diff options
Diffstat (limited to 'os/common/ext')
-rw-r--r-- | os/common/ext/CMSIS/KINETIS/kl25z.h | 80 | ||||
-rw-r--r-- | os/common/ext/CMSIS/KINETIS/kl26z.h | 82 | ||||
-rw-r--r-- | os/common/ext/CMSIS/KINETIS/kl27zxx.h | 80 | ||||
-rw-r--r-- | os/common/ext/CMSIS/KINETIS/kl27zxxx.h | 80 | ||||
-rw-r--r-- | os/common/ext/CMSIS/KINETIS/kl2xz.h | 82 |
5 files changed, 84 insertions, 320 deletions
diff --git a/os/common/ext/CMSIS/KINETIS/kl25z.h b/os/common/ext/CMSIS/KINETIS/kl25z.h index bf519ab..2f907e1 100644 --- a/os/common/ext/CMSIS/KINETIS/kl25z.h +++ b/os/common/ext/CMSIS/KINETIS/kl25z.h @@ -777,57 +777,9 @@ typedef struct /****************************************************************/ /* */ -/* Inter-Integrated Circuit (I2C) */ +/* Inter-Integrated Circuit (I2C): Device dependent part */ /* */ /****************************************************************/ -/*********** Bits definition for I2Cx_A1 register *************/ -#define I2Cx_A1_AD_MASK ((uint8_t)0xFE) /*!< Address [7:1] */ -#define I2Cx_A1_AD_SHIFT 1 -#define I2Cx_A1_AD(x) ((uint8_t)(((uint8_t)(x) << I2Cx_A1_AD_SHIFT) & I2Cx_A1_AD_MASK) - -/*********** Bits definition for I2Cx_F register **************/ -#define I2Cx_F_MULT_MASK ((uint8_t)0xC0) /*!< Multiplier factor */ -#define I2Cx_F_MULT_SHIFT 6 -#define I2Cx_F_MULT(x) ((uint8_t)(((uint8_t)(x) << I2Cx_F_MULT_SHIFT) & I2Cx_F_MULT_MASK) -#define I2Cx_F_ICR_MASK ((uint8_t)0x3F) /*!< Clock rate */ -#define I2Cx_F_ICR_SHIFT 0 -#define I2Cx_F_ICR(x) ((uint8_t)(((uint8_t)(x) << I2Cx_F_ICR_SHIFT) & I2Cx_F_ICR_MASK) - -/*********** Bits definition for I2Cx_C1 register *************/ -#define I2Cx_C1_IICEN ((uint8_t)0x80) /*!< I2C Enable */ -#define I2Cx_C1_IICIE ((uint8_t)0x40) /*!< I2C Interrupt Enable */ -#define I2Cx_C1_MST ((uint8_t)0x20) /*!< Master Mode Select */ -#define I2Cx_C1_TX ((uint8_t)0x10) /*!< Transmit Mode Select */ -#define I2Cx_C1_TXAK ((uint8_t)0x08) /*!< Transmit Acknowledge Enable */ -#define I2Cx_C1_RSTA ((uint8_t)0x04) /*!< Repeat START */ -#define I2Cx_C1_WUEN ((uint8_t)0x02) /*!< Wakeup Enable */ -#define I2Cx_C1_DMAEN ((uint8_t)0x01) /*!< DMA Enable */ - -/*********** Bits definition for I2Cx_S register **************/ -#define I2Cx_S_TCF ((uint8_t)0x80) /*!< Transfer Complete Flag */ -#define I2Cx_S_IAAS ((uint8_t)0x40) /*!< Addressed As A Slave */ -#define I2Cx_S_BUSY ((uint8_t)0x20) /*!< Bus Busy */ -#define I2Cx_S_ARBL ((uint8_t)0x10) /*!< Arbitration Lost */ -#define I2Cx_S_RAM ((uint8_t)0x08) /*!< Range Address Match */ -#define I2Cx_S_SRW ((uint8_t)0x04) /*!< Slave Read/Write */ -#define I2Cx_S_IICIF ((uint8_t)0x02) /*!< Interrupt Flag */ -#define I2Cx_S_RXAK ((uint8_t)0x01) /*!< Receive Acknowledge */ - -/*********** Bits definition for I2Cx_D register **************/ -#define I2Cx_D_DATA_SHIFT 0 /*!< Data */ -#define I2Cx_D_DATA_MASK ((uint8_t)((uint8_t)0xFF << I2Cx_D_DATA_SHIFT)) -#define I2Cx_D_DATA(x) ((uint8_t)(((uint8_t)(x) << I2Cx_D_DATA_SHIFT) & I2Cx_D_DATA_MASK)) - -/*********** Bits definition for I2Cx_C2 register *************/ -#define I2Cx_C2_GCAEN ((uint8_t)0x80) /*!< General Call Address Enable */ -#define I2Cx_C2_ADEXT ((uint8_t)0x40) /*!< Address Extension */ -#define I2Cx_C2_HDRS ((uint8_t)0x20) /*!< High Drive Select */ -#define I2Cx_C2_SBRC ((uint8_t)0x10) /*!< Slave Baud Rate Control */ -#define I2Cx_C2_RMEN ((uint8_t)0x08) /*!< Range Address Matching Enable */ -#define I2Cx_C2_AD_SHIFT 0 /*!< Slave Address [10:8] */ -#define I2Cx_C2_AD_MASK ((uint8_t)((uint8_t)0x7 << I2Cx_C2_AD_SHIFT)) -#define I2Cx_C2_AD(x) ((uint8_t)(((uint8_t)(x) << I2Cx_C2_AD_SHIFT) & I2Cx_C2_AD_MASK)) - /*********** Bits definition for I2Cx_FLT register ************/ #define I2Cx_FLT_SHEN ((uint8_t)0x80) /*!< Stop Hold Enable */ #define I2Cx_FLT_STOPF ((uint8_t)0x40) /*!< I2C Bus Stop Detect Flag */ @@ -836,36 +788,6 @@ typedef struct #define I2Cx_FLT_FLT_MASK ((uint8_t)((uint8_t)0x1F << I2Cx_FLT_FLT_SHIFT)) #define I2Cx_FLT_FLT(x) ((uint8_t)(((uint8_t)(x) << I2Cx_FLT_FLT_SHIFT) & I2Cx_FLT_FLT_MASK)) -/*********** Bits definition for I2Cx_RA register *************/ -#define I2Cx_RA_RAD_SHIFT 1 /*!< Range Slave Address */ -#define I2Cx_RA_RAD_MASK ((uint8_t)((uint8_t)0x7F << I2Cx_RA_RAD_SHIFT)) -#define I2Cx_RA_RAD(x) ((uint8_t)(((uint8_t)(x) << I2Cx_RA_RAD_SHIFT) & I2Cx_RA_RAD_MASK)) - -/*********** Bits definition for I2Cx_SMB register ************/ -#define I2Cx_SMB_FACK ((uint8_t)0x80) /*!< Fast NACK/ACK Enable */ -#define I2Cx_SMB_ALERTEN ((uint8_t)0x40) /*!< SMBus Alert Response Address Enable */ -#define I2Cx_SMB_SIICAEN ((uint8_t)0x20) /*!< Second I2C Address Enable */ -#define I2Cx_SMB_TCKSEL ((uint8_t)0x10) /*!< Timeout Counter Clock Select */ -#define I2Cx_SMB_SLTF ((uint8_t)0x08) /*!< SCL Low Timeout Flag */ -#define I2Cx_SMB_SHTF1 ((uint8_t)0x04) /*!< SCL High Timeout Flag 1 */ -#define I2Cx_SMB_SHTF2 ((uint8_t)0x02) /*!< SCL High Timeout Flag 2 */ -#define I2Cx_SMB_SHTF2IE ((uint8_t)0x01) /*!< SHTF2 Interrupt Enable */ - -/*********** Bits definition for I2Cx_A2 register *************/ -#define I2Cx_A2_SAD_SHIFT 1 /*!< SMBus Address */ -#define I2Cx_A2_SAD_MASK ((uint8_t)((uint8_t)0x7F << I2Cx_A2_SAD_SHIFT)) -#define I2Cx_A2_SAD(x) ((uint8_t)(((uint8_t)(x) << I2Cx_A2_SAD_SHIFT) & I2Cx_A2_SAD_MASK)) - -/*********** Bits definition for I2Cx_SLTH register ***********/ -#define I2Cx_SLTH_SSLT_SHIFT 0 /*!< MSB of SCL low timeout value */ -#define I2Cx_SLTH_SSLT_MASK ((uint8_t)((uint8_t)0xFF << I2Cx_SLTH_SSLT_SHIFT)) -#define I2Cx_SLTH_SSLT(x) ((uint8_t)(((uint8_t)(x) << I2Cx_SLTH_SSLT_SHIFT) & I2Cx_SLTH_SSLT_MASK)) - -/*********** Bits definition for I2Cx_SLTL register ***********/ -#define I2Cx_SLTL_SSLT_SHIFT 0 /*!< LSB of SCL low timeout value */ -#define I2Cx_SLTL_SSLT_MASK ((uint8_t)((uint8_t)0xFF << I2Cx_SLTL_SSLT_SHIFT)) -#define I2Cx_SLTL_SSLT(x) ((uint8_t)(((uint8_t)(x) << I2Cx_SLTL_SSLT_SHIFT) & I2Cx_SLTL_SSLT_MASK)) - /****************************************************************/ /* */ /* Universal Asynchronous Receiver/Transmitter (UART) */ diff --git a/os/common/ext/CMSIS/KINETIS/kl26z.h b/os/common/ext/CMSIS/KINETIS/kl26z.h index 2c63f12..eefcfd6 100644 --- a/os/common/ext/CMSIS/KINETIS/kl26z.h +++ b/os/common/ext/CMSIS/KINETIS/kl26z.h @@ -152,7 +152,7 @@ typedef struct __IO uint8_t A1; __IO uint8_t F; __IO uint8_t C1; - __IO uint8_t S1; + __IO uint8_t S; /* Denoted 'S1' in datasheet. */ __IO uint8_t D; __IO uint8_t C2; __IO uint8_t FLT; @@ -849,57 +849,9 @@ typedef struct { /****************************************************************/ /* */ -/* Inter-Integrated Circuit (I2C) */ +/* Inter-Integrated Circuit (I2C): Device dependent part */ /* */ /****************************************************************/ -/*********** Bits definition for I2Cx_A1 register *************/ -#define I2Cx_A1_AD_MASK ((uint8_t)0xFE) /*!< Address [7:1] */ -#define I2Cx_A1_AD_SHIFT 1 -#define I2Cx_A1_AD(x) ((uint8_t)(((uint8_t)(x) << I2Cx_A1_AD_SHIFT) & I2Cx_A1_AD_MASK) - -/*********** Bits definition for I2Cx_F register **************/ -#define I2Cx_F_MULT_MASK ((uint8_t)0xC0) /*!< Multiplier factor */ -#define I2Cx_F_MULT_SHIFT 6 -#define I2Cx_F_MULT(x) ((uint8_t)(((uint8_t)(x) << I2Cx_F_MULT_SHIFT) & I2Cx_F_MULT_MASK) -#define I2Cx_F_ICR_MASK ((uint8_t)0x3F) /*!< Clock rate */ -#define I2Cx_F_ICR_SHIFT 0 -#define I2Cx_F_ICR(x) ((uint8_t)(((uint8_t)(x) << I2Cx_F_ICR_SHIFT) & I2Cx_F_ICR_MASK) - -/*********** Bits definition for I2Cx_C1 register *************/ -#define I2Cx_C1_IICEN ((uint8_t)0x80) /*!< I2C Enable */ -#define I2Cx_C1_IICIE ((uint8_t)0x40) /*!< I2C Interrupt Enable */ -#define I2Cx_C1_MST ((uint8_t)0x20) /*!< Master Mode Select */ -#define I2Cx_C1_TX ((uint8_t)0x10) /*!< Transmit Mode Select */ -#define I2Cx_C1_TXAK ((uint8_t)0x08) /*!< Transmit Acknowledge Enable */ -#define I2Cx_C1_RSTA ((uint8_t)0x04) /*!< Repeat START */ -#define I2Cx_C1_WUEN ((uint8_t)0x02) /*!< Wakeup Enable */ -#define I2Cx_C1_DMAEN ((uint8_t)0x01) /*!< DMA Enable */ - -/*********** Bits definition for I2Cx_S1 register *************/ -#define I2Cx_S1_TCF ((uint8_t)0x80) /*!< Transfer Complete Flag */ -#define I2Cx_S1_IAAS ((uint8_t)0x40) /*!< Addressed As A Slave */ -#define I2Cx_S1_BUSY ((uint8_t)0x20) /*!< Bus Busy */ -#define I2Cx_S1_ARBL ((uint8_t)0x10) /*!< Arbitration Lost */ -#define I2Cx_S1_RAM ((uint8_t)0x08) /*!< Range Address Match */ -#define I2Cx_S1_SRW ((uint8_t)0x04) /*!< Slave Read/Write */ -#define I2Cx_S1_IICIF ((uint8_t)0x02) /*!< Interrupt Flag */ -#define I2Cx_S1_RXAK ((uint8_t)0x01) /*!< Receive Acknowledge */ - -/*********** Bits definition for I2Cx_D register **************/ -#define I2Cx_D_DATA_SHIFT 0 /*!< Data */ -#define I2Cx_D_DATA_MASK ((uint8_t)((uint8_t)0xFF << I2Cx_D_DATA_SHIFT)) -#define I2Cx_D_DATA(x) ((uint8_t)(((uint8_t)(x) << I2Cx_D_DATA_SHIFT) & I2Cx_D_DATA_MASK)) - -/*********** Bits definition for I2Cx_C2 register *************/ -#define I2Cx_C2_GCAEN ((uint8_t)0x80) /*!< General Call Address Enable */ -#define I2Cx_C2_ADEXT ((uint8_t)0x40) /*!< Address Extension */ -#define I2Cx_C2_HDRS ((uint8_t)0x20) /*!< High Drive Select */ -#define I2Cx_C2_SBRC ((uint8_t)0x10) /*!< Slave Baud Rate Control */ -#define I2Cx_C2_RMEN ((uint8_t)0x08) /*!< Range Address Matching Enable */ -#define I2Cx_C2_AD_SHIFT 0 /*!< Slave Address [10:8] */ -#define I2Cx_C2_AD_MASK ((uint8_t)((uint8_t)0x7 << I2Cx_C2_AD_SHIFT)) -#define I2Cx_C2_AD(x) ((uint8_t)(((uint8_t)(x) << I2Cx_C2_AD_SHIFT) & I2Cx_C2_AD_MASK)) - /*********** Bits definition for I2Cx_FLT register ************/ #define I2Cx_FLT_SHEN ((uint8_t)0x80) /*!< Stop Hold Enable */ #define I2Cx_FLT_STOPF ((uint8_t)0x40) /*!< I2C Bus Stop Detect Flag */ @@ -908,36 +860,6 @@ typedef struct { #define I2Cx_FLT_FLT_MASK ((uint8_t)((uint8_t)0x1F << I2Cx_FLT_FLT_SHIFT)) #define I2Cx_FLT_FLT(x) ((uint8_t)(((uint8_t)(x) << I2Cx_FLT_FLT_SHIFT) & I2Cx_FLT_FLT_MASK)) -/*********** Bits definition for I2Cx_RA register *************/ -#define I2Cx_RA_RAD_SHIFT 1 /*!< Range Slave Address */ -#define I2Cx_RA_RAD_MASK ((uint8_t)((uint8_t)0x7F << I2Cx_RA_RAD_SHIFT)) -#define I2Cx_RA_RAD(x) ((uint8_t)(((uint8_t)(x) << I2Cx_RA_RAD_SHIFT) & I2Cx_RA_RAD_MASK)) - -/*********** Bits definition for I2Cx_SMB register ************/ -#define I2Cx_SMB_FACK ((uint8_t)0x80) /*!< Fast NACK/ACK Enable */ -#define I2Cx_SMB_ALERTEN ((uint8_t)0x40) /*!< SMBus Alert Response Address Enable */ -#define I2Cx_SMB_SIICAEN ((uint8_t)0x20) /*!< Second I2C Address Enable */ -#define I2Cx_SMB_TCKSEL ((uint8_t)0x10) /*!< Timeout Counter Clock Select */ -#define I2Cx_SMB_SLTF ((uint8_t)0x08) /*!< SCL Low Timeout Flag */ -#define I2Cx_SMB_SHTF1 ((uint8_t)0x04) /*!< SCL High Timeout Flag 1 */ -#define I2Cx_SMB_SHTF2 ((uint8_t)0x02) /*!< SCL High Timeout Flag 2 */ -#define I2Cx_SMB_SHTF2IE ((uint8_t)0x01) /*!< SHTF2 Interrupt Enable */ - -/*********** Bits definition for I2Cx_A2 register *************/ -#define I2Cx_A2_SAD_SHIFT 1 /*!< SMBus Address */ -#define I2Cx_A2_SAD_MASK ((uint8_t)((uint8_t)0x7F << I2Cx_A2_SAD_SHIFT)) -#define I2Cx_A2_SAD(x) ((uint8_t)(((uint8_t)(x) << I2Cx_A2_SAD_SHIFT) & I2Cx_A2_SAD_MASK)) - -/*********** Bits definition for I2Cx_SLTH register ***********/ -#define I2Cx_SLTH_SSLT_SHIFT 0 /*!< MSB of SCL low timeout value */ -#define I2Cx_SLTH_SSLT_MASK ((uint8_t)((uint8_t)0xFF << I2Cx_SLTH_SSLT_SHIFT)) -#define I2Cx_SLTH_SSLT(x) ((uint8_t)(((uint8_t)(x) << I2Cx_SLTH_SSLT_SHIFT) & I2Cx_SLTH_SSLT_MASK)) - -/*********** Bits definition for I2Cx_SLTL register ***********/ -#define I2Cx_SLTL_SSLT_SHIFT 0 /*!< LSB of SCL low timeout value */ -#define I2Cx_SLTL_SSLT_MASK ((uint8_t)((uint8_t)0xFF << I2Cx_SLTL_SSLT_SHIFT)) -#define I2Cx_SLTL_SSLT(x) ((uint8_t)(((uint8_t)(x) << I2Cx_SLTL_SSLT_SHIFT) & I2Cx_SLTL_SSLT_MASK)) - /****************************************************************/ /* */ /* Universal Asynchronous Receiver/Transmitter (UART) */ diff --git a/os/common/ext/CMSIS/KINETIS/kl27zxx.h b/os/common/ext/CMSIS/KINETIS/kl27zxx.h index 2a64906..894e172 100644 --- a/os/common/ext/CMSIS/KINETIS/kl27zxx.h +++ b/os/common/ext/CMSIS/KINETIS/kl27zxx.h @@ -757,57 +757,9 @@ typedef struct /****************************************************************/ /* */ -/* Inter-Integrated Circuit (I2C) */ +/* Inter-Integrated Circuit (I2C): Device dependent part */ /* */ /****************************************************************/ -/*********** Bits definition for I2Cx_A1 register *************/ -#define I2Cx_A1_AD_MASK ((uint8_t)0xFE) /*!< Address [7:1] */ -#define I2Cx_A1_AD_SHIFT 1 -#define I2Cx_A1_AD(x) ((uint8_t)(((uint8_t)(x) << I2Cx_A1_AD_SHIFT) & I2Cx_A1_AD_MASK) - -/*********** Bits definition for I2Cx_F register **************/ -#define I2Cx_F_MULT_MASK ((uint8_t)0xC0) /*!< Multiplier factor */ -#define I2Cx_F_MULT_SHIFT 6 -#define I2Cx_F_MULT(x) ((uint8_t)(((uint8_t)(x) << I2Cx_F_MULT_SHIFT) & I2Cx_F_MULT_MASK) -#define I2Cx_F_ICR_MASK ((uint8_t)0x3F) /*!< Clock rate */ -#define I2Cx_F_ICR_SHIFT 0 -#define I2Cx_F_ICR(x) ((uint8_t)(((uint8_t)(x) << I2Cx_F_ICR_SHIFT) & I2Cx_F_ICR_MASK) - -/*********** Bits definition for I2Cx_C1 register *************/ -#define I2Cx_C1_IICEN ((uint8_t)0x80) /*!< I2C Enable */ -#define I2Cx_C1_IICIE ((uint8_t)0x40) /*!< I2C Interrupt Enable */ -#define I2Cx_C1_MST ((uint8_t)0x20) /*!< Master Mode Select */ -#define I2Cx_C1_TX ((uint8_t)0x10) /*!< Transmit Mode Select */ -#define I2Cx_C1_TXAK ((uint8_t)0x08) /*!< Transmit Acknowledge Enable */ -#define I2Cx_C1_RSTA ((uint8_t)0x04) /*!< Repeat START */ -#define I2Cx_C1_WUEN ((uint8_t)0x02) /*!< Wakeup Enable */ -#define I2Cx_C1_DMAEN ((uint8_t)0x01) /*!< DMA Enable */ - -/*********** Bits definition for I2Cx_S register **************/ -#define I2Cx_S_TCF ((uint8_t)0x80) /*!< Transfer Complete Flag */ -#define I2Cx_S_IAAS ((uint8_t)0x40) /*!< Addressed As A Slave */ -#define I2Cx_S_BUSY ((uint8_t)0x20) /*!< Bus Busy */ -#define I2Cx_S_ARBL ((uint8_t)0x10) /*!< Arbitration Lost */ -#define I2Cx_S_RAM ((uint8_t)0x08) /*!< Range Address Match */ -#define I2Cx_S_SRW ((uint8_t)0x04) /*!< Slave Read/Write */ -#define I2Cx_S_IICIF ((uint8_t)0x02) /*!< Interrupt Flag */ -#define I2Cx_S_RXAK ((uint8_t)0x01) /*!< Receive Acknowledge */ - -/*********** Bits definition for I2Cx_D register **************/ -#define I2Cx_D_DATA_SHIFT 0 /*!< Data */ -#define I2Cx_D_DATA_MASK ((uint8_t)((uint8_t)0xFF << I2Cx_D_DATA_SHIFT)) -#define I2Cx_D_DATA(x) ((uint8_t)(((uint8_t)(x) << I2Cx_D_DATA_SHIFT) & I2Cx_D_DATA_MASK)) - -/*********** Bits definition for I2Cx_C2 register *************/ -#define I2Cx_C2_GCAEN ((uint8_t)0x80) /*!< General Call Address Enable */ -#define I2Cx_C2_ADEXT ((uint8_t)0x40) /*!< Address Extension */ -#define I2Cx_C2_HDRS ((uint8_t)0x20) /*!< High Drive Select */ -#define I2Cx_C2_SBRC ((uint8_t)0x10) /*!< Slave Baud Rate Control */ -#define I2Cx_C2_RMEN ((uint8_t)0x08) /*!< Range Address Matching Enable */ -#define I2Cx_C2_AD_SHIFT 0 /*!< Slave Address [10:8] */ -#define I2Cx_C2_AD_MASK ((uint8_t)((uint8_t)0x7 << I2Cx_C2_AD_SHIFT)) -#define I2Cx_C2_AD(x) ((uint8_t)(((uint8_t)(x) << I2Cx_C2_AD_SHIFT) & I2Cx_C2_AD_MASK)) - /*********** Bits definition for I2Cx_FLT register ************/ #define I2Cx_FLT_SHEN ((uint8_t)0x80) /*!< Stop Hold Enable */ #define I2Cx_FLT_STOPF ((uint8_t)0x40) /*!< I2C Bus Stop Detect Flag */ @@ -817,36 +769,6 @@ typedef struct #define I2Cx_FLT_FLT_MASK ((uint8_t)((uint8_t)0x0F << I2Cx_FLT_FLT_SHIFT)) #define I2Cx_FLT_FLT(x) ((uint8_t)(((uint8_t)(x) << I2Cx_FLT_FLT_SHIFT) & I2Cx_FLT_FLT_MASK)) -/*********** Bits definition for I2Cx_RA register *************/ -#define I2Cx_RA_RAD_SHIFT 1 /*!< Range Slave Address */ -#define I2Cx_RA_RAD_MASK ((uint8_t)((uint8_t)0x7F << I2Cx_RA_RAD_SHIFT)) -#define I2Cx_RA_RAD(x) ((uint8_t)(((uint8_t)(x) << I2Cx_RA_RAD_SHIFT) & I2Cx_RA_RAD_MASK)) - -/*********** Bits definition for I2Cx_SMB register ************/ -#define I2Cx_SMB_FACK ((uint8_t)0x80) /*!< Fast NACK/ACK Enable */ -#define I2Cx_SMB_ALERTEN ((uint8_t)0x40) /*!< SMBus Alert Response Address Enable */ -#define I2Cx_SMB_SIICAEN ((uint8_t)0x20) /*!< Second I2C Address Enable */ -#define I2Cx_SMB_TCKSEL ((uint8_t)0x10) /*!< Timeout Counter Clock Select */ -#define I2Cx_SMB_SLTF ((uint8_t)0x08) /*!< SCL Low Timeout Flag */ -#define I2Cx_SMB_SHTF1 ((uint8_t)0x04) /*!< SCL High Timeout Flag 1 */ -#define I2Cx_SMB_SHTF2 ((uint8_t)0x02) /*!< SCL High Timeout Flag 2 */ -#define I2Cx_SMB_SHTF2IE ((uint8_t)0x01) /*!< SHTF2 Interrupt Enable */ - -/*********** Bits definition for I2Cx_A2 register *************/ -#define I2Cx_A2_SAD_SHIFT 1 /*!< SMBus Address */ -#define I2Cx_A2_SAD_MASK ((uint8_t)((uint8_t)0x7F << I2Cx_A2_SAD_SHIFT)) -#define I2Cx_A2_SAD(x) ((uint8_t)(((uint8_t)(x) << I2Cx_A2_SAD_SHIFT) & I2Cx_A2_SAD_MASK)) - -/*********** Bits definition for I2Cx_SLTH register ***********/ -#define I2Cx_SLTH_SSLT_SHIFT 0 /*!< MSB of SCL low timeout value */ -#define I2Cx_SLTH_SSLT_MASK ((uint8_t)((uint8_t)0xFF << I2Cx_SLTH_SSLT_SHIFT)) -#define I2Cx_SLTH_SSLT(x) ((uint8_t)(((uint8_t)(x) << I2Cx_SLTH_SSLT_SHIFT) & I2Cx_SLTH_SSLT_MASK)) - -/*********** Bits definition for I2Cx_SLTL register ***********/ -#define I2Cx_SLTL_SSLT_SHIFT 0 /*!< LSB of SCL low timeout value */ -#define I2Cx_SLTL_SSLT_MASK ((uint8_t)((uint8_t)0xFF << I2Cx_SLTL_SSLT_SHIFT)) -#define I2Cx_SLTL_SSLT(x) ((uint8_t)(((uint8_t)(x) << I2Cx_SLTL_SSLT_SHIFT) & I2Cx_SLTL_SSLT_MASK)) - /*********** Bits definition for I2Cx_S2 register *************/ #define I2Cx_S2_ERROR ((uint8_t)0x02) /*!< Error flag */ #define I2Cx_S2_EMPTY ((uint8_t)0x01) /*!< Empty flag */ diff --git a/os/common/ext/CMSIS/KINETIS/kl27zxxx.h b/os/common/ext/CMSIS/KINETIS/kl27zxxx.h index 76238c0..a4c966d 100644 --- a/os/common/ext/CMSIS/KINETIS/kl27zxxx.h +++ b/os/common/ext/CMSIS/KINETIS/kl27zxxx.h @@ -783,57 +783,9 @@ typedef struct { /****************************************************************/ /* */ -/* Inter-Integrated Circuit (I2C) */ +/* Inter-Integrated Circuit (I2C): Device dependent part */ /* */ /****************************************************************/ -/*********** Bits definition for I2Cx_A1 register *************/ -#define I2Cx_A1_AD_MASK ((uint8_t)0xFE) /*!< Address [7:1] */ -#define I2Cx_A1_AD_SHIFT 1 -#define I2Cx_A1_AD(x) ((uint8_t)(((uint8_t)(x) << I2Cx_A1_AD_SHIFT) & I2Cx_A1_AD_MASK) - -/*********** Bits definition for I2Cx_F register **************/ -#define I2Cx_F_MULT_MASK ((uint8_t)0xC0) /*!< Multiplier factor */ -#define I2Cx_F_MULT_SHIFT 6 -#define I2Cx_F_MULT(x) ((uint8_t)(((uint8_t)(x) << I2Cx_F_MULT_SHIFT) & I2Cx_F_MULT_MASK) -#define I2Cx_F_ICR_MASK ((uint8_t)0x3F) /*!< Clock rate */ -#define I2Cx_F_ICR_SHIFT 0 -#define I2Cx_F_ICR(x) ((uint8_t)(((uint8_t)(x) << I2Cx_F_ICR_SHIFT) & I2Cx_F_ICR_MASK) - -/*********** Bits definition for I2Cx_C1 register *************/ -#define I2Cx_C1_IICEN ((uint8_t)0x80) /*!< I2C Enable */ -#define I2Cx_C1_IICIE ((uint8_t)0x40) /*!< I2C Interrupt Enable */ -#define I2Cx_C1_MST ((uint8_t)0x20) /*!< Master Mode Select */ -#define I2Cx_C1_TX ((uint8_t)0x10) /*!< Transmit Mode Select */ -#define I2Cx_C1_TXAK ((uint8_t)0x08) /*!< Transmit Acknowledge Enable */ -#define I2Cx_C1_RSTA ((uint8_t)0x04) /*!< Repeat START */ -#define I2Cx_C1_WUEN ((uint8_t)0x02) /*!< Wakeup Enable */ -#define I2Cx_C1_DMAEN ((uint8_t)0x01) /*!< DMA Enable */ - -/*********** Bits definition for I2Cx_S register **************/ -#define I2Cx_S_TCF ((uint8_t)0x80) /*!< Transfer Complete Flag */ -#define I2Cx_S_IAAS ((uint8_t)0x40) /*!< Addressed As A Slave */ -#define I2Cx_S_BUSY ((uint8_t)0x20) /*!< Bus Busy */ -#define I2Cx_S_ARBL ((uint8_t)0x10) /*!< Arbitration Lost */ -#define I2Cx_S_RAM ((uint8_t)0x08) /*!< Range Address Match */ -#define I2Cx_S_SRW ((uint8_t)0x04) /*!< Slave Read/Write */ -#define I2Cx_S_IICIF ((uint8_t)0x02) /*!< Interrupt Flag */ -#define I2Cx_S_RXAK ((uint8_t)0x01) /*!< Receive Acknowledge */ - -/*********** Bits definition for I2Cx_D register **************/ -#define I2Cx_D_DATA_SHIFT 0 /*!< Data */ -#define I2Cx_D_DATA_MASK ((uint8_t)((uint8_t)0xFF << I2Cx_D_DATA_SHIFT)) -#define I2Cx_D_DATA(x) ((uint8_t)(((uint8_t)(x) << I2Cx_D_DATA_SHIFT) & I2Cx_D_DATA_MASK)) - -/*********** Bits definition for I2Cx_C2 register *************/ -#define I2Cx_C2_GCAEN ((uint8_t)0x80) /*!< General Call Address Enable */ -#define I2Cx_C2_ADEXT ((uint8_t)0x40) /*!< Address Extension */ -#define I2Cx_C2_HDRS ((uint8_t)0x20) /*!< High Drive Select */ -#define I2Cx_C2_SBRC ((uint8_t)0x10) /*!< Slave Baud Rate Control */ -#define I2Cx_C2_RMEN ((uint8_t)0x08) /*!< Range Address Matching Enable */ -#define I2Cx_C2_AD_SHIFT 0 /*!< Slave Address [10:8] */ -#define I2Cx_C2_AD_MASK ((uint8_t)((uint8_t)0x7 << I2Cx_C2_AD_SHIFT)) -#define I2Cx_C2_AD(x) ((uint8_t)(((uint8_t)(x) << I2Cx_C2_AD_SHIFT) & I2Cx_C2_AD_MASK)) - /*********** Bits definition for I2Cx_FLT register ************/ #define I2Cx_FLT_SHEN ((uint8_t)0x80) /*!< Stop Hold Enable */ #define I2Cx_FLT_STOPF ((uint8_t)0x40) /*!< I2C Bus Stop Detect Flag */ @@ -843,36 +795,6 @@ typedef struct { #define I2Cx_FLT_FLT_MASK ((uint8_t)((uint8_t)0x0F << I2Cx_FLT_FLT_SHIFT)) #define I2Cx_FLT_FLT(x) ((uint8_t)(((uint8_t)(x) << I2Cx_FLT_FLT_SHIFT) & I2Cx_FLT_FLT_MASK)) -/*********** Bits definition for I2Cx_RA register *************/ -#define I2Cx_RA_RAD_SHIFT 1 /*!< Range Slave Address */ -#define I2Cx_RA_RAD_MASK ((uint8_t)((uint8_t)0x7F << I2Cx_RA_RAD_SHIFT)) -#define I2Cx_RA_RAD(x) ((uint8_t)(((uint8_t)(x) << I2Cx_RA_RAD_SHIFT) & I2Cx_RA_RAD_MASK)) - -/*********** Bits definition for I2Cx_SMB register ************/ -#define I2Cx_SMB_FACK ((uint8_t)0x80) /*!< Fast NACK/ACK Enable */ -#define I2Cx_SMB_ALERTEN ((uint8_t)0x40) /*!< SMBus Alert Response Address Enable */ -#define I2Cx_SMB_SIICAEN ((uint8_t)0x20) /*!< Second I2C Address Enable */ -#define I2Cx_SMB_TCKSEL ((uint8_t)0x10) /*!< Timeout Counter Clock Select */ -#define I2Cx_SMB_SLTF ((uint8_t)0x08) /*!< SCL Low Timeout Flag */ -#define I2Cx_SMB_SHTF1 ((uint8_t)0x04) /*!< SCL High Timeout Flag 1 */ -#define I2Cx_SMB_SHTF2 ((uint8_t)0x02) /*!< SCL High Timeout Flag 2 */ -#define I2Cx_SMB_SHTF2IE ((uint8_t)0x01) /*!< SHTF2 Interrupt Enable */ - -/*********** Bits definition for I2Cx_A2 register *************/ -#define I2Cx_A2_SAD_SHIFT 1 /*!< SMBus Address */ -#define I2Cx_A2_SAD_MASK ((uint8_t)((uint8_t)0x7F << I2Cx_A2_SAD_SHIFT)) -#define I2Cx_A2_SAD(x) ((uint8_t)(((uint8_t)(x) << I2Cx_A2_SAD_SHIFT) & I2Cx_A2_SAD_MASK)) - -/*********** Bits definition for I2Cx_SLTH register ***********/ -#define I2Cx_SLTH_SSLT_SHIFT 0 /*!< MSB of SCL low timeout value */ -#define I2Cx_SLTH_SSLT_MASK ((uint8_t)((uint8_t)0xFF << I2Cx_SLTH_SSLT_SHIFT)) -#define I2Cx_SLTH_SSLT(x) ((uint8_t)(((uint8_t)(x) << I2Cx_SLTH_SSLT_SHIFT) & I2Cx_SLTH_SSLT_MASK)) - -/*********** Bits definition for I2Cx_SLTL register ***********/ -#define I2Cx_SLTL_SSLT_SHIFT 0 /*!< LSB of SCL low timeout value */ -#define I2Cx_SLTL_SSLT_MASK ((uint8_t)((uint8_t)0xFF << I2Cx_SLTL_SSLT_SHIFT)) -#define I2Cx_SLTL_SSLT(x) ((uint8_t)(((uint8_t)(x) << I2Cx_SLTL_SSLT_SHIFT) & I2Cx_SLTL_SSLT_MASK)) - /*********** Bits definition for I2Cx_S2 register *************/ #define I2Cx_S2_ERROR ((uint8_t)0x02) /*!< Error flag */ #define I2Cx_S2_EMPTY ((uint8_t)0x01) /*!< Empty flag */ diff --git a/os/common/ext/CMSIS/KINETIS/kl2xz.h b/os/common/ext/CMSIS/KINETIS/kl2xz.h index 1ff29b1..10dfecf 100644 --- a/os/common/ext/CMSIS/KINETIS/kl2xz.h +++ b/os/common/ext/CMSIS/KINETIS/kl2xz.h @@ -693,11 +693,87 @@ typedef struct /****************************************************************/ /* */ -/* Inter-Integrated Circuit (I2C) */ +/* Inter-Integrated Circuit (I2C): Device independent part */ /* */ /****************************************************************/ - -/* Device dependent */ +/*********** Bits definition for I2Cx_A1 register *************/ +#define I2Cx_A1_AD_MASK ((uint8_t)0xFE) /*!< Address [7:1] */ +#define I2Cx_A1_AD_SHIFT 1 +#define I2Cx_A1_AD(x) ((uint8_t)(((uint8_t)(x) << I2Cx_A1_AD_SHIFT) & I2Cx_A1_AD_MASK) + +/*********** Bits definition for I2Cx_F register **************/ +#define I2Cx_F_MULT_MASK ((uint8_t)0xC0) /*!< Multiplier factor */ +#define I2Cx_F_MULT_SHIFT 6 +#define I2Cx_F_MULT(x) ((uint8_t)(((uint8_t)(x) << I2Cx_F_MULT_SHIFT) & I2Cx_F_MULT_MASK) +#define I2Cx_F_ICR_MASK ((uint8_t)0x3F) /*!< Clock rate */ +#define I2Cx_F_ICR_SHIFT 0 +#define I2Cx_F_ICR(x) ((uint8_t)(((uint8_t)(x) << I2Cx_F_ICR_SHIFT) & I2Cx_F_ICR_MASK) + +/*********** Bits definition for I2Cx_C1 register *************/ +#define I2Cx_C1_IICEN ((uint8_t)0x80) /*!< I2C Enable */ +#define I2Cx_C1_IICIE ((uint8_t)0x40) /*!< I2C Interrupt Enable */ +#define I2Cx_C1_MST ((uint8_t)0x20) /*!< Master Mode Select */ +#define I2Cx_C1_TX ((uint8_t)0x10) /*!< Transmit Mode Select */ +#define I2Cx_C1_TXAK ((uint8_t)0x08) /*!< Transmit Acknowledge Enable */ +#define I2Cx_C1_RSTA ((uint8_t)0x04) /*!< Repeat START */ +#define I2Cx_C1_WUEN ((uint8_t)0x02) /*!< Wakeup Enable */ +#define I2Cx_C1_DMAEN ((uint8_t)0x01) /*!< DMA Enable */ + +/*********** Bits definition for I2Cx_S register **************/ +/*** This register is referred to as 'S1' in KL26Z manual *******/ +#define I2Cx_S_TCF ((uint8_t)0x80) /*!< Transfer Complete Flag */ +#define I2Cx_S_IAAS ((uint8_t)0x40) /*!< Addressed As A Slave */ +#define I2Cx_S_BUSY ((uint8_t)0x20) /*!< Bus Busy */ +#define I2Cx_S_ARBL ((uint8_t)0x10) /*!< Arbitration Lost */ +#define I2Cx_S_RAM ((uint8_t)0x08) /*!< Range Address Match */ +#define I2Cx_S_SRW ((uint8_t)0x04) /*!< Slave Read/Write */ +#define I2Cx_S_IICIF ((uint8_t)0x02) /*!< Interrupt Flag */ +#define I2Cx_S_RXAK ((uint8_t)0x01) /*!< Receive Acknowledge */ + +/*********** Bits definition for I2Cx_D register **************/ +#define I2Cx_D_DATA_SHIFT 0 /*!< Data */ +#define I2Cx_D_DATA_MASK ((uint8_t)((uint8_t)0xFF << I2Cx_D_DATA_SHIFT)) +#define I2Cx_D_DATA(x) ((uint8_t)(((uint8_t)(x) << I2Cx_D_DATA_SHIFT) & I2Cx_D_DATA_MASK)) + +/*********** Bits definition for I2Cx_C2 register *************/ +#define I2Cx_C2_GCAEN ((uint8_t)0x80) /*!< General Call Address Enable */ +#define I2Cx_C2_ADEXT ((uint8_t)0x40) /*!< Address Extension */ +#define I2Cx_C2_HDRS ((uint8_t)0x20) /*!< High Drive Select */ +#define I2Cx_C2_SBRC ((uint8_t)0x10) /*!< Slave Baud Rate Control */ +#define I2Cx_C2_RMEN ((uint8_t)0x08) /*!< Range Address Matching Enable */ +#define I2Cx_C2_AD_SHIFT 0 /*!< Slave Address [10:8] */ +#define I2Cx_C2_AD_MASK ((uint8_t)((uint8_t)0x7 << I2Cx_C2_AD_SHIFT)) +#define I2Cx_C2_AD(x) ((uint8_t)(((uint8_t)(x) << I2Cx_C2_AD_SHIFT) & I2Cx_C2_AD_MASK)) + +/*********** Bits definition for I2Cx_RA register *************/ +#define I2Cx_RA_RAD_SHIFT 1 /*!< Range Slave Address */ +#define I2Cx_RA_RAD_MASK ((uint8_t)((uint8_t)0x7F << I2Cx_RA_RAD_SHIFT)) +#define I2Cx_RA_RAD(x) ((uint8_t)(((uint8_t)(x) << I2Cx_RA_RAD_SHIFT) & I2Cx_RA_RAD_MASK)) + +/*********** Bits definition for I2Cx_SMB register ************/ +#define I2Cx_SMB_FACK ((uint8_t)0x80) /*!< Fast NACK/ACK Enable */ +#define I2Cx_SMB_ALERTEN ((uint8_t)0x40) /*!< SMBus Alert Response Address Enable */ +#define I2Cx_SMB_SIICAEN ((uint8_t)0x20) /*!< Second I2C Address Enable */ +#define I2Cx_SMB_TCKSEL ((uint8_t)0x10) /*!< Timeout Counter Clock Select */ +#define I2Cx_SMB_SLTF ((uint8_t)0x08) /*!< SCL Low Timeout Flag */ +#define I2Cx_SMB_SHTF1 ((uint8_t)0x04) /*!< SCL High Timeout Flag 1 */ +#define I2Cx_SMB_SHTF2 ((uint8_t)0x02) /*!< SCL High Timeout Flag 2 */ +#define I2Cx_SMB_SHTF2IE ((uint8_t)0x01) /*!< SHTF2 Interrupt Enable */ + +/*********** Bits definition for I2Cx_A2 register *************/ +#define I2Cx_A2_SAD_SHIFT 1 /*!< SMBus Address */ +#define I2Cx_A2_SAD_MASK ((uint8_t)((uint8_t)0x7F << I2Cx_A2_SAD_SHIFT)) +#define I2Cx_A2_SAD(x) ((uint8_t)(((uint8_t)(x) << I2Cx_A2_SAD_SHIFT) & I2Cx_A2_SAD_MASK)) + +/*********** Bits definition for I2Cx_SLTH register ***********/ +#define I2Cx_SLTH_SSLT_SHIFT 0 /*!< MSB of SCL low timeout value */ +#define I2Cx_SLTH_SSLT_MASK ((uint8_t)((uint8_t)0xFF << I2Cx_SLTH_SSLT_SHIFT)) +#define I2Cx_SLTH_SSLT(x) ((uint8_t)(((uint8_t)(x) << I2Cx_SLTH_SSLT_SHIFT) & I2Cx_SLTH_SSLT_MASK)) + +/*********** Bits definition for I2Cx_SLTL register ***********/ +#define I2Cx_SLTL_SSLT_SHIFT 0 /*!< LSB of SCL low timeout value */ +#define I2Cx_SLTL_SSLT_MASK ((uint8_t)((uint8_t)0xFF << I2Cx_SLTL_SSLT_SHIFT)) +#define I2Cx_SLTL_SSLT(x) ((uint8_t)(((uint8_t)(x) << I2Cx_SLTL_SSLT_SHIFT) & I2Cx_SLTL_SSLT_MASK)) /****************************************************************/ /* */ |