From 230c39fc141611ae608ca93e2d75c2f9cccc9def Mon Sep 17 00:00:00 2001 From: marcoveeneman Date: Fri, 16 Mar 2018 22:00:33 +0100 Subject: Moved pal testhal makefiles and configuration into folders --- testhal/TIVA/multi/PAL/Makefile | 8 +- testhal/TIVA/multi/PAL/Makefile-tm4c123g_launchpad | 215 -------- testhal/TIVA/multi/PAL/Makefile-tm4c1294_launchpad | 215 -------- .../TIVA/multi/PAL/cfg-tm4c123g_launchpad/chconf.h | 608 --------------------- .../multi/PAL/cfg-tm4c123g_launchpad/halconf.h | 417 -------------- .../multi/PAL/cfg-tm4c123g_launchpad/mcuconf.h | 168 ------ .../TIVA/multi/PAL/cfg-tm4c123g_launchpad/portab.c | 51 -- .../TIVA/multi/PAL/cfg-tm4c123g_launchpad/portab.h | 74 --- .../TIVA/multi/PAL/cfg-tm4c1294_launchpad/chconf.h | 608 --------------------- .../multi/PAL/cfg-tm4c1294_launchpad/halconf.h | 417 -------------- .../multi/PAL/cfg-tm4c1294_launchpad/mcuconf.h | 152 ------ .../TIVA/multi/PAL/cfg-tm4c1294_launchpad/portab.c | 51 -- .../TIVA/multi/PAL/cfg-tm4c1294_launchpad/portab.h | 74 --- .../TIVA/multi/PAL/cfg/tm4c123g_launchpad/chconf.h | 608 +++++++++++++++++++++ .../multi/PAL/cfg/tm4c123g_launchpad/halconf.h | 417 ++++++++++++++ .../multi/PAL/cfg/tm4c123g_launchpad/mcuconf.h | 168 ++++++ .../TIVA/multi/PAL/cfg/tm4c123g_launchpad/portab.c | 51 ++ .../TIVA/multi/PAL/cfg/tm4c123g_launchpad/portab.h | 74 +++ .../TIVA/multi/PAL/cfg/tm4c1294_launchpad/chconf.h | 608 +++++++++++++++++++++ .../multi/PAL/cfg/tm4c1294_launchpad/halconf.h | 417 ++++++++++++++ .../multi/PAL/cfg/tm4c1294_launchpad/mcuconf.h | 152 ++++++ .../TIVA/multi/PAL/cfg/tm4c1294_launchpad/portab.c | 51 ++ .../TIVA/multi/PAL/cfg/tm4c1294_launchpad/portab.h | 74 +++ testhal/TIVA/multi/PAL/make/tm4c123g_launchpad | 215 ++++++++ testhal/TIVA/multi/PAL/make/tm4c1294_launchpad | 215 ++++++++ 25 files changed, 3054 insertions(+), 3054 deletions(-) delete mode 100644 testhal/TIVA/multi/PAL/Makefile-tm4c123g_launchpad delete mode 100644 testhal/TIVA/multi/PAL/Makefile-tm4c1294_launchpad delete mode 100644 testhal/TIVA/multi/PAL/cfg-tm4c123g_launchpad/chconf.h delete mode 100644 testhal/TIVA/multi/PAL/cfg-tm4c123g_launchpad/halconf.h delete mode 100644 testhal/TIVA/multi/PAL/cfg-tm4c123g_launchpad/mcuconf.h delete mode 100644 testhal/TIVA/multi/PAL/cfg-tm4c123g_launchpad/portab.c delete mode 100644 testhal/TIVA/multi/PAL/cfg-tm4c123g_launchpad/portab.h delete mode 100644 testhal/TIVA/multi/PAL/cfg-tm4c1294_launchpad/chconf.h delete mode 100644 testhal/TIVA/multi/PAL/cfg-tm4c1294_launchpad/halconf.h delete mode 100644 testhal/TIVA/multi/PAL/cfg-tm4c1294_launchpad/mcuconf.h delete mode 100644 testhal/TIVA/multi/PAL/cfg-tm4c1294_launchpad/portab.c delete mode 100644 testhal/TIVA/multi/PAL/cfg-tm4c1294_launchpad/portab.h create mode 100644 testhal/TIVA/multi/PAL/cfg/tm4c123g_launchpad/chconf.h create mode 100644 testhal/TIVA/multi/PAL/cfg/tm4c123g_launchpad/halconf.h create mode 100644 testhal/TIVA/multi/PAL/cfg/tm4c123g_launchpad/mcuconf.h create mode 100644 testhal/TIVA/multi/PAL/cfg/tm4c123g_launchpad/portab.c create mode 100644 testhal/TIVA/multi/PAL/cfg/tm4c123g_launchpad/portab.h create mode 100644 testhal/TIVA/multi/PAL/cfg/tm4c1294_launchpad/chconf.h create mode 100644 testhal/TIVA/multi/PAL/cfg/tm4c1294_launchpad/halconf.h create mode 100644 testhal/TIVA/multi/PAL/cfg/tm4c1294_launchpad/mcuconf.h create mode 100644 testhal/TIVA/multi/PAL/cfg/tm4c1294_launchpad/portab.c create mode 100644 testhal/TIVA/multi/PAL/cfg/tm4c1294_launchpad/portab.h create mode 100644 testhal/TIVA/multi/PAL/make/tm4c123g_launchpad create mode 100644 testhal/TIVA/multi/PAL/make/tm4c1294_launchpad (limited to 'testhal') diff --git a/testhal/TIVA/multi/PAL/Makefile b/testhal/TIVA/multi/PAL/Makefile index 9efbf47..a9ef661 100644 --- a/testhal/TIVA/multi/PAL/Makefile +++ b/testhal/TIVA/multi/PAL/Makefile @@ -5,19 +5,19 @@ all: @echo @echo === Building for TM4C123G LaunchPad ================================ - @make --no-print-directory -f Makefile-tm4c123g_launchpad all + @make --no-print-directory -f ./make/tm4c123g_launchpad all @echo ==================================================================== @echo @echo === Building for TM4C1294 Connected LaunchPad ====================== - @make --no-print-directory -f Makefile-tm4c1294_launchpad all + @make --no-print-directory -f ./make/tm4c1294_launchpad all @echo ==================================================================== @echo clean: @echo - -@make --no-print-directory -f Makefile-tm4c123g_launchpad clean + -@make --no-print-directory -f ./make/tm4c123g_launchpad clean @echo - -@make --no-print-directory -f Makefile-tm4c1294_launchpad clean + -@make --no-print-directory -f ./make/tm4c1294_launchpad clean @echo # diff --git a/testhal/TIVA/multi/PAL/Makefile-tm4c123g_launchpad b/testhal/TIVA/multi/PAL/Makefile-tm4c123g_launchpad deleted file mode 100644 index 9df1d01..0000000 --- a/testhal/TIVA/multi/PAL/Makefile-tm4c123g_launchpad +++ /dev/null @@ -1,215 +0,0 @@ -############################################################################## -# Build global options -# NOTE: Can be overridden externally. -# - -# Compiler options here. -ifeq ($(USE_OPT),) - USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 -endif - -# C specific options here (added to USE_OPT). -ifeq ($(USE_COPT),) - USE_COPT = -endif - -# C++ specific options here (added to USE_OPT). -ifeq ($(USE_CPPOPT),) - USE_CPPOPT = -fno-rtti -endif - -# Enable this if you want the linker to remove unused code and data -ifeq ($(USE_LINK_GC),) - USE_LINK_GC = yes -endif - -# Linker extra options here. -ifeq ($(USE_LDOPT),) - USE_LDOPT = -endif - -# Enable this if you want link time optimizations (LTO) -ifeq ($(USE_LTO),) - USE_LTO = yes -endif - -# If enabled, this option allows to compile the application in THUMB mode. -ifeq ($(USE_THUMB),) - USE_THUMB = yes -endif - -# Enable this if you want to see the full log while compiling. -ifeq ($(USE_VERBOSE_COMPILE),) - USE_VERBOSE_COMPILE = no -endif - -# If enabled, this option makes the build process faster by not compiling -# modules not used in the current configuration. -ifeq ($(USE_SMART_BUILD),) - USE_SMART_BUILD = yes -endif - -# -# Build global options -############################################################################## - -############################################################################## -# Architecture or project specific options -# - -# Stack size to be allocated to the Cortex-M process stack. This stack is -# the stack used by the main() thread. -ifeq ($(USE_PROCESS_STACKSIZE),) - USE_PROCESS_STACKSIZE = 0x400 -endif - -# Stack size to the allocated to the Cortex-M main/exceptions stack. This -# stack is used for processing interrupts and exceptions. -ifeq ($(USE_EXCEPTIONS_STACKSIZE),) - USE_EXCEPTIONS_STACKSIZE = 0x400 -endif - -# Enables the use of FPU on Cortex-M4 (no, softfp, hard). -ifeq ($(USE_FPU),) - USE_FPU = no -endif - -# -# Architecture or project specific options -############################################################################## - -############################################################################## -# Project, sources and paths -# - -# Define project name here -PROJECT = ch - -# Imported source files and paths -CHIBIOS = ../../../../../ChibiOS-RT -CHIBIOS_CONTRIB = $(CHIBIOS)/../ChibiOS-Contrib -CONFDIR := ./cfg-tm4c123g_launchpad -BUILDDIR := ./build-tm4c123g_launchpad -DEPDIR := ./.dep-tm4c123g_launchpad - -# Licensing files. -include $(CHIBIOS)/os/license/license.mk -# Startup files. -include $(CHIBIOS_CONTRIB)/os/common/startup/ARMCMx/compilers/GCC/mk/startup_tm4c123x.mk -# HAL-OSAL files (optional). -include $(CHIBIOS)/os/hal/hal.mk -include $(CHIBIOS_CONTRIB)/os/hal/ports/TIVA/TM4C123x/platform.mk -include $(CHIBIOS_CONTRIB)/os/hal/boards/TI_TM4C123G_LAUNCHPAD/board.mk -include $(CHIBIOS)/os/hal/osal/rt/osal.mk -# RTOS files (optional). -include $(CHIBIOS)/os/rt/rt.mk -include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/port_v7m.mk -# Other files (optional). - -# Define linker script file here -LDSCRIPT= $(STARTUPLD)/TM4C123xH6.ld - -# C sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CSRC = $(ALLCSRC) \ - $(CONFDIR)/portab.c \ - main.c - -# C++ sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CPPSRC = $(ALLCPPSRC) - -# C sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACSRC = - -# C++ sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACPPSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCPPSRC = - -# List ASM source files here -ASMSRC = $(ALLASMSRC) -ASMXSRC = $(ALLXASMSRC) - -INCDIR = $(ALLINC) $(CONFDIR) - -# -# Project, sources and paths -############################################################################## - -############################################################################## -# Compiler settings -# - -MCU = cortex-m4 - -#TRGT = arm-elf- -TRGT = arm-none-eabi- -CC = $(TRGT)gcc -CPPC = $(TRGT)g++ -# Enable loading with g++ only if you need C++ runtime support. -# NOTE: You can use C++ even without C++ support if you are careful. C++ -# runtime support makes code size explode. -LD = $(TRGT)gcc -#LD = $(TRGT)g++ -CP = $(TRGT)objcopy -AS = $(TRGT)gcc -x assembler-with-cpp -AR = $(TRGT)ar -OD = $(TRGT)objdump -SZ = $(TRGT)size -HEX = $(CP) -O ihex -BIN = $(CP) -O binary - -# ARM-specific options here -AOPT = - -# THUMB-specific options here -TOPT = -mthumb -DTHUMB - -# Define C warning options here -CWARN = -Wall -Wextra -Wundef -Wstrict-prototypes - -# Define C++ warning options here -CPPWARN = -Wall -Wextra -Wundef - -# -# Compiler settings -############################################################################## - -############################################################################## -# Start of user section -# - -# List all user C define here, like -D_DEBUG=1 -UDEFS = - -# Define ASM defines here -UADEFS = - -# List all user directories here -UINCDIR = - -# List the user directory to look for the libraries here -ULIBDIR = - -# List all user libraries here -ULIBS = - -# -# End of user defines -############################################################################## - -RULESPATH = $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC -include $(RULESPATH)/rules.mk diff --git a/testhal/TIVA/multi/PAL/Makefile-tm4c1294_launchpad b/testhal/TIVA/multi/PAL/Makefile-tm4c1294_launchpad deleted file mode 100644 index caec0ac..0000000 --- a/testhal/TIVA/multi/PAL/Makefile-tm4c1294_launchpad +++ /dev/null @@ -1,215 +0,0 @@ -############################################################################## -# Build global options -# NOTE: Can be overridden externally. -# - -# Compiler options here. -ifeq ($(USE_OPT),) - USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 -endif - -# C specific options here (added to USE_OPT). -ifeq ($(USE_COPT),) - USE_COPT = -endif - -# C++ specific options here (added to USE_OPT). -ifeq ($(USE_CPPOPT),) - USE_CPPOPT = -fno-rtti -endif - -# Enable this if you want the linker to remove unused code and data -ifeq ($(USE_LINK_GC),) - USE_LINK_GC = yes -endif - -# Linker extra options here. -ifeq ($(USE_LDOPT),) - USE_LDOPT = -endif - -# Enable this if you want link time optimizations (LTO) -ifeq ($(USE_LTO),) - USE_LTO = yes -endif - -# If enabled, this option allows to compile the application in THUMB mode. -ifeq ($(USE_THUMB),) - USE_THUMB = yes -endif - -# Enable this if you want to see the full log while compiling. -ifeq ($(USE_VERBOSE_COMPILE),) - USE_VERBOSE_COMPILE = no -endif - -# If enabled, this option makes the build process faster by not compiling -# modules not used in the current configuration. -ifeq ($(USE_SMART_BUILD),) - USE_SMART_BUILD = yes -endif - -# -# Build global options -############################################################################## - -############################################################################## -# Architecture or project specific options -# - -# Stack size to be allocated to the Cortex-M process stack. This stack is -# the stack used by the main() thread. -ifeq ($(USE_PROCESS_STACKSIZE),) - USE_PROCESS_STACKSIZE = 0x400 -endif - -# Stack size to the allocated to the Cortex-M main/exceptions stack. This -# stack is used for processing interrupts and exceptions. -ifeq ($(USE_EXCEPTIONS_STACKSIZE),) - USE_EXCEPTIONS_STACKSIZE = 0x400 -endif - -# Enables the use of FPU on Cortex-M4 (no, softfp, hard). -ifeq ($(USE_FPU),) - USE_FPU = no -endif - -# -# Architecture or project specific options -############################################################################## - -############################################################################## -# Project, sources and paths -# - -# Define project name here -PROJECT = ch - -# Imported source files and paths -CHIBIOS = ../../../../../ChibiOS-RT -CHIBIOS_CONTRIB = $(CHIBIOS)/../ChibiOS-Contrib -CONFDIR := ./cfg-tm4c1294_launchpad -BUILDDIR := ./build-tm4c1294_launchpad -DEPDIR := ./.dep-tm4c1294_launchpad - -# Licensing files. -include $(CHIBIOS)/os/license/license.mk -# Startup files. -include $(CHIBIOS_CONTRIB)/os/common/startup/ARMCMx/compilers/GCC/mk/startup_tm4c129x.mk -# HAL-OSAL files (optional). -include $(CHIBIOS)/os/hal/hal.mk -include $(CHIBIOS_CONTRIB)/os/hal/ports/TIVA/TM4C129x/platform.mk -include $(CHIBIOS_CONTRIB)/os/hal/boards/TI_TM4C1294_LAUNCHPAD/board.mk -include $(CHIBIOS)/os/hal/osal/rt/osal.mk -# RTOS files (optional). -include $(CHIBIOS)/os/rt/rt.mk -include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/port_v7m.mk -# Other files (optional). - -# Define linker script file here -LDSCRIPT= $(STARTUPLD)/TM4C129xNC.ld - -# C sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CSRC = $(ALLCSRC) \ - $(CONFDIR)/portab.c \ - main.c - -# C++ sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CPPSRC = $(ALLCPPSRC) - -# C sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACSRC = - -# C++ sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACPPSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCPPSRC = - -# List ASM source files here -ASMSRC = $(ALLASMSRC) -ASMXSRC = $(ALLXASMSRC) - -INCDIR = $(ALLINC) $(CONFDIR) - -# -# Project, sources and paths -############################################################################## - -############################################################################## -# Compiler settings -# - -MCU = cortex-m4 - -#TRGT = arm-elf- -TRGT = arm-none-eabi- -CC = $(TRGT)gcc -CPPC = $(TRGT)g++ -# Enable loading with g++ only if you need C++ runtime support. -# NOTE: You can use C++ even without C++ support if you are careful. C++ -# runtime support makes code size explode. -LD = $(TRGT)gcc -#LD = $(TRGT)g++ -CP = $(TRGT)objcopy -AS = $(TRGT)gcc -x assembler-with-cpp -AR = $(TRGT)ar -OD = $(TRGT)objdump -SZ = $(TRGT)size -HEX = $(CP) -O ihex -BIN = $(CP) -O binary - -# ARM-specific options here -AOPT = - -# THUMB-specific options here -TOPT = -mthumb -DTHUMB - -# Define C warning options here -CWARN = -Wall -Wextra -Wundef -Wstrict-prototypes - -# Define C++ warning options here -CPPWARN = -Wall -Wextra -Wundef - -# -# Compiler settings -############################################################################## - -############################################################################## -# Start of user section -# - -# List all user C define here, like -D_DEBUG=1 -UDEFS = - -# Define ASM defines here -UADEFS = - -# List all user directories here -UINCDIR = - -# List the user directory to look for the libraries here -ULIBDIR = - -# List all user libraries here -ULIBS = - -# -# End of user defines -############################################################################## - -RULESPATH = $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC -include $(RULESPATH)/rules.mk diff --git a/testhal/TIVA/multi/PAL/cfg-tm4c123g_launchpad/chconf.h b/testhal/TIVA/multi/PAL/cfg-tm4c123g_launchpad/chconf.h deleted file mode 100644 index e42b74e..0000000 --- a/testhal/TIVA/multi/PAL/cfg-tm4c123g_launchpad/chconf.h +++ /dev/null @@ -1,608 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef CHCONF_H -#define CHCONF_H - -#define _CHIBIOS_RT_CONF_ -#define _CHIBIOS_RT_CONF_VER_5_0_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#define CH_CFG_ST_RESOLUTION 32 - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#define CH_CFG_ST_FREQUENCY 10000 - -/** - * @brief Time intervals data size. - * @note Allowed values are 16, 32 or 64 bits. - */ -#define CH_CFG_INTERVALS_SIZE 32 - -/** - * @brief Time types data size. - * @note Allowed values are 16 or 32 bits. - */ -#define CH_CFG_TIME_TYPES_SIZE 32 - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#define CH_CFG_ST_TIMEDELTA 2 - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#define CH_CFG_TIME_QUANTUM 0 - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#define CH_CFG_MEMCORE_SIZE 0 - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. - */ -#define CH_CFG_NO_IDLE_THREAD FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#define CH_CFG_OPTIMIZE_SPEED TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_TM TRUE - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_REGISTRY TRUE - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_WAITEXIT TRUE - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_SEMAPHORES TRUE - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MUTEXES TRUE - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_CONDVARS TRUE - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_EVENTS TRUE - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MESSAGES TRUE - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_MAILBOXES TRUE - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMCORE TRUE - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#define CH_CFG_USE_HEAP TRUE - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMPOOLS TRUE - -/** - * @brief Objects FIFOs APIs. - * @details If enabled then the objects FIFOs APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_OBJ_FIFOS TRUE - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#define CH_CFG_USE_DYNAMIC TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Objects factory options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Objects Factory APIs. - * @details If enabled then the objects factory APIs are included in the - * kernel. - * - * @note The default is @p FALSE. - */ -#define CH_CFG_USE_FACTORY TRUE - -/** - * @brief Maximum length for object names. - * @details If the specified length is zero then the name is stored by - * pointer but this could have unintended side effects. - */ -#define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8 - -/** - * @brief Enables the registry of generic objects. - */ -#define CH_CFG_FACTORY_OBJECTS_REGISTRY TRUE - -/** - * @brief Enables factory for generic buffers. - */ -#define CH_CFG_FACTORY_GENERIC_BUFFERS TRUE - -/** - * @brief Enables factory for semaphores. - */ -#define CH_CFG_FACTORY_SEMAPHORES TRUE - -/** - * @brief Enables factory for mailboxes. - */ -#define CH_CFG_FACTORY_MAILBOXES TRUE - -/** - * @brief Enables factory for objects FIFOs. - */ -#define CH_CFG_FACTORY_OBJ_FIFOS TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_STATISTICS FALSE - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_SYSTEM_STATE_CHECK TRUE - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_CHECKS TRUE - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_ASSERTS TRUE - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the trace buffer is activated. - * - * @note The default is @p CH_DBG_TRACE_MASK_DISABLED. - */ -#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_ALL - -/** - * @brief Trace buffer entries. - * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is - * different from @p CH_DBG_TRACE_MASK_DISABLED. - */ -#define CH_DBG_TRACE_BUFFER_SIZE 128 - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#define CH_DBG_ENABLE_STACK_CHECK TRUE - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_FILL_THREADS TRUE - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#define CH_DBG_THREADS_PROFILING FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System structure extension. - * @details User fields added to the end of the @p ch_system_t structure. - */ -#define CH_CFG_SYSTEM_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief System initialization hook. - * @details User initialization code added to the @p chSysInit() function - * just before interrupts are enabled globally. - */ -#define CH_CFG_SYSTEM_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p _thread_init() function. - * - * @note It is invoked from within @p _thread_init() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* Context switch code here.*/ \ -} - -/** - * @brief ISR enter hook. - */ -#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ - /* IRQ prologue code here.*/ \ -} - -/** - * @brief ISR exit hook. - */ -#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ - /* IRQ epilogue code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ - /* Idle-enter code here.*/ \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ - /* Idle-leave code here.*/ \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Trace hook. - * @details This hook is invoked each time a new record is written in the - * trace buffer. - */ -#define CH_CFG_TRACE_HOOK(tep) { \ - /* Trace code here.*/ \ -} - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* CHCONF_H */ - -/** @} */ diff --git a/testhal/TIVA/multi/PAL/cfg-tm4c123g_launchpad/halconf.h b/testhal/TIVA/multi/PAL/cfg-tm4c123g_launchpad/halconf.h deleted file mode 100644 index 97f1ec3..0000000 --- a/testhal/TIVA/multi/PAL/cfg-tm4c123g_launchpad/halconf.h +++ /dev/null @@ -1,417 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef HALCONF_H -#define HALCONF_H - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the cryptographic subsystem. - */ -#if !defined(HAL_USE_CRY) || defined(__DOXYGEN__) -#define HAL_USE_CRY FALSE -#endif - -/** - * @brief Enables the DAC subsystem. - */ -#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) -#define HAL_USE_DAC FALSE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the QSPI subsystem. - */ -#if !defined(HAL_USE_QSPI) || defined(__DOXYGEN__) -#define HAL_USE_QSPI FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB FALSE -#endif - -/** - * @brief Enables the WDG subsystem. - */ -#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) -#define HAL_USE_WDG FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/*===========================================================================*/ -/* CRY driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the SW fall-back of the cryptographic driver. - * @details When enabled, this option, activates a fall-back software - * implementation for algorithms not supported by the underlying - * hardware. - * @note Fall-back implementations may not be present for all algorithms. - */ -#if !defined(HAL_CRY_USE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_USE_FALLBACK FALSE -#endif - -/** - * @brief Makes the driver forcibly use the fall-back implementations. - */ -#if !defined(HAL_CRY_ENFORCE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_ENFORCE_FALLBACK FALSE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 16 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SERIAL_USB driver related setting. */ -/*===========================================================================*/ - -/** - * @brief Serial over USB buffers size. - * @details Configuration parameter, the buffer size must be a multiple of - * the USB data endpoint maximum packet size. - * @note The default is 256 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_SIZE 256 -#endif - -/** - * @brief Serial over USB number of buffers. - * @note The default is 2 buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_NUMBER 2 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* UART driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) -#define UART_USE_WAIT FALSE -#endif - -/** - * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define UART_USE_MUTUAL_EXCLUSION FALSE -#endif - -/*===========================================================================*/ -/* USB driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) -#define USB_USE_WAIT FALSE -#endif - -#endif /* HALCONF_H */ - -/** @} */ diff --git a/testhal/TIVA/multi/PAL/cfg-tm4c123g_launchpad/mcuconf.h b/testhal/TIVA/multi/PAL/cfg-tm4c123g_launchpad/mcuconf.h deleted file mode 100644 index f59dcb7..0000000 --- a/testhal/TIVA/multi/PAL/cfg-tm4c123g_launchpad/mcuconf.h +++ /dev/null @@ -1,168 +0,0 @@ -/* - Copyright (C) 2014..2017 Marco Veeneman - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/* - * TM4C123x drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. - * - * IRQ priorities: - * 7...0 Lowest...Highest. - */ - -#define TM4C123x_MCUCONF - -/* - * HAL driver system settings. - */ -#define TIVA_OSCSRC SYSCTL_RCC2_OSCSRC2_MO -#define TIVA_MOSC_ENABLE TRUE -#define TIVA_DIV400_VALUE 1 -#define TIVA_SYSDIV_VALUE 2 -#define TIVA_USESYSDIV_ENABLE FALSE -#define TIVA_SYSDIV2LSB_ENABLE FALSE -#define TIVA_BYPASS_VALUE 0 -#define TIVA_PWM_FIELDS (SYSCTL_RCC_USEPWMDIV | \ - SYSCTL_RCC_PWMDIV_8) - -/* - * PAL driver system settings. - */ -#define TIVA_PAL_GPIOA_IRQ_PRIORITY 3 -#define TIVA_PAL_GPIOB_IRQ_PRIORITY 3 -#define TIVA_PAL_GPIOC_IRQ_PRIORITY 3 -#define TIVA_PAL_GPIOD_IRQ_PRIORITY 3 -#define TIVA_PAL_GPIOE_IRQ_PRIORITY 3 -#define TIVA_PAL_GPIOF_IRQ_PRIORITY 3 - -/* - * GPT driver system settings. - */ -#define TIVA_GPT_USE_GPT0 FALSE -#define TIVA_GPT_USE_GPT1 FALSE -#define TIVA_GPT_USE_GPT2 FALSE -#define TIVA_GPT_USE_GPT3 FALSE -#define TIVA_GPT_USE_GPT4 FALSE -#define TIVA_GPT_USE_GPT5 FALSE -#define TIVA_GPT_USE_WGPT0 FALSE -#define TIVA_GPT_USE_WGPT1 FALSE -#define TIVA_GPT_USE_WGPT2 FALSE -#define TIVA_GPT_USE_WGPT3 FALSE -#define TIVA_GPT_USE_WGPT4 FALSE -#define TIVA_GPT_USE_WGPT5 FALSE - -#define TIVA_GPT_GPT0A_IRQ_PRIORITY 7 -#define TIVA_GPT_GPT1A_IRQ_PRIORITY 7 -#define TIVA_GPT_GPT2A_IRQ_PRIORITY 7 -#define TIVA_GPT_GPT3A_IRQ_PRIORITY 7 -#define TIVA_GPT_GPT4A_IRQ_PRIORITY 7 -#define TIVA_GPT_GPT5A_IRQ_PRIORITY 7 -#define TIVA_GPT_WGPT0A_IRQ_PRIORITY 7 -#define TIVA_GPT_WGPT1A_IRQ_PRIORITY 7 -#define TIVA_GPT_WGPT2A_IRQ_PRIORITY 7 -#define TIVA_GPT_WGPT3A_IRQ_PRIORITY 7 -#define TIVA_GPT_WGPT4A_IRQ_PRIORITY 7 -#define TIVA_GPT_WGPT5A_IRQ_PRIORITY 7 - -/* - * I2C driver system settings. - */ -#define TIVA_I2C_USE_I2C0 FALSE -#define TIVA_I2C_USE_I2C1 FALSE -#define TIVA_I2C_USE_I2C2 FALSE -#define TIVA_I2C_USE_I2C3 FALSE -#define TIVA_I2C_USE_I2C4 FALSE -#define TIVA_I2C_USE_I2C5 FALSE -#define TIVA_I2C_USE_I2C6 FALSE -#define TIVA_I2C_USE_I2C7 FALSE -#define TIVA_I2C_I2C0_IRQ_PRIORITY 4 -#define TIVA_I2C_I2C1_IRQ_PRIORITY 4 -#define TIVA_I2C_I2C2_IRQ_PRIORITY 4 -#define TIVA_I2C_I2C3_IRQ_PRIORITY 4 -#define TIVA_I2C_I2C4_IRQ_PRIORITY 4 -#define TIVA_I2C_I2C5_IRQ_PRIORITY 4 -#define TIVA_I2C_I2C6_IRQ_PRIORITY 4 -#define TIVA_I2C_I2C7_IRQ_PRIORITY 4 - -/* - * PWM driver system settings. - */ -#define TIVA_PWM_USE_PWM0 FALSE -#define TIVA_PWM_USE_PWM1 FALSE -#define TIVA_PWM_PWM0_FAULT_IRQ_PRIORITY 4 -#define TIVA_PWM_PWM0_0_IRQ_PRIORITY 4 -#define TIVA_PWM_PWM0_1_IRQ_PRIORITY 4 -#define TIVA_PWM_PWM0_2_IRQ_PRIORITY 4 -#define TIVA_PWM_PWM0_3_IRQ_PRIORITY 4 -#define TIVA_PWM_PWM1_FAULT_IRQ_PRIORITY 4 -#define TIVA_PWM_PWM1_0_IRQ_PRIORITY 4 -#define TIVA_PWM_PWM1_1_IRQ_PRIORITY 4 -#define TIVA_PWM_PWM1_2_IRQ_PRIORITY 4 -#define TIVA_PWM_PWM1_3_IRQ_PRIORITY 4 - -/* - * SERIAL driver system settings. - */ -#define TIVA_SERIAL_USE_UART0 FALSE -#define TIVA_SERIAL_USE_UART1 FALSE -#define TIVA_SERIAL_USE_UART2 FALSE -#define TIVA_SERIAL_USE_UART3 FALSE -#define TIVA_SERIAL_USE_UART4 FALSE -#define TIVA_SERIAL_USE_UART5 FALSE -#define TIVA_SERIAL_USE_UART6 FALSE -#define TIVA_SERIAL_USE_UART7 FALSE -#define TIVA_SERIAL_UART0_PRIORITY 5 -#define TIVA_SERIAL_UART1_PRIORITY 5 -#define TIVA_SERIAL_UART2_PRIORITY 5 -#define TIVA_SERIAL_UART3_PRIORITY 5 -#define TIVA_SERIAL_UART4_PRIORITY 5 -#define TIVA_SERIAL_UART5_PRIORITY 5 -#define TIVA_SERIAL_UART6_PRIORITY 5 -#define TIVA_SERIAL_UART7_PRIORITY 5 - -/* - * SPI driver system settings. - */ -#define TIVA_SPI_USE_SSI0 FALSE -#define TIVA_SPI_USE_SSI1 FALSE -#define TIVA_SPI_USE_SSI2 FALSE -#define TIVA_SPI_USE_SSI3 FALSE -#define TIVA_SPI_SSI0_RX_UDMA_CHANNEL 10 -#define TIVA_SPI_SSI1_RX_UDMA_CHANNEL 24 -#define TIVA_SPI_SSI2_RX_UDMA_CHANNEL 12 -#define TIVA_SPI_SSI3_RX_UDMA_CHANNEL 14 -#define TIVA_SPI_SSI0_TX_UDMA_CHANNEL 11 -#define TIVA_SPI_SSI1_TX_UDMA_CHANNEL 25 -#define TIVA_SPI_SSI2_TX_UDMA_CHANNEL 13 -#define TIVA_SPI_SSI3_TX_UDMA_CHANNEL 15 -#define TIVA_SPI_SSI0_RX_UDMA_MAPPING 0 -#define TIVA_SPI_SSI1_RX_UDMA_MAPPING 0 -#define TIVA_SPI_SSI2_RX_UDMA_MAPPING 2 -#define TIVA_SPI_SSI3_RX_UDMA_MAPPING 2 -#define TIVA_SPI_SSI0_TX_UDMA_MAPPING 0 -#define TIVA_SPI_SSI1_TX_UDMA_MAPPING 0 -#define TIVA_SPI_SSI2_TX_UDMA_MAPPING 2 -#define TIVA_SPI_SSI3_TX_UDMA_MAPPING 2 - -/* - * ST driver system settings. - */ -#define TIVA_ST_IRQ_PRIORITY 2 -#define TIVA_ST_USE_WIDE_TIMER TRUE -#define TIVA_ST_TIMER_NUMBER 5 -#define TIVA_ST_TIMER_LETTER A diff --git a/testhal/TIVA/multi/PAL/cfg-tm4c123g_launchpad/portab.c b/testhal/TIVA/multi/PAL/cfg-tm4c123g_launchpad/portab.c deleted file mode 100644 index c153bd7..0000000 --- a/testhal/TIVA/multi/PAL/cfg-tm4c123g_launchpad/portab.c +++ /dev/null @@ -1,51 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file portab.c - * @brief Application portability module code. - * - * @addtogroup application_portability - * @{ - */ - -#include "portab.h" - -/*===========================================================================*/ -/* Module local definitions. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Module exported variables. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Module local types. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Module local variables. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Module local functions. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Module exported functions. */ -/*===========================================================================*/ - -/** @} */ diff --git a/testhal/TIVA/multi/PAL/cfg-tm4c123g_launchpad/portab.h b/testhal/TIVA/multi/PAL/cfg-tm4c123g_launchpad/portab.h deleted file mode 100644 index 8e62cee..0000000 --- a/testhal/TIVA/multi/PAL/cfg-tm4c123g_launchpad/portab.h +++ /dev/null @@ -1,74 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file portab.h - * @brief Application portability macros and structures. - * - * @addtogroup application_portability - * @{ - */ - -#ifndef PORTAB_H -#define PORTAB_H - -/*===========================================================================*/ -/* Module constants. */ -/*===========================================================================*/ - -#define PORTAB_LINE_LED1 LINE_LED_RED -#define PORTAB_LINE_LED2 LINE_LED_BLUE -#define PORTAB_LED_OFF PAL_LOW -#define PORTAB_LED_ON PAL_HIGH - -#define PORTAB_LINE_BUTTON LINE_SW1 -#define PORTAB_BUTTON_PRESSED PAL_LOW - -/*===========================================================================*/ -/* Module pre-compile time settings. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Derived constants and error checks. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Module data structures and types. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Module macros. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* External declarations. */ -/*===========================================================================*/ - -#ifdef __cplusplus -extern "C" { -#endif - -#ifdef __cplusplus -} -#endif - -/*===========================================================================*/ -/* Module inline functions. */ -/*===========================================================================*/ - -#endif /* PORTAB_H */ - -/** @} */ diff --git a/testhal/TIVA/multi/PAL/cfg-tm4c1294_launchpad/chconf.h b/testhal/TIVA/multi/PAL/cfg-tm4c1294_launchpad/chconf.h deleted file mode 100644 index 3209f1d..0000000 --- a/testhal/TIVA/multi/PAL/cfg-tm4c1294_launchpad/chconf.h +++ /dev/null @@ -1,608 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef CHCONF_H -#define CHCONF_H - -#define _CHIBIOS_RT_CONF_ -#define _CHIBIOS_RT_CONF_VER_5_0_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#define CH_CFG_ST_RESOLUTION 32 - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#define CH_CFG_ST_FREQUENCY 10000 - -/** - * @brief Time intervals data size. - * @note Allowed values are 16, 32 or 64 bits. - */ -#define CH_CFG_INTERVALS_SIZE 32 - -/** - * @brief Time types data size. - * @note Allowed values are 16 or 32 bits. - */ -#define CH_CFG_TIME_TYPES_SIZE 32 - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#define CH_CFG_ST_TIMEDELTA 0 - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#define CH_CFG_TIME_QUANTUM 0 - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#define CH_CFG_MEMCORE_SIZE 0 - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. - */ -#define CH_CFG_NO_IDLE_THREAD FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#define CH_CFG_OPTIMIZE_SPEED TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_TM TRUE - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_REGISTRY TRUE - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_WAITEXIT TRUE - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_SEMAPHORES TRUE - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MUTEXES TRUE - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_CONDVARS TRUE - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_EVENTS TRUE - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MESSAGES TRUE - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_MAILBOXES TRUE - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMCORE TRUE - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#define CH_CFG_USE_HEAP TRUE - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMPOOLS TRUE - -/** - * @brief Objects FIFOs APIs. - * @details If enabled then the objects FIFOs APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_OBJ_FIFOS TRUE - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#define CH_CFG_USE_DYNAMIC TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Objects factory options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Objects Factory APIs. - * @details If enabled then the objects factory APIs are included in the - * kernel. - * - * @note The default is @p FALSE. - */ -#define CH_CFG_USE_FACTORY TRUE - -/** - * @brief Maximum length for object names. - * @details If the specified length is zero then the name is stored by - * pointer but this could have unintended side effects. - */ -#define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8 - -/** - * @brief Enables the registry of generic objects. - */ -#define CH_CFG_FACTORY_OBJECTS_REGISTRY TRUE - -/** - * @brief Enables factory for generic buffers. - */ -#define CH_CFG_FACTORY_GENERIC_BUFFERS TRUE - -/** - * @brief Enables factory for semaphores. - */ -#define CH_CFG_FACTORY_SEMAPHORES TRUE - -/** - * @brief Enables factory for mailboxes. - */ -#define CH_CFG_FACTORY_MAILBOXES TRUE - -/** - * @brief Enables factory for objects FIFOs. - */ -#define CH_CFG_FACTORY_OBJ_FIFOS TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_STATISTICS FALSE - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_SYSTEM_STATE_CHECK TRUE - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_CHECKS TRUE - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_ASSERTS TRUE - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the trace buffer is activated. - * - * @note The default is @p CH_DBG_TRACE_MASK_DISABLED. - */ -#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_ALL - -/** - * @brief Trace buffer entries. - * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is - * different from @p CH_DBG_TRACE_MASK_DISABLED. - */ -#define CH_DBG_TRACE_BUFFER_SIZE 128 - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#define CH_DBG_ENABLE_STACK_CHECK TRUE - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_FILL_THREADS TRUE - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#define CH_DBG_THREADS_PROFILING FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System structure extension. - * @details User fields added to the end of the @p ch_system_t structure. - */ -#define CH_CFG_SYSTEM_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief System initialization hook. - * @details User initialization code added to the @p chSysInit() function - * just before interrupts are enabled globally. - */ -#define CH_CFG_SYSTEM_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p _thread_init() function. - * - * @note It is invoked from within @p _thread_init() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* Context switch code here.*/ \ -} - -/** - * @brief ISR enter hook. - */ -#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ - /* IRQ prologue code here.*/ \ -} - -/** - * @brief ISR exit hook. - */ -#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ - /* IRQ epilogue code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ - /* Idle-enter code here.*/ \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ - /* Idle-leave code here.*/ \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Trace hook. - * @details This hook is invoked each time a new record is written in the - * trace buffer. - */ -#define CH_CFG_TRACE_HOOK(tep) { \ - /* Trace code here.*/ \ -} - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* CHCONF_H */ - -/** @} */ diff --git a/testhal/TIVA/multi/PAL/cfg-tm4c1294_launchpad/halconf.h b/testhal/TIVA/multi/PAL/cfg-tm4c1294_launchpad/halconf.h deleted file mode 100644 index 97f1ec3..0000000 --- a/testhal/TIVA/multi/PAL/cfg-tm4c1294_launchpad/halconf.h +++ /dev/null @@ -1,417 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef HALCONF_H -#define HALCONF_H - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the cryptographic subsystem. - */ -#if !defined(HAL_USE_CRY) || defined(__DOXYGEN__) -#define HAL_USE_CRY FALSE -#endif - -/** - * @brief Enables the DAC subsystem. - */ -#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) -#define HAL_USE_DAC FALSE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the QSPI subsystem. - */ -#if !defined(HAL_USE_QSPI) || defined(__DOXYGEN__) -#define HAL_USE_QSPI FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB FALSE -#endif - -/** - * @brief Enables the WDG subsystem. - */ -#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) -#define HAL_USE_WDG FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/*===========================================================================*/ -/* CRY driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the SW fall-back of the cryptographic driver. - * @details When enabled, this option, activates a fall-back software - * implementation for algorithms not supported by the underlying - * hardware. - * @note Fall-back implementations may not be present for all algorithms. - */ -#if !defined(HAL_CRY_USE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_USE_FALLBACK FALSE -#endif - -/** - * @brief Makes the driver forcibly use the fall-back implementations. - */ -#if !defined(HAL_CRY_ENFORCE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_ENFORCE_FALLBACK FALSE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 16 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SERIAL_USB driver related setting. */ -/*===========================================================================*/ - -/** - * @brief Serial over USB buffers size. - * @details Configuration parameter, the buffer size must be a multiple of - * the USB data endpoint maximum packet size. - * @note The default is 256 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_SIZE 256 -#endif - -/** - * @brief Serial over USB number of buffers. - * @note The default is 2 buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_NUMBER 2 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* UART driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) -#define UART_USE_WAIT FALSE -#endif - -/** - * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define UART_USE_MUTUAL_EXCLUSION FALSE -#endif - -/*===========================================================================*/ -/* USB driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) -#define USB_USE_WAIT FALSE -#endif - -#endif /* HALCONF_H */ - -/** @} */ diff --git a/testhal/TIVA/multi/PAL/cfg-tm4c1294_launchpad/mcuconf.h b/testhal/TIVA/multi/PAL/cfg-tm4c1294_launchpad/mcuconf.h deleted file mode 100644 index 578d4ab..0000000 --- a/testhal/TIVA/multi/PAL/cfg-tm4c1294_launchpad/mcuconf.h +++ /dev/null @@ -1,152 +0,0 @@ -/* - Copyright (C) 2014..2017 Marco Veeneman - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/* - * TM4C129x drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. - * - * IRQ priorities: - * 7...0 Lowest...Highest. - */ - -#define TM4C129x_MCUCONF - -/* - * HAL driver system settings. - */ -#define TIVA_MOSC_SINGLE_ENDED FALSE -#define TIVA_RSCLKCFG_OSCSRC SYSCTL_RSCLKCFG_OSCSRC_MOSC - -/* - * PAL driver system settings. - */ -#define TIVA_PAL_GPIOA_IRQ_PRIORITY 3 -#define TIVA_PAL_GPIOB_IRQ_PRIORITY 3 -#define TIVA_PAL_GPIOC_IRQ_PRIORITY 3 -#define TIVA_PAL_GPIOD_IRQ_PRIORITY 3 -#define TIVA_PAL_GPIOE_IRQ_PRIORITY 3 -#define TIVA_PAL_GPIOF_IRQ_PRIORITY 3 -#define TIVA_PAL_GPIOG_IRQ_PRIORITY 3 -#define TIVA_PAL_GPIOH_IRQ_PRIORITY 3 -#define TIVA_PAL_GPIOJ_IRQ_PRIORITY 3 -#define TIVA_PAL_GPIOK_IRQ_PRIORITY 3 -#define TIVA_PAL_GPIOL_IRQ_PRIORITY 3 -#define TIVA_PAL_GPIOM_IRQ_PRIORITY 3 -#define TIVA_PAL_GPION_IRQ_PRIORITY 3 -#define TIVA_PAL_GPIOP0_IRQ_PRIORITY 3 -#define TIVA_PAL_GPIOP1_IRQ_PRIORITY 3 -#define TIVA_PAL_GPIOP2_IRQ_PRIORITY 3 -#define TIVA_PAL_GPIOP3_IRQ_PRIORITY 3 -#define TIVA_PAL_GPIOP4_IRQ_PRIORITY 3 -#define TIVA_PAL_GPIOP5_IRQ_PRIORITY 3 -#define TIVA_PAL_GPIOP6_IRQ_PRIORITY 3 -#define TIVA_PAL_GPIOP7_IRQ_PRIORITY 3 -#define TIVA_PAL_GPIOQ0_IRQ_PRIORITY 3 -#define TIVA_PAL_GPIOQ1_IRQ_PRIORITY 3 -#define TIVA_PAL_GPIOQ2_IRQ_PRIORITY 3 -#define TIVA_PAL_GPIOQ3_IRQ_PRIORITY 3 -#define TIVA_PAL_GPIOQ4_IRQ_PRIORITY 3 -#define TIVA_PAL_GPIOQ5_IRQ_PRIORITY 3 -#define TIVA_PAL_GPIOQ6_IRQ_PRIORITY 3 -#define TIVA_PAL_GPIOQ7_IRQ_PRIORITY 3 -#define TIVA_PAL_GPIOR_IRQ_PRIORITY 3 -#define TIVA_PAL_GPIOS_IRQ_PRIORITY 3 -#define TIVA_PAL_GPIOT_IRQ_PRIORITY 3 - -/* - * GPT driver system settings. - */ -#define TIVA_GPT_USE_GPT0 FALSE -#define TIVA_GPT_USE_GPT1 FALSE -#define TIVA_GPT_USE_GPT2 FALSE -#define TIVA_GPT_USE_GPT3 FALSE -#define TIVA_GPT_USE_GPT4 FALSE -#define TIVA_GPT_USE_GPT5 FALSE -#define TIVA_GPT_USE_GPT6 FALSE -#define TIVA_GPT_USE_GPT7 FALSE -#define TIVA_GPT_GPT0A_IRQ_PRIORITY 7 -#define TIVA_GPT_GPT1A_IRQ_PRIORITY 7 -#define TIVA_GPT_GPT2A_IRQ_PRIORITY 7 -#define TIVA_GPT_GPT3A_IRQ_PRIORITY 7 -#define TIVA_GPT_GPT4A_IRQ_PRIORITY 7 -#define TIVA_GPT_GPT5A_IRQ_PRIORITY 7 -#define TIVA_GPT_GPT6A_IRQ_PRIORITY 7 -#define TIVA_GPT_GPT7A_IRQ_PRIORITY 7 - -/* - * I2C driver system settings. - */ -#define TIVA_I2C_USE_I2C0 FALSE -#define TIVA_I2C_USE_I2C1 FALSE -#define TIVA_I2C_USE_I2C2 FALSE -#define TIVA_I2C_USE_I2C3 FALSE -#define TIVA_I2C_USE_I2C4 FALSE -#define TIVA_I2C_USE_I2C5 FALSE -#define TIVA_I2C_USE_I2C6 FALSE -#define TIVA_I2C_USE_I2C7 FALSE -#define TIVA_I2C_USE_I2C8 FALSE -#define TIVA_I2C_USE_I2C9 FALSE -#define TIVA_I2C_I2C0_IRQ_PRIORITY 4 -#define TIVA_I2C_I2C1_IRQ_PRIORITY 4 -#define TIVA_I2C_I2C2_IRQ_PRIORITY 4 -#define TIVA_I2C_I2C3_IRQ_PRIORITY 4 -#define TIVA_I2C_I2C4_IRQ_PRIORITY 4 -#define TIVA_I2C_I2C5_IRQ_PRIORITY 4 -#define TIVA_I2C_I2C6_IRQ_PRIORITY 4 -#define TIVA_I2C_I2C7_IRQ_PRIORITY 4 -#define TIVA_I2C_I2C8_IRQ_PRIORITY 4 -#define TIVA_I2C_I2C9_IRQ_PRIORITY 4 - -/* - * PWM driver system settings. - */ -#define TIVA_PWM_USE_PWM0 FALSE -#define TIVA_PWM_PWM0_FAULT_IRQ_PRIORITY 4 -#define TIVA_PWM_PWM0_0_IRQ_PRIORITY 4 -#define TIVA_PWM_PWM0_1_IRQ_PRIORITY 4 -#define TIVA_PWM_PWM0_2_IRQ_PRIORITY 4 -#define TIVA_PWM_PWM0_3_IRQ_PRIORITY 4 - -/* - * SERIAL driver system settings. - */ -#define TIVA_SERIAL_USE_UART0 FALSE -#define TIVA_SERIAL_USE_UART1 FALSE -#define TIVA_SERIAL_USE_UART2 FALSE -#define TIVA_SERIAL_USE_UART3 FALSE -#define TIVA_SERIAL_USE_UART4 FALSE -#define TIVA_SERIAL_USE_UART5 FALSE -#define TIVA_SERIAL_USE_UART6 FALSE -#define TIVA_SERIAL_USE_UART7 FALSE -#define TIVA_SERIAL_UART0_PRIORITY 5 -#define TIVA_SERIAL_UART1_PRIORITY 5 -#define TIVA_SERIAL_UART2_PRIORITY 5 -#define TIVA_SERIAL_UART3_PRIORITY 5 -#define TIVA_SERIAL_UART4_PRIORITY 5 -#define TIVA_SERIAL_UART5_PRIORITY 5 -#define TIVA_SERIAL_UART6_PRIORITY 5 -#define TIVA_SERIAL_UART7_PRIORITY 5 - -/* - * ST driver system settings. - */ -#define TIVA_ST_IRQ_PRIORITY 2 -#define TIVA_ST_USE_WIDE_TIMER FALSE -#define TIVA_ST_TIMER_NUMBER 5 -#define TIVA_ST_TIMER_LETTER A diff --git a/testhal/TIVA/multi/PAL/cfg-tm4c1294_launchpad/portab.c b/testhal/TIVA/multi/PAL/cfg-tm4c1294_launchpad/portab.c deleted file mode 100644 index c153bd7..0000000 --- a/testhal/TIVA/multi/PAL/cfg-tm4c1294_launchpad/portab.c +++ /dev/null @@ -1,51 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file portab.c - * @brief Application portability module code. - * - * @addtogroup application_portability - * @{ - */ - -#include "portab.h" - -/*===========================================================================*/ -/* Module local definitions. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Module exported variables. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Module local types. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Module local variables. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Module local functions. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Module exported functions. */ -/*===========================================================================*/ - -/** @} */ diff --git a/testhal/TIVA/multi/PAL/cfg-tm4c1294_launchpad/portab.h b/testhal/TIVA/multi/PAL/cfg-tm4c1294_launchpad/portab.h deleted file mode 100644 index 79ae8ec..0000000 --- a/testhal/TIVA/multi/PAL/cfg-tm4c1294_launchpad/portab.h +++ /dev/null @@ -1,74 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file portab.h - * @brief Application portability macros and structures. - * - * @addtogroup application_portability - * @{ - */ - -#ifndef PORTAB_H -#define PORTAB_H - -/*===========================================================================*/ -/* Module constants. */ -/*===========================================================================*/ - -#define PORTAB_LINE_LED1 LINE_LED0 -#define PORTAB_LINE_LED2 LINE_LED1 -#define PORTAB_LED_OFF PAL_HIGH -#define PORTAB_LED_ON PAL_LOW - -#define PORTAB_LINE_BUTTON LINE_SW1 -#define PORTAB_BUTTON_PRESSED PAL_LOW - -/*===========================================================================*/ -/* Module pre-compile time settings. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Derived constants and error checks. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Module data structures and types. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Module macros. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* External declarations. */ -/*===========================================================================*/ - -#ifdef __cplusplus -extern "C" { -#endif - -#ifdef __cplusplus -} -#endif - -/*===========================================================================*/ -/* Module inline functions. */ -/*===========================================================================*/ - -#endif /* PORTAB_H */ - -/** @} */ diff --git a/testhal/TIVA/multi/PAL/cfg/tm4c123g_launchpad/chconf.h b/testhal/TIVA/multi/PAL/cfg/tm4c123g_launchpad/chconf.h new file mode 100644 index 0000000..e42b74e --- /dev/null +++ b/testhal/TIVA/multi/PAL/cfg/tm4c123g_launchpad/chconf.h @@ -0,0 +1,608 @@ +/* + ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file templates/chconf.h + * @brief Configuration file template. + * @details A copy of this file must be placed in each project directory, it + * contains the application specific kernel settings. + * + * @addtogroup config + * @details Kernel related settings and hooks. + * @{ + */ + +#ifndef CHCONF_H +#define CHCONF_H + +#define _CHIBIOS_RT_CONF_ +#define _CHIBIOS_RT_CONF_VER_5_0_ + +/*===========================================================================*/ +/** + * @name System timers settings + * @{ + */ +/*===========================================================================*/ + +/** + * @brief System time counter resolution. + * @note Allowed values are 16 or 32 bits. + */ +#define CH_CFG_ST_RESOLUTION 32 + +/** + * @brief System tick frequency. + * @details Frequency of the system timer that drives the system ticks. This + * setting also defines the system tick time unit. + */ +#define CH_CFG_ST_FREQUENCY 10000 + +/** + * @brief Time intervals data size. + * @note Allowed values are 16, 32 or 64 bits. + */ +#define CH_CFG_INTERVALS_SIZE 32 + +/** + * @brief Time types data size. + * @note Allowed values are 16 or 32 bits. + */ +#define CH_CFG_TIME_TYPES_SIZE 32 + +/** + * @brief Time delta constant for the tick-less mode. + * @note If this value is zero then the system uses the classic + * periodic tick. This value represents the minimum number + * of ticks that is safe to specify in a timeout directive. + * The value one is not valid, timeouts are rounded up to + * this value. + */ +#define CH_CFG_ST_TIMEDELTA 2 + +/** @} */ + +/*===========================================================================*/ +/** + * @name Kernel parameters and options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Round robin interval. + * @details This constant is the number of system ticks allowed for the + * threads before preemption occurs. Setting this value to zero + * disables the preemption for threads with equal priority and the + * round robin becomes cooperative. Note that higher priority + * threads can still preempt, the kernel is always preemptive. + * @note Disabling the round robin preemption makes the kernel more compact + * and generally faster. + * @note The round robin preemption is not supported in tickless mode and + * must be set to zero in that case. + */ +#define CH_CFG_TIME_QUANTUM 0 + +/** + * @brief Managed RAM size. + * @details Size of the RAM area to be managed by the OS. If set to zero + * then the whole available RAM is used. The core memory is made + * available to the heap allocator and/or can be used directly through + * the simplified core memory allocator. + * + * @note In order to let the OS manage the whole RAM the linker script must + * provide the @p __heap_base__ and @p __heap_end__ symbols. + * @note Requires @p CH_CFG_USE_MEMCORE. + */ +#define CH_CFG_MEMCORE_SIZE 0 + +/** + * @brief Idle thread automatic spawn suppression. + * @details When this option is activated the function @p chSysInit() + * does not spawn the idle thread. The application @p main() + * function becomes the idle thread and must implement an + * infinite loop. + */ +#define CH_CFG_NO_IDLE_THREAD FALSE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Performance options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief OS optimization. + * @details If enabled then time efficient rather than space efficient code + * is used when two possible implementations exist. + * + * @note This is not related to the compiler optimization options. + * @note The default is @p TRUE. + */ +#define CH_CFG_OPTIMIZE_SPEED TRUE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Subsystem options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Time Measurement APIs. + * @details If enabled then the time measurement APIs are included in + * the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_TM TRUE + +/** + * @brief Threads registry APIs. + * @details If enabled then the registry APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_REGISTRY TRUE + +/** + * @brief Threads synchronization APIs. + * @details If enabled then the @p chThdWait() function is included in + * the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_WAITEXIT TRUE + +/** + * @brief Semaphores APIs. + * @details If enabled then the Semaphores APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_SEMAPHORES TRUE + +/** + * @brief Semaphores queuing mode. + * @details If enabled then the threads are enqueued on semaphores by + * priority rather than in FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special + * requirements. + * @note Requires @p CH_CFG_USE_SEMAPHORES. + */ +#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE + +/** + * @brief Mutexes APIs. + * @details If enabled then the mutexes APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MUTEXES TRUE + +/** + * @brief Enables recursive behavior on mutexes. + * @note Recursive mutexes are heavier and have an increased + * memory footprint. + * + * @note The default is @p FALSE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE + +/** + * @brief Conditional Variables APIs. + * @details If enabled then the conditional variables APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#define CH_CFG_USE_CONDVARS TRUE + +/** + * @brief Conditional Variables APIs with timeout. + * @details If enabled then the conditional variables APIs with timeout + * specification are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_CONDVARS. + */ +#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE + +/** + * @brief Events Flags APIs. + * @details If enabled then the event flags APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_EVENTS TRUE + +/** + * @brief Events Flags APIs with timeout. + * @details If enabled then the events APIs with timeout specification + * are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_EVENTS. + */ +#define CH_CFG_USE_EVENTS_TIMEOUT TRUE + +/** + * @brief Synchronous Messages APIs. + * @details If enabled then the synchronous messages APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MESSAGES TRUE + +/** + * @brief Synchronous Messages queuing mode. + * @details If enabled then messages are served by priority rather than in + * FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special + * requirements. + * @note Requires @p CH_CFG_USE_MESSAGES. + */ +#define CH_CFG_USE_MESSAGES_PRIORITY FALSE + +/** + * @brief Mailboxes APIs. + * @details If enabled then the asynchronous messages (mailboxes) APIs are + * included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_SEMAPHORES. + */ +#define CH_CFG_USE_MAILBOXES TRUE + +/** + * @brief Core Memory Manager APIs. + * @details If enabled then the core memory manager APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MEMCORE TRUE + +/** + * @brief Heap Allocator APIs. + * @details If enabled then the memory heap allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or + * @p CH_CFG_USE_SEMAPHORES. + * @note Mutexes are recommended. + */ +#define CH_CFG_USE_HEAP TRUE + +/** + * @brief Memory Pools Allocator APIs. + * @details If enabled then the memory pools allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MEMPOOLS TRUE + +/** + * @brief Objects FIFOs APIs. + * @details If enabled then the objects FIFOs APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_OBJ_FIFOS TRUE + +/** + * @brief Dynamic Threads APIs. + * @details If enabled then the dynamic threads creation APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_WAITEXIT. + * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. + */ +#define CH_CFG_USE_DYNAMIC TRUE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Objects factory options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Objects Factory APIs. + * @details If enabled then the objects factory APIs are included in the + * kernel. + * + * @note The default is @p FALSE. + */ +#define CH_CFG_USE_FACTORY TRUE + +/** + * @brief Maximum length for object names. + * @details If the specified length is zero then the name is stored by + * pointer but this could have unintended side effects. + */ +#define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8 + +/** + * @brief Enables the registry of generic objects. + */ +#define CH_CFG_FACTORY_OBJECTS_REGISTRY TRUE + +/** + * @brief Enables factory for generic buffers. + */ +#define CH_CFG_FACTORY_GENERIC_BUFFERS TRUE + +/** + * @brief Enables factory for semaphores. + */ +#define CH_CFG_FACTORY_SEMAPHORES TRUE + +/** + * @brief Enables factory for mailboxes. + */ +#define CH_CFG_FACTORY_MAILBOXES TRUE + +/** + * @brief Enables factory for objects FIFOs. + */ +#define CH_CFG_FACTORY_OBJ_FIFOS TRUE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Debug options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Debug option, kernel statistics. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_STATISTICS FALSE + +/** + * @brief Debug option, system state check. + * @details If enabled the correct call protocol for system APIs is checked + * at runtime. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_SYSTEM_STATE_CHECK TRUE + +/** + * @brief Debug option, parameters checks. + * @details If enabled then the checks on the API functions input + * parameters are activated. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_CHECKS TRUE + +/** + * @brief Debug option, consistency checks. + * @details If enabled then all the assertions in the kernel code are + * activated. This includes consistency checks inside the kernel, + * runtime anomalies and port-defined checks. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_ASSERTS TRUE + +/** + * @brief Debug option, trace buffer. + * @details If enabled then the trace buffer is activated. + * + * @note The default is @p CH_DBG_TRACE_MASK_DISABLED. + */ +#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_ALL + +/** + * @brief Trace buffer entries. + * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is + * different from @p CH_DBG_TRACE_MASK_DISABLED. + */ +#define CH_DBG_TRACE_BUFFER_SIZE 128 + +/** + * @brief Debug option, stack checks. + * @details If enabled then a runtime stack check is performed. + * + * @note The default is @p FALSE. + * @note The stack check is performed in a architecture/port dependent way. + * It may not be implemented or some ports. + * @note The default failure mode is to halt the system with the global + * @p panic_msg variable set to @p NULL. + */ +#define CH_DBG_ENABLE_STACK_CHECK TRUE + +/** + * @brief Debug option, stacks initialization. + * @details If enabled then the threads working area is filled with a byte + * value when a thread is created. This can be useful for the + * runtime measurement of the used stack. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_FILL_THREADS TRUE + +/** + * @brief Debug option, threads profiling. + * @details If enabled then a field is added to the @p thread_t structure that + * counts the system ticks occurred while executing the thread. + * + * @note The default is @p FALSE. + * @note This debug option is not currently compatible with the + * tickless mode. + */ +#define CH_DBG_THREADS_PROFILING FALSE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Kernel hooks + * @{ + */ +/*===========================================================================*/ + +/** + * @brief System structure extension. + * @details User fields added to the end of the @p ch_system_t structure. + */ +#define CH_CFG_SYSTEM_EXTRA_FIELDS \ + /* Add threads custom fields here.*/ + +/** + * @brief System initialization hook. + * @details User initialization code added to the @p chSysInit() function + * just before interrupts are enabled globally. + */ +#define CH_CFG_SYSTEM_INIT_HOOK(tp) { \ + /* Add threads initialization code here.*/ \ +} + +/** + * @brief Threads descriptor structure extension. + * @details User fields added to the end of the @p thread_t structure. + */ +#define CH_CFG_THREAD_EXTRA_FIELDS \ + /* Add threads custom fields here.*/ + +/** + * @brief Threads initialization hook. + * @details User initialization code added to the @p _thread_init() function. + * + * @note It is invoked from within @p _thread_init() and implicitly from all + * the threads creation APIs. + */ +#define CH_CFG_THREAD_INIT_HOOK(tp) { \ + /* Add threads initialization code here.*/ \ +} + +/** + * @brief Threads finalization hook. + * @details User finalization code added to the @p chThdExit() API. + */ +#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ + /* Add threads finalization code here.*/ \ +} + +/** + * @brief Context switch hook. + * @details This hook is invoked just before switching between threads. + */ +#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ + /* Context switch code here.*/ \ +} + +/** + * @brief ISR enter hook. + */ +#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ + /* IRQ prologue code here.*/ \ +} + +/** + * @brief ISR exit hook. + */ +#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ + /* IRQ epilogue code here.*/ \ +} + +/** + * @brief Idle thread enter hook. + * @note This hook is invoked within a critical zone, no OS functions + * should be invoked from here. + * @note This macro can be used to activate a power saving mode. + */ +#define CH_CFG_IDLE_ENTER_HOOK() { \ + /* Idle-enter code here.*/ \ +} + +/** + * @brief Idle thread leave hook. + * @note This hook is invoked within a critical zone, no OS functions + * should be invoked from here. + * @note This macro can be used to deactivate a power saving mode. + */ +#define CH_CFG_IDLE_LEAVE_HOOK() { \ + /* Idle-leave code here.*/ \ +} + +/** + * @brief Idle Loop hook. + * @details This hook is continuously invoked by the idle thread loop. + */ +#define CH_CFG_IDLE_LOOP_HOOK() { \ + /* Idle loop code here.*/ \ +} + +/** + * @brief System tick event hook. + * @details This hook is invoked in the system tick handler immediately + * after processing the virtual timers queue. + */ +#define CH_CFG_SYSTEM_TICK_HOOK() { \ + /* System tick event code here.*/ \ +} + +/** + * @brief System halt hook. + * @details This hook is invoked in case to a system halting error before + * the system is halted. + */ +#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ + /* System halt code here.*/ \ +} + +/** + * @brief Trace hook. + * @details This hook is invoked each time a new record is written in the + * trace buffer. + */ +#define CH_CFG_TRACE_HOOK(tep) { \ + /* Trace code here.*/ \ +} + +/** @} */ + +/*===========================================================================*/ +/* Port-specific settings (override port settings defaulted in chcore.h). */ +/*===========================================================================*/ + +#endif /* CHCONF_H */ + +/** @} */ diff --git a/testhal/TIVA/multi/PAL/cfg/tm4c123g_launchpad/halconf.h b/testhal/TIVA/multi/PAL/cfg/tm4c123g_launchpad/halconf.h new file mode 100644 index 0000000..97f1ec3 --- /dev/null +++ b/testhal/TIVA/multi/PAL/cfg/tm4c123g_launchpad/halconf.h @@ -0,0 +1,417 @@ +/* + ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file templates/halconf.h + * @brief HAL configuration header. + * @details HAL configuration file, this file allows to enable or disable the + * various device drivers from your application. You may also use + * this file in order to override the device drivers default settings. + * + * @addtogroup HAL_CONF + * @{ + */ + +#ifndef HALCONF_H +#define HALCONF_H + +#include "mcuconf.h" + +/** + * @brief Enables the PAL subsystem. + */ +#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) +#define HAL_USE_PAL TRUE +#endif + +/** + * @brief Enables the ADC subsystem. + */ +#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) +#define HAL_USE_ADC FALSE +#endif + +/** + * @brief Enables the CAN subsystem. + */ +#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) +#define HAL_USE_CAN FALSE +#endif + +/** + * @brief Enables the cryptographic subsystem. + */ +#if !defined(HAL_USE_CRY) || defined(__DOXYGEN__) +#define HAL_USE_CRY FALSE +#endif + +/** + * @brief Enables the DAC subsystem. + */ +#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) +#define HAL_USE_DAC FALSE +#endif + +/** + * @brief Enables the EXT subsystem. + */ +#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) +#define HAL_USE_EXT FALSE +#endif + +/** + * @brief Enables the GPT subsystem. + */ +#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) +#define HAL_USE_GPT FALSE +#endif + +/** + * @brief Enables the I2C subsystem. + */ +#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) +#define HAL_USE_I2C FALSE +#endif + +/** + * @brief Enables the I2S subsystem. + */ +#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) +#define HAL_USE_I2S FALSE +#endif + +/** + * @brief Enables the ICU subsystem. + */ +#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) +#define HAL_USE_ICU FALSE +#endif + +/** + * @brief Enables the MAC subsystem. + */ +#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) +#define HAL_USE_MAC FALSE +#endif + +/** + * @brief Enables the MMC_SPI subsystem. + */ +#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) +#define HAL_USE_MMC_SPI FALSE +#endif + +/** + * @brief Enables the PWM subsystem. + */ +#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) +#define HAL_USE_PWM FALSE +#endif + +/** + * @brief Enables the QSPI subsystem. + */ +#if !defined(HAL_USE_QSPI) || defined(__DOXYGEN__) +#define HAL_USE_QSPI FALSE +#endif + +/** + * @brief Enables the RTC subsystem. + */ +#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) +#define HAL_USE_RTC FALSE +#endif + +/** + * @brief Enables the SDC subsystem. + */ +#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) +#define HAL_USE_SDC FALSE +#endif + +/** + * @brief Enables the SERIAL subsystem. + */ +#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL FALSE +#endif + +/** + * @brief Enables the SERIAL over USB subsystem. + */ +#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL_USB FALSE +#endif + +/** + * @brief Enables the SPI subsystem. + */ +#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) +#define HAL_USE_SPI FALSE +#endif + +/** + * @brief Enables the UART subsystem. + */ +#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) +#define HAL_USE_UART FALSE +#endif + +/** + * @brief Enables the USB subsystem. + */ +#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) +#define HAL_USE_USB FALSE +#endif + +/** + * @brief Enables the WDG subsystem. + */ +#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) +#define HAL_USE_WDG FALSE +#endif + +/*===========================================================================*/ +/* ADC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) +#define ADC_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define ADC_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* CAN driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Sleep mode related APIs inclusion switch. + */ +#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) +#define CAN_USE_SLEEP_MODE TRUE +#endif + +/*===========================================================================*/ +/* CRY driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables the SW fall-back of the cryptographic driver. + * @details When enabled, this option, activates a fall-back software + * implementation for algorithms not supported by the underlying + * hardware. + * @note Fall-back implementations may not be present for all algorithms. + */ +#if !defined(HAL_CRY_USE_FALLBACK) || defined(__DOXYGEN__) +#define HAL_CRY_USE_FALLBACK FALSE +#endif + +/** + * @brief Makes the driver forcibly use the fall-back implementations. + */ +#if !defined(HAL_CRY_ENFORCE_FALLBACK) || defined(__DOXYGEN__) +#define HAL_CRY_ENFORCE_FALLBACK FALSE +#endif + +/*===========================================================================*/ +/* I2C driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables the mutual exclusion APIs on the I2C bus. + */ +#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define I2C_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* MAC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables an event sources for incoming packets. + */ +#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) +#define MAC_USE_ZERO_COPY FALSE +#endif + +/** + * @brief Enables an event sources for incoming packets. + */ +#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) +#define MAC_USE_EVENTS TRUE +#endif + +/*===========================================================================*/ +/* MMC_SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + * routines releasing some extra CPU time for the threads with + * lower priority, this may slow down the driver a bit however. + * This option is recommended also if the SPI driver does not + * use a DMA channel and heavily loads the CPU. + */ +#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) +#define MMC_NICE_WAITING TRUE +#endif + +/*===========================================================================*/ +/* SDC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Number of initialization attempts before rejecting the card. + * @note Attempts are performed at 10mS intervals. + */ +#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) +#define SDC_INIT_RETRY 100 +#endif + +/** + * @brief Include support for MMC cards. + * @note MMC support is not yet implemented so this option must be kept + * at @p FALSE. + */ +#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) +#define SDC_MMC_SUPPORT FALSE +#endif + +/** + * @brief Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + * routines releasing some extra CPU time for the threads with + * lower priority, this may slow down the driver a bit however. + */ +#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) +#define SDC_NICE_WAITING TRUE +#endif + +/*===========================================================================*/ +/* SERIAL driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Default bit rate. + * @details Configuration parameter, this is the baud rate selected for the + * default configuration. + */ +#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) +#define SERIAL_DEFAULT_BITRATE 38400 +#endif + +/** + * @brief Serial buffers size. + * @details Configuration parameter, you can change the depth of the queue + * buffers depending on the requirements of your application. + * @note The default is 16 bytes for both the transmission and receive + * buffers. + */ +#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) +#define SERIAL_BUFFERS_SIZE 16 +#endif + +/*===========================================================================*/ +/* SERIAL_USB driver related setting. */ +/*===========================================================================*/ + +/** + * @brief Serial over USB buffers size. + * @details Configuration parameter, the buffer size must be a multiple of + * the USB data endpoint maximum packet size. + * @note The default is 256 bytes for both the transmission and receive + * buffers. + */ +#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) +#define SERIAL_USB_BUFFERS_SIZE 256 +#endif + +/** + * @brief Serial over USB number of buffers. + * @note The default is 2 buffers. + */ +#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) +#define SERIAL_USB_BUFFERS_NUMBER 2 +#endif + +/*===========================================================================*/ +/* SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) +#define SPI_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define SPI_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* UART driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) +#define UART_USE_WAIT FALSE +#endif + +/** + * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define UART_USE_MUTUAL_EXCLUSION FALSE +#endif + +/*===========================================================================*/ +/* USB driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) +#define USB_USE_WAIT FALSE +#endif + +#endif /* HALCONF_H */ + +/** @} */ diff --git a/testhal/TIVA/multi/PAL/cfg/tm4c123g_launchpad/mcuconf.h b/testhal/TIVA/multi/PAL/cfg/tm4c123g_launchpad/mcuconf.h new file mode 100644 index 0000000..f59dcb7 --- /dev/null +++ b/testhal/TIVA/multi/PAL/cfg/tm4c123g_launchpad/mcuconf.h @@ -0,0 +1,168 @@ +/* + Copyright (C) 2014..2017 Marco Veeneman + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/* + * TM4C123x drivers configuration. + * The following settings override the default settings present in + * the various device driver implementation headers. + * Note that the settings for each driver only have effect if the whole + * driver is enabled in halconf.h. + * + * IRQ priorities: + * 7...0 Lowest...Highest. + */ + +#define TM4C123x_MCUCONF + +/* + * HAL driver system settings. + */ +#define TIVA_OSCSRC SYSCTL_RCC2_OSCSRC2_MO +#define TIVA_MOSC_ENABLE TRUE +#define TIVA_DIV400_VALUE 1 +#define TIVA_SYSDIV_VALUE 2 +#define TIVA_USESYSDIV_ENABLE FALSE +#define TIVA_SYSDIV2LSB_ENABLE FALSE +#define TIVA_BYPASS_VALUE 0 +#define TIVA_PWM_FIELDS (SYSCTL_RCC_USEPWMDIV | \ + SYSCTL_RCC_PWMDIV_8) + +/* + * PAL driver system settings. + */ +#define TIVA_PAL_GPIOA_IRQ_PRIORITY 3 +#define TIVA_PAL_GPIOB_IRQ_PRIORITY 3 +#define TIVA_PAL_GPIOC_IRQ_PRIORITY 3 +#define TIVA_PAL_GPIOD_IRQ_PRIORITY 3 +#define TIVA_PAL_GPIOE_IRQ_PRIORITY 3 +#define TIVA_PAL_GPIOF_IRQ_PRIORITY 3 + +/* + * GPT driver system settings. + */ +#define TIVA_GPT_USE_GPT0 FALSE +#define TIVA_GPT_USE_GPT1 FALSE +#define TIVA_GPT_USE_GPT2 FALSE +#define TIVA_GPT_USE_GPT3 FALSE +#define TIVA_GPT_USE_GPT4 FALSE +#define TIVA_GPT_USE_GPT5 FALSE +#define TIVA_GPT_USE_WGPT0 FALSE +#define TIVA_GPT_USE_WGPT1 FALSE +#define TIVA_GPT_USE_WGPT2 FALSE +#define TIVA_GPT_USE_WGPT3 FALSE +#define TIVA_GPT_USE_WGPT4 FALSE +#define TIVA_GPT_USE_WGPT5 FALSE + +#define TIVA_GPT_GPT0A_IRQ_PRIORITY 7 +#define TIVA_GPT_GPT1A_IRQ_PRIORITY 7 +#define TIVA_GPT_GPT2A_IRQ_PRIORITY 7 +#define TIVA_GPT_GPT3A_IRQ_PRIORITY 7 +#define TIVA_GPT_GPT4A_IRQ_PRIORITY 7 +#define TIVA_GPT_GPT5A_IRQ_PRIORITY 7 +#define TIVA_GPT_WGPT0A_IRQ_PRIORITY 7 +#define TIVA_GPT_WGPT1A_IRQ_PRIORITY 7 +#define TIVA_GPT_WGPT2A_IRQ_PRIORITY 7 +#define TIVA_GPT_WGPT3A_IRQ_PRIORITY 7 +#define TIVA_GPT_WGPT4A_IRQ_PRIORITY 7 +#define TIVA_GPT_WGPT5A_IRQ_PRIORITY 7 + +/* + * I2C driver system settings. + */ +#define TIVA_I2C_USE_I2C0 FALSE +#define TIVA_I2C_USE_I2C1 FALSE +#define TIVA_I2C_USE_I2C2 FALSE +#define TIVA_I2C_USE_I2C3 FALSE +#define TIVA_I2C_USE_I2C4 FALSE +#define TIVA_I2C_USE_I2C5 FALSE +#define TIVA_I2C_USE_I2C6 FALSE +#define TIVA_I2C_USE_I2C7 FALSE +#define TIVA_I2C_I2C0_IRQ_PRIORITY 4 +#define TIVA_I2C_I2C1_IRQ_PRIORITY 4 +#define TIVA_I2C_I2C2_IRQ_PRIORITY 4 +#define TIVA_I2C_I2C3_IRQ_PRIORITY 4 +#define TIVA_I2C_I2C4_IRQ_PRIORITY 4 +#define TIVA_I2C_I2C5_IRQ_PRIORITY 4 +#define TIVA_I2C_I2C6_IRQ_PRIORITY 4 +#define TIVA_I2C_I2C7_IRQ_PRIORITY 4 + +/* + * PWM driver system settings. + */ +#define TIVA_PWM_USE_PWM0 FALSE +#define TIVA_PWM_USE_PWM1 FALSE +#define TIVA_PWM_PWM0_FAULT_IRQ_PRIORITY 4 +#define TIVA_PWM_PWM0_0_IRQ_PRIORITY 4 +#define TIVA_PWM_PWM0_1_IRQ_PRIORITY 4 +#define TIVA_PWM_PWM0_2_IRQ_PRIORITY 4 +#define TIVA_PWM_PWM0_3_IRQ_PRIORITY 4 +#define TIVA_PWM_PWM1_FAULT_IRQ_PRIORITY 4 +#define TIVA_PWM_PWM1_0_IRQ_PRIORITY 4 +#define TIVA_PWM_PWM1_1_IRQ_PRIORITY 4 +#define TIVA_PWM_PWM1_2_IRQ_PRIORITY 4 +#define TIVA_PWM_PWM1_3_IRQ_PRIORITY 4 + +/* + * SERIAL driver system settings. + */ +#define TIVA_SERIAL_USE_UART0 FALSE +#define TIVA_SERIAL_USE_UART1 FALSE +#define TIVA_SERIAL_USE_UART2 FALSE +#define TIVA_SERIAL_USE_UART3 FALSE +#define TIVA_SERIAL_USE_UART4 FALSE +#define TIVA_SERIAL_USE_UART5 FALSE +#define TIVA_SERIAL_USE_UART6 FALSE +#define TIVA_SERIAL_USE_UART7 FALSE +#define TIVA_SERIAL_UART0_PRIORITY 5 +#define TIVA_SERIAL_UART1_PRIORITY 5 +#define TIVA_SERIAL_UART2_PRIORITY 5 +#define TIVA_SERIAL_UART3_PRIORITY 5 +#define TIVA_SERIAL_UART4_PRIORITY 5 +#define TIVA_SERIAL_UART5_PRIORITY 5 +#define TIVA_SERIAL_UART6_PRIORITY 5 +#define TIVA_SERIAL_UART7_PRIORITY 5 + +/* + * SPI driver system settings. + */ +#define TIVA_SPI_USE_SSI0 FALSE +#define TIVA_SPI_USE_SSI1 FALSE +#define TIVA_SPI_USE_SSI2 FALSE +#define TIVA_SPI_USE_SSI3 FALSE +#define TIVA_SPI_SSI0_RX_UDMA_CHANNEL 10 +#define TIVA_SPI_SSI1_RX_UDMA_CHANNEL 24 +#define TIVA_SPI_SSI2_RX_UDMA_CHANNEL 12 +#define TIVA_SPI_SSI3_RX_UDMA_CHANNEL 14 +#define TIVA_SPI_SSI0_TX_UDMA_CHANNEL 11 +#define TIVA_SPI_SSI1_TX_UDMA_CHANNEL 25 +#define TIVA_SPI_SSI2_TX_UDMA_CHANNEL 13 +#define TIVA_SPI_SSI3_TX_UDMA_CHANNEL 15 +#define TIVA_SPI_SSI0_RX_UDMA_MAPPING 0 +#define TIVA_SPI_SSI1_RX_UDMA_MAPPING 0 +#define TIVA_SPI_SSI2_RX_UDMA_MAPPING 2 +#define TIVA_SPI_SSI3_RX_UDMA_MAPPING 2 +#define TIVA_SPI_SSI0_TX_UDMA_MAPPING 0 +#define TIVA_SPI_SSI1_TX_UDMA_MAPPING 0 +#define TIVA_SPI_SSI2_TX_UDMA_MAPPING 2 +#define TIVA_SPI_SSI3_TX_UDMA_MAPPING 2 + +/* + * ST driver system settings. + */ +#define TIVA_ST_IRQ_PRIORITY 2 +#define TIVA_ST_USE_WIDE_TIMER TRUE +#define TIVA_ST_TIMER_NUMBER 5 +#define TIVA_ST_TIMER_LETTER A diff --git a/testhal/TIVA/multi/PAL/cfg/tm4c123g_launchpad/portab.c b/testhal/TIVA/multi/PAL/cfg/tm4c123g_launchpad/portab.c new file mode 100644 index 0000000..c153bd7 --- /dev/null +++ b/testhal/TIVA/multi/PAL/cfg/tm4c123g_launchpad/portab.c @@ -0,0 +1,51 @@ +/* + ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file portab.c + * @brief Application portability module code. + * + * @addtogroup application_portability + * @{ + */ + +#include "portab.h" + +/*===========================================================================*/ +/* Module local definitions. */ +/*===========================================================================*/ + +/*===========================================================================*/ +/* Module exported variables. */ +/*===========================================================================*/ + +/*===========================================================================*/ +/* Module local types. */ +/*===========================================================================*/ + +/*===========================================================================*/ +/* Module local variables. */ +/*===========================================================================*/ + +/*===========================================================================*/ +/* Module local functions. */ +/*===========================================================================*/ + +/*===========================================================================*/ +/* Module exported functions. */ +/*===========================================================================*/ + +/** @} */ diff --git a/testhal/TIVA/multi/PAL/cfg/tm4c123g_launchpad/portab.h b/testhal/TIVA/multi/PAL/cfg/tm4c123g_launchpad/portab.h new file mode 100644 index 0000000..8e62cee --- /dev/null +++ b/testhal/TIVA/multi/PAL/cfg/tm4c123g_launchpad/portab.h @@ -0,0 +1,74 @@ +/* + ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file portab.h + * @brief Application portability macros and structures. + * + * @addtogroup application_portability + * @{ + */ + +#ifndef PORTAB_H +#define PORTAB_H + +/*===========================================================================*/ +/* Module constants. */ +/*===========================================================================*/ + +#define PORTAB_LINE_LED1 LINE_LED_RED +#define PORTAB_LINE_LED2 LINE_LED_BLUE +#define PORTAB_LED_OFF PAL_LOW +#define PORTAB_LED_ON PAL_HIGH + +#define PORTAB_LINE_BUTTON LINE_SW1 +#define PORTAB_BUTTON_PRESSED PAL_LOW + +/*===========================================================================*/ +/* Module pre-compile time settings. */ +/*===========================================================================*/ + +/*===========================================================================*/ +/* Derived constants and error checks. */ +/*===========================================================================*/ + +/*===========================================================================*/ +/* Module data structures and types. */ +/*===========================================================================*/ + +/*===========================================================================*/ +/* Module macros. */ +/*===========================================================================*/ + +/*===========================================================================*/ +/* External declarations. */ +/*===========================================================================*/ + +#ifdef __cplusplus +extern "C" { +#endif + +#ifdef __cplusplus +} +#endif + +/*===========================================================================*/ +/* Module inline functions. */ +/*===========================================================================*/ + +#endif /* PORTAB_H */ + +/** @} */ diff --git a/testhal/TIVA/multi/PAL/cfg/tm4c1294_launchpad/chconf.h b/testhal/TIVA/multi/PAL/cfg/tm4c1294_launchpad/chconf.h new file mode 100644 index 0000000..3209f1d --- /dev/null +++ b/testhal/TIVA/multi/PAL/cfg/tm4c1294_launchpad/chconf.h @@ -0,0 +1,608 @@ +/* + ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file templates/chconf.h + * @brief Configuration file template. + * @details A copy of this file must be placed in each project directory, it + * contains the application specific kernel settings. + * + * @addtogroup config + * @details Kernel related settings and hooks. + * @{ + */ + +#ifndef CHCONF_H +#define CHCONF_H + +#define _CHIBIOS_RT_CONF_ +#define _CHIBIOS_RT_CONF_VER_5_0_ + +/*===========================================================================*/ +/** + * @name System timers settings + * @{ + */ +/*===========================================================================*/ + +/** + * @brief System time counter resolution. + * @note Allowed values are 16 or 32 bits. + */ +#define CH_CFG_ST_RESOLUTION 32 + +/** + * @brief System tick frequency. + * @details Frequency of the system timer that drives the system ticks. This + * setting also defines the system tick time unit. + */ +#define CH_CFG_ST_FREQUENCY 10000 + +/** + * @brief Time intervals data size. + * @note Allowed values are 16, 32 or 64 bits. + */ +#define CH_CFG_INTERVALS_SIZE 32 + +/** + * @brief Time types data size. + * @note Allowed values are 16 or 32 bits. + */ +#define CH_CFG_TIME_TYPES_SIZE 32 + +/** + * @brief Time delta constant for the tick-less mode. + * @note If this value is zero then the system uses the classic + * periodic tick. This value represents the minimum number + * of ticks that is safe to specify in a timeout directive. + * The value one is not valid, timeouts are rounded up to + * this value. + */ +#define CH_CFG_ST_TIMEDELTA 0 + +/** @} */ + +/*===========================================================================*/ +/** + * @name Kernel parameters and options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Round robin interval. + * @details This constant is the number of system ticks allowed for the + * threads before preemption occurs. Setting this value to zero + * disables the preemption for threads with equal priority and the + * round robin becomes cooperative. Note that higher priority + * threads can still preempt, the kernel is always preemptive. + * @note Disabling the round robin preemption makes the kernel more compact + * and generally faster. + * @note The round robin preemption is not supported in tickless mode and + * must be set to zero in that case. + */ +#define CH_CFG_TIME_QUANTUM 0 + +/** + * @brief Managed RAM size. + * @details Size of the RAM area to be managed by the OS. If set to zero + * then the whole available RAM is used. The core memory is made + * available to the heap allocator and/or can be used directly through + * the simplified core memory allocator. + * + * @note In order to let the OS manage the whole RAM the linker script must + * provide the @p __heap_base__ and @p __heap_end__ symbols. + * @note Requires @p CH_CFG_USE_MEMCORE. + */ +#define CH_CFG_MEMCORE_SIZE 0 + +/** + * @brief Idle thread automatic spawn suppression. + * @details When this option is activated the function @p chSysInit() + * does not spawn the idle thread. The application @p main() + * function becomes the idle thread and must implement an + * infinite loop. + */ +#define CH_CFG_NO_IDLE_THREAD FALSE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Performance options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief OS optimization. + * @details If enabled then time efficient rather than space efficient code + * is used when two possible implementations exist. + * + * @note This is not related to the compiler optimization options. + * @note The default is @p TRUE. + */ +#define CH_CFG_OPTIMIZE_SPEED TRUE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Subsystem options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Time Measurement APIs. + * @details If enabled then the time measurement APIs are included in + * the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_TM TRUE + +/** + * @brief Threads registry APIs. + * @details If enabled then the registry APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_REGISTRY TRUE + +/** + * @brief Threads synchronization APIs. + * @details If enabled then the @p chThdWait() function is included in + * the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_WAITEXIT TRUE + +/** + * @brief Semaphores APIs. + * @details If enabled then the Semaphores APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_SEMAPHORES TRUE + +/** + * @brief Semaphores queuing mode. + * @details If enabled then the threads are enqueued on semaphores by + * priority rather than in FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special + * requirements. + * @note Requires @p CH_CFG_USE_SEMAPHORES. + */ +#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE + +/** + * @brief Mutexes APIs. + * @details If enabled then the mutexes APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MUTEXES TRUE + +/** + * @brief Enables recursive behavior on mutexes. + * @note Recursive mutexes are heavier and have an increased + * memory footprint. + * + * @note The default is @p FALSE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE + +/** + * @brief Conditional Variables APIs. + * @details If enabled then the conditional variables APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#define CH_CFG_USE_CONDVARS TRUE + +/** + * @brief Conditional Variables APIs with timeout. + * @details If enabled then the conditional variables APIs with timeout + * specification are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_CONDVARS. + */ +#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE + +/** + * @brief Events Flags APIs. + * @details If enabled then the event flags APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_EVENTS TRUE + +/** + * @brief Events Flags APIs with timeout. + * @details If enabled then the events APIs with timeout specification + * are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_EVENTS. + */ +#define CH_CFG_USE_EVENTS_TIMEOUT TRUE + +/** + * @brief Synchronous Messages APIs. + * @details If enabled then the synchronous messages APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MESSAGES TRUE + +/** + * @brief Synchronous Messages queuing mode. + * @details If enabled then messages are served by priority rather than in + * FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special + * requirements. + * @note Requires @p CH_CFG_USE_MESSAGES. + */ +#define CH_CFG_USE_MESSAGES_PRIORITY FALSE + +/** + * @brief Mailboxes APIs. + * @details If enabled then the asynchronous messages (mailboxes) APIs are + * included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_SEMAPHORES. + */ +#define CH_CFG_USE_MAILBOXES TRUE + +/** + * @brief Core Memory Manager APIs. + * @details If enabled then the core memory manager APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MEMCORE TRUE + +/** + * @brief Heap Allocator APIs. + * @details If enabled then the memory heap allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or + * @p CH_CFG_USE_SEMAPHORES. + * @note Mutexes are recommended. + */ +#define CH_CFG_USE_HEAP TRUE + +/** + * @brief Memory Pools Allocator APIs. + * @details If enabled then the memory pools allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MEMPOOLS TRUE + +/** + * @brief Objects FIFOs APIs. + * @details If enabled then the objects FIFOs APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_OBJ_FIFOS TRUE + +/** + * @brief Dynamic Threads APIs. + * @details If enabled then the dynamic threads creation APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_WAITEXIT. + * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. + */ +#define CH_CFG_USE_DYNAMIC TRUE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Objects factory options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Objects Factory APIs. + * @details If enabled then the objects factory APIs are included in the + * kernel. + * + * @note The default is @p FALSE. + */ +#define CH_CFG_USE_FACTORY TRUE + +/** + * @brief Maximum length for object names. + * @details If the specified length is zero then the name is stored by + * pointer but this could have unintended side effects. + */ +#define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8 + +/** + * @brief Enables the registry of generic objects. + */ +#define CH_CFG_FACTORY_OBJECTS_REGISTRY TRUE + +/** + * @brief Enables factory for generic buffers. + */ +#define CH_CFG_FACTORY_GENERIC_BUFFERS TRUE + +/** + * @brief Enables factory for semaphores. + */ +#define CH_CFG_FACTORY_SEMAPHORES TRUE + +/** + * @brief Enables factory for mailboxes. + */ +#define CH_CFG_FACTORY_MAILBOXES TRUE + +/** + * @brief Enables factory for objects FIFOs. + */ +#define CH_CFG_FACTORY_OBJ_FIFOS TRUE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Debug options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Debug option, kernel statistics. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_STATISTICS FALSE + +/** + * @brief Debug option, system state check. + * @details If enabled the correct call protocol for system APIs is checked + * at runtime. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_SYSTEM_STATE_CHECK TRUE + +/** + * @brief Debug option, parameters checks. + * @details If enabled then the checks on the API functions input + * parameters are activated. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_CHECKS TRUE + +/** + * @brief Debug option, consistency checks. + * @details If enabled then all the assertions in the kernel code are + * activated. This includes consistency checks inside the kernel, + * runtime anomalies and port-defined checks. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_ASSERTS TRUE + +/** + * @brief Debug option, trace buffer. + * @details If enabled then the trace buffer is activated. + * + * @note The default is @p CH_DBG_TRACE_MASK_DISABLED. + */ +#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_ALL + +/** + * @brief Trace buffer entries. + * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is + * different from @p CH_DBG_TRACE_MASK_DISABLED. + */ +#define CH_DBG_TRACE_BUFFER_SIZE 128 + +/** + * @brief Debug option, stack checks. + * @details If enabled then a runtime stack check is performed. + * + * @note The default is @p FALSE. + * @note The stack check is performed in a architecture/port dependent way. + * It may not be implemented or some ports. + * @note The default failure mode is to halt the system with the global + * @p panic_msg variable set to @p NULL. + */ +#define CH_DBG_ENABLE_STACK_CHECK TRUE + +/** + * @brief Debug option, stacks initialization. + * @details If enabled then the threads working area is filled with a byte + * value when a thread is created. This can be useful for the + * runtime measurement of the used stack. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_FILL_THREADS TRUE + +/** + * @brief Debug option, threads profiling. + * @details If enabled then a field is added to the @p thread_t structure that + * counts the system ticks occurred while executing the thread. + * + * @note The default is @p FALSE. + * @note This debug option is not currently compatible with the + * tickless mode. + */ +#define CH_DBG_THREADS_PROFILING FALSE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Kernel hooks + * @{ + */ +/*===========================================================================*/ + +/** + * @brief System structure extension. + * @details User fields added to the end of the @p ch_system_t structure. + */ +#define CH_CFG_SYSTEM_EXTRA_FIELDS \ + /* Add threads custom fields here.*/ + +/** + * @brief System initialization hook. + * @details User initialization code added to the @p chSysInit() function + * just before interrupts are enabled globally. + */ +#define CH_CFG_SYSTEM_INIT_HOOK(tp) { \ + /* Add threads initialization code here.*/ \ +} + +/** + * @brief Threads descriptor structure extension. + * @details User fields added to the end of the @p thread_t structure. + */ +#define CH_CFG_THREAD_EXTRA_FIELDS \ + /* Add threads custom fields here.*/ + +/** + * @brief Threads initialization hook. + * @details User initialization code added to the @p _thread_init() function. + * + * @note It is invoked from within @p _thread_init() and implicitly from all + * the threads creation APIs. + */ +#define CH_CFG_THREAD_INIT_HOOK(tp) { \ + /* Add threads initialization code here.*/ \ +} + +/** + * @brief Threads finalization hook. + * @details User finalization code added to the @p chThdExit() API. + */ +#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ + /* Add threads finalization code here.*/ \ +} + +/** + * @brief Context switch hook. + * @details This hook is invoked just before switching between threads. + */ +#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ + /* Context switch code here.*/ \ +} + +/** + * @brief ISR enter hook. + */ +#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ + /* IRQ prologue code here.*/ \ +} + +/** + * @brief ISR exit hook. + */ +#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ + /* IRQ epilogue code here.*/ \ +} + +/** + * @brief Idle thread enter hook. + * @note This hook is invoked within a critical zone, no OS functions + * should be invoked from here. + * @note This macro can be used to activate a power saving mode. + */ +#define CH_CFG_IDLE_ENTER_HOOK() { \ + /* Idle-enter code here.*/ \ +} + +/** + * @brief Idle thread leave hook. + * @note This hook is invoked within a critical zone, no OS functions + * should be invoked from here. + * @note This macro can be used to deactivate a power saving mode. + */ +#define CH_CFG_IDLE_LEAVE_HOOK() { \ + /* Idle-leave code here.*/ \ +} + +/** + * @brief Idle Loop hook. + * @details This hook is continuously invoked by the idle thread loop. + */ +#define CH_CFG_IDLE_LOOP_HOOK() { \ + /* Idle loop code here.*/ \ +} + +/** + * @brief System tick event hook. + * @details This hook is invoked in the system tick handler immediately + * after processing the virtual timers queue. + */ +#define CH_CFG_SYSTEM_TICK_HOOK() { \ + /* System tick event code here.*/ \ +} + +/** + * @brief System halt hook. + * @details This hook is invoked in case to a system halting error before + * the system is halted. + */ +#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ + /* System halt code here.*/ \ +} + +/** + * @brief Trace hook. + * @details This hook is invoked each time a new record is written in the + * trace buffer. + */ +#define CH_CFG_TRACE_HOOK(tep) { \ + /* Trace code here.*/ \ +} + +/** @} */ + +/*===========================================================================*/ +/* Port-specific settings (override port settings defaulted in chcore.h). */ +/*===========================================================================*/ + +#endif /* CHCONF_H */ + +/** @} */ diff --git a/testhal/TIVA/multi/PAL/cfg/tm4c1294_launchpad/halconf.h b/testhal/TIVA/multi/PAL/cfg/tm4c1294_launchpad/halconf.h new file mode 100644 index 0000000..97f1ec3 --- /dev/null +++ b/testhal/TIVA/multi/PAL/cfg/tm4c1294_launchpad/halconf.h @@ -0,0 +1,417 @@ +/* + ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file templates/halconf.h + * @brief HAL configuration header. + * @details HAL configuration file, this file allows to enable or disable the + * various device drivers from your application. You may also use + * this file in order to override the device drivers default settings. + * + * @addtogroup HAL_CONF + * @{ + */ + +#ifndef HALCONF_H +#define HALCONF_H + +#include "mcuconf.h" + +/** + * @brief Enables the PAL subsystem. + */ +#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) +#define HAL_USE_PAL TRUE +#endif + +/** + * @brief Enables the ADC subsystem. + */ +#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) +#define HAL_USE_ADC FALSE +#endif + +/** + * @brief Enables the CAN subsystem. + */ +#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) +#define HAL_USE_CAN FALSE +#endif + +/** + * @brief Enables the cryptographic subsystem. + */ +#if !defined(HAL_USE_CRY) || defined(__DOXYGEN__) +#define HAL_USE_CRY FALSE +#endif + +/** + * @brief Enables the DAC subsystem. + */ +#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) +#define HAL_USE_DAC FALSE +#endif + +/** + * @brief Enables the EXT subsystem. + */ +#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) +#define HAL_USE_EXT FALSE +#endif + +/** + * @brief Enables the GPT subsystem. + */ +#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) +#define HAL_USE_GPT FALSE +#endif + +/** + * @brief Enables the I2C subsystem. + */ +#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) +#define HAL_USE_I2C FALSE +#endif + +/** + * @brief Enables the I2S subsystem. + */ +#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) +#define HAL_USE_I2S FALSE +#endif + +/** + * @brief Enables the ICU subsystem. + */ +#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) +#define HAL_USE_ICU FALSE +#endif + +/** + * @brief Enables the MAC subsystem. + */ +#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) +#define HAL_USE_MAC FALSE +#endif + +/** + * @brief Enables the MMC_SPI subsystem. + */ +#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) +#define HAL_USE_MMC_SPI FALSE +#endif + +/** + * @brief Enables the PWM subsystem. + */ +#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) +#define HAL_USE_PWM FALSE +#endif + +/** + * @brief Enables the QSPI subsystem. + */ +#if !defined(HAL_USE_QSPI) || defined(__DOXYGEN__) +#define HAL_USE_QSPI FALSE +#endif + +/** + * @brief Enables the RTC subsystem. + */ +#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) +#define HAL_USE_RTC FALSE +#endif + +/** + * @brief Enables the SDC subsystem. + */ +#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) +#define HAL_USE_SDC FALSE +#endif + +/** + * @brief Enables the SERIAL subsystem. + */ +#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL FALSE +#endif + +/** + * @brief Enables the SERIAL over USB subsystem. + */ +#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL_USB FALSE +#endif + +/** + * @brief Enables the SPI subsystem. + */ +#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) +#define HAL_USE_SPI FALSE +#endif + +/** + * @brief Enables the UART subsystem. + */ +#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) +#define HAL_USE_UART FALSE +#endif + +/** + * @brief Enables the USB subsystem. + */ +#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) +#define HAL_USE_USB FALSE +#endif + +/** + * @brief Enables the WDG subsystem. + */ +#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) +#define HAL_USE_WDG FALSE +#endif + +/*===========================================================================*/ +/* ADC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) +#define ADC_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define ADC_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* CAN driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Sleep mode related APIs inclusion switch. + */ +#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) +#define CAN_USE_SLEEP_MODE TRUE +#endif + +/*===========================================================================*/ +/* CRY driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables the SW fall-back of the cryptographic driver. + * @details When enabled, this option, activates a fall-back software + * implementation for algorithms not supported by the underlying + * hardware. + * @note Fall-back implementations may not be present for all algorithms. + */ +#if !defined(HAL_CRY_USE_FALLBACK) || defined(__DOXYGEN__) +#define HAL_CRY_USE_FALLBACK FALSE +#endif + +/** + * @brief Makes the driver forcibly use the fall-back implementations. + */ +#if !defined(HAL_CRY_ENFORCE_FALLBACK) || defined(__DOXYGEN__) +#define HAL_CRY_ENFORCE_FALLBACK FALSE +#endif + +/*===========================================================================*/ +/* I2C driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables the mutual exclusion APIs on the I2C bus. + */ +#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define I2C_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* MAC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables an event sources for incoming packets. + */ +#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) +#define MAC_USE_ZERO_COPY FALSE +#endif + +/** + * @brief Enables an event sources for incoming packets. + */ +#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) +#define MAC_USE_EVENTS TRUE +#endif + +/*===========================================================================*/ +/* MMC_SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + * routines releasing some extra CPU time for the threads with + * lower priority, this may slow down the driver a bit however. + * This option is recommended also if the SPI driver does not + * use a DMA channel and heavily loads the CPU. + */ +#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) +#define MMC_NICE_WAITING TRUE +#endif + +/*===========================================================================*/ +/* SDC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Number of initialization attempts before rejecting the card. + * @note Attempts are performed at 10mS intervals. + */ +#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) +#define SDC_INIT_RETRY 100 +#endif + +/** + * @brief Include support for MMC cards. + * @note MMC support is not yet implemented so this option must be kept + * at @p FALSE. + */ +#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) +#define SDC_MMC_SUPPORT FALSE +#endif + +/** + * @brief Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + * routines releasing some extra CPU time for the threads with + * lower priority, this may slow down the driver a bit however. + */ +#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) +#define SDC_NICE_WAITING TRUE +#endif + +/*===========================================================================*/ +/* SERIAL driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Default bit rate. + * @details Configuration parameter, this is the baud rate selected for the + * default configuration. + */ +#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) +#define SERIAL_DEFAULT_BITRATE 38400 +#endif + +/** + * @brief Serial buffers size. + * @details Configuration parameter, you can change the depth of the queue + * buffers depending on the requirements of your application. + * @note The default is 16 bytes for both the transmission and receive + * buffers. + */ +#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) +#define SERIAL_BUFFERS_SIZE 16 +#endif + +/*===========================================================================*/ +/* SERIAL_USB driver related setting. */ +/*===========================================================================*/ + +/** + * @brief Serial over USB buffers size. + * @details Configuration parameter, the buffer size must be a multiple of + * the USB data endpoint maximum packet size. + * @note The default is 256 bytes for both the transmission and receive + * buffers. + */ +#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) +#define SERIAL_USB_BUFFERS_SIZE 256 +#endif + +/** + * @brief Serial over USB number of buffers. + * @note The default is 2 buffers. + */ +#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) +#define SERIAL_USB_BUFFERS_NUMBER 2 +#endif + +/*===========================================================================*/ +/* SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) +#define SPI_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define SPI_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* UART driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) +#define UART_USE_WAIT FALSE +#endif + +/** + * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define UART_USE_MUTUAL_EXCLUSION FALSE +#endif + +/*===========================================================================*/ +/* USB driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) +#define USB_USE_WAIT FALSE +#endif + +#endif /* HALCONF_H */ + +/** @} */ diff --git a/testhal/TIVA/multi/PAL/cfg/tm4c1294_launchpad/mcuconf.h b/testhal/TIVA/multi/PAL/cfg/tm4c1294_launchpad/mcuconf.h new file mode 100644 index 0000000..578d4ab --- /dev/null +++ b/testhal/TIVA/multi/PAL/cfg/tm4c1294_launchpad/mcuconf.h @@ -0,0 +1,152 @@ +/* + Copyright (C) 2014..2017 Marco Veeneman + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/* + * TM4C129x drivers configuration. + * The following settings override the default settings present in + * the various device driver implementation headers. + * Note that the settings for each driver only have effect if the whole + * driver is enabled in halconf.h. + * + * IRQ priorities: + * 7...0 Lowest...Highest. + */ + +#define TM4C129x_MCUCONF + +/* + * HAL driver system settings. + */ +#define TIVA_MOSC_SINGLE_ENDED FALSE +#define TIVA_RSCLKCFG_OSCSRC SYSCTL_RSCLKCFG_OSCSRC_MOSC + +/* + * PAL driver system settings. + */ +#define TIVA_PAL_GPIOA_IRQ_PRIORITY 3 +#define TIVA_PAL_GPIOB_IRQ_PRIORITY 3 +#define TIVA_PAL_GPIOC_IRQ_PRIORITY 3 +#define TIVA_PAL_GPIOD_IRQ_PRIORITY 3 +#define TIVA_PAL_GPIOE_IRQ_PRIORITY 3 +#define TIVA_PAL_GPIOF_IRQ_PRIORITY 3 +#define TIVA_PAL_GPIOG_IRQ_PRIORITY 3 +#define TIVA_PAL_GPIOH_IRQ_PRIORITY 3 +#define TIVA_PAL_GPIOJ_IRQ_PRIORITY 3 +#define TIVA_PAL_GPIOK_IRQ_PRIORITY 3 +#define TIVA_PAL_GPIOL_IRQ_PRIORITY 3 +#define TIVA_PAL_GPIOM_IRQ_PRIORITY 3 +#define TIVA_PAL_GPION_IRQ_PRIORITY 3 +#define TIVA_PAL_GPIOP0_IRQ_PRIORITY 3 +#define TIVA_PAL_GPIOP1_IRQ_PRIORITY 3 +#define TIVA_PAL_GPIOP2_IRQ_PRIORITY 3 +#define TIVA_PAL_GPIOP3_IRQ_PRIORITY 3 +#define TIVA_PAL_GPIOP4_IRQ_PRIORITY 3 +#define TIVA_PAL_GPIOP5_IRQ_PRIORITY 3 +#define TIVA_PAL_GPIOP6_IRQ_PRIORITY 3 +#define TIVA_PAL_GPIOP7_IRQ_PRIORITY 3 +#define TIVA_PAL_GPIOQ0_IRQ_PRIORITY 3 +#define TIVA_PAL_GPIOQ1_IRQ_PRIORITY 3 +#define TIVA_PAL_GPIOQ2_IRQ_PRIORITY 3 +#define TIVA_PAL_GPIOQ3_IRQ_PRIORITY 3 +#define TIVA_PAL_GPIOQ4_IRQ_PRIORITY 3 +#define TIVA_PAL_GPIOQ5_IRQ_PRIORITY 3 +#define TIVA_PAL_GPIOQ6_IRQ_PRIORITY 3 +#define TIVA_PAL_GPIOQ7_IRQ_PRIORITY 3 +#define TIVA_PAL_GPIOR_IRQ_PRIORITY 3 +#define TIVA_PAL_GPIOS_IRQ_PRIORITY 3 +#define TIVA_PAL_GPIOT_IRQ_PRIORITY 3 + +/* + * GPT driver system settings. + */ +#define TIVA_GPT_USE_GPT0 FALSE +#define TIVA_GPT_USE_GPT1 FALSE +#define TIVA_GPT_USE_GPT2 FALSE +#define TIVA_GPT_USE_GPT3 FALSE +#define TIVA_GPT_USE_GPT4 FALSE +#define TIVA_GPT_USE_GPT5 FALSE +#define TIVA_GPT_USE_GPT6 FALSE +#define TIVA_GPT_USE_GPT7 FALSE +#define TIVA_GPT_GPT0A_IRQ_PRIORITY 7 +#define TIVA_GPT_GPT1A_IRQ_PRIORITY 7 +#define TIVA_GPT_GPT2A_IRQ_PRIORITY 7 +#define TIVA_GPT_GPT3A_IRQ_PRIORITY 7 +#define TIVA_GPT_GPT4A_IRQ_PRIORITY 7 +#define TIVA_GPT_GPT5A_IRQ_PRIORITY 7 +#define TIVA_GPT_GPT6A_IRQ_PRIORITY 7 +#define TIVA_GPT_GPT7A_IRQ_PRIORITY 7 + +/* + * I2C driver system settings. + */ +#define TIVA_I2C_USE_I2C0 FALSE +#define TIVA_I2C_USE_I2C1 FALSE +#define TIVA_I2C_USE_I2C2 FALSE +#define TIVA_I2C_USE_I2C3 FALSE +#define TIVA_I2C_USE_I2C4 FALSE +#define TIVA_I2C_USE_I2C5 FALSE +#define TIVA_I2C_USE_I2C6 FALSE +#define TIVA_I2C_USE_I2C7 FALSE +#define TIVA_I2C_USE_I2C8 FALSE +#define TIVA_I2C_USE_I2C9 FALSE +#define TIVA_I2C_I2C0_IRQ_PRIORITY 4 +#define TIVA_I2C_I2C1_IRQ_PRIORITY 4 +#define TIVA_I2C_I2C2_IRQ_PRIORITY 4 +#define TIVA_I2C_I2C3_IRQ_PRIORITY 4 +#define TIVA_I2C_I2C4_IRQ_PRIORITY 4 +#define TIVA_I2C_I2C5_IRQ_PRIORITY 4 +#define TIVA_I2C_I2C6_IRQ_PRIORITY 4 +#define TIVA_I2C_I2C7_IRQ_PRIORITY 4 +#define TIVA_I2C_I2C8_IRQ_PRIORITY 4 +#define TIVA_I2C_I2C9_IRQ_PRIORITY 4 + +/* + * PWM driver system settings. + */ +#define TIVA_PWM_USE_PWM0 FALSE +#define TIVA_PWM_PWM0_FAULT_IRQ_PRIORITY 4 +#define TIVA_PWM_PWM0_0_IRQ_PRIORITY 4 +#define TIVA_PWM_PWM0_1_IRQ_PRIORITY 4 +#define TIVA_PWM_PWM0_2_IRQ_PRIORITY 4 +#define TIVA_PWM_PWM0_3_IRQ_PRIORITY 4 + +/* + * SERIAL driver system settings. + */ +#define TIVA_SERIAL_USE_UART0 FALSE +#define TIVA_SERIAL_USE_UART1 FALSE +#define TIVA_SERIAL_USE_UART2 FALSE +#define TIVA_SERIAL_USE_UART3 FALSE +#define TIVA_SERIAL_USE_UART4 FALSE +#define TIVA_SERIAL_USE_UART5 FALSE +#define TIVA_SERIAL_USE_UART6 FALSE +#define TIVA_SERIAL_USE_UART7 FALSE +#define TIVA_SERIAL_UART0_PRIORITY 5 +#define TIVA_SERIAL_UART1_PRIORITY 5 +#define TIVA_SERIAL_UART2_PRIORITY 5 +#define TIVA_SERIAL_UART3_PRIORITY 5 +#define TIVA_SERIAL_UART4_PRIORITY 5 +#define TIVA_SERIAL_UART5_PRIORITY 5 +#define TIVA_SERIAL_UART6_PRIORITY 5 +#define TIVA_SERIAL_UART7_PRIORITY 5 + +/* + * ST driver system settings. + */ +#define TIVA_ST_IRQ_PRIORITY 2 +#define TIVA_ST_USE_WIDE_TIMER FALSE +#define TIVA_ST_TIMER_NUMBER 5 +#define TIVA_ST_TIMER_LETTER A diff --git a/testhal/TIVA/multi/PAL/cfg/tm4c1294_launchpad/portab.c b/testhal/TIVA/multi/PAL/cfg/tm4c1294_launchpad/portab.c new file mode 100644 index 0000000..c153bd7 --- /dev/null +++ b/testhal/TIVA/multi/PAL/cfg/tm4c1294_launchpad/portab.c @@ -0,0 +1,51 @@ +/* + ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file portab.c + * @brief Application portability module code. + * + * @addtogroup application_portability + * @{ + */ + +#include "portab.h" + +/*===========================================================================*/ +/* Module local definitions. */ +/*===========================================================================*/ + +/*===========================================================================*/ +/* Module exported variables. */ +/*===========================================================================*/ + +/*===========================================================================*/ +/* Module local types. */ +/*===========================================================================*/ + +/*===========================================================================*/ +/* Module local variables. */ +/*===========================================================================*/ + +/*===========================================================================*/ +/* Module local functions. */ +/*===========================================================================*/ + +/*===========================================================================*/ +/* Module exported functions. */ +/*===========================================================================*/ + +/** @} */ diff --git a/testhal/TIVA/multi/PAL/cfg/tm4c1294_launchpad/portab.h b/testhal/TIVA/multi/PAL/cfg/tm4c1294_launchpad/portab.h new file mode 100644 index 0000000..79ae8ec --- /dev/null +++ b/testhal/TIVA/multi/PAL/cfg/tm4c1294_launchpad/portab.h @@ -0,0 +1,74 @@ +/* + ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file portab.h + * @brief Application portability macros and structures. + * + * @addtogroup application_portability + * @{ + */ + +#ifndef PORTAB_H +#define PORTAB_H + +/*===========================================================================*/ +/* Module constants. */ +/*===========================================================================*/ + +#define PORTAB_LINE_LED1 LINE_LED0 +#define PORTAB_LINE_LED2 LINE_LED1 +#define PORTAB_LED_OFF PAL_HIGH +#define PORTAB_LED_ON PAL_LOW + +#define PORTAB_LINE_BUTTON LINE_SW1 +#define PORTAB_BUTTON_PRESSED PAL_LOW + +/*===========================================================================*/ +/* Module pre-compile time settings. */ +/*===========================================================================*/ + +/*===========================================================================*/ +/* Derived constants and error checks. */ +/*===========================================================================*/ + +/*===========================================================================*/ +/* Module data structures and types. */ +/*===========================================================================*/ + +/*===========================================================================*/ +/* Module macros. */ +/*===========================================================================*/ + +/*===========================================================================*/ +/* External declarations. */ +/*===========================================================================*/ + +#ifdef __cplusplus +extern "C" { +#endif + +#ifdef __cplusplus +} +#endif + +/*===========================================================================*/ +/* Module inline functions. */ +/*===========================================================================*/ + +#endif /* PORTAB_H */ + +/** @} */ diff --git a/testhal/TIVA/multi/PAL/make/tm4c123g_launchpad b/testhal/TIVA/multi/PAL/make/tm4c123g_launchpad new file mode 100644 index 0000000..5aba90a --- /dev/null +++ b/testhal/TIVA/multi/PAL/make/tm4c123g_launchpad @@ -0,0 +1,215 @@ +############################################################################## +# Build global options +# NOTE: Can be overridden externally. +# + +# Compiler options here. +ifeq ($(USE_OPT),) + USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 +endif + +# C specific options here (added to USE_OPT). +ifeq ($(USE_COPT),) + USE_COPT = +endif + +# C++ specific options here (added to USE_OPT). +ifeq ($(USE_CPPOPT),) + USE_CPPOPT = -fno-rtti +endif + +# Enable this if you want the linker to remove unused code and data +ifeq ($(USE_LINK_GC),) + USE_LINK_GC = yes +endif + +# Linker extra options here. +ifeq ($(USE_LDOPT),) + USE_LDOPT = +endif + +# Enable this if you want link time optimizations (LTO) +ifeq ($(USE_LTO),) + USE_LTO = yes +endif + +# If enabled, this option allows to compile the application in THUMB mode. +ifeq ($(USE_THUMB),) + USE_THUMB = yes +endif + +# Enable this if you want to see the full log while compiling. +ifeq ($(USE_VERBOSE_COMPILE),) + USE_VERBOSE_COMPILE = no +endif + +# If enabled, this option makes the build process faster by not compiling +# modules not used in the current configuration. +ifeq ($(USE_SMART_BUILD),) + USE_SMART_BUILD = yes +endif + +# +# Build global options +############################################################################## + +############################################################################## +# Architecture or project specific options +# + +# Stack size to be allocated to the Cortex-M process stack. This stack is +# the stack used by the main() thread. +ifeq ($(USE_PROCESS_STACKSIZE),) + USE_PROCESS_STACKSIZE = 0x400 +endif + +# Stack size to the allocated to the Cortex-M main/exceptions stack. This +# stack is used for processing interrupts and exceptions. +ifeq ($(USE_EXCEPTIONS_STACKSIZE),) + USE_EXCEPTIONS_STACKSIZE = 0x400 +endif + +# Enables the use of FPU on Cortex-M4 (no, softfp, hard). +ifeq ($(USE_FPU),) + USE_FPU = no +endif + +# +# Architecture or project specific options +############################################################################## + +############################################################################## +# Project, sources and paths +# + +# Define project name here +PROJECT = ch + +# Imported source files and paths +CHIBIOS = ../../../../../ChibiOS-RT +CHIBIOS_CONTRIB = $(CHIBIOS)/../ChibiOS-Contrib +CONFDIR := ./cfg/tm4c123g_launchpad +BUILDDIR := ./build/tm4c123g_launchpad +DEPDIR := ./.dep/tm4c123g_launchpad + +# Licensing files. +include $(CHIBIOS)/os/license/license.mk +# Startup files. +include $(CHIBIOS_CONTRIB)/os/common/startup/ARMCMx/compilers/GCC/mk/startup_tm4c123x.mk +# HAL-OSAL files (optional). +include $(CHIBIOS)/os/hal/hal.mk +include $(CHIBIOS_CONTRIB)/os/hal/ports/TIVA/TM4C123x/platform.mk +include $(CHIBIOS_CONTRIB)/os/hal/boards/TI_TM4C123G_LAUNCHPAD/board.mk +include $(CHIBIOS)/os/hal/osal/rt/osal.mk +# RTOS files (optional). +include $(CHIBIOS)/os/rt/rt.mk +include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/port_v7m.mk +# Other files (optional). + +# Define linker script file here +LDSCRIPT= $(STARTUPLD)/TM4C123xH6.ld + +# C sources that can be compiled in ARM or THUMB mode depending on the global +# setting. +CSRC = $(ALLCSRC) \ + $(CONFDIR)/portab.c \ + main.c + +# C++ sources that can be compiled in ARM or THUMB mode depending on the global +# setting. +CPPSRC = $(ALLCPPSRC) + +# C sources to be compiled in ARM mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +ACSRC = + +# C++ sources to be compiled in ARM mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +ACPPSRC = + +# C sources to be compiled in THUMB mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +TCSRC = + +# C sources to be compiled in THUMB mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +TCPPSRC = + +# List ASM source files here +ASMSRC = $(ALLASMSRC) +ASMXSRC = $(ALLXASMSRC) + +INCDIR = $(ALLINC) $(CONFDIR) + +# +# Project, sources and paths +############################################################################## + +############################################################################## +# Compiler settings +# + +MCU = cortex-m4 + +#TRGT = arm-elf- +TRGT = arm-none-eabi- +CC = $(TRGT)gcc +CPPC = $(TRGT)g++ +# Enable loading with g++ only if you need C++ runtime support. +# NOTE: You can use C++ even without C++ support if you are careful. C++ +# runtime support makes code size explode. +LD = $(TRGT)gcc +#LD = $(TRGT)g++ +CP = $(TRGT)objcopy +AS = $(TRGT)gcc -x assembler-with-cpp +AR = $(TRGT)ar +OD = $(TRGT)objdump +SZ = $(TRGT)size +HEX = $(CP) -O ihex +BIN = $(CP) -O binary + +# ARM-specific options here +AOPT = + +# THUMB-specific options here +TOPT = -mthumb -DTHUMB + +# Define C warning options here +CWARN = -Wall -Wextra -Wundef -Wstrict-prototypes + +# Define C++ warning options here +CPPWARN = -Wall -Wextra -Wundef + +# +# Compiler settings +############################################################################## + +############################################################################## +# Start of user section +# + +# List all user C define here, like -D_DEBUG=1 +UDEFS = + +# Define ASM defines here +UADEFS = + +# List all user directories here +UINCDIR = + +# List the user directory to look for the libraries here +ULIBDIR = + +# List all user libraries here +ULIBS = + +# +# End of user defines +############################################################################## + +RULESPATH = $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC +include $(RULESPATH)/rules.mk diff --git a/testhal/TIVA/multi/PAL/make/tm4c1294_launchpad b/testhal/TIVA/multi/PAL/make/tm4c1294_launchpad new file mode 100644 index 0000000..82523ed --- /dev/null +++ b/testhal/TIVA/multi/PAL/make/tm4c1294_launchpad @@ -0,0 +1,215 @@ +############################################################################## +# Build global options +# NOTE: Can be overridden externally. +# + +# Compiler options here. +ifeq ($(USE_OPT),) + USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 +endif + +# C specific options here (added to USE_OPT). +ifeq ($(USE_COPT),) + USE_COPT = +endif + +# C++ specific options here (added to USE_OPT). +ifeq ($(USE_CPPOPT),) + USE_CPPOPT = -fno-rtti +endif + +# Enable this if you want the linker to remove unused code and data +ifeq ($(USE_LINK_GC),) + USE_LINK_GC = yes +endif + +# Linker extra options here. +ifeq ($(USE_LDOPT),) + USE_LDOPT = +endif + +# Enable this if you want link time optimizations (LTO) +ifeq ($(USE_LTO),) + USE_LTO = yes +endif + +# If enabled, this option allows to compile the application in THUMB mode. +ifeq ($(USE_THUMB),) + USE_THUMB = yes +endif + +# Enable this if you want to see the full log while compiling. +ifeq ($(USE_VERBOSE_COMPILE),) + USE_VERBOSE_COMPILE = no +endif + +# If enabled, this option makes the build process faster by not compiling +# modules not used in the current configuration. +ifeq ($(USE_SMART_BUILD),) + USE_SMART_BUILD = yes +endif + +# +# Build global options +############################################################################## + +############################################################################## +# Architecture or project specific options +# + +# Stack size to be allocated to the Cortex-M process stack. This stack is +# the stack used by the main() thread. +ifeq ($(USE_PROCESS_STACKSIZE),) + USE_PROCESS_STACKSIZE = 0x400 +endif + +# Stack size to the allocated to the Cortex-M main/exceptions stack. This +# stack is used for processing interrupts and exceptions. +ifeq ($(USE_EXCEPTIONS_STACKSIZE),) + USE_EXCEPTIONS_STACKSIZE = 0x400 +endif + +# Enables the use of FPU on Cortex-M4 (no, softfp, hard). +ifeq ($(USE_FPU),) + USE_FPU = no +endif + +# +# Architecture or project specific options +############################################################################## + +############################################################################## +# Project, sources and paths +# + +# Define project name here +PROJECT = ch + +# Imported source files and paths +CHIBIOS = ../../../../../ChibiOS-RT +CHIBIOS_CONTRIB = $(CHIBIOS)/../ChibiOS-Contrib +CONFDIR := ./cfg/tm4c1294_launchpad +BUILDDIR := ./build/tm4c1294_launchpad +DEPDIR := ./.dep/tm4c1294_launchpad + +# Licensing files. +include $(CHIBIOS)/os/license/license.mk +# Startup files. +include $(CHIBIOS_CONTRIB)/os/common/startup/ARMCMx/compilers/GCC/mk/startup_tm4c129x.mk +# HAL-OSAL files (optional). +include $(CHIBIOS)/os/hal/hal.mk +include $(CHIBIOS_CONTRIB)/os/hal/ports/TIVA/TM4C129x/platform.mk +include $(CHIBIOS_CONTRIB)/os/hal/boards/TI_TM4C1294_LAUNCHPAD/board.mk +include $(CHIBIOS)/os/hal/osal/rt/osal.mk +# RTOS files (optional). +include $(CHIBIOS)/os/rt/rt.mk +include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/port_v7m.mk +# Other files (optional). + +# Define linker script file here +LDSCRIPT= $(STARTUPLD)/TM4C129xNC.ld + +# C sources that can be compiled in ARM or THUMB mode depending on the global +# setting. +CSRC = $(ALLCSRC) \ + $(CONFDIR)/portab.c \ + main.c + +# C++ sources that can be compiled in ARM or THUMB mode depending on the global +# setting. +CPPSRC = $(ALLCPPSRC) + +# C sources to be compiled in ARM mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +ACSRC = + +# C++ sources to be compiled in ARM mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +ACPPSRC = + +# C sources to be compiled in THUMB mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +TCSRC = + +# C sources to be compiled in THUMB mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +TCPPSRC = + +# List ASM source files here +ASMSRC = $(ALLASMSRC) +ASMXSRC = $(ALLXASMSRC) + +INCDIR = $(ALLINC) $(CONFDIR) + +# +# Project, sources and paths +############################################################################## + +############################################################################## +# Compiler settings +# + +MCU = cortex-m4 + +#TRGT = arm-elf- +TRGT = arm-none-eabi- +CC = $(TRGT)gcc +CPPC = $(TRGT)g++ +# Enable loading with g++ only if you need C++ runtime support. +# NOTE: You can use C++ even without C++ support if you are careful. C++ +# runtime support makes code size explode. +LD = $(TRGT)gcc +#LD = $(TRGT)g++ +CP = $(TRGT)objcopy +AS = $(TRGT)gcc -x assembler-with-cpp +AR = $(TRGT)ar +OD = $(TRGT)objdump +SZ = $(TRGT)size +HEX = $(CP) -O ihex +BIN = $(CP) -O binary + +# ARM-specific options here +AOPT = + +# THUMB-specific options here +TOPT = -mthumb -DTHUMB + +# Define C warning options here +CWARN = -Wall -Wextra -Wundef -Wstrict-prototypes + +# Define C++ warning options here +CPPWARN = -Wall -Wextra -Wundef + +# +# Compiler settings +############################################################################## + +############################################################################## +# Start of user section +# + +# List all user C define here, like -D_DEBUG=1 +UDEFS = + +# Define ASM defines here +UADEFS = + +# List all user directories here +UINCDIR = + +# List the user directory to look for the libraries here +ULIBDIR = + +# List all user libraries here +ULIBS = + +# +# End of user defines +############################################################################## + +RULESPATH = $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC +include $(RULESPATH)/rules.mk -- cgit v1.2.3