From 34b0f0f0b6ef651bb30878341cba2a28a107d82d Mon Sep 17 00:00:00 2001 From: Tim Date: Wed, 15 Jan 2014 08:35:54 +0100 Subject: readme.txt - formatting --- Readme.txt | 13 +++++++++---- 1 file changed, 9 insertions(+), 4 deletions(-) (limited to 'Readme.txt') diff --git a/Readme.txt b/Readme.txt index 6a9598a..ac2d7db 100644 --- a/Readme.txt +++ b/Readme.txt @@ -14,14 +14,19 @@ Changes This is release 1.11. Please use this at your own risk. The last official release for the DigiSpark is v1.06, which can be found here: https://github.com/micronucleus/micronucleus/tree/v1.06 Changes compared to v1.10: - • The size was reduced further to 1816 bytes, allowing 6380 bytes user space (320 bytes more than in v1.06). - • The bootloader will always start and never quit if no user program was loaded. This allows for much easier driver installation. Use the new "--erase-only" function of the command line tool to create a clean device. - • New entrymodes have been added. See firmware release notes and source code comments for details. + • The size was reduced further to 1816 bytes, allowing 6380 bytes user space. + (320 bytes more than in v1.06) + • The bootloader will always start and never quit if no user program was loaded. + This allows for much easier driver installation. Use the new "--erase-only" + function of the command line tool to create a clean device. + • New entrymodes have been added. See firmware release notes and source code + comments for details. • All incoming data is now CRC checked to improve robustness. Changes compared to v1.06: • Major size optimization and code reorganization. - • The size was reduced to 1878 bytes, allowing 6314 bytes user space (256 bytes more than in v1.06). + • The size was reduced to 1878 bytes, allowing 6314 bytes user space + (256 bytes more than in v1.06). • The bootloader will disconnect from USB on exit. See release notes (/firmware/releases/release notes.txt) for details. -- cgit v1.2.3