1 files changed, 29 insertions, 34 deletions

diff --git a/firmware/main.c b/firmware/main.c
index 0723c3e..88753a8 100644
--- a/firmware/main.c
+++ b/firmware/main.c
@@ -300,40 +300,37 @@ int main(void) {
   #if AUTO_EXIT_NO_USB_MS	
     ((uint8_t*)&idlePolls)[1]=((AUTO_EXIT_MS-AUTO_EXIT_NO_USB_MS) * 10UL)>>8; // write only high byte to save 6 bytes
   #endif	
-
   
-    if (bootLoaderStartCondition()) {
+//    if (bootLoaderStartCondition()||(pgm_read_byte(BOOTLOADER_ADDRESS - TINYVECTOR_RESET_OFFSET + 1)==0xff)) {
+  if (bootLoaderStartCondition()) {
+  
+    initHardware();        
+    LED_INIT();
     
-        initHardware();
-        
-#       if  LED_PRESENT
-            LED_INIT();
-#       endif     	
-        do {
-            clearEvents();
-			usbPoll();
-            _delay_us(100);
-
-                // these next two freeze the chip for ~ 4.5ms, breaking usb protocol
-                // and usually both of these will activate in the same loop, so host
-                // needs to wait > 9ms before next usb request
-                if (isEvent(EVENT_ERASE_APPLICATION)) eraseApplication();
-                if (isEvent(EVENT_WRITE_PAGE)) {
-                    _delay_us(2000); // Wait for USB traffic to finish before halting CPU with write-
-                    writeFlashPage();  
-                }
-
-      #if  LED_PRESENT
-        LED_MACRO( ((uint8_t*)&idlePolls)[1] )
-      #endif
+    do {
+      clearEvents();
+      usbPoll();
       
-            idlePolls++;
-            // Try to execute program if bootloader exit condition is met
-            if (!bootLoaderCondition()) fireEvent(EVENT_EXECUTE);
-
-              /* main event loop runs as long as no problem is uploaded or existing program is not executed */                           
-        } while((!isEvent(EVENT_EXECUTE))||(pgm_read_byte(BOOTLOADER_ADDRESS - TINYVECTOR_RESET_OFFSET + 1)==0xff));  
-    }
+      _delay_us(100);
+
+      // these next two freeze the chip for ~ 4.5ms, breaking usb protocol
+      // and usually both of these will activate in the same loop, so host
+      // needs to wait > 9ms before next usb request
+      if (isEvent(EVENT_ERASE_APPLICATION)) eraseApplication();
+      if (isEvent(EVENT_WRITE_PAGE)) {
+          _delay_us(2000); // Wait for USB traffic to finish before halting CPU with write-
+          writeFlashPage();  
+      }
+
+      LED_MACRO( ((uint8_t*)&idlePolls)[1] )
+
+      idlePolls++;
+      // Try to execute program if bootloader exit condition is met
+      if (AUTO_EXIT_MS&&(idlePolls>AUTO_EXIT_MS*10)) fireEvent(EVENT_EXECUTE);
+
+      /* main event loop runs as long as no problem is uploaded or existing program is not executed */                           
+    } while((!isEvent(EVENT_EXECUTE))||(pgm_read_byte(BOOTLOADER_ADDRESS - TINYVECTOR_RESET_OFFSET + 1)==0xff));  
+  }
     
     // set clock prescaler to desired clock speed (changing from clkdiv8, or no division, depending on fuses)
     #if LOW_POWER_MODE
@@ -346,9 +343,7 @@ int main(void) {
         #endif
     #endif
     
-  #if LED_PRESENT
-    LED_EXIT();
-  #endif
+  LED_EXIT();
     
   #if OSCCAL_RESTORE
     OSCCAL=osccal_default;