/* Copyright (C) 2016 Stephane D'Alu Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. You may obtain a copy of the License at http://www.apache.org/licenses/LICENSE-2.0 Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License. */ #ifndef _BOARD_H_ #define _BOARD_H_ /* Board identifier. */ #define BOARD_NRF52_EBYTE_E73 #define BOARD_NAME "nRF52 EBYTE E73-2G4M04S" /* Board oscillators-related settings. */ #define NRF5_XTAL_VALUE 32000000 #define NRF5_HFCLK_SOURCE NRF5_HFCLK_HFXO #define NRF5_LFCLK_SOURCE NRF5_LFCLK_XTAL #define NRF5_HFCLK_HFINT 0 #define NRF5_HFCLK_HFXO 1 #define NRF5_LFCLK_RC 0 #define NRF5_LFCLK_XTAL 1 #define NRF5_LFCLK_SYNTH 2 /* * GPIO pins. */ /* Defined by board */ #define BTN1 13U #define BTN2 14U #define BTN3 15U #define BTN4 16U #define LED1 17U #define LED2 18U #define LED3 19U #define LED4 20U #define UART_RTS 5U #define UART_TX 6U #define UART_CTS 7U #define UART_RX 8U #define NFC1 9U #define NFC2 10U #define I2C_SCL 27U #define I2C_SDA 26U /* Our definitions */ #define SPI_SCK 25U #define SPI_MOSI 24U #define SPI_MISO 23U #define SPI_SS 22U /* Analog input */ #define AIN0 2U #define AIN1 3U #define AIN2 4U #define AIN3 5U #define AIN4 28U #define AIN5 29U #define AIN6 30U #define AIN7 31U #define AREF0 AIN0 #define AREF1 AIN1 /* * IO pins assignments. */ /* Defined by board */ #define IOPORT1_BTN1 13U #define IOPORT1_BTN2 14U #define IOPORT1_BTN3 15U #define IOPORT1_BTN4 16U #define IOPORT1_LED1 17U #define IOPORT1_LED2 18U #define IOPORT1_LED3 19U #define IOPORT1_LED4 20U #define IOPORT1_UART_RTS 5U #define IOPORT1_UART_TX 6U #define IOPORT1_UART_CTS 7U #define IOPORT1_UART_RX 8U #define IOPORT1_NFC1 9U #define IOPORT1_NFC2 10U #define IOPORT1_I2C_SCL 27U #define IOPORT1_I2C_SDA 26U #define IOPORT1_RESET 21U /* Our definitions */ #define IOPORT1_SPI_SCK 25U #define IOPORT1_SPI_MOSI 24U #define IOPORT1_SPI_MISO 23U #define IOPORT1_SPI_SS 22U /* Analog inpupt */ #define IOPORT1_AIN0 2U #define IOPORT1_AIN1 3U #define IOPORT1_AIN2 4U #define IOPORT1_AIN3 5U #define IOPORT1_AIN4 28U #define IOPORT1_AIN5 29U #define IOPORT1_AIN6 30U #define IOPORT1_AIN7 31U #define IOPORT1_AREF0 IOPORT1_AIN0 #define IOPORT1_AREF1 IOPORT1_AIN1 /* * IO lines assignments. */ /* Board defined */ #define LINE_BTN1 PAL_LINE(IOPORT1, IOPORT1_BTN1) #define LINE_BTN2 PAL_LINE(IOPORT1, IOPORT1_BTN2) #define LINE_BTN3 PAL_LINE(IOPORT1, IOPORT1_BTN3) #define LINE_BTN4 PAL_LINE(IOPORT1, IOPORT1_BTN4) #define LINE_LED1 PAL_LINE(IOPORT1, IOPORT1_LED1) #define LINE_LED2 PAL_LINE(IOPORT1, IOPORT1_LED2) #define LINE_LED3 PAL_LINE(IOPORT1, IOPORT1_LED3) #define LINE_LED4 PAL_LINE(IOPORT1, IOPORT1_LED4) #define LINE_UART_RTS PAL_LINE(IOPORT1, IOPORT1_UART_RTS) #define LINE_UART_TX PAL_LINE(IOPORT1, IOPORT1_UART_TX) #define LINE_UART_CTS PAL_LINE(IOPORT1, IOPORT1_UART_CTS) #define LINE_UART_RX PAL_LINE(IOPORT1, IOPORT1_UART_RX) #define LINE_NFC1 PAL_LINE(IOPORT1, IOPORT1_NFC1) #define LINE_NFC2 PAL_LINE(IOPORT1, IOPORT1_NFC2) #define LINE_I2C_SCL PAL_LINE(IOPORT1, IOPORT1_I2C_SCL) #define LINE_I2C_SDA PAL_LINE(IOPORT1, IOPORT1_I2C_SDA) /* Our definitions */ #define LINE_SPI_SCK PAL_LINE(IOPORT1, IOPORT1_SPI_SCK) #define LINE_SPI_MOSI PAL_LINE(IOPORT1, IOPORT1_SPI_MOSI) #define LINE_SPI_MISO PAL_LINE(IOPORT1, IOPORT1_SPI_MISO) #define LINE_SPI_SS PAL_LINE(IOPORT1, IOPORT1_SPI_SS) /* Analog line */ #define LINE_AIN0 PAL_LINE(IOPORT1, IOPORT1_AIN0) #define LINE_AIN1 PAL_LINE(IOPORT1, IOPORT1_AIN1) #define LINE_AIN2 PAL_LINE(IOPORT1, IOPORT1_AIN2) #define LINE_AIN3 PAL_LINE(IOPORT1, IOPORT1_AIN3) #define LINE_AIN4 PAL_LINE(IOPORT1, IOPORT1_AIN4) #define LINE_AIN5 PAL_LINE(IOPORT1, IOPORT1_AIN5) #define LINE_AIN6 PAL_LINE(IOPORT1, IOPORT1_AIN6) #define LINE_AIN7 PAL_LINE(IOPORT1, IOPORT1_AIN7) #define LINE_AREF0 PAL_LINE(IOPORT1, IOPORT1_AREF0) #define LINE_AREF1 PAL_LINE(IOPORT1, IOPORT1_AREF1) #if !defined(_FROM_ASM_) #ifdef __cplusplus extern "C" { #endif void boardInit(void); #ifdef __cplusplus } #endif #endif /* _FROM_ASM_ */ #endif /* _BOARD_H_ */