/* ChibiOS/RT - Copyright (C) 2014 Uladzimir Pylinsky aka barthess Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. You may obtain a copy of the License at http://www.apache.org/licenses/LICENSE-2.0 Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License. */ /*===========================================================================*/ /* Main ideas: */ /*=========================================================================== 1) switch PWM output pin it opendrain mode. 2) start 2 channels simultaneously. First (master channel) generates pulses (read time slots) second (sample channel) generates interrupts from where read pin function calls. - ---------------------------------------------- master channel | / ---- - ------------------------------------ sample channel | | ------------------ ^ read interrupt here For data write it is only master channel needed. Data bit width updates on every timer overflow event. */ /*===========================================================================*/ /* General recommendations for strong pull usage */ /*=========================================================================== * * * 1) Use separate power rail instead of strong pull up whenever possible. * Driver's strong pull up feature is very interrupt jitter sensible. * 2) Use special 1-wire bus master (DS2484 for example) if you are * forced to handle bus requiring strong pull up feature. */ /** * @file onewire.c * @brief 1-wire Driver code. * * @addtogroup onewire * @{ */ #include "hal.h" #if HAL_USE_ONEWIRE || defined(__DOXYGEN__) #include /*===========================================================================*/ /* Driver local definitions. */ /*===========================================================================*/ /** * @brief Pulse width constants. * @details Inspired by Microchip's AN1199 * "1-Wire® Communication with PIC® Microcontroller" */ #define ONEWIRE_ZERO_WIDTH 60 #define ONEWIRE_ONE_WIDTH 6 #define ONEWIRE_SAMPLE_WIDTH 15 #define ONEWIRE_RECOVERY_WIDTH 10 #define ONEWIRE_RESET_LOW_WIDTH 480 #define ONEWIRE_RESET_SAMPLE_WIDTH 550 #define ONEWIRE_RESET_TOTAL_WIDTH 960 /** * @brief Forward declarations. */ static void ow_reset_cb(PWMDriver *pwmp, onewireDriver *owp); static void pwm_reset_cb(PWMDriver *pwmp); static void ow_read_bit_cb(PWMDriver *pwmp, onewireDriver *owp); static void pwm_read_bit_cb(PWMDriver *pwmp); static void ow_write_bit_cb(PWMDriver *pwmp, onewireDriver *owp); static void pwm_write_bit_cb(PWMDriver *pwmp); static void ow_search_rom_cb(PWMDriver *pwmp, onewireDriver *owp); static void pwm_search_rom_cb(PWMDriver *pwmp); /*===========================================================================*/ /* Driver exported variables. */ /*===========================================================================*/ /** * @brief 1-wire driver identifier. */ onewireDriver OWD1; /*===========================================================================*/ /* Driver local variables and types. */ /*===========================================================================*/ /** * @brief Config for fast intialization of all fields */ static const PWMConfig pwm_default_cfg = { 1000000, ONEWIRE_RESET_TOTAL_WIDTH, NULL, { {PWM_OUTPUT_DISABLED, NULL}, {PWM_OUTPUT_DISABLED, NULL}, {PWM_OUTPUT_DISABLED, NULL}, {PWM_OUTPUT_DISABLED, NULL} }, 0, 0 }; /** * @brief Look up table for fast 1-wire CRC calculation */ static const uint8_t onewire_crc_table[256] = { 0x0, 0x5e, 0xbc, 0xe2, 0x61, 0x3f, 0xdd, 0x83, 0xc2, 0x9c, 0x7e, 0x20, 0xa3, 0xfd, 0x1f, 0x41, 0x9d, 0xc3, 0x21, 0x7f, 0xfc, 0xa2, 0x40, 0x1e, 0x5f, 0x1, 0xe3, 0xbd, 0x3e, 0x60, 0x82, 0xdc, 0x23, 0x7d, 0x9f, 0xc1, 0x42, 0x1c, 0xfe, 0xa0, 0xe1, 0xbf, 0x5d, 0x3, 0x80, 0xde, 0x3c, 0x62, 0xbe, 0xe0, 0x2, 0x5c, 0xdf, 0x81, 0x63, 0x3d, 0x7c, 0x22, 0xc0, 0x9e, 0x1d, 0x43, 0xa1, 0xff, 0x46, 0x18, 0xfa, 0xa4, 0x27, 0x79, 0x9b, 0xc5, 0x84, 0xda, 0x38, 0x66, 0xe5, 0xbb, 0x59, 0x7, 0xdb, 0x85, 0x67, 0x39, 0xba, 0xe4, 0x6, 0x58, 0x19, 0x47, 0xa5, 0xfb, 0x78, 0x26, 0xc4, 0x9a, 0x65, 0x3b, 0xd9, 0x87, 0x4, 0x5a, 0xb8, 0xe6, 0xa7, 0xf9, 0x1b, 0x45, 0xc6, 0x98, 0x7a, 0x24, 0xf8, 0xa6, 0x44, 0x1a, 0x99, 0xc7, 0x25, 0x7b, 0x3a, 0x64, 0x86, 0xd8, 0x5b, 0x5, 0xe7, 0xb9, 0x8c, 0xd2, 0x30, 0x6e, 0xed, 0xb3, 0x51, 0xf, 0x4e, 0x10, 0xf2, 0xac, 0x2f, 0x71, 0x93, 0xcd, 0x11, 0x4f, 0xad, 0xf3, 0x70, 0x2e, 0xcc, 0x92, 0xd3, 0x8d, 0x6f, 0x31, 0xb2, 0xec, 0xe, 0x50, 0xaf, 0xf1, 0x13, 0x4d, 0xce, 0x90, 0x72, 0x2c, 0x6d, 0x33, 0xd1, 0x8f, 0xc, 0x52, 0xb0, 0xee, 0x32, 0x6c, 0x8e, 0xd0, 0x53, 0xd, 0xef, 0xb1, 0xf0, 0xae, 0x4c, 0x12, 0x91, 0xcf, 0x2d, 0x73, 0xca, 0x94, 0x76, 0x28, 0xab, 0xf5, 0x17, 0x49, 0x8, 0x56, 0xb4, 0xea, 0x69, 0x37, 0xd5, 0x8b, 0x57, 0x9, 0xeb, 0xb5, 0x36, 0x68, 0x8a, 0xd4, 0x95, 0xcb, 0x29, 0x77, 0xf4, 0xaa, 0x48, 0x16, 0xe9, 0xb7, 0x55, 0xb, 0x88, 0xd6, 0x34, 0x6a, 0x2b, 0x75, 0x97, 0xc9, 0x4a, 0x14, 0xf6, 0xa8, 0x74, 0x2a, 0xc8, 0x96, 0x15, 0x4b, 0xa9, 0xf7, 0xb6, 0xe8, 0xa, 0x54, 0xd7, 0x89, 0x6b, 0x35 }; /** * @brief Measurement unit for driver profiling. */ static time_measurement_t search_rom_tm; /*===========================================================================*/ /* Driver local functions. */ /*===========================================================================*/ /** * @brief PWM adapter */ static void pwm_reset_cb(PWMDriver *pwmp) { ow_reset_cb(pwmp, &OWD1); } /** * @brief PWM adapter */ static void pwm_read_bit_cb(PWMDriver *pwmp) { ow_read_bit_cb(pwmp, &OWD1); } /** * @brief PWM adapter */ static void pwm_write_bit_cb(PWMDriver *pwmp) { ow_write_bit_cb(pwmp, &OWD1); } /** * @brief PWM adapter */ static void pwm_search_rom_cb(PWMDriver *pwmp) { ow_search_rom_cb(pwmp, &OWD1); } /** * @brief Write bit routine. * @details Switch PWM channel to 'width' or 'narrow' pulse depending * on value of bit need to be transmitted. * * @param[in] owp pointer to the @p onewireDriver object * @param[in] bit value to be written * * @notapi */ static void ow_write_bit_I(onewireDriver *owp, uint_fast8_t bit) { #if ONEWIRE_SYNTH_SEARCH_TEST _synth_ow_write_bit(owp, bit); #else osalSysLockFromISR(); if (0 == bit) { pwmEnableChannelI(owp->config->pwmd, owp->config->master_channel, ONEWIRE_ZERO_WIDTH); } else { pwmEnableChannelI(owp->config->pwmd, owp->config->master_channel, ONEWIRE_ONE_WIDTH); } osalSysUnlockFromISR(); #endif } /** * @brief 1-wire reset pulse callback. * @note Must be called from PWM's ISR. * * @param[in] pwmp pointer to the @p PWMDriver object * @param[in] owp pointer to the @p onewireDriver object * * @notapi */ static void ow_reset_cb(PWMDriver *pwmp, onewireDriver *owp) { owp->reg.slave_present = (PAL_LOW == owp->config->readBitX()); osalSysLockFromISR(); pwmDisableChannelI(pwmp, owp->config->sample_channel); osalThreadResumeI(&owp->thread, MSG_OK); osalSysUnlockFromISR(); } /** * @brief 1-wire read bit callback. * @note Must be called from PWM's ISR. * * @param[in] pwmp pointer to the @p PWMDriver object * @param[in] owp pointer to the @p onewireDriver object * * @notapi */ static void ow_read_bit_cb(PWMDriver *pwmp, onewireDriver *owp) { if (true == owp->reg.final_timeslot) { osalSysLockFromISR(); pwmDisableChannelI(pwmp, owp->config->sample_channel); osalThreadResumeI(&owp->thread, MSG_OK); osalSysUnlockFromISR(); return; } else { *owp->buf |= owp->config->readBitX() << owp->reg.bit; owp->reg.bit++; if (8 == owp->reg.bit) { owp->reg.bit = 0; owp->buf++; owp->reg.bytes--; if (0 == owp->reg.bytes) { owp->reg.final_timeslot = true; osalSysLockFromISR(); /* Only master channel must be stopped here. Sample channel will be stopped in next ISR call. It is still needed to generate final interrupt. */ pwmDisableChannelI(pwmp, owp->config->master_channel); osalSysUnlockFromISR(); } } } } /** * @brief 1-wire bit transmission callback. * @note Must be called from PWM's ISR. * * @param[in] pwmp pointer to the @p PWMDriver object * @param[in] owp pointer to the @p onewireDriver object * * @notapi */ static void ow_write_bit_cb(PWMDriver *pwmp, onewireDriver *owp) { if (8 == owp->reg.bit) { owp->buf++; owp->reg.bit = 0; owp->reg.bytes--; if (0 == owp->reg.bytes) { osalSysLockFromISR(); pwmDisableChannelI(pwmp, owp->config->master_channel); osalSysUnlockFromISR(); /* used to prevent premature timer stop from userspace */ owp->reg.final_timeslot = true; return; } } /* wait until timer generate last pulse */ if (true == owp->reg.final_timeslot) { #if ONEWIRE_USE_STRONG_PULLUP if (owp->reg.need_pullup) { owp->reg.state = ONEWIRE_PULL_UP; owp->config->pullup_assert(); owp->reg.need_pullup = false; } #endif osalSysLockFromISR(); osalThreadResumeI(&owp->thread, MSG_OK); osalSysUnlockFromISR(); return; } ow_write_bit_I(owp, (*owp->buf >> owp->reg.bit) & 1); owp->reg.bit++; } /** * @brief Helper function for collision handler * * @param[in] sr pointer to the @p onewire_search_rom_t helper structure * @param[in] bit discovered bit to be stored in helper structure */ static void store_bit(onewire_search_rom_t *sr, uint_fast8_t bit) { size_t rb = sr->reg.rombit; /* / 8 % 8 */ sr->retbuf[rb >> 3] |= bit << (rb & 7); sr->reg.rombit++; } /** * @brief Helper function for collision handler * @details Extract bit from previous search path. * * @param[in] path pointer to the array with previous path stored in * 'search ROM' helper structure * @param[in] bit number of bit [0..63] */ static uint_fast8_t extract_path_bit(const uint8_t *path, uint_fast8_t bit) { /* / 8 % 8 */ return (path[bit >> 3] >> (bit & 7)) & 1; } /** * @brief Collision handler for 'search ROM' procedure. * @details You can find algorithm details in APPNOTE 187 * "1-Wire Search Algorithm" from Maxim * * @param[in,out] sr pointer to the @p onewire_search_rom_t helper structure */ static uint_fast8_t collision_handler(onewire_search_rom_t *sr) { uint_fast8_t bit; switch(sr->reg.search_iter) { case ONEWIRE_SEARCH_ROM_NEXT: if ((int)sr->reg.rombit < sr->last_zero_branch) { bit = extract_path_bit(sr->prev_path, sr->reg.rombit); if (0 == bit) { sr->prev_zero_branch = sr->reg.rombit; sr->reg.result = ONEWIRE_SEARCH_ROM_SUCCESS; } store_bit(sr, bit); return bit; } else if ((int)sr->reg.rombit == sr->last_zero_branch) { sr->last_zero_branch = sr->prev_zero_branch; store_bit(sr, 1); return 1; } else { /* found next branch some levels deeper */ sr->prev_zero_branch = sr->last_zero_branch; sr->last_zero_branch = sr->reg.rombit; store_bit(sr, 0); sr->reg.result = ONEWIRE_SEARCH_ROM_SUCCESS; return 0; } break; case ONEWIRE_SEARCH_ROM_FIRST: /* always take 0-branch */ sr->prev_zero_branch = sr->last_zero_branch; sr->last_zero_branch = sr->reg.rombit; store_bit(sr, 0); sr->reg.result = ONEWIRE_SEARCH_ROM_SUCCESS; return 0; break; default: osalSysHalt("Unhandled case"); return 0; /* warning supressor */ break; } } /** * @brief 1-wire search ROM callback. * @note Must be called from PWM's ISR. * * @param[in] pwmp pointer to the @p PWMDriver object * @param[in] owp pointer to the @p onewireDriver object * * @notapi */ static void ow_search_rom_cb(PWMDriver *pwmp, onewireDriver *owp) { chTMStartMeasurementX(&search_rom_tm); onewire_search_rom_t *sr = &owp->search_rom; if (0 == sr->reg.bit_step) { /* read direct bit */ sr->reg.bit_buf |= owp->config->readBitX(); sr->reg.bit_step++; } else if (1 == sr->reg.bit_step) { /* read complement bit */ sr->reg.bit_buf |= owp->config->readBitX() << 1; sr->reg.bit_step++; switch(sr->reg.bit_buf){ case 0b11: /* no one device on bus or any other fail happened */ sr->reg.result = ONEWIRE_SEARCH_ROM_ERROR; goto THE_END; break; case 0b01: /* all slaves have 1 in this position */ store_bit(sr, 1); ow_write_bit_I(owp, 1); break; case 0b10: /* all slaves have 0 in this position */ store_bit(sr, 0); ow_write_bit_I(owp, 0); break; case 0b00: /* collision */ sr->reg.single_device = false; ow_write_bit_I(owp, collision_handler(sr)); break; } } else { /* start next step */ #if !ONEWIRE_SYNTH_SEARCH_TEST ow_write_bit_I(owp, 1); #endif sr->reg.bit_step = 0; sr->reg.bit_buf = 0; } /* one ROM successfully discovered */ if (64 == sr->reg.rombit) { sr->reg.devices_found++; sr->reg.search_iter = ONEWIRE_SEARCH_ROM_NEXT; if (true == sr->reg.single_device) sr->reg.result = ONEWIRE_SEARCH_ROM_LAST; goto THE_END; } /* next search bit iteration */ chTMStopMeasurementX(&search_rom_tm); return; THE_END: #if ONEWIRE_SYNTH_SEARCH_TEST (void)pwmp; return; #else chTMStopMeasurementX(&search_rom_tm); osalSysLockFromISR(); pwmDisableChannelI(pwmp, owp->config->master_channel); pwmDisableChannelI(pwmp, owp->config->sample_channel); osalThreadResumeI(&(owp)->thread, MSG_OK); osalSysUnlockFromISR(); #endif } /** * @brief Helper function. Initialize structures required by 'search ROM'. * @details Early reset. Call it once before 'search ROM' routine. * * @param[in] sr pointer to the @p onewire_search_rom_t helper structure */ static void search_clean_start(onewire_search_rom_t *sr) { sr->reg.single_device = true; /* presume simplest way at beginning */ sr->reg.result = ONEWIRE_SEARCH_ROM_LAST; sr->reg.search_iter = ONEWIRE_SEARCH_ROM_FIRST; sr->retbuf = NULL; sr->reg.devices_found = 0; memset(sr->prev_path, 0, 8); sr->reg.rombit = 0; sr->reg.bit_step = 0; sr->reg.bit_buf = 0; sr->last_zero_branch = -1; sr->prev_zero_branch = -1; } /** * @brief Helper function. Prepare structures required by 'search ROM'. * * @param[in] sr pointer to the @p onewire_search_rom_t helper structure */ static void search_clean_iteration(onewire_search_rom_t *sr) { sr->reg.rombit = 0; sr->reg.bit_step = 0; sr->reg.bit_buf = 0; sr->reg.result = ONEWIRE_SEARCH_ROM_LAST; } /*===========================================================================*/ /* Driver exported functions. */ /*===========================================================================*/ /** * @brief Calculates 1-wire CRC. * * @param[in] buf pointer to the data buffer * @param[in] len lenght of data buffer * * @init */ uint8_t onewireCRC(const uint8_t *buf, size_t len) { uint8_t ret = 0; size_t i; for (i=0; iconfig = NULL; owp->reg.slave_present = false; owp->reg.state = ONEWIRE_STOP; owp->thread = NULL; owp->reg.bytes = 0; owp->reg.bit = 0; owp->reg.final_timeslot = false; owp->buf = NULL; owp->pwmcfg = pwm_default_cfg; #if ONEWIRE_USE_STRONG_PULLUP owp->reg.need_pullup = false; #endif } /** * @brief Configures and activates the 1-wire driver. * * @param[in] owp pointer to the @p onewireDriver object * @param[in] config pointer to the @p onewireConfig object * * @api */ void onewireStart(onewireDriver *owp, const onewireConfig *config) { osalDbgCheck((NULL != owp) && (NULL != config)); osalDbgCheck(NULL != config->readBitX); osalDbgAssert(PWM_STOP == config->pwmd->state, "PWM will be started by onewire driver internally"); osalDbgAssert(ONEWIRE_STOP == owp->reg.state, "Invalid state"); #if ONEWIRE_USE_STRONG_PULLUP osalDbgCheck((NULL != config->pullup_assert) && (NULL != config->pullup_assert)); #endif owp->config = config; owp->reg.state = ONEWIRE_READY; chTMObjectInit(&search_rom_tm); } /** * @brief Deactivates the UART peripheral. * * @param[in] owp pointer to the @p onewireDriver object * * @api */ void onewireStop(onewireDriver *owp) { osalDbgCheck(NULL != owp); #if ONEWIRE_USE_STRONG_PULLUP owp->config->pullup_release(); #endif pwmStop(owp->config->pwmd); owp->config = NULL; owp->reg.state = ONEWIRE_STOP; } /** * @brief Generate reset pulse on bus. * * @param[in] owp pointer to the @p onewireDriver object * * @return Bool flag denoting device presence. * @retval true There is at least one device on bus. */ bool onewireReset(onewireDriver *owp) { PWMDriver *pwmd; osalDbgCheck(NULL != owp); osalDbgAssert(owp->reg.state == ONEWIRE_READY, "Invalid state"); /* short circuit on bus or any other device transmit data */ if (0 == owp->config->readBitX()) return false; pwmd = owp->config->pwmd; owp->pwmcfg.period = ONEWIRE_RESET_LOW_WIDTH + ONEWIRE_RESET_SAMPLE_WIDTH; owp->pwmcfg.callback = NULL; owp->pwmcfg.channels[owp->config->master_channel].callback = NULL; owp->pwmcfg.channels[owp->config->master_channel].mode = PWM_OUTPUT_ACTIVE_LOW; owp->pwmcfg.channels[owp->config->sample_channel].callback = pwm_reset_cb; owp->pwmcfg.channels[owp->config->sample_channel].mode = PWM_OUTPUT_ACTIVE_LOW; pwmStart(pwmd, &owp->pwmcfg); pwmEnableChannel(pwmd, owp->config->master_channel, ONEWIRE_RESET_LOW_WIDTH); pwmEnableChannel(pwmd, owp->config->sample_channel, ONEWIRE_RESET_SAMPLE_WIDTH); pwmEnableChannelNotification(pwmd, owp->config->sample_channel); osalSysLock(); osalThreadSuspendS(&owp->thread); osalSysUnlock(); pwmStop(pwmd); /* wait until slave release bus to discriminate short circuit condition */ osalThreadSleepMicroseconds(500); return (1 == owp->config->readBitX()) && (true == owp->reg.slave_present); } /** * @brief Read some bites from slave device. * * @param[in] owp pointer to the @p onewireDriver object * @param[out] rxbuf pointer to the buffer for read data * @param[in] rxbytes amount of data to be received */ void onewireRead(onewireDriver *owp, uint8_t *rxbuf, size_t rxbytes) { PWMDriver *pwmd; osalDbgCheck((NULL != owp) && (NULL != rxbuf)); osalDbgCheck((rxbytes > 0) && (rxbytes < 65536)); osalDbgAssert(owp->reg.state == ONEWIRE_READY, "Invalid state"); /* Buffer zeroing. This is important because of driver collects bits using |= operation.*/ memset(rxbuf, 0, rxbytes); pwmd = owp->config->pwmd; owp->reg.bit = 0; owp->reg.final_timeslot = false; owp->buf = rxbuf; owp->reg.bytes = rxbytes; owp->pwmcfg.period = ONEWIRE_ZERO_WIDTH + ONEWIRE_RECOVERY_WIDTH; owp->pwmcfg.callback = NULL; owp->pwmcfg.channels[owp->config->master_channel].callback = NULL; owp->pwmcfg.channels[owp->config->master_channel].mode = PWM_OUTPUT_ACTIVE_LOW; owp->pwmcfg.channels[owp->config->sample_channel].callback = pwm_read_bit_cb; owp->pwmcfg.channels[owp->config->sample_channel].mode = PWM_OUTPUT_ACTIVE_LOW; pwmStart(pwmd, &owp->pwmcfg); pwmEnableChannel(pwmd, owp->config->master_channel, ONEWIRE_ONE_WIDTH); pwmEnableChannel(pwmd, owp->config->sample_channel, ONEWIRE_SAMPLE_WIDTH); pwmEnableChannelNotification(pwmd, owp->config->sample_channel); osalSysLock(); osalThreadSuspendS(&owp->thread); osalSysUnlock(); pwmStop(pwmd); } /** * @brief Read some bites from slave device. * * @param[in] owp pointer to the @p onewireDriver object * @param[in] txbuf pointer to the buffer with data to be written * @param[in] txbytes amount of data to be written * @param[in] pullup_time how long strong pull up must be activated. Set * it to 0 if not needed. */ void onewireWrite(onewireDriver *owp, uint8_t *txbuf, size_t txbytes, systime_t pullup_time) { PWMDriver *pwmd; osalDbgCheck((NULL != owp) && (NULL != txbuf)); osalDbgCheck((txbytes > 0) && (txbytes < 65536)); osalDbgAssert(owp->reg.state == ONEWIRE_READY, "Invalid state"); #if !ONEWIRE_USE_STRONG_PULLUP osalDbgAssert(0 == pullup_time, "Non zero time is valid only when strong pull enabled"); #endif pwmd = owp->config->pwmd; owp->buf = txbuf; owp->reg.bit = 0; owp->reg.final_timeslot = false; owp->reg.bytes = txbytes; owp->pwmcfg.period = ONEWIRE_ZERO_WIDTH + ONEWIRE_RECOVERY_WIDTH; owp->pwmcfg.callback = pwm_write_bit_cb; owp->pwmcfg.channels[owp->config->master_channel].callback = NULL; owp->pwmcfg.channels[owp->config->master_channel].mode = PWM_OUTPUT_ACTIVE_LOW; owp->pwmcfg.channels[owp->config->sample_channel].callback = NULL; owp->pwmcfg.channels[owp->config->sample_channel].mode = PWM_OUTPUT_DISABLED; #if ONEWIRE_USE_STRONG_PULLUP if (pullup_time > 0) { owp->reg.state = ONEWIRE_PULL_UP; owp->reg.need_pullup = true; } #endif pwmStart(pwmd, &owp->pwmcfg); pwmEnablePeriodicNotification(pwmd); osalSysLock(); osalThreadSuspendS(&owp->thread); osalSysUnlock(); pwmDisablePeriodicNotification(pwmd); pwmStop(pwmd); #if ONEWIRE_USE_STRONG_PULLUP if (pullup_time > 0) { osalThreadSleep(pullup_time); owp->config->pullup_release(); owp->reg.state = ONEWIRE_READY; } #endif } /** * @brief Performs tree search on bus. * @note This function does internal 1-wire reset calls every search * iteration. * * @param[in] owp pointer to a @p OWDriver object * @param[out] result pointer to buffer for discovered ROMs * @param[in] max_rom_cnt buffer size in ROMs count for overflow prevention * * @return Count of discovered ROMs. May be more than max_rom_cnt. * @retval 0 no ROMs found or communication error occurred. */ size_t onewireSearchRom(onewireDriver *owp, uint8_t *result, size_t max_rom_cnt) { PWMDriver *pwmd; uint8_t cmd; osalDbgCheck(NULL != owp); osalDbgAssert(ONEWIRE_READY == owp->reg.state, "Invalid state"); osalDbgCheck((max_rom_cnt <= 256) && (max_rom_cnt > 0)); pwmd = owp->config->pwmd; cmd = ONEWIRE_CMD_SEARCH_ROM; search_clean_start(&owp->search_rom); do { /* every search must be started from reset pulse */ if (false == onewireReset(owp)) return 0; /* initialize buffer to store result */ if (owp->search_rom.reg.devices_found >= max_rom_cnt) owp->search_rom.retbuf = result + 8*(max_rom_cnt-1); else owp->search_rom.retbuf = result + 8*owp->search_rom.reg.devices_found; memset(owp->search_rom.retbuf, 0, 8); /* clean iteration state */ search_clean_iteration(&owp->search_rom); /**/ onewireWrite(&OWD1, &cmd, 1, 0); /* Reconfiguration always needed because of previous call onewireWrite.*/ owp->pwmcfg.period = ONEWIRE_ZERO_WIDTH + ONEWIRE_RECOVERY_WIDTH; owp->pwmcfg.callback = NULL; owp->pwmcfg.channels[owp->config->master_channel].callback = NULL; owp->pwmcfg.channels[owp->config->master_channel].mode = PWM_OUTPUT_ACTIVE_LOW; owp->pwmcfg.channels[owp->config->sample_channel].callback = pwm_search_rom_cb; owp->pwmcfg.channels[owp->config->sample_channel].mode = PWM_OUTPUT_ACTIVE_LOW; pwmStart(pwmd, &owp->pwmcfg); pwmEnableChannel(pwmd, owp->config->master_channel, ONEWIRE_ONE_WIDTH); pwmEnableChannel(pwmd, owp->config->sample_channel, ONEWIRE_SAMPLE_WIDTH); pwmEnableChannelNotification(pwmd, owp->config->sample_channel); osalSysLock(); osalThreadSuspendS(&owp->thread); osalSysUnlock(); pwmStop(pwmd); if (ONEWIRE_SEARCH_ROM_ERROR != owp->search_rom.reg.result) { /* check CRC and return 0 (error status) if mismatch */ if (owp->search_rom.retbuf[7] != onewireCRC(owp->search_rom.retbuf, 7)) return 0; /* store cached result for usage in next iteration */ memcpy(owp->search_rom.prev_path, owp->search_rom.retbuf, 8); } } while (ONEWIRE_SEARCH_ROM_SUCCESS == owp->search_rom.reg.result); /**/ if (ONEWIRE_SEARCH_ROM_ERROR == owp->search_rom.reg.result) return 0; else return owp->search_rom.reg.devices_found; } /* * Included (if enabled) test code */ #if ONEWIRE_SYNTH_SEARCH_TEST #include "search_rom_synth.c" #endif #endif /* HAL_USE_ONEWIRE */ /** @} */