/*
    Copyright (C) 2015 Stephen Caudle

    Licensed under the Apache License, Version 2.0 (the "License");
    you may not use this file except in compliance with the License.
    You may obtain a copy of the License at

        http://www.apache.org/licenses/LICENSE-2.0

    Unless required by applicable law or agreed to in writing, software
    distributed under the License is distributed on an "AS IS" BASIS,
    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
    See the License for the specific language governing permissions and
    limitations under the License.
*/

/**
 * @file    ADCv1/adc_lld.h
 * @brief   NRF51 ADC subsystem low level driver header.
 *
 * @addtogroup ADC
 * @{
 */

#ifndef HAL_ADC_LLD_H
#define HAL_ADC_LLD_H

#if HAL_USE_ADC || defined(__DOXYGEN__)

/*===========================================================================*/
/* Driver constants.                                                         */
/*===========================================================================*/

/*===========================================================================*/
/* Driver pre-compile time settings.                                         */
/*===========================================================================*/

/**
 * @name    Configuration options
 * @{
 */
/**
 * @brief   ADC1 driver enable switch.
 * @details If set to @p TRUE the support for ADC1 is included.
 * @note    The default is @p FALSE.
 */
#if !defined(NRF5_ADC_USE_ADC1) || defined(__DOXYGEN__)
#define NRF5_ADC_USE_ADC1                  FALSE
#endif

/**
 * @brief   ADC interrupt priority level setting.
 */
#if !defined(NRF5_ADC_IRQ_PRIORITY) || defined(__DOXYGEN__)
#define NRF5_ADC_IRQ_PRIORITY              2
#endif

/** @} */

/*===========================================================================*/
/* Derived constants and error checks.                                       */
/*===========================================================================*/

#if !NRF5_ADC_USE_ADC1
#error "ADC driver activated but no ADC peripheral assigned"
#endif

#if NRF5_ADC_USE_ADC1 &&                                                   \
    !OSAL_IRQ_IS_VALID_PRIORITY(NRF5_ADC_IRQ_PRIORITY)
#error "Invalid IRQ priority assigned to ADC1"
#endif

/*===========================================================================*/
/* Driver data structures and types.                                         */
/*===========================================================================*/

/**
 * @brief   ADC sample data type.
 */
typedef uint16_t adcsample_t;

/**
 * @brief   Channels number in a conversion group.
 */
typedef uint8_t adc_channels_num_t;

/**
 * @brief   Type of a structure representing an ADC driver.
 */
typedef struct ADCDriver ADCDriver;

/**
 * @brief   ADC notification callback type.
 *
 * @param[in] adcp      pointer to the @p ADCDriver object triggering the
 *                      callback
 * @param[in] buffer    pointer to the most recent samples data
 * @param[in] n         number of buffer rows available starting from @p buffer
 */
typedef void (*adccallback_t)(ADCDriver *adcp, adcsample_t *buffer, size_t n);

/**
 * @brief   Conversion group configuration structure.
 * @details This implementation-dependent structure describes a conversion
 *          operation.
 * @note    The use of this configuration structure requires knowledge of
 *          STM32 ADC cell registers interface, please refer to the STM32
 *          reference manual for details.
 */
typedef struct {
  /**
   * @brief   Enables the circular buffer mode for the group.
   */
  bool                      circular;
  /**
   * @brief   Number of the analog channels belonging to the conversion group.
   */
  adc_channels_num_t        num_channels;
  /**
   * @brief   Callback function associated to the group or @p NULL.
   */
  adccallback_t             end_cb;
  /* End of the mandatory fields.*/
  /**
   * @brief   Bitmask of channels for ADC conversion.
   */
  uint32_t                  channel_mask;
  /**
   * @brief   ADC CONFIG register details.
   * @note    All the required bits must be defined into this field.
   */
  uint32_t                  cfg;
} ADCConversionGroup;

/**
 * @brief   Driver configuration structure.
 * @note    It could be empty on some architectures.
 */
typedef struct {
  uint32_t                  dummy;
} ADCConfig;

/**
 * @brief   Structure representing an ADC driver.
 */
struct ADCDriver {
  /**
   * @brief Driver state.
   */
  adcstate_t                state;
  /**
   * @brief Current configuration data.
   */
  const ADCConfig           *config;
  /**
   * @brief Current samples buffer pointer or @p NULL.
   */
  adcsample_t               *samples;
  /**
   * @brief Current samples buffer depth or @p 0.
   */
  size_t                    depth;
  /**
   * @brief Current conversion group pointer or @p NULL.
   */
  const ADCConversionGroup  *grpp;
#if ADC_USE_WAIT || defined(__DOXYGEN__)
  /**
   * @brief Waiting thread.
   */
  thread_reference_t        thread;
#endif
#if ADC_USE_MUTUAL_EXCLUSION || defined(__DOXYGEN__)
  /**
   * @brief Mutex protecting the peripheral.
   */
  mutex_t                   mutex;
#endif /* ADC_USE_MUTUAL_EXCLUSION */
#if defined(ADC_DRIVER_EXT_FIELDS)
  ADC_DRIVER_EXT_FIELDS
#endif
  /* End of the mandatory fields.*/
  /**
   * @brief Pointer to the ADCx registers block.
   */
  NRF_ADC_Type             *adc;
  /**
   * @brief Number of samples expected.
   */
  size_t                    number_of_samples;
  /**
   * @brief Current position in the buffer.
   */
  size_t                    current_index;
  /**
   * @brief Current channel index into group channel_mask.
   */
  size_t                    current_channel;
};

/*===========================================================================*/
/* Driver macros.                                                            */
/*===========================================================================*/

/*===========================================================================*/
/* External declarations.                                                    */
/*===========================================================================*/

#if NRF5_ADC_USE_ADC1 && !defined(__DOXYGEN__)
extern ADCDriver ADCD1;
#endif

#ifdef __cplusplus
extern "C" {
#endif
  void adc_lld_init(void);
  void adc_lld_start(ADCDriver *adcp);
  void adc_lld_stop(ADCDriver *adcp);
  void adc_lld_start_conversion(ADCDriver *adcp);
  void adc_lld_stop_conversion(ADCDriver *adcp);
#ifdef __cplusplus
}
#endif

#endif /* HAL_USE_ADC */

#endif /* HAL_ADC_LLD_H */

/** @} */