6 files changed, 1115 insertions, 742 deletions
diff --git a/testhal/STM32/STM32F0xx/crc/Makefile b/testhal/STM32/STM32F0xx/crc/Makefile
index 24f660a..7dfc020 100644
--- a/testhal/STM32/STM32F0xx/crc/Makefile
+++ b/testhal/STM32/STM32F0xx/crc/Makefile
@@ -1,214 +1,216 @@
-##############################################################################
-# Build global options
-# NOTE: Can be overridden externally.
-#
-
-# Compiler options here.
-ifeq ($(USE_OPT),)
-  USE_OPT = -O0 -ggdb -fomit-frame-pointer -falign-functions=16
-endif
-
-# C specific options here (added to USE_OPT).
-ifeq ($(USE_COPT),)
-  USE_COPT = 
-endif
-
-# C++ specific options here (added to USE_OPT).
-ifeq ($(USE_CPPOPT),)
-  USE_CPPOPT = -fno-rtti
-endif
-
-# Enable this if you want the linker to remove unused code and data
-ifeq ($(USE_LINK_GC),)
-  USE_LINK_GC = yes
-endif
-
-# Linker extra options here.
-ifeq ($(USE_LDOPT),)
-  USE_LDOPT = 
-endif
-
-# Enable this if you want link time optimizations (LTO)
-ifeq ($(USE_LTO),)
-  USE_LTO = yes
-endif
-
-# If enabled, this option allows to compile the application in THUMB mode.
-ifeq ($(USE_THUMB),)
-  USE_THUMB = yes
-endif
-
-# Enable this if you want to see the full log while compiling.
-ifeq ($(USE_VERBOSE_COMPILE),)
-  USE_VERBOSE_COMPILE = no
-endif
-
-# If enabled, this option makes the build process faster by not compiling
-# modules not used in the current configuration.
-ifeq ($(USE_SMART_BUILD),)
-  USE_SMART_BUILD = yes
-endif
-
-#
-# Build global options
-##############################################################################
-
-##############################################################################
-# Architecture or project specific options
-#
-
-# Stack size to be allocated to the Cortex-M process stack. This stack is
-# the stack used by the main() thread.
-ifeq ($(USE_PROCESS_STACKSIZE),)
-  USE_PROCESS_STACKSIZE = 0x200
-endif
-
-# Stack size to the allocated to the Cortex-M main/exceptions stack. This
-# stack is used for processing interrupts and exceptions.
-ifeq ($(USE_EXCEPTIONS_STACKSIZE),)
-  USE_EXCEPTIONS_STACKSIZE = 0x400
-endif
-
-#
-# Architecture or project specific options
-##############################################################################
-
-##############################################################################
-# Project, sources and paths
-#
-
-# Define project name here
-PROJECT = ch
-
-# Imported source files and paths
+##############################################################################
+# Build global options
+# NOTE: Can be overridden externally.
+#
+
+# Compiler options here.
+ifeq ($(USE_OPT),)
+  USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16
+endif
+
+# C specific options here (added to USE_OPT).
+ifeq ($(USE_COPT),)
+  USE_COPT = 
+endif
+
+# C++ specific options here (added to USE_OPT).
+ifeq ($(USE_CPPOPT),)
+  USE_CPPOPT = -fno-rtti
+endif
+
+# Enable this if you want the linker to remove unused code and data
+ifeq ($(USE_LINK_GC),)
+  USE_LINK_GC = yes
+endif
+
+# Linker extra options here.
+ifeq ($(USE_LDOPT),)
+  USE_LDOPT = 
+endif
+
+# Enable this if you want link time optimizations (LTO)
+ifeq ($(USE_LTO),)
+  USE_LTO = yes
+endif
+
+# If enabled, this option allows to compile the application in THUMB mode.
+ifeq ($(USE_THUMB),)
+  USE_THUMB = yes
+endif
+
+# Enable this if you want to see the full log while compiling.
+ifeq ($(USE_VERBOSE_COMPILE),)
+  USE_VERBOSE_COMPILE = no
+endif
+
+# If enabled, this option makes the build process faster by not compiling
+# modules not used in the current configuration.
+ifeq ($(USE_SMART_BUILD),)
+  USE_SMART_BUILD = yes
+endif
+
+#
+# Build global options
+##############################################################################
+
+##############################################################################
+# Architecture or project specific options
+#
+
+# Stack size to be allocated to the Cortex-M process stack. This stack is
+# the stack used by the main() thread.
+ifeq ($(USE_PROCESS_STACKSIZE),)
+  USE_PROCESS_STACKSIZE = 0x200
+endif
+
+# Stack size to the allocated to the Cortex-M main/exceptions stack. This
+# stack is used for processing interrupts and exceptions.
+ifeq ($(USE_EXCEPTIONS_STACKSIZE),)
+  USE_EXCEPTIONS_STACKSIZE = 0x400
+endif
+
+#
+# Architecture or project specific options
+##############################################################################
+
+##############################################################################
+# Project, sources and paths
+#
+
+# Define project name here
+PROJECT = ch
+
+# Imported source files and paths
 CHIBIOS = ../../../../../ChibiOS-RT
-CHIBIOS_CONTRIB = $(CHIBIOS)/../ChibiOS-Contrib
-# Startup files.
-include $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC/mk/startup_stm32f0xx.mk
-# HAL-OSAL files (optional).
-include $(CHIBIOS_CONTRIB)/os/hal/hal.mk
-include $(CHIBIOS_CONTRIB)/os/hal/ports/STM32/STM32F0xx/platform.mk
-include $(CHIBIOS)/os/hal/boards/ST_STM32F072B_DISCOVERY/board.mk
-include $(CHIBIOS)/os/hal/osal/rt/osal.mk
-# RTOS files (optional).
-include $(CHIBIOS)/os/rt/rt.mk
-include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/port_v6m.mk
-
-# Define linker script file here
-LDSCRIPT= $(STARTUPLD)/STM32F051x8.ld
-
-# C sources that can be compiled in ARM or THUMB mode depending on the global
-# setting.
-CSRC = $(STARTUPSRC) \
-       $(KERNSRC) \
-       $(PORTSRC) \
-       $(OSALSRC) \
-       $(HALSRC) \
-       $(PLATFORMSRC) \
-       $(BOARDSRC) \
-       $(TESTSRC) \
-       main.c \
-       $(CHIBIOS_CONTRIB)/os/various/crcsw.c
-
-# C++ sources that can be compiled in ARM or THUMB mode depending on the global
-# setting.
-CPPSRC =
-
-# C sources to be compiled in ARM mode regardless of the global setting.
-# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
-#       option that results in lower performance and larger code size.
-ACSRC =
-
-# C++ sources to be compiled in ARM mode regardless of the global setting.
-# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
-#       option that results in lower performance and larger code size.
-ACPPSRC =
-
-# C sources to be compiled in THUMB mode regardless of the global setting.
-# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
-#       option that results in lower performance and larger code size.
-TCSRC =
-
-# C sources to be compiled in THUMB mode regardless of the global setting.
-# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
-#       option that results in lower performance and larger code size.
-TCPPSRC =
-
-# List ASM source files here
-ASMSRC =
-ASMXSRC = $(STARTUPASM) $(PORTASM) $(OSALASM)
-
-INCDIR = $(CHIBIOS)/os/license \
-         $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \
-         $(HALINC) $(PLATFORMINC) $(BOARDINC) $(TESTINC) \
-         $(CHIBIOS)/os/various \
-         $(CHIBIOS_CONTRIB)/os/various
-
-#
-# Project, sources and paths
-##############################################################################
-
-##############################################################################
-# Compiler settings
-#
-
-MCU  = cortex-m0
-
-#TRGT = arm-elf-
-TRGT = arm-none-eabi-
-CC   = $(TRGT)gcc
-CPPC = $(TRGT)g++
-# Enable loading with g++ only if you need C++ runtime support.
-# NOTE: You can use C++ even without C++ support if you are careful. C++
-#       runtime support makes code size explode.
-LD   = $(TRGT)gcc
-#LD   = $(TRGT)g++
-CP   = $(TRGT)objcopy
-AS   = $(TRGT)gcc -x assembler-with-cpp
-AR   = $(TRGT)ar
-OD   = $(TRGT)objdump
-SZ   = $(TRGT)size
-HEX  = $(CP) -O ihex
-BIN  = $(CP) -O binary
-
-# ARM-specific options here
-AOPT =
-
-# THUMB-specific options here
-TOPT = -mthumb -DTHUMB
-
-# Define C warning options here
-CWARN = -Wall -Wextra -Wundef -Wstrict-prototypes
-
-# Define C++ warning options here
-CPPWARN = -Wall -Wextra -Wundef
-
-#
-# Compiler settings
-##############################################################################
-
-##############################################################################
-# Start of user section
-#
-
-# List all user C define here, like -D_DEBUG=1
-UDEFS =
-
-# Define ASM defines here
-UADEFS =
-
-# List all user directories here
-UINCDIR =
-
-# List the user directory to look for the libraries here
-ULIBDIR =
-
-# List all user libraries here
-ULIBS =
-
-#
-# End of user defines
-##############################################################################
-
-RULESPATH = $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC
-include $(RULESPATH)/rules.mk
+CHIBIOS_CONTRIB = $(CHIBIOS)/../ChibiOS-Contrib
+# Startup files.
+include $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC/mk/startup_stm32f0xx.mk
+# HAL-OSAL files (optional).
+include $(CHIBIOS_CONTRIB)/os/hal/hal.mk
+include $(CHIBIOS_CONTRIB)/os/hal/ports/STM32/STM32F0xx/platform.mk
+include $(CHIBIOS)/os/hal/boards/ST_STM32F072B_DISCOVERY/board.mk
+include $(CHIBIOS)/os/hal/osal/rt/osal.mk
+# RTOS files (optional).
+include $(CHIBIOS)/os/rt/rt.mk
+include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/port_v6m.mk
+# Other files (optional).
+#include $(CHIBIOS)/test/lib/test.mk
+#include $(CHIBIOS)/test/rt/rt_test.mk
+#include $(CHIBIOS)/test/oslib/oslib_test.mk
+
+# Define linker script file here
+LDSCRIPT= $(STARTUPLD)/STM32F051x8.ld
+
+# C sources that can be compiled in ARM or THUMB mode depending on the global
+# setting.
+CSRC = $(STARTUPSRC) \
+       $(KERNSRC) \
+       $(PORTSRC) \
+       $(OSALSRC) \
+       $(HALSRC) \
+       $(PLATFORMSRC) \
+       $(BOARDSRC) \
+       $(TESTSRC) \
+       main.c
+
+# C++ sources that can be compiled in ARM or THUMB mode depending on the global
+# setting.
+CPPSRC =
+
+# C sources to be compiled in ARM mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+#       option that results in lower performance and larger code size.
+ACSRC =
+
+# C++ sources to be compiled in ARM mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+#       option that results in lower performance and larger code size.
+ACPPSRC =
+
+# C sources to be compiled in THUMB mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+#       option that results in lower performance and larger code size.
+TCSRC =
+
+# C sources to be compiled in THUMB mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+#       option that results in lower performance and larger code size.
+TCPPSRC =
+
+# List ASM source files here
+ASMSRC =
+ASMXSRC = $(STARTUPASM) $(PORTASM) $(OSALASM)
+
+INCDIR = $(CHIBIOS)/os/license \
+         $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \
+         $(HALINC) $(PLATFORMINC) $(BOARDINC) $(TESTINC) \
+         $(CHIBIOS_CONTRIB)/os/various
+
+#
+# Project, sources and paths
+##############################################################################
+
+##############################################################################
+# Compiler settings
+#
+
+MCU  = cortex-m0
+
+#TRGT = arm-elf-
+TRGT = arm-none-eabi-
+CC   = $(TRGT)gcc
+CPPC = $(TRGT)g++
+# Enable loading with g++ only if you need C++ runtime support.
+# NOTE: You can use C++ even without C++ support if you are careful. C++
+#       runtime support makes code size explode.
+LD   = $(TRGT)gcc
+#LD   = $(TRGT)g++
+CP   = $(TRGT)objcopy
+AS   = $(TRGT)gcc -x assembler-with-cpp
+AR   = $(TRGT)ar
+OD   = $(TRGT)objdump
+SZ   = $(TRGT)size
+HEX  = $(CP) -O ihex
+BIN  = $(CP) -O binary
+
+# ARM-specific options here
+AOPT =
+
+# THUMB-specific options here
+TOPT = -mthumb -DTHUMB
+
+# Define C warning options here
+CWARN = -Wall -Wextra -Wundef -Wstrict-prototypes
+
+# Define C++ warning options here
+CPPWARN = -Wall -Wextra -Wundef
+
+#
+# Compiler settings
+##############################################################################
+
+##############################################################################
+# Start of user section
+#
+
+# List all user C define here, like -D_DEBUG=1
+UDEFS =
+
+# Define ASM defines here
+UADEFS =
+
+# List all user directories here
+UINCDIR =
+
+# List the user directory to look for the libraries here
+ULIBDIR =
+
+# List all user libraries here
+ULIBS =
+
+#
+# End of user defines
+##############################################################################
+
+RULESPATH = $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC
+include $(RULESPATH)/rules.mk
diff --git a/testhal/STM32/STM32F0xx/crc/chconf.h b/testhal/STM32/STM32F0xx/crc/chconf.h
index 6a187da..53bd676 100644
--- a/testhal/STM32/STM32F0xx/crc/chconf.h
+++ b/testhal/STM32/STM32F0xx/crc/chconf.h
@@ -1,5 +1,5 @@
 /*
-    ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
+    ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio
 
     Licensed under the Apache License, Version 2.0 (the "License");
     you may not use this file except in compliance with the License.
@@ -52,6 +52,18 @@
 #define CH_CFG_ST_FREQUENCY                 10000
 
 /**
+ * @brief   Time intervals data size.
+ * @note    Allowed values are 16, 32 or 64 bits.
+ */
+#define CH_CFG_INTERVALS_SIZE               32
+
+/**
+ * @brief   Time types data size.
+ * @note    Allowed values are 16 or 32 bits.
+ */
+#define CH_CFG_TIME_TYPES_SIZE              32
+
+/**
  * @brief   Time delta constant for the tick-less mode.
  * @note    If this value is zero then the system uses the classic
  *          periodic tick. This value represents the minimum number
@@ -296,6 +308,15 @@
 #define CH_CFG_USE_MEMPOOLS                 TRUE
 
 /**
+ * @brief  Objects FIFOs APIs.
+ * @details If enabled then the objects FIFOs APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_OBJ_FIFOS                TRUE
+
+/**
  * @brief   Dynamic Threads APIs.
  * @details If enabled then the dynamic threads creation APIs are included
  *          in the kernel.
@@ -310,6 +331,56 @@
 
 /*===========================================================================*/
 /**
+ * @name Objects factory options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Objects Factory APIs.
+ * @details If enabled then the objects factory APIs are included in the
+ *          kernel.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_CFG_USE_FACTORY                  TRUE
+
+/**
+ * @brief   Maximum length for object names.
+ * @details If the specified length is zero then the name is stored by
+ *          pointer but this could have unintended side effects.
+ */
+#define CH_CFG_FACTORY_MAX_NAMES_LENGTH     8
+
+/**
+ * @brief   Enables the registry of generic objects.
+ */
+#define CH_CFG_FACTORY_OBJECTS_REGISTRY     TRUE
+
+/**
+ * @brief   Enables factory for generic buffers.
+ */
+#define CH_CFG_FACTORY_GENERIC_BUFFERS      TRUE
+
+/**
+ * @brief   Enables factory for semaphores.
+ */
+#define CH_CFG_FACTORY_SEMAPHORES           TRUE
+
+/**
+ * @brief   Enables factory for mailboxes.
+ */
+#define CH_CFG_FACTORY_MAILBOXES            TRUE
+
+/**
+ * @brief   Enables factory for objects FIFOs.
+ */
+#define CH_CFG_FACTORY_OBJ_FIFOS            TRUE
+
+/** @} */
+
+/*===========================================================================*/
+/**
  * @name Debug options
  * @{
  */
@@ -408,6 +479,22 @@
 /*===========================================================================*/
 
 /**
+ * @brief   System structure extension.
+ * @details User fields added to the end of the @p ch_system_t structure.
+ */
+#define CH_CFG_SYSTEM_EXTRA_FIELDS                                          \
+  /* Add threads custom fields here.*/
+
+/**
+ * @brief   System initialization hook.
+ * @details User initialization code added to the @p chSysInit() function
+ *          just before interrupts are enabled globally.
+ */
+#define CH_CFG_SYSTEM_INIT_HOOK(tp) {                                       \
+  /* Add threads initialization code here.*/                                \
+}
+
+/**
  * @brief   Threads descriptor structure extension.
  * @details User fields added to the end of the @p thread_t structure.
  */
@@ -416,9 +503,9 @@
 
 /**
  * @brief   Threads initialization hook.
- * @details User initialization code added to the @p chThdInit() API.
+ * @details User initialization code added to the @p _thread_init() function.
  *
- * @note    It is invoked from within @p chThdInit() and implicitly from all
+ * @note    It is invoked from within @p _thread_init() and implicitly from all
  *          the threads creation APIs.
  */
 #define CH_CFG_THREAD_INIT_HOOK(tp) {                                       \
diff --git a/testhal/STM32/STM32F0xx/crc/halconf.h b/testhal/STM32/STM32F0xx/crc/halconf.h
index 6e2d3c7..95e89c1 100644
--- a/testhal/STM32/STM32F0xx/crc/halconf.h
+++ b/testhal/STM32/STM32F0xx/crc/halconf.h
@@ -1,347 +1,419 @@
-/*
-    ChibiOS - Copyright (C) 2015 Michael D. Spradling
-
-    Licensed under the Apache License, Version 2.0 (the "License");
-    you may not use this file except in compliance with the License.
-    You may obtain a copy of the License at
-
-        http://www.apache.org/licenses/LICENSE-2.0
-
-    Unless required by applicable law or agreed to in writing, software
-    distributed under the License is distributed on an "AS IS" BASIS,
-    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-    See the License for the specific language governing permissions and
-    limitations under the License.
-*/
-
-/**
- * @file    templates/halconf.h
- * @brief   HAL configuration header.
- * @details HAL configuration file, this file allows to enable or disable the
- *          various device drivers from your application. You may also use
- *          this file in order to override the device drivers default settings.
- *
- * @addtogroup HAL_CONF
- * @{
- */
-
-#ifndef _HALCONF_H_
-#define _HALCONF_H_
-
-#include "mcuconf.h"
-
-/**
- * @brief   Enables the PAL subsystem.
- */
-#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__)
-#define HAL_USE_PAL                 TRUE
-#endif
-
-/**
- * @brief   Enables the ADC subsystem.
- */
-#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__)
-#define HAL_USE_ADC                 FALSE
-#endif
-
-/**
- * @brief   Enables the CAN subsystem.
- */
-#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__)
-#define HAL_USE_CAN                 FALSE
-#endif
-
-/**
- * @brief   Enables the DAC subsystem.
- */
-#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__)
-#define HAL_USE_DAC                 FALSE
-#endif
-
-/**
- * @brief   Enables the EXT subsystem.
- */
-#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__)
-#define HAL_USE_EXT                 FALSE
-#endif
-
-/**
- * @brief   Enables the GPT subsystem.
- */
-#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__)
-#define HAL_USE_GPT                 FALSE
-#endif
-
-/**
- * @brief   Enables the I2C subsystem.
- */
-#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__)
-#define HAL_USE_I2C                 FALSE
-#endif
-
-/**
- * @brief   Enables the I2S subsystem.
- */
-#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__)
-#define HAL_USE_I2S                 FALSE
-#endif
-
-/**
- * @brief   Enables the ICU subsystem.
- */
-#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__)
-#define HAL_USE_ICU                 FALSE
-#endif
-
-/**
- * @brief   Enables the MAC subsystem.
- */
-#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__)
-#define HAL_USE_MAC                 FALSE
-#endif
-
-/**
- * @brief   Enables the MMC_SPI subsystem.
- */
-#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__)
-#define HAL_USE_MMC_SPI             FALSE
-#endif
-
-/**
- * @brief   Enables the PWM subsystem.
- */
-#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__)
-#define HAL_USE_PWM                 FALSE
-#endif
-
-/**
- * @brief   Enables the RTC subsystem.
- */
-#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__)
-#define HAL_USE_RTC                 FALSE
-#endif
-
-/**
- * @brief   Enables the SDC subsystem.
- */
-#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__)
-#define HAL_USE_SDC                 FALSE
-#endif
-
-/**
- * @brief   Enables the SERIAL subsystem.
- */
-#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__)
-#define HAL_USE_SERIAL              FALSE
-#endif
-
-/**
- * @brief   Enables the SERIAL over USB subsystem.
- */
-#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__)
-#define HAL_USE_SERIAL_USB          FALSE
-#endif
-
-/**
- * @brief   Enables the SPI subsystem.
- */
-#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__)
-#define HAL_USE_SPI                 FALSE
-#endif
-
-/**
- * @brief   Enables the UART subsystem.
- */
-#if !defined(HAL_USE_UART) || defined(__DOXYGEN__)
-#define HAL_USE_UART                FALSE
-#endif
-
-/**
- * @brief   Enables the USB subsystem.
- */
-#if !defined(HAL_USE_USB) || defined(__DOXYGEN__)
-#define HAL_USE_USB                 FALSE
-#endif
-
-/**
- * @brief   Enables the WDG subsystem.
- */
-#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__)
-#define HAL_USE_WDG                 FALSE
-#endif
-
-/*===========================================================================*/
-/* ADC driver related settings.                                              */
-/*===========================================================================*/
-
-/**
- * @brief   Enables synchronous APIs.
- * @note    Disabling this option saves both code and data space.
- */
-#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__)
-#define ADC_USE_WAIT                TRUE
-#endif
-
-/**
- * @brief   Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs.
- * @note    Disabling this option saves both code and data space.
- */
-#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
-#define ADC_USE_MUTUAL_EXCLUSION    TRUE
-#endif
-
-/*===========================================================================*/
-/* CAN driver related settings.                                              */
-/*===========================================================================*/
-
-/**
- * @brief   Sleep mode related APIs inclusion switch.
- */
-#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__)
-#define CAN_USE_SLEEP_MODE          TRUE
-#endif
-
-/*===========================================================================*/
-/* I2C driver related settings.                                              */
-/*===========================================================================*/
-
-/**
- * @brief   Enables the mutual exclusion APIs on the I2C bus.
- */
-#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
-#define I2C_USE_MUTUAL_EXCLUSION    TRUE
-#endif
-
-/*===========================================================================*/
-/* MAC driver related settings.                                              */
-/*===========================================================================*/
-
-/**
- * @brief   Enables an event sources for incoming packets.
- */
-#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__)
-#define MAC_USE_ZERO_COPY           FALSE
-#endif
-
-/**
- * @brief   Enables an event sources for incoming packets.
- */
-#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__)
-#define MAC_USE_EVENTS              TRUE
-#endif
-
-/*===========================================================================*/
-/* MMC_SPI driver related settings.                                          */
-/*===========================================================================*/
-
-/**
- * @brief   Delays insertions.
- * @details If enabled this options inserts delays into the MMC waiting
- *          routines releasing some extra CPU time for the threads with
- *          lower priority, this may slow down the driver a bit however.
- *          This option is recommended also if the SPI driver does not
- *          use a DMA channel and heavily loads the CPU.
- */
-#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__)
-#define MMC_NICE_WAITING            TRUE
-#endif
-
-/*===========================================================================*/
-/* SDC driver related settings.                                              */
-/*===========================================================================*/
-
-/**
- * @brief   Number of initialization attempts before rejecting the card.
- * @note    Attempts are performed at 10mS intervals.
- */
-#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__)
-#define SDC_INIT_RETRY              100
-#endif
-
-/**
- * @brief   Include support for MMC cards.
- * @note    MMC support is not yet implemented so this option must be kept
- *          at @p FALSE.
- */
-#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__)
-#define SDC_MMC_SUPPORT             FALSE
-#endif
-
-/**
- * @brief   Delays insertions.
- * @details If enabled this options inserts delays into the MMC waiting
- *          routines releasing some extra CPU time for the threads with
- *          lower priority, this may slow down the driver a bit however.
- */
-#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__)
-#define SDC_NICE_WAITING            TRUE
-#endif
-
-/*===========================================================================*/
-/* SERIAL driver related settings.                                           */
-/*===========================================================================*/
-
-/**
- * @brief   Default bit rate.
- * @details Configuration parameter, this is the baud rate selected for the
- *          default configuration.
- */
-#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__)
-#define SERIAL_DEFAULT_BITRATE      38400
-#endif
-
-/**
- * @brief   Serial buffers size.
- * @details Configuration parameter, you can change the depth of the queue
- *          buffers depending on the requirements of your application.
- * @note    The default is 64 bytes for both the transmission and receive
- *          buffers.
- */
-#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__)
-#define SERIAL_BUFFERS_SIZE         16
-#endif
-
-/*===========================================================================*/
-/* SERIAL_USB driver related setting.                                        */
-/*===========================================================================*/
-
-/**
- * @brief   Serial over USB buffers size.
- * @details Configuration parameter, the buffer size must be a multiple of
- *          the USB data endpoint maximum packet size.
- * @note    The default is 64 bytes for both the transmission and receive
- *          buffers.
- */
-#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__)
-#define SERIAL_USB_BUFFERS_SIZE     256
-#endif
-
-/*===========================================================================*/
-/* SPI driver related settings.                                              */
-/*===========================================================================*/
-
-/**
- * @brief   Enables synchronous APIs.
- * @note    Disabling this option saves both code and data space.
- */
-#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__)
-#define SPI_USE_WAIT                TRUE
-#endif
-
-/**
- * @brief   Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs.
- * @note    Disabling this option saves both code and data space.
- */
-#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
-#define SPI_USE_MUTUAL_EXCLUSION    TRUE
-#endif
-
-/*===========================================================================*/
-/* Community drivers's includes                                              */
-/*===========================================================================*/
-
-#include "halconf_community.h"
-
-#endif /* _HALCONF_H_ */
-
-/** @} */
+/*
+    ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/**
+ * @file    templates/halconf.h
+ * @brief   HAL configuration header.
+ * @details HAL configuration file, this file allows to enable or disable the
+ *          various device drivers from your application. You may also use
+ *          this file in order to override the device drivers default settings.
+ *
+ * @addtogroup HAL_CONF
+ * @{
+ */
+
+#ifndef HALCONF_H
+#define HALCONF_H
+
+#include "mcuconf.h"
+
+/**
+ * @brief   Enables the PAL subsystem.
+ */
+#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__)
+#define HAL_USE_PAL                 TRUE
+#endif
+
+/**
+ * @brief   Enables the ADC subsystem.
+ */
+#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__)
+#define HAL_USE_ADC                 TRUE
+#endif
+
+/**
+ * @brief   Enables the CAN subsystem.
+ */
+#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__)
+#define HAL_USE_CAN                 FALSE
+#endif
+
+/**
+ * @brief   Enables the cryptographic subsystem.
+ */
+#if !defined(HAL_USE_CRY) || defined(__DOXYGEN__)
+#define HAL_USE_CRY                 FALSE
+#endif
+
+/**
+ * @brief   Enables the DAC subsystem.
+ */
+#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__)
+#define HAL_USE_DAC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the EXT subsystem.
+ */
+#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__)
+#define HAL_USE_EXT                 FALSE
+#endif
+
+/**
+ * @brief   Enables the GPT subsystem.
+ */
+#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__)
+#define HAL_USE_GPT                 FALSE
+#endif
+
+/**
+ * @brief   Enables the I2C subsystem.
+ */
+#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__)
+#define HAL_USE_I2C                 FALSE
+#endif
+
+/**
+ * @brief   Enables the I2S subsystem.
+ */
+#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__)
+#define HAL_USE_I2S                 FALSE
+#endif
+
+/**
+ * @brief   Enables the ICU subsystem.
+ */
+#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__)
+#define HAL_USE_ICU                 FALSE
+#endif
+
+/**
+ * @brief   Enables the MAC subsystem.
+ */
+#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__)
+#define HAL_USE_MAC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the MMC_SPI subsystem.
+ */
+#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_MMC_SPI             FALSE
+#endif
+
+/**
+ * @brief   Enables the PWM subsystem.
+ */
+#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__)
+#define HAL_USE_PWM                 FALSE
+#endif
+
+/**
+ * @brief   Enables the QSPI subsystem.
+ */
+#if !defined(HAL_USE_QSPI) || defined(__DOXYGEN__)
+#define HAL_USE_QSPI                FALSE
+#endif
+
+/**
+ * @brief   Enables the RTC subsystem.
+ */
+#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__)
+#define HAL_USE_RTC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the SDC subsystem.
+ */
+#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__)
+#define HAL_USE_SDC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the SERIAL subsystem.
+ */
+#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL              FALSE
+#endif
+
+/**
+ * @brief   Enables the SERIAL over USB subsystem.
+ */
+#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL_USB          FALSE
+#endif
+
+/**
+ * @brief   Enables the SPI subsystem.
+ */
+#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_SPI                 FALSE
+#endif
+
+/**
+ * @brief   Enables the UART subsystem.
+ */
+#if !defined(HAL_USE_UART) || defined(__DOXYGEN__)
+#define HAL_USE_UART                FALSE
+#endif
+
+/**
+ * @brief   Enables the USB subsystem.
+ */
+#if !defined(HAL_USE_USB) || defined(__DOXYGEN__)
+#define HAL_USE_USB                 FALSE
+#endif
+
+/**
+ * @brief   Enables the WDG subsystem.
+ */
+#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__)
+#define HAL_USE_WDG                 FALSE
+#endif
+
+/*===========================================================================*/
+/* ADC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__)
+#define ADC_USE_WAIT                TRUE
+#endif
+
+/**
+ * @brief   Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define ADC_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* CAN driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Sleep mode related APIs inclusion switch.
+ */
+#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__)
+#define CAN_USE_SLEEP_MODE          TRUE
+#endif
+
+/*===========================================================================*/
+/* CRY driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables the SW fall-back of the cryptographic driver.
+ * @details When enabled, this option, activates a fall-back software
+ *          implementation for algorithms not supported by the underlying
+ *          hardware.
+ * @note    Fall-back implementations may not be present for all algorithms.
+ */
+#if !defined(HAL_CRY_USE_FALLBACK) || defined(__DOXYGEN__)
+#define HAL_CRY_USE_FALLBACK                FALSE
+#endif
+
+/**
+ * @brief   Makes the driver forcibly use the fall-back implementations.
+ */
+#if !defined(HAL_CRY_ENFORCE_FALLBACK) || defined(__DOXYGEN__)
+#define HAL_CRY_ENFORCE_FALLBACK            FALSE
+#endif
+
+/*===========================================================================*/
+/* I2C driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables the mutual exclusion APIs on the I2C bus.
+ */
+#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define I2C_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* MAC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables an event sources for incoming packets.
+ */
+#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__)
+#define MAC_USE_ZERO_COPY           FALSE
+#endif
+
+/**
+ * @brief   Enables an event sources for incoming packets.
+ */
+#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__)
+#define MAC_USE_EVENTS              TRUE
+#endif
+
+/*===========================================================================*/
+/* MMC_SPI driver related settings.                                          */
+/*===========================================================================*/
+
+/**
+ * @brief   Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ *          routines releasing some extra CPU time for the threads with
+ *          lower priority, this may slow down the driver a bit however.
+ *          This option is recommended also if the SPI driver does not
+ *          use a DMA channel and heavily loads the CPU.
+ */
+#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__)
+#define MMC_NICE_WAITING            TRUE
+#endif
+
+/*===========================================================================*/
+/* SDC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Number of initialization attempts before rejecting the card.
+ * @note    Attempts are performed at 10mS intervals.
+ */
+#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__)
+#define SDC_INIT_RETRY              100
+#endif
+
+/**
+ * @brief   Include support for MMC cards.
+ * @note    MMC support is not yet implemented so this option must be kept
+ *          at @p FALSE.
+ */
+#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__)
+#define SDC_MMC_SUPPORT             FALSE
+#endif
+
+/**
+ * @brief   Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ *          routines releasing some extra CPU time for the threads with
+ *          lower priority, this may slow down the driver a bit however.
+ */
+#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__)
+#define SDC_NICE_WAITING            TRUE
+#endif
+
+/*===========================================================================*/
+/* SERIAL driver related settings.                                           */
+/*===========================================================================*/
+
+/**
+ * @brief   Default bit rate.
+ * @details Configuration parameter, this is the baud rate selected for the
+ *          default configuration.
+ */
+#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__)
+#define SERIAL_DEFAULT_BITRATE      38400
+#endif
+
+/**
+ * @brief   Serial buffers size.
+ * @details Configuration parameter, you can change the depth of the queue
+ *          buffers depending on the requirements of your application.
+ * @note    The default is 16 bytes for both the transmission and receive
+ *          buffers.
+ */
+#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_BUFFERS_SIZE         16
+#endif
+
+/*===========================================================================*/
+/* SERIAL_USB driver related setting.                                        */
+/*===========================================================================*/
+
+/**
+ * @brief   Serial over USB buffers size.
+ * @details Configuration parameter, the buffer size must be a multiple of
+ *          the USB data endpoint maximum packet size.
+ * @note    The default is 256 bytes for both the transmission and receive
+ *          buffers.
+ */
+#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_USB_BUFFERS_SIZE     256
+#endif
+
+/**
+ * @brief   Serial over USB number of buffers.
+ * @note    The default is 2 buffers.
+ */
+#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__)
+#define SERIAL_USB_BUFFERS_NUMBER   2
+#endif
+
+/*===========================================================================*/
+/* SPI driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__)
+#define SPI_USE_WAIT                TRUE
+#endif
+
+/**
+ * @brief   Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define SPI_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* UART driver related settings.                                             */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__)
+#define UART_USE_WAIT               FALSE
+#endif
+
+/**
+ * @brief   Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define UART_USE_MUTUAL_EXCLUSION   FALSE
+#endif
+
+/*===========================================================================*/
+/* USB driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__)
+#define USB_USE_WAIT                FALSE
+#endif
+
+#include "halconf_community.h"
+
+#endif /* HALCONF_H */
+
+/** @} */
diff --git a/testhal/STM32/STM32F0xx/crc/halconf_community.h b/testhal/STM32/STM32F0xx/crc/halconf_community.h
index 31ac01e..91233ed 100644
--- a/testhal/STM32/STM32F0xx/crc/halconf_community.h
+++ b/testhal/STM32/STM32F0xx/crc/halconf_community.h
@@ -66,6 +66,48 @@
 #define HAL_USE_RNG                 FALSE
 #endif
 
+/**
+ * @brief   Enables the EEPROM subsystem.
+ */
+#if !defined(HAL_USE_EEPROM) || defined(__DOXYGEN__)
+#define HAL_USE_EEPROM              FALSE
+#endif
+
+/**
+ * @brief   Enables the TIMCAP subsystem.
+ */
+#if !defined(HAL_USE_TIMCAP) || defined(__DOXYGEN__)
+#define HAL_USE_TIMCAP              FALSE
+#endif
+
+/**
+ * @brief   Enables the TIMCAP subsystem.
+ */
+#if !defined(HAL_USE_COMP) || defined(__DOXYGEN__)
+#define HAL_USE_COMP                FALSE
+#endif
+
+/**
+ * @brief   Enables the QEI subsystem.
+ */
+#if !defined(HAL_USE_QEI) || defined(__DOXYGEN__)
+#define HAL_USE_QEI                 FALSE
+#endif
+
+/**
+ * @brief   Enables the USBH subsystem.
+ */
+#if !defined(HAL_USE_USBH) || defined(__DOXYGEN__)
+#define HAL_USE_USBH                FALSE
+#endif
+
+/**
+ * @brief   Enables the USB_MSD subsystem.
+ */
+#if !defined(HAL_USE_USB_MSD) || defined(__DOXYGEN__)
+#define HAL_USE_USB_MSD             FALSE
+#endif
+
 /*===========================================================================*/
 /* FSMCNAND driver related settings.                                         */
 /*===========================================================================*/
@@ -94,25 +136,38 @@
 #define ONEWIRE_USE_SEARCH_ROM      TRUE
 
 /*===========================================================================*/
-/* CRC driver settings.                                                      */
+/* QEI driver related settings.                                              */
 /*===========================================================================*/
 
 /**
- * @brief   Enables DMA engine when performing CRC transactions.
- * @note    Enabling this option also enables asynchronous API.
+ * @brief   Enables discard of overlow
  */
-#if !defined(CRC_USE_DMA) || defined(__DOXYGEN__)
-#define CRC_USE_DMA                 FALSE
+#if !defined(QEI_USE_OVERFLOW_DISCARD) || defined(__DOXYGEN__)
+#define QEI_USE_OVERFLOW_DISCARD    FALSE
 #endif
 
 /**
- * @brief   Enables the @p crcAcquireUnit() and @p crcReleaseUnit() APIs.
- * @note    Disabling this option saves both code and data space.
+ * @brief   Enables min max of overlow
  */
-#if !defined(CRC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
-#define CRC_USE_MUTUAL_EXCLUSION    TRUE
+#if !defined(QEI_USE_OVERFLOW_MINMAX) || defined(__DOXYGEN__)
+#define QEI_USE_OVERFLOW_MINMAX     FALSE
 #endif
 
+/*===========================================================================*/
+/* EEProm driver related settings.                                           */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables 24xx series I2C eeprom device driver.
+ * @note    Disabling this option saves both code and data space.
+ */
+#define EEPROM_USE_EE24XX FALSE
+ /**
+ * @brief   Enables 25xx series SPI eeprom device driver.
+ * @note    Disabling this option saves both code and data space.
+ */
+#define EEPROM_USE_EE25XX FALSE
+
 #endif /* HALCONF_COMMUNITY_H */
 
 /** @} */
diff --git a/testhal/STM32/STM32F0xx/crc/mcuconf.h b/testhal/STM32/STM32F0xx/crc/mcuconf.h
index ad184cd..263cfd2 100644
--- a/testhal/STM32/STM32F0xx/crc/mcuconf.h
+++ b/testhal/STM32/STM32F0xx/crc/mcuconf.h
@@ -1,166 +1,201 @@
-/*
-    ChibiOS - Copyright (C) 2015 Michael D. Spradling
-
-    Licensed under the Apache License, Version 2.0 (the "License");
-    you may not use this file except in compliance with the License.
-    You may obtain a copy of the License at
-
-        http://www.apache.org/licenses/LICENSE-2.0
-
-    Unless required by applicable law or agreed to in writing, software
-    distributed under the License is distributed on an "AS IS" BASIS,
-    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-    See the License for the specific language governing permissions and
-    limitations under the License.
-*/
-
-#ifndef _MCUCONF_H_
-#define _MCUCONF_H_
-
-/*
- * STM32F0xx drivers configuration.
- * The following settings override the default settings present in
- * the various device driver implementation headers.
- * Note that the settings for each driver only have effect if the whole
- * driver is enabled in halconf.h.
- *
- * IRQ priorities:
- * 3...0       Lowest...Highest.
- *
- * DMA priorities:
- * 0...3        Lowest...Highest.
- */
-
-#define STM32F0xx_MCUCONF
-
-/*
- * HAL driver system settings.
- */
-#define STM32_NO_INIT                       FALSE
-#define STM32_PVD_ENABLE                    FALSE
-#define STM32_PLS                           STM32_PLS_LEV0
-#define STM32_HSI_ENABLED                   TRUE
-#define STM32_HSI14_ENABLED                 TRUE
-#define STM32_LSI_ENABLED                   TRUE
-#define STM32_HSE_ENABLED                   FALSE
-#define STM32_LSE_ENABLED                   FALSE
-#define STM32_SW                            STM32_SW_PLL
-#define STM32_PLLSRC                        STM32_PLLSRC_HSI_DIV2
-#define STM32_PREDIV_VALUE                  1
-#define STM32_PLLMUL_VALUE                  12
-#define STM32_HPRE                          STM32_HPRE_DIV1
-#define STM32_PPRE                          STM32_PPRE_DIV1
-#define STM32_ADCSW                         STM32_ADCSW_HSI14
-#define STM32_ADCPRE                        STM32_ADCPRE_DIV4
-#define STM32_MCOSEL                        STM32_MCOSEL_NOCLOCK
-#define STM32_ADCPRE                        STM32_ADCPRE_DIV4
-#define STM32_ADCSW                         STM32_ADCSW_HSI14
-#define STM32_CECSW                         STM32_CECSW_HSI
-#define STM32_I2C1SW                        STM32_I2C1SW_HSI
-#define STM32_USART1SW                      STM32_USART1SW_PCLK
-#define STM32_RTCSEL                        STM32_RTCSEL_LSI
-
-/*
- * ADC driver system settings.
- */
-#define STM32_ADC_USE_ADC1                  FALSE
-#define STM32_ADC_ADC1_DMA_PRIORITY         2
-#define STM32_ADC_IRQ_PRIORITY              2
-#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY     2
-
-/*
- * EXT driver system settings.
- */
-#define STM32_EXT_EXTI0_1_IRQ_PRIORITY      3
-#define STM32_EXT_EXTI2_3_IRQ_PRIORITY      3
-#define STM32_EXT_EXTI4_15_IRQ_PRIORITY     3
-#define STM32_EXT_EXTI16_IRQ_PRIORITY       3
-#define STM32_EXT_EXTI17_IRQ_PRIORITY       3
-
-/*
- * GPT driver system settings.
- */
-#define STM32_GPT_USE_TIM1                  FALSE
-#define STM32_GPT_USE_TIM2                  FALSE
-#define STM32_GPT_USE_TIM3                  FALSE
-#define STM32_GPT_USE_TIM14                 FALSE
-#define STM32_GPT_TIM1_IRQ_PRIORITY         2
-#define STM32_GPT_TIM2_IRQ_PRIORITY         2
-#define STM32_GPT_TIM3_IRQ_PRIORITY         2
-#define STM32_GPT_TIM14_IRQ_PRIORITY        2
-
-/*
- * I2C driver system settings.
- */
-#define STM32_I2C_USE_I2C1                  FALSE
-#define STM32_I2C_USE_I2C2                  FALSE
-#define STM32_I2C_BUSY_TIMEOUT              50
-#define STM32_I2C_I2C1_IRQ_PRIORITY         3
-#define STM32_I2C_I2C2_IRQ_PRIORITY         3
-#define STM32_I2C_USE_DMA                   TRUE
-#define STM32_I2C_I2C1_DMA_PRIORITY         1
-#define STM32_I2C_I2C2_DMA_PRIORITY         1
-#define STM32_I2C_DMA_ERROR_HOOK(i2cp)      osalSysHalt("DMA failure")
-
-/*
- * ICU driver system settings.
- */
-#define STM32_ICU_USE_TIM1                  FALSE
-#define STM32_ICU_USE_TIM2                  FALSE
-#define STM32_ICU_USE_TIM3                  FALSE
-#define STM32_ICU_TIM1_IRQ_PRIORITY         3
-#define STM32_ICU_TIM2_IRQ_PRIORITY         3
-#define STM32_ICU_TIM3_IRQ_PRIORITY         3
-
-/*
- * PWM driver system settings.
- */
-#define STM32_PWM_USE_ADVANCED              FALSE
-#define STM32_PWM_USE_TIM1                  FALSE
-#define STM32_PWM_USE_TIM2                  FALSE
-#define STM32_PWM_USE_TIM3                  FALSE
-#define STM32_PWM_TIM1_IRQ_PRIORITY         3
-#define STM32_PWM_TIM2_IRQ_PRIORITY         3
-#define STM32_PWM_TIM3_IRQ_PRIORITY         3
-
-/*
- * SERIAL driver system settings.
- */
-#define STM32_SERIAL_USE_USART1             FALSE
-#define STM32_SERIAL_USE_USART2             FALSE
-#define STM32_SERIAL_USART1_PRIORITY        3
-#define STM32_SERIAL_USART2_PRIORITY        3
-
-/*
- * SPI driver system settings.
- */
-#define STM32_SPI_USE_SPI1                  FALSE
-#define STM32_SPI_USE_SPI2                  FALSE
-#define STM32_SPI_SPI1_DMA_PRIORITY         1
-#define STM32_SPI_SPI2_DMA_PRIORITY         1
-#define STM32_SPI_SPI1_IRQ_PRIORITY         2
-#define STM32_SPI_SPI2_IRQ_PRIORITY         2
-#define STM32_SPI_DMA_ERROR_HOOK(spip)      osalSysHalt("DMA failure")
-
-/*
- * ST driver system settings.
- */
-#define STM32_ST_IRQ_PRIORITY               2
-#define STM32_ST_USE_TIMER                  2
-
-/*
- * UART driver system settings.
- */
-#define STM32_UART_USE_USART1               FALSE
-#define STM32_UART_USE_USART2               FALSE
-#define STM32_UART_USART1_IRQ_PRIORITY      3
-#define STM32_UART_USART2_IRQ_PRIORITY      3
-#define STM32_UART_USART1_DMA_PRIORITY      0
-#define STM32_UART_USART2_DMA_PRIORITY      0
-#define STM32_UART_DMA_ERROR_HOOK(uartp)    osalSysHalt("DMA failure")
-
-/*
- * header for community drivers.
- */
-#include "mcuconf_community.h"
-#endif /* _MCUCONF_H_ */
+/*
+    ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+#ifndef MCUCONF_H
+#define MCUCONF_H
+
+/*
+ * STM32F0xx drivers configuration.
+ * The following settings override the default settings present in
+ * the various device driver implementation headers.
+ * Note that the settings for each driver only have effect if the whole
+ * driver is enabled in halconf.h.
+ *
+ * IRQ priorities:
+ * 3...0       Lowest...Highest.
+ *
+ * DMA priorities:
+ * 0...3        Lowest...Highest.
+ */
+
+#define STM32F0xx_MCUCONF
+
+/*
+ * HAL driver system settings.
+ */
+#define STM32_NO_INIT                       FALSE
+#define STM32_PVD_ENABLE                    FALSE
+#define STM32_PLS                           STM32_PLS_LEV0
+#define STM32_HSI_ENABLED                   TRUE
+#define STM32_HSI14_ENABLED                 TRUE
+#define STM32_LSI_ENABLED                   TRUE
+#define STM32_HSE_ENABLED                   FALSE
+#define STM32_LSE_ENABLED                   FALSE
+#define STM32_SW                            STM32_SW_PLL
+#define STM32_PLLSRC                        STM32_PLLSRC_HSI_DIV2
+#define STM32_PREDIV_VALUE                  1
+#define STM32_PLLMUL_VALUE                  12
+#define STM32_HPRE                          STM32_HPRE_DIV1
+#define STM32_PPRE                          STM32_PPRE_DIV1
+#define STM32_MCOSEL                        STM32_MCOSEL_NOCLOCK
+#define STM32_MCOPRE                        STM32_MCOPRE_DIV1
+#define STM32_PLLNODIV                      STM32_PLLNODIV_DIV2
+#define STM32_USBSW                         STM32_USBSW_HSI48
+#define STM32_CECSW                         STM32_CECSW_HSI
+#define STM32_I2C1SW                        STM32_I2C1SW_HSI
+#define STM32_USART1SW                      STM32_USART1SW_PCLK
+#define STM32_RTCSEL                        STM32_RTCSEL_LSI
+
+/*
+ * IRQ system settings.
+ */
+#define STM32_IRQ_EXTI0_1_IRQ_PRIORITY      3
+#define STM32_IRQ_EXTI2_3_IRQ_PRIORITY      3
+#define STM32_IRQ_EXTI4_15_IRQ_PRIORITY     3
+#define STM32_IRQ_EXTI16_IRQ_PRIORITY       3
+#define STM32_IRQ_EXTI17_20_IRQ_PRIORITY    3
+#define STM32_IRQ_EXTI21_22_IRQ_PRIORITY    3
+
+/*
+ * ADC driver system settings.
+ */
+#define STM32_ADC_USE_ADC1                  TRUE
+#define STM32_ADC_ADC1_CKMODE               STM32_ADC_CKMODE_ADCCLK
+#define STM32_ADC_ADC1_DMA_PRIORITY         2
+#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY     2
+#define STM32_ADC_ADC1_DMA_STREAM           STM32_DMA_STREAM_ID(1, 1)
+
+/*
+ * GPT driver system settings.
+ */
+#define STM32_GPT_USE_TIM1                  FALSE
+#define STM32_GPT_USE_TIM2                  FALSE
+#define STM32_GPT_USE_TIM3                  FALSE
+#define STM32_GPT_USE_TIM14                 FALSE
+#define STM32_GPT_TIM1_IRQ_PRIORITY         2
+#define STM32_GPT_TIM2_IRQ_PRIORITY         2
+#define STM32_GPT_TIM3_IRQ_PRIORITY         2
+#define STM32_GPT_TIM14_IRQ_PRIORITY        2
+
+/*
+ * I2C driver system settings.
+ */
+#define STM32_I2C_USE_I2C1                  FALSE
+#define STM32_I2C_USE_I2C2                  FALSE
+#define STM32_I2C_BUSY_TIMEOUT              50
+#define STM32_I2C_I2C1_IRQ_PRIORITY         3
+#define STM32_I2C_I2C2_IRQ_PRIORITY         3
+#define STM32_I2C_USE_DMA                   TRUE
+#define STM32_I2C_I2C1_DMA_PRIORITY         1
+#define STM32_I2C_I2C2_DMA_PRIORITY         1
+#define STM32_I2C_I2C1_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 3)
+#define STM32_I2C_I2C1_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 2)
+#define STM32_I2C_I2C2_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 5)
+#define STM32_I2C_I2C2_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 4)
+#define STM32_I2C_DMA_ERROR_HOOK(i2cp)      osalSysHalt("DMA failure")
+
+/*
+ * I2S driver system settings.
+ */
+#define STM32_I2S_USE_SPI1                  FALSE
+#define STM32_I2S_USE_SPI2                  FALSE
+#define STM32_I2S_SPI1_MODE                 (STM32_I2S_MODE_MASTER |        \
+                                             STM32_I2S_MODE_RX)
+#define STM32_I2S_SPI2_MODE                 (STM32_I2S_MODE_MASTER |        \
+                                             STM32_I2S_MODE_RX)
+#define STM32_I2S_SPI1_IRQ_PRIORITY         2
+#define STM32_I2S_SPI2_IRQ_PRIORITY         2
+#define STM32_I2S_SPI1_DMA_PRIORITY         1
+#define STM32_I2S_SPI2_DMA_PRIORITY         1
+#define STM32_I2S_SPI1_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 2)
+#define STM32_I2S_SPI1_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 3)
+#define STM32_I2S_SPI2_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 4)
+#define STM32_I2S_SPI2_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 5)
+#define STM32_I2S_DMA_ERROR_HOOK(i2sp)      osalSysHalt("DMA failure")
+
+/*
+ * ICU driver system settings.
+ */
+#define STM32_ICU_USE_TIM1                  FALSE
+#define STM32_ICU_USE_TIM2                  FALSE
+#define STM32_ICU_USE_TIM3                  FALSE
+#define STM32_ICU_TIM1_IRQ_PRIORITY         3
+#define STM32_ICU_TIM2_IRQ_PRIORITY         3
+#define STM32_ICU_TIM3_IRQ_PRIORITY         3
+
+/*
+ * PWM driver system settings.
+ */
+#define STM32_PWM_USE_ADVANCED              FALSE
+#define STM32_PWM_USE_TIM1                  FALSE
+#define STM32_PWM_USE_TIM2                  FALSE
+#define STM32_PWM_USE_TIM3                  FALSE
+#define STM32_PWM_TIM1_IRQ_PRIORITY         3
+#define STM32_PWM_TIM2_IRQ_PRIORITY         3
+#define STM32_PWM_TIM3_IRQ_PRIORITY         3
+
+/*
+ * SERIAL driver system settings.
+ */
+#define STM32_SERIAL_USE_USART1             FALSE
+#define STM32_SERIAL_USE_USART2             FALSE
+#define STM32_SERIAL_USART1_PRIORITY        3
+#define STM32_SERIAL_USART2_PRIORITY        3
+
+/*
+ * SPI driver system settings.
+ */
+#define STM32_SPI_USE_SPI1                  FALSE
+#define STM32_SPI_USE_SPI2                  FALSE
+#define STM32_SPI_SPI1_DMA_PRIORITY         1
+#define STM32_SPI_SPI2_DMA_PRIORITY         1
+#define STM32_SPI_SPI1_IRQ_PRIORITY         2
+#define STM32_SPI_SPI2_IRQ_PRIORITY         2
+#define STM32_SPI_SPI1_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 2)
+#define STM32_SPI_SPI1_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 3)
+#define STM32_SPI_SPI2_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 4)
+#define STM32_SPI_SPI2_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 5)
+#define STM32_SPI_DMA_ERROR_HOOK(spip)      osalSysHalt("DMA failure")
+
+/*
+ * ST driver system settings.
+ */
+#define STM32_ST_IRQ_PRIORITY               2
+#define STM32_ST_USE_TIMER                  2
+
+/*
+ * UART driver system settings.
+ */
+#define STM32_UART_USE_USART1               FALSE
+#define STM32_UART_USE_USART2               FALSE
+#define STM32_UART_USART1_IRQ_PRIORITY      3
+#define STM32_UART_USART2_IRQ_PRIORITY      3
+#define STM32_UART_USART1_DMA_PRIORITY      0
+#define STM32_UART_USART2_DMA_PRIORITY      0
+#define STM32_UART_USART1_RX_DMA_STREAM     STM32_DMA_STREAM_ID(1, 3)
+#define STM32_UART_USART1_TX_DMA_STREAM     STM32_DMA_STREAM_ID(1, 2)
+#define STM32_UART_USART2_RX_DMA_STREAM     STM32_DMA_STREAM_ID(1, 5)
+#define STM32_UART_USART2_TX_DMA_STREAM     STM32_DMA_STREAM_ID(1, 4)
+#define STM32_UART_DMA_ERROR_HOOK(uartp)    osalSysHalt("DMA failure")
+
+/*
+ * WDG driver system settings.
+ */
+#define STM32_WDG_USE_IWDG                  FALSE
+
+#include "mcuconf_community.h"
+
+#endif /* MCUCONF_H */
diff --git a/testhal/STM32/STM32F0xx/crc/mcuconf_community.h b/testhal/STM32/STM32F0xx/crc/mcuconf_community.h
index bbd2608..cf6a1ce 100644
--- a/testhal/STM32/STM32F0xx/crc/mcuconf_community.h
+++ b/testhal/STM32/STM32F0xx/crc/mcuconf_community.h
@@ -1,5 +1,5 @@
 /*
-    ChibiOS/RT - Copyright (C) 2015 Michael D. Spradling
+    ChibiOS/RT - Copyright (C) 2014 Uladzimir Pylinsky aka barthess
 
     Licensed under the Apache License, Version 2.0 (the "License");
     you may not use this file except in compliance with the License.
@@ -14,8 +14,94 @@
     limitations under the License.
 */
 
-#ifndef MCUCONF_COMMUNITY_H
-#define MCUCONF_COMMUNITY_H
+/*
+ * FSMC driver system settings.
+ */
+#define STM32_FSMC_USE_FSMC1                FALSE
+#define STM32_FSMC_FSMC1_IRQ_PRIORITY       10
+
+/*
+ * FSMC NAND driver system settings.
+ */
+#define STM32_NAND_USE_FSMC_NAND1           FALSE
+#define STM32_NAND_USE_FSMC_NAND2           FALSE
+#define STM32_NAND_USE_EXT_INT              FALSE
+#define STM32_NAND_DMA_STREAM               STM32_DMA_STREAM_ID(2, 7)
+#define STM32_NAND_DMA_PRIORITY             0
+#define STM32_NAND_DMA_ERROR_HOOK(nandp)    osalSysHalt("DMA failure")
+
+/*
+ * FSMC SRAM driver system settings.
+ */
+#define STM32_USE_FSMC_SRAM                 FALSE
+#define STM32_SRAM_USE_FSMC_SRAM1           FALSE
+#define STM32_SRAM_USE_FSMC_SRAM2           FALSE
+#define STM32_SRAM_USE_FSMC_SRAM3           FALSE
+#define STM32_SRAM_USE_FSMC_SRAM4           FALSE
+
+/*
+ * FSMC SDRAM driver system settings.
+ */
+#define STM32_USE_FSMC_SDRAM                FALSE
+
+/*
+ * TIMCAP driver system settings.
+ */
+#define STM32_TIMCAP_USE_TIM1                  TRUE
+#define STM32_TIMCAP_USE_TIM2                  FALSE
+#define STM32_TIMCAP_USE_TIM3                  TRUE
+#define STM32_TIMCAP_USE_TIM4                  TRUE
+#define STM32_TIMCAP_USE_TIM5                  TRUE
+#define STM32_TIMCAP_USE_TIM8                  TRUE
+#define STM32_TIMCAP_USE_TIM9                  TRUE
+#define STM32_TIMCAP_TIM1_IRQ_PRIORITY         3
+#define STM32_TIMCAP_TIM2_IRQ_PRIORITY         3
+#define STM32_TIMCAP_TIM3_IRQ_PRIORITY         3
+#define STM32_TIMCAP_TIM4_IRQ_PRIORITY         3
+#define STM32_TIMCAP_TIM5_IRQ_PRIORITY         3
+#define STM32_TIMCAP_TIM8_IRQ_PRIORITY         3
+#define STM32_TIMCAP_TIM9_IRQ_PRIORITY         3
+
+/*
+ * COMP driver system settings.
+ */
+#define STM32_COMP_USE_COMP1                  TRUE
+#define STM32_COMP_USE_COMP2                  TRUE
+#define STM32_COMP_USE_COMP3                  TRUE
+#define STM32_COMP_USE_COMP4                  TRUE
+#define STM32_COMP_USE_COMP5                  TRUE
+#define STM32_COMP_USE_COMP6                  TRUE
+#define STM32_COMP_USE_COMP7                  TRUE
+
+#define STM32_COMP_USE_INTERRUPTS             TRUE
+#define STM32_COMP_1_2_3_IRQ_PRIORITY         5
+#define STM32_COMP_4_5_6_IRQ_PRIORITY         5
+#define STM32_COMP_7_IRQ_PRIORITY             5
+
+#if STM32_COMP_USE_INTERRUPTS
+#define STM32_DISABLE_EXTI21_22_29_HANDLER
+#define STM32_DISABLE_EXTI30_32_HANDLER
+#define STM32_DISABLE_EXTI33_HANDLER
+#endif
+
+/*
+ * USBH driver system settings.
+ */
+#define STM32_OTG1_CHANNELS_NUMBER          8
+#define STM32_OTG2_CHANNELS_NUMBER          12
+
+#define STM32_USBH_USE_OTG1                 1
+#define STM32_OTG1_RXFIFO_SIZE              1024
+#define STM32_OTG1_PTXFIFO_SIZE             128
+#define STM32_OTG1_NPTXFIFO_SIZE            128
+
+#define STM32_USBH_USE_OTG2                 0
+#define STM32_OTG2_RXFIFO_SIZE              2048
+#define STM32_OTG2_PTXFIFO_SIZE             1024
+#define STM32_OTG2_NPTXFIFO_SIZE            1024
+
+#define STM32_USBH_MIN_QSPACE               4
+#define STM32_USBH_CHANNELS_NP              4
 
 /*
  * CRC driver system settings.
@@ -30,4 +116,40 @@
 #define CRCSW_CRC16_TABLE                   TRUE
 #define CRCSW_PROGRAMMABLE                  TRUE
 
-#endif /* MCUCONF_COMMUNITY_H */
+/*
+ * EICU driver system settings.
+ */
+#define STM32_EICU_USE_TIM1                 TRUE
+#define STM32_EICU_USE_TIM2                 FALSE
+#define STM32_EICU_USE_TIM3                 TRUE
+#define STM32_EICU_USE_TIM4                 TRUE
+#define STM32_EICU_USE_TIM5                 TRUE
+#define STM32_EICU_USE_TIM8                 TRUE
+#define STM32_EICU_USE_TIM9                 TRUE
+#define STM32_EICU_USE_TIM10                TRUE
+#define STM32_EICU_USE_TIM11                TRUE
+#define STM32_EICU_USE_TIM12                TRUE
+#define STM32_EICU_USE_TIM13                TRUE
+#define STM32_EICU_USE_TIM14                TRUE
+#define STM32_EICU_TIM1_IRQ_PRIORITY        7
+#define STM32_EICU_TIM2_IRQ_PRIORITY        7
+#define STM32_EICU_TIM3_IRQ_PRIORITY        7
+#define STM32_EICU_TIM4_IRQ_PRIORITY        7
+#define STM32_EICU_TIM5_IRQ_PRIORITY        7
+#define STM32_EICU_TIM8_IRQ_PRIORITY        7
+#define STM32_EICU_TIM9_IRQ_PRIORITY        7
+#define STM32_EICU_TIM10_IRQ_PRIORITY       7
+#define STM32_EICU_TIM11_IRQ_PRIORITY       7
+#define STM32_EICU_TIM12_IRQ_PRIORITY       7
+#define STM32_EICU_TIM13_IRQ_PRIORITY       7
+#define STM32_EICU_TIM14_IRQ_PRIORITY       7
+
+/*
+ * QEI driver system settings.
+ */
+#define STM32_QEI_USE_TIM1                TRUE
+#define STM32_QEI_USE_TIM2                FALSE
+#define STM32_QEI_USE_TIM3                TRUE
+#define STM32_QEI_TIM1_IRQ_PRIORITY         3
+#define STM32_QEI_TIM2_IRQ_PRIORITY         3
+#define STM32_QEI_TIM3_IRQ_PRIORITY         3