/* ChibiOS - Copyright (C) 2013-2015 Fabio Utzig Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. You may obtain a copy of the License at http://www.apache.org/licenses/LICENSE-2.0 Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License. */ /** * @file KL2x/serial_lld.h * @brief Kinetis KL2x Serial Driver subsystem low level driver header. * * @addtogroup SERIAL * @{ */ #ifndef HAL_SERIAL_LLD_H_ #define HAL_SERIAL_LLD_H_ #if HAL_USE_SERIAL || defined(__DOXYGEN__) /*===========================================================================*/ /* Driver constants. */ /*===========================================================================*/ /*===========================================================================*/ /* Driver pre-compile time settings. */ /*===========================================================================*/ /** * @name Configuration options * @{ */ /** * @brief SD1 driver enable switch. * @details If set to @p TRUE the support for SD1 is included. */ #if !defined(KINETIS_SERIAL_USE_UART0) || defined(__DOXYGEN__) #define KINETIS_SERIAL_USE_UART0 FALSE #endif /** * @brief SD2 driver enable switch. * @details If set to @p TRUE the support for SD2 is included. */ #if !defined(KINETIS_SERIAL_USE_UART1) || defined(__DOXYGEN__) #define KINETIS_SERIAL_USE_UART1 FALSE #endif /** * @brief SD3 driver enable switch. * @details If set to @p TRUE the support for SD3 is included. */ #if !defined(KINETIS_SERIAL_USE_UART2) || defined(__DOXYGEN__) #define KINETIS_SERIAL_USE_UART2 FALSE #endif /** * @brief SD4 driver enable switch. * @details If set to @p TRUE the support for SD4 is included. */ #if !defined(KINETIS_SERIAL_USE_UART3) || defined(__DOXYGEN__) #define KINETIS_SERIAL_USE_UART3 FALSE #endif /** * @brief SD5 driver enable switch. * @details If set to @p TRUE the support for SD5 is included. */ #if !defined(KINETIS_SERIAL_USE_UART4) || defined(__DOXYGEN__) #define KINETIS_SERIAL_USE_UART4 FALSE #endif /** * @brief SD6 driver enable switch. * @details If set to @p TRUE the support for SD6 is included. */ #if !defined(KINETIS_SERIAL_USE_UART5) || defined(__DOXYGEN__) #define KINETIS_SERIAL_USE_UART5 FALSE #endif /** * @brief UART0 interrupt priority level setting. */ #if !defined(KINETIS_SERIAL_UART0_PRIORITY) || defined(__DOXYGEN__) #define KINETIS_SERIAL_UART0_PRIORITY 12 #endif /** * @brief UART1 interrupt priority level setting. */ #if !defined(KINETIS_SERIAL_UART1_PRIORITY) || defined(__DOXYGEN__) #define KINETIS_SERIAL_UART1_PRIORITY 12 #endif /** * @brief UART2 interrupt priority level setting. */ #if !defined(KINETIS_SERIAL_UART2_PRIORITY) || defined(__DOXYGEN__) #define KINETIS_SERIAL_UART2_PRIORITY 12 #endif /** * @brief UART3 interrupt priority level setting. */ #if !defined(KINETIS_SERIAL_UART3_PRIORITY) || defined(__DOXYGEN__) #define KINETIS_SERIAL_UART3_PRIORITY 12 #endif /** * @brief UART4 interrupt priority level setting. */ #if !defined(KINETIS_SERIAL_UART4_PRIORITY) || defined(__DOXYGEN__) #define KINETIS_SERIAL_UART4_PRIORITY 12 #endif /** * @brief UART5 interrupt priority level setting. */ #if !defined(KINETIS_SERIAL_UART5_PRIORITY) || defined(__DOXYGEN__) #define KINETIS_SERIAL_UART5_PRIORITY 12 #endif /** * @brief UART0 clock source. */ #if !defined(KINETIS_UART0_CLOCK_SRC) || defined(__DOXYGEN__) #define KINETIS_UART0_CLOCK_SRC 1 /* MCGFLLCLK clock, or MCGPLLCLK/2; or IRC48M */ #endif /** * @brief UART1 clock source. */ #if !defined(KINETIS_UART1_CLOCK_SRC) || defined(__DOXYGEN__) #define KINETIS_UART1_CLOCK_SRC 1 /* IRC48M */ #endif /** @} */ /*===========================================================================*/ /* Derived constants and error checks. */ /*===========================================================================*/ /** @brief error checks */ #if KINETIS_SERIAL_USE_UART0 && !KINETIS_HAS_SERIAL0 #error "UART0 not present in the selected device" #endif #if KINETIS_SERIAL_USE_UART1 && !KINETIS_HAS_SERIAL1 #error "UART1 not present in the selected device" #endif #if KINETIS_SERIAL_USE_UART2 && !KINETIS_HAS_SERIAL2 #error "UART2 not present in the selected device" #endif #if KINETIS_SERIAL_USE_UART3 && !KINETIS_HAS_SERIAL3 #error "UART3 not present in the selected device" #endif #if KINETIS_SERIAL_USE_UART4 && !KINETIS_HAS_SERIAL4 #error "UART4 not present in the selected device" #endif #if KINETIS_SERIAL_USE_UART5 && !KINETIS_HAS_SERIAL5 #error "UART5 not present in the selected device" #endif #if !(KINETIS_SERIAL_USE_UART0 || KINETIS_SERIAL_USE_UART1 || \ KINETIS_SERIAL_USE_UART2 || KINETIS_SERIAL_USE_UART3 || \ KINETIS_SERIAL_USE_UART4 || KINETIS_SERIAL_USE_UART5) #error "Serial driver activated but no UART peripheral assigned" #endif /*===========================================================================*/ /* Driver data structures and types. */ /*===========================================================================*/ /** * @brief Generic Serial Driver configuration structure. * @details An instance of this structure must be passed to @p sdStart() * in order to configure and start a serial driver operations. * @note Implementations may extend this structure to contain more, * architecture dependent, fields. */ typedef struct { /** * @brief Bit rate. */ uint32_t sc_speed; /* End of the mandatory fields.*/ } SerialConfig; /** * @brief Generic UART register structure. * @note Individual UART register blocks (even within the same chip) can differ. */ typedef struct { volatile uint8_t* bdh_p; volatile uint8_t* bdl_p; volatile uint8_t* c1_p; volatile uint8_t* c2_p; volatile uint8_t* c3_p; volatile uint8_t* c4_p; volatile uint8_t* s1_p; volatile uint8_t* s2_p; volatile uint8_t* d_p; UART_TypeDef *uart_p; #if KINETIS_SERIAL_USE_UART0 && KINETIS_SERIAL0_IS_UARTLP UARTLP_TypeDef *uartlp_p; #endif /* KINETIS_SERIAL_USE_UART0 && KINETIS_SERIAL0_IS_UARTLP */ #if (KINETIS_SERIAL_USE_UART0 && KINETIS_SERIAL0_IS_LPUART) \ || (KINETIS_SERIAL_USE_UART1 && KINETIS_SERIAL1_IS_LPUART) LPUART_TypeDef *lpuart_p; #endif /* KINETIS_SERIAL_USE_UART0 && KINETIS_SERIAL0_IS_LPUART */ } UART_w_TypeDef; /** * @brief @p SerialDriver specific data. */ #define _serial_driver_data \ _base_asynchronous_channel_data \ /* Driver state.*/ \ sdstate_t state; \ /* Input queue.*/ \ input_queue_t iqueue; \ /* Output queue.*/ \ output_queue_t oqueue; \ /* Input circular buffer.*/ \ uint8_t ib[SERIAL_BUFFERS_SIZE]; \ /* Output circular buffer.*/ \ uint8_t ob[SERIAL_BUFFERS_SIZE]; \ /* End of the mandatory fields.*/ \ /* Pointer to the UART registers block.*/ \ UART_w_TypeDef uart; /*===========================================================================*/ /* Driver macros. */ /*===========================================================================*/ /*===========================================================================*/ /* External declarations. */ /*===========================================================================*/ #if KINETIS_SERIAL_USE_UART0 && !defined(__DOXYGEN__) extern SerialDriver SD1; #endif #if KINETIS_SERIAL_USE_UART1 && !defined(__DOXYGEN__) extern SerialDriver SD2; #endif #if KINETIS_SERIAL_USE_UART2 && !defined(__DOXYGEN__) extern SerialDriver SD3; #endif #if KINETIS_SERIAL_USE_UART3 && !defined(__DOXYGEN__) extern SerialDriver SD4; #endif #if KINETIS_SERIAL_USE_UART4 && !defined(__DOXYGEN__) extern SerialDriver SD5; #endif #if KINETIS_SERIAL_USE_UART5 && !defined(__DOXYGEN__) extern SerialDriver SD6; #endif #ifdef __cplusplus extern "C" { #endif void sd_lld_init(void); void sd_lld_start(SerialDriver *sdp, const SerialConfig *config); void sd_lld_stop(SerialDriver *sdp); #ifdef __cplusplus } #endif #endif /* HAL_USE_SERIAL */ #endif /* HAL_SERIAL_LLD_H_ */ /** @} */