularly update wOffset. Watch out for positive and negative value */
+ wOffset += bufferInc;
+ if(wOffset >= L)
+ wOffset -= L;
+
+ /* Decrement the loop counter */
+ i--;
+ }
+
+ /* Update the index pointer */
+ *writeOffset = wOffset;
+ }
+
+
+
+ /**
+ * @brief Q7 Circular Read function.
+ */
+ static __INLINE void arm_circularRead_q7(
+ q7_t * circBuffer,
+ int32_t L,
+ int32_t * readOffset,
+ int32_t bufferInc,
+ q7_t * dst,
+ q7_t * dst_base,
+ int32_t dst_length,
+ int32_t dstInc,
+ uint32_t blockSize)
+ {
+ uint32_t i = 0;
+ int32_t rOffset, dst_end;
+
+ /* Copy the value of Index pointer that points
+ * to the current location from where the input samples to be read */
+ rOffset = *readOffset;
+
+ dst_end = (int32_t) (dst_base + dst_length);
+
+ /* Loop over the blockSize */
+ i = blockSize;
+
+ while(i > 0u)
+ {
+ /* copy the sample from the circular buffer to the destination buffer */
+ *dst = circBuffer[rOffset];
+
+ /* Update the input pointer */
+ dst += dstInc;
+
+ if(dst == (q7_t *) dst_end)
+ {
+ dst = dst_base;
+ }
+
+ /* Circularly update rOffset. Watch out for positive and negative value */
+ rOffset += bufferInc;
+
+ if(rOffset >= L)
+ {
+ rOffset -= L;
+ }
+
+ /* Decrement the loop counter */
+ i--;
+ }
+
+ /* Update the index pointer */
+ *readOffset = rOffset;
+ }
+
+
+ /**
+ * @brief Sum of the squares of the elements of a Q31 vector.
+ * @param[in] *pSrc is input pointer
+ * @param[in] blockSize is the number of samples to process
+ * @param[out] *pResult is output value.
+ * @return none.
+ */
+
+ void arm_power_q31(
+ q31_t * pSrc,
+ uint32_t blockSize,
+ q63_t * pResult);
+
+ /**
+ * @brief Sum of the squares of the elements of a floating-point vector.
+ * @param[in] *pSrc is input pointer
+ * @param[in] blockSize is the number of samples to process
+ * @param[out] *pResult is output value.
+ * @return none.
+ */
+
+ void arm_power_f32(
+ float32_t * pSrc,
+ uint32_t blockSize,
+ float32_t * pResult);
+
+ /**
+ * @brief Sum of the squares of the elements of a Q15 vector.
+ * @param[in] *pSrc is input pointer
+ * @param[in] blockSize is the number of samples to process
+ * @param[out] *pResult is output value.
+ * @return none.
+ */
+
+ void arm_power_q15(
+ q15_t * pSrc,
+ uint32_t blockSize,
+ q63_t * pResult);
+
+ /**
+ * @brief Sum of the squares of the elements of a Q7 vector.
+ * @param[in] *pSrc is input pointer
+ * @param[in] blockSize is the number of samples to process
+ * @param[out] *pResult is output value.
+ * @return none.
+ */
+
+ void arm_power_q7(
+ q7_t * pSrc,
+ uint32_t blockSize,
+ q31_t * pResult);
+
+ /**
+ * @brief Mean value of a Q7 vector.
+ * @param[in] *pSrc is input pointer
+ * @param[in] blockSize is the number of samples to process
+ * @param[out] *pResult is output value.
+ * @return none.
+ */
+
+ void arm_mean_q7(
+ q7_t * pSrc,
+ uint32_t blockSize,
+ q7_t * pResult);
+
+ /**
+ * @brief Mean value of a Q15 vector.
+ * @param[in] *pSrc is input pointer
+ * @param[in] blockSize is the number of samples to process
+ * @param[out] *pResult is output value.
+ * @return none.
+ */
+ void arm_mean_q15(
+ q15_t * pSrc,
+ uint32_t blockSize,
+ q15_t * pResult);
+
+ /**
+ * @brief Mean value of a Q31 vector.
+ * @param[in] *pSrc is input pointer
+ * @param[in] blockSize is the number of samples to process
+ * @param[out] *pResult is output value.
+ * @return none.
+ */
+ void arm_mean_q31(
+ q31_t * pSrc,
+ uint32_t blockSize,
+ q31_t * pResult);
+
+ /**
+ * @brief Mean value of a floating-point vector.
+ * @param[in] *pSrc is input pointer
+ * @param[in] blockSize is the number of samples to process
+ * @param[out] *pResult is output value.
+ * @return none.
+ */
+ void arm_mean_f32(
+ float32_t * pSrc,
+ uint32_t blockSize,
+ float32_t * pResult);
+
+ /**
+ * @brief Variance of the elements of a floating-point vector.
+ * @param[in] *pSrc is input pointer
+ * @param[in] blockSize is the number of samples to process
+ * @param[out] *pResult is output value.
+ * @return none.
+ */
+
+ void arm_var_f32(
+ float32_t * pSrc,
+ uint32_t blockSize,
+ float32_t * pResult);
+
+ /**
+ * @brief Variance of the elements of a Q31 vector.
+ * @param[in] *pSrc is input pointer
+ * @param[in] blockSize is the number of samples to process
+ * @param[out] *pResult is output value.
+ * @return none.
+ */
+
+ void arm_var_q31(
+ q31_t * pSrc,
+ uint32_t blockSize,
+ q63_t * pResult);
+
+ /**
+ * @brief Variance of the elements of a Q15 vector.
+ * @param[in] *pSrc is input pointer
+ * @param[in] blockSize is the number of samples to process
+ * @param[out] *pResult is output value.
+ * @return none.
+ */
+
+ void arm_var_q15(
+ q15_t * pSrc,
+ uint32_t blockSize,
+ q31_t * pResult);
+
+ /**
+ * @brief Root Mean Square of the elements of a floating-point vector.
+ * @param[in] *pSrc is input pointer
+ * @param[in] blockSize is the number of samples to process
+ * @param[out] *pResult is output value.
+ * @return none.
+ */
+
+ void arm_rms_f32(
+ float32_t * pSrc,
+ uint32_t blockSize,
+ float32_t * pResult);
+
+ /**
+ * @brief Root Mean Square of the elements of a Q31 vector.
+ * @param[in] *pSrc is input pointer
+ * @param[in] blockSize is the number of samples to process
+ * @param[out] *pResult is output value.
+ * @return none.
+ */
+
+ void arm_rms_q31(
+ q31_t * pSrc,
+ uint32_t blockSize,
+ q31_t * pResult);
+
+ /**
+ * @brief Root Mean Square of the elements of a Q15 vector.
+ * @param[in] *pSrc is input pointer
+ * @param[in] blockSize is the number of samples to process
+ * @param[out] *pResult is output value.
+ * @return none.
+ */
+
+ void arm_rms_q15(
+ q15_t * pSrc,
+ uint32_t blockSize,
+ q15_t * pResult);
+
+ /**
+ * @brief Standard deviation of the elements of a floating-point vector.
+ * @param[in] *pSrc is input pointer
+ * @param[in] blockSize is the number of samples to process
+ * @param[out] *pResult is output value.
+ * @return none.
+ */
+
+ void arm_std_f32(
+ float32_t * pSrc,
+ uint32_t blockSize,
+ float32_t * pResult);
+
+ /**
+ * @brief Standard deviation of the elements of a Q31 vector.
+ * @param[in] *pSrc is input pointer
+ * @param[in] blockSize is the number of samples to process
+ * @param[out] *pResult is output value.
+ * @return none.
+ */
+
+ void arm_std_q31(
+ q31_t * pSrc,
+ uint32_t blockSize,
+ q31_t * pResult);
+
+ /**
+ * @brief Standard deviation of the elements of a Q15 vector.
+ * @param[in] *pSrc is input pointer
+ * @param[in] blockSize is the number of samples to process
+ * @param[out] *pResult is output value.
+ * @return none.
+ */
+
+ void arm_std_q15(
+ q15_t * pSrc,
+ uint32_t blockSize,
+ q15_t * pResult);
+
+ /**
+ * @brief Floating-point complex magnitude
+ * @param[in] *pSrc points to the complex input vector
+ * @param[out] *pDst points to the real output vector
+ * @param[in] numSamples number of complex samples in the input vector
+ * @return none.
+ */
+
+ void arm_cmplx_mag_f32(
+ float32_t * pSrc,
+ float32_t * pDst,
+ uint32_t numSamples);
+
+ /**
+ * @brief Q31 complex magnitude
+ * @param[in] *pSrc points to the complex input vector
+ * @param[out] *pDst points to the real output vector
+ * @param[in] numSamples number of complex samples in the input vector
+ * @return none.
+ */
+
+ void arm_cmplx_mag_q31(
+ q31_t * pSrc,
+ q31_t * pDst,
+ uint32_t numSamples);
+
+ /**
+ * @brief Q15 complex magnitude
+ * @param[in] *pSrc points to the complex input vector
+ * @param[out] *pDst points to the real output vector
+ * @param[in] numSamples number of complex samples in the input vector
+ * @return none.
+ */
+
+ void arm_cmplx_mag_q15(
+ q15_t * pSrc,
+ q15_t * pDst,
+ uint32_t numSamples);
+
+ /**
+ * @brief Q15 complex dot product
+ * @param[in] *pSrcA points to the first input vector
+ * @param[in] *pSrcB points to the second input vector
+ * @param[in] numSamples number of complex samples in each vector
+ * @param[out] *realResult real part of the result returned here
+ * @param[out] *imagResult imaginary part of the result returned here
+ * @return none.
+ */
+
+ void arm_cmplx_dot_prod_q15(
+ q15_t * pSrcA,
+ q15_t * pSrcB,
+ uint32_t numSamples,
+ q31_t * realResult,
+ q31_t * imagResult);
+
+ /**
+ * @brief Q31 complex dot product
+ * @param[in] *pSrcA points to the first input vector
+ * @param[in] *pSrcB points to the second input vector
+ * @param[in] numSamples number of complex samples in each vector
+ * @param[out] *realResult real part of the result returned here
+ * @param[out] *imagResult imaginary part of the result returned here
+ * @return none.
+ */
+
+ void arm_cmplx_dot_prod_q31(
+ q31_t * pSrcA,
+ q31_t * pSrcB,
+ uint32_t numSamples,
+ q63_t * realResult,
+ q63_t * imagResult);
+
+ /**
+ * @brief Floating-point complex dot product
+ * @param[in] *pSrcA points to the first input vector
+ * @param[in] *pSrcB points to the second input vector
+ * @param[in] numSamples number of complex samples in each vector
+ * @param[out] *realResult real part of the result returned here
+ * @param[out] *imagResult imaginary part of the result returned here
+ * @return none.
+ */
+
+ void arm_cmplx_dot_prod_f32(
+ float32_t * pSrcA,
+ float32_t * pSrcB,
+ uint32_t numSamples,
+ float32_t * realResult,
+ float32_t * imagResult);
+
+ /**
+ * @brief Q15 complex-by-real multiplication
+ * @param[in] *pSrcCmplx points to the complex input vector
+ * @param[in] *pSrcReal points to the real input vector
+ * @param[out] *pCmplxDst points to the complex output vector
+ * @param[in] numSamples number of samples in each vector
+ * @return none.
+ */
+
+ void arm_cmplx_mult_real_q15(
+ q15_t * pSrcCmplx,
+ q15_t * pSrcReal,
+ q15_t * pCmplxDst,
+ uint32_t numSamples);
+
+ /**
+ * @brief Q31 complex-by-real multiplication
+ * @param[in] *pSrcCmplx points to the complex input vector
+ * @param[in] *pSrcReal points to the real input vector
+ * @param[out] *pCmplxDst points to the complex output vector
+ * @param[in] numSamples number of samples in each vector
+ * @return none.
+ */
+
+ void arm_cmplx_mult_real_q31(
+ q31_t * pSrcCmplx,
+ q31_t * pSrcReal,
+ q31_t * pCmplxDst,
+ uint32_t numSamples);
+
+ /**
+ * @brief Floating-point complex-by-real multiplication
+ * @param[in] *pSrcCmplx points to the complex input vector
+ * @param[in] *pSrcReal points to the real input vector
+ * @param[out] *pCmplxDst points to the complex output vector
+ * @param[in] numSamples number of samples in each vector
+ * @return none.
+ */
+
+ void arm_cmplx_mult_real_f32(
+ float32_t * pSrcCmplx,
+ float32_t * pSrcReal,
+ float32_t * pCmplxDst,
+ uint32_t numSamples);
+
+ /**
+ * @brief Minimum value of a Q7 vector.
+ * @param[in] *pSrc is input pointer
+ * @param[in] blockSize is the number of samples to process
+ * @param[out] *result is output pointer
+ * @param[in] index is the array index of the minimum value in the input buffer.
+ * @return none.
+ */
+
+ void arm_min_q7(
+ q7_t * pSrc,
+ uint32_t blockSize,
+ q7_t * result,
+ uint32_t * index);
+
+ /**
+ * @brief Minimum value of a Q15 vector.
+ * @param[in] *pSrc is input pointer
+ * @param[in] blockSize is the number of samples to process
+ * @param[out] *pResult is output pointer
+ * @param[in] *pIndex is the array index of the minimum value in the input buffer.
+ * @return none.
+ */
+
+ void arm_min_q15(
+ q15_t * pSrc,
+ uint32_t blockSize,
+ q15_t * pResult,
+ uint32_t * pIndex);
+
+ /**
+ * @brief Minimum value of a Q31 vector.
+ * @param[in] *pSrc is input pointer
+ * @param[in] blockSize is the number of samples to process
+ * @param[out] *pResult is output pointer
+ * @param[out] *pIndex is the array index of the minimum value in the input buffer.
+ * @return none.
+ */
+ void arm_min_q31(
+ q31_t * pSrc,
+ uint32_t blockSize,
+ q31_t * pResult,
+ uint32_t * pIndex);
+
+ /**
+ * @brief Minimum value of a floating-point vector.
+ * @param[in] *pSrc is input pointer
+ * @param[in] blockSize is the number of samples to process
+ * @param[out] *pResult is output pointer
+ * @param[out] *pIndex is the array index of the minimum value in the input buffer.
+ * @return none.
+ */
+
+ void arm_min_f32(
+ float32_t * pSrc,
+ uint32_t blockSize,
+ float32_t * pResult,
+ uint32_t * pIndex);
+
+/**
+ * @brief Maximum value of a Q7 vector.
+ * @param[in] *pSrc points to the input buffer
+ * @param[in] blockSize length of the input vector
+ * @param[out] *pResult maximum value returned here
+ * @param[out] *pIndex index of maximum value returned here
+ * @return none.
+ */
+
+ void arm_max_q7(
+ q7_t * pSrc,
+ uint32_t blockSize,
+ q7_t * pResult,
+ uint32_t * pIndex);
+
+/**
+ * @brief Maximum value of a Q15 vector.
+ * @param[in] *pSrc points to the input buffer
+ * @param[in] blockSize length of the input vector
+ * @param[out] *pResult maximum value returned here
+ * @param[out] *pIndex index of maximum value returned here
+ * @return none.
+ */
+
+ void arm_max_q15(
+ q15_t * pSrc,
+ uint32_t blockSize,
+ q15_t * pResult,
+ uint32_t * pIndex);
+
+/**
+ * @brief Maximum value of a Q31 vector.
+ * @param[in] *pSrc points to the input buffer
+ * @param[in] blockSize length of the input vector
+ * @param[out] *pResult maximum value returned here
+ * @param[out] *pIndex index of maximum value returned here
+ * @return none.
+ */
+
+ void arm_max_q31(
+ q31_t * pSrc,
+ uint32_t blockSize,
+ q31_t * pResult,
+ uint32_t * pIndex);
+
+/**
+ * @brief Maximum value of a floating-point vector.
+ * @param[in] *pSrc points to the input buffer
+ * @param[in] blockSize length of the input vector
+ * @param[out] *pResult maximum value returned here
+ * @param[out] *pIndex index of maximum value returned here
+ * @return none.
+ */
+
+ void arm_max_f32(
+ float32_t * pSrc,
+ uint32_t blockSize,
+ float32_t * pResult,
+ uint32_t * pIndex);
+
+ /**
+ * @brief Q15 complex-by-complex multiplication
+ * @param[in] *pSrcA points to the first input vector
+ * @param[in] *pSrcB points to the second input vector
+ * @param[out] *pDst points to the output vector
+ * @param[in] numSamples number of complex samples in each vector
+ * @return none.
+ */
+
+ void arm_cmplx_mult_cmplx_q15(
+ q15_t * pSrcA,
+ q15_t * pSrcB,
+ q15_t * pDst,
+ uint32_t numSamples);
+
+ /**
+ * @brief Q31 complex-by-complex multiplication
+ * @param[in] *pSrcA points to the first input vector
+ * @param[in] *pSrcB points to the second input vector
+ * @param[out] *pDst points to the output vector
+ * @param[in] numSamples number of complex samples in each vector
+ * @return none.
+ */
+
+ void arm_cmplx_mult_cmplx_q31(
+ q31_t * pSrcA,
+ q31_t * pSrcB,
+ q31_t * pDst,
+ uint32_t numSamples);
+
+ /**
+ * @brief Floating-point complex-by-complex multiplication
+ * @param[in] *pSrcA points to the first input vector
+ * @param[in] *pSrcB points to the second input vector
+ * @param[out] *pDst points to the output vector
+ * @param[in] numSamples number of complex samples in each vector
+ * @return none.
+ */
+
+ void arm_cmplx_mult_cmplx_f32(
+ float32_t * pSrcA,
+ float32_t * pSrcB,
+ float32_t * pDst,
+ uint32_t numSamples);
+
+ /**
+ * @brief Converts the elements of the floating-point vector to Q31 vector.
+ * @param[in] *pSrc points to the floating-point input vector
+ * @param[out] *pDst points to the Q31 output vector
+ * @param[in] blockSize length of the input vector
+ * @return none.
+ */
+ void arm_float_to_q31(
+ float32_t * pSrc,
+ q31_t * pDst,
+ uint32_t blockSize);
+
+ /**
+ * @brief Converts the elements of the floating-point vector to Q15 vector.
+ * @param[in] *pSrc points to the floating-point input vector
+ * @param[out] *pDst points to the Q15 output vector
+ * @param[in] blockSize length of the input vector
+ * @return none
+ */
+ void arm_float_to_q15(
+ float32_t * pSrc,
+ q15_t * pDst,
+ uint32_t blockSize);
+
+ /**
+ * @brief Converts the elements of the floating-point vector to Q7 vector.
+ * @param[in] *pSrc points to the floating-point input vector
+ * @param[out] *pDst points to the Q7 output vector
+ * @param[in] blockSize length of the input vector
+ * @return none
+ */
+ void arm_float_to_q7(
+ float32_t * pSrc,
+ q7_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Converts the elements of the Q31 vector to Q15 vector.
+ * @param[in] *pSrc is input pointer
+ * @param[out] *pDst is output pointer
+ * @param[in] blockSize is the number of samples to process
+ * @return none.
+ */
+ void arm_q31_to_q15(
+ q31_t * pSrc,
+ q15_t * pDst,
+ uint32_t blockSize);
+
+ /**
+ * @brief Converts the elements of the Q31 vector to Q7 vector.
+ * @param[in] *pSrc is input pointer
+ * @param[out] *pDst is output pointer
+ * @param[in] blockSize is the number of samples to process
+ * @return none.
+ */
+ void arm_q31_to_q7(
+ q31_t * pSrc,
+ q7_t * pDst,
+ uint32_t blockSize);
+
+ /**
+ * @brief Converts the elements of the Q15 vector to floating-point vector.
+ * @param[in] *pSrc is input pointer
+ * @param[out] *pDst is output pointer
+ * @param[in] blockSize is the number of samples to process
+ * @return none.
+ */
+ void arm_q15_to_float(
+ q15_t * pSrc,
+ float32_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Converts the elements of the Q15 vector to Q31 vector.
+ * @param[in] *pSrc is input pointer
+ * @param[out] *pDst is output pointer
+ * @param[in] blockSize is the number of samples to process
+ * @return none.
+ */
+ void arm_q15_to_q31(
+ q15_t * pSrc,
+ q31_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @brief Converts the elements of the Q15 vector to Q7 vector.
+ * @param[in] *pSrc is input pointer
+ * @param[out] *pDst is output pointer
+ * @param[in] blockSize is the number of samples to process
+ * @return none.
+ */
+ void arm_q15_to_q7(
+ q15_t * pSrc,
+ q7_t * pDst,
+ uint32_t blockSize);
+
+
+ /**
+ * @ingroup groupInterpolation
+ */
+
+ /**
+ * @defgroup BilinearInterpolate Bilinear Interpolation
+ *
+ * Bilinear interpolation is an extension of linear interpolation applied to a two dimensional grid.
+ * The underlying function <code>f(x, y)</code> is sampled on a regular grid and the interpolation process
+ * determines values between the grid points.
+ * Bilinear interpolation is equivalent to two step linear interpolation, first in the x-dimension and then in the y-dimension.
+ * Bilinear interpolation is often used in image processing to rescale images.
+ * The CMSIS DSP library provides bilinear interpolation functions for Q7, Q15, Q31, and floating-point data types.
+ *
+ * <b>Algorithm</b>
+ * \par
+ * The instance structure used by the bilinear interpolation functions describes a two dimensional data table.
+ * For floating-point, the instance structure is defined as:
+ * <pre>
+ * typedef struct
+ * {
+ * uint16_t numRows;
+ * uint16_t numCols;
+ * float32_t *pData;
+ * } arm_bilinear_interp_instance_f32;
+ * </pre>
+ *
+ * \par
+ * where <code>numRows</code> specifies the number of rows in the table;
+ * <code>numCols</code> specifies the number of columns in the table;
+ * and <code>pData</code> points to an array of size <code>numRows*numCols</code> values.
+ * The data table <code>pTable</code> is organized in row order and the supplied data values fall on integer indexes.
+ * That is, table element (x,y) is located at <code>pTable[x + y*numCols]</code> where x and y are integers.
+ *
+ * \par
+ * Let <code>(x, y)</code> specify the desired interpolation point. Then define:
+ * <pre>
+ * XF = floor(x)
+ * YF = floor(y)
+ * </pre>
+ * \par
+ * The interpolated output point is computed as:
+ * <pre>
+ * f(x, y) = f(XF, YF) * (1-(x-XF)) * (1-(y-YF))
+ * + f(XF+1, YF) * (x-XF)*(1-(y-YF))
+ * + f(XF, YF+1) * (1-(x-XF))*(y-YF)
+ * + f(XF+1, YF+1) * (x-XF)*(y-YF)
+ * </pre>
+ * Note that the coordinates (x, y) contain integer and fractional components.
+ * The integer components specify which portion of the table to use while the
+ * fractional components control the interpolation processor.
+ *
+ * \par
+ * if (x,y) are outside of the table boundary, Bilinear interpolation returns zero output.
+ */
+
+ /**
+ * @addtogroup BilinearInterpolate
+ * @{
+ */
+
+ /**
+ *
+ * @brief Floating-point bilinear interpolation.
+ * @param[in,out] *S points to an instance of the interpolation structure.
+ * @param[in] X interpolation coordinate.
+ * @param[in] Y interpolation coordinate.
+ * @return out interpolated value.
+ */
+
+
+ static __INLINE float32_t arm_bilinear_interp_f32(
+ const arm_bilinear_interp_instance_f32 * S,
+ float32_t X,
+ float32_t Y)
+ {
+ float32_t out;
+ float32_t f00, f01, f10, f11;
+ float32_t *pData = S->pData;
+ int32_t xIndex, yIndex, index;
+ float32_t xdiff, ydiff;
+ float32_t b1, b2, b3, b4;
+
+ xIndex = (int32_t) X;
+ yIndex = (int32_t) Y;
+
+ /* Care taken for table outside boundary */
+ /* Returns zero output when values are outside table boundary */
+ if(xIndex < 0 || xIndex > (S->numRows-1) || yIndex < 0 || yIndex > ( S->numCols-1))
+ {
+ return(0);
+ }
+
+ /* Calculation of index for two nearest points in X-direction */
+ index = (xIndex - 1) + (yIndex-1) * S->numCols ;
+
+
+ /* Read two nearest points in X-direction */
+ f00 = pData[index];
+ f01 = pData[index + 1];
+
+ /* Calculation of index for two nearest points in Y-direction */
+ index = (xIndex-1) + (yIndex) * S->numCols;
+
+
+ /* Read two nearest points in Y-direction */
+ f10 = pData[index];
+ f11 = pData[index + 1];
+
+ /* Calculation of intermediate values */
+ b1 = f00;
+ b2 = f01 - f00;
+ b3 = f10 - f00;
+ b4 = f00 - f01 - f10 + f11;
+
+ /* Calculation of fractional part in X */
+ xdiff = X - xIndex;
+
+ /* Calculation of fractional part in Y */
+ ydiff = Y - yIndex;
+
+ /* Calculation of bi-linear interpolated output */
+ out = b1 + b2 * xdiff + b3 * ydiff + b4 * xdiff * ydiff;
+
+ /* return to application */
+ return (out);
+
+ }
+
+ /**
+ *
+ * @brief Q31 bilinear interpolation.
+ * @param[in,out] *S points to an instance of the interpolation structure.
+ * @param[in] X interpolation coordinate in 12.20 format.
+ * @param[in] Y interpolation coordinate in 12.20 format.
+ * @return out interpolated value.
+ */
+
+ static __INLINE q31_t arm_bilinear_interp_q31(
+ arm_bilinear_interp_instance_q31 * S,
+ q31_t X,
+ q31_t Y)
+ {
+ q31_t out; /* Temporary output */
+ q31_t acc = 0; /* output */
+ q31_t xfract, yfract; /* X, Y fractional parts */
+ q31_t x1, x2, y1, y2; /* Nearest output values */
+ int32_t rI, cI; /* Row and column indices */
+ q31_t *pYData = S->pData; /* pointer to output table values */
+ uint32_t nCols = S->numCols; /* num of rows */
+
+
+ /* Input is in 12.20 format */
+ /* 12 bits for the table index */
+ /* Index value calculation */
+ rI = ((X & 0xFFF00000) >> 20u);
+
+ /* Input is in 12.20 format */
+ /* 12 bits for the table index */
+ /* Index value calculation */
+ cI = ((Y & 0xFFF00000) >> 20u);
+
+ /* Care taken for table outside boundary */
+ /* Returns zero output when values are outside table boundary */
+ if(rI < 0 || rI > (S->numRows-1) || cI < 0 || cI > ( S->numCols-1))
+ {
+ return(0);
+ }
+
+ /* 20 bits for the fractional part */
+ /* shift left xfract by 11 to keep 1.31 format */
+ xfract = (X & 0x000FFFFF) << 11u;
+
+ /* Read two nearest output values from the index */
+ x1 = pYData[(rI) + nCols * (cI)];
+ x2 = pYData[(rI) + nCols * (cI) + 1u];
+
+ /* 20 bits for the fractional part */
+ /* shift left yfract by 11 to keep 1.31 format */
+ yfract = (Y & 0x000FFFFF) << 11u;
+
+ /* Read two nearest output values from the index */
+ y1 = pYData[(rI) + nCols * (cI + 1)];
+ y2 = pYData[(rI) + nCols * (cI + 1) + 1u];
+
+ /* Calculation of x1 * (1-xfract ) * (1-yfract) and acc is in 3.29(q29) format */
+ out = ((q31_t) (((q63_t) x1 * (0x7FFFFFFF - xfract)) >> 32));
+ acc = ((q31_t) (((q63_t) out * (0x7FFFFFFF - yfract)) >> 32));
+
+ /* x2 * (xfract) * (1-yfract) in 3.29(q29) and adding to acc */
+ out = ((q31_t) ((q63_t) x2 * (0x7FFFFFFF - yfract) >> 32));
+ acc += ((q31_t) ((q63_t) out * (xfract) >> 32));
+
+ /* y1 * (1 - xfract) * (yfract) in 3.29(q29) and adding to acc */
+ out = ((q31_t) ((q63_t) y1 * (0x7FFFFFFF - xfract) >> 32));
+ acc += ((q31_t) ((q63_t) out * (yfract) >> 32));
+
+ /* y2 * (xfract) * (yfract) in 3.29(q29) and adding to acc */
+ out = ((q31_t) ((q63_t) y2 * (xfract) >> 32));
+ acc += ((q31_t) ((q63_t) out * (yfract) >> 32));
+
+ /* Convert acc to 1.31(q31) format */
+ return (acc << 2u);
+
+ }
+
+ /**
+ * @brief Q15 bilinear interpolation.
+ * @param[in,out] *S points to an instance of the interpolation structure.
+ * @param[in] X interpolation coordinate in 12.20 format.
+ * @param[in] Y interpolation coordinate in 12.20 format.
+ * @return out interpolated value.
+ */
+
+ static __INLINE q15_t arm_bilinear_interp_q15(
+ arm_bilinear_interp_instance_q15 * S,
+ q31_t X,
+ q31_t Y)
+ {
+ q63_t acc = 0; /* output */
+ q31_t out; /* Temporary output */
+ q15_t x1, x2, y1, y2; /* Nearest output values */
+ q31_t xfract, yfract; /* X, Y fractional parts */
+ int32_t rI, cI; /* Row and column indices */
+ q15_t *pYData = S->pData; /* pointer to output table values */
+ uint32_t nCols = S->numCols; /* num of rows */
+
+ /* Input is in 12.20 format */
+ /* 12 bits for the table index */
+ /* Index value calculation */
+ rI = ((X & 0xFFF00000) >> 20);
+
+ /* Input is in 12.20 format */
+ /* 12 bits for the table index */
+ /* Index value calculation */
+ cI = ((Y & 0xFFF00000) >> 20);
+
+ /* Care taken for table outside boundary */
+ /* Returns zero output when values are outside table boundary */
+ if(rI < 0 || rI > (S->numRows-1) || cI < 0 || cI > ( S->numCols-1))
+ {
+ return(0);
+ }
+
+ /* 20 bits for the fractional part */
+ /* xfract should be in 12.20 format */
+ xfract = (X & 0x000FFFFF);
+
+ /* Read two nearest output values from the index */
+ x1 = pYData[(rI) + nCols * (cI)];
+ x2 = pYData[(rI) + nCols * (cI) + 1u];
+
+
+ /* 20 bits for the fractional part */
+ /* yfract should be in 12.20 format */
+ yfract = (Y & 0x000FFFFF);
+
+ /* Read two nearest output values from the index */
+ y1 = pYData[(rI) + nCols * (cI + 1)];
+ y2 = pYData[(rI) + nCols * (cI + 1) + 1u];
+
+ /* Calculation of x1 * (1-xfract ) * (1-yfract) and acc is in 13.51 format */
+
+ /* x1 is in 1.15(q15), xfract in 12.20 format and out is in 13.35 format */
+ /* convert 13.35 to 13.31 by right shifting and out is in 1.31 */
+ out = (q31_t) (((q63_t) x1 * (0xFFFFF - xfract)) >> 4u);
+ acc = ((q63_t) out * (0xFFFFF - yfract));
+
+ /* x2 * (xfract) * (1-yfract) in 1.51 and adding to acc */
+ out = (q31_t) (((q63_t) x2 * (0xFFFFF - yfract)) >> 4u);
+ acc += ((q63_t) out * (xfract));
+
+ /* y1 * (1 - xfract) * (yfract) in 1.51 and adding to acc */
+ out = (q31_t) (((q63_t) y1 * (0xFFFFF - xfract)) >> 4u);
+ acc += ((q63_t) out * (yfract));
+
+ /* y2 * (xfract) * (yfract) in 1.51 and adding to acc */
+ out = (q31_t) (((q63_t) y2 * (xfract)) >> 4u);
+ acc += ((q63_t) out * (yfract));
+
+ /* acc is in 13.51 format and down shift acc by 36 times */
+ /* Convert out to 1.15 format */
+ return (acc >> 36);
+
+ }
+
+ /**
+ * @brief Q7 bilinear interpolation.
+ * @param[in,out] *S points to an instance of the interpolation structure.
+ * @param[in] X interpolation coordinate in 12.20 format.
+ * @param[in] Y interpolation coordinate in 12.20 format.
+ * @return out interpolated value.
+ */
+
+ static __INLINE q7_t arm_bilinear_interp_q7(
+ arm_bilinear_interp_instance_q7 * S,
+ q31_t X,
+ q31_t Y)
+ {
+ q63_t acc = 0; /* output */
+ q31_t out; /* Temporary output */
+ q31_t xfract, yfract; /* X, Y fractional parts */
+ q7_t x1, x2, y1, y2; /* Nearest output values */
+ int32_t rI, cI; /* Row and column indices */
+ q7_t *pYData = S->pData; /* pointer to output table values */
+ uint32_t nCols = S->numCols; /* num of rows */
+
+ /* Input is in 12.20 format */
+ /* 12 bits for the table index */
+ /* Index value calculation */
+ rI = ((X & 0xFFF00000) >> 20);
+
+ /* Input is in 12.20 format */
+ /* 12 bits for the table index */
+ /* Index value calculation */
+ cI = ((Y & 0xFFF00000) >> 20);
+
+ /* Care taken for table outside boundary */
+ /* Returns zero output when values are outside table boundary */
+ if(rI < 0 || rI > (S->numRows-1) || cI < 0 || cI > ( S->numCols-1))
+ {
+ return(0);
+ }
+
+ /* 20 bits for the fractional part */
+ /* xfract should be in 12.20 format */
+ xfract = (X & 0x000FFFFF);
+
+ /* Read two nearest output values from the index */
+ x1 = pYData[(rI) + nCols * (cI)];
+ x2 = pYData[(rI) + nCols * (cI) + 1u];
+
+
+ /* 20 bits for the fractional part */
+ /* yfract should be in 12.20 format */
+ yfract = (Y & 0x000FFFFF);
+
+ /* Read two nearest output values from the index */
+ y1 = pYData[(rI) + nCols * (cI + 1)];
+ y2 = pYData[(rI) + nCols * (cI + 1) + 1u];
+
+ /* Calculation of x1 * (1-xfract ) * (1-yfract) and acc is in 16.47 format */
+ out = ((x1 * (0xFFFFF - xfract)));
+ acc = (((q63_t) out * (0xFFFFF - yfract)));
+
+ /* x2 * (xfract) * (1-yfract) in 2.22 and adding to acc */
+ out = ((x2 * (0xFFFFF - yfract)));
+ acc += (((q63_t) out * (xfract)));
+
+ /* y1 * (1 - xfract) * (yfract) in 2.22 and adding to acc */
+ out = ((y1 * (0xFFFFF - xfract)));
+ acc += (((q63_t) out * (yfract)));
+
+ /* y2 * (xfract) * (yfract) in 2.22 and adding to acc */
+ out = ((y2 * (yfract)));
+ acc += (((q63_t) out * (xfract)));
+
+ /* acc in 16.47 format and down shift by 40 to convert to 1.7 format */
+ return (acc >> 40);
+
+ }
+
+ /**
+ * @} end of BilinearInterpolate group
+ */
+
+
+
+
+
+
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif /* _ARM_MATH_H */
+
+
+/**
+ *
+ * End of file.
+ */
diff --git a/os/ports/common/ARMCMx/CMSIS/include/core_cm0.h b/os/ports/common/ARMCMx/CMSIS/include/core_cm0.h new file mode 100644 index 000000000..edd522173 --- /dev/null +++ b/os/ports/common/ARMCMx/CMSIS/include/core_cm0.h @@ -0,0 +1,665 @@ +/**************************************************************************//**
+ * @file core_cm0.h
+ * @brief CMSIS Cortex-M0 Core Peripheral Access Layer Header File
+ * @version V2.10
+ * @date 19. July 2011
+ *
+ * @note
+ * Copyright (C) 2009-2011 ARM Limited. All rights reserved.
+ *
+ * @par
+ * ARM Limited (ARM) is supplying this software for use with Cortex-M
+ * processor based microcontrollers. This file can be freely distributed
+ * within development tools that are supporting such ARM based processors.
+ *
+ * @par
+ * THIS SOFTWARE IS PROVIDED "AS IS". NO WARRANTIES, WHETHER EXPRESS, IMPLIED
+ * OR STATUTORY, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE.
+ * ARM SHALL NOT, IN ANY CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR
+ * CONSEQUENTIAL DAMAGES, FOR ANY REASON WHATSOEVER.
+ *
+ ******************************************************************************/
+#if defined ( __ICCARM__ )
+ #pragma system_include /* treat file as system include file for MISRA check */
+#endif
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#ifndef __CORE_CM0_H_GENERIC
+#define __CORE_CM0_H_GENERIC
+
+
+/** \mainpage CMSIS Cortex-M0
+
+ This documentation describes the CMSIS Cortex-M Core Peripheral Access Layer.
+ It consists of:
+
+ - Cortex-M Core Register Definitions
+ - Cortex-M functions
+ - Cortex-M instructions
+
+ The CMSIS Cortex-M0 Core Peripheral Access Layer contains C and assembly functions that ease
+ access to the Cortex-M Core
+ */
+
+/** \defgroup CMSIS_MISRA_Exceptions CMSIS MISRA-C:2004 Compliance Exceptions
+ CMSIS violates following MISRA-C2004 Rules:
+
+ - Violates MISRA 2004 Required Rule 8.5, object/function definition in header file.<br>
+ Function definitions in header files are used to allow 'inlining'.
+
+ - Violates MISRA 2004 Required Rule 18.4, declaration of union type or object of union type: '{...}'.<br>
+ Unions are used for effective representation of core registers.
+
+ - Violates MISRA 2004 Advisory Rule 19.7, Function-like macro defined.<br>
+ Function-like macros are used to allow more efficient code.
+
+ */
+
+
+/*******************************************************************************
+ * CMSIS definitions
+ ******************************************************************************/
+/** \defgroup CMSIS_core_definitions CMSIS Core Definitions
+ This file defines all structures and symbols for CMSIS core:
+ - CMSIS version number
+ - Cortex-M core
+ - Cortex-M core Revision Number
+ @{
+ */
+
+/* CMSIS CM0 definitions */
+#define __CM0_CMSIS_VERSION_MAIN (0x02) /*!< [31:16] CMSIS HAL main version */
+#define __CM0_CMSIS_VERSION_SUB (0x10) /*!< [15:0] CMSIS HAL sub version */
+#define __CM0_CMSIS_VERSION ((__CM0_CMSIS_VERSION_MAIN << 16) | __CM0_CMSIS_VERSION_SUB) /*!< CMSIS HAL version number */
+
+#define __CORTEX_M (0x00) /*!< Cortex core */
+
+
+#if defined ( __CC_ARM )
+ #define __ASM __asm /*!< asm keyword for ARM Compiler */
+ #define __INLINE __inline /*!< inline keyword for ARM Compiler */
+
+#elif defined ( __ICCARM__ )
+ #define __ASM __asm /*!< asm keyword for IAR Compiler */
+ #define __INLINE inline /*!< inline keyword for IAR Compiler. Only available in High optimization mode! */
+
+#elif defined ( __GNUC__ )
+ #define __ASM __asm /*!< asm keyword for GNU Compiler */
+ #define __INLINE inline /*!< inline keyword for GNU Compiler */
+
+#elif defined ( __TASKING__ )
+ #define __ASM __asm /*!< asm keyword for TASKING Compiler */
+ #define __INLINE inline /*!< inline keyword for TASKING Compiler */
+
+#endif
+
+/*!< __FPU_USED to be checked prior to making use of FPU specific registers and functions */
+#define __FPU_USED 0
+
+#if defined ( __CC_ARM )
+ #if defined __TARGET_FPU_VFP
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+#elif defined ( __ICCARM__ )
+ #if defined __ARMVFP__
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __GNUC__ )
+ #if defined (__VFP_FP__) && !defined(__SOFTFP__)
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __TASKING__ )
+ /* add preprocessor checks */
+#endif
+
+#include <stdint.h> /*!< standard types definitions */
+#include "core_cmInstr.h" /*!< Core Instruction Access */
+#include "core_cmFunc.h" /*!< Core Function Access */
+
+#endif /* __CORE_CM0_H_GENERIC */
+
+#ifndef __CMSIS_GENERIC
+
+#ifndef __CORE_CM0_H_DEPENDANT
+#define __CORE_CM0_H_DEPENDANT
+
+/* check device defines and use defaults */
+#if defined __CHECK_DEVICE_DEFINES
+ #ifndef __CM0_REV
+ #define __CM0_REV 0x0000
+ #warning "__CM0_REV not defined in device header file; using default!"
+ #endif
+
+ #ifndef __NVIC_PRIO_BITS
+ #define __NVIC_PRIO_BITS 2
+ #warning "__NVIC_PRIO_BITS not defined in device header file; using default!"
+ #endif
+
+ #ifndef __Vendor_SysTickConfig
+ #define __Vendor_SysTickConfig 0
+ #warning "__Vendor_SysTickConfig not defined in device header file; using default!"
+ #endif
+#endif
+
+/* IO definitions (access restrictions to peripheral registers) */
+#ifdef __cplusplus
+ #define __I volatile /*!< defines 'read only' permissions */
+#else
+ #define __I volatile const /*!< defines 'read only' permissions */
+#endif
+#define __O volatile /*!< defines 'write only' permissions */
+#define __IO volatile /*!< defines 'read / write' permissions */
+
+/*@} end of group CMSIS_core_definitions */
+
+
+
+/*******************************************************************************
+ * Register Abstraction
+ ******************************************************************************/
+/** \defgroup CMSIS_core_register CMSIS Core Register
+ Core Register contain:
+ - Core Register
+ - Core NVIC Register
+ - Core SCB Register
+ - Core SysTick Register
+*/
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_CORE CMSIS Core
+ Type definitions for the Cortex-M Core Registers
+ @{
+ */
+
+/** \brief Union type to access the Application Program Status Register (APSR).
+ */
+typedef union
+{
+ struct
+ {
+#if (__CORTEX_M != 0x04)
+ uint32_t _reserved0:27; /*!< bit: 0..26 Reserved */
+#else
+ uint32_t _reserved0:16; /*!< bit: 0..15 Reserved */
+ uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */
+ uint32_t _reserved1:7; /*!< bit: 20..26 Reserved */
+#endif
+ uint32_t Q:1; /*!< bit: 27 Saturation condition flag */
+ uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
+ uint32_t C:1; /*!< bit: 29 Carry condition code flag */
+ uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
+ uint32_t N:1; /*!< bit: 31 Negative condition code flag */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} APSR_Type;
+
+
+/** \brief Union type to access the Interrupt Program Status Register (IPSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
+ uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} IPSR_Type;
+
+
+/** \brief Union type to access the Special-Purpose Program Status Registers (xPSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
+#if (__CORTEX_M != 0x04)
+ uint32_t _reserved0:15; /*!< bit: 9..23 Reserved */
+#else
+ uint32_t _reserved0:7; /*!< bit: 9..15 Reserved */
+ uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */
+ uint32_t _reserved1:4; /*!< bit: 20..23 Reserved */
+#endif
+ uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */
+ uint32_t IT:2; /*!< bit: 25..26 saved IT state (read 0) */
+ uint32_t Q:1; /*!< bit: 27 Saturation condition flag */
+ uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
+ uint32_t C:1; /*!< bit: 29 Carry condition code flag */
+ uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
+ uint32_t N:1; /*!< bit: 31 Negative condition code flag */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} xPSR_Type;
+
+
+/** \brief Union type to access the Control Registers (CONTROL).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */
+ uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */
+ uint32_t FPCA:1; /*!< bit: 2 FP extension active flag */
+ uint32_t _reserved0:29; /*!< bit: 3..31 Reserved */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} CONTROL_Type;
+
+/*@} end of group CMSIS_CORE */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_NVIC CMSIS NVIC
+ Type definitions for the Cortex-M NVIC Registers
+ @{
+ */
+
+/** \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC).
+ */
+typedef struct
+{
+ __IO uint32_t ISER[1]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */
+ uint32_t RESERVED0[31];
+ __IO uint32_t ICER[1]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */
+ uint32_t RSERVED1[31];
+ __IO uint32_t ISPR[1]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */
+ uint32_t RESERVED2[31];
+ __IO uint32_t ICPR[1]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */
+ uint32_t RESERVED3[31];
+ uint32_t RESERVED4[64];
+ __IO uint32_t IP[8]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register */
+} NVIC_Type;
+
+/*@} end of group CMSIS_NVIC */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_SCB CMSIS SCB
+ Type definitions for the Cortex-M System Control Block Registers
+ @{
+ */
+
+/** \brief Structure type to access the System Control Block (SCB).
+ */
+typedef struct
+{
+ __I uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */
+ __IO uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */
+ uint32_t RESERVED0;
+ __IO uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */
+ __IO uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */
+ __IO uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */
+ uint32_t RESERVED1;
+ __IO uint32_t SHP[2]; /*!< Offset: 0x01C (R/W) System Handlers Priority Registers. [0] is RESERVED */
+ __IO uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */
+} SCB_Type;
+
+/* SCB CPUID Register Definitions */
+#define SCB_CPUID_IMPLEMENTER_Pos 24 /*!< SCB CPUID: IMPLEMENTER Position */
+#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */
+
+#define SCB_CPUID_VARIANT_Pos 20 /*!< SCB CPUID: VARIANT Position */
+#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */
+
+#define SCB_CPUID_ARCHITECTURE_Pos 16 /*!< SCB CPUID: ARCHITECTURE Position */
+#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */
+
+#define SCB_CPUID_PARTNO_Pos 4 /*!< SCB CPUID: PARTNO Position */
+#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */
+
+#define SCB_CPUID_REVISION_Pos 0 /*!< SCB CPUID: REVISION Position */
+#define SCB_CPUID_REVISION_Msk (0xFUL << SCB_CPUID_REVISION_Pos) /*!< SCB CPUID: REVISION Mask */
+
+/* SCB Interrupt Control State Register Definitions */
+#define SCB_ICSR_NMIPENDSET_Pos 31 /*!< SCB ICSR: NMIPENDSET Position */
+#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */
+
+#define SCB_ICSR_PENDSVSET_Pos 28 /*!< SCB ICSR: PENDSVSET Position */
+#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */
+
+#define SCB_ICSR_PENDSVCLR_Pos 27 /*!< SCB ICSR: PENDSVCLR Position */
+#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */
+
+#define SCB_ICSR_PENDSTSET_Pos 26 /*!< SCB ICSR: PENDSTSET Position */
+#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */
+
+#define SCB_ICSR_PENDSTCLR_Pos 25 /*!< SCB ICSR: PENDSTCLR Position */
+#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */
+
+#define SCB_ICSR_ISRPREEMPT_Pos 23 /*!< SCB ICSR: ISRPREEMPT Position */
+#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */
+
+#define SCB_ICSR_ISRPENDING_Pos 22 /*!< SCB ICSR: ISRPENDING Position */
+#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */
+
+#define SCB_ICSR_VECTPENDING_Pos 12 /*!< SCB ICSR: VECTPENDING Position */
+#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */
+
+#define SCB_ICSR_VECTACTIVE_Pos 0 /*!< SCB ICSR: VECTACTIVE Position */
+#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL << SCB_ICSR_VECTACTIVE_Pos) /*!< SCB ICSR: VECTACTIVE Mask */
+
+/* SCB Application Interrupt and Reset Control Register Definitions */
+#define SCB_AIRCR_VECTKEY_Pos 16 /*!< SCB AIRCR: VECTKEY Position */
+#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */
+
+#define SCB_AIRCR_VECTKEYSTAT_Pos 16 /*!< SCB AIRCR: VECTKEYSTAT Position */
+#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */
+
+#define SCB_AIRCR_ENDIANESS_Pos 15 /*!< SCB AIRCR: ENDIANESS Position */
+#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */
+
+#define SCB_AIRCR_SYSRESETREQ_Pos 2 /*!< SCB AIRCR: SYSRESETREQ Position */
+#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */
+
+#define SCB_AIRCR_VECTCLRACTIVE_Pos 1 /*!< SCB AIRCR: VECTCLRACTIVE Position */
+#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */
+
+/* SCB System Control Register Definitions */
+#define SCB_SCR_SEVONPEND_Pos 4 /*!< SCB SCR: SEVONPEND Position */
+#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */
+
+#define SCB_SCR_SLEEPDEEP_Pos 2 /*!< SCB SCR: SLEEPDEEP Position */
+#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */
+
+#define SCB_SCR_SLEEPONEXIT_Pos 1 /*!< SCB SCR: SLEEPONEXIT Position */
+#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */
+
+/* SCB Configuration Control Register Definitions */
+#define SCB_CCR_STKALIGN_Pos 9 /*!< SCB CCR: STKALIGN Position */
+#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */
+
+#define SCB_CCR_UNALIGN_TRP_Pos 3 /*!< SCB CCR: UNALIGN_TRP Position */
+#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */
+
+/* SCB System Handler Control and State Register Definitions */
+#define SCB_SHCSR_SVCALLPENDED_Pos 15 /*!< SCB SHCSR: SVCALLPENDED Position */
+#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */
+
+/*@} end of group CMSIS_SCB */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_SysTick CMSIS SysTick
+ Type definitions for the Cortex-M System Timer Registers
+ @{
+ */
+
+/** \brief Structure type to access the System Timer (SysTick).
+ */
+typedef struct
+{
+ __IO uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */
+ __IO uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */
+ __IO uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */
+ __I uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */
+} SysTick_Type;
+
+/* SysTick Control / Status Register Definitions */
+#define SysTick_CTRL_COUNTFLAG_Pos 16 /*!< SysTick CTRL: COUNTFLAG Position */
+#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */
+
+#define SysTick_CTRL_CLKSOURCE_Pos 2 /*!< SysTick CTRL: CLKSOURCE Position */
+#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */
+
+#define SysTick_CTRL_TICKINT_Pos 1 /*!< SysTick CTRL: TICKINT Position */
+#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */
+
+#define SysTick_CTRL_ENABLE_Pos 0 /*!< SysTick CTRL: ENABLE Position */
+#define SysTick_CTRL_ENABLE_Msk (1UL << SysTick_CTRL_ENABLE_Pos) /*!< SysTick CTRL: ENABLE Mask */
+
+/* SysTick Reload Register Definitions */
+#define SysTick_LOAD_RELOAD_Pos 0 /*!< SysTick LOAD: RELOAD Position */
+#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL << SysTick_LOAD_RELOAD_Pos) /*!< SysTick LOAD: RELOAD Mask */
+
+/* SysTick Current Register Definitions */
+#define SysTick_VAL_CURRENT_Pos 0 /*!< SysTick VAL: CURRENT Position */
+#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL << SysTick_VAL_CURRENT_Pos) /*!< SysTick VAL: CURRENT Mask */
+
+/* SysTick Calibration Register Definitions */
+#define SysTick_CALIB_NOREF_Pos 31 /*!< SysTick CALIB: NOREF Position */
+#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */
+
+#define SysTick_CALIB_SKEW_Pos 30 /*!< SysTick CALIB: SKEW Position */
+#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */
+
+#define SysTick_CALIB_TENMS_Pos 0 /*!< SysTick CALIB: TENMS Position */
+#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL << SysTick_VAL_CURRENT_Pos) /*!< SysTick CALIB: TENMS Mask */
+
+/*@} end of group CMSIS_SysTick */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_CoreDebug CMSIS Core Debug
+ Cortex-M0 Core Debug Registers (DCB registers, SHCSR, and DFSR) are only accessible over DAP
+ and not via processor. Therefore they are not covered by the Cortex-M0 header file.
+ @{
+ */
+/*@} end of group CMSIS_CoreDebug */
+
+
+/** \ingroup CMSIS_core_register
+ @{
+ */
+
+/* Memory mapping of Cortex-M0 Hardware */
+#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */
+#define CoreDebug_BASE (0xE000EDF0UL) /*!< Core Debug Base Address */
+#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */
+#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */
+#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */
+
+#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */
+#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */
+#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */
+
+
+/*@} */
+
+
+
+/*******************************************************************************
+ * Hardware Abstraction Layer
+ ******************************************************************************/
+/** \defgroup CMSIS_Core_FunctionInterface CMSIS Core Function Interface
+ Core Function Interface contains:
+ - Core NVIC Functions
+ - Core SysTick Functions
+ - Core Register Access Functions
+*/
+
+
+
+/* ########################## NVIC functions #################################### */
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_NVICFunctions CMSIS Core NVIC Functions
+ @{
+ */
+
+/* Interrupt Priorities are WORD accessible only under ARMv6M */
+/* The following MACROS handle generation of the register offset and byte masks */
+#define _BIT_SHIFT(IRQn) ( (((uint32_t)(IRQn) ) & 0x03) * 8 )
+#define _SHP_IDX(IRQn) ( ((((uint32_t)(IRQn) & 0x0F)-8) >> 2) )
+#define _IP_IDX(IRQn) ( ((uint32_t)(IRQn) >> 2) )
+
+
+/** \brief Enable External Interrupt
+
+ This function enables a device specific interrupt in the NVIC interrupt controller.
+ The interrupt number cannot be a negative value.
+
+ \param [in] IRQn Number of the external interrupt to enable
+ */
+static __INLINE void NVIC_EnableIRQ(IRQn_Type IRQn)
+{
+ NVIC->ISER[0] = (1 << ((uint32_t)(IRQn) & 0x1F));
+}
+
+
+/** \brief Disable External Interrupt
+
+ This function disables a device specific interrupt in the NVIC interrupt controller.
+ The interrupt number cannot be a negative value.
+
+ \param [in] IRQn Number of the external interrupt to disable
+ */
+static __INLINE void NVIC_DisableIRQ(IRQn_Type IRQn)
+{
+ NVIC->ICER[0] = (1 << ((uint32_t)(IRQn) & 0x1F));
+}
+
+
+/** \brief Get Pending Interrupt
+
+ This function reads the pending register in the NVIC and returns the pending bit
+ for the specified interrupt.
+
+ \param [in] IRQn Number of the interrupt for get pending
+ \return 0 Interrupt status is not pending
+ \return 1 Interrupt status is pending
+ */
+static __INLINE uint32_t NVIC_GetPendingIRQ(IRQn_Type IRQn)
+{
+ return((uint32_t) ((NVIC->ISPR[0] & (1 << ((uint32_t)(IRQn) & 0x1F)))?1:0));
+}
+
+
+/** \brief Set Pending Interrupt
+
+ This function sets the pending bit for the specified interrupt.
+ The interrupt number cannot be a negative value.
+
+ \param [in] IRQn Number of the interrupt for set pending
+ */
+static __INLINE void NVIC_SetPendingIRQ(IRQn_Type IRQn)
+{
+ NVIC->ISPR[0] = (1 << ((uint32_t)(IRQn) & 0x1F));
+}
+
+
+/** \brief Clear Pending Interrupt
+
+ This function clears the pending bit for the specified interrupt.
+ The interrupt number cannot be a negative value.
+
+ \param [in] IRQn Number of the interrupt for clear pending
+ */
+static __INLINE void NVIC_ClearPendingIRQ(IRQn_Type IRQn)
+{
+ NVIC->ICPR[0] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* Clear pending interrupt */
+}
+
+
+/** \brief Set Interrupt Priority
+
+ This function sets the priority for the specified interrupt. The interrupt
+ number can be positive to specify an external (device specific)
+ interrupt, or negative to specify an internal (core) interrupt.
+
+ Note: The priority cannot be set for every core interrupt.
+
+ \param [in] IRQn Number of the interrupt for set priority
+ \param [in] priority Priority to set
+ */
+static __INLINE void NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority)
+{
+ if(IRQn < 0) {
+ SCB->SHP[_SHP_IDX(IRQn)] = (SCB->SHP[_SHP_IDX(IRQn)] & ~(0xFF << _BIT_SHIFT(IRQn))) |
+ (((priority << (8 - __NVIC_PRIO_BITS)) & 0xFF) << _BIT_SHIFT(IRQn)); }
+ else {
+ NVIC->IP[_IP_IDX(IRQn)] = (NVIC->IP[_IP_IDX(IRQn)] & ~(0xFF << _BIT_SHIFT(IRQn))) |
+ (((priority << (8 - __NVIC_PRIO_BITS)) & 0xFF) << _BIT_SHIFT(IRQn)); }
+}
+
+
+/** \brief Get Interrupt Priority
+
+ This function reads the priority for the specified interrupt. The interrupt
+ number can be positive to specify an external (device specific)
+ interrupt, or negative to specify an internal (core) interrupt.
+
+ The returned priority value is automatically aligned to the implemented
+ priority bits of the microcontroller.
+
+ \param [in] IRQn Number of the interrupt for get priority
+ \return Interrupt Priority
+ */
+static __INLINE uint32_t NVIC_GetPriority(IRQn_Type IRQn)
+{
+
+ if(IRQn < 0) {
+ return((uint32_t)((SCB->SHP[_SHP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) >> (8 - __NVIC_PRIO_BITS))); } /* get priority for Cortex-M0 system interrupts */
+ else {
+ return((uint32_t)((NVIC->IP[ _IP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) >> (8 - __NVIC_PRIO_BITS))); } /* get priority for device specific interrupts */
+}
+
+
+/** \brief System Reset
+
+ This function initiate a system reset request to reset the MCU.
+ */
+static __INLINE void NVIC_SystemReset(void)
+{
+ __DSB(); /* Ensure all outstanding memory accesses included
+ buffered write are completed before reset */
+ SCB->AIRCR = ((0x5FA << SCB_AIRCR_VECTKEY_Pos) |
+ SCB_AIRCR_SYSRESETREQ_Msk);
+ __DSB(); /* Ensure completion of memory access */
+ while(1); /* wait until reset */
+}
+
+/*@} end of CMSIS_Core_NVICFunctions */
+
+
+
+/* ################################## SysTick function ############################################ */
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_SysTickFunctions CMSIS Core SysTick Functions
+ @{
+ */
+
+#if (__Vendor_SysTickConfig == 0)
+
+/** \brief System Tick Configuration
+
+ This function initialises the system tick timer and its interrupt and start the system tick timer.
+ Counter is in free running mode to generate periodical interrupts.
+
+ \param [in] ticks Number of ticks between two interrupts
+ \return 0 Function succeeded
+ \return 1 Function failed
+ */
+static __INLINE uint32_t SysTick_Config(uint32_t ticks)
+{
+ if (ticks > SysTick_LOAD_RELOAD_Msk) return (1); /* Reload value impossible */
+
+ SysTick->LOAD = (ticks & SysTick_LOAD_RELOAD_Msk) - 1; /* set reload register */
+ NVIC_SetPriority (SysTick_IRQn, (1<<__NVIC_PRIO_BITS) - 1); /* set Priority for Cortex-M0 System Interrupts */
+ SysTick->VAL = 0; /* Load the SysTick Counter Value */
+ SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk |
+ SysTick_CTRL_TICKINT_Msk |
+ SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */
+ return (0); /* Function successful */
+}
+
+#endif
+
+/*@} end of CMSIS_Core_SysTickFunctions */
+
+
+
+
+#endif /* __CORE_CM0_H_DEPENDANT */
+
+#endif /* __CMSIS_GENERIC */
+
+#ifdef __cplusplus
+}
+#endif
diff --git a/os/ports/common/ARMCMx/CMSIS/include/core_cm3.h b/os/ports/common/ARMCMx/CMSIS/include/core_cm3.h new file mode 100644 index 000000000..c15e10ae2 --- /dev/null +++ b/os/ports/common/ARMCMx/CMSIS/include/core_cm3.h @@ -0,0 +1,1236 @@ +/**************************************************************************//**
+ * @file core_cm3.h
+ * @brief CMSIS Cortex-M3 Core Peripheral Access Layer Header File
+ * @version V2.10
+ * @date 19. July 2011
+ *
+ * @note
+ * Copyright (C) 2009-2011 ARM Limited. All rights reserved.
+ *
+ * @par
+ * ARM Limited (ARM) is supplying this software for use with Cortex-M
+ * processor based microcontrollers. This file can be freely distributed
+ * within development tools that are supporting such ARM based processors.
+ *
+ * @par
+ * THIS SOFTWARE IS PROVIDED "AS IS". NO WARRANTIES, WHETHER EXPRESS, IMPLIED
+ * OR STATUTORY, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE.
+ * ARM SHALL NOT, IN ANY CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR
+ * CONSEQUENTIAL DAMAGES, FOR ANY REASON WHATSOEVER.
+ *
+ ******************************************************************************/
+#if defined ( __ICCARM__ )
+ #pragma system_include /* treat file as system include file for MISRA check */
+#endif
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#ifndef __CORE_CM3_H_GENERIC
+#define __CORE_CM3_H_GENERIC
+
+
+/** \mainpage CMSIS Cortex-M3
+
+ This documentation describes the CMSIS Cortex-M Core Peripheral Access Layer.
+ It consists of:
+
+ - Cortex-M Core Register Definitions
+ - Cortex-M functions
+ - Cortex-M instructions
+
+ The CMSIS Cortex-M3 Core Peripheral Access Layer contains C and assembly functions that ease
+ access to the Cortex-M Core
+ */
+
+/** \defgroup CMSIS_MISRA_Exceptions CMSIS MISRA-C:2004 Compliance Exceptions
+ CMSIS violates following MISRA-C2004 Rules:
+
+ - Violates MISRA 2004 Required Rule 8.5, object/function definition in header file.<br>
+ Function definitions in header files are used to allow 'inlining'.
+
+ - Violates MISRA 2004 Required Rule 18.4, declaration of union type or object of union type: '{...}'.<br>
+ Unions are used for effective representation of core registers.
+
+ - Violates MISRA 2004 Advisory Rule 19.7, Function-like macro defined.<br>
+ Function-like macros are used to allow more efficient code.
+
+ */
+
+
+/*******************************************************************************
+ * CMSIS definitions
+ ******************************************************************************/
+/** \defgroup CMSIS_core_definitions CMSIS Core Definitions
+ This file defines all structures and symbols for CMSIS core:
+ - CMSIS version number
+ - Cortex-M core
+ - Cortex-M core Revision Number
+ @{
+ */
+
+/* CMSIS CM3 definitions */
+#define __CM3_CMSIS_VERSION_MAIN (0x02) /*!< [31:16] CMSIS HAL main version */
+#define __CM3_CMSIS_VERSION_SUB (0x10) /*!< [15:0] CMSIS HAL sub version */
+#define __CM3_CMSIS_VERSION ((__CM3_CMSIS_VERSION_MAIN << 16) | __CM3_CMSIS_VERSION_SUB) /*!< CMSIS HAL version number */
+
+#define __CORTEX_M (0x03) /*!< Cortex core */
+
+
+#if defined ( __CC_ARM )
+ #define __ASM __asm /*!< asm keyword for ARM Compiler */
+ #define __INLINE __inline /*!< inline keyword for ARM Compiler */
+
+#elif defined ( __ICCARM__ )
+ #define __ASM __asm /*!< asm keyword for IAR Compiler */
+ #define __INLINE inline /*!< inline keyword for IAR Compiler. Only available in High optimization mode! */
+
+#elif defined ( __GNUC__ )
+ #define __ASM __asm /*!< asm keyword for GNU Compiler */
+ #define __INLINE inline /*!< inline keyword for GNU Compiler */
+
+#elif defined ( __TASKING__ )
+ #define __ASM __asm /*!< asm keyword for TASKING Compiler */
+ #define __INLINE inline /*!< inline keyword for TASKING Compiler */
+
+#endif
+
+/*!< __FPU_USED to be checked prior to making use of FPU specific registers and functions */
+#define __FPU_USED 0
+
+#if defined ( __CC_ARM )
+ #if defined __TARGET_FPU_VFP
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+#elif defined ( __ICCARM__ )
+ #if defined __ARMVFP__
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __GNUC__ )
+ #if defined (__VFP_FP__) && !defined(__SOFTFP__)
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __TASKING__ )
+ /* add preprocessor checks */
+#endif
+
+#include <stdint.h> /*!< standard types definitions */
+#include "core_cmInstr.h" /*!< Core Instruction Access */
+#include "core_cmFunc.h" /*!< Core Function Access */
+
+#endif /* __CORE_CM3_H_GENERIC */
+
+#ifndef __CMSIS_GENERIC
+
+#ifndef __CORE_CM3_H_DEPENDANT
+#define __CORE_CM3_H_DEPENDANT
+
+/* check device defines and use defaults */
+#if defined __CHECK_DEVICE_DEFINES
+ #ifndef __CM3_REV
+ #define __CM3_REV 0x0200
+ #warning "__CM3_REV not defined in device header file; using default!"
+ #endif
+
+ #ifndef __MPU_PRESENT
+ #define __MPU_PRESENT 0
+ #warning "__MPU_PRESENT not defined in device header file; using default!"
+ #endif
+
+ #ifndef __NVIC_PRIO_BITS
+ #define __NVIC_PRIO_BITS 4
+ #warning "__NVIC_PRIO_BITS not defined in device header file; using default!"
+ #endif
+
+ #ifndef __Vendor_SysTickConfig
+ #define __Vendor_SysTickConfig 0
+ #warning "__Vendor_SysTickConfig not defined in device header file; using default!"
+ #endif
+#endif
+
+/* IO definitions (access restrictions to peripheral registers) */
+#ifdef __cplusplus
+ #define __I volatile /*!< defines 'read only' permissions */
+#else
+ #define __I volatile const /*!< defines 'read only' permissions */
+#endif
+#define __O volatile /*!< defines 'write only' permissions */
+#define __IO volatile /*!< defines 'read / write' permissions */
+
+/*@} end of group CMSIS_core_definitions */
+
+
+
+/*******************************************************************************
+ * Register Abstraction
+ ******************************************************************************/
+/** \defgroup CMSIS_core_register CMSIS Core Register
+ Core Register contain:
+ - Core Register
+ - Core NVIC Register
+ - Core SCB Register
+ - Core SysTick Register
+ - Core Debug Register
+ - Core MPU Register
+*/
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_CORE CMSIS Core
+ Type definitions for the Cortex-M Core Registers
+ @{
+ */
+
+/** \brief Union type to access the Application Program Status Register (APSR).
+ */
+typedef union
+{
+ struct
+ {
+#if (__CORTEX_M != 0x04)
+ uint32_t _reserved0:27; /*!< bit: 0..26 Reserved */
+#else
+ uint32_t _reserved0:16; /*!< bit: 0..15 Reserved */
+ uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */
+ uint32_t _reserved1:7; /*!< bit: 20..26 Reserved */
+#endif
+ uint32_t Q:1; /*!< bit: 27 Saturation condition flag */
+ uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
+ uint32_t C:1; /*!< bit: 29 Carry condition code flag */
+ uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
+ uint32_t N:1; /*!< bit: 31 Negative condition code flag */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} APSR_Type;
+
+
+/** \brief Union type to access the Interrupt Program Status Register (IPSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
+ uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} IPSR_Type;
+
+
+/** \brief Union type to access the Special-Purpose Program Status Registers (xPSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
+#if (__CORTEX_M != 0x04)
+ uint32_t _reserved0:15; /*!< bit: 9..23 Reserved */
+#else
+ uint32_t _reserved0:7; /*!< bit: 9..15 Reserved */
+ uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */
+ uint32_t _reserved1:4; /*!< bit: 20..23 Reserved */
+#endif
+ uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */
+ uint32_t IT:2; /*!< bit: 25..26 saved IT state (read 0) */
+ uint32_t Q:1; /*!< bit: 27 Saturation condition flag */
+ uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
+ uint32_t C:1; /*!< bit: 29 Carry condition code flag */
+ uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
+ uint32_t N:1; /*!< bit: 31 Negative condition code flag */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} xPSR_Type;
+
+
+/** \brief Union type to access the Control Registers (CONTROL).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */
+ uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */
+ uint32_t FPCA:1; /*!< bit: 2 FP extension active flag */
+ uint32_t _reserved0:29; /*!< bit: 3..31 Reserved */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} CONTROL_Type;
+
+/*@} end of group CMSIS_CORE */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_NVIC CMSIS NVIC
+ Type definitions for the Cortex-M NVIC Registers
+ @{
+ */
+
+/** \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC).
+ */
+typedef struct
+{
+ __IO uint32_t ISER[8]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */
+ uint32_t RESERVED0[24];
+ __IO uint32_t ICER[8]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */
+ uint32_t RSERVED1[24];
+ __IO uint32_t ISPR[8]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */
+ uint32_t RESERVED2[24];
+ __IO uint32_t ICPR[8]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */
+ uint32_t RESERVED3[24];
+ __IO uint32_t IABR[8]; /*!< Offset: 0x200 (R/W) Interrupt Active bit Register */
+ uint32_t RESERVED4[56];
+ __IO uint8_t IP[240]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register (8Bit wide) */
+ uint32_t RESERVED5[644];
+ __O uint32_t STIR; /*!< Offset: 0xE00 ( /W) Software Trigger Interrupt Register */
+} NVIC_Type;
+
+/* Software Triggered Interrupt Register Definitions */
+#define NVIC_STIR_INTID_Pos 0 /*!< STIR: INTLINESNUM Position */
+#define NVIC_STIR_INTID_Msk (0x1FFUL << NVIC_STIR_INTID_Pos) /*!< STIR: INTLINESNUM Mask */
+
+/*@} end of group CMSIS_NVIC */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_SCB CMSIS SCB
+ Type definitions for the Cortex-M System Control Block Registers
+ @{
+ */
+
+/** \brief Structure type to access the System Control Block (SCB).
+ */
+typedef struct
+{
+ __I uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */
+ __IO uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */
+ __IO uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */
+ __IO uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */
+ __IO uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */
+ __IO uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */
+ __IO uint8_t SHP[12]; /*!< Offset: 0x018 (R/W) System Handlers Priority Registers (4-7, 8-11, 12-15) */
+ __IO uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */
+ __IO uint32_t CFSR; /*!< Offset: 0x028 (R/W) Configurable Fault Status Register */
+ __IO uint32_t HFSR; /*!< Offset: 0x02C (R/W) HardFault Status Register */
+ __IO uint32_t DFSR; /*!< Offset: 0x030 (R/W) Debug Fault Status Register */
+ __IO uint32_t MMFAR; /*!< Offset: 0x034 (R/W) MemManage Fault Address Register */
+ __IO uint32_t BFAR; /*!< Offset: 0x038 (R/W) BusFault Address Register */
+ __IO uint32_t AFSR; /*!< Offset: 0x03C (R/W) Auxiliary Fault Status Register */
+ __I uint32_t PFR[2]; /*!< Offset: 0x040 (R/ ) Processor Feature Register */
+ __I uint32_t DFR; /*!< Offset: 0x048 (R/ ) Debug Feature Register */
+ __I uint32_t ADR; /*!< Offset: 0x04C (R/ ) Auxiliary Feature Register */
+ __I uint32_t MMFR[4]; /*!< Offset: 0x050 (R/ ) Memory Model Feature Register */
+ __I uint32_t ISAR[5]; /*!< Offset: 0x060 (R/ ) Instruction Set Attributes Register */
+ uint32_t RESERVED0[5];
+ __IO uint32_t CPACR; /*!< Offset: 0x088 (R/W) Coprocessor Access Control Register */
+} SCB_Type;
+
+/* SCB CPUID Register Definitions */
+#define SCB_CPUID_IMPLEMENTER_Pos 24 /*!< SCB CPUID: IMPLEMENTER Position */
+#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */
+
+#define SCB_CPUID_VARIANT_Pos 20 /*!< SCB CPUID: VARIANT Position */
+#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */
+
+#define SCB_CPUID_ARCHITECTURE_Pos 16 /*!< SCB CPUID: ARCHITECTURE Position */
+#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */
+
+#define SCB_CPUID_PARTNO_Pos 4 /*!< SCB CPUID: PARTNO Position */
+#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */
+
+#define SCB_CPUID_REVISION_Pos 0 /*!< SCB CPUID: REVISION Position */
+#define SCB_CPUID_REVISION_Msk (0xFUL << SCB_CPUID_REVISION_Pos) /*!< SCB CPUID: REVISION Mask */
+
+/* SCB Interrupt Control State Register Definitions */
+#define SCB_ICSR_NMIPENDSET_Pos 31 /*!< SCB ICSR: NMIPENDSET Position */
+#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */
+
+#define SCB_ICSR_PENDSVSET_Pos 28 /*!< SCB ICSR: PENDSVSET Position */
+#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */
+
+#define SCB_ICSR_PENDSVCLR_Pos 27 /*!< SCB ICSR: PENDSVCLR Position */
+#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */
+
+#define SCB_ICSR_PENDSTSET_Pos 26 /*!< SCB ICSR: PENDSTSET Position */
+#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */
+
+#define SCB_ICSR_PENDSTCLR_Pos 25 /*!< SCB ICSR: PENDSTCLR Position */
+#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */
+
+#define SCB_ICSR_ISRPREEMPT_Pos 23 /*!< SCB ICSR: ISRPREEMPT Position */
+#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */
+
+#define SCB_ICSR_ISRPENDING_Pos 22 /*!< SCB ICSR: ISRPENDING Position */
+#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */
+
+#define SCB_ICSR_VECTPENDING_Pos 12 /*!< SCB ICSR: VECTPENDING Position */
+#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */
+
+#define SCB_ICSR_RETTOBASE_Pos 11 /*!< SCB ICSR: RETTOBASE Position */
+#define SCB_ICSR_RETTOBASE_Msk (1UL << SCB_ICSR_RETTOBASE_Pos) /*!< SCB ICSR: RETTOBASE Mask */
+
+#define SCB_ICSR_VECTACTIVE_Pos 0 /*!< SCB ICSR: VECTACTIVE Position */
+#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL << SCB_ICSR_VECTACTIVE_Pos) /*!< SCB ICSR: VECTACTIVE Mask */
+
+/* SCB Vector Table Offset Register Definitions */
+#define SCB_VTOR_TBLOFF_Pos 7 /*!< SCB VTOR: TBLOFF Position */
+#define SCB_VTOR_TBLOFF_Msk (0x1FFFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */
+
+/* SCB Application Interrupt and Reset Control Register Definitions */
+#define SCB_AIRCR_VECTKEY_Pos 16 /*!< SCB AIRCR: VECTKEY Position */
+#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */
+
+#define SCB_AIRCR_VECTKEYSTAT_Pos 16 /*!< SCB AIRCR: VECTKEYSTAT Position */
+#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */
+
+#define SCB_AIRCR_ENDIANESS_Pos 15 /*!< SCB AIRCR: ENDIANESS Position */
+#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */
+
+#define SCB_AIRCR_PRIGROUP_Pos 8 /*!< SCB AIRCR: PRIGROUP Position */
+#define SCB_AIRCR_PRIGROUP_Msk (7UL << SCB_AIRCR_PRIGROUP_Pos) /*!< SCB AIRCR: PRIGROUP Mask */
+
+#define SCB_AIRCR_SYSRESETREQ_Pos 2 /*!< SCB AIRCR: SYSRESETREQ Position */
+#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */
+
+#define SCB_AIRCR_VECTCLRACTIVE_Pos 1 /*!< SCB AIRCR: VECTCLRACTIVE Position */
+#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */
+
+#define SCB_AIRCR_VECTRESET_Pos 0 /*!< SCB AIRCR: VECTRESET Position */
+#define SCB_AIRCR_VECTRESET_Msk (1UL << SCB_AIRCR_VECTRESET_Pos) /*!< SCB AIRCR: VECTRESET Mask */
+
+/* SCB System Control Register Definitions */
+#define SCB_SCR_SEVONPEND_Pos 4 /*!< SCB SCR: SEVONPEND Position */
+#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */
+
+#define SCB_SCR_SLEEPDEEP_Pos 2 /*!< SCB SCR: SLEEPDEEP Position */
+#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */
+
+#define SCB_SCR_SLEEPONEXIT_Pos 1 /*!< SCB SCR: SLEEPONEXIT Position */
+#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */
+
+/* SCB Configuration Control Register Definitions */
+#define SCB_CCR_STKALIGN_Pos 9 /*!< SCB CCR: STKALIGN Position */
+#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */
+
+#define SCB_CCR_BFHFNMIGN_Pos 8 /*!< SCB CCR: BFHFNMIGN Position */
+#define SCB_CCR_BFHFNMIGN_Msk (1UL << SCB_CCR_BFHFNMIGN_Pos) /*!< SCB CCR: BFHFNMIGN Mask */
+
+#define SCB_CCR_DIV_0_TRP_Pos 4 /*!< SCB CCR: DIV_0_TRP Position */
+#define SCB_CCR_DIV_0_TRP_Msk (1UL << SCB_CCR_DIV_0_TRP_Pos) /*!< SCB CCR: DIV_0_TRP Mask */
+
+#define SCB_CCR_UNALIGN_TRP_Pos 3 /*!< SCB CCR: UNALIGN_TRP Position */
+#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */
+
+#define SCB_CCR_USERSETMPEND_Pos 1 /*!< SCB CCR: USERSETMPEND Position */
+#define SCB_CCR_USERSETMPEND_Msk (1UL << SCB_CCR_USERSETMPEND_Pos) /*!< SCB CCR: USERSETMPEND Mask */
+
+#define SCB_CCR_NONBASETHRDENA_Pos 0 /*!< SCB CCR: NONBASETHRDENA Position */
+#define SCB_CCR_NONBASETHRDENA_Msk (1UL << SCB_CCR_NONBASETHRDENA_Pos) /*!< SCB CCR: NONBASETHRDENA Mask */
+
+/* SCB System Handler Control and State Register Definitions */
+#define SCB_SHCSR_USGFAULTENA_Pos 18 /*!< SCB SHCSR: USGFAULTENA Position */
+#define SCB_SHCSR_USGFAULTENA_Msk (1UL << SCB_SHCSR_USGFAULTENA_Pos) /*!< SCB SHCSR: USGFAULTENA Mask */
+
+#define SCB_SHCSR_BUSFAULTENA_Pos 17 /*!< SCB SHCSR: BUSFAULTENA Position */
+#define SCB_SHCSR_BUSFAULTENA_Msk (1UL << SCB_SHCSR_BUSFAULTENA_Pos) /*!< SCB SHCSR: BUSFAULTENA Mask */
+
+#define SCB_SHCSR_MEMFAULTENA_Pos 16 /*!< SCB SHCSR: MEMFAULTENA Position */
+#define SCB_SHCSR_MEMFAULTENA_Msk (1UL << SCB_SHCSR_MEMFAULTENA_Pos) /*!< SCB SHCSR: MEMFAULTENA Mask */
+
+#define SCB_SHCSR_SVCALLPENDED_Pos 15 /*!< SCB SHCSR: SVCALLPENDED Position */
+#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */
+
+#define SCB_SHCSR_BUSFAULTPENDED_Pos 14 /*!< SCB SHCSR: BUSFAULTPENDED Position */
+#define SCB_SHCSR_BUSFAULTPENDED_Msk (1UL << SCB_SHCSR_BUSFAULTPENDED_Pos) /*!< SCB SHCSR: BUSFAULTPENDED Mask */
+
+#define SCB_SHCSR_MEMFAULTPENDED_Pos 13 /*!< SCB SHCSR: MEMFAULTPENDED Position */
+#define SCB_SHCSR_MEMFAULTPENDED_Msk (1UL << SCB_SHCSR_MEMFAULTPENDED_Pos) /*!< SCB SHCSR: MEMFAULTPENDED Mask */
+
+#define SCB_SHCSR_USGFAULTPENDED_Pos 12 /*!< SCB SHCSR: USGFAULTPENDED Position */
+#define SCB_SHCSR_USGFAULTPENDED_Msk (1UL << SCB_SHCSR_USGFAULTPENDED_Pos) /*!< SCB SHCSR: USGFAULTPENDED Mask */
+
+#define SCB_SHCSR_SYSTICKACT_Pos 11 /*!< SCB SHCSR: SYSTICKACT Position */
+#define SCB_SHCSR_SYSTICKACT_Msk (1UL << SCB_SHCSR_SYSTICKACT_Pos) /*!< SCB SHCSR: SYSTICKACT Mask */
+
+#define SCB_SHCSR_PENDSVACT_Pos 10 /*!< SCB SHCSR: PENDSVACT Position */
+#define SCB_SHCSR_PENDSVACT_Msk (1UL << SCB_SHCSR_PENDSVACT_Pos) /*!< SCB SHCSR: PENDSVACT Mask */
+
+#define SCB_SHCSR_MONITORACT_Pos 8 /*!< SCB SHCSR: MONITORACT Position */
+#define SCB_SHCSR_MONITORACT_Msk (1UL << SCB_SHCSR_MONITORACT_Pos) /*!< SCB SHCSR: MONITORACT Mask */
+
+#define SCB_SHCSR_SVCALLACT_Pos 7 /*!< SCB SHCSR: SVCALLACT Position */
+#define SCB_SHCSR_SVCALLACT_Msk (1UL << SCB_SHCSR_SVCALLACT_Pos) /*!< SCB SHCSR: SVCALLACT Mask */
+
+#define SCB_SHCSR_USGFAULTACT_Pos 3 /*!< SCB SHCSR: USGFAULTACT Position */
+#define SCB_SHCSR_USGFAULTACT_Msk (1UL << SCB_SHCSR_USGFAULTACT_Pos) /*!< SCB SHCSR: USGFAULTACT Mask */
+
+#define SCB_SHCSR_BUSFAULTACT_Pos 1 /*!< SCB SHCSR: BUSFAULTACT Position */
+#define SCB_SHCSR_BUSFAULTACT_Msk (1UL << SCB_SHCSR_BUSFAULTACT_Pos) /*!< SCB SHCSR: BUSFAULTACT Mask */
+
+#define SCB_SHCSR_MEMFAULTACT_Pos 0 /*!< SCB SHCSR: MEMFAULTACT Position */
+#define SCB_SHCSR_MEMFAULTACT_Msk (1UL << SCB_SHCSR_MEMFAULTACT_Pos) /*!< SCB SHCSR: MEMFAULTACT Mask */
+
+/* SCB Configurable Fault Status Registers Definitions */
+#define SCB_CFSR_USGFAULTSR_Pos 16 /*!< SCB CFSR: Usage Fault Status Register Position */
+#define SCB_CFSR_USGFAULTSR_Msk (0xFFFFUL << SCB_CFSR_USGFAULTSR_Pos) /*!< SCB CFSR: Usage Fault Status Register Mask */
+
+#define SCB_CFSR_BUSFAULTSR_Pos 8 /*!< SCB CFSR: Bus Fault Status Register Position */
+#define SCB_CFSR_BUSFAULTSR_Msk (0xFFUL << SCB_CFSR_BUSFAULTSR_Pos) /*!< SCB CFSR: Bus Fault Status Register Mask */
+
+#define SCB_CFSR_MEMFAULTSR_Pos 0 /*!< SCB CFSR: Memory Manage Fault Status Register Position */
+#define SCB_CFSR_MEMFAULTSR_Msk (0xFFUL << SCB_CFSR_MEMFAULTSR_Pos) /*!< SCB CFSR: Memory Manage Fault Status Register Mask */
+
+/* SCB Hard Fault Status Registers Definitions */
+#define SCB_HFSR_DEBUGEVT_Pos 31 /*!< SCB HFSR: DEBUGEVT Position */
+#define SCB_HFSR_DEBUGEVT_Msk (1UL << SCB_HFSR_DEBUGEVT_Pos) /*!< SCB HFSR: DEBUGEVT Mask */
+
+#define SCB_HFSR_FORCED_Pos 30 /*!< SCB HFSR: FORCED Position */
+#define SCB_HFSR_FORCED_Msk (1UL << SCB_HFSR_FORCED_Pos) /*!< SCB HFSR: FORCED Mask */
+
+#define SCB_HFSR_VECTTBL_Pos 1 /*!< SCB HFSR: VECTTBL Position */
+#define SCB_HFSR_VECTTBL_Msk (1UL << SCB_HFSR_VECTTBL_Pos) /*!< SCB HFSR: VECTTBL Mask */
+
+/* SCB Debug Fault Status Register Definitions */
+#define SCB_DFSR_EXTERNAL_Pos 4 /*!< SCB DFSR: EXTERNAL Position */
+#define SCB_DFSR_EXTERNAL_Msk (1UL << SCB_DFSR_EXTERNAL_Pos) /*!< SCB DFSR: EXTERNAL Mask */
+
+#define SCB_DFSR_VCATCH_Pos 3 /*!< SCB DFSR: VCATCH Position */
+#define SCB_DFSR_VCATCH_Msk (1UL << SCB_DFSR_VCATCH_Pos) /*!< SCB DFSR: VCATCH Mask */
+
+#define SCB_DFSR_DWTTRAP_Pos 2 /*!< SCB DFSR: DWTTRAP Position */
+#define SCB_DFSR_DWTTRAP_Msk (1UL << SCB_DFSR_DWTTRAP_Pos) /*!< SCB DFSR: DWTTRAP Mask */
+
+#define SCB_DFSR_BKPT_Pos 1 /*!< SCB DFSR: BKPT Position */
+#define SCB_DFSR_BKPT_Msk (1UL << SCB_DFSR_BKPT_Pos) /*!< SCB DFSR: BKPT Mask */
+
+#define SCB_DFSR_HALTED_Pos 0 /*!< SCB DFSR: HALTED Position */
+#define SCB_DFSR_HALTED_Msk (1UL << SCB_DFSR_HALTED_Pos) /*!< SCB DFSR: HALTED Mask */
+
+/*@} end of group CMSIS_SCB */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_SCnSCB CMSIS System Control and ID Register not in the SCB
+ Type definitions for the Cortex-M System Control and ID Register not in the SCB
+ @{
+ */
+
+/** \brief Structure type to access the System Control and ID Register not in the SCB.
+ */
+typedef struct
+{
+ uint32_t RESERVED0[1];
+ __I uint32_t ICTR; /*!< Offset: 0x004 (R/ ) Interrupt Controller Type Register */
+#if ((defined __CM3_REV) && (__CM3_REV >= 0x200))
+ __IO uint32_t ACTLR; /*!< Offset: 0x008 (R/W) Auxiliary Control Register */
+#else
+ uint32_t RESERVED1[1];
+#endif
+} SCnSCB_Type;
+
+/* Interrupt Controller Type Register Definitions */
+#define SCnSCB_ICTR_INTLINESNUM_Pos 0 /*!< ICTR: INTLINESNUM Position */
+#define SCnSCB_ICTR_INTLINESNUM_Msk (0xFUL << SCnSCB_ICTR_INTLINESNUM_Pos) /*!< ICTR: INTLINESNUM Mask */
+
+/* Auxiliary Control Register Definitions */
+
+#define SCnSCB_ACTLR_DISFOLD_Pos 2 /*!< ACTLR: DISFOLD Position */
+#define SCnSCB_ACTLR_DISFOLD_Msk (1UL << SCnSCB_ACTLR_DISFOLD_Pos) /*!< ACTLR: DISFOLD Mask */
+
+#define SCnSCB_ACTLR_DISDEFWBUF_Pos 1 /*!< ACTLR: DISDEFWBUF Position */
+#define SCnSCB_ACTLR_DISDEFWBUF_Msk (1UL << SCnSCB_ACTLR_DISDEFWBUF_Pos) /*!< ACTLR: DISDEFWBUF Mask */
+
+#define SCnSCB_ACTLR_DISMCYCINT_Pos 0 /*!< ACTLR: DISMCYCINT Position */
+#define SCnSCB_ACTLR_DISMCYCINT_Msk (1UL << SCnSCB_ACTLR_DISMCYCINT_Pos) /*!< ACTLR: DISMCYCINT Mask */
+
+/*@} end of group CMSIS_SCnotSCB */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_SysTick CMSIS SysTick
+ Type definitions for the Cortex-M System Timer Registers
+ @{
+ */
+
+/** \brief Structure type to access the System Timer (SysTick).
+ */
+typedef struct
+{
+ __IO uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */
+ __IO uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */
+ __IO uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */
+ __I uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */
+} SysTick_Type;
+
+/* SysTick Control / Status Register Definitions */
+#define SysTick_CTRL_COUNTFLAG_Pos 16 /*!< SysTick CTRL: COUNTFLAG Position */
+#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */
+
+#define SysTick_CTRL_CLKSOURCE_Pos 2 /*!< SysTick CTRL: CLKSOURCE Position */
+#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */
+
+#define SysTick_CTRL_TICKINT_Pos 1 /*!< SysTick CTRL: TICKINT Position */
+#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */
+
+#define SysTick_CTRL_ENABLE_Pos 0 /*!< SysTick CTRL: ENABLE Position */
+#define SysTick_CTRL_ENABLE_Msk (1UL << SysTick_CTRL_ENABLE_Pos) /*!< SysTick CTRL: ENABLE Mask */
+
+/* SysTick Reload Register Definitions */
+#define SysTick_LOAD_RELOAD_Pos 0 /*!< SysTick LOAD: RELOAD Position */
+#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL << SysTick_LOAD_RELOAD_Pos) /*!< SysTick LOAD: RELOAD Mask */
+
+/* SysTick Current Register Definitions */
+#define SysTick_VAL_CURRENT_Pos 0 /*!< SysTick VAL: CURRENT Position */
+#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL << SysTick_VAL_CURRENT_Pos) /*!< SysTick VAL: CURRENT Mask */
+
+/* SysTick Calibration Register Definitions */
+#define SysTick_CALIB_NOREF_Pos 31 /*!< SysTick CALIB: NOREF Position */
+#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */
+
+#define SysTick_CALIB_SKEW_Pos 30 /*!< SysTick CALIB: SKEW Position */
+#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */
+
+#define SysTick_CALIB_TENMS_Pos 0 /*!< SysTick CALIB: TENMS Position */
+#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL << SysTick_VAL_CURRENT_Pos) /*!< SysTick CALIB: TENMS Mask */
+
+/*@} end of group CMSIS_SysTick */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_ITM CMSIS ITM
+ Type definitions for the Cortex-M Instrumentation Trace Macrocell (ITM)
+ @{
+ */
+
+/** \brief Structure type to access the Instrumentation Trace Macrocell Register (ITM).
+ */
+typedef struct
+{
+ __O union
+ {
+ __O uint8_t u8; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 8-bit */
+ __O uint16_t u16; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 16-bit */
+ __O uint32_t u32; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 32-bit */
+ } PORT [32]; /*!< Offset: 0x000 ( /W) ITM Stimulus Port Registers */
+ uint32_t RESERVED0[864];
+ __IO uint32_t TER; /*!< Offset: 0xE00 (R/W) ITM Trace Enable Register */
+ uint32_t RESERVED1[15];
+ __IO uint32_t TPR; /*!< Offset: 0xE40 (R/W) ITM Trace Privilege Register */
+ uint32_t RESERVED2[15];
+ __IO uint32_t TCR; /*!< Offset: 0xE80 (R/W) ITM Trace Control Register */
+} ITM_Type;
+
+/* ITM Trace Privilege Register Definitions */
+#define ITM_TPR_PRIVMASK_Pos 0 /*!< ITM TPR: PRIVMASK Position */
+#define ITM_TPR_PRIVMASK_Msk (0xFUL << ITM_TPR_PRIVMASK_Pos) /*!< ITM TPR: PRIVMASK Mask */
+
+/* ITM Trace Control Register Definitions */
+#define ITM_TCR_BUSY_Pos 23 /*!< ITM TCR: BUSY Position */
+#define ITM_TCR_BUSY_Msk (1UL << ITM_TCR_BUSY_Pos) /*!< ITM TCR: BUSY Mask */
+
+#define ITM_TCR_TraceBusID_Pos 16 /*!< ITM TCR: ATBID Position */
+#define ITM_TCR_TraceBusID_Msk (0x7FUL << ITM_TCR_TraceBusID_Pos) /*!< ITM TCR: ATBID Mask */
+
+#define ITM_TCR_GTSFREQ_Pos 10 /*!< ITM TCR: Global timestamp frequency Position */
+#define ITM_TCR_GTSFREQ_Msk (3UL << ITM_TCR_GTSFREQ_Pos) /*!< ITM TCR: Global timestamp frequency Mask */
+
+#define ITM_TCR_TSPrescale_Pos 8 /*!< ITM TCR: TSPrescale Position */
+#define ITM_TCR_TSPrescale_Msk (3UL << ITM_TCR_TSPrescale_Pos) /*!< ITM TCR: TSPrescale Mask */
+
+#define ITM_TCR_SWOENA_Pos 4 /*!< ITM TCR: SWOENA Position */
+#define ITM_TCR_SWOENA_Msk (1UL << ITM_TCR_SWOENA_Pos) /*!< ITM TCR: SWOENA Mask */
+
+#define ITM_TCR_TXENA_Pos 3 /*!< ITM TCR: TXENA Position */
+#define ITM_TCR_TXENA_Msk (1UL << ITM_TCR_TXENA_Pos) /*!< ITM TCR: TXENA Mask */
+
+#define ITM_TCR_SYNCENA_Pos 2 /*!< ITM TCR: SYNCENA Position */
+#define ITM_TCR_SYNCENA_Msk (1UL << ITM_TCR_SYNCENA_Pos) /*!< ITM TCR: SYNCENA Mask */
+
+#define ITM_TCR_TSENA_Pos 1 /*!< ITM TCR: TSENA Position */
+#define ITM_TCR_TSENA_Msk (1UL << ITM_TCR_TSENA_Pos) /*!< ITM TCR: TSENA Mask */
+
+#define ITM_TCR_ITMENA_Pos 0 /*!< ITM TCR: ITM Enable bit Position */
+#define ITM_TCR_ITMENA_Msk (1UL << ITM_TCR_ITMENA_Pos) /*!< ITM TCR: ITM Enable bit Mask */
+
+/*@}*/ /* end of group CMSIS_ITM */
+
+
+#if (__MPU_PRESENT == 1)
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_MPU CMSIS MPU
+ Type definitions for the Cortex-M Memory Protection Unit (MPU)
+ @{
+ */
+
+/** \brief Structure type to access the Memory Protection Unit (MPU).
+ */
+typedef struct
+{
+ __I uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */
+ __IO uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */
+ __IO uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region RNRber Register */
+ __IO uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */
+ __IO uint32_t RASR; /*!< Offset: 0x010 (R/W) MPU Region Attribute and Size Register */
+ __IO uint32_t RBAR_A1; /*!< Offset: 0x014 (R/W) MPU Alias 1 Region Base Address Register */
+ __IO uint32_t RASR_A1; /*!< Offset: 0x018 (R/W) MPU Alias 1 Region Attribute and Size Register */
+ __IO uint32_t RBAR_A2; /*!< Offset: 0x01C (R/W) MPU Alias 2 Region Base Address Register */
+ __IO uint32_t RASR_A2; /*!< Offset: 0x020 (R/W) MPU Alias 2 Region Attribute and Size Register */
+ __IO uint32_t RBAR_A3; /*!< Offset: 0x024 (R/W) MPU Alias 3 Region Base Address Register */
+ __IO uint32_t RASR_A3; /*!< Offset: 0x028 (R/W) MPU Alias 3 Region Attribute and Size Register */
+} MPU_Type;
+
+/* MPU Type Register */
+#define MPU_TYPE_IREGION_Pos 16 /*!< MPU TYPE: IREGION Position */
+#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */
+
+#define MPU_TYPE_DREGION_Pos 8 /*!< MPU TYPE: DREGION Position */
+#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */
+
+#define MPU_TYPE_SEPARATE_Pos 0 /*!< MPU TYPE: SEPARATE Position */
+#define MPU_TYPE_SEPARATE_Msk (1UL << MPU_TYPE_SEPARATE_Pos) /*!< MPU TYPE: SEPARATE Mask */
+
+/* MPU Control Register */
+#define MPU_CTRL_PRIVDEFENA_Pos 2 /*!< MPU CTRL: PRIVDEFENA Position */
+#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */
+
+#define MPU_CTRL_HFNMIENA_Pos 1 /*!< MPU CTRL: HFNMIENA Position */
+#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */
+
+#define MPU_CTRL_ENABLE_Pos 0 /*!< MPU CTRL: ENABLE Position */
+#define MPU_CTRL_ENABLE_Msk (1UL << MPU_CTRL_ENABLE_Pos) /*!< MPU CTRL: ENABLE Mask */
+
+/* MPU Region Number Register */
+#define MPU_RNR_REGION_Pos 0 /*!< MPU RNR: REGION Position */
+#define MPU_RNR_REGION_Msk (0xFFUL << MPU_RNR_REGION_Pos) /*!< MPU RNR: REGION Mask */
+
+/* MPU Region Base Address Register */
+#define MPU_RBAR_ADDR_Pos 5 /*!< MPU RBAR: ADDR Position */
+#define MPU_RBAR_ADDR_Msk (0x7FFFFFFUL << MPU_RBAR_ADDR_Pos) /*!< MPU RBAR: ADDR Mask */
+
+#define MPU_RBAR_VALID_Pos 4 /*!< MPU RBAR: VALID Position */
+#define MPU_RBAR_VALID_Msk (1UL << MPU_RBAR_VALID_Pos) /*!< MPU RBAR: VALID Mask */
+
+#define MPU_RBAR_REGION_Pos 0 /*!< MPU RBAR: REGION Position */
+#define MPU_RBAR_REGION_Msk (0xFUL << MPU_RBAR_REGION_Pos) /*!< MPU RBAR: REGION Mask */
+
+/* MPU Region Attribute and Size Register */
+#define MPU_RASR_ATTRS_Pos 16 /*!< MPU RASR: MPU Region Attribute field Position */
+#define MPU_RASR_ATTRS_Msk (0xFFFFUL << MPU_RASR_ATTRS_Pos) /*!< MPU RASR: MPU Region Attribute field Mask */
+
+#define MPU_RASR_SRD_Pos 8 /*!< MPU RASR: Sub-Region Disable Position */
+#define MPU_RASR_SRD_Msk (0xFFUL << MPU_RASR_SRD_Pos) /*!< MPU RASR: Sub-Region Disable Mask */
+
+#define MPU_RASR_SIZE_Pos 1 /*!< MPU RASR: Region Size Field Position */
+#define MPU_RASR_SIZE_Msk (0x1FUL << MPU_RASR_SIZE_Pos) /*!< MPU RASR: Region Size Field Mask */
+
+#define MPU_RASR_ENABLE_Pos 0 /*!< MPU RASR: Region enable bit Position */
+#define MPU_RASR_ENABLE_Msk (1UL << MPU_RASR_ENABLE_Pos) /*!< MPU RASR: Region enable bit Disable Mask */
+
+/*@} end of group CMSIS_MPU */
+#endif
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_CoreDebug CMSIS Core Debug
+ Type definitions for the Cortex-M Core Debug Registers
+ @{
+ */
+
+/** \brief Structure type to access the Core Debug Register (CoreDebug).
+ */
+typedef struct
+{
+ __IO uint32_t DHCSR; /*!< Offset: 0x000 (R/W) Debug Halting Control and Status Register */
+ __O uint32_t DCRSR; /*!< Offset: 0x004 ( /W) Debug Core Register Selector Register */
+ __IO uint32_t DCRDR; /*!< Offset: 0x008 (R/W) Debug Core Register Data Register */
+ __IO uint32_t DEMCR; /*!< Offset: 0x00C (R/W) Debug Exception and Monitor Control Register */
+} CoreDebug_Type;
+
+/* Debug Halting Control and Status Register */
+#define CoreDebug_DHCSR_DBGKEY_Pos 16 /*!< CoreDebug DHCSR: DBGKEY Position */
+#define CoreDebug_DHCSR_DBGKEY_Msk (0xFFFFUL << CoreDebug_DHCSR_DBGKEY_Pos) /*!< CoreDebug DHCSR: DBGKEY Mask */
+
+#define CoreDebug_DHCSR_S_RESET_ST_Pos 25 /*!< CoreDebug DHCSR: S_RESET_ST Position */
+#define CoreDebug_DHCSR_S_RESET_ST_Msk (1UL << CoreDebug_DHCSR_S_RESET_ST_Pos) /*!< CoreDebug DHCSR: S_RESET_ST Mask */
+
+#define CoreDebug_DHCSR_S_RETIRE_ST_Pos 24 /*!< CoreDebug DHCSR: S_RETIRE_ST Position */
+#define CoreDebug_DHCSR_S_RETIRE_ST_Msk (1UL << CoreDebug_DHCSR_S_RETIRE_ST_Pos) /*!< CoreDebug DHCSR: S_RETIRE_ST Mask */
+
+#define CoreDebug_DHCSR_S_LOCKUP_Pos 19 /*!< CoreDebug DHCSR: S_LOCKUP Position */
+#define CoreDebug_DHCSR_S_LOCKUP_Msk (1UL << CoreDebug_DHCSR_S_LOCKUP_Pos) /*!< CoreDebug DHCSR: S_LOCKUP Mask */
+
+#define CoreDebug_DHCSR_S_SLEEP_Pos 18 /*!< CoreDebug DHCSR: S_SLEEP Position */
+#define CoreDebug_DHCSR_S_SLEEP_Msk (1UL << CoreDebug_DHCSR_S_SLEEP_Pos) /*!< CoreDebug DHCSR: S_SLEEP Mask */
+
+#define CoreDebug_DHCSR_S_HALT_Pos 17 /*!< CoreDebug DHCSR: S_HALT Position */
+#define CoreDebug_DHCSR_S_HALT_Msk (1UL << CoreDebug_DHCSR_S_HALT_Pos) /*!< CoreDebug DHCSR: S_HALT Mask */
+
+#define CoreDebug_DHCSR_S_REGRDY_Pos 16 /*!< CoreDebug DHCSR: S_REGRDY Position */
+#define CoreDebug_DHCSR_S_REGRDY_Msk (1UL << CoreDebug_DHCSR_S_REGRDY_Pos) /*!< CoreDebug DHCSR: S_REGRDY Mask */
+
+#define CoreDebug_DHCSR_C_SNAPSTALL_Pos 5 /*!< CoreDebug DHCSR: C_SNAPSTALL Position */
+#define CoreDebug_DHCSR_C_SNAPSTALL_Msk (1UL << CoreDebug_DHCSR_C_SNAPSTALL_Pos) /*!< CoreDebug DHCSR: C_SNAPSTALL Mask */
+
+#define CoreDebug_DHCSR_C_MASKINTS_Pos 3 /*!< CoreDebug DHCSR: C_MASKINTS Position */
+#define CoreDebug_DHCSR_C_MASKINTS_Msk (1UL << CoreDebug_DHCSR_C_MASKINTS_Pos) /*!< CoreDebug DHCSR: C_MASKINTS Mask */
+
+#define CoreDebug_DHCSR_C_STEP_Pos 2 /*!< CoreDebug DHCSR: C_STEP Position */
+#define CoreDebug_DHCSR_C_STEP_Msk (1UL << CoreDebug_DHCSR_C_STEP_Pos) /*!< CoreDebug DHCSR: C_STEP Mask */
+
+#define CoreDebug_DHCSR_C_HALT_Pos 1 /*!< CoreDebug DHCSR: C_HALT Position */
+#define CoreDebug_DHCSR_C_HALT_Msk (1UL << CoreDebug_DHCSR_C_HALT_Pos) /*!< CoreDebug DHCSR: C_HALT Mask */
+
+#define CoreDebug_DHCSR_C_DEBUGEN_Pos 0 /*!< CoreDebug DHCSR: C_DEBUGEN Position */
+#define CoreDebug_DHCSR_C_DEBUGEN_Msk (1UL << CoreDebug_DHCSR_C_DEBUGEN_Pos) /*!< CoreDebug DHCSR: C_DEBUGEN Mask */
+
+/* Debug Core Register Selector Register */
+#define CoreDebug_DCRSR_REGWnR_Pos 16 /*!< CoreDebug DCRSR: REGWnR Position */
+#define CoreDebug_DCRSR_REGWnR_Msk (1UL << CoreDebug_DCRSR_REGWnR_Pos) /*!< CoreDebug DCRSR: REGWnR Mask */
+
+#define CoreDebug_DCRSR_REGSEL_Pos 0 /*!< CoreDebug DCRSR: REGSEL Position */
+#define CoreDebug_DCRSR_REGSEL_Msk (0x1FUL << CoreDebug_DCRSR_REGSEL_Pos) /*!< CoreDebug DCRSR: REGSEL Mask */
+
+/* Debug Exception and Monitor Control Register */
+#define CoreDebug_DEMCR_TRCENA_Pos 24 /*!< CoreDebug DEMCR: TRCENA Position */
+#define CoreDebug_DEMCR_TRCENA_Msk (1UL << CoreDebug_DEMCR_TRCENA_Pos) /*!< CoreDebug DEMCR: TRCENA Mask */
+
+#define CoreDebug_DEMCR_MON_REQ_Pos 19 /*!< CoreDebug DEMCR: MON_REQ Position */
+#define CoreDebug_DEMCR_MON_REQ_Msk (1UL << CoreDebug_DEMCR_MON_REQ_Pos) /*!< CoreDebug DEMCR: MON_REQ Mask */
+
+#define CoreDebug_DEMCR_MON_STEP_Pos 18 /*!< CoreDebug DEMCR: MON_STEP Position */
+#define CoreDebug_DEMCR_MON_STEP_Msk (1UL << CoreDebug_DEMCR_MON_STEP_Pos) /*!< CoreDebug DEMCR: MON_STEP Mask */
+
+#define CoreDebug_DEMCR_MON_PEND_Pos 17 /*!< CoreDebug DEMCR: MON_PEND Position */
+#define CoreDebug_DEMCR_MON_PEND_Msk (1UL << CoreDebug_DEMCR_MON_PEND_Pos) /*!< CoreDebug DEMCR: MON_PEND Mask */
+
+#define CoreDebug_DEMCR_MON_EN_Pos 16 /*!< CoreDebug DEMCR: MON_EN Position */
+#define CoreDebug_DEMCR_MON_EN_Msk (1UL << CoreDebug_DEMCR_MON_EN_Pos) /*!< CoreDebug DEMCR: MON_EN Mask */
+
+#define CoreDebug_DEMCR_VC_HARDERR_Pos 10 /*!< CoreDebug DEMCR: VC_HARDERR Position */
+#define CoreDebug_DEMCR_VC_HARDERR_Msk (1UL << CoreDebug_DEMCR_VC_HARDERR_Pos) /*!< CoreDebug DEMCR: VC_HARDERR Mask */
+
+#define CoreDebug_DEMCR_VC_INTERR_Pos 9 /*!< CoreDebug DEMCR: VC_INTERR Position */
+#define CoreDebug_DEMCR_VC_INTERR_Msk (1UL << CoreDebug_DEMCR_VC_INTERR_Pos) /*!< CoreDebug DEMCR: VC_INTERR Mask */
+
+#define CoreDebug_DEMCR_VC_BUSERR_Pos 8 /*!< CoreDebug DEMCR: VC_BUSERR Position */
+#define CoreDebug_DEMCR_VC_BUSERR_Msk (1UL << CoreDebug_DEMCR_VC_BUSERR_Pos) /*!< CoreDebug DEMCR: VC_BUSERR Mask */
+
+#define CoreDebug_DEMCR_VC_STATERR_Pos 7 /*!< CoreDebug DEMCR: VC_STATERR Position */
+#define CoreDebug_DEMCR_VC_STATERR_Msk (1UL << CoreDebug_DEMCR_VC_STATERR_Pos) /*!< CoreDebug DEMCR: VC_STATERR Mask */
+
+#define CoreDebug_DEMCR_VC_CHKERR_Pos 6 /*!< CoreDebug DEMCR: VC_CHKERR Position */
+#define CoreDebug_DEMCR_VC_CHKERR_Msk (1UL << CoreDebug_DEMCR_VC_CHKERR_Pos) /*!< CoreDebug DEMCR: VC_CHKERR Mask */
+
+#define CoreDebug_DEMCR_VC_NOCPERR_Pos 5 /*!< CoreDebug DEMCR: VC_NOCPERR Position */
+#define CoreDebug_DEMCR_VC_NOCPERR_Msk (1UL << CoreDebug_DEMCR_VC_NOCPERR_Pos) /*!< CoreDebug DEMCR: VC_NOCPERR Mask */
+
+#define CoreDebug_DEMCR_VC_MMERR_Pos 4 /*!< CoreDebug DEMCR: VC_MMERR Position */
+#define CoreDebug_DEMCR_VC_MMERR_Msk (1UL << CoreDebug_DEMCR_VC_MMERR_Pos) /*!< CoreDebug DEMCR: VC_MMERR Mask */
+
+#define CoreDebug_DEMCR_VC_CORERESET_Pos 0 /*!< CoreDebug DEMCR: VC_CORERESET Position */
+#define CoreDebug_DEMCR_VC_CORERESET_Msk (1UL << CoreDebug_DEMCR_VC_CORERESET_Pos) /*!< CoreDebug DEMCR: VC_CORERESET Mask */
+
+/*@} end of group CMSIS_CoreDebug */
+
+
+/** \ingroup CMSIS_core_register
+ @{
+ */
+
+/* Memory mapping of Cortex-M3 Hardware */
+#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */
+#define ITM_BASE (0xE0000000UL) /*!< ITM Base Address */
+#define CoreDebug_BASE (0xE000EDF0UL) /*!< Core Debug Base Address */
+#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */
+#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */
+#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */
+
+#define SCnSCB ((SCnSCB_Type *) SCS_BASE ) /*!< System control Register not in SCB */
+#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */
+#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */
+#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */
+#define ITM ((ITM_Type *) ITM_BASE ) /*!< ITM configuration struct */
+#define CoreDebug ((CoreDebug_Type *) CoreDebug_BASE) /*!< Core Debug configuration struct */
+
+#if (__MPU_PRESENT == 1)
+ #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */
+ #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */
+#endif
+
+/*@} */
+
+
+
+/*******************************************************************************
+ * Hardware Abstraction Layer
+ ******************************************************************************/
+/** \defgroup CMSIS_Core_FunctionInterface CMSIS Core Function Interface
+ Core Function Interface contains:
+ - Core NVIC Functions
+ - Core SysTick Functions
+ - Core Debug Functions
+ - Core Register Access Functions
+*/
+
+
+
+/* ########################## NVIC functions #################################### */
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_NVICFunctions CMSIS Core NVIC Functions
+ @{
+ */
+
+/** \brief Set Priority Grouping
+
+ This function sets the priority grouping field using the required unlock sequence.
+ The parameter PriorityGroup is assigned to the field SCB->AIRCR [10:8] PRIGROUP field.
+ Only values from 0..7 are used.
+ In case of a conflict between priority grouping and available
+ priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set.
+
+ \param [in] PriorityGroup Priority grouping field
+ */
+static __INLINE void NVIC_SetPriorityGrouping(uint32_t PriorityGroup)
+{
+ uint32_t reg_value;
+ uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07); /* only values 0..7 are used */
+
+ reg_value = SCB->AIRCR; /* read old register configuration */
+ reg_value &= ~(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk); /* clear bits to change */
+ reg_value = (reg_value |
+ ((uint32_t)0x5FA << SCB_AIRCR_VECTKEY_Pos) |
+ (PriorityGroupTmp << 8)); /* Insert write key and priorty group */
+ SCB->AIRCR = reg_value;
+}
+
+
+/** \brief Get Priority Grouping
+
+ This function gets the priority grouping from NVIC Interrupt Controller.
+ Priority grouping is SCB->AIRCR [10:8] PRIGROUP field.
+
+ \return Priority grouping field
+ */
+static __INLINE uint32_t NVIC_GetPriorityGrouping(void)
+{
+ return ((SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos); /* read priority grouping field */
+}
+
+
+/** \brief Enable External Interrupt
+
+ This function enables a device specific interrupt in the NVIC interrupt controller.
+ The interrupt number cannot be a negative value.
+
+ \param [in] IRQn Number of the external interrupt to enable
+ */
+static __INLINE void NVIC_EnableIRQ(IRQn_Type IRQn)
+{
+ NVIC->ISER[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* enable interrupt */
+}
+
+
+/** \brief Disable External Interrupt
+
+ This function disables a device specific interrupt in the NVIC interrupt controller.
+ The interrupt number cannot be a negative value.
+
+ \param [in] IRQn Number of the external interrupt to disable
+ */
+static __INLINE void NVIC_DisableIRQ(IRQn_Type IRQn)
+{
+ NVIC->ICER[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* disable interrupt */
+}
+
+
+/** \brief Get Pending Interrupt
+
+ This function reads the pending register in the NVIC and returns the pending bit
+ for the specified interrupt.
+
+ \param [in] IRQn Number of the interrupt for get pending
+ \return 0 Interrupt status is not pending
+ \return 1 Interrupt status is pending
+ */
+static __INLINE uint32_t NVIC_GetPendingIRQ(IRQn_Type IRQn)
+{
+ return((uint32_t) ((NVIC->ISPR[(uint32_t)(IRQn) >> 5] & (1 << ((uint32_t)(IRQn) & 0x1F)))?1:0)); /* Return 1 if pending else 0 */
+}
+
+
+/** \brief Set Pending Interrupt
+
+ This function sets the pending bit for the specified interrupt.
+ The interrupt number cannot be a negative value.
+
+ \param [in] IRQn Number of the interrupt for set pending
+ */
+static __INLINE void NVIC_SetPendingIRQ(IRQn_Type IRQn)
+{
+ NVIC->ISPR[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* set interrupt pending */
+}
+
+
+/** \brief Clear Pending Interrupt
+
+ This function clears the pending bit for the specified interrupt.
+ The interrupt number cannot be a negative value.
+
+ \param [in] IRQn Number of the interrupt for clear pending
+ */
+static __INLINE void NVIC_ClearPendingIRQ(IRQn_Type IRQn)
+{
+ NVIC->ICPR[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* Clear pending interrupt */
+}
+
+
+/** \brief Get Active Interrupt
+
+ This function reads the active register in NVIC and returns the active bit.
+ \param [in] IRQn Number of the interrupt for get active
+ \return 0 Interrupt status is not active
+ \return 1 Interrupt status is active
+ */
+static __INLINE uint32_t NVIC_GetActive(IRQn_Type IRQn)
+{
+ return((uint32_t)((NVIC->IABR[(uint32_t)(IRQn) >> 5] & (1 << ((uint32_t)(IRQn) & 0x1F)))?1:0)); /* Return 1 if active else 0 */
+}
+
+
+/** \brief Set Interrupt Priority
+
+ This function sets the priority for the specified interrupt. The interrupt
+ number can be positive to specify an external (device specific)
+ interrupt, or negative to specify an internal (core) interrupt.
+
+ Note: The priority cannot be set for every core interrupt.
+
+ \param [in] IRQn Number of the interrupt for set priority
+ \param [in] priority Priority to set
+ */
+static __INLINE void NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority)
+{
+ if(IRQn < 0) {
+ SCB->SHP[((uint32_t)(IRQn) & 0xF)-4] = ((priority << (8 - __NVIC_PRIO_BITS)) & 0xff); } /* set Priority for Cortex-M System Interrupts */
+ else {
+ NVIC->IP[(uint32_t)(IRQn)] = ((priority << (8 - __NVIC_PRIO_BITS)) & 0xff); } /* set Priority for device specific Interrupts */
+}
+
+
+/** \brief Get Interrupt Priority
+
+ This function reads the priority for the specified interrupt. The interrupt
+ number can be positive to specify an external (device specific)
+ interrupt, or negative to specify an internal (core) interrupt.
+
+ The returned priority value is automatically aligned to the implemented
+ priority bits of the microcontroller.
+
+ \param [in] IRQn Number of the interrupt for get priority
+ \return Interrupt Priority
+ */
+static __INLINE uint32_t NVIC_GetPriority(IRQn_Type IRQn)
+{
+
+ if(IRQn < 0) {
+ return((uint32_t)(SCB->SHP[((uint32_t)(IRQn) & 0xF)-4] >> (8 - __NVIC_PRIO_BITS))); } /* get priority for Cortex-M system interrupts */
+ else {
+ return((uint32_t)(NVIC->IP[(uint32_t)(IRQn)] >> (8 - __NVIC_PRIO_BITS))); } /* get priority for device specific interrupts */
+}
+
+
+/** \brief Encode Priority
+
+ This function encodes the priority for an interrupt with the given priority group,
+ preemptive priority value and sub priority value.
+ In case of a conflict between priority grouping and available
+ priority bits (__NVIC_PRIO_BITS) the samllest possible priority group is set.
+
+ The returned priority value can be used for NVIC_SetPriority(...) function
+
+ \param [in] PriorityGroup Used priority group
+ \param [in] PreemptPriority Preemptive priority value (starting from 0)
+ \param [in] SubPriority Sub priority value (starting from 0)
+ \return Encoded priority for the interrupt
+ */
+static __INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority)
+{
+ uint32_t PriorityGroupTmp = (PriorityGroup & 0x07); /* only values 0..7 are used */
+ uint32_t PreemptPriorityBits;
+ uint32_t SubPriorityBits;
+
+ PreemptPriorityBits = ((7 - PriorityGroupTmp) > __NVIC_PRIO_BITS) ? __NVIC_PRIO_BITS : 7 - PriorityGroupTmp;
+ SubPriorityBits = ((PriorityGroupTmp + __NVIC_PRIO_BITS) < 7) ? 0 : PriorityGroupTmp - 7 + __NVIC_PRIO_BITS;
+
+ return (
+ ((PreemptPriority & ((1 << (PreemptPriorityBits)) - 1)) << SubPriorityBits) |
+ ((SubPriority & ((1 << (SubPriorityBits )) - 1)))
+ );
+}
+
+
+/** \brief Decode Priority
+
+ This function decodes an interrupt priority value with the given priority group to
+ preemptive priority value and sub priority value.
+ In case of a conflict between priority grouping and available
+ priority bits (__NVIC_PRIO_BITS) the samllest possible priority group is set.
+
+ The priority value can be retrieved with NVIC_GetPriority(...) function
+
+ \param [in] Priority Priority value
+ \param [in] PriorityGroup Used priority group
+ \param [out] pPreemptPriority Preemptive priority value (starting from 0)
+ \param [out] pSubPriority Sub priority value (starting from 0)
+ */
+static __INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* pPreemptPriority, uint32_t* pSubPriority)
+{
+ uint32_t PriorityGroupTmp = (PriorityGroup & 0x07); /* only values 0..7 are used */
+ uint32_t PreemptPriorityBits;
+ uint32_t SubPriorityBits;
+
+ PreemptPriorityBits = ((7 - PriorityGroupTmp) > __NVIC_PRIO_BITS) ? __NVIC_PRIO_BITS : 7 - PriorityGroupTmp;
+ SubPriorityBits = ((PriorityGroupTmp + __NVIC_PRIO_BITS) < 7) ? 0 : PriorityGroupTmp - 7 + __NVIC_PRIO_BITS;
+
+ *pPreemptPriority = (Priority >> SubPriorityBits) & ((1 << (PreemptPriorityBits)) - 1);
+ *pSubPriority = (Priority ) & ((1 << (SubPriorityBits )) - 1);
+}
+
+
+/** \brief System Reset
+
+ This function initiate a system reset request to reset the MCU.
+ */
+static __INLINE void NVIC_SystemReset(void)
+{
+ __DSB(); /* Ensure all outstanding memory accesses included
+ buffered write are completed before reset */
+ SCB->AIRCR = ((0x5FA << SCB_AIRCR_VECTKEY_Pos) |
+ (SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) |
+ SCB_AIRCR_SYSRESETREQ_Msk); /* Keep priority group unchanged */
+ __DSB(); /* Ensure completion of memory access */
+ while(1); /* wait until reset */
+}
+
+/*@} end of CMSIS_Core_NVICFunctions */
+
+
+
+/* ################################## SysTick function ############################################ */
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_SysTickFunctions CMSIS Core SysTick Functions
+ @{
+ */
+
+#if (__Vendor_SysTickConfig == 0)
+
+/** \brief System Tick Configuration
+
+ This function initialises the system tick timer and its interrupt and start the system tick timer.
+ Counter is in free running mode to generate periodical interrupts.
+
+ \param [in] ticks Number of ticks between two interrupts
+ \return 0 Function succeeded
+ \return 1 Function failed
+ */
+static __INLINE uint32_t SysTick_Config(uint32_t ticks)
+{
+ if (ticks > SysTick_LOAD_RELOAD_Msk) return (1); /* Reload value impossible */
+
+ SysTick->LOAD = (ticks & SysTick_LOAD_RELOAD_Msk) - 1; /* set reload register */
+ NVIC_SetPriority (SysTick_IRQn, (1<<__NVIC_PRIO_BITS) - 1); /* set Priority for Cortex-M0 System Interrupts */
+ SysTick->VAL = 0; /* Load the SysTick Counter Value */
+ SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk |
+ SysTick_CTRL_TICKINT_Msk |
+ SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */
+ return (0); /* Function successful */
+}
+
+#endif
+
+/*@} end of CMSIS_Core_SysTickFunctions */
+
+
+
+/* ##################################### Debug In/Output function ########################################### */
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_core_DebugFunctions CMSIS Core Debug Functions
+ @{
+ */
+
+extern volatile int32_t ITM_RxBuffer; /*!< external variable to receive characters */
+#define ITM_RXBUFFER_EMPTY 0x5AA55AA5 /*!< value identifying ITM_RxBuffer is ready for next character */
+
+
+/** \brief ITM Send Character
+
+ This function transmits a character via the ITM channel 0.
+ It just returns when no debugger is connected that has booked the output.
+ It is blocking when a debugger is connected, but the previous character send is not transmitted.
+
+ \param [in] ch Character to transmit
+ \return Character to transmit
+ */
+static __INLINE uint32_t ITM_SendChar (uint32_t ch)
+{
+ if ((CoreDebug->DEMCR & CoreDebug_DEMCR_TRCENA_Msk) && /* Trace enabled */
+ (ITM->TCR & ITM_TCR_ITMENA_Msk) && /* ITM enabled */
+ (ITM->TER & (1UL << 0) ) ) /* ITM Port #0 enabled */
+ {
+ while (ITM->PORT[0].u32 == 0);
+ ITM->PORT[0].u8 = (uint8_t) ch;
+ }
+ return (ch);
+}
+
+
+/** \brief ITM Receive Character
+
+ This function inputs a character via external variable ITM_RxBuffer.
+ It just returns when no debugger is connected that has booked the output.
+ It is blocking when a debugger is connected, but the previous character send is not transmitted.
+
+ \return Received character
+ \return -1 No character received
+ */
+static __INLINE int32_t ITM_ReceiveChar (void) {
+ int32_t ch = -1; /* no character available */
+
+ if (ITM_RxBuffer != ITM_RXBUFFER_EMPTY) {
+ ch = ITM_RxBuffer;
+ ITM_RxBuffer = ITM_RXBUFFER_EMPTY; /* ready for next character */
+ }
+
+ return (ch);
+}
+
+
+/** \brief ITM Check Character
+
+ This function checks external variable ITM_RxBuffer whether a character is available or not.
+ It returns '1' if a character is available and '0' if no character is available.
+
+ \return 0 No character available
+ \return 1 Character available
+ */
+static __INLINE int32_t ITM_CheckChar (void) {
+
+ if (ITM_RxBuffer == ITM_RXBUFFER_EMPTY) {
+ return (0); /* no character available */
+ } else {
+ return (1); /* character available */
+ }
+}
+
+/*@} end of CMSIS_core_DebugFunctions */
+
+#endif /* __CORE_CM3_H_DEPENDANT */
+
+#endif /* __CMSIS_GENERIC */
+
+#ifdef __cplusplus
+}
+#endif
diff --git a/os/ports/common/ARMCMx/CMSIS/include/core_cm4.h b/os/ports/common/ARMCMx/CMSIS/include/core_cm4.h new file mode 100644 index 000000000..76bf8292a --- /dev/null +++ b/os/ports/common/ARMCMx/CMSIS/include/core_cm4.h @@ -0,0 +1,1378 @@ +/**************************************************************************//**
+ * @file core_cm4.h
+ * @brief CMSIS Cortex-M4 Core Peripheral Access Layer Header File
+ * @version V2.10
+ * @date 19. July 2011
+ *
+ * @note
+ * Copyright (C) 2009-2011 ARM Limited. All rights reserved.
+ *
+ * @par
+ * ARM Limited (ARM) is supplying this software for use with Cortex-M
+ * processor based microcontrollers. This file can be freely distributed
+ * within development tools that are supporting such ARM based processors.
+ *
+ * @par
+ * THIS SOFTWARE IS PROVIDED "AS IS". NO WARRANTIES, WHETHER EXPRESS, IMPLIED
+ * OR STATUTORY, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE.
+ * ARM SHALL NOT, IN ANY CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR
+ * CONSEQUENTIAL DAMAGES, FOR ANY REASON WHATSOEVER.
+ *
+ ******************************************************************************/
+#if defined ( __ICCARM__ )
+ #pragma system_include /* treat file as system include file for MISRA check */
+#endif
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#ifndef __CORE_CM4_H_GENERIC
+#define __CORE_CM4_H_GENERIC
+
+
+/** \mainpage CMSIS Cortex-M4
+
+ This documentation describes the CMSIS Cortex-M Core Peripheral Access Layer.
+ It consists of:
+
+ - Cortex-M Core Register Definitions
+ - Cortex-M functions
+ - Cortex-M instructions
+ - Cortex-M SIMD instructions
+
+ The CMSIS Cortex-M4 Core Peripheral Access Layer contains C and assembly functions that ease
+ access to the Cortex-M Core
+ */
+
+/** \defgroup CMSIS_MISRA_Exceptions CMSIS MISRA-C:2004 Compliance Exceptions
+ CMSIS violates following MISRA-C2004 Rules:
+
+ - Violates MISRA 2004 Required Rule 8.5, object/function definition in header file.<br>
+ Function definitions in header files are used to allow 'inlining'.
+
+ - Violates MISRA 2004 Required Rule 18.4, declaration of union type or object of union type: '{...}'.<br>
+ Unions are used for effective representation of core registers.
+
+ - Violates MISRA 2004 Advisory Rule 19.7, Function-like macro defined.<br>
+ Function-like macros are used to allow more efficient code.
+
+ */
+
+
+/*******************************************************************************
+ * CMSIS definitions
+ ******************************************************************************/
+/** \defgroup CMSIS_core_definitions CMSIS Core Definitions
+ This file defines all structures and symbols for CMSIS core:
+ - CMSIS version number
+ - Cortex-M core
+ - Cortex-M core Revision Number
+ @{
+ */
+
+/* CMSIS CM4 definitions */
+#define __CM4_CMSIS_VERSION_MAIN (0x02) /*!< [31:16] CMSIS HAL main version */
+#define __CM4_CMSIS_VERSION_SUB (0x10) /*!< [15:0] CMSIS HAL sub version */
+#define __CM4_CMSIS_VERSION ((__CM4_CMSIS_VERSION_MAIN << 16) | __CM4_CMSIS_VERSION_SUB) /*!< CMSIS HAL version number */
+
+#define __CORTEX_M (0x04) /*!< Cortex core */
+
+
+#if defined ( __CC_ARM )
+ #define __ASM __asm /*!< asm keyword for ARM Compiler */
+ #define __INLINE __inline /*!< inline keyword for ARM Compiler */
+
+#elif defined ( __ICCARM__ )
+ #define __ASM __asm /*!< asm keyword for IAR Compiler */
+ #define __INLINE inline /*!< inline keyword for IAR Compiler. Only available in High optimization mode! */
+
+#elif defined ( __GNUC__ )
+ #define __ASM __asm /*!< asm keyword for GNU Compiler */
+ #define __INLINE inline /*!< inline keyword for GNU Compiler */
+
+#elif defined ( __TASKING__ )
+ #define __ASM __asm /*!< asm keyword for TASKING Compiler */
+ #define __INLINE inline /*!< inline keyword for TASKING Compiler */
+
+#endif
+
+/*!< __FPU_USED to be checked prior to making use of FPU specific registers and functions */
+#if defined ( __CC_ARM )
+ #if defined __TARGET_FPU_VFP
+ #if (__FPU_PRESENT == 1)
+ #define __FPU_USED 1
+ #else
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #define __FPU_USED 0
+ #endif
+ #else
+ #define __FPU_USED 0
+ #endif
+
+#elif defined ( __ICCARM__ )
+ #if defined __ARMVFP__
+ #if (__FPU_PRESENT == 1)
+ #define __FPU_USED 1
+ #else
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #define __FPU_USED 0
+ #endif
+ #else
+ #define __FPU_USED 0
+ #endif
+
+#elif defined ( __GNUC__ )
+ #if defined (__VFP_FP__) && !defined(__SOFTFP__)
+ #if (__FPU_PRESENT == 1)
+ #define __FPU_USED 1
+ #else
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #define __FPU_USED 0
+ #endif
+ #else
+ #define __FPU_USED 0
+ #endif
+
+#elif defined ( __TASKING__ )
+ /* add preprocessor checks to define __FPU_USED */
+ #define __FPU_USED 0
+#endif
+
+#include <stdint.h> /*!< standard types definitions */
+#include <core_cmInstr.h> /*!< Core Instruction Access */
+#include <core_cmFunc.h> /*!< Core Function Access */
+#include <core_cm4_simd.h> /*!< Compiler specific SIMD Intrinsics */
+
+#endif /* __CORE_CM4_H_GENERIC */
+
+#ifndef __CMSIS_GENERIC
+
+#ifndef __CORE_CM4_H_DEPENDANT
+#define __CORE_CM4_H_DEPENDANT
+
+/* check device defines and use defaults */
+#if defined __CHECK_DEVICE_DEFINES
+ #ifndef __CM4_REV
+ #define __CM4_REV 0x0000
+ #warning "__CM4_REV not defined in device header file; using default!"
+ #endif
+
+ #ifndef __FPU_PRESENT
+ #define __FPU_PRESENT 0
+ #warning "__FPU_PRESENT not defined in device header file; using default!"
+ #endif
+
+ #ifndef __MPU_PRESENT
+ #define __MPU_PRESENT 0
+ #warning "__MPU_PRESENT not defined in device header file; using default!"
+ #endif
+
+ #ifndef __NVIC_PRIO_BITS
+ #define __NVIC_PRIO_BITS 4
+ #warning "__NVIC_PRIO_BITS not defined in device header file; using default!"
+ #endif
+
+ #ifndef __Vendor_SysTickConfig
+ #define __Vendor_SysTickConfig 0
+ #warning "__Vendor_SysTickConfig not defined in device header file; using default!"
+ #endif
+#endif
+
+/* IO definitions (access restrictions to peripheral registers) */
+#ifdef __cplusplus
+ #define __I volatile /*!< defines 'read only' permissions */
+#else
+ #define __I volatile const /*!< defines 'read only' permissions */
+#endif
+#define __O volatile /*!< defines 'write only' permissions */
+#define __IO volatile /*!< defines 'read / write' permissions */
+
+/*@} end of group CMSIS_core_definitions */
+
+
+
+/*******************************************************************************
+ * Register Abstraction
+ ******************************************************************************/
+/** \defgroup CMSIS_core_register CMSIS Core Register
+ Core Register contain:
+ - Core Register
+ - Core NVIC Register
+ - Core SCB Register
+ - Core SysTick Register
+ - Core Debug Register
+ - Core MPU Register
+ - Core FPU Register
+*/
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_CORE CMSIS Core
+ Type definitions for the Cortex-M Core Registers
+ @{
+ */
+
+/** \brief Union type to access the Application Program Status Register (APSR).
+ */
+typedef union
+{
+ struct
+ {
+#if (__CORTEX_M != 0x04)
+ uint32_t _reserved0:27; /*!< bit: 0..26 Reserved */
+#else
+ uint32_t _reserved0:16; /*!< bit: 0..15 Reserved */
+ uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */
+ uint32_t _reserved1:7; /*!< bit: 20..26 Reserved */
+#endif
+ uint32_t Q:1; /*!< bit: 27 Saturation condition flag */
+ uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
+ uint32_t C:1; /*!< bit: 29 Carry condition code flag */
+ uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
+ uint32_t N:1; /*!< bit: 31 Negative condition code flag */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} APSR_Type;
+
+
+/** \brief Union type to access the Interrupt Program Status Register (IPSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
+ uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} IPSR_Type;
+
+
+/** \brief Union type to access the Special-Purpose Program Status Registers (xPSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
+#if (__CORTEX_M != 0x04)
+ uint32_t _reserved0:15; /*!< bit: 9..23 Reserved */
+#else
+ uint32_t _reserved0:7; /*!< bit: 9..15 Reserved */
+ uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */
+ uint32_t _reserved1:4; /*!< bit: 20..23 Reserved */
+#endif
+ uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */
+ uint32_t IT:2; /*!< bit: 25..26 saved IT state (read 0) */
+ uint32_t Q:1; /*!< bit: 27 Saturation condition flag */
+ uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
+ uint32_t C:1; /*!< bit: 29 Carry condition code flag */
+ uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
+ uint32_t N:1; /*!< bit: 31 Negative condition code flag */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} xPSR_Type;
+
+
+/** \brief Union type to access the Control Registers (CONTROL).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */
+ uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */
+ uint32_t FPCA:1; /*!< bit: 2 FP extension active flag */
+ uint32_t _reserved0:29; /*!< bit: 3..31 Reserved */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} CONTROL_Type;
+
+/*@} end of group CMSIS_CORE */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_NVIC CMSIS NVIC
+ Type definitions for the Cortex-M NVIC Registers
+ @{
+ */
+
+/** \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC).
+ */
+typedef struct
+{
+ __IO uint32_t ISER[8]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */
+ uint32_t RESERVED0[24];
+ __IO uint32_t ICER[8]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */
+ uint32_t RSERVED1[24];
+ __IO uint32_t ISPR[8]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */
+ uint32_t RESERVED2[24];
+ __IO uint32_t ICPR[8]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */
+ uint32_t RESERVED3[24];
+ __IO uint32_t IABR[8]; /*!< Offset: 0x200 (R/W) Interrupt Active bit Register */
+ uint32_t RESERVED4[56];
+ __IO uint8_t IP[240]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register (8Bit wide) */
+ uint32_t RESERVED5[644];
+ __O uint32_t STIR; /*!< Offset: 0xE00 ( /W) Software Trigger Interrupt Register */
+} NVIC_Type;
+
+/* Software Triggered Interrupt Register Definitions */
+#define NVIC_STIR_INTID_Pos 0 /*!< STIR: INTLINESNUM Position */
+#define NVIC_STIR_INTID_Msk (0x1FFUL << NVIC_STIR_INTID_Pos) /*!< STIR: INTLINESNUM Mask */
+
+/*@} end of group CMSIS_NVIC */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_SCB CMSIS SCB
+ Type definitions for the Cortex-M System Control Block Registers
+ @{
+ */
+
+/** \brief Structure type to access the System Control Block (SCB).
+ */
+typedef struct
+{
+ __I uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */
+ __IO uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */
+ __IO uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */
+ __IO uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */
+ __IO uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */
+ __IO uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */
+ __IO uint8_t SHP[12]; /*!< Offset: 0x018 (R/W) System Handlers Priority Registers (4-7, 8-11, 12-15) */
+ __IO uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */
+ __IO uint32_t CFSR; /*!< Offset: 0x028 (R/W) Configurable Fault Status Register */
+ __IO uint32_t HFSR; /*!< Offset: 0x02C (R/W) HardFault Status Register */
+ __IO uint32_t DFSR; /*!< Offset: 0x030 (R/W) Debug Fault Status Register */
+ __IO uint32_t MMFAR; /*!< Offset: 0x034 (R/W) MemManage Fault Address Register */
+ __IO uint32_t BFAR; /*!< Offset: 0x038 (R/W) BusFault Address Register */
+ __IO uint32_t AFSR; /*!< Offset: 0x03C (R/W) Auxiliary Fault Status Register */
+ __I uint32_t PFR[2]; /*!< Offset: 0x040 (R/ ) Processor Feature Register */
+ __I uint32_t DFR; /*!< Offset: 0x048 (R/ ) Debug Feature Register */
+ __I uint32_t ADR; /*!< Offset: 0x04C (R/ ) Auxiliary Feature Register */
+ __I uint32_t MMFR[4]; /*!< Offset: 0x050 (R/ ) Memory Model Feature Register */
+ __I uint32_t ISAR[5]; /*!< Offset: 0x060 (R/ ) Instruction Set Attributes Register */
+ uint32_t RESERVED0[5];
+ __IO uint32_t CPACR; /*!< Offset: 0x088 (R/W) Coprocessor Access Control Register */
+} SCB_Type;
+
+/* SCB CPUID Register Definitions */
+#define SCB_CPUID_IMPLEMENTER_Pos 24 /*!< SCB CPUID: IMPLEMENTER Position */
+#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */
+
+#define SCB_CPUID_VARIANT_Pos 20 /*!< SCB CPUID: VARIANT Position */
+#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */
+
+#define SCB_CPUID_ARCHITECTURE_Pos 16 /*!< SCB CPUID: ARCHITECTURE Position */
+#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */
+
+#define SCB_CPUID_PARTNO_Pos 4 /*!< SCB CPUID: PARTNO Position */
+#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */
+
+#define SCB_CPUID_REVISION_Pos 0 /*!< SCB CPUID: REVISION Position */
+#define SCB_CPUID_REVISION_Msk (0xFUL << SCB_CPUID_REVISION_Pos) /*!< SCB CPUID: REVISION Mask */
+
+/* SCB Interrupt Control State Register Definitions */
+#define SCB_ICSR_NMIPENDSET_Pos 31 /*!< SCB ICSR: NMIPENDSET Position */
+#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */
+
+#define SCB_ICSR_PENDSVSET_Pos 28 /*!< SCB ICSR: PENDSVSET Position */
+#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */
+
+#define SCB_ICSR_PENDSVCLR_Pos 27 /*!< SCB ICSR: PENDSVCLR Position */
+#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */
+
+#define SCB_ICSR_PENDSTSET_Pos 26 /*!< SCB ICSR: PENDSTSET Position */
+#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */
+
+#define SCB_ICSR_PENDSTCLR_Pos 25 /*!< SCB ICSR: PENDSTCLR Position */
+#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */
+
+#define SCB_ICSR_ISRPREEMPT_Pos 23 /*!< SCB ICSR: ISRPREEMPT Position */
+#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */
+
+#define SCB_ICSR_ISRPENDING_Pos 22 /*!< SCB ICSR: ISRPENDING Position */
+#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */
+
+#define SCB_ICSR_VECTPENDING_Pos 12 /*!< SCB ICSR: VECTPENDING Position */
+#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */
+
+#define SCB_ICSR_RETTOBASE_Pos 11 /*!< SCB ICSR: RETTOBASE Position */
+#define SCB_ICSR_RETTOBASE_Msk (1UL << SCB_ICSR_RETTOBASE_Pos) /*!< SCB ICSR: RETTOBASE Mask */
+
+#define SCB_ICSR_VECTACTIVE_Pos 0 /*!< SCB ICSR: VECTACTIVE Position */
+#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL << SCB_ICSR_VECTACTIVE_Pos) /*!< SCB ICSR: VECTACTIVE Mask */
+
+/* SCB Vector Table Offset Register Definitions */
+#define SCB_VTOR_TBLOFF_Pos 7 /*!< SCB VTOR: TBLOFF Position */
+#define SCB_VTOR_TBLOFF_Msk (0x1FFFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */
+
+/* SCB Application Interrupt and Reset Control Register Definitions */
+#define SCB_AIRCR_VECTKEY_Pos 16 /*!< SCB AIRCR: VECTKEY Position */
+#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */
+
+#define SCB_AIRCR_VECTKEYSTAT_Pos 16 /*!< SCB AIRCR: VECTKEYSTAT Position */
+#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */
+
+#define SCB_AIRCR_ENDIANESS_Pos 15 /*!< SCB AIRCR: ENDIANESS Position */
+#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */
+
+#define SCB_AIRCR_PRIGROUP_Pos 8 /*!< SCB AIRCR: PRIGROUP Position */
+#define SCB_AIRCR_PRIGROUP_Msk (7UL << SCB_AIRCR_PRIGROUP_Pos) /*!< SCB AIRCR: PRIGROUP Mask */
+
+#define SCB_AIRCR_SYSRESETREQ_Pos 2 /*!< SCB AIRCR: SYSRESETREQ Position */
+#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */
+
+#define SCB_AIRCR_VECTCLRACTIVE_Pos 1 /*!< SCB AIRCR: VECTCLRACTIVE Position */
+#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */
+
+#define SCB_AIRCR_VECTRESET_Pos 0 /*!< SCB AIRCR: VECTRESET Position */
+#define SCB_AIRCR_VECTRESET_Msk (1UL << SCB_AIRCR_VECTRESET_Pos) /*!< SCB AIRCR: VECTRESET Mask */
+
+/* SCB System Control Register Definitions */
+#define SCB_SCR_SEVONPEND_Pos 4 /*!< SCB SCR: SEVONPEND Position */
+#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */
+
+#define SCB_SCR_SLEEPDEEP_Pos 2 /*!< SCB SCR: SLEEPDEEP Position */
+#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */
+
+#define SCB_SCR_SLEEPONEXIT_Pos 1 /*!< SCB SCR: SLEEPONEXIT Position */
+#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */
+
+/* SCB Configuration Control Register Definitions */
+#define SCB_CCR_STKALIGN_Pos 9 /*!< SCB CCR: STKALIGN Position */
+#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */
+
+#define SCB_CCR_BFHFNMIGN_Pos 8 /*!< SCB CCR: BFHFNMIGN Position */
+#define SCB_CCR_BFHFNMIGN_Msk (1UL << SCB_CCR_BFHFNMIGN_Pos) /*!< SCB CCR: BFHFNMIGN Mask */
+
+#define SCB_CCR_DIV_0_TRP_Pos 4 /*!< SCB CCR: DIV_0_TRP Position */
+#define SCB_CCR_DIV_0_TRP_Msk (1UL << SCB_CCR_DIV_0_TRP_Pos) /*!< SCB CCR: DIV_0_TRP Mask */
+
+#define SCB_CCR_UNALIGN_TRP_Pos 3 /*!< SCB CCR: UNALIGN_TRP Position */
+#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */
+
+#define SCB_CCR_USERSETMPEND_Pos 1 /*!< SCB CCR: USERSETMPEND Position */
+#define SCB_CCR_USERSETMPEND_Msk (1UL << SCB_CCR_USERSETMPEND_Pos) /*!< SCB CCR: USERSETMPEND Mask */
+
+#define SCB_CCR_NONBASETHRDENA_Pos 0 /*!< SCB CCR: NONBASETHRDENA Position */
+#define SCB_CCR_NONBASETHRDENA_Msk (1UL << SCB_CCR_NONBASETHRDENA_Pos) /*!< SCB CCR: NONBASETHRDENA Mask */
+
+/* SCB System Handler Control and State Register Definitions */
+#define SCB_SHCSR_USGFAULTENA_Pos 18 /*!< SCB SHCSR: USGFAULTENA Position */
+#define SCB_SHCSR_USGFAULTENA_Msk (1UL << SCB_SHCSR_USGFAULTENA_Pos) /*!< SCB SHCSR: USGFAULTENA Mask */
+
+#define SCB_SHCSR_BUSFAULTENA_Pos 17 /*!< SCB SHCSR: BUSFAULTENA Position */
+#define SCB_SHCSR_BUSFAULTENA_Msk (1UL << SCB_SHCSR_BUSFAULTENA_Pos) /*!< SCB SHCSR: BUSFAULTENA Mask */
+
+#define SCB_SHCSR_MEMFAULTENA_Pos 16 /*!< SCB SHCSR: MEMFAULTENA Position */
+#define SCB_SHCSR_MEMFAULTENA_Msk (1UL << SCB_SHCSR_MEMFAULTENA_Pos) /*!< SCB SHCSR: MEMFAULTENA Mask */
+
+#define SCB_SHCSR_SVCALLPENDED_Pos 15 /*!< SCB SHCSR: SVCALLPENDED Position */
+#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */
+
+#define SCB_SHCSR_BUSFAULTPENDED_Pos 14 /*!< SCB SHCSR: BUSFAULTPENDED Position */
+#define SCB_SHCSR_BUSFAULTPENDED_Msk (1UL << SCB_SHCSR_BUSFAULTPENDED_Pos) /*!< SCB SHCSR: BUSFAULTPENDED Mask */
+
+#define SCB_SHCSR_MEMFAULTPENDED_Pos 13 /*!< SCB SHCSR: MEMFAULTPENDED Position */
+#define SCB_SHCSR_MEMFAULTPENDED_Msk (1UL << SCB_SHCSR_MEMFAULTPENDED_Pos) /*!< SCB SHCSR: MEMFAULTPENDED Mask */
+
+#define SCB_SHCSR_USGFAULTPENDED_Pos 12 /*!< SCB SHCSR: USGFAULTPENDED Position */
+#define SCB_SHCSR_USGFAULTPENDED_Msk (1UL << SCB_SHCSR_USGFAULTPENDED_Pos) /*!< SCB SHCSR: USGFAULTPENDED Mask */
+
+#define SCB_SHCSR_SYSTICKACT_Pos 11 /*!< SCB SHCSR: SYSTICKACT Position */
+#define SCB_SHCSR_SYSTICKACT_Msk (1UL << SCB_SHCSR_SYSTICKACT_Pos) /*!< SCB SHCSR: SYSTICKACT Mask */
+
+#define SCB_SHCSR_PENDSVACT_Pos 10 /*!< SCB SHCSR: PENDSVACT Position */
+#define SCB_SHCSR_PENDSVACT_Msk (1UL << SCB_SHCSR_PENDSVACT_Pos) /*!< SCB SHCSR: PENDSVACT Mask */
+
+#define SCB_SHCSR_MONITORACT_Pos 8 /*!< SCB SHCSR: MONITORACT Position */
+#define SCB_SHCSR_MONITORACT_Msk (1UL << SCB_SHCSR_MONITORACT_Pos) /*!< SCB SHCSR: MONITORACT Mask */
+
+#define SCB_SHCSR_SVCALLACT_Pos 7 /*!< SCB SHCSR: SVCALLACT Position */
+#define SCB_SHCSR_SVCALLACT_Msk (1UL << SCB_SHCSR_SVCALLACT_Pos) /*!< SCB SHCSR: SVCALLACT Mask */
+
+#define SCB_SHCSR_USGFAULTACT_Pos 3 /*!< SCB SHCSR: USGFAULTACT Position */
+#define SCB_SHCSR_USGFAULTACT_Msk (1UL << SCB_SHCSR_USGFAULTACT_Pos) /*!< SCB SHCSR: USGFAULTACT Mask */
+
+#define SCB_SHCSR_BUSFAULTACT_Pos 1 /*!< SCB SHCSR: BUSFAULTACT Position */
+#define SCB_SHCSR_BUSFAULTACT_Msk (1UL << SCB_SHCSR_BUSFAULTACT_Pos) /*!< SCB SHCSR: BUSFAULTACT Mask */
+
+#define SCB_SHCSR_MEMFAULTACT_Pos 0 /*!< SCB SHCSR: MEMFAULTACT Position */
+#define SCB_SHCSR_MEMFAULTACT_Msk (1UL << SCB_SHCSR_MEMFAULTACT_Pos) /*!< SCB SHCSR: MEMFAULTACT Mask */
+
+/* SCB Configurable Fault Status Registers Definitions */
+#define SCB_CFSR_USGFAULTSR_Pos 16 /*!< SCB CFSR: Usage Fault Status Register Position */
+#define SCB_CFSR_USGFAULTSR_Msk (0xFFFFUL << SCB_CFSR_USGFAULTSR_Pos) /*!< SCB CFSR: Usage Fault Status Register Mask */
+
+#define SCB_CFSR_BUSFAULTSR_Pos 8 /*!< SCB CFSR: Bus Fault Status Register Position */
+#define SCB_CFSR_BUSFAULTSR_Msk (0xFFUL << SCB_CFSR_BUSFAULTSR_Pos) /*!< SCB CFSR: Bus Fault Status Register Mask */
+
+#define SCB_CFSR_MEMFAULTSR_Pos 0 /*!< SCB CFSR: Memory Manage Fault Status Register Position */
+#define SCB_CFSR_MEMFAULTSR_Msk (0xFFUL << SCB_CFSR_MEMFAULTSR_Pos) /*!< SCB CFSR: Memory Manage Fault Status Register Mask */
+
+/* SCB Hard Fault Status Registers Definitions */
+#define SCB_HFSR_DEBUGEVT_Pos 31 /*!< SCB HFSR: DEBUGEVT Position */
+#define SCB_HFSR_DEBUGEVT_Msk (1UL << SCB_HFSR_DEBUGEVT_Pos) /*!< SCB HFSR: DEBUGEVT Mask */
+
+#define SCB_HFSR_FORCED_Pos 30 /*!< SCB HFSR: FORCED Position */
+#define SCB_HFSR_FORCED_Msk (1UL << SCB_HFSR_FORCED_Pos) /*!< SCB HFSR: FORCED Mask */
+
+#define SCB_HFSR_VECTTBL_Pos 1 /*!< SCB HFSR: VECTTBL Position */
+#define SCB_HFSR_VECTTBL_Msk (1UL << SCB_HFSR_VECTTBL_Pos) /*!< SCB HFSR: VECTTBL Mask */
+
+/* SCB Debug Fault Status Register Definitions */
+#define SCB_DFSR_EXTERNAL_Pos 4 /*!< SCB DFSR: EXTERNAL Position */
+#define SCB_DFSR_EXTERNAL_Msk (1UL << SCB_DFSR_EXTERNAL_Pos) /*!< SCB DFSR: EXTERNAL Mask */
+
+#define SCB_DFSR_VCATCH_Pos 3 /*!< SCB DFSR: VCATCH Position */
+#define SCB_DFSR_VCATCH_Msk (1UL << SCB_DFSR_VCATCH_Pos) /*!< SCB DFSR: VCATCH Mask */
+
+#define SCB_DFSR_DWTTRAP_Pos 2 /*!< SCB DFSR: DWTTRAP Position */
+#define SCB_DFSR_DWTTRAP_Msk (1UL << SCB_DFSR_DWTTRAP_Pos) /*!< SCB DFSR: DWTTRAP Mask */
+
+#define SCB_DFSR_BKPT_Pos 1 /*!< SCB DFSR: BKPT Position */
+#define SCB_DFSR_BKPT_Msk (1UL << SCB_DFSR_BKPT_Pos) /*!< SCB DFSR: BKPT Mask */
+
+#define SCB_DFSR_HALTED_Pos 0 /*!< SCB DFSR: HALTED Position */
+#define SCB_DFSR_HALTED_Msk (1UL << SCB_DFSR_HALTED_Pos) /*!< SCB DFSR: HALTED Mask */
+
+/*@} end of group CMSIS_SCB */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_SCnSCB CMSIS System Control and ID Register not in the SCB
+ Type definitions for the Cortex-M System Control and ID Register not in the SCB
+ @{
+ */
+
+/** \brief Structure type to access the System Control and ID Register not in the SCB.
+ */
+typedef struct
+{
+ uint32_t RESERVED0[1];
+ __I uint32_t ICTR; /*!< Offset: 0x004 (R/ ) Interrupt Controller Type Register */
+ __IO uint32_t ACTLR; /*!< Offset: 0x008 (R/W) Auxiliary Control Register */
+} SCnSCB_Type;
+
+/* Interrupt Controller Type Register Definitions */
+#define SCnSCB_ICTR_INTLINESNUM_Pos 0 /*!< ICTR: INTLINESNUM Position */
+#define SCnSCB_ICTR_INTLINESNUM_Msk (0xFUL << SCnSCB_ICTR_INTLINESNUM_Pos) /*!< ICTR: INTLINESNUM Mask */
+
+/* Auxiliary Control Register Definitions */
+#define SCnSCB_ACTLR_DISOOFP_Pos 9 /*!< ACTLR: DISOOFP Position */
+#define SCnSCB_ACTLR_DISOOFP_Msk (1UL << SCnSCB_ACTLR_DISOOFP_Pos) /*!< ACTLR: DISOOFP Mask */
+
+#define SCnSCB_ACTLR_DISFPCA_Pos 8 /*!< ACTLR: DISFPCA Position */
+#define SCnSCB_ACTLR_DISFPCA_Msk (1UL << SCnSCB_ACTLR_DISFPCA_Pos) /*!< ACTLR: DISFPCA Mask */
+
+#define SCnSCB_ACTLR_DISFOLD_Pos 2 /*!< ACTLR: DISFOLD Position */
+#define SCnSCB_ACTLR_DISFOLD_Msk (1UL << SCnSCB_ACTLR_DISFOLD_Pos) /*!< ACTLR: DISFOLD Mask */
+
+#define SCnSCB_ACTLR_DISDEFWBUF_Pos 1 /*!< ACTLR: DISDEFWBUF Position */
+#define SCnSCB_ACTLR_DISDEFWBUF_Msk (1UL << SCnSCB_ACTLR_DISDEFWBUF_Pos) /*!< ACTLR: DISDEFWBUF Mask */
+
+#define SCnSCB_ACTLR_DISMCYCINT_Pos 0 /*!< ACTLR: DISMCYCINT Position */
+#define SCnSCB_ACTLR_DISMCYCINT_Msk (1UL << SCnSCB_ACTLR_DISMCYCINT_Pos) /*!< ACTLR: DISMCYCINT Mask */
+
+/*@} end of group CMSIS_SCnotSCB */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_SysTick CMSIS SysTick
+ Type definitions for the Cortex-M System Timer Registers
+ @{
+ */
+
+/** \brief Structure type to access the System Timer (SysTick).
+ */
+typedef struct
+{
+ __IO uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */
+ __IO uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */
+ __IO uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */
+ __I uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */
+} SysTick_Type;
+
+/* SysTick Control / Status Register Definitions */
+#define SysTick_CTRL_COUNTFLAG_Pos 16 /*!< SysTick CTRL: COUNTFLAG Position */
+#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */
+
+#define SysTick_CTRL_CLKSOURCE_Pos 2 /*!< SysTick CTRL: CLKSOURCE Position */
+#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */
+
+#define SysTick_CTRL_TICKINT_Pos 1 /*!< SysTick CTRL: TICKINT Position */
+#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */
+
+#define SysTick_CTRL_ENABLE_Pos 0 /*!< SysTick CTRL: ENABLE Position */
+#define SysTick_CTRL_ENABLE_Msk (1UL << SysTick_CTRL_ENABLE_Pos) /*!< SysTick CTRL: ENABLE Mask */
+
+/* SysTick Reload Register Definitions */
+#define SysTick_LOAD_RELOAD_Pos 0 /*!< SysTick LOAD: RELOAD Position */
+#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL << SysTick_LOAD_RELOAD_Pos) /*!< SysTick LOAD: RELOAD Mask */
+
+/* SysTick Current Register Definitions */
+#define SysTick_VAL_CURRENT_Pos 0 /*!< SysTick VAL: CURRENT Position */
+#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL << SysTick_VAL_CURRENT_Pos) /*!< SysTick VAL: CURRENT Mask */
+
+/* SysTick Calibration Register Definitions */
+#define SysTick_CALIB_NOREF_Pos 31 /*!< SysTick CALIB: NOREF Position */
+#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */
+
+#define SysTick_CALIB_SKEW_Pos 30 /*!< SysTick CALIB: SKEW Position */
+#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */
+
+#define SysTick_CALIB_TENMS_Pos 0 /*!< SysTick CALIB: TENMS Position */
+#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL << SysTick_VAL_CURRENT_Pos) /*!< SysTick CALIB: TENMS Mask */
+
+/*@} end of group CMSIS_SysTick */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_ITM CMSIS ITM
+ Type definitions for the Cortex-M Instrumentation Trace Macrocell (ITM)
+ @{
+ */
+
+/** \brief Structure type to access the Instrumentation Trace Macrocell Register (ITM).
+ */
+typedef struct
+{
+ __O union
+ {
+ __O uint8_t u8; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 8-bit */
+ __O uint16_t u16; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 16-bit */
+ __O uint32_t u32; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 32-bit */
+ } PORT [32]; /*!< Offset: 0x000 ( /W) ITM Stimulus Port Registers */
+ uint32_t RESERVED0[864];
+ __IO uint32_t TER; /*!< Offset: 0xE00 (R/W) ITM Trace Enable Register */
+ uint32_t RESERVED1[15];
+ __IO uint32_t TPR; /*!< Offset: 0xE40 (R/W) ITM Trace Privilege Register */
+ uint32_t RESERVED2[15];
+ __IO uint32_t TCR; /*!< Offset: 0xE80 (R/W) ITM Trace Control Register */
+} ITM_Type;
+
+/* ITM Trace Privilege Register Definitions */
+#define ITM_TPR_PRIVMASK_Pos 0 /*!< ITM TPR: PRIVMASK Position */
+#define ITM_TPR_PRIVMASK_Msk (0xFUL << ITM_TPR_PRIVMASK_Pos) /*!< ITM TPR: PRIVMASK Mask */
+
+/* ITM Trace Control Register Definitions */
+#define ITM_TCR_BUSY_Pos 23 /*!< ITM TCR: BUSY Position */
+#define ITM_TCR_BUSY_Msk (1UL << ITM_TCR_BUSY_Pos) /*!< ITM TCR: BUSY Mask */
+
+#define ITM_TCR_TraceBusID_Pos 16 /*!< ITM TCR: ATBID Position */
+#define ITM_TCR_TraceBusID_Msk (0x7FUL << ITM_TCR_TraceBusID_Pos) /*!< ITM TCR: ATBID Mask */
+
+#define ITM_TCR_GTSFREQ_Pos 10 /*!< ITM TCR: Global timestamp frequency Position */
+#define ITM_TCR_GTSFREQ_Msk (3UL << ITM_TCR_GTSFREQ_Pos) /*!< ITM TCR: Global timestamp frequency Mask */
+
+#define ITM_TCR_TSPrescale_Pos 8 /*!< ITM TCR: TSPrescale Position */
+#define ITM_TCR_TSPrescale_Msk (3UL << ITM_TCR_TSPrescale_Pos) /*!< ITM TCR: TSPrescale Mask */
+
+#define ITM_TCR_SWOENA_Pos 4 /*!< ITM TCR: SWOENA Position */
+#define ITM_TCR_SWOENA_Msk (1UL << ITM_TCR_SWOENA_Pos) /*!< ITM TCR: SWOENA Mask */
+
+#define ITM_TCR_TXENA_Pos 3 /*!< ITM TCR: TXENA Position */
+#define ITM_TCR_TXENA_Msk (1UL << ITM_TCR_TXENA_Pos) /*!< ITM TCR: TXENA Mask */
+
+#define ITM_TCR_SYNCENA_Pos 2 /*!< ITM TCR: SYNCENA Position */
+#define ITM_TCR_SYNCENA_Msk (1UL << ITM_TCR_SYNCENA_Pos) /*!< ITM TCR: SYNCENA Mask */
+
+#define ITM_TCR_TSENA_Pos 1 /*!< ITM TCR: TSENA Position */
+#define ITM_TCR_TSENA_Msk (1UL << ITM_TCR_TSENA_Pos) /*!< ITM TCR: TSENA Mask */
+
+#define ITM_TCR_ITMENA_Pos 0 /*!< ITM TCR: ITM Enable bit Position */
+#define ITM_TCR_ITMENA_Msk (1UL << ITM_TCR_ITMENA_Pos) /*!< ITM TCR: ITM Enable bit Mask */
+
+/*@}*/ /* end of group CMSIS_ITM */
+
+
+#if (__MPU_PRESENT == 1)
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_MPU CMSIS MPU
+ Type definitions for the Cortex-M Memory Protection Unit (MPU)
+ @{
+ */
+
+/** \brief Structure type to access the Memory Protection Unit (MPU).
+ */
+typedef struct
+{
+ __I uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */
+ __IO uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */
+ __IO uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region RNRber Register */
+ __IO uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */
+ __IO uint32_t RASR; /*!< Offset: 0x010 (R/W) MPU Region Attribute and Size Register */
+ __IO uint32_t RBAR_A1; /*!< Offset: 0x014 (R/W) MPU Alias 1 Region Base Address Register */
+ __IO uint32_t RASR_A1; /*!< Offset: 0x018 (R/W) MPU Alias 1 Region Attribute and Size Register */
+ __IO uint32_t RBAR_A2; /*!< Offset: 0x01C (R/W) MPU Alias 2 Region Base Address Register */
+ __IO uint32_t RASR_A2; /*!< Offset: 0x020 (R/W) MPU Alias 2 Region Attribute and Size Register */
+ __IO uint32_t RBAR_A3; /*!< Offset: 0x024 (R/W) MPU Alias 3 Region Base Address Register */
+ __IO uint32_t RASR_A3; /*!< Offset: 0x028 (R/W) MPU Alias 3 Region Attribute and Size Register */
+} MPU_Type;
+
+/* MPU Type Register */
+#define MPU_TYPE_IREGION_Pos 16 /*!< MPU TYPE: IREGION Position */
+#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */
+
+#define MPU_TYPE_DREGION_Pos 8 /*!< MPU TYPE: DREGION Position */
+#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */
+
+#define MPU_TYPE_SEPARATE_Pos 0 /*!< MPU TYPE: SEPARATE Position */
+#define MPU_TYPE_SEPARATE_Msk (1UL << MPU_TYPE_SEPARATE_Pos) /*!< MPU TYPE: SEPARATE Mask */
+
+/* MPU Control Register */
+#define MPU_CTRL_PRIVDEFENA_Pos 2 /*!< MPU CTRL: PRIVDEFENA Position */
+#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */
+
+#define MPU_CTRL_HFNMIENA_Pos 1 /*!< MPU CTRL: HFNMIENA Position */
+#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */
+
+#define MPU_CTRL_ENABLE_Pos 0 /*!< MPU CTRL: ENABLE Position */
+#define MPU_CTRL_ENABLE_Msk (1UL << MPU_CTRL_ENABLE_Pos) /*!< MPU CTRL: ENABLE Mask */
+
+/* MPU Region Number Register */
+#define MPU_RNR_REGION_Pos 0 /*!< MPU RNR: REGION Position */
+#define MPU_RNR_REGION_Msk (0xFFUL << MPU_RNR_REGION_Pos) /*!< MPU RNR: REGION Mask */
+
+/* MPU Region Base Address Register */
+#define MPU_RBAR_ADDR_Pos 5 /*!< MPU RBAR: ADDR Position */
+#define MPU_RBAR_ADDR_Msk (0x7FFFFFFUL << MPU_RBAR_ADDR_Pos) /*!< MPU RBAR: ADDR Mask */
+
+#define MPU_RBAR_VALID_Pos 4 /*!< MPU RBAR: VALID Position */
+#define MPU_RBAR_VALID_Msk (1UL << MPU_RBAR_VALID_Pos) /*!< MPU RBAR: VALID Mask */
+
+#define MPU_RBAR_REGION_Pos 0 /*!< MPU RBAR: REGION Position */
+#define MPU_RBAR_REGION_Msk (0xFUL << MPU_RBAR_REGION_Pos) /*!< MPU RBAR: REGION Mask */
+
+/* MPU Region Attribute and Size Register */
+#define MPU_RASR_ATTRS_Pos 16 /*!< MPU RASR: MPU Region Attribute field Position */
+#define MPU_RASR_ATTRS_Msk (0xFFFFUL << MPU_RASR_ATTRS_Pos) /*!< MPU RASR: MPU Region Attribute field Mask */
+
+#define MPU_RASR_SRD_Pos 8 /*!< MPU RASR: Sub-Region Disable Position */
+#define MPU_RASR_SRD_Msk (0xFFUL << MPU_RASR_SRD_Pos) /*!< MPU RASR: Sub-Region Disable Mask */
+
+#define MPU_RASR_SIZE_Pos 1 /*!< MPU RASR: Region Size Field Position */
+#define MPU_RASR_SIZE_Msk (0x1FUL << MPU_RASR_SIZE_Pos) /*!< MPU RASR: Region Size Field Mask */
+
+#define MPU_RASR_ENABLE_Pos 0 /*!< MPU RASR: Region enable bit Position */
+#define MPU_RASR_ENABLE_Msk (1UL << MPU_RASR_ENABLE_Pos) /*!< MPU RASR: Region enable bit Disable Mask */
+
+/*@} end of group CMSIS_MPU */
+#endif
+
+
+#if (__FPU_PRESENT == 1)
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_FPU CMSIS FPU
+ Type definitions for the Cortex-M Floating Point Unit (FPU)
+ @{
+ */
+
+/** \brief Structure type to access the Floating Point Unit (FPU).
+ */
+typedef struct
+{
+ uint32_t RESERVED0[1];
+ __IO uint32_t FPCCR; /*!< Offset: 0x004 (R/W) Floating-Point Context Control Register */
+ __IO uint32_t FPCAR; /*!< Offset: 0x008 (R/W) Floating-Point Context Address Register */
+ __IO uint32_t FPDSCR; /*!< Offset: 0x00C (R/W) Floating-Point Default Status Control Register */
+ __I uint32_t MVFR0; /*!< Offset: 0x010 (R/ ) Media and FP Feature Register 0 */
+ __I uint32_t MVFR1; /*!< Offset: 0x014 (R/ ) Media and FP Feature Register 1 */
+} FPU_Type;
+
+/* Floating-Point Context Control Register */
+#define FPU_FPCCR_ASPEN_Pos 31 /*!< FPCCR: ASPEN bit Position */
+#define FPU_FPCCR_ASPEN_Msk (1UL << FPU_FPCCR_ASPEN_Pos) /*!< FPCCR: ASPEN bit Mask */
+
+#define FPU_FPCCR_LSPEN_Pos 30 /*!< FPCCR: LSPEN Position */
+#define FPU_FPCCR_LSPEN_Msk (1UL << FPU_FPCCR_LSPEN_Pos) /*!< FPCCR: LSPEN bit Mask */
+
+#define FPU_FPCCR_MONRDY_Pos 8 /*!< FPCCR: MONRDY Position */
+#define FPU_FPCCR_MONRDY_Msk (1UL << FPU_FPCCR_MONRDY_Pos) /*!< FPCCR: MONRDY bit Mask */
+
+#define FPU_FPCCR_BFRDY_Pos 6 /*!< FPCCR: BFRDY Position */
+#define FPU_FPCCR_BFRDY_Msk (1UL << FPU_FPCCR_BFRDY_Pos) /*!< FPCCR: BFRDY bit Mask */
+
+#define FPU_FPCCR_MMRDY_Pos 5 /*!< FPCCR: MMRDY Position */
+#define FPU_FPCCR_MMRDY_Msk (1UL << FPU_FPCCR_MMRDY_Pos) /*!< FPCCR: MMRDY bit Mask */
+
+#define FPU_FPCCR_HFRDY_Pos 4 /*!< FPCCR: HFRDY Position */
+#define FPU_FPCCR_HFRDY_Msk (1UL << FPU_FPCCR_HFRDY_Pos) /*!< FPCCR: HFRDY bit Mask */
+
+#define FPU_FPCCR_THREAD_Pos 3 /*!< FPCCR: processor mode bit Position */
+#define FPU_FPCCR_THREAD_Msk (1UL << FPU_FPCCR_THREAD_Pos) /*!< FPCCR: processor mode active bit Mask */
+
+#define FPU_FPCCR_USER_Pos 1 /*!< FPCCR: privilege level bit Position */
+#define FPU_FPCCR_USER_Msk (1UL << FPU_FPCCR_USER_Pos) /*!< FPCCR: privilege level bit Mask */
+
+#define FPU_FPCCR_LSPACT_Pos 0 /*!< FPCCR: Lazy state preservation active bit Position */
+#define FPU_FPCCR_LSPACT_Msk (1UL << FPU_FPCCR_LSPACT_Pos) /*!< FPCCR: Lazy state preservation active bit Mask */
+
+/* Floating-Point Context Address Register */
+#define FPU_FPCAR_ADDRESS_Pos 3 /*!< FPCAR: ADDRESS bit Position */
+#define FPU_FPCAR_ADDRESS_Msk (0x1FFFFFFFUL << FPU_FPCAR_ADDRESS_Pos) /*!< FPCAR: ADDRESS bit Mask */
+
+/* Floating-Point Default Status Control Register */
+#define FPU_FPDSCR_AHP_Pos 26 /*!< FPDSCR: AHP bit Position */
+#define FPU_FPDSCR_AHP_Msk (1UL << FPU_FPDSCR_AHP_Pos) /*!< FPDSCR: AHP bit Mask */
+
+#define FPU_FPDSCR_DN_Pos 25 /*!< FPDSCR: DN bit Position */
+#define FPU_FPDSCR_DN_Msk (1UL << FPU_FPDSCR_DN_Pos) /*!< FPDSCR: DN bit Mask */
+
+#define FPU_FPDSCR_FZ_Pos 24 /*!< FPDSCR: FZ bit Position */
+#define FPU_FPDSCR_FZ_Msk (1UL << FPU_FPDSCR_FZ_Pos) /*!< FPDSCR: FZ bit Mask */
+
+#define FPU_FPDSCR_RMode_Pos 22 /*!< FPDSCR: RMode bit Position */
+#define FPU_FPDSCR_RMode_Msk (3UL << FPU_FPDSCR_RMode_Pos) /*!< FPDSCR: RMode bit Mask */
+
+/* Media and FP Feature Register 0 */
+#define FPU_MVFR0_FP_rounding_modes_Pos 28 /*!< MVFR0: FP rounding modes bits Position */
+#define FPU_MVFR0_FP_rounding_modes_Msk (0xFUL << FPU_MVFR0_FP_rounding_modes_Pos) /*!< MVFR0: FP rounding modes bits Mask */
+
+#define FPU_MVFR0_Short_vectors_Pos 24 /*!< MVFR0: Short vectors bits Position */
+#define FPU_MVFR0_Short_vectors_Msk (0xFUL << FPU_MVFR0_Short_vectors_Pos) /*!< MVFR0: Short vectors bits Mask */
+
+#define FPU_MVFR0_Square_root_Pos 20 /*!< MVFR0: Square root bits Position */
+#define FPU_MVFR0_Square_root_Msk (0xFUL << FPU_MVFR0_Square_root_Pos) /*!< MVFR0: Square root bits Mask */
+
+#define FPU_MVFR0_Divide_Pos 16 /*!< MVFR0: Divide bits Position */
+#define FPU_MVFR0_Divide_Msk (0xFUL << FPU_MVFR0_Divide_Pos) /*!< MVFR0: Divide bits Mask */
+
+#define FPU_MVFR0_FP_excep_trapping_Pos 12 /*!< MVFR0: FP exception trapping bits Position */
+#define FPU_MVFR0_FP_excep_trapping_Msk (0xFUL << FPU_MVFR0_FP_excep_trapping_Pos) /*!< MVFR0: FP exception trapping bits Mask */
+
+#define FPU_MVFR0_Double_precision_Pos 8 /*!< MVFR0: Double-precision bits Position */
+#define FPU_MVFR0_Double_precision_Msk (0xFUL << FPU_MVFR0_Double_precision_Pos) /*!< MVFR0: Double-precision bits Mask */
+
+#define FPU_MVFR0_Single_precision_Pos 4 /*!< MVFR0: Single-precision bits Position */
+#define FPU_MVFR0_Single_precision_Msk (0xFUL << FPU_MVFR0_Single_precision_Pos) /*!< MVFR0: Single-precision bits Mask */
+
+#define FPU_MVFR0_A_SIMD_registers_Pos 0 /*!< MVFR0: A_SIMD registers bits Position */
+#define FPU_MVFR0_A_SIMD_registers_Msk (0xFUL << FPU_MVFR0_A_SIMD_registers_Pos) /*!< MVFR0: A_SIMD registers bits Mask */
+
+/* Media and FP Feature Register 1 */
+#define FPU_MVFR1_FP_fused_MAC_Pos 28 /*!< MVFR1: FP fused MAC bits Position */
+#define FPU_MVFR1_FP_fused_MAC_Msk (0xFUL << FPU_MVFR1_FP_fused_MAC_Pos) /*!< MVFR1: FP fused MAC bits Mask */
+
+#define FPU_MVFR1_FP_HPFP_Pos 24 /*!< MVFR1: FP HPFP bits Position */
+#define FPU_MVFR1_FP_HPFP_Msk (0xFUL << FPU_MVFR1_FP_HPFP_Pos) /*!< MVFR1: FP HPFP bits Mask */
+
+#define FPU_MVFR1_D_NaN_mode_Pos 4 /*!< MVFR1: D_NaN mode bits Position */
+#define FPU_MVFR1_D_NaN_mode_Msk (0xFUL << FPU_MVFR1_D_NaN_mode_Pos) /*!< MVFR1: D_NaN mode bits Mask */
+
+#define FPU_MVFR1_FtZ_mode_Pos 0 /*!< MVFR1: FtZ mode bits Position */
+#define FPU_MVFR1_FtZ_mode_Msk (0xFUL << FPU_MVFR1_FtZ_mode_Pos) /*!< MVFR1: FtZ mode bits Mask */
+
+/*@} end of group CMSIS_FPU */
+#endif
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_CoreDebug CMSIS Core Debug
+ Type definitions for the Cortex-M Core Debug Registers
+ @{
+ */
+
+/** \brief Structure type to access the Core Debug Register (CoreDebug).
+ */
+typedef struct
+{
+ __IO uint32_t DHCSR; /*!< Offset: 0x000 (R/W) Debug Halting Control and Status Register */
+ __O uint32_t DCRSR; /*!< Offset: 0x004 ( /W) Debug Core Register Selector Register */
+ __IO uint32_t DCRDR; /*!< Offset: 0x008 (R/W) Debug Core Register Data Register */
+ __IO uint32_t DEMCR; /*!< Offset: 0x00C (R/W) Debug Exception and Monitor Control Register */
+} CoreDebug_Type;
+
+/* Debug Halting Control and Status Register */
+#define CoreDebug_DHCSR_DBGKEY_Pos 16 /*!< CoreDebug DHCSR: DBGKEY Position */
+#define CoreDebug_DHCSR_DBGKEY_Msk (0xFFFFUL << CoreDebug_DHCSR_DBGKEY_Pos) /*!< CoreDebug DHCSR: DBGKEY Mask */
+
+#define CoreDebug_DHCSR_S_RESET_ST_Pos 25 /*!< CoreDebug DHCSR: S_RESET_ST Position */
+#define CoreDebug_DHCSR_S_RESET_ST_Msk (1UL << CoreDebug_DHCSR_S_RESET_ST_Pos) /*!< CoreDebug DHCSR: S_RESET_ST Mask */
+
+#define CoreDebug_DHCSR_S_RETIRE_ST_Pos 24 /*!< CoreDebug DHCSR: S_RETIRE_ST Position */
+#define CoreDebug_DHCSR_S_RETIRE_ST_Msk (1UL << CoreDebug_DHCSR_S_RETIRE_ST_Pos) /*!< CoreDebug DHCSR: S_RETIRE_ST Mask */
+
+#define CoreDebug_DHCSR_S_LOCKUP_Pos 19 /*!< CoreDebug DHCSR: S_LOCKUP Position */
+#define CoreDebug_DHCSR_S_LOCKUP_Msk (1UL << CoreDebug_DHCSR_S_LOCKUP_Pos) /*!< CoreDebug DHCSR: S_LOCKUP Mask */
+
+#define CoreDebug_DHCSR_S_SLEEP_Pos 18 /*!< CoreDebug DHCSR: S_SLEEP Position */
+#define CoreDebug_DHCSR_S_SLEEP_Msk (1UL << CoreDebug_DHCSR_S_SLEEP_Pos) /*!< CoreDebug DHCSR: S_SLEEP Mask */
+
+#define CoreDebug_DHCSR_S_HALT_Pos 17 /*!< CoreDebug DHCSR: S_HALT Position */
+#define CoreDebug_DHCSR_S_HALT_Msk (1UL << CoreDebug_DHCSR_S_HALT_Pos) /*!< CoreDebug DHCSR: S_HALT Mask */
+
+#define CoreDebug_DHCSR_S_REGRDY_Pos 16 /*!< CoreDebug DHCSR: S_REGRDY Position */
+#define CoreDebug_DHCSR_S_REGRDY_Msk (1UL << CoreDebug_DHCSR_S_REGRDY_Pos) /*!< CoreDebug DHCSR: S_REGRDY Mask */
+
+#define CoreDebug_DHCSR_C_SNAPSTALL_Pos 5 /*!< CoreDebug DHCSR: C_SNAPSTALL Position */
+#define CoreDebug_DHCSR_C_SNAPSTALL_Msk (1UL << CoreDebug_DHCSR_C_SNAPSTALL_Pos) /*!< CoreDebug DHCSR: C_SNAPSTALL Mask */
+
+#define CoreDebug_DHCSR_C_MASKINTS_Pos 3 /*!< CoreDebug DHCSR: C_MASKINTS Position */
+#define CoreDebug_DHCSR_C_MASKINTS_Msk (1UL << CoreDebug_DHCSR_C_MASKINTS_Pos) /*!< CoreDebug DHCSR: C_MASKINTS Mask */
+
+#define CoreDebug_DHCSR_C_STEP_Pos 2 /*!< CoreDebug DHCSR: C_STEP Position */
+#define CoreDebug_DHCSR_C_STEP_Msk (1UL << CoreDebug_DHCSR_C_STEP_Pos) /*!< CoreDebug DHCSR: C_STEP Mask */
+
+#define CoreDebug_DHCSR_C_HALT_Pos 1 /*!< CoreDebug DHCSR: C_HALT Position */
+#define CoreDebug_DHCSR_C_HALT_Msk (1UL << CoreDebug_DHCSR_C_HALT_Pos) /*!< CoreDebug DHCSR: C_HALT Mask */
+
+#define CoreDebug_DHCSR_C_DEBUGEN_Pos 0 /*!< CoreDebug DHCSR: C_DEBUGEN Position */
+#define CoreDebug_DHCSR_C_DEBUGEN_Msk (1UL << CoreDebug_DHCSR_C_DEBUGEN_Pos) /*!< CoreDebug DHCSR: C_DEBUGEN Mask */
+
+/* Debug Core Register Selector Register */
+#define CoreDebug_DCRSR_REGWnR_Pos 16 /*!< CoreDebug DCRSR: REGWnR Position */
+#define CoreDebug_DCRSR_REGWnR_Msk (1UL << CoreDebug_DCRSR_REGWnR_Pos) /*!< CoreDebug DCRSR: REGWnR Mask */
+
+#define CoreDebug_DCRSR_REGSEL_Pos 0 /*!< CoreDebug DCRSR: REGSEL Position */
+#define CoreDebug_DCRSR_REGSEL_Msk (0x1FUL << CoreDebug_DCRSR_REGSEL_Pos) /*!< CoreDebug DCRSR: REGSEL Mask */
+
+/* Debug Exception and Monitor Control Register */
+#define CoreDebug_DEMCR_TRCENA_Pos 24 /*!< CoreDebug DEMCR: TRCENA Position */
+#define CoreDebug_DEMCR_TRCENA_Msk (1UL << CoreDebug_DEMCR_TRCENA_Pos) /*!< CoreDebug DEMCR: TRCENA Mask */
+
+#define CoreDebug_DEMCR_MON_REQ_Pos 19 /*!< CoreDebug DEMCR: MON_REQ Position */
+#define CoreDebug_DEMCR_MON_REQ_Msk (1UL << CoreDebug_DEMCR_MON_REQ_Pos) /*!< CoreDebug DEMCR: MON_REQ Mask */
+
+#define CoreDebug_DEMCR_MON_STEP_Pos 18 /*!< CoreDebug DEMCR: MON_STEP Position */
+#define CoreDebug_DEMCR_MON_STEP_Msk (1UL << CoreDebug_DEMCR_MON_STEP_Pos) /*!< CoreDebug DEMCR: MON_STEP Mask */
+
+#define CoreDebug_DEMCR_MON_PEND_Pos 17 /*!< CoreDebug DEMCR: MON_PEND Position */
+#define CoreDebug_DEMCR_MON_PEND_Msk (1UL << CoreDebug_DEMCR_MON_PEND_Pos) /*!< CoreDebug DEMCR: MON_PEND Mask */
+
+#define CoreDebug_DEMCR_MON_EN_Pos 16 /*!< CoreDebug DEMCR: MON_EN Position */
+#define CoreDebug_DEMCR_MON_EN_Msk (1UL << CoreDebug_DEMCR_MON_EN_Pos) /*!< CoreDebug DEMCR: MON_EN Mask */
+
+#define CoreDebug_DEMCR_VC_HARDERR_Pos 10 /*!< CoreDebug DEMCR: VC_HARDERR Position */
+#define CoreDebug_DEMCR_VC_HARDERR_Msk (1UL << CoreDebug_DEMCR_VC_HARDERR_Pos) /*!< CoreDebug DEMCR: VC_HARDERR Mask */
+
+#define CoreDebug_DEMCR_VC_INTERR_Pos 9 /*!< CoreDebug DEMCR: VC_INTERR Position */
+#define CoreDebug_DEMCR_VC_INTERR_Msk (1UL << CoreDebug_DEMCR_VC_INTERR_Pos) /*!< CoreDebug DEMCR: VC_INTERR Mask */
+
+#define CoreDebug_DEMCR_VC_BUSERR_Pos 8 /*!< CoreDebug DEMCR: VC_BUSERR Position */
+#define CoreDebug_DEMCR_VC_BUSERR_Msk (1UL << CoreDebug_DEMCR_VC_BUSERR_Pos) /*!< CoreDebug DEMCR: VC_BUSERR Mask */
+
+#define CoreDebug_DEMCR_VC_STATERR_Pos 7 /*!< CoreDebug DEMCR: VC_STATERR Position */
+#define CoreDebug_DEMCR_VC_STATERR_Msk (1UL << CoreDebug_DEMCR_VC_STATERR_Pos) /*!< CoreDebug DEMCR: VC_STATERR Mask */
+
+#define CoreDebug_DEMCR_VC_CHKERR_Pos 6 /*!< CoreDebug DEMCR: VC_CHKERR Position */
+#define CoreDebug_DEMCR_VC_CHKERR_Msk (1UL << CoreDebug_DEMCR_VC_CHKERR_Pos) /*!< CoreDebug DEMCR: VC_CHKERR Mask */
+
+#define CoreDebug_DEMCR_VC_NOCPERR_Pos 5 /*!< CoreDebug DEMCR: VC_NOCPERR Position */
+#define CoreDebug_DEMCR_VC_NOCPERR_Msk (1UL << CoreDebug_DEMCR_VC_NOCPERR_Pos) /*!< CoreDebug DEMCR: VC_NOCPERR Mask */
+
+#define CoreDebug_DEMCR_VC_MMERR_Pos 4 /*!< CoreDebug DEMCR: VC_MMERR Position */
+#define CoreDebug_DEMCR_VC_MMERR_Msk (1UL << CoreDebug_DEMCR_VC_MMERR_Pos) /*!< CoreDebug DEMCR: VC_MMERR Mask */
+
+#define CoreDebug_DEMCR_VC_CORERESET_Pos 0 /*!< CoreDebug DEMCR: VC_CORERESET Position */
+#define CoreDebug_DEMCR_VC_CORERESET_Msk (1UL << CoreDebug_DEMCR_VC_CORERESET_Pos) /*!< CoreDebug DEMCR: VC_CORERESET Mask */
+
+/*@} end of group CMSIS_CoreDebug */
+
+
+/** \ingroup CMSIS_core_register
+ @{
+ */
+
+/* Memory mapping of Cortex-M4 Hardware */
+#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */
+#define ITM_BASE (0xE0000000UL) /*!< ITM Base Address */
+#define CoreDebug_BASE (0xE000EDF0UL) /*!< Core Debug Base Address */
+#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */
+#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */
+#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */
+
+#define SCnSCB ((SCnSCB_Type *) SCS_BASE ) /*!< System control Register not in SCB */
+#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */
+#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */
+#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */
+#define ITM ((ITM_Type *) ITM_BASE ) /*!< ITM configuration struct */
+#define CoreDebug ((CoreDebug_Type *) CoreDebug_BASE) /*!< Core Debug configuration struct */
+
+#if (__MPU_PRESENT == 1)
+ #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */
+ #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */
+#endif
+
+#if (__FPU_PRESENT == 1)
+ #define FPU_BASE (SCS_BASE + 0x0F30UL) /*!< Floating Point Unit */
+ #define FPU ((FPU_Type *) FPU_BASE ) /*!< Floating Point Unit */
+#endif
+
+/*@} */
+
+
+
+/*******************************************************************************
+ * Hardware Abstraction Layer
+ ******************************************************************************/
+/** \defgroup CMSIS_Core_FunctionInterface CMSIS Core Function Interface
+ Core Function Interface contains:
+ - Core NVIC Functions
+ - Core SysTick Functions
+ - Core Debug Functions
+ - Core Register Access Functions
+*/
+
+
+
+/* ########################## NVIC functions #################################### */
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_NVICFunctions CMSIS Core NVIC Functions
+ @{
+ */
+
+/** \brief Set Priority Grouping
+
+ This function sets the priority grouping field using the required unlock sequence.
+ The parameter PriorityGroup is assigned to the field SCB->AIRCR [10:8] PRIGROUP field.
+ Only values from 0..7 are used.
+ In case of a conflict between priority grouping and available
+ priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set.
+
+ \param [in] PriorityGroup Priority grouping field
+ */
+static __INLINE void NVIC_SetPriorityGrouping(uint32_t PriorityGroup)
+{
+ uint32_t reg_value;
+ uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07); /* only values 0..7 are used */
+
+ reg_value = SCB->AIRCR; /* read old register configuration */
+ reg_value &= ~(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk); /* clear bits to change */
+ reg_value = (reg_value |
+ ((uint32_t)0x5FA << SCB_AIRCR_VECTKEY_Pos) |
+ (PriorityGroupTmp << 8)); /* Insert write key and priorty group */
+ SCB->AIRCR = reg_value;
+}
+
+
+/** \brief Get Priority Grouping
+
+ This function gets the priority grouping from NVIC Interrupt Controller.
+ Priority grouping is SCB->AIRCR [10:8] PRIGROUP field.
+
+ \return Priority grouping field
+ */
+static __INLINE uint32_t NVIC_GetPriorityGrouping(void)
+{
+ return ((SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos); /* read priority grouping field */
+}
+
+
+/** \brief Enable External Interrupt
+
+ This function enables a device specific interrupt in the NVIC interrupt controller.
+ The interrupt number cannot be a negative value.
+
+ \param [in] IRQn Number of the external interrupt to enable
+ */
+static __INLINE void NVIC_EnableIRQ(IRQn_Type IRQn)
+{
+/* NVIC->ISER[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); enable interrupt */
+ NVIC->ISER[(uint32_t)((int32_t)IRQn) >> 5] = (uint32_t)(1 << ((uint32_t)((int32_t)IRQn) & (uint32_t)0x1F)); /* enable interrupt */
+}
+
+
+/** \brief Disable External Interrupt
+
+ This function disables a device specific interrupt in the NVIC interrupt controller.
+ The interrupt number cannot be a negative value.
+
+ \param [in] IRQn Number of the external interrupt to disable
+ */
+static __INLINE void NVIC_DisableIRQ(IRQn_Type IRQn)
+{
+ NVIC->ICER[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* disable interrupt */
+}
+
+
+/** \brief Get Pending Interrupt
+
+ This function reads the pending register in the NVIC and returns the pending bit
+ for the specified interrupt.
+
+ \param [in] IRQn Number of the interrupt for get pending
+ \return 0 Interrupt status is not pending
+ \return 1 Interrupt status is pending
+ */
+static __INLINE uint32_t NVIC_GetPendingIRQ(IRQn_Type IRQn)
+{
+ return((uint32_t) ((NVIC->ISPR[(uint32_t)(IRQn) >> 5] & (1 << ((uint32_t)(IRQn) & 0x1F)))?1:0)); /* Return 1 if pending else 0 */
+}
+
+
+/** \brief Set Pending Interrupt
+
+ This function sets the pending bit for the specified interrupt.
+ The interrupt number cannot be a negative value.
+
+ \param [in] IRQn Number of the interrupt for set pending
+ */
+static __INLINE void NVIC_SetPendingIRQ(IRQn_Type IRQn)
+{
+ NVIC->ISPR[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* set interrupt pending */
+}
+
+
+/** \brief Clear Pending Interrupt
+
+ This function clears the pending bit for the specified interrupt.
+ The interrupt number cannot be a negative value.
+
+ \param [in] IRQn Number of the interrupt for clear pending
+ */
+static __INLINE void NVIC_ClearPendingIRQ(IRQn_Type IRQn)
+{
+ NVIC->ICPR[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* Clear pending interrupt */
+}
+
+
+/** \brief Get Active Interrupt
+
+ This function reads the active register in NVIC and returns the active bit.
+ \param [in] IRQn Number of the interrupt for get active
+ \return 0 Interrupt status is not active
+ \return 1 Interrupt status is active
+ */
+static __INLINE uint32_t NVIC_GetActive(IRQn_Type IRQn)
+{
+ return((uint32_t)((NVIC->IABR[(uint32_t)(IRQn) >> 5] & (1 << ((uint32_t)(IRQn) & 0x1F)))?1:0)); /* Return 1 if active else 0 */
+}
+
+
+/** \brief Set Interrupt Priority
+
+ This function sets the priority for the specified interrupt. The interrupt
+ number can be positive to specify an external (device specific)
+ interrupt, or negative to specify an internal (core) interrupt.
+
+ Note: The priority cannot be set for every core interrupt.
+
+ \param [in] IRQn Number of the interrupt for set priority
+ \param [in] priority Priority to set
+ */
+static __INLINE void NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority)
+{
+ if(IRQn < 0) {
+ SCB->SHP[((uint32_t)(IRQn) & 0xF)-4] = ((priority << (8 - __NVIC_PRIO_BITS)) & 0xff); } /* set Priority for Cortex-M System Interrupts */
+ else {
+ NVIC->IP[(uint32_t)(IRQn)] = ((priority << (8 - __NVIC_PRIO_BITS)) & 0xff); } /* set Priority for device specific Interrupts */
+}
+
+
+/** \brief Get Interrupt Priority
+
+ This function reads the priority for the specified interrupt. The interrupt
+ number can be positive to specify an external (device specific)
+ interrupt, or negative to specify an internal (core) interrupt.
+
+ The returned priority value is automatically aligned to the implemented
+ priority bits of the microcontroller.
+
+ \param [in] IRQn Number of the interrupt for get priority
+ \return Interrupt Priority
+ */
+static __INLINE uint32_t NVIC_GetPriority(IRQn_Type IRQn)
+{
+
+ if(IRQn < 0) {
+ return((uint32_t)(SCB->SHP[((uint32_t)(IRQn) & 0xF)-4] >> (8 - __NVIC_PRIO_BITS))); } /* get priority for Cortex-M system interrupts */
+ else {
+ return((uint32_t)(NVIC->IP[(uint32_t)(IRQn)] >> (8 - __NVIC_PRIO_BITS))); } /* get priority for device specific interrupts */
+}
+
+
+/** \brief Encode Priority
+
+ This function encodes the priority for an interrupt with the given priority group,
+ preemptive priority value and sub priority value.
+ In case of a conflict between priority grouping and available
+ priority bits (__NVIC_PRIO_BITS) the samllest possible priority group is set.
+
+ The returned priority value can be used for NVIC_SetPriority(...) function
+
+ \param [in] PriorityGroup Used priority group
+ \param [in] PreemptPriority Preemptive priority value (starting from 0)
+ \param [in] SubPriority Sub priority value (starting from 0)
+ \return Encoded priority for the interrupt
+ */
+static __INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority)
+{
+ uint32_t PriorityGroupTmp = (PriorityGroup & 0x07); /* only values 0..7 are used */
+ uint32_t PreemptPriorityBits;
+ uint32_t SubPriorityBits;
+
+ PreemptPriorityBits = ((7 - PriorityGroupTmp) > __NVIC_PRIO_BITS) ? __NVIC_PRIO_BITS : 7 - PriorityGroupTmp;
+ SubPriorityBits = ((PriorityGroupTmp + __NVIC_PRIO_BITS) < 7) ? 0 : PriorityGroupTmp - 7 + __NVIC_PRIO_BITS;
+
+ return (
+ ((PreemptPriority & ((1 << (PreemptPriorityBits)) - 1)) << SubPriorityBits) |
+ ((SubPriority & ((1 << (SubPriorityBits )) - 1)))
+ );
+}
+
+
+/** \brief Decode Priority
+
+ This function decodes an interrupt priority value with the given priority group to
+ preemptive priority value and sub priority value.
+ In case of a conflict between priority grouping and available
+ priority bits (__NVIC_PRIO_BITS) the samllest possible priority group is set.
+
+ The priority value can be retrieved with NVIC_GetPriority(...) function
+
+ \param [in] Priority Priority value
+ \param [in] PriorityGroup Used priority group
+ \param [out] pPreemptPriority Preemptive priority value (starting from 0)
+ \param [out] pSubPriority Sub priority value (starting from 0)
+ */
+static __INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* pPreemptPriority, uint32_t* pSubPriority)
+{
+ uint32_t PriorityGroupTmp = (PriorityGroup & 0x07); /* only values 0..7 are used */
+ uint32_t PreemptPriorityBits;
+ uint32_t SubPriorityBits;
+
+ PreemptPriorityBits = ((7 - PriorityGroupTmp) > __NVIC_PRIO_BITS) ? __NVIC_PRIO_BITS : 7 - PriorityGroupTmp;
+ SubPriorityBits = ((PriorityGroupTmp + __NVIC_PRIO_BITS) < 7) ? 0 : PriorityGroupTmp - 7 + __NVIC_PRIO_BITS;
+
+ *pPreemptPriority = (Priority >> SubPriorityBits) & ((1 << (PreemptPriorityBits)) - 1);
+ *pSubPriority = (Priority ) & ((1 << (SubPriorityBits )) - 1);
+}
+
+
+/** \brief System Reset
+
+ This function initiate a system reset request to reset the MCU.
+ */
+static __INLINE void NVIC_SystemReset(void)
+{
+ __DSB(); /* Ensure all outstanding memory accesses included
+ buffered write are completed before reset */
+ SCB->AIRCR = ((0x5FA << SCB_AIRCR_VECTKEY_Pos) |
+ (SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) |
+ SCB_AIRCR_SYSRESETREQ_Msk); /* Keep priority group unchanged */
+ __DSB(); /* Ensure completion of memory access */
+ while(1); /* wait until reset */
+}
+
+/*@} end of CMSIS_Core_NVICFunctions */
+
+
+
+/* ################################## SysTick function ############################################ */
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_SysTickFunctions CMSIS Core SysTick Functions
+ @{
+ */
+
+#if (__Vendor_SysTickConfig == 0)
+
+/** \brief System Tick Configuration
+
+ This function initialises the system tick timer and its interrupt and start the system tick timer.
+ Counter is in free running mode to generate periodical interrupts.
+
+ \param [in] ticks Number of ticks between two interrupts
+ \return 0 Function succeeded
+ \return 1 Function failed
+ */
+static __INLINE uint32_t SysTick_Config(uint32_t ticks)
+{
+ if (ticks > SysTick_LOAD_RELOAD_Msk) return (1); /* Reload value impossible */
+
+ SysTick->LOAD = (ticks & SysTick_LOAD_RELOAD_Msk) - 1; /* set reload register */
+ NVIC_SetPriority (SysTick_IRQn, (1<<__NVIC_PRIO_BITS) - 1); /* set Priority for Cortex-M0 System Interrupts */
+ SysTick->VAL = 0; /* Load the SysTick Counter Value */
+ SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk |
+ SysTick_CTRL_TICKINT_Msk |
+ SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */
+ return (0); /* Function successful */
+}
+
+#endif
+
+/*@} end of CMSIS_Core_SysTickFunctions */
+
+
+
+/* ##################################### Debug In/Output function ########################################### */
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_core_DebugFunctions CMSIS Core Debug Functions
+ @{
+ */
+
+extern volatile int32_t ITM_RxBuffer; /*!< external variable to receive characters */
+#define ITM_RXBUFFER_EMPTY 0x5AA55AA5 /*!< value identifying ITM_RxBuffer is ready for next character */
+
+
+/** \brief ITM Send Character
+
+ This function transmits a character via the ITM channel 0.
+ It just returns when no debugger is connected that has booked the output.
+ It is blocking when a debugger is connected, but the previous character send is not transmitted.
+
+ \param [in] ch Character to transmit
+ \return Character to transmit
+ */
+static __INLINE uint32_t ITM_SendChar (uint32_t ch)
+{
+ if ((CoreDebug->DEMCR & CoreDebug_DEMCR_TRCENA_Msk) && /* Trace enabled */
+ (ITM->TCR & ITM_TCR_ITMENA_Msk) && /* ITM enabled */
+ (ITM->TER & (1UL << 0) ) ) /* ITM Port #0 enabled */
+ {
+ while (ITM->PORT[0].u32 == 0);
+ ITM->PORT[0].u8 = (uint8_t) ch;
+ }
+ return (ch);
+}
+
+
+/** \brief ITM Receive Character
+
+ This function inputs a character via external variable ITM_RxBuffer.
+ It just returns when no debugger is connected that has booked the output.
+ It is blocking when a debugger is connected, but the previous character send is not transmitted.
+
+ \return Received character
+ \return -1 No character received
+ */
+static __INLINE int32_t ITM_ReceiveChar (void) {
+ int32_t ch = -1; /* no character available */
+
+ if (ITM_RxBuffer != ITM_RXBUFFER_EMPTY) {
+ ch = ITM_RxBuffer;
+ ITM_RxBuffer = ITM_RXBUFFER_EMPTY; /* ready for next character */
+ }
+
+ return (ch);
+}
+
+
+/** \brief ITM Check Character
+
+ This function checks external variable ITM_RxBuffer whether a character is available or not.
+ It returns '1' if a character is available and '0' if no character is available.
+
+ \return 0 No character available
+ \return 1 Character available
+ */
+static __INLINE int32_t ITM_CheckChar (void) {
+
+ if (ITM_RxBuffer == ITM_RXBUFFER_EMPTY) {
+ return (0); /* no character available */
+ } else {
+ return (1); /* character available */
+ }
+}
+
+/*@} end of CMSIS_core_DebugFunctions */
+
+#endif /* __CORE_CM4_H_DEPENDANT */
+
+#endif /* __CMSIS_GENERIC */
+
+#ifdef __cplusplus
+}
+#endif
diff --git a/os/ports/common/ARMCMx/CMSIS/include/core_cm4_simd.h b/os/ports/common/ARMCMx/CMSIS/include/core_cm4_simd.h new file mode 100644 index 000000000..479188696 --- /dev/null +++ b/os/ports/common/ARMCMx/CMSIS/include/core_cm4_simd.h @@ -0,0 +1,701 @@ +/**************************************************************************//**
+ * @file core_cm4_simd.h
+ * @brief CMSIS Cortex-M4 SIMD Header File
+ * @version V2.10
+ * @date 19. July 2011
+ *
+ * @note
+ * Copyright (C) 2010-2011 ARM Limited. All rights reserved.
+ *
+ * @par
+ * ARM Limited (ARM) is supplying this software for use with Cortex-M
+ * processor based microcontrollers. This file can be freely distributed
+ * within development tools that are supporting such ARM based processors.
+ *
+ * @par
+ * THIS SOFTWARE IS PROVIDED "AS IS". NO WARRANTIES, WHETHER EXPRESS, IMPLIED
+ * OR STATUTORY, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE.
+ * ARM SHALL NOT, IN ANY CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR
+ * CONSEQUENTIAL DAMAGES, FOR ANY REASON WHATSOEVER.
+ *
+ ******************************************************************************/
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#ifndef __CORE_CM4_SIMD_H
+#define __CORE_CM4_SIMD_H
+
+
+/*******************************************************************************
+ * Hardware Abstraction Layer
+ ******************************************************************************/
+
+
+/* ################### Compiler specific Intrinsics ########################### */
+/** \defgroup CMSIS_SIMD_intrinsics CMSIS SIMD Intrinsics
+ Access to dedicated SIMD instructions
+ @{
+*/
+
+#if defined ( __CC_ARM ) /*------------------RealView Compiler -----------------*/
+/* ARM armcc specific functions */
+
+/*------ CM4 SOMD Intrinsics -----------------------------------------------------*/
+#define __SADD8 __sadd8
+#define __QADD8 __qadd8
+#define __SHADD8 __shadd8
+#define __UADD8 __uadd8
+#define __UQADD8 __uqadd8
+#define __UHADD8 __uhadd8
+#define __SSUB8 __ssub8
+#define __QSUB8 __qsub8
+#define __SHSUB8 __shsub8
+#define __USUB8 __usub8
+#define __UQSUB8 __uqsub8
+#define __UHSUB8 __uhsub8
+#define __SADD16 __sadd16
+#define __QADD16 __qadd16
+#define __SHADD16 __shadd16
+#define __UADD16 __uadd16
+#define __UQADD16 __uqadd16
+#define __UHADD16 __uhadd16
+#define __SSUB16 __ssub16
+#define __QSUB16 __qsub16
+#define __SHSUB16 __shsub16
+#define __USUB16 __usub16
+#define __UQSUB16 __uqsub16
+#define __UHSUB16 __uhsub16
+#define __SASX __sasx
+#define __QASX __qasx
+#define __SHASX __shasx
+#define __UASX __uasx
+#define __UQASX __uqasx
+#define __UHASX __uhasx
+#define __SSAX __ssax
+#define __QSAX __qsax
+#define __SHSAX __shsax
+#define __USAX __usax
+#define __UQSAX __uqsax
+#define __UHSAX __uhsax
+#define __USAD8 __usad8
+#define __USADA8 __usada8
+#define __SSAT16 __ssat16
+#define __USAT16 __usat16
+#define __UXTB16 __uxtb16
+#define __UXTAB16 __uxtab16
+#define __SXTB16 __sxtb16
+#define __SXTAB16 __sxtab16
+#define __SMUAD __smuad
+#define __SMUADX __smuadx
+#define __SMLAD __smlad
+#define __SMLADX __smladx
+#define __SMLALD __smlald
+#define __SMLALDX __smlaldx
+#define __SMUSD __smusd
+#define __SMUSDX __smusdx
+#define __SMLSD __smlsd
+#define __SMLSDX __smlsdx
+#define __SMLSLD __smlsld
+#define __SMLSLDX __smlsldx
+#define __SEL __sel
+#define __QADD __qadd
+#define __QSUB __qsub
+
+#define __PKHBT(ARG1,ARG2,ARG3) ( ((((uint32_t)(ARG1)) ) & 0x0000FFFFUL) | \
+ ((((uint32_t)(ARG2)) << (ARG3)) & 0xFFFF0000UL) )
+
+#define __PKHTB(ARG1,ARG2,ARG3) ( ((((uint32_t)(ARG1)) ) & 0xFFFF0000UL) | \
+ ((((uint32_t)(ARG2)) >> (ARG3)) & 0x0000FFFFUL) )
+
+
+/*-- End CM4 SIMD Intrinsics -----------------------------------------------------*/
+
+
+
+#elif defined ( __ICCARM__ ) /*------------------ ICC Compiler -------------------*/
+/* IAR iccarm specific functions */
+
+#include <cmsis_iar.h>
+
+/*------ CM4 SIMDDSP Intrinsics -----------------------------------------------------*/
+/* intrinsic __SADD8 see intrinsics.h */
+/* intrinsic __QADD8 see intrinsics.h */
+/* intrinsic __SHADD8 see intrinsics.h */
+/* intrinsic __UADD8 see intrinsics.h */
+/* intrinsic __UQADD8 see intrinsics.h */
+/* intrinsic __UHADD8 see intrinsics.h */
+/* intrinsic __SSUB8 see intrinsics.h */
+/* intrinsic __QSUB8 see intrinsics.h */
+/* intrinsic __SHSUB8 see intrinsics.h */
+/* intrinsic __USUB8 see intrinsics.h */
+/* intrinsic __UQSUB8 see intrinsics.h */
+/* intrinsic __UHSUB8 see intrinsics.h */
+/* intrinsic __SADD16 see intrinsics.h */
+/* intrinsic __QADD16 see intrinsics.h */
+/* intrinsic __SHADD16 see intrinsics.h */
+/* intrinsic __UADD16 see intrinsics.h */
+/* intrinsic __UQADD16 see intrinsics.h */
+/* intrinsic __UHADD16 see intrinsics.h */
+/* intrinsic __SSUB16 see intrinsics.h */
+/* intrinsic __QSUB16 see intrinsics.h */
+/* intrinsic __SHSUB16 see intrinsics.h */
+/* intrinsic __USUB16 see intrinsics.h */
+/* intrinsic __UQSUB16 see intrinsics.h */
+/* intrinsic __UHSUB16 see intrinsics.h */
+/* intrinsic __SASX see intrinsics.h */
+/* intrinsic __QASX see intrinsics.h */
+/* intrinsic __SHASX see intrinsics.h */
+/* intrinsic __UASX see intrinsics.h */
+/* intrinsic __UQASX see intrinsics.h */
+/* intrinsic __UHASX see intrinsics.h */
+/* intrinsic __SSAX see intrinsics.h */
+/* intrinsic __QSAX see intrinsics.h */
+/* intrinsic __SHSAX see intrinsics.h */
+/* intrinsic __USAX see intrinsics.h */
+/* intrinsic __UQSAX see intrinsics.h */
+/* intrinsic __UHSAX see intrinsics.h */
+/* intrinsic __USAD8 see intrinsics.h */
+/* intrinsic __USADA8 see intrinsics.h */
+/* intrinsic __SSAT16 see intrinsics.h */
+/* intrinsic __USAT16 see intrinsics.h */
+/* intrinsic __UXTB16 see intrinsics.h */
+/* intrinsic __SXTB16 see intrinsics.h */
+/* intrinsic __UXTAB16 see intrinsics.h */
+/* intrinsic __SXTAB16 see intrinsics.h */
+/* intrinsic __SMUAD see intrinsics.h */
+/* intrinsic __SMUADX see intrinsics.h */
+/* intrinsic __SMLAD see intrinsics.h */
+/* intrinsic __SMLADX see intrinsics.h */
+/* intrinsic __SMLALD see intrinsics.h */
+/* intrinsic __SMLALDX see intrinsics.h */
+/* intrinsic __SMUSD see intrinsics.h */
+/* intrinsic __SMUSDX see intrinsics.h */
+/* intrinsic __SMLSD see intrinsics.h */
+/* intrinsic __SMLSDX see intrinsics.h */
+/* intrinsic __SMLSLD see intrinsics.h */
+/* intrinsic __SMLSLDX see intrinsics.h */
+/* intrinsic __SEL see intrinsics.h */
+/* intrinsic __QADD see intrinsics.h */
+/* intrinsic __QSUB see intrinsics.h */
+/* intrinsic __PKHBT see intrinsics.h */
+/* intrinsic __PKHTB see intrinsics.h */
+
+/*-- End CM4 SIMD Intrinsics -----------------------------------------------------*/
+
+
+
+#elif defined ( __GNUC__ ) /*------------------ GNU Compiler ---------------------*/
+/* GNU gcc specific functions */
+
+/*------ CM4 SIMD Intrinsics -----------------------------------------------------*/
+__attribute__( ( always_inline ) ) static __INLINE uint32_t __SADD8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("sadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) static __INLINE uint32_t __QADD8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("qadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) static __INLINE uint32_t __SHADD8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("shadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) static __INLINE uint32_t __UADD8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) static __INLINE uint32_t __UQADD8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uqadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) static __INLINE uint32_t __UHADD8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uhadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+
+__attribute__( ( always_inline ) ) static __INLINE uint32_t __SSUB8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("ssub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) static __INLINE uint32_t __QSUB8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("qsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) static __INLINE uint32_t __SHSUB8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("shsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) static __INLINE uint32_t __USUB8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("usub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) static __INLINE uint32_t __UQSUB8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uqsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) static __INLINE uint32_t __UHSUB8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uhsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+
+__attribute__( ( always_inline ) ) static __INLINE uint32_t __SADD16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("sadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) static __INLINE uint32_t __QADD16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("qadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) static __INLINE uint32_t __SHADD16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("shadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) static __INLINE uint32_t __UADD16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) static __INLINE uint32_t __UQADD16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uqadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) static __INLINE uint32_t __UHADD16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uhadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) static __INLINE uint32_t __SSUB16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("ssub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) static __INLINE uint32_t __QSUB16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("qsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) static __INLINE uint32_t __SHSUB16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("shsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) static __INLINE uint32_t __USUB16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("usub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) static __INLINE uint32_t __UQSUB16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uqsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) static __INLINE uint32_t __UHSUB16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uhsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) static __INLINE uint32_t __SASX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("sasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) static __INLINE uint32_t __QASX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("qasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) static __INLINE uint32_t __SHASX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("shasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) static __INLINE uint32_t __UASX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) static __INLINE uint32_t __UQASX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uqasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) static __INLINE uint32_t __UHASX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uhasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) static __INLINE uint32_t __SSAX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("ssax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) static __INLINE uint32_t __QSAX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("qsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) static __INLINE uint32_t __SHSAX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("shsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) static __INLINE uint32_t __USAX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("usax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) static __INLINE uint32_t __UQSAX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uqsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) static __INLINE uint32_t __UHSAX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uhsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) static __INLINE uint32_t __USAD8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("usad8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) static __INLINE uint32_t __USADA8(uint32_t op1, uint32_t op2, uint32_t op3)
+{
+ uint32_t result;
+
+ __ASM volatile ("usada8 %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) );
+ return(result);
+}
+
+#define __SSAT16(ARG1,ARG2) \
+({ \
+ uint32_t __RES, __ARG1 = (ARG1); \
+ __ASM ("ssat16 %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) ); \
+ __RES; \
+ })
+
+#define __USAT16(ARG1,ARG2) \
+({ \
+ uint32_t __RES, __ARG1 = (ARG1); \
+ __ASM ("usat16 %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) ); \
+ __RES; \
+ })
+
+__attribute__( ( always_inline ) ) static __INLINE uint32_t __UXTB16(uint32_t op1)
+{
+ uint32_t result;
+
+ __ASM volatile ("uxtb16 %0, %1" : "=r" (result) : "r" (op1));
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) static __INLINE uint32_t __UXTAB16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uxtab16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) static __INLINE uint32_t __SXTB16(uint32_t op1)
+{
+ uint32_t result;
+
+ __ASM volatile ("sxtb16 %0, %1" : "=r" (result) : "r" (op1));
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) static __INLINE uint32_t __SXTAB16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("sxtab16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) static __INLINE uint32_t __SMUAD (uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("smuad %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) static __INLINE uint32_t __SMUADX (uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("smuadx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) static __INLINE uint32_t __SMLAD (uint32_t op1, uint32_t op2, uint32_t op3)
+{
+ uint32_t result;
+
+ __ASM volatile ("smlad %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) static __INLINE uint32_t __SMLADX (uint32_t op1, uint32_t op2, uint32_t op3)
+{
+ uint32_t result;
+
+ __ASM volatile ("smladx %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) );
+ return(result);
+}
+
+#define __SMLALD(ARG1,ARG2,ARG3) \
+({ \
+ uint32_t __ARG1 = (ARG1), __ARG2 = (ARG2), __ARG3_H = (uint32_t)((uint64_t)(ARG3) >> 32), __ARG3_L = (uint32_t)((uint64_t)(ARG3) & 0xFFFFFFFFUL); \
+ __ASM volatile ("smlald %0, %1, %2, %3" : "=r" (__ARG3_L), "=r" (__ARG3_H) : "r" (__ARG1), "r" (__ARG2), "0" (__ARG3_L), "1" (__ARG3_H) ); \
+ (uint64_t)(((uint64_t)__ARG3_H << 32) | __ARG3_L); \
+ })
+
+#define __SMLALDX(ARG1,ARG2,ARG3) \
+({ \
+ uint32_t __ARG1 = (ARG1), __ARG2 = (ARG2), __ARG3_H = (uint32_t)((uint64_t)(ARG3) >> 32), __ARG3_L = (uint32_t)((uint64_t)(ARG3) & 0xFFFFFFFFUL); \
+ __ASM volatile ("smlaldx %0, %1, %2, %3" : "=r" (__ARG3_L), "=r" (__ARG3_H) : "r" (__ARG1), "r" (__ARG2), "0" (__ARG3_L), "1" (__ARG3_H) ); \
+ (uint64_t)(((uint64_t)__ARG3_H << 32) | __ARG3_L); \
+ })
+
+__attribute__( ( always_inline ) ) static __INLINE uint32_t __SMUSD (uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("smusd %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) static __INLINE uint32_t __SMUSDX (uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("smusdx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) static __INLINE uint32_t __SMLSD (uint32_t op1, uint32_t op2, uint32_t op3)
+{
+ uint32_t result;
+
+ __ASM volatile ("smlsd %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) static __INLINE uint32_t __SMLSDX (uint32_t op1, uint32_t op2, uint32_t op3)
+{
+ uint32_t result;
+
+ __ASM volatile ("smlsdx %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) );
+ return(result);
+}
+
+#define __SMLSLD(ARG1,ARG2,ARG3) \
+({ \
+ uint32_t __ARG1 = (ARG1), __ARG2 = (ARG2), __ARG3_H = (uint32_t)((ARG3) >> 32), __ARG3_L = (uint32_t)((ARG3) & 0xFFFFFFFFUL); \
+ __ASM volatile ("smlsld %0, %1, %2, %3" : "=r" (__ARG3_L), "=r" (__ARG3_H) : "r" (__ARG1), "r" (__ARG2), "0" (__ARG3_L), "1" (__ARG3_H) ); \
+ (uint64_t)(((uint64_t)__ARG3_H << 32) | __ARG3_L); \
+ })
+
+#define __SMLSLDX(ARG1,ARG2,ARG3) \
+({ \
+ uint32_t __ARG1 = (ARG1), __ARG2 = (ARG2), __ARG3_H = (uint32_t)((ARG3) >> 32), __ARG3_L = (uint32_t)((ARG3) & 0xFFFFFFFFUL); \
+ __ASM volatile ("smlsldx %0, %1, %2, %3" : "=r" (__ARG3_L), "=r" (__ARG3_H) : "r" (__ARG1), "r" (__ARG2), "0" (__ARG3_L), "1" (__ARG3_H) ); \
+ (uint64_t)(((uint64_t)__ARG3_H << 32) | __ARG3_L); \
+ })
+
+__attribute__( ( always_inline ) ) static __INLINE uint32_t __SEL (uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("sel %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) static __INLINE uint32_t __QADD(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("qadd %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) static __INLINE uint32_t __QSUB(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("qsub %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+#define __PKHBT(ARG1,ARG2,ARG3) \
+({ \
+ uint32_t __RES, __ARG1 = (ARG1), __ARG2 = (ARG2); \
+ __ASM ("pkhbt %0, %1, %2, lsl %3" : "=r" (__RES) : "r" (__ARG1), "r" (__ARG2), "I" (ARG3) ); \
+ __RES; \
+ })
+
+#define __PKHTB(ARG1,ARG2,ARG3) \
+({ \
+ uint32_t __RES, __ARG1 = (ARG1), __ARG2 = (ARG2); \
+ if (ARG3 == 0) \
+ __ASM ("pkhtb %0, %1, %2" : "=r" (__RES) : "r" (__ARG1), "r" (__ARG2) ); \
+ else \
+ __ASM ("pkhtb %0, %1, %2, asr %3" : "=r" (__RES) : "r" (__ARG1), "r" (__ARG2), "I" (ARG3) ); \
+ __RES; \
+ })
+
+/*-- End CM4 SIMD Intrinsics -----------------------------------------------------*/
+
+
+
+#elif defined ( __TASKING__ ) /*------------------ TASKING Compiler --------------*/
+/* TASKING carm specific functions */
+
+
+/*------ CM4 SIMD Intrinsics -----------------------------------------------------*/
+/* not yet supported */
+/*-- End CM4 SIMD Intrinsics -----------------------------------------------------*/
+
+
+#endif
+
+/*@} end of group CMSIS_SIMD_intrinsics */
+
+
+#endif /* __CORE_CM4_SIMD_H */
+
+#ifdef __cplusplus
+}
+#endif
diff --git a/os/ports/common/ARMCMx/CMSIS/include/core_cmFunc.h b/os/ports/common/ARMCMx/CMSIS/include/core_cmFunc.h new file mode 100644 index 000000000..c999b1c83 --- /dev/null +++ b/os/ports/common/ARMCMx/CMSIS/include/core_cmFunc.h @@ -0,0 +1,609 @@ +/**************************************************************************//**
+ * @file core_cmFunc.h
+ * @brief CMSIS Cortex-M Core Function Access Header File
+ * @version V2.10
+ * @date 26. July 2011
+ *
+ * @note
+ * Copyright (C) 2009-2011 ARM Limited. All rights reserved.
+ *
+ * @par
+ * ARM Limited (ARM) is supplying this software for use with Cortex-M
+ * processor based microcontrollers. This file can be freely distributed
+ * within development tools that are supporting such ARM based processors.
+ *
+ * @par
+ * THIS SOFTWARE IS PROVIDED "AS IS". NO WARRANTIES, WHETHER EXPRESS, IMPLIED
+ * OR STATUTORY, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE.
+ * ARM SHALL NOT, IN ANY CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR
+ * CONSEQUENTIAL DAMAGES, FOR ANY REASON WHATSOEVER.
+ *
+ ******************************************************************************/
+
+#ifndef __CORE_CMFUNC_H
+#define __CORE_CMFUNC_H
+
+
+/* ########################### Core Function Access ########################### */
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_RegAccFunctions CMSIS Core Register Access Functions
+ @{
+ */
+
+#if defined ( __CC_ARM ) /*------------------RealView Compiler -----------------*/
+/* ARM armcc specific functions */
+
+#if (__ARMCC_VERSION < 400677)
+ #error "Please use ARM Compiler Toolchain V4.0.677 or later!"
+#endif
+
+/* intrinsic void __enable_irq(); */
+/* intrinsic void __disable_irq(); */
+
+/** \brief Get Control Register
+
+ This function returns the content of the Control Register.
+
+ \return Control Register value
+ */
+static __INLINE uint32_t __get_CONTROL(void)
+{
+ register uint32_t __regControl __ASM("control");
+ return(__regControl);
+}
+
+
+/** \brief Set Control Register
+
+ This function writes the given value to the Control Register.
+
+ \param [in] control Control Register value to set
+ */
+static __INLINE void __set_CONTROL(uint32_t control)
+{
+ register uint32_t __regControl __ASM("control");
+ __regControl = control;
+}
+
+
+/** \brief Get ISPR Register
+
+ This function returns the content of the ISPR Register.
+
+ \return ISPR Register value
+ */
+static __INLINE uint32_t __get_IPSR(void)
+{
+ register uint32_t __regIPSR __ASM("ipsr");
+ return(__regIPSR);
+}
+
+
+/** \brief Get APSR Register
+
+ This function returns the content of the APSR Register.
+
+ \return APSR Register value
+ */
+static __INLINE uint32_t __get_APSR(void)
+{
+ register uint32_t __regAPSR __ASM("apsr");
+ return(__regAPSR);
+}
+
+
+/** \brief Get xPSR Register
+
+ This function returns the content of the xPSR Register.
+
+ \return xPSR Register value
+ */
+static __INLINE uint32_t __get_xPSR(void)
+{
+ register uint32_t __regXPSR __ASM("xpsr");
+ return(__regXPSR);
+}
+
+
+/** \brief Get Process Stack Pointer
+
+ This function returns the current value of the Process Stack Pointer (PSP).
+
+ \return PSP Register value
+ */
+static __INLINE uint32_t __get_PSP(void)
+{
+ register uint32_t __regProcessStackPointer __ASM("psp");
+ return(__regProcessStackPointer);
+}
+
+
+/** \brief Set Process Stack Pointer
+
+ This function assigns the given value to the Process Stack Pointer (PSP).
+
+ \param [in] topOfProcStack Process Stack Pointer value to set
+ */
+static __INLINE void __set_PSP(uint32_t topOfProcStack)
+{
+ register uint32_t __regProcessStackPointer __ASM("psp");
+ __regProcessStackPointer = topOfProcStack;
+}
+
+
+/** \brief Get Main Stack Pointer
+
+ This function returns the current value of the Main Stack Pointer (MSP).
+
+ \return MSP Register value
+ */
+static __INLINE uint32_t __get_MSP(void)
+{
+ register uint32_t __regMainStackPointer __ASM("msp");
+ return(__regMainStackPointer);
+}
+
+
+/** \brief Set Main Stack Pointer
+
+ This function assigns the given value to the Main Stack Pointer (MSP).
+
+ \param [in] topOfMainStack Main Stack Pointer value to set
+ */
+static __INLINE void __set_MSP(uint32_t topOfMainStack)
+{
+ register uint32_t __regMainStackPointer __ASM("msp");
+ __regMainStackPointer = topOfMainStack;
+}
+
+
+/** \brief Get Priority Mask
+
+ This function returns the current state of the priority mask bit from the Priority Mask Register.
+
+ \return Priority Mask value
+ */
+static __INLINE uint32_t __get_PRIMASK(void)
+{
+ register uint32_t __regPriMask __ASM("primask");
+ return(__regPriMask);
+}
+
+
+/** \brief Set Priority Mask
+
+ This function assigns the given value to the Priority Mask Register.
+
+ \param [in] priMask Priority Mask
+ */
+static __INLINE void __set_PRIMASK(uint32_t priMask)
+{
+ register uint32_t __regPriMask __ASM("primask");
+ __regPriMask = (priMask);
+}
+
+
+#if (__CORTEX_M >= 0x03)
+
+/** \brief Enable FIQ
+
+ This function enables FIQ interrupts by clearing the F-bit in the CPSR.
+ Can only be executed in Privileged modes.
+ */
+#define __enable_fault_irq __enable_fiq
+
+
+/** \brief Disable FIQ
+
+ This function disables FIQ interrupts by setting the F-bit in the CPSR.
+ Can only be executed in Privileged modes.
+ */
+#define __disable_fault_irq __disable_fiq
+
+
+/** \brief Get Base Priority
+
+ This function returns the current value of the Base Priority register.
+
+ \return Base Priority register value
+ */
+static __INLINE uint32_t __get_BASEPRI(void)
+{
+ register uint32_t __regBasePri __ASM("basepri");
+ return(__regBasePri);
+}
+
+
+/** \brief Set Base Priority
+
+ This function assigns the given value to the Base Priority register.
+
+ \param [in] basePri Base Priority value to set
+ */
+static __INLINE void __set_BASEPRI(uint32_t basePri)
+{
+ register uint32_t __regBasePri __ASM("basepri");
+ __regBasePri = (basePri & 0xff);
+}
+
+
+/** \brief Get Fault Mask
+
+ This function returns the current value of the Fault Mask register.
+
+ \return Fault Mask register value
+ */
+static __INLINE uint32_t __get_FAULTMASK(void)
+{
+ register uint32_t __regFaultMask __ASM("faultmask");
+ return(__regFaultMask);
+}
+
+
+/** \brief Set Fault Mask
+
+ This function assigns the given value to the Fault Mask register.
+
+ \param [in] faultMask Fault Mask value to set
+ */
+static __INLINE void __set_FAULTMASK(uint32_t faultMask)
+{
+ register uint32_t __regFaultMask __ASM("faultmask");
+ __regFaultMask = (faultMask & (uint32_t)1);
+}
+
+#endif /* (__CORTEX_M >= 0x03) */
+
+
+#if (__CORTEX_M == 0x04)
+
+/** \brief Get FPSCR
+
+ This function returns the current value of the Floating Point Status/Control register.
+
+ \return Floating Point Status/Control register value
+ */
+static __INLINE uint32_t __get_FPSCR(void)
+{
+#if (__FPU_PRESENT == 1) && (__FPU_USED == 1)
+ register uint32_t __regfpscr __ASM("fpscr");
+ return(__regfpscr);
+#else
+ return(0);
+#endif
+}
+
+
+/** \brief Set FPSCR
+
+ This function assigns the given value to the Floating Point Status/Control register.
+
+ \param [in] fpscr Floating Point Status/Control value to set
+ */
+static __INLINE void __set_FPSCR(uint32_t fpscr)
+{
+#if (__FPU_PRESENT == 1) && (__FPU_USED == 1)
+ register uint32_t __regfpscr __ASM("fpscr");
+ __regfpscr = (fpscr);
+#endif
+}
+
+#endif /* (__CORTEX_M == 0x04) */
+
+
+#elif defined ( __ICCARM__ ) /*------------------ ICC Compiler -------------------*/
+/* IAR iccarm specific functions */
+
+#include <cmsis_iar.h>
+
+#elif defined ( __GNUC__ ) /*------------------ GNU Compiler ---------------------*/
+/* GNU gcc specific functions */
+
+/** \brief Enable IRQ Interrupts
+
+ This function enables IRQ interrupts by clearing the I-bit in the CPSR.
+ Can only be executed in Privileged modes.
+ */
+__attribute__( ( always_inline ) ) static __INLINE void __enable_irq(void)
+{
+ __ASM volatile ("cpsie i");
+}
+
+
+/** \brief Disable IRQ Interrupts
+
+ This function disables IRQ interrupts by setting the I-bit in the CPSR.
+ Can only be executed in Privileged modes.
+ */
+__attribute__( ( always_inline ) ) static __INLINE void __disable_irq(void)
+{
+ __ASM volatile ("cpsid i");
+}
+
+
+/** \brief Get Control Register
+
+ This function returns the content of the Control Register.
+
+ \return Control Register value
+ */
+__attribute__( ( always_inline ) ) static __INLINE uint32_t __get_CONTROL(void)
+{
+ uint32_t result;
+
+ __ASM volatile ("MRS %0, control" : "=r" (result) );
+ return(result);
+}
+
+
+/** \brief Set Control Register
+
+ This function writes the given value to the Control Register.
+
+ \param [in] control Control Register value to set
+ */
+__attribute__( ( always_inline ) ) static __INLINE void __set_CONTROL(uint32_t control)
+{
+ __ASM volatile ("MSR control, %0" : : "r" (control) );
+}
+
+
+/** \brief Get ISPR Register
+
+ This function returns the content of the ISPR Register.
+
+ \return ISPR Register value
+ */
+__attribute__( ( always_inline ) ) static __INLINE uint32_t __get_IPSR(void)
+{
+ uint32_t result;
+
+ __ASM volatile ("MRS %0, ipsr" : "=r" (result) );
+ return(result);
+}
+
+
+/** \brief Get APSR Register
+
+ This function returns the content of the APSR Register.
+
+ \return APSR Register value
+ */
+__attribute__( ( always_inline ) ) static __INLINE uint32_t __get_APSR(void)
+{
+ uint32_t result;
+
+ __ASM volatile ("MRS %0, apsr" : "=r" (result) );
+ return(result);
+}
+
+
+/** \brief Get xPSR Register
+
+ This function returns the content of the xPSR Register.
+
+ \return xPSR Register value
+ */
+__attribute__( ( always_inline ) ) static __INLINE uint32_t __get_xPSR(void)
+{
+ uint32_t result;
+
+ __ASM volatile ("MRS %0, xpsr" : "=r" (result) );
+ return(result);
+}
+
+
+/** \brief Get Process Stack Pointer
+
+ This function returns the current value of the Process Stack Pointer (PSP).
+
+ \return PSP Register value
+ */
+__attribute__( ( always_inline ) ) static __INLINE uint32_t __get_PSP(void)
+{
+ register uint32_t result;
+
+ __ASM volatile ("MRS %0, psp\n" : "=r" (result) );
+ return(result);
+}
+
+
+/** \brief Set Process Stack Pointer
+
+ This function assigns the given value to the Process Stack Pointer (PSP).
+
+ \param [in] topOfProcStack Process Stack Pointer value to set
+ */
+__attribute__( ( always_inline ) ) static __INLINE void __set_PSP(uint32_t topOfProcStack)
+{
+ __ASM volatile ("MSR psp, %0\n" : : "r" (topOfProcStack) );
+}
+
+
+/** \brief Get Main Stack Pointer
+
+ This function returns the current value of the Main Stack Pointer (MSP).
+
+ \return MSP Register value
+ */
+__attribute__( ( always_inline ) ) static __INLINE uint32_t __get_MSP(void)
+{
+ register uint32_t result;
+
+ __ASM volatile ("MRS %0, msp\n" : "=r" (result) );
+ return(result);
+}
+
+
+/** \brief Set Main Stack Pointer
+
+ This function assigns the given value to the Main Stack Pointer (MSP).
+
+ \param [in] topOfMainStack Main Stack Pointer value to set
+ */
+__attribute__( ( always_inline ) ) static __INLINE void __set_MSP(uint32_t topOfMainStack)
+{
+ __ASM volatile ("MSR msp, %0\n" : : "r" (topOfMainStack) );
+}
+
+
+/** \brief Get Priority Mask
+
+ This function returns the current state of the priority mask bit from the Priority Mask Register.
+
+ \return Priority Mask value
+ */
+__attribute__( ( always_inline ) ) static __INLINE uint32_t __get_PRIMASK(void)
+{
+ uint32_t result;
+
+ __ASM volatile ("MRS %0, primask" : "=r" (result) );
+ return(result);
+}
+
+
+/** \brief Set Priority Mask
+
+ This function assigns the given value to the Priority Mask Register.
+
+ \param [in] priMask Priority Mask
+ */
+__attribute__( ( always_inline ) ) static __INLINE void __set_PRIMASK(uint32_t priMask)
+{
+ __ASM volatile ("MSR primask, %0" : : "r" (priMask) );
+}
+
+
+#if (__CORTEX_M >= 0x03)
+
+/** \brief Enable FIQ
+
+ This function enables FIQ interrupts by clearing the F-bit in the CPSR.
+ Can only be executed in Privileged modes.
+ */
+__attribute__( ( always_inline ) ) static __INLINE void __enable_fault_irq(void)
+{
+ __ASM volatile ("cpsie f");
+}
+
+
+/** \brief Disable FIQ
+
+ This function disables FIQ interrupts by setting the F-bit in the CPSR.
+ Can only be executed in Privileged modes.
+ */
+__attribute__( ( always_inline ) ) static __INLINE void __disable_fault_irq(void)
+{
+ __ASM volatile ("cpsid f");
+}
+
+
+/** \brief Get Base Priority
+
+ This function returns the current value of the Base Priority register.
+
+ \return Base Priority register value
+ */
+__attribute__( ( always_inline ) ) static __INLINE uint32_t __get_BASEPRI(void)
+{
+ uint32_t result;
+
+ __ASM volatile ("MRS %0, basepri_max" : "=r" (result) );
+ return(result);
+}
+
+
+/** \brief Set Base Priority
+
+ This function assigns the given value to the Base Priority register.
+
+ \param [in] basePri Base Priority value to set
+ */
+__attribute__( ( always_inline ) ) static __INLINE void __set_BASEPRI(uint32_t value)
+{
+ __ASM volatile ("MSR basepri, %0" : : "r" (value) );
+}
+
+
+/** \brief Get Fault Mask
+
+ This function returns the current value of the Fault Mask register.
+
+ \return Fault Mask register value
+ */
+__attribute__( ( always_inline ) ) static __INLINE uint32_t __get_FAULTMASK(void)
+{
+ uint32_t result;
+
+ __ASM volatile ("MRS %0, faultmask" : "=r" (result) );
+ return(result);
+}
+
+
+/** \brief Set Fault Mask
+
+ This function assigns the given value to the Fault Mask register.
+
+ \param [in] faultMask Fault Mask value to set
+ */
+__attribute__( ( always_inline ) ) static __INLINE void __set_FAULTMASK(uint32_t faultMask)
+{
+ __ASM volatile ("MSR faultmask, %0" : : "r" (faultMask) );
+}
+
+#endif /* (__CORTEX_M >= 0x03) */
+
+
+#if (__CORTEX_M == 0x04)
+
+/** \brief Get FPSCR
+
+ This function returns the current value of the Floating Point Status/Control register.
+
+ \return Floating Point Status/Control register value
+ */
+__attribute__( ( always_inline ) ) static __INLINE uint32_t __get_FPSCR(void)
+{
+#if (__FPU_PRESENT == 1) && (__FPU_USED == 1)
+ uint32_t result;
+
+ __ASM volatile ("VMRS %0, fpscr" : "=r" (result) );
+ return(result);
+#else
+ return(0);
+#endif
+}
+
+
+/** \brief Set FPSCR
+
+ This function assigns the given value to the Floating Point Status/Control register.
+
+ \param [in] fpscr Floating Point Status/Control value to set
+ */
+__attribute__( ( always_inline ) ) static __INLINE void __set_FPSCR(uint32_t fpscr)
+{
+#if (__FPU_PRESENT == 1) && (__FPU_USED == 1)
+ __ASM volatile ("VMSR fpscr, %0" : : "r" (fpscr) );
+#endif
+}
+
+#endif /* (__CORTEX_M == 0x04) */
+
+
+#elif defined ( __TASKING__ ) /*------------------ TASKING Compiler --------------*/
+/* TASKING carm specific functions */
+
+/*
+ * The CMSIS functions have been implemented as intrinsics in the compiler.
+ * Please use "carm -?i" to get an up to date list of all instrinsics,
+ * Including the CMSIS ones.
+ */
+
+#endif
+
+/*@} end of CMSIS_Core_RegAccFunctions */
+
+
+#endif /* __CORE_CMFUNC_H */
diff --git a/os/ports/common/ARMCMx/CMSIS/include/core_cmInstr.h b/os/ports/common/ARMCMx/CMSIS/include/core_cmInstr.h new file mode 100644 index 000000000..ceb4f8756 --- /dev/null +++ b/os/ports/common/ARMCMx/CMSIS/include/core_cmInstr.h @@ -0,0 +1,585 @@ +/**************************************************************************//**
+ * @file core_cmInstr.h
+ * @brief CMSIS Cortex-M Core Instruction Access Header File
+ * @version V2.10
+ * @date 19. July 2011
+ *
+ * @note
+ * Copyright (C) 2009-2011 ARM Limited. All rights reserved.
+ *
+ * @par
+ * ARM Limited (ARM) is supplying this software for use with Cortex-M
+ * processor based microcontrollers. This file can be freely distributed
+ * within development tools that are supporting such ARM based processors.
+ *
+ * @par
+ * THIS SOFTWARE IS PROVIDED "AS IS". NO WARRANTIES, WHETHER EXPRESS, IMPLIED
+ * OR STATUTORY, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE.
+ * ARM SHALL NOT, IN ANY CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR
+ * CONSEQUENTIAL DAMAGES, FOR ANY REASON WHATSOEVER.
+ *
+ ******************************************************************************/
+
+#ifndef __CORE_CMINSTR_H
+#define __CORE_CMINSTR_H
+
+
+/* ########################## Core Instruction Access ######################### */
+/** \defgroup CMSIS_Core_InstructionInterface CMSIS Core Instruction Interface
+ Access to dedicated instructions
+ @{
+*/
+
+#if defined ( __CC_ARM ) /*------------------RealView Compiler -----------------*/
+/* ARM armcc specific functions */
+
+#if (__ARMCC_VERSION < 400677)
+ #error "Please use ARM Compiler Toolchain V4.0.677 or later!"
+#endif
+
+
+/** \brief No Operation
+
+ No Operation does nothing. This instruction can be used for code alignment purposes.
+ */
+#define __NOP __nop
+
+
+/** \brief Wait For Interrupt
+
+ Wait For Interrupt is a hint instruction that suspends execution
+ until one of a number of events occurs.
+ */
+#define __WFI __wfi
+
+
+/** \brief Wait For Event
+
+ Wait For Event is a hint instruction that permits the processor to enter
+ a low-power state until one of a number of events occurs.
+ */
+#define __WFE __wfe
+
+
+/** \brief Send Event
+
+ Send Event is a hint instruction. It causes an event to be signaled to the CPU.
+ */
+#define __SEV __sev
+
+
+/** \brief Instruction Synchronization Barrier
+
+ Instruction Synchronization Barrier flushes the pipeline in the processor,
+ so that all instructions following the ISB are fetched from cache or
+ memory, after the instruction has been completed.
+ */
+#define __ISB() __isb(0xF)
+
+
+/** \brief Data Synchronization Barrier
+
+ This function acts as a special kind of Data Memory Barrier.
+ It completes when all explicit memory accesses before this instruction complete.
+ */
+#define __DSB() __dsb(0xF)
+
+
+/** \brief Data Memory Barrier
+
+ This function ensures the apparent order of the explicit memory operations before
+ and after the instruction, without ensuring their completion.
+ */
+#define __DMB() __dmb(0xF)
+
+
+/** \brief Reverse byte order (32 bit)
+
+ This function reverses the byte order in integer value.
+
+ \param [in] value Value to reverse
+ \return Reversed value
+ */
+#define __REV __rev
+
+
+/** \brief Reverse byte order (16 bit)
+
+ This function reverses the byte order in two unsigned short values.
+
+ \param [in] value Value to reverse
+ \return Reversed value
+ */
+static __INLINE __ASM uint32_t __REV16(uint32_t value)
+{
+ rev16 r0, r0
+ bx lr
+}
+
+
+/** \brief Reverse byte order in signed short value
+
+ This function reverses the byte order in a signed short value with sign extension to integer.
+
+ \param [in] value Value to reverse
+ \return Reversed value
+ */
+static __INLINE __ASM int32_t __REVSH(int32_t value)
+{
+ revsh r0, r0
+ bx lr
+}
+
+
+#if (__CORTEX_M >= 0x03)
+
+/** \brief Reverse bit order of value
+
+ This function reverses the bit order of the given value.
+
+ \param [in] value Value to reverse
+ \return Reversed value
+ */
+#define __RBIT __rbit
+
+
+/** \brief LDR Exclusive (8 bit)
+
+ This function performs a exclusive LDR command for 8 bit value.
+
+ \param [in] ptr Pointer to data
+ \return value of type uint8_t at (*ptr)
+ */
+#define __LDREXB(ptr) ((uint8_t ) __ldrex(ptr))
+
+
+/** \brief LDR Exclusive (16 bit)
+
+ This function performs a exclusive LDR command for 16 bit values.
+
+ \param [in] ptr Pointer to data
+ \return value of type uint16_t at (*ptr)
+ */
+#define __LDREXH(ptr) ((uint16_t) __ldrex(ptr))
+
+
+/** \brief LDR Exclusive (32 bit)
+
+ This function performs a exclusive LDR command for 32 bit values.
+
+ \param [in] ptr Pointer to data
+ \return value of type uint32_t at (*ptr)
+ */
+#define __LDREXW(ptr) ((uint32_t ) __ldrex(ptr))
+
+
+/** \brief STR Exclusive (8 bit)
+
+ This function performs a exclusive STR command for 8 bit values.
+
+ \param [in] value Value to store
+ \param [in] ptr Pointer to location
+ \return 0 Function succeeded
+ \return 1 Function failed
+ */
+#define __STREXB(value, ptr) __strex(value, ptr)
+
+
+/** \brief STR Exclusive (16 bit)
+
+ This function performs a exclusive STR command for 16 bit values.
+
+ \param [in] value Value to store
+ \param [in] ptr Pointer to location
+ \return 0 Function succeeded
+ \return 1 Function failed
+ */
+#define __STREXH(value, ptr) __strex(value, ptr)
+
+
+/** \brief STR Exclusive (32 bit)
+
+ This function performs a exclusive STR command for 32 bit values.
+
+ \param [in] value Value to store
+ \param [in] ptr Pointer to location
+ \return 0 Function succeeded
+ \return 1 Function failed
+ */
+#define __STREXW(value, ptr) __strex(value, ptr)
+
+
+/** \brief Remove the exclusive lock
+
+ This function removes the exclusive lock which is created by LDREX.
+
+ */
+#define __CLREX __clrex
+
+
+/** \brief Signed Saturate
+
+ This function saturates a signed value.
+
+ \param [in] value Value to be saturated
+ \param [in] sat Bit position to saturate to (1..32)
+ \return Saturated value
+ */
+#define __SSAT __ssat
+
+
+/** \brief Unsigned Saturate
+
+ This function saturates an unsigned value.
+
+ \param [in] value Value to be saturated
+ \param [in] sat Bit position to saturate to (0..31)
+ \return Saturated value
+ */
+#define __USAT __usat
+
+
+/** \brief Count leading zeros
+
+ This function counts the number of leading zeros of a data value.
+
+ \param [in] value Value to count the leading zeros
+ \return number of leading zeros in value
+ */
+#define __CLZ __clz
+
+#endif /* (__CORTEX_M >= 0x03) */
+
+
+
+#elif defined ( __ICCARM__ ) /*------------------ ICC Compiler -------------------*/
+/* IAR iccarm specific functions */
+
+#include <cmsis_iar.h>
+
+
+#elif defined ( __GNUC__ ) /*------------------ GNU Compiler ---------------------*/
+/* GNU gcc specific functions */
+
+/** \brief No Operation
+
+ No Operation does nothing. This instruction can be used for code alignment purposes.
+ */
+__attribute__( ( always_inline ) ) static __INLINE void __NOP(void)
+{
+ __ASM volatile ("nop");
+}
+
+
+/** \brief Wait For Interrupt
+
+ Wait For Interrupt is a hint instruction that suspends execution
+ until one of a number of events occurs.
+ */
+__attribute__( ( always_inline ) ) static __INLINE void __WFI(void)
+{
+ __ASM volatile ("wfi");
+}
+
+
+/** \brief Wait For Event
+
+ Wait For Event is a hint instruction that permits the processor to enter
+ a low-power state until one of a number of events occurs.
+ */
+__attribute__( ( always_inline ) ) static __INLINE void __WFE(void)
+{
+ __ASM volatile ("wfe");
+}
+
+
+/** \brief Send Event
+
+ Send Event is a hint instruction. It causes an event to be signaled to the CPU.
+ */
+__attribute__( ( always_inline ) ) static __INLINE void __SEV(void)
+{
+ __ASM volatile ("sev");
+}
+
+
+/** \brief Instruction Synchronization Barrier
+
+ Instruction Synchronization Barrier flushes the pipeline in the processor,
+ so that all instructions following the ISB are fetched from cache or
+ memory, after the instruction has been completed.
+ */
+__attribute__( ( always_inline ) ) static __INLINE void __ISB(void)
+{
+ __ASM volatile ("isb");
+}
+
+
+/** \brief Data Synchronization Barrier
+
+ This function acts as a special kind of Data Memory Barrier.
+ It completes when all explicit memory accesses before this instruction complete.
+ */
+__attribute__( ( always_inline ) ) static __INLINE void __DSB(void)
+{
+ __ASM volatile ("dsb");
+}
+
+
+/** \brief Data Memory Barrier
+
+ This function ensures the apparent order of the explicit memory operations before
+ and after the instruction, without ensuring their completion.
+ */
+__attribute__( ( always_inline ) ) static __INLINE void __DMB(void)
+{
+ __ASM volatile ("dmb");
+}
+
+
+/** \brief Reverse byte order (32 bit)
+
+ This function reverses the byte order in integer value.
+
+ \param [in] value Value to reverse
+ \return Reversed value
+ */
+__attribute__( ( always_inline ) ) static __INLINE uint32_t __REV(uint32_t value)
+{
+ uint32_t result;
+
+ __ASM volatile ("rev %0, %1" : "=r" (result) : "r" (value) );
+ return(result);
+}
+
+
+/** \brief Reverse byte order (16 bit)
+
+ This function reverses the byte order in two unsigned short values.
+
+ \param [in] value Value to reverse
+ \return Reversed value
+ */
+__attribute__( ( always_inline ) ) static __INLINE uint32_t __REV16(uint32_t value)
+{
+ uint32_t result;
+
+ __ASM volatile ("rev16 %0, %1" : "=r" (result) : "r" (value) );
+ return(result);
+}
+
+
+/** \brief Reverse byte order in signed short value
+
+ This function reverses the byte order in a signed short value with sign extension to integer.
+
+ \param [in] value Value to reverse
+ \return Reversed value
+ */
+__attribute__( ( always_inline ) ) static __INLINE int32_t __REVSH(int32_t value)
+{
+ uint32_t result;
+
+ __ASM volatile ("revsh %0, %1" : "=r" (result) : "r" (value) );
+ return(result);
+}
+
+
+#if (__CORTEX_M >= 0x03)
+
+/** \brief Reverse bit order of value
+
+ This function reverses the bit order of the given value.
+
+ \param [in] value Value to reverse
+ \return Reversed value
+ */
+__attribute__( ( always_inline ) ) static __INLINE uint32_t __RBIT(uint32_t value)
+{
+ uint32_t result;
+
+ __ASM volatile ("rbit %0, %1" : "=r" (result) : "r" (value) );
+ return(result);
+}
+
+
+/** \brief LDR Exclusive (8 bit)
+
+ This function performs a exclusive LDR command for 8 bit value.
+
+ \param [in] ptr Pointer to data
+ \return value of type uint8_t at (*ptr)
+ */
+__attribute__( ( always_inline ) ) static __INLINE uint8_t __LDREXB(volatile uint8_t *addr)
+{
+ uint8_t result;
+
+ __ASM volatile ("ldrexb %0, [%1]" : "=r" (result) : "r" (addr) );
+ return(result);
+}
+
+
+/** \brief LDR Exclusive (16 bit)
+
+ This function performs a exclusive LDR command for 16 bit values.
+
+ \param [in] ptr Pointer to data
+ \return value of type uint16_t at (*ptr)
+ */
+__attribute__( ( always_inline ) ) static __INLINE uint16_t __LDREXH(volatile uint16_t *addr)
+{
+ uint16_t result;
+
+ __ASM volatile ("ldrexh %0, [%1]" : "=r" (result) : "r" (addr) );
+ return(result);
+}
+
+
+/** \brief LDR Exclusive (32 bit)
+
+ This function performs a exclusive LDR command for 32 bit values.
+
+ \param [in] ptr Pointer to data
+ \return value of type uint32_t at (*ptr)
+ */
+__attribute__( ( always_inline ) ) static __INLINE uint32_t __LDREXW(volatile uint32_t *addr)
+{
+ uint32_t result;
+
+ __ASM volatile ("ldrex %0, [%1]" : "=r" (result) : "r" (addr) );
+ return(result);
+}
+
+
+/** \brief STR Exclusive (8 bit)
+
+ This function performs a exclusive STR command for 8 bit values.
+
+ \param [in] value Value to store
+ \param [in] ptr Pointer to location
+ \return 0 Function succeeded
+ \return 1 Function failed
+ */
+__attribute__( ( always_inline ) ) static __INLINE uint32_t __STREXB(uint8_t value, volatile uint8_t *addr)
+{
+ uint32_t result;
+
+ __ASM volatile ("strexb %0, %2, [%1]" : "=r" (result) : "r" (addr), "r" (value) );
+ return(result);
+}
+
+
+/** \brief STR Exclusive (16 bit)
+
+ This function performs a exclusive STR command for 16 bit values.
+
+ \param [in] value Value to store
+ \param [in] ptr Pointer to location
+ \return 0 Function succeeded
+ \return 1 Function failed
+ */
+__attribute__( ( always_inline ) ) static __INLINE uint32_t __STREXH(uint16_t value, volatile uint16_t *addr)
+{
+ uint32_t result;
+
+ __ASM volatile ("strexh %0, %2, [%1]" : "=r" (result) : "r" (addr), "r" (value) );
+ return(result);
+}
+
+
+/** \brief STR Exclusive (32 bit)
+
+ This function performs a exclusive STR command for 32 bit values.
+
+ \param [in] value Value to store
+ \param [in] ptr Pointer to location
+ \return 0 Function succeeded
+ \return 1 Function failed
+ */
+__attribute__( ( always_inline ) ) static __INLINE uint32_t __STREXW(uint32_t value, volatile uint32_t *addr)
+{
+ uint32_t result;
+
+ __ASM volatile ("strex %0, %2, [%1]" : "=r" (result) : "r" (addr), "r" (value) );
+ return(result);
+}
+
+
+/** \brief Remove the exclusive lock
+
+ This function removes the exclusive lock which is created by LDREX.
+
+ */
+__attribute__( ( always_inline ) ) static __INLINE void __CLREX(void)
+{
+ __ASM volatile ("clrex");
+}
+
+
+/** \brief Signed Saturate
+
+ This function saturates a signed value.
+
+ \param [in] value Value to be saturated
+ \param [in] sat Bit position to saturate to (1..32)
+ \return Saturated value
+ */
+#define __SSAT(ARG1,ARG2) \
+({ \
+ uint32_t __RES, __ARG1 = (ARG1); \
+ __ASM ("ssat %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) ); \
+ __RES; \
+ })
+
+
+/** \brief Unsigned Saturate
+
+ This function saturates an unsigned value.
+
+ \param [in] value Value to be saturated
+ \param [in] sat Bit position to saturate to (0..31)
+ \return Saturated value
+ */
+#define __USAT(ARG1,ARG2) \
+({ \
+ uint32_t __RES, __ARG1 = (ARG1); \
+ __ASM ("usat %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) ); \
+ __RES; \
+ })
+
+
+/** \brief Count leading zeros
+
+ This function counts the number of leading zeros of a data value.
+
+ \param [in] value Value to count the leading zeros
+ \return number of leading zeros in value
+ */
+__attribute__( ( always_inline ) ) static __INLINE uint8_t __CLZ(uint32_t value)
+{
+ uint8_t result;
+
+ __ASM volatile ("clz %0, %1" : "=r" (result) : "r" (value) );
+ return(result);
+}
+
+#endif /* (__CORTEX_M >= 0x03) */
+
+
+
+
+#elif defined ( __TASKING__ ) /*------------------ TASKING Compiler --------------*/
+/* TASKING carm specific functions */
+
+/*
+ * The CMSIS functions have been implemented as intrinsics in the compiler.
+ * Please use "carm -?i" to get an up to date list of all intrinsics,
+ * Including the CMSIS ones.
+ */
+
+#endif
+
+/*@}*/ /* end of group CMSIS_Core_InstructionInterface */
+
+#endif /* __CORE_CMINSTR_H */
diff --git a/os/ports/common/ARMCMx/CMSIS/readme.txt b/os/ports/common/ARMCMx/CMSIS/readme.txt new file mode 100644 index 000000000..6e2172455 --- /dev/null +++ b/os/ports/common/ARMCMx/CMSIS/readme.txt @@ -0,0 +1,6 @@ +CMSIS is Copyright (C) 2011 ARM Limited. All rights reserved.
+
+This directory contains only part of the CMSIS package. If you need the whole
+package please download it from:
+
+http://www.onarm.com
|