diff options
Diffstat (limited to 'Readme.txt')
| -rw-r--r-- | Readme.txt | 16 |
1 files changed, 10 insertions, 6 deletions
@@ -42,12 +42,12 @@ To allow maximum flexibility, micronucleus supports a configuration system. To c Currently, the following configurations are included and tested. Please check the subfolders /firmware/configurations/ for details. Hex files can be found in /releases. -t84_default - ATtiny84A default configuration - 1556 bytes -t841_default - ATtiny841 default configuration - 1608 bytes -t85_default - ATtiny85 default configuration - 1610 bytes -t85_aggressive - ATtiny85 smaller size - critical - 1418 bytes -t167_default - ATtiny167 default (uses xtal) - 1414 bytes -Nanite841 - Nanite841 firmware - 1632 bytes +t84_default - ATtiny84A default configuration - 1560 bytes +t841_default - ATtiny841 default configuration - 1612 bytes +t85_default - ATtiny85 default configuration - 1614 bytes +t85_aggressive - ATtiny85 smaller size - critical - 1422 bytes +t167_default - ATtiny167 default (uses xtal) - 1418 bytes +Nanite841 - Nanite841 firmware - 1634 bytes You can add your own configuration by adding a new folder to /firmware/configurations/. The folder has to contain a customized "Makefile.inc" and "bootloaderconfig.h". Feel free to supply a pull request if you added and tested a previously unsupported device. @@ -102,6 +102,10 @@ Changes connected to a USB3.0 port. - Fixes one bug that could lead to a deadlock if no USB was connected while the bootloader was active and noise was injected into the floating D+ input. + - D- line is released before the user program is started, instead of pulling it down. + This solves various issues where Micronucleus was not recognized after a reset. + Att: This may lead to a "Unknown device" pop-up in Windows, if the user program does + not have USB functionality itself. Credits ======= |