From c63d6a590810570aa1dfec2d07f5bac1f8d698ad Mon Sep 17 00:00:00 2001 From: Fabio Utzig Date: Tue, 15 Mar 2016 22:57:55 -0300 Subject: [KINETIS] Add remaining demos and fix configs --- demos/KINETIS/RT-FREEDOM-KL25Z-EXT/mcuconf.h | 149 +++++++++++++++++++++++++++ 1 file changed, 149 insertions(+) create mode 100644 demos/KINETIS/RT-FREEDOM-KL25Z-EXT/mcuconf.h (limited to 'demos/KINETIS/RT-FREEDOM-KL25Z-EXT/mcuconf.h') diff --git a/demos/KINETIS/RT-FREEDOM-KL25Z-EXT/mcuconf.h b/demos/KINETIS/RT-FREEDOM-KL25Z-EXT/mcuconf.h new file mode 100644 index 0000000..da7ba95 --- /dev/null +++ b/demos/KINETIS/RT-FREEDOM-KL25Z-EXT/mcuconf.h @@ -0,0 +1,149 @@ +/* + ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +#ifndef _MCUCONF_H_ +#define _MCUCONF_H_ + +#define KL2x_MCUCONF + +/* + * HAL driver system settings. + */ + +/* Select the MCU clocking mode below by enabling the appropriate block. */ + +/* FEI mode */ +#if 0 +#define KINETIS_MCG_MODE KINETIS_MCG_MODE_FEI +#define KINETIS_SYSCLK_FREQUENCY 21000000UL +#endif /* 0 */ + +/* FEE mode - 24 MHz with external 32.768 kHz crystal */ +#if 0 +#define KINETIS_MCG_MODE KINETIS_MCG_MODE_FEE +#define KINETIS_MCG_FLL_DMX32 1 /* Fine-tune for 32.768 kHz */ +#define KINETIS_MCG_FLL_DRS 0 /* 732x FLL factor */ +#define KINETIS_MCG_FLL_OUTDIV1 1 /* Divide 48 MHz FLL by 1 => 24 MHz */ +#define KINETIS_MCG_FLL_OUTDIV4 2 /* Divide OUTDIV1 output by 2 => 12 MHz */ +#define KINETIS_SYSCLK_FREQUENCY 23986176UL /* 32.768 kHz*732 (~24 MHz) */ +#define KINETIS_UART0_CLOCK_FREQ (32768 * 732) /* FLL output */ +#define KINETIS_UART0_CLOCK_SRC 1 /* Select FLL clock */ +#define KINETIS_BUSCLK_FREQUENCY (KINETIS_SYSCLK_FREQUENCY / KINETIS_MCG_FLL_OUTDIV4) +#endif /* 0 */ + +/* FEE mode - 48 MHz */ +#if 0 +#define KINETIS_MCG_MODE KINETIS_MCG_MODE_FEE +#define KINETIS_MCG_FLL_DMX32 1 /* Fine-tune for 32.768 kHz */ +#define KINETIS_MCG_FLL_DRS 1 /* 1464x FLL factor */ +#define KINETIS_MCG_FLL_OUTDIV1 1 /* Divide 48 MHz FLL by 1 => 48 MHz */ +#define KINETIS_MCG_FLL_OUTDIV4 2 /* Divide OUTDIV1 output by 2 => 24 MHz */ +#define KINETIS_SYSCLK_FREQUENCY 47972352UL /* 32.768 kHz * 1464 (~48 MHz) */ +#endif /* 0 */ + +/* + * SERIAL driver system settings. + */ +#define KINETIS_SERIAL_USE_UART0 TRUE + +/* + * EXTI driver system settings. + */ +#define KINETIS_EXTI_NUM_CHANNELS 1 +#define KINETIS_EXT_PORTA_IRQ_PRIORITY 3 +#define KINETIS_EXT_PORTB_IRQ_PRIORITY 3 +#define KINETIS_EXT_PORTC_IRQ_PRIORITY 3 +#define KINETIS_EXT_PORTD_IRQ_PRIORITY 3 +#define KINETIS_EXT_PORTE_IRQ_PRIORITY 3 + +/* + * Processor specific widths of each port. + * Smaller numbers can be used if only lower pins in a port are being used to + * generate interrupts. Can be set to 0 if a port is unused. + */ + + +#if 0 +/* MK20 48pin */ +#define KINETIS_EXT_PORTA_WIDTH 20 +#define KINETIS_EXT_PORTB_WIDTH 18 +#define KINETIS_EXT_PORTC_WIDTH 8 +#define KINETIS_EXT_PORTD_WIDTH 8 +#define KINETIS_EXT_PORTE_WIDTH 0 +#endif + +#if 0 +/* MK20 64pin */ +#define KINETIS_EXT_PORTA_WIDTH 20 +#define KINETIS_EXT_PORTB_WIDTH 20 +#define KINETIS_EXT_PORTC_WIDTH 12 +#define KINETIS_EXT_PORTD_WIDTH 8 +#define KINETIS_EXT_PORTE_WIDTH 2 +#endif + +#if 0 +/* MK20 144pin */ +#define KINETIS_EXT_PORTA_WIDTH 30 +#define KINETIS_EXT_PORTB_WIDTH 24 +#define KINETIS_EXT_PORTC_WIDTH 20 +#define KINETIS_EXT_PORTD_WIDTH 16 +#define KINETIS_EXT_PORTE_WIDTH 13 +#endif + + +#if 0 +/* KL25 32pin */ +#define KINETIS_EXT_PORTA_WIDTH 21 +#define KINETIS_EXT_PORTD_WIDTH 8 +#endif + +#if 0 +/* KL25 48pin */ +#define KINETIS_EXT_PORTA_WIDTH 21 +#define KINETIS_EXT_PORTD_WIDTH 8 +#endif + +#if 0 +/* KL25 64pin */ +#define KINETIS_EXT_PORTA_WIDTH 21 +#define KINETIS_EXT_PORTD_WIDTH 8 +#endif + +/* KL25 80pin */ +#define KINETIS_EXT_PORTA_WIDTH 21 +#define KINETIS_EXT_PORTD_WIDTH 8 + +#ifndef KINETIS_EXT_PORTA_WIDTH +#define KINETIS_EXT_PORTA_WIDTH 0 +#endif + +#ifndef KINETIS_EXT_PORTB_WIDTH +#define KINETIS_EXT_PORTB_WIDTH 0 +#endif + +#ifndef KINETIS_EXT_PORTC_WIDTH +#define KINETIS_EXT_PORTC_WIDTH 0 +#endif + +#ifndef KINETIS_EXT_PORTD_WIDTH +#define KINETIS_EXT_PORTD_WIDTH 0 +#endif + +#ifndef KINETIS_EXT_PORTE_WIDTH +#define KINETIS_EXT_PORTE_WIDTH 0 +#endif + +#endif /* _MCUCONF_H_ */ -- cgit v1.2.3