diff options
author | gdisirio <gdisirio@35acf78f-673a-0410-8e92-d51de3d6d3f4> | 2013-08-09 08:24:22 +0000 |
---|---|---|
committer | gdisirio <gdisirio@35acf78f-673a-0410-8e92-d51de3d6d3f4> | 2013-08-09 08:24:22 +0000 |
commit | 8ca210a4af9fd039e290cfcc309adde543999c1f (patch) | |
tree | 1aa594d5e65d5ebabdd358acbe8d3a9ac29f2070 /os/hal/platforms/STM32/USARTv2/uart_lld.c | |
parent | cb453a3a12464dd71856b1354d083b5b02260870 (diff) | |
download | ChibiOS-8ca210a4af9fd039e290cfcc309adde543999c1f.tar.gz ChibiOS-8ca210a4af9fd039e290cfcc309adde543999c1f.tar.bz2 ChibiOS-8ca210a4af9fd039e290cfcc309adde543999c1f.zip |
git-svn-id: svn://svn.code.sf.net/p/chibios/svn/branches/kernel_3_dev@6108 35acf78f-673a-0410-8e92-d51de3d6d3f4
Diffstat (limited to 'os/hal/platforms/STM32/USARTv2/uart_lld.c')
-rw-r--r-- | os/hal/platforms/STM32/USARTv2/uart_lld.c | 594 |
1 files changed, 0 insertions, 594 deletions
diff --git a/os/hal/platforms/STM32/USARTv2/uart_lld.c b/os/hal/platforms/STM32/USARTv2/uart_lld.c deleted file mode 100644 index 740c2fd98..000000000 --- a/os/hal/platforms/STM32/USARTv2/uart_lld.c +++ /dev/null @@ -1,594 +0,0 @@ -/*
- ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-
-/**
- * @file STM32/USARTv2/uart_lld.c
- * @brief STM32 low level UART driver code.
- *
- * @addtogroup UART
- * @{
- */
-
-#include "ch.h"
-#include "hal.h"
-
-#if HAL_USE_UART || defined(__DOXYGEN__)
-
-/*===========================================================================*/
-/* Driver local definitions. */
-/*===========================================================================*/
-
-#define USART1_RX_DMA_CHANNEL \
- STM32_DMA_GETCHANNEL(STM32_UART_USART1_RX_DMA_STREAM, \
- STM32_USART1_RX_DMA_CHN)
-
-#define USART1_TX_DMA_CHANNEL \
- STM32_DMA_GETCHANNEL(STM32_UART_USART1_TX_DMA_STREAM, \
- STM32_USART1_TX_DMA_CHN)
-
-#define USART2_RX_DMA_CHANNEL \
- STM32_DMA_GETCHANNEL(STM32_UART_USART2_RX_DMA_STREAM, \
- STM32_USART2_RX_DMA_CHN)
-
-#define USART2_TX_DMA_CHANNEL \
- STM32_DMA_GETCHANNEL(STM32_UART_USART2_TX_DMA_STREAM, \
- STM32_USART2_TX_DMA_CHN)
-
-#define USART3_RX_DMA_CHANNEL \
- STM32_DMA_GETCHANNEL(STM32_UART_USART3_RX_DMA_STREAM, \
- STM32_USART3_RX_DMA_CHN)
-
-#define USART3_TX_DMA_CHANNEL \
- STM32_DMA_GETCHANNEL(STM32_UART_USART3_TX_DMA_STREAM, \
- STM32_USART3_TX_DMA_CHN)
-
-/*===========================================================================*/
-/* Driver exported variables. */
-/*===========================================================================*/
-
-/** @brief USART1 UART driver identifier.*/
-#if STM32_UART_USE_USART1 || defined(__DOXYGEN__)
-UARTDriver UARTD1;
-#endif
-
-/** @brief USART2 UART driver identifier.*/
-#if STM32_UART_USE_USART2 || defined(__DOXYGEN__)
-UARTDriver UARTD2;
-#endif
-
-/** @brief USART3 UART driver identifier.*/
-#if STM32_UART_USE_USART3 || defined(__DOXYGEN__)
-UARTDriver UARTD3;
-#endif
-
-/*===========================================================================*/
-/* Driver local variables and types. */
-/*===========================================================================*/
-
-/*===========================================================================*/
-/* Driver local functions. */
-/*===========================================================================*/
-
-/**
- * @brief Status bits translation.
- *
- * @param[in] sr USART SR register value
- *
- * @return The error flags.
- */
-static uartflags_t translate_errors(uint32_t isr) {
- uartflags_t sts = 0;
-
- if (isr & USART_ISR_ORE)
- sts |= UART_OVERRUN_ERROR;
- if (isr & USART_ISR_PE)
- sts |= UART_PARITY_ERROR;
- if (isr & USART_ISR_FE)
- sts |= UART_FRAMING_ERROR;
- if (isr & USART_ISR_NE)
- sts |= UART_NOISE_ERROR;
- if (isr & USART_ISR_LBD)
- sts |= UART_BREAK_DETECTED;
- return sts;
-}
-
-/**
- * @brief Puts the receiver in the UART_RX_IDLE state.
- *
- * @param[in] uartp pointer to the @p UARTDriver object
- */
-static void set_rx_idle_loop(UARTDriver *uartp) {
- uint32_t mode;
-
- /* RX DMA channel preparation, if the char callback is defined then the
- TCIE interrupt is enabled too.*/
- if (uartp->config->rxchar_cb == NULL)
- mode = STM32_DMA_CR_DIR_P2M | STM32_DMA_CR_CIRC;
- else
- mode = STM32_DMA_CR_DIR_P2M | STM32_DMA_CR_CIRC | STM32_DMA_CR_TCIE;
- dmaStreamSetMemory0(uartp->dmarx, &uartp->rxbuf);
- dmaStreamSetTransactionSize(uartp->dmarx, 1);
- dmaStreamSetMode(uartp->dmarx, uartp->dmamode | mode);
- dmaStreamEnable(uartp->dmarx);
-}
-
-/**
- * @brief USART de-initialization.
- * @details This function must be invoked with interrupts disabled.
- *
- * @param[in] uartp pointer to the @p UARTDriver object
- */
-static void usart_stop(UARTDriver *uartp) {
-
- /* Stops RX and TX DMA channels.*/
- dmaStreamDisable(uartp->dmarx);
- dmaStreamDisable(uartp->dmatx);
-
- /* Stops USART operations.*/
- uartp->usart->CR1 = 0;
- uartp->usart->CR2 = 0;
- uartp->usart->CR3 = 0;
-}
-
-/**
- * @brief USART initialization.
- * @details This function must be invoked with interrupts disabled.
- *
- * @param[in] uartp pointer to the @p UARTDriver object
- */
-static void usart_start(UARTDriver *uartp) {
- uint32_t cr1;
- USART_TypeDef *u = uartp->usart;
-
- /* Defensive programming, starting from a clean state.*/
- usart_stop(uartp);
-
- /* Baud rate setting.*/
-#if defined(STM32F0XX)
- if (uartp->usart == USART1)
- u->BRR = STM32_USART1CLK / uartp->config->speed;
- else
- u->BRR = STM32_PCLK / uartp->config->speed;
-#else /* !defined(STM32F0XX) */
- if (uartp->usart == USART1)
- u->BRR = STM32_PCLK2 / uartp->config->speed;
- else
- u->BRR = STM32_PCLK1 / uartp->config->speed;
-#endif /* !defined(STM32F0XX) */
-
- /* Resetting eventual pending status flags.*/
- u->ICR = 0xFFFFFFFF;
-
- /* Note that some bits are enforced because required for correct driver
- operations.*/
- u->CR2 = uartp->config->cr2 | USART_CR2_LBDIE;
- u->CR3 = uartp->config->cr3 | USART_CR3_DMAT | USART_CR3_DMAR |
- USART_CR3_EIE;
- if (uartp->config->txend2_cb == NULL)
- cr1 = USART_CR1_UE | USART_CR1_PEIE | USART_CR1_TE | USART_CR1_RE;
- else
- cr1 = USART_CR1_UE | USART_CR1_PEIE | USART_CR1_TE | USART_CR1_RE |
- USART_CR1_TCIE;
- u->CR1 = uartp->config->cr1 | cr1;
-
- /* Starting the receiver idle loop.*/
- set_rx_idle_loop(uartp);
-}
-
-/**
- * @brief RX DMA common service routine.
- *
- * @param[in] uartp pointer to the @p UARTDriver object
- * @param[in] flags pre-shifted content of the ISR register
- */
-static void uart_lld_serve_rx_end_irq(UARTDriver *uartp, uint32_t flags) {
-
- /* DMA errors handling.*/
-#if defined(STM32_UART_DMA_ERROR_HOOK)
- if ((flags & (STM32_DMA_ISR_TEIF | STM32_DMA_ISR_DMEIF)) != 0) {
- STM32_UART_DMA_ERROR_HOOK(uartp);
- }
-#else
- (void)flags;
-#endif
-
- if (uartp->rxstate == UART_RX_IDLE) {
- /* Receiver in idle state, a callback is generated, if enabled, for each
- received character and then the driver stays in the same state.*/
- if (uartp->config->rxchar_cb != NULL)
- uartp->config->rxchar_cb(uartp, uartp->rxbuf);
- }
- else {
- /* Receiver in active state, a callback is generated, if enabled, after
- a completed transfer.*/
- dmaStreamDisable(uartp->dmarx);
- uartp->rxstate = UART_RX_COMPLETE;
- if (uartp->config->rxend_cb != NULL)
- uartp->config->rxend_cb(uartp);
-
- /* If the callback didn't explicitly change state then the receiver
- automatically returns to the idle state.*/
- if (uartp->rxstate == UART_RX_COMPLETE) {
- uartp->rxstate = UART_RX_IDLE;
- set_rx_idle_loop(uartp);
- }
- }
-}
-
-/**
- * @brief TX DMA common service routine.
- *
- * @param[in] uartp pointer to the @p UARTDriver object
- * @param[in] flags pre-shifted content of the ISR register
- */
-static void uart_lld_serve_tx_end_irq(UARTDriver *uartp, uint32_t flags) {
-
- /* DMA errors handling.*/
-#if defined(STM32_UART_DMA_ERROR_HOOK)
- if ((flags & (STM32_DMA_ISR_TEIF | STM32_DMA_ISR_DMEIF)) != 0) {
- STM32_UART_DMA_ERROR_HOOK(uartp);
- }
-#else
- (void)flags;
-#endif
-
- dmaStreamDisable(uartp->dmatx);
-
- /* A callback is generated, if enabled, after a completed transfer.*/
- uartp->txstate = UART_TX_COMPLETE;
- if (uartp->config->txend1_cb != NULL)
- uartp->config->txend1_cb(uartp);
-
- /* If the callback didn't explicitly change state then the transmitter
- automatically returns to the idle state.*/
- if (uartp->txstate == UART_TX_COMPLETE)
- uartp->txstate = UART_TX_IDLE;
-}
-
-/**
- * @brief USART common service routine.
- *
- * @param[in] uartp pointer to the @p UARTDriver object
- */
-static void serve_usart_irq(UARTDriver *uartp) {
- uint32_t isr;
- USART_TypeDef *u = uartp->usart;
-
- /* Reading and clearing status.*/
- isr = u->ISR;
- u->ICR = isr;
-
- if (isr & (USART_ISR_LBD | USART_ISR_ORE | USART_ISR_NE |
- USART_ISR_FE | USART_ISR_PE)) {
- if (uartp->config->rxerr_cb != NULL)
- uartp->config->rxerr_cb(uartp, translate_errors(isr));
- }
- if (isr & USART_ISR_TC) {
- /* End of transmission, a callback is generated.*/
- if (uartp->config->txend2_cb != NULL)
- uartp->config->txend2_cb(uartp);
- }
-}
-
-/*===========================================================================*/
-/* Driver interrupt handlers. */
-/*===========================================================================*/
-
-#if STM32_UART_USE_USART1 || defined(__DOXYGEN__)
-#if !defined(STM32_USART1_HANDLER)
-#error "STM32_USART1_HANDLER not defined"
-#endif
-/**
- * @brief USART1 IRQ handler.
- *
- * @isr
- */
-CH_IRQ_HANDLER(STM32_USART1_HANDLER) {
-
- CH_IRQ_PROLOGUE();
-
- serve_usart_irq(&UARTD1);
-
- CH_IRQ_EPILOGUE();
-}
-#endif /* STM32_UART_USE_USART1 */
-
-#if STM32_UART_USE_USART2 || defined(__DOXYGEN__)
-#if !defined(STM32_USART2_HANDLER)
-#error "STM32_USART2_HANDLER not defined"
-#endif
-/**
- * @brief USART2 IRQ handler.
- *
- * @isr
- */
-CH_IRQ_HANDLER(STM32_USART2_HANDLER) {
-
- CH_IRQ_PROLOGUE();
-
- serve_usart_irq(&UARTD2);
-
- CH_IRQ_EPILOGUE();
-}
-#endif /* STM32_UART_USE_USART2 */
-
-#if STM32_UART_USE_USART3 || defined(__DOXYGEN__)
-#if !defined(STM32_USART3_HANDLER)
-#error "STM32_USART3_HANDLER not defined"
-#endif
-/**
- * @brief USART3 IRQ handler.
- *
- * @isr
- */
-CH_IRQ_HANDLER(STM32_USART3_HANDLER) {
-
- CH_IRQ_PROLOGUE();
-
- serve_usart_irq(&UARTD3);
-
- CH_IRQ_EPILOGUE();
-}
-#endif /* STM32_UART_USE_USART3 */
-
-/*===========================================================================*/
-/* Driver exported functions. */
-/*===========================================================================*/
-
-/**
- * @brief Low level UART driver initialization.
- *
- * @notapi
- */
-void uart_lld_init(void) {
-
-#if STM32_UART_USE_USART1
- uartObjectInit(&UARTD1);
- UARTD1.usart = USART1;
- UARTD1.dmamode = STM32_DMA_CR_DMEIE | STM32_DMA_CR_TEIE;
- UARTD1.dmarx = STM32_DMA_STREAM(STM32_UART_USART1_RX_DMA_STREAM);
- UARTD1.dmatx = STM32_DMA_STREAM(STM32_UART_USART1_TX_DMA_STREAM);
-#endif
-
-#if STM32_UART_USE_USART2
- uartObjectInit(&UARTD2);
- UARTD2.usart = USART2;
- UARTD2.dmamode = STM32_DMA_CR_DMEIE | STM32_DMA_CR_TEIE;
- UARTD2.dmarx = STM32_DMA_STREAM(STM32_UART_USART2_RX_DMA_STREAM);
- UARTD2.dmatx = STM32_DMA_STREAM(STM32_UART_USART2_TX_DMA_STREAM);
-#endif
-
-#if STM32_UART_USE_USART3
- uartObjectInit(&UARTD3);
- UARTD3.usart = USART3;
- UARTD3.dmamode = STM32_DMA_CR_DMEIE | STM32_DMA_CR_TEIE;
- UARTD3.dmarx = STM32_DMA_STREAM(STM32_UART_USART3_RX_DMA_STREAM);
- UARTD3.dmatx = STM32_DMA_STREAM(STM32_UART_USART3_TX_DMA_STREAM);
-#endif
-}
-
-/**
- * @brief Configures and activates the UART peripheral.
- *
- * @param[in] uartp pointer to the @p UARTDriver object
- *
- * @notapi
- */
-void uart_lld_start(UARTDriver *uartp) {
-
- if (uartp->state == UART_STOP) {
-#if STM32_UART_USE_USART1
- if (&UARTD1 == uartp) {
- bool_t b;
- b = dmaStreamAllocate(uartp->dmarx,
- STM32_UART_USART1_IRQ_PRIORITY,
- (stm32_dmaisr_t)uart_lld_serve_rx_end_irq,
- (void *)uartp);
- chDbgAssert(!b, "uart_lld_start(), #1", "stream already allocated");
- b = dmaStreamAllocate(uartp->dmatx,
- STM32_UART_USART1_IRQ_PRIORITY,
- (stm32_dmaisr_t)uart_lld_serve_tx_end_irq,
- (void *)uartp);
- chDbgAssert(!b, "uart_lld_start(), #2", "stream already allocated");
- rccEnableUSART1(FALSE);
- nvicEnableVector(STM32_USART1_NUMBER,
- CORTEX_PRIORITY_MASK(STM32_UART_USART1_IRQ_PRIORITY));
- uartp->dmamode |= STM32_DMA_CR_CHSEL(USART1_RX_DMA_CHANNEL) |
- STM32_DMA_CR_PL(STM32_UART_USART1_DMA_PRIORITY);
- }
-#endif
-
-#if STM32_UART_USE_USART2
- if (&UARTD2 == uartp) {
- bool_t b;
- b = dmaStreamAllocate(uartp->dmarx,
- STM32_UART_USART2_IRQ_PRIORITY,
- (stm32_dmaisr_t)uart_lld_serve_rx_end_irq,
- (void *)uartp);
- chDbgAssert(!b, "uart_lld_start(), #3", "stream already allocated");
- b = dmaStreamAllocate(uartp->dmatx,
- STM32_UART_USART2_IRQ_PRIORITY,
- (stm32_dmaisr_t)uart_lld_serve_tx_end_irq,
- (void *)uartp);
- chDbgAssert(!b, "uart_lld_start(), #4", "stream already allocated");
- rccEnableUSART2(FALSE);
- nvicEnableVector(STM32_USART2_NUMBER,
- CORTEX_PRIORITY_MASK(STM32_UART_USART2_IRQ_PRIORITY));
- uartp->dmamode |= STM32_DMA_CR_CHSEL(USART2_RX_DMA_CHANNEL) |
- STM32_DMA_CR_PL(STM32_UART_USART2_DMA_PRIORITY);
- }
-#endif
-
-#if STM32_UART_USE_USART3
- if (&UARTD3 == uartp) {
- bool_t b;
- b = dmaStreamAllocate(uartp->dmarx,
- STM32_UART_USART3_IRQ_PRIORITY,
- (stm32_dmaisr_t)uart_lld_serve_rx_end_irq,
- (void *)uartp);
- chDbgAssert(!b, "uart_lld_start(), #5", "stream already allocated");
- b = dmaStreamAllocate(uartp->dmatx,
- STM32_UART_USART3_IRQ_PRIORITY,
- (stm32_dmaisr_t)uart_lld_serve_tx_end_irq,
- (void *)uartp);
- chDbgAssert(!b, "uart_lld_start(), #6", "stream already allocated");
- rccEnableUSART3(FALSE);
- nvicEnableVector(STM32_USART3_NUMBER,
- CORTEX_PRIORITY_MASK(STM32_UART_USART3_IRQ_PRIORITY));
- uartp->dmamode |= STM32_DMA_CR_CHSEL(USART3_RX_DMA_CHANNEL) |
- STM32_DMA_CR_PL(STM32_UART_USART3_DMA_PRIORITY);
- }
-#endif
-
- /* Static DMA setup, the transfer size depends on the USART settings,
- it is 16 bits if M=1 and PCE=0 else it is 8 bits.*/
- if ((uartp->config->cr1 & (USART_CR1_M | USART_CR1_PCE)) == USART_CR1_M)
- uartp->dmamode |= STM32_DMA_CR_PSIZE_HWORD | STM32_DMA_CR_MSIZE_HWORD;
- dmaStreamSetPeripheral(uartp->dmarx, &uartp->usart->RDR);
- dmaStreamSetPeripheral(uartp->dmatx, &uartp->usart->TDR);
- uartp->rxbuf = 0;
- }
-
- uartp->rxstate = UART_RX_IDLE;
- uartp->txstate = UART_TX_IDLE;
- usart_start(uartp);
-}
-
-/**
- * @brief Deactivates the UART peripheral.
- *
- * @param[in] uartp pointer to the @p UARTDriver object
- *
- * @notapi
- */
-void uart_lld_stop(UARTDriver *uartp) {
-
- if (uartp->state == UART_READY) {
- usart_stop(uartp);
- dmaStreamRelease(uartp->dmarx);
- dmaStreamRelease(uartp->dmatx);
-
-#if STM32_UART_USE_USART1
- if (&UARTD1 == uartp) {
- nvicDisableVector(STM32_USART1_NUMBER);
- rccDisableUSART1(FALSE);
- return;
- }
-#endif
-
-#if STM32_UART_USE_USART2
- if (&UARTD2 == uartp) {
- nvicDisableVector(STM32_USART2_NUMBER);
- rccDisableUSART2(FALSE);
- return;
- }
-#endif
-
-#if STM32_UART_USE_USART3
- if (&UARTD3 == uartp) {
- nvicDisableVector(STM32_USART3_NUMBER);
- rccDisableUSART3(FALSE);
- return;
- }
-#endif
- }
-}
-
-/**
- * @brief Starts a transmission on the UART peripheral.
- * @note The buffers are organized as uint8_t arrays for data sizes below
- * or equal to 8 bits else it is organized as uint16_t arrays.
- *
- * @param[in] uartp pointer to the @p UARTDriver object
- * @param[in] n number of data frames to send
- * @param[in] txbuf the pointer to the transmit buffer
- *
- * @notapi
- */
-void uart_lld_start_send(UARTDriver *uartp, size_t n, const void *txbuf) {
-
- /* TX DMA channel preparation and start.*/
- dmaStreamSetMemory0(uartp->dmatx, txbuf);
- dmaStreamSetTransactionSize(uartp->dmatx, n);
- dmaStreamSetMode(uartp->dmatx, uartp->dmamode | STM32_DMA_CR_DIR_M2P |
- STM32_DMA_CR_MINC | STM32_DMA_CR_TCIE);
- dmaStreamEnable(uartp->dmatx);
-}
-
-/**
- * @brief Stops any ongoing transmission.
- * @note Stopping a transmission also suppresses the transmission callbacks.
- *
- * @param[in] uartp pointer to the @p UARTDriver object
- *
- * @return The number of data frames not transmitted by the
- * stopped transmit operation.
- *
- * @notapi
- */
-size_t uart_lld_stop_send(UARTDriver *uartp) {
-
- dmaStreamDisable(uartp->dmatx);
- return dmaStreamGetTransactionSize(uartp->dmatx);
-}
-
-/**
- * @brief Starts a receive operation on the UART peripheral.
- * @note The buffers are organized as uint8_t arrays for data sizes below
- * or equal to 8 bits else it is organized as uint16_t arrays.
- *
- * @param[in] uartp pointer to the @p UARTDriver object
- * @param[in] n number of data frames to send
- * @param[out] rxbuf the pointer to the receive buffer
- *
- * @notapi
- */
-void uart_lld_start_receive(UARTDriver *uartp, size_t n, void *rxbuf) {
-
- /* Stopping previous activity (idle state).*/
- dmaStreamDisable(uartp->dmarx);
-
- /* RX DMA channel preparation and start.*/
- dmaStreamSetMemory0(uartp->dmarx, rxbuf);
- dmaStreamSetTransactionSize(uartp->dmarx, n);
- dmaStreamSetMode(uartp->dmarx, uartp->dmamode | STM32_DMA_CR_DIR_P2M |
- STM32_DMA_CR_MINC | STM32_DMA_CR_TCIE);
- dmaStreamEnable(uartp->dmarx);
-}
-
-/**
- * @brief Stops any ongoing receive operation.
- * @note Stopping a receive operation also suppresses the receive callbacks.
- *
- * @param[in] uartp pointer to the @p UARTDriver object
- *
- * @return The number of data frames not received by the
- * stopped receive operation.
- *
- * @notapi
- */
-size_t uart_lld_stop_receive(UARTDriver *uartp) {
- size_t n;
-
- dmaStreamDisable(uartp->dmarx);
- n = dmaStreamGetTransactionSize(uartp->dmarx);
- set_rx_idle_loop(uartp);
- return n;
-}
-
-#endif /* HAL_USE_UART */
-
-/** @} */
|