From 4ac0b638b92db47625d729b938e71b262dadbb43 Mon Sep 17 00:00:00 2001 From: Fabio Utzig Date: Fri, 15 May 2015 20:44:03 -0300 Subject: Add basic PAL driver --- os/hal/ports/NRF51/NRF51822/pal_lld.c | 129 +++++++++++ os/hal/ports/NRF51/NRF51822/pal_lld.h | 373 ++++++++++++++++++++++++++++++++ os/hal/ports/NRF51/NRF51822/platform.mk | 1 + 3 files changed, 503 insertions(+) create mode 100644 os/hal/ports/NRF51/NRF51822/pal_lld.c create mode 100644 os/hal/ports/NRF51/NRF51822/pal_lld.h (limited to 'os/hal/ports') diff --git a/os/hal/ports/NRF51/NRF51822/pal_lld.c b/os/hal/ports/NRF51/NRF51822/pal_lld.c new file mode 100644 index 0000000..ccbe20e --- /dev/null +++ b/os/hal/ports/NRF51/NRF51822/pal_lld.c @@ -0,0 +1,129 @@ +/* + Copyright (C) 2015 Fabio Utzig + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file pal_lld.c + * @brief NRF51822 PAL subsystem low level driver source. + * + * @addtogroup PAL + * @{ + */ + +#include "osal.h" +#include "hal.h" + +#if (HAL_USE_PAL == TRUE) || defined(__DOXYGEN__) + +/*===========================================================================*/ +/* Driver local definitions. */ +/*===========================================================================*/ + +/*===========================================================================*/ +/* Driver exported variables. */ +/*===========================================================================*/ + +/*===========================================================================*/ +/* Driver local variables and types. */ +/*===========================================================================*/ + +/*===========================================================================*/ +/* Driver local functions. */ +/*===========================================================================*/ + +void _pal_lld_setpadmode(uint8_t pad, iomode_t mode) +{ + uint8_t value = 0; + + osalDbgAssert(pad < 32, "invalid pad"); + + switch (mode) { + case PAL_MODE_RESET: + case PAL_MODE_UNCONNECTED: + value = 2; + break; + case PAL_MODE_INPUT: + case PAL_MODE_INPUT_ANALOG: + value = 0; + break; + case PAL_MODE_INPUT_PULLUP: + value = 0xC; + break; + case PAL_MODE_INPUT_PULLDOWN: + value = 4; + break; + case PAL_MODE_OUTPUT_PUSHPULL: + value = 1; + break; + case PAL_MODE_OUTPUT_OPENDRAIN: + value = 0x61; + break; + } + + NRF_GPIO->PIN_CNF[pad] = value; +} + +/*===========================================================================*/ +/* Driver interrupt handlers. */ +/*===========================================================================*/ + +/*===========================================================================*/ +/* Driver exported functions. */ +/*===========================================================================*/ + +/** + * @brief STM32 I/O ports configuration. + * @details Ports A-D(E, F, G, H) clocks enabled. + * + * @param[in] config the STM32 ports configuration + * + * @notapi + */ +void _pal_lld_init(const PALConfig *config) +{ + uint8_t i; + + for (i = 0; i < TOTAL_GPIO_PADS; i++) { + pal_lld_setpadmode(IOPORT1, i, config->pads[i]); + } +} + +/** + * @brief Pads mode setup. + * @details This function programs a pads group belonging to the same port + * with the specified mode. + * + * @param[in] port the port identifier + * @param[in] mask the group mask + * @param[in] mode the mode + * + * @notapi + */ +void _pal_lld_setgroupmode(ioportid_t port, + ioportmask_t mask, + iomode_t mode) +{ + uint8_t i; + + (void)mask; + + for (i = 0; i < TOTAL_GPIO_PADS; i++) { + pal_lld_setpadmode(port, i, mode); + } +} + +#endif /* HAL_USE_PAL == TRUE */ + +/** @} */ diff --git a/os/hal/ports/NRF51/NRF51822/pal_lld.h b/os/hal/ports/NRF51/NRF51822/pal_lld.h new file mode 100644 index 0000000..2383cfe --- /dev/null +++ b/os/hal/ports/NRF51/NRF51822/pal_lld.h @@ -0,0 +1,373 @@ +/* + Copyright (C) 2015 Fabio Utzig + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file pal_lld.h + * @brief NRF51822 PAL subsystem low level driver header. + * + * @addtogroup PAL + * @{ + */ + +#ifndef _PAL_LLD_H_ +#define _PAL_LLD_H_ + +#if (HAL_USE_PAL == TRUE) || defined(__DOXYGEN__) + +/*===========================================================================*/ +/* Unsupported modes and specific modes */ +/*===========================================================================*/ + +/*===========================================================================*/ +/* I/O Ports Types and constants. */ +/*===========================================================================*/ + +#define TOTAL_GPIO_PADS 32 + +/** + * @brief Generic I/O ports static initializer. + * @details An instance of this structure must be passed to @p palInit() at + * system startup time in order to initialized the digital I/O + * subsystem. This represents only the initial setup, specific pads + * or whole ports can be reprogrammed at later time. + * @note Implementations may extend this structure to contain more, + * architecture dependent, fields. + */ +typedef struct { + uint32_t pads[TOTAL_GPIO_PADS]; +} PALConfig; + +/** + * @brief Width, in bits, of an I/O port. + */ +#define PAL_IOPORTS_WIDTH 32U + +/** + * @brief Whole port mask. + * @brief This macro specifies all the valid bits into a port. + */ +#define PAL_WHOLE_PORT ((ioportmask_t)0xFFFFFFFFU) + +/** + * @brief Digital I/O port sized unsigned type. + */ +typedef uint32_t ioportmask_t; + +/** + * @brief Digital I/O modes. + */ +typedef uint32_t iomode_t; + +/** + * @brief Port Identifier. + * @details This type can be a scalar or some kind of pointer, do not make + * any assumption about it, use the provided macros when populating + * variables of this type. + */ +typedef uint32_t ioportid_t; + +/*===========================================================================*/ +/* I/O Ports Identifiers. */ +/*===========================================================================*/ + +/** + * @brief First I/O port identifier. + * @details Low level drivers can define multiple ports, it is suggested to + * use this naming convention. + */ +#define IOPORT1 NRF_GPIO + +/*===========================================================================*/ +/* Implementation, some of the following macros could be implemented as */ +/* functions, if so please put them in pal_lld.c. */ +/*===========================================================================*/ + +void _pal_lld_setpadmode(uint8_t pad, iomode_t mode); + +/** + * @brief Low level PAL subsystem initialization. + * + * @param[in] config architecture-dependent ports configuration + * + * @notapi + */ +#define pal_lld_init(config) _pal_lld_init(config) + +/** + * @brief Reads the physical I/O port states. + * + * @param[in] port port identifier + * @return The port bits. + * + * @notapi + */ +#define pal_lld_readport(port) 0U + +/** + * @brief Reads the output latch. + * @details The purpose of this function is to read back the latched output + * value. + * + * @param[in] port port identifier + * @return The latched logical states. + * + * @notapi + */ +#define pal_lld_readlatch(port) 0U + +/** + * @brief Writes a bits mask on a I/O port. + * + * @param[in] port port identifier + * @param[in] bits bits to be written on the specified port + * + * @notapi + */ +#define pal_lld_writeport(port, bits) \ + do { \ + (void)port; \ + (void)bits; \ + } while (false) + + +/** + * @brief Sets a bits mask on a I/O port. + * @note The @ref PAL provides a default software implementation of this + * functionality, implement this function if can optimize it by using + * special hardware functionalities or special coding. + * + * @param[in] port port identifier + * @param[in] bits bits to be ORed on the specified port + * + * @notapi + */ +#define pal_lld_setport(port, bits) \ + do { \ + (void)port; \ + (void)bits; \ + } while (false) + + +/** + * @brief Clears a bits mask on a I/O port. + * @note The @ref PAL provides a default software implementation of this + * functionality, implement this function if can optimize it by using + * special hardware functionalities or special coding. + * + * @param[in] port port identifier + * @param[in] bits bits to be cleared on the specified port + * + * @notapi + */ +#define pal_lld_clearport(port, bits) \ + do { \ + (void)port; \ + (void)bits; \ + } while (false) + + +/** + * @brief Toggles a bits mask on a I/O port. + * @note The @ref PAL provides a default software implementation of this + * functionality, implement this function if can optimize it by using + * special hardware functionalities or special coding. + * + * @param[in] port port identifier + * @param[in] bits bits to be XORed on the specified port + * + * @notapi + */ +#define pal_lld_toggleport(port, bits) \ + do { \ + (void)port; \ + (void)bits; \ + } while (false) + + +/** + * @brief Reads a group of bits. + * @note The @ref PAL provides a default software implementation of this + * functionality, implement this function if can optimize it by using + * special hardware functionalities or special coding. + * + * @param[in] port port identifier + * @param[in] mask group mask + * @param[in] offset group bit offset within the port + * @return The group logical states. + * + * @notapi + */ +#define pal_lld_readgroup(port, mask, offset) 0U + +/** + * @brief Writes a group of bits. + * @note The @ref PAL provides a default software implementation of this + * functionality, implement this function if can optimize it by using + * special hardware functionalities or special coding. + * + * @param[in] port port identifier + * @param[in] mask group mask + * @param[in] offset group bit offset within the port + * @param[in] bits bits to be written. Values exceeding the group width + * are masked. + * + * @notapi + */ +#define pal_lld_writegroup(port, mask, offset, bits) \ + do { \ + (void)port; \ + (void)mask; \ + (void)offset; \ + (void)bits; \ + } while (false) + +/** + * @brief Pads group mode setup. + * @details This function programs a pads group belonging to the same port + * with the specified mode. + * @note Programming an unknown or unsupported mode is silently ignored. + * + * @param[in] port port identifier + * @param[in] mask group mask + * @param[in] offset group bit offset within the port + * @param[in] mode group mode + * + * @notapi + */ +#define pal_lld_setgroupmode(port, mask, offset, mode) \ + _pal_lld_setgroupmode(port, mask << offset, mode) + +/** + * @brief Reads a logical state from an I/O pad. + * @note The @ref PAL provides a default software implementation of this + * functionality, implement this function if can optimize it by using + * special hardware functionalities or special coding. + * + * @param[in] port port identifier + * @param[in] pad pad number within the port + * @return The logical state. + * @retval PAL_LOW low logical state. + * @retval PAL_HIGH high logical state. + * + * @notapi + */ +#define pal_lld_readpad(port, pad) PAL_LOW + +/** + * @brief Writes a logical state on an output pad. + * @note This function is not meant to be invoked directly by the + * application code. + * @note The @ref PAL provides a default software implementation of this + * functionality, implement this function if can optimize it by using + * special hardware functionalities or special coding. + * + * @param[in] port port identifier + * @param[in] pad pad number within the port + * @param[in] bit logical value, the value must be @p PAL_LOW or + * @p PAL_HIGH + * + * @notapi + */ +#define pal_lld_writepad(port, pad, bit) \ + do { \ + (void)port; \ + (void)pad; \ + (void)bit; \ + } while (false) + +/** + * @brief Sets a pad logical state to @p PAL_HIGH. + * @note The @ref PAL provides a default software implementation of this + * functionality, implement this function if can optimize it by using + * special hardware functionalities or special coding. + * + * @param[in] port port identifier + * @param[in] pad pad number within the port + * + * @notapi + */ +#define pal_lld_setpad(port, pad) (NRF_GPIO->OUTSET = (uint32_t) 1 << (pad)) + +/** + * @brief Clears a pad logical state to @p PAL_LOW. + * @note The @ref PAL provides a default software implementation of this + * functionality, implement this function if can optimize it by using + * special hardware functionalities or special coding. + * + * @param[in] port port identifier + * @param[in] pad pad number within the port + * + * @notapi + */ +#define pal_lld_clearpad(port, pad) (NRF_GPIO->OUTCLR = (uint32_t) 1 << (pad)) + +/** + * @brief Toggles a pad logical state. + * @note The @ref PAL provides a default software implementation of this + * functionality, implement this function if can optimize it by using + * special hardware functionalities or special coding. + * + * @param[in] port port identifier + * @param[in] pad pad number within the port + * + * @notapi + */ +#define pal_lld_togglepad(port, pad) \ + do { \ + uint8_t bit = (NRF_GPIO->IN >> (pad)) & 1; \ + if (bit) \ + NRF_GPIO->OUTCLR = 1 << (pad); \ + else \ + NRF_GPIO->OUTSET = 1 << (pad); \ + } while (0) + + +/** + * @brief Pad mode setup. + * @details This function programs a pad with the specified mode. + * @note The @ref PAL provides a default software implementation of this + * functionality, implement this function if can optimize it by using + * special hardware functionalities or special coding. + * @note Programming an unknown or unsupported mode is silently ignored. + * + * @param[in] port port identifier + * @param[in] pad pad number within the port + * @param[in] mode pad mode + * + * @notapi + */ +#define pal_lld_setpadmode(port, pad, mode) _pal_lld_setpadmode(pad, mode) + +#if !defined(__DOXYGEN__) +extern const PALConfig pal_default_config; +#endif + +#ifdef __cplusplus +extern "C" { +#endif + void _pal_lld_init(const PALConfig *config); + void _pal_lld_setgroupmode(ioportid_t port, + ioportmask_t mask, + iomode_t mode); +#ifdef __cplusplus +} +#endif + +#endif /* HAL_USE_PAL == TRUE */ + +#endif /* _PAL_LLD_H_ */ + +/** @} */ diff --git a/os/hal/ports/NRF51/NRF51822/platform.mk b/os/hal/ports/NRF51/NRF51822/platform.mk index c905684..10aad23 100644 --- a/os/hal/ports/NRF51/NRF51822/platform.mk +++ b/os/hal/ports/NRF51/NRF51822/platform.mk @@ -1,6 +1,7 @@ # List of all the NRF51x platform files. PLATFORMSRC = ${CHIBIOS}/os/hal/ports/common/ARMCMx/nvic.c \ ${CHIBIOS}/community/os/hal/ports/NRF51/NRF51822/hal_lld.c \ + ${CHIBIOS}/community/os/hal/ports/NRF51/NRF51822/pal_lld.c \ ${CHIBIOS}/community/os/hal/ports/NRF51/NRF51822/serial_lld.c \ ${CHIBIOS}/community/os/hal/ports/NRF51/NRF51822/st_lld.c -- cgit v1.2.3