diff options
Diffstat (limited to 'os/hal/ports/KINETIS/KL2x/pal_lld.h')
| -rw-r--r-- | os/hal/ports/KINETIS/KL2x/pal_lld.h | 331 |
1 files changed, 0 insertions, 331 deletions
diff --git a/os/hal/ports/KINETIS/KL2x/pal_lld.h b/os/hal/ports/KINETIS/KL2x/pal_lld.h deleted file mode 100644 index 8b38709..0000000 --- a/os/hal/ports/KINETIS/KL2x/pal_lld.h +++ /dev/null @@ -1,331 +0,0 @@ -/*
- ChibiOS - Copyright (C) 2013-2015 Fabio Utzig
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-
-/**
- * @file KL2x/pal_lld.h
- * @brief Kinetis KL2x PAL subsystem low level driver header.
- *
- * @addtogroup PAL
- * @{
- */
-
-#ifndef _PAL_LLD_H_
-#define _PAL_LLD_H_
-
-#if HAL_USE_PAL || defined(__DOXYGEN__)
-
-/*===========================================================================*/
-/* Unsupported modes and specific modes */
-/*===========================================================================*/
-
-#undef PAL_MODE_OUTPUT_OPENDRAIN
-
-#define PAL_MODE_ALTERNATIVE_1 0x10
-#define PAL_MODE_ALTERNATIVE_2 0x11
-#define PAL_MODE_ALTERNATIVE_3 0x12
-#define PAL_MODE_ALTERNATIVE_4 0x13
-#define PAL_MODE_ALTERNATIVE_5 0x14
-#define PAL_MODE_ALTERNATIVE_6 0x15
-#define PAL_MODE_ALTERNATIVE_7 0x16
-
-/*===========================================================================*/
-/* I/O Ports Types and constants. */
-/*===========================================================================*/
-
-#define TOTAL_PORTS 5
-#define PADS_PER_PORT 32
-
-/**
- * @brief Digital I/O port sized unsigned type.
- */
-typedef uint32_t ioportmask_t;
-
-/**
- * @brief Digital I/O modes.
- */
-typedef uint8_t iomode_t;
-
-/**
- * @brief Port Identifier.
- * @details This type can be a scalar or some kind of pointer, do not make
- * any assumption about it, use the provided macros when populating
- * variables of this type.
- */
-typedef GPIO_TypeDef * ioportid_t;
-
-typedef struct {
- ioportid_t port;
- iomode_t pads[PADS_PER_PORT];
-} PortConfig;
-
-/**
- * @brief Generic I/O ports static initializer.
- * @details An instance of this structure must be passed to @p palInit() at
- * system startup time in order to initialized the digital I/O
- * subsystem. This represents only the initial setup, specific pads
- * or whole ports can be reprogrammed at later time.
- * @note Implementations may extend this structure to contain more,
- * architecture dependent, fields.
- */
-typedef struct
-{
- PortConfig ports[TOTAL_PORTS];
-} PALConfig;
-
-/**
- * @brief Width, in bits, of an I/O port.
- */
-#define PAL_IOPORTS_WIDTH 32
-
-/**
- * @brief Whole port mask.
- * @brief This macro specifies all the valid bits into a port.
- */
-#define PAL_WHOLE_PORT ((ioportmask_t)0xFFFFFFFF)
-
-
-/*===========================================================================*/
-/* I/O Ports Identifiers. */
-/*===========================================================================*/
-
-/**
- * @brief First I/O port identifier.
- * @details Low level drivers can define multiple ports, it is suggested to
- * use this naming convention.
- */
-#define IOPORT1 GPIOA
-#define IOPORT2 GPIOB
-#define IOPORT3 GPIOC
-#define IOPORT4 GPIOD
-#define IOPORT5 GPIOE
-
-/*===========================================================================*/
-/* Implementation, some of the following macros could be implemented as */
-/* functions, if so please put them in pal_lld.c. */
-/*===========================================================================*/
-
-/**
- * @brief Low level PAL subsystem initialization.
- *
- * @param[in] config architecture-dependent ports configuration
- *
- * @notapi
- */
-#define pal_lld_init(config) _pal_lld_init(config)
-
-/**
- * @brief Reads the physical I/O port states.
- *
- * @param[in] port port identifier
- * @return The port bits.
- *
- * @notapi
- */
-#define pal_lld_readport(port) \
- (port)->PDIR
-
-/**
- * @brief Reads the output latch.
- * @details The purpose of this function is to read back the latched output
- * value.
- *
- * @param[in] port port identifier
- * @return The latched logical states.
- *
- * @notapi
- */
-#define pal_lld_readlatch(port) \
- (port)->PDOR
-
-/**
- * @brief Writes a bits mask on a I/O port.
- *
- * @param[in] port port identifier
- * @param[in] bits bits to be written on the specified port
- *
- * @notapi
- */
-#define pal_lld_writeport(port, bits) \
- (port)->PDOR = (bits)
-
-/**
- * @brief Sets a bits mask on a I/O port.
- * @note The @ref PAL provides a default software implementation of this
- * functionality, implement this function if can optimize it by using
- * special hardware functionalities or special coding.
- *
- * @param[in] port port identifier
- * @param[in] bits bits to be ORed on the specified port
- *
- * @notapi
- */
-#define pal_lld_setport(port, bits) \
- (port)->PSOR = (bits)
-
-/**
- * @brief Clears a bits mask on a I/O port.
- * @note The @ref PAL provides a default software implementation of this
- * functionality, implement this function if can optimize it by using
- * special hardware functionalities or special coding.
- *
- * @param[in] port port identifier
- * @param[in] bits bits to be cleared on the specified port
- *
- * @notapi
- */
-#define pal_lld_clearport(port, bits) \
- (port)->PCOR = (bits)
-
-/**
- * @brief Toggles a bits mask on a I/O port.
- * @note The @ref PAL provides a default software implementation of this
- * functionality, implement this function if can optimize it by using
- * special hardware functionalities or special coding.
- *
- * @param[in] port port identifier
- * @param[in] bits bits to be XORed on the specified port
- *
- * @notapi
- */
-#define pal_lld_toggleport(port, bits) \
- (port)->PTOR = (bits)
-
-/**
- * @brief Reads a group of bits.
- * @note The @ref PAL provides a default software implementation of this
- * functionality, implement this function if can optimize it by using
- * special hardware functionalities or special coding.
- *
- * @param[in] port port identifier
- * @param[in] mask group mask
- * @param[in] offset group bit offset within the port
- * @return The group logical states.
- *
- * @notapi
- */
-#define pal_lld_readgroup(port, mask, offset) 0
-
-/**
- * @brief Writes a group of bits.
- * @note The @ref PAL provides a default software implementation of this
- * functionality, implement this function if can optimize it by using
- * special hardware functionalities or special coding.
- *
- * @param[in] port port identifier
- * @param[in] mask group mask
- * @param[in] offset group bit offset within the port
- * @param[in] bits bits to be written. Values exceeding the group width
- * are masked.
- *
- * @notapi
- */
-#define pal_lld_writegroup(port, mask, offset, bits) (void)bits
-
-/**
- * @brief Pads group mode setup.
- * @details This function programs a pads group belonging to the same port
- * with the specified mode.
- * @note Programming an unknown or unsupported mode is silently ignored.
- *
- * @param[in] port port identifier
- * @param[in] mask group mask
- * @param[in] offset group bit offset within the port
- * @param[in] mode group mode
- *
- * @notapi
- */
-#define pal_lld_setgroupmode(port, mask, offset, mode) \
- _pal_lld_setgroupmode(port, mask << offset, mode)
-
-/**
- * @brief Sets a pad logical state to @p PAL_HIGH.
- * @note The @ref PAL provides a default software implementation of this
- * functionality, implement this function if can optimize it by using
- * special hardware functionalities or special coding.
- *
- * @param[in] port port identifier
- * @param[in] pad pad number within the port
- *
- * @notapi
- */
-#define pal_lld_setpad(port, pad) (port)->PSOR = ((uint32_t) 1 << (pad))
-
-/**
- * @brief Clears a pad logical state to @p PAL_LOW.
- * @note The @ref PAL provides a default software implementation of this
- * functionality, implement this function if can optimize it by using
- * special hardware functionalities or special coding.
- *
- * @param[in] port port identifier
- * @param[in] pad pad number within the port
- *
- * @notapi
- */
-#define pal_lld_clearpad(port, pad) (port)->PCOR = ((uint32_t) 1 << (pad))
-
-/**
- * @brief Toggles a pad logical state.
- * @note The @ref PAL provides a default software implementation of this
- * functionality, implement this function if can optimize it by using
- * special hardware functionalities or special coding.
- *
- * @param[in] port port identifier
- * @param[in] pad pad number within the port
- *
- * @notapi
- */
-#define pal_lld_togglepad(port, pad) (port)->PTOR = ((uint32_t) 1 << (pad))
-
-/**
- * @brief Pad mode setup.
- * @details This function programs a pad with the specified mode.
- * @note The @ref PAL provides a default software implementation of this
- * functionality, implement this function if can optimize it by using
- * special hardware functionalities or special coding.
- * @note Programming an unknown or unsupported mode is silently ignored.
- *
- * @param[in] port port identifier
- * @param[in] pad pad number within the port
- * @param[in] mode pad mode
- *
- * @notapi
- */
-#define pal_lld_setpadmode(port, pad, mode) \
- _pal_lld_setpadmode(port, pad, mode)
-
-#if !defined(__DOXYGEN__)
-extern const PALConfig pal_default_config;
-#endif
-
-#ifdef __cplusplus
-extern "C" {
-#endif
- void _pal_lld_init(const PALConfig *config);
- void _pal_lld_setgroupmode(ioportid_t port,
- ioportmask_t mask,
- iomode_t mode);
- void pal_lld_setpadmode(ioportid_t port,
- uint8_t pad,
- iomode_t mode);
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* HAL_USE_PAL */
-
-#endif /* _PAL_LLD_H_ */
-
-/** @} */
|