1 files changed, 70 insertions, 0 deletions
diff --git a/demos/KINETIS/RT-MCHCK-K20-SPI/mcuconf.h b/demos/KINETIS/RT-MCHCK-K20-SPI/mcuconf.h
new file mode 100644
index 0000000..70b86cf
--- /dev/null
+++ b/demos/KINETIS/RT-MCHCK-K20-SPI/mcuconf.h
@@ -0,0 +1,70 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+#ifndef _MCUCONF_H_
+#define _MCUCONF_H_
+
+#define K20x_MCUCONF
+
+/*
+ * HAL driver system settings.
+ */
+
+/* Select the MCU clocking mode below by enabling the appropriate block. */
+
+#define KINETIS_NO_INIT             FALSE
+
+/* FEI mode - 48 MHz with internal 32.768 kHz crystal */
+#define KINETIS_MCG_MODE            KINETIS_MCG_MODE_FEI
+#define KINETIS_MCG_FLL_DMX32       1           /* Fine-tune for 32.768 kHz */
+#define KINETIS_MCG_FLL_DRS         1           /* 1464x FLL factor */
+#define KINETIS_SYSCLK_FREQUENCY    47972352UL  /* 32.768 kHz * 1464 (~48 MHz) */
+
+/* FEE mode - 24 MHz with external 32.768 kHz crystal */
+#if 0
+#define KINETIS_MCG_MODE            KINETIS_MCG_MODE_FEE
+#define KINETIS_MCG_FLL_DMX32       1           /* Fine-tune for 32.768 kHz */
+#define KINETIS_MCG_FLL_DRS         0           /* 732x FLL factor */
+#define KINETIS_MCG_FLL_OUTDIV1     1           /* Divide 48 MHz FLL by 1 => 24 MHz */
+#define KINETIS_MCG_FLL_OUTDIV4     2           /* Divide OUTDIV1 output by 2 => 12 MHz */
+#define KINETIS_SYSCLK_FREQUENCY    23986176UL  /* 32.768 kHz*732 (~24 MHz) */
+#define KINETIS_UART0_CLOCK_FREQ    (32768 * 732) /* FLL output */
+#define KINETIS_UART0_CLOCK_SRC     1           /* Select FLL clock */
+#define KINETIS_BUSCLK_FREQUENCY    (KINETIS_SYSCLK_FREQUENCY / KINETIS_MCG_FLL_OUTDIV4)
+#endif /* 0 */
+
+/* FEE mode - 48 MHz */
+#if 0
+#define KINETIS_MCG_MODE            KINETIS_MCG_MODE_FEE
+#define KINETIS_MCG_FLL_DMX32       1           /* Fine-tune for 32.768 kHz */
+#define KINETIS_MCG_FLL_DRS         1           /* 1464x FLL factor */
+#define KINETIS_MCG_FLL_OUTDIV1     1           /* Divide 48 MHz FLL by 1 => 48 MHz */
+#define KINETIS_MCG_FLL_OUTDIV4     2           /* Divide OUTDIV1 output by 2 => 24 MHz */
+#define KINETIS_SYSCLK_FREQUENCY    47972352UL  /* 32.768 kHz * 1464 (~48 MHz) */
+#endif /* 0 */
+
+/*
+ * SERIAL driver system settings.
+ */
+#define KINETIS_SERIAL_USE_UART0            TRUE
+
+/*
+ * SPI driver system settings.
+ */
+#define KINETIS_SPI_USE_SPI0                TRUE
+#define KINETIS_SPI_SPI0_IRQ_PRIORITY       8
+
+#endif /* _MCUCONF_H_ */