experimental build with pin0 as boot button pin

1 files changed, 17 insertions, 16 deletions

diff --git a/firmware/bootloaderconfig.h b/firmware/bootloaderconfig.h
index f3dc5d8..25773da 100644
--- a/firmware/bootloaderconfig.h
+++ b/firmware/bootloaderconfig.h
@@ -213,15 +213,15 @@ these macros are defined, the boot loader uses them.
 // set clock prescaler to a value before running user program
 //#define SET_CLOCK_PRESCALER _BV(CLKPS0) /* divide by 2 for 8mhz */
 
-#define bootLoaderCondition()   (idlePolls < (AUTO_EXIT_MS * 10UL))
-#if LOW_POWER_MODE
+
+/*#if LOW_POWER_MODE
   // only starts bootloader if USB D- is pulled high on startup - by putting your pullup in to an external connector
   // you can avoid ever entering an out of spec clock speed or waiting on bootloader when that pullup isn't there
   #define bootLoaderStartCondition() \
     (PINB & (_BV(USB_CFG_DMINUS_BIT) | _BV(USB_CFG_DMINUS_BIT))) == _BV(USB_CFG_DMINUS_BIT)
 #else
   #define bootLoaderStartCondition() 1
-#endif
+#endif*/
 
 /* ----------------------- Optional MCU Description ------------------------ */
 
@@ -240,23 +240,24 @@ these macros are defined, the boot loader uses them.
 /* #define USB_INTR_PENDING_BIT    INTF0 */
 /* #define USB_INTR_VECTOR         INT0_vect */
 
+// todo: change to pin 5
+#define DEUXVIS_JUMPER_PIN 0
+#define digitalRead(pin) ((PINB >> pin) & 0b00000001)
+#define bootLoaderStartCondition() (!digitalRead(DEUXVIS_JUMPER_PIN))
+#define bootLoaderCondition()   (1)
+
 #ifndef __ASSEMBLER__   /* assembler cannot parse function definitions */
 
-static inline void  bootLoaderInit(void)
-{
-#ifndef TINY85MODE
-    PORTD |= (1 << JUMPER_BIT);     /* activate pull-up */
-    if(!(MCUCSR & (1 << EXTRF)))    /* If this was not an external reset, ignore */
-        leaveBootloader();
-    MCUCSR = 0;                     /* clear all reset flags for next time */
-#endif
+static inline void  bootLoaderInit(void) {
+  // DeuxVis pin-5 pullup
+  DDRB |= _BV(DEUXVIS_JUMPER_PIN); // is an input
+  PORTB |= _BV(DEUXVIS_JUMPER_PIN); // has pullup enabled
 }
 
-static inline void  bootLoaderExit(void)
-{
-#ifndef TINY85MODE
-    PORTD = 0;                      /* undo bootLoaderInit() changes */
-#endif
+static inline void  bootLoaderExit(void) {
+  // DeuxVis pin-5 pullup
+  PORTB = 0;
+  DDRB = 0;
 }
 
 #endif /* __ASSEMBLER__ */