From b54e6ce1bc2eb1b58a356c51beadc45d942047f3 Mon Sep 17 00:00:00 2001 From: Fabien Poussin Date: Wed, 2 Oct 2019 13:55:40 +0200 Subject: Kinetis demos --- demos/KINETIS/RT-FREEDOM-K20D50M-EXT/mcuconf.h | 123 ------------------------- 1 file changed, 123 deletions(-) delete mode 100644 demos/KINETIS/RT-FREEDOM-K20D50M-EXT/mcuconf.h (limited to 'demos/KINETIS/RT-FREEDOM-K20D50M-EXT/mcuconf.h') diff --git a/demos/KINETIS/RT-FREEDOM-K20D50M-EXT/mcuconf.h b/demos/KINETIS/RT-FREEDOM-K20D50M-EXT/mcuconf.h deleted file mode 100644 index 4a1adfc..0000000 --- a/demos/KINETIS/RT-FREEDOM-K20D50M-EXT/mcuconf.h +++ /dev/null @@ -1,123 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef _MCUCONF_H_ -#define _MCUCONF_H_ - -#define K20x_MCUCONF - -/* - * HAL driver system settings. - */ - -/* Select the MCU clocking mode below by enabling the appropriate block. */ - -/* Enable clock initialization by HAL */ -#define KINETIS_NO_INIT FALSE - -/* PEE mode - external (8 MHz) crystal with PLL for 48 MHz core/system clock. */ -#if 1 -#define KINETIS_MCG_MODE KINETIS_MCG_MODE_PEE -#define KINETIS_PLLCLK_FREQUENCY 96000000UL -#define KINETIS_SYSCLK_FREQUENCY 48000000UL -#endif - -/* FEI mode - 48 MHz with internal 32.768 kHz crystal */ -#if 0 -#define KINETIS_MCG_MODE KINETIS_MCG_MODE_FEI -#define KINETIS_MCG_FLL_DMX32 1 /* Fine-tune for 32.768 kHz */ -#define KINETIS_MCG_FLL_DRS 1 /* 1464x FLL factor */ -#define KINETIS_SYSCLK_FREQUENCY 47972352UL /* 32.768 kHz * 1464 (~48 MHz) */ -#define KINETIS_CLKDIV1_OUTDIV1 1 /* Divide MCGCLKOUT (~48MHz) by 1 to SYSCLK */ -#define KINETIS_CLKDIV1_OUTDIV2 1 /* Divide by 1 for (~48MHz) peripheral clock */ -#define KINETIS_CLKDIV1_OUTDIV4 2 /* Divide by 2 for (~24MHz) flash clock */ -#define KINETIS_BUSCLK_FREQUENCY KINETIS_SYSCLK_FREQUENCY -#define KINETIS_FLASHCLK_FREQUENCY KINETIS_SYSCLK_FREQUENCY/2 -#endif /* 0 */ - -/* FEE mode - 24 MHz with external 32.768 kHz crystal */ -/* not implemented */ -#if 0 -#define KINETIS_MCG_MODE KINETIS_MCG_MODE_FEE -#define KINETIS_MCG_FLL_DMX32 1 /* Fine-tune for 32.768 kHz */ -#define KINETIS_MCG_FLL_DRS 0 /* 732x FLL factor */ -#define KINETIS_CLKDIV1_OUTDIV1 1 /* Divide 48 MHz FLL by 1 => 24 MHz */ -#define KINETIS_CLKDIV1_OUTDIV4 2 /* Divide OUTDIV1 output by 2 => 12 MHz */ -#define KINETIS_SYSCLK_FREQUENCY 23986176UL /* 32.768 kHz*732 (~24 MHz) */ -#define KINETIS_UART0_CLOCK_FREQ (32768 * 732) /* FLL output */ -#define KINETIS_UART0_CLOCK_SRC 1 /* Select FLL clock */ -#define KINETIS_BUSCLK_FREQUENCY (KINETIS_SYSCLK_FREQUENCY / KINETIS_CLKDIV1_OUTDIV4) -#endif /* 0 */ - -/* FEE mode - 48 MHz */ -/* not implemented */ -#if 0 -#define KINETIS_MCG_MODE KINETIS_MCG_MODE_FEE -#define KINETIS_MCG_FLL_DMX32 1 /* Fine-tune for 32.768 kHz */ -#define KINETIS_MCG_FLL_DRS 1 /* 1464x FLL factor */ -#define KINETIS_CLKDIV1_OUTDIV1 1 /* Divide 48 MHz FLL by 1 => 48 MHz */ -#define KINETIS_CLKDIV1_OUTDIV4 2 /* Divide OUTDIV1 output by 2 => 24 MHz */ -#define KINETIS_SYSCLK_FREQUENCY 47972352UL /* 32.768 kHz * 1464 (~48 MHz) */ -#endif /* 0 */ - -/* - * SERIAL driver system settings. - */ -#define KINETIS_SERIAL_USE_UART0 TRUE - -/* - * EXTI driver system settings. - */ -#define KINETIS_EXTI_NUM_CHANNELS 1 -#define KINETIS_EXT_PORTA_IRQ_PRIORITY 3 -#define KINETIS_EXT_PORTB_IRQ_PRIORITY 3 -#define KINETIS_EXT_PORTC_IRQ_PRIORITY 3 -#define KINETIS_EXT_PORTD_IRQ_PRIORITY 3 -#define KINETIS_EXT_PORTE_IRQ_PRIORITY 3 - -/* - * Processor specific widths of each port. - * Smaller numbers can be used if only lower pins in a port are being used to - * generate interrupts. Can be set to 0 if a port is unused. - */ - - -#if 0 -/* MK20 48pin */ -#define KINETIS_EXT_PORTA_WIDTH 20 -#define KINETIS_EXT_PORTB_WIDTH 18 -#define KINETIS_EXT_PORTC_WIDTH 8 -#define KINETIS_EXT_PORTD_WIDTH 8 -#define KINETIS_EXT_PORTE_WIDTH 0 -#endif - -/* MK20 64pin */ -#define KINETIS_EXT_PORTA_WIDTH 20 -#define KINETIS_EXT_PORTB_WIDTH 20 -#define KINETIS_EXT_PORTC_WIDTH 12 -#define KINETIS_EXT_PORTD_WIDTH 8 -#define KINETIS_EXT_PORTE_WIDTH 2 - -#if 0 -/* MK20 144pin */ -#define KINETIS_EXT_PORTA_WIDTH 30 -#define KINETIS_EXT_PORTB_WIDTH 24 -#define KINETIS_EXT_PORTC_WIDTH 20 -#define KINETIS_EXT_PORTD_WIDTH 16 -#define KINETIS_EXT_PORTE_WIDTH 13 -#endif - -#endif /* _MCUCONF_H_ */ -- cgit v1.2.3