From d10aa9e7a136e41377f40a774fdf3bffb59b358b Mon Sep 17 00:00:00 2001
From: marcoveeneman <marco-veeneman@hotmail.com>
Date: Sun, 30 Oct 2016 14:33:58 +0100
Subject: Defined lines in board files.

---
 os/hal/boards/TI_TM4C123G_LAUNCHPAD/board.h | 18 ++++++++++++++++++
 os/hal/boards/TI_TM4C1294_LAUNCHPAD/board.h | 14 ++++++++++++++
 2 files changed, 32 insertions(+)

(limited to 'os/hal/boards')

diff --git a/os/hal/boards/TI_TM4C123G_LAUNCHPAD/board.h b/os/hal/boards/TI_TM4C123G_LAUNCHPAD/board.h
index a59235a..c337e21 100644
--- a/os/hal/boards/TI_TM4C123G_LAUNCHPAD/board.h
+++ b/os/hal/boards/TI_TM4C123G_LAUNCHPAD/board.h
@@ -94,6 +94,24 @@
 #define GPIOF_PIN6              6
 #define GPIOF_PIN7              7
 
+/*
+ * IO lines assignments.
+ */
+#define LINE_UART0_RX           PAL_LINE(GPIOA, 0U)
+#define LINE_UART0_TX           PAL_LINE(GPIOA, 1U)
+#define LINE_SSI0_CLK           PAL_LINE(GPIOA, 2U)
+#define LINE_SSI0_RX            PAL_LINE(GPIOA, 4U)
+#define LINE_SSI0_TX            PAL_LINE(GPIOA, 5U)
+
+#define LINE_I2C0_SCL           PAL_LINE(GPIOB, 2U)
+#define LINE_I2C0_SDA           PAL_LINE(GPIOB, 3U)
+
+#define LINE_SW2                PAL_LINE(GPIOF, 0U)
+#define LINE_LED_RED            PAL_LINE(GPIOF, 1U)
+#define LINE_LED_BLUE           PAL_LINE(GPIOF, 2U)
+#define LINE_LED_GREEN          PAL_LINE(GPIOF, 3U)
+#define LINE_SW1                PAL_LINE(GPIOF, 4U)
+
 /*
  * I/O ports initial setup, this configuration is established soon after reset
  * in the initialization code.
diff --git a/os/hal/boards/TI_TM4C1294_LAUNCHPAD/board.h b/os/hal/boards/TI_TM4C1294_LAUNCHPAD/board.h
index 9012f7c..982fb1b 100644
--- a/os/hal/boards/TI_TM4C1294_LAUNCHPAD/board.h
+++ b/os/hal/boards/TI_TM4C1294_LAUNCHPAD/board.h
@@ -183,6 +183,20 @@
 #define GPIOQ_PIN6              6
 #define GPIOQ_PIN7              7
 
+/*
+ * IO lines assignments.
+ */
+#define LINE_UART0_RX           PAL_LINE(GPIOA, 0U)
+#define LINE_UART0_TX           PAL_LINE(GPIOA, 1U)
+
+#define LINE_LED0               PAL_LINE(GPIOF, 0U)
+#define LINE_LED1               PAL_LINE(GPIOF, 4U)
+
+#define LINE_LED2               PAL_LINE(GPION, 0U)
+#define LINE_LED3               PAL_LINE(GPION, 1U)
+
+#define LINE_SW1                PAL_LINE(GPIOJ, 0U)
+
 /*
  * I/O ports initial setup, this configuration is established soon after reset
  * in the initialization code.
-- 
cgit v1.2.3