/* Copyright (C) 2014..2017 Marco Veeneman Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. You may obtain a copy of the License at http://www.apache.org/licenses/LICENSE-2.0 Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License. */ /** * @file SSI/hal_spi_lld.h * @brief TM4C123x/TM4C129x SPI subsystem low level driver. * * @addtogroup SPI * @{ */ #ifndef HAL_SPI_LLD_H #define HAL_SPI_LLD_H #if HAL_USE_SPI || defined(__DOXYGEN__) /*===========================================================================*/ /* Driver constants. */ /*===========================================================================*/ /** * @brief CR0 Serial Clock Rate helper. */ #define SSI_CR0_SCR(n) ((n) << 8) /*===========================================================================*/ /* Driver pre-compile time settings. */ /*===========================================================================*/ /** * @name Configuration options * @{ */ /** * @brief SSI0 driver enable switch. * @details If set to @p TRUE the support for SSI0 is included. * @note The default is @p FALSE. */ #if !defined(TIVA_SPI_USE_SSI0) || defined(__DOXYGEN__) #define TIVA_SPI_USE_SSI0 FALSE #endif /** * @brief SSI1 driver enable switch. * @details If set to @p TRUE the support for SSI1 is included. * @note The default is @p FALSE. */ #if !defined(TIVA_SPI_USE_SSI1) || defined(__DOXYGEN__) #define TIVA_SPI_USE_SSI1 FALSE #endif /** * @brief SSI2 driver enable switch. * @details If set to @p TRUE the support for SSI2 is included. * @note The default is @p FALSE. */ #if !defined(TIVA_SPI_USE_SSI2) || defined(__DOXYGEN__) #define TIVA_SPI_USE_SSI2 FALSE #endif /** * @brief SSI3 driver enable switch. * @details If set to @p TRUE the support for SSI3 is included. * @note The default is @p FALSE. */ #if !defined(TIVA_SPI_USE_SSI3) || defined(__DOXYGEN__) #define TIVA_SPI_USE_SSI3 FALSE #endif /** * @brief SPID1 interrupt priority level setting. */ #if !defined(TIVA_SPI_SSI0_IRQ_PRIORITY) || defined(__DOXYGEN__) #define TIVA_SPI_SSI0_IRQ_PRIORITY 5 #endif /** * @brief SPID2 interrupt priority level setting. */ #if !defined(TIVA_SPI_SSI1_IRQ_PRIORITY) || defined(__DOXYGEN__) #define TIVA_SPI_SSI1_IRQ_PRIORITY 5 #endif /** * @brief SPID3 interrupt priority level setting. */ #if !defined(TIVA_SPI_SSI2_IRQ_PRIORITY) || defined(__DOXYGEN__) #define TIVA_SPI_SSI2_IRQ_PRIORITY 5 #endif /** * @brief SPID4 interrupt priority level setting. */ #if !defined(TIVA_SPI_SSI3_IRQ_PRIORITY) || defined(__DOXYGEN__) #define TIVA_SPI_SSI3_IRQ_PRIORITY 5 #endif /** * @brief SPI error hook. */ #if !defined(TIVA_SPI_SSI_ERROR_HOOK) || defined(__DOXYGEN__) #define TIVA_SPI_SSI_ERROR_HOOK(spip) osalSysHalt("SSI failure") #endif /*===========================================================================*/ /* Derived constants and error checks. */ /*===========================================================================*/ #if TIVA_SPI_USE_SSI0 && !TIVA_HAS_SSI0 #error "SSI0 not present in the selected device" #endif #if TIVA_SPI_USE_SSI1 && !TIVA_HAS_SSI1 #error "SSI1 not present in the selected device" #endif #if TIVA_SPI_USE_SSI2 && !TIVA_HAS_SSI2 #error "SSI2 not present in the selected device" #endif #if TIVA_SPI_USE_SSI3 && !TIVA_HAS_SSI03 #error "SSI3 not present in the selected device" #endif #if !TIVA_SPI_USE_SSI0 && !TIVA_SPI_USE_SSI1 && !TIVA_SPI_USE_SSI2 && \ !TIVA_SPI_USE_SSI3 #error "SPI driver activated but no SSI peripheral assigned" #endif #if TIVA_SPI_USE_SSI0 && \ !OSAL_IRQ_IS_VALID_PRIORITY(TIVA_SPI_SSI0_IRQ_PRIORITY) #error "Invalid IRQ priority assigned to SSI0" #endif #if TIVA_SPI_USE_SSI1 && \ !OSAL_IRQ_IS_VALID_PRIORITY(TIVA_SPI_SSI1_IRQ_PRIORITY) #error "Invalid IRQ priority assigned to SSI1" #endif #if TIVA_SPI_USE_SSI2 && \ !OSAL_IRQ_IS_VALID_PRIORITY(TIVA_SPI_SSI2_IRQ_PRIORITY) #error "Invalid IRQ priority assigned to SSI2" #endif #if TIVA_SPI_USE_SSI3 && \ !OSAL_IRQ_IS_VALID_PRIORITY(TIVA_SPI_SSI3_IRQ_PRIORITY) #error "Invalid IRQ priority assigned to SSI3" #endif #if !defined(TIVA_UDMA_REQUIRED) #define TIVA_UDMA_REQUIRED #endif #if SPI_SELECT_MODE == SPI_SELECT_MODE_LLD #error "SPI_SELECT_MODE_LLD not supported by this driver" #endif /*===========================================================================*/ /* Driver data structures and types. */ /*===========================================================================*/ /** * @brief Type of a structure representing an SPI driver. */ typedef struct SPIDriver SPIDriver; /** * @brief SPI notification callback type. * * @param[in] spip pointer to the @p SPIDriver object triggering the * callback */ typedef void (*spicallback_t)(SPIDriver *spip); /** * @brief Driver configuration structure. */ typedef struct { /** * @brief Operation complete callback or @p NULL. */ spicallback_t end_cb; #if (SPI_SELECT_MODE == SPI_SELECT_MODE_LINE) || defined(__DOXYGEN__) /** * @brief The chip select line. */ ioline_t ssline; #endif #if (SPI_SELECT_MODE == SPI_SELECT_MODE_PORT) || defined(__DOXYGEN__) /** * @brief The chip select port. */ ioportid_t ssport; /** * @brief The chip select port mask. */ uint8fast_t ssmask; #endif #if (SPI_SELECT_MODE == SPI_SELECT_MODE_PAD) || defined(__DOXYGEN__) /** * @brief The chip select port. */ ioportid_t ssport; /** * @brief The chip select pad number. */ uint_fast8_t sspad; #endif /* End of the mandatory fields.*/ /** * @brief SSI CR0 initialization data. */ uint16_t cr0; /** * @brief SSI CPSR initialization data. */ uint32_t cpsr; } SPIConfig; /** * @brief Structure representing a SPI driver. */ struct SPIDriver { /** * @brief Driver state. */ spistate_t state; /** * @brief Current configuration data. */ const SPIConfig *config; #if SPI_USE_WAIT || defined(__DOXYGEN__) /** * @brief Waiting thread. */ thread_reference_t thread; #endif /* SPI_USE_WAIT */ #if SPI_USE_MUTUAL_EXCLUSION || defined(__DOXYGEN__) /** * @brief Mutex protecting the bus. */ mutex_t mutex; #endif /* SPI_USE_MUTUAL_EXCLUSION */ #if defined(SPI_DRIVER_EXT_FIELDS) SPI_DRIVER_EXT_FIELDS #endif /* End of the mandatory fields.*/ /** * @brief Pointer to the SSI registers block. */ uint32_t ssi; /** * @brief Receive DMA channel number. */ uint8_t dmarxnr; /** * @brief Transmit DMA channel number. */ uint8_t dmatxnr; /** * @brief Receive DMA channel map. */ uint8_t rxchnmap; /** * @brief Transmit DMA channel map. */ uint8_t txchnmap; }; /*===========================================================================*/ /* Driver macros. */ /*===========================================================================*/ /*===========================================================================*/ /* External declarations. */ /*===========================================================================*/ #if TIVA_SPI_USE_SSI0 && !defined(__DOXYGEN__) extern SPIDriver SPID1; #endif #if TIVA_SPI_USE_SSI1 && !defined(__DOXYGEN__) extern SPIDriver SPID2; #endif #if TIVA_SPI_USE_SSI2 && !defined(__DOXYGEN__) extern SPIDriver SPID3; #endif #if TIVA_SPI_USE_SSI3 && !defined(__DOXYGEN__) extern SPIDriver SPID4; #endif #ifdef __cplusplus extern "C" { #endif void spi_lld_init(void); void spi_lld_start(SPIDriver *spip); void spi_lld_stop(SPIDriver *spip); #if (SPI_SELECT_MODE == SPI_SELECT_MODE_LLD) || defined(__DOXYGEN__) void spi_lld_select(SPIDriver *spip); void spi_lld_unselect(SPIDriver *spip); #endif void spi_lld_ignore(SPIDriver *spip, size_t n); void spi_lld_exchange(SPIDriver *spip, size_t n, const void *txbuf, void *rxbuf); void spi_lld_send(SPIDriver *spip, size_t n, const void *txbuf); void spi_lld_receive(SPIDriver *spip, size_t n, void *rxbuf); uint16_t spi_lld_polled_exchange(SPIDriver *spip, uint16_t frame); #ifdef __cplusplus } #endif #endif /* HAL_USE_SPI */ #endif /* HAL_SPI_LLD_H */ /** @} */